1 2EcoMonitor series
EMU4-SD2GB
2GB LY401N926H01
LO C
K
MODEL
Optional SD Memory Card of Logging Unit for Energy Measuring Module (EcoMonitorLight, EcoMonitorPlus) Model EMU4-SD2GB Users Manual Before using this memory card, read both this manual and that for the device this card is connected to carefully, and pay attention to safety to
handle this card correctly. Make sure that the end users read this manual and then keep the manual in a safe place for future reference.
ABOUT MANUALS You can download Users manual for Logging unit that this memory card is connected to for Energy Measuring Unit (EcoMonitorLight, EcoMonitorPlus) from the following site. http://www.mitsubishielectric.co.jp/haisei/lvs/downloads/handling.htm
1. Features
This SD memory card is the optional product of Logging Unit (Model:EMU4-LM) for Energy Measuring Unit (EcoMonitorLight, EcoMonitorPlus). This SD memory card is pre-formatted, so you can use it right out of the box.
The SD logos are either registered trademarks or trademarks of SD-3C, LLC.
2. Checking package contents
These following items for this device are included in package. Check that no items are missing.
(1) SD memory card x 1 (2) Case x 1 (3) Users manual x 1
3. Safety precautions
3.1 Precautions for operating environment and conditions This memory card is premised on being used in pollution degree II* environment. When used in higher pollution degree, protect this card from pollution on another device side to be incorporated. Do not use this card in the places listed below. Failure to follow the instruction may cause malfunctions and a life decrease of the card.
Places the operating temperature exceeds the range from -5 to +55C.
Places the average daily temperature exceeds +35C.
Places the operating humidity exceeds the range from 30 to 85%RH or places with dewfall.
Dust, corrosive gas, saline and oil smoke exist.
Places metal fragments or conductive substance are flying. Operating altitude exceeds 2000m. Places in strong electromagnetic field or places large amounts of
external noise exist. Vibration and impact exceed the specifications.
Places exposed to direct sunlight. Places exposed to rain or water drop. *: For the definition of the pollution degree and the over voltage category, refer to EN61010-1/2010.
3.2 Matters concerning the precaution before use Use this memory card in the specified usage environment and conditions.
3.3 Precautions for use For the way to connect or format this memory card, refer to the Users manual (Details) for the Logging Unit for Energy Measuring Unit (EcoMonitorLight, EcoMonitorPlus).
Caution Do not disassemble or modify this card. It may cause failure, malfunction, injury or fire.
3.4 Maintenance precautions Use a soft dry cloth to clean off dirt of the memory card surface. Do not let a chemical cloth remain on the surface for an extended period of
time nor wipe the surface with thinner or benzine. 3.5 Storage precautions
Put this memory card in the accompanying case for storage. For long-time storage, avoid the following places. Failure to follow the instruction may cause a failure and reduced life of the card.
Places the storage temperature exceeds the range from -10 to +60C.
Places the average daily temperature exceeds +35C.
Places exposed to rain, water drop or direct sunlight. Places the storage humidity exceeds the range from 30 to 85%RH or places with dewfall.
Vibration and impact exceed the specifications. Places metal fragments or conductive substance are flying. Dust, corrosive gas, saline and oil smoke exist.
3.6 Disposal precautions When disposing of this memory card, treat it as industrial waste.
3.7 About packaging materials and this manual For reduction of environment load, packaging materials are produced with cardboard, and this manual is printed on recycled paper.
If you are considering using this card for special purpose such as nuclear power plants, aerospace, medical care or passenger vehicles please refer to our sales representative.
EcoMonitor series
EMU4-SD2GB
2GB LY401N926H01
LO C
K
MODEL
4. Name of each part
No. Name of part Use
(1) Write-protect switch Switch this to LOCK position to prevent from deleting and overwriting data of this memory card.
(2) Memo space Use it to note where this memory card is used etc.
Item Specifications
SD memory card type SD Amount of memory 2GB
External dimensions
H 32mm W 24mm D 2.1mm
Weight 2g
6. After-sales service
If you have any questions or the product is broken down, contact our sales representative near you. The gratis warranty is effective until the earlier of 1 year after the date of your purchase or 18 months after manufacturing.
Repair shall be charged for the case failures occur due to your intent or fault even during the gratis warranty period. Our company shall not be liable to compensate for any loss arising from events not attributable to our company, opportunity
loss and lost earning of the customer due to failure of the product, and loss, secondary loss, accident compensation, damage to other products besides our products and other operations caused by a special reason regardless of our companys predictability.
7Contained harmful substances (1)
)
(2)
6
( Pb)
Hg
Cd
Cr(VI)
PBB
PBDE
SJ/T11364
GB/T 26572
GB/T26572
RoHS
8Customer Service
Please refer to "catalog" or users manual (Details) for