Mitsubishi Electric GT16M V4, GT16M V4R1, MR2 User's Manual PDF

1 of 1
1 of 1

Summary of Content for Mitsubishi Electric GT16M V4, GT16M V4R1, MR2 User's Manual PDF

User's Manual

GT16M-V4 GT16M-V4R1 GT16M-R2

Thank you for choosing Mitsubishi Electric Graphic Operation Terminal (GOT).

2008 MITSUBISHI ELECTRIC CORPORATION

GT16 Video/RGB Input Unit

Prior to use, please read both this manual and detailed manual thoroughly to fully understand the product.

MODEL GT16M-V4R1-U

MODEL CODE

1D7M85

IB(NA)-0800431-I(1806)MEE

SAFETY PRECAUTIONS (Always read these precautions before using this equipment.)

Before using this product, please read this manual and the relevant manuals introduced in this manual carefully and pay full attention to safety to handle the product correctly. The precautions given in this manual are concerned with this prod- uct. In this manual, the safety precautions are ranked as "WARNING" and "CAUTION".

Note that the CAUTION level may lead to a serious accident according to the circumstances. Always follow the precautions of both levels because they are import- ant to personal safety. Please save this manual to make it accessible when required and always forward it to the end user.

Indicates that incorrect handling may cause hazardous conditions, resulting in death or severe injury.

Indicates that incorrect handling may cause hazardous conditions, resulting in medium or slight personal injury or physical damage.

WARNING

CAUTION

[DESIGN PRECAUTIONS]

[INSTALLATION PRECAUTIONS]

[WIRING PRECAUTIONS]

[STARTUP AND MAINTENANCE PRECAUTIONS]

Do not bunch the control wires or communication cables with the main circuit or power wires, or lay them close to each other. As a guide, separate the lines by a distance of at least 100mm (3.94 inches) otherwise malfunctions may occur due to noise.

Be sure to shut off all phases of the external power supply used by the system before mounting or removing this unit to/from the GOT. Not doing so can cause a unit failure or malfunction.

Before connecting the Bus connection cable to this unit, always shut off GOT power and PLC CPU power externally in all phases.Not doing so can cause a malfunction.

Use this unit in the environment that satisfies the general specifications described in the User's Manual for the GOT used. Not doing so can cause an electric shock, fire, malfunction or product damage or deterioration.

Do not drop the unit or subject it to string shock. A unit damage may result.

When installing this unit to the GOT, fit it to the connection interface of the GOT and tighten the mounting screws in the specified torque range. Undertightening can cause a drop, failure or malfunction. Overtightening can cause a drop, failure or malfunction due to screw or unit damage.

Be sure to shut off all phases of the external power supply used by the system before wiring. Failure to do so may result in an electric shock, product damage or malfunctions.

Exercise care to avoid foreign matter such as chips and wire offcuts entering the unit. Not doing so can cause a fire, failure or malfunction.

Make sure to securely connect the cable to the connector of unit. Incorrect connection may cause malfunctions.

Before starting cleaning, always shut off GOT power externally in all phases. Not doing so can cause a unit failure or malfunction. Undertightening can cause the GOT to drop, short circuit or malfunction. Overtightening can cause a short circuit or malfunction due to the damage of the screws or unit.

Do not disassemble or modify any unit. This will cause failure, malfunction, injuries, or fire.

Do not touch the conductive areas and electronic parts of this unit directly. Doing so can cause a unit malfunction or failure.

Always secure the cables connected to the unit, e.g. run them in conduits or clamp them. Not doing so can cause unit or cable damage due to dangling, moved or accidentally pulled cables or can cause a malfunction due to a cable contact fault.

Do not hold the cable part when unplugging any cable connected to the unit. Doing so can cause unit or cable damage or a malfunction due to a cable contact fault.

CAUTION

WARNING

CAUTION

WARNING

CAUTION

WARNING

CAUTION

[DISPOSAL PRECAUTIONS]

[TRANSPORTATION PRECAUTIONS]

Manual The following shows manuals relevant to this product.

For relevant manuals, refer to the PDF manuals stored in the DVD- ROM for the drawing software used.

Compliance with the EMC and Low Voltage Directives To configure a system meeting the requirements of the EMC and Low Voltage Directives when incorporating the Mitsubishi GOT (EMC and Low Voltage Directives compliant) into other machinery or equipment, refer to "EMC AND LOW VOLTAGE DIRECTIVES" of the General Description included with the GOT used. The CE mark, indicating compliance with the EMC and Low Voltage Directives, is printed on the rating plate of the GOT.

Compliance with the new China RoHS directive GOT

6 6

SJ/T11364 : GB/T26572

: GB/T26572

Referenced Standard: GB/T15969.2 (Requirement of Chinese standardized law)

Always make sure to touch the grounded metal to discharge the electricity charged in the body, etc., before touching the unit. Failure to do so may cause a failure or malfunctions of the unit.

Dispose of this product as industrial waste.

Make sure to transport the GOT main unit and/or relevant unit(s) in the manner they will not be exposed to the impact exceeding the impact resistance described in the general specifications of the User's Manual for the GOT used, as they are precision devices. Failure to do so may cause the unit to fail. Check if the unit operates correctly after transportation.

Detailed Manual

Manual name Manual number (Model code)

GT16 User's Manual (Hardware) (Sold separately)

SH-080928ENG (1D7MD3)

GT16 User's Manual (Basic Utility) (Sold separately)

SH-080929ENG (1D7MD4)

GOT1000 Series Connection Manual (Microcomputer, MODBUS Products, Peripherals) for GT Works3 (Sold separately)

SH-080871ENG (1D7MC5)

GT Designer3 Version1 Screen Design Manual (Functions) (Sold separately)

SH-080867ENG (1D7MC1)

Relevant Manuals

Note: This symbol mark is for China only.

Pb

Hg

Cd

Cr(VI)

PBB

PBDE

CAUTION

CAUTION

CAUTION

Packing List After unpacking the box, check that the following products are included.

Precaution for using the unit with the function version B or later The extended function OS (Video/RGB) installed in GT Works3 with less than Version 1.73B cannot recognize the unit with the function version B or later, thus the unit is not properly operated. When using the unit with the function version B or later, use the extended function OS (Video/RGB) with version 05.59.00 or later under GT Works3 Version 1.73B or later.

1. OVERVIEW This User's Manual describes the following units. When mounting the following units with the GT16 M, the GOT can display video images taken by a camcorder or a RGB screen. For the GT16M-V4 video input unit (hereinafter referred to as the video input unit), the GOT can display video images taken by up to four camcorders. For the GT16M-V4R1 video/RGB input unit (hereinafter referred to as the video/RGB input unit), the GOT can display video images taken by up to four camcorders or a RGB screen for up to one device for the RGB input. For the GT16M-R2 RGB input unit (hereinafter referred to as the RGB input unit), the GOT can display only one RGB screen by switching up to two video input channels. For the video input with using the above units, the GOT can be used as a vision sensor monitor. For the RGB input unit with using the above units, the units can be used as the RGB output type vision sensor.

*1:Power on the GOT simultaneously with the camcorder. *2:Depending on the camcorder type, noise from the power supply cable of the camcorder may cause malfunction of the GOT or a programmable controller. In this case, attach the following line filter to the power supply line of the camcorder. Recommended line filter: TDK ZHC2203-11 (or equivalent products) *3:When connecting any of the above units to a personal computer, ground the ground cable of the personal computer.

To use the video input unit, video/RGB input unit, and RGB input unit set the communication settings. For the settings and system configurations, refer to GOT1000 Series Connection Manual. For video input and RGB input functions, refer to GT Designer2 Version Screen Design Manual.

Model Product Quantity

GT16M-V4

Video input unit 1

Mounting screw set (4 screws, 4 stickers) 1

Extension interface relay board 1

GT16 Video/RGB Input Unit User's Manual (This manual)

1

GT16M-V4R1

Video/RGB input unit 1

Mounting screw set (4 screws, 4 stickers) 1

Extension interface relay board 1

GT16 Video/RGB Input Unit User's Manual (This manual)

1

GT16M-R2

RGB input unit 1

Mounting screw set (4 screws, 4 stickers) 1

Extension interface relay board 1

GT16 Video/RGB Input Unit User's Manual (This manual)

1

A 1254

348B

GOT

GT16M-V4R1

Camcorder

Computer PLCs for line control

*1 *1*2

*3

2. SPECIFICATIONS

The performance specifications of the video input unit, video/RGB

input unit, and RGB input unit are indicated below.

The general specifications of the video input unit, video/RGB input

unit, and RGB input unit are the same as those of the GOT.

Refer to the User's Manual for the GOT used for the general

specifications of the GOT.

*1:Compatible with PAL and CCIR formats only. *2:The GOT cannot display both video images and RGB screens at the same time. *3:The GOT can display only one RGB screen.

Item

Specifications

GT16M- V4

GT16M- V4R1

GT16M-R2

Video input section *2

Video input format

Color NTSC format, PAL format(interlaced format)

-

Monoc hrome

EIA format, CCIR format (interlaced format)

-

Number of video input channels

4 channel -

Input signal IVp-p, 75 , composite signal

-

Display size (dot) 640 480 768 576, 720 480*1 -

Connector for external connection

BNC connector -

RGB input section

RGB input method (dot)

- Analog RGB(XGA; 1024 768, SVGA; 800 600, VGA;640 480)

Number of video input channels

- 1 channel 2 channels*3

Input image signal

- 1Vp-p, 75

Synchronizing signal

- TTL, 1k

Display size (dot) -

1024 768 (refresh rate 60Hz) 800 600 (refresh rate 60, 72, 75Hz) 640 480 (refresh rate 60, 72, 75, 85Hz)

Connector for external connection

- D-Sub15 pin: female

Internal current consumption

3.3 VDC

0.32A 0.94A 0.75A

5.0 VDC

0.12A 0.12A -

Weight 0.20kg (0.44Ib)

0.22kg (0.49Ib)

0.17kg (0.37Ib)

3. PART NAMES AND EXTERNAL DIMENSIONS

3.1 Video/RGB Input Unit, Video Input Unit, and RGB Input Unit The external dimensions for all the units are the same except the connector dimensions of the video input section and the RGB input section.

3.2 Extension Interface Relay Board

No. Name Description

1) Connector for video input

Connector for connecting a coaxial cable

2) Connector for RGB input

Connector for connecting 9-core combined cables

3) Interface connector

Connector connected to the GOT

4) Extension connector

Connector for connecting an extension unit

5) Board fixing screw

Screw for fixing the extension interface relay board

6) Mounting screw Screw for fixing the unit

7) Rating plate -

8. 5

(0 .3

3) 8.

5 (0

.3 3)

8. 0

(0 .3

1) 8.

0 (0

.3 1)

26.0 (1.02)

34 (1.34)

18 (0.71)

18 (0.71)

19 (0.75)

19 (0.75)

34 (1.34)

18 (0.71)

18 (0.71)

45 (1.77)

21 .5

(0 .8

5)

30 .5

(1 .2

0) 21

.5 (0

.8 5)

30 .5

(1 .2

0) 21

.5 (0

.8 5)

30 .5

(1 .2

0)

19 .5

(0 .7

7)

8. 0

(0 .3

1)

2.5 (0.10)

98 (3

.8 6)

10 5

(4 .1

3)

3 (0.12)

133 (5.24)

68.5 (2.70)

GT16M-V4R1 GOT main unit

Dimensions of X when mounted the GOT

Unit : mm (inch)

Dimensions of XGOT

GT16M-V4R1

GT16M-V4

GT16M-R2

X

6)

1)

1)

5)

7)

2)

3)

3)

3)

2)

15" 19.5 (0.77)

21 (0.83) 18 (0.71)

23 (0.91)

12.1" 10.4" 8.4"

Unit : mm (inch)

4) 6)

64 (2.52)

Unit : mm (inch)

2 4

(0 .9

4 )

2 7

.5

(1 .0

8 )

4. INSTALLATION PROCEDURE

The installation procedure for the video/RGB input unit is explained using the GT1575.

1) Turn off the GOT.

2) Remove two extension unit covers of the GOT.

3) Connect the extension interface relay board to the extend interface2 side on the GOT. Remove the connector cover from the board.

4)The connector for video input has the protection cap. Remove the protection cap for the connector to be used. (Store the removed protection cap.)

5) Fit the video/RGB input unit in the GOT case.

6) Tighten four mounting screws with a torque of 0.36 to 0.48Nm to fix the unit.

7) Tighten two board fixing screws with a torque of 0.36 to 0.48 Nm to fix the board.

8) For mounting any extension unit on the unit, remove the connector cover and the stickers. For mounting no extension unit on the unit, cover over four mounting screws with the accessory stickers to avoid static electricity. Keep the connector cover fixed. Keep all the stickers fixed.

Point

Remove the screws that fixes the extension interface relay board before removing the unit.(Above 7))

3)

Remove the connector cover

5)

6) 7)

Sticker

Accessory sticker

Accessory sticker

Connector cover

Warranty Mitsubishi Electric will not be held liable for damage caused by factors found not to be the cause of Mitsubishi Electric; machine damage or lost profits caused by faults in the Mitsubishi Electric products; damage, secondary damage, accident compensation caused by special factors unpredictable by Mitsubishi Electric; damages to products other than Mitsubishi Electric products; and to other duties.

For safe use This product has been manufactured as a general-purpose part for

general industries, and has not been designed or manufactured to be incorporated in a device or system used in purposes related to human life.

Before using the product for special purposes such as nuclear power, electric power, aerospace, medicine or passenger movement vehicles, consult with Mitsubishi Electric.

This product has been manufactured under strict quality control. However, when installing the product where major accidents or losses could occur if the product fails, install appropriate backup or failsafe functions in the system.

USA

Brazil

Mexico

Germany

UK

Italy

Spain

France

Czech

Turkey

Poland

Russia

South Africa

China

Taiwan

Korea

Singapore

Thailand

Indonesia

Vietnam

India

Australia

Country/Region Sales office/Tel

Mitsubishi Electric Automation, Inc. 500 Corporate Woods Parkway, Vernon Hills, IL 60061, U.S.A. Tel: +1-847-478-2100 Mitsubishi Electric do Brasil Comercio e Servicos Ltda. Avenida Adelino Cardana, 293, 21 andar, Bethaville, Barueri SP, Brasil CEP 06401-147 Tel: +55-11-4689-3000 Mitsubishi Electric Automation, Inc. Mexico Branch Mariano Escobedo #69, Col. Zona Industrial, Tlalnepantla Edo. Mexico, C.P.54030 Tel: +52-55-3067-7511 Mitsubishi Electric Europe B.V. German Branch Mitsubishi-Electric-Platz 1, 40882 Ratingen, Germany Tel: +49-2102-486-0 Mitsubishi Electric Europe B.V. UK Branch Travellers Lane, Hatfield, Hertfordshire, AL10 8XB, U.K. Tel: +44-1707-28-8780 Mitsubishi Electric Europe B.V. Italian Branch Centro Direzionale Colleoni - Palazzo Sirio, Viale Colleoni 7, Agrate Brianza (MB), Italy Tel: +39-039-60531 Mitsubishi Electric Europe B.V. Spanish Branch Carretera de Rubi 76-80-Apdo.420, 08190 Sant Cugat del Valles (Barcelona), Spain Tel: +34-935-65-3131 Mitsubishi Electric Europe B.V. French Branch 25, Boulevard des Bouvets, 92741 Nanterre Cedex, France Tel: +33-1-55-68-55-68 Mitsubishi Electric Europe B.V. Czech Branch Avenir Business Park, Radlicka 751/113e, 158 00 Praha 5, Czech Republic Tel: +420-251-551-470 Mitsubishi Electric Turkey A.S. Umraniye Branch Serifali Mahallesi Nutuk Sokak No:5, TR-34775 Umraniye / Istanbul, Turkey Tel: +90-216-526-3990 Mitsubishi Electric Europe B.V. Polish Branch ul. Krakowska 50, 32-083 Balice, Poland Tel: +48-12-347-65-00 Mitsubishi Electric (Russia) LLC St. Petersburg Branch Piskarevsky pr. 2, bld 2, lit Sch, BC Benua, office 720; RU-195027 St. Petersburg, Russia Tel: +7-812-633-3497 Adroit Technologies 20 Waterford Office Park, 189 Witkoppen Road, Fourways, Johannesburg, South Africa Tel: +27-11-658-8100 Mitsubishi Electric Automation (China) Ltd. No.1386 Hongqiao Road, Mitsubishi Electric Automation Center, Shanghai, China Tel: +86-21-2322-3030 SETSUYO ENTERPRISE CO., LTD. 6F, No.105, Wugong 3rd Road, Wugu District, New Taipei City 24889, Taiwan Tel: +886-2-2299-2499 Mitsubishi Electric Automation Korea Co., Ltd. 7F-9F, Gangseo Hangang Xi-tower A, 401, Yangcheon-ro, Gangseo-Gu, Seoul 07528, Korea Tel: +82-2-3660-9530 Mitsubishi Electric Asia Pte. Ltd. 307 Alexandra Road, Mitsubishi Electric Building, Singapore 159943 Tel: +65-6473-2308 Mitsubishi Electric Factory Automation (Thailand) Co., Ltd. 12th Floor, SV.City Building, Office Tower 1, No. 896/19 and 20 Rama 3 Road, Kwaeng Bangpongpang, Khet Yannawa, Bangkok 10120, Thailand Tel: +66-2682-6522 to 31 PT. Mitsubishi Electric Indonesia Gedung Jaya 11th Floor, JL. MH. Thamrin No.12, Jakarta Pusat 10340, Indonesia Tel: +62-21-3192-6461 Mitsubishi Electric Vietnam Co., LTD. Ho Chi Minh Head Office Unit 01-04, 10th Floor, Vincom Center, 72 Le Thanh Ton Street, District 1, Ho Chi Minh City, Vietnam Tel: +84-8-3910-5945 Mitsubishi Electric India Pvt. Ltd. Pune Branch Emerald House, EL -3, J Block, M.I.D.C., Bhosari, Pune - 411026, Maharashtra, India Tel: +91-20-2710-2000 Mitsubishi Electric Australia Pty. Ltd. 348 Victoria Road, P.O. Box 11, Rydalmere, N.S.W. 2116, Australia Tel: +61-2-9684-7777

HEAD OFFICE : TOKYO BUILDING, 2-7-3 MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN NAGOYA WORKS : 1-14, YADA-MINAMI 5-CHOME, HIGASHI-KU, NAGOYA, JAPAN

When exported from Japan, this manual does not require application to the Ministry of Economy, Trade and Industry for service transaction permission.

Specifications subject to cha

Manualsnet FAQs

If you want to find out how the GT16M V4 Mitsubishi Electric works, you can view and download the Mitsubishi Electric GT16M V4, GT16M V4R1, MR2 User's Manual on the Manualsnet website.

Yes, we have the User's Manual for Mitsubishi Electric GT16M V4 as well as other Mitsubishi Electric manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User's Manual should include all the details that are needed to use a Mitsubishi Electric GT16M V4. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Mitsubishi Electric GT16M V4, GT16M V4R1, MR2 User's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Mitsubishi Electric GT16M V4, GT16M V4R1, MR2 User's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Mitsubishi Electric GT16M V4, GT16M V4R1, MR2 User's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Mitsubishi Electric GT16M V4, GT16M V4R1, MR2 User's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Mitsubishi Electric GT16M V4, GT16M V4R1, MR2 User's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.