Contents

Mini Paceman 2014 Owner's Manual PDF

1 of 218
1 of 218

Summary of Content for Mini Paceman 2014 Owner's Manual PDF

Owner's Manual. MINI Countryman. MINI Paceman.

Contents A-Z

Online Edition for Part no. 01 40 2 911 521 - VI/13

COOPER COOPER S

JOHN COOPER WORKS

Owner's Manual for Vehicle Thank you for choosing a MINI. The more familiar you are with your vehicle, the better control you will have on the road. We therefore strongly suggest: Read this Owner's Manual before starting off in your new MINI. It contains important information on vehicle operation that will help you make full use of the technical features available in your MINI. The manual also contains information designed to en hance operating reliability and road safety, and to contribute to maintaining the value of your MINI. Supplementary information can be found in the additional bro chures in the onboard literature. Set off now and have fun with your MINI. The MINI Team of BMW AG

Online Edition for Part no. 01 40 2 911 521 - VI/13

2013 Bayerische Motoren Werke Aktiengesellschaft Munich, Germany Reprinting, including excerpts, only with the written consent of BMW AG, Munich. US English VI/13, 07 13 500 Printed on environmentally friendly paper, bleached without chlorine, suitable for recycling.

Online Edition for Part no. 01 40 2 911 521 - VI/13

Contents The fastest way to find information on a partic ular topic or item is by using the index, refer to page 208.

6 Notes

At a glance 14 Cockpit

Controls 22 Opening and closing 36 Adjusting 44 Transporting children safely 49 Driving 59 Displays 67 Lamps 72 Safety 81 Driving stability control systems 84 Driving comfort 87 Climate 92 Interior equipment 102 Storage compartments

Driving tips 110 Things to remember when driving 114 Loading 118 Saving fuel

Entertainment 122 Radio MINI Boost CD

Communication 136 Telephone

Mobility 148 Refueling 150 Fuel 152 Wheels and tires 164 Engine compartment 166 Engine oil 168 Coolant 169 Maintenance 171 Replacing components 180 Breakdown assistance 186 Care 190 Indicator/warning lamps

Reference 204 Technical data 208 Everything from A to Z

Online Edition for Part no. 01 40 2 911 521 - VI/13

Notes Using this Owner's Manual The fastest way to find information on a partic ular topic is by using the index. An initial overview of the vehicle is provided in the first chapter.

Additional sources of information Should you have any questions, your service center will be glad to advise you at any time. Information on MINI, e.g., on technology, is available on the Internet: www.mini.com

Symbols Indicates precautions that must be followed

precisely in order to avoid the possibility of per sonal injury and serious damage to the vehicle. Marks the end of a specific item of informa tion. "..." Identifies radio display texts used to select individual functions. ... Verbal instructions to use with the voice op eration system. ... Identifies the answers generated by the voice operation system.

Refers to measures that can be taken to help protect the environment.

Symbols on vehicle components Indicates that you should consult the rele

vant section of this Owner's Manual for infor mation on a particular part or assembly.

Vehicle equipment The manufacturer of your MINI is the Bayeri sche Motoren Werke Aktiengesellschaft, BMW AG. This Owner's Manual describes all models, all series equipment, as well as country-specific and special equipment offered in the model series. Therefore, this Owner's Manual also de scribes and depicts equipment that may not be contained in your vehicle because of the se lected special equipment or country version, for example. This also applies to safety-related functions and systems. For options and equipment not described in this Owner's Manual, please refer to the Sup plementary Owner's Manuals. On right-hand drive vehicles, some controls are arranged differently than shown in the illustra tions.

Status of this Owner's Manual at time of print ing The manufacturer of your vehicle pursues a policy of constant development that is con ceived to ensure that our vehicles continue to embody the highest quality and safety stan dards. In rare cases, therefore, the features de scribed in this Owner's Manual may differ from those in your vehicle.

Seite 6

Notes

6 Online Edition for Part no. 01 40 2 911 521 - VI/13

For your own safety Warranty Your vehicle is technically configured for the operating conditions and registration require ments applying in the country of first delivery homologation. If your vehicle is to be oper ated in a different country it might be neces sary to adapt your vehicle to potentially differ ing operating conditions and permit requirements. If your vehicle does not comply with the homologation requirements in a cer tain country you cannot lodge warranty claims for your vehicle there. Further information can be obtained from your Service Centre.

Maintenance and repairs Advanced technology, e.g., the use of modern materials and high-performance electronics, requires suitable maintenance and repair methods. Therefore, have this work performed only by a MINI service center or a workshop that works according to MINI repair procedures with ap propriately trained personnel.

If this work is not carried out properly, there is the danger of subsequent damage and related safety hazards.

Parts and accessories For your own safety, use genuine parts and ac cessories approved by the manufacturer of the MINI. When you purchase accessories tested and approved by the manufacturer of the MINI and Original MINI Parts, you simultaneously ac quire the assurance that they have been thor oughly tested by the manufacturer of the MINI to ensure optimum performance when instal led on your vehicle. The manufacturer of the MINI warrants these parts to be free from de fects in material and workmanship. The manu facturer of the MINI will not accept any liability for damage resulting from installation of parts and accessories not approved by the manufac

turer of the MINI. The manufacturer of the MINI cannot test every product made by other man ufacturers to verify if it can be used on a MINI safely and without risk to either the vehicle, its operation, or its occupants. Original MINI Parts, MINI Accessories and other products approved by the manufacturer of the MINI, together with professional advice on using these items, are available from all MINI Dealers. Installation and operation of non-MINI approved accessories such as alarms, radios, amplifiers, radar detec tors, wheels, suspension components, brake dust shields, telephones, including operation of any mobile phone from within the vehicle with out using an externally mounted antenna, or transceiver equipment, for instance, CBs, walkie-talkies, ham radios or similar accesso ries, may cause extensive damage to the vehi cle, compromise its safety, interfere with the vehicle's electrical system or affect the validity of the MINI Limited Warranty. See your MINI Dealer for additional information. Maintenance, replacement, or repair of the emission control devices and systems may be performed by any automotive repair establishment or individual using any certified automotive part.

California Proposition 65 Warning California laws require us to state the following warning: Engine exhaust and a wide variety of automo bile components and parts, including compo nents found in the interior furnishings in a vehi cle, contain or emit chemicals known to the State of California to cause cancer and birth de fects and reproductive harm. In addition, cer tain fluids contained in vehicles and certain products of component wear contain or emit chemicals known to the State of California to cause cancer and birth defects or other repro ductive harm. Battery posts, terminals and re lated accessories contain lead and lead com pounds. Wash your hands after handling. Used engine oil contains chemicals that have caused cancer in laboratory animals. Always protect

Seite 7

Notes

7Online Edition for Part no. 01 40 2 911 521 - VI/13

your skin by washing thoroughly with soap and water.

Service and warranty We recommend that you read this publication thoroughly. Your vehicle is covered by the fol lowing warranties: New Vehicle Limited Warranty. Rust Perforation Limited Warranty. Federal Emissions System Defect Warranty. Federal Emissions Performance Warranty. California Emission Control System Limited

Warranty. Detailed information about these warranties is listed in the Service and Warranty Information Booklet for US models or in the Warranty and Service Guide Booklet for Canadian models. Your vehicle has been specifically adapted and designed to meet the particular operating con ditions and homologation requirements in your country and continental region in order to de liver the full driving pleasure while the vehicle is operated under those conditions. If you wish to operate your vehicle in another country or re gion, you may be required to adapt your vehi cle to meet different prevailing operating con ditions and homologation requirements. You should also be aware of any applicable war ranty limitations or exclusions for such country or region. In such case, please contact Cus tomer Relations for further information.

Maintenance Maintain the vehicle regularly to sustain the road safety, operational reliability and the New Vehicle Limited Warranty. Specifications for required maintenance meas ures: MINI Maintenance system Service and Warranty Information Booklet

for US models Warranty and Service Guide Booklet for

Canadian models

If the vehicle is not maintained according to these specifications, this could result in serious damage to the vehicle. Such damage is not covered by the MINI New Vehicle Limited War ranty.

Data memory Numerous electronic components in your vehi cle contain data memories that store technical information on the vehicle condition, events and faults, either temporarily or permanently. This technical information generally documents the state of a component, a module, a system or the environment. Operating conditions of system compo

nents, such as filling levels. Status messages from the vehicle and its in

dividual components, such as wheel rpm/ speed, motion delay, transverse accelera tion.

Malfunctions and defects in important sys tem components, such as lights and brakes.

Vehicle responses to special driving situa tions, such as airbag deployment, use of the stability control systems.

Ambient conditions, such as the tempera ture.

These data are of a technical nature only and are used to detect and eliminate faults and to optimize vehicle functions. Travel profiles of routes driven with the vehicle cannot be cre ated from these data. If services are used, for instance in the event of repairs, service proc esses, warranty cases, quality assurance, etc., this technical information can be read out from the event and fault data memories by service personnel, including the manufacturer, using special diagnosis tools. This service personnel can provide you with more information if needed. After troubleshooting, the information in the fault memory is cleared or overwritten continuously.

Seite 8

Notes

8 Online Edition for Part no. 01 40 2 911 521 - VI/13

Situations are conceivable during the use of the vehicle in which these technical data could be come associated with a specific person in com bination with other information, such as an ac cident report, damage to the vehicle, witness accounts, etc., possibly with the involvement of an authorized expert. Additional functions that are contractually agreed with the customer, such as vehicle lo calization in the event of an emergency, permit the transfer of certain vehicle data out of the vehicle.

Event Data Recorder EDR This vehicle is equipped with an event data re corder EDR. The main purpose of an EDR is to record, in certain crash or near crash-like situa tions, such as an air bag deployment or hitting a road obstacle, data that will assist in under standing how a vehicle's systems performed. The EDR is designed to record data related to vehicle dynamics and safety systems for a short period of time, typically 30 seconds or less. The EDR in this vehicle is designed to record such data as: How various systems in your vehicle were

operating. Whether or not the driver and passenger

safety belts were fastened. How far, if at all, the driver was depressing

the accelerator and/or brake pedal. How fast the vehicle was traveling. These data can help provide a better under standing of the circumstances in which crashes and injuries occur. EDR data are recorded by your vehicle only if a nontrivial crash situation occurs; no data are re corded by the EDR under normal driving condi tions and no personal data, e.g., name, gender, age, and crash location, are recorded. However, other parties, such as law enforce ment, could combine the EDR data with the

type of personally identifying data routinely ac quired during a crash investigation. To read data recorded by an EDR, special equipment is required, and access to the vehi cle or the EDR is needed. In addition to the ve hicle manufacturer, other parties, such as law enforcement, that have the special equipment, can read the information if they have access to the vehicle or the EDR.

Reporting safety defects For US customers The following only applies to vehicles owned and operated in the US. If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration NHTSA, in addition to notifying BMW of North America, LLC, P.O. Box 1227, Westwood, New Jersey 07675-1227, Telephone 1-800-831-1117. If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However, NHTSA cannot become involved in individual problems between you, your dealer, or BMW of North America, LLC. To contact NHTSA, you may call the Vehicle Safety Hotline toll-free at 1-888-327-4236 (TTY: 1-800-424-9153); go to http://www.safe rcar.gov; or write to: Administrator, NHTSA, 400 Seventh Street, SW., Washington, DC 20590. You can also obtain other information about motor vehicle safety from http://www.safe rcar.gov

For Canadian customers Canadian customers who wish to report a safety- related defect to Transport Canada, De fect Investigations and Recalls, may telephone

Seite 9

Notes

9Online Edition for Part no. 01 40 2 911 521 - VI/13

the toll-free hotline 1-800-333-0510. You can also obtain other information about motor ve hicle safety from http://www.tc.gc.ca/roadsaf ety.

Seite 10

Notes

10 Online Edition for Part no. 01 40 2 911 521 - VI/13

Seite 11

Notes

11Online Edition for Part no. 01 40 2 911 521 - VI/13

WATCH ME.

Online Edition for Part no. 01 40 2 911 521 - VI/13

At a glance

Controls

Driving tips

Entertainment

Communication

Mobility

Reference

Online Edition for Part no. 01 40 2 911 521 - VI/13

Cockpit Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also

describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys tems.

All around the steering wheel

1 Setting the exterior mirror, folding it in and out42

Power windows, front34

MINI Countryman: power win dows, rear34

MINI Countryman: safety switch for rear power windows35

2 Parking lamps67

Low beams67

Automatic headlamp con trol67 Adaptive Light Control69 Turn signal52

High beams52 Headlamp flasher52

Seite 14

At a glance Cockpit

14 Online Edition for Part no. 01 40 2 911 521 - VI/13

Roadside parking lamps68

Computer60

3 Tachometer60 Instrument lighting70

Resetting the trip odometer59

4 Washer/wiper system53

5 Start/stop the engine and switch the ignition on/off49

6 Ignition lock49 7 Steering wheel buttons, right

Resuming cruise control85

Storing the speed and accelerat ing or slowing down85

Activating/deactivating cruise control84

Steering wheel buttons, left Volume

Telephone136

Change the radio station Select a music track Scroll through the redial list

8 Horn, the entire surface 9 Adjust the steering wheel43 10 Releasing the hood165

Seite 15

Cockpit At a glance

15Online Edition for Part no. 01 40 2 911 521 - VI/13

Displays

1 Tachometer60 with indicator and warning lamps17

2 Display for Current speed59 Indicator/warning lamps17

3 Resetting the trip odometer59 4 Display for

Automatic transmission position56 Computer60 Service requirements64 Odometer and trip odometer59

Flat Tire Monitor75 Tire Pressure Monitor75 Settings and information61 Personal Profile settings22

5 Instrument lighting70 6 Speedometer with indicator and warning

lamps17 7 Fuel gauge60 8 Radio display 9 RadioRadio MINI Boost CD122

Seite 16

At a glance Cockpit

16 Online Edition for Part no. 01 40 2 911 521 - VI/13

Indicator/warning lamps The concept

The indicator and warning lamps can light up in a variety of combinations and colors in display area 1 or 2.

Several of the lamps are checked for proper functioning when the engine is started or the ignition is switched on, and light up briefly.

What to do in case of a malfunction A list of all indicator and warning lamps, as well as notes on possible causes of malfunctions and on how to respond, refer to page 190.

All around the center console

1 Hazard warning system 2 Speedometer with

Radio MINI Boost CD122 3 CD drive

4 Air conditioning, automatic climate con trol87

5 Buttons on the center console

Seite 17

Cockpit At a glance

17Online Edition for Part no. 01 40 2 911 521 - VI/13

Seat heating38

Central locking, inside27

Front fog lamps70

Sport button83

Driving stability control systems DSC Dynamic Stability Con trol81 DTC Dynamic Traction Con trol82

6 Storage compartment

All around the head liner

1 Indicator/warning lamps for the front pas senger airbags74

2 Reading lamps71

Ambient lighting color71

Glass sunroof, electrical32

Interior lamps70

All around the shift/ selector lever

1 AUX-IN port130 USB audio interface131

Seite 18

At a glance Cockpit

18 Online Edition for Part no. 01 40 2 911 521 - VI/13

Seite 19

Cockpit At a glance

19Online Edition for Part no. 01 40 2 911 521 - VI/13

HANDLE ME.

Online Edition for Part no. 01 40 2 911 521 - VI/13

At a glance

Controls

Driving tips

Entertainment

Communication

Mobility

Reference

Online Edition for Part no. 01 40 2 911 521 - VI/13

Opening and closing Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys tems.

Remote control/key Buttons on the remote control

1 Opening tailgate 2 Unlocking 3 Locking

General information Each remote control contains a rechargeable battery that is automatically recharged when it is in the ignition lock while the car is being driven. Use each remote control at least twice a year for longer road trips in order to maintain the batteries' charge status. In vehicles equip ped with Comfort Access, the remote control contains a replaceable battery, refer to page 32. The settings called up and implemented when the vehicle is unlocked depend on which re

mote control is used to unlock the vehicle, Per sonal Profile, refer to page 22. In addition, information about service require ments is stored in the remote control, Service data in the remote control, refer to page 169.

Integrated key

Press button 1 to unlock the key.

The integrated key fits the following locks: Driver's door, refer to page 26.

New remote controls You can obtain new remote controls from your service center.

Loss of the remote controls Lost remote controls can be blocked by your service center.

Personal Profile The concept You can set several of your vehicle's functions to suit your personal needs and preferences. Through Personal Profile, most of these set

tings are stored for the remote control cur rently in use.

While the vehicle is being unlocked, the re mote control is recognized and the settings

Seite 22

Controls Opening and closing

22 Online Edition for Part no. 01 40 2 911 521 - VI/13

stored with it are called up and imple mented.

Your personal settings will be recognized and called up again even if the vehicle has been used in the meantime by someone else with another remote control.

The individual settings are stored for no more than three remote controls.

Personal Profile settings The following functions and settings can be stored in a profile. More information on the settings can be found under: Response of the central locking system

when the car is being unlocked, refer to page 24.

Automatic locking of the vehicle, refer to page 28.

Triple turn signal activation, refer to page 52.

Settings for the displays in the speedometer and tachometer: 12h/24h clock format, refer to

page 62. Date format, refer to page 62. Units of measure for fuel consumption,

distance covered/remaining distances, and temperature, refer to page 62.

Light settings: Headlamp courtesy delay feature, refer

to page 69. Daytime running lights, refer to

page 68. Automatic climate control, refer to

page 89: AUTO program, activating/deac tivating the cooling function, setting the temperature, air volume, and air distribu tion.

Entertainment: Last entertainment source.

Radio MINI Boost CD: Tone settings, refer to page 124. Volume, refer to page 124.

Central locking system The concept The central locking system becomes active when the driver's door is closed. The system simultaneously engages and re leases the locks on the following: Doors. Tailgate. Fuel filler flap.

Operating from the outside Via the remote control. Via the door lock. In cars with Comfort Access, via the door

handles on the driver's and front passenger sides.

The following takes place simultaneously when locking/unlocking the vehicle via the remote control: Depending on the vehicle equipment, the

anti-theft protection is switched on and off as well. The anti-theft protection makes it impossible to unlock the doors using the lock buttons or door handles.

The welcome lamps, interior lamps, and ambient lighting are switched on and off.

The alarm system is armed or disarmed, re fer to page 32.

Operating from the inside Via the switch/button for the central locking system, refer to page 27. In an accident of the necessary severity, the central locking system unlocks automatically.

Seite 23

Opening and closing Controls

23Online Edition for Part no. 01 40 2 911 521 - VI/13

The hazard warning system and interior lamps come on.

Opening and closing: from the outside Using the remote control

General information Take the remote control with you People or animals left unattended in a

parked vehicle can lock the doors from the in side. Always take the remote control with you when leaving the vehicle so that the vehicle can then be opened from the outside.

Unlocking

Press the button. The vehicle is un locked. The welcome lamps and interior lamps are switched on. You can set how the vehicle is to be unlocked. The setting is stored for the remote control cur rently in use.

1. Switch on the ignition, refer to page 49. 2. Press the button on the turn indicator lever

repeatedly until "SET/INFO" is displayed.

3. Press and hold the button until the display changes.

4. Press the button repeatedly until the sym bol and "SET" are displayed.

5. Press and hold the button until the display changes.

6. Press the button repeatedly until the sym bol shown is displayed, arrow.

7. Press and hold the button until the display changes.

8. Press the button to select:

Pressing the button once un locks only the driver's door and the fuel filler flap. Pressing twice unlocks the entire vehicle.

Pressing the button once un locks the entire vehicle.

9. Press and hold the button until the display changes. The setting is stored for the re mote control currently in use.

Seite 24

Controls Opening and closing

24 Online Edition for Part no. 01 40 2 911 521 - VI/13

Convenient opening

Press and hold the button on the re mote control. The power windows are opened and the glass sunroof is raised. Convenient closing with the remote control is not possible.

Locking

Press the button. Locking from the outside Do not lock the vehicle from the outside if

there are people in it, as the vehicle cannot be unlocked from inside without special knowl edge.

Setting the confirmation signals Have unlocking or locking of the vehicle con firmed.

1. Switch on the ignition, refer to page 49. 2. Press the button on the turn indicator lever

repeatedly until "SET/INFO" is displayed.

3. Press and hold the button until the display changes.

4. Press the button repeatedly until the sym bol and "SET" are displayed.

5. Press and hold the button until the display changes.

6. Press the button to select, arrow: Confirmation signal during unlock

ing Confirmation signal during locking

7. Press and hold the button until the display changes.

8. Press the button to select:

The hazard warning system flashes dur ing unlocking/locking.

An acoustic signal sounds during un locking/locking.

The hazard warning system lights up and an acoustic signal sounds during unlocking/locking.

Seite 25

Opening and closing Controls

25Online Edition for Part no. 01 40 2 911 521 - VI/13

The function is deactivated. 9. Press and hold the button until the display

changes. The setting is stored.

Switching on the interior lamps When the vehicle is locked:

Press the button. You can also use this function to locate your ve hicle in parking garages, etc.

Unlocking the tailgate

Press the button for approx. 1 second and then release it. The tailgate pivots back and up when it opens. Ensure that adequate clearance is available be fore opening.

Malfunctions The function of the remote control may be im paired by local radio waves. If this occurs, un lock and lock the vehicle at the door lock with the integrated key. If it should become impossible to lock the vehi cle with a remote control, the battery in the re mote control is discharged. Use this remote control on an extended trip to recharge the battery, refer to page 22.

For US owners only The transmitter and receiver units comply with part 15 of the FCC/Federal Communication Commission regulations. Operation is governed by the following: FCC ID: LX8766S LX8766E LX8CAS Compliance statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interfer ence, and

this device must accept any interference re ceived, including interference that may cause undesired operation.

Any unauthorized modifications or changes to these devices could void the user's authority to operate this equipment.

Using the door lock

Sets how the vehicle is to be unlocked, refer to page 24.

In some vehicle equipment versions, only the driver's door can be unlocked and locked via the door lock.

Locking from the outside Do not lock the vehicle from the outside if

there are people in it, as the vehicle cannot be unlocked from inside without special knowl edge.

Locking the doors and tailgate at once To lock all doors, the fuel filler flap, and the tail gate at once:

1. With the doors closed, lock the vehicle us ing the button for the central locking sys tem in the interior, refer to page 27.

2. Unlock and open the driver's or front pas senger door, refer to page 27.

3. To lock the vehicle: Lock the driver's door using the

integrated key in the door lock, or

Seite 26

Controls Opening and closing

26 Online Edition for Part no. 01 40 2 911 521 - VI/13

Press down the lock button of the front passenger door and close the door from the outside.

Convenient opening and closing In vehicles with an alarm system or Comfort Ac cess, the windows and the glass sunroof can be operated via the door lock.

Opening/closing Turn the key to the unlock or lock position and hold it there.

Keep the closing area clear Watch during the opening and closing

process to be sure that no one becomes trap ped. Releasing the key stops the motion.

Manual operation If an electrical malfunction occurs, the driver's door can be unlocked or locked by turning the integrated key to the end positions of the door lock.

Opening and closing: from the inside Operation via Switch in the center console:

Button in the driver's or front passenger door:

The graphic shows the button in the MINI Pace man as an example. The switch or the buttons can be used to lock or unlock the doors and tailgate when the doors are closed, but they are not theft-pro tected. The fuel filler flap remains unlocked.

Unlocking and opening doors Using the switch or the buttons for the cen

tral locking system, unlock all of the doors at once and then pull the door opener above the armrest, or

Pull the door handle on each door twice: the door is unlocked the first time and opened the second time.

Locking Press the switch/button or Push down the lock button of a door. To

avoid locking yourself out by accident, the driver's door cannot be locked at the lock button while the door is open.

Seite 27

Opening and closing Controls

27Online Edition for Part no. 01 40 2 911 521 - VI/13

Automatic locking In addition, it is possible to set the situations in which the vehicle locks. The setting is stored for the remote control in use.

1. Switch on the ignition, refer to page 49. 2. Press the button on the turn indicator lever

repeatedly until "SET/INFO" is displayed.

3. Press and hold the button until the display changes.

4. Press the button repeatedly until the sym bol and "SET" are displayed.

5. Press and hold the button until the display changes.

6. Press the button repeatedly until the sym bol shown is displayed, arrow.

7. Press and hold the button until the display changes.

8. Press the button to select:

The central locking system locks auto matically after some time if no door is opened.

The vehicle locks automatically after you drive away.

The vehicle locks automatically after a short period of time if a door is not opened or after you drive away.

The central locking system remains un locked.

9. Press and hold the button until the display changes. The setting is stored.

Tailgate Opening The tailgate pivots back and up when it opens. Ensure that adequate clearance is available be fore opening.

Provide edge protection Sharp or angular objects can hit the rear

window while driving and damage the heating wires of the rear window. Provide edge protec tion.

Only drive with the tailgate fully closed; other wise, the tail lamps will be hidden from view and driving safety will be compromised. In some market-specific versions, the tailgate can only be unlocked using the remote control if the vehicle was unlocked first.

Seite 28

Controls Opening and closing

28 Online Edition for Part no. 01 40 2 911 521 - VI/13

Opening from the inside

Press the button on the driver's footwell.

MINI Countryman

Press the top half of the MINI emblem, arrow, or

Press the button on the remote control for approx. 1 second and release. The tailgate is unlocked.

MINI Paceman

Press the top half of the MINI emblem, arrow, or

Press the button on the remote control for approx. 1 second and release. The tailgate is unlocked.

Closing Keep the closing area clear Make sure that the closing area of the

tailgate is clear; otherwise, injuries or damage may result.

Take the remote control with you Always take the remote control with you

when leaving the vehicle and do not place it in the cargo area; otherwise, the remote control may be locked into the vehicle when the tail gate is closed.

MINI Countryman

Recessed grips on the inside trim of the tailgate can be used to conveniently pull down the tail gate.

Seite 29

Opening and closing Controls

29Online Edition for Part no. 01 40 2 911 521 - VI/13

MINI Paceman

Recessed grips on the inside trim of the tailgate can be used to conveniently pull down the tail gate.

Comfort Access The concept The vehicle can be accessed without activating the remote control. All you need to do is to have the remote control with you, e.g., in your jacket pocket. The vehicle automatically de tects the remote control when it is nearby or in the passenger compartment. Comfort Access supports the following func tions: Unlocking/locking of the vehicle. Unlocking of the tailgate separately. Starting the engine.

Functional requirements There are no external sources of interfer

ence in the vicinity. To lock the vehicle, the remote control

must be located outside of the vehicle. The next unlocking and locking cycle is not

possible until after approx. 2 seconds. The engine can only be started if the re

mote control is inside the vehicle. The doors and tailgate must be closed to

operate the windows.

Comparison with ordinary remote control The functions can be controlled by pressing the buttons or via Comfort Access. Notes on opening and closing, refer to page 22. If you notice a brief delay while opening or closing the windows or glass sunroof, the sys tem is checking whether a remote control is in side the vehicle. Repeat the opening or closing procedure, if necessary.

Unlocking

Press button 1.

Depending on the setting, either only the driv er's door or the entire vehicle is unlocked, refer to page 24. Pressing the button again locks the entire vehi cle again. Convenient opening with the remote control, refer to page 25.

Locking Press button 1. For Convenient closing, press and hold but ton 1. The windows and glass sunroof are closed in addition.

Unlocking the tailgate separately Press the top half of the MINI emblem. This corresponds to pressing the following but

ton on the remote control: .

Seite 30

Controls Opening and closing

30 Online Edition for Part no. 01 40 2 911 521 - VI/13

If a remote control accidentally left in the cargo area is detected in the locked vehicle after the tailgate is closed, the tailgate opens again slightly. The hazard warning system flashes and an acoustic signal sounds.

Power windows and electrical glass sunroof When the engine is switched off, the windows and the sunroof can be operated as long as neither the doors nor the tailgate are opened. When the door and tailgate are closed again and the remote control is detected inside the vehicle, the windows and the sunroof can be operated again. Insert the remote control into the ignition lock to be able to operate the windows and the sun roof while the engine is switched off and the doors are open.

Switching on the radio ready state Press the Start/Stop button to switch on the radio ready state, refer to page 49. Do not depress the brake or the clutch; other wise, the engine will start.

Starting the engine The engine can be started or the ignition can be switched on, refer to page 49, when a re mote control is inside the vehicle. It is not nec essary to insert a remote control into the igni tion lock.

Switching off the engine in cars with automatic transmission The engine can only be switched off with the selector lever in position P, refer to page 56. To switch off the engine with the selector lever in position N, the remote control must be in serted in the ignition lock.

Before driving a vehicle with automatic transmission into a car wash 1. Insert the remote control into the ignition

switch. 2. Depress the brake pedal. 3. Move the selector lever to position N. 4. Switch the engine off. The vehicle can roll.

Malfunction The Comfort Access functions can be disturbed by local radio waves, such as by a mobile phone in the immediate vicinity of the remote control or when a mobile phone is being charged in the vehicle. If this occurs, open or close the vehicle using the buttons on the remote control or use the integrated key in the door lock. To start the engine afterward, insert the remote control into the ignition switch.

Warning lamps The warning lamp in the instrument cluster lights up when you attempt to start the engine: the engine cannot be

started. The remote control is not in the vehicle or has a malfunction. Take the remote control with you inside the vehicle or have it checked. If neces sary, insert another remote control into the ig nition switch.

The warning lamp in the instrument cluster lights up while the engine is run ning: the remote control is no longer in

side the vehicle. After switching off the engine, the engine can only be started again within approx. 10 sec onds if no door has been opened.

The indicator lamp lights up: replace the remote control battery.

Seite 31

Opening and closing Controls

31Online Edition for Part no. 01 40 2 911 521 - VI/13

Replacing the battery The remote control for Comfort Access contains a battery that will need to be replaced from time to time.

1. Remove the cover.

2. Insert a new battery with the positive side facing upwards.

3. Press the cover closed. Return used battery to a recycling center or to your service center.

Alarm system The concept The enabled alarm system reacts to the follow ing: Opening of a door, the hood or the tailgate. Movements inside the vehicle. Changes in the vehicle tilt, e.g., during at

tempts to steal a wheel or tow the car. Interruptions in battery voltage. Depending on the market-specific version, the alarm system briefly signals unauthorized entry attempts by: By sounding an acoustic alarm. By switching on the hazard warning system.

Tilt alarm sensor The tilt of the vehicle is monitored.

The alarm system responds in situations such as attempts to steal a wheel or tow the car.

Interior motion sensor For the interior motion sensor to function prop erly, the windows and the glass sunroof must be closed.

Avoiding unintentional alarms The tilt alarm sensor and interior motion sensor can be switched off together, such as in the fol lowing situations: In duplex garages. During transport on car-carrying trains, at

sea or on a trailer. When animals are to remain in the vehicle.

Switching off the tilt alarm sensor and interior motion sensor

Press the button on the remote control twice in succession.

Lock the vehicle twice with the integrated key.

The LEDs flash in short succession for approx. 2 seconds. The tilt alarm sensor and interior motion sensor remain switched off until the ve hicle is unlocked and locked again.

Glass sunroof, electrical General information

Danger of pinching Monitor the closing process and make

sure that the closing path of the glass sunroof is clear; otherwise, injuries may result.

Take the remote control with you Take the remote control with you when

leaving the vehicle so that children, for exam ple, cannot operate the roof and injure them selves.

Seite 32

Controls Opening and closing

32 Online Edition for Part no. 01 40 2 911 521 - VI/13

Convenient operation via: Door lock, refer to page 26 Comfort Access, refer to page 30

Tilting the glass sunroof MINI Countryman: Press the switch back to the resistance

point and hold. Both glass sunroofs are raised. Releasing stops the motion.

With the ignition switched on, press the switch back past the resistance point. Both closed glass sunroofs are raised fully. Pressing again stops the motion.

MINI Paceman: Press the switch back to the resistance

point and hold. The front glass sunroof is raised. Releasing stops the motion.

With the ignition switched on, press the switch back past the resistance point. The front glass sunroof is fully raised. Pressing again stops the motion.

Opening, closing MINI Countryman: In the raised position with the ignition

switched on, press the switch back and hold. The front glass sunroof is opened. The rear glass sunroof is closed.

Releasing stops the motion. The same method is used to close the glass sunroof, in this case by pressing the switch for ward. The front glass sunroof remains in the raised position. The rear glass sunroof is raised. Press ing again closes both sunroofs completely. MINI Paceman: In the raised position with the ignition

switched on, press the switch back and hold. The front glass sunroof is opened. Releasing stops the motion.

The same method is used to close the glass sunroof, in this case by pressing the switch for ward. The front glass sunroof remains in the raised position. Pressing again closes the roof com pletely.

Roller sunblind The roller sunblind can be opened and closed separately from the glass sunroof.

After a power failure After a power failure, it could happen that the sunroof can only be raised. In this case, have the system initialized. The manufacturer of your MINI recommends having this work performed by the service center.

Power windows General information

Danger of pinching Monitor the closing process and make

sure that the closing path of the window is clear; otherwise, injuries may result.

Seite 33

Opening and closing Controls

33Online Edition for Part no. 01 40 2 911 521 - VI/13

Take the remote control with you Take the remote control with you when

leaving the vehicle so that children, for exam ple, cannot operate the power windows and in jure themselves.

If, after having been opened and closed a num ber of times in close succession, a window can only be closed, the system is overheated. Let the system cool down for several minutes with the ignition switched on or the engine running.

Opening, closing

Front windows

To open: Press the switch to the resistance point. The

window opens while the switch is held. Press the switch beyond the resistance

point. The window opens automatically in the radio ready state and higher. Press again briefly to stop the opening pro cedure.

To close: Pull the switch to the resistance point. The

window closes while the switch is held. Pull the switch beyond the resistance point.

The window closes automatically. Pressing the switch stops the motion.

MINI Countryman: rear windows

To open: Press the switch to the resistance point. The

window opens while the switch is held. Press the switch beyond the resistance

point. The window opens automatically in the radio ready state and higher.

To close: Pull the switch to the resistance point. The

window closes while the switch is held. Pull the switch beyond the resistance point.

The window closes automatically. Pressing the switch stops the motion.

After the ignition is switched off The windows can be operated for approx. 1 mi nute after the remote control is removed or the ignition is switched off.

Take the remote control with you Take the remote control with you when

leaving the vehicle so that children, for exam ple, cannot operate the power windows and in jure themselves.

Pinch protection system If the closing force exceeds a specific value as a window closes, the closing action is inter rupted. The window reopens slightly.

Seite 34

Controls Opening and closing

34 Online Edition for Part no. 01 40 2 911 521 - VI/13

Danger of pinching even with pinch pro tection

Even with the pinch protection system, check that the window's closing path is clear; other wise, the closing action may not stop in certain situations, e.g., if thin objects are present.

Do not use window accessories Do not install any accessories in the range

of movement of the windows; otherwise, the pinch protection system will be impaired.

Closing without the pinch protection system

Danger of pinching Monitor the closing process and make

sure that the closing path of the window is clear; otherwise, injuries may result.

If there is an external danger or, for example, if ice on the windows prevents a window from closing normally, the window can be closed manually.

1. Pull the switch past the resistance point and hold it there. Pinch protection is limited and the window reopens slightly if the closing force exceeds a certain value.

2. Pull the switch past the resistance point again within approx. 4 seconds and hold it there. The window closes without pinch protec tion.

MINI Countryman: safety switch

With the safety switch, the rear windows are prevented from being opened or closed via the switches in the rear passenger area, such as by children. Press the button. The LED lights up if the safety function is switched on.

Safety switch for rear operation Press the safety switch when transporting

children in the rear; otherwise, injury may result if the windows are closed without supervi sion.

Seite 35

Opening and closing Controls

35Online Edition for Part no. 01 40 2 911 521 - VI/13

Adjusting Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys tems.

Sitting safely The ideal seating position can make a vital con tribution to relaxed, fatigue-free driving. The seating position plays an important role in an accident in combination with: Safety belts, refer to page 38 Head restraints, refer to page 41. Airbags, refer to page 72.

Seats Note before adjusting

Do not adjust the seat while driving Never attempt to adjust the driver's seat

while driving. The seat could respond with un expected movement and the ensuing loss of vehicle control could lead to an accident.

Do not incline the backrest too far to the rear

Do not incline the backrest on the front passen ger side too far to the rear during driving. Oth erwise, there is the danger of sliding under the safety belt in an accident. This would eliminate the protection normally provided by the belt.

Front seat adjustment

Forward/backward

Pull the lever, arrow 1, and slide the seat into the desired position, arrows 2. After releasing the lever, move the seat forward or back slightly to make sure it engages prop erly.

Height

Pull the lever up or push it down repeatedly, ar rows 1, until the desired height is reached, ar rows .

Backrest MINI Countryman

Seite 36

Controls Adjusting

36 Online Edition for Part no. 01 40 2 911 521 - VI/13

Pull the lever, arrow 1, and apply your weight to the backrest or lift it off, as necessary.

MINI Paceman

Pull the lever, arrow 1, and apply your weight to the backrest or lift it off, as necessary, ar rows 2.

Lumbar support You can also adjust the contour of the backrest to obtain additional support in the lumbar re gion. The upper hips and spinal column receive sup plementary support to help you maintain a re laxed, upright sitting position.

The graphic shows the MINI Countryman as an example. Turn the wheel to increase or decrease the cur vature.

MINI Countryman: rear seat adjustment Observe the following when adjusting Do not adjust the rear seats during a trip;

otherwise, there is a risk of passenger injury. Make sure that the locking mechanisms of the rear seats engage properly. Otherwise the re straining effect of the safety belts during an ac cident could be reduced.

Forward/backward

Pull the lever and slide the seat into the desired position. Release the lever and move the seat slightly forward or back so that it engages properly.

Backrest Adjust the backrest tilt, refer to page 98.

Seite 37

Adjusting Controls

37Online Edition for Part no. 01 40 2 911 521 - VI/13

MINI Paceman: entry in the rear

1. Pull the lever on the back of the seat up ward, arrow 1. The backrest folds forward.

2. Push against the backrest to move the seat forward, arrow 2.

To make it easier to enter the car in the rear, push back the safety belt on the lower belt guide rail if necessary.

Restoring the original seat position The driver's seat has a mechanical memory function for the forward/backward seat setting and the backrest setting.

1. Push the seat back to the original position. Do not fold back the backrest until the seat is in its original position; otherwise, the seat will engage in its current position. If this happens, adjust the forward/backward po sition manually, refer to page 36.

2. Fold back the backrest to lock the seat. Note the following when moving back the seat

When moving back the seat, ensure that per sons cannot be injured and objects cannot be damaged. Lock the front seats and front back rests before driving away; otherwise, there is the risk of an accident if the seat or backrest moves unexpectedly.

Seat heating

Switching on The temperature setting progresses one step through its control sequence each time you press the button. The maximum temperature is reached when three LEDs are lit. If the trip is continued within approx. 15 mi nutes, the seat heating is activated automati cally with the temperature set last. The temperature is reduced, if need be, down to no heat in order to reduce the load on the battery. The LEDs remain lit.

Switching off Press the button longer.

Safety belts Number of safety belts Your vehicle has been fitted with four or five safety belts for the safety of you and your pas sengers. However, they can only offer protection when adjusted correctly.

Notes Always make sure that safety belts are being worn by all occupants before driving away. Although airbags enhance safety by providing added protection, they are not a substitute for safety belts.

Seite 38

Controls Adjusting

38 Online Edition for Part no. 01 40 2 911 521 - VI/13

The shoulder strap's anchorage point will be correct for adult seat occupants of every build if the seat is correctly adjusted.

One person per safety belt Never allow more than one person to

wear a single safety belt. Never allow infants or small children to ride on a passenger's lap.

Putting on the belt Lay the belt, without twisting, snugly

across the lap and shoulders, as close to the body as possible. Make sure that the belt lies low around the hips in the lap area and does not press on the abdomen. Otherwise, the belt can slip over the hips in the lap area in a frontal impact and injure the abdomen. The safety belt must not lie across the neck, rub on sharp edges, be routed over solid or breaka ble objects, or be pinched.

Reduction of restraining effect Avoid wearing clothing that prevents the

belt from fitting properly, and pull the shoulder belt periodically to readjust the tension across your lap; otherwise, the retention effect of the safety belt may be reduced.

Buckling the belt MINI Countryman:

MINI Paceman:

Make sure you hear the latch plate engage in the belt buckle. The shoulder strap's anchorage point will be correct for adult seat occupants of every build if the seat is correctly adjusted, refer to page 36.

Unbuckling the belt 1. Hold the belt firmly. 2. Press the red button in the belt buckle. 3. Guide the belt back into its reel.

Fastening the rear buckle tongues When the outer rear seats are not occupied, the buckle tongues of the rear seats can be slid up to the cargo area trim with the clip. This helps avoid annoying noises when driving.

MINI Countryman: center safety belt of rear seat The belt buckle embossed with the word CEN TER is intended exclusively for use by passen gers riding in the center position. If the center safety belt in the rear is used, the backrests must be locked, refer to page 99. The safety belt will not have a restraining effect if the backrest is not locked.

Belt holder in the headliner The holder for the safety belt is located in the headliner.

Seite 39

Adjusting Controls

39Online Edition for Part no. 01 40 2 911 521 - VI/13

1 Opening for the safety belt 2 Holder for the small buckle tongue

Take the small buckle tongue out of the holder. Move both buckle tongues downward.

Closing

Insert the small buckle tongue 2 of the safety belt into the small belt buckle 3.

Opening Press the red button on the small belt buckle 3 with buckle tongue 1. When the center safety belt is locked: Press the red button 3 with the buckle tongue of the outer left safety belt.

Putting on the belt

1 Large buckle tongue 2 Small buckle tongue 3 Small belt buckle 4 Large belt buckle

Buckle tongue 1 must be inserted in belt buckle 4. Make sure you hear the buckle tongue engage in the belt buckle. Insert the buckle tongue into the belt buckle in such a way that the belt lies smoothly against the body of the buckled person and is not twisted.

Stowing the center safety belt If the center seat is not occupied, insert the belt buckles 3 and 4 into the respective holders, ar rows.

Move the buckle tongues to the belt holder on the headliner, refer to page 39, and insert them into the provided holders.

Seite 40

Controls Adjusting

40 Online Edition for Part no. 01 40 2 911 521 - VI/13

Safety belt reminder for driver's seat and front passenger seat

The indicator lamps light up and a sig nal sounds. Check whether the safety belt has been fastened correctly.

Damage to safety belts In the case of strain caused by accidents or damage: Have the safety belts, including the safety belt tensioners, replaced and have the belt anchors checked.

Checking and replacing safety belts Have the work performed only by your

service center; otherwise, it cannot be ensured that this safety feature will function properly.

Head restraints Correctly set head restraint A correctly adjusted head restraint reduces the risk of spinal injury in the event of an accident.

Adjusting the head restraint Correctly adjust the head restraints of all

occupied seats; otherwise, there is an increased risk of injury in an accident.

Height Adjust the head restraint so that its center is approx. at ear level.

Height adjustment

To raise: pull. To lower: press the button, arrow 1, and push the head restraint down.

Removing Only remove the head restraint if no one will be sitting in the seat in question.

Before transporting passengers Reinstall the head restraint before trans

porting anyone in the seat; otherwise, the pro tective function of the head restraint is unavail able.

Front 1. Pull upward as far as possible. 2. Fold the backrest back slightly. 3. Press button 1 and pull out the head re

straint all the way to the stop. 4. MINI Countryman: press the additional but

ton 2 using a suitable tool. 5. Pull out the head restraint. 6. Fold back the backrest.

Seite 41

Adjusting Controls

41Online Edition for Part no. 01 40 2 911 521 - VI/13

Rear 1. Pull upward as far as possible. 2. Fold the backrest forward slightly. 3. Press button 1 and pull out the head re

straint all the way to the stop. 4. Press the additional button 2 using a suita

ble tool. 5. Pull out the head restraint completely. 6. Fold back the rear seat backrest.

Mirrors Exterior mirrors

General information The mirror on the passenger side is more curved than the driver's mirror.

Estimating distances correctly Objects reflected in the mirror are closer

than they appear. Do not estimate the distance to the traffic behind you based on what you see in the mirror, as this will increase your risk of an accident.

At a glance

1 Adjusting 2 Selecting the left/right mirror 3 Folding the mirror in and out

Selecting a mirror To change to the other mirror: slide the mirror switch over.

Adjusting electrically The setting corresponds to the direction in which the button is pressed.

Adjusting manually If an electrical malfunction occurs, for example, press the edges of the mirror glass.

Folding the mirror in and out Press button 3. The mirror can be folded in up to a vehicle speed of approx. 20 mph/30 km/h. For example, this is advantageous In car washes. In narrow streets. For folding back mirrors that were folded

away manually. Fold in the mirror in a car wash Before entering an automatic car wash,

fold in the exterior mirrors by hand or with the button; otherwise, they could be damaged, de pending on the width of the vehicle.

Automatic heating Both exterior mirrors are heated automatically while the engine is running or the ignition is switched on when the external temperature is below a certain value.

Seite 42

Controls Adjusting

42 Online Edition for Part no. 01 40 2 911 521 - VI/13

Interior rearview mirror

To reduce the blinding effect from the rear when driving at night: turn the knob.

Interior rearview and exterior mirrors, automatic dimming feature

Two photocells are used for control: In the mirror frame, see arrow. On the back of the mirror.

For proper operation: Keep the photocells clean. Do not cover the area between the inside

rearview mirror and the windshield. Do not apply stickers to the windshield in

front of the mirror.

Steering wheel Adjusting

Do not adjust while driving Do not adjust the steering wheel while

driving; otherwise, an unexpected movement could result in an accident.

1. Fold the lever down.

2. Move the steering wheel to the preferred height and angle to suit your seating posi tion.

3. Fold the lever back. Do not use force to swing the lever back. Do not use force to swing the lever back

up; otherwise, the mechanism will be dam aged.

Seite 43

Adjusting Controls

43Online Edition for Part no. 01 40 2 911 521 - VI/13

Transporting children safely Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys tems.

The right place for chil dren Notes

Children in the vehicle Do not leave children unattended in the

vehicle; otherwise, they could endanger them selves and other persons, e.g., by opening the doors.

Children should always be in the rear Accident research shows that the safest place for children is on the rear seat.

Transporting children in the rear Transport children younger than 13 years

of age or shorter than 5 ft/150 cm in the rear only, using child restraint fixing systems suita ble for the age, weight, and height of the child; otherwise, there is an increased risk of injury in an accident. Children 13 years of age or older must wear a safety belt as soon as a suitable child restraint fixing system can no longer be used, due to their age, weight and size.

Installing child seats Only install child seats in the rear when

the rear seat backrest is folded all the way back and engaged; otherwise, there is an increased risk of injury in an accident.

Children on the front passenger seat

Front passenger airbags Should it be necessary to use a child restraint fixing system on the front passenger seat, make sure that the front and side airbags on the front passenger side are deactivated, refer to page 73.

Deactivating the front passenger airbags If a child restraint fixing system is used in

the front passenger seat, the front passenger airbags must be deactivated; otherwise, there is an increased risk of injury to the child when the airbags are triggered, even with a child re straint fixing system.

Installing child re straint fixing systems Before mounting MINI Countryman: before mounting a child re straint fixing system on the rear seats, move the seats into the rearmost positions. Adjust the inclination of the center backrest to that of the respective outer backrest. After mounting the child restraint fixing system on the respective outer rear seat, adjust the backrest forward, if necessary, to ensure that the backrest is in contact with the child re straint fixing system. Rear seat backrests, refer to page 98.

Seite 44

Controls Transporting children safely

44 Online Edition for Part no. 01 40 2 911 521 - VI/13

Notes Manufacturer's information for child re straint fixing systems

To select, mount and use child restraint fixing systems, observe the information provided by the system manufacturer; otherwise, the pro tective effect can be impaired.

On the front passenger seat

Deactivating the airbags After installing a child restraint fixing system on the front passenger seat, ensure that the front, side, and knee airbags on the front passenger side are deactivated.

Deactivating the front passenger airbags If a child restraint fixing system is used in

the front passenger seat, the front passenger airbags must be deactivated; otherwise, there is an increased risk of injury to the child when the airbags are triggered, even with a child re straint fixing system.

Seat position and height Before installing a child restraint fixing system, move the front passenger seat as far back as possible and adjust its height to the highest po sition to obtain the best possible position for the belt and to offer optimal protection in the event of an accident. Do not change this seat position once it has been set.

Child seat security

The graphic shows the MINI Countryman as an example. The rear safety belts and the safety belt for the front passenger can be locked to prevent ex tension in order to permit attachment of child restraint fixing systems.

To lock the safety belt 1. Secure the child restraint fixing system with

the belt. 2. Pull out the belt webbing completely. 3. Allow the belt webbing to be pulled in and

pull it taut against the child restraint fixing system.

The safety belt is locked.

To unlock the safety belt 1. Open the belt buckle. 2. Remove the child restraint fixing system. 3. Allow the belt webbing to be pulled in com

pletely. Center safety belt: unlock belt buckle 3 in addition, refer to page 40. Guide the safety belt to the holder on the headliner.

LATCH child restraint fix ing system LATCH: Lower Anchors and Tethers for Children.

Seite 45

Transporting children safely Controls

45Online Edition for Part no. 01 40 2 911 521 - VI/13

Notes Manufacturer's information for LATCH child restraint fixing systems

To mount and use the LATCH child restraint fix ing systems, observe the operating and safety information from the system manufacturer; otherwise, the level of protection may be re duced.

Mounts for the lower LATCH anchors The lower anchors may be used to attach the CRS to the vehicle seat up to a combined child and CRS weight of 65 lb/30 kg when the child is restrained by the internal harnesses.

Correctly engage the lower LATCH an chors

Make sure that the lower LATCH anchors have properly engaged and that the child restraint fixing system is resting snugly against the back rest; otherwise, the degree of protection of fered may be reduced.

Before installing the child seat, pull the belt out of the area for the child restraint fixing system.

MINI Countryman

The mounts for the lower LATCH anchors are located at the points indicated by the arrows.

MINI Paceman

The mounts for the lower LATCH anchors are located at the points indicated by the arrows.

Mounting LATCH child restraint fixing systems 1. Mount the child restraint fixing system; re

fer to the operating instructions of the sys tem.

2. Ensure that both LATCH anchors are prop erly connected.

Child restraint fixing systems with an upper re taining strap Mounting points

LATCH mounting eyes Only use the mounting eyes for the upper

LATCH retaining strap to secure child restraint fixing systems; otherwise, the mounting eyes could be damaged.

There are two additional mounting points for child restraint fixing systems with an upper re taining strap, arrows.

Seite 46

Controls Transporting children safely

46 Online Edition for Part no. 01 40 2 911 521 - VI/13

MINI Countryman

There are two additional mounting points for child restraint fixing systems with an upper re taining strap, arrows.

MINI Paceman

There are two additional mounting points for child restraint fixing systems with an upper re taining strap, arrows.

Guide of the upper LATCH retaining strap

Retaining strap Make sure the upper retaining strap does

not run over sharp edges and is not twisted as it passes to the top anchor. Otherwise, the strap will not properly secure the child restraint fixing system in the event of an accident.

Outer seats:

1 Direction of travel 2 Head restraint 3 Cargo area floor 4 Hook for upper retaining strap 5 Mounting point 6 Backrest 7 Upper retaining strap of child restraint fix

ing system

MINI Countryman, center seat

1 Direction of travel 2 Head restraint 3 Hook for upper retaining strap 4 Mounting point 5 Cargo area floor 6 Backrest 7 Upper retaining strap of child restraint fix

ing system

Seite 47

Transporting children safely Controls

47Online Edition for Part no. 01 40 2 911 521 - VI/13

Attaching the upper retaining strap to the mounting point 1. Slide the head restraint upward. 2. Center seat: fold the cargo area floor for

ward. 3. Guide the upper retaining strap between

the supports of the head restraint. 4. Attach the upper retaining strap to the

mounting point with the hook. 5. Slide the head restraint into the bottom po

sition. 6. Pull the upper retaining strap taut.

MINI Countryman: lock ing doors and windows Rear doors

Push the locking lever on the rear doors down. The door can now be opened from the outside only.

Safety switch for power window This locks the rear window switches so that the windows cannot be operated from the rear. Press the safety switch, refer to page 35.

Seite 48

Controls Transporting children safely

48 Online Edition for Part no. 01 40 2 911 521 - VI/13

Driving Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys tems.

Ignition lock Insert the remote control into the ignition lock

Insert the remote control all the way into the ignition lock.

Radio ready state is switched on. Individual electrical consumers can operate.

Removing the remote control from the ignition lock

Do not forcibly pull the remote control out of the ignition lock

Do not forcibly pull the remote control out of the ignition lock as this may cause damage.

Before removing the remote control, push it all the way in to release the locking mechanism. The ignition is switched off if it was on.

Automatic transmission You can only take out the remote control if transmission position P is engaged: interlock.

Start/Stop button

Pressing the Start/Stop button switches the ig nition on or off and starts the engine.

The engine starts when the Start/Stop button is pressed and: Manual transmission: the clutch is de

pressed. Automatic transmission: the brake is de

pressed.

Radio ready state Individual electrical consumers can operate. Radio ready state is switched off automatically: When the remote control is removed from

the ignition lock. With Comfort Access, refer to page 30, by

pressing the button on the door handle or

the button on the remote control. After a certain period of time.

Ignition on All electrical consumers can operate. Most indi cator and warning lamps light up for different lengths of time.

Seite 49

Driving Controls

49Online Edition for Part no. 01 40 2 911 521 - VI/13

To save battery power when the engine is off, switch off the ignition and any unnecessary electronic systems/power consumers.

Radio ready state and ignition off All indicator and warning lamps in the displays go out. The ignition switches off automatically when the driver's door is opened. Pressing the Start/ Stop button again switches the ignition back on. For example, the ignition is not switched off in the following situations: Depress the clutch or brake pedal. The low beams are switched on

Starting the engine General information

Enclosed areas Do not let the engine run in enclosed

areas; otherwise, breathing of exhaust fumes may lead to loss of consciousness and death. The exhaust gases contain carbon monoxide, an odorless and colorless but highly toxic gas.

Unattended vehicle Do not leave the car unattended with the

engine running; otherwise, it presents a poten tial source of danger. Before leaving the car with the engine running, shift to neutral or engage transmission posi tion P and set the handbrake firmly; otherwise, the vehicle may begin to roll.

Frequent starting in quick succession Avoid repeated futile attempts at starting

the car and avoid starting the car frequently in quick succession. Otherwise, the fuel is not burned or is inadequately burned, and there is the danger of overheating and damaging the catalytic converter.

Do not wait for the engine to warm-up while the vehicle remains stationary; start driving right away, but at moderate engine speeds. Do not depress the accelerator when starting the engine.

Starting the engine

Manual transmission Remote control in the ignition lock or, with Comfort Access, inside the vehicle, refer to page 30.

1. Depress the brake pedal. 2. Depress the clutch pedal. 3. Press the Start/Stop button. The ignition is activated automatically for a cer tain time and is stopped as soon as the engine starts.

Automatic transmission Remote control in the ignition lock or, with Comfort Access, inside the vehicle, refer to page 30.

1. Depress the brake pedal. 2. Move the selector lever to position P or N. 3. Press the Start/Stop button. The ignition is activated automatically for a cer tain time and is stopped as soon as the engine starts.

Seite 50

Controls Driving

50 Online Edition for Part no. 01 40 2 911 521 - VI/13

Engine stop General information

Take the remote control with you Take the remote control with you when

leaving the vehicle so that children, for exam ple, cannot operate the windows and injure themselves.

Set the handbrake and further secure the vehicle as required

Set the handbrake firmly when parking; other wise, the vehicle may roll. On steep upward and downward inclines, further secure the ve hicle, for example, by turning the steering wheel in the direction of the curb.

Before driving into a car wash To make it possible for the vehicle to roll in an automatic car wash, follow the information on Washing in automatic car washes, refer to page 186.

Switching off the engine

Manual transmission 1. With the vehicle at a standstill, press the

Start/Stop button. 2. Shift into first gear or reverse. 3. Set the handbrake firmly. 4. Remove the remote control from the igni

tion lock.

Automatic transmission 1. Engage transmission position P with the ve

hicle stopped. 2. Press the Start/Stop button. 3. Set the handbrake firmly. 4. Remove the remote control from the igni

tion lock.

Handbrake The concept The handbrake is primarily intended to prevent the vehicle from rolling while parked; it brakes the rear wheels. Also follow the instructions under Switching off the engine, refer to page 51.

Setting The lever engages automatically.

Releasing

Pull up slightly, press the button, and lower the lever.

Notes Using the handbrake while driving If it should become necessary to use the

handbrake while driving, do not pull the hand brake too forcefully. Keep the button on the handbrake lever pressed at all times. Excessive application of the handbrake can block the rear wheels and lead to fishtailing of the vehicle.

The brake lamps do not light up when the handbrake is pulled.

Seite 51

Driving Controls

51Online Edition for Part no. 01 40 2 911 521 - VI/13

Turn signal, high beams, headlamp flasher

1 Turn signal 2 Switching on the high beams 3 Switching off the high beams/headlamp

flasher

Turn signal Press the lever beyond the resistance point. To switch off manually, press the lever to the resistance point. Unusually rapid flashing of the indicator lamp indicates that a turn signal bulb has failed.

Signaling a turn briefly Press the lever to the resistance point and hold it there for as long as you want the turn signal to flash.

Triple turn signal activation Press the lever to the resistance point. The turn signal flashes three times.

This function can be activated or deactivated:

1. Switch on the ignition, refer to page 49. 2. Press the button on the turn indicator lever

repeatedly until "SET/INFO" is displayed.

3. Press and hold the button until the display changes.

4. Press the button repeatedly until the sym bol and "SET" are displayed.

5. Press and hold the button until the display changes.

6. Press the button repeatedly until the sym bol shown is displayed, arrow.

7. Press and hold the button until the display changes.

8. Press the button to select:

Seite 52

Controls Driving

52 Online Edition for Part no. 01 40 2 911 521 - VI/13

Turn signal flashes once.

Triple turn signal.

9. Press and hold the button until the display changes.

The setting is stored for the remote control cur rently in use.

Washer/wiper system Notes

Do not switch on the wipers if frozen Do not switch on the wipers if they are

frozen onto the windshield; otherwise, the wiper blades and the windshield wiper motor may be damaged.

Do not use the wipers on a dry windshield Do not use the wipers on a dry wind

shield; otherwise, the wiper blades may wear more rapidly or become damaged.

At a glance

1 Switching on wipers 2 Switching off wipers or brief wipe 3 Activating/deactivating intermittent wipe or

the rain sensor 4 Cleaning the windshield and headlamps

Switching on wipers Press the wiper lever upward, arrow 1. The lever automatically returns to its initial po sition when released.

Normal wiper speed Press up once. The system switches to operation in the inter mittent mode when the vehicle is stationary.

Fast wiper speed Press up twice or press once beyond the resist ance point. The system switches to normal speed when the vehicle is stationary.

Switching off wipers or brief wipe Press the wiper lever down, arrow 2. The lever automatically returns to its initial po sition when released. Brief wipe: press down once. To switch off normal wipe: press down

once. To switch off fast wipe: press down twice.

Intermittent wipe or rain sensor If the car is not equipped with a rain sensor, the intermittent-wipe time is a preset. If the car is equipped with a rain sensor, the time between wipes is controlled automatically and depends on the intensity of the rainfall. The rain sensor is mounted on the windshield, directly in front of the interior rearview mirror.

Deactivate the rain sensor in car washes Deactivate the rain sensor when passing

through an automatic car wash; otherwise, damage could be caused by undesired wiper activation.

Seite 53

Driving Controls

53Online Edition for Part no. 01 40 2 911 521 - VI/13

Activating intermittent wipe or rain sensor Press the button, arrow 3.

The symbol is shown in the tachometer.

Setting the sensitivity of the rain sensor 1. Switch on the ignition, refer to page 49. 2. Press the button on the turn indicator lever

repeatedly until "SET/INFO" is displayed.

3. Press and hold the button until the display changes.

4. Press the button repeatedly until the sym bol and "SET" are displayed.

5. Press and hold the button until the display changes.

6. Press the button to select the desired sensi tivity.

7. Wait or hold the button until the display changes. The settings were stored.

Deactivating intermittent wipe or rain sensor Press the button again, arrow 3.

Cleaning the windshield and headlamps Pull the lever, arrow 4. The system sprays washer fluid on the wind shield and activates the wipers briefly. When the vehicle lighting system is switched on, the headlamps are cleaned at regular and appropriate intervals.

Do not use the washer system at freezing temperatures

Do not use the washers if there is any danger that the fluid will freeze on the windshield; oth erwise, your vision could be obscured. For this reason, use antifreeze. Avoid using the washer when the reservoir is empty; otherwise, you could damage the pump.

Seite 54

Controls Driving

54 Online Edition for Part no. 01 40 2 911 521 - VI/13

Do not use the washing facilities when the hood is open

Only use the washing facilities when the hood is fully locked; otherwise, the headlamp washer system may become damaged.

Windshield washer nozzles The windshield washer nozzles are heated au tomatically while the engine is running or the ignition is switched on.

Rear window wiper

0 Resting position 1 Switching on intermittent wipe

Turn the cap to level 1. When reverse gear is engaged, the system switches to continuous operation.

2 Cleaning the rear window with intermittent wipe Turn the cap further to level 2 and hold.

3 Cleaning the rear window in the resting po sition Turn the cap to level 3 and hold.

The rear window wiper does not move if the cap is in position 1 before the ignition is switched on. To switch on the rear window wiper:

1. Move the cap to its basic position. 2. Select the required position again.

Do not use the washing mechanisms when the washer fluid reservoir is empty

Do not use washing mechanisms when the washer fluid reservoir is empty, otherwise you will damage the washer pump.

Washer fluid General information

Antifreeze for washer fluid Antifreeze is flammable and can cause in

juries if used improperly. Therefore, keep it away from sources of igni tion. Only keep it in the closed original container and inaccessible to children. Follow the notes and instructions on the con tainer. United States: The washer fluid mixture ratio is regulated by the U.S. EPA and many individual states; do not exceed the allowable washer fluid dilution ratios limits that apply. Follow the usage instructions on the washer fluid con tainer. Use BMW's Windshield Washer Concen trate or the equivalent.

Washer fluid reservoir Adding washer fluid Only add washer fluid when the engine is

cool, and then close the cover completely to avoid contact between the washer fluid and hot engine parts. Otherwise, there is the danger of fire and a risk to personal safety if the fluid is spilled.

Seite 55

Driving Controls

55Online Edition for Part no. 01 40 2 911 521 - VI/13

All washer nozzles are supplied from one reser voir.

The recommended minimum filling quantity is 0.2 US gal/1 liter. Fill with a mixture of window washing concen trate and water; if needed, add antifreeze ac cording to the manufacturer instructions. Mix the washer fluid before adding to maintain the correct mixing ratio. Do not fill in undiluted window washing con centrate and do not fill in pure water; this could damage the washer system. Do not mix window washing concentrate from different manufacturers; this could cause the washer nozzles to clog.

Manual transmission

Pay attention to the shift plane When shifting into 5th or 6th gear, push

the gearshift lever to the right; otherwise inad vertent shifting into the 3rd or 4th gear could lead to engine damage.

Reverse gear Select only when the vehicle is stationary. When the gearshift lever is pressed to the left, a slight resistance needs to be overcome.

Automatic transmission with Steptronic In addition to the fully automatic mode, gears can also be shifted manually using Steptronic, refer to page 57.

Parking the vehicle Secure the vehicle Before leaving the vehicle with the en

gine running, move the selector lever to posi tion P and set the handbrake; otherwise, the vehicle will begin moving.

Disengaging the remote control To remove the remote control from the ignition lock, first move the selector lever to position P and switch off the engine: interlock. Remove the remote control from the ignition lock, refer to page 49.

Selector lever positions P R N D M/S +

Displays in the tachometer

The selector lever position is displayed and the engaged gear, such as M4, is displayed in manual mode.

Seite 56

Controls Driving

56 Online Edition for Part no. 01 40 2 911 521 - VI/13

Changing selector lever positions With the ignition switched on or the engine

running, the selector lever can be moved out of position P.

When the vehicle is stationary, step on the brake before shifting out of P or N; other wise, the selector lever is locked: shiftlock.

Press on the brake pedal until you start driving

To prevent the vehicle from creeping after you select a driving position, maintain pres sure on the brake pedal until you are ready to start.

A lock prevents accidental shifting into selector lever positions R and P. To override the lock, press the button on the front of the selector lever, see arrow.

P Park Select only when the vehicle is stationary. The front wheels are blocked.

R is Reverse Select only when the vehicle is stationary.

N is Neutral For example, engage this position in a car wash. The vehicle can roll.

D Drive, automatic position Position for normal vehicle operation. All for ward gears are selected automatically.

Under normal operating conditions, fuel con sumption is lowest when you are driving in po sition D.

Kickdown Kickdown is used to achieve maximum driving performance. Press on the accelerator beyond the resistance point at the full throttle position.

Sport program and manual mode M/S

Activating the Sport program

Move the selector lever from position D toward the left into the M/S shifting slot.

The Sport program is activated and DS is dis played. This position is recommended for a per formance-oriented driving style. To deactivate the Sport program or manual mode M/S, move the selector lever to the right into position D.

Activating the M/S manual mode Move the selector lever from position D toward the left into the M/S shifting slot. Push the selector lever forward or backward. Manual mode becomes active and the gear is changed. The tachometer displays the engaged gear, e. g. M1. To shift up: press the selector lever back

ward. To shift down: press the selector lever for

ward.

Seite 57

Driving Controls

57Online Edition for Part no. 01 40 2 911 521 - VI/13

The vehicle only shifts up or down at appropri ate engine and road speeds, e.g., it does not shift down if the engine speed is too high. The selected gear is briefly displayed in the instru ment panel, followed by the current gear.

Shifting gears using the shift paddles on the steering wheel The shift paddles on the steering wheel allow you to shift gears quickly while keeping both hands on the steering wheel. When the shift paddles on the steering

wheel are used to shift gears while in auto matic mode, the transmission switches to manual mode.

If the shift paddles are not used to acceler ate or shift gears for a certain amount of time, the transmission switches back to au tomatic mode.

If the selector lever is in the M/S gear plane, manual mode remains active.

Pull one of the two shift paddles: The transmission shifts up.

Press one of the two shift paddles: The transmission shifts down.

The vehicle only shifts up or down at appropri ate engine and road speeds, e.g., it does not shift down if the engine speed is too high. The selected gear is briefly displayed in the instru ment panel, followed by the current gear.

Manually unlocking the selector lever lock If the selector lever is locked in position P al though the ignition is switched on, the brake is depressed, and the button on the selector lever is pressed, the selector lever lock can be over ridden:

1. Switch off the ignition. 2. Unclip the sleeve of the selector lever. 3. Pull the sleeve up over the selector lever

until the sleeve is inside out. Pull off the plug-in cable connector if nec essary.

4. Insert the pulling hook 1 into the loop on the passenger side. The pulling hook is found in the vehicle document portfolio or in the pouch of the wheel change set, refer to page 177.

5. Pull the loop upward. 6. Move the selector lever into the desired po

sition, pressing the button on the front of the selector lever.

Set the handbrake Before manually unlocking the selector

lever lock, pull the handbrake firmly; otherwise, the vehicle may roll away and cause personal injury or property damage.

Seite 58

Controls Driving

58 Online Edition for Part no. 01 40 2 911 521 - VI/13

Displays Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys tems.

Odometer, external tem perature display, clock At a glance

1 Current speed 2 Odometer, trip odometer, external temper

ature, time 3 Resetting the trip odometer

Press the button on the turn indicator lever to open information in display area 2. The following information is displayed consecu tively: Trip odometer Time External temperature

Trip odometer To display the trip odometer: briefly press knob 3. To reset the trip odometer: press knob 3 while the trip odometer is being displayed and the ig nition is switched on.

Time Set the time, refer to page 63.

External temperature, external temperature warning If the display drops to +37 /+3 , a signal sounds and a warning lamp lights up. There is the increased danger of ice.

Ice on roads Even at temperatures above

+37 /+3 , there can be a risk of ice on roads. Therefore, drive carefully on bridges and shady roads, for example, to avoid the increased dan ger of an accident.

Units of measure To set the respective units of measure, miles or km for the odometer and or for the exter nal temperature, refer to page 62.

Seite 59

Displays Controls

59Online Edition for Part no. 01 40 2 911 521 - VI/13

Tachometer

It is imperative that you avoid engine speeds in the red warning field. In this range, the fuel supply is interrupted to protect the engine.

Coolant temperature A warning lamp will come on if the coolant, and therefore the engine, becomes too hot. Check the coolant level, refer to page 168.

Fuel gauge

The arrow next to the fuel pump symbol on the fuel gauge indicates the side of the vehicle with the fuel filler flap. The vehicle inclination may cause the display to vary.

Notes on refueling, refer to page 148. Filling capacities, refer to page 207.

Range After the reserve range is reached:

The remaining LEDs change from orange to red, arrow.

The remaining range is shown on the tach ometer.

When a dynamic driving style is used, such as when corners are taken rapidly, engine functions are not ensured.

A warning lamp lights up below a range of ap prox. 30 miles/50 km.

Refuel promptly At the latest, refuel at a range below

30 miles/50 km; otherwise, the engine function is not ensured and damage may occur.

Computer Opening information in the tachometer

Press the button on the turn indicator lever.

Overview of the information The following information is displayed consecu tively by repeatedly pressing the button on the turn indicator lever: Range. Average fuel consumption. Current fuel consumption. Average speed. To set the corresponding units of measure, re fer to page 62.

Seite 60

Controls Displays

60 Online Edition for Part no. 01 40 2 911 521 - VI/13

Information in detail

Range Displays the estimated cruising range available with the remaining fuel. It is calculated based on your driving style over the last 18 miles/30 km.

Average fuel consumption This is calculated for the period during which the engine is running. To reset the average consumption: press the button on the turn indicator lever for ap prox. 2 seconds.

Current fuel consumption Displays the current fuel consumption. You can check whether you are currently driving in an efficient and environmentally-friendly manner.

Average speed Periods in which the vehicle was parked and the engine was switched off manually are not included in the average speed calculations. To reset the average speed: press the button on the turn indicator lever for approx. 2 sec onds.

Radio MINI Boost CD: displays on the radio Some computer functions can also be shown on the radio display, refer to page 125.

Settings and information Operating concept Some settings and information can only be cre ated or opened while the ignition is switched on, the vehicle is standing, and the doors are closed.

1 Button for: Selecting the display. Setting values. Confirming the selected display or set

values. Calling up computer information60.

Symbol Function

Set the rain sensor, refer to page 53.

Open Check-Control, refer to page 65.

View service requirement dis play, refer to page 64

Initialize the Flat Tire Monitor, refer to page 75. Resetting the Tire Pressure Monitor, refer to page 78.

Set the formats and units of measure, reset to the factory settings, refer to page 62.

Seite 61

Displays Controls

61Online Edition for Part no. 01 40 2 911 521 - VI/13

Symbol Function

Personal Profile settings, refer to page 22.

Exit the menu.

Exiting displays

1. Press the button on the turn indicator lever repeatedly until "HOME" is displayed.

2. Hold the button down. The current speed is displayed again. Displays are also exited if no entries are made within approx. 8 seconds.

Next setting or information

1. Within a setting or information display, press the button on the turn indicator lever repeatedly until "NEXT" is displayed.

2. Hold the button down. Direct change to the next setting or piece of in formation.

Formats and units of measure The formats and units of measure can be set. The settings are stored for the remote control in use.

1. Switch on the ignition, refer to page 49. 2. Press the button on the turn indicator lever

repeatedly until "SET/INFO" is displayed.

3. Press and hold the button until the display changes.

4. Press the button repeatedly until the sym bol and "SET" are displayed.

5. Press and hold the button until the display changes.

6. Press the button repeatedly until the sym bol shown is displayed, arrow. Fuel consumption: l/100 km, mpg,

km/l

Seite 62

Controls Displays

62 Online Edition for Part no. 01 40 2 911 521 - VI/13

Distance: km, mi. Temperature: ,

7. Press and hold the button until the display changes.

8. Press the button to change the format or the unit of measure.

9. Press and hold the button until the display changes. The settings are stored.

Resetting to factory settings The settings for formats and units of measure can be reset to the factory settings. The settings are stored for the remote control in use.

1. Press the button on the turn indicator lever repeatedly until "SET/INFO" is displayed.

2. Press and hold the button until the display changes.

3. Press the button repeatedly until the sym bol and "SET" are displayed.

4. Press and hold the button until the display changes.

5. Press the button repeatedly until "RESET" appears on the display.

6. Press and hold the button until the display changes to the first setting option. The settings are reset.

Clock Setting the time Radio MINI Boost CD: setting the time, refer to page 124.

Date Setting the date Radio MINI Boost CD: set the date, refer to page 124.

Seite 63

Displays Controls

63Online Edition for Part no. 01 40 2 911 521 - VI/13

Service requirements

The remaining driving distance and the date of the next scheduled service are displayed briefly immediately after you start the engine or switch on the ignition.

The current service requirements can be read out from the remote control by the service spe cialist.

Displaying the vehicle check For certain maintenance operations, you can view the distance remaining or the due date for that operation in the tachometer.

1. Switch on the ignition, refer to page 49. 2. Press the button on the turn indicator lever

repeatedly until "SET/INFO" is displayed.

3. Press and hold the button until the display changes.

4. Press the button repeatedly until the corre sponding symbol and "SERVICE-INFO" are displayed.

5. Press and hold the button until the display changes.

6. Press the button to display the individual service requirement items.

Possible displays

1 Button for selecting the information.

Symbol Function

Service requirements

Engine oil

Seite 64

Controls Displays

64 Online Edition for Part no. 01 40 2 911 521 - VI/13

Symbol Function

Roadworthiness test

Front brake pads

Rear brake pads

Brake fluid

Exit the display, refer to page 62

Next setting or information, re fer to page 62

Check Control The concept The Check Control monitors vehicle functions and alerts you to any malfunctions in the sys tems being monitored. A Check Control message consists of indicator and warning lamps in the instrument cluster and, in some circumstances, an acoustic signal.

Indicator/warning lamps

The indicator and warning lamps can light up in a variety of combinations and colors in display area 1 or 2.

Several of the lamps are checked for proper functioning and light up temporarily when the engine is started or the ignition is switched on.

The symbol indicates that Check Control messages have been stored. The Check Control messages can be displayed later.

What to do in case of a malfunction The meaning of each lamp in the event of a malfunction and tips on how to respond are provided in the list, refer to page 190.

Seite 65

Displays Controls

65Online Edition for Part no. 01 40 2 911 521 - VI/13

Hiding Check Control messages

Press the button on the turn indicator lever.

Some Check Control messages are displayed continuously and are not cleared until the mal function is eliminated. If several malfunctions occur at once, the messages are displayed con secutively. Other Check Control messages are hidden au tomatically after approx. 20 seconds. However, they are stored and can be displayed again later.

Viewing stored Check Control messages The stored Check Control messages can only be displayed while the driver's door is closed.

1. Press the button on the turn indicator lever repeatedly until "SET/INFO" is displayed.

2. Press and hold the button until the display changes.

3. Press the button repeatedly until the corre sponding symbol and "CHECK INFO" ap pear on the display.

4. Press and hold the button. If there is no Check Control message, this is indicated by "CHECK OK. If a Check Control message has been stored, the corresponding message is dis played.

5. Press the button to check for other mes sages.

Seite 66

Controls Displays

66 Online Edition for Part no. 01 40 2 911 521 - VI/13

Lamps Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys tems.

At a glance

0 Lamps off / daytime running lights 1 Parking lamps and daytime running lights 2 Low-beam headlamps and welcome lamps 3 Automatic headlamp control, Adaptive

Light Control, daytime running lights, and welcome lamps

Parking lamps/low beams, headlamp con trol General information When the driver's door is opened with the igni tion switched off, the exterior lighting is auto matically switched off when the light switch is in position 0, 2, or 3.

Switch on the parking lamps if necessary, switch position 1.

Parking lamps Switch position 1: the vehicle lamps light up on all sides. Do not use the parking lamps for extended pe riods; otherwise, the battery may become dis charged and it would then be impossible to start the engine. When parking, it is preferable to switch on the one-sided roadside parking lamps, refer to page 68.

Low beams Switch position 2: the low beams are lit when the ignition is switched on.

Automatic headlamp control Switch position 3: the low beams are switched on and off automatically depending on the am bient light, e.g., in tunnels, in twilight, or if there is precipitation. Adaptive Light Control is active. A blue sky with the sun low on the horizon can cause the lights to be switched on. The low beams remain switched on independ ent of the ambient lighting conditions when you switch on the front fog lamps.

Personal responsibility The automatic headlamp control cannot

serve as a substitute for your personal judg ment in determining when the lamps should be switched on in response to ambient lighting conditions. For example, the sensors are unable to detect fog or hazy weather. To avoid safety risks, you should always switch on the lamps manually under these conditions.

Seite 67

Lamps Controls

67Online Edition for Part no. 01 40 2 911 521 - VI/13

When the daytime running lights are activated, the low beams are always switched on in switch position 3 when the ignition is switched on. The exterior lighting goes out automatically af ter the vehicle is switched off.

High beams/roadside parking lamps

1 Turn signal/roadside parking lamp 2 Switching on the high beams 3 Switching off the high beams/headlamp

flasher

To assist in parking, the vehicle can be illumi nated on one side; note the country-specific regulations. The roadside parking lamps drain the battery. Therefore, do not leave them on for unduly long periods of time; otherwise, the battery might not have enough power to start the en gine.

Switching on the roadside parking lamp To switch on the roadside parking lamp on the left or right, press the turn indicator lever up or down after switching off the vehicle, arrow 1.

Switching off the roadside parking lamp Press the lever up or down to the resistance point.

Daytime running lights The daytime running lights light up in switch position 0, 1, or 3 when the ignition is switched on.

The exterior lighting goes out automatically af ter the vehicle is switched off. In switch position 1, the parking lamps light up after the ignition is switched off.

Activating/deactivating 1. Switch on the ignition, refer to page 49. 2. Press the button on the turn indicator lever

repeatedly until "SET/INFO" is displayed.

3. Press and hold the button until the display changes.

4. Press the button repeatedly until the sym bol and "SET" are displayed.

5. Press and hold the button until the display changes.

Seite 68

Controls Lamps

68 Online Edition for Part no. 01 40 2 911 521 - VI/13

6. Press the button repeatedly until the sym bol shown is displayed, arrow.

7. Press and hold the button until the display changes.

8. Press the button to select:

Daytime running lights are activated.

Daytime running lights are deactivated. 9. Hold the button down. The setting is stored for the remote control cur rently in use.

Welcome lamps If the light switch stays in switch position 2 or 3 after the vehicle is switched off, the parking lamps and the interior lamps light up for a cer tain period when the vehicle is unlocked.

Headlamp courtesy delay feature The low beams stay lit for a short while after the ignition is switched off, if the lamps are switched off and the headlamp flasher is switched on.

Setting the duration 1. Switch on the ignition. 2. Press the button on the turn indicator lever

repeatedly until "SET/INFO" is displayed. 3. Press and hold the button until the display

changes.

4. Press the button repeatedly until the sym bol and "SET" are displayed.

5. Press and hold the button until the display changes.

6. Press the button repeatedly until the sym bol shown is displayed, arrow.

7. Press and hold the button until the display changes.

8. Press the button to select:

The function is deactivated. ...

Select the duration, e.g. 40 seconds. 9. Hold the button down. The setting is stored for the remote control cur rently in use.

Adaptive Light Control The concept Adaptive Light Control is a variable headlamp control system that enables dynamic illumina tion of the road surface.

Seite 69

Lamps Controls

69Online Edition for Part no. 01 40 2 911 521 - VI/13

Depending on the steering angle and other pa rameters, the light from the headlamp follows the course of the road.

Activating With the ignition switch on, turn the light switch to position 3, refer to page 67. To avoid blinding oncoming traffic, the Adap tive Light Control does not swivel to the driver's side when the vehicle is at a standstill. When driving in reverse, Adaptive Light Control is not active.

Malfunction The warning lamp lights up. Adaptive Light Control is malfunctioning or has failed. Have the system checked as

soon as possible. More information, refer to page 190.

Fog lamps At a glance

To switch on the front fog lamps: press the switch. To switch off, press the respective switch up ward or downward again.

Fog lamps The parking lamps or low beams must be switched on. The green indicator lamp lights up when the front fog lamps are switched on.

Depending on the vehicle equipment, the front fog lamps are switched off when the headlamp flasher or the high beams are activated. If the automatic headlamp control is activated, refer to page 67, the low beams are switched on automatically when the front fog lamps are switched on.

Instrument lighting The parking lamps or low beams must be switched on to adjust the brightness. The brightness is increased to a certain limit and is then reduced again.

Press the button briefly: the brightness changes in stages.

Press and hold the button: the brightness changes continuously.

Interior lamps The interior lamps, the footwell lamps and the cargo area lamp are controlled automatically. To avoid draining the battery, all lamps inside the vehicle are switched off some time after the ignition is switched off.

Seite 70

Controls Lamps

70 Online Edition for Part no. 01 40 2 911 521 - VI/13

Switching interior lamps on/off manually

To switch the interior lamps on/off: press the switch.

If the interior lamps are to remain switched off, press the switch for approx. 3 seconds.

Reading lamps Reading lamps are located in the front next to the interior lamp and in the rear.

Switching the reading lamps on/off Front: press the switch. Rear: press the button.

Ambient lighting The color and brightness of the ambient light ing can be changed.

Press the switch forward: the color changes in steps. Press the switch back: the brightness changes in steps.

Intermediate settings and intermediate colors are possible. For continuously changing colors of the ambi ent lighting, press the switch forward for more than 10 seconds.

Seite 71

Lamps Controls

71Online Edition for Part no. 01 40 2 911 521 - VI/13

Safety Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This

also applies to safety-related functions and sys tems.

Airbags The graphic shows the MINI Paceman as an ex ample.

1 Front airbags 2 Knee airbag

3 Side airbag 4 Head airbags

Front airbags Front airbags help protect the driver and front passenger by responding to frontal impacts in which safety belts alone cannot provide ade quate restraint.

Side airbags In a lateral impact, the side airbag supports the side of the body in the chest and lap area.

Head airbags In a lateral impact, the head airbag supports the head.

Knee airbag The knee airbag supports the legs in a frontal impact.

Seite 72

Controls Safety

72 Online Edition for Part no. 01 40 2 911 521 - VI/13

Protective action Airbags are not triggered in every impact situa tion, e.g., in less severe accidents or rear-end collisions.

Information on how to ensure the opti mal protective effect of the airbags

Keep at a distance from the airbags. Always grasp the steering wheel on the

steering wheel rim, holding your hands at the 3 o'clock and 9 o'clock positions, to keep the danger of injury to your hands or arms as low as possible if the airbag is trig gered.

There should be no people, animals, or ob jects between an airbag and a person.

Do not use the cover of the front airbag on the front passenger side as a storage area.

Keep the dashboard and window on the front passenger side clear, i.e., do not cover with adhesive labels or coverings, and do not attach holders such as for navigation in struments and mobile phones.

Make sure that the front passenger is sitting correctly, i.e., keeps his or her feet and legs in the footwell; otherwise, leg injuries can occur if the front airbag is triggered.

Do not place slip covers, seat cushions or other objects on the front passenger seat that are not approved specifically for seats with integrated side airbags.

Do not hang pieces of clothing, such as jackets, over the backrests.

Make sure that occupants keep their heads away from the side airbag and do not rest against the head airbag; otherwise, injuries can occur if the airbags are triggered.

Do not remove the airbag restraint system. Do not remove the steering wheel. Do not apply adhesive materials to the air

bag cover panels, cover them or modify them in any way.

Never modify either the individual compo nents or the wiring in the airbag system. This also applies to steering wheel covers, the dashboard, the seats, the roof pillars and the sides of the headliner.

Even when all instructions are followed closely, injury from contact with the airbags cannot be ruled out in certain situations. The ignition and inflation noise may lead to short-term and, in most cases, temporary hear ing impairment in sensitive individuals.

In the case of a malfunction, deactivation and after triggering of the airbags

Do not touch the individual components imme diately after the system has been triggered; otherwise, there is the danger of burns. Only have the airbags checked, repaired or dis mantled and the airbag generator scrapped by your service center or a workshop that has the necessary authorization for handling explo sives. Non-professional attempts to service the sys tem could lead to failure in an emergency or undesired triggering of the airbag, either of which could result in injury.

Warning notices and information about the air bags can also be found on the sun visors.

Automatic deactivation of the front passenger airbags The system determines whether the front pas senger seat is occupied by measuring the elec trical resistance of the human body. The front, side, and knee airbags on the front passenger side are activated or deactivated ac cordingly by the system. The indicator lamp above the interior rearview mirror, refer to page 74, shows the current status of the front passenger airbags, deacti vated or activated.

Seite 73

Safety Controls

73Online Edition for Part no. 01 40 2 911 521 - VI/13

Leave feet in the footwell Make sure that the front passenger keeps

his or her feet in the footwell; otherwise, the front passenger airbags may not function prop erly.

Child restraint fixing system in the front passenger seat

Before transporting a child on the front passen ger seat, read the safety and operating instruc tions under Transporting children safely, refer to page 44.

Malfunction of the automatic deactivation system When transporting older children and adults, the front passenger airbags may be deactivated in certain sitting positions. In this case, the indi cator lamp for the front passenger airbags lights up. In this case, change the sitting position so that the front passenger airbags are activated and the indicator lamp goes out. If it is not possible to activate the airbags, have the person sit in the rear. To make sure that occupation of the seat cush ion can be detected correctly: Do not attach seat covers, seat cushion

padding, ball mats, or other items to the front passenger seat unless they are specifi cally recommended by the manufacturer of your MINI.

Do not place electronic devices on the pas senger seat if a child restraint fixing system is mounted on the seat.

Do not place objects under the seat that could press against the seat from below.

Indicator lamp for the front passenger airbags

The indicator lamp for the front passenger air bags indicates the operating state of the front passenger airbags. The lamp indicates whether the airbags are ac tivated or deactivated.

The indicator lamp lights up when a child who is properly seated in a child restraint fix ing system intended for that purpose is detected on the seat or the seat is empty. The airbags on the front passen ger side are not activated.

The indicator lamp does not light up when, for example, a correctly seated person of sufficient size is detected on the seat. The airbags on the front passenger side are ac tivated.

Most child seats are detected by the system, Especially the child seats required by NHTSA at the time that the vehicle was manufactured. After installing a child seat, make sure that the indicator lamp for the front passenger airbags lights up. This indicates that the child seat has been detected and the front passenger airbags are not activated.

Seite 74

Controls Safety

74 Online Edition for Part no. 01 40 2 911 521 - VI/13

Operational readiness of airbag system

In the radio ready state and beyond, re fer to page 49, the warning lamp lights up briefly to indicate that the entire air

bag system and the belt tensioners are opera tional.

Airbag system malfunction Warning lamp does not light up in the radio

ready state. Warning lamp remains permanently on.

Have the airbag system checked without delay if there is a malfunction

In the event of a malfunction in the airbag sys tem, have it checked without delay; otherwise, there is the risk that the system will not func tion as intended even if a sufficiently severe ac cident occurs.

FTM Flat Tire Monitor The concept The system does not measure the actual infla tion pressure in the tires. The system detects a pressure loss in a tire by comparing the rotational speeds of the individ ual wheels while moving. In the event of a pressure loss, the diameter and therefore the rotational speed of the corre sponding wheel change. This is detected and reported as a flat tire.

Functional requirements The system must have been initialized when the tire inflation pressure was correct; other wise, reliable signaling of a flat tire is not en sured. Initialize the system after each correction of the tire inflation pressure and after every tire or wheel change.

System limits Sudden tire damage Sudden serious tire damage caused by

external influences cannot be indicated in ad vance.

A natural, even pressure loss in all four tires cannot be detected. Therefore, check the tire inflation pressure regularly. The system could be delayed or malfunction in the following situations: When the system has not been initialized. When driving on a snowy or slippery road

surface. Sporty driving style: slip in the drive wheels,

high lateral acceleration. When driving with snow chains.

Initialization The initialization process adopts the set infla tion tire pressures as reference values for the detection of a flat tire. Initialization is started by confirming the inflation pressures.

Seite 75

Safety Controls

75Online Edition for Part no. 01 40 2 911 521 - VI/13

Do not initialize the system when driving with snow chains.

1. Start the engine, but do not start driving. 2. Press the button on the turn indicator lever

repeatedly until "SET/INFO" is displayed.

3. Press and hold the button until the display changes.

4. Press the button repeatedly until the corre sponding symbol and "RESET" are dis played.

5. Press and hold the button until the display changes.

6. Drive away. Initialization is completed while the car is traveling without feedback being given.

Indication of a flat tire The warning lamps come on in yellow and red. In addition, a signal sounds.

There is a flat tire or a major loss in tire inflation pressure.

1. Reduce your speed and stop cautiously. Avoid sudden braking and steering maneu vers.

2. Check whether the vehicle is fitted with regular tires or run-flat tires. Run-flat tires, refer to page 160, are la beled with a circular symbol containing the letters RSC marked on the tire sidewall.

Do not continue driving without run-flat tires

Do not continue driving if the vehicle is not equipped with run-flat tires; continued driving may result in serious accidents.

When a flat tire is indicated, DSC Dynamic Sta bility Control is switched on if necessary.

Actions in the event of a flat tire

Normal tires 1. Identify the damaged tire.

Do this by checking the inflation pressure in all four tires. The tire pressure gauge of the Mobility Sys tem, refer to page 161, can be used for this purpose. If the tire inflation pressure in all four tires is correct, the Flat Tire Monitor may not have been initialized. In this case, initialize the system. If an identification is not possible, please contact the service center.

2. Rectify the flat tire using the Mobility Sys tem, refer to page 161.

Run-flat tires You can continue driving with a damaged tire at speeds up to 50 mph/80 km/h.

Seite 76

Controls Safety

76 Online Edition for Part no. 01 40 2 911 521 - VI/13

Continued driving with a flat tire If continuing to drive with a damaged tire:

1. Avoid sudden braking and steering maneu vers.

2. Do not exceed a speed of 50 mph/80 km/h. 3. At the next opportunity, check the inflation

pressure in all four tires. If the tire inflation pressure in all four tires is correct, the Flat Tire Monitor may not have been initialized. In this case, initialize the system.

Possible driving distance with complete loss of tire inflation pressure: The possible driving distance after a loss of tire inflation pressure depends on the cargo load and the driving style and conditions. For a vehicle containing an average load, the possible driving distance is ap prox. 50 miles/80 km. When the vehicle is driven with a damaged tire, its handling characteristics change, e.g., re duced lane stability during braking, a longer braking distance, and altered self-steering properties. Adjust your driving style accord ingly. Avoid abrupt steering maneuvers or driv ing over obstacles, e. g., curbs, potholes, etc. Because the possible driving distance depends on how the vehicle is used during the trip, the actual distance may be smaller or greater de pending on the driving speed, road conditions, external temperature, cargo load, etc.

Continued driving with a flat tire Drive moderately and do not exceed a

speed of 50 mph/80 km/h. A loss of tire inflation pressure results in a change in the handling characteristics, e.g., re duced lane stability during braking, a longer braking distance and altered self-steering prop erties.

Final tire failure Vibrations or loud noises while driving

can indicate the final failure of the tire. Reduce speed and stop; otherwise, pieces of the tire could come loose and cause an accident. Do not continue driving, and contact your service center.

Tire Pressure Monitor TPM The concept The tire inflation pressure is measured in the four mounted tires. The system notifies you if there is a significant loss of pressure in one or more tires.

Functional requirements The system must have been reset while the in flation pressure was correct; otherwise, reliable signaling of a flat tire is not ensured. Always use wheels with TPM electronics to en sure that the system will operate properly. Reset the system after each correction of the tire inflation pressure and after every tire or wheel change.

System limits Sudden tire damage Sudden serious tire damage caused by

external influences cannot be indicated in ad vance.

The system does not operate correctly if it has not been reset. For example, a flat tire may be indicated despite correct tire inflation pres sures. The system is inactive and cannot indicate a flat tire: For a mounted wheel without TPM elec

tronics.

Seite 77

Safety Controls

77Online Edition for Part no. 01 40 2 911 521 - VI/13

When the TPM is disturbed by other sys tems or devices with the same radio fre quency.

Resetting the system Reset the system after each correction of the tire inflation pressure and after every tire or wheel change.

1. Start the engine, but do not start driving. 2. Press the button on the turn indicator lever

repeatedly until "SET/INFO" is displayed.

3. Press and hold the button until the display changes.

4. Press the button repeatedly until the sym bol for the Tire Pressure Monitor and "AC TIVE" are displayed. The Tire Pressure Mon itor can be reset with "RESET".

5. Press and hold the button until "RESET TING" is displayed.

6. Drive away. After driving a few minutes, the set inflation pressures in the tires are accepted as the target values to be monitored. The system reset is completed during your drive, and can be interrupted at any time. When driv ing resumes, the reset is continued auto matically. The indicator lamp goes out after the system reset is completed.

Low tire pressure message The warning lamps come on in yellow and red. In addition, a signal sounds.

There is a flat tire or substantial loss of infla tion pressure on the indicated wheel.

The system was not reset after a wheel change and thus issues warnings based on the inflation pressures initialized last.

1. Reduce your speed and stop cautiously. Avoid sudden braking and steering maneu vers.

2. Check whether the vehicle is fitted with regular tires or run-flat tires. Run-flat tires, refer to page 160, are la beled with a circular symbol containing the letters RSC marked on the tire sidewall.

Seite 78

Controls Safety

78 Online Edition for Part no. 01 40 2 911 521 - VI/13

Do not continue driving without run-flat tires

Do not continue driving if the vehicle is not equipped with run-flat tires; continued driving may result in serious accidents.

When a low inflation pressure is indicated, DSC Dynamic Stability Control is switched on if nec essary.

Actions in the event of a flat tire

Normal tires 1. Identify the damaged tire.

Do this by checking the air pressure in all four tires. The tire pressure gauge of the Mobility System, refer to page 161, can be used for this purpose. If the tire inflation pressure in all four tires is correct, the Tire Pressure Monitor may not have been reset. Reset the system. If an identification is not possible, please contact the service center.

2. Rectify the flat tire using the Mobility Sys tem, refer to page 161. Use of tire sealant, e.g., the Mobility Sys tem, may damage the TPM wheel electron ics. In this case, have the electronics checked at the next opportunity and have them replaced if necessary.

Run-flat tires You can continue driving with a damaged tire at speeds up to 50 mph/80 km/h.

Do not continue driving without run-flat tires

Do not continue driving if the vehicle is not equipped with run-flat tires; continued driving may result in serious accidents.

Continued driving with a flat tire If continuing to drive with a damaged tire:

1. Avoid sudden braking and steering maneu vers.

2. Do not exceed a speed of 50 mph/80 km/h. 3. Check the air pressure in all four tires at the

next opportunity. If the tire inflation pressure in all four tires is correct, the Tire Pressure Monitor may not have been reset. Reset the system.

Possible driving distance with complete loss of tire inflation pressure: The possible driving distance after a loss of tire inflation pressure depends on the cargo load and the driving style and conditions. For a vehicle containing an average load, the possible driving distance is ap prox. 50 miles/80 km. When the vehicle is driven with a damaged tire, its handling characteristics change, e.g., re duced lane stability during braking, a longer braking distance, and altered self-steering properties. Adjust your driving style accord ingly. Avoid abrupt steering maneuvers or driv ing over obstacles, e. g., curbs, potholes, etc. Because the possible driving distance depends on how the vehicle is used during the trip, the actual distance may be smaller or greater de pending on the driving speed, road conditions, external temperature, cargo load, etc.

Continued driving with a flat tire Drive moderately and do not exceed a

speed of 50 mph/80 km/h. A loss of tire inflation pressure results in a change in the handling characteristics, e.g., re duced lane stability during braking, a longer braking distance and altered self-steering prop erties.

Seite 79

Safety Controls

79Online Edition for Part no. 01 40 2 911 521 - VI/13

Final tire failure Vibrations or loud noises while driving

can indicate the final failure of the tire. Reduce speed and stop; otherwise, pieces of the tire could come loose and cause an accident. Do not continue driving, and contact your service center.

Malfunction The small warning lamp flashes in yel low and then lights up continuously; the larger warning lamp comes on in yel low.

No flat tire can be detected. Display in the following situations: A wheel without TPM electronics is

mounted: Have the system checked by the service center if necessary.

Malfunction: Have the system checked.

TPM could not be fully reset; reset the sys tem again.

The small warning lamp flashes in yel low and then lights up continuously; the larger warning lamp comes on in yel low.

No flat tire can be detected. Display in the following situation: Disturbance by other systems or devices

with the same radio frequency After leaving the area of the disturbance, the system automatically becomes active again.

Declaration according to NHTSA/FMVSS 138 Tire Pressure Monitoring Systems Each tire, including the spare (if provided) should be checked monthly when cold and in flated to the inflation pressure recommended by the vehicle manufacturer on the vehicle

placard or tire inflation pressure label (If your vehicle has tires of a different size than the size indicated on the vehicle placard or tire inflation pressure label, you should determine the proper tire inflation pressure for those tires.). As an added safety feature, your vehicle has been equipped with a tire pressure monitoring system (TPMS) that illuminates a low tire pres sure telltale when one or more of your tires is significantly under-inflated. Accordingly, when the low tire pressure telltale illuminates, you should stop and check your tires as soon as possible, and inflate them to the proper pres sure. Driving on a significantly under-inflated tire causes the tire to overheat and can lead to tire failure. Under-inflation also reduces fuel ef ficiency and tire tread life, and may affect the vehicle's handling and stopping ability. Please note that the TPMS is not a substitute for proper tire maintenance, and it is the driver's responsibility to maintain correct tire pressure, even if under-inflation has not reached the level to trigger illumination of the TPMS low tire pressure telltale. Your vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not operating properly. The TPMS malfunction indicator is combined with the low tire pressure telltale. When the system detects a malfunction, the telltale will flash for approxi mately one minute and then remain continu ously illuminated. This sequence will continue upon subsequent vehicle startups as long as the malfunction exists. When the malfunction indicator is illuminated, the system may not be able to detect or signal low tire pressure as in tended. TPMS malfunctions may occur for a va riety of reasons, including the installation of re placement or alternate tires or wheels on the vehicle that prevent the TPMS from functioning properly. Always check the TPMS malfunction telltale after replacing one or more tires or wheels on your vehicle to ensure that the re placement or alternate tires and wheels allow the TPMS to continue to function properly.

Seite 80

Controls Safety

80 Online Edition for Part no. 01 40 2 911 521 - VI/13

Driving stability control systems Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys tems.

Antilock Brake System ABS ABS prevents locking of the wheels during braking. Steerability is maintained even during full brak ing. This increases active driving safety. ABS is operational every time you start the en gine.

Electronic brake-force distribution EBV The system controls the brake pressure in the rear wheels to ensure stable braking behavior.

CBC Cornering Brake Control When braking in curves or during a lane change, driving stability and steering response are improved further.

Brake assistant When the brakes are applied rapidly, this sys tem automatically produces the maximum braking force boost. In this way, the system helps keep the braking distance as short as possible. This system utilizes all of the benefits provided by ABS.

Do not reduce the pressure on the brake pedal for the duration of full braking.

Dynamic Stability Con trol DSC The concept DSC prevents traction loss in the driving wheels when driving away and accelerating. DSC also recognizes unstable vehicle condi tions, such as fishtailing or nose-diving. Subject to physical limits, DSC helps to keep the vehicle on a steady course by reducing engine speed and by applying brakes to the individual wheels. DSC is operational every time you start the en gine.

Adjust your driving style to the situation An appropriate driving style is always the

responsibility of the driver. The laws of physics cannot be repealed, even with DSC. Do not reduce the additional safety margin with a risky driving style, as otherwise there is a risk of an accident.

Deactivating DSC

Press the switch until the DSC OFF indicator lamp lights up in the speedometer and DSC OFF

Seite 81

Driving stability control systems Controls

81Online Edition for Part no. 01 40 2 911 521 - VI/13

appears in the tachometer. DSC is deactivated. Intervening measures to stabilize the vehicle and give it forward momentum are no longer executed.

When driving with snow chains or to rock the vehicle free of snow, it may be useful to deacti vate DSC temporarily. To increase vehicle stability, activate DSC again as soon as possible.

Activating DSC Press the switch again; the DSC indicator lamps in the display elements go out.

Indicator/warning lamps The indicator lamp in the tachometer flashes: DSC is controlling the drive forces and brake forces.

The indicator lamp lights up: DSC and DTC has failed.

The indicator lamp in the speedometer lights up and DSC OFF appears in the tachometer.

DSC and DTC deactivated.

Dynamic Traction Con trol DTC The concept The DTC system is a version of the DSC in which forward momentum is optimized.

The system ensures maximum forward mo mentum on special road conditions, e.g., unp lowed snowy roads, but driving stability is lim ited. It is therefore necessary to drive with appropri ate caution. You may find it useful to briefly activate DTC under the following special circumstances: When driving in sand, on snowy inclines, in

slush, or on unplowed, snow-covered road surfaces

When rocking a vehicle free or starting off in deep snow, sand, or on loose ground

When driving with snow chains.

Activating DTC

Press the switch; the DSC OFF indicator lamp lights up in the speedometer and TRACTION appears in the tachometer. Dynamic Stability Control DSC is deactivated, Dynamic Traction Control DTC is activated.

Deactivating DTC Press the switch again; the DSC OFF indicator lamp in the speedometer and TRACTION in the tachometer go out.

Indicator/warning lamps The indicator lamp in the tachometer flashes: DTC is controlling the drive forces and brake forces.

The indicator lamp lights up: DSC and DTC has failed.

Seite 82

Controls Driving stability control systems

82 Online Edition for Part no. 01 40 2 911 521 - VI/13

The indicator lamp in the speedometer lights up and TRACTION appears in the tachometer.

DTC is activated.

Hill drive-off assistant This system supports driving away on gradients. The handbrake is not required.

1. Hold the vehicle in place with the foot brake.

2. Release the foot brake and drive away without delay.

Driving off without delay After releasing the foot brake, start driv

ing without delay, since the drive-off assistant will not hold the vehicle in place for more than approx. 2 seconds and the vehicle will begin rolling back.

ALL4 all-wheel system ALL4 is the all-wheel system of your MINI. The combined effects of ALL4 and DSC further opti mize the traction and dynamic driving charac teristics. The ALL4 all-wheel system variably distributes the drive forces to the front and rear axles depending on the driving situation and prevailing road conditions.

Sport button When this button is pressed, the vehicle re sponds in an even sportier manner. The engine responds more spontaneously

to accelerator movements. The steering responds more directly. Cooper S, John Cooper Works: the engine

sounds sportier when coasting. For automatic transmissions: more rapid

gear changes in the Sport program.

Activating the system

Press the switch; the LED in the button lights up and SPORT is displayed briefly in the tachome ter.

Deactivating the system Press the switch again. Switch the engine off.

Seite 83

Driving stability control systems Controls

83Online Edition for Part no. 01 40 2 911 521 - VI/13

Driving comfort Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys tems.

Cruise control The concept The system is functional at speeds beginning at approx. 20 mph/30 km/h. The vehicle stores and maintains the speed specified using the controls on the steering wheel.

Do not use cruise control Do not use the system if unfavorable con

ditions make it impossible to drive at a constant speed, for instance: On curvy roads. In heavy traffic. On slippery roads, in fog, snow or rain, or

on a loose road surface. Otherwise, you could lose control of the vehicle and cause an accident.

Controls

At a glance

1 Maintaining, storing, and increasing the speed

2 Activating/deactivating cruise control 3 Maintaining, storing, and reducing the

speed 4 Resuming cruise control

Switching on Press button 2.

The indicator lamp lights up in the speedometer. Cruise control is ready to operate and can be activated.

Switching off Press button 2. When activated: press twice. When interrupted: press once. The displays go out. The stored target speed is cleared.

Interrupting Press button 2. The system is interrupted automatically if The brakes are applied. The clutch pedal is depressed.

Seite 84

Controls Driving comfort

84 Online Edition for Part no. 01 40 2 911 521 - VI/13

The transmission position D is disengaged. DSC intervenes.

Maintaining, storing the current speed Press button 1 or button 3. The current speed is maintained and stored. It is displayed briefly in the tachometer. On downhill gradients, it may prove impossible to maintain the set speed if the engine braking power is insufficient. On uphill gradients, it may prove impossible to maintain the set speed if the engine power output is insufficient.

Increasing speed Press button 1 repeatedly until the desired

speed is reached. Each time the button is pressed, the speed increases by approx. 1 mph/1 km/h.

Press and hold button 1 until the desired speed is reached. The vehicle accelerates without pressure on the accelerator pedal. After the button is released, the achieved speed is maintained and stored.

Decreasing speed Press button 3 repeatedly or hold it until the desired speed is reached. The functions are the same those when the speed is increased, only that the speed is re duced.

Resuming a speed stored beforehand Press button 4. The last stored speed is resumed and main tained. The stored speed is cleared when the ignition is switched off.

Display in the tachometer

The selected speed is displayed briefly.

If the display --- mph or --- km/h appears briefly, conditions may not be adequate to op erate the system.

For better control The indicator lamp lights up in the speedometer. Cruise control is ready to operate and can be activated.

Malfunction The warning lamp in the tachometer lights up. The system is malfunctioning or has failed.

Park Distance Control PDC The concept PDC provides support when parking in reverse. Signal tones indicate that the vehicle is ap proaching an object behind it. Measurements are made by four ultrasound sensors in the bumpers. The range of these sensors is approx. 6 ft/2 m. An acoustic warning is first given: By the two corner sensors at ap

prox. 24 in/60 cm. By the rear middle sensors at approx.

5 ft/1.50 m.

Seite 85

Driving comfort Controls

85Online Edition for Part no. 01 40 2 911 521 - VI/13

Avoid driving quickly with PDC PDC is a parking aid that can display ob

jects when the vehicle approaches them slowly, as is the case during parking maneuvers. Avoid driving toward an object quickly as the system may then be too late in issuing a warning for technical reasons.

Automatic operation The system is activated after approx. one sec ond when reverse gear or selector lever posi tion R is engaged while the engine is running or the ignition is switched on. Await this short pe riod before setting the vehicle into motion.

Signal tones The closer the vehicle is to the object, the shorter the intervals become. If the distance to a detected object is less than approx. 12 in/30 cm, a continuous tone is sounded. If the distance remains constant, for example when driving parallel to a wall, the signal tone is stopped after approx. 3 seconds.

Volume The signal tone volume can be adjusted. Radio MINI Boost CD, refer to page 124.

System limits Check the traffic situation as well PDC cannot serve as a substitute for the

driver's personal judgment of the traffic situa tion. Check the traffic situation around the ve hicle with your own eyes. Otherwise, an acci dent could result from road users or objects located outside of the PDC detection range. Loud noises from outside and inside the vehicle may prevent you from hearing the PDC's signal tone.

Malfunction The warning lamp lights up. PDC is mal functioning or has failed. Have the sys tem checked.

To ensure full functionality of the sensors, keep the sensors clean and free of ice. When using high-pressure washers, do not spray the sen sors for long periods and maintain a distance of at least 12 in/30 cm.

Seite 86

Controls Driving comfort

86 Online Edition for Part no. 01 40 2 911 521 - VI/13

Climate Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also

describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys tems.

Air conditioning

1 Air volume 2 Cooling function 3 Recirculated air mode 4 Temperature

5 Rear window defroster 6 Vent settings 7 Windshield heating

Air volume Vary the air volume. The higher the rate, the more effective the heating or cooling will be. The air flow rate may be reduced or the blower may be switched

off entirely to save on battery power.

Switching the system on/off Turn the rotary switch for the air volume to 0. The blower and air conditioner are completely switched off and the air supply is cut off. Set any air volume to switch on the air condi tioning.

Seite 87

Climate Controls

87Online Edition for Part no. 01 40 2 911 521 - VI/13

Cooling function The passenger compartment can only be cooled with the engine running. The cooling function cools and dehumidifies the incoming air

before reheating it as required, according to the temperature setting. The cooling function helps to prevent conden sation on the windows or to remove it quickly.

Depending on the weather, the windshield may fog up briefly when the engine is started. To cool the air faster and more intensively when external temperatures are high, switch on the recirculated air mode.

Recirculated air mode If the air outside the car has an unpleasant odor or contains pol lutants, shut off the supply to the interior of the car temporarily. The system then recirculates the

air currently within the vehicle.

Should the windows fog up in the recirculated- air mode, press the AUTO button or switch off the recirculated-air mode and increase the air volume if necessary. Make sure that air can flow onto the windshield. Recirculated air mode is automatically deacti vated at low external temperatures.

Only use recirculated air mode for a lim ited period

The recirculated air mode should not be used continuously for lengthy periods; otherwise, the quality of the air inside the car will gradually deteriorate.

Temperature Turn upward, red, to raise the temperature. Turn downward, blue, to lower the temperature.

Rear window defroster The rear window defroster switches off automatically after a certain period of time. The rear window defroster power may be lowered or even

switched off entirely to save on battery power.

Vent settings Direct the flow of air to the win dows , to the upper body area , or to the footwell . Intermediate positions are possi ble.

Windshield heating The windshield heating switches off automatically after some time. The windshield heating may be reduced or even switched off en

tirely to save on battery power.

Defrosting and defogging windows 1. Set the maximum air volume. 2. Air distribution in position .

By switching on the cooling function, the windows are defogged more rapidly.

3. Set the highest temperature, red. 4. Deactivate recirculated air mode. 5. Switch on the windshield heating if neces

sary. 6. Switch on the rear window defroster if nec

essary.

Seite 88

Controls Climate

88 Online Edition for Part no. 01 40 2 911 521 - VI/13

Microfilter The microfilter traps dust and pollen. The mi crofilter is changed by the service center during routine maintenance work.

Microfilter/activated-charcoal filter The microfilter traps dust and pollen. The acti vated-charcoal filter provides additional protec

tion by filtering gaseous pollutants from the outside air. The service center replaces this combined filter during routine maintenance.

Automatic climate control

1 Air volume, manual 2 AUTO program 3 Recirculated air mode 4 Maximum cooling 5 Manual air distribution 6 Temperature

7 Defrosting windows and removing conden sation

8 Cooling function 9 Rear window defroster 10 Windshield heating

Comfortable interior climate The AUTO program offers the optimum air dis tribution and air volume for virtually all condi tions, refer to AUTO program below. Select a comfortable interior temperature only.

The following sections contain more detailed information on the available setting options. Most of these settings are stored for the remote control in use, Personal Profile settings, refer to page 23.

Seite 89

Climate Controls

89Online Edition for Part no. 01 40 2 911 521 - VI/13

Air volume, manual Press the button to reduce the air volume. Press the + button to increase the air volume. The automatic mode for the air volume can be switched on

again using the AUTO button.

The air flow rate may be reduced or the blower may be switched off entirely to save on battery power. The display remains the same.

Switching the system on/off Reduce the air volume by pressing the button until the system is switched off. All displays go out. Press the AUTO button to switch the automatic climate control back on.

AUTO program The AUTO program automati cally adjusts the air distribution to the windshield and side win dows, toward the upper body area, and into the footwell. The

air volume and your specifications for the tem perature are adjusted to outside influences due to the seasons, e. g., solar radiation. The cooling function is switched on automati cally with the AUTO program. The program is switched off if the air distribu tion is manually adjusted or the button is pressed again.

Recirculated air mode If the air outside the car has an unpleasant odor or contains pol lutants, shut off the supply to the interior of the car temporarily. The system then recirculates the

air currently within the vehicle.

Should the windows fog up in the recirculated- air mode, press the AUTO button or switch off

the recirculated-air mode and increase the air volume if necessary. Make sure that air can flow onto the windshield. Recirculated air mode is automatically deacti vated at low external temperatures.

Only use recirculated air mode for a lim ited period

The recirculated air mode should not be used continuously for lengthy periods; otherwise, the quality of the air inside the car will gradually deteriorate.

Maximum cooling Automatic climate control switches to the lowest tempera ture, a high air volume, and re circulated air mode. For maximum cooling, open the

vents for the upper body area.

The air is cooled as quickly as possible: At an external temperature above

32 /0 . When the engine is running.

Manual air distribution The flow of air is directed, as se lected, to the windows, to the upper body area, or to the foot well. The automatic mode for the air

distribution can be switched back on using the AUTO button.

Temperature Set the desired temperature in dividually. The automatic climate control achieves this temperature as quickly as possible regardless of

the season, using maximum cooling or heating power if necessary, and then maintains it.

Seite 90

Controls Climate

90 Online Edition for Part no. 01 40 2 911 521 - VI/13

When switching between different temperature settings in rapid succession, the automatic cli mate control does not have sufficient time to adjust the set temperature.

Rear window defroster The rear window defroster switches off automatically after a certain period of time.

Depending on the vehicle equipment, upper wires are used as an antenna and are not part of the rear window defroster.

Defrosting and defogging windows Quickly removes ice and con densation from the windshield and front side windows. For this purpose, also switch on the cool ing function.

The windshield heating switches on automati cally.

Windshield heating The windshield heating switches off automatically after some time.

Cooling function The cooling function cools and dehumidifies the incoming air before reheating it as required, according to the temperature setting. The passenger compart

ment can only be cooled with the engine run ning.

The cooling function helps to prevent conden sation on the windows or to remove it quickly.

Depending on the weather, the windshield may fog up briefly when the engine is started. Recir culated air mode is switched on automatically if necessary. The cooling function is switched on automati cally when the AUTO button is pressed.

Microfilter/activated-charcoal filter The microfilter traps dust and pollen. The acti vated-charcoal filter provides additional protec tion by filtering gaseous pollutants from the outside air. The service center replaces this combined filter during routine maintenance.

Ventilation

1 Knob for continuous opening and closing 2 Nozzle for direction of air flow

Opening/closing Turn the knob.

Direction of air flow Pivot the entire nozzle.

Seite 91

Climate Controls

91Online Edition for Part no. 01 40 2 911 521 - VI/13

Interior equipment Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys tems.

Universal garage door opener The concept The universal garage door opener can be used to operate up to 3 functions in remote-control led systems, such as garage door drives or lighting systems. The universal garage door opener replaces up to 3 different hand-held transmitters. To operate it, the buttons on the interior rearview mirror must be programmed for the desired functions. The hand-held trans mitter for the system is needed for the pro gramming procedure.

During programming During programming and before activat

ing a device using the Universal Garage Door Opener, ensure that there are no people, ani mals, or objects in the range of movement of the remote-controlled device; otherwise, there is a risk of injury or damage. Also follow the safety instructions of the hand- held transmitter.

Before selling the vehicle, delete the stored functions for security reasons.

Compatibility If this symbol is printed on the packag ing or in the operating instructions of the system being operated, the system

is generally compatible with the universal ga rage door opener. If you have any questions, please contact: Your service center. www.homelink.com on the Internet. HomeLink is a registered trademark of Johnson Controls, Inc.

Controls on the interior rearview mirror

1 LED 2 Buttons 3 Hand-held transmitter, required for pro

gramming.

Programming

General information 1. Switch on the ignition. 2. Initial setup:

Press the right and left buttons on the inte rior rearview mirror simultaneously for ap prox. 20 seconds until the LED on the inte rior rearview mirror begins to flash. All programmed settings of the buttons on the interior rearview mirror are deleted.

Seite 92

Controls Interior equipment

92 Online Edition for Part no. 01 40 2 911 521 - VI/13

3. Hold the hand-held transmitter of the sys tem to be operated a distance of approx. 1 to 3 in/2.5 to 8 cm away from the buttons on the interior rearview mirror. The re quired distance depends on the particular hand-held transmitter.

4. Press the button of the desired function on the hand-held transmitter and the button being programmed on the interior rearview mirror simultaneously and hold. The LED on the interior rearview mirror flashes slowly at first.

5. When the LED flashes more rapidly, release both buttons. Rapid flashing indicates that the button on the interior rearview mirror has been programmed. If the LED does not flash faster after 60 sec onds, change the distance between the in terior rearview mirror and the hand-held transmitter and repeat the step. Multiple trials at different distances may be neces sary. Wait at least 15 seconds between tri als.

6. To program additional functions on other buttons, repeat steps 3 to 5.

The systems can be operated with the buttons on the interior rearview mirror.

Special characteristics of alternating- code radio systems If the system cannot be operated after re peated programming, check whether the sys tem to be operated uses an alternating-code system. Read the operating instructions of the system or press and hold the programmed button on the interior rearview mirror. If the LED on the interior rearview mirror flashes rapidly at first and then lights up continuously for 2 seconds, the system is equipped with an alternating- code system. This flashing LED pattern repeats itself for approx. 20 seconds.

In systems with an alternating-code system, the universal garage door opener and the system must be additionally synchronized. Please obtain additional information on syn chronization in the operating instructions of the system being set up. The systems will be easier to synchronize with the aid of a second person. Synchronization:

1. Park the vehicle within range of the re mote-controlled system.

2. Program the corresponding button on the interior rearview mirror as described.

3. Identify and press the synchronization but ton on the system being set up. You have approx. 30 seconds for the next step.

4. Press and hold the button on the interior rearview mirror for approx. 3 seconds and then release it. Repeat this step up to three times if necessary to complete the synchro nization procedure. When synchronization is completed, the programmed function is executed.

Reprogramming individual buttons 1. Switch on the ignition. 2. Hold the hand-held transmitter at a dis

tance of approx. 1 to 3 in/2.5 to 8 cm from the memory buttons. The required distance depends on the par ticular hand-held transmitter.

3. Press the memory button of the universal garage door opener.

4. If the LED flashes slowly after approx. 20 seconds, press the transmit button on the hand-held transmitter.

5. Release both buttons when the LED flashes rapidly. If the LED does not flash rapidly after ap prox. 60 seconds, change the distance and repeat the step.

Seite 93

Interior equipment Controls

93Online Edition for Part no. 01 40 2 911 521 - VI/13

Canada: if the LED does not flash rapidly af ter approx. 60 seconds, change the dis tance and repeat the step. If programming was aborted by the hand-held transmitter, hold down the memory button and press and release the button on the hand-held transmitter several times for 2 seconds.

Controls Prior to operation Before operating a unit with the Universal

Garage Door Opener, ensure that there are no people, animals, or objects in the range of movement of the system; otherwise, there is a risk of injury or damage. Also follow the safety instructions of the hand- held transmitter.

The system, such as the garage door, can be operated using the button on the interior rear view mirror with the engine running or the igni tion switched on. When you are within the re ception range of the system, press and hold the button until the function is initiated. The LED on the interior rearview mirror lights up continu ously while the radio signal is being transmit ted.

Deleting stored functions Press the right and left buttons on the interior rearview mirror simultaneously for approx. 20 seconds until the LED flashes rapidly. All stored functions are deleted. The functions can not be deleted individually.

Digital compass

1 Adjustment button on the back of the mir ror

2 Display

The display shows the main or secondary com pass direction in which the vehicle is traveling.

Operating concept Various functions can be called up by pressing the adjustment button with a pointed object such as a pen. The following adjustment op tions are displayed one after the other, de pending on how long the adjustment button is pressed: Press briefly: switch the display on/off. 3 to 6 seconds: set the compass zone. 6 to 9 seconds: calibrate the compass. 9 to 12 seconds: set left-hand/right hand

steering. 12 to 15 seconds: set the language.

Setting compass zones Set the compass zone corresponding to the ve hicle's geographic location so that the compass can function correctly; refer to the world map with compass zones.

Seite 94

Controls Interior equipment

94 Online Edition for Part no. 01 40 2 911 521 - VI/13

Press the adjustment button for 34 seconds. The number of the compass zone set is shown in the display. To change the zone setting, briefly press the adjustment button repeatedly until the display shows the number of the compass zone corre sponding to the current location. The compass is operational again after approx. 10 seconds.

Calibrating the digital compass The digital compass must be calibrated in the following situations: An incorrect compass direction is shown. The cardinal direction displayed does not

change even if the direction of travel changes.

Not all compass directions are shown.

Procedure 1. Make sure that there are no large metal ob

jects or overhead power lines in the vicinity of the vehicle and that there is enough space to drive in a circle.

2. Set the currently valid compass zone. 3. Press the adjustment button for 67 sec

onds to call up C. Then drive at least one full circle at a maximum speed of 4 mph/7 km/h. When the system is cali brated, the C is replaced by the compass di rections.

Right-hand/left-hand steering The digital compass is set for right-hand or left- hand steering at the factory.

Setting the language Press the adjustment button for 1213 seconds. Briefly press the adjustment button again to switch between English "E" and German "O". The setting is automatically saved after approx. 10 seconds.

Seite 95

Interior equipment Controls

95Online Edition for Part no. 01 40 2 911 521 - VI/13

Cupholders and ashtray/ lighter

Cupholders Two cupholders are located in the center con sole in the front. MINI Countryman: two additional cupholders are located at the end of the center console in the rear. Additional cupholders can be installed on the center rail.

MINI Paceman: additional cupholders are lo cated in the console between the rear seats.

Depending on the equipment, additional cu pholders can be installed on the center rail.

Shatter-proof containers and no hot drinks

Use light and shatter-proof containers and do not transport hot drinks. Otherwise, there is the increased danger of injury in an accident.

Unsuitable containers Do not forcefully push unsuitable contain

ers into the cupholders. This may result in dam age.

Ashtray The ashtray is located in one of the cupholders in the center console at the front.

Emptying Take out the entire ashtray, arrow. When installing, ensure that the ashtray is in serted in the cupholder with the adapter.

Lighter

With the engine running or the ignition switched on, press in the cigarette lighter. The lighter can be removed as soon as it pops back out.

Danger of burns Only hold the hot lighter by its head; oth

erwise, there is the danger of getting burned. Switch off the ignition and take the remote control with you when leaving the vehicle so that children cannot use the lighter and burn themselves.

Seite 96

Controls Interior equipment

96 Online Edition for Part no. 01 40 2 911 521 - VI/13

Connecting electrical de vices The lighter socket can be used as a socket for electrical equipment while the engine is run ning or when the ignition is switched on. The total load of all sockets must not exceed 140 watts at 12 volt. Avoid damaging the sockets by attempting to insert plugs of unsuitable shape or size.

Do not connect the charger to the socket Do not connect the battery charger to the

socket installed in the vehicle at the factory as this could damage the battery.

Replace the cover after use Replace the lighter or socket cover after

use; otherwise, objects that fall into the lighter socket or power socket could cause a short cir cuit.

Socket in the center console Remove the cover or lighter, refer to page 96, from the socket.

Socket in the rear

MINI Countryman

Take out the cover.

MINI Paceman

Take out the cover.

Socket in the cargo area

MINI Countryman

Take out the cover.

MINI Paceman

Take out the cover.

Seite 97

Interior equipment Controls

97Online Edition for Part no. 01 40 2 911 521 - VI/13

Cargo area Cargo cover

Do not place objects on the covers Do not place objects on the cover; if you

do so, they may pose a danger to vehicle occu pants during braking or evasive maneuvers or damage the cover.

When the tailgate is opened, the cargo cover is raised. To load bulky luggage, the cover can be re moved.

1. Detach the securing straps from the tail gate.

2. Lift the cover slightly, arrow 1, and pull it back and out of the bracket, arrow 2.

MINI Countryman:

MINI Paceman:

MINI Countryman: rear seat backrests Danger of pinching Before folding down the rear seat back

rests, ensure that path of movement of the backrests is clear. Especially when the middle section is folded down, ensure that no one is located in or reaches into the path of move ment of the rear seat backrests. Otherwise, in juries or damage may result.

Observe the instructions concerning the safety belt

Observe the instructions concerning the safety belt, refer to page 38. Otherwise, personal pro tection may be compromised.

The rear seat backrest is divided at a ratio of 40-20-40. When the outer rear seat backrests are folded down, it is not permissible for a person to travel on the center seat. Remove the third head restraint, refer to page 41, if necessary. Open the center safety belt and insert it in the belt holder on the headliner, refer to page 39. Enlarge the cargo area by adjusting the rear seat backrests to a more upright position. The backrests can be adjusted to 10 different positions between the comfort and transport positions and they can be folded down. In the comfort position, the backrests are tilted back to the greatest possible angle and in the transport position they are nearly vertical.

Seite 98

Controls Interior equipment

98 Online Edition for Part no. 01 40 2 911 521 - VI/13

Before beginning with the mounting of a child restraint fixing system, note the instructions, refer to page 44.

1. Hold the top of the backrest, for example the head restraint, and pull on the loop, ar row.

2. Engage the backrest in the desired position or fold it down.

Folding the backrests back up Locking the backrest When folding back, ensure that the locks

engage properly; otherwise, cargo could be catapulted forward into the passenger com partment during braking maneuvers and swerving, endangering the occupants.

No child restraint fixing systems Do not mount child restraint fixing sys

tems in the rear when the rear seat backrests are adjusted to a more vertical position; other wise, the protection provided by these systems may be reduced.

When the backrests are folded back up, they engage in the transport position. To set the desired backrest inclination or com fort position, hold the backrest, pull the loop forward, and adjust the backrest.

MINI Paceman: rear seat backrests Danger of pinching Before folding down the rear seat back

rests, ensure that path of movement of the backrests is clear; otherwise, injuries or damage may result.

1. Pull on the respective loop, arrow. The backrest is unlocked.

2. Fold the backrest forward.

Folding the backrests back up Hold the top of the backrest, for example the head restraint, and fold it back.

Locking the backrest When folding back, ensure that the locks

engage properly; otherwise, cargo could be catapulted forward into the passenger com partment during braking maneuvers and swerving, endangering the occupants.

Flat loading floor Maximum load Do not exceed the maximum load of

330 lbs, 150 kg, on the loading floor; otherwise, damage may result.

Access to storage area A storage area for items like the partition net is found under the loading floor.

1. Reach into the recess, arrow 1, on the rear edge of the loading floor.

Seite 99

Interior equipment Controls

99Online Edition for Part no. 01 40 2 911 521 - VI/13

2. Lift the loading floor at the rear, arrow 1, and fold it forward, arrow 2.

MINI Countryman:

MINI Paceman:

Before closing the tailgate, lower the loading floor back onto the cargo area floor.

Removing The loading floor can be removed if necessary.

1. Fold up the loading floor. 2. Pull it back slightly and out of the holders. 3. Then remove it upward. The folded loading floor can be stored in the cargo area.

MINI Countryman: partition net Firmly attach the partition net Make sure that the partition net is firmly

attached; otherwise, injuries may result.

Before installing 1. Remove the pouch with the partition net

from the storage compartment under the loading floor in the cargo area.

2. Take the partition net out of the pouch, un roll it, and unfold it. After use, fold and roll up the partition net in the same manner and place it in the pouch so that it can be stowed back under the cargo floor panel. Ensure that hooks and tensioning buckles do not rest on the rod elements.

3. Unfold the partition net to the point where the rod elements engage.

Installation behind the front seats

1. Take out the cargo cover if necessary. 2. Fold down the rear seat backrests, refer to

Enlarging the cargo area. 3. Insert the retaining pins of the partition net

all the way into the front holders in the headliner, arrow 1, and push forward.

4. Attach the hooks, arrow 2, at the bottom of the retaining straps on both sides to the eyelets on the vehicle floor.

5. Lash the partition net tightly. To do this, tighten the retaining straps using the ten sioning buckles.

Removing To remove and stow the partition net, proceed in reverse order.

Seite 100

Controls Interior equipment

100 Online Edition for Part no. 01 40 2 911 521 - VI/13

To fold up, press the release button, arrow.

MINI Countryman: multi-function hook

Hooks designed for hanging shopping bags and totes, for example, are located on the left and right sides of the cargo cover support, arrow.

Do not hang heavy items from the hooks Only hang light bags or suitable objects

from the holders. Otherwise, there is a danger of objects flying about during braking and eva sive maneuvers. Only transport heavy luggage in the trunk if it has been appropriately secured.

Seite 101

Interior equipment Controls

101Online Edition for Part no. 01 40 2 911 521 - VI/13

Storage compartments Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys tems.

Notes No loose objects in the passenger com partment

Do not stow any objects in the passenger com partment without securing them; otherwise, they may present a danger to occupants for in stance during braking and avoidance maneu vers.

No non-slip mats on the dashboard Do not use non-slip materials, such as

non-slip mats, on the dashboard, or it could be damaged by the substances in the materials.

Storage compartments Interior Glove compartment, refer to page 102. Center armrest, refer to page 103. Center rail, refer to page 104. Compartments in the center console. Compartments in the doors. Pockets on the back of the front seat back

rests. Cupholder, refer to page 96. Clothes hooks, refer to page 105.

Cargo area Lashing eyes, refer to page 115. Storage compartment under the flat load

ing floor, refer to page 99. Multi-function hook on the cargo cover

support, refer to page 101.

Glove compartment Opening

Pull the handle to open the lid. The light in the glove compartment switches on.

Closing Fold up the cover.

Close the glove compartment again im mediately

Close the glove compartment immediately after use while driving; otherwise, injury may occur during accidents.

Ventilation Depending on the vehicle's equipment, the glove compartment can be ventilated and, if the cooling function is switched on, cooled.

Seite 102

Controls Storage compartments

102 Online Edition for Part no. 01 40 2 911 521 - VI/13

Opening

Turn the switch in the direction of the arrow.

Closing Move the switch to the vertical position by turning it in the opposite direction of the arrow. Depending on the temperature setting of the air conditioning or automatic climate control, high temperatures may occur in the glove com partment.

Center armrest The center armrest between the front seats contains a storage compartment or a cover for the snap-in adapter, refer to page 143, de pending on the equipment. The center armrest between the rear seats con tains a storage compartment. Do not position tall accessory parts directly on the center rail of the center armrest; otherwise, they may be damaged when the center arm rest is opened or closed.

Center armrest front

Opening Press the button, arrow, and pull up the lid.

MINI Paceman: center armrest, rear

Removing The rear center armrest can be removed to en large the loading area.

1. Turn the handwheel counterclockwise all the way to open it, arrow 1.

2. Push the center armrest back slightly in the base plate, arrow 2.

3. Lift the center armrest at the front and pivot it out.

Seite 103

Storage compartments Controls

103Online Edition for Part no. 01 40 2 911 521 - VI/13

Installing 1. Insert the center armrest into the rear re

cess of the base plate, arrow 1. 2. Push it back and pivot it down at the front,

arrow 2.

3. Push the center armrest forward in the base plate.

4. Tighten the handwheel by turning it clock wise.

Ensure that the center armrest engages prop erly when installed; otherwise, it could become damaged during braking maneuvers, for exam ple.

Center rail Various accessory parts can be mounted on the center rail and moved to different positions. Do not use accessory parts in the area of the handbrake; otherwise, they may become dam aged when the handbrake lever is activated.

Smartphone cradle The upper part of the smartphone cradle can be rotated by 360. When installing it at the front of the rail, ensure that it is surrounded by adequate clearance, such as toward the seat; otherwise, damage may result when it is rotated.

1. Pull up the lever 1 to unlock the holders.

2. Insert the smartphone cradle into the cen ter rail with the holders 2 first.

3. To fix, push the lever 1 downward. Ensure that the lever is properly engaged.

When connecting a smartphone to the USB au dio interface, refer to page 131, pass the con nection cable under the smartphone cradle. In addition, the connection cable can be at tached inside the rail.

1. Twist the rail segment, arrow 1, to remove it.

2. Insert the connection cable centrally into the recess, arrow 2.

3. Fix the rail segment in the rail.

Base plate Various accessory parts such as cupholders, eyeglass holders, and mobile phone cradles can be mounted on the base plate.

Inserting the base plate The lever 3 can be engaged in three positions.

Seite 104

Controls Storage compartments

104 Online Edition for Part no. 01 40 2 911 521 - VI/13

0 Setting 1 Adjusting the position on the rail 2 Inserting the base plate

To insert, move the lever to position 2.

Adjusting the position and fixing 1. Push lever 3 into position 1. 2. Adjust the position of the base plate. 3. Push lever 3 downward into position 0.

Do not apply excessive pressure to the lever.

The base plate is fixed. Fix the base plate Fix the base plate before driving away;

otherwise, injuries may result during an acci dent.

An example: eyeglass holder Attach the eyeglass holder and adjust the posi tion.

Mounting the eyeglass holder 1. If necessary, fix the base plate, refer to Ad

justing the position and fixing. 2. Pull up lever 6 to unlock the holders.

3. First engage the eyeglass holder in the front holders 4 and then in the rear hold ers 5.

Ensure that lever 6 is across from holder 4.

Clothes hooks Clothes hooks are located on the grab handles in the rear.

Do not obstruct view When suspending clothing from the

hooks, ensure that it will not obstruct the driv er's vision.

No heavy objects Do not hang heavy objects from the

hooks; otherwise, they may present a danger to passengers during braking and evasive ma neuvers.

Seite 105

Storage compartments Controls

105Online Edition for Part no. 01 40 2 911 521 - VI/13

Connection for an exter nal audio device

This can be used to connect an external audio device, such as a CD or MP3 player.

Radio MINI Boost CD, refer to page 130.

Seite 106

Controls Storage compartments

106 Online Edition for Part no. 01 40 2 911 521 - VI/13

Seite 107

Storage compartments Controls

107Online Edition for Part no. 01 40 2 911 521 - VI/13

DRIVE ME.

Online Edition for Part no. 01 40 2 911 521 - VI/13

At a glance

Controls

Driving tips

Entertainment

Communication

Mobility

Reference

Online Edition for Part no. 01 40 2 911 521 - VI/13

Things to remember when driving Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys tems.

Breaking-in period General information Moving parts need to be broken in to adjust to each other. The following instructions will help achieve a long vehicle life and good economy.

Engine and differential Always obey all official speed limits.

Up to 1,200 miles/2,000 km Drive at various engine and vehicle speeds, but do not exceed: For a gasoline engine, 4,500 rpm and

100 mph/160 km/h. Avoid full-throttle operation and use of the transmission's kickdown mode for the initial miles.

From 1,200 miles/2,000 km The engine and vehicle speed can gradually be increased.

Tires Due to technical factors associated with their manufacture, tires do not achieve their full trac

tion potential until after an initial breaking-in period. Drive conservatively for the first 200 miles/300 km.

Brake system Brakes require an initial break-in period of ap prox. 300 miles/500 km to achieve optimized contact and wear patterns between brake pads and discs. Drive cautiously during this break-in period.

Clutch The clutch requires an initial break-in period of approx. 300 miles/500 km to function at an op timal level. During this break-in period, engage the clutch gently.

Following part replacement The same breaking in procedures should be ob served if any of the components mentioned above have to be renewed in the course of the vehicle's operating life.

General driving notes Ground clearance

Ensure adequate ground clearance Ensure adequate ground clearance, e.g.,

when driving into underground garages, when driving over curbs, or when driving in winter; otherwise, damage may occur to the vehicle.

Seite 110

Driving tips Things to remember when driving

110 Online Edition for Part no. 01 40 2 911 521 - VI/13

Closing the tailgate Drive with the tailgate closed Only drive with the tailgate closed; other

wise, passengers and other road users may be endangered or the vehicle may be damaged if an accident occurs or during braking or swerv ing. In addition, exhaust fumes may enter the passenger compartment.

If, despite this, the vehicle must be driven with the tailgate open: Drive moderately. Close all windows and the glass sunroof. Switch off recirculated air mode and greatly

increase the blower speed.

Hot exhaust system Hot exhaust system High temperatures are generated in the

exhaust system. Do not remove the heat shields installed and never apply undercoating to them. Make sure that flammable materials, e. g. hay, leaves, grass, etc. do not come in contact with the hot exhaust system during driving, while in idle po sition mode, or when parked. Such contact could lead to a fire, and with it the risk of seri ous personal injury as well as property damage. Do not touch hot exhaust pipes; otherwise, there is the danger of getting burned.

Mobile communication devices in the vehicle

Mobile communication devices in the ve hicle

It is not recommended to use mobile phones, such as mobile phones without a direct con nection to an external aerial in the vehicle's passenger compartment. Otherwise, the vehi cle electronics and mobile communication de vices can interfere with each other. In addition, there is no assurance that the radiation gener

ated during transmission will be discharged from the vehicle interior.

Hydroplaning On wet or slushy roads, a wedge of water can form between the tires and road surface. This phenomenon is referred to as hydroplan ing. It is characterized by a partial or complete loss of contact between the tires and the road surface, ultimately undermining your ability to steer and brake the vehicle.

Hydroplaning When driving on wet or slushy roads, re

duce your speed to prevent hydroplaning.

The risk of hydroplaning increases as the tire tread depth decreases. Minimum tread depth, refer to page 158.

Driving through water Drive though calm water only if it is not deeper than 12 inches/30 cm and at this height, no faster than walking speed, up to 6 mph/10 km/h.

Using the handbrake on inclines Using the handbrake On inclines, do not hold the vehicle sta

tionary with a slipping clutch for extended pe riod; use the handbrake instead. Otherwise, the clutch will be subject to increased wear.

Support from the hill drive-off assistant, refer to page 83.

Braking safely The vehicle is equipped with ABS as a standard feature. Applying the brakes fully is the most effective way of braking in situations when this is neces sary. The vehicle maintains steering responsiveness. You can still avoid any obstacles with a mini mum of steering effort.

Seite 111

Things to remember when driving Driving tips

111Online Edition for Part no. 01 40 2 911 521 - VI/13

Pulsation of the brake pedal and sounds from the hydraulic circuits indicate that ABS is in its active mode.

Do not let your foot rest on the brake pedal

Do not drive with your foot resting on the brake pedal. Even light but consistent pedal pressure can lead to high temperatures, brake wear and possibly even brake failure.

Objects in the area around the pedals No objects in the area around the pedals Keep floor mats, carpets, and any other

objects out of the area of motion of the pedals; otherwise, the function of the pedals could be impeded while driving Do not place additional floor mats over existing mats or other objects. Only use floor mats that have been approved for the vehicle and can be properly fixed in place. Ensure that the floor mats are securely fastened again when they are returned after being re moved, such as for cleaning.

Driving in wet conditions When roads are wet or there is heavy rain, briefly exert gentle pressure on the brake pedal every few miles. Ensure that this action does not endanger other road users. The heat generated in this process helps dry the brake discs and pads. In this way braking efficiency will be available when you need it.

Hills Drive long or steep downhill gradients in the gear in which the least braking is required. Oth erwise, the brake system may overheat, result ing in a reduction in the brake system effi ciency.

You can increase the engine's braking effect by shifting down, going all the way to first gear, if necessary. Downshifting in manual mode of the automatic transmission, refer to page 57.

Avoid load on the brakes Avoid placing excessive load on the brake

system. Light but consistent brake pressure can lead to high temperatures, brake wear and possibly even brake failure.

Do not drive in neutral Never drive with the transmission in neu

tral, with the engine switched off or with the clutch depressed; otherwise, you will have nei ther the braking action of the engine or nor its power assistance when braking or steering.

Brake disc corrosion Corrosion on the brake discs and contamina tion on the brake pads are furthered by: Low mileage. Extended periods when the vehicle is not

used at all. Infrequent use of the brakes. Corrosion occurs when the minimum pressure that must be exerted by the pads during brake applications to clean the discs is not reached. Should corrosion form on the brake discs, the brakes will tend to respond with a pulsating ef fect that generally cannot be corrected.

When the vehicle is parked When using the automatic climate control, con densation water develops that exits under neath the vehicle. Therefore, traces of condensed water under the vehicle are normal. After the engine is switched off, the coolant pump may continue running for some time in the MINI Cooper S. This causes noises in the en gine compartment.

Seite 112

Driving tips Things to remember when driving

112 Online Edition for Part no. 01 40 2 911 521 - VI/13

Driving on poor roads Your MINI with ALL4 all-wheel drive feels com fortable on all streets and roads. It combines an all-wheel drive system with the advantages of a normal passenger car.

Do not drive on unpaved terrain Do not drive on unpaved terrain, as oth

erwise the vehicle may be damaged.

For your own safety and the safety of passen gers and the vehicle, adhere to the following points: Familiarize yourself with the vehicle before

driving; never take risks. Adjust speeds according to road conditions.

The steeper and rougher the road surface is, the lower the speed should be.

When driving on steep uphill and downhill grades: the engine oil and coolant should be filled nearly to the MAX mark.

Watch for stones, holes, and other obsta cles and drive around these where possible.

On bumps and rough roads, avoid contact between the vehicle body and the ground. The maximum ground clearance is 6 in ches/15 cm and may vary with the loaded cargo.

When driving through water, do not exceed the maximum water height of 12 in ches/30 cm and drive at walking speed.

After driving through water, press on the brake pedal several times at low speeds to dry the brakes.

Depending on the prevailing terrain, acti vate Dynamic Traction Control DTC briefly, refer to page 82.

When the wheels spin, accelerate to enable the driving stability control systems to dis tribute the drive force to the individual wheels.

After driving on poor roads Adhere to the following points to ensure vehi cle safety: Remove excessive accumulations of dirt

and mud from the vehicle body. Clear mud, snow, ice, etc., from the wheels

and tires and check for damage.

Seite 113

Things to remember when driving Driving tips

113Online Edition for Part no. 01 40 2 911 521 - VI/13

Loading Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys tems.

General information Overloading the vehicle To avoid exceeding the approved carry

ing capacity of the tires, never overload the ve hicle. Overloading can lead to overheating and increases the rate at which damage develops inside the tires. This could result in a sudden loss of tire inflation pressure.

No fluids in the cargo area Make sure that fluids do not leak into the

cargo area; otherwise, the vehicle may be dam aged.

Determining the load limit

1. Locate the following statement on your ve hicles placard:

The combined weight of occupants and cargo should never exceed XXX kg or YYY lbs. Otherwise, damage to the ve hicle and unstable driving situations may result.

2. Determine the combined weight of the driver and passengers that will be riding in your vehicle.

3. Subtract the combined weight of the driver and passengers from XXX kilograms or YYY pounds.

4. The resulting figure equals the available amount of cargo and luggage load ca pacity. For example, if the YYY amount equals 1,000 lbs and there will be four 150 lbs pas sengers in your vehicle, the amount of available cargo and luggage load capacity is 400 lbs: 1,000 lbs minus 600 lbs = 400 lbs.

5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4.

6. If your vehicle will be towing a trailer, load from your trailer will be transfered to your vehicle. Consult the manual for transporting a trailer to determine how this may reduce the available cargo and luggage load ca pacity of your vehicle.

Load 4-seater:

Seite 114

Driving tips Loading

114 Online Edition for Part no. 01 40 2 911 521 - VI/13

5-seater:

The maximum load is the sum of the weight of the occupants and the cargo. The greater the weight of the occupants, the less cargo that can be transported.

Stowing cargo Very heavy cargo: when the rear seat is not

occupied, secure each of the outer safety belts in the opposite buckle.

Heavy cargo: stow as far forward and as low as possible, ideally directly behind the backrests.

Cover sharp edges and corners. Do not pile cargo higher than the top edge

of the backrests. If necessary, fold down the rear backrests

to stow cargo. Use the partition net, refer to page 100, to

protect passengers. Make sure that objects cannot penetrate the partition net.

Place protective material around any sharp- edged or pointed objects that could bump

against the rear window while the vehicle is in motion.

MINI Countryman

MINI Paceman

Securing cargo Lashing eyes in the cargo area

MINI Countryman

Seite 115

Loading Driving tips

115Online Edition for Part no. 01 40 2 911 521 - VI/13

MINI Paceman

Securing cargo Secure smaller and lighter pieces with tight

ening belts or straps. Secure larger and heavier pieces with cargo

straps. Adhere to the information included with the cargo straps.

Eight mounting eyes are available for fas tening the cargo straps. Two of them are located on the side wall of the cargo area, arrows 1, and two are lo cated on the rear wall of the cargo area, ar rows 2.

Securing cargo Stow and secure the cargo as described

above; otherwise it may present a danger to the occupants, for instance during braking and avoidance maneuvers. Do not stow any heavy and hard objects in the passenger compartment without securing them; otherwise, they may present a danger to occupants, for instance during braking and avoidance maneuvers. Never exceed either the approved gross vehicle weight or either of the approved axle loads, as excessive loads can pose a safety hazard, and may also place you in violation of traffic safety laws. Do not secure cargo using the upper LATCH mounting points, refer to page 46; otherwise, these may become damaged.

Roof-mounted luggage rack Notes A special rack system is available as an optional accessory.

Attachment Follow the installation instructions for the roof- mounted luggage rack. Ensure that adequate clearance is available for the movement of the glass sunroof.

Loading Because roof racks raise the vehicle's center of gravity when loaded, they have a major effect on vehicle handling and steering response. Therefore, note the following when loading and driving: Do not exceed the approved roof/axle

loads and the approved gross vehicle weight.

Distribute the roof load uniformly. The roof load should not be too large in

area. Always load the heaviest pieces on the bot

tom. Fasten the roof-mounted luggage securely,

for instance using lashing straps. Do not let objects project into the opening

path of the tailgate. Drive smoothly. Avoid sudden acceleration

and braking maneuvers. Take corners gen tly.

Rear luggage rack Notes A special rear rack is available as an optional accessory. It does not require a trailer hitch.

Seite 116

Driving tips Loading

116 Online Edition for Part no. 01 40 2 911 521 - VI/13

Follow the installation instructions for the rear rack.

Anchorage points MINI Countryman:

MINI Paceman:

The anchorage points are under the covers in the bumper. Push out the covers on the corresponding cut outs.

Loading When loading the vehicle, ensure that the ap proved gross vehicle weight and the axle loads are not exceeded. Adhere to the weight specifi cations in the technical data.

Seite 117

Loading Driving tips

117Online Edition for Part no. 01 40 2 911 521 - VI/13

Saving fuel Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys tems.

General information Your vehicle contains advanced technology for the reduction of fuel consumption and emis sions. Fuel consumption depends on a number of dif ferent factors. The implementation of certain measures, driving style and regular mainte nance can have an influence on fuel consump tion and on the environmental impact.

Remove unnecessary cargo Additional weight increases fuel consumption.

Remove attached parts following use Remove unneeded auxiliary mirrors, roof or rear luggage racks after use. Attached parts on the vehicle impair the aero dynamics and increase the fuel consumption.

Close both windows Open windows causes higher air resistance and thus increases fuel consumption.

Check the tire inflation pressure regularly Check and, if necessary, correct the tire infla tion pressure, refer to page 152, at least twice a month and before starting on a long trip.

Low tire inflation pressure increases rolling re sistance and thus raises fuel consumption and tire wear.

Drive away without delay Do not wait for the engine to warm-up while the vehicle remains stationary. Start driving right away, but at moderate engine speeds. This is the fastest way for the cold engine to reach its operating temperature.

Look well ahead when driving Avoid unnecessary acceleration and braking. To achieve this, maintain a suitable distance to the vehicle driving ahead of you. Driving smoothly and looking ahead reduces fuel consumption.

Avoid high engine speeds Use 1st gear to get the vehicle in motion. Be ginning with 2nd gear, accelerate rapidly. When accelerating, shift up before reaching high en gine speeds. When you reach the desired speed, shift into the highest applicable gear and drive with the engine speed as low as possible and at a con stant speed. As a rule: driving at low engine speeds lowers fuel consumption and reduces wear.

Use coasting conditions When approaching a red light, take your foot off the accelerator and coast to a halt in the highest applicable gear. On a downhill slope, take your foot off the ac celerator and coast in a suitable gear. The flow of fuel is interrupted while coasting.

Seite 118

Driving tips Saving fuel

118 Online Edition for Part no. 01 40 2 911 521 - VI/13

Switch off the engine during longer stops Switch off the engine during longer stops, e.g., at traffic lights, railroad crossings or in traffic congestion. Fuel savings are already achieved after the en gine is turned off for as little as 4 seconds.

Automatic Engine Start/Stop Function The Automatic Engine Start/Stop Function auto matically switches the engine off during a stop. If the engine is stopped and then started again, fuel consumption and emissions drop com pared to an engine that runs permanently. Stopping the engine even for just a few sec onds can result in savings. In addition, fuel consumption depends on other factors as well, such as driving style, road con ditions, maintenance, and environmental fac tors.

Switch off any functions that are not currently needed Functions such as seat heating and the rear window defroster require a lot of energy and consume additional fuel, especially in city and stop-and-go traffic. Therefore, switch off these functions if they are not actually needed.

Have maintenance carried out Have vehicles maintained regularly to achieve optimal vehicle economy and operating life. Have the maintenance carried out by the serv ice center. Please also note the MINI maintenance system, refer to page 169.

Seite 119

Saving fuel Driving tips

119Online Edition for Part no. 01 40 2 911 521 - VI/13

ROCK ME.

Online Edition for Part no. 01 40 2 911 521 - VI/13

At a glance

Controls

Driving tips

Entertainment

Communication

Mobility

Reference

Online Edition for Part no. 01 40 2 911 521 - VI/13

Radio MINI Boost CD Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also

describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys tems.

General information At a glance

1 Change the audio sources. 2 On/off, volume.

Press: switch on/off. Turn: adjust the volume.

3 Show the tone settings. 4 Function buttons for selecting the menu

items shown directly above them on the display.

5 Change the station or track.

6 Display. 7 Select the functions.

Turn: highlight the menu item on the display or set the value.

Press: select the highlighted menu item or store the settings.

8 Place/end calls. 9 Opens the main menu. 10 Manually select the frequency.

Seite 122

Entertainment Radio MINI Boost CD

122 Online Edition for Part no. 01 40 2 911 521 - VI/13

11 CD slot. 12 Eject the CD.

Representation in the Owner's Manual "" Identifies radio display texts used to select individual functions.

Menu navigation Radio and telephone functions can be opened using buttons on the radio and menus.

Opening menu items To display the menu items:

Press the button for the audio sources menu.

Press the button for the main menu.

Selecting menu items There are two ways to select a menu item on the display.

Using the right knob

To mark a menu item: turn the right knob, arrow 2.

To select a menu item: press the right knob, arrow 1.

Using the function buttons Press the left or right side of the function button under the menu item.

If only one menu item is displayed above the function button, press the middle of the button.

Symbols on the display

Symbol Meaning

Function is selected.

Function is activated.

The function is deactivated.

Leave the menu, one menu back.

Display additional menu items.

Scroll display. The list contains more than two entries.

Change to the higher level directory.

Setting values For setting numerical values or values on a scale:

1. Mark the desired menu item and press the right knob.

2. Turn the right knob to set the value. 3. Press the right knob to store the value.

Switching on/off Press the left knob. The radio selects the audio source set last: radio, satellite radio, CD, exter nal audio device, or USB audio interface.

Listening to the radio with the ignition switched off When the radio ready state or the ignition is switched off, the radio functions are available for approx. 20 minutes. To listen to the radio, switch it back on. To spare the battery, ensure that the radio is switched off when you leave the vehicle.

Seite 123

Radio MINI Boost CD Entertainment

123Online Edition for Part no. 01 40 2 911 521 - VI/13

Adjusting the volume Turn the left knob. The setting is stored for the remote control currently in use. When a call is placed using the hands-free sys tem, the audio sources are muted.

Speed-dependent volume and volumes of PDC signal tone and gong "PDC": volume of the PDC signal tone com

pared to the audio sources. "GONG": volume of the gong compared to

the audio sources. "S-VOL": speed-dependent volume control. Set the audio sources to a high volume to be able to adjust the volume of the signal tones more easily.

1. Press the button. 2. Select the symbol if necessary. 3. Select the desired volume setting. 4. Set the desired volume and press the right

knob.

Volume of external audio devices An external audio device such as an MP3 player can be connected via the AUX-IN port in the center console and the audio tracks can be played over the car's loudspeaker system. The volume of the external audio device can be adjusted to the car radio.

1. Press the button. 2. "AUX" 3. "Vol-AUX" 4. Set the desired volume and press the right

knob.

Tone settings "BASS": depth adjustment. "TREBLE": treble adjustment. "FADER": front/rear volume distribution.

"BAL": left/right volume distribution. The sound settings are set globally for all audio sources.

Setting the treble, bass, and volume distribution

1. Press the button. 2. Highlight the desired tone setting and press

the right knob. 3. Create the desired setting and press the

right knob.

Resetting the tone settings The tone settings are reset to medium values.

1. Press the button. 2. "RESET"

Time

Setting the time, date, and time format 1. Switch on the radio ready state or the igni

tion.

2. Press the button. 3. "CONFIG" 4. "TIME" 5. Select the desired category. 6. Create the settings and press the right

knob.

Setting the units of measure of the computer and the language 1. Switch on the radio ready state or the igni

tion.

2. Press the button. 3. "CONFIG" 4. "DIST": change the unit of measure for

the range.

Seite 124

Entertainment Radio MINI Boost CD

124 Online Edition for Part no. 01 40 2 911 521 - VI/13

"LANG": select the language of the dis play texts.

"CONSMP": change the unit of measure for the average fuel consumption.

"TEMP": change the unit of measure for the external temperature.

5. Highlight the desired menu item and press the button.

6. Create the desired setting.

Computer The following vehicle information can be call up via the computer: Average fuel consumption Average speed Range

Displaying information 1. Switch on the radio ready state or the igni

tion.

2. Press the button. 3. "COMP"

Average fuel consumption The average fuel consumption is calculated for the time during which the engine is running. To start calculation of the average fuel con sumption:

1. "CONSMP" 2. "RESET" The previous display is set to zero and the sys tem begins recalculating the average fuel con sumption.

Average speed The average speed is calculated for the time during which the engine is running. To start calculation of the average speed:

1. "SPEED"

2. "RESET"

Estimated range "RANGE" The display shows the estimated distance that can be still be driven on the remaining fuel, taking into consideration the driving style over the last 18 miles/30 km.

Radio Listening to the radio The radio is designed for reception in the FM and AM wavebands.

1. Switch on the radio, refer to page 123.

2. Press this button if necessary. 3. "TUNER" 4. "FM" or"AM"

Press the corresponding button repeatedly until the desired waveband is displayed. FM: FM1, FM2, FMA AM: AM, AMA

Selecting a station The setting is stored for the remote control cur rently in use.

Next station

Press the button. The next station with reception is selected.

Selecting the station manually by frequency

1. Press the button. 2. Press the respective function button to

set the desired frequency. Turn the right knob until the desired

frequency is set.

Seite 125

Radio MINI Boost CD Entertainment

125Online Edition for Part no. 01 40 2 911 521 - VI/13

Automatically updating the stations with the best reception, AUTOSTORE In the FMA and AMA memory levels, stations are automatically stored according to their re ception strength. If the AUTOSTORE function is not used, six stations can be manually stored in each of the FMA and AMA memory levels.

1. "FM" or"AM" Press the corresponding button until the following is displayed: "AUTOSTORE"

It may take several seconds for the stations to be stored and for one of these stations to be played back.

Briefly playing and selecting a station "SC" All stations with reception are played briefly. To interrupt the function and select a station: "SC"

Storing and retrieving a station

Memory locations It is possible to store up to 30 stations. FM1, FM2, AM: six stations each. FMA, AMA: the six stations with the best re

ception (automatically) or any six stations (manually).

Storing a station 1. "FM" or"AM"

Select the desired function repeatedly until the desired waveband is displayed.

2. Select the station. 3. "1" ... "6"

Press and hold the function button under the desired memory location until the sta tion is audible again after a brief interrup tion.

Retrieving a stored station 1. "FM" or"AM"

Select the desired function repeatedly until the desired waveband is displayed.

2. "1" ... "6" Press and hold the desired function button or turn the right knob until the desired sta tion is displayed.

Radio Data System, RDS RDS broadcasts additional information, such as the station name or text messages, in the FM waveband. When playing a station with multi ple frequencies, the system automatically switches to the frequency with the best recep tion, if needed. Some stations broadcast the type of program received, or PTY, via RDS. This information is displayed briefly when the station is selected, for instance NEWS. PTY can also be used to display catastrophe alerts, such as "ALARM". The alert is issued on the loudspeakers.

Switching the RDS on/off 1. "SET" 2. "RDS" When the RDS is switched off, the PTY function is switched off as well.

Switching the program type display on/off 1. "SET" 2. "PTY"

HD Radio reception Many stations broadcast both analog and digi tal signals. These stations can be received digi tally and therefore with better sound quality. A digital radio network must be available to be able to receive digital stations. License conditions

Seite 126

Entertainment Radio MINI Boost CD

126 Online Edition for Part no. 01 40 2 911 521 - VI/13

HD Radio Technology manufactured under li cense from iBiquity Digital Corporation. U.S. and Foreign Patents. HD Radio and the HD, HD Radio, and Arc logos are proprietary trade marks of iBiquity Digital Corp.

Activating/deactivating digital radio reception

1. Press the button. 2. "TUNER" 3. "SET" 4. "HD"

Displays "HD": a station is received digitally. "(HD)": a station broadcasts digital signals

but digital radio reception is switched off. In areas in which the selected station is not continuously received in digital mode, playback switches between analog and digital reception. In this case, switch off digital radio reception.

Selecting the programs of a digital station Some stations broadcast multiple programs. To select one of these programs:

1. Press the button repeatedly until the desired digital station is displayed. If a station broadcasts multiple programs, the following display appears, for example: "HD1"

2. "LIST" 3. "HD1" ... "HD8" Select the desired pro

gram. Up to eight programs can be se lected per station.

Displaying additional information For digital stations, additional information can be displayed on the current track, such as the name of the artist. "INFO"

Operational displays "acquiring": the system is looking for digital

stations. "No Signal": no digital stations are being re

ceived.

Satellite radio Over 100 different channels with high fidelity can be received. The channels are offered in fixed packages and must be activated. You may experience signal drops and muting events related to this new technology.

Activating or deactivated channels

1. Press the button. 2. "SAT" 3. "CAT" 4. Select the desired category.

The channels are displayed. This symbol identifies the current chan

nel.

Activating 1. Turn the right knob to select a channel that

is not yet activated. 2. Press the right knob to confirm a channel.

A phone number and the electronic serial number, ESN, are displayed. The electronic serial number is required for activation.

3. To have the channels activated, call the phone number.

Deactivating

1. Press the button. 2. "SAT" 3. "SAT"

Hold the button down.

Seite 127

Radio MINI Boost CD Entertainment

127Online Edition for Part no. 01 40 2 911 521 - VI/13

A phone number and the electronic serial number, ESN, are displayed. The electronic serial number is required for deactivation.

4. To have the channels deactivated, call the phone number.

Selecting and storing a channel

1. Press the button. 2. "SAT" 3. "CAT" 4. Select the desired category. 5. Select the desired channel. To display all channels: "ALL" To store a channel:

1. Select the symbol. 2. "SAT"

Press the button repeatedly until the de sired memory level, SAT 1 or SAT 2, is reached.

3. "1" ... "6" Press and hold the function button under the desired memory location until the channel is audible again after a brief inter ruption.

Changing to the current channel "CURR"

Additional information The name of the channel and additional infor mation on the current track are displayed, such as the name of the artist.

1. Select the desired channel. 2. "INFO"

Changing the channel using the buttons

Press the button for the corre sponding direction. The next enabled channel is opened.

Search

1. Press and hold the button for the corresponding direction. The activated channels appear on the display one after the other.

2. Release the button to select the displayed channel.

Notes When there is a signal blockage or the trans mission is suspended momentarily for more than 4 seconds, a message will appear on the display. Service may be interrupted or unavailable for specific reasons such as environmental or topo graphic conditions and others that Satellite Radio cannot directly control. Signal may not be available under tunnels, in parking garages, next to tall buildings, nearby trees with dense foliage, nearby mountains or other possible strong sources of radio interference. Service should resume normally after the source of sig nal unavailability has been cleared.

CD player Loading the CD player Insert the CD into the CD drive with the printed side up. Playback begins automatically. Reading can take a few minutes with com pressed audio files.

Seite 128

Entertainment Radio MINI Boost CD

128 Online Edition for Part no. 01 40 2 911 521 - VI/13

Starting the CD player A CD is contained in the CD player.

1. Switch on the car radio if necessary.

2. Press the button. 3. "CD"

Skipping to another track

Press the button repeatedly until the desired track is played. With the right knob: Turn the right knob until the desired track is played back.

Fast forward/reverse

Hold the button down. Tracks can be heard but are distorted.

Briefly playing and selecting a track "SC" All tracks are played briefly one after the other. To interrupt the function and select a track: "SC"

Random playback "RND" To end random playback: "RND"

Compressed audio files CD players can play back CDs with compressed audio data: MP3 and WMA.

Selecting a track 1. "LIST" 2. Select the desired directory using the right

knob. : press the right knob to open a di

rectory.

: press the right knob to close a di rectory.

3. Select other directories if you wish. 4. Highlight the desired track and press the

right knob. You can scroll through the directories during playback. To change to the current track: "CURR"

Displaying information on the track Any information stored on the currently se lected track can be displayed.

1. "LIST" 2. "TRACK"

Ejecting a CD from the CD player

Press the button. The CD emerges slightly from the CD drive.

Operational displays "Insert CD"

The CD slot is empty. "Error CD"

The CD cannot be read or is defective. "Temp. CD"

Operating temperature is too high.

Notes

CD player Do not remove the cover The CD players are officially designated

Class 1 laser products. Do not operate if the cover is damaged; otherwise, severe eye dam age can result.

Seite 129

Radio MINI Boost CD Entertainment

129Online Edition for Part no. 01 40 2 911 521 - VI/13

CDs Using CDs Do not use self-recorded CDs with la

bels applied, as these can become detached during playback due to heat buildup and can cause irrepara ble damage to the device.

Only use round CDs with a standard diame ter of 4.7 in/12 cm and do not play CDs with an adapter, e.g., single CDs; otherwise, the CDs or the adapter may jam and no lon ger eject.

General malfunctions The CD players have been optimized for

performance in vehicles. In some instances they may be more sensitive to faulty CDs than stationary devices would be.

If a CD cannot be played, first check if it has been inserted correctly.

Humidity High levels of humidity can lead to condensa tion on the CD or the laser's scan lens, and tem porarily prevent playback.

Malfunctions with particular CDs If malfunctions occur only with particular CDs, this can be due to one of the following causes:

Self-recorded CDs Possible reasons for malfunctions with self-

recorded CDs are inconsistent data creation or recording processes, or poor quality or old age of the blank CD.

Only label CDs on the upper side with a pen intended for this purpose.

Damage Avoid fingerprints, dust, scratches and

moisture. Store CDs in a sleeve.

Do not subject CDs to temperatures over 50 /122 , high humidity, or direct sun light.

CDs with copy protection CDs are often provided with a copy protection feature by the manufacturer. This can mean that some CDs cannot be played or can only be played to a limited extent.

MACROVISION This product contains copyrighted technology that is based on multiple registered US patents and the intellectual property of the Macrovision Corporation and other manufacturers. The use of this copy protection must be approved by Macrovision. Media protected by this product - unless otherwise agreed with Macrovision - may only be used for private purposes. Copying of this technology is prohibited.

External devices AUX-IN port

At a glance For connecting audio devices, e.g., MP3

player. The sound is output on the vehicle loudspeakers.

Recommendation: use medium tone and volume settings on the audio device. The tone depends on the quality of the audio files.

Seite 130

Entertainment Radio MINI Boost CD

130 Online Edition for Part no. 01 40 2 911 521 - VI/13

Connecting

The AUX-IN port is in the center console. Connect the headphone connec tor or line-out connector of the device to the AUX-IN port.

Ensure that the connector is inserted all the way into the AUX-IN port.

Playback 1. Connect the audio device, switch it on and

select a track on the audio device.

2. Press the button. 3. "AUX"

Volume The volume of the sound output is dependent on the audio device. If this volume differs markedly from the volume of the other audio sources, it is advisable to adjust the volumes.

Adjusting the volume

1. Press the button. 2. "AUX" 3. "Vol-AUX" 4. Connect the audio device, switch it on and

select a track on the audio device.

USB audio interface

At a glance It is possible to connect external audio devices. The sound is output on the vehicle loudspeak ers.

Connectors for external devices Connection via USB audio interface: Apple

iPod/iPhone, USB devices, e.g., MP3 play ers, USB flash drives, or mobile phones that are supported by the USB audio interface.

External audio devices, e.g. MP3 player: connection via AUX-IN socket.

Connection via snap-in adapter, refer to page 143, when equipped with the music interface for smartphones: Apple iPhone or mobile phones. Playback is only possible if no audio device is connected to the analog AUX-IN port.

Due to the large number of different audio de vices available on the market, it cannot be en sured that every audio device/mobile phone is operable on the vehicle. Additional information can be obtained at www.mini.com/connectivity or from the service center.

Audio files Standard audio files can be played back: MP3. WMA. WAV (PCM). AAC, M4A. Playback lists: M3U, WPL, PLS.

File system Standard file systems for USB devices are sup ported. The FAT 32 format is recommended.

Seite 131

Radio MINI Boost CD Entertainment

131Online Edition for Part no. 01 40 2 911 521 - VI/13

Connecting

The USB audio interface is in the center console.

Connection of Apple iPod/iPhone via USB audio interface To connect the iPod, use the special cable adapter for the Apple iPod. Additional informa tion can be obtained from the service center or on the Internet: www.mini.com/connectivity Connect the Apple iPod/iPhone with the AUX- IN port and USB interface. The Apple iPod/iPhone menu structure is sup ported by the USB audio interface.

Connection of a USB device via the USB audio interface Connect using a flexible adapter cable to pro tect the USB audio interface and the USB device against physical damage. Connect the USB device to the USB interface.

Audio device Connect the headphone connector or line-out connector of the device to the AUX-IN port of the USB audio interface. Ensure that the connector is inserted all the way into the AUX-IN port.

After connecting for the first time Information on all music tracks, e.g. artist or type of music, as well as playback lists are transmitted into the vehicle. This may take some time, depending on the USB device and the number of tracks. During transmission, the tracks can be called up via the file directory.

Number of tracks Information from up to four USB devices or for approx. 20,000 tracks can be stored in the ve hicle. If a fifth device is connected or if more than 20,000 tracks are stored, information on existing tracks may be deleted.

Copy protection Music tracks with integrated Digital Rights Man agement (DRM) cannot be played.

Playback

1. Press the button. 2. "IPOD" or "USB" or "AUX"

Changing the music track

Skipping to another track It is possible to skip to another track within the selected directory.

Press the button repeatedly until the desired track is played. With the right knob: Turn the right knob until the desired track is played back.

Fast forward/reverse

Hold the button down. Tracks can be heard but are distorted.

Seite 132

Entertainment Radio MINI Boost CD

132 Online Edition for Part no. 01 40 2 911 521 - VI/13

Random playback "RND" To end random playback: "RND"

Selecting a track Depending on the connected device, the track can be selected via the following category: "LIST": playback lists. "GEN": musical genre. "ART": artist. "ALB": album. 1. Select the desired category. 2. If necessary, select the desired directory us

ing the right knob. : press the right knob to open a di

rectory. : press the right knob to close a di

rectory. 3. Select other directories if you wish. 4. Highlight the desired track and press the

right knob. You can scroll through the directories during playback. To change to the current track: "CURR"

Displaying information on the track Any information stored on the currently se lected track can be displayed. "TRACK"

Adjusting the volume The volume of the sound output is dependent on the audio device. If this volume differs markedly from the volume of the other audio sources, it is advisable to adjust the volumes.

1. "LEV" 2. Turn the right knob until the desired vol

ume is set and press the knob.

Notes Do not expose the audio device to extreme en vironmental conditions, such as very high tem peratures; refer to the audio device operating instructions. Depending on the configuration of the audio files, e.g., bit rates greater than 256 kbit/s, the files may not play back correctly in each case.

Information on connection It is only possible to connect one iPod/

iPhone to the vehicle at a time. Playback from the iPod/iPhone is only pos

sible via the USB audio interface if a snap-in adapter is not used.

The connected audio device is supplied with a max. power of 500 mA if supported by the device. Therefore, do not addition ally connect the device to a socket in the vehicle; otherwise, playback may be com promised.

Do not use force when plugging the con nector into the USB interface.

Do not connect devices such as fans or lamps to the USB audio interface.

Do not connect USB hard drives. Do not use the USB audio interface to re

charge external devices.

Seite 133

Radio MINI Boost CD Entertainment

133Online Edition for Part no. 01 40 2 911 521 - VI/13

CONNECT ME.

Online Edition for Part no. 01 40 2 911 521 - VI/13

At a glance

Controls

Driving tips

Entertainment

Communication

Mobility

Reference

Online Edition for Part no. 01 40 2 911 521 - VI/13

Telephone Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys tems.

At a glance The concept Mobile phones can be connected with the vehi cle via Bluetooth. After a suitable mobile phone is paired with the vehicle once, you can operate the mobile phone via the radio, the buttons on the steer ing wheel, and via voice activation. Bluetooth is a registered trademark of Blue tooth SIG, Inc. Certain functions may need to be enabled by the mobile phone provider or service provider.

Using the mobile phone while driving Make entries only when traffic and road

conditions allow. Do not hold the mobile phone in your hand while you are driving; use the hands-free system instead. If you do not ob serve this precaution, you can endanger the ve hicle occupants and other road users.

Snap-in adapter The snap-in adapter is used to: Hold the mobile phone. Recharge the battery. Connect the mobile phone to an outside

antenna of the vehicle.

This provides for better network reception and consistent sound quality.

Do not operate a mobile phone that is con nected to the vehicle on the mobile phone key pad, as this may lead to a malfunction.

Approved mobile phones Details on which mobile phones with a Blue tooth interface are supported by the mobile phone preparation package can be obtained at www.mini.com/connectivity.

Notes At high temperatures, the charging function of the mobile phone may be limited and functions may not be executed.

Controls

1 Display. 2 Function buttons for selecting the menu

items shown directly above them on the display.

3 Redial, accept a call, start dialing, terminate a call and change to the Telephone menu.

4 Turn: highlight the menu item on the display or set the value.

Press: select the highlighted menu item or store the setting.

Seite 136

Communication Telephone

136 Online Edition for Part no. 01 40 2 911 521 - VI/13

5 Opens the main menu. 6 On/off, volume control.

Menu navigation Selecting menu items There are two ways to select a menu item on the display.

Using the right knob

To mark a menu item: turn the right knob, arrow 2.

To select a menu item: press the right knob, arrow 1.

Using the function buttons Press the left or right side of the function button under the menu item.

If only one menu item is displayed above the function button, press the middle of the button.

Representation in the Owner's Manual "" Identifies radio display texts used to select individual functions.

Symbols on the display

Symbol Meaning

Function is selected.

Leave the menu, one menu back.

Symbol Meaning

Display additional menu items.

Scroll display. The list contains more than two entries.

Reception of the wireless network: the display depends on the signal strength.

Using the hands-free system.

Roaming is active.

Pairing/unpairing the mobile phone Requirements The mobile phone is suitable, refer to

page 136. The mobile phone is ready for operation. Bluetooth is activated in the vehicle and on

the mobile phone. Bluetooth presettings may need to be

made on the mobile phone, e.g., for a con nection without confirmation or visibility, refer to the mobile phone operating in structions.

A number with at least four and a maxi mum of 16 digits was defined as the Blue tooth passkey. It is only required once for pairing.

The ignition is switched on.

Activating/deactivating Bluetooth Bluetooth is not permitted everywhere. Comply with all safety guidelines and regulations. To activate the connection:

1. Switch on the radio ready state or the igni tion.

2. Press the button.

Seite 137

Telephone Communication

137Online Edition for Part no. 01 40 2 911 521 - VI/13

3. "PHONE" 4. "BT-ON" To deactivate the connection again:

1. "BT" 2. "BT-OFF" 3. "YES"

Pairing and connecting Pairing the mobile phone To avoid becoming distracted and posing

an unnecessary hazard both to your own vehi cle's occupants and to other road users, only pair the mobile phone while the vehicle is sta tionary.

1. Switch on the radio ready state or the igni tion.

2. Press the button. 3. "PHONE" 4. "BT" 5. "PAIR"

Turn the right knob to display the Bluetooth name of your vehicle.

6. To perform additional steps on the mobile phone, refer to the mobile phone operating instructions: for instance, search for or con nect the Bluetooth device or a new device. The Bluetooth name of the vehicle appears on the mobile phone display.

7. Select the Bluetooth name of the vehicle on the mobile phone display. You are prompted by the radio or mobile phone to enter the same Bluetooth pass key.

8. Enter the passkey on the mobile phone and confirm it.

9. "ADD" 10. Enter the same passkey on the radio using

the function buttons and confirm it.

To delete the last digit: "DELETE" 11. "OK"

Press twice if necessary. If pairing was successful, the mobile phone ap pears on the radio display. Four mobile phones can be paired with the ve hicle at once. If pairing was unsuccessful: What to do if..., re fer to page 139.

Repeating the pairing procedure/help If pairing failed:

1. "REPEAT" 2. Repeat steps 6 to 10. To display the Customer Relations phone num ber: "CALLS" Turn the right knob to display the Customer Re lations phone number and information needed for pairing.

Following the initial pairing The mobile phone is detected/connected in

the vehicle within a short period of time when the engine is running or the ignition is switched on.

The phone book entries of the telephone stored on the SIM card or mobile phone are transmitted to the vehicle after detection, depending on the mobile phone.

Specific settings may be necessary in some mobile phones, e.g., authorization or a se cure connection; refer to the mobile phone operating instructions.

Connecting a particular mobile phone 1. Switch on the radio ready state or the igni

tion.

2. Press the button. 3. "PHONE" 4. "BT"

Seite 138

Communication Telephone

138 Online Edition for Part no. 01 40 2 911 521 - VI/13

5. Turn the right knob until the mobile phone to be connected is displayed.

6. "PRIO" Press the button repeatedly until the de sired position is reached.

Unpairing the mobile phone 1. Switch on the radio ready state or the igni

tion.

2. Press the button. 3. "PHONE" 4. "BT" 5. Turn the right knob until the mobile phone

to be unpaired is displayed. 6. "DELETE" 7. "YES"

What to do if... Information on suitable mobile phones, refer to page 136. The mobile phone could not be paired or con nected. Is Bluetooth activated in the vehicle and on

the mobile phone? Activate Bluetooth on the vehicle and on the mobile phone.

Do the Bluetooth passkeys on the mobile phone and the vehicle match? Enter the same passkey on the mobile phone and on the radio.

Did it take longer than 30 seconds to enter the passkey? Repeat the pairing procedure.

Are too many Bluetooth devices connected to the mobile phone or vehicle? Delete con nections with other devices if necessary.

Is the mobile phone in power-save mode or does it have only a limited remaining bat tery life? Charge the mobile phone in the snap-in adapter or via the charging cable.

Depending on the mobile phone, it is possi ble that only one mobile phone can be con nected to the vehicle. Unpair the connected

mobile phone from the vehicle and pair and connect only one mobile phone.

The mobile phone no longer reacts? Switch the mobile phone off and on again. Is the ambient temperature too high or

low? Do not expose the mobile phone to extreme environmental conditions.

No phone book entries or only some phone book entries are displayed, or they are incom plete. Transmission of the phone book entries is

not yet complete. It is possible that only the phone book en

tries of the mobile phone or the SIM card are transmitted.

It may not be possible to display phone book entries with special characters.

The number of phone book entries to be stored is too high.

Is the data volume of the contact too large, e. g., due to stored information such as notes? Reduce the data volume of the con tact.

The phone connection quality is poor. The strength of the Bluetooth signal on the

mobile phone can be adjusted, depending on the mobile phone.

Insert the mobile phone into the snap-in adapter or place it in the area of the center console.

Adjust the volume of the microphone and loudspeakers.

If all points in this list have been checked and the required function is still not available, con tact Customer Relations or the service center.

Controls Accept/reject a call. Dial a phone number. Dial a phone number from the phone book.

Seite 139

Telephone Communication

139Online Edition for Part no. 01 40 2 911 521 - VI/13

Dial a stored phone number, such as from the list of accepted calls.

End the call. When the ignition and the radio ready state are switched off, such as after the remote control is removed, an existing call can be continued for up to 25 minutes on the hands-free system.

Adjusting the volume

Turn the knob until the desired volume is se lected. The setting is stored for the remote con trol currently in use.

The ringer volume of incoming calls and the call volume can be adjusted independently. When a call is placed using the hands-free sys tem, the audio sources are muted.

Switching the microphone to mute When a call is active, the microphone can be muted. "MUTE" A microphone that has been switched to mute is automatically reactivated when a new con nection is established.

Incoming call

Receiving calls If the number of the caller is stored in the phone book and is transmitted by the network, the name of the contact is displayed. Other wise, only the phone number is displayed.

Accepting a call Briefly press the button on the steering wheel or radio.

or "YES"

Rejecting a call "NO"

Ending a call Briefly press the button on the steering wheel or radio.

or "END"

Entering a phone number

Dialing a number 1. Switch on the radio ready state or the igni

tion.

2. Press the button. 3. "PHONE" 4. "#" 5. Enter the desired phone number on the

buttons 09. To delete the last digit: "DEL"

6. Briefly press the button on the steering wheel or radio. or Press the right knob to dial the phone num ber.

Phone book Dialed phone numbers, incoming calls and en tries in the phone book are stored on lists if the mobile phone is connected to the vehicle via Bluetooth. Five lists are available:

Seite 140

Communication Telephone

140 Online Edition for Part no. 01 40 2 911 521 - VI/13

"A-Z" Entries of the phone book of the SIM card or of the mobile phone, which consist of a name and phone number, are sorted in al phabetical order.

"TOP8" The Top 8 list contains the eight phone numbers that were dialed most frequently.

"LAST8" The last eight phone numbers that were di aled are stored. The phone number dialed last is at the top of the list.

"CALLS" The phone numbers of the last eight ac cepted calls are stored. For this to be possi ble, it must be possible to transmit the phone number of the caller.

"MISSED" The phone numbers of the last eight calls that were not accepted are stored. For this to be possible, it must be possible to trans mit the phone number of the caller.

Dialing a phone number from the phone book The list A-Z is available for phone book entries. If entries with different names but the same phone number are transferred to the vehicle from the mobile phone, only one entry is dis played. The display of the phone book entries on the radio may differ from the display on the mobile phone, such as the order of the first and last names.

1. Switch on the radio ready state or the igni tion.

2. Press the button. 3. "PHONE" 4. "A-Z" 5. The arrows indicate that additional

letters can be displayed.

Turn the right knob to display additional letters if necessary.

6. Turn the right knob to select the first letter of the entry.

7. Select the entry with the function button. The phone number is dialed.

To display all entries:

1. Turn the right knob to select the first letter of the entry and press the knob.

2. Turn the right knob to select the desired entry and press the knob. or

Press the button on the steering wheel or radio to dial the number.

The phone number is dialed.

Editing and dialing a phone number from the phone book You can edit the phone number of an entry be fore making a call. This change is not stored in the phone book.

1. Selecting an entry. 2. "EDIT" 3. To delete a digit: "DEL" 4. Enter additional digits on the buttons 09. 5. Press the right knob to dial the phone num

ber.

Dialing a phone number from the phone book using the buttons on the steering wheel

1. Press and hold the button to dis play the Telephone menu.

2. Press the arrow buttons on the steering wheel to leaf through the phone book.

3. Press the button to dial the phone number.

Seite 141

Telephone Communication

141Online Edition for Part no. 01 40 2 911 521 - VI/13

Dialing a phone number stored in a list To select an entry and establish a connection:

1. Switch on the radio ready state or the igni tion.

2. Press the button. 3. "PHONE" 4. Select a list, for instance "TOP8" 5. Turn the right knob to select an entry and

press the knob to dial the phone number.

Deleting an individual entry 1. Select an entry from the list. 2. "DEL"

DTMF suffix dialing DTMF suffix dialing can be used for gaining ac cess to network services or for controlling devi ces, e.g., to make a remote inquiry of an an swering machine. The DTMF code is needed for this purpose. This function is only available if a connection exists and if the hands-free system is being used.

1. "KEYPAD" 2. Enter the DTMF code on the buttons 09. 3. If necessary, press and hold the function

button on the right or left to enter special characters.

Displaying the call duration During a call: "DURAT"

Hands-free system

General information Calls that are being made on the hands-free system can be continued on the mobile phone and vice versa.

From the mobile phone to the hands- free system Calls that were begun outside of the Bluetooth range of the vehicle can be continued on the hands-free system with the ignition switched on. Depending on the mobile phone, the system automatically switches to the hands-free sys tem. If the system does not switch over automati cally, follow the instructions on the mobile phone display; refer also to the mobile phone operating instructions.

From the hands-free system to the mobile phone Calls that are made on the hands-free system can in some cases be continued on the mobile phone; this depends on the mobile phone. Follow the instructions on the mobile phone display; refer also to the mobile phone operat ing instructions.

MINI phone numbers When the ignition is switched on, various serv ice phone numbers can be displayed. "Road Assist": Roadside Assistance, if help

is required in the event of a breakdown. "Serv. Appt.": MINI service center, if a serv

ice appointment needs to be arranged. "Cust Relat": Customer Relations, for infor

mation on all aspects of your vehicle.

Displaying the phone numbers 1. Switch on the radio ready state or the igni

tion.

2. Press the button. 3. "MINI" 4. Turn the right knob until the desired phone

number is displayed.

Seite 142

Communication Telephone

142 Online Edition for Part no. 01 40 2 911 521 - VI/13

Snap-in adapter General information More information on compatible snap-in adapters that support the functions of the mo bile phone is available at the service center.

Notes At high temperatures, the charging function of the mobile phone may be limited and functions may not be executed. When using the mobile phone via the vehicle, note the operating instructions of the mobile phone.

Installation position In the center armrest.

Inserting/removing the snap-in adapter 1. Press button 1 and remove the cover.

2. Insert the snap-in adapter at the front, ar row 1, and press down, arrow 2, until it en gages.

3. To remove the snap-in adapter: press but ton 1.

Inserting the mobile phone 1. Depending on the mobile phone, remove

the protective cap from the antenna con nector and from the USB connection of the mobile phone.

2. With the buttons facing up, slide the mobile phone up toward the electrical contacts and press it down until it engages.

The battery is charged beginning with the radio ready state of the vehicle.

Seite 143

Telephone Communication

143Online Edition for Part no. 01 40 2 911 521 - VI/13

Removing the mobile phone

Press the button and remove the mobile phone.

Seite 144

Communication Telephone

144 Online Edition for Part no. 01 40 2 911 521 - VI/13

Seite 145

Telephone Communication

145Online Edition for Part no. 01 40 2 911 521 - VI/13

MOVE ME.

Online Edition for Part no. 01 40 2 911 521 - VI/13

At a glance

Controls

Driving tips

Entertainment

Communication

Mobility

Reference

Online Edition for Part no. 01 40 2 911 521 - VI/13

Refueling Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys tems.

General information Refuel promptly At the latest, refuel at a range below

30 miles/50 km; otherwise, the engine function is not ensured and damage may occur.

Notes Switch off the engine before refueling Always switch off the engine before refu

eling; otherwise, fuel cannot be added to the tank and a message will be displayed.

Observe when handling fuel Take all precautionary measures and

observe all applicable regulations when handling fuel.

Do not carry any spare fuel containers in your vehicle. They can develop a leak and cause an explosion or cause a fire in the event of an accident.

Fuel cap Opening 1. Open fuel filler flap.

2. Turn the fuel cap counterclockwise. 3. Place the fuel cap in the bracket attached

to the fuel filler flap.

Closing 1. Fit the fuel cap and turn it clockwise until

you clearly hear a click. 2. Close the fuel filler flap.

Do not pinch the retaining strap Do not pinch the retaining strap attached

to the cap; otherwise, the cap cannot be closed properly and fuel vapors can escape.

A message is displayed if the cap is loose or missing.

Manually unlocking fuel filler flap In the event of a malfunction, the fuel filler flap can be released manually: MINI Countryman:

Seite 148

Mobility Refueling

148 Online Edition for Part no. 01 40 2 911 521 - VI/13

MINI Paceman:

1. Open the cargo area trim, arrow. 2. Pull the green knob with the gas pump

symbol. This opens the fuel filler flap.

Observe the following when refueling When refueling, insert the filler nozzle com pletely into the filler pipe. Lifting up the fuel pump nozzle during refueling causes: Premature pump shutoff. Reduced efficiency in the fuel-vapor recov

ery system. The fuel tank is full after refueling is resumed twice after the filler nozzle switches off for the first time.

Do not overfill the fuel tank Do not overfill the fuel tank; otherwise,

escaping fuel may harm the environment or damage the vehicle.

Handling fuels Follow the safety instructions provided at

gas stations; otherwise, there is a danger of personal injury and property damage.

Fuel tank capacity Approx. 12.3 US gal/47 liters, including a re serve capacity of 2.1 US gal/8 liters.

Seite 149

Refueling Mobility

149Online Edition for Part no. 01 40 2 911 521 - VI/13

Fuel Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys tems.

Fuel recommendation Gasoline For the best fuel economy, the gasoline should be sulfur-free or very low in sulfur content. Do not use fuels that are labeled at the fuel pump as containing metals.

Only refuel with lead-free gasoline with out metal additives

Do not refuel with leaded gasoline or gasoline with metal additives, e. g., manganese or iron; otherwise, the catalytic converter and other components will be permanently damaged.

Fuels with a maximum ethanol content of 10 %, i.e., E10, may be used for refueling. The ethanol should fulfill the following quality standards: US: ASTM 4806xx CAN: CGSB-3.511xx xx: always adhere to the currently applicable standard.

Do not refuel with ethanol E85 Do not refuel with E85, i.e., fuel with an

ethanol content of 85 %, or with Flex Fuel, as this would damage the engine and fuel supply system.

The engine is knock controlled. Therefore, you can refuel with different gasoline qualities.

Gasoline quality The manufacturer of your MINI recommends: AKI 91. John Cooper Works AKI 93.

Minimum fuel grade The manufacturer of your MINI recommends AKI 89.

Minimum fuel grade Do not fill up with fuel below the speci

fied minimum quality; otherwise, the engine may not run properly.

If you use gasoline with this minimum AKI rat ing, the engine may produce knocking sounds when starting at high outside temperatures. This has no effect on the engine life.

Minimum fuel grade The use of poor-quality fuels may result in

harmful engine deposits or damage. Addition ally, problems relating to drivability, starting and stalling, especially under certain environ mental conditions such as high ambient tem perature and high altitude, may occur. If drivability problems are encountered, we rec ommend switching to a high quality gasoline brand and a higher octane grade AKI num ber for a few tank fills. To avoid harmful en gine deposits, it is highly recommended to pur chase gasoline from BP or Top Tier retailers. Failure to comply with these recommendations may result in the need for unscheduled mainte nance.

Seite 150

Mobility Fuel

150 Online Edition for Part no. 01 40 2 911 521 - VI/13

Seite 151

Fuel Mobility

151Online Edition for Part no. 01 40 2 911 521 - VI/13

Wheels and tires Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys tems.

Tire inflation pressure Safety information It is not merely the tires' service life, but also driving comfort and, to a great extent, driving safety that depend on the condition of the tires and the maintenance of the specified tire pres sure.

Checking the pressure Check the tire inflation pressure regularly Regularly check the tire inflation pressure

and correct it as needed: at least twice a month and before a long trip. If you fail to observe this precaution, you may be driving on tires with in correct tire pressures, a condition that may not only compromise your vehicle's driving stabil ity, but also lead to tire damage and the risk of an accident. Do not drive with depressurized or flat tires, ex cept for run-flat tires. A flat tire will seriously impair your vehicle's handling and braking re sponse. Attempts to drive on a flat tire can lead to a loss of control over the vehicle.

Only check the tire inflation pressure when the tires are cold. This means after a maximum of 1.25 miles/2 km driving or when the vehicle has been parked for at least 2 hours. When the

tires are warm, the tire inflation pressure is higher. After correcting the tire inflation pressure, reset the Tire Pressure Monitor, refer to page 78 or reinitialize the Flat Tire Monitor, refer to page 75.

To check the inflation pressure, there is a valve extension behind the bumper.

Pressure specifications The tables below provide all the correct infla tion pressures for the specified tire sizes at am bient temperature. The inflation pressures apply to the tire sizes approved and tire brands recommended by the manufacturer of the MINI; a list of these is available from the service center. For correct identification of the right tire infla tion pressures, observe the following: Tire sizes of your vehicle Maximum allowable driving speed

Tire inflation pressures for driving up to 100 mph or 160 km/h For normal driving up to 100 mph/160 km/h, adjust pressures to the respective tire inflation pressures listed on the following pages in the column for traveling speeds up to 100 mph/ 160 km/h to achieve optimum driving comfort. These tire inflation pressures can also be found on the driver's side door pillar when the driver's door is open.

Seite 152

Mobility Wheels and tires

152 Online Edition for Part no. 01 40 2 911 521 - VI/13

MINI Countryman:

MINI Paceman:

Do not exceed the maximum permissible speed

The maximum permissible speed for these tire pressures is 100 mph/160 km/h. Do not exceed this speed; otherwise, tire damage and acci dents may occur.

Tire inflation pressures for driving above 100 mph or 160 km/h

Adjust the tire inflation pressures To drive at maximum speeds in excess of

100 mph/160 km/h, adjust pressures to the re spective tire inflation pressures listed on the following pages in the column for traveling speeds including those exceeding 100 mph or 160 km/h. Otherwise, tire damage and acci dents could occur.

Observe all national and local maximum speed limits; otherwise, violations of the laws could occur.

Tire inflation pressures for MINI Countryman Cooper

Tire size Pressure specifications in bar/PSI

Traveling speeds of up to 100 mph/160 km/h

Traveling speeds above 100 mph/160 km/

All pressure specifications in the table are indicated in bar/PSI with cold tires. Cold = ambient temperature

195/60 R 16 89 H M+S Std 205/55 R 17 91 H M+S RSC 205/55 R 17 91 H M+S A/S RSC 205/55 R 17 91 V RSC 225/45 R 18 91 V RSC 225/40 R 19 89 V RSC

2.2/32 2.2/32 2.4/35 2.4/35

More details on the permissible load and weights, refer to page 205.

Seite 153

Wheels and tires Mobility

153Online Edition for Part no. 01 40 2 911 521 - VI/13

Tire inflation pressures for MINI Countryman Cooper S/Countryman Cooper S ALL4

Tire size Pressure specifications in bar/PSI

Traveling speeds of up to 100 mph/160 km/h

Traveling speeds above 100 mph/160 km/

All pressure specifications in the table are indicated in bar/PSI with cold tires. Cold = ambient temperature

195/60 R 16 89 H M+S Std 205/55 R 17 91 H M+S RSC 205/55 R 17 91 H M+S A/S RSC 205/55 R 17 91 V RSC 225/45 R 18 91 V RSC 225/40 R 19 89 V RSC

2.2/32 2.2/32 2.6/38 2.6/38

More details on the permissible load and weights, refer to page 205.

Tire inflation pressures for MINI Countryman John Cooper Works

Tire size Pressure specifications in bar/PSI

Traveling speeds of up to 100 mph/160 km/h

Traveling speeds above 100 mph/160 km/

All pressure specifications in the table are indicated in bar/PSI with cold tires. Cold = ambient temperature

195/60 R 16 89 H M+S Std 205/55 R 17 91 H M+S RSC 205/55 R 17 91 H M+S A/S RSC 225/45 R 18 91 V RSC 225/40 R 19 89 V RSC

2.4/35 2.4/35 2.6/38 2.6/38

More details on the permissible load and weights, refer to page 205.

Seite 154

Mobility Wheels and tires

154 Online Edition for Part no. 01 40 2 911 521 - VI/13

Tire inflation pressures for MINI Paceman Cooper

Tire size Pressure specifications in bar/PSI

Traveling speeds of up to 100 mph/160 km/h

Traveling speeds above 100 mph/160 km/

All pressure specifications in the table are indicated in bar/PSI with cold tires. Cold = ambient temperature

195/60 R 16 89 H M+S Std 205/55 R 17 91 H M+S RSC 205/55 R 17 91 H M+S A/S RSC 205/55 R 17 91 V RSC 225/45 R 18 91 V RSC 225/40 R 19 89 V RSC

2.2/32 2.2/32 2.4/35 2.4/35

More details on the permissible load and weights, refer to page 206.

Tire inflation pressures for MINI Paceman Cooper S / Paceman Cooper S ALL4

Tire size Pressure specifications in bar/PSI

Traveling speeds of up to 100 mph/160 km/h

Traveling speeds above 100 mph/160 km/

All pressure specifications in the table are indicated in bar/PSI with cold tires. Cold = ambient temperature

195/60 R 16 89 H M+S Std 205/55 R 17 91 H M+S RSC 205/55 R 17 91 H M+S A/S RSC 205/55 R 17 91 V RSC 225/45 R 18 91 V RSC 225/40 R 19 89 V RSC

2.2/32 2.2/32 2.6/38 2.6/38

More details on the permissible load and weights, refer to page 206.

Seite 155

Wheels and tires Mobility

155Online Edition for Part no. 01 40 2 911 521 - VI/13

Tire inflation pressures for MINI Paceman John Cooper Works

Tire size Pressure specifications in bar/PSI

Traveling speeds of up to 100 mph/160 km/h

Traveling speeds above 100 mph/160 km/

All pressure specifications in the table are indicated in bar/PSI with cold tires. Cold = ambient temperature

195/60 R 16 89 H M+S Std 205/55 R 17 91 H M+S RSC 205/55 R 17 91 H M+S A/S RSC 225/45 R 18 91 V RSC 225/40 R 19 89 V RSC

2.4/35 2.4/35 2.7/39 2.7/39

More details on the permissible load and weights, refer to page 206.

Tire identification marks Knowledge of the labeling on the side of the tire makes it easier to identify and choose the right tires.

Tire size Example: 225/45 R 17 91 V 225: nominal width in mm 45: aspect ratio in % R: radial tire code 17: rim diameter in inches 91: load rating, not for ZR tires

Speed letter Q = up to 100 mph/160 km/h T = up to 118 mph/190 km/h H = up to 131 mph/210 km/h V = up to 150 mph/240 km/h W = up to 167 mph/270 km/h Y = up to 186 mph/300 km/h

Tire Identification Number Tires with DOT codes meet the guidelines of the U.S. Department of Transportation. DOT code: DOT xxxx xxx 1012 xxxx: manufacturer code for the tire brand xxx: tire size and tire design 1012: tire age

Uniform Tire Quality Grading Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width. For example: Treadwear 200 Traction AA Temperature A

DOT Quality Grades Treadwear Traction AA A B C Temperature A B C

Seite 156

Mobility Wheels and tires

156 Online Edition for Part no. 01 40 2 911 521 - VI/13

Conform to Federal Safety Requirements All passenger car tires must conform to

Federal Safety Requirements in addition to these grades.

Treadwear The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified gov ernment test course. For example, a tire graded 150 would wear one and one-half (1 1/2) times as well on the government course as a tire graded 100. The relative performance of tires depends upon the actual conditions of their use, however, and may depart significantly from the norm due to variations in driving hab its, service practices and differences in road characteristics and climate.

Traction The traction grades, from highest to lowest, are AA, A, B, and C. Those grades represent the tires ability to stop on wet pavement as measured under control led conditions on specified government test surfaces of asphalt and concrete. A tire marked C may have poor traction performance. The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hy droplaning, or peak traction characteristics.

Temperature The temperature grades are A, the highest, B, and C, representing the tires resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the ma terial of the tire to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure. The grade C corresponds to a level of performance which all passenger car tires must meet under the Federal Motor Vehi

cle Safety Standard No. 109. Grades B and A represent higher levels of performance on the laboratory test wheel than the minimum re quired by law.

Temperature grade for this tire The temperature grade for this tire is es

tablished for a tire that is properly inflated and not overloaded. Excessive speed, underinfla tion, or excessive loading, either separately or in combination, can cause heat buildup and possible tire failure.

RSC Run-flat tires The symbol identifying run-flat tires is a circle with the letters RSC on the sidewall, refer to page 160.

M+S Winter and all-season tires. These have better winter properties than summer tires.

XL Designation for specially reinforced tires.

Tire tread Summer tires The tread depth should not be less than 0.12 in/3 mm, although European legislation, for example, requires a minimum tread depth of only 0.063 in/1.6 mm. At tread depths less than 0.12 in/3 mm, there is a great danger of hydroplaning even in low water depths and at raised speeds.

Winter tires The suitability of winter tires for winter driving is reduced noticeably when their tread depth becomes less than 0.16 in/4 mm.

Seite 157

Wheels and tires Mobility

157Online Edition for Part no. 01 40 2 911 521 - VI/13

Minimum tread depth

Wear indicators in the tread base are distrib uted around the circumference of the tire and are marked on the tire sidewall with TWI, Tread Wear Indicator. When the tire tread has been worn down to the wear indicators, a tread has reached a depth of 0.063 in/1.6 mm.

Tire damage General information Inspect your tires often for damage, foreign ob jects lodged in the tread, and tread wear.

Notes Driving over rough or damaged road surfaces, as well as debris, curbs and other obstacles can cause serious damage to wheels, tires and sus pension parts. This is more likely to occur with low-profile tires, which provide less cushioning between the wheel and the road. Be careful to avoid road hazards and reduce your speed, es pecially if your vehicle is equipped with low- profile tires. Indications of tire damage or other vehicle de fects: Unusual vibrations during driving. Unusual handling such as a strong ten

dency to pull to the left or right. Damage can be caused by driving over curbs, road damage and similar situations.

In case of tire damage If there are indications of tire damage, re

duce your speed immediately and have the wheels and tires checked right away; other wise, there is the increased risk of an accident. Drive carefully to the next service center or tire shop. If necessary, have the vehicle towed. Otherwise, tire damage can present a life- threatening hazard to vehicle occupants and other road users.

Repair of tire damage For safety reasons, the manufacturer of

your vehicle recommends that you do not have damaged tires repaired; they should be re placed. Otherwise, damage can occur as a re sult.

Tire age Recommendation For several reasons, among other things be cause of beginning brittleness, the manufac turer of your MINI recommends mounting new tires at the latest after six years, regardless of the actual wear.

Manufacture date The date of manufacture of the tires is specified in the tire label: DOT 2313: the tire was manufactured in week 23 of 2013.

Seite 158

Mobility Wheels and tires

158 Online Edition for Part no. 01 40 2 911 521 - VI/13

Changing wheels and tires Mounting

Information on mounting tires Have mounting and balancing performed

only by a service center or tire specialist. If this work is not carried out properly, there is the danger of subsequent damage and related safety hazards.

Wheel and tire combination Information on the right wheel and tire combi nation and rim version for your vehicle can be obtained from the service center. Incorrect wheel and tire combinations impair the function of a variety of systems such as ABS or DSC. To maintain good handling and vehicle re sponse, use only tires with a single tread con figuration from a single manufacturer. Following tire damage, have the original wheel and tire combination remounted on the vehicle as soon as possible.

Approved wheels and tires The manufacturer of your vehicle recom

mends that you use only wheels and tires that have been approved for your particular vehicle model. For example, despite having the same official size ratings, variations can lead to body contact and with it, the risk of severe accidents. The manufacturer of your vehicle cannot evalu ate non-approved wheels and tires to deter mine if they are suited for use, and therefore cannot ensure the operating safety of the vehi cle if they are mounted.

Wheels with electronics for TPM Tire Pressure Monitor When mounting new tires or changing from summer to winter tires or vice versa, only use wheels with TPM electronics; otherwise, the Tire Pressure Monitor will not be able to detect a flat tire, refer to page 77. Your service center will be glad to advise you.

Recommended tire brands

For each tire size, the manufacturer of your ve hicle recommends certain tire brands. These are indicated by the clearly visible marking on the tire sidewall. With proper use, these tires meet the highest standards for safety and handling.

Retreaded tires The manufacturer of your vehicle does not rec ommend the use of retreaded tires.

Retreaded tires Possibly substantial variations in the de

sign and age of the tire casing structures can limit service life and have a negative impact on road safety.

Winter tires The manufacturer of your vehicle recommends winter tires for winter roads or at temperatures below +45 /+7 . Although so-called all-season M+S tires do pro vide better winter traction than summer tires, they do not provide the same level of perform ance as winter tires.

Seite 159

Wheels and tires Mobility

159Online Edition for Part no. 01 40 2 911 521 - VI/13

Maximum speed of winter tires If the maximum speed of the vehicle is higher than the permissible speed for the winter tires, then display a corresponding sign in the field of vision. You can obtain this sign from the tire specialist or from your service center.

Maximum speed for winter tires Do not exceed the maximum speed for

the winter tires; otherwise, tire damage and ac cidents can occur.

Run-flat tires When mounting new tires or changing from summer to winter tires or vice versa, use run- flat tires for your own safety. Also, a compact wheel is not available in case of a flat tire. Your service center will be glad to advise you.

Rotating wheels between axles Different wear patterns occur on the front and rear axles, depending on the individual condi tions of use. To ensure even wear on the tires, the wheels can be rotated between the axles. Your service center will be glad to advise you. After changing the tires, check the tire inflation pressure and correct it if necessary.

Storage Store wheels and tires in a cool, dry place with as little exposure to light as possible. Always protect tires against all contact with oil, grease and fuels. Do not exceed the maximum tire inflation pres sure indicated on the side wall of the tire.

Run-flat tires Label

The symbol identifying run-flat tires is a circle with the letters RSC on the sidewall. Run-flat tires are tires with special rims that support themselves for a limited period of time. The sidewall reinforcement ensures that the tire can continue to be used to a limited extent if it has lost pressure and even if it has become completely depressurized. For continued driving in the event of a flat tire, refer to page 76.

Correcting a flat tire Safety measures in case of a breakdown Park the vehicle as far as possible

from passing traffic and on solid ground. Switch on the hazard warn ing system.

Let the steering wheel lock engage with the wheels in the straight-ahead position, set the handbrake, and engage first gear or re verse, or engage selector lever position P.

Have all vehicle occupants get out of the vehicle and ensure that they remain out side the immediate area in a safe place, such as behind a guardrail.

Seite 160

Mobility Wheels and tires

160 Online Edition for Part no. 01 40 2 911 521 - VI/13

If a warning triangle or portable hazard warning lamp is required, set it up on the roadside at an appropriate distance from the rear of the vehicle. Comply with all safety guidelines and regulations.

The procedure to correct a flat tire depends on the equipment in the vehicle: Run-flat tires, refer to page 160. MINI Mobility System, refer to page 161.

MINI Mobility System Notes Follow the instructions on using the Mobi

lity System found on the compressor and sealant bottle.

Use of the Mobility System may be ineffec tive if tire damage is greater than approx. 1/8 in/4 mm in size.

Contact the nearest service center if the tire cannot be made drivable.

If possible, do not remove foreign bodies that have penetrated the tire.

Pull the speed limit sticker off the sealant bottle and apply it to the steering wheel.

Sealant and compressor

1 Sealant bottle and speed limit sticker 2 Filling hose

Note the use-by date on the sealant bottle.

3 Holder for the sealant bottle 4 Compressor 5 Connector and cable for the lighter socket/

socket in passenger compartment97. 6 Connection hose for connecting the com

pressor and sealant bottle or the compres sor and wheel

7 On/off switch 8 Pressure gauge for displaying the tire infla

tion pressure 9 Release button for reducing the tire infla

tion pressure

The connector, cable, and connecting hose are stowed in the compressor housing.

Using the Mobility System To repair a flat tire with the Mobility System, proceed as follows: Filling the tire with sealant Distributing the sealant Correcting the tire inflation pressure

Filling the tire with sealant Adhere to the specified sequence Adhere to the specified sequence of the

steps; otherwise, sealant may escape under high pressure.

1. Shake the sealant bottle. 2. Pull the connection hose 6 fully out of the

compressor housing and screw it onto the sealant bottle connection. Ensure that the connection hose is not kinked.

Seite 161

Wheels and tires Mobility

161Online Edition for Part no. 01 40 2 911 521 - VI/13

3. Insert the sealant bottle into the compres sor housing in a vertical position.

4. Unscrew the dust cap off of the valve of the defective wheel and screw the filling hose 2 of the sealant bottle onto the valve.

5. Ensure that the compressor is switched off. 6. Insert connector 5 into the lighter socket/

socket in the passenger compartment, refer to page 97.

7. When the engine is running: Switch on the compressor and let it run for approx. 3 to 8 minutes to fill sealant into the tire and achieve a tire inflation pressure of approx. 1.8 bar/26 psi. While sealant is being filled, the inflation pressure may intermittently rise to approx. 5 bar/73 psi. Do not switch off the com pressor in this phase.

8. Switch off the compressor. Do not allow the compressor to run too long

Do not allow the compressor to run longer than 10 minutes; otherwise, the device will overheat and may be damaged.

If an air pressure of 1.8 bar/26 psi is not reached:

1. Unscrew the filling hose 2 from the wheel and drive forward and back approx. 33 ft/10 m to evenly distribute the sealant in the tire.

2. Inflate the tire again using the compressor.

If the inflation pressure of 1.8 bar/26 psi is still not reached, the tire is too heavily damaged. Contact the nearest service center.

Stowing the Mobility System 1. Unscrew the filling hose 2 of the sealant

bottle from the wheel. 2. Unscrew the compressor connection hose 6

from the sealant bottle. 3. Connect the filling hose 2 of the sealant

bottle with the free connector on the seal ant bottle. This prevents left-over sealant from escap ing from the bottle.

4. Wrap the empty sealant bottle in suitable material to avoid dirtying the cargo area.

5. Stow the Mobility System back in the vehi cle.

Distributing the sealant Drive approx. 3.1 miles/5 km to evenly distrib ute the sealant. Do not exceed a speed of 50 mph/80 km/h. If possible, do not drop below a speed of 10 mph/20 km/h.

Correcting the tire inflation pressure 1. After driving approx. 3.1 miles/5 km, or

about 10 minutes, stop in a suitable loca tion.

2. Screw the connection hose 6 of the com pressor directly onto the tire valve.

3. Insert the connector 5 into the power socket in the passenger compartment.

4. Correct the tire inflation pressure to 1.8 bar/26 psi. When the engine is running: To increase the inflation pressure:

switch on the compressor. To check the currently set inflation pressure, switch off the compressor.

To reduce the inflation pressure: press the release button 9.

Seite 162

Mobility Wheels and tires

162 Online Edition for Part no. 01 40 2 911 521 - VI/13

Do not allow the compressor to run too long

Do not allow the compressor to run longer than 10 minutes; otherwise, the device will overheat and may be damaged.

If the inflation pressure is not maintained, take the vehicle on another drive, distributing the sealant, refer to page 162. Then repeat steps 1 to 4 once. If the inflation pressure of 1.8 bar/26 psi is still not reached, the tire is too heavily damaged. Contact the nearest service center.

Continuing the trip Note the maximum speed Do not exceed the maximum speed of

50 mph/80 km/h; otherwise, accidents can oc cur.

Replace the defective tire as soon as possible and have the wheel balanced. Have the Mobility System refilled.

Snow chains Only certain fine-link snow chains have been tested by MINI, classified as safe for use, and recommended. Consult your service center for more information. Use only in pairs on the front wheels, equipped with tires of the following size: 195/60 R 16 M+S With ALL4 all-wheel drive: only mount snow chains on the front wheels. Observe the manufacturer's instructions when mounting snow chains. Do not exceed a speed of 30 mph or 50 km/h when using snow chains. Do not initialize the Flat Tire Monitor if snow chains are mounted; otherwise, the instrument might issue an incorrect reading. When driving with snow chains, it may be useful to tempora

rily deactivate DSC or activate DTC, refer to page 81.

Seite 163

Wheels and tires Mobility

163Online Edition for Part no. 01 40 2 911 521 - VI/13

Engine compartment Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also

describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys tems.

Important features in the engine compartment

1 Vehicle identification number 2 Battery, under the cover178 3 Dip stick for engine oil166 4 Engine oil filler neck166

5 Coolant expansion tank168 6 Engine compartment fuse box178 7 Reservoir for washer fluid for the headlamp

and window washer system55

Hood Notes

Working in the engine compartment Never attempt to perform any service or

repair operations on your vehicle without the necessary professional technical training.

If you are unfamiliar with the statutory guide lines, have any work on the vehicle performed only by a service center. If this work is not carried out properly, there is the danger of subsequent damage and related safety hazards.

Seite 164

Mobility Engine compartment

164 Online Edition for Part no. 01 40 2 911 521 - VI/13

To avoid damage, make sure that the wiper arms are resting against the wind

shield before you open the engine compart ment. Do not open the engine hood before the engine has cooled down; otherwise, injuries may result.

Unlocking and opening the hood 1. Pull the lever.

2. Lift the hood all the way. 3. Press the release handle and open the

hood.

Danger of injury when the hood is open There is a danger of injury from protrud

ing parts when the hood is open.

Closing the hood

Close the hood from a height of ap prox. 16 in/40 cm with momentum. It must be clearly heard to engage.

Hood open when driving If you see any signs that the hood is not

completely closed while driving, pull over im mediately and close it securely.

Danger of pinching Make sure that the closing path of the

hood is clear; otherwise, injuries may result.

Seite 165

Engine compartment Mobility

165Online Edition for Part no. 01 40 2 911 521 - VI/13

Engine oil Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys tems.

Engine oil General information Engine oil consumption depends on the driving style and the conditions of use. A highly sporty driving style, for example, results in considera bly higher engine oil consumption. Therefore, regularly check the engine oil level after refueling.

Checking the oil level with a dip stick 1. Park the vehicle on level ground when the

engine is at operating temperature, i.e., af ter driving continuously for at least 6 2 miles/10 km.

2. Switch the engine off. 3. After approx. 5 minutes, pull out the dip

stick and wipe it off with a lint-free cloth, paper towel, etc.

4. Carefully insert the dip stick all the way into the measuring tube and pull it out again.

The oil level must be between the two marks on the dip stick.

The oil quantity between the two marks on the dip stick equals approx. 1 US quart/1 liter.

Do not exceed the high mark. Do not exceed the high mark of the dip

stick. Overfilling oil damages the engine.

Adding engine oil

Filler neck

Add a maximum quantity of 1 US quart/1 liter of oil only after the corresponding message ap pears on the Control Display or, in diesel en gines, after the oil level is just above the low mark of the dip stick, refer to page 166.

Add oil promptly Add oil within the next 30 miles/50 km;

otherwise, engine damage could result.

Seite 166

Mobility Engine oil

166 Online Edition for Part no. 01 40 2 911 521 - VI/13

Too much engine oil Have the vehicle checked immediately;

otherwise, surplus oil can lead to engine dam age.

Protect children Keep oil, grease, etc., out of reach of chil

dren and heed the warnings on the containers to prevent health risks.

Oil types for refilling

Notes No oil additives Do not use oil additives as these may

cause engine damage.

Viscosity classes of engine oils When selecting an engine oil, ensure that

the engine oil belongs to one of the SAE viscos ity classes 0W-40, 0W-30, 5W-40, or 5W-30, or malfunctions or engine damage may occur.

The engine oil quality is critical for the life of the engine. Due to national regulations, some oil types are not available in every country.

Approved oil types

Gasoline engine

BMW High Performance SAE 5W-30

BMW Longlife-01

BMW Longlife-01 FE

Further information on approved oil types can be obtained from the service center.

Alternative oil types If the approved engine oils are not available, up to 1 US quart/1 liter of an oil with the following specification can be used:

Gasoline engine

API SM or a higher quality standard

Oil change An oil change should be carried out by the serv ice center only.

Seite 167

Engine oil Mobility

167Online Edition for Part no. 01 40 2 911 521 - VI/13

Coolant Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys tems.

General information Danger of burns from hot engine Do not open the cooling system while the

engine is hot; otherwise, escaping coolant may cause burns.

Suitable additives Only use suitable additives; otherwise,

engine damage may occur. The additives are harmful to your health.

Coolant consists of water and additives. Not all commercially available additives are suitable for your MINI vehicle. Ask your service center for suitable additives.

Coolant temperature If the coolant and therefore the engine over heat, a warning lamp lights up, refer to page 190.

Coolant level Checking 1. Do not open the hood until the engine has

cooled down.

2. Turn the expansion tank cap counterclock wise slightly to allow any accumulated pressure to escape; then continue turning to open.

3. The coolant level is correct if it is between the markings. The markings are located on the side of the coolant reservoir.

Refilling 1. Do not open the hood until the engine has

cooled down. 2. Turn the expansion tank cap counterclock

wise slightly to allow any accumulated pressure to escape, then continue turning to open.

3. If the coolant level is low, slowly add cool ant up to the specified level; do not overfill.

4. Twist the cap closed. 5. Have the cause of the coolant loss elimi

nated as soon as possible.

Disposal Comply with the appropriate environ mental protection regulations when dis

posing of coolant additives.

Seite 168

Mobility Coolant

168 Online Edition for Part no. 01 40 2 911 521 - VI/13

Maintenance Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys tems.

MINI maintenance system

The MINI maintenance system provides infor mation on required maintenance measures and thus provides support in maintaining road safety and the operational reliability of the ve hicle.

Condition Based Service CBS Sensors and special algorithms take into ac count the various driving conditions of your MINI. Based on this, Condition Based Service determines the current and future mainte nance requirements. The system makes it possible to adapt the amount of maintenance you need to your user profile.

Detailed information on service requirements can be displayed in the tachometer, refer to page 64.

Service data in the remote control Information on the required maintenance is continuously stored in the remote control. Your service center will read out this data and sug gest the right array of service procedures for your vehicle. Therefore, hand your service spe cialist the remote control that you used most recently.

Setting the correct date Make sure the date is set correctly; other

wise, the effectiveness of CBS Condition Based Service is not ensured.

Service and Warranty In formation Booklet for US models and Warranty and Service Guide Book let for Canadian models Please consult your Service and Warranty Infor mation Booklet for US models and Warranty and Service Guide Booklet for Canadian models for additional information on service require ments. Maintenance and repair should be performed by your service center. Make sure to have regu lar maintenance procedures recorded in the ve hicle's Service and Warranty Information Book let for US models, and in the Warranty and Service Guide Booklet for Canadian models. These entries are proof of regular maintenance.

Seite 169

Maintenance Mobility

169Online Edition for Part no. 01 40 2 911 521 - VI/13

Socket for OBD Onboard Diagnosis

Socket for Onboard Diagnosis The socket for Onboard Diagnosis may

only be used by the service center, by work shops that operate according to the specifica tions of the vehicle manufacturer with appro priately trained personnel, and by other authorized persons. Otherwise, its use may lead to vehicle malfunctions.

Primary components in the vehicle emissions can be checked via the OBD socket using a de vice.

Emissions The warning lamps light up. The vehicle is producing higher emissions. You can continue your journey, but moderate

your speed and exercise due caution. Have the vehicle checked as soon as possible.

Under certain circumstances, one of the lamps flashes or lights up continuously. This indicates that there is excessive misfiring or a malfunc tion in the engine. If this happens, reduce the vehicle speed and drive to the next service cen ter promptly. Serious engine misfiring within a brief period can seriously damage emission control components, in particular the catalytic converter. In addition, the mechanical engine components may become damaged.

If the fuel filler cap is not properly tight ened, the OBD system may conclude

that fuel vapor is escaping; this will cause a dis play to light up. If the filler cap is then tight ened, the display should go out in a few days.

Seite 170

Mobility Maintenance

170 Online Edition for Part no. 01 40 2 911 521 - VI/13

Replacing components Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys tems.

Wiper blade replacement General information

Do not fold down the wipers without wiper blades

Do not fold down the wipers if wiper blades have not been installed; this may damage the windshield.

Replacing the front wiper blades 1. Fold up and hold the wiper arm. 2. Squeeze the locking spring, arrows 1, and

fold out the wiper blade, arrow 2.

3. Take the wiper blade out of the catch mechanism toward the front.

4. Press the new wiper blade into the fixation until it engages audibly.

5. Fold down the wiper arm.

Risk of damage Before opening the hood, ensure that the

wiper arms with wiper blades are folded onto the window; otherwise, damage may occur.

Replacing the rear wiper blade MINI Countryman:

MINI Paceman:

1. Fold up and hold the wiper arm. 2. Turn the wiper blade all the way back, ar

row. 3. Press the wiper blade against the stop to

push it out of the fixation. 4. Press the new wiper blade into the fixation

until it engages audibly. 5. Fold down the wiper arm.

Seite 171

Replacing components Mobility

171Online Edition for Part no. 01 40 2 911 521 - VI/13

Lamp and bulb replace ment Notes

Lamps and bulbs Lamps and bulbs make an essential contribu tion to vehicle safety. Therefore, exercise cau tion when handling lamps and bulbs. The manufacturer of the vehicle recommends that you entrust corresponding procedures to the service center if you are unfamiliar with them or they are not described here. You can obtain a selection of replacement bulbs at the service center.

Danger of burns Only change bulbs when they are cool;

otherwise, there is the danger of getting burned.

Working on the lighting system When working on the lighting system,

you should always switch off the lights affected to prevent short circuits. To avoid possible injury or equipment damage when replacing bulbs, observe any instructions provided by the bulb manufacturer.

Do not touch the bulbs Do not touch the glass of new bulbs with

your bare hands, as even minute amounts of contamination will burn into the bulb's surface and reduce its service life. Use a clean tissue, cloth or something similar, or hold the bulb by its base.

Caring for the headlamps, refer to page 187. For bulb replacement that is not described here, please contact the service center or a workshop that works according to the repair procedures of the manufacturer with corre spondingly trained personnel.

For checking and adjusting headlamp aim, please contact your MINI dealer.

Light-emitting diodes LEDs Light-emitting diodes installed behind translu cent lenses serve as the light source for many of the controls and displays in the vehicle. These light-emitting diodes, which operate us ing a concept similar to that applied in conven tional lasers, are officially designated as Class 1 light-emitting diodes.

Do not remove the covers Do not remove the covers, and never

stare into the unfiltered light for several hours; otherwise, irritation of the retina could result.

Headlamp glass Condensation can form on the inside of the headlamps in cool or humid weather. When the light is switched on, the condensation evapo rates after a short time. The headlamps do not need to be changed. If the condensation in the headlamps does not evaporate after trips with the lights switched on, and the amount of moisture in the head lamps increases, for example if water droplets form, have them checked by your service cen ter.

Bi-xenon headlamps These bulbs have a very long life and the likeli hood of failure is very low, provided that they are not switched on and off excessively. If a bulb should nevertheless fail, you can continue driving cautiously with the front fog lamps, pro vided this is permitted by local laws.

Do not perform work/bulb replacement on xenon headlamps

Have any work on the xenon lighting system, including bulb replacement, performed only by a service center.

Seite 172

Mobility Replacing components

172 Online Edition for Part no. 01 40 2 911 521 - VI/13

Due to the high voltage present in the system, there is the danger of fatal injuries if work is carried out improperly.

Front lamps, bulb replacement

Halogen low beams and high beams Bulb H13, 60/55 watt

Wear protective goggles and gloves Halogen bulbs are pressurized. Therefore,

wear protective goggles and gloves. Otherwise, there is a danger of injuries if the bulb is acci dentally damaged during replacement.

Attach the cover carefully When attaching the cover, proceed care

fully; otherwise, leaks may occur, causing dam age to the headlamp system.

Access to the bulbs through the engine compartment Follow the general instructions on lamps and bulbs, refer to page 172. Low beam/high beam bulbs can be changed from the engine compartment.

To remove the cover:

1. Press the tab. 2. Fold away the cover and take it out of the

holder. Proceed in reverse order to attach the cover.

Attach the cover carefully When attaching the cover, proceed care

fully; otherwise, leaks may occur, causing dam age to the headlamp system.

Replacing the bulb 1. Turn the bulb counterclockwise, arrow 1,

and remove it, arrow 2.

2. Press the release, arrow 1, and pull off the connector, arrow 2.

3. Insert the new bulb and attach the cover in reverse order.

Turn signal, parking lamp, roadside parking lamp, and front fog lamp

Access to the bulbs via the wheel housing Follow the general instructions on lamps and bulbs, refer to page 172.

Seite 173

Replacing components Mobility

173Online Edition for Part no. 01 40 2 911 521 - VI/13

1 Turn signal 2 Parking lamp/roadside parking lamp/fog

lamp

Replacing the turn signal bulb 21-watt bulb, P 21 W, or PY 21 W

1. Turn the wheel. 2. Remove cover 1.

To do this, turn the cover counterclockwise. 3. Remove the inside cover. To do this, turn

the cover counterclockwise.

4. Turn the bulb counterclockwise and re move it.

5. Insert the new bulb and attach the covers in reverse order.

Replacing the parking lamp bulb and roadside parking lamp bulb 5-watt bulb, W 5 W

1. Turn the wheel. 2. Remove cover 2.

To do this, turn the cover counterclockwise. 3. Turn the upper bulb counterclockwise and

remove it.

4. Insert the new bulb and attach the cover in reverse order.

Replacing the front fog lamp bulb H8 bulb, 35 watt

1. Turn the wheel. 2. Remove cover 2.

To do this, turn the cover counterclockwise. 3. Pull off the plug-in cable connector. 4. Turn the lower bulb counterclockwise and

remove it.

5. Insert the new bulb and attach the cover in reverse order.

Seite 174

Mobility Replacing components

174 Online Edition for Part no. 01 40 2 911 521 - VI/13

Lateral turn signals 5-watt bulb, W 5 W

1. Open the hood.

2. Squeeze the clip, arrows, and remove the bulb holder.

3. Remove the bulb by turning it to the left and replace it.

4. Insert the new bulb and attach the cover in reverse order.

Side marker lamps To replace these bulbs, contact the service cen ter.

Tail lamps, bulb replacement Follow the general instructions on lamps and bulbs, refer to page 172. Turn signal: 21-watt bulb, PY 21 W

MINI Countryman

1 Brake/tail lamp 2 Turn signal

3 Brake/tail lamp 4 Backup lamp

MINI Paceman

1 Brake lamp 2 Tail lamp 3 Turn signal 4 Backup lamp

Replacing All bulbs are integrated in a central bulb holder.

MINI Countryman 1. Switch off the lamps and take the remote

control out of the ignition lock. 2. Open the tailgate. 3. Press the cover out of the cargo area side

panel at the rear and remove it.

4. Detach the emergency release of the fuel filler flap, refer to page 148, and push it aside with the foam insert. Ensure that the emergency release is not damaged.

Seite 175

Replacing components Mobility

175Online Edition for Part no. 01 40 2 911 521 - VI/13

5. Disengage the bulb holder by pushing down the clip, arrow 1.

6. Take out the bulb holder and detach the cable, arrow 2.

7. Apply gentle pressure to the bulb while turning it to the left and remove it.

8. Insert the new bulb and mount the bulb holder in reverse order. Ensure that the bulb holder engages in all fasteners.

9. Return the foam insert to its original posi tion and reattach the emergency release of the fuel filler flap.

10. Reattach the cover.

MINI Paceman 1. Switch off the lamps and take the remote

control out of the ignition lock. 2. Open the tailgate. 3. Remove the cover from the cargo area side

trim.

4. Unlock the fastening elements, arrows 1, by turning.

5. Remove the screws, arrows 2, using the hex key from the vehicle document portfolio.

6. Remove the tail lamp. 7. Disengage the bulb holder by pushing

down the clip, arrows 1.

8. Take out the bulb holder and detach the cable, arrow 2.

9. Apply gentle pressure to the bulb while turning it to the left and remove it.

10. Insert the new bulb and mount the bulb holder in reverse order. Ensure that the bulb holder engages in all fasteners.

License plate lamps 5-watt bulb, C 5 W

Seite 176

Mobility Replacing components

176 Online Edition for Part no. 01 40 2 911 521 - VI/13

Replacing

MINI Countryman 1. Push the lamp to the left in the catch of the

lamp housing using the screwdriver, ar row 1.

2. Take out the lamp, arrow 2. 3. Replace the bulb. 4. Insert the lamp.

MINI Paceman 1. Push the lamp to the left in the catch of the

lamp housing using the screwdriver, ar row 1.

2. Take out the lamp, arrow 2. 3. Replace the bulb. 4. Insert the lamp.

Center brake lamp This lamp uses LED technology for operation. In case of a defect, please contact your service center or a workshop that works according to the repair procedures of the manufacturer of your MINI with correspondingly trained person nel.

Changing wheels Notes The vehicle may be equipped with conven tional tires with the Mobility System, refer to page 161, or with run-flat tires, refer to page 160. No spare tire is available in the case of a flat tire. Suitable tools for changing the wheels are available from the service center as an acces sory.

Jacking points for the vehicle jack MINI Countryman:

MINI Paceman:

The jacking points for the vehicle jack are lo cated in the positions shown.

Seite 177

Replacing components Mobility

177Online Edition for Part no. 01 40 2 911 521 - VI/13

Vehicle battery Maintenance The battery is maintenance-free, i.e., the elec trolyte will last for the life of the battery in tem perate climate conditions. The service center will be happy to answer any questions on the battery.

Battery replacement Use approved vehicle batteries Only use vehicle batteries that have been

approved for your vehicle by the manufacturer; otherwise, the vehicle could be damaged and systems or functions may not be fully availa ble.

Have the vehicle battery registered by the serv ice center after it is replaced to ensure that all comfort functions are available without restric tions and that any associated Check Control messages are no longer displayed.

Charging the battery

Note Do not connect the charger to the socket Do not connect the battery charger to the

socket installed in the vehicle at the factory as this could damage the battery.

Only charge the battery in the vehicle when the engine is switched off. Connections, refer to page 180.

General information Ensure that the battery is sufficiently charged to achieve the full battery life. It may be necessary to charge the battery in the following cases: When the vehicle is frequently used to

travel short distances. When the vehicle has not been driven for

more than one month.

Power failure After a temporary power failure, some equip ment will be restricted in its use and will need to be reinitialized. In addition, certain individual settings will be lost and must be updated: Time and date: the values must be up

dated, refer to page 63. Radio: the stations need to be stored again,

refer to page 126. Glass sunroof, electrical: it may only be pos

sible to tilt the roof. The system needs to be initialized. Contact the service center.

Disposing of old batteries Have used batteries disposed of by the service center after they are replaced or take them to a recycling center.

Maintain the battery in an upright position for transport and storage. Secure the battery so that it does not tip over during transport.

Fuses Replacing fuses Never attempt to repair a blown fuse and

do not replace a defective fuse with a substi tute of another color or amperage rating; this could lead to a circuit overload, ultimately re sulting in a fire in the vehicle.

Fuses should be replaced by the service center. Information on the fuses can be found on the inside of the covers.

Seite 178

Mobility Replacing components

178 Online Edition for Part no. 01 40 2 911 521 - VI/13

In the engine compartment

Opening the cover Press the snap lock.

In interior

On the right side of the footwell.

Opening the cover Push out at the recess.

Seite 179

Replacing components Mobility

179Online Edition for Part no. 01 40 2 911 521 - VI/13

Breakdown assistance Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys tems.

Hazard warning flash ers

The button is located on the speedometer.

Warning triangle

Under the loading edge in the cargo area. To remove, open the two fasteners.

First aid kit Some of the articles contained in the first aid kit have a limited service life. Therefore, check the use-by dates of the contents regularly and re place the items before they expire.

The first aid kit is located in the left side trim on the cargo area floor or under the loading floor.

Roadside Assistance Service availability Roadside Assistance can be reached around the clock in many countries. You can obtain assis tance there in the event of a vehicle break down.

Roadside Assistance A phone number for Roadside Assistance can be displayed, refer to page 142, via the radio.

Jump-starting Notes If the battery is discharged, the engine can be started using the battery of another vehicle and two jumper cables. In the same way, you can help jump-start another vehicle. Only use

Seite 180

Mobility Breakdown assistance

180 Online Edition for Part no. 01 40 2 911 521 - VI/13

jumper cables with fully insulated clamp han dles. To prevent personal injury or damage to both vehicles, adhere strictly to the following proce dure.

Do not touch live parts To avoid the risk of potentially fatal injury,

always avoid all contact with electrical compo nents while the engine is running.

Preparation 1. Check whether the battery of the other ve

hicle has a voltage of 12 volts and approxi mately the same capacitance in Ah. This in formation can be found on the battery.

2. Switch off the engine of the assisting vehi cle.

3. Switch off any electronic systems/power consumers in both vehicles.

Bodywork contact between vehicles There must not be any contact between

the bodies of the two vehicles, otherwise there is a danger of shorting.

Connecting jumper cables Connecting order Connect the jumper cables in the correct

order; otherwise, there is the danger of injury from sparking.

1. Open the battery cover in the engine com partment to access the positive terminal.

2. Unlock the tabs of the positive terminal cover on the left and right, arrows 1, and raise the cover, arrow 2.

3. Attach one terminal clamp of the positive jumper cable to the positive terminal of the battery or to a starting aid terminal of the vehicle providing assistance.

4. Attach the second clamp of the positive jumper cable to the positive terminal of the battery of the vehicle to be started.

5. Attach one terminal clamp of the negative jumper cable to the negative terminal of the battery, or to the corresponding engine or body ground of the vehicle providing as sistance.

6. Attach the second clamp of the negative jumper cable to the negative terminal of

Seite 181

Breakdown assistance Mobility

181Online Edition for Part no. 01 40 2 911 521 - VI/13

the battery, or to the engine or body ground of the vehicle to be started.

Body ground:

Starting the engine Never use spray fluids to start the engine.

1. Start the engine of the assisting vehicle and let it run for several minutes at a slightly in creased idle speed.

2. Start the engine of the vehicle being started in the usual way. If the first starting attempt is not successful, wait a few minutes before making another attempt in order to allow the discharged battery to recharge.

3. Let both engines run for several minutes. 4. Disconnect the jumper cables in the reverse

order. Check the battery and recharge if necessary.

Tow-starting and towing Notes

Observe applicable laws and regulations Observe applicable laws and regulations

for tow-starting and towing.

No additional passengers Do not transport any passengers other

than the driver in a vehicle that is being towed.

Using a tow fitting The screw-in tow fitting must always be carried in the vehicle. It can be screwed in at the front or rear of the MINI. The tow fitting is stowed in the following loca tion, depending on the equipment: Under the right or left front seat. In the pouch of the wheel change set in the

cargo area. Tow fitting, information on use Use only the tow fitting provided with

the vehicle and screw it all the way in. Use the tow fitting for towing on paved

roads only. Avoid lateral loading of the tow fitting, e.g.,

do not lift the vehicle by the tow fitting. Otherwise, damage to the tow fitting and the vehicle can occur.

Access to the screw thread Push out the tow fitting cover at the appropri ate recess in the bumper.

Front

Seite 182

Mobility Breakdown assistance

182 Online Edition for Part no. 01 40 2 911 521 - VI/13

MINI Countryman: rear

MINI Paceman: rear

Being towed Follow the towing instructions Follow all towing instructions, or vehicle

damage or accidents may occur.

Make sure that the ignition is switched on; otherwise, the low beams, tail lamps, turn signals, and windshield wipers may be un available.

Do not tow the vehicle with the rear axle tilted, as the front wheels could turn.

When the engine is stopped, there is no power assist. Consequently, more force needs to be applied when braking and steering.

Larger steering wheel movements are re quired.

Switch on the hazard warning system, de pending on local regulations.

Manual transmission Gearshift lever in neutral position.

Automatic transmission Towing vehicles with an automatic trans mission

Only transport vehicles with an automatic transmission on tow trucks or with raised front wheels; otherwise, the transmission may be damaged.

Towing with a tow bar Light towing vehicle The towing vehicle must not be lighter

than your vehicle, or it will not be possible to control vehicle response.

Correctly attach the tow bar Only secure the tow bar on the tow fit

tings; damage can occur when it is secured on other parts of the vehicle.

The tow fittings used should be on the same side on both vehicles. Should it prove impossible to avoid mounting the tow bar at an offset angle, please observe the following: Clearance and maneuvering capability will

be sharply limited during cornering. The tow bar will generate lateral forces if it

is attached offset.

Towing with a tow rope When starting to tow the vehicle, make sure that the tow rope is taut. To avoid jerking and the associated stresses on the vehicle components when towing, always use nylon ropes or nylon straps.

Attaching the tow rope correctly Only secure the tow rope on the tow fit

ting; otherwise, damage can occur when it is secured on other parts of the vehicle.

Seite 183

Breakdown assistance Mobility

183Online Edition for Part no. 01 40 2 911 521 - VI/13

With a tow truck: vehicles without ALL4 all-wheel drive

Do not lift the vehicle Do not lift the vehicle by the tow fitting or

body and chassis parts; otherwise, damage may result.

MINI Countryman:

MINI Paceman:

Have the vehicle transported with a tow truck with a so-called lift bar or on a flat bed.

With a tow truck: vehicle with ALL4 all- wheel drive

Do not lift the vehicle Do not lift the vehicle by the tow fitting or

body and chassis parts; otherwise, damage may result.

Note for vehicles with ALL4 all-wheel drive

Do not tow a vehicle with ALL4 all-wheel drive with just the front or rear axle raised; other

wise, the wheels could lock up and the transfer case could be damaged.

MINI Countryman:

MINI Paceman:

Only transport the vehicle on a flat-bed.

Tow-starting If possible, do not tow-start the vehicle but start the engine by jump-starting, refer to page 180. Vehicles with a catalytic converter should only be tow-started when the engine is cold; vehicles with an automatic transmission cannot be tow-started.

1. Switch on the hazard warning system and comply with local regulations.

2. Switch on the ignition, refer to page 49. 3. Shift into 3rd gear. 4. Have the vehicle tow-started with the

clutch is depressed and then slowly release the clutch. After the engine starts, immedi ately depress the clutch completely again.

Seite 184

Mobility Breakdown assistance

184 Online Edition for Part no. 01 40 2 911 521 - VI/13

5. Stop at a suitable location, remove the tow bar or rope, and switch off the hazard warning system.

6. Have the vehicle checked.

Seite 185

Breakdown assistance Mobility

185Online Edition for Part no. 01 40 2 911 521 - VI/13

Care Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys tems.

Car washes Notes

Steam jets or high-pressure washers When using steam jets or high-pressure

washers, hold them a sufficient distance away and use a maximum temperature of 140 /60 . Holding them too close or using excessively high pressures or temperatures can cause dam age or preliminary damage that may then lead to long-term damage. Follow the operating instructions for the high- pressure washer.

Do not direct steam or high-pressure washers toward the labels applied by the manufacturer; otherwise, damage may result.

Cleaning sensors/cameras with high-pres sure washers

When using high-pressure washers, do not spray the seals of the retractable hardtop and the exterior sensors and cameras, for Park Dis tance Control, for instance, for extended peri ods of time and only from a distance of at least 12 in/30 cm.

During the winter months Ensure that the vehicle is washed more

frequently in winter. Intense soiling and road salt can damage the vehicle.

After washing the vehicle, apply the brakes briefly to dry them; otherwise, braking action can be reduced and corrosion of the brake discs can occur. Regularly remove foreign bodies, such as leaves, from the area of the windshield when the hood is open.

Washing in automatic car washes Give preference to cloth car washes or those that use soft brushes in order to avoid paint damage. Do not use automatic high-pressure washers; otherwise, water may drip into the interior in the area of the windows. Before driving into the car wash, check whether the system is suitable for your MINI. Note the following points: Vehicle dimensions, refer to page 204. If necessary: fold in the exterior mirrors, re

fer to page 42. Maximum permissible tire width.

Guide rails in car washes Avoid car washes with guide rails higher

than 4 in/10 cm; otherwise, the vehicle chassis could be damaged.

Preparations before driving into the car wash: Unscrew the road antenna. Deactivate the rain sensor to avoid unin

tentional wiper activation. Deactivate the rear window wiper and pro

tect it from damage. Ask the car wash oper ator about any necessary protective meas ures.

Seite 186

Mobility Care

186 Online Edition for Part no. 01 40 2 911 521 - VI/13

Remove additional attachments, for in stance a spoiler or telephone antenna, if there is a risk that these may be damaged.

Insert the remote control into the ignition lock.

Automatic transmission Before driving into the car wash, note the fol lowing to ensure that the vehicle can roll:

1. Insert the remote control into the ignition lock, even with Comfort Access.

2. Move the selector lever to position N. 3. Release the handbrake. 4. Switch the engine off. 5. Leave the remote control in the ignition

lock so that the vehicle can roll.

Hand car wash If washing the vehicle by hand, use copious quantities of water and car shampoo if neces sary. Clean the vehicle with a sponge or a washing brush by applying gentle pressure. Before cleaning the windshield, deactivate the rain sensor to avoid unintentional wiper activa tion or switch off the ignition.

Adhere to the local regulations regarding washing cars by hand.

Headlamps Do not rub dry and do not use abrasive or caus tic cleansers. Soak areas that have been soiled, e.g., due to insects, with shampoo and rinse off with copious quantities of water. Thaw ice with a window deicer; do not use an ice scraper.

Windows Clean the outside and inside surfaces of the windows and the mirror glasses with window cleaner.

Do not clean mirror glass with cleaners contain ing quartz.

Wiper blades Clean with soapy water and replace regularly to avoid streaking. Wax and preservative residue and soiling on the windows cause streaking during window wiping and lead to premature wear on the wiper blades and malfunctions of the rain sen sor.

Vehicle care Car care products Regular cleaning and care contributes signifi cantly to vehicle value retention. The manufacturer recommends using cleaning and care products from MINI, since these have been tested and approved. Original MINI CareProducts have been tested on materials, in the laboratory, and in the field, and offer optimum care and protection for MINI vehicles.

Do not use cleansers that contain alcohol or solvents

Do not use cleansers that contain alcohol or solvents, such as lacquer thinners, heavy-duty grease removers, fuel, or such; this could lead to surface damage.

Car care and cleaning products Follow the instructions on the container.

When cleaning the interior, open the doors or windows. Only use products intended for cleaning vehi cles. Cleansers can contain substances that are dan gerous and harmful to your health.

Seite 187

Care Mobility

187Online Edition for Part no. 01 40 2 911 521 - VI/13

Vehicle paint Regular care contributes to vehicle value reten tion and protects the paintwork against the long-term effects of paint-damaging substan ces. Environmental influences in areas with higher air pollution or natural contaminants, such as tree resin or pollen, can have an impact on the vehicle paint. Therefore, it is important to tailor the frequency and extent of your car care to these influences. Immediately remove especially aggressive sub stances, such as spilled fuel, oil, grease, or bird droppings, to prevent damage to the paint work.

Correcting paint damage Depending on the severity of the damage, re pair stone impact damage or scratches imme diately to prevent rust formation. The manufacturer recommends having paint damage corrected with a professional repair paint job according to factory specifications us ing original MINI paint materials.

Preservation Preservation is needed when water no longer beads off of the clean paint surfaces. Only use paint preservation products that contain car nauba or synthetic waxes.

Leather care The leather processed by the manufacturer is a high quality natural product. Light graininess is a typical feature of natural leather. Particles of dust and road grime chafe in pores and folds, and lead to increased wear and pre mature degradation of the leather surface. Therefore, remove dust from the leather regu larly, using a cloth or vacuum cleaner. Make especially sure that light-colored leather is cleaned regularly as it is more susceptible to soiling.

Twice a year, treat the leather with a leather lo tion as dirt and grease will attack the protective layer of the leather.

Upholstery material care Vacuum regularly with a vacuum cleaner to re move superficial soiling. In case of heavy soiling, e.g., beverage stains, use a soft sponge or lint-free microfiber cloth in combination with a suitable interior cleaner. Follow the instructions on the container. Clean the upholstery material down to the seams using large sweeping motions. Avoid rubbing the material vigorously.

Damage from Velcro fasteners Open Velcro fasteners on pants or other

articles of clothing can damage the seat covers. Ensure that any Velcro fasteners are closed.

Caring for special components

Interior plastic parts These include: Imitation leather surfaces Lamp lenses Indicator covers Matte components Clean with water and a solvent-free plastic cleaner if necessary.

Do not use cleansers that contain alcohol or solvents

Do not use cleansers that contain alcohol or solvents, such as lacquer thinners, heavy-duty grease removers, fuel, or such; this could lead to surface damage.

Rubber seals Only treat with water or a rubber care product. When cleaning rubber seals, do not use silicone sprays or other care products containing sili cone; otherwise, noise and damage may result.

Seite 188

Mobility Care

188 Online Edition for Part no. 01 40 2 911 521 - VI/13

Chrome surfaces Carefully clean components such as the radia tor grille or door handles with an ample supply of water, possibly with shampoo added, partic ularly when they have been exposed to road salt. For additional treatment, use a chrome polish.

Light-alloy wheels When cleaning the wheels on the vehicle, only use a neutral wheel rim cleaner with a pH value of 5 to 9. Do not use abrasive cleaners or a steam jet hot ter than 140 /60 ; otherwise, damage may result. Adhere to the manufacturer instructions. Aggressive, acidic, or alkaline cleaners may de stroy the protective coating of neighboring components such as the brake disc.

Exterior sensors The sensors on the outside of the vehicle, such as for Park Distance Control, must be kept clean and free of ice to ensure that they remain fully functional.

Decorative trim Clean decorative trims and fine wood compo nents with a moist cloth only. Then dry with a soft cloth.

Safety belts Dirty belt straps impede the reeling action and thus have a negative impact on safety.

No chemical cleaning Do not clean chemically; this can destroy

the webbing.

Carpets/floor mats No objects in the area around the pedals Keep floor mats, carpets, and any other

objects out of the area of motion of the pedals; otherwise, the function of the pedals could be impeded while driving

Do not place additional floor mats over existing mats or other objects. Only use floor mats that have been approved for the vehicle and can be properly fixed in place. Ensure that the floor mats are securely fastened again when they are returned after being re moved, such as for cleaning.

Floor mats can be removed for cleaning. If they are very dirty, clean with a microfiber cloth and water or an interior cleaner. To pre vent matting of the carpet, rub back and forth in the direction of travel only.

Displays To clean the displays, such as the radio or dis play elements, use an antistatic microfiber cloth.

Cleaning displays Do not use chemical or household cleans

ers. Keep all fluids and moisture away from the unit. Otherwise, they could affect or damage surfa ces or electrical components. Avoid pressing too hard when cleaning and do not use abrasive materials; otherwise, damage can result.

CD/DVD drives No cleaning CD Do not use cleaning CDs; otherwise, parts

of the drive may become damaged.

Long-term vehicle storage Your service center can advise you on what to consider when storing the vehicle for longer than three months.

Seite 189

Care Mobility

189Online Edition for Part no. 01 40 2 911 521 - VI/13

Indicator/warning lamps Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also

describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys tems.

Overview The indicator and warning lamps can light up in a variety of combinations and colors in display area 1 or 2. The table contains information on causes and how to respond. Note whether a lamp lights up alone or in combination with an other. Some lamps can light up in different col ors. Corresponding distinctions are made in the text.

1 2 Cause How to respond

Turn signal

The high beams/headlamp flasher are switched on.

The front fog lamps are switched on.

The rear fog lamps are switched on.

Fasten safety belts. Fasten safety belt, refer to page 41.

External temperature warning Drive conservatively, refer to page 59.

Lights up briefly: Approx. 2.1 US gal/8 liters of fuel remain in the tank. Remains on: The remaining range is no more than 30 miles/50 km, refer to page 60.

Seite 190

Mobility Indicator/warning lamps

190 Online Edition for Part no. 01 40 2 911 521 - VI/13

1 2 Cause How to respond

The engine refuses to start. Depress the brake or clutch to start the engine, refer to page 50.

The ignition is switched on and driver's door is open.

Switch off the ignition, refer to page 49, or close the driver's door.

The lights are still switched on. Switch off the lights, refer to page 67.

The roadside parking lamps are still on. Switch off the roadside parking lamps, refer to page 68.

A door is open.

The hood is open.

The tailgate is open.

The fuel cap is missing or loose. Make sure that the fuel cap is cor rectly positioned and close it until it clicks audibly. Do not jam the strap between the fuel cap and the vehi cle.

The windshield washer fluid level is too low. Add washer fluid, refer to page 55, as soon as possible.

Lights up in red:

Service is due. Arrange a service appointment. Check the service requirements, re fer to page 169.

Lights up in yellow:

The engine will start the next time the Start/ Stop button is touched, possibly without the brake or clutch being depressed

Seite 191

Indicator/warning lamps Mobility

191Online Edition for Part no. 01 40 2 911 521 - VI/13

1 2 Cause How to respond

The remote control is malfunctioning or, in cars with Comfort Access, was not detected.

The engine cannot be started. Have the remote control checked, if nec essary.

The battery in the remote control is dis charged.

Use the remote control for a longer journey or, in cars with Comfort Ac cess, replace the battery.

The belt tensioners and/or airbag system has failed.

Have the system checked immedi ately. Fasten the safety belts anyway.

Steering assistance has failed. You can continue your journey, but moderate your speed and exercise due caution. Markedly different steering response. Have the system checked as soon as possible.

Lights up in red:

Engine malfunction Stop the car and switch off the en gine. You cannot continue your journey. Contact your service cen ter.

Lights up in yellow:

Full engine power is no longer available. You can continue your journey, but moderate your speed and exercise due caution. Have the engine checked as soon as possible.

Indicator lamp 1 flashes:

Engine malfunction under high load. High engine load will result in damage to the cat alytic converter.

You can continue your journey, but moderate your speed and exercise due caution. Have the vehicle checked immediately.

Indicator lamp 1 lights up:

Engine malfunction with adverse effect on emissions.

You can continue your journey, but moderate your speed and exercise due caution. Have the vehicle checked as soon as possible.

Seite 192

Mobility Indicator/warning lamps

192 Online Edition for Part no. 01 40 2 911 521 - VI/13

1 2 Cause How to respond

Lights up in red:

The engine is overheating. Carefully bring the car to a stop, switch off the engine and allow it to cool down. Do not open the hood; otherwise, there would be a risk of injury due to scalding. Contact your service center.

Lights up in yellow:

The engine is too hot. Continue driving at more moderate speed so that the engine can cool down. Have the engine checked without delay if the situation reoc curs.

Lights up in red:

Battery is no longer being charged. Alterna tor malfunction.

Switch off all unnecessary electrical consumers. Have the power supply system checked without delay.

Lights up in yellow:

The battery charge level is very low, the bat tery is old or is not securely connected.

Charge the battery by taking a long drive or using an external charger. If necessary, switch off automatic power consumers. Have the battery checked as soon as possible.

Indication in US models The handbrake is set.

Indication in Canadian models The handbrake is set.

Indication in US models The handbrake is set while driving.

Release the handbrake.

Indication in Canadian models The handbrake is set while driving.

Release the handbrake.

Seite 193

Indicator/warning lamps Mobility

193Online Edition for Part no. 01 40 2 911 521 - VI/13

1 2 Cause How to respond

Indication in US models

Lights up in red: The brake fluid level is too low.

Reduced braking effect, stop the car carefully. Contact the nearest service center.

Indication in Canadian models

Lights up in red: The brake fluid level is too low.

Reduced braking effect, stop the car carefully. Contact the nearest service center.

Indication in US models.

Brake pads worn. Have the condition of the brake pads checked without delay.

Indication in Canadian models

Brake pads worn. Have the condition of the brake pads checked without delay.

Indication in US models

The vehicle electronics have failed. You cannot continue your journey. Contact your service center.

Indication in Canadian models

The vehicle electronics have failed. You cannot continue your journey. Contact your service center.

Seite 194

Mobility Indicator/warning lamps

194 Online Edition for Part no. 01 40 2 911 521 - VI/13

1 2 Cause How to respond

Lights up in red: Have the system in question checked immediately.

The starter has failed or The engine cannot be restarted.

Ignition malfunctioning. The engine can only be restarted when the brake is de pressed or Lighting system failed. Low beams/tail lamps and brake lights still operational. All other lamps failed.

Depress the brake to restart the en gine.

Lights up in yellow:

Brake light control failed or The fuel supply is malfunctioning.

You can continue your journey, but moderate your speed and exercise due caution. Have the system in question checked immediately.

Drive malfunctioning. You can continue your journey, but moderate your speed and exercise due caution. Transmission limp- home program with reduced accel eration is active. Have the system checked immediately.

Flashing: Dynamic Stability Control DSC or Dynamic Traction Control DTC is controlling drive and braking forces, refer to page 81.

Dynamic Traction Control DTC is activated, refer to page 82.

Dynamic Stability Control DSC and Dynamic Traction Control DTC are deactivated, refer to page 81.

Driving stability limited during ac celeration and cornering. Driving style must be readjusted.

Dynamic Stability Control DSC and Dynamic Traction Control DTC failed.

Driving stability limited during ac celeration and cornering. You can continue your journey, but moderate your speed and exercise due caution. Have the system checked as soon as possible.

Seite 195

Indicator/warning lamps Mobility

195Online Edition for Part no. 01 40 2 911 521 - VI/13

1 2 Cause How to respond

ALL4 all-wheel drive failed. It is possible to continue driving. Drive cautiously and defensively. Avoid operating on poor roads and using the full throttle and kickdown positions of the accelerator. Have the system checked immediately.

ALL4 all-wheel drive and DSC failed. It is possible to continue driving. Drive cautiously and defensively. Avoid operating on poor roads and using the full throttle and kickdown positions of the accelerator. Have the system checked immediately.

Indication in US models

The driving stability control systems includ ing ABS and the Tire Pressure Monitor dis play have failed, refer to page 81.

Reduced braking and driving stabil ity. Drive cautiously and defen sively. Avoid full brake application, operation on poor roads, and use of the full throttle and kickdown positions of the accelerator. Have the system checked immediately.

Indication in US models

The driving stability control systems includ ing ABS, ALL4 all-wheel drive, and the Tire Pressure Monitor display have failed, refer to page 81.

Reduced braking and driving stabil ity. Drive cautiously and defen sively. Avoid full brake application, operation on poor roads, and use of full throttle and kickdown posi tions of the accelerator. Have the system checked immediately.

Seite 196

Mobility Indicator/warning lamps

196 Online Edition for Part no. 01 40 2 911 521 - VI/13

1 2 Cause How to respond

Indication in Canadian models

The driving stability control systems includ ing ABS and the Flat Tire Monitor or the Tire Pressure Monitor have failed, refer to page 81.

Reduced braking and driving stabil ity. Drive cautiously and defen sively. Avoid full brake application, operation on poor roads, and use of full throttle and kickdown posi tions of the accelerator. Have the system checked immediately.

Indication in Canadian models

The driving stability control systems includ ing ABS, ALL4 all-wheel drive, and the Flat Tire Monitor or the Tire Pressure Monitor have failed, refer to page 81.

Reduced braking and driving stabil ity. Drive cautiously and defen sively. Avoid full brake application, operation on poor roads, and use of full throttle and kickdown posi tions of the accelerator. Have the system checked immediately.

In vehicles with the Flat Tire Monitor

Light up in yellow and red:

A tire is deflated. Carefully bring the car to a stop. Additional information, refer to page 75.

The Flat Tire Monitor was not initialized. Initialize the Flat Tire Monitor, refer to page 75.

Light up in yellow:

Flat Tire Monitor failed. Punctures are not indicated.

Have the system checked.

Seite 197

Indicator/warning lamps Mobility

197Online Edition for Part no. 01 40 2 911 521 - VI/13

1 2 Cause How to respond

In vehicles with the Tire Pressure Monitor

Light up in yellow and red:

There is a flat tire or substantial loss of tire pressure.

Carefully bring the car to a stop. Additional information, refer to page 77.

In vehicles with the Tire Pressure Monitor

Light up in yellow:

Tire Pressure Monitor not initialized. Check the inflation pressure and re set the system, refer to page 77.

The small lamp flashes yellow and then stays on, the large lamp lights up in yellow:

Tire Pressure Monitor failed. Punctures are not indicated.

Have the system checked.

A wheel without TPM electronics is mounted.

Have the system checked.

TPM is temporarily malfunctioning due to other systems or devices using the same radio frequency.

In vehicles with the Tire Pressure Monitor

The small lamp flashes yellow and then stays on, the large lamp lights up in yellow:

Tire Pressure Monitor failed. Punctures are not indicated.

Have the system checked.

A wheel without TPM electronics is mounted.

Have the system checked.

Lights up in red:

Transmission limp-home program active with restricted range of gears, possibly with reduced acceleration.

You can continue your journey, but moderate your speed and exercise due caution. Have the system checked immediately.

Seite 198

Mobility Indicator/warning lamps

198 Online Edition for Part no. 01 40 2 911 521 - VI/13

1 2 Cause How to respond

Gears can be engaged without depressing the brake.

Always depress the brake to en gage a gear.

Automatic selector lever locked: Manually unlock the selector lever lock, refer to page 58.

Lights up in yellow: Have the system checked as soon as possible.

Automatic selector lever locked: The selector lever is locked in position P with the engine running or the ignition switched on and the brake depressed or

Manually unlock the selector lever lock, refer to page 58.

The brake signal is malfunctioning: a gear can be engaged without depressing the brake.

To engage a gear while the vehicle is at a standstill, always depress the brake. Before leaving the vehicle, move the selector lever to position P and switch off the engine.

Lights up in red:

The transmission is overheating. Bring the car to a stop and move the selector lever to position P. Al low the transmission to cool down. You can continue your journey, but moderate your speed and exercise due caution. Have the system checked if the situation reoccurs.

Lights up in yellow:

The transmission is too hot. Avoid high engine loads. You can continue your journey, but moder ate your speed and exercise due caution.

Selector lever position P not engaged. The vehicle is not secured against rolling.

Selector lever position P not engaged. The ignition cannot be switched off.

Engage selector lever position P when you wish to switch off the ig nition, refer to page 49.

Seite 199

Indicator/warning lamps Mobility

199Online Edition for Part no. 01 40 2 911 521 - VI/13

1 2 Cause How to respond

The cruise control system has failed. Have the system checked.

The Park Distance Control has failed. Have the system checked.

A bulb of the exterior lighting system has failed.

Have the exterior lighting checked as soon as possible.

A low-beam headlamp or front fog lamp has failed.

Have the lights checked as soon as possible.

A high-beam headlamp has failed. Have the high-beam headlamps checked.

A rear fog lamp has failed. Have the rear fog lamps checked.

The headlamp beam throw adjustment has failed.

Have the headlamp beam throw adjustment system checked.

The Adaptive Light Control has failed.

The coolant level is too low. Add coolant immediately, refer to page 168.

The engine oil pressure is too low. Stop immediately and switch off the engine. You cannot continue your journey. Contact your service center.

Lights up in red:

The service appointment is overdue. Arrange a service appointment. Check the service requirements, re fer to page 64.

Lights up in yellow:

Service is due. Arrange a service appointment. Check the service requirements, re fer to page 64.

Seite 200

Mobility Indicator/warning lamps

200 Online Edition for Part no. 01 40 2 911 521 - VI/13

1 2 Cause How to respond

No service due.

The set speed limit was exceeded.

The time and date are no longer correct. Set the time and date, refer to page 63.

Seite 201

Indicator/warning lamps Mobility

201Online Edition for Part no. 01 40 2 911 521 - VI/13

FIND ME.

Online Edition for Part no. 01 40 2 911 521 - VI/13

At a glance

Controls

Driving tips

Entertainment

Communication

Mobility

Reference

Online Edition for Part no. 01 40 2 911 521 - VI/13

Technical data Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also

describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys tems.

Engine specifications

Cooper Cooper S John Cooper Works

Displacement cu in/cm 97.5/1,598 97.5/1,598 97.5/1,598

No. of cylinders 4 4 4

Maximum output hp 121 181 208

at engine speed rpm 6,000 5,500 6,000

Maximum torque lb ft/Nm 114/155 177/240 207/280

with overboost 192/260 221/300

at engine speed rpm 4,250 1,600-5,000 1,900-5,500

with overboost 1,700-4,500 2,100-4,500

Overboost briefly increases the highest torque during rapid acceleration, for example when pass ing another vehicle.

Dimensions MINI Countryman

MINI Countryman Cooper Cooper S John Cooper Works

Width with mirrors inches/mm 78.5/1,995 78.5/1,995 78.6/1,996

Width without mirrors inches/mm 70.4/1,789 70.4/1,789 70.4/1,789

Height without roof antenna inches/mm 61.5/1,561 61.5/1,561 61.5/1,561

Length inches/mm 161.7/4,108 161.8/4,110 163.2/4,144

Seite 204

Reference Technical data

204 Online Edition for Part no. 01 40 2 911 521 - VI/13

MINI Countryman Cooper Cooper S John Cooper Works

Wheelbase inches/mm 102.2/2,595 102.2/2,595 102.2/2,596

Smallest turning circle dia. ft/m 38.1/11.6 38.1/11.6 38.1/11.6

MINI Paceman

MINI Paceman Cooper Cooper S John Cooper Works

Width with mirrors inches/mm 78.6/1,996 78.6/1,996 78.6/1,996

Width without mirrors inches/mm 70.3/1,786 70.3/1,786 70.3/1,786

Height without roof antenna inches/mm 59.8/1,518 59.9/1,522 60.1/1,527

Length inches/mm 162.2/4,120 162.2/4,120 162.8/4,134

Wheelbase inches/mm 102.2/2,596 102.2/2,596 102.2/2,596

Smallest turning circle dia. ft/m 38.1/11.6 38.1/11.6 38.1/11.6

Weights Never exceed either the approved axle loads or the gross vehicle weight.

MINI Countryman

Cooper Cooper S

Curb weight, road ready, with maximum special equipment

Manual transmission lbs/kg 2,954/1,340 3,053/1,385

Automatic transmission lbs/kg 3,020/1,370 3,097/1,405

Approved gross vehicle weight

Manual transmission lbs/kg 3,858/1,750 3,990/1,810

Automatic transmission lbs/kg 3,924/1,780 4,034/1,830

Load lbs/kg 860/390 860/390

Approved front axle load

Manual transmission lbs/kg 2,050/930 2,127/965

Automatic transmission lbs/kg 2,116/960 2,172/985

Approved rear axle load lbs/kg 1,918/870 1,918/870

Seite 205

Technical data Reference

205Online Edition for Part no. 01 40 2 911 521 - VI/13

Cooper Cooper S

Approved roof load capacity lbs/kg 165/75 165/75

Cargo area capacity cu ft/liter 12.441.3/ 3501,170 12.441.3/ 3501,170

Cooper S ALL4 John Cooper Works

Curb weight, road ready, with maximum special equipment

Manual transmission lbs/kg 3,208/1,455 3,263/1,480

Automatic transmission lbs/kg 3,252/1,475 3,307/1,500

Approved gross vehicle weight

Manual transmission lbs/kg 4,101/1,860 4,156/1,885

Automatic transmission lbs/kg 4,145/1,880 4,200/1,905

Load lbs/kg 860/390 860/390

Approved front axle load

Manual transmission lbs/kg 2,183/990 2,183/990

Automatic transmission lbs/kg 2,227/1,010 2,227/1,010

Approved rear axle load lbs/kg 2,017/915 2,072/940

Approved roof load capacity lbs/kg 165/75 165/75

Cargo area capacity cu ft/liter 12.441.3/ 3501,170 12.441.3/ 3501,170

MINI Paceman

Cooper Cooper S Cooper S ALL4 John Cooper Wor ks

Curb weight, road ready, with maximum special equipment

Manual transmission lbs/kg 2,940/1,334 3,070/1,393 3,210/1,456 3,260/1,479

Automatic transmis sion

lbs/kg 3,010/1,365 3,110/1,411 3,260/1,479 3,310/1,501

Approved gross vehicle weight

Manual transmission lbs/kg 3,850/1,746 3,960/1,796 4,100/1,860 4,150/1,882

Automatic transmis sion

lbs/kg 3,920/1,778 4,010/1,819 4,140/1,878 4,200/1,905

Load lbs/kg 850/386 850/386 850/386 850/386

Seite 206

Reference Technical data

206 Online Edition for Part no. 01 40 2 911 521 - VI/13

Cooper Cooper S Cooper S ALL4 John Cooper Wor ks

Approved front axle load

Manual transmission lbs/kg 2,050/930 2,120/962 2,180/989 2,200/998

Automatic transmis sion

lbs/kg 2,120/962 2,170/984 2,220/1,007 2,240/1,016

Approved rear axle load

lbs/kg 1,910/866 1,910/866 2,020/916 2,060/934

Approved roof load ca pacity

lbs/kg 165/75 165/75 165/75 165/75

Cargo area capacity cu ft/ liter

11.638.1/ 3301,080

11.638.1/ 3301,080

11.638.1/ 3301,080

11.638.1/ 3301,080

Capacities

Notes

Fuel tank US gal/liters Approx. 12.4/ approx. 47

Fuel quality, refer to page 150

Including reserve of US gal/liters Approx. 2.1/ approx. 8

Seite 207

Technical data Reference

207Online Edition for Part no. 01 40 2 911 521 - VI/13

Everything from A to Z Index A ABS, Antilock Brake Sys

tem 81 Acoustic signal, refer to Check

Control 65 Activated charcoal filter with

automatic climate con trol 91

Adaptive Light Control 69 Additives, engine oil 167 Airbags 72 Airbags, indicator/warning

light 75 Air circulation, refer to Recir

culated air mode 88, 90 Air conditioner 87 Air conditioning 87 Air conditioning mode Air conditioner 87 Automatic climate con

trol 89 Air distribution Automatic 90 Individual 88 Manual 88, 90 Air drying, refer to Cooling

function 91 Air flow rate 87, 90 Air pressure, refer to Tire infla

tion pressure 152 Air supply Air conditioner 87 Automatic climate con

trol 89 Alarm system 32 Alarm system Avoiding unintentional

alarms 32 Interior motion sensor 32 Tilt alarm sensor 32 ALL4 all-wheel system 83

All-wheel drive, refer to ALL4 83

Alternating-code hand-held transmitter 93

Ambient lighting 71 Antifreeze, washer fluid 55 Antilock Brake System,

ABS 81 Anti-slip control, refer to Dy

namic Stability Control DSC 81

Anti-theft protection 23 Approved engine oils 167 Ashtray 96 Assistance, roadside 180 Assistance when driving off,

refer to Hill drive-off assis tant 83

Assistance with starting en gine, refer to Jump-start ing 180

Automatic Air distribution 90 Air flow rate 90 Automatic car wash 186 Automatic climate control Automatic air distribution 90 Automatic, cruise control 84 Automatic headlamp con

trol 67 Automatic transmission with Steptronic Kickdown 57 Overriding selector lever

lock 58 AUTO program with auto

matic climate control 90 AUX-IN port 130 Average fuel consumption 61 Average fuel consumption Setting the units 62

Average speed 61 Average speed, refer to Com

puter 60

B Backrest curvature, refer to

Lumbar support 37 Backrests, refer to Seats 36 Backup lamps, bulb replace

ment 175 Battery Disposal 32 Remote control 22 Battery, refer to Vehicle bat

tery 178 Battery replacement Remote control 32 Belts, refer to Safety belts 38 Belt tensioners, refer to Safety

belts 38 Bi-xenon headlamps 172 Blower, refer to Air flow

rate 87, 90 Brake assistant 81 Brake discs, breaking in 110 Brake fluid, refer to Service re

quirements 64 Brake force distribution, elec

tronic 81 Brake pads, breaking in 110 Brakes Handbrake 51 Brakes, MINI maintenance

system 169 Brakes, service require

ments 64 Brake system, MINI mainte

nance system 169 Braking, notes 111

Seite 208

Reference Everything from A to Z

208 Online Edition for Part no. 01 40 2 911 521 - VI/13

Breakdown assistance, Road side Assistance 180

Breaking in 110 Buckle tongue, rear Height adjustment 39 Button for starting the engine,

refer to Start/Stop button 49

C California Proposition 65

Warning 7 Car battery, refer to Vehicle

battery 178 Car care products 187 Care, displays 189 Care, vehicle 187 Cargo area Comfort Access 30 Flat loading floor 99 Multi-function hook 101 Opening from the out

side 28 Partition net 100 Cargo area, enlarging Cargo cover 98 Cargo area lamp, refer to Inte

rior lamps 70 Cargo area tailgate, refer to

Tailgate 28 Car horn, refer to Horn 14 Carpet, care 189 Car phone, refer to Tele

phone 136 Car wash 186 CBC, Cornering Brake Con

trol 81 CBS Condition Based Serv

ice 169 CD/DVD drives, care 189 Center armrest 103 Center console, refer to

Around the center con sole 17

Center rail 104 Center rail, refer to Storage

compartments 104

Central locking Comfort Access 30 From the inside 27 From the outside 24 Central locking system Concept 23 From the outside 23 Changes, technical, refer to

Safety 7 Changing wheels/tires 159 Check Control 65 Children, transporting 44 Child restraint fixing system

LATCH 45 Child restraint fixing sys

tems 44 Child restraint fixing systems,

mounting 44 Child seat, mounting 44 Child seats, refer to Transport

ing children safely 44 Chrome parts, care 189 Circulation of air, refer to Re

circulated air mode 88, 90 Cleaning, displays 189 Cleaning, refer to Care 186 Climate 87 Climate mode Ventilation 91 Clock 59 Clock 12h/24h format 62 Closing From the inside 27 From the outside 24 Clutch, breaking in 110 Cockpit 14 Cold start, refer to Starting the

engine 50 Combination instrument, refer

to Displays 16 Combination switch, refer to

Turn signal/high beams/ headlamp flasher 52

Combination switch, refer to Washer/wiper system 53

Comfort Access In the car wash 31 Replacing the battery 32 Comfort area, refer to Around

the center console 17 Compartment for remote con

trol, refer to Ignition lock 49 Compass, digital 94 Computer 60 Computer, displaying informa

tion 60 Condition Based Service

CBS 169 Confirmation signals for vehi

cle locking/unlocking 25 Consumption, refer to Aver

age fuel consumption 61 Control Display, care 189 Controls and displays 14 Control systems, driving stabil

ity 81 Convenient operation Windows 25 Coolant temperature 60 Cooling function, switching on

and off 91 Cooling, maximum 90 Cornering Brake Control,

CBC 81 Corrosion on brake discs 112 Cradle for telephone or mobile

phone, refer to Snap-in adapter 143

Cruise control 84 Cupholders 96 Current fuel consumption 61 Curve lights, refer to Adaptive

Light Control 69 Cylinders, number of, refer to

Engine data 204

D Dashboard lighting, refer to

Instrument lighting 70 Dashboard, refer to Cock

pit 14

Seite 209

Everything from A to Z Reference

209Online Edition for Part no. 01 40 2 911 521 - VI/13

Dashboard, refer to Dis plays 16

Data, technical 204 Date Display format 62 Setting 63 Daytime running lights 68 Decorative trim, care 189 Defogging windows 88 Defroster Rear window 88, 91 Defrosting windows 88 Defrost setting, refer to De

frosting windows 88 Digital compass 94 Dip stick, engine oil 166 Directional indicators, refer to

Turn signals 52 Displacement, refer to Engine

data 204 Display lighting, refer to In

strument lighting 70 Displays 16 Displays and controls 14 Displays, care 189 Displays, cleaning 189 Displays, refer to Instrument

cluster 16 Disposal Remote control battery 32 Distance warning, refer to

Park Distance Control PDC 85

Door key, refer to Remote control with integrated key 22

Door lock 26 Door lock, confirmation sig

nals 25 Doors, manual operation 27 Doors, unlocking and locking Confirmation signals 25 From the inside 27 From the outside 24 DOT Quality Grades 156 Drive-off assistant, refer to Hill

drive-off assistant 83

Driving notes, breaking in 110

Driving off on hills, refer to Hill drive-off assistant 83

Driving on poor roads 113 Driving stability control sys

tems 81 Driving tips, refer to Driving

notes 110 Dry air, refer to Cooling func

tion 91 DSC Dynamic Stability Con

trol 81 DTC Dynamic Traction Con

trol 82 Dynamic Stability Control

DSC 81 Dynamic Traction Control

DTC 82

E Electrical malfunction Door lock 27 Fuel filler flap 148 Electronic brake-force distri

bution 81 Electronic Stability Program

ESP, refer to Dynamic Stabil ity Control DSC 81

Emergency activation Automatic transmission, re

fer to Overriding selector lever lock 58

Emergency operation, fuel filler flap, unlocking man ually 148

Emergency operation, refer to Manual operation Door lock 27 Energy, saving, refer to Saving

fuel 118 Engine, breaking in 110 Engine compartment 164 Engine oil, adding 166 Engine oil, additives, refer to

Approved engine oils 167

Engine oil, alternative oil types 167

Engine oil change intervals, refer to Service require ments 64

Engine oil, dip stick 166 Engine oil, filling capacity 207 Engine oil, MINI maintenance

system 169 Engine oil types, alterna

tive 167 Engine oil types, ap

proved 167 Engine, overheating, refer to

Coolant temperature 60 Engine power, refer to Engine

data 204 Engine, RPM 204 Engine start, assistance 180 Engine, starting 50 Engine, starting Comfort Access 30 Engine, starting, Start/Stop

button 49 Engine, stopping, Start/Stop

button 49 Engine, switching off 51 Equipment, interior 92 ESP Electronic Stability Pro

gram, refer to Dynamic Sta bility Control DSC 81

Exchanging wheels/tires 159 Exterior mirrors 42 Exterior mirrors, adjusting 42 Exterior mirrors, folding in and

out 42 Exterior sensors, care 189 External temperature dis

play 59 External temperature display Changing the units 62 On the computer 62 External temperature warn

ing 59 Externel temperature dis

play 59

Seite 210

Reference Everything from A to Z

210 Online Edition for Part no. 01 40 2 911 521 - VI/13

F Failure messages, refer to

Check Control 65 False alarm, refer to Avoiding

unintentional alarms 32 Fastening safety belts, refer to

Safety belts 38 Fault messages, refer to Check

Control 65 Filling capacities 207 Filter Refer to Activated-charcoal

filter 89 Refer to Microfilter 89 Refer to Microfilter/acti

vated-charcoal filter with automatic climate control 91

First aid kit 180 First aid, refer to First aid

kit 180 Flashing when locking/unlock

ing 25 Flat tire Flat Tire Monitor 76 Indicator/warning lamp 76 Run-flat tire 76 Tire Pressure Monitor

TPM 77 Flat Tire Monitor FTM 75 Flat Tire Monitor FTM Flat tire message 76 Initializing the system 75 Limits of the system 75 Snow chains 75 Flat tire, wheel change 177 Floor mats, care 189 Fog lamps 70 Foot brake 111 Footwell lamps, refer to Inte

rior lamps 70 Four-wheel drive, refer to

ALL4 83 Front airbags 72 Front fog lamp, bulb replace

ment 173 Front fog lamps 70

Front lamps, bulb replace ment 173

Front passenger airbags, de activating 73

FTM Flat Tire Monitor 75 Fuel 150 Fuel Refer to Average fuel con

sumption 61 Fuel, additives 150 Fuel, average consump

tion 61 Fuel cap, closing 148 Fuel consumption display Average fuel consump

tion 61 Fuel filler flap, closing 148 Fuel filler flap, opening 148 Fuel filler flap, unlocking in

case of an electrical malfunc tion 148

Fuel gauge 60 Fuel, saving 118 Fuel tank capacity, refer to

Filling capacities 207 Fuel tank contents, refer to

Filling capacities 207 Fuel tank, refer to Filling ca

pacities 207 Fuse 178

G Garage door opener, refer to

Universal garage door opener 92

Gasoline 150 Gasoline gauge, refer to Fuel

gauge 60 Gasoline quality 150 Gear change Automatic transmission with

Steptronic 57 Gear display, automatic trans

mission with Steptronic 56 Glass sunroof, electrical 32

Glass sunroof, electrical Convenient operation 25 Opening, closing 33 Raising 33 Remote control 25

H Halogen headlamps, bulb re

placement 173 Hand car wash, care 187 Hand-held transmitter, alter

nating code 93 Hands-free microphone 17 Hazard warning system 17 Head airbags 72 Headlamp control, auto

matic 67 Headlamp courtesy delay fea

ture 69 Headlamp flasher 52, 68 Headlamps 67 Headlamps, care 187 Headlamps, cleaning, washer

fluid 55 Head restraints 41 Head restraints Adjusting the height 41 Removing 41 Heatable Windshield 91 Heating Rear window 88, 91 Seats 38 Windshield 91 Height adjustment Seats 36 High beams 68 High beams, bulb replace

ment 173 Hill drive-off assistant 83 Hills 112 Holder for remote control, re

fer to Ignition lock 49 Homepage 6 Hood 164 Hood, closing 165

Seite 211

Everything from A to Z Reference

211Online Edition for Part no. 01 40 2 911 521 - VI/13

Hood, opening 165 Hood, unlocking 165 Horn 14 Hydraulic brake assistant 81

I Ice warning, refer to External

temperature warning 59 Icy roads, refer to External

temperature warning 59 Identification marks, run-flat

tires 160 Identification marks, tires 156 Ignition 49 Ignition key position 1, refer

to Radio ready state 49 Ignition key position 2, refer

to Ignition on 49 Ignition key, refer to Remote

control with integrated key 22

Ignition lock 49 Ignition, switched off 50 Ignition, switched on 49 Indicator and warning

lamps 17 Indicator and warning lamps Tire Pressure Monitor

TPM 78 Indicator and warning lamps,

overview 190 Individual air distribution 88 Inflation pressure monitor, re

fer to Flat Tire Monitor 75 Inflation pressure monitor, re

fer to Tire Pressure Monitor TPM 77

Inflation pressure, refer to Tire inflation pressure 152

Initializing Compass, refer to Calibrat

ing 95 Glass sunroof, electrical 33 Initializing, Flat Tire Monitor

FTM 75

Instrument cluster, refer to Displays 16

Instrument lighting 70 Instruments, refer to Cock

pit 14 Integrated key 22 Interior equipment 92 Interior lamps 70 Interior lamps Remote control 26 Interior mirror 43 Interior rearview mirror, com

pass 94 Interior temperature, setting Air conditioner 87 Automatic climate con

trol 89 Internet page 6

J Jump-starting 180

K Keyless Go, refer to Comfort

Access 30 Keyless opening and closing,

refer to Comfort Access 30 Key Memory, refer to Personal

Profile 22 Key, refer to Remote control

with integrated key 22 Kickdown Automatic transmission with

Steptronic 57 Knee airbag 72 Knocking control 150

L Lamp and bulb replacement,

bulb replacement 172 Lamp, replacing, refer to

Lamp and bulb replace ment 172

Lamps 67

Lamps, automatic headlamp control 67

Lamps, parking lamps/low beams 67

Lap-and-shoulder belt, refer to Safety belts 38

LATCH child restraint fixing system 45

Leather, care 188 Leather care 188 LEDs, light-emitting di

odes 172 License plate lamp, bulb re

placement 175 Light-alloy wheels, care 189 Light-emitting diodes,

LEDs 172 Lighter Socket 96 Lighting Instruments 70 Lighting, lamp and bulb re

placement 172 Lighting, vehicle, refer to

Lamps 67 Light switch 67 Lock buttons on doors, refer

to Locking 27 Locking From the inside 27 From the outside 25 Setting the confirmation sig

nal 25 Without remote control, re

fer to Comfort Access 30 Locking, vehicle From the inside 27 From the outside 24 Longlife oils, alternative oil

types 167 Longlife oils, refer to Ap

proved engine oils 167 Low beams 67 Low beams Automatic 67 Low beams, automatic 67

Seite 212

Reference Everything from A to Z

212 Online Edition for Part no. 01 40 2 911 521 - VI/13

Low beams, bulb replace ment 173

Lower back support, refer to Lumbar support 37

Lumbar support 37

M Main inspection, refer to Serv

ice requirements 64 Maintenance, refer to Service

booklet Maintenance, refer to Service

requirements 64 Maintenance require

ments 169 Maintenance system

MINI 169 Malfunction Automatic transmission with

Steptronic 58 Door lock 27 Fuel filler flap 148 Malfunction warnings, refer to

Check Control 65 Manual air distribution 88, 90 Manual mode, automatic

transmission with Step tronic 57

Manual operation Door lock 27 Selector lever lock, auto

matic transmission 58 Manual operation, fuel filler

flap 148 Manual transmission 56 Marking on approved

tires 159 Maximum cooling 90 Maximum speed, winter

tires 160 Microfilter 89 Microfilter With automatic climate con

trol 91 MINI Homepage 6 MINI Internet page 6

MINI maintenance sys tem 169

MINI Mobility System 161 Minimum tread, tires 158 Mirrors 42 Mirrors, folding in and out 42 Mirrors, interior mirror 43 Mobile communication devi

ces in the vehicle 111 Mobile phone, refer to Tele

phone 136 Mobility System 161 Modifications, technical, refer

to Safety 7 Mounting of child restraint fix

ing systems 44

N Neck restraints, refer to Head

restraints 41 New wheels and tires 159 Notes 6 Nozzles, refer to Ventila

tion 91

O OBD Onboard Diagnos

tics 170 OBD socket, refer to Socket

for OBD Onboard Diagno sis 170

Octane number, refer to Fuel quality 150

Octane rating, refer to Gaso line quality 150

Odometer 59 Oil additives 167 Oil level 166 Oil types, alternative 167 Oil types, approved 167 Onboard Diagnostics

OBD 170

Opening and closing Comfort Access 30 From the inside 27 From the outside 24 Using the door lock 26 Via the remote control 24 Opening and unlocking From the inside 27 Outside air mode Automatic climate con

trol 90 Outside air, refer to Recircu

lated air mode 88, 90 Overheating of engine, refer

to Coolant temperature 60

P Park Distance Control PDC 85 Parking aid, refer to Park Dis

tance Control PDC 85 Parking assistant, refer to Park

Distance Control PDC 85 Parking brake, refer to Hand

brake 51 Parking lamp, bulb replace

ment 173 Parking lamps 67 Parking lamps/low beams 67 PDC Park Distance Control 85 Personal Profile 22 Pinch protection Windows 34 Plastic, care 188 Pollen Refer to Microfilter 89 Refer to Microfilter/acti

vated-charcoal filter 89 Refer to Microfilter/acti

vated-charcoal filter with automatic climate control 91

Poor road operation 113 Power, refer to Engine

data 204 Power windows 34 Power windows, refer to Win

dows 33

Seite 213

Everything from A to Z Reference

213Online Edition for Part no. 01 40 2 911 521 - VI/13

Prescribed engine oils, refer to Approved engine oils 167

Pressure monitoring of tires, refer to Tire Pressure Monitor TPM 77

Pressure, tires 152 Pressure warning, tires 75 Profile depth, refer to Mini

mum tread depth 158 Profile, tires 157 Protective function, refer to Pinch protection Windows 34

R Radio MINI Boost CD 122 Radio-operated key, refer to

Remote control with integrated key 22

Radio ready state 49 Radio ready state, switched

off 50 Radio ready state, switched

on 49 Radio setting, refer to Radio

ready state 49 Rain sensor 53 Range 61 Rear 37 Rear fog lamp, bulb replace

ment 175 Rear lamps, refer to Tail

lamps 175 Rear seat backrests, folda

ble 98, 99 Rearview mirror, refer to Mir

rors 42 Rear window defroster 88, 91 Rear window, washing 55 Rear window wiper 55 Recirculated air mode 88, 90 Recommended tire

brands 159 Releasing, refer to Unlock

ing 30

Remaining range for service, refer to Service require ments 64

Remaining range, refer to Range 61

Remote control Battery replacement 32 Comfort Access 30 Malfunctions 26, 31 Remote control, removing

from the ignition lock 49 Remote control, service

data 169 Remote control, universal 92 Replacement remote con

trol 22 Replacing wheels/tires 159 Reporting safety defects 9 Reserve warning, refer to Fuel

gauge 60 Reservoir for washer fluid, re

fer to Washer fluid reser voir 55

Restraining systems Refer to Safety belts 38 Restraint systems for chil

dren 44 Retreaded tires 159 Reverse gear, manual trans

mission 56 Roadside Assistance 180 Roadside parking lamp, bulb

replacement 173 Roadside parking lamps 68 RON gasoline quality 150 RON, refer to Fuel quality 150 RPM, refer to Engine data 204 Rubber seals, care 188 Run-flat tires 160 Run-flat tires Flat tire 76 Run-flat tires, tire inflation

pressure 152 Running lights, refer to Park

ing lamps/low beams 67

S Safe braking 111 Safety 7 Safety belts 38 Safety belts Damage 41 Rear center safety belt 39 Safety belts, care 189 Safety belts, indicator/warning

lamp 41 Safety belts, reminder 41 Safety systems Safety belts 38 Safety systems, airbags 72 Saving fuel 118 Seat adjustment 37 Seat adjustment Manual 36 Seat belts Refer to Safety belts 38 Seat heating 38 Seats Adjusting 36 Heating 38 Sitting safely 36 Selector lever, automatic

transmission with Step tronic 57

Selector lever lock, overrid ing 58

Selector lever lock, refer to Changing selector lever posi tions, Shiftlock 57

Selector lever positions, auto matic transmission with Steptronic 57

Service and warranty 8 Service data in the remote

control 169 Service interval display, refer

to Condition Based Service CBS 169

Service interval display, refer to Service requirements 64

Service requirements 64

Seite 214

Reference Everything from A to Z

214 Online Edition for Part no. 01 40 2 911 521 - VI/13

Service requirements, CBS Condition Based Service 169

Settings Clock, 12h/24h format 62 Settings and information 61 Settings, configuring, refer to

Personal Profile 22 Shifting Automatic transmission with

Steptronic 57 Shifting, manual transmis

sion 56 Shift lever Automatic transmission with

Steptronic 57 Shift paddles on the steering

wheel 58 Side airbags 72 Side windows, refer to Win

dows 33 Sliding/tilting sunroof Refer to Glass sunroof, elec

trical 32 Slot for remote control 49 Snap-in adapter, mobile

phone 143 Socket, OBD Onboard Diagno

sis 170 Special equipment, series

equipment 6 Speed, average 61 Speedometer 16 Speed, with winter tires 160 Sport button 83 Sport program, automatic

transmission with Step tronic 57

Stability control systems 81 Start/Stop button 49 Start/Stop button, starting the

engine 50 Start/Stop button, switching

off the engine 51 Starting the engine 50 Start problems, refer to Jump-

starting 180 Steering wheel 43

Steering wheel Shift paddles 58 Steering wheel, adjusting 43 Steering wheel lock 49 Stopping, engine 51 Storage, tires 160 Storing the vehicle 189 Summer tires, refer to Wheels

and tires 152 Summer tires, tread 157 Switches, refer to Cockpit 14 Switching off, engine 51 Switching off, vehicle 51 Symbols 6

T Tachometer 60 Tailgate 28 Tailgate Comfort Access 30 Opening/closing 28 Opening from the out

side 28 Tail lamps 175 Tank gauge, refer to Fuel

gauge 60 Technical changes, refer to

Safety 7 Technical data 204 Telephone 136 Temperature Air conditioner 88 Automatic climate con

trol 90 Temperature, coolant, refer to

Coolant temperature 60 Temperature display External temperature 59 External temperature warn

ing 59 Setting the units 62 Temperature warning 59 Theft alarm system, refer to

Alarm system 32 Time Setting the time 63

Tire age 158 Tire identification marks 156 Tire inflation pressure 152 Tire inflation pressure Pressure loss 76 Tire pressure monitor, refer to

Flat Tire Monitor 75 Tire Pressure Monitor TPM System limits 77 System reset 78 Warning lamp 78 Tire Quality Grading 156 Tires Flat tire 76 Inflation pressure 152 Inflation pressure loss 78 Pressure monitoring, refer to

Tire Pressure Monitor TPM 77

Tires, breaking in 110 Tires, changing 159 Tires, condition 157 Tires, damage 158 Tire size 156 Tires, minimum tread 158 Tires, retreaded tires 159 Tires, storage 160 Tire tread 157 Torque, refer to Engine

data 204 Towing another vehicle 182 Towing, being towed 182 Tow-starting 182 TPM, refer to Tire Pressure

Monitor 77 Traction control 82 Transmission Overriding selector lever

lock in case of automatic transmission with Step tronic 58

Transmission lock Refer to Changing selector

lever positions 57 Transmission, manual 56 Transporting children

safely 44

Seite 215

Everything from A to Z Reference

215Online Edition for Part no. 01 40 2 911 521 - VI/13

Trip-distance counter, refer to Trip odometer 59

Triple turn signal activa tion 52

Trip odometer 59 Trunk lid, refer to Tailgate 28 Trunk, refer to Cargo area 28 Turning lamps, refer to Adap

tive Light Control 69 Turn signal Indicator lamp 16 Turn signal, bulb replace

ment 173 Turn signals 52 Turn signals, triple turn signal

activation 52

U Uniform Tire Quality Grading/

UTQG 156 Unintentional alarms, avoid

ing 32 Units Average fuel consump

tion 62 Temperature 62 Universal remote control 92 Unlocking From the inside 27 From the outside 24 Tailgate 30 Without remote control, re

fer to Comfort Access 30 Upholstery care 188 Upholstery material care 188 USB audio interface 131

V Vehicle battery 178 Vehicle, breaking in 110 Vehicle care 187 Vehicle care, refer to

Care 186 Vehicle equipment 6 Vehicle paintwork, care 188

Vehicle storage 189 Vehicle, switching off 51 Vehicle wash 186 Ventilation Air conditioning 91

W Warning and indicator

lamps 17 Warning and indicator lamps,

overview 190 Warning messages, refer to

Check Control 65 Warning triangle 180 Washer/wiper system 53 Washer/wiper system, rain

sensor 53 Washer/wiper system, washer

fluid 55 Washer fluid 55 Washer fluid reservoir 55 Washing, vehicle 186 Welcome lamps 69 Wheel change 177 Wheels and tires 152 Wheels, changing 159 Wheels, Flat Tire Monitor

FTM 75 Windows Closing 34 Convenient operation 25 Opening 34 Windows, care 187 Windows, defrosting and de

fogging 88 Windows, pinch protection 34 Windshield Defrosting and defogging 88 Windshield, defrosting, refer

to Defrosting windows 88 Windshield wash 53 Windshield washer fluid 55 Windshield wash, rear win

dow 55 Windshield wash, reservoir for

washer fluid 55

Windshield wash, washer fluid 55

Windshield wiper blades, changing 171

Windshield wiper, refer to Washer/wiper system 53

Winter storage, care 189 Winter tires 159 Winter tires, tread 157 Wiper blades, care 187 Wiper blades, changing 171 Wiper fluid 55

Y Your individual vehicle Settings, refer to Personal

Profile 22

Seite 216

Reference Everything from A to Z

216 Online Edition for Part no. 01 40 2 911 521 - VI/13

Manualsnet FAQs

If you want to find out how the Paceman Mini works, you can view and download the Mini Paceman 2014 Owner's Manual on the Manualsnet website.

Yes, we have the Owner's Manual for Mini Paceman as well as other Mini manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Owner's Manual should include all the details that are needed to use a Mini Paceman. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Mini Paceman 2014 Owner's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Mini Paceman 2014 Owner's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Mini Paceman 2014 Owner's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Mini Paceman 2014 Owner's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Mini Paceman 2014 Owner's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.