This manual confers no industrial property rights or any rights of any other kind, nor does it confer any patent licenses. Mitsubishi Electric Corporation cannot be held responsible for any problems involving industrial property rights which may occur as a result of using the contents noted in this manual.
Warranty Exclusion of loss in opportunity and secondary loss from warranty liability Regardless of the gratis warranty term, Mitsubishi shall not be liable for compensation to: (1) Damages caused by any cause found not to be the responsibility of Mitsubishi. (2) Loss in opportunity, lost profits incurred to the user by Failures of Mitsubishi products. (3) Special damages and secondary damages whether foreseeable or not, compensation for
accidents, and compensation for damages to products other than Mitsubishi products. (4) Replacement by the user, maintenance of on-site equipment, start-up test run
and other tasks.
For safe use This product has been manufactured as a general-purpose part for general industries, and has not been designed or manufactured to be incorporated in a device or system used in purposes related to human life. Before using the product for special purposes such as nuclear power, electric power, aerospace, medicine or passenger movement vehicles, consult with Mitsubishi Electric. This product has been manufactured under strict quality control. However when installing the product where major accidents or losses could occur if the product fails, install appropriate backup or failsafe functions in the system.
HEAD OFFICE : TOKYO BUILDING, 2-7-3 MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN
Note: This symbol mark is for China only.
6
6
SJ/T 11364
:GB/T 26572
:GB/T 26572
(Pb)
(Hg)
(Cd)
(Cr(VI))
(PBB)
(PBDE)
:GB/T15969.2
Safety Pr This manual cla
Depending on also cause sev It is important t
Associated
This manual des For system con
How to obtain For product m from who you p
Applicable FX3G-8AV-BD Directive (EMC manual.
Manual
FX3S Series Users Manua - Hardware Ed
FX3G Series Users Manua - Hardware Ed
FX3S/FX3G/FX FX3UC Series Programming Basic & Applie Edition
hich can
inches)
over is
3. Specifications
.
dware Edition dware Edition
dware Edition dware Edition
ming Manual
STARTUP AND MAINTENANCE PRECAUTIONS
Do not disassemble or modify the PLC. Doing so may cause fire, equipment failures, or malfunctions. * For repair, contact your local Mitsubishi Electric representative.
Do not drop the product or exert strong impact to it. Doing so may cause damage.
DISPOSAL PRECAUTIONS
Please contact a certified electronic waste disposal company for the environmentally safe recycling and disposal of your device.
TRANSPORTATION AND STORAGE PRECAUTIONS
The product is a precision instrument. During transportation, avoid impacts larger than those specified in the general specifications by using dedicated packaging boxes and shock-absorbing palettes. Failure to do so may cause failures in the product. After transportation, verify operation of the product and check for damage
This manual de of the product products fully t sure to learn al Store this man necessary. Alw Registration: The company trademarks or t
Effective June Specifications a
cribes the specifications and installation details for the FX3G-8AV-BD. figuration, and program examples, refer to the following manuals.
FX3S Series User's Manual - Hardware Edition FX3G Series User's Manual - Hardware Edition
FX3S/FX3G/FX3GC/FX3U/FX3UC Series Programming Manual
manuals anuals or documents, consult with the Mitsubishi Electric dealer urchased your product.
standards units made in November, 2008 or later comply with the EC Directive). Further information can be found in the following
FX3S Series Hardware Manual (Manual No. JY997D48301) FX3G Series Hardware Manual (Manual No. JY997D46001)
l ition
MODEL CODE: 09R521
specifications for I/O, wiring, installation, and maintenance.
3GC/FX3U/ Manual - d Instruction
JY997D16601 MODEL CODE:
09R517
Describes PLC programming for basic/applied instructions and devices.
For the installation, refer to the following manual. FX3S Series User's Manual - Hardware Edition FX3G Series User's Manual - Hardware Edition
not enter the ventilation slits of the PLC. Failure to do so may cause fire, equipment failures or malfunctions.
Do not touch the conductive parts of the product directly. Doing so may cause device failures or malfunctions.
Connect expansion board securely to their designated connectors. Loose connections may cause malfunctions.
ecautions (Read these precautions before use.) ssifies the safety precautions into two categories:
and .
the circumstances, procedures indicated by may ere injury. o follow all precautions for personal safety.
Manuals
Indicates that incorrect handling may cause hazardous conditions, resulting in death or severe injury.
Indicates that incorrect handling may cause hazardous conditions, resulting in medium or slight personal injury or physical damage.
name Manual No. Description
l ition
JY997D48601 MODEL CODE:
09R535
Explains the FX3S Series PLC specifications for I/O, wiring, installation, and maintenance.
JY997D31301 Explains the FX3G Series PLC
2. Installation INSTALLATION PRECAUTIONS
Make sure to cut off all phases of the power supply externally before attempting installation or wiring work. Failure to do so may cause electric shock or damage to the product.
INSTALLATION PRECAUTIONS
Use the product within the generic environment specifications described in PLC main unit manual (Hardware Edition). Never use the product in areas with excessive dust, oily smoke, conductive dusts, corrosive gas (salt air, Cl2, H2S, SO2 or NO2), flammable gas, vibration or impacts, or expose it to high temperature, condensation, or rain and wind. If the product is used in such conditions, electric shock, fire, malfunctions, deterioration or damage may occur.
Use screwdrivers carefully when performing installation work, thus avoiding accident or product damage.
When drilling screw holes or wiring, make sure that cutting and wiring debris do
12
(0.48")
35 (1.38")
Trimmer Layout
[1]
[1]Analog volume [2]Mounting holes (2-3.2) [3]Connector cover [4]Main unit connector [5]Memory cassette/Display module connector
MASS (Weight): Approx. 20 g (0.05 lbs)
VR0 VR3VR2VR1
VR4 VR7VR6VR5
3.1 Applicable PLC
Only one analog volume expansion board can be used per main unit Never stack up two or more expansion boards.
For details on the system configuration, refer to the following manual. FX3S Series User's Manual - Har FX3G Series User's Manual - Har
3.2 General Specifications The general specifications are equivalent to the PLC main unit. For general specifications, refer to the following manuals.
FX3S Series User's Manual - Har FX3G Series User's Manual - Har
3.3 Performance specifications
For instructions, refer to the following manuals. FX3S/FX3G/FX3GC/FX3U/FX3UC Series Program
of the mounting part, etc.
Model name Applicability
FX3S Series PLC Ver. 1.00 or later (from first production)
FX3G Series PLC Ver. 1.10 or later
Item Specification
Analog volume points 8points
Instruction VRRD(FNC 85) Volume Read VRSC(FNC 86) Volume Scale
Digital conversion value VRRD instruction: 0 to 255 VRSC instruction: 0 to 10
and product names described in this manual are registered he trademarks of their respective companies.
2018 re subject to change without notice.
2008 Mitsubishi Electric Corporation
Side A
Side
B JAPANESE
ENGLISH
JY997D33701H
Side B Attention
This product is designed for use in industrial applications.
1. Outline FX3G-8AV-BD is an expansion board equipped with eight analog set points w be used as an analog timer.
1.1 Incorporated Items
1.2 External Dimensions and Part Names
Product Analog volume expansion board FX3G-8AV-BD
Included items
M38 tapping screws for installation: 2 pcs. Trimmer layout label Side cover Installation Manual (This manual)
Unit: mm (
51 .2
(2 .0
2" )
[3]
[2] [4]
[5]
Connector c removed
FX3G-8AV-BD INSTALLATION MANUAL
scribes the part names, dimensions, mounting, and specifications . Before use, read this manu