Mitsubishi Motors MZ575683EX Installation Instructions PDF

1 of 2
1 of 2

Summary of Content for Mitsubishi Motors MZ575683EX Installation Instructions PDF

JI261344 10.1

(10B1084)

ASX / OUTLANDER SPORT FOG LAMP BEZEL (CHROME-PLATED)

MZ575683EX INSTALLATION AND HANDLING INSTRUCTIONS

This product is used in combination with the fog lamps sold separately.

Thank you for purchasing the Mitsubishi Genuine Accessory. To install and use the product correctly with proper knowledge of it, read this publication carefully. Keep this publication for reference when maintenance is required.

This publication gives precautionary instructions in the boxes titled as follows. Read through these instructions thoroughly.

Describes precautions that should be observed in order to prevent injury or damage to the vehicle or its components, which may occur if sufficient care is not taken.

Provides additional information that facilitates installation work.

Failure to follow these instructions not only prevents the product from working properly but may lead to trou- ble with the vehicle. Be sure to follow all instructions carefully.

If there is anything unclear about the installation, handling and/or usage of the product, contact your Mitsubi- shi Motors dealer for clarification.

Mitsubishi Motors Corporation is not responsible for any defects or difficulties caused by or resulting from the failure to follow given instructions.

We recommend you to have the installation performed at an authorized Mitsubishi Motors dealer.

Fog lamp bezel

Attention

To the dealer: Be sure that the customer receives this publication.

Caution

Note

-2-

j TOOLS (Make the following tools ready for use.)

j COMPONENTS (Make sure that all of the following components were included in the kit.)

j PRECAUTIONS Be sure to apply the parking brake securely. Remove the ignition key from the key cylinder. The drawing in the Installation Procedures depict the installation of the left side part. Install the right side part

in the same manner.

INSTALLATION PROCEDURES A. INSTALLING THE FOG LAMP

BEZEL 1) Install the fog lamps (sold separately).

2) Install the fog lamp bezels to the front bumper in place of the removed front bumper garnishes (and front fog lamp covers).

B. CHECKING AFTER INSTALLATION 1) Check that the bezels are installed properly and securely.

CARE AND HANDLING To clean the product, wipe with soft material, such as sponge or chamois leather. Do not use any hard material for cleaning, such as a scrubbing brush. It could scratch the surface. Do not use wax with abrasive. It could damage the surface. Take care to prevent contact with gasoline, kerosene, brake fluid, engine oil, grease, paint thinner, sulfuric

acid (battery electrolyte) and wax remover that could cause discoloration, staining and cracking. Should any of

Manualsnet FAQs

If you want to find out how the MZ575683EX Mitsubishi MOTORS works, you can view and download the Mitsubishi Motors MZ575683EX Installation Instructions on the Manualsnet website.

Yes, we have the Installation Instructions for Mitsubishi MOTORS MZ575683EX as well as other Mitsubishi MOTORS manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Installation Instructions should include all the details that are needed to use a Mitsubishi MOTORS MZ575683EX. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Mitsubishi Motors MZ575683EX Installation Instructions is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Mitsubishi Motors MZ575683EX Installation Instructions consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Mitsubishi Motors MZ575683EX Installation Instructions free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Mitsubishi Motors MZ575683EX Installation Instructions, simply download the document to your computer. Once downloaded, open the PDF file and print the Mitsubishi Motors MZ575683EX Installation Instructions as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.