Summary of Content for Mitsubishi GOT1000 1D7M08 Adaptor User's Manual PDF
User's Manual GT05-MEM-16MC GT05-MEM-1GC GT05-MEM-32MC GT05-MEM-2GC GT05-MEM-64MC GT05-MEM-4GC GT05-MEM-128MC GT05-MEM-8GC GT05-MEM-256MC GT05-MEM-16GC GT05-MEM-512MC GT05-MEM-ADPC
Thank you for choosing Mitsubishi Electric Graphic Operation Terminal (GOT).
2004 MITSUBISHI ELECTRIC CORPORATION
GOT1000 Series CF Card /Memory Card Adaptor
Prior to use, please read both this manual and detailed manual thoroughly to fully understand the product.
SAFETY PRECAUTIONS (Always read these precautions before using this equipment.)
Before using this product, please read this manual and the relevant manuals introduced in this manual carefully and pay full attention to safety to handle the product correctly. The precautions given in this manual are concerned with this prod- uct. In this manual, the safety precautions are ranked as "DANGER" and "CAUTION".
Note that the CAUTION level may lead to a serious accident according to the circumstances. Always follow the precautions of both levels because they are import- ant to personal safety. Please save this manual to make it accessible when required and always forward it to the end user.
Indicates that incorrect handling may cause hazardous conditions, resulting in death or severe injury.
Indicates that incorrect handling may cause hazardous conditions, resulting in medium or slight personal injury or physical damage.
Make sure to transport the GOT main unit and/or relevant unit(s) in the manner they will not be exposed to the impact exceeding the impact resistance described in the general specifications of the User's Manual for the GOT used, as they are precision devices. Failure to do so may cause the unit to fail. Check if the unit operates correctly after transportation.
[STARTUP AND MAINTENANCE PRECAUTIONS]
The following shows manuals relevant to this product.
For relevant manuals, refer to the PDF manuals stored in the DVD- ROM for the drawing software used.
Compliance with the EMC and Low Voltage Directives
To configure a system meeting the requirements of the EMC and Low Voltage Directives when incorporating the Mitsubishi GOT (EMC and Low Voltage Directives compliant) into other machinery or equipment, refer to "EMC AND LOW VOLTAGE DIRECTIVES" of the General Description included with the GOT used.
The CE mark, indicating compliance with the EMC and Low Voltage Directives, is printed on the rating plate of the GOT.
Before installing/removing the CF card into/from the GOT, be sure to set the CF card access switch to OFF to turn off the CF card access LED. Failure to do so may cause data corruption or malfunction.
When ejecting the CF card, support it by hand since it may pop out. Failure to do so may cause a fall of the CF card leading to failure or damage of the card.
Use the CF card and memory card adaptor in the environment that satisfies the general specifications described in the User's Manual for the GOT used. Not doing so can cause an electric shock, fire, malfunction or product damage or deterioration.
Never disassemble or modify the CF card and memory card adaptor. To do so may cause a failure, malfunction, injury or fire.
Before touching the CF card or memory card adaptor, be sure to touch grounded metal or similar object to discharge the static electricity from human body. Failure to do so may cause a malfunction or failure of the unit.
Dispose of this product as industrial waste.
Manual name Manual number (Model code)
GT16User's Manual (Hardware) (Sold separately)
GT16User's Manual (Basic Utility) (Sold separately)
GT15 User's Manual (Sold separately)
GT11 User's Manual (Sold separately)
GT11 Handy GOT User's Manual (Sold separately)
Compliance with the new China RoHS directive GOT
SJ/T11364 : GB/T26572
Referenced Standard: GB/T15969.2 (Requirement of Chinese standardized law)
Packing List The following items are included.
This User's Manual describes the GOT1000 series CF card and memory card adaptor (hereinafter referred to as the CF card and memory card adaptor). By installing the CF card, OS and project data can be transferred and functions can be increased. Refer to the User's Manual for the GOT used for the applicable GOT. Refer to GT Designer2 Version Basic Operation/Data Transfer Manual for transfer of the OS and project data. Refer to GT Designer2 Version Screen Design Manual for the increased functions. The memory card adaptor converts the CF card into a memory card (TYPE II).
The performance specifications of the CF card and memory card adaptor are indicated below. The general specifications of the CF card and memory card adaptor are the same as those of the GOT.
Note: This symbol mark is for China only.
Model Product Quantity
GT05-MEM-16MC, GT05-MEM-32MC, GT05-MEM-64MC, GT05-MEM-128MC, GT05-MEM-256MC, GT05-MEM-512MC, GT05-MEM-1GC, GT05-MEM-2GC, GT05-MEM-4GC, GT05-MEM-8GC, GT05-MEM-16GC
CF card 1
GOT1000 Series CF Card/Memory Card Adaptor User's Manual (This manual)
Memory card adaptor 1
GOT1000 Series CF Card/Memory Card Adaptor User's Manual (This manual)
Refer to the User's Manual for the GOT used for the general specifications of the GOT.
*1: A CF card with more than 2GB can be used for the GT16 with the following versions of OSes installed. Boot OS version: 05.09.00AF or later Standard monitor OS version: 05.09.00 or later If the above versions of OSes are not installed, install the OSes to the GOT by using GT Designer3 Version1.15R or later. If the OS version is earlier than the above OS versions, a CF card with more than 2GB is not recognized correctly. GT Designer2 Version is not supported.
3. PART NAMES AND EXTERNAL DIMENSIONS
(1) CF card
Unit: mm (inch)
Model Memory capacity
Number of write times
GT05-MEM-16MC 16M bytes
GT05-MEM-32MC 32M bytes
GT05-MEM-64MC 64M bytes
GT05-MEM-128MC 128M bytes
GT05-MEM-256MC 256M bytes
GT05-MEM-512MC 512M bytes
GT05-MEM-1GC 1G bytes
GT05-MEM-2GC 2G bytes
GT05-MEM-4GC 4G bytes *1 X X
GT05-MEM-8GC 8G bytes *1 X X
GT05-MEM-16GC 16G bytes *1 X X
GT05-MEM-ADPC - - 0.02kg (0.05lb)
- - -
When formatting a CF card with more than 2GB by using a personal computer, format the CF card to FAT32.
No. Name Description
1) Connector For connecting the CF card interface of the GOT
2) Rating plate -
MADE IN JAPAN
MITSUBISHI ELECTRIC CORPORATION
(2) Memory card adaptor
Unit: mm (inch)
4. INSTALLING AND RREMOVING PROCEDURES
The installation and removing procedures for the CF card is explained using the GT1575.
4.1 Installing the CF Card
(1) Turn the CF card access switch of the GOT off.
No. Name Description
1) Connector For connecting the memory card interface of the personal computer
2) Rating plate -
MADE IN JAPAN
(2) Open the cover of the CF card interface. Insert and install the CF card into the CF card interface with its front side outside. *1
*1 CF card eject button For the following GOTs, after installing the CF card, turn the CF card eject button to 90 degree while being pulled. GT1585-S, GT1575-S: Hardware version B (April, 2005) or earlier GT1575-V, GT1565-V: Hardware version D (April, 2005) or earlier
(3) Close the cover of the CF card interface. Set the CF card access switch to ON.
4.2 Removing the CF Card
(1) Turn the CF card access switch of the GOT off, and make sure that the CF card access LED has been turned off. (When the CF card access LED turns off, the CF card can be removed even during the GOT power on.)
(2) Push the CF card eject button of the GOT. *2 (The CF card eject button is pulled out after pushing at once.)
CF Card top face
*2 CF card eject button For the following GOTs, after opening the cover of the CF card interface, raise the CF card eject but- ton. GT1585-S, GT1575-S: Hardware version B (April, 2005) or earlier GT1575-V, GT1565-V: Hardware version D (April, 2005) or earlier
(3) Push the CF card eject button of the GOT to lift the CF card and remove it.
4.3 Precautions for Installing and Removing the CF Card
(1) While the CF card access LED is on, do not install/ remove the CF card or power off the GOT. To do so may cause data corruption or malfunction.
(2) When ejecting the CF card, support it by hand since it may pop out. Failure to do so may cause a fall of the CF card leading to failure or damage of the card.
Warranty Mitsubishi Electric will not be held liable for damage caused by factors found not to be the cause of Mitsubishi Electric; machine damage or lost profits caused by faults in the Mitsubishi Electric products; damage, secondary damage, accident compensation caused by special factors unpredictable by Mitsubishi Electric; damages to products other than Mitsubishi Electric products; and to other duties.
For safe use This product has been manufactured as a general-purpose part for
general industries, and has not been designed or manufactured to be incorporated in a device or system used in purposes related to human life.
Before using the product for special purposes such as nuclear power, electric power, aerospace, medicine or passenger movement vehicles, consult with Mitsubishi Electric.
This product has been manufactured under strict quality control. However, when installing the product where major accidents or losses could occur if the product fails, install appropriate backup or failsafe functions in the system.
Country/Region Sales office/Tel Mitsubishi Electric Automation, Inc. 500 Corporate Woods Parkway, Vernon Hills, IL 60061, U.S.A. Tel: +1-847-478-2100 Mitsubishi Electric do Brasil Comercio e Servicos Ltda. Avenida Adelino Cardana, 293, 21 andar, Bethaville, Barueri SP, Brasil CEP 06401-147 Tel: +55-11-4689-3000 Mitsubishi Electric Automation, Inc. Mexico Branch Mariano Escobedo #69, Col. Zona Industrial, Tlalnepantla Edo. Mexico, C.P.54030 Tel: +52-55-3067-7511 Mitsubishi Electric Europe B.V. German Branch Mitsubishi-Electric-Platz 1, 40882 Ratingen, Germany Tel: +49-2102-486-0 Mitsubishi Electric Europe B.V. UK Branch Travellers Lane, Hatfield, Hertfordshire, AL10 8XB, U.K. Tel: +44-1707-28-8780 Mitsubishi Electric Europe B.V. Italian Branch Centro Direzionale Colleoni - Palazzo Sirio, Viale Colleoni 7, Agrate Brianza (MB), Italy Tel: +39-039-60531 Mitsubishi Electric Europe B.V. Spanish Branch Carretera de Rubi 76-80-Apdo.420, 08190 Sant Cugat del Valles (Barcelona), Spain Tel: +34-935-65-3131 Mitsubishi Electric Europe B.V. French Branch 25, Boulevard des Bouvets, 92741 Nanterre Cedex, France Tel: +33-1-55-68-55-68 Mitsubishi Electric Europe B.V. Czech Branch Avenir Business Park, Radlicka 751/113e, 158 00 Praha 5, Czech Republic Tel: +420-251-551-470 Mitsubishi Electric Turkey A.S. Umraniye Branch Serifali Mahallesi Nutuk Sokak No:5, TR-34775 Umraniye / Istanbul, Turkey Tel: +90-216-526-3990 Mitsubishi Electric Europe B.V. Polish Branch ul. Krakowska 50, 32-083 Balice, Poland Tel: +48-12-347-65-00 Mitsubishi Electric (Russia) LLC St. Petersburg Branch Piskarevsky pr. 2, bld 2, lit Sch, BC Benua, office 720; RU-195027 St. Petersburg, Russia Tel: +7-812-633-3497 Adroit Technologies 20 Waterford Office Park, 189 Witkoppen Road, Fourways, Johannesburg, South Africa Tel: +27-11-658-8100 Mitsubishi Electric Automation (China) Ltd. No.1386 Hongqiao Road, Mitsubishi Electric Automation Center, Shanghai, China Tel: +86-21-2322-3030 SETSUYO ENTERPRISE CO., LTD. 6F, No.105, Wugong 3rd Road, Wugu District, New Taipei City 24889, Taiwan Tel: +886-2-2299-2499 Mitsubishi Electric Automation Korea Co., Ltd. 7F-9F, Gangseo Hangang Xi-tower A, 401, Yangcheon-ro, Gangseo-Gu, Seoul 07528, Korea Tel: +82-2-3660-9530 Mitsubishi Electric Asia Pte. Ltd. 307 Alexandra Road, Mitsubishi Electric Building, Singapore 159943 Tel: +65-6473-2308 Mitsubishi Electric Factory Automation (Thailand) Co., Ltd. 12th Floor, SV.City Building, Office Tower 1, No. 896/19 and 20 Rama 3 Road, Kwaeng Bangpongpang, Khet Yannawa, Bangkok 10120, Thailand Tel: +66-2682-6522 to 31 PT. Mitsubishi Electric Indonesia Gedung Jaya 11th Floor, JL. MH. Thamrin No.12, Jakarta Pusat 10340, Indonesia Tel: +62-21-3192-6461 Mitsubishi Electric Vietnam Co., LTD. Ho Chi Minh Head Office Unit 01-04, 10th Floor, Vincom Center, 72 Le Thanh Ton Street, District 1, Ho Chi Minh City, Vietnam Tel: +84-8-3910-5945 Mitsubishi Electric India Pvt. Ltd. Pune Branch Emerald House, EL -3, J Block, M.I.D.C., Bhosari, Pune - 411026, Maharashtra, India Tel: +91-20-2710-2000 Mitsubishi Electric Australia Pty. Ltd. 348 Victoria Road, P.O. Box 11, Rydalmere, N.S.W. 2116, Australia Tel: +61-2-9684-7777
HEAD OFFICE : TOKYO BUILDING, 2-7-3 MARUNOUCHI, CHIYODA-KU, TOKYO
If you want to find out how the GOT1000 Mitsubishi works, you can view and download the Mitsubishi GOT1000 1D7M08 Adaptor User's Manual on the Manualsnet website.
Yes, we have the User's Manual for Mitsubishi GOT1000 as well as other Mitsubishi manuals. All you need to do is to use our search bar and find the user manual that you are looking for.
The User's Manual should include all the details that are needed to use a Mitsubishi GOT1000. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.
The best way to navigate the Mitsubishi GOT1000 1D7M08 Adaptor User's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.
This Mitsubishi GOT1000 1D7M08 Adaptor User's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.
You can download Mitsubishi GOT1000 1D7M08 Adaptor User's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.
To be able to print Mitsubishi GOT1000 1D7M08 Adaptor User's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Mitsubishi GOT1000 1D7M08 Adaptor User's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.