Milwaukee M12 2125-20 Light Operator's Manual PDF

1 of 2
1 of 2

Summary of Content for Milwaukee M12 2125-20 Light Operator's Manual PDF

M12 LED UNDERHOOD LIGHT LAMPE DE TRAVAIL SOUS CAPOT DEL M12 LMPARA LED M12 PARA COFRE

IMPORTANT SAFETY INSTRUCTIONS

WARNING READ AND UNDERSTAND ALL INSTRUCTIONS. When using electric appli- ances, basic precautions should always be followed, including the following:

Before using, read this operators manual, your battery pack and charger operators manual, and all labels on the battery pack, charger and light. Learn your lights applications and limitations as well as potential hazards as- sociated with this type of tool.

Read and understand all the instructions before using the appliance. To reduce the risk of injury, close supervision is necessary when an appliance is used near children. Store idle light out of reach of children. Warm lights can become hazardous in the hands of children. Store indoors. Do not expose to rain. Batteriesmustberechargedonlywiththechargerspecifiedbythemanufacturer. A charger that may be suitable for one type of battery may create a risk of fire when used with another battery. Uselightonlywithspecificallydesignatedbatterypack. Use of any other batteries may create a risk of fire. When battery pack is not in use, keep it away from metal objects like: paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause sparks, burns, or a fire.

Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE service facility for a free replacement.

SAVE THESE INSTRUCTIONS FUNCTIONAL DESCRIPTION

1. Mounting carrier 2. Pinch zone 3. Carrier hooks 4. Battery bay

5. Power and Mode buttons 6. Carrier clips 7. Light bar 8. Light bar hook

1 2

57

2

68

3 3

6 4

SYMBOLOGY Volts

Direct Current Read Operator's Manual

C US UL Listing for Canada and U.S.

Pinch Hazard - Keep hands out of pinch zone

SPECIFICATIONS Cat. No. ................................................................................................................................................. 2125-20 Ingress Protection........................................................................................................................................IP54 Light Output High .................................................................................................................................................. 1350Lm Low ..................................................................................................................................................... 600Lm Mounting Carrier Extension ...................................................................................................................48" - 78" Battery Type .............................................................................................................................................M12 Charger Type ............................................................................................................................................M12 DC Input Volts................................................................................................................................................. 12 Max DC Input Amps....................................................................................................................................... 0.9 Recommended Ambient Operating Temperature ...............................................................................0F to 125F

ASSEMBLY WARNING Rechargeonlywiththechargerspecifiedforthebattery.Forspecificcharginginstructions,

read the operators manual supplied with your charger and battery. Inserting/Removing the Battery

To remove the battery, push in the release buttons and pull the battery pack away from the tool. WARNING Always remove battery pack before changing or removing accessories.

To insert the battery, slide the pack into the body of the tool. Make sure it latches securely into place. OPERATION

WARNING To reduce the risk of injury, do not look directly into the light when the light is on.

To turn on the light, press the Power button . Press the MODE button to cycle through High and Low settings. To turn off the light, press the Power button again.

Hanging the Light The light bar can be used on its own, using the light bar hook to hang by a surface, or with the carrier to mount inside the hood of a car. To mount the light to the hood of a car: 1. Place the mounting carrier on the hood of the car using the carrier hooks. Extend the hooks if necessary to

ensure fit. Make sure the carrier is fully seated on the hood. WARNING! Pinch hazard - Keep hands out of pinch zone.

2. Adjust the light bar as necessary by rotating it to the desired position and sliding it left or right along the mounting carrier.

MAINTENANCE WARNING To reduce the risk of injury, always unplug the charger and remove the battery pack from

the charger or tool before performing any maintenance. Never disassemble the tool, bat- tery pack or charger. Contact a MILWAUKEE service facility for ALL repairs.

Maintain Light Keep your light, battery pack and charger in good repair by adopting a regular maintenance program. If the light does not work properly, return the light to a MILWAUKEE service facility for repairs.

WARNING To reduce the risk of personal injury and damage, never immerse your tool, battery pack orchargerinliquidorallowaliquidtoflowinsidethem.

Cleaning Keep tool handles clean, dry and free of oil or grease. Use only mild soap and a damp cloth to clean the tool, bat- tery pack and charger since certain cleaning agents and solvents are harmful to plastics and other insulated parts. Some of these include gasoline, turpentine, lacquer thinner, paint thinner, chlorinated cleaning solvents, ammonia and household detergents containing ammonia. Never use flammable or combustible solvents around tools.

ACCESSORIES WARNING Use only recommended accessories. Others may be hazardous.

For a complete listing of accessories, go online to www.milwaukeetool.com or contact a distributor. LIMITED WARRANTY - USA & CANADA

Every MILWAUKEE power tool* (see exceptions below) is warranted to the original purchaser only to be free from defects in material and workman- ship. Subject to certain exceptions, MILWAUKEE will repair or replace any part on an electric power tool which, after examination, is determined by MILWAUKEE to be defective in material or workmanship for a period of five (5) years** after the date of purchase unless otherwise noted. Return of the power tool to a MILWAUKEE factory Service Center location or MILWAUKEE Authorized Service Station, freight prepaid and insured, is required. A copy of the proof of purchase should be included with the return product. This warranty does not apply to damage that MILWAUKEE determines to be from repairs made or attempted by anyone other than MILWAUKEE authorized personnel, misuse, alterations, abuse, normal wear and tear, lack of maintenance, or accidents. Normal Wear: Many power tools need periodic parts replacement and service to achieve best performance. This warranty does not cover repair when normal use has exhausted the life of a part including, but not limited to, chucks, brushes, cords, saw shoes, blade clamps, o-rings, seals, bumpers, driver blades, pistons, strikers, lifters, and bumper cover washers. *This warranty does not cover Air Nailers & Staplers; Airless Paint Sprayer; Cordless Battery Packs; Gasoline Driven Portable Power Generators; Hand Tools; Hoist Electric, Lever & Hand Chain; M12 Heated Gear; Reconditioned Product; and Test & Measurement Products. There are separate and distinct warranties available for these products. **The warranty period for Job Site Radios, M12 Power Port, M18 Power Source, Jobsite Fan and Trade Titan Industrial Work Carts is one (1) year from the date of purchase. The warranty period for the Drain Cleaning Cables is two (2) years from the date of purchase. The warranty period for the LED in the LED Work Light and the LED Upgrade Bulb for the Work Light is the lifetime of the product subject to the limitations above. If during normal use the LED or LED Bulb fails, the part will be replaced free of charge. Warranty Registration is not necessary to obtain the applicable warranty on a MILWAUKEE power tool product. The manufacturing date of the product will be used to determine the warranty period if no proof of purchase is provided at the time warranty service is requested. ACCEPTANCE OF THE EXCLUSIVE REPAIR AND REPLACEMENT REMEDIES DESCRIBED HEREIN IS A CONDITION OF THE CONTRACT FOR THE PURCHASE OF EVERY MILWAUKEE PRODUCT. IF YOU DO NOT AGREE TO THIS CONDITION, YOU SHOULD NOT PURCHASE THE PRODUCT. IN NO EVENT SHALL MILWAUKEE BE LIABLE FOR ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, OR FOR ANY COSTS, ATTORNEY FEES, EXPENSES, LOSSES OR DELAYS ALLEGED TO BE AS A CONSEQUENCE OF ANY DAMAGE TO, FAILURE OF, OR DEFECT IN ANY PRODUCT INCLUDING, BUT NOT LIMITED TO, ANY CLAIMS FOR LOSS OF PROFITS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLU- SION MAY NOT APPLY TO YOU. THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS WARRANTIES, WRITTEN OR ORAL. TO THE EXTENT PERMITTED BY LAW, MILWAUKEE DISCLAIMS ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR PURPOSE; TO THE EXTENT SUCH DISCLAIMER IS NOT PERMITTED BY LAW, SUCH IMPLIED WARRANTIES ARE LIMITED TO THE DURATION OF THE APPLICABLE EXPRESS WARRANTY AS DESCRIBED ABOVE. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU, THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

This warranty applies to product sold in the U.S.A. and Canada only. Please consult the Service Center Search in the Parts & Service section of MILWAUKEEs website www.milwaukeetool.com or call 1.800.SAWDUST (1.800.729.3878) to locate your nearest service facility for warranty and non-warranty service on a Milwaukee electric power tool.

LIMITED WARRANTY - MEXICO, CENTRAL AMERICA & CARIBBEAN TECHTRONIC INDUSTRIES' warranty is for 5 years since the original purchase date. This warranty card covers any defect in material and workmanship on this Product. To make this warranty valid, present this warranty card, sealed/stamped by the distributor or store where you purchased the product, to the Authorized Service Center (ASC). Or, if this card has not been sealed/stamped, present the original proof of purchase to the ASC. Call toll-free1 01 (800) 030-7777 to find the nearest ASC, for service, parts, accessories or components. Procedure to make this warranty valid Take the product to the ASC, along with the warranty card sealed/stamped by the distributor or store where you purchased the product, and any faulty piece or component will be replaced without cost for you. We will cover all freight costs relative with this warranty process. Exceptions This warranty is not valid in the following situations a) When the product is used in a different manner from the end-user guide or instruction manual. b) When the conditions of use are not normal. c) When the product was modified or repaired by people not authorized by TECHTRONIC INDUSTRIES. Note: If cord set is damaged, it should be replaced by an Authorized Service Center to avoid electric risks. SERVICE AND ATTENTION CENTER Call to 01 (800) 030-7777 IMPORTED AND COMMERCIALIZED BY TECHTRONIC INDUSTRIES MEXICO, SA DE CV Av President Masarik #29 piso 7, Col. Polanco V Seccin CP 11560, Deleg. Miguel Hidalgo, CDMX

Model:

Date of Purchase:

Distributor or Store Stamp:

RGLES IMPORTANTES DE SCURIT

AVERTISSEMENT Lire et veiller bien comprendre toutes les instructions. Lors de lutilisation doutils lectriques, toujours suivre les consignes de base, notamment :

Avant dutiliser, lire le prsent manuel dutilisation, le manuel dutilisation du bloc-piles et du chargeur, ainsi que toutes les tiquettes se trouvant sur le bloc-piles, le chargeur et la lampe. Lire le manuel de la lampe pour apprendre les applications et les limites, ainsi que les risques spcifiques relatifs lutilisation de cet outil.

Lire et comprendre toutes les instructions avant dutiliser lappareil. Pour rduire les risques de blessure, porter une attention particulire lorsque le produit est utilis en prsence denfants.

Entreposer la lampe non utilise hors de la porte des enfants. Les lampes chaudes peuvent tre dangereuses dans les mains des enfants.

Entreposer lintrieur. Ne pas exposer la pluie. Lespilesdoiventtrechargesuniquementaveclechargeurspcifiparlefabricant. Un chargeur appropri pour un type de piles peut crer un risque d'incendie s'il est utilis avec un autre type de piles.

Nutiliser la lampe quavec un bloc-piles recommand. L'usage de tout autre bloc-piles peut crer un risque d'incendie. Lorsque le bloc-piles nest pas en usage, le tenir lcart des articles mtalliques tels que : les attaches trom- bones, pices de monnaie, cls, clous, vis et autres petits objets mtalliques risquant d'tablir le contact entre les deux bornes. La mise en court-circuit des bornes des piles peut causer des tincelles, des brlures ou un incendie.

Maintenir en tat les tiquettes et les plaques signaltiques. Des informations importantes y figurent. Si elles sont illisibles ou manquantes, contacter un centre de service et dentretien MILWAUKEE pour un remplacement gratuit.

CONSERVEZ CES INSTRUCTIONS DESCRIPTION FONCTIONNELLE

1. Support d'installation 2. Zone de pincement 3. Crochets du support 4. Compartiment des piles

5. Boutons de mise en marche et de mode 6. Pinces du support 7. Barre lumineuse 8. Crochet de la barre lumineuse

1 2

457

2

6 68

3 3

PICTOGRAPHIE Volts

Courant direct Lire le manuel d'utilisation

C US

UL Listing Mark pour Canada et Etats-unis

Risque de pincement Tenir les mains l'cart de la zone de pincement

SPECIFICATIONS No de Cat ............................................................................................................................................... 2125-20 Protection contre l'infiltration ........................................................................................................................ IP54 Type de batterie .........................................................................................................................................M12 Type de chargeur.......................................................................................................................................M12 Alimentation en V CD .......................................................................................................................................12 Alimentation en A CD max ...............................................................................................................................0,9 Temprature ambiante de fonctionnement recommande .......................................... -18C 50C (0F 125F)

MONTAGE DE L'OUTIL AVERTISSEMENT Nerecharger labatteriequaveclechargeurspcifi.Pourlesinstructionsde

chargespcifiques,lirelemanueldutilisationfourniaveclechargeuretlesbat- teries.

Insertion/Retrait de la batterie Pour retirer la batterie, enfoncer les boutons de dverrouillage et la tirer hors de loutil.

AVERTISSEMENT Il faut toujours retirer la batterie et verrouiller la dtente de loutil avant de changer ou denlever les accessoires.

Pour insrer la batterie, la glisser dans le corps de loutil. Sassurer quelle est fixe solidement. MANIEMENT

AVERTISSEMENT Afind'viterlesrisquesd'blouissement,neregardezpasdirectementlerflecteur de la lampe lorsqu'elle est allumee.

Pour allumer la lampe, appuyer sur le bouton de mise en marche . Appuyer sur le bouton MODE pour basculer entre les rglages d'clairage lev et Faible. Pour teindre la lampe, appuyer encore une fois sur le bouton de mise en marche .

Suspension de la lampe La barre lumineuse peut tre utilise seule en la suspendant l'aide du crochet de la barre, ou encore avec le support pour l'installer l'intrieur du capot d'une voiture. Pour installer la lampe au capot d'une voiture : 1. Placer le support d'installation sur le capot de la voiture l'aide des crochets du support. tirer les crochets

au besoin pour s'assurer d'un bon ajustement. Vrifier que le support d'installation est compltement appuy sur le capot. AVERTISSEMENT! Risque de pincement Tenir les mains l'cart de la zone de pincement.

2. Ajuster la barre lumineuse au besoin en la tournant dans la position dsire et en la glissant gauche ou droite le long du support d'installation.

ENTRETIEN AVERTISSEMENT Pour minimiser les risques de blessures corporelles, dbranchez le chargeur et

retirez la batterie du chargeur ou une lampe torche avant dy effectuer des travaux dentretien. Ne dmontez jamais une lampe torche, la batterie ou le chargeur. Pour toute rparation, consultez un centre de service MILWAUKEE accrdit.

Entretien de la lampe torche Gardez la lampe torche, la batterie et le chargeur en bonne condition en adoptant un programme de mainte- nance ponctuel. Si la lampe nclaire toujours pas correctement, faites-la rparer un centre de service MILWAUKEE accrdit.

To reduce the risk of injury, user must read and understand operator's manual. Afinderduirelerisquedeblessures,l'utilisateurdoitlireet bien comprendre le manuel de l'utilisateur. Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual del operador.

MILWAUKEE TOOL 58-22-2126d1 02/1713135WestLisbonRoadBrookfield,Wisconsin,U.S.A.53005PrintedinChina 01606800101Q-01(A)

AVERTISSEMENT Pour minimiser les risques de blessures ou de dommages l'outil, n'immergez jamaisl'outil,labatterieoulechargeuretnelaissezpasdeliquides'yinfiltrer.

Nettoyage Gardez les poignes de loutil propres, sec et exemptes dhuile ou de graisse. Le nettoyage de loutil, du chargeur et de la batterie doit se faire avec un linge humide et un savon doux. Certains nettoyants tels lessence, la trbenthine, lesdiluants laque ou peinture, les solvants chlors, lammoniaque et les dtergents dusage domestique qui en contiennent pourraient dtriorer le plastique et lisolation des pices. Ne laissez jamais de solvants inflammables ou combustibles auprs de loutil.

ACCESOIRES AVERTISSEMENT Lutilisationdautresaccessoiresqueceuxquisontspcifiquementrecommands

pour cet outil peut comporter des risques. Pour une liste complte des accessoires, visiter le site internet www.milwaukeetool.com ou contactez un dis- tributeur.

GARANTIE LIMITE - AUX TATS-UNIS ET AU CANADA Chaque outil lectrique* MILWAUKEE (voir exceptions ci-dessous) est garanti lacheteur dorigine uniquement pour tre exempt de vices de matriaux et de fabrication. Sous rserve de certaines exceptions, MILWAUKEE rparera ou remplacera toute pice dun outil lectrique qui, aprs examen par MILWAUKEE, sest avre tre affecte dun vice de matriau ou de fabrication et ce pendant une priode de cinq (5) ans** compter de la date dachat, sauf indication contraire. Le retour de loutil lectrique, un centre de rparations en usine MILWAUKEE ou un centre dentretien agr MILWAUKEE, est requis en port prpay et assur. Une copie de la preuve dachat doit tre prsente avec le produit retourn. Cette garantie ne couvre pas les dommages que MILWAUKEE dtermine tre causs par des rparations ou des tentatives de rparation par quiconque autre que le personnel agr par MILWAUKEE, ou par des utilisations incorrectes, des altrations, des utilisations abusives, une usure normale, une carence dentretien ou des accidents. Usure normale : Plusieurs outils lectriques requirent un remplacement et un entretien priodique de leurs pices pour un meilleur rendement. Cette garantie ne couvre pas la rparation des pices due lutilisation normale de loutil, y compris, mais sans sy limiter, les mandrins, les brosses, les cordes, les sabots de scie, les portes-lames, les joints toriques, les joints, les amortisseurs, les lames dentranement, les pistons, les percuteurs, les crochets et les rondelles couvercle amortisseur. *Cette garantie ne sapplique pas aux cloueuses-agrafeuses pneumatiques, aux pulvrisateurs peinture sans air, aux blocs-piles pour outils sans fil, aux gnratrices dalimentation portatives essence, aux outils main, aux monte-charges lectriques, levier et chane (manuels), aux vestes chauffantes M12, aux produits rusins, ni aux produits dessai et de mesure. Il existe des garanties spares distinctes pour ces produits. **La priode de garantie applicable pour les radios de chantier, le port dalimentation M12, la source lectrique M18, le ventilateur de chantier et les chariots de travail industriels Trade Titan est dune dure dun (1) an compter de la date dachat. La priode de garantie des cbles de nettoyage des canalisations est de deux (2) ans compter de la date dachat. La priode de garantie couvrant la DEL de la lampe de travail DEL et lampoule amliore DEL de la lampe de travail est une garantie vie du produit soumise aux limitations ci-dessus. En cas de dfaillance de la DEL ou de lampoule DEL pendant son utilisation normale, la pice dfaillante sera remplace gratuitement. Lenregistrement de la garantie nest pas ncessaire pour bnficier de la garantie en vigueur sur un outil lectrique MILWAUKEE. La date de fabrication du produit servira tablir la priode de garantie si aucune preuve dachat nest fournie lorsquune demande de service sous garantie est dpose. LACCEPTATION DES RECOURS EXCLUSIFS DE RPARATION ET DE REMPLACEMENT DCRITS DANS LES PRSENTES EST UNE CON- DITION DU CONTRAT DACHAT DE TOUT PRODUIT MILWAUKEE. SI VOUS NACCEPTEZ PAS CETTE CONDITION, VOUS NE DEVEZ PAS ACHETER LE PRODUIT. EN AUCUN CAS, MILWAUKEE NE SAURAIT TRE RESPONSABLE DE TOUT DOMMAGE ACCESSOIRE, SPCIAL OU INDIRECT, DE DOMMAGES-INTRTS PUNITIFS OU DE TOUTE DPENSE, DHONORAIRES DAVOCATS, DE FRAIS, DE PERTE OU DE DLAIS ACCESSOIRES TOUT DOMMAGE, DFAILLANCE OU DFAUT DE TOUT PRODUIT, Y COMPRIS NOTAMMENT LES PERTES DE PROFIT. CERTAINS TATS ET PROVINCES NE PERMETTANT PAS L'EXCLUSION OU LA LIMITATION DES DOMMAGES DIRECTS OU INDIRECTS, LES RESTRICTIONS CI-DESSUS PEUVENT DONC NE PAS VOUS TRE APPLICABLES. CETTE GARANTIE EST EXCLUSIVE ET REMPLACE TOUTE AUTRE GARANTIE EXPRESSE, QUELLE SOIT VERBALE OU CRITE. DANS LA MESURE PERMISE PAR LA LOI. MILWAUKEE RENONCE TOUTE GARANTIE IMPLICITE, Y COMPRIS, MAIS SANS SY LIMITER, TOUTE GARANTIE IMPLICITE DE QUALIT MARCHANDE OU DADAPTATION UNE UTILISATION OU UNE FIN PARTICULIRE. DANS LA MESURE O UNE TELLE STIPULATION DEXONRATION NEST PAS PERMISE PAR LA LOI, LA DURE DE CES GARANTIES IMPLICITES EST LIMITE LA PRIODE APPLICABLE DE LA GARANTIE EXPRESSE, TEL QUE CELA EST DCRIT PRCDEMMENT. CERTAINS TATS ET PROVINCES NE PERMETTANT PAS DE LIMITATION DE DURE DES GARANTIES IMPLICITES, LES RESTRICTIONS CI- DESSUS PEUVENT DONC NE PAS VOUS TRE APPLI- CABLES. LA PRSENTE VOUS CONFRE DES DROITS LGAUX PARTICULIERS; VOUS BNFICIEZ GALEMENT DAUTRES DROITS QUI VARIENT DUN TAT UN AUTRE. Cette garantie sapplique aux produits vendus aux tats-Unis et au Canada uniquement. Veuillez consulter la rubrique Centre SAV Milwaukee, dans la section Pices et Services du site Web de MILWAUKEE, ladresse www.milwaukeetool.com, ou composer le 1-800-SAWDUST (1-800-729-3878) afin de trouver le centre de service de votre rgion le plus proche pour lentretien, sous garantie ou non, de votre outil lectrique Milwaukee.

GARANTIE LIMITE MEXIQUE, AMRIQUE CENTRALE ET CARABES

TECHTRONIC INDUSTRIES' garantit le produit pendant 5 ans partir de la date dachat dorigine. Le prsent bon de garantie couvre tous les vices de matriau et de fabrication que peut afficher ce produit. Pour assurer la validit de la prsente garantie, veuillez prsenter ce bon de garantie, estampill du sceau du distributeur ou du magasin o le produit a t achet, au centre de rparations agr. Si le bon de garantie na pas t estampill, veuillez fournir la preuve dachat dorigine au centre de rparations agr. Pour un entretien des pices, des accessoires ou des composants, composer sans frais le 1-800-030-7777 afin dobtenir les coordonnes du centre de rparations agr le plus prs Procdure pour assurer la validit de la garantie Prsenter le produit au centre de rparations agr, accompagn du bon de garantie estampill du sceau du distributeur ou du magasin o le produit a t achet. Toute pice dfectueuse ou tout composant dfectueux sera remplac(e) sans frais. Milwaukee assume tous les frais de transport lis ce processus de garantie. Exceptions Cette garantie ne sapplique pas dans les situations suivantes : a) Si le produit a t utilis pour une fin autre que celle indique dans le guide de lutilisateur final ou le manuel dinstructions. b) Si les conditions dutilisations ne sont pas habituelles. c) Si le produit a t modifi ou rpar par une personne non autorise par TECHTRONIC INDUSTRIES. Remarque : Si le cordon lectrique est endommag, il doit tre remplac par un centre de rparations agr pour viter les risques dlectrocution. CENTRE DE RPARATIONS ET DE SERVICE Composer le 01 (800) 030-7777 IMPORT ET COMMERCIALIS PAR TECHTRONIC INDUSTRIES, MEXIQUE, SA DE CV Av President Masarik #29 piso 7, Col. Polanco V Seccin CP 11560, Deleg. Miguel Hidalgo, CDMX

Modle :

Date dachat :

Sceau du distributeur ou du magasin :

INSTRUCCIONES DE SEGURIDAD ADVERTENCIA Lea y comprenda todas las instrucciones. Al utilizar aparatos elctricos,

siempre se deben seguir las precauciones bsicas, incluyendo las sigu- ientes:

Antes de utilizar la linterna, lea este manual del operador, el manual de su batera y cargador y todas las eti- quetas de la batera, el cargador y la lmpara. Infrmese acerca de las aplicaciones y limitaciones de su lmpara, as como los riesgos potenciales relacionados con este tipo de herramienta.

Lea y comprenda todas las instrucciones antes de utilizar el aparato. Para reducir el riesgo de lesiones, se requiere supervisin estrecha al utilizar un aparato cerca de donde hay nios. Cuando no se est usando, guarde la lmpara fuera del alcance de los nios. Las lmparas calientes pueden ser peligrosas en manos de menores de edad.

Guarde en interiores. No exponer a la lluvia. Lasbaterasdebenrecargarsenicamenteconelcargadorespecificadoporel fabricante.Un cargador que pudiera ser adecuado para un tipo de batera puede crear un riesgo de incendio cuando se usa con otra batera. Utilicelalmparanicamenteconbaterasespecficamentediseadasparalamisma. El uso de otras bateras puede crear un riesgo de incendio.

Cuando la batera no est en uso, mantngala alejada de objetos metlicos como sujetapapeles, monedas, llaves, clavos, tornillos u otros objetos metlicos pequeos que puedan formar una conexin de una terminal a otra. Provocar un cortocircuito al juntar las terminales de las bateras puede causar chispas, quemaduras o un incendio.

Conserve las etiquetas y las placas nominales. Contienen informacin importante. Si son ilegibles o no estn pre- sentes, comunquese con un centro de servicio MILWAUKEE para obtener un reemplazo gratuito.

GUARDE ESTAS INSTRUCCIONES FUNCTIONAL DESCRIPTION

1. Portalmpara para montar 2. Zona de pellizcamiento 3. Ganchos de portalmpara 4. Compartimiento de la batera

5. Botones de encendido y modo 6. Broches de portalmpara 7. Lmpara de barra 8. Gancho para lmpara de barra

1 2

457

2

6 68

3 3

SIMBOLOGA Volts

Corriente continua Leer el manual del operador

C US

UL Listing Mark para Canad y Estados Unidos

Riesgo de pellizcamiento - Mantenga las manos fuera de la zona de pellizcamiento

ESPECIFICACIONES Cat. No. ...................................................................................................................................................2125-20 Proteccin de ingreso ....................................................................................................................................IP54 Tipo de batera ...........................................................................................................................................M12 Tipo de cargador ........................................................................................................................................M12 Entrada Volts de CD ......................................................................................................................................... 12 Ameraje mximo de salida CD ........................................................................................................................ 0,9 Temperaturea ambiente recomendada para operar ...................................................-18C to 50C (0F to 125F)

ENSAMBLAJE ADVERTENCIA Recarguelabaterasloconelcargadorespecificadoparaella.Parainstrucciones

especficassobrecmocargar, leaelmanualdeloperadorsuministradoconsu cargador y la batera.

Como se inserta/quita la batera en la herramienta Para retirar la batera, presione los botones de liberacin y jale de la batera para sacarla de la herramienta.

ADVERTENCIA Para reducir el riesgo de lesiones, extraiga siempre la batera antes de acoplar o desacoplar accesorios.

Para introducir la batera, deslcela en el cuerpo de la herramienta. Asegrese de que quede bien firme en su posicin.

OPERACION ADVERTENCIA Para reducir el riesgo de lesiones, no mire directamente hacia la luz cuando la lmpara

est encendida.

Para encender la lmpara, presione el botn de Encendido . Presione el botn MODE para ciclar por los ajustes alto y bajo. Para apagar la lmpara, presione nuevamente el botn de Encendido .

Cmo colgar la lmpara La lmpara de barra puede usarse de manera independiente, usando el gancho para colgarla junto a una superficie o con el portalmpara para montarla en el interior del cofre de un automvil. Para montar la lmpara en el cofre de un automvil: 1. Coloque el portalmpara de montaje en el cofre del automvil usando los ganchos del portalmpara. Ex-

tienda los ganchos si se necesita para asegurar el ajuste. Asegrese de que el portalmpara est totalmente asentado en el cofre. ADVERTENCIA! Riesgo de pellizcamiento - Mantenga las manos fuera de la zona de pellizcamiento.

2. Ajuste la lmpara de barra segn se requiera rotndola a la posicin deseada y deslizndola a la izquierda o a la derecha a lo largo del portalmpara de montaje.

MANTENIMIENTO ADVERTENCIA Para reducir el riesgo de una lesin, desconecte siempre una lmpara de trabajo

antes de darle cualquier mantenimiento. Nunca desarme una lmpara de trabajo ni tratedehacermodificacionesenelsistemaelctricodelamisma.AcudasiempreaunCentrodeSer- vicio MILWAUKEE para TODAS las reparaciones.

Mantenimiento de la lmpara de trabajo Mantenga la lmpara de trabajo, el paquete de la batera y el cargador en buenas condiciones adoptando un programa regular de mantenimiento. Si la lmpara de trabajo todava no funciona correctamente, devuelva la lmpara de trabajo a un centro de servicio MILWAUKEE para que se realicen reparaciones.

ADVERTENCIA Para reducir el riesgo de una lesin, descarga elctrica o dao a la herramienta, bateraocargador,nuncalossumerjaenlquidosnipermitaqueestosfluyandentro

de los mismos. Limpieza

Mantenga los mangos y empuaduras limpios, secos y libres de aceite o grasa. Use solo jabn neutro y un trapo hmedo para limpiar la herramienta, batera y el cargador, ya que algunos substancias y solventes limpiadores son dainos a los plsticos y partes aislantes. Algunos de estos incluyen: gasolina, turpentina,thner, lacas, thner para pinturas, solventes para limpieza con cloro, amonaco y detergentes caseros que tengan amonia. Nunca usa solventes inflamables o combustibles cerca de una herramienta.

ACCESORIOS ADVERTENCIA Utiliceslolosaccesoriosespecficamenterecomendados.Otrosaccesoriospuede

ser peligroso. Para una lista completa de accessorios, visite nuestro sitio en Internet: www.milwaukeetool.com o pngase en contacto con un distribuidor.

GARANTA LIMITADA - E.U.A. Y CANAD Cada herramienta elctrica* MILWAUKEE (vea las excepciones ms adelante) se garantiza al comprador original nicamente contra defectos en materiales y mano de obra. Sujeto a ciertas excepciones, MILWAUKEE reparar o reemplazar cualquier parte de una herramienta elctrica que, tras una revisin, MILWAUKEE determine que tiene defectos en material o mano de obra durante un perodo de cinco (5) aos** despus de la fecha de compra, a menos que se indique lo contrario. Se requiere que se enve la herramienta elctrica a un Centro de Servicio de fbrica de MILWAUKEE o a una Estacin de Servicio Autorizada de MILWAUKEE, con flete prepagado y asegurado. Debe incluirse una copia del comprobante de compra con el producto enviado. Esta garanta no aplica a daos que MILWAUKEE determine que son ocasionados por reparaciones o intentos de reparaciones realizados por una persona que no sea personal autorizado de MILWAUKEE, uso indebido, alteraciones, maltrato, desgaste normal, falta de mantenimiento o accidentes. Desgaste normal: Muchas herramientas elctricas necesitan reemplazos peridicos de partes y servicio para lograr el mejor rendimiento. Esta garanta no cubre la reparacin cuando el uso normal ha agotado la vida til de una parte, incluyendo, entre otras, mandriles, cepillos, cables, zapatas de sierra, abrazaderas de hoja, juntas tricas, sellos, parachoques, cuchillas de propulsin, pistones, percutores, elevadores y arandelas de la cubierta del parachoques. *Esta garanta no cubre las clavadoras y grapadoras neumticas, pulverizador de pintura sin aire, bateras inalmbricas, generadores porttiles accionados por gasolina, herramientas manuales, polipasto elctrico, de palanca y cadena manual, prendas calefactadas M12; productos rea- condicionados, y productos de prueba y medicin. Hay garantas independientes y distintas disponibles para estos productos. **El periodo de garanta de los radios para obra, puerto de energa M12, fuente de poder M18, ventilador para obra y carros de trabajo industri- ales Trade Titan es de un (1) ao a partir de la fecha de compra. El periodo de garanta de los cables de limpieza de drenaje es de dos (2) aos desde la fecha de compra. El periodo de garanta del LED de la lmpara de trabajo LED y el foco de cambio a LED para la lmpara de trabajo es por toda la vida del producto, sujeto a las limitaciones mencionadas anteriormente. Si durante el uso normal falla el LED o el foco LED, la parte se reemplazar sin cargo alguno. No es necesario el registro de la garanta para obtener la garanta correspondiente para un producto de herramienta elctrica MILWAUKEE. La fecha de manufactura del producto se utilizar para determinar el periodo de garanta si no se proporciona comprobante de compra al solicitar el servicio en garanta. LA ACEPTACIN DE LOS REMEDIOS EXCLUSIVOS DE REPARACIN Y REEMPLAZO AQU DESCRITOS ES UNA CONDICIN DEL CONTRATO PARA LA COMPRA DE TODO PRODUCTO DE MILWAUKEE. SI USTED NO ACEPTA ESTA CONDICIN, NO DEBE COMPRAR EL PRODUCTO. MILWAUKEE NO SER RESPONSABLE EN NINGN CASO DE DAOS INCIDENTALES, ESPECIALES, EMERGENTES O PUNITIVOS, NI DE NINGN COSTO, HONORARIOS LEGALES, GASTOS, PRDIDAS O DEMORAS ALEGADOS COMO CONSECUENCIA DE ALGN DAO, FALLA O DEFECTO EN NINGN PRODUCTO, INCLUYENDO, ENTRE OTROS, RECLAMACIONES POR PRDIDA DE UTILIDADES. ALGUNOS ESTA- DOS NO PERMITEN LA EXCLUSIN O LIMITACIN DE RESPONSABILIDAD POR DAOS INCIDENTALES O EMERGENTES, POR LO QUE LA ANTERIOR LIMITACIN O EXCLUSIN PODRA NO APLICARSE EN SU CASO. ESTA GARANTA ES EXCLUSIVA Y REEMPLAZA TODAS LAS DEMS GARANTAS EXPRESAS, ESCRITAS U ORALES. EN LA MEDIDA EN QUE LO PERMITA LA LEY, MILWAUKEE DESCONOCE CUALQUIER GARANTA IMPLCITA, INCLUYENDO, SIN LIMITACIN, CUALQUIER GARANTA IMPLCITA DE COMERCIABILIDAD O IDONEIDAD PARA UN FIN O USO ESPECFICO; EN LA MEDIDA EN QUE DICHO DESCONOCIMIENTO NO SEA PERMITIDO POR LA LEY, DICHAS GARANTAS IMPLCITAS SE LIMITAN A LA DURACIN DE LA GARANTA EXPRESA CORRESPONDIENTE SEGN SE DESCRIBI ANTERIORMENTE. ALGUNOS ESTADOS NO PERMITEN LIMITACIONES SOBRE LA DURACIN DE UNA GARANTA IMPLCITA, POR LO QUE LA ANTERIOR LIMITACIN PUDIERA NO APLICARSE A USTED. ESTA GARANTA LE DA DERECHOS LEGALES ESPECFICOS Y USTED PODRA ADEMS TENER OTROS DERECHOS QUE VARAN DE UN ESTADO A OTRO. Esta garanta aplica a productos vendidos en los Estados Unidos y en Canad nicamente. Consulte la Bsqueda de Centros de Servicio en la seccin de Refacciones y Servicio del sitio web de MILWAUKEE www.milwaukeetool.com o llame al 1.800.SAWDUST (1.800.729.3878) para localizar el centro de servicio ms cercano para servicio dentro y fuera de la garanta para una herramienta elctrica Milwaukee.

PLIZA DE GARANTA - VALIDA SOLO PARA MXICO, AMRICA CENTRAL Y EL CARIBE

La garanta de TECHTRONIC INDUSTRIES es por 5 aos a partir de la fecha original de compra. Esta tarjeta de garanta cubre cualquier defecto de material y mano de obra en ese Producto. Para hacer vlida esta garanta, presente esta tarjeta de garanta, cerrada/sellada por el distribuidor o la tienda donde compr el producto, al Centro de Servicio Autorizado (ASC). O, si esta tarjeta no se ha cerrado/sellado, presente la prueba original de compra a ASC. Llame gratis al 01 (800) 030-7777 para encontrar el ASC ms cercano, para servicio, partes, accesorios o componentes. Procedimiento para hacer vlida esta garanta Lleve el producto a ASC, junto con la tarjeta de garanta cerrada/sellada por el distribuidor o la tienda donde compr el producto, y cualquier pieza o componente defectuoso se reemplazar sin costo para usted. Cubriremos todos los costos de flete con relacin a este proceso de garanta Excepciones Esta garanta no tendr validez en las siguientes situaciones: a) Cuando el producto se use de manera distinta a la que indica el manual del usuario final o de instrucciones. b) Cuando las condiciones de uso no sean normales. c) Cuando otras personas no autorizadas por TECHTRONIC INDUSTRIES modifiquen o reparen el producto. Nota: si el juego de cables est daado, tiene que reemplazarse en un Centro de Servicio Autorizado para evitar riesgos elctricos. CENTRO DE SERVICIO Y ATENCIN Llame al 01 (800) 030-7777 IMPORTADO Y COMERCIALIZADO POR TECHTRONIC INDUSTRIES, MXICO, SA DE CV Av. President Masarik #29 piso 7, C

Manualsnet FAQs

If you want to find out how the M12 Milwaukee works, you can view and download the Milwaukee M12 2125-20 Light Operator's Manual on the Manualsnet website.

Yes, we have the Operator's Manual for Milwaukee M12 as well as other Milwaukee manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Operator's Manual should include all the details that are needed to use a Milwaukee M12. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Milwaukee M12 2125-20 Light Operator's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Milwaukee M12 2125-20 Light Operator's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Milwaukee M12 2125-20 Light Operator's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Milwaukee M12 2125-20 Light Operator's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Milwaukee M12 2125-20 Light Operator's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.