Mazda 6 2003 Owner's Manual PDF

1 of 290
1 of 290

Summary of Content for Mazda 6 2003 Owner's Manual PDF

Form No. 8R29-EA-02I

J56J_8R29_EA_02I_Edition4.book Page 1 Monday, April 21, 2003 3:44 PM

J56J_8R29_EA_02I_Edition4.book Page 2 Monday, April 21, 2003 3:44 PM

A Word to Mazda Owners

Form No. 8R29-EA-02I

Thank you for choosing a Mazda. We at Mazda design and build vehicles with complete customer satisfaction in mind.

To help ensure enjoyable and trouble-free operation of your Mazda, read this manual carefully and follow its recommendations.

An Authorized Mazda Dealer knows your vehicle best. So when maintenance or service is necessary, thats the place to go.

Our nationwide network of Mazda professionals is dedicated to providing you with the best possible service.

We assure you that all of us at Mazda have an ongoing interest in your motoring pleasure and in your full satisfaction with your Mazda product.

Mazda North American Operations

2002 Mazda North American Operations Printed in U.S.A.(Print4)

Important Notes About This Manual Keep this manual in the glove box as a handy reference for the safe and enjoyable use of your Mazda. Should you resell the vehicle, leave this manual with it for the next owner.

All specifications and descriptions are accurate at the time of printing. Because improvement is a constant goal at Mazda, we reserve the right to make changes in specifications at any time without notice and without obligation.

Air Conditioning and the Environment Your Mazdas genuine air conditioner is filled with HFC134a (R134a), a refrigerant that has been found not to damage the earths ozone layer. If the air conditioner does not operate properly, consult an Authorized Mazda Dealer.

Please be aware that this manual applies to all models, equipment and options. As a result, you may find some explanations for equipment not installed on your vehicle.

J56J_8R29_EA_02I_Edition4.book Page 3 Monday, April 21, 2003 3:44 PM

How to Use This Manual

Form No. 8R29-EA-02I

We want to help you get the most driving pleasure from your vehicle. Your owners manual, when read from cover to cover, can do that in many ways.

Illustrations complement the words of the manual to best explain how to enjoy your Mazda. By reading your manual, you can find out about the features, important safety information, and driving under various road conditions.

The above symbol in this manual means "Do not do this " or "Do not let this happen".

Index: A good place to start is the Index, an alphabetical listing of all information in your manual.

Youll find several WARNINGs, CAUTIONs, and NOTEs in the manual.

The above symbol, located on some parts of the vehicle, indicates that this manual contains information related to the part. Please refer to the manual for a detailed explanation.

A WARNING indicates a situation in which serious injury or death could result if the warning is ignored.

A CAUTION indicates a situation in which bodily injury or damage to your vehicle, or both, could result if the caution is ignored.

NOTE

A NOTE provides information and sometimes suggests how to make better use of your vehicle.

WARNING

CAUTION

J56J_8R29_EA_02I_Edition4.book Page 4 Monday, April 21, 2003 3:44 PM

Table of Contents

1

2

3

4

5

6

7

8

9

10

11

Form No. 8R29-EA-02I

Your Vehicle at a Glance Interior, exterior views and part identification of your Mazda.

Essential Safety Equipment Use of safety equipment, including seats, seat belt system, SRS air bags and child-restraint systems.

Knowing Your Mazda Explanation of basic operations and controls; opening/closing and adjustment of various parts.

Before Driving Your Mazda Important information about driving your Mazda.

Driving Your Mazda Explanation of instruments and controls.

Interior Comfort Use of various features for drive comfort, including climate control and audio system.

In Case of an Emergency Helpful information on what to do in an emergency.

Maintenance and Care How to keep your Mazda in top condition.

Customer Information and Reporting Safety Defects Important consumer information including warranties and add-on equipment.

Specifications Technical information about your Mazda.

Index

J56J_8R29_EA_02I_Edition4.book Page 5 Monday, April 21, 2003 3:44 PM

J56J_8R29_EA_02I_Edition4.book Page 6 Monday, April 21, 2003 3:44 PM

1-1

Form No. 8R29-EA-02I

1 Your Vehicle at a Glance

Interior, exterior views and part identification of your Mazda.

Dashboard Overview .................................................................... 1-2

Interior Overview .......................................................................... 1-3

Exterior Overview ......................................................................... 1-4

J56J_8R29_EA_02I_Edition4.book Page 1 Monday, April 21, 2003 3:44 PM

1-2

Your Vehicle at a Glance

Form No. 8R29-EA-02I

Dashboard Overview

Hood release handle

Climate control system

Glove box

Shift lever

Parking brake

Audio system

Passenger-side air bag

Hazard warning flasher switch

Fog lights switch

Power window lock switch

Lighting control/Turn signals

Instrument cluster

Power window switches

Driver-side air bag Wiper and washer lever

Lighter

Ignition switch

AshtraySteering column release lever

Cup holder

Storage pocket

Information display

Center console

(page 2-33)

(page 3-15)

(page 3-17)

(page 5-23)

(page 5-37)

(page 5-39)

(page 3-14)

(page 6-52)

(page 5-2)

(page 3-25)

(page 6-16)

(page 6-50)

(page 5-5)

(page 5-9) (page 5-10)

(page 2-33)

(page 6-53)

(page 6-53)

(page 6-49)

(page 6-2)

(page 6-50)

(page 5-42)

(page 6-46)

(page 5-39)

J56J_8R29_EA_02I_Edition4.book Page 2 Monday, April 21, 2003 3:44 PM

1-3

Your Vehicle at a Glance

Form No. 8R29-EA-02I

Interior Overview

Vanity mirror

Rearview mirror

Seat belts

Interior light

Sunvisors

Front seats

Side air bags

Rear seat

Map light

Curtain air bags

(page 6-43)

(page 2-10)

(page 2-33)

(page 6-43)

(page 2-33)

(page 2-7) (page 2-2)

(page 6-43)

(page 3-26)

(page 6-45)

J56J_8R29_EA_02I_Edition4.book Page 3 Monday, April 21, 2003 3:44 PM

1-4

Your Vehicle at a Glance

Form No. 8R29-EA-02I

Exterior Overview

Doors and keys

Outside mirrors

Headlights

Fuel-filler lid

Child safety locks

Tires

Reverse lights

Windshield wiper blades

Hood

Front turn signal lightsFog lights

Rear turn signal lights

Brake lights/Taillights

Power windows

Rear window defroster

Trunk lid

High-mount brake light

License plate lights

Antenna

Parking lights

Sunroof

Side marker lights

(page 8-31)

(page 8-31)

(page 3-17)

(page 8-22)

(page 8-30)

(page 8-33)

(page 8-33)

(page 3-10)

(page 8-33)

(page 6-16)

(page 8-31)

(page 8-31)

(page 3-25)

(page 3-2)

(page 3-16)

(page 3-9)

(page 3-18)

(page 8-33)

(page 8-25)

(page 3-14)

(page 5-41)

(page 8-33)

J56J_8R29_EA_02I_Edition4.book Page 4 Monday, April 21, 2003 3:44 PM

2-1

Form No. 8R29-EA-02I

2 Essential Safety Equipment

Use of safety equipment, including seats, seat belt system, SRS air bags and child-restraint systems.

Seats ................................................................................................ 2-2 Front Seats ................................................................................. 2-2 Rear Seat .................................................................................... 2-7

Seat Belt Systems ......................................................................... 2-10 Seat Belt Precautions ............................................................... 2-10 3-Point Type Seat Belt ............................................................. 2-13 Front Seat Belt Pretensioner and Load Limiting Systems ...... 2-15 Rear Center Position Seat Belt ................................................ 2-17 Seat Belt Extender ................................................................... 2-19 Seat Belt Warning Light .......................................................... 2-20

Child Restraint ............................................................................ 2-21 Child Restraint Precautions ..................................................... 2-21 Installing Child-Restraint Systems .......................................... 2-24 LATCH Child-Restraint Systems ............................................ 2-29

SRS Air Bags ............................................................................... 2-33 Supplemental Restraint Systems (SRS) Precautions ............... 2-33 Air Bag System Description .................................................... 2-38

J56J_8R29_EA_02I_Edition4.book Page 1 Monday, April 21, 2003 3:44 PM

2-2

Essential Safety Equipment

Form No. 8R29-EA-02I

Seats

(Manually operated seats)

(Electrically operated seats) The seat-bottom tilt, seat height, seat slide, and seat recline can be electrically adjusted. Move them to the desired positions by using the switch on the seats lower side.

Seat Slide

(Manually operated seats)

To move a seat forward or backward, raise the lever and slide the seat to the desired position and release the lever.

Make sure the lever returns to its original position and the seat is locked in place by attempting to push it forward and backward.

Front Seats

Securing the Seats: Adjustable seats and seatbacks that are not securely locked are dangerous. In a sudden stop or collision, the seat or seatback could move, causing injury. Make sure the adjustable components of the seat are locked in place by attempting to slide the seat forward and backward and rocking the seatback.

The seat-bottom power adjustment is operated by motors. Avoid extended operation because excessive use can damage the motors.

To prevent the battery from running down, avoid using the power adjustment when the engine is stopped. The adjuster uses a great amount of electric power.

Dont use the switch to make more than one adjustment at a time.

WARNING

CAUTION

Drivers Seat Adjustment: Adjusting the drivers seat while the vehicle is moving is dangerous. The driver could lose control of the vehicle and have an accident. Adjust the drivers seat only when the vehicle is stopped.

WARNING

Lever

J56J_8R29_EA_02I_Edition4.book Page 2 Monday, April 21, 2003 3:44 PM

2-3

Essential Safety Equipment

Seats

Form No. 8R29-EA-02I

(Electrically operated seats) To slide the seat, move the slide lifter switch on the outside of the seat to the front or back and hold it. Release the switch at the desired position.

Seat Recline

Slide lifter switch

Reclining: Sitting in a reclined position while the vehicle is moving is dangerous because you dont get the full protection from seat belts. During sudden braking or a collision, you can slide under the lap belt and suffer serious internal injuries. For maximum protection, sit well back and upright.

Unlocked Seatback: A seatback plays an important role in your protection in a vehicle. Leaving the seatback unlocked is dangerous as it can allow passengers to be ejected or thrown around and baggage to strike occupants in a sudden stop or collision, resulting in severe injury. After adjusting the seatback at any time, even when there are no other passengers, rock the seatback to make sure it is locked in place.

WARNING

J56J_8R29_EA_02I_Edition4.book Page 3 Monday, April 21, 2003 3:44 PM

2-4

Essential Safety Equipment

Seats

Form No. 8R29-EA-02I

(Manually operated seats) To change the seatback angle, lean forward slightly while raising the lever. Then lean back to the desired position and release the lever.

Make sure the lever returns to its original position and the seatback is locked in place by attempting to push it forward and backward.

(Electrically operated seats) Change the seatback angle by pressing the front or rear side of the reclining switch. When the seatback is at the desired angle, release the switch.

Seat Height Adjustment (Drivers Seat)

(Manually operated seats) To raise the seat, pull up the lever. Release the lever at the desired position.

To lower the seat, push down the lever. Release the lever at the desired position.

When returning a rear-reclined seatback to its upright position, make sure you support the seatback while operating the seatback lever. If the seatback is not supported, it will flip forward suddenly and could cause injury.

Lever

CAUTION

Reclining switch

Up

Down

Lever

J56J_8R29_EA_02I_Edition4.book Page 4 Monday, April 21, 2003 3:44 PM

2-5

Essential Safety Equipment

Seats

Form No. 8R29-EA-02I

(Electrically operated seats)

Front height adjustment

To adjust the front height of the seat- bottom, raise or lower the front of the slide lifter switch on the left side of the seat.

Rear height adjustment

Raise or lower the back of the switch to adjust the rear height of the seat-bottom.

Height adjustment

Raise the seat by pulling up on the center of the switch. Release the switch at the desired position.

Lower the seat by pressing down on the center of the switch. Release the switch at the desired position.

Lumbar Support Adjustment (Drivers Seat)

To adjust the lumbar support, pull the lever forward.

Switch

Switch

Switch

Lever

J56J_8R29_EA_02I_Edition4.book Page 5 Monday, April 21, 2003 3:44 PM

2-6

Essential Safety Equipment

Seats

Form No. 8R29-EA-02I

Head Restraint

Height adjustment

To raise a head restraint, pull it up to the desired position. To lower the head restraint, press the stop- catch release, then push the head restraint down.

Adjust the head restraint so that the top is parallel with the top of the passengers ears, never the passengers neck.

Seat Warmer

The front seats are electrically heated. The ignition switch must be in the ON position.

Press the switch to turn the seat warmer on or off. When the switch is in the ON position, the indicator light will come on.

Head Restraints Adjustment: Driving with the head restraints adjusted too low or removed is dangerous. With no support behind your head, your neck could be seriously injured in a collision. Always drive with the head restraints inserted when seats are being used and make sure they are properly adjusted.

WARNING

Stop-catch release

NOTE

The thermostat regulates seat temperature by turning the current on and off.

ON

OFF

J56J_8R29_EA_02I_Edition4.book Page 6 Monday, April 21, 2003 3:44 PM

2-7

Essential Safety Equipment

Seats

Form No. 8R29-EA-02I

Rear Seat

Stacking Cargo: Stacking luggage or other cargo higher than the seatbacks, and putting things on the rear package tray is dangerous. During sudden braking or a collision, objects can become projectiles that may hit and injure passengers. Dont stack things higher than the seatbacks or put things on the rear package tray.

Securing Seats: Adjustable seats and seatbacks that are not securely locked are dangerous. In a sudden stop or collision, the seat or seatback could move, causing injury. Make sure the adjustable components of the seat are locked in place.

Unlocked Seatback: A seatback plays an important role in your protection in a vehicle. Leaving the seatback unlocked is dangerous as it can allow passengers to be ejected or thrown around and baggage to strike occupants in a sudden stop or collision, resulting in severe injury. After returning the seatback at any time, even when there are no other passengers, rock the seatback to make sure it is locked in place.

WARNING Passenger on the Folded Seatback: Driving with a passenger on the folded seatback is dangerous. Allowing a child to sit up on the folded seatback while the vehicle is moving is particularly dangerous. In a sudden stop or even a minor collision, a child not in a proper seat or child-restraint system and seat belt could be thrown forward, back or even out of the car resulting in serious injuries or death. The child or other objects in the baggage area could be thrown into other occupants and cause serious injury. Never allow a passenger to sit or stand on the folded seatback while the vehicle is moving.

Children and the Folding Rear Seats: Playing with the folding rear seats is dangerous. Once the seats are back up, a child in the trunk would not be able to get out the way they had entered. If you have small children, keep the seatbacks locked. Do not give the car keys to children and do not allow them to play in the vehicle.

NOTE

When returning a rear seat to its original position, also replace the seat belt to its normal position. Verify that the seat belt pulls and retracts.

WARNING

J56J_8R29_EA_02I_Edition4.book Page 7 Monday, April 21, 2003 3:44 PM

2-8

Essential Safety Equipment

Seats

Form No. 8R29-EA-02I

Split-Folding Rear Seatback

The seatbacks can be folded down to provide more space in the luggage compartment.

To fold the seatbacks

1. Unfasten the lap portion of the rear center seat belt (page 2-17).

2. After checking that the rear seats are clear, open the trunk and pull the remote handle levers on the left and right.

Folding Seatbacks with Remote Handle Levers: Not checking the rear seat area before folding the seatbacks with the remote handle levers is dangerous. The rear seat area is difficult to see from the rear of the vehicle. Operating the remote handle levers without checking could cause injury to a person when a seatback suddenly flips forward. Make sure to check the rear seat area before operating the remote handle levers.

Operating the Remote Handle Levers While a Rear-Facing Child-Restraint System is in the Rear Seat: Operating the remote handle levers while a rear-facing child-restraint system is in the rear seat is dangerous. It could cause injury to a child seated in the child-restraint system when the seatback suddenly flips forward. Always remove the child-restraint system from the rear seat before operating the remote handle levers for the rear seat.

WARNING

Be careful of the following when using the remote handle levers:

On a downward slope, the seatback could flip forward faster than on a flat area.

On an upward slope, the seatback may not fold down. When the seatbacks cannot be folded down with levers, pull the rear seatback forward from inside the vehicle.

Always unfasten the lap portion of the belt before folding the rear-left seatback. Leaving the lap portion of the belt fastened could cause damage to the seat belt, buckle and seatback.

CAUTION

CAUTION

Remote handle lever

J56J_8R29_EA_02I_Edition4.book Page 8 Monday, April 21, 2003 3:44 PM

2-9

Essential Safety Equipment

Seats

Form No. 8R29-EA-02I

To return the seatbacks to the upright position

1. Lift the seatbacks upright. Pull on the tops of the seatbacks from inside the vehicle to make sure they are locked.

2. Fasten the rear-center lap/shoulder belt and check that all seat belts are routed properly for passenger use (page 2-17).

Armrest

The armrest can be used or placed upright.

Seat Belts Caught Under Seatbacks: A seat belt caught under a seatback after the seatback is returned to its upright position is dangerous. In a collision or sudden stop, the seat belt cannot provide adequate protection. Always make sure the seat belts are fully pulled out from under the seatbacks.

WARNING

Armrest

J56J_8R29_EA_02I_Edition4.book Page 9 Monday, April 21, 2003 3:44 PM

2-10

Essential Safety Equipment

Form No. 8R29-EA-02I

Seat Belt Systems

Seat belts help to decrease the possibility of severe injury during accidents and sudden stops. Mazda recommends that the driver and all passengers always wear seat belts.

All of the seat belt retractors are designed to keep the lap/shoulder belts out of the way when not in use.

The drivers seat belt has no provisions for child-restraint systems and has only an emergency locking mode. The driver may wear it comfortably, and it will lock during a collision.

However, the front passengers seat and all rear lap/shoulder belt retractors operate in two modes: emergency locking mode, and for child-restraint systems, automatic locking mode.

Seat Belt Precautions

J56J_8R29_EA_02I_Edition4.book Page 10 Monday, April 21, 2003 3:44 PM

2-11

Essential Safety Equipment

Seat Belt Systems

Form No. 8R29-EA-02I

Not Wearing Seat Belts: Not wearing a seat belt is extremely dangerous. During a collision, occupants not wearing seat belts could hit someone or things inside the vehicle or even be thrown out of the vehicle. They could be seriously injured or even killed. In the same collision, occupants wearing seat belts would be much safer. Always wear your seat belt and make sure all occupants are properly restrained.

Seat Belt Damaged During an Accident: Using a damaged seat belt is dangerous. An accident could damage the belt webbing of the seat belt in use. A damaged seat belt cannot provide adequate protection in a collision. Whether a front seat was occupied or not, if the front air bags deployed the pretensioners also deployed and both front seat belts must be replaced. Have an Authorized Mazda Dealer inspect all seat belt systems in use during an accident before they are used again.

Twisted Seat Belts: Twisted seat belts are dangerous. In a collision, the full width of the belt isnt available to absorb the impact. This puts more force on the bones beneath the belt, which could break them or cause other serious injury or death. Dont wear twisted seat belts.

One Belt, One Passenger: Using one seat belt for more than one person at a time is dangerous. A seat belt used in this way cant spread the impact forces properly and the two passengers could be crushed together and seriously injured or even killed. Never use one belt for more than one person at a time.

Belt retraction may become difficult if the belts and rings are soiled, so try to keep them clean.

WARNING

CAUTION

Ring

J56J_8R29_EA_02I_Edition4.book Page 11 Monday, April 21, 2003 3:44 PM

2-12

Essential Safety Equipment

Seat Belt Systems

Form No. 8R29-EA-02I

Pregnant Women and Persons with Serious Medical Conditions

Pregnant women should wear seat belts. Ask your doctor for specific recommendations. The lap belt should be worn SNUGLY AND AS LOW AS POSSIBLE OVER THE HIPS. The shoulder belt should be worn across your shoulder properly, but never across the stomach area. Persons with serious medical conditions also should wear seat belts. Check with your doctor for any special instructions regarding specific medical conditions.

Emergency Locking Mode

If the belt has fully retracted, it will always be in the emergency locking mode until you move it into automatic locking mode by pulling the belt all the way out to its full length. In the emergency locking mode, the belt remains comfortable on the occupant and the retractor will lock in position during a collision. If the belt feels tight and hinders comfortable movement while the vehicle is stopped or in motion, you may be in the automatic locking mode because you have pulled the belt too far out. To return to the more comfortable emergency locking mode, wait until you can stop the vehicle in a safe area, retract the belt fully to convert it back to emergency locking mode and then again extend it around you.

Automatic Locking Mode

Always use the automatic locking mode to keep the child-restraint system from shifting to an unsafe position in the event of an accident. To get the seat belt into the automatic locking mode, pull it all the way out and connect it as instructed on the child-restraint system. It will retract down to the child-restraint system and stay locked on it. See the section on child restraint (page 2-21).

J56J_8R29_EA_02I_Edition4.book Page 12 Monday, April 21, 2003 3:44 PM

2-13

Essential Safety Equipment

Seat Belt Systems

Form No. 8R29-EA-02I

Fastening the Seat Belts

1. Grasp the buckle and tongue.

2. Slowly pull out the lap/shoulder belt.

3. Insert the tongue into the buckle until you hear a click.

4. Make sure the shoulder belt is snugly fitted against your body.

3-Point Type Seat Belt

NOTE

When using the rear center seat belt, refer to "Rear Center Position Seat Belt" (page 2-17).

Belt

Tongue

Tongue

Buckle

Positioning the Shoulder Portion of the Seat Belt: Improper positioning of the shoulder portion of the seat belt is dangerous. Always make sure the shoulder portion of the seat belt is positioned across your shoulder and near your neck, but never under your arm, on your neck, or on your upper arm.

Positioning the Lap Portion of the Seat Belt: The lap portion of the seat belt worn too high is dangerous. In a collision, this would concentrate the impact force directly on the abdominal area, causing serious injury. Wear the lap portion of the belt snugly and as low as possible.

WARNING

Keep low on hip bone

Take up slack

Too high

WARNING

J56J_8R29_EA_02I_Edition4.book Page 13 Monday, April 21, 2003 3:44 PM

2-14

Essential Safety Equipment

Seat Belt Systems

Form No. 8R29-EA-02I

Unfastening the Seat Belts

Depress the button on the buckle.

Shoulder Belt Adjuster

Adjust the height of the shoulder belt if the seat belt touches your neck, or if it crosses your arm instead of your shoulder. To raise the shoulder belt adjuster, push the adjuster up. To lower the shoulder belt adjuster, push the button and slide it down. Make sure the adjuster is locked.

NOTE

If a belt does not fully retract, inspect it for kinks and twists. If it is still not retracting properly, have it inspected at an Authorized Mazda Dealer.

Positioning the Shoulder Portion of the Seat Belt: Improper positioning of the shoulder portion of the seat belt is dangerous. Always make sure the shoulder portion of the seat belt is positioned across your shoulder and near your neck, but never under your arm, on your neck, or on your upper arm.

Shoulder belt adjuster

WARNING

J56J_8R29_EA_02I_Edition4.book Page 14 Monday, April 21, 2003 3:44 PM

2-15

Essential Safety Equipment

Seat Belt Systems

Form No. 8R29-EA-02I

For optimum protection, the driver and front passenger seat belts are equipped with pretensioner and load limiting systems. In moderate or greater frontal or near- frontal accidents, the front air bag and pretensioner systems deploy simultaneously. The pretensioners take up slack in the front seat belts as the air bags are expanding. The load limiting system releases belt webbing in a controlled manner to reduce belt force on the occupants chest.

Front Seat Belt Pretensioner and Load Limiting Systems Incorrect Positioning of the Driver

and Front Passenger Seat Belts: Incorrect positioning of the driver and passenger seat belts is dangerous. Without proper positioning, the pretensioner and load limiting systems cannot provide adequate protection in an accident and this could result in serious injury. Wear seat belts only as recommended in this owners manual.

Expended Seat Belt Pretensioners: Use of front seat belts with the pretensioner system expended is dangerous. The seat belt pretensioners will only function once. After they are expended, they will not work again and must be replaced immediately, even if there was no front seat occupant seated at the time. If the seat belt pretensioners are not replaced, the risk of injury in a collision will increase. Always have an Authorized Mazda Dealer inspect and replace the seat belt pretensioners after a collision.

WARNING

J56J_8R29_EA_02I_Edition4.book Page 15 Monday, April 21, 2003 3:44 PM

2-16

Essential Safety Equipment

Seat Belt Systems

Form No. 8R29-EA-02I

Modification or Testing of the Pretensioner System: Modifying the components or wiring of the pretensioner system, including the use of electronic testing devices is dangerous. You could accidentally activate it or make it inoperable which would prevent it from activating in an accident. The occupants could be seriously injured. Never modify the components or wiring, or use electronic testing devices on the pretensioner system.

Pretensioner System Disposal: Improper disposal of the pretensioner system or a vehicle with non- deactivated pretensioners is dangerous. Unless all safety procedures are followed, injury could result. Ask an Authorized Mazda Dealer how to safely dispose of the pretensioner system or how to scrap a pretensioner-equipped vehicle.

WARNING NOTE

The pretensioner system will only activate in a moderate or greater frontal or near-frontal collision. It will not activate in most rollovers, side or rear impacts.

Some smoke (non-toxic gas) will be released when the air bags and pretensioners deploy. This does not indicate a fire. This gas normally has no effect on occupants, however, those with sensitive skin may experience light skin irritation. If residue from the deployment of the air bags or the front pretensioner system gets on the skin or in the eyes, wash it off as soon as possible.

J56J_8R29_EA_02I_Edition4.book Page 16 Monday, April 21, 2003 3:44 PM

2-17

Essential Safety Equipment

Seat Belt Systems

Form No. 8R29-EA-02I

Air Bag/Front Seat Belt Pretensioner Systems Warning Light

If the air bag/front seat belt pretensioner system is OK, the warning light comes on when the ignition switch is turned to the ON position or after the engine is cranked. After about 6 seconds it goes out.

A system malfunction is indicated when the warning light constantly flashes, stays on or doesnt come on at all when the ignition switch is turned to the ON position. If any of these occur, consult an Authorized Mazda Dealer as soon as possible. The system may not work in an accident.

Before using the rear-center lap/shoulder belt make sure tongue (A) and anchor buckle (B) are fastened.

Fastening the Seat Belt

1. Grasp the buckle (D) and tongue (C).

2. Slowly pull out the lap/shoulder belt.

3. Insert the tongue (C) into the buckle (D) until you hear a click.

Self-Servicing the Air Bag/ Pretensioner Systems: Self-servicing or tampering with the systems is dangerous. An air bag/ pretensioner could accidentally activate or become disabled. This could cause serious injuries. Never tamper with the systems and always have an Authorized Mazda Dealer perform all servicing and repairs.

WARNING

Rear Center Position Seat Belt

(A)

(B)

(C)

(D)

(A)

(B)

J56J_8R29_EA_02I_Edition4.book Page 17 Monday, April 21, 2003 3:44 PM

2-18

Essential Safety Equipment

Seat Belt Systems

Form No. 8R29-EA-02I

4. Make sure the shoulder belt is snugly fitted against your body.

Unfastening the Seat Belt

Depress the button on the buckle.

Fastening the Rear-Center Seat Belt with Only One Buckle: Fastening the rear-center seat belt with only one buckle is dangerous. If only one pair of seat belt tongue and buckle, either tongue (A) and anchor buckle (B) or tongue (C) and anchor buckle (D), is fastened, the seat belt cannot provide full protection. In a sudden stop or collision, the user could slide under the belt and suffer serious injuries. Always make sure that both pairs of seat belt tongues and buckles are fastened properly.

Positioning the Shoulder Portion of the Seat Belt: Improper positioning of the shoulder portion of the seat belt is dangerous. Always make sure the shoulder portion of the seat belt is positioned across your shoulder and near your neck, but never under your arm, on your neck, or on your upper arm.

Using Rear-Center Seat Belt: Using the rear-center seat belt with the rear-left head restraint removed is dangerous. The seat belt will not provide adequate protection with the rear-left head restraint removed because the seat belt is not positioned properly. The user could be seriously injured in an accident. Always use the rear-center seat belt with the rear-left head restraint installed.

WARNING Positioning the Lap Portion of the Seat Belt: The lap portion of the seat belt worn too high is dangerous. In a collision, this would concentrate the impact force directly on the abdominal area, causing serious injury. Wear the lap portion of the belt snugly and as low as possible.

WARNING

J56J_8R29_EA_02I_Edition4.book Page 18 Monday, April 21, 2003 3:44 PM

2-19

Essential Safety Equipment

Seat Belt Systems

Form No. 8R29-EA-02I

Unfastening the Lap Portion of the Seat Belt

Insert a small object in the anchor buckle (B) slot, such as a key.

Fastening the Lap Portion of the Seat Belt

Grasp tongue (A) and insert it into the anchor buckle (B) until you hear a click. It is now secure for passenger use.

If your seat belt is not long enough, even when fully extended, a seat belt extender may be available to you at no charge from your Authorized Mazda Dealer. This extender will be only for you and for the particular vehicle and seat. Even if it plugs into other seat belts, it may not hold in the critical moment of a crash. When ordering an extender, only order one that provides the necessary additional length to fasten the seat belt properly. Please contact your Authorized Mazda Dealer for more information.

Always unfasten the lap portion of the belt before folding the rear-left seatback. Leaving the lap portion of the belt fastened could cause damage to the seat belt, buckle and seatback.

NOTE

After returning the rear-left seatback to its upright position, fasten the lap portion of the belt.

(A)

(B)

CAUTION

Seat Belt Extender

J56J_8R29_EA_02I_Edition4.book Page 19 Monday, April 21, 2003 3:44 PM

2-20

Essential Safety Equipment

Seat Belt Systems

Form No. 8R29-EA-02I

If the drivers seat belt is not fastened when the ignition switch is turned to the ON position, the seat belt warning light will remain on until the belt is fastened. If the system does not operate correctly, consult an Authorized Mazda Dealer.

Unnecessary Use of an Extender: Using a seat belt extender when not necessary is dangerous. The seat belt will be too long and not fit properly. In an accident, the seat belt will not provide adequate protection and you could be seriously injured. Only use the extender when it is required to fasten the seat belt properly.

Using an Improper Extender: Using a seat belt extender that is for another person or a different vehicle or seat is dangerous. The seat belt will not provide adequate protection and the user could be seriously injured in an accident. Only use the extender provided for you and for the particular vehicle and seat. NEVER use the extender in a different vehicle or seat.

Using an Extender That is Too Long: Using an extender that is too long is dangerous. The seat belt will not fit properly. In an accident, the seat belt will not provide adequate protection and you could be seriously injured. Dont use the extender or choose one shorter in length if the distance between the extenders buckle and the center of the users body is less than 15cm (6 in).

WARNING Seat Belt Warning Light

J56J_8R29_EA_02I_Edition4.book Page 20 Monday, April 21, 2003 3:44 PM

2-21

Essential Safety Equipment

Form No. 8R29-EA-02I

Child Restraint

Mazda strongly urges the use of child-restraint systems for children small enough to use them.

You are required by law to use a child-restraint system for children in the U.S. and Canada. Check your local and state or provincial laws for specific requirements regarding the safety of children riding in your vehicle.

Whatever child-restraint system you consider, please pick the appropriate one for the age and size of the child, obey the law and follow the instructions that come with the individual child-restraint system.

A child who has outgrown child-restraint systems should sit in the rear and use seat belts, both lap and shoulder. If the shoulder belt crosses the neck or face, move the child closer to the center of the vehicle in the outboard seats, and towards the buckle on the right if the child is seated in the center seat.

Statistics confirm that the rear seat is the best place for all children up to 12 years of age- the more so with a supplemental restraint system (air bags).

A rear-facing child-restraint system should NEVER be used in the front seat because it would be too close to the air bag. The front passengers seat is also the least preferred seat for other child-restraint systems.

Child Restraint Precautions

J56J_8R29_EA_02I_Edition4.book Page 21 Monday, April 21, 2003 3:44 PM

2-22

Essential Safety Equipment

Child Restraint

Form No. 8R29-EA-02I

Proper Size of Child-Restraint System: For effective protection in vehicle accidents and sudden stops, a child must be properly restrained using a seat belt or child-restraint system depending on age and size. If not, the child could be seriously injured or even killed in an accident.

Follow the Manufacturers Instructions and Always Keep the Child-Restraint System Buckled Down: An unsecured child-restraint system is dangerous. In a sudden stop or a collision it could move causing serious injury or death to the child or other occupants. Make sure the child-restraint system is properly secured in place according to the child-restraint system manufacturers instructions. When not in use, remove it from the vehicle or fasten it with a seat belt, or latch it down to BOTH LATCH lower anchors for LATCH child-restraint systems.

Holding a Child While the Vehicle is Moving: Holding a child in your arms while the vehicle is moving is extremely dangerous. No matter how strong the person may be, he or she cannot hold onto a child in a sudden stop or collision and it could result in serious injury or death to the child or other occupants. Even in a moderate accident, the child may be exposed to air bag forces that could result in serious injury or death to the child, or the child may be slammed into the adult, injuring the adult. Always secure a child in a proper child-restraint system.

Rear-Facing Child-Restraint System: Rear-facing child-restraint systems on the front seat are particularly dangerous. The child-restraint system can be hit by a deploying air bag and moved violently backward resulting in serious injury or death to the child. NEVER use a rear-facing child-restraint system in the front seat with an air bag that could deploy.

WARNING

Deploying air bag

J56J_8R29_EA_02I_Edition4.book Page 22 Monday, April 21, 2003 3:44 PM

2-23

Essential Safety Equipment

Child Restraint

Form No. 8R29-EA-02I

Children and Seating Position with Side and Curtain Air Bags: Allowing anyone to lean over or against the front or rear doors is dangerous. If the vehicle is equipped with side and curtain air bags, the impact of inflation could cause serious injury or death to the person. Children are more likely to sleep in the vehicle; when they do, they are more at risk in the front passengers seat that have a side air bag because they may slump over into the path of the air bags.Furthermore, leaning over or against the doors could block the side and curtain air bags and eliminate the advantages of supplemental protection.With the front air bag and the additional side air bag that comes out of the front seat, the rear seat is always a better location for children who are prone to sleeping. Do not allow a child to lean over or against the doors, even if the child is seated in a child-restraint system.

One Belt, One Passenger: Using one seat belt for more than one person at a time is dangerous. A seat belt used in this way cant spread the impact forces properly and the two passengers could be crushed together and seriously injured or even killed. Never use one belt for more than one person at a time.

Operating the Remote Handle Levers While a Rear-Facing Child-Restraint System is in the Rear Seat: Operating the remote handle levers while a rear-facing child-restraint system is in the rear seat is dangerous. It could cause injury to a child seated in the child-restraint system when the seatback suddenly flips forward. Always remove the child-restraint system from the rear seat before operating the remote handle levers for the rear seat.

A seat belt or child-restraint system can become very hot in a closed vehicle during warm weather. To avoid burning yourself or a child, check them before you or your child touches them.

NOTE

Your Mazda is equipped with LATCH lower anchors for attachment of specially designed LATCH child-restraint systems in the rear seat. When using these anchors to secure a child-restraint system, refer to "LATCH Child-Restraint Systems" (page 2-29).

WARNING

CAUTION

J56J_8R29_EA_02I_Edition4.book Page 23 Monday, April 21, 2003 3:44 PM

2-24

Essential Safety Equipment

Child Restraint

Form No. 8R29-EA-02I

Accident statistics reveal that a child is safer in the rear seat. The front passengers seat is clearly the worst choice for any child under 12, and with rear-facing child-restraint systems it is clearly unsafe due to air bags.

Some child-restraint systems now come with tethers and therefore must be installed on the seats that take tethers to be effective. In your Mazda, tethered child-restraint systems can only be accommodated in the three positions on the rear seat.

Some child-restraint systems also employ specially designed LATCH attachments; refer to "LATCH Child-Restraint Systems" (page 2-29).

Rear Seat Child-Restraint System Installation

Follow these instructions when using a child-restraint system, unless you are attaching a LATCH-equipped child- restraint system to the rear LATCH lower anchors. Refer to "LATCH Child- Restraint Systems" (page 2-29).

1. Secure the child-restraint system with the lap portion of the lap/shoulder belt. See the instructions on the child- restraint system for belt routing instructions.

2. To get the retractor into the automatic locking mode, pull the shoulder belt portion of the seat belt until the entire length of the belt is out of the retractor.

Installing Child-Restraint Systems

Tethered Child-Restraint Systems Work Only on Tether-Equipped Rear Seats: Installation of a tether equipped child-restraint system in the front passengers seat defeats the safety design of the system and will result in an increased chance of serious injury if the child-restraint system goes forward without benefit of being tethered. Place tether equipped child-restraint systems where there are tether anchors.

WARNING

NOTE

Follow the child-restraint system manufacturers instructions carefully. If you are not sure whether you have a LATCH system or tether, check in the child-restraint system manufacturers instructions and follow them accordingly. Depending on the type of child-restraint system, it may not employ seat belts which are in automatic locking mode.

J56J_8R29_EA_02I_Edition4.book Page 24 Monday, April 21, 2003 3:44 PM

2-25

Essential Safety Equipment

Child Restraint

Form No. 8R29-EA-02I

3. Push the child-restraint system firmly into the vehicle seat. Be sure the belt retracts as snugly as possible. Clicking from the retractor will be heard during retraction if the system is in the automatic locking mode. If the belt does not lock the seat down tight, repeat this step.

4. If your child-restraint system requires the use of a tether strap, hook and tighten the tether strap by following the manufacturers instructions.

NOTE

Inspect this function before each use of the child-restraint system. You should not be able to pull the shoulder belt out of the retractor while the system is in the automatic locking mode. When you remove the child-restraint system, be sure the belt fully retracts to return the system to emergency locking mode before occupants use the seat belts.

Child-Restraint Tether Usage: Using the tether to secure anything but a child-restraint system is dangerous. This could weaken or damage the tether or tether anchor and result in injury. Use the tether and tether anchor only for a child- restraint system.

For rear right seat

For rear left seatAnchor bracket location

For rear center seat

Cover

Open

Tether strap

Tether strap position

Anchor bracket

WARNING

J56J_8R29_EA_02I_Edition4.book Page 25 Monday, April 21, 2003 3:44 PM

2-26

Essential Safety Equipment

Child Restraint

Form No. 8R29-EA-02I

If You Must Use the Front Seat for Children

If you cannot put all children in the rear seat, at least put the smallest in the rear and be sure the largest child up front uses the shoulder belt over the shoulder. Do not put rear-facing child-restraint systems on the front passengers seat. This seat is also not set up for tethered child-restraint systems, put them in one of the three rear seat positions set up with tether anchors. Likewise the LATCH child-restraint system cannot be secured in the front passengers seat and should be used in the rear seat. Dont allow anyone to sleep against the right front door if you have an optional side air bag, it could cause serious injuries to an out of position occupant. As children more often sleep in cars, it is better to put them in the rear seat. If installing the child-restraint system on the front seat is unavoidable, follow these instructions when using a front-facing child-restraint system in the front passengers seat.

NOTE

To check if your Mazda front seats have side air bags: Every Mazda side air bag will have a "SRS-Air Bag" label on the outboard shoulder of the front seats.

Front Passengers Seat Position: As your vehicle has front air bags and doubly so if your vehicle has side air bags, a front-facing child-restraint system should be put on the front seat only when it is unavoidable. Always move the seat as far back as possible, because the force of a deploying air bag could cause serious injury or death to the child.

Rear-Facing Child-Restraint System: Rear-facing child-restraint systems on the front seat are particularly dangerous. The child-restraint system can be hit by a deploying air bag and moved violently backward resulting in serious injury or death to the child. NEVER use a rear-facing child- restraint system in the front seat with an air bag that could deploy.

WARNING

J56J_8R29_EA_02I_Edition4.book Page 26 Monday, April 21, 2003 3:44 PM

2-27

Essential Safety Equipment

Child Restraint

Form No. 8R29-EA-02I

Front Passengers Seat Child- Restraint System Installation

1. Slide the seat as far back as possible.

2. Secure the child-restraint system with the lap portion of the lap/shoulder belt. See the instructions on the child- restraint system for belt routing instructions.

3. To get the retractor into the automatic locking mode, pull the shoulder belt portion of the seat belt until the entire length of the belt is out of the retractor.

4. Push the child-restraint system firmly into the vehicle seat. Be sure the belt retracts as snugly as possible. Clicking from the retractor will be heard during retraction if the system is in automatic locking mode. If the belt does not lock the seat down tight, repeat this step.

Children and Seating Position with Side and Curtain Air Bags: Allowing anyone to lean over or against the front or rear doors is dangerous. If the vehicle is equipped with side and curtain air bags, the impact of inflation could cause serious injury or death to the person. Children are more likely to sleep in the vehicle; when they do, they are more at risk in the front passengers seat that have a side air bag because they may slump over into the path of the air bags.Furthermore, leaning over or against the doors could block the side and curtain air bags and eliminate the advantages of supplemental protection.With the front air bag and the additional side air bag that comes out of the front seat, the rear seat is always a better location for children who are prone to sleeping. Do not allow a child to lean over or against the doors, even if the child is seated in a child-restraint system.

WARNING

J56J_8R29_EA_02I_Edition4.book Page 27 Monday, April 21, 2003 3:44 PM

2-28

Essential Safety Equipment

Child Restraint

Form No. 8R29-EA-02I

NOTE

Inspect this function before each use of the child-restraint system. You should not be able to pull the shoulder belt out of the retractor while the system is in the automatic locking mode. When you remove the child-restraint system, be sure the belt fully retracts to return the system to emergency locking mode before occupants use the seat belts.

Follow the child-restraint system manufacturers instruction carefully. Depending on the type of child- restraint system, it may not employ seat belts which are in automatic locking mode.

J56J_8R29_EA_02I_Edition4.book Page 28 Monday, April 21, 2003 3:44 PM

2-29

Essential Safety Equipment

Child Restraint

Form No. 8R29-EA-02I

Your Mazda is equipped with LATCH lower anchors for attachment of specially designed LATCH child-restraint systems in the rear seat. Both anchors must be used, otherwise the seat will bounce around and put the child in danger. Some LATCH child-restraint systems must also be used in conjunction with a tether to be effective. If they have a tether you must use it to better assure your childs safety.

LATCH Child-Restraint Systems

Manufacturers Instructions for Child-Restraint System: An unsecured child-restraint system is dangerous. In a sudden stop or a collision it could move causing serious injury or death to the child or other occupants. Make sure the child-restraint system is properly secured in place according to the child-restraint system manufacturers instructions.

Attaching Two Child-Restraint Systems to the Same LATCH Lower Anchor: Attaching two child-restraint systems to the same LATCH lower anchor is dangerous. In a collision, one anchor may not be strong enough to hold two child-restraint system attachments and may break, causing serious injury or death. If you use the seat position for another child-restraint system when an outboard LATCH position is occupied, use the center seat belts instead, and the tether if tether-equipped.

Unsecured Child-Restraint System: An unsecured child-restraint system is dangerous. In a sudden stop or a collision it could move causing serious injury or death to the child or other occupants. Follow the child-restraint system manufacturers instructions on belt routing to secure the seat just as you would with a child in it so that nobody is tempted to put a child in an improperly secured seat later on. When not in use, remove it from the vehicle or fasten it with a seat belt, or latch it down to BOTH LATCH lower anchors for LATCH child- restraint systems.

LATCH Child-Restraint Systems: Not following the child-restraint system manufacturers instructions when installing the child-restraint system is dangerous. If seat belts or a foreign object prevent the child-restraint system from being securely attached to the LATCH lower anchors and the child-restraint system is installed improperly, the child-restraint system could move in a sudden stop or collision causing serious injury or death to the child or other occupants. When installing the child-restraint system, make sure there are no seat belts or foreign objects near or around the LATCH lower anchors. Always follow the child-restraint system manufacturers instructions.

WARNING

J56J_8R29_EA_02I_Edition4.book Page 29 Monday, April 21, 2003 3:44 PM

2-30

Essential Safety Equipment

Child Restraint

Form No. 8R29-EA-02I

LATCH Child-Restraint System Installation Procedure (Rear Outboard Seats)

1. Expand the area between the seat bottom and the seatback slightly to verify the locations of the LATCH lower anchors.

2. Secure the child-restraint system using BOTH LATCH lower anchors, following the child-restraint system manufacturers instruction.

3. If your child-restraint system came equipped with a tether, that probably means it is very important to properly secure the tether for child safety, please carefully follow the child-restraint system manufacturers instructions when installing tethers.

NOTE

The markings above the LATCH lower anchors indicate the locations of LATCH lower anchors for the attachment of a child-restraint system.

LATCH lower anchor

Marking For rear left seat

For rear right seat

Child-Restraint Tether Usage: Using the tether to secure anything but a child-restraint system is dangerous. This could weaken or damage the tether or tether anchor and result in injury. Use the tether and tether anchor only for a child- restraint system.

For rear right seat

For rear left seatAnchor bracket location

Cover

Open

Anchor bracket

Tether strap position Tether strap

WARNING

J56J_8R29_EA_02I_Edition4.book Page 30 Monday, April 21, 2003 3:44 PM

2-31

Essential Safety Equipment

Child Restraint

Form No. 8R29-EA-02I

LATCH Child-Restraint System Installation Procedure (Rear Center Seat)

The LATCH lower anchors at the center of the rear seat are much further apart than the sets of LATCH lower anchors for child-restraint system installation at other seating positions. Child-restraint systems with rigid LATCH attachments cannot be installed on the center seating position. Some LATCH equipped child-restraint systems can be placed in the center position and will reach the nearest LATCH lower anchors which are 466 mm (18.35 in) apart. LATCH compatible child-restraint systems (with attachments on belt webbing) can be used at this seating position only if the child-restraint system instructions state that the child- restraint system can be installed to LATCH lower anchors that are 466 mm (18.35 in) apart. Do not attach two child- restraint systems to the same LATCH lower anchor. If any child-restraint system has a tether, it must be used also for your childs optimum safety.

1. Expand the area between the seat bottom and the seatback slightly to verify the locations of the LATCH lower anchors.

2. Secure the child-restraint system using BOTH LATCH lower anchors, following the child-restraint system manufacturers instructions.

3. If your child-restraint system came equipped with a tether, that probably means it is very important to properly secure the tether for child safety, please carefully follow the child-restraint system manufacturers instructions when installing tethers.

For rear center seat

LATCH lower anchor

Marking

NOTE

The markings above the LATCH lower anchors indicate the locations of LATCH lower anchors for the attachment of a child-restraint system.

Anchor bracket location

For rear center seat

Cover

Open

Anchor bracket

Tether strap position Tether strap

J56J_8R29_EA_02I_Edition4.book Page 31 Monday, April 21, 2003 3:44 PM

2-32

Essential Safety Equipment

Child Restraint

Form No. 8R29-EA-02I

Child-Restraint Tether Usage: Using the tether to secure anything but a child-restraint system is dangerous. This could weaken or damage the tether or tether anchor and result in injury. Use the tether and tether anchor only for a child- restraint system.

WARNING

J56J_8R29_EA_02I_Edition4.book Page 32 Monday, April 21, 2003 3:44 PM

2-33

Essential Safety Equipment

Form No. 8R29-EA-02I

SRS Air Bags

Read this owners manual carefully to verify what air bags (driver-side air bag, passenger- side air bag, side and curtain air bags) are equipped in your vehicle.

The front and side supplemental restraint systems (SRS) include up to 6 air bags (verify "SRS AIR BAG" location indicator marks). They are located in:

The steering wheel hub

The passenger side dashboard

The outboard sides of the front seatbacks (If equipped with side air bags.)

The front and rear window pillars, and the roof edge along both sides (If equipped with curtain air bags.)

These systems operate independently depending on the type of accident encountered; if you have side and curtain air bags, the side and curtain air bags are not likely to deploy on both sides in the same accident because a vehicle is not often hit from both sides. The side and curtain air bags work together but they and the frontal air bag system will not normally deploy during the same type of accident unless a combination of frontal and side impacts occur.

The air bag supplemental restraint systems are designed to provide supplemental protection only in the front seats in certain situations and the rear outside passenger positions only in same-side collisions, so seat belts become important in the following ways:

Without seat belt usage, the air bags cannot provide adequate protection during an accident. Seat belt usage is necessary to:

Keep the passenger away from an inflating air bag.

Reduce the possibility of injuries during an accident that is not designed for air bag inflation, such as roll-over or rear impact.

Reduce the possibility of injuries in frontal or side collisions that are not severe enough to activate the air bags.

Reduce the possibility of being thrown from your vehicle.

Reduce the possibility of injuries to lower body and legs during an accident because the air bags provide no protection to these parts.

Hold the driver in a position which allows better control of the vehicle.

Supplemental Restraint Systems (SRS) Precautions

J56J_8R29_EA_02I_Edition4.book Page 33 Monday, April 21, 2003 3:44 PM

2-34

Essential Safety Equipment

SRS Air Bags

Form No. 8R29-EA-02I

Small children should be protected by a child-restraint system. In certain regions, larger children must use a child-restraint system (page 2-21). Carefully consider which child-restraint system is necessary for your child and follow the installation directions in this Owners Manual as well as the child-restraint system manufacturers instructions.

Air Bags without Seat Belts: Depending only on the air bags for protection during an accident is dangerous. Alone, air bags may not prevent serious injuries. The appropriate air bags can be expected to inflate only in collisions with frontal, near frontal or side forces that are at least moderate. Vehicle occupants should always wear seat belts.

Child in the Front Seat: Placing a child, 12 years or under, in the front seat is dangerous. The child could be hit by a deploying air bag and be seriously injured or even killed. A sleeping child is more likely to lean against the door and be hit by the side air bag in a moderate, right- side collision. Whenever possible, always secure a child 12 years and under on the rear seat with an appropriate child-restraint system for the childs age and size.

Rear-Facing Child-Restraint System: Rear-facing child-restraint systems on the front seat are particularly dangerous. The child-restraint system can be hit by a deploying air bag and moved violently backward resulting in serious injury or death to the child. NEVER use a rear-facing child-restraint system in the front seat with an air bag that could deploy.

Seating Position with Front Air Bags: Sitting too close to the air bag storage compartments or placing hands or feet on them is extremely dangerous. Front Air bags inflate with great force and speed. Serious injuries could occur if someone is too close. The driver should always hold onto only the rim of the steering wheel. The front seat passenger should keep both feet on the floor. Front seat occupants should adjust their seats as far back as possible and always sit upright against the seatbacks with seat belts worn properly.

WARNING

Deploying air bag

J56J_8R29_EA_02I_Edition4.book Page 34 Monday, April 21, 2003 3:44 PM

2-35

Essential Safety Equipment

SRS Air Bags

Form No. 8R29-EA-02I

Seating Position with Side and Curtain Air Bags: Sitting too close to the side and curtain air bag storage compartments or placing hands on them is extremely dangerous. The side and curtain air bags inflate with great force and speed directly out of the outboard side of the front seat, and the front and rear window pillars along the roof edge, expanding along the front and rear doors on the side the car is hit. Serious injury could occur if someone is sitting too close to the door or leaning against a window, or if rear seat occupants grab the sides of the front seatbacks. Furthermore, sleeping up against the door or hanging out the windows in the vehicle could block the side and curtain air bags and eliminate the advantages of supplemental protection. Give the side and curtain air bags room to work by sitting in the center of the seat while the vehicle is moving with seat belts worn properly.

Front Air Bag Storage Areas: Attaching an object to a front air bag storage area or placing something in front of it is dangerous. In an accident, the object could interfere with front air bag inflation and injure the occupants. Always keep the front air bag storage areas free of objects.

Side Air Bag Storage Areas: Attaching things to the front seat in such a way as to cover the outboard side of the seat in any way is dangerous. In an accident the object could interfere with the side air bag, which inflates from the outboard side of the front seats, impeding the added protection of the side air bag system or redirecting the air bag in a way that is dangerous. Furthermore, the bag could be cut open spewing exhaust. Do not hang net bags, map pouches or back pads with side straps on the front seats. Never use seat covers on the front seats. Always keep the side air bag storage areas in your front seats free to deploy in the event of a side collision.

Curtain Air Bag Storage Areas: Attaching objects to the areas where the curtain air bag activates such as on the windshield glass, side door glass, front and rear window pillars and along the roof edge and assist grips is dangerous. In an accident the object could interfere with the curtain air bag, which inflates from the front and rear window pillars and along the roof edge, impeding the added protection of the curtain air bag system or redirecting the air bag in a way that is dangerous. Furthermore, the bag could be cut open spewing exhaust. Do not place hangers or any other objects on the assist grips. When hanging clothes, hang them on the coat hook directly. Always keep the curtain air bag storage areas free to deploy in the event of a side collision.

WARNING

J56J_8R29_EA_02I_Edition4.book Page 35 Monday, April 21, 2003 3:44 PM

2-36

Essential Safety Equipment

SRS Air Bags

Form No. 8R29-EA-02I

Hot Air Bag Inflators: Hot air bag inflators are dangerous. Immediately after inflation, the inflators in the steering wheel, dashboard, seatbacks, or the front and rear window pillars and along the roof edge are very hot. You could get burned. Dont touch the internal components of the air bag storage areas after the bags have inflated.

Installation of Front-End Equipment: Installation of front-end equipment, such as frontal protection bar (kangaroo bar, bull bar, push bar, etc.), snowplow, or winches, is dangerous. The air bag crash sensor system could be affected. This could cause air bags to inflate unexpectedly, or it could prevent the air bags from inflating during an accident. Front occupants could be seriously injured. Never install any front-end equipment to your vehicle.

Suspension Adjustment: Adjusting the vehicle suspension is dangerous. If the vehicles height or the suspension is changed, the vehicle will be unable to accurately detect a collision resulting in incorrect or unexpected air bag deployment and the possibility of serious injuries.

Modification of the Supplemental Restraint System: Modifying the components or wiring of the supplemental restraint system is dangerous. You could accidentally activate it or make it inoperable. Dont make any modifications to the supplemental restraint system. This includes installing trim, badges, or anything else over the air bag storage areas. It also includes installing extra electric equipment on or near system components or wiring. An Authorized Mazda Dealer can provide the special care needed in the removal and installation of front seats. It is important to protect the side and curtain air bag wiring and connections to assure that the bags do not accidentally deploy and that the seats retain an undamaged air bag connection.

To prevent damage to the side and curtain air bag wiring, dont place luggage or other objects under the front seats.

WARNING

CAUTION

J56J_8R29_EA_02I_Edition4.book Page 36 Monday, April 21, 2003 3:44 PM

2-37

Essential Safety Equipment

SRS Air Bags

Form No. 8R29-EA-02I

NOTE

When an air bag deploys, a loud inflation noise can be heard and some smoke will be released. Neither is likely to cause injury, however, the texture of the air bags may cause light skin injuries on body parts not covered with clothing through friction.

Should you sell your Mazda, we urge you to tell the new owner of its air bag systems and that familiarization with all instructions about them, from the Owners Manual, is important.

J56J_8R29_EA_02I_Edition4.book Page 37 Monday, April 21, 2003 3:44 PM

2-38

Essential Safety Equipment

SRS Air Bags

Form No. 8R29-EA-02I

The supplemental restraint systems (SRS) have two basic subsystems:

The air bag system with inflators and air bags.

The electric system with crash sensors and diagnostic module.

The air bags are mounted in the following locations: the center of the steering wheel, the passenger-side of the dashboard, in the outboard sides of the front seatbacks and the front and rear window pillars*, along the roof edge*. They are out of sight until activated.

*If equipped. *1The drivers seat slide position sensor determines whether the drivers seat is fore or aft

of a reference position. The sensor is designed to control the deployment of the drivers air bag depending on how close the drivers seat is to the steering wheel.

*2The buckle switches on the front seat belts determine whether or not the front seat belts are securely fastened and further control the deployment of the air bags on the front seats.

Air Bag System Description

Dual stage inflators and air bags*3

Inflators and air bags Seat belt buckle switches*2

Front air bag sensor

Side and curtain air bag crash sensor*

Seat slide position sensor (only for driver's seat)*1

Inflators and air bags Side and curtain air bag crash sensor*

Crash sensors and diagnostic module (SAS unit)

J56J_8R29_EA_02I_Edition4.book Page 38 Monday, April 21, 2003 3:44 PM

2-39

Essential Safety Equipment

SRS Air Bags

Form No. 8R29-EA-02I

*3The front, dual stage air bags control air bag inflation in two energy stages. During an impact of moderate severity the front air bags deploy with lesser energy, whereas during more severe impacts, they deploy with more energy. Deployment of the front air bags may differ between the driver and the front passenger depending on the drivers seat position and front seat belt usage, which allow for further controlling of the system.

How the Air Bags Work

When air bag crash sensors detect a frontal or side impact of greater than moderate force, an electrical current is sent to the inflators. Gases are produced to inflate the air bags and after the inflation, the air bags quickly deflate. The air bags will function only once. After that, the air bags will not work again and must be replaced. Only an Authorized Mazda Dealer can replace the systems.

The side air bag will deploy only on the side the vehicle receives the force of the impact.

The curtain air bag will deploy only on the side the vehicle receives the force of the impact.

J56J_8R29_EA_02I_Edition4.book Page 39 Monday, April 21, 2003 3:44 PM

2-40

Essential Safety Equipment

SRS Air Bags

Form No. 8R29-EA-02I

Air Bag Activation/Deactivation

Front air bag activation

A greater than moderate impact will cause the front air bags to inflate in the following cases:

Hitting a solid wall straight on at greater than about 22 km/h (14 mph).

Frontal impact within about a 30 degree range from head-on to the vehicle.

Driving into a big hole or hitting the far side of a hole.

Hitting a curb, pavement edge or hard object.

Landing hard or the vehicle falling.

J56J_8R29_EA_02I_Edition4.book Page 40 Monday, April 21, 2003 3:44 PM

2-41

Essential Safety Equipment

SRS Air Bags

Form No. 8R29-EA-02I

Limitations to front air bag activation

Depending on the severity of impact, the front air bags may not inflate in the following cases:

Impacts involving trees or poles cause severe cosmetic damage but may not have enough impact to activate the air bag.

Rear-ending or running under a truck's tail gate may not provide the stopping force necessary for air bag deployment.

Frontal offset impact to the vehicle may not provide the stopping force necessary for air bag deployment.

J56J_8R29_EA_02I_Edition4.book Page 41 Monday, April 21, 2003 3:44 PM

2-42

Essential Safety Equipment

SRS Air Bags

Form No. 8R29-EA-02I

Non-activation of front air bags

Front air bags will not normally inflate in the following cases:

Side* and curtain* air bag activation (*If equipped.)

Greater than moderate impact to one side of the vehicle (driver or passenger side areas) will cause the side and curtain air bags to inflate, but it will not normally deploy the front air bags.

Collision from the rear.

Impact to the side, but it may deploy the side* and curtain* air bags.

Vehicle roll-over, may deploy the side* and curtain* air bags but not the front air bags.

*If equipped.

J56J_8R29_EA_02I_Edition4.book Page 42 Monday, April 21, 2003 3:44 PM

2-43

Essential Safety Equipment

SRS Air Bags

Form No. 8R29-EA-02I

Limitations to side* and curtain* air bag activation (*If equipped.)

Depending on the severity of impact, the side and curtain air bags may not inflate in the following cases:

Non-activation of side* and curtain* air bag (*If equipped.)

The side and curtain air bags will not normally inflate in the following cases:

Side impacts involving trees or poles can cause severe cosmetic damage but may not have enough impact force to activate the side* and curtain* air bags.

Side impacts with two-wheeled vehicles may not provide enough force to deploy the side* and curtain* air bags.

Vehicle roll-over may not provide enough side force to deploy the side* and curtain* air bags.

Frontal offset impact may not provide enough side impact to deploy the side* and curtain* air bags.

Collision from the rear. Collision from the front, but it may deploy the front air bags.

J56J_8R29_EA_02I_Edition4.book Page 43 Monday, April 21, 2003 3:44 PM

2-44

Essential Safety Equipment

SRS Air Bags

Form No. 8R29-EA-02I

Constant Monitoring

The following components of the air bag systems are monitored by a diagnostic system:

SAS unit

Front air bag sensor

Air bag modules

Side* and curtain* air bag crash sensor (*If equipped.)

Front seat belt pretensioners

Related wiring

Drivers seat slide position sensor

Front seat belt buckle switches

A diagnostic module continuously monitors the systems readiness. This begins when the ignition switch is turned to the ON position and continues while the vehicle is being driven.

Air Bag/Front Seat Belt Pretensioner Systems Warning Light

If the air bag/front seat belt pretensioner system is OK, the warning light comes on when the ignition switch is turned to the ON position or after the engine is cranked. After about 6 seconds it goes out.

A system malfunction is indicated when the warning light constantly flashes, stays on or doesnt come on at all when the ignition switch is turned to the ON position. If any of these occur, consult an Authorized Mazda Dealer as soon as possible. The system may not work in an accident.

Self-Servicing the Air Bag/ Pretensioner Systems: Self-servicing or tampering with the systems is dangerous. An air bag/ pretensioner could accidentally activate or become disabled. This could cause serious injuries. Never tamper with the systems and always have an Authorized Mazda Dealer perform all servicing and repairs.

WARNING

J56J_8R29_EA_02I_Edition4.book Page 44 Monday, April 21, 2003 3:44 PM

2-45

Essential Safety Equipment

SRS Air Bags

Form No. 8R29-EA-02I

Maintenance

The air bag systems do not require regular maintenance. But if any of the following occurs, take your vehicle to an Authorized Mazda Dealer as soon as possible:

The air bag system warning light flashes.

The air bag system warning light stays on.

The air bag system warning light stays off when the ignition switch is turned to the ON position.

The air bags inflate.

Damaged Air Bag Sensors: Driving with damaged air bag sensors is dangerous. A collision, even one not strong enough to inflate the air bags, could damage the sensors. If there was a subsequent collision, a damaged sensor would not inflate the air bags. Always have an Authorized Mazda Dealer inspect the air bag systems after a collision.

Removing Interior Parts: Removing any components such as the front seat, front dashboard, the steering wheel or parts on the front and rear window pillars* and along the roof edge*, containing air bag parts or sensors is dangerous. These parts contain essential air bag parts. The air bag could accidentally activate and cause serious injuries. Always have an Authorized Mazda Dealer remove these parts. *If equipped with side or curtain air bags.

Air Bag Disposal: Improper disposal of an air bag or a vehicle with live air bags in it can be extremely dangerous. Unless all safety procedures are followed, injury can result. Ask an Authorized Mazda Dealer how to safely dispose of an air bag or how to scrap an air bag equipped vehicle.

WARNING

J56J_8R29_EA_02I_Edition4.book Page 45 Monday, April 21, 2003 3:44 PM

2-46

Form No. 8R29-EA-02I

J56J_8R29_EA_02I_Edition4.book Page 46 Monday, April 21, 2003 3:44 PM

3-1

Form No. 8R29-EA-02I

3 Knowing Your Mazda

Explanation of basic operations and controls; opening/closing and adjustment of various parts.

Doors and Locks ............................................................................ 3-2 Keys ........................................................................................... 3-2 Keyless Entry System ................................................................ 3-3 Door Locks ................................................................................ 3-7 Trunk Lid ................................................................................. 3-10 Trunk Release Slide Lever ....................................................... 3-12 Power Windows ....................................................................... 3-14 Fuel-Filler Lid and Cap ........................................................... 3-16 Hood ........................................................................................ 3-17 Sunroof .................................................................................... 3-18

Security System ........................................................................... 3-20 Immobilizer System ................................................................ 3-20 Theft-Deterrent System ........................................................... 3-22

Steering Wheel and Mirrors ...................................................... 3-25 Steering Wheel ........................................................................ 3-25 Mirrors ..................................................................................... 3-25

J56J_8R29_EA_02I_Edition4.book Page 1 Monday, April 21, 2003 3:44 PM

3-2

Knowing Your Mazda

Form No. 8R29-EA-02I

Doors and Locks

Your Mazda has two kinds of keys: primary and secondary.

Heres what the keys are used for:

If you must leave your vehicle with another person, such as a parking attendant, protect items by locking the glove box and trunk lid with the primary key. Keep that key and give the other person only the secondary key.

A code number is stamped on the plate attached to the key set; detach this plate and store it in a safe place (not in the vehicle) for use if you need to make a replacement key.

Also write down the code number and keep it in another safe and handy place, but not in the vehicle.

If your key is lost, consult your Authorized Mazda Dealer with the code number ready.

Keys

Keys and Children: Leaving children in a vehicle with the ignition key is dangerous. This could result in someone being badly injured or even killed. They could play with power windows or other controls, or even make the vehicle move. Dont leave the keys in your vehicle with children.

To avoid damage to the key, do not:

Drop the key. Get the key wet. Expose the key to any kind of

magnetic field. Expose the key to high

temperatures on places such as the dashboard or hood, under direct sunlight.

When starting the engine, do not let the following materials touch the key grip. The engine may not start:

Spare keys. Keys for other vehicles equipped

with an immobilizer system. Metal objects that touch or pass

through the hole in the key. Devices for electronic purchases,

and security passage.

WARNING

CAUTION Lock Operates Primary key

Secondary key

Ignition switch and steering column lock

Yes Yes

Doors Yes Yes Glove box Yes No Trunk lid Yes No

Key code number plate

Secondary key (Gray)

Primary key (Black)

J56J_8R29_EA_02I_Edition4.book Page 2 Monday, April 21, 2003 3:44 PM

3-3

Knowing Your Mazda

Doors and Locks

Form No. 8R29-EA-02I

This system locks and unlocks the doors and opens the trunk. It can also help you signal for attention in an emergency. Press the button slowly and accurately.

Keyless Entry System

To avoid damage to the transmitter, do not:

Drop it.

Get it wet.

Disassemble it.

Expose it to heat or sunlight.

CAUTION

NOTE

The keyless entry system is designed to operate up to about 2.5 m (8 ft) from the center of the vehicle, but this may vary because of local conditions.

The system doesnt operate when the ignition switch is in the ON position.

If the transmitter does not operate when pressing a button or the operation range becomes too small, the battery may be dead. To install a new battery, refer to Maintenance (page 3-5).

Additional transmitters can be obtained at an Authorized Mazda Dealer. Up to 3 transmitters can be used with the keyless entry system per vehicle. Bring all transmitters to an Authorized Mazda Dealer when the electronic codes need to be reset.

J56J_8R29_EA_02I_Edition4.book Page 3 Monday, April 21, 2003 3:44 PM

3-4

Knowing Your Mazda

Doors and Locks

Form No. 8R29-EA-02I

Transmitter Lock button

To lock the doors, press the LOCK button and the hazard warning lights will flash once.

To confirm that all the doors have been locked, press the LOCK button again within 5 seconds. If they are closed and locked, the horn will sound and the hazard warning lights will flash once.

Unlock button

To unlock the drivers door, press the UNLOCK button and the hazard warning lights will flash twice.

To unlock all the doors, press the UNLOCK button again within 5 seconds and the hazard warning lights will flash twice.

Trunk button

To open the trunk, press the button.

Panic button

You can use the button to turn on the alarm, which allows you to signal for attention in an emergency.

NOTE

This device complies with part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. (Outside transmissions may momentarily interfere with the devices operation.)

NOTE

If the LOCK and UNLOCK button are pressed sequentially, the hazard warning lights may not flash correctly.

Panic button Lock button

Trunk button

Unlock button

NOTE

Confirm that all the doors are locked visually or aurally by use of the double click.

NOTE

After unlocking with the transmitter, all doors will automatically lock if one of the doors is not opened within about 30 seconds.

J56J_8R29_EA_02I_Edition4.book Page 4 Monday, April 21, 2003 3:44 PM

3-5

Knowing Your Mazda

Doors and Locks

Form No. 8R29-EA-02I

Turning on the alarm

Pressing the button once will trigger the alarm for about 2 minutes and 30 seconds, and do the following:

The horn sounds intermittently.

The hazard warning lights flash.

Turning off the alarm

Press any button on the transmitter.

Transmitter Maintenance NOTE

The alarm will work whether any door is open or closed.

Make sure the battery is installed with the correct pole facing upward. Battery leakage could occur if it is not installed correctly.

When replacing the battery, be careful not to bend the electrical terminals or get oil on them. Also be careful not to get dirt in the transmitter as it could damage it.

Danger of battery explosion if it is incorrectly replaced.

Replace only with the same type battery (CR2025 or the equivalent).

Dispose of used batteries according to the following instructions.

Insulate the plus and minus terminals of the battery using cellophane or equivalent tape.

Never disassemble. Never throw the battery into fire

and/or water. Never deform or crush.

CAUTION

J56J_8R29_EA_02I_Edition4.book Page 5 Monday, April 21, 2003 3:44 PM

3-6

Knowing Your Mazda

Doors and Locks

Form No. 8R29-EA-02I

Replacing the transmitter battery

1. Insert a small screwdriver into the slot and gently pry open the transmitter.

2. Press the portion of the battery indicated by A and remove the battery.

3. Install a new battery (CR2025 or the equivalent) into the front portion of the holder with the positive pole ( ) facing up. Press on the B portion of the battery to set the battery.

4. Align the front and back covers and snap the transmitter shut.

Slot

Back cover

A

Do not press any buttons when replacing the battery. The electronic code could be altered and cause the keyless entry system to malfunction. If the keyless entry system fails to operate, contact an Authorized Mazda Dealer.

B

Back cover

Front cover

Front of holder

CAUTION

J56J_8R29_EA_02I_Edition4.book Page 6 Monday, April 21, 2003 3:44 PM

3-7

Knowing Your Mazda

Doors and Locks

Form No. 8R29-EA-02I

Service

If you have a problem with the keyless entry system, consult an Authorized Mazda Dealer.

If your transmitter is lost or stolen, bring all remaining transmitters to an Authorized Mazda Dealer as soon as possible for a replacement and to make the lost or stolen transmitter inoperative.

Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment.

CAUTION

Door Locks

Unattended Children and Pets: Leaving a child or an animal unattended in a parked vehicle is dangerous. In hot weather, temperatures inside a vehicle can become high enough to cause brain damage or even death. Always take all children and animals with you or leave a responsible person with them.

Keys and Children: Leaving children in a vehicle with the ignition key is dangerous. This could result in someone being badly injured or even killed. They could play with power windows or other controls, or even make the vehicle move. Dont leave the keys in your vehicle with children.

Unlocked Doors: Unlocked doors in a moving vehicle are dangerous. Passengers can fall out if a door is accidentally opened and can more easily be thrown out in an accident. So keep all doors locked when driving.

NOTE

Always remove the key from the ignition switch, close all windows, and lock all doors when leaving your vehicle unattended. This discourages intruders and thieves.

WARNING

J56J_8R29_EA_02I_Edition4.book Page 7 Monday, April 21, 2003 3:44 PM

3-8

Knowing Your Mazda

Doors and Locks

Form No. 8R29-EA-02I

Locking, Unlocking with Key

The drivers door can be locked/unlocked with the key. Turn the key toward the front to unlock, toward the back to lock.

Locking, Unlocking with Transmitter

The doors can be locked/unlocked by operating the keyless entry system transmitter, refer to keyless entry system (page 3-3).

Locking, Unlocking with Door- Lock Button

To lock any door from the inside, push its door-lock button. To unlock, pull it out. This does not operate the other door lock.

To lock any door with the door-lock button from the outside, push its door- lock button and close the door. This does not operate the other door lock.

Unlock

Lock

Unlock

Lock

NOTE

Lockout prevention keeps you from locking the drivers door with the key in the ignition switch at ACC or LOCK. If you try to lock the drivers door when the key is in the ignition switch and any door is open, the door lock immediately unlocks.

When locking the doors this way, be careful not to leave the key inside the vehicle.

Door-lock button

J56J_8R29_EA_02I_Edition4.book Page 8 Monday, April 21, 2003 3:44 PM

3-9

Knowing Your Mazda

Doors and Locks

Form No. 8R29-EA-02I

Power Door Locks

Locking, unlocking with key

All doors lock automatically when the drivers door is locked with the key. All doors unlock when the drivers door is unlocked and the key is held in the unlock position a second longer.

Locking, unlocking with door-lock switch

All doors lock automatically when LOCK is pushed. They all unlock when the unmarked part of the door-lock switch is pushed.

Rear Door Child Safety Locks

These locks are intended to help prevent children from accidentally opening the rear doors. Use them both whenever a child rides in the vehicle.

If you slide the child safety lock to the lock position before closing that door, the door cannot be opened from the inside. The door can be opened only by lifting the outside handle.

NOTE

Holding the key in the unlocked position in the drivers door lock for about a second unlocks all doors. To unlock only the drivers door, insert the key into the drivers door lock and turn the key briefly to the unlock position and then immediately return it to the center position.

Unlock

Lock

Unlock

Lock

Lock

Unlock

J56J_8R29_EA_02I_Edition4.book Page 9 Monday, April 21, 2003 3:44 PM

3-10

Knowing Your Mazda

Doors and Locks

Form No. 8R29-EA-02I

Opening and Closing the TrunkTrunk Lid

Open Trunk and Exhaust Gas: Exhaust gas in the cabin of a vehicle is dangerous. This gas contains CO (carbon monoxide), which is colorless, odorless, and highly poisonous. If inhaled, it can cause loss of consciousness and death. Because exhaust gas can get into the cabin through an open trunk, keep the trunk closed when driving.

WARNING Open Trunk Lid and Children: Leaving the trunk lid open or leaving children in the vehicle with the keys is dangerous. Children could open the trunk lid and climb inside resulting in possible injury or death from heat exposure. Close the trunk lid, lock the rear seatbacks and do not allow children to play inside the vehicle.

Unattended Children and Pets: Leaving children or animals unattended in a parked vehicle is dangerous. Babies left sleeping and kids who lock themselves in cars or trunks can die very quickly from heat prostration. Dont leave your children or pets alone in a car at any time. Dont leave the car, the rear folding seats or the trunk unlocked. Always keep the car from being a tempting place to play by locking rear seats, doors and the trunk, and keeping the keys where children wont play with them.

For vehicles equipped with a rear spoiler, do not lift the trunk lid by the spoiler. Lifting up the trunk lid by the rear spoiler could cause damage to the rear spoiler and the trunk lid.

WARNING

CAUTION

J56J_8R29_EA_02I_Edition4.book Page 10 Monday, April 21, 2003 3:44 PM

3-11

Knowing Your Mazda

Doors and Locks

Form No. 8R29-EA-02I

Opening the trunk lid with the key

Insert the primary key into the slot and turn it clockwise. The secondary key will not operate this lock (page 3-2).

Opening the trunk lid with the transmitter

The trunk lid can be opened by operating the keyless entry system transmitter, refer to Keyless Entry System (page 3-3).

Opening the trunk lid with the remote release button

Push the release button.

Closing the trunk lid

Use both hands to push the trunk lid down until the lock snaps shut. Do not slam it. Pull up on the trunk lid to make sure it is secure.

Remote Trunk Lid Release Lock- Out

As an added security feature, the remote release may be canceled to prevent anyone from opening the trunk without the primary key.

With the switch in the OFF position, the remote trunk lid release cannot be operated.

With the switch in the ON position, the remote trunk lid release can be operated.

Open

OFF position

ON position

J56J_8R29_EA_02I_Edition4.book Page 11 Monday, April 21, 2003 3:44 PM

3-12

Knowing Your Mazda

Doors and Locks

Form No. 8R29-EA-02I

Trunk Light

The trunk light is on when the lid is open and off when its closed. Your vehicle is equipped with a trunk

release slide lever that provides a means of escape for children and adults in the event they become locked inside the trunk.

No matter how careful adults might be with keys and locking their cars, parents should be aware that children may be tempted to play around vehicles and use the trunk as a hiding place.

Adults are advised to familiarize themselves with the operation and location of the trunk release slide lever so that all children can be told about it in an appropriate way, keeping in mind that most vehicles dont have such levers.

NOTE

To prevent the battery from being discharged, do not leave the trunk open for a long period when the engine is not running.

Trunk Release Slide Lever

J56J_8R29_EA_02I_Edition4.book Page 12 Monday, April 21, 2003 3:44 PM

3-13

Knowing Your Mazda

Doors and Locks

Form No. 8R29-EA-02I

Opening the Trunk Lid from the Inside

Slide the illuminated trunk release slide lever in the direction of the arrow. The lever is made of material that will glow for hours in the darkness of the trunk following a brief exposure to ambient light.

The trunk release slide lever is located on the inside of the trunk lid.

Open Trunk Lid and Children: Leaving the trunk lid open or leaving children in the vehicle with the keys is dangerous. Children could open the trunk lid and climb inside resulting in possible injury or death from heat exposure. Close the trunk lid, lock the rear seatbacks and do not allow children to play inside the vehicle.

Unattended Children and Pets: Leaving children or animals unattended in a parked vehicle is dangerous. Babies left sleeping and kids who lock themselves in cars or trunks can die very quickly from heat prostration. Dont leave your children or pets alone in a car at any time. Dont leave the car, the rear folding seats or the trunk unlocked. Always keep the car from being a tempting place to play by locking rear seats, doors and the trunk, and keeping the keys where children wont play with them.

WARNING

J56J_8R29_EA_02I_Edition4.book Page 13 Monday, April 21, 2003 3:44 PM

3-14

Knowing Your Mazda

Doors and Locks

Form No. 8R29-EA-02I

The ignition switch must be in the ON position for the power windows to operate.

Operating the Drivers Side Power Window

To open the window to the desired position, lightly hold down the switch. To close the window to the desired position, lightly pull up the switch.

Auto-opening

To fully open the window automatically, push the switch completely down.

To stop the window partway, lightly pull up the switch and then release it.

Engine-off power window operation

The power window can be operated about 40 seconds after the ignition switch is turned from the ON position to the ACC, LOCK position or key out of ignition with all doors closed. If any front door is opened, the power window will be inoperable.

Power Windows

Closing Power Windows: Closing power windows are dangerous. A persons hands, head, or even neck could be caught by the window and result in serious injury or even death. This warning applies especially to children. Make sure the opening is clear before closing a window.

Children and Power Windows: Leaving the power window switches unlocked while children are in the vehicle is dangerous. Power window switches that are not locked with the power window lock switch would allow children to operate power windows unintentionally which could result in serious injury if a childs hands, head or neck becomes caught by the window. Always lock all passenger power windows with the power window lock switch on the drivers side while children are in the vehicle, and never allow children to play with power window switches.

To prevent burning out the fuse and damaging the power window system, dont open or close more than two windows at once.

WARNING

CAUTION

Close

Open

Left front window

J56J_8R29_EA_02I_Edition4.book Page 14 Monday, April 21, 2003 3:44 PM

3-15

Knowing Your Mazda

Doors and Locks

Form No. 8R29-EA-02I

Operating the Passenger Power Windows

The power windows may be operated when the power window lock switch on the drivers door is in the unlocked position.

The passenger windows may be opened or closed by the power window master control switches on the drivers door.

To open the window to the desired position, hold down the switch. To close the window to the desired position, pull up the switch.

Engine-off power window operation

The power window can be operated about 40 seconds after the ignition switch is turned from the ON position to the ACC, LOCK position or key out of ignition with all doors closed. If any front door is opened, the power window will be inoperable.

Power Window Lock Switch

With the lock switch in the unlocked position, all power windows on each door can be operated.

With the lock switch in the locked position, only the drivers side power window can be operated.

Right front window

Left rear window

Right rear window

Close

Open

Unintentional Window Operation: Unintentional window operation is dangerous. A persons hands, head, or neck could be caught by the window and result in serious injury. Unless a passenger needs to operate a window, keep the power window lock switch in the locked position.

Unlocked position

Locked position

WARNING

J56J_8R29_EA_02I_Edition4.book Page 15 Monday, April 21, 2003 3:44 PM

3-16

Knowing Your Mazda

Doors and Locks

Form No. 8R29-EA-02I

Fuel-Filler Lid

To open, pull up the remote fuel-filler lid release.

Fuel-Filler Cap

To remove the filler cap, turn it counterclockwise.

To close the filler cap, turn it clockwise until it clicks.

Fuel-Filler Lid and Cap

Fuel Spray: Fuel spray is dangerous. Fuel can burn skin and eyes and cause illness when ingested. Fuel spray is released when there is pressure in the fuel tank and the fuel cap is removed too quickly. When removing the fuel cap, loosen the cap slightly and wait for any hissing to stop. Then remove it.

Fuel Vapor: Fuel vapor is dangerous. It could be ignited by sparks or flames causing serious burns and injuries. Before refueling, stop the engine, and always keep sparks and flames away from the filler neck.

Always use only a genuine Mazda fuel cap or an approved equivalent, available at Authorized Mazda Dealers. The wrong cap can result in a serious malfunction of the fuel and emission control systems. It may also cause the check engine light in the instrument cluster to illuminate.

WARNING

CAUTION

Remote fuel-filler lid release

Open

Close

J56J_8R29_EA_02I_Edition4.book Page 16 Monday, April 21, 2003 3:44 PM

3-17

Knowing Your Mazda

Doors and Locks

Form No. 8R29-EA-02I

Opening the Hood

1. With the vehicle parked, pull the release handle to unlock the hood.

2. Slide the safety catch to the right and lift the hood.

Make sure the fuel-filler cap is tightened securely. The check engine light comes on when the cap isnt tightened securely. If the light remains on (even after you have tightened the cap securely, driven, and restarted the engine several times), it may indicate a different problem. Contact an Authorized Mazda Dealer as soon as possible.

CAUTION Hood

J56J_8R29_EA_02I_Edition4.book Page 17 Monday, April 21, 2003 3:44 PM

3-18

Knowing Your Mazda

Doors and Locks

Form No. 8R29-EA-02I

3. Use the support rod to hold the hood open.

Closing the Hood

1. Check under the hood area to make certain all filler caps are in place and all loose items (e.g. tools, oil containers, etc.) have been removed.

2. Secure the rod in its clip, while holding up the hood.

3. Close the hood so that it locks securely.

The sunroof can be opened or closed electrically only when the ignition switch is in the ON position.

Support rod Clip

Sunroof

Extending the Head or Arms Through the Sunroof: Extending the head, arms, or other parts of the body through the sunroof is dangerous. The head or arms could hit something while the vehicle is moving. This could cause death or serious injury. Dont let passengers stand up or extend anything through the open sunroof while the vehicle is moving.

Closing the Sunroof: A closing sunroof is dangerous. The hands, head, or even neck of a person especially a child could be caught in it as it closes, causing serious injury or even death. Make sure the opening is clear before closing the sunroof.

Slide switch

Tilt switch

WARNING

J56J_8R29_EA_02I_Edition4.book Page 18 Monday, April 21, 2003 3:44 PM

3-19

Knowing Your Mazda

Doors and Locks

Form No. 8R29-EA-02I

Tilt Operation

The rear of the sunroof can be tilted open to provide more ventilation.

To tilt, push the rear of the tilt switch.

To close, push the front of the tilt switch.

Slide Operation

To open to any position, press the rear of the slide switch.

To close, press the front of the slide switch.

Sunshade

The sunshade can be opened and closed by hand.

The sunshade opens automatically when the sunroof is opened, but must be closed by hand.

NOTE

After washing your Mazda or after a rain, wipe the water off the sunroof before operating it.

Close

Tilt up

Open

Close

The sunshade doesnt tilt. To avoid damaging the sunshade, dont push up on it.

Sunshade

CAUTION

J56J_8R29_EA_02I_Edition4.book Page 19 Monday, April 21, 2003 3:44 PM

3-20

Knowing Your Mazda

Form No. 8R29-EA-02I

Security System

The immobilizer system allows the engine to start only with a key the system recognizes.

If someone attempts to start the engine with an unrecognized key, the engine will not start, thereby helping to prevent the theft of your vehicle.

Operation

Arming

The system is armed when the ignition switch is turned from the ON to the ACC position. The security indicator light in the instrument panel flashes every 2 seconds until the system is disarmed.

Disarming

The system is disarmed when the ignition switch is turned to the ON position with the correct ignition key. The security indicator light illuminates for about 3 seconds and goes out.

If the engine doesnt start with the correct ignition key, and the security indicator light keeps illuminating or flashing, the system may have a malfunction. Consult an Authorized Mazda Dealer.

Immobilizer System

Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment.

NOTE

This device complies with part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. (Outside transmissions may momentarily interfere with the devices operation.)

CAUTION

J56J_8R29_EA_02I_Edition4.book Page 20 Monday, April 21, 2003 3:44 PM

3-21

Knowing Your Mazda

Security System

Form No. 8R29-EA-02I

Maintenance

If you have a problem with the immobilizer system or the key, consult an Authorized Mazda Dealer.

NOTE

If the warning light comes on and stays on when the ignition switch is turned to the ON position, the engine will not start.

Signals from a TV or radio station, or from a transceiver or a mobile telephone, could interfere with your immobilizer system. If you are using the proper key and your engine fails to start, check the warning light. If it is flashing, remove the ignition key and wait 2 seconds or more, then reinsert it and try starting the engine again. If it doesnt start after 3 or more tries, contact an Authorized Mazda Dealer.

If the warning light flashes continuously while you are driving, dont shut off the engine. Go to an Authorized Mazda Dealer and have it checked. If you shut off the engine while the light is flashing you wont be able to restart it.

To avoid damage to the key, do not:

Drop the key. Get the key wet. Expose the key to any kind of

magnetic field. Expose the key to high

temperatures on places such as the dashboard or hood, under direct sunlight.

When starting the engine, do not let the following materials touch the key grip. The engine may not start:

Spare keys. Keys for other vehicles equipped

with an immobilizer system. Metal objects that touch or pass

through the hole in the key. Devices for electronic purchases,

and security passage.

CAUTION

J56J_8R29_EA_02I_Edition4.book Page 21 Monday, April 21, 2003 3:44 PM

3-22

Knowing Your Mazda

Security System

Form No. 8R29-EA-02I

Modification and Add-On Equipment

Mazda cannot guarantee the systems operation if the system has been modified or if any add-on equipment has been installed to it.

The optional theft-deterrent system is designed to prevent your vehicle or its contents from being stolen when all the doors, hood, and trunk lid are locked.

If forcible entry is attempted, the system sounds the horn and flashes the hazard warning lights.

The system wont function unless its properly armed. So when you leave the vehicle, lock all the doors, close all the windows, take your key, your transmitter.

Operation

What turns it on:

Forcing open a door, the hood or the trunk lid.

Opening a door , the hood or the trunk lid by operating an inside door-lock button , the hood release handle or the trunk lid release button.

What it does:

The horn sounds intermittently and the hazard warning lights flash.

The alarm continues for about 3 minutes, then stops.

If the system is triggered again, the lights and horn will activate until a door is unlocked or the trunk lid is opened with the key or with the transmitter.

NOTE

The keys carry a unique electronic code. For this reason, and to assure your safety, replacement keys require some waiting time to obtain. They are only available through an Authorized Mazda Dealer.

Always keep a replacement key, in case one is lost. If a key is lost, contact an Authorized Mazda Dealer as soon as possible.

If you lose a key, an Authorized Mazda Dealer will reset the electronic codes of your remaining keys and immobilizer system. Starting the vehicle with a key that has not been reset is not possible.

To avoid damage to your vehicle, do not modify the system or install any add-on equipment to it.

CAUTION

Theft-Deterrent System

NOTE

The theft-deterrent system operates without the keyless entry system transmitter, as well.

J56J_8R29_EA_02I_Edition4.book Page 22 Monday, April 21, 2003 3:44 PM

3-23

Knowing Your Mazda

Security System

Form No. 8R29-EA-02I

How to Arm the System

1. Remove the key from the ignition switch.

2. Close the hood and the trunk lid. Then close all doors and lock them from the outside using the key in the door. If you have the keyless entry system, press the LOCK button on the transmitter. The hazard warning lights will flash once to indicate that the system is armed.

The following method will also arm the theft-deterrent system: Close the hood and the trunk lid. Press the area on the door-lock switch marked "DOOR LOCK" once. Close all doors.

To Turn off an Armed System

An armed system can be turned off by any one of the following methods:

Unlock a door with the key.

Press the UNLOCK button on the keyless entry system transmitter.

Insert the key into the ignition switch and turn it to the ON position.

The hazard warning lights will flash twice to indicate that the system is turned off.

To Stop an Alarm

A triggered alarm can be turned off by any one of the following methods:

Unlock a door with the key.

Open the trunk lid with the key.

Press the UNLOCK button or button on the keyless entry system transmitter.

NOTE

Locking the doors with the inside door-lock button will not arm the system.

NOTE

The trunk lid can be opened with the key or the transmitter even when the system is armed. The alarm will not come on and the system will remain armed.

NOTE

If you have any problem with the theft- deterrent system, consult an Authorized Mazda Dealer.

J56J_8R29_EA_02I_Edition4.book Page 23 Monday, April 21, 2003 3:44 PM

3-24

Knowing Your Mazda

Security System

Form No. 8R29-EA-02I

Theft-Deterrent Labels

Labels indicating that your vehicle is equipped with a Theft-Deterrent System are in the glove box.

Mazda recommends that you affix them to the lower rear corner of the front door windows.

J56J_8R29_EA_02I_Edition4.book Page 24 Monday, April 21, 2003 3:44 PM

3-25

Knowing Your Mazda

Form No. 8R29-EA-02I

Steering Wheel and Mirrors

Steering Wheel Adjustment

To change the angle or length of the steering wheel:

1. Stop the vehicle, pull down the lock release lever under the steering column.

2. Tilt the steering wheel and/or adjust the steering column length to the desired positions, push the lever up to lock the column.

3. Push the wheel up and down to be certain its locked before driving.

Outside Mirrors

Check the mirrors angles before driving.

Power control mirror

The ignition switch must be in the ACC or ON position.

To adjust:

1. Press the left or right side of the selector switch to choose the mirror.

2. Depress the perimeter switch in the appropriate direction.

Steering Wheel

Adjusting the Steering Wheel: Adjusting the steering wheel while the vehicle is moving is dangerous. Moving it can very easily cause the driver to abruptly turn to the left or right. This can lead to loss of control or an accident. Never adjust the steering wheel while the vehicle is moving.

WARNING

Lock release lever

Mirrors

Convex Mirror (Passenger Side): Changing lanes without taking into account the actual distance of the vehicle in the convex mirror is dangerous. You could have a serious accident. What you see in the convex mirror is closer than it appears. Be sure to look over your shoulder or to check your inside mirror before changing lanes.

WARNING

Perimeter switch

Selector switch

Outside mirror

J56J_8R29_EA_02I_Edition4.book Page 25 Monday, April 21, 2003 3:44 PM

3-26

Knowing Your Mazda

Steering Wheel and Mirrors

Form No. 8R29-EA-02I

After adjusting the mirror, lock the control by placing the selector switch in the middle position.

Mirror defroster

If your vehicle has mirror defrosters, turn them on by turning the ignition on and pushing the rear window defroster switch (page 5-41).

Rearview Mirror

Rearview mirror adjustment

Before driving, adjust the rearview mirror to center on the scene through the rear window.

Reducing glare from headlights

Manual day/night mirror

Push the day/night lever forward for day driving. Pull it back to reduce glare of headlights from cars at the rear.

Auto-dimming mirror

The auto-dimming mirror automatically reduces glare of headlights from cars at the rear when the ignition is in the ON position.

Press the OFF button ( ) to cancel the automatic dimming function. The indicator light will go off. To reactivate the automatic dimming function, press the ON button ( ). The indicator light will illuminate.

Blocked View: Cargo stacked higher than the seatbacks is dangerous. It can block your view in the rearview mirror, which might cause you to hit another car when changing lanes. Dont stack things higher than the seatbacks.

NOTE

For the manual day/night mirror, perform the adjustment with the day/ night lever in the day position.

WARNING

Day/Night lever

Day

Night

OFF button

ON button

Indicator light

J56J_8R29_EA_02I_Edition4.book Page 26 Monday, April 21, 2003 3:44 PM

3-27

Knowing Your Mazda

Steering Wheel and Mirrors

Form No. 8R29-EA-02I

NOTE

Do not use glass cleaner or suspend objects on or around the light sensor. Otherwise, light sensor sensitivity will be affected and may not operate normally.

For information regarding the 3 buttons ( , , ) on the auto- dimming mirror, refer to HomeLink Wireless Control System (page 5- 43).

Light sensor

Light sensor

J56J_8R29_EA_02I_Edition4.book Page 27 Monday, April 21, 2003 3:44 PM

3-28

Form No. 8R29-EA-02I

J56J_8R29_EA_02I_Edition4.book Page 28 Monday, April 21, 2003 3:44 PM

4-1

Form No. 8R29-EA-02I

4 Before Driving Your Mazda

Important information about driving your Mazda.

Fuel and Engine Exhaust Precautions ......................................... 4-2 Fuel Requirements ..................................................................... 4-2 Emission Control System .......................................................... 4-3 Engine Exhaust (Carbon Monoxide) ......................................... 4-4

Before Starting the Engine ........................................................... 4-5 Before Getting In ....................................................................... 4-5 After Getting In ......................................................................... 4-5

Driving Tips ................................................................................... 4-6 Break-In Period ......................................................................... 4-6 Money-Saving Suggestions ....................................................... 4-6 Hazardous Driving ..................................................................... 4-7 Rocking the Vehicle ................................................................... 4-7 Winter Driving ........................................................................... 4-8 Driving In Flooded Area ........................................................... 4-9 Overloading ............................................................................... 4-9

Towing .......................................................................................... 4-10 Trailer Towing ......................................................................... 4-10

J56J_8R29_EA_02I_Edition4.book Page 1 Monday, April 21, 2003 3:44 PM

4-2

Before Driving Your Mazda

Form No. 8R29-EA-02I

Fuel and Engine Exhaust Precautions

Vehicles with catalytic converters or oxygen sensors must use ONLY UNLEADED FUEL, which will reduce exhaust emissions and keep spark plug fouling to a minimum.

Fuel with a lower rating could cause the emission control system to lose effectiveness. It could also cause engine knocking and serious engine damage.

Your Mazda will perform best with fuel listed in the table.

*U.S. federal law requires that octane ratings be posted on gasoline station pumps.

Gasoline blended with oxygenates such as alcohol or ether compounds are generally referred to as oxygenated fuels. The common gasoline blend that can be used with your vehicle is ethanol blended at no more than 10%. Gasoline containing alcohol, such as ethanol or methanol, may be marketed under the name "Gasohol".

Vehicle damage and drivability problems resulting from the use of the following may not be covered by the Mazda warranty.

Gasohol containing more than 10% ethanol.

Gasoline or gasohol containing methanol.

Leaded fuel or leaded gasohol.

Fuel Requirements

Fuel Octane Rating* (Anti-knock index) Regular unleaded fuel 87 [ (R+M)/2 method] or above (91 RON or above)

USE ONLY UNLEADED FUEL. Leaded fuel is harmful to the catalytic converter or the oxygen sensor. The lead will accumulate on the oxygen sensor and the catalyst inside the converter. This will result in a malfunction of the emission control system, causing poor performance.

Your vehicle can only use oxygenated fuels containing no more than 10% ethanol by volume. Damage to your vehicle may occur when ethanol exceeds this recommendation, or if the gasoline contains any methanol. Stop using gasohol of any kind if your vehicle engine is performing poorly.

Never add fuel system additives. Never add cleaning agents other than those specified by Mazda. Other cleaning agents and additives may damage the system. Consult an Authorized Mazda Dealer.

CAUTION

J56J_8R29_EA_02I_Edition4.book Page 2 Monday, April 21, 2003 3:44 PM

4-3

Before Driving Your Mazda

Fuel and Engine Exhaust Precautions

Form No. 8R29-EA-02I

Your vehicle is equipped with an emission control system (the catalytic converter is part of this system) that enables your vehicle to comply with existing exhaust emissions requirements.

Emission Control System

Parking Over Things That Burn: Parking over or near anything inflammable, such as dry grass, is dangerous. Even with the engine turned off, the exhaust system could ignite it because the exhaust system gets very hot during normal use. A resulting fire could cause serious injury or death. Never park over or near anything inflammable.

Ignoring the following precautions could cause lead to accumulate on the catalyst inside the converter or cause the converter to get very hot. Either condition will damage the converter and cause poor performance.

USE ONLY UNLEADED FUEL.

Dont drive your Mazda with any sign of engine malfunction.

Dont coast with the ignition switch turned off.

Dont descend steep grades in gear with the ignition switch turned off.

Dont operate the engine at high idle for more than 5 minutes.

Dont tamper with the emission control system. All inspections and adjustments must be made by a qualified technician.

Dont try to push-start or pull-start your vehicle.

NOTE

Under U.S. federal law, any modification to the original-equipment emission control system before the first sale and registration of a vehicle is subject to penalties. In some states, such modification made on a used vehicle is also subject to penalties.

WARNING

CAUTION

J56J_8R29_EA_02I_Edition4.book Page 3 Monday, April 21, 2003 3:44 PM

4-4

Before Driving Your Mazda

Fuel and Engine Exhaust Precautions

Form No. 8R29-EA-02I

Engine Exhaust (Carbon Monoxide)

Carbon Monoxide: Engine exhaust gas is dangerous. This gas contains carbon monoxide (CO), which is colorless, odorless, and poisonous. When inhaled, it can cause loss of consciousness and death. If you smell exhaust gas inside your vehicle, keep all windows fully open and contact an Authorized Mazda Dealer immediately.

Exhaust Gas in Enclosed Area: Running the engine inside an enclosed area, such as a garage, is dangerous. Exhaust gas, which contains poisonous carbon monoxide, could easily enter the cabin. Loss of consciousness or even death could occur. Dont run the engine when inside an enclosed area.

Idling with the Windows Closed: Exhaust gas is dangerous. When your vehicle is stopped with the windows closed and the engine running for a long time in an open area, exhaust gas, which contains poisonous carbon monoxide, could enter the cabin. Loss of consciousness or even death could occur. Open the windows or adjust the heating or cooling system to draw fresh air.

Snow Blocking the Exhaust Gas: Running the engine when a vehicle is stopped in deep snow is dangerous. The exhaust pipe could be blocked by the snow, allowing exhaust gas to enter the cabin. Because exhaust gas contains poisonous carbon monoxide, anyone in the cabin could be injured or killed. Clear the snow from underneath and around your vehicle before starting the engine.

WARNING

J56J_8R29_EA_02I_Edition4.book Page 4 Monday, April 21, 2003 3:44 PM

4-5

Before Driving Your Mazda

Form No. 8R29-EA-02I

Before Starting the Engine

Be sure the windows, outside mirror(s), and outside lights are clean.

Inspect inflation pressures and condition of tires.

Look under the vehicle for any sign of a leak.

If you plan to back up, make sure nothing will be in your way.

Are all doors closed and locked?

Is the seat adjusted properly?

Are the inside and outside mirrors adjusted?

Is everyones seat belt fastened?

Do all the lights work?

Check all gauges.

Check all warning lights when the ignition switch is turned to the ON position.

Release the parking brake and make sure the brake warning light goes off.

Always be thoroughly familiar with your Mazda.

Before Getting In

NOTE

Engine oil, engine coolant, brake/ clutch fluid, washer fluid, and other fluid levels should be inspected daily, weekly, or at refueling, depending on the fluid. See Maintenance, Section 8.

After Getting In

J56J_8R29_EA_02I_Edition4.book Page 5 Monday, April 21, 2003 3:44 PM

4-6

Before Driving Your Mazda

Form No. 8R29-EA-02I

Driving Tips

No special break-in is necessary, but a few precautions in the first 1,000 km (600 miles) may add to the performance, economy, and life of your Mazda.

Dont race the engine.

Dont maintain one constant speed for long.

Dont drive constantly at full-throttle or high engine rpm for extended periods of time.

Avoid unnecessary hard stops.

Avoid full-throttle starts.

How you operate your Mazda determines how far it will travel on a tank of fuel. Use these suggestions to help save money on fuel and repairs.

Avoid long warm-ups. Once the engine runs smoothly, begin driving.

Avoid fast starts.

Keep the engine tuned. Follow the maintenance schedule (page 8-3) and have an Authorized Mazda Dealer perform inspections and servicing.

Use the air conditioner only when necessary.

Slow down on rough roads.

Keep the tires properly inflated.

Dont carry unnecessary weight.

Dont rest your foot on the brake pedal while driving.

Keep the wheels in correct alignment.

Keep windows closed at high speeds.

Slow down when driving in crosswinds and headwinds.

Break-In Period Money-Saving Suggestions

Coasting: Turning off the engine to coast down a hill is dangerous. This causes the loss of power steering and power brake control. Any loss of steering or braking control could cause an accident. Never turn off the engine and coast down a hill.

WARNING

J56J_8R29_EA_02I_Edition4.book Page 6 Monday, April 21, 2003 3:44 PM

4-7

Before Driving Your Mazda

Driving Tips

Form No. 8R29-EA-02I

When driving in water, mud, sand, or similar hazard:

Be cautious and allow extra distance for braking.

Avoid sudden braking and quick steering.

If your vehicle is not equipped with ABS, brake with the pedal by using a light up-down motion. Dont hold the pedal down constantly. If your vehicle is equipped with ABS, dont pump the brakes. Continue to press down on the brake pedal.

If you get stuck, shift to 1 or 2 and accelerate slowly. Dont spin the front wheels.

For more traction in starting, use sand, rock salt, chains, carpeting, or other nonslip material under the front wheels.

If you must rock the vehicle to free it from snow, sand, or mud, depress the accelerator slightly and slowly move the shift lever from 1 (D) to R.

Hazardous Driving

Downshifting on Slippery Surfaces: Downshifting into lower gear while driving on slippery surfaces is dangerous. The sudden change in tire speed could cause the tires to skid. This could lead to loss of vehicle control and an accident. If it is necessary to downshift on slippery surfaces, be very careful.

WARNING

Rocking the Vehicle

Spinning the Wheels: When the vehicle is stuck, spinning the wheels at high speed is dangerous. The spinning tire could overheat and explode. This could cause serious injuries. Dont spin the wheels at more than 56 km/h (35 mph), and dont allow anyone to stand behind a wheel when pushing the vehicle.

Too much rocking may cause engine overheating, transaxle failure, and tire damage.

WARNING

CAUTION

J56J_8R29_EA_02I_Edition4.book Page 7 Monday, April 21, 2003 3:44 PM

4-8

Before Driving Your Mazda

Driving Tips

Form No. 8R29-EA-02I

Carry emergency gear, including tire chains, window scraper, flares, a small shovel, jumper cables, and a small bag of sand or salt.

Ask a Mazda dealer to perform the following precautions:

Have the proper ratio of antifreeze in the radiator.

Inspect the battery and its cables. Cold reduces battery capacity.

Use only cold-weather engine oil (page 8-10).

Inspect the ignition system for damage and loose connections.

Use washer fluid made with antifreezebut dont use engine coolant antifreeze for washer fluid (page 8-19).

Dont use the parking brake in freezing weather as the parking brake may freeze. Instead, shift to P with an automatic transaxle and to 1 or R with a manual transaxle. Block the rear wheels.

Snow Tires

Use snow tires on all four wheels

Your vehicle is originally equipped with all season radials designed to be used all year around. In some extreme climates you may find it necessary to replace them with snow tires during the winter months to further improve traction on snow and ice covered roads. Dont go faster than 120 km/h (75 mph). Inflate snow tires 30 kPa (0.3 kgf/cm2, 4.3 psi) more than recommended on the tire pressure label (drivers door frame), but never more than the maximum cold-tire pressure shown on the tires.

Tire Chains

This vehicle cannot be operated with tire chains because it could cause interference with the vehicle body and scratching.

Winter Driving

Mixing Tire Types: Using tires different in size or type is dangerous. Your vehicles handling could be greatly affected and result in an accident. Use only the same size and type tires (snow, radial, or non- radial) on all four wheels.

WARNING

Check local regulations before using studded tires.

CAUTION

J56J_8R29_EA_02I_Edition4.book Page 8 Monday, April 21, 2003 3:44 PM

4-9

Before Driving Your Mazda

Driving Tips

Form No. 8R29-EA-02I

Driving In Flooded Area

Driving with Wet Brakes: Driving with wet brakes is dangerous. Increased stopping distance or the vehicle pulling to one side when braking could result in a serious accident. Light braking will indicate whether the brakes have been affected. Dry the brakes by driving very slowly and applying the brakes lightly until brake performance returns to normal.

Make sure water does not enter the vehicle interior or the engine area. The vehicle interior could become wet or the engine could be damaged.

WARNING

CAUTION

Overloading

Vehicle Load Weight: The gross axle weight rating (GAWR) and the gross vehicle weight rating (GVWR) of your vehicle are on the Motor Vehicle Safety Standard Label on the drivers door frame. Exceeding these ratings can cause an accident or vehicle damage. You can estimate the weight of your load by weighing the items (or people) before putting them in the vehicle. Be careful not to overload your vehicle.

WARNING

J56J_8R29_EA_02I_Edition4.book Page 9 Monday, April 21, 2003 3:44 PM

4-10

Before Driving Your Mazda

Form No. 8R29-EA-02I

Towing

Never tow a trailer with your Mazda.

Trailer Towing

J56J_8R29_EA_02I_Edition4.book Page 10 Monday, April 21, 2003 3:44 PM

5-1

Form No. 8R29-EA-02I

5 Driving Your Mazda

Explanation of instruments and controls.

Starting and Driving ..................................................................... 5-2 Ignition Switch .......................................................................... 5-2 Starting the Engine .................................................................... 5-3 Brake System ............................................................................. 5-4 Manual Transaxle Operation ..................................................... 5-9 Automatic Transaxle Controls ................................................. 5-10 Power Steering ......................................................................... 5-16 Cruise Control ......................................................................... 5-17 Traction Control System (TCS) ............................................... 5-20

Instrument Cluster and Indicators ............................................ 5-23 Meters and Gauges .................................................................. 5-23

Warning/Indicator Lights and Beeps ........................................ 5-27 Warning/Indicator Lights ......................................................... 5-27 Beeps ....................................................................................... 5-36

Switches and Controls ................................................................. 5-37 Lighting Control ...................................................................... 5-37 Turn and Lane-Change Signals ............................................... 5-38 Fog Lights ................................................................................ 5-39 Windshield Wipers and Washer ............................................... 5-39 Rear Window Defroster ........................................................... 5-41 Horn ......................................................................................... 5-42 Hazard Warning Flasher .......................................................... 5-42 HomeLink Wireless Control System ....................................... 5-43

J56J_8R29_EA_02I_Edition4.book Page 1 Monday, April 21, 2003 3:44 PM

5-2

Driving Your Mazda

Form No. 8R29-EA-02I

Starting and Driving

Ignition Switch Positions

LOCK

The steering wheel locks to protect against theft. Only in this position can the key be removed.

Manual transaxle

When turning the ignition switch to the LOCK position, push the key in at the ACC position.

Automatic transaxle

When turning the ignition switch to the LOCK position, keep the shift lever in P.

Ignition Switch

LOCK Push the key

ACC

ON

Removing the Key: Its dangerous to remove the key from the ignition switch while the vehicle is moving. Removing the key allows the steering wheel to lock. You will lose steering control and a serious accident could occur. Remove the key only when the vehicle is parked.

Not Setting the Parking Brake: Leaving the drivers seat without setting the parking brake is dangerous. Unexpected vehicle movement could occur if the parking brake is not set. This could cause an accident. Before leaving the drivers seat, always set the parking brake and make sure the shift lever is in P with an automatic transaxle or in 1 or R with a manual transaxle.

LOCK Shift lever engaged in P (park)

ACC

ON

WARNING

J56J_8R29_EA_02I_Edition4.book Page 2 Monday, April 21, 2003 3:44 PM

5-3

Driving Your Mazda

Starting and Driving

Form No. 8R29-EA-02I

ACC (Accessory)

The steering wheel unlocks and some electrical accessories will operate.

ON

This is the normal running position after the engine is started. The warning lights (except brakes) should be inspected before the engine is started (page 5-27).

START

The engine is started in this position. It will crank until you release the key; then it returns to the ON position. The brake warning light can be checked after the engine is started (page 5-27).

Ignition Key Reminder

If the ignition switch is in the LOCK or ACC position, a beep will sound when the drivers door is opened.

1. Occupants should fasten their seat belts.

2. Make sure the parking brake is on.

3. Depress the brake pedal.

4. (Manual transaxle) Depress the clutch pedal all the way and shift into neutral. Keep the pedal depressed while cranking the engine.

(Automatic transaxle) Put the vehicle in park (P). If you must restart the engine while the vehicle is moving, shift into neutral (N).

NOTE

If turning the key is difficult, jiggle the steering wheel from side to side.

NOTE

When the ignition switch is turned to the ON position, the sound of the fuel pump motor operating near the fuel tank can be heard. This does not indicate an abnormality.

Starting the Engine

NOTE

Engine-starting is controlled by the spark ignition system. This system meets all Canadian Interference-Causing Equipment Standard requirements regulating the impulse electrical field strength of radio noise.

NOTE

The starter will not operate if the clutch pedal is not pushed down all the way.

NOTE

The starter will not operate if the shift lever is not in P or N.

J56J_8R29_EA_02I_Edition4.book Page 3 Monday, April 21, 2003 3:44 PM

5-4

Driving Your Mazda

Starting and Driving

Form No. 8R29-EA-02I

5. Turn the ignition switch to the START position and hold (up to 10 seconds at a time) until the engine starts.

6. After starting the engine, let it idle for about 10 seconds.

Foot Brake

Your Mazda has power-assisted brakes that adjust automatically through normal use.

Should power-assist fail, you can stop by applying greater force than normal to the brake pedal. But the distance required to stop will be greater than usual.

Dont try the starter for more than 10 seconds at a time. If the engine stalls or fails to start, wait 10 seconds before trying again. Otherwise, you may damage the starter and drain the battery.

NOTE

In extremely cold weather, below -18C (0F), or after the vehicle has stood idle several days, let the engine warm up without operating the accelerator.

Whether cold or warm, the engine should be started without use of the accelerator.

CAUTION

Brake System

J56J_8R29_EA_02I_Edition4.book Page 4 Monday, April 21, 2003 3:44 PM

5-5

Driving Your Mazda

Starting and Driving

Form No. 8R29-EA-02I

Parking Brake

Setting the parking brake

Depress the brake pedal, then pull the brake handle fully upward.

Releasing the parking brake

Depress the brake pedal, then pull the handle up and press the button. Lower the handle to the release position while holding in the button.

Driving with the Engine Off: Continuing to drive when the engine is stalled or turned off is dangerous. Braking will require more effort, and the brakes power-assist could be depleted if you pump the brake. This will cause longer stopping distances or even an accident. Dont continue driving when the engine is stalled or turned off, find a safe place to stop.

Riding the Brakes: Driving with your foot continuously on the brake pedal or steadily applying the brakes for long distances is dangerous. This causes overheated brakes, resulting in longer stopping distances or even total brake failure. This could cause loss of vehicle control and a serious accident. Avoid continuous application of the brakes. Shift to a lower gear when going down steep hills.

Driving with Wet Brakes: Driving with wet brakes is dangerous. Increased stopping distance or the vehicle pulling to one side when braking could result in a serious accident. Light braking will indicate whether the brakes have been affected. Dry the brakes by driving very slowly and applying the brakes lightly until brake performance is normal.

WARNING

Driving with the parking brake on will cause excessive wear of the brake linings or pads.

CAUTION

J56J_8R29_EA_02I_Edition4.book Page 5 Monday, April 21, 2003 3:44 PM

5-6

Driving Your Mazda

Starting and Driving

Form No. 8R29-EA-02I

Brake System Warning Light

This warning has the following functions:

Parking brake warning

The light comes on when the parking brake is applied with the ignition switch in the START or ON position. It goes off when the parking brake is fully released.

Low brake fluid level warning/ Electronic brake force distribution system warning

If the light stays on after the parking brake is fully released, you may have a brake problem.

Drive to the side of the road and park off the right-of-way.

Low brake fluid level warning

You may notice that the pedal is harder to push or that it may go closer to the floor. In either case, it will take longer to stop the vehicle.

1. With the engine stopped, check the brake fluid level immediately and add fluid as required (page 8-15).

2. After adding fluid, check the light again.

If the warning light remains on, or if the brakes do not operate properly, do not drive the vehicle. Have it towed to an Authorized Mazda Dealer.

Even if the light goes off, have your brake system inspected as soon as possible.

Electronic brake force distribution system warning

If the electronic brake force distribution control unit determines that some components are operating incorrectly, the control unit may turn the brake system warning light on. In this case, the ABS warning light comes on at the same time (page 5-31).

J56J_8R29_EA_02I_Edition4.book Page 6 Monday, April 21, 2003 3:44 PM

5-7

Driving Your Mazda

Starting and Driving

Form No. 8R29-EA-02I

Anti-Lock Brake System (ABS)

The ABS control unit continuously monitors the speed of each wheel. If one is about to lock up, the ABS responds by automatically releasing and reapplying that wheels brake.

The driver will feel a slight vibration in the brake pedal and may hear a chattering noise from the brake system. This is normal when the ABS operates. Dont pump the brakes, continue to press down on the brake pedal.

Brake Warning Light: Driving with the brake system warning light on is dangerous. It indicates that your brakes may not work at all or that they could completely fail at any time. If this light remains on, after checking that the parking brake is released, have the brakes inspected immediately. Dont drive with this light on, and contact an Authorized Mazda Dealer to have the brakes inspected as soon as possible.

ABS Warning Light and Brake Warning Light on at the Same Time: Driving when the brake system warning light and ABS warning light are on at the same time is dangerous. When both lights are on, the rear wheels could lock more quickly in an emergency stop than under normal circumstances. Dont drive with both lights on, and contact an Authorized Mazda Dealer to have the brakes inspected as soon as possible.

WARNING

ABS: The ABS cannot compensate for unsafe and reckless driving, excessive speed, tailgating (following another vehicle too closely), and hydroplaning (reduced tire friction and road contact because of water on the road surface). You can still have an accident. So dont rely on ABS as a substitute for safe driving.

NOTE

Braking distances may be longer on loose surfaces (snow or gravel, for example) which usually have a hard foundation. A vehicle with a normal braking system may require less distance to stop under these conditions because the tires will build up a wedge of surface layer when the wheels skid.

WARNING

J56J_8R29_EA_02I_Edition4.book Page 7 Monday, April 21, 2003 3:44 PM

5-8

Driving Your Mazda

Starting and Driving

Form No. 8R29-EA-02I

ABS Warning Light

The warning light stays on for a few seconds when the ignition switch is turned to the ON position.

If the ABS warning light stays on while youre driving, the ABS control unit has detected a system malfunction. If this occurs, your brakes will function normally as if the vehicle had no ABS. Should this happen, consult an Authorized Mazda Dealer as soon as possible.

Brake Pad Wear Indicator

When the disc brake pads become worn, the built-in wear indicators contact the disc plates. This causes a screeching noise to warn that the pads should be replaced.

When you hear this noise, consult an Authorized Mazda Dealer as soon as possible.

ABS Warning Light and Brake Warning Light on at the Same Time: Driving when the brake system warning light and ABS warning light are on at the same time is dangerous. When both lights are on, the rear wheels could lock more quickly in an emergency stop than under normal circumstances. Dont drive with both lights on, and contact an Authorized Mazda Dealer to have the brakes inspected as soon as possible.

WARNING

NOTE

When the engine is jump-started to charge the battery, uneven rpm occurs and the ABS warning light comes on. This is due to a weak battery, not a malfunction. Recharge the battery.

Driving with Worn Disc Pads: Driving with worn disc pads is dangerous. The brakes could fail and cause a serious accident. As soon as you hear a screeching noise consult an Authorized Mazda Dealer.

WARNING

J56J_8R29_EA_02I_Edition4.book Page 8 Monday, April 21, 2003 3:44 PM

5-9

Driving Your Mazda

Starting and Driving

Form No. 8R29-EA-02I

Manual Transaxle Shift Pattern

The shift pattern of the transaxle is conventional, as shown.

Press the clutch pedal all the way down while shifting; then release it slowly.

A safety feature prevents accidental shifting from 5 to reverse. The shift lever must be put in neutral before being shifted to reverse.

Recommendations for Shifting

Upshifting

2.3-liter engine

For normal acceleration, we recommend these shift points.

For cruising

Manual Transaxle Operation

Sudden Engine-Braking: Shifting down while driving on wet, snowy, or frozen roads, or while driving at high speeds causes sudden engine braking, which is dangerous. The sudden change in tire speed could cause the tires to skid. This could lead to loss of vehicle control and an accident. Do not use sudden engine braking on slippery road surfaces or at high speeds.

Neutral position

WARNING

Keep your foot off the clutch pedal except when shifting gears. Also, dont use the clutch to hold the vehicle on an upgrade. This will avoid needless clutch wear and damage.

Make sure the vehicle comes to a complete stop before shifting to reverse. Shifting to reverse while the vehicle is still moving may damage the transaxle.

NOTE

If shifting to reverse is difficult, shift into neutral, release the clutch pedal, and try again.

1 to 2 26 km/h (16 mph) 2 to 3 45 km/h (28 mph) 3 to 4 53 km/h (33 mph) 4 to 5 63 km/h (39 mph)

1 to 2 13 km/h (8 mph) 2 to 3 32 km/h (20 mph) 3 to 4 50 km/h (31 mph) 4 to 5 68 km/h (42 mph)

CAUTION

J56J_8R29_EA_02I_Edition4.book Page 9 Monday, April 21, 2003 3:44 PM

5-10

Driving Your Mazda

Starting and Driving

Form No. 8R29-EA-02I

3.0-liter engine

For normal acceleration, we recommend these shift points.

For cruising

Downshifting

When you must slow down in heavy traffic or on a steep upgrade , downshift before the engine starts to overwork. This reduces the chance of stalling and gives better acceleration when you need more speed. On a steep downgrade, downshifting helps maintain safe speed and prolongs brake life.

Various Lockouts:

1 to 2 27 km/h (17 mph) 2 to 3 48 km/h (30 mph) 3 to 4 56 km/h (35 mph) 4 to 5 63 km/h (39 mph)

1 to 2 13 km/h (8 mph) 2 to 3 34 km/h (21 mph) 3 to 4 52 km/h (32 mph) 4 to 5 66 km/h (41 mph)

Automatic Transaxle Controls

Indicates that you must depress the brake pedal to shift (The ignition switch must be in the ACC or ON position). Indicates the shift lever can be shifted freely into any position.

J56J_8R29_EA_02I_Edition4.book Page 10 Monday, April 21, 2003 3:44 PM

5-11

Driving Your Mazda

Starting and Driving

Form No. 8R29-EA-02I

Transaxle Ranges

The shift lever must be in P or N to operate the starter.

P (Park)

P locks the transaxle and prevents the front wheels from rotating.

R (Reverse)

In position R, the vehicle moves only backward. You must be at a complete stop before shifting to or from R, except as explained under Rocking the Vehicle (page 4-7).

N (Neutral)

In N, the wheels and transaxle are not locked. The vehicle will roll freely even on the slightest incline unless the parking brake or brakes are on.

D (Drive)

D is the normal driving position. From a stop, the transaxle will automatically shift through a 4-gear/5-gear* sequence. *3.0-liter engine model

M (Manual)

M is the manual shift mode position. Gears can be shifted up or down by tapping the shift lever back or forward from this position.

Holding the Vehicle with P: Setting the shift lever to the P position without using the parking brake to hold the vehicle is dangerous. If P fails to hold, the vehicle could move and cause an accident. To hold the vehicle, set the shift lever to P AND set the parking brake.

Shifting into P, N or R while the vehicle is moving can damage your transaxle.

Shifting into a driving gear or reverse when the engine is running faster than idle can damage the transaxle.

WARNING

CAUTION

Shifting from N or P: Its dangerous to shift from N or P into a driving gear when the engine is running faster than idle. If this is done, the vehicle could move suddenly, causing an accident or serious injury. If the engine is running faster than idle, dont shift from N or P into a driving gear.

Shifting into N while Driving: Shifting into N while driving is dangerous. Engine braking cannot be applied when decelerating which could lead to an accident or serious injury. Do not shift into N when driving the vehicle.

WARNING

J56J_8R29_EA_02I_Edition4.book Page 11 Monday, April 21, 2003 3:44 PM

5-12

Driving Your Mazda

Starting and Driving

Form No. 8R29-EA-02I

Shift-Lock System

The shift-lock system prevents shifting out of P unless the brake pedal is depressed.

To shift from P:

1. Depress and hold the brake pedal.

2. Start the engine.

3. Move the shift lever.

Manual Shift Mode

This mode gives you the feel of driving a manual transaxle vehicle by tapping the shift lever forward and back while in this mode.

To change to manual shift mode, shift the lever from D to M.

To return to automatic shift mode, shift the lever from M to D.

Indicators

Shift position indicator

In manual shift mode, the "M" of the shift position indicator in the instrument panel illuminates.

Gear position indicator

In manual shift mode, the numeral for the selected gear illuminates below the shift position indicator.

NOTE

When the ignition switch is in the LOCK position, the transaxle cannot be shifted from P.

To be sure the vehicle is in park, the ignition key cannot be removed unless the shift lever is in P.

NOTE

If you change to manual shift mode when the vehicle is stopped, the gear will shift to M1.

If you tap the shift lever back when the vehicle is stopped and the gear is at M1, the gear will shift to M2. M2 is helpful for starting on slippery surfaces.

Shift position indicator

Gear position indicator

J56J_8R29_EA_02I_Edition4.book Page 12 Monday, April 21, 2003 3:44 PM

5-13

Driving Your Mazda

Starting and Driving

Form No. 8R29-EA-02I

Shifting

Shifting up

(M1M2M3M4M5*)

To shift up to a higher gear, tap the shift lever back ( ) once. *3.0-liter engine model

Shifting down

(M5*M4M3M2M1)

To shift down to a lower gear, tap the shift lever forward ( ) once. *3.0-liter engine model

NOTE

If the gears cannot be shifted down when driving at higher speeds, the gear position indicator will flash twice to signal that the gears cannot be shifted down (page 5-14).

NOTE

When driving slowly, the gears may not shift up depending on vehicle speed (page 5-14).

In manual shift mode, gears do not shift up automatically. Dont run the engine with the tachometer needle in the RED ZONE. If the tachometer needle enters the RED ZONE, you may feel engine- braking because the fuel delivery will be stopped to protect the engine. However, this does not indicate an abnormality.

Gears may not be shifted from M1 to M2 right after shifting the lever from D to M. Wait a few seconds and then shift up to M2.

When depressing the accelerator fully, the transaxle will shift to a lower gear, depending on vehicle speed.

J56J_8R29_EA_02I_Edition4.book Page 13 Monday, April 21, 2003 3:44 PM

5-14

Driving Your Mazda

Starting and Driving

Form No. 8R29-EA-02I

Shifting Specification

2.3-liter engine model

Shifting up

If the vehicle speed is lower than the speed specified for each gear, the gear cannot be shifted up to a higher gear.

At kickdown, shifting up to each gear is only possible at the following speeds or higher:

Shifting down

If the vehicle speed is higher than the speed specified for each gear, the gear cannot be shifted down to a lower gear.

During deceleration, the gears shift down automatically when speed is reduced to the following:

If the vehicle is kicked down at the following speeds or lower, the gears shift down automatically:

Sudden Engine-Braking: Shifting down while driving on wet, snowy, or frozen roads, or while driving at high speeds causes sudden engine braking, which is dangerous. The sudden change in tire speed could cause the tires to skid. This could lead to loss of vehicle control and an accident. Do not use sudden engine braking on slippery road surfaces or at high speeds.

NOTE

When driving at high speeds, the gear may not shift down depending on vehicle speed (page 5-14).

During deceleration, the gear may automatically shift down depending on vehicle speed (page 5-14).

When depressing the accelerator fully, the transaxle will shift to a lower gear, depending on vehicle speed.

WARNING

Gear Vehicle speed

M1M2 You can shift up to M2 whether the vehicle is stopped or moving.

M2M3 20 km/h (12 mph) M3M4 35 km/h (22 mph)

Gear Vehicle speed M2M3 61 km/h (37 mph) M3M4 154 km/h (95 mph)

Gear Vehicle speed M4M3 157 km/h (98 mph) M3M2 111 km/h (64 mph) M2M1 45 km/h (28 mph)

Gear Vehicle speed M4M3 31 km/h (19 mph) M3 or M2M1 8 km/h (5 mph)

Gear Vehicle speed M4M3 149 km/h (92 mph) M3M2 56 km/h (34 mph)

J56J_8R29_EA_02I_Edition4.book Page 14 Monday, April 21, 2003 3:44 PM

5-15

Driving Your Mazda

Starting and Driving

Form No. 8R29-EA-02I

3.0-liter engine model

Shifting up

If the vehicle speed is lower than the speed specified for each gear, the gear cannot be shifted up to a higher gear.

At kickdown, shifting up to each gear is only possible at the following speeds or higher:

Shifting down

If the vehicle speed is higher than the speed specified for each gear, the gear cannot be shifted down to a lower gear.

During deceleration, the gears shift down automatically when speed is reduced to the following:

If the vehicle is kicked down at the following speeds or lower, the gears shift down automatically:

Recommendations for Shifting

Upshifting

2.3-liter engine

For normal acceleration and cruising, we recommend these shift points.

3.0-liter engine

For normal acceleration and cruising, we recommend these shift points.

Gear Vehicle speed

M1M2 You can shift up to M2 whether the vehicle is stopped or moving.

M2M3 10 km/h (6 mph)

M3M4

Between 25 and 63 km/h (15 and 39 mph), depending on how much the accelerator pedal is depressed.

M4M5

Between 44 and 86 km/h (27 and 53 mph), depending on how much the accelerator pedal is depressed.

Gear Vehicle speed M2M3 45 km/h (27 mph) M3M4 69 km/h (42 mph) M4M5 177 km/h (109 mph)

Gear Vehicle speed M5M4 194 km/h (120 mph) M4M3 133 km/h (82 mph) M3M2 87 km/h (53 mph) M2M1 46 km/h (28 mph)

Gear Vehicle speed

M5M4

Between 44 and 86 km/h (27 and 53 mph), depending on how much the accelerator pedal is released.

M4M3

Between 25 and 63 km/h (15 and 39 mph), depending on how much the accelerator pedal is released.

M3 or M2M1 10 km/h (6 mph)

Gear Vehicle speed M5M4 177 km/h (109 mph) M5M3 69 km/h (42 mph) M4M3 69 km/h (42 mph) M4M2 45 km/h (27 mph) M3M2 45 km/h (27 mph)

M1 to M2 24 km/h (15 mph) M2 to M3 40 km/h (25 mph) M3 to M4 65 km/h (40 mph)

M1 to M2 24 km/h (15 mph) M2 to M3 40 km/h (25 mph) M3 to M4 65 km/h (40 mph) M4 to M5 73 km/h (45 mph)

J56J_8R29_EA_02I_Edition4.book Page 15 Monday, April 21, 2003 3:44 PM

5-16

Driving Your Mazda

Starting and Driving

Form No. 8R29-EA-02I

Downshifting

When you must slow down in heavy traffic or on a steep upgrade , downshift before the engine starts to overwork. This gives better acceleration when you need more speed.

On a steep downgrade , downshifting helps maintain safe speed and prolongs brake life.

Driving Tips

Passing

For extra power when passing another vehicle or climbing steep grades, depress the accelerator fully. The transaxle will shift to a lower gear, depending on vehicle speed.

Climbing steep grades from a stop

To climb a steep grade from a stopped position:

1. Depress the brake pedal.

2. Shift to D or M1, depending on the load weight and grade steepness.

3. Release all brakes while gradually accelerating.

Descending steep grades

When descending a steep grade, shift to lower gears, depending on load weight and grade steepness. Descend slowly, using the brakes only occasionally to prevent them from overheating.

Power steering is only operable when the engine is running. If the engine is off or if the power steering system is inoperable, you can still steer, but it requires more physical effort.

If the steering feels rigid during normal driving, consult an Authorized Mazda Dealer.

Power Steering

Never hold the steering wheel to the extreme left or right for more than 5 seconds with the engine running. This could damage the power steering system.

CAUTION

J56J_8R29_EA_02I_Edition4.book Page 16 Monday, April 21, 2003 3:44 PM

5-17

Driving Your Mazda

Starting and Driving

Form No. 8R29-EA-02I

With cruise control, you can set and automatically maintain any speed of more than about 40 km/h (25 mph).

Cruise Main Indicator Light

This light comes on when the ON/OFF switch is pressed and the cruise control system is activated.

Cruise Set Indicator Light

This light comes on when a cruising speed is set.

Activation/Deactivation

To activate the system, press the ON/OFF switch. The cruise main indicator light illuminates.

To deactivate the system, press the switch again. The cruise main indicator light turns off.

Cruise Control

Cruise Control Use: Using cruise control in the following conditions could cause you to lose control of the vehicle: Heavy or unsteady traffic Slippery or winding roads Similar restrictions that require

inconsistent speed Dont use cruise control in these situations.

WARNING

Cruise Main Switch: Leaving the ON/OFF switch on when not using the cruise control is dangerous as it may be switched on accidentally. This could result in loss of vehicle control. Keep the ON/OFF switch off when cruise control is not in use.

WARNING

J56J_8R29_EA_02I_Edition4.book Page 17 Monday, April 21, 2003 3:44 PM

5-18

Driving Your Mazda

Starting and Driving

Form No. 8R29-EA-02I

To Set Speed

1. Activate the cruise control system.

2. Accelerate to the desired speed, which must be more than 40 km/h (25 mph).

3. Press the SET/COAST button and release it at the speed you want. Release the accelerator at the same time.

Dont continue to hold in the button. Until you release it, speed will continue to drop (unless you continue to accelerate) and youll miss the desired speed.

To Increase Cruising Speed

Follow either of these procedures.

Press the RESUME/ACCEL button and hold it. Your vehicle will accelerate. Release the button at the speed you want.

Your vehicle has a tap-up feature that allows you to increase your current speed in increments of 1.6 km/h (1 mph) by a momentary tap of the RESUME/ACCEL button. Multiple taps will increase your vehicle speed 1.6 km/h (1 mph) for each tap.

Accelerate to the desired speed. Press the SET/COAST button and release it immediately.

NOTE

The SET function cant be activated until about 2 seconds after the ON/ OFF switch has been engaged.

On a steep grade, the vehicle may momentarily slow down going up or speed up while going down.

J56J_8R29_EA_02I_Edition4.book Page 18 Monday, April 21, 2003 3:44 PM

5-19

Driving Your Mazda

Starting and Driving

Form No. 8R29-EA-02I

To Decrease Cruising Speed

Press the SET/COAST button and hold it. The vehicle will gradually slow. Release the button at the speed you want.

Your vehicle has a tap-down feature that allows you to decrease your current speed in decrements of 1.6 km/h (1 mph) by a momentary tap of the SET/COAST button. Multiple taps will decrease your vehicle speed 1.6 km/h (1 mph) for each tap.

To Resume Cruising Speed at More Than 40 km/h (25 mph)

If some other method besides the ON/ OFF switch was used to cancel cruising speed and the system is still activated, the most recent set speed will automatically resume when the RESUME/ACCEL button is pressed. If vehicle speed is below 40 km/h (25 mph), increase the vehicle speed up to 40 km/h (25 mph) and press the RESUME/ ACCEL button.

NOTE

Accelerate if you want to speed up temporarily when the cruise control is on. Greater speed will not interfere with it or change the set speed. Take your foot off the accelerator to return to the set speed.

J56J_8R29_EA_02I_Edition4.book Page 19 Monday, April 21, 2003 3:44 PM

5-20

Driving Your Mazda

Starting and Driving

Form No. 8R29-EA-02I

To Cancel

To turn off the system, use one of these methods:

Press the ON/OFF switch.

Slightly depress the brake pedal.

Press the CANCEL button.

(Manual transaxle) Depress the clutch pedal.

The system is off when the ignition is off.

The Traction Control System (TCS) enhances traction and safety by regulating engine torque. When the TCS detects driving wheel slippage, it lowers engine torque to prevent loss of traction.

This means that on a slick surface, the engine adjusts automatically to provide optimum power to the drive wheels without causing them to spin and lose traction.

NOTE

Cruise control will cancel at about 15 km/h (9 mph) below the preset speed or below 40 km/h (25 mph).

Traction Control System (TCS)

TCS and Unsafe Driving: The traction control system (TCS) cannot compensate for unsafe and reckless driving, excessive speed, tailgating (following another vehicle too closely), and hydroplaning (reduced tire friction and road contact because of water on the road surface). You can still have an accident. So dont rely on the traction control system as a substitute for safe driving.

TCS and Snow and Ice: Driving without proper traction devices on snow and ice-covered roads is dangerous. The traction control system (TCS) alone cannot provide adequate traction and you could still have an accident. Use snow tires or tire chains and drive at reduced speeds when roads are covered with ice and snow.

WARNING

J56J_8R29_EA_02I_Edition4.book Page 20 Monday, April 21, 2003 3:44 PM

5-21

Driving Your Mazda

Starting and Driving

Form No. 8R29-EA-02I

TCS Indicator Light

This indicator light stays on for a few seconds when the ignition switch is turned to the ON position. If the TCS is operating, the indicator light flashes.

If the light stays on, the TCS may have a malfunction and it may not operate correctly. Take your vehicle to an Authorized Mazda Dealer.

TCS OFF Indicator Light

This indicator light stays on for a few seconds when the ignition switch is turned to the ON position. It also comes on when the TCS OFF switch is pressed and TCS is switched off.

If the light stays on when the TCS is not switched off, take your vehicle to an Authorized Mazda Dealer. The TCS may have a malfunction.

NOTE

In addition to the indicator light flashing, a slight lugging sound will come from the engine. This indicates that the TCS is operating properly.

On slippery surfaces, such as fresh snow, it will be impossible to achieve high rpm when the TCS is on.

NOTE

After starting the engine when the coolant temperature is extremely low, the TCS is automatically turned off. At this time, the TCS OFF indicator light will remain on, but this does not indicate an abnormality. After the engine has warmed, TCS will resume normal operation and the indicator light will go out.

J56J_8R29_EA_02I_Edition4.book Page 21 Monday, April 21, 2003 3:44 PM

5-22

Driving Your Mazda

Starting and Driving

Form No. 8R29-EA-02I

TCS OFF Switch

Press the TCS OFF switch to turn off the TCS. The TCS OFF indicator light will illuminate.

Press the switch again to turn the TCS back on. The TCS OFF indicator light will go out.

NOTE

When TCS is on and you attempt to free the vehicle when it is stuck, or drive it out of freshly fallen snow, the TCS will activate. Depressing the accelerator will not increase engine power and freeing the vehicle may be difficult. When this happens, turn off the TCS.

If the TCS is off when the engine is turned off, it automatically activates when the ignition switch is turned on.

Leaving the TCS on will provide the best traction.

J56J_8R29_EA_02I_Edition4.book Page 22 Monday, April 21, 2003 3:44 PM

5-23

Driving Your Mazda

Form No. 8R29-EA-02I

Instrument Cluster and Indicators

(Black-out meter) When the ignition switch is in the ON position, the dashboard gauges illuminate.

1 Speedometer ..............................................................................................................5-24

2 Odometer and Trip Meter ..........................................................................................5-24

3 Tachometer ................................................................................................................5-25

4 Engine Coolant Temperature Gauge..........................................................................5-25

5 Fuel Gauge................................................................................................................ 5-26

6 Instrument Cluster Dimmer Select Button (Black-out meter)...................................5-26

Meters and Gauges

J56J_8R29_EA_02I_Edition4.book Page 23 Monday, April 21, 2003 3:44 PM

5-24

Driving Your Mazda

Instrument Cluster and Indicators

Form No. 8R29-EA-02I

Speedometer

The speedometer indicates the speed of the vehicle.

Odometer and Trip Meter

The display mode can be changed between trip meter A and trip meter B by pressing the selector while they are displayed. The selected mode will be displayed.

Odometer

The odometer records the total distance the vehicle has been driven.

Trip meter

The trip meter can record the total distance of two trips. One is recorded in trip meter A, and the other is recorded in trip meter B.

For instance, trip meter A can record the distance from the point of origin, and trip meter B can record the distance from where the fuel tank is filled.

When trip meter A is selected, pressing the selector again within one second will change to trip meter B mode.

When trip meter A is selected, TRIP A will be displayed. When trip meter B is selected, TRIP B will be displayed.

Selector

Odometer

Trip meter

Odometer

Odometer

Trip meter A

Press the selector

Press the selector

Trip meter B

NOTE

(Standard meter) The odometer and trip meter can be displayed as follows even when the ignition switch is in the ACC or LOCK position. The headlight switch must be in the or position to see the display.

Displays for 10 minutes after the ignition switch is turned to the ACC or LOCK position from the ON position.

Displays for 10 minutes after any door is opened.

J56J_8R29_EA_02I_Edition4.book Page 24 Monday, April 21, 2003 3:44 PM

5-25

Driving Your Mazda

Instrument Cluster and Indicators

Form No. 8R29-EA-02I

The trip meter records the total distance the vehicle is driven until the meter is again reset. Return it to "0.0" by holding the selector depressed for more than 1 second. Use this meter to measure trip distances and to compute fuel consumption.

Tachometer

The tachometer shows engine speed in thousands of revolutions per minute (rpm).

Engine Coolant Temperature Gauge

The engine coolant temperature gauge shows the temperature of the engine coolant.

If the needle exceeds normal range toward H, it indicates overheating.

NOTE

Only the trip meters record tenths of kilometers (miles).

The trip record will be erased when;

The power supply is interrupted (blown fuse or the battery is disconnected).

The vehicle is driven over 999.9 km (mile).

Dont run the engine with the tachometer needle in the RED ZONE. This may cause severe engine damage.

Red zone

CAUTION

Driving with an overheated engine can cause serious engine damage (page 7- 12).

CAUTION

J56J_8R29_EA_02I_Edition4.book Page 25 Monday, April 21, 2003 3:44 PM

5-26

Driving Your Mazda

Instrument Cluster and Indicators

Form No. 8R29-EA-02I

Fuel Gauge

The fuel gauge shows approximately how much fuel is in the tank. We recommend keeping the tank over 1/4 full. When the low fuel warning light illuminates or when the needle is near E, refuel as soon as possible.

Dashboard Illumination

When the headlight switch is in the or position, rotate the thumb-wheel to

adjust the brightness of the dashboard lights.

Instrument Cluster Dimmer Select Button (Black-out meter)

The instrument cluster dimmer select button is operable when the ignition switch is in the ON position.

Adjusting the instrument cluster illumination intensity (With exterior lights off)*

When the exterior lights are off (headlight switch is in the OFF position), the instrument cluster illumination can be adjusted to one of five levels by successively pressing the instrument cluster dimmer select button. * This function applies only to some

black-out meter equipped vehicles.

Canceling the instrument cluster illumination dimmer (With exterior lights on)

When the exterior lights are on (headlight switch is in the or position), the instrument cluster illumination dims. When driving on snowy or foggy roads, or in other situations when the instrument cluster's visibility is reduced due to glare from surrounding brightness, the instrument cluster dimmer select button increases the illumination intensity. Press the button to increase the intensity of the instrument cluster illumination. Press the button again to return to the previous illumination intensity.

NOTE

Black-out meter When the instrument cluster dimmer is canceled, the instrument cluster illumination intensity will not change by rotating the thumb wheel.

Low fuel warning light

Bright

Dim

Instrument cluster dimmer select button

J56J_8R29_EA_02I_Edition4.book Page 26 Monday, April 21, 2003 3:44 PM

5-27

Driving Your Mazda

Form No. 8R29-EA-02I

Warning/Indicator Lights and Beeps

Warning/Indicator Lights

Signal Warning/Indicator Lights Page

Brake System Warning Light 5-29

Charging System Warning Light 5-30

Engine Oil Pressure Warning Light 5-30

Check Engine Light 5-31

ABS Warning Light 5-31

Air Bag/Front Seat Belt Pretensioner System Warning Light 5-32

Low Fuel Warning Light 5-32

Warning/Indicator lights will appear in any of the highlighted areas

J56J_8R29_EA_02I_Edition4.book Page 27 Monday, April 21, 2003 3:44 PM

5-28

Driving Your Mazda

Warning/Indicator Lights and Beeps

Form No. 8R29-EA-02I

Seat Belt Warning Light 5-32

Door-Ajar Warning Light 5-33

Low Washer Fluid Level Warning Light 5-33

Automatic Transaxle Warning Light 5-33

Security Indicator Light 5-33

Headlight High-Beam Indicator Light 5-34

Shift Position Indicator Light 5-34

TCS Indicator Light 5-35

TCS OFF Indicator Light 5-35

Cruise Main Indicator Light 5-36

Cruise Set Indicator Light 5-36

Light-On Indicator Light 5-36

Signal Warning/Indicator Lights Page

J56J_8R29_EA_02I_Edition4.book Page 28 Monday, April 21, 2003 3:44 PM

5-29

Driving Your Mazda

Warning/Indicator Lights and Beeps

Form No. 8R29-EA-02I

Brake System Warning Light

This warning has the following functions:

Parking brake warning

The light comes on when the parking brake is applied with the ignition switch in the START or ON position. It goes off when the parking brake is fully released.

Low brake fluid level warning/ Electronic brake force distribution system warning

If the light stays on after the parking brake is fully released, you may have a brake problem.

Drive to the side of the road and park off the right-of-way.

Low brake fluid level warning

You may notice that the pedal is harder to push or that it may go closer to the floor. In either case, it will take longer to stop the vehicle.

1. With the engine stopped, check the brake fluid level immediately and add fluid as required (page 8-15).

2. After adding fluid, check the light again.

If the warning light remains on, or if the brakes do not operate properly, do not drive the vehicle. Have it towed to an Authorized Mazda Dealer.

Even if the light goes off, have your brake system inspected as soon as possible.

Electronic brake force distribution system warning

If the electronic brake force distribution control unit determines that some components are operating incorrectly, the control unit may turn the brake system warning light on. In this case, the ABS warning light comes on at the same time (page 5-31).

J56J_8R29_EA_02I_Edition4.book Page 29 Monday, April 21, 2003 3:44 PM

5-30

Driving Your Mazda

Warning/Indicator Lights and Beeps

Form No. 8R29-EA-02I

Charging System Warning Light

This warning light comes on when the ignition switch is turned to the ON position and goes off when the engine is started.

If the warning light comes on while driving, it indicates a malfunction of the alternator or of the charging system. Drive to the side of the road and park off the right-of-way. Consult an Authorized Mazda Dealer.

Engine Oil Pressure Warning Light

This warning light indicates low engine oil pressure.

If the light comes on while driving:

1. Drive to the side of the road and park off the right-of-way.

Brake Warning Light: Driving with the brake system warning light on is dangerous. It indicates that your brakes may not work at all or that they could completely fail at any time. If this light remains on, after checking that the parking brake is released, have the brakes inspected immediately. Dont drive with this light on, and contact an Authorized Mazda Dealer to have the brakes inspected as soon as possible.

ABS Warning Light and Brake Warning Light on at the Same Time: Driving when the brake system warning light and ABS warning light are on at the same time is dangerous. When both lights are on, the rear wheels could lock more quickly in an emergency stop than under normal circumstances. Dont drive with both lights on, and contact an Authorized Mazda Dealer to have the brakes inspected as soon as possible.

WARNING

Dont continue driving when the charging system warning light is illuminated.

CAUTION

J56J_8R29_EA_02I_Edition4.book Page 30 Monday, April 21, 2003 3:44 PM

5-31

Driving Your Mazda

Warning/Indicator Lights and Beeps

Form No. 8R29-EA-02I

2. Turn off the engine and inspect the engine oil level (page 8-10). If its low, add oil.

3. Check the light.

If the light remains on even after you add oil, have your vehicle towed to the nearest service station or to an Authorized Mazda Dealer.

Check Engine Light

If this light comes on while driving, the vehicle may have a problem. It is important to note the driving conditions when the light came on and consult an Authorized Mazda Dealer.

The check engine light may come on in the following cases:

The fuel tank level being very low or approaching empty.

The engines electrical system has a problem.

The emission control system has a problem.

The fuel-filler cap is missing or not tightened securely.

If the check engine light remains on, do not drive at high speeds and consult an Authorized Mazda Dealer as soon as possible.

ABS Warning Light

The warning light stays on for a few seconds when the ignition switch is turned to the ON position.

If the ABS warning light stays on while youre driving, the ABS control unit has detected a system malfunction. If this occurs, your brakes will function normally as if the vehicle had no ABS. Should this happen, consult an Authorized Mazda Dealer as soon as possible.

Dont run the engine if oil pressure is low. It could result in extensive engine damage.

CAUTION

ABS Warning Light and Brake Warning Light on at the Same Time: Driving when the brake system warning light and ABS warning light are on at the same time is dangerous. When both lights are on, the rear wheels could lock more quickly in an emergency stop than under normal circumstances. Dont drive with both lights on, and contact an Authorized Mazda Dealer to have the brakes inspected as soon as possible.

WARNING

J56J_8R29_EA_02I_Edition4.book Page 31 Monday, April 21, 2003 3:44 PM

5-32

Driving Your Mazda

Warning/Indicator Lights and Beeps

Form No. 8R29-EA-02I

Air Bag/Front Seat Belt Pretensioner System Warning Light

If the air bag/front seat belt pretensioner system is OK, the warning light comes on when the ignition switch is turned to the ON position or after the engine is cranked. After about 6 seconds it goes out.

A system malfunction is indicated when the warning light constantly flashes, stays on or doesnt come on at all when the ignition switch is turned to the ON position. If any of these occur, consult an Authorized Mazda Dealer as soon as possible. The system may not work in an accident.

Low Fuel Warning Light

This warning light in the fuel gauge signals that the fuel tank will soon be empty. Get fuel as soon as possible.

Seat Belt Warning Light

If the drivers seat belt is not fastened when the ignition switch is turned to the ON position, the seat belt warning light will remain on until the belt is fastened. If the system does not operate correctly, consult an Authorized Mazda Dealer.

NOTE

When the engine is jump-started to charge the battery, uneven rpm occurs and the ABS warning light comes on. This is due to a weak battery, not a malfunction. Recharge the battery.

Self-Servicing the Air Bag/ Pretensioner Systems: Self-servicing or tampering with the systems is dangerous. An air bag/ pretensioner could accidentally activate or become disabled. This could cause serious injuries. Never tamper with the systems and always have an Authorized Mazda Dealer perform all servicing and repairs.

WARNING

Low fuel warning light

J56J_8R29_EA_02I_Edition4.book Page 32 Monday, April 21, 2003 3:44 PM

5-33

Driving Your Mazda

Warning/Indicator Lights and Beeps

Form No. 8R29-EA-02I

Door-Ajar Warning Light

This warning light comes on when any door isnt securely closed.

Low Washer Fluid Level Warning Light

This warning light reveals that little windshield washer fluid remains. Add fluid (page 8-19).

Automatic Transaxle Warning Light

This warning light stays on for a few seconds when the ignition switch is turned to the ON position. The light illuminates when the transaxle has a problem.

Security Indicator Light

This indicator light starts flashing every 2 seconds when the ignition switch is turned from the ON to the ACC position and the immobilizer system is armed.

The light stops flashing when the ignition switch is turned to the ON position with the correct ignition key. At this time, the immobilizer system is disarmed and the light illuminates for about 3 seconds and then goes out.

If the engine doesnt start with the correct ignition key, and the security indicator light keeps illuminating or flashing, the system may have a malfunction. Consult an Authorized Mazda Dealer.

If the automatic transaxle warning light flashes, the transaxle has an electrical problem. Continuing to drive your Mazda in this condition could cause damage to your transaxle. Consult an Authorized Mazda Dealer as soon as possible.

CAUTION

J56J_8R29_EA_02I_Edition4.book Page 33 Monday, April 21, 2003 3:44 PM

5-34

Driving Your Mazda

Warning/Indicator Lights and Beeps

Form No. 8R29-EA-02I

Headlight High-Beam Indicator Light

This light indicates one of two things:

The high-beam headlights are on.

The turn signal lever is in the flash-to- pass position.

Shift Position Indicator Light

This indicates the selected shift position when the ignition switch is in the ON position.

In manual mode, the "M" of the shift position indicator illuminates and the numeral for the selected gear illuminates in the gear position indicator.

Gear position indicator

J56J_8R29_EA_02I_Edition4.book Page 34 Monday, April 21, 2003 3:44 PM

5-35

Driving Your Mazda

Warning/Indicator Lights and Beeps

Form No. 8R29-EA-02I

TCS Indicator Light

This indicator light stays on for a few seconds when the ignition switch is turned to the ON position. If the TCS is operating, the indicator light flashes.

If the light stays on, the TCS may have a malfunction and it may not operate correctly. Take your vehicle to an Authorized Mazda Dealer.

TCS OFF Indicator Light

This indicator light stays on for a few seconds when the ignition switch is turned to the ON position. It also comes on when the TCS OFF switch is pressed and TCS is switched off.

If the light stays on when the TCS is not switched off, take your vehicle to an Authorized Mazda Dealer. The TCS may have a malfunction.

NOTE

In addition to the indicator light flashing, a slight lugging sound will come from the engine. This indicates that the TCS is operating properly.

On slippery surfaces, such as fresh snow, it will be impossible to achieve high rpm when the TCS is on.

NOTE

After starting the engine when the coolant temperature is extremely low, the TCS is automatically turned off. At this time, the TCS OFF indicator light will remain on, but this does not indicate an abnormality. After the engine has warmed, TCS will resume normal operation and the indicator light will go out.

J56J_8R29_EA_02I_Edition4.book Page 35 Monday, April 21, 2003 3:44 PM

5-36

Driving Your Mazda

Warning/Indicator Lights and Beeps

Form No. 8R29-EA-02I

Cruise Main Indicator Light

This light comes on when the ON/OFF switch is pressed and the cruise control system is activated.

Cruise Set Indicator Light

This light comes on when a cruising speed is set.

Light-On Indicator Light (Black- out meter)

This indicator light comes on when the exterior lights are on.

Ignition Key Reminder

If the ignition switch is in the LOCK or ACC position, a beep will sound when the drivers door is opened.

Lights-On Reminder

If lights are on and the key is removed from the ignition switch, a beep will sound when the drivers door is opened.

Beeps

J56J_8R29_EA_02I_Edition4.book Page 36 Monday, April 21, 2003 3:44 PM

5-37

Driving Your Mazda

Form No. 8R29-EA-02I

Switches and Controls

Headlights

To turn on the lights, turn the knob on the end of the control lever.

Lights-On Reminder

If lights are on and the key is removed from the ignition switch, a beep will sound when the drivers door is opened.

Headlight High-Low Beam

Push the lever forward for high beam. Pull it back for low.

Flashing the Headlights

To flash the headlights, pull the lever fully toward you. The headlight switch need not be on, and the lever will return to the normal position when released.

Lighting Control

Lever Position OFF

Headlights Off Off On Taillights Parking lights License lights

Off On On

NOTE

If the light switch is left on, the lights will automatically switch off 30 seconds after turning the ignition switch to the LOCK position or removing the key.

The lights will automatically switch back on when the ignition switch is turned to the ACC or ON position.

To prevent discharging the battery, dont leave the lights on while the engine is off.

Low beam

High beam

J56J_8R29_EA_02I_Edition4.book Page 37 Monday, April 21, 2003 3:44 PM

5-38

Driving Your Mazda

Switches and Controls

Form No. 8R29-EA-02I

Daytime Running Lights (Canada)

In Canada, vehicles must be driven with the headlights on during daytime operation.

For that reason, the daytime running lights automatically turn on when the ignition switch is turned to the ON position.

Turn Signal

Move the signal lever down (for a left turn) or up (for a right turn) to the stop position. The signal will self-cancel after the turn is completed.

If the indicator light continues to flash after a turn, manually return the lever to its original position.

Green indicators on the dashboard show which signal is working.

Lane-change signals

Move the lever slightly toward the direction of the change until the indicator flashes and hold it there. It will return to the off position when released.

NOTE

The running lights go off when the parking brake is applied.

Turn and Lane-Change Signals

NOTE

If an indicator light stays on without flashing or if it flashes abnormally, the turn signal bulb may be burned out.

Right turn

Left turn

Right lane change

Left lane change

OFF

J56J_8R29_EA_02I_Edition4.book Page 38 Monday, April 21, 2003 3:44 PM

5-39

Driving Your Mazda

Switches and Controls

Form No. 8R29-EA-02I

Use this switch to turn on the fog lights. They help you to see as well as to be seen.

To turn the front fog lights on, rotate the fog light switch to the position. The headlight switch must be in the position to turn on the front fog lights.

To turn them off, rotate the fog light switch to the or OFF position or turn the headlight switch to the OFF position.

The ignition switch must be in the ON position.

Fog Lights

NOTE

The fog lights will turn off when the headlights are set at high beam.

Fog light switch

Windshield Wipers and Washer

Frozen Washer Fluid: Using windshield washer fluid in freezing temperatures is dangerous. The washer fluid could freeze on the windshield and block your vision. You could have an accident. Dont use the washer without first warming the windshield.

NOTE

Because heavy ice and snow can jam the wiper blades, the wiper motor is protected from motor breakdown, overheating and possible fire by a circuit breaker. This mechanism will automatically stop operation of the blades, but only for about 5 minutes. If this happens, turn off the wiper switch and park off the right-of-way, and remove the snow and ice. After 5 minutes, turn on the switch and the blades should operate normally. If they dont resume functioning, consult an Authorized Mazda Dealer as soon as possible.

WARNING

J56J_8R29_EA_02I_Edition4.book Page 39 Monday, April 21, 2003 3:44 PM

5-40

Driving Your Mazda

Switches and Controls

Form No. 8R29-EA-02I

Windshield Wipers

Turn the wipers on by pulling the lever down. INT Intermittent 1 Normal 2 Fast

Variable-speed intermittent wipers

Set the lever to INT and choose the interval timing by rotating the ring.

One-touch wipers

For a single wiping cycle, push the lever up to MIST.

Windshield Washer

Pull the lever toward you and hold it to spray washer fluid.

If the washer doesnt work, inspect the fluid level (page 8-19). If its OK, consult an Authorized Mazda Dealer.

OFF

INT

1

2

OFF

INT

INT ring

NOTE

In the OFF or INT position, the wipers will operate continuously until the lever is released.

OFF

MIST

J56J_8R29_EA_02I_Edition4.book Page 40 Monday, April 21, 2003 3:44 PM

5-41

Driving Your Mazda

Switches and Controls

Form No. 8R29-EA-02I

The rear defroster clears frost, fog, and thin ice from the rear window.

The ignition switch must be in the ON position.

Press the switch to turn on the rear window defroster. The rear window defroster operates for about 15 minutes and turns off. The indicator light illuminates during operation.

To turn off the rear window defroster before the 15 minutes has elapsed, press the switch again.

Rear Window Defroster

Manual Type Air-Conditioning

Full-Automatic Type Air-Conditioning

Dont use sharp instruments or window cleaners with abrasives to clean the inside of the rear window surface. They may damage the defroster grid inside the window.

NOTE

This defroster is not designed for melting snow. If there is an accumulation of snow on the rear window, brush it off before using the defroster.

CAUTION

J56J_8R29_EA_02I_Edition4.book Page 41 Monday, April 21, 2003 3:44 PM

5-42

Driving Your Mazda

Switches and Controls

Form No. 8R29-EA-02I

To sound the horn, press around the mark of the steering wheel.

The hazard warning lights should always be used when you stop on or near a roadway.

The hazard warning lights warn other drivers that your vehicle is a traffic hazard and that they must take extreme caution when near it.

Depress the hazard warning switch and all four turn signals will flash at once.

Horn Hazard Warning Flasher

NOTE

The turn signals dont work when the hazard warning lights are on.

Check local regulations about the use of hazard warning lights while the vehicle is being towed. They may forbid it.

Hazard warning flasher switch

J56J_8R29_EA_02I_Edition4.book Page 42 Monday, April 21, 2003 3:44 PM

5-43

Driving Your Mazda

Switches and Controls

Form No. 8R29-EA-02I

The HomeLink system replaces up to 3 hand-held transmitters with a single built- in component in the auto-dimming mirror. Pressing the HomeLink button on the auto-dimming mirror activates garage doors, gates and other devices surrounding your home.

HomeLink Wireless Control System

NOTE

HomeLink and HomeLink house are registered trademarks of Johnson Controls.

HomeLink button

Indicator light

Safety Stop and Reverse Feature: Using the HomeLink system with any garage door opener that lacks the safety stop and reverse feature as required by federal safety standards is dangerous. (This includes garage doors manufactured before April 1, 1982.) Using these garage door openers can increase the risk of serious injury or death. For further information, contact HomeLink at 1-800-355-3515 or www.homelink.com or your Authorized Mazda Dealer.

Safety While Programming or Operating HomeLink System: Programming or operating the HomeLink system without verifying the safety of areas surrounding garage doors and gates is dangerous and could result in an unexpected accident and serious injury if someone were to be hit. Always check the areas surrounding garage doors and gates for people or obstructions before programming or during operation of the HomeLink system.

HomeLink has been tested and complies with FCC and Industry Canada rules. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the device.

WARNING

CAUTION

J56J_8R29_EA_02I_Edition4.book Page 43 Monday, April 21, 2003 3:44 PM

5-44

Driving Your Mazda

Switches and Controls

Form No. 8R29-EA-02I

Pre-programming the HomeLink System

Verify that there is a remote control transmitter available for the device you would like to program.

Disconnect the power to the device.

Programming the HomeLink System

The HomeLink system provides 3 buttons which can be individually selected and programmed using the transmitters for current, on-market devices as follows:

1. Press and hold the two outer HomeLink buttons (buttons one and three) - releasing only when the indicator light begins to flash (after 20 seconds). Do not hold the buttons for longer than 30 seconds and do not repeat step 1 to program a second and/ or third hand-held transmitter to the remaining two HomeLink buttons.

2. Position the end of your hand-held transmitter 2.57.5 cm (13 inches) away from the HomeLink button you wish to program while keeping the indicator light in view.

3. Simultaneously press and hold both the chosen HomeLink and hand-held transmitter buttons. Do not release the buttons until step 4 has been completed.

NOTE

FCC ID: NZLSTDHL3 CANADA:4112104541A This device complies with FCC rules part 15. Operation is subject to the following conditions: 1- This device may not cause any harmful interference and 2- This device must accept any interference that may be received including interference that may cause undesired operation.

NOTE

The programming will not be erased even if the battery is disconnected.

NOTE

It is recommended that a new battery be placed in the hand-held transmitter of the device being programmed to HomeLink for quicker training and accurate transmission of the radio- frequency signal.

When programming a garage door opener or a gate, disconnect the power to these devices before performing programming, as continuous operation of the devices could damage the motor.

NOTE

Some gate operators and garage door openers may require you to replace this Programming Step 3 with procedures noted in the "Gate Operator/Canadian Programming" section.

CAUTION

J56J_8R29_EA_02I_Edition4.book Page 44 Monday, April 21, 2003 3:44 PM

5-45

Driving Your Mazda

Switches and Controls

Form No. 8R29-EA-02I

4. After the HomeLink indicator light changes from a slow to a rapidly blinking light, release both the HomeLink and hand-held transmitter buttons.

5. Press and hold the just-trained HomeLink button and observe the indicator light.

If the indicator light stays on constantly, programming is complete and your device should activate when the HomeLink button is pressed and released.

If the indicator light blinks rapidly for two seconds and then turns to a constant light, continue with "Programming" steps 68 to complete the programming of a rolling code equipped device (most commonly a garage door opener).

6. At the garage door opener receiver (motor-head unit) in the garage, locate the "learn" or "smart" button. This can usually be found where the hanging antenna wire is attached to the motor- head unit.

7. Firmly press and release the "learn" or "smart" button. (The name and color of the button may vary by manufacturer.)

8. Return to the vehicle and firmly press, hold for two seconds and release the programmed HomeLink button. Repeat the "press/hold/release" sequence a second time, and, depending on the brand of the garage door opener (or other rolling code equipped device), repeat this sequence a third time to complete the programming process.

HomeLink should now activate your rolling code equipped device.

For questions or comments, please contact HomeLink at www.homelink.com or 1-800-355-3515.

NOTE

If the HomeLink indicator light does not change to a rapidly blinking light, contact HomeLink at www.homelink.com or call 1-800-355- 3515 for assistance.

NOTE

To program the remaining two HomeLink buttons, begin with "Programming" - step 2. Do not repeat step 1.

NOTE

There are 30 seconds in which to initiate step 8.

NOTE

To program the remaining two HomeLink buttons, begin with "Programming" - step 2. Do not repeat step 1.

J56J_8R29_EA_02I_Edition4.book Page 45 Monday, April 21, 2003 3:44 PM

5-46

Driving Your Mazda

Starting and Driving

Form No. 8R29-EA-02I

Gate operator/Canadian Programming

Canadian radio-frequency laws require transmitter signals to "time-out"(or quit) after several seconds of transmission - which may not be long enough for HomeLink to pick up the signal during programming. Similar to this Canadian law, some U.S. gate operators are designed to "time-out" in the same manner.

If you live in Canada or you are having difficulties programming a gate operator by using the "Programming" procedures (regardless of where you live), replace "Programming HomeLink" step 3 with the following:

3. Continue to press and hold the HomeLink button while you press and release - every two seconds ("cycle") your hand-held transmitter until the frequency signal has successfully been accepted by HomeLink. (The indicator light will flash slowly and then rapidly.)

Proceed with "Programming" step 4 to complete.

Operating the HomeLink System

Press the programmed HomeLink button to operate a programmed device. The code will continue being transmitted for a maximum of 20 seconds.

Reprogramming the HomeLink system

To program a device to HomeLink using a HomeLink button previously trained, follow these steps:

1. Press and hold the desired HomeLink button. DO NOT release the button.

2. The indicator light will begin to flash after 20 seconds. Without releasing the HomeLink button, proceed with "Programming" - step 2.

Erasing Programmed HomeLink Buttons

To erase the existing programming from all three operating channels, press and hold the two outside buttons ( , ) on the auto-dimming mirror until the HomeLink indicator light begins to flash after approximately 20 seconds. Verify that the programming has been erased when you resell the vehicle.

NOTE

If programming a garage door opener or gate operator, it is advised to unplug the device during the "cycling" process to prevent possible overheating.

J56J_8R29_EA_02I_Edition4.book Page 46 Monday, April 21, 2003 3:44 PM

6-1

Form No. 8R29-EA-02I

6 Interior Comfort

Use of various features for drive comfort, including climate control and audio system.

Climate Control System ................................................................ 6-2 Operating Tips ........................................................................... 6-2 Vent Operation ........................................................................... 6-3 Types of the Climate Control System ........................................ 6-5 Manual Type .............................................................................. 6-6 Fully Automatic Type .............................................................. 6-11

Audio System ............................................................................... 6-16 Antenna ................................................................................... 6-16 Operating Tips for Audio System ............................................ 6-16 Audio Set ................................................................................. 6-23 Audio Control Switch Operation ............................................. 6-40 Safety Certification .................................................................. 6-42

Interior Equipment ..................................................................... 6-43 Sunvisors ................................................................................. 6-43 Interior Lights .......................................................................... 6-43 Information Display ................................................................ 6-46 Lighter ..................................................................................... 6-49 Ashtray .................................................................................... 6-50 Cup Holder .............................................................................. 6-50 Bottle Holder ........................................................................... 6-51 Storage Compartments ............................................................ 6-52 Accessory Socket .................................................................... 6-54

J56J_8R29_EA_02I_Edition4.book Page 1 Monday, April 21, 2003 3:44 PM

6-2

Interior Comfort

Form No. 8R29-EA-02I

Climate Control System

Operating the Climate Control System

Operate the climate control system with the engine running.

Clearing the Air Inlet

Clear all obstructions like leaves, snow and ice from the hood and the air inlet in the cowling grille to improve the system efficiency.

Foggy Windows

The windows may fog up easily in humid weather. Use the climate control system to defog the windows.

To help defog the windows, operate the air conditioner to dehumidify the air.

Outside/Recirculated Air Position

Use the outside air position in normal conditions. The recirculated air position can be used temporarily when driving on dusty roads or for quick cooling of the interior.

Parking in Direct Sunlight

If the vehicle has been parked in direct sunlight during hot weather, open the windows to let warm air escape, then run the climate control system.

Not Using for a Long Period

Run the air conditioner at least once a month to keep internal parts lubricated.

Check the Refrigerant before Weather Gets Hot

Have the air conditioner checked before the weather gets hot. Lack of refrigerant may make the air conditioner less efficient. Consult an Authorized Mazda Dealer for refrigerant inspection.

The air conditioner is filled with HFC134a (R134a), a refrigerant that will not damage the ozone layer. If the air conditioner is low on refrigerant or has a malfunction, consult an Authorized Mazda Dealer.

Replacement of the Cabin Air Filter

If your vehicle is equipped with an air filter for the air conditioner, it is necessary to change the filter periodically as indicated in scheduled maintenance (page 8-3). Consult an Authorized Mazda Dealer for replacement of the cabin air filter.

Operating Tips

J56J_8R29_EA_02I_Edition4.book Page 2 Monday, April 21, 2003 3:44 PM

6-3

Interior Comfort

Climate Control System

Form No. 8R29-EA-02I

Adjusting the Vents

Directing airflow

1. Press the upper part of the air vent to open it.

2. Rotate the air vent left and right to adjust the direction of airflow.

Vent Operation

NOTE

When using the air conditioner, mist may come out from the vents. This is not a sign of trouble but a result of humid air being suddenly cooled.

J56J_8R29_EA_02I_Edition4.book Page 3 Monday, April 21, 2003 3:44 PM

6-4

Interior Comfort

Climate Control System

Form No. 8R29-EA-02I

Selecting the Airflow Mode

Dashboard and Floor Vents Defroster Vents

Floor Vents

Dashboard Vents Defroster and Floor Vents

J56J_8R29_EA_02I_Edition4.book Page 4 Monday, April 21, 2003 3:44 PM

6-5

Interior Comfort

Climate Control System

Form No. 8R29-EA-02I

Manual type and fully automatic type climate control systems are explained separately. Check your vehicles climate control type and read the appropriate pages. Climate control information is displayed on the information display.

Manual Type ...................................................................................................................6-6

Fully Automatic Type ................................................................................................... 6-11

Types of the Climate Control System

J56J_8R29_EA_02I_Edition4.book Page 5 Monday, April 21, 2003 3:44 PM

6-6

Interior Comfort

Climate Control System

Form No. 8R29-EA-02I

Control Switches

Temperature control dial

This dial controls temperature. Turn it clockwise for hot and counterclockwise for cold.

Fan control dial

This dial allows variable fan speeds. 0Fan off 1Low speed 2Medium low speed 3Medium high speed 4High speed

Manual Type

Temperature control dial Fan control dial Mode selector dial

Air intake selector

A/C Switch Rear window defroster switch (page 5-41)

Cold Hot

J56J_8R29_EA_02I_Edition4.book Page 6 Monday, April 21, 2003 3:44 PM

6-7

Interior Comfort

Climate Control System

Form No. 8R29-EA-02I

Mode selector dial

Turn the mode selector dial to select airflow mode (page 6-4).

A/C switch

Push the switch to turn the air conditioner on. An indicator light on the switch will illuminate when the fan control dial is on.

Push the switch once again to turn the air conditioner off.

Air intake selector

This switch controls the source of air entering the vehicle.

Press the switch to alternate between the and positions. The indicator

light for the selected mode will illuminate.

It is recommended that under normal conditions the switch be kept in the outside air position.

Outside air position ( )

Outside air is taken into the vehicle. Use this position for normal ventilation and heating.

Recirculated air position ( )

Outside air is shut off. Air within the vehicle is recirculated.

This position can be used when driving on a dusty road or in similar conditions. It also helps to provide quicker cooling of the interior.

NOTE

The air conditioner may not function when the outside temperature approaches 0 C (32 F).

J56J_8R29_EA_02I_Edition4.book Page 7 Monday, April 21, 2003 3:44 PM

6-8

Interior Comfort

Climate Control System

Form No. 8R29-EA-02I

Heating

1. Set the mode selector dial to the position.

2. Set the air intake selector to the position.

3. Set the temperature control dial to the hot position.

4. Set the fan control dial to the desired speed.

5. If dehumidified heating is desired, turn on the air conditioner.

Cooling (With Air Conditioner)

1. Set the mode selector dial to the position.

2. Set the temperature control dial to the desired position.

3. Set the fan control dial to the desired speed.

4. Turn on the air conditioner.

5. Adjust the fan control dial and temperature control dial to maintain maximum comfort.

The Recirculated Air Position: Using the position in cold or rainy weather will cause the glass to fog up. Your vision will be hampered, which could lead to a serious accident. Do not use the position in cold or rainy weather.

NOTE

If the windshield fogs up easily, set the mode selector dial to the position.

If cooler air is desired at face level, set the mode selector dial at the position and adjust the temperature control dial to maintain maximum comfort.

The air to the floor is warmer than air to the face (except when the temperature control dial is set at the extreme hot or cold position).

WARNING

When using the air conditioner while driving up long hills or in heavy traffic, closely monitor the temperature gauge (page 5-25). The air conditioner may cause engine overheating. If the gauge indicates overheating, turn the air conditioner off.

CAUTION

J56J_8R29_EA_02I_Edition4.book Page 8 Monday, April 21, 2003 3:44 PM

6-9

Interior Comfort

Climate Control System

Form No. 8R29-EA-02I

Ventilation

1. Set the mode selector dial to the position.

2. Set the air intake selector to the position.

3. Set the temperature control dial to the desired position.

4. Set the fan control dial to the desired speed.

Windshield Defrosting and Defogging

1. Set the mode selector dial to the position.

2. Set the temperature control dial to the desired position.

3. Set the fan control dial to the desired speed.

NOTE

When maximum cooling is desired, set the temperature control dial to the extreme cold position and set the air intake selector to the position, then set the fan control dial to the position 4.

If warmer air is desired at floor level, set the mode selector dial at the position and adjust the temperature control dial to maintain maximum comfort.

The air to the floor is warmer than air to the face (except when the temperature control dial is set at the extreme hot or cold position).

Foggy Windshield: Using the position with the temperature control set to the cold position will cause the outside of the glass to fog up. Your vision will be hampered, which could lead to a serious accident. Set the temperature control to the hot or warm position when using the position.

NOTE

For maximum defrosting, set the temperature control dial to the extreme hot position and the fan control dial to position 4.

If warm air is desired at the floor, set the mode selector dial to the position.

In the or position, air conditioning is automatically turned on to defrost the windshield quickly (however, the indicator light does not illuminate) and the position is automatically selected. The air intake selector switch cannot be changed to the position.

WARNING

J56J_8R29_EA_02I_Edition4.book Page 9 Monday, April 21, 2003 3:44 PM

6-10

Interior Comfort

Climate Control System

Form No. 8R29-EA-02I

Dehumidifying (With Air Conditioner)

Operate the air conditioner in cool or cold weather to help defog the windshield and side windows.

1. Set the mode selector dial to the desired position.

2. Set the air intake selector to the position.

3. Set the temperature control dial to the desired position.

4. Set the fan control dial to the desired speed.

5. Turn on the air conditioner.

J56J_8R29_EA_02I_Edition4.book Page 10 Monday, April 21, 2003 3:44 PM

6-11

Interior Comfort

Climate Control System

Form No. 8R29-EA-02I

Control Switches

AUTO switch

By pressing the AUTO switch the following functions will be automatically controlled in accordance with the set temperature:

Airflow temperature

Amount of airflow

Selection of airflow mode

Outside/Recirculated air selection

Air conditioner operation

Fully Automatic Type

Air intake selector Temperature control dialFan control dial

Mode selector switchOFF switch Auto switch

A/C Switch Rear window defroster switch

Windshield defroster switch

(page 5-41)

NOTE

AUTO switch indicator light

When on, it indicates AUTO operation, and the system will function automatically.

When off, indicates the operation of other switches such as the mode selector switch, fan control dial, A/C switch and windshield defroster switch. Other functions will continue to operate automatically.

J56J_8R29_EA_02I_Edition4.book Page 11 Monday, April 21, 2003 3:44 PM

6-12

Interior Comfort

Climate Control System

Form No. 8R29-EA-02I

OFF switch

Pressing the OFF switch shuts off the climate control system.

Temperature control dial

This dial controls temperature.Turn it clockwise for hot and counterclockwise for cold.

Fan control dial

The fan has seven speeds. The selected speed will be displayed.

Mode selector switch

The desired airflow mode can be selected (page 6-4).

A/C switch

With the AUTO or fan control dial ON, press the A/C switch to select the air conditioning (cooling/dehumidifying functions) on or off.

Cold Hot

NOTE

With the airflow mode set to position and the temperature control dial set at a medium temperature, heated air is directed to the feet and a comparably lower air temperature will flow through the central, left and right vents.

J56J_8R29_EA_02I_Edition4.book Page 12 Monday, April 21, 2003 3:44 PM

6-13

Interior Comfort

Climate Control System

Form No. 8R29-EA-02I

Air intake selector switch

Outside or recirculated air positions can be selected. Press the switch to select outside/recirculated air positions.

Recirculated air position ( )

Use this position when going through tunnels, driving in congested traffic (high engine exhaust areas) or when quick cooling is desired.

Outside air position ( )

Use this position for normal conditions and defogging.

Standard Use

1. Press the AUTO switch. Selection of the airflow mode, air intake selector and amount of airflow will be automatically controlled.

2. Use the temperature control dial to select a desired temperature.

To turn off the system, press the OFF switch.

NOTE

The air conditioner may not function when the outside temperature approaches 0 C (32 F). (Indicator remains on even when system is off.)

The Recirculated Air Position: Using the position in cold or rainy weather will cause the glass to fog up. Your vision will be hampered, which could lead to a serious accident. Do not use the position in cold or rainy weather.

WARNING

Cold Hot

J56J_8R29_EA_02I_Edition4.book Page 13 Monday, April 21, 2003 3:44 PM

6-14

Interior Comfort

Climate Control System

Form No. 8R29-EA-02I

Windshield Defrosting and Defogging

Press the windshield defroster switch. In this position, the outside air position is automatically selected, and the air conditioner automatically turned on (however, the indicator light does not illuminate). The air conditioner will direct dehumidified air to the front windshield and side windows (page 6-4). Airflow amount will be increased. To turn off the system press the windshield defroster switch again.

NOTE

First set the temperature to 25.0C (77.0F), then adjust to the desired temperature.

Setting the temperature to maximum high or low will not provide the desired temperature at a faster rate.

To prevent cool air blowing from the vents when heating right after starting the engine, the amount of airflow is reduced until the air warms up.

Foggy Windshield: Using the position with the temperature control set to the cold position will cause the outside of the glass to fog up. Your vision will be hampered, which could lead to a serious accident. Set the temperature control to hot or warm position when using the position.

NOTE

Use the temperature control dial to increase the air flow temperature and defog the glass more quickly.

WARNING

J56J_8R29_EA_02I_Edition4.book Page 14 Monday, April 21, 2003 3:44 PM

6-15

Interior Comfort

Climate Control System

Form No. 8R29-EA-02I

Sunlight/Temperature Sensor

The fully automatic air conditioner function measures inside and outside temperatures, and sunlight. It then sets temperatures inside the passenger compartment accordingly. Dont obstruct the sensor.

Sunlight sensor

Interior temperature sensor

J56J_8R29_EA_02I_Edition4.book Page 15 Monday, April 21, 2003 3:44 PM

6-16

Interior Comfort

Form No. 8R29-EA-02I

Audio System

Rear Window Antenna

The rear window antenna receives both AM and FM signals.

Radio Reception

AM characteristics

AM signals bend around such things as buildings or mountains and bounce off the ionosphere. Therefore, they can reach longer distances than FM signals. Because of this, two stations may sometimes be picked up on the same frequency at the same time.

FM characteristics

An FM broadcast range is usually about 4050 km (2530 miles) from the source. Because of extra coding needed to break the sound into two channels, stereo FM has even less range than monaural (non-stereo) FM.

Antenna

When washing the inside rear window, use a soft cloth dampened in lukewarm water, gently wiping the antenna lines. Use of glass cleaning products could damage the antenna.

CAUTION

Operating Tips for Audio System

Ionosphere

Station 1 Station 2

FM Station

4050 km (2530 miles)

J56J_8R29_EA_02I_Edition4.book Page 16 Monday, April 21, 2003 3:44 PM

6-17

Interior Comfort

Audio System

Form No. 8R29-EA-02I

Signals from an FM transmitter are similar to beams of light because they do not bend around corners, but they do reflect. Unlike AM signals, FM signals cannot travel beyond the horizon. Therefore, FM stations cannot be received at the great distances possible with AM reception.

Atmospheric conditions can also affect FM reception. High humidity will cause poor reception. However, cloudy days may provide better reception than clear days.

Multipath noise

Since FM signals can be reflected by obstructions, it is possible to receive both the direct signal and the reflected signal at the same time. This causes a slight delay in reception and may be heard as a broken sound or a distortion. This problem may also be encountered when in close proximity to the transmitter.

Flutter/Skip noise

Signals from an FM transmitter move in straight lines and become weak in valleys between tall buildings, mountains, and other obstacles. When a vehicle passes through such an area, the reception conditions may change suddenly, resulting in annoying noise.

Weak signal noise

In suburban areas, broadcast signals become weak because of distance from the transmitter. Reception in such fringe areas is characterized by sound breakup.

Ionosphere

100200 km (60120 miles)

FM wave

FM wave

AM wave

Direct Reflected wave

J56J_8R29_EA_02I_Edition4.book Page 17 Monday, April 21, 2003 3:44 PM

6-18

Interior Comfort

Audio System

Form No. 8R29-EA-02I

Strong signal noise

This occurs very close to a transmitter tower. The broadcast signals are extremely strong, so the result is noise and sound breakup at the radio receiver.

Station drift noise

When a vehicle reaches the area of two strong stations broadcasting at similar frequencies, the original station may be temporarily lost and the second station picked up. At this time there will be some noise from this disturbance.

Operating Tips for Cassette Tape Player

Cleaning the cassette tape player

The tape head, capstans, and pinch rollers will gather oxide residue from cassette tapes. This can cause weak or wavering sounds and damage to the cassette tapes and player. Use a good quality head- cleaning tape or a liquid cleaner cassette tape to remove it. Should the unit not operate normally, consult an Authorized Mazda Dealer. Never attempt to repair it or insert a screwdriver or anything else.

Handling the cassette tape player

The following precautions should be observed.

Do not spill any liquid on the audio system.

Do not insert any objects, other than cassette tape, into the slot.

Station 1 88.1 MHz

Station 2 88.3 MHz

J56J_8R29_EA_02I_Edition4.book Page 18 Monday, April 21, 2003 3:44 PM

6-19

Interior Comfort

Audio System

Form No. 8R29-EA-02I

If the cassette tape is loose, it may produce poor sound or performance during playback. Use a pencil or something similar to remove any slack.

Only cassette tapes that play no longer than 90 minutes should be used. Cassette tape exceeding 90 minutes are thin and may easily break.

Do not leave a cassette tape in the tape player slot when not in use. Remove it completely to permit the slot door to close and to protect the mechanism from dust.

Store cassette tapes away from extreme heat, magnetic fields, and direct sunlight. Protect the exposed cassette tape from dirt and damage. Store cassette tapes in their original cases or other protective cases.

Insert only cassette tapes into the slot. If objects other than cassette tapes are inserted, they may damage the player.

Operating Tips for Mini Disc (MD) Player

The following precautions should be observed.

Do not spill any liquid on the audio system.

Do not insert any objects, other than MDs, into the slot.

The MD player has been designed to play MDs bearing the identification logo as shown. No other MDs can be played.

J56J_8R29_EA_02I_Edition4.book Page 19 Monday, April 21, 2003 3:44 PM

6-20

Interior Comfort

Audio System

Form No. 8R29-EA-02I

The MD player can also play MDLPs that have been recorded in MDLP mode. (MDLPs bearing the identification logo as shown below).

When inserting the MD, make sure the MD label is facing up, and the MD is oriented to the insertion slot in the direction of the arrow. If not inserted correctly, the MD will be ejected, or may remain stuck in the MD deck.

Do not touch the internal part of the MD. If the MD shutter is slid open for no reason, it may be broken.

Store MDs in their cases and away from direct sunlight.

Do not insert fingers or foreign objects in the MD insertion slot as it could damage the MD deck.

Operating Tips for CD Player/In- Dash CD Changer

Condensation phenomenon

Immediately after turning on the heater when the vehicle is cold, the CD or optical components (prism and lens) in the CD player/changer may become clouded with condensation. At this time, the CD will eject immediately when placed in the unit. A clouded CD can be corrected simply by wiping it with a soft cloth. Clouded optical components will clear naturally in about an hour. Wait for normal operation to return before attempting to use the unit.

Handling the CD player/In-dash CD changer

The following precautions should be observed.

Do not spill any liquid on the audio system.

J56J_8R29_EA_02I_Edition4.book Page 20 Monday, April 21, 2003 3:44 PM

6-21

Interior Comfort

Audio System

Form No. 8R29-EA-02I

Do not insert any objects, other than CDs, into the slot.

The CD revolves at high speed within the unit. Defective (cracked or badly bent) CDs should never be used.

Do not use non-conventional discs such as heart-shaped, octagonal discs, etc. The CD player/changer could be damaged.

A new CD may have rough edges on its inner and outer perimeters. If a disc with rough edges is used, proper setting will not be possible and the CD player/changer will not play the CD. Remove the rough edges in advance by using a ball-point pen or pencil as shown below. To remove the rough edges, rub the side of the pen or pencil against the inner and outer perimeter of the CD.

When driving over uneven surfaces, the sound may jump.

The CD player/changer has been designed to play CDs bearing the identification logo as shown. No other discs can be played.

J56J_8R29_EA_02I_Edition4.book Page 21 Monday, April 21, 2003 3:44 PM

6-22

Interior Comfort

Audio System

Form No. 8R29-EA-02I

Be sure never to touch the signal surface when handling the CDs. Pick up a CD by grasping the outer edge or the edge of the hole and the outer edge.

Do not stick paper or tape on the CD. Avoid scratching the reverse side (the side without a label).

Dust, finger smudges, and dirt can decrease the amount of light reflected from the signal surface, thus affecting sound quality. If the CD should become soiled, gently wipe it with a soft cloth from the center of the CD to the edge.

Do not use record sprays, antistatic agents, or household spray cleaners. Volatile chemicals such as benzine and thinner can also damage the surface of the CD and must not be used. Anything that can damage, warp, or fog plastic should never be used to clean CDs.

CDs, like traditional audio records, are made of plastic. To avoid warping, keep the CDs in their cases and do not store them where they will be exposed to direct sunlight.

The CD player/changer ejects the CD if the CD is inserted upside down. Also dirty and/or defective CDs may be ejected.

8 cm (3 in) CDs and CD accessories (e.g. 8 cm disc adapter) cannot be used in the CD player/changer.

Do not insert cleaning discs in the CD player/changer.

Do not insert any disc with a peel-off or seal on it.

J56J_8R29_EA_02I_Edition4.book Page 22 Monday, April 21, 2003 3:44 PM

6-23

Interior Comfort

Audio System

Form No. 8R29-EA-02I

Power/Volume/Sound Controls ............................................................................................. 6-24 Operating the Radio ............................................................................................................... 6-28 Operating the Cassette Tape Player ....................................................................................... 6-30 Operating the Mini Disc (MD) Player ................................................................................... 6-32 Operating the Compact Disc (CD) Player ............................................................................. 6-34 Operating the In-Dash CD Changer ...................................................................................... 6-36 Error Indications .................................................................................................................... 6-39

Audio Set

CD Player In-dash CD Changer

Cassette Tape Player Mini Disc (MD) Player

Illustration is of a representative audio unit.

J56J_8R29_EA_02I_Edition4.book Page 23 Monday, April 21, 2003 3:44 PM

6-24

Interior Comfort

Audio System

Form No. 8R29-EA-02I

Power/Volume/Sound Controls

Power ON/OFF

Turn the ignition switch to the ACC or ON position.

Press the power/volume dial to turn the audio system on. Press the power/volume dial again to turn the audio system off.

Volume adjustment

To adjust the volume, turn the power/ volume dial.

Turn the power/volume dial to the right to increase volume, to the left to decrease it.

Audio control dialPower/Volume dial

NOTE

To prevent the battery from being discharged, do not leave the audio system on for a long period when the engine is not running.

J56J_8R29_EA_02I_Edition4.book Page 24 Monday, April 21, 2003 3:44 PM

6-25

Interior Comfort

Audio System

Form No. 8R29-EA-02I

Audio sound adjustment

1. Press the audio control dial to select bass, mid-range, treble, fade, balance or automatic level controls. The selected function will be indicated.

*1Depending on the model, this function, may not be available. *2Depending on the mode selected, the indication changes.

2. Turn the audio control dial to adjust the selected functions as follows:

Indication Turn Left Turn Right

Decrease bass

Increase bass

Decrease mid- range

Increase mid-range

Decrease treble

Increase treble

Shift the sound to the front

Shift the sound to the rear

Shift the sound to the left

Shift the sound to the right

Select mode

Select mode

*

*

NOTE

About 5 seconds after selecting any mode, the volume function will be automatically selected. To reset bass, mid-range, treble, fade, balance and automatic level control, press the audio control dial for 2 seconds. The unit will beep and "CLEAR" will be displayed.

J56J_8R29_EA_02I_Edition4.book Page 25 Monday, April 21, 2003 3:44 PM

6-26

Interior Comfort

Audio System

Form No. 8R29-EA-02I

Automatic Level Control (ALC)

The automatic level control is a feature that automatically adjusts audio volume and sound quality according to the vehicle speed. The volume increases in accordance with the increase in vehicle speed, and decreases as vehicle speed decreases.

The following four modes are available. Select the desired mode.

Turn the audio control dial to select the ALC OFF, ALC LEVEL1~3 mode. The selected mode will be indicated.

Mode Volume change

No change

Minimum

Medium

Maximum

J56J_8R29_EA_02I_Edition4.book Page 26 Monday, April 21, 2003 3:44 PM

6-27

Interior Comfort

Audio System

Form No. 8R29-EA-02I

J56J_8R29_EA_02I_Edition4.book Page 27 Monday, April 21, 2003 3:44 PM

6-28

Interior Comfort

Audio System

Form No. 8R29-EA-02I

Operating the Radio

Radio ON

Press a band selector button ( , or ) to turn the radio on.

Band selection

Select a band by pressing the FM1 button ( ), FM2 button ( ) or AM button ( ).

The selected mode will be indicated. If FM stereo is being received, "ST" will be displayed.

Tuning

The radio has the following tuning methods: Manual, Seek, Scan, Preset channel, and Auto memory tuning. The easiest way to tune stations is to set them on preset channels.

Manual tuning

Turning the manual tuning dial will change the frequency higher or lower.

Manual tuning dialChannel preset buttons

Scan button

Auto memory button

Band selector buttons

Seek tuning button

NOTE

If the FM broadcast signal becomes weak, reception automatically changes from STEREO to MONO for reduced noise, and the "ST" indicator will go out.

NOTE

If the power supply is interrupted (fuse blows or the battery is disconnected), the preset channels will be canceled.

J56J_8R29_EA_02I_Edition4.book Page 28 Monday, April 21, 2003 3:44 PM

6-29

Interior Comfort

Audio System

Form No. 8R29-EA-02I

Seek tuning

Pressing the seek tuning button ( , ) will cause the tuner to seek a higher or lower frequency automatically.

Scan tuning

Press the scan button ( ) to automatically sample strong stations. Scanning stops at each station for about 5 seconds. To hold a station, press the scan button ( ) again during this interval.

Preset channel tuning

The 6 preset channels can be used to store 6 AM and 12 FM stations.

1. To set a channel first select AM, FM1, or FM2. Tune to the desired station.

2. Depress a channel preset button for about 2 seconds until a beep is heard. The preset channel number and station frequency will be displayed. The station is now held in the memory.

3. Repeat this operation for the other stations and bands you want to store. To tune one in the memory, select AM, FM1, or FM2 and then press its channel preset button. The station frequency and the channel number will be displayed.

Auto memory tuning

This is especially useful when driving in an area where the local stations are not known. Additional AM/FM stations can be stored without disturbing the previously set channels.

Press and hold the auto memory button ( ) for about 2 seconds until a beep is heard; the system will automatically scan and temporarily store up to 6 stations with the strongest frequencies in each selected band in that area.

After scanning is completed, the station with the strongest frequency will be tuned and its frequency displayed. Press and release the auto memory button ( ) to recall stations from the auto- stored stations. One stored station will be selected each time; its frequency and channel number will be displayed.

NOTE

If you continue to press and hold the button, the frequency will continue changing without stopping.

NOTE

If the power supply is interrupted (fuse blows or the battery is disconnected), the preset channels will be canceled.

NOTE

If no stations can be tuned after scanning operations, "A" will be displayed.

J56J_8R29_EA_02I_Edition4.book Page 29 Monday, April 21, 2003 3:44 PM

6-30

Interior Comfort

Audio System

Form No. 8R29-EA-02I

Operating the Cassette Tape Player

Cassette tape insert

Insert the cassette tape into the slot, open edge to the right and cassette tape will begin play and "TAPE PLAY" will be displayed. At the end of the cassette tape, the unit automatically reverses cassette tape play. When is lit, the cassette tapes top side is playing. When is lit, the bottom side is on.

Playing

Press the cassette tape play button ( ) to start playing when a cassette tape is in the unit. If there isnt a cassette tape in the unit when the cassette tape play button ( ) is pressed, "NO TAPE" will flash on and off in sequence.

Dolby noise reduction

When using a tape with Dolby NR*, push the Dolby NR button ( ). The symbol will be displayed. To play a tape without Dolby NR, push the button once again.

* Noise reduction system manufactured under license from Dolby Laboratories Licensing Corporation. Dolby and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.

Ejecting the cassette tape

Press the cassette tape eject button ( ) to eject the cassette tape.

Cassette tape play button

Fast-forward button

Rewind button

APC button: (next program)

(one being played)

Cassette tape eject button

Program buttonDolby NR button

Repeat button

J56J_8R29_EA_02I_Edition4.book Page 30 Monday, April 21, 2003 3:44 PM

6-31

Interior Comfort

Audio System

Form No. 8R29-EA-02I

Fast-forward/Rewind

Press the fast-forward button ( ) to fast-forward. Press the rewind button ( ) to rewind. To stop this operation and play the cassette tape, press the button again.

Reversing

Press the program button ( ) to change cassette tape-playing direction.

Automatic program control (APC)

APC is used to find the beginning of either the next program or the one being played.

Press the APC button ( ) to the beginning of the next selection. Press the APC button ( ) to the beginning of the one being played. To stop this operation and play the cassette tape, press the button again.

Repeat play

This operation makes it possible to listen to a selection repeatedly.

Press the repeat button ( ) during play. The current selection playing will be repeated ("RPT" will be displayed). Press the repeat button ( ) once again to cancel repeat play.

NOTE

The cassette tape can be ejected when the ignition switch is in the OFF position.

NOTE

When the cassette tape ends during fast forward or rewind, it automatically stops and starts playing.

NOTE

When the cassette tape ends, the unit automatically reverses play.

NOTE

APC may not operate properly if

A tape was recorded at a low level.

A tape has long, silent intervals.

A tape is a live recording.

A tape has very short intervals of less than 3 seconds.

NOTE

RPT may not operate properly if

A tape was recorded at a low level.

A tape has long, silent intervals.

A tape is a live recording.

A tape has very short intervals of less than 3 seconds.

J56J_8R29_EA_02I_Edition4.book Page 31 Monday, April 21, 2003 3:44 PM

6-32

Interior Comfort

Audio System

Form No. 8R29-EA-02I

Operating the Mini Disc (MD) Player

Inserting the MD

Insert the MD, label-side up with the arrow pointed to the slot. The auto- loading mechanism will set the MD and begin play. There will be a short lapse before play begins while the player reads the digital signals on the MD.

Playing

Press the MD play button ( ) to start playing when a MD is in the unit. If there isnt a MD in the unit when the MD play button ( ) is pressed, "NO DISK" will flash on and off in sequence.

Ejecting the MD

Press the MD eject button ( ) to eject the MD.

Fast-forward/Reverse

Press and hold the fast-forward button ( ) to advance through a track at high speed. Press and hold the reverse button ( ) to reverse through a track at high speed.

Track search

Press the track up button ( ) once to skip forward to the beginning of the next track. Press the track down button ( ) once to skip back to the beginning of the current track.

MD play button

Scan button

MD slot

Display button

Track up button

Track down button Reverse

button

Fast-forward button

MD eject button Random button

Repeat button

Display feed dial

J56J_8R29_EA_02I_Edition4.book Page 32 Monday, April 21, 2003 3:44 PM

6-33

Interior Comfort

Audio System

Form No. 8R29-EA-02I

Music scan

This feature helps to find a program by playing about the first 10 seconds of each track.

Press the scan button ( ) during play to start scan play operation (the track number will flash). Press the scan button ( ) once again to cancel scan play.

Repeat play

This feature makes it possible to listen to a selection repeatedly.

Press the repeat button ( ) during play. The current selection will be repeated ("RPT" will be displayed). Press the repeat button ( ) once again to cancel repeat play.

Random play

This feature allows the MD player to randomly select the order of the songs.

Press the random button ( ) during play. The next selection will be randomly selected ("RDM" will be displayed). Press the random button ( ) once again to cancel random play.

Changing the display

To change the display during MD play, press the display button ( ) to advance through each of the following displays:

Long disc or song titles

When song titles exceed 7 letters, or disc titles exceed 10, rotate the display feed dial ( ) to the right. The remainder of the title will proceed and appear on the display to the end of the title.

NOTE

If the unit is left in scan, normal play will resume where scan was selected.

NOTE

If there is no song or disc title recorded on the MD, "NO TITLE" will be displayed.

Song title Track number/ Elapsed play back time

Disc title

J56J_8R29_EA_02I_Edition4.book Page 33 Monday, April 21, 2003 3:44 PM

6-34

Interior Comfort

Audio System

Form No. 8R29-EA-02I

Operating the Compact Disc (CD) Player

Inserting the CD

Insert the CD into the slot, label-side up. The auto-loading mechanism will set the CD and begin play. There will be a short lapse before play begins while the player reads the digital signals on the CD.

Playing

Press the CD play button ( ) to start playing when a CD is in the unit. If there isnt a CD in the unit when the CD play button ( ) is pressed, "NO DISK" will flash on and off in sequence.

Ejecting the CD

Press the CD eject button ( ) to eject the CD.

Fast-forward/Reverse

Press and hold the fast-forward button ( ) to advance through a track at high speed. Press and hold the reverse button ( ) to reverse through a track at high speed.

Track search

Press the track up button ( ) once to skip forward to the beginning of the next track. Press the track down button ( ) once to skip back to the beginning of the current track.

CD slot CD play button

Fast-forward button

CD eject button

Reverse button

Track up button

Track down button

Scan button

Random button

Repeat button

J56J_8R29_EA_02I_Edition4.book Page 34 Monday, April 21, 2003 3:44 PM

6-35

Interior Comfort

Audio System

Form No. 8R29-EA-02I

Music scan

This feature helps to find a program by playing about the first 10 seconds of each track.

Press the scan button ( ) during play to start scan play operation (the track number will flash). Press the scan button ( ) once again to cancel scan play.

Repeat play

This feature makes it possible to listen to a selection repeatedly.

Press the repeat button ( ) during play. The current selection will be repeated ("RPT" will be displayed). Press the repeat button ( ) once again to cancel repeat play.

Random play

This feature allows the CD player to randomly select the order of the songs.

Press the random button ( ) during play. The next selection will be randomly selected ("RDM" will be displayed). Press the random button ( ) once again to cancel random play.

NOTE

If the unit is left in scan, normal play will resume where scan was selected.

J56J_8R29_EA_02I_Edition4.book Page 35 Monday, April 21, 2003 3:44 PM

6-36

Interior Comfort

Audio System

Form No. 8R29-EA-02I

Operating the In-Dash CD Changer

Inserting the CD

The CD must be label-side up when inserting. The auto-loading mechanism will set the CD and begin play. There will be a short lapse before play begins while the player reads the digital signals on the CD. The disc number and the track number will be displayed.

Normal insertion

1. Press the load button ( ).

2. When "In" is displayed, insert the CD.

Inserting CDs into desired tray number

1. Press and hold the load button ( ) for about 2 seconds until a beep is heard.

2. Press the channel preset button for the desired tray number within 5 seconds after the beep is heard.

3. When "In" is displayed, insert the CD.

Scan button

Track up button

Track down button

Repeat button

Random button

Disc down button

Disc up button

Fast-forward buttonReverse button

Load button CD slot CD play button CD eject button

Channel preset buttons

NOTE

A CD cannot be inserted while the display reads "WAIT". A beeping sound can be heard during this waiting time. Simultaneously pressing the power/volume dial and the load button ( ) for about 2 seconds will turn this beeping sound ON or OFF.

NOTE

The CD cannot be inserted to the desired tray number if the number is already occupied.

J56J_8R29_EA_02I_Edition4.book Page 36 Monday, April 21, 2003 3:44 PM

6-37

Interior Comfort

Audio System

Form No. 8R29-EA-02I

Multiple insertion

1. Press and hold the load button ( ) for about 2 seconds until a beep is heard.

2. When "In" is displayed, insert the CD.

3. When "In" is displayed again, insert the next CD.

Ejecting the CD

Normal ejection

1. Press the CD eject button ( ). The disc number and "DISC OUT" will be displayed.

2. Pull out the CD.

Ejecting CDs from desired tray number

1. Press and hold the CD eject button ( ) for about 2 seconds until a beep is heard.

2. Press the channel preset button for the desired CD number within 5 seconds after the beep is heard.

3. Pull out the CD.

Multiple ejection

1. Press and hold the CD eject button ( ) for about 2 seconds until a beep is heard.

2. Wait 5 seconds or press the CD eject button ( ) again within 5 seconds after the beep is heard.

3. Pull out the CD, then the next CD will be ejected.NOTE

The first-inserted CD will be played automatically when:

No CD is inserted within 15 seconds after "In" is displayed.

The CD trays are full.

NOTE

When the CD is ejected during play, the next CD will be played automatically.

NOTE

CDs will be ejected starting with the one with the lowest number.

All CDs in the tray will be ejected continuously.

CDs can be ejected when the ignition switch is off. Press and hold the CD eject button ( ) for about 2 seconds and all CDs will eject.

J56J_8R29_EA_02I_Edition4.book Page 37 Monday, April 21, 2003 3:44 PM

6-38

Interior Comfort

Audio System

Form No. 8R29-EA-02I

Playing

Press the CD play button ( ) to start playing when a CD is in the unit. If there isnt a CD in the unit when the CD play button ( ) is pressed, "NO DISK" will flash on and off in sequence.

Fast-forward/Reverse

Press and hold the fast-forward button ( ) to advance through a track at high speed. Press and hold the reverse button ( ) to reverse through a track at high speed.

Track search

Press the track up button ( ) once to skip forward to the beginning of the next track. Press the track down button ( ) once to skip back to the beginning of the current track.

Disc search

Press the disc up button ( ) to skip forward to the beginning of the next CD. Press the disc down button ( ) to skip back to the beginning of the previous CD.

Music scan

This feature helps to find a program by playing about the first 10 seconds of each track.

Press the scan button ( ) during play to start scan play operation (the track number will flash). Press the scan button ( ) once again to cancel scan play.

Repeat play

This feature makes it possible to listen to a selection repeatedly.

Press the repeat button ( ) during play. The current selection will be repeated ("RPT" will be displayed). Press the repeat button ( ) once again to cancel repeat play.

Random play

This feature allows the CD player to randomly select the order of the songs.

Press the random button ( ) during play. The next selection will be randomly selected ("RDM" will be displayed). Press the random button ( ) once again to cancel random play.

NOTE

If the unit is left in scan, normal play will resume where scan was selected.

J56J_8R29_EA_02I_Edition4.book Page 38 Monday, April 21, 2003 3:44 PM

6-39

Interior Comfort

Audio System

Form No. 8R29-EA-02I

Error Indications

If you see an error indication on the display, find the cause in the chart. If you cannot clear the error indication, take the vehicle to an Authorized Mazda Dealer.

Indication Cause Solution

CHECK MD MD is inserted upside down Insert the MD properly. If the error indication does not disappear, consult an Authorized Mazda Dealer

CHECK MD MD is defective Insert another MD properly. If the error indication does not disappear, consult an Authorized Mazda Dealer

CHECK CD CD is inserted upside down Insert the CD properly. If the error indication does not disappear, consult an Authorized Mazda Dealer

CHECK CD CD is defective Check the CD for scratches or soiling

J56J_8R29_EA_02I_Edition4.book Page 39 Monday, April 21, 2003 3:44 PM

6-40

Interior Comfort

Audio System

Form No. 8R29-EA-02I

Adjusting the Volume

To increase the volume, press volume button ( ).

To decrease the volume, press volume button ( ).

Changing the Source

Press the mode switch ( ) to change the audio source (AM radio>FM1 radio>FM2 radio>Cassette tape player or MD player>CD player or CD changer>cyclical).

Seek Switch

When listening to the radio

Press the seek switch ( , ) to recall previously stored radio stations. Press the seek switch ( , ), the radio switches to the next/previous stored station in the order that it was stored (1~6).

Audio Control Switch Operation

NOTE

Mazda installed this system to help you avoid being too distracted using audio controls on the dashboard. Always make safe driving your first priority.

J56J_8R29_EA_02I_Edition4.book Page 40 Monday, April 21, 2003 3:44 PM

6-41

Interior Comfort

Audio System

Form No. 8R29-EA-02I

When playing a cassette tape

Press the seek switch ( ), release, and it will advance to the next selection. Press the seek switch ( ), release, and it will repeat the selection being played.

When playing a CD or MD

Press the seek switch ( ) to skip to the next track. Press the seek switch ( ) to repeat the current track.

Mute Switch

Press the mute switch ( ) once to mute audio, press it again to resume audio output.

J56J_8R29_EA_02I_Edition4.book Page 41 Monday, April 21, 2003 3:44 PM

6-42

Interior Comfort

Audio System

Form No. 8R29-EA-02I

This CD player is made and tested to meet exacting safety standards. It meets FCC requirements and complies with safety performance standards of the U.S. Department of Health and Human Services.

Safety Certification

This CD player should not be adjusted or repaired by anyone except qualified service personnel. If servicing is required, contact an Authorized Mazda Dealer.

Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous laser exposure. Never operate the CD player with the top case of the unit removed.

Changes or modifications not expressly approved by Mazda may void the users authority to operate this equipment.

NOTE

For CD player section: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

CAUTION

J56J_8R29_EA_02I_Edition4.book Page 42 Monday, April 21, 2003 3:44 PM

6-43

Interior Comfort

Form No. 8R29-EA-02I

Interior Equipment

When you need a sunvisor, lower it for use in front or swing it to the side.

Vanity Mirrors

To use the vanity mirror, lower the sunvisor. If your vehicle is equipped with a vanity mirror light, it will illuminate when you pull the cover up.

Illuminated Entry System

When the switch is in the DOOR position, the overhead light and the courtesy lights come on for:

About 30 seconds after the drivers door is unlocked and the ignition key is removed.

About 15 seconds after all doors are closed.

About 15 seconds after the key is removed from the ignition with all doors closed.

The light also goes out when:

The ignition switch is turned to the ON position and all doors are closed.

The drivers door is locked.

Sunvisors

Sunvisor

Interior Lights

NOTE

If any door is left opened, the light goes out after about 5 minutes. The light turns on again when the ignition switch is turned to the ON position, or when any door is opened after all doors have been closed.

J56J_8R29_EA_02I_Edition4.book Page 43 Monday, April 21, 2003 3:44 PM

6-44

Interior Comfort

Interior Equipment

Form No. 8R29-EA-02I

Overhead Lights

Front

Center

OFF Light off

DOOR

Light on when any door is open

Light on or off when the illuminated entry system is on

DOOR OFF

With sunroof

DOOR OFF

Without sunroof

OFF Light off

DOOR

Light on when any door is open

Light on or off when the illuminated entry system is on

DOOR OFF

J56J_8R29_EA_02I_Edition4.book Page 44 Monday, April 21, 2003 3:44 PM

6-45

Interior Comfort

Interior Equipment

Form No. 8R29-EA-02I

Map Lights

The map lights are switched on or off by pressing the switches.

Courtesy Lights

Turns on when any door is open or the illuminated entry system is on.

Front (with sunroof)

Front (without sunroof)

Center

Courtesy light

J56J_8R29_EA_02I_Edition4.book Page 45 Monday, April 21, 2003 3:44 PM

6-46

Interior Comfort

Interior Equipment

Form No. 8R29-EA-02I

Information Display Functions

The information display has the following functions:

Clock

Ambient Temperature Display (Outside Temperature Display)

Climate Control Display

Audio Display

Display Dimmer Cancel Function

Information Display

SET button

CLOCK button DIMMER button

AMB button

J56J_8R29_EA_02I_Edition4.book Page 46 Monday, April 21, 2003 3:44 PM

6-47

Interior Comfort

Interior Equipment

Form No. 8R29-EA-02I

Clock

When the ignition switch is in the ACC or ON position, the time is displayed.

Time setting

1. Press the CLOCK button until a beep sounds, and "12Hr" and "24Hr" will be displayed.

2. Press the SET button to switch between "12Hr" and "24Hr" displays. The selected display will flash. To select the desired clock setting, press the CLOCK button again while the preferred setting is flashing.

3. "Hr. ADJUST" will be displayed next, and the hour portion of the display will flash. Press the SET button to set the hour, then press the CLOCK button.

4. "Min. ADJUST" will be displayed next, and the minutes portion of the display will flash. Press the SET button to set the minutes, then press the CLOCK button.

Time resetting

While the clock is displayed, press the SET button 1.5 seconds or more. When the button is released, a beep will sound and the clock will be reset as follows: (Example) 12:0112:2912:00 12:3012:591:00

NOTE

When the SET button is released, the seconds are reset to "00".

J56J_8R29_EA_02I_Edition4.book Page 47 Monday, April 21, 2003 3:44 PM

6-48

Interior Comfort

Interior Equipment

Form No. 8R29-EA-02I

Ambient Temperature Display

When the ignition switch is in the ON position, press the AMB button to display the ambient temperature.

Climate Control Display

Climate control is displayed when the climate control system is turned on (page 6-5).

Audio Display

Audio is displayed when the audio system is turned on (page 6-23).

Display Dimmer Cancel Function

When driving at night on snowy or foggy roads, or in other situations when the displays visibility is reduced due to glare from surrounding brightness, the display dimmer cancel function increases the intensity of the display illumination. The display dimmer cancel function can be used when the headlight switch is in the or position.

Press the DIMMER button to increase the intensity of the display illumination. Press the button again to return to the previous display illumination.

NOTE

The displayed ambient temperature may vary from the actual ambient temperature depending on the surrounding area and vehicle conditions.

Press the AMB button again to switch the display from ambient temperature to the temperature set for the air conditioner.

Press the AMB button 1.5 seconds or more to switch the display from Fahrenheit to Centigrade or vice versa.

J56J_8R29_EA_02I_Edition4.book Page 48 Monday, April 21, 2003 3:44 PM

6-49

Interior Comfort

Interior Equipment

Form No. 8R29-EA-02I

The ignition switch must be in the ACC or ON position.

1. Open the cover.

2. Press the lighter in and release it. When ready for use, it automatically pops out.

Lighter

Dont touch the metal part of the lighter, you may burn yourself.

Dont hold the lighter in because it will overheat.

Dont use the lighter socket for plug-in accessories such as shavers and coffee pots. They may damage it or cause electrical failure. Use only a genuine Mazda lighter or the equivalent.

If the lighter doesnt pop out within 30 seconds, remove it to prevent overheating.

CAUTION

J56J_8R29_EA_02I_Edition4.book Page 49 Monday, April 21, 2003 3:44 PM

6-50

Interior Comfort

Interior Equipment

Form No. 8R29-EA-02I

To use, open the cover.

To remove, open the cover and pull up the ashtray.

Ashtray

Dont use the ashtray for trash. You might start a fire.

CAUTION

Cup Holder

Using Cup Holder: Using a cup holder to hold hot liquids while the vehicle is moving is dangerous. If the contents spill, you could be scalded. Never use a cup holder to hold hot liquids while the vehicle is moving.

Dont Put Anything Other Than Cups or Drink-cans in Cup Holder: Putting objects other than cups or drink-cans in a cup holder is dangerous. During sudden braking or maneuvering, occupants could be hit and injured, or objects could be thrown around the vehicle, causing interference with the driver and the possibility of an accident. Only use a cup holder for cups or drink-cans.

To reduce the possibility of injury in an accident or a sudden stop, keep cup holders closed when not in use.

WARNING

CAUTION

J56J_8R29_EA_02I_Edition4.book Page 50 Monday, April 21, 2003 3:44 PM

6-51

Interior Comfort

Interior Equipment

Form No. 8R29-EA-02I

Front

To use the cup holder, open the center console by pressing the lower center part of its cover.

Rear

The rear cup holder is on the rear center armrest.

Bottle holders are on the inside of the front doors.

Bottle Holder

Dont use the bottle holders for containers without caps. The contents may spill when a front door is opened.

Bottle holder

CAUTION

J56J_8R29_EA_02I_Edition4.book Page 51 Monday, April 21, 2003 3:44 PM

6-52

Interior Comfort

Interior Equipment

Form No. 8R29-EA-02I

Overhead Console

This console box is designed to store eyeglasses or other accessories. Push and release to open.

Storage Pocket

To open, push the release catch down and pull the lid downward.

Center Box with Lid

To use, pull the knob, and the lid opens automatically.

Storage Compartments

Open Storage Boxes: Driving with the storage boxes open is dangerous. To reduce the possibility of injury in an accident or a sudden stop, keep the storage boxes closed when driving.

In hot weather, dont leave combustible materials or objects which will deform in extreme heat such as lighters and glasses in the vehicle.

WARNING

CAUTION

Knob

J56J_8R29_EA_02I_Edition4.book Page 52 Monday, April 21, 2003 3:44 PM

6-53

Interior Comfort

Interior Equipment

Form No. 8R29-EA-02I

Glove Box

To open the glove box, pull the latch toward you. Insert the primary key and turn it clockwise to lock, counterclockwise to unlock.

Center Console

To open, pull the lower release catch.

Small items can be placed in the tray of the center console lid. To open it, pull the upper release catch.

Lock

Unlock

J56J_8R29_EA_02I_Edition4.book Page 53 Monday, April 21, 2003 3:44 PM

6-54

Interior Comfort

Interior Equipment

Form No. 8R29-EA-02I

The ignition switch must be in the ACC or ON position. Only use genuine Mazda accessories or the equivalent requiring no greater than 120 W (DC12 V, 10 A).

When placing an electrical device (e.g. cellular phone) in the tray which is connected with the accessory socket, pass the plug cord through the slot in the cap.

1. Open the lid by pulling the upper release catch.

2. Remove the tray mat.

3. Using a coin, turn the cap counterclockwise (about 45 from the closed position) and remove it.

4. Open the tray by pulling the lower release catch.

Accessory Socket

To prevent accessory socket damage or electrical failure, pay attention to the following;

Dont use accessories that require more than 120 W (DC12 V, 10 A).

Dont use accessories that are not genuine Mazda accessories or the equivalent.

Close the cover when the accessory socket is not in use.

Correctly insert the plug into the accessory socket.

NOTE

To prevent discharging the battery, dont use the socket for long periods with the engine off or idling.

CAUTION

Cap slot, closed

Cap slot, opened

J56J_8R29_EA_02I_Edition4.book Page 54 Monday, April 21, 2003 3:44 PM

6-55

Interior Comfort

Interior Equipment

Form No. 8R29-EA-02I

5. Pass the plug cord through the hole of the tray and insert the plug in the socket.

6. Make sure the plug cord is running through the cap slot; reinstall the cap and turn it clockwise (about 45 to the opened position).

7. Set the plug cord into the slit of the tray mat and replace the tray mat.

Plug

Plug cord

J56J_8R29_EA_02I_Edition4.book Page 55 Monday, April 21, 2003 3:44 PM

6-56

Form No. 8R29-EA-02I

J56J_8R29_EA_02I_Edition4.book Page 56 Monday, April 21, 2003 3:44 PM

7-1

Form No. 8R29-EA-02I

7 In Case of an Emergency

Helpful information on what to do in an emergency.

Parking in an Emergency ............................................................. 7-2 Parking in an Emergency ........................................................... 7-2

Flat Tire .......................................................................................... 7-3 Spare Tire and Tool Storage ...................................................... 7-3 Changing a Flat Tire .................................................................. 7-5

Overheating ................................................................................. 7-12 Overheating ............................................................................. 7-12

Emergency Starting .................................................................... 7-14 Starting a Flooded Engine ....................................................... 7-14 Jump-Starting .......................................................................... 7-14 Push-Starting ........................................................................... 7-16

Emergency Towing ...................................................................... 7-17 Towing Description ................................................................. 7-17 Tiedown Hook ......................................................................... 7-18 Recreational Towing ................................................................ 7-18

J56J_8R29_EA_02I_Edition4.book Page 1 Monday, April 21, 2003 3:44 PM

7-2

In Case of an Emergency

Form No. 8R29-EA-02I

Parking in an Emergency

The hazard warning lights should always be used when you stop on or near a roadway.

The hazard warning lights warn other drivers that your vehicle is a traffic hazard and that they must take extreme caution when near it.

Depress the hazard warning switch and all four turn signals will flash at once.

Parking in an Emergency

NOTE

The turn signals dont work when the hazard warning lights are on.

Check local regulations about the use of hazard warning lights while the vehicle is being towed. They may forbid it.

Hazard warning flasher switch

J56J_8R29_EA_02I_Edition4.book Page 2 Monday, April 21, 2003 3:44 PM

7-3

In Case of an Emergency

Form No. 8R29-EA-02I

Flat Tire

Spare tire and tools are stored in the locations illustrated in the diagram.

Spare Tire and Tool Storage

Spare tire

Jack

Lug wrench

Conventional tire hold-down bolt

J56J_8R29_EA_02I_Edition4.book Page 3 Monday, April 21, 2003 3:44 PM

7-4

In Case of an Emergency

Flat Tire

Form No. 8R29-EA-02I

Jack

To remove the jack

1. Remove the jack container lid.

2. Turn the wing bolt counterclockwise.

To secure the jack

Perform the removal procedure in reverse.

Spare Tire

Your Mazda has a temporary spare tire. The temporary spare is lighter and smaller than a conventional tire, and is designed only for emergency use and should be used only for VERY short periods. Temporary spares should NEVER be used for long drives or extended periods.

Jack

Wing bolt

Driving with a Temporary Spare Tire on Ice or Snow: Driving with a spare tire on the front (driving) wheels on ice or snow is dangerous. Handling will be affected. You could lose control of the vehicle and have an accident. Put the spare tire on the rear axle and move a regular tire to the front.

To avoid damage to the temporary spare or to the vehicle, observe the following precautions:

Dont exceed 80 km/h (50 mph).

Avoid driving over obstacles. Also, dont drive through an automatic car wash. This tires diameter is smaller than a conventional tire, so the ground clearance is reduced about 43 mm (1.7 in).

Dont use a tire chain on this tire because it wont fit properly.

Dont use your temporary spare on any other vehicle, it has been designed only for your Mazda.

Use only one temporary spare tire on your vehicle at the same time.

WARNING

CAUTION

J56J_8R29_EA_02I_Edition4.book Page 4 Monday, April 21, 2003 3:44 PM

7-5

In Case of an Emergency

Flat Tire

Form No. 8R29-EA-02I

To remove the spare tire

1. Remove the trunk board.

2. Turn the tire hold-down bolt counterclockwise.

To secure the spare tire

Perform the removal procedure in reverse.

If you have a flat tire, drive slowly to a level spot that is well off the road and out of the way of traffic to change the tire. Stopping in traffic or on the shoulder of a busy road is dangerous.

Trunk board

Lug wrench

Changing a Flat Tire

NOTE

If the following occurs while driving, it could indicate a flat tire.

Steering becomes difficult.

The vehicle begins to vibrate excessively.

The vehicle pulls in one direction.

Jacking a Vehicle: Changing a tire is dangerous if not done properly. The vehicle can slip off the jack and seriously injure someone. Be sure to follow the directions for changing a tire, and never get under a vehicle that is supported only by a jack.

Passenger in Vehicle Supported by a Jack: Allowing someone to remain in a vehicle supported by a jack is dangerous. The occupant could cause the vehicle to fall resulting in serious injury. Never allow anyone inside a vehicle supported by a jack.

WARNING

J56J_8R29_EA_02I_Edition4.book Page 5 Monday, April 21, 2003 3:44 PM

7-6

In Case of an Emergency

Flat Tire

Form No. 8R29-EA-02I

1. Park on a level surface off the right-of- way and firmly set the parking brake.

2. Put a vehicle with an automatic transaxle in Park (P), a manual transaxle in Reverse (R) or 1, and turn off the engine.

3. Turn on the hazard warning flasher.

4. Have everyone get out of the vehicle and away from the vehicle and traffic.

5. Remove the jack, tool, and spare tire (page 7-3).

6. Block the wheel diagonally opposite the flat tire. When blocking a wheel, place a block both in front and behind the tire.

Removing a Flat Tire

1. Pry off the wheel cover with the beveled end of the lug wrench.

NOTE

Make sure the jack is well lubricated before using it.

NOTE

Force the end of the lug wrench firmly between wheel and cover, or removal will be difficult.

Align the notch on the wheel cover with the valve stem when installing it.

Damage could occur during installation if the wheel cover is not properly aligned.

Lug wrench

Wheel cover

CAUTION

Tire valve

Notch

J56J_8R29_EA_02I_Edition4.book Page 6 Monday, April 21, 2003 3:44 PM

7-7

In Case of an Emergency

Flat Tire

Form No. 8R29-EA-02I

2. Loosen the lug nuts by turning them counterclockwise one turn each, but dont remove any until the tire has been raised off the ground.

3. Place the jack under the jacking position closest to the tire being changed.

4. Insert the lug wrench into the jack.Jacking position

Incorrect Jacking Position: Attempting to jack the vehicle in positions other than those recommended in this manual is dangerous. The vehicle could slip off the jack and seriously injure or even kill someone. Use only the front and rear jacking positions recommended in this manual.

Improper Jack: Using a jack that isnt designed for your Mazda is dangerous. The vehicle could slip off the jack and seriously injure someone. Use only the jack provided with your Mazda.

Placing Objects Under the Jack: Jacking the vehicle with an object under the jack is dangerous. The jack could slip and someone could be seriously injured by the jack or the falling vehicle. Never place objects under the jack.

WARNING

J56J_8R29_EA_02I_Edition4.book Page 7 Monday, April 21, 2003 3:44 PM

7-8

In Case of an Emergency

Flat Tire

Form No. 8R29-EA-02I

5. Turn the lug wrench clockwise and raise the vehicle high enough so that the spare tire can be installed. Before removing the lug nuts, make sure your Mazda is firmly in position and that it cannot slip or move.

6. Remove the lug nuts by turning them counterclockwise; then remove the wheel.

Locking Lug Nuts

If your vehicle has optional antitheft wheel lug nuts, one on each wheel will lock the tires and you must use a special key to unlock them. This key is attached to the lug wrench and is stored with the spare tire. Register them with the lock manufacturer by filling out the card provided in the glove box and mailing it in the accompanying envelope. If you lose your key, consult an Authorized Mazda Dealer or use the lock manufacturers order form, which is with the registration card.

To remove an antitheft lug nut

1. Get the key for the locking lug nut.

2. Place it on top of the nut, and be sure to hold the key square to it. If you hold the key at an angle, you may damage both key and nut. Dont use a power impact wrench.

3. Place the lug wrench on top of the key and apply pressure. Turn the wrench counterclockwise.

To replace the nut

1. Place the key on top of the nut.

2. Place the lug wrench on top of the key, apply pressure, and turn it clockwise.

Antitheft lug nut Special key

J56J_8R29_EA_02I_Edition4.book Page 8 Monday, April 21, 2003 3:44 PM

7-9

In Case of an Emergency

Flat Tire

Form No. 8R29-EA-02I

Mounting the Spare Tire

1. Remove dirt and grime from the mounting surfaces of the wheel and hub, including the hub bolts, with a cloth.

2. Mount the spare tire.

3. Install the lug nuts with the beveled edge inward; tighten them by hand.

Removing Dirt and Grime from Wheels, Hubs and Hub Bolts: When changing or replacing a tire, not removing dirt and grime from the mounting surfaces of the wheel, hub and hub bolts is dangerous. The lug nuts could loosen while driving and cause the tire to come off, resulting in an accident. Make sure the mounting surfaces of the wheel, hub and lug nuts are clean before changing or replacing tires.

WARNING Dont apply Oil or Grease to Lug Nuts, Bolts: Applying oil or grease to lug nuts and bolts is dangerous. The lug nuts could loosen while driving and cause the tire to come off, resulting in an accident. In addition, lug nuts and bolts could be damaged if tightened more than necessary. Do not apply oil or grease to lug nuts and bolts and do not tighten the lug nuts beyond the recommended tightening torque.

WARNING

J56J_8R29_EA_02I_Edition4.book Page 9 Monday, April 21, 2003 3:44 PM

7-10

In Case of an Emergency

Flat Tire

Form No. 8R29-EA-02I

4. Turn the lug wrench counterclockwise and lower the vehicle. Use the lug wrench to tighten the nuts in the order shown.

If youre unsure of how tight the nuts should be, have them inspected at a service station.

Nut tightening torque: Nm (kgfm, ftlbf) 88118 (912, 6587)

Loose Lug Nuts: Improperly or loosely tightened lug nuts are dangerous. The wheel could wobble or come off. This could result in loss of vehicle control and cause a serious accident. Always securely and correctly tighten the lug nuts.

Metric Studs and Lug Nuts: Because the wheel studs and lug nuts on your Mazda have metric threads, using a non-metric nut is dangerous. On a metric stud, it would not secure the wheel and would damage the stud, which could cause the wheel to slip off and cause an accident. Be sure to reinstall the same nuts you removed or replace them with metric nuts of the same configuration.

Incorrect Tire Air Pressure: Driving on tires with incorrect air pressure is dangerous. Tires with incorrect pressure could affect handling and result in an accident. Dont drive with any tires that have incorrect air pressure. When you check the regular tires air pressure, check the spare tire, too.

WARNING

J56J_8R29_EA_02I_Edition4.book Page 10 Monday, April 21, 2003 3:44 PM

7-11

In Case of an Emergency

Flat Tire

Form No. 8R29-EA-02I

5. Store the damaged tire, using the conventional tire hold-down bolt supplied in the tool bag to hold it in place. Have the damaged tire repaired as soon as possible.

NOTE

To prevent the jack and tool from rattling, store them properly.

Tire clamp

Conventional tire hold-down bolt

J56J_8R29_EA_02I_Edition4.book Page 11 Monday, April 21, 2003 3:44 PM

7-12

In Case of an Emergency

Form No. 8R29-EA-02I

Overheating

If the temperature gauge indicates overheating, the vehicle loses power, or you hear a loud knocking or pinging noise, the engine is probably too hot.

If this happens:

1. Drive safely to the side of the road and park off the right-of-way.

2. Put a vehicle with an automatic transaxle in park (P), a manual transaxle in neutral. Apply the parking brake.

3. Turn off the air conditioner.

4. Check whether coolant or steam is escaping from under the hood or from the engine compartment.

If steam is coming from the engine compartment: Dont go near the front of the vehicle. Stop the engine. Then turn the ignition switch to the ON position without starting the engine. The radiator cooling fans will start to cool the engine.

If neither coolant nor steam is escaping: Open the hood and idle the engine until it cools. If this doesnt lower the temperature, stop the engine and let it cool.

Overheating

Steam from Overheated Engine: Steam from an overheated engine is dangerous. The escaping steam could seriously burn you. Open the hood ONLY after steam is no longer escaping from the engine.

WARNING

J56J_8R29_EA_02I_Edition4.book Page 12 Monday, April 21, 2003 3:44 PM

7-13

In Case of an Emergency

Overheating

Form No. 8R29-EA-02I

5. Check the coolant level. If its low, look for leaks in the radiator hoses and connections, heater hoses and connections, radiator, and water pump. If you find a leak or other damage, or if coolant is still leaking, stop the engine and call an Authorized Mazda Dealer.

If you find no problems, the engine is cool, and no leaks are obvious, carefully add coolant as required (page 8-13).

Coolant reservoir

Cooling system cap 2.3-liter engine

3.0-liter engine

Cooling system cap

Coolant reservoir

Cooling System Caps: When the engine and radiator are hot, scalding coolant and steam may shoot out under pressure and cause serious injury. Dont remove either cooling system cap when the engine and radiator are hot.

If the engine continues to overheat or frequently overheats, have the cooling system inspected. The engine could be seriously damaged unless repairs are made.

WARNING

CAUTION

J56J_8R29_EA_02I_Edition4.book Page 13 Monday, April 21, 2003 3:44 PM

7-14

In Case of an Emergency

Form No. 8R29-EA-02I

Emergency Starting

If the engine fails to start, it may be flooded (excessive fuel in the engine).

Follow this procedure:

1. Depress the accelerator all the way and hold it there.

2. Turn the ignition switch to the START position and hold it therefor up to 10 seconds. If the engine starts, release the key and accelerator immediately because the engine will suddenly rev up.

3. If the engine fails to start, crank it without using the acceleratorfor up to 10 seconds.

Jump-starting is dangerous if done incorrectly. So follow the procedure carefully. If you feel unsure about jump- starting, we strongly recommend that you have a competent service technician do the work.

Starting a Flooded Engine Jump-Starting

Battery-Related Explosion: Flames and sparks near open battery cells are dangerous. Hydrogen gas, produced during normal battery operation, could ignite and cause the battery to explode. An exploding battery can cause serious burns and injuries. Keep all flames, including cigarettes, and sparks away from open battery cells.

Low Fluid Level or Frozen Battery: Jump-starting a frozen battery or one with a low fluid level is dangerous. It may rupture or explode, causing serious injury. Dont jump-start a frozen battery or one with a low fluid level.

Use only a 12 V booster system. You can damage a 12 V starter, ignition system, and other electrical parts beyond repair with a 24 V power supply (two 12 V batteries in series or a 24 V motor generator set).

WARNING

CAUTION

J56J_8R29_EA_02I_Edition4.book Page 14 Monday, April 21, 2003 3:44 PM

7-15

In Case of an Emergency

Emergency Starting

Form No. 8R29-EA-02I

1. Make sure the booster battery is 12 V and that its negative terminal is grounded.

2. If the booster battery is in another vehicle, dont allow the vehicles to touch. Turn off the engine of the vehicle with the booster battery and all unnecessary electrical loads in both vehicles.

3. Connect the jumper cables in the exact sequence as in the illustration.

Connect one end of a cable to the positive terminal on the discharged battery (1).

Attach the other end to the positive terminal on the booster battery (2).

Connect one end of the other cable to the negative terminal of the booster battery (3).

Connect the other end to a solid, stationary, exposed metallic point (for example, the strut mounting bolt) away from the discharged battery (4).

4. Start the engine of the booster vehicle and run it a few minutes. Then start the engine of the other vehicle.

5. When finished, carefully disconnect the cables in the reverse order described in Step 3.

Booster batteryDischarged battery

Jumper cables

Connect cables in numerical order and disconnect in reverse order.

Connecting to Negative Terminal: Connecting the end of the second cable to the negative ( ) terminal of the discharged battery is dangerous. A spark could cause the gas around the battery to explode and injure someone. Connect the cable to a point away from the battery.

Connecting Jumper Cable to a Moving Part: Connecting a jumper cable near or to a moving parts (cooling fans, belts) is dangerous. The cable could get caught when the engine starts and cause serious injury. Never connect a jumper cable to or near any part that moves.

WARNING

J56J_8R29_EA_02I_Edition4.book Page 15 Monday, April 21, 2003 3:44 PM

7-16

In Case of an Emergency

Emergency Starting

Form No. 8R29-EA-02I

You cant start a vehicle with an automatic transaxle by pushing it.

Push-Starting

Towing a Vehicle to Start It: Towing a vehicle to start it is dangerous. The vehicle being towed could surge forward when its engine starts, causing the two vehicles to collide. The occupants could be injured. Never tow a vehicle to start it.

You shouldnt push-start a vehicle that has a manual transaxle. It can damage the emission control system.

WARNING

CAUTION

J56J_8R29_EA_02I_Edition4.book Page 16 Monday, April 21, 2003 3:44 PM

7-17

In Case of an Emergency

Form No. 8R29-EA-02I

Emergency Towing

We recommend that towing be done only by an Authorized Mazda Dealer or a commercial tow-truck service.

Proper lifting and towing are necessary to prevent damage to the vehicle. Government and local laws must be followed.

A towed vehicle usually should have its front wheels off the ground. If excessive damage or other conditions prevent this, use wheel dollies.

When towing with the rear wheels on the ground, release the parking brake.

Towing Description

Wheel dollies

Dont tow the vehicle pointed backward with driving wheels on the ground. This may cause internal damage to the transaxle.

Dont tow with sling-type equipment. This could damage your vehicle. Use wheel-lift or flatbed equipment.

CAUTION

CAUTION

J56J_8R29_EA_02I_Edition4.book Page 17 Monday, April 21, 2003 3:44 PM

7-18

In Case of an Emergency

Emergency Towing

Form No. 8R29-EA-02I

Tiedown Hook-Rear

An example of recreational towing is towing your vehicle behind a motorhome. When doing recreational towing refer to Towing Description (page 7-17) and Tiedown Hook (page 7-18) and carefully follow the instructions.

Tiedown Hook

Dont use the tiedown hook under the rear for towing. It is designed ONLY for tying down the vehicle when its being transported. Using it for towing will damage the bumper.

CAUTION

Recreational Towing

J56J_8R29_EA_02I_Edition4.book Page 18 Monday, April 21, 2003 3:44 PM

8-1

Form No. 8R29-EA-02I

8 Maintenance and Care

How to keep your Mazda in top condition.

Introduction ................................................................................... 8-2 Introduction ............................................................................... 8-2

Scheduled Maintenance ................................................................ 8-3 Scheduled Maintenance ............................................................. 8-3

Owner Maintenance ...................................................................... 8-7 Owner Maintenance Schedule ................................................... 8-7 Owner Maintenance Precautions ............................................... 8-8 Engine Compartment Overview ................................................ 8-9 Engine Oil ................................................................................ 8-10 Engine Coolant ........................................................................ 8-13 Brake/Clutch Fluid .................................................................. 8-15 Power Steering Fluid ............................................................... 8-17 Automatic transaxle Fluid (ATF) ............................................ 8-18 Washer Fluid ............................................................................ 8-19 Body Lubrication ..................................................................... 8-20 Air Filter .................................................................................. 8-21 Wiper Blades ........................................................................... 8-22 Battery ..................................................................................... 8-24 Tires ......................................................................................... 8-25 Light Bulbs .............................................................................. 8-29 Fuses ........................................................................................ 8-35

Appearance Care ......................................................................... 8-40 How to Minimize Environmental Paint Damage ..................... 8-40 Exterior Care ........................................................................... 8-42 Interior Care ............................................................................ 8-45

J56J_8R29_EA_02I_Edition4.book Page 1 Monday, April 21, 2003 3:44 PM

8-2

Maintenance and Care

Form No. 8R29-EA-02I

Introduction

Be extremely careful and prevent injury to yourself and others or damage to your vehicle when using this manual for inspection and maintenance.

If youre unsure about any procedure it describes, we strongly urge you to have a reliable and qualified service shop perform the work, preferably an Authorized Mazda Dealer.

Factory-trained Mazda technicians and genuine Mazda parts are best for your vehicle. Without this expertise and the parts that have been designed and made especially for your Mazda, inadequate, incomplete, and insufficient servicing may result in problems. This could lead to vehicle damage or an accident and injuries.

For expert advice and quality service, consult an Authorized Mazda Dealer.

The owner should retain evidence that proper maintenance has been performed as prescribed.

Claims against the warranty resulting from lack of maintenance, as opposed to defective materials or authorized Mazda workmanship, will not be honored.

Any auto repair shop using parts equivalent to your Mazdas original equipment may perform maintenance. But we recommend that it always be done by an Authorized Mazda Dealer using genuine Mazda parts.

Introduction

J56J_8R29_EA_02I_Edition4.book Page 2 Monday, April 21, 2003 3:44 PM

8-3

Maintenance and Care

Form No. 8R29-EA-02I

Scheduled Maintenance

Follow Schedule 1 if the vehicle is operated mainly where none of the following conditions apply. If any do apply, follow Schedule 2 (Canada and Puerto Rico residents follow Schedule 2).

Repeated short-distance driving

Driving in dusty conditions

Driving with extended use of brakes

Driving in areas where salt or other corrosive materials are being used

Driving on rough or muddy roads

Extended periods of idling or low-speed operation

Driving for long periods in cold temperatures or extremely humid climates

Scheduled Maintenance

NOTE

After the prescribed period, continue to follow the described maintenance at the recommended intervals.

J56J_8R29_EA_02I_Edition4.book Page 3 Monday, April 21, 2003 3:44 PM

8-4

Maintenance and Care

Scheduled Maintenance

Form No. 8R29-EA-02I

Schedule 1

I : Inspect and repair, clean, adjust, or replace if necessary. R: Replace L: Lubricate

ENGINE

COOLING SYSTEM

FUEL SYSTEM

IGNITION SYSTEM

CHASSIS and BODY

AIR CONDITIONER SYSTEM (if installed)

*1 According to state/provincial and federal regulations, failure to perform maintenance on these items will not void your emissions warranties. However, Mazda recommends that all maintenance services be performed at the recommended time or mileage/kilometer period to ensure long-term reliability.

Maintenance Interval (Number of months or

kilometers (miles), whichever comes first)

Months 6 12 18 24 30 36 42 48

1000 km 12 24 36 48 60 72 84 96

1000 miles 7.5 15 22.5 30 37.5 45 52.5 60

Drive belts (tension) 2.3-liter engine I 3.0-liter engine I I

Engine oil R R R R R R R R Engine oil filter R R R R R R R R

Cooling system I I

Engine coolant Replace at first 168,000km (105,000miles) or 60 months ;

after that, every 48,000km (30,000miles) or 24 months

Air filter R

Fuel lines and hoses*1 I I

Hoses and tubes for emission*1 I

Spark plugs Replace every 120,000km (75,000miles)

Brake lines, hoses and connections I I Disc brakes I I I I Steering operation and linkages I I Front suspension ball joints I I Driveshaft dust boots I I Bolts and nuts on chassis and body I I Exhaust system heat shields I I All locks and hinges L L L L L L L L

Cabin air filter Replace every 40,000km (25,000miles) or 24 months

J56J_8R29_EA_02I_Edition4.book Page 4 Monday, April 21, 2003 3:44 PM

8-5

Maintenance and Care

Scheduled Maintenance

Form No. 8R29-EA-02I

Schedule 2

I : Inspect and repair, clean, adjust, or replace if necessary. R: Replace

ENGINE

COOLING SYSTEM

FUEL SYSTEM

IGNITION SYSTEM

ELECTRICAL SYSTEM

*1 According to state/provincial and federal regulations, failure to perform maintenance on these items will not void your emissions warranties. However, Mazda recommends that all maintenance services be performed at the recommended time or mileage/kilometer period to ensure long-term reliability.

*2 If the vehicle is operated under any of the following conditions, change the spark plugs every 96,000 km(60,000 miles) or shorter. a)Repeated short-distance driving b)Extended periods of idling or low-speed operation c)Driving for long periods in cold temperatures or extremely humid climates

Maintenance Interval (Number of months or

kilometers (miles), whichever comes first)

Months 4 8 12 16 20 24 28 32 36 40 44 48

1000 km 8 16 24 32 40 48 56 64 72 80 88 96

1000 miles 5 10 15 20 25 30 35 40 45 50 55 60

Drive belts (tension) 2.3-liter engine I 3.0-liter engine I I

Engine oil Puerto Rico Replace every 5,000km (3,000miles) or 3 months Others R R R R R R R R R R R R

Engine oil filter R R R R R R R R R R R R

Cooling system I I

Engine coolant Replace at first 168,000km (105,000miles) or 60 months ;

after that, every 48,000km (30,000miles) or 24 months Engine coolant level I I I I I I I I I I I I

Air filter Puerto Rico R Others R

Fuel lines and hoses*1 I I

Hoses and tubes for emission*1 I

Spark plugs USA Replace every 96,000km (60,000miles)

Others*2 Replace every 120,000km (75,000miles)

Function of all lights I I I I I I I I I I I I

J56J_8R29_EA_02I_Edition4.book Page 5 Monday, April 21, 2003 3:44 PM

8-6

Maintenance and Care

Scheduled Maintenance

Form No. 8R29-EA-02I

I : Inspect and repair, clean, adjust, or replace if necessary. L: Lubricate

CHASSIS and BODY

AIR CONDITIONER SYSTEM (if installed)

Maintenance Interval (Number of months or

kilometers (miles), whichever comes first)

Months 4 8 12 16 20 24 28 32 36 40 44 48

1000 km 8 16 24 32 40 48 56 64 72 80 88 96

1000 miles 5 10 15 20 25 30 35 40 45 50 55 60

Brake lines, hoses and connections I I Brake and clutch fluid level I I I I I I I I I I I I Disc brakes I I I I Tire inflation pressure and tire wear I I I I I I I I I I I I Steering operation and linkages I I Power steering fluid level I I I I I I I I I I I I Front suspension ball joints I I Driveshaft dust boots I I Bolts and nuts on chassis and body I I I I Exhaust system heat shields I I All locks and hinges L L L L L L L L L L L L Washer fluid level I I I I I I I I I I I I

Cabin air filter Replace every 40,000km (25,000miles) or 24 months

J56J_8R29_EA_02I_Edition4.book Page 6 Monday, April 21, 2003 3:44 PM

8-7

Maintenance and Care

Form No. 8R29-EA-02I

Owner Maintenance

The owner or a qualified service technician should make these vehicle inspections at the indicated intervals to ensure safe and dependable operation.

Bring any problem to the attention of an Authorized Mazda Dealer or qualified service technician as soon as possible.

When Refueling

Brake and clutch fluid level (page 8-15)

Engine coolant level (page 8-13)

Engine oil level (page 8-10)

Washer fluid level (page 8-19)

At Least Monthly

Tire inflation pressures (page 8-26)

At Least Twice a Year (For Example, Every Spring and Fall)

Automatic transaxle fluid level (page 8-18)

Power steering fluid level (page 8-17)

You can do the following scheduled maintenance items if you have some mechanical ability and a few basic tools and if you closely follow the directions in this manual.

Air filter (page 8-21)

Engine coolant (page 8-13)

Engine oil (page 8-10)

Owner Maintenance Schedule

J56J_8R29_EA_02I_Edition4.book Page 7 Monday, April 21, 2003 3:44 PM

8-8

Maintenance and Care

Owner Maintenance

Form No. 8R29-EA-02I

Improper or incomplete service may result in problems. This section gives instructions only for items that are easy to perform.

As explained in the Introduction (page 8-2), several procedure can be done only by a qualified service technician with special tools.

Improper owner maintenance during the warranty period may affect warranty coverage. For details, read the separate Mazda Warranty statement provided with the vehicle. If youre unsure about any servicing or maintenance procedure, have it done by an Authorized Mazda Dealer.

There are strict environmental laws regarding the disposal of waste oil and fluids. Please dispose of your waste properly and with due regard to the environment.

We recommend that you entrust the oil and fluid changes of your vehicle to an Authorized Mazda Dealer.

Owner Maintenance Precautions

Maintenance Procedures: Performing maintenance work on a vehicle is dangerous if not done properly. You can be seriously injured while performing some maintenance procedure. If you lack sufficient knowledge and experience or the proper tools and equipment to do the work, have it done by a qualified technician.

Running the Engine: Working under the hood with the engine running is dangerous. It becomes even more dangerous when you wear jewelry or loose clothing. Either can become entangled in moving parts and result in injury. Therefore, if you must run the engine while working under the hood, make certain that you remove all jewelry (especially rings, bracelets, watches, and necklaces) and all neckties, scarves, and similar loose clothing before getting near the engine or cooling fan, with may turn on unexpectedly.

Electrical Fan and Engine Inspection: Inspecting the engine with the ignition switch in the ON position is dangerous. The cooling fan could come on unexpectedly even when the engine isnt running. You could be seriously injured by the fan. Turn the ignition switch off and remove the key from the ignition switch when you inspect the engine.

WARNING

J56J_8R29_EA_02I_Edition4.book Page 8 Monday, April 21, 2003 3:44 PM

8-9

Maintenance and Care

Owner Maintenance

Form No. 8R29-EA-02I

Engine Compartment Overview

Automatic transaxle fluid-level dipstick (only for automatic transaxle)

Cooling system cap

Power steering fluid reservoir

Windshield washer fluid reservoir

Engine oil dipstick

Engine oil-filler cap

Engine coolant reservoir

Battery

Fuse block

Air filter

Brake/Clutch fluid reservoir

Automatic transaxle fluid-level dipstick (only for automatic transaxle)

Engine oil-filler cap

Cooling system cap

Power steering fluid reservoir

Windshield washer fluid reservoir

Engine oil dipstick

Engine coolant reservoir Battery

Fuse block

Air filter

Brake/Clutch fluid reservoir

2.3-liter engine

3.0-liter engine

J56J_8R29_EA_02I_Edition4.book Page 9 Monday, April 21, 2003 3:44 PM

8-10

Maintenance and Care

Owner Maintenance

Form No. 8R29-EA-02I

Recommended Oil

Oil container labels provide important information.

The quality designation SL or ILSAC must be on the label.

Engine oil viscosity, or thickness, has an effect on fuel economy and cold-weather operation (starting and oil flow). Low-viscosity engine oils can provide improved fuel economy and cold-weather performance. But high-temperature weather conditions require higher-viscosity engine oils for satisfactory lubrication.

When choosing an oil, consider the temperature range your vehicle will operate in before the next oil change. Then select the recommended viscosity from this chart.

Energy conserving oils are recommended. A chief contribution they make to fuel economy is reducing the amount of fuel necessary to overcome engine friction.

Inspecting Engine Oil Level

1. Be sure the vehicle is on a level surface.

2. Warm up the engine to normal operating temperature.

3. Turn it off and wait 5 minutes for the oil to return to the oil pan.

4. Pull out the dipstick, wipe it clean, and reinsert it fully.

Engine Oil

FOR GASOLINE ENGINES

(ILSAC)

30 20 10 0 10 20 30 40 50

20 0 20 40 60 80 100 120

5W-20

Using oils of viscosity besides those recommended for specific temperature ranges could result in engine damage.

CAUTION

OK Full

Low

2.3-liter engine

J56J_8R29_EA_02I_Edition4.book Page 10 Monday, April 21, 2003 3:44 PM

8-11

Maintenance and Care

Owner Maintenance

Form No. 8R29-EA-02I

5. Pull it out again and examine the level. Its OK between MIN and MAX. But if its near or below MIN, add enough oil to bring the level to MAX.

6. Make sure the O-ring is positioned properly before reinserting the dipstick.

Changing Engine Oil and Filter

Change engine oil and filter according to Scheduled Maintenance (page 8-3).

Please act responsiblyprotect the environment and take used oil to a recycling facility. Ask your dealer or a service station for information.

Dont add engine oil over MAX. This may cause engine damage.

Full OK Low

3.0-liter engine

CAUTION

Handling Used Engine Oil: Continuous contact with used engine oil is dangerous. It could cause skin cancer. Always wash with soap and water immediately after changing oil and filter.

Remove any oil splatter from the exhaust manifold, the exhaust pipe and the shield. Oil left on these areas will smoke when the engine is running.

WARNING

CAUTION

J56J_8R29_EA_02I_Edition4.book Page 11 Monday, April 21, 2003 3:44 PM

8-12

Maintenance and Care

Owner Maintenance

Form No. 8R29-EA-02I

Changing engine oil 1. Warm up the engine for a few minutes and turn it off. Remove the oil-filler cap.

2. Remove the drain plug and drain the oil into a suitable container.

3. Replace the plug tightly after the oil has thoroughly drained.

4. Fill the engine with new oil to the MAX mark on the dipstick.

5. Securely replace the oil-filler cap.

6. Start the engine and inspect around the drain plug for leaks.

7. Turn it off and wait 5 minutes for the oil to return to the oil pan.

Check the oil level and fill to the MAX mark if necessary.

Oil capacity (General reference only, refer to Specifications section for capacities.)

Changing oil filter

Because you need a special tool to retighten the filter, an Authorized Mazda Dealer should do the work.

Checking or Changing Engine Oil: Hot engine oil is dangerous. If the engine has been running, the engine oil becomes very hot. You could be seriously burned. Dont check or change the engine oil when the engine is hot.

WARNING

Front

Loosen

Drain plug

Tighten 2.3-liter engine

Tighten

Loosen

Front

Drain plug

3.0-liter engine NOTE

The indicated engine oil capacities are for general reference purposes only. When adding or changing oil, verify the engine oil level with the oil dipstick.

Use only specified engine oil (page 10-3).

J56J_8R29_EA_02I_Edition4.book Page 12 Monday, April 21, 2003 3:44 PM

8-13

Maintenance and Care

Owner Maintenance

Form No. 8R29-EA-02I

Inspecting Coolant Level

Inspect the antifreeze protection and coolant level in the coolant reservoir at least once a yearat the beginning of the winter seasonand before traveling where temperatures may drop below freezing.

Inspect the condition and connections of all cooling system and heater hoses. Replace any that are swollen or deteriorated.

The coolant should be at full in the radiator and between the FULL or F and LOW or L marks on the coolant reservoir when the engine is cool.

If its at or near LOW or L, add enough coolant to the coolant reservoir to provide freezing and corrosion protection and to bring the level to FULL or F.

Do not overfill. If new coolant is required frequently, consult an Authorized Mazda Dealer.

Engine Coolant

Hot Engine: A hot engine is dangerous. If the engine has been running, parts of the engine compartment can become very hot. You could be burned. Dont inspect the coolant system or add coolant when the engine is hot.

WARNING

2.3-liter engine

Radiator coolant will damage paint. Rinse it off quickly.

3.0-liter engine

CAUTION

J56J_8R29_EA_02I_Edition4.book Page 13 Monday, April 21, 2003 3:44 PM

8-14

Maintenance and Care

Owner Maintenance

Form No. 8R29-EA-02I

Changing Coolant

Change coolant according to Scheduled Maintenance (page 8-3).

For mixture percentage:

To change coolant

1. Remove the cooling system cap.

Use only soft (demineralized) water in the coolant mixture. Water that contains minerals will cut down on the coolants effectiveness.

Dont add only water. Always add a proper coolant mixture.

The engine has aluminum parts and must be protected by an ethylene- glycol-based coolant to prevent corrosion and freezing.

DO NOT USE alcohol or methanol antifreeze. DO NOT MIX alcohol or methanol with the coolant. This could damage the cooling system.

Dont use a solution that contains more than 60 % antifreeze. This would reduce effectiveness.

Protection Volume

Antifreeze solution

Water

Above 16C (3F) 35% 65% Above 26C (15F) 45% 55% Above 40C (40F) 55% 45%

CAUTION Removing the Cooling System Cap: Removing the cooling system cap or drain plug while the engine is running or hot is dangerous. This might lead to cooling system and engine damage and could result in serious injury from escaping hot coolant or steam. Turn off the engine and wait until its cool. Even then, be very careful when removing the cap or drain plug. Wrap a thick cloth around it and slowly turn it counterclockwise to the first stop. Step back while the pressure escapes. When youre sure all the pressure is gone, press down on the cap still using a cloth turn the cap, and remove it.

WARNING

Loosen Tighten

LoosenTighten

2.3-liter engine

J56J_8R29_EA_02I_Edition4.book Page 14 Monday, April 21, 2003 3:44 PM

8-15

Maintenance and Care

Owner Maintenance

Form No. 8R29-EA-02I

2. Only when the engine is cool, remove the radiator drain plug and drain the coolant into a suitable container. Properly dispose of the used coolant.

3. Flush out the system with running water.

4. Drain the system completely. Insert and tighten the plug. Add as much ethylene-glycol-based coolant and water as necessary to provide freezing and corrosion protection.

5. In extremely cold climates, add the amount recommended in the coolant manufacturers instructions.

6. Run the engine at idle with the cooling system cap off. Slowly add additional coolant if necessary.

7. At this point, wait until the engine reaches normal operating temperature; then depress the accelerator two or three times. Add more coolant, if necessary, until the system is full.

8. Install the cooling system cap. Inspect all connections for leaks. Inspect the level in the coolant reservoir one more time.

Inspecting Brake/Clutch Fluid Level

The brakes and clutch draw fluid from the same reservoir. Inspect the fluid level in the reservoir regularly. It should be kept at MAX. The level normally drops with accumulated distance, a condition associated with wear of brake and clutch linings. If it is excessively low, have the brake/clutch system inspected by an Authorized Mazda Dealer.

Loosen

Tighten LoosenTighten

3.0-liter engine

Brake/Clutch Fluid

J56J_8R29_EA_02I_Edition4.book Page 15 Monday, April 21, 2003 3:44 PM

8-16

Maintenance and Care

Owner Maintenance

Form No. 8R29-EA-02I

Adding Brake/Clutch Fluid

If the fluid level is low, add fluid until it reaches MAX. Before adding fluid, thoroughly clean the area around the cap.

Spilled Brake Fluid: Spilled brake fluid is dangerous. If it gets in your eyes, they could be seriously injured. If this happens, immediately flush your eyes with water and get medical attention. Brake fluid spilled on a hot engine could cause a fire. Be careful not to spill brake fluid on yourselfor on the engine.

Low Brake/Clutch Fluid Levels: Low brake/clutch fluid levels are dangerous. Low levels could signal brake lining wear or a brake system leak. Your brakes could fail and cause an accident. If you find a low fluid level, have the brakes and clutch inspected.

WARNING Brake and clutch fluid will damage painted surfaces. If brake or clutch fluid does get on a painted surface, wipe it off immediately.

Using nonspecified brake and clutch fluids (page 10-3) will damage the systems. Mixing different fluids will also damage them. If the brake/clutch system frequently requires new fluid, consult an Authorized Mazda Dealer.

CAUTION

J56J_8R29_EA_02I_Edition4.book Page 16 Monday, April 21, 2003 3:44 PM

8-17

Maintenance and Care

Owner Maintenance

Form No. 8R29-EA-02I

Inspecting Power Steering Fluid Level

2.3-liter engine

Inspect the fluid level in the reservoir at each engine oil change with the engine off and cold. Add fluid if necessary; it does not require periodic changing.

The level must be kept between MIN and MAX.

Visually examine the lines and hoses for leaks and damage.

If new fluid is required frequently, consult an Authorized Mazda Dealer.

3.0-liter engine

Inspect the fluid level at each engine oil change. Add fluid if necessary; it does not require periodic changing.

The level must be kept between the H and L marks.

Visually examine the lines and hoses for leaks and damage.

1. Park on a level surface, well off the right-of-way, and set the parking brake firmly.

2. Turn off the engine and allow it to cool.

3. Remove the filler cap and attached dipstick.

4. Wipe them clean and put them back.

5. Remove again and inspect the level.

6. It must be between H and L. Add fluid if necessary.

Dont overfill. If new fluid is required frequently, consult an Authorized Mazda Dealer.

Power Steering Fluid

To avoid damage to the power steering pump, dont operate the vehicle for long periods when the power steering fluid level is low.

NOTE

Use specified power steering fluid (page 10-3).

CAUTION

High

OK Low

TightenLoosen

J56J_8R29_EA_02I_Edition4.book Page 17 Monday, April 21, 2003 3:44 PM

8-18

Maintenance and Care

Owner Maintenance

Form No. 8R29-EA-02I

Inspecting Automatic transaxle Fluid Level

The automatic transaxle fluid level should be inspected regularly. Measure it as described below.

The volume of fluid changes with the temperature. Fluid must be checked at idle without driving at normal operating temperature.

1. Park on a level surface and set the parking brake firmly.

2. Idle the engine about two minutes. Push down on the brake pedal.

3. Move the shift lever through all ranges and set it at P.

4. With the engine still idling, pull out the dipstick, wipe it clean, and put it back.

5. Pull it out again. The proper fluid level is marked on the dipstick as follows.

Fluid hot scale A

When the vehicle has been driven and the fluid is at normal operating temperature, about 65C (150F), the level must be between Full and Low.

Fluid cold scale B

When the engine has not been running and the outside temperature is about 20C (70F), the level must be between Full and Low.

Automatic transaxle Fluid (ATF)

Low fluid level causes transaxle slippage. Overfilling can cause foaming, loss of fluid, and transaxle malfunction.

Use specified fluid (page 10-3). A nonspecified fluid could result in transaxle malfunction and failure.

CAUTION

Sudden Vehicle Movement: Shifting the shift lever without first depressing the brake pedal is dangerous. The vehicle could move suddenly and cause an accident. Make sure the brake pedal is applied before shifting the shift lever.

WARNING

Full A

Low Full B

Low

Full A

Low Full B

Low

2.3-liter engine

3.0-liter engine

J56J_8R29_EA_02I_Edition4.book Page 18 Monday, April 21, 2003 3:44 PM

8-19

Maintenance and Care

Owner Maintenance

Form No. 8R29-EA-02I

Fully insert the dipstick. When adding fluid, inspect with the dipstick to make sure it doesnt pass full.

Inspecting Washer Fluid Level Use the cold scale only as a reference.

If outside temperature is lower than about 20C (70F), start the engine and inspect the fluid level after the engine reaches operating temperature.

If the vehicle has been driven for an extended period at high speeds or in city traffic in hot weather, inspect the level only after stopping the engine and allowing the fluid to cool for 30 minutes.

NOTE

Inspect the fluid on both sides of the dipstick in a well lit area for an accurate reading.

CAUTION Washer Fluid

Substitute Washer Fluid: Using radiator antifreeze as washer fluid is dangerous. If sprayed on the windshield, it will dirty the windshield, affect your visibility, and could result in an accident. Use only windshield washer fluid or plain water in the reservoir.

Using Washer Fluid Without Anti- freeze Protection in Cold Weather: Operating your vehicle in temperatures below 4 degrees C (40 degrees F) using washer fluid without anti-freeze protection is dangerous as it could cause impaired windshield vision and result in an accident. In cold weather, always use washer fluid with anti-freeze protection.

NOTE

State or local regulations may restrict the use of volatile organic compounds (VOCs), which are commonly used as anti-freeze agents in washer fluid. A washer fluid with limited VOC content should be used only if it provides adequate freeze resistance for all regions and climates in which the vehicle will be operated.

WARNING

WARNING

J56J_8R29_EA_02I_Edition4.book Page 19 Monday, April 21, 2003 3:44 PM

8-20

Maintenance and Care

Owner Maintenance

Form No. 8R29-EA-02I

Inspect fluid level in the washer fluid reservoir; add fluid if necessary.

Use plain water if washer fluid is unavailable. But use only washer fluid in cold weather to prevent it from freezing.

All moving points of the body, such as door and hood hinges and locks, should be lubricated each time the engine oil is changed. Use a nonfreezing lubricant on locks during cold weather.

Make sure the engine hoods secondary latch keeps the hood from opening when the primary latch is released.

Body Lubrication

J56J_8R29_EA_02I_Edition4.book Page 20 Monday, April 21, 2003 3:44 PM

8-21

Maintenance and Care

Owner Maintenance

Form No. 8R29-EA-02I

This air filter may be cleaned with compressed air and reused, or replaced, depending on its condition. Unless it is very dirty, simply shake it to remove foreign particles. Each time you inspect it, wipe inside the air cleaner housing with a damp cloth.

Replacing the Air Filter

1. Unfasten the clamps.

2. Tilt or lift the air filter cover and remove the filter.

Air Filter

Dont drive without an air filter. This could result in excessive engine wear.

NOTE

If the vehicle is operated in very dusty or sandy areas, replace the filter more often than recommended intervals.

CAUTION

Clamp

2.3-liter engine

Clamp

3.0-liter engine

Air filter cover

Air filter

2.3-liter engine

Air filter cover

Air filter

3.0-liter engine

J56J_8R29_EA_02I_Edition4.book Page 21 Monday, April 21, 2003 3:44 PM

8-22

Maintenance and Care

Owner Maintenance

Form No. 8R29-EA-02I

3. Wipe inside the air cleaner housing with a damp cloth.

4. Clean or replace the filter.

5. Install in the reverse order of removal.

Replace the filter according to Scheduled Maintenance (page 8-3).

Contamination of either the windshield or the blades with foreign matter can reduce wiper effectiveness. Common sources are insects, tree sap, and hot wax treatments used by some commercial car washes.

If the blades are not wiping properly, clean the window and blades with a good cleaner or mild detergent; then rinse thoroughly with clean water. Repeat if necessary.

Wiper Blades

Hot waxes applied by automatic car washes have been known to affect the cleanability of windows.

To prevent damage to the wiper blades, dont use gasoline, kerosene, paint thinner, or other solvents on or near them.

CAUTION

CAUTION

J56J_8R29_EA_02I_Edition4.book Page 22 Monday, April 21, 2003 3:44 PM

8-23

Maintenance and Care

Owner Maintenance

Form No. 8R29-EA-02I

Replacing Windshield Wiper Blades

When the wipers no longer clean well, the blades are probably worn or cracked. Replace them.

1. Raise the wiper arm and turn the blade assembly to expose the plastic locking clip. Compress the clip and slide the assembly downward; then lift it off the arm.

2. Hold the end of the rubber and pull until the tabs are free of the metal support.

3. Remove the metal stiffeners from the blade rubber and install them in new blades.

To prevent damage to the wiper arms and other components, dont move the wipers by hand.

NOTE

To prevent damage to the wiper arm blades when raising both the driver and passenger side wiper arms, raise the driver side wiper arm first. Conversely, when setting down the wiper arms, set the passenger side wiper arm down first.

CAUTION

Push

Plastic locking clip

To prevent damage to the windshield, dont let the wiper arm fall on it.

CAUTION

Pull out

Tab

Metal support

Stiffeners

J56J_8R29_EA_02I_Edition4.book Page 23 Monday, April 21, 2003 3:44 PM

8-24

Maintenance and Care

Owner Maintenance

Form No. 8R29-EA-02I

4. Carefully insert the new blade rubber. Then install the blade assembly in the reverse older of removal.

Dont bend the stiffeners. You need to use them again.

If the metal stiffeners are switched, the blades wiping efficiency could be reduced. So dont use the drivers side metal stiffeners on the passengers side, or vice versa.

Be sure to reinstall the metal stiffeners in the new blade rubber so that the curve is the same as it was in the old blade rubber.

NOTE

Install the blade so that the tabs are toward the bottom of the wiper arm.

CAUTION

Tab

Battery

Battery-Related Lead Materials: Battery posts, terminals and related accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer and reproductive harm. Wash hands after handling.

Spilled Battery Fluid: Spilled battery fluid is dangerous. Battery fluid contains SULFURIC ACID which could cause serious injuries, if it gets in your eyes or on your skin. If this happens, immediately flush your eyes with water for 15 minutes or wash your skin thoroughly and get medical attention. Be careful not to get battery fluid on yourself.

Battery-Related Explosion: Flames and sparks near open battery cells are dangerous. Hydrogen gas, produced during normal battery operation, could ignite and cause the battery to explode. An exploding battery can cause serious burns and injuries. Keep all flames, including cigarettes, and sparks away from open battery cells.

WARNING

J56J_8R29_EA_02I_Edition4.book Page 24 Monday, April 21, 2003 3:44 PM

8-25

Maintenance and Care

Owner Maintenance

Form No. 8R29-EA-02I

Battery Maintenance

To get the best service from a battery:

Keep it securely mounted.

Keep the top clean and dry.

Keep terminals and connections clean, tight, and coated with petroleum jelly or terminal grease.

Rinse off spilled electrolyte immediately with a solution of water and baking soda.

If the vehicle will not be used for an extended time, disconnect the battery cables and charge the battery every six weeks.

For reasons of proper performance, safety, and better fuel economy, always maintain recommended tire inflation pressures and stay within the recommended load limits and weight distribution.

Children and Batteries: Allowing children to play near batteries is dangerous. Battery fluid could cause serious injuries if it gets in the eyes or on the skin. Always keep batteries out of the reach of children.

WARNING Tires

Using Different Tire Types: Driving your vehicle with different types of tires is dangerous. It could cause poor handling and poor braking; leading to loss of control. Except for the limited use of the temporary spare tire, use only the same type tires (radial, bias-belted, bias-type) on all four wheels.

Using Wrong-Sized Tires: Using any other tire size than what is specified for your Mazda (page 10-5) is dangerous. It could seriously affect ride, handling, ground clearance, tire clearance, and speedometer calibration. This could cause you to have an accident. Use only tires that are the correct size specified for your Mazda.

WARNING

J56J_8R29_EA_02I_Edition4.book Page 25 Monday, April 21, 2003 3:44 PM

8-26

Maintenance and Care

Owner Maintenance

Form No. 8R29-EA-02I

Tire Inflation Pressure

Inspect all tire pressures monthly (including the spare) when the tires are cold. Maintain recommended pressures for the best ride, top handling, and minimum tire wear.

Refer to the specification charts (page 10- 5).

Incorrect Tire Inflation: Overinflation or underinflation of tires is dangerous. Adverse handling or unexpected tire failure could result in a serious accident. Always inflate the tires to the correct pressure (page 10-5).

WARNING

NOTE

Warm tires normally exceed recommended pressures. Dont release air from warm tires to adjust the pressure.

Underinflation can cause reduced fuel economy and poor sealing of the tire bead, which will deform the wheel and cause separation of tire from rim.

Overinflation can produce a harsh ride and a greater possibility of damage from road hazards. Keep your tire pressure at the correct levels. If one frequently needs inflating, have it inspected.

J56J_8R29_EA_02I_Edition4.book Page 26 Monday, April 21, 2003 3:44 PM

8-27

Maintenance and Care

Owner Maintenance

Form No. 8R29-EA-02I

Tire Rotation

To equalize tread wear, rotate the tires every 12,000 km (7,500 miles) or sooner if irregular wear develops. During rotation, inspect them for correct balance.

Also, inspect them for uneven wear and damage. Abnormal wear is usually caused by one or a combination of the following:

Incorrect tire pressure

Improper wheel alignment

Out-of-balance wheel

Severe braking

After rotation, inflate all tire pressures to specification (page 10-5) and inspect the lug nuts for tightness.

Replacing a Tire

If a tire wears evenly, a wear indicator will appear as a solid band across the tread. Replace the tire when this happens.

You should replace it before the band is across the entire tread.

Rotate unidirectional tires and radial tires that have an asymmetrical tread pattern or studs only from front to rear, not from side to side. Tire performance will be weakened if rotated from side to side.

Front

Do not include (TEMPORARY USE ONLY) spare tire in rotation.

CAUTION

Worn Tires: Driving with worn tires is dangerous. Reduced braking, steering, and traction could result in an accident. Always use tires that are in good condition.

WARNING

New tread Worn tread

Tread wear indicator

J56J_8R29_EA_02I_Edition4.book Page 27 Monday, April 21, 2003 3:44 PM

8-28

Maintenance and Care

Owner Maintenance

Form No. 8R29-EA-02I

Temporary Spare Tire

Inspect the temporary spare tire at least monthly to make sure its properly inflated and stored. The temporary spare tire is easier to handle because of its construction. It is lighter and smaller than a conventional tire and should be used only for an emergency and only for a short distance.

Use the temporary only until the conventional tire is repaired, which should be as soon as possible.

Maintain its pressure at 420 kPa (4.2 kgf/ cm2 or bar, 60 psi).

Replacing a Wheel

When replacing a wheel, make sure the new one is the same as the original factory wheel in diameter, rim width, and offset.

Proper tire balancing provides the best riding comfort and helps reduce tread wear. Out-of-balance tires can cause vibration and uneven wear, such as cupping and flat spots.

Dont use your temporary spare tire rim with a snow tire or a conventional tire. Neither will properly fit and could damage both tire and rim.

The temporary spare tire has a tread life of up to 5,000 km (3,000 miles), depending on road conditions and driving habits.

The temporary spare tire is for limited use, however, if the tread wear solid-band indicator appears, replace the tire with the same type of temporary spare (page 8-27).

CAUTION

Using a Wrong-Sized Wheel: Using a wrong-sized wheel is dangerous. Braking and handling could be affected, leading to loss of control and an accident. Always use wheels of the correct size on your vehicle.

A wrong-sized wheel may adversely affect

Tire fit

Wheel and bearing life

Ground clearance

Snow-chain clearance

Speedometer calibration

Headlight aim

Bumper height

WARNING

CAUTION

J56J_8R29_EA_02I_Edition4.book Page 28 Monday, April 21, 2003 3:44 PM

8-29

Maintenance and Care

Owner Maintenance

Form No. 8R29-EA-02I

Light Bulbs

Overhead light/Map lights

Fog lights

High-mount brake light

Trunk light

Brake lights/Taillights

Rear turn signal lights

Reverse lights

Parking lights

Front turn signal lights

Headlights(Low beam)

Headlights (High beam)

Courtesy lights

License plate lights

Side-marker lights

Taillights

J56J_8R29_EA_02I_Edition4.book Page 29 Monday, April 21, 2003 3:44 PM

8-30

Maintenance and Care

Owner Maintenance

Form No. 8R29-EA-02I

Your Mazdas headlights have replaceable halogen bulbs.

Replacing a Headlight Bulb

Due to the complexity and difficulty of the procedure, the bulbs should be replaced by an Authorized Mazda Dealer.

Handling Halogen Bulbs: When a halogen bulb breaks, it is dangerous. These bulbs contain pressurized gas. If one is broken, it will explode and serious injuries could be caused by the flying glass. If the glass portion is touched with bare hands, body oil could cause the bulb to overheat and explode when lit. Never touch the glass portion of the bulb with your bare hands and always wear eye protection when handling or working around halogen bulbs.

Children and Halogen Bulbs: Playing with a halogen bulb is dangerous. Serious injuries could be caused by dropping a halogen bulb or breaking it some other way. Always keep halogen bulbs out of the reach of children.

WARNING

Do not touch the glass surface

J56J_8R29_EA_02I_Edition4.book Page 30 Monday, April 21, 2003 3:44 PM

8-31

Maintenance and Care

Owner Maintenance

Form No. 8R29-EA-02I

Replacing a Bulb (Front)

To replace the bulbs for the fog lights and parking lights, contact an Authorized Mazda Dealer.

Front turn signal lights Side-marker lights

J56J_8R29_EA_02I_Edition4.book Page 31 Monday, April 21, 2003 3:44 PM

8-32

Maintenance and Care

Owner Maintenance

Form No. 8R29-EA-02I

Replacing a Bulb (Interior)

Without overhead console

With overhead console

Trunk lightOverhead light/Map lights

Courtesy lights

Vanity mirror lights

J56J_8R29_EA_02I_Edition4.book Page 32 Monday, April 21, 2003 3:44 PM

8-33

Maintenance and Care

Owner Maintenance

Form No. 8R29-EA-02I

Replacing a Bulb (Rear)

Rear bulb access

To replace the turn signal light, brake light/taillight or reverse light bulbs, the trunk rear trim must be removed and the inside cover must be partially opened.

1. Pull the center section of the plastic retainer and remove the retainers and the trunk rear trim.

2. Remove the inside covers plastic retainers and partially open the inside cover.

J56J_8R29_EA_02I_Edition4.book Page 33 Monday, April 21, 2003 3:44 PM

8-34

Maintenance and Care

Owner Maintenance

Form No. 8R29-EA-02I

Rear turn signal lights Brake lights/Taillights

Reverse lights Taillights

High-mount brake light

License plate lights

J56J_8R29_EA_02I_Edition4.book Page 34 Monday, April 21, 2003 3:44 PM

8-35

Maintenance and Care

Owner Maintenance

Form No. 8R29-EA-02I

Your vehicles electrical system is protected by fuses.

If any lights, accessories, or controls dont work, inspect the appropriate circuit protector. If a fuse has blown, the inside element will be melted.

If the same fuse blows again, avoid using that system and consult an Authorized Mazda Dealer as soon as possible.

Fuse Replacement

If the electrical system doesnt work, first inspect fuses on the vehicles left side.

1. Turn off the ignition switch and other switches.

2. Open the fuse panel cover.

3. Pull the fuse straight out with the fuse puller provided on the fuse block.

4. Inspect it and replace if its blown.

5. Push in a new fuse of the same rating, and make sure it fits tightly. If it doesnt, have an Authorized Mazda Dealer install it. If you have no spare fuses, borrow one of the same rating from a circuit not essential to vehicle operation, such as the SPARE circuit.

Fuses

Fuse panel cover

Fuse puller

Engine compartment fuse box

Normal Blown

J56J_8R29_EA_02I_Edition4.book Page 35 Monday, April 21, 2003 3:44 PM

8-36

Maintenance and Care

Owner Maintenance

Form No. 8R29-EA-02I

If the headlights or other electrical components dont work and the fuses in the cabin are OK, inspect the fuse block under the hood. If a fuse is blown, it must be replaced. Follow these steps:

1. Turn off the ignition switch and all other switches.

2. Remove the fuse block cover.

3. If a fuse is blown, replace it with a new one of the same rating .

Always replace a fuse with one of the same rating. Otherwise you may damage the electric system.

CAUTION

Tab

Fuse block cover

NOTE

To replace the MAIN fuse, contact an Authorized Mazda Dealer (page 8-37).

Normal Blown

J56J_8R29_EA_02I_Edition4.book Page 36 Monday, April 21, 2003 3:44 PM

8-37

Maintenance and Care

Owner Maintenance

Form No. 8R29-EA-02I

Fuse Panel Description

Fuse block (Engine compartment)

*12.3-liter engine *23.0-liter engine

DESCRIPTION FUSE RATING

PROTECTED COMPONENT

1 SPARE 20A 2 SPARE 15A 3 SPARE 10A 4 5 6 INJ 15A Injector

7 ENG BAR 10A*1 Air flow sensor,

EGR control valve15A*2

8 ENG BAR2*1 15A O2 sensor

ENG BB*2 5A Cooling fan

9 HEAD LR 10A Headlight-low beam (Right)

10 HEAD LL 10A Headlight-low beam (Left)

11 HEAD HL 10A Headlight-high beam (Left)

12 HEAD HR 10A Headlight-high beam (Right)

13 ETC 7.5A Accelerator position sensor

DESCRIPTION FUSE RATING

PROTECTED COMPONENT

14 HAZARD 10A Turn signal lights

15 STOP 15A Brake/Taillights

16 TCM*1 10A TCM

IG1*2 15A O2 sensor

17 ENG B 7.5A PCM, TCM

18 FUEL PUMP 15A Fuel pump

19 IG KEY 40A

Windshield wiper and washer, Engine control unit, Lighter

20 P.WIND 30A Power window 21 22

23 IG KEY2 30A Reverse lights, Heater control unit

J56J_8R29_EA_02I_Edition4.book Page 37 Monday, April 21, 2003 3:44 PM

8-38

Maintenance and Care

Owner Maintenance

Form No. 8R29-EA-02I

*12.3-liter engine *23.0-liter engine

DESCRIPTION FUSE RATING

PROTECTED COMPONENT

24 BLOWER 40A Blower motor

25 BTN 40A Overhead light, Power door lock

26

27 DEFOG 40A Rear window defroster

28 ABS 60A ABS

29 AD FAN*1

30A Cooling fan FAN2*2

30 FAN*1

30A Cooling fan FAN1*2

31 TAIL 10A

Brake/Taillights, License plate lights, Parking lights

32 ILLUMI 10A Dashboard illumination

33 MAG 10A Magnet clutch 34 AUDIO 15A Audio system 35 P.SEAT 30A Power seat 36 OPENER 7.5A Fuel lid opener 37 38 39 FOG 15A Fog lights

40 MAIN 100A*1 For protection of

all circuits120A*2

J56J_8R29_EA_02I_Edition4.book Page 38 Monday, April 21, 2003 3:44 PM

8-39

Maintenance and Care

Owner Maintenance

Form No. 8R29-EA-02I

Fuse block (Vehicles left side)

DESCRIPTION FUSE RATING

PROTECTED COMPONENT

1 ENGINE IG 15A Engine control system

2 METER IG 15A Instrument cluster

3 SEAT 15A Seat warmer, Rear window defroster

4 M.DEF 7.5A Mirror defroster

5 WIPER 20A Windshield wiper and washer

6 SAS 15A ABS unit, SAS unit

7 BACK 5A Reverse lights 8 A/C 15A Heater

9 METER ACC 5A Instrument cluster

10 CIGAR 15A Lighter 11 ROOM 15A Overhead light 12

13 MIRROR 5A Power control mirror, Audio system

DESCRIPTION FUSE RATING

PROTECTED COMPONENT

14 R.CIGAR 15A Accessory socket

15 16 D.LOCK 30A Power door lock 17

J56J_8R29_EA_02I_Edition4.book Page 39 Monday, April 21, 2003 3:44 PM

8-40

Maintenance and Care

Form No. 8R29-EA-02I

Appearance Care

The paintwork on your Mazda represents the latest technical developments in composition and methods of application.

Environmental hazards, however, can harm the paints protective properties, if proper care is not taken.

Here are some examples of possible damage, with tips on how to prevent them.

Etching Caused by Acid Rain or Industrial Fallout

Occurrence

Industrial pollutants and vehicle emissions drift into the air and mix with rain or dew to form acids. These acids can settle on a vehicles finish. As the water evaporates, the acid becomes concentrated and can damage the finish. And the longer the acid remains on the surface, the greater the chance is for damage.

Prevention

It is necessary to wash and wax your vehicle to preserve its finish according to the instructions in this section. These steps should be taken immediately after you suspect that acid rain has settled on your vehicles finish.

Damage Caused by Bird Dropping, Insects, or Tree Sap

Occurrence

Bird droppings contain acids. If these arent removed they can eat away the clear and color base coat of the vehicles paintwork.

When insects stick to the paint surface and decompose, corrosive compounds form. These can erode the clear and color base coat of the vehicles paintwork if they are not removed.

Tree sap will harden and adhere permanently to the paint finish. If you scratch the sap off while it is hard, some vehicle paint could come off with it.

Prevention

It is necessary to have your Mazda washed and waxed to preserve its finish according to the instructions in this section. This should be done as soon as possible.

Bird droppings can be removed with a soft sponge and water. If you are traveling and these are not available, a moistened tissue may also take care of the problem. The cleaned area should be waxed according to the instructions in this section. Insects and tree sap are best removed with a soft sponge and water or a commercially available chemical cleaner.

Another method is to cover the affected area with dampened newspaper for one to two hours. After removing the newspaper, rinse off the loosened debris with water.

How to Minimize Environmental Paint Damage

J56J_8R29_EA_02I_Edition4.book Page 40 Monday, April 21, 2003 3:44 PM

8-41

Maintenance and Care

Appearance Care

Form No. 8R29-EA-02I

Water Marks

Occurrence

Rain, fog, dew, and even tap water can contain harmful minerals such as salt and lime. If moisture containing these minerals settles on the vehicle and evaporates, the minerals will concentrate and harden to form white rings. The rings can damage your vehicles finish.

Prevention

It is necessary to wash and wax your vehicle to preserve its finish according to the instructions in this section. These steps should be taken immediately after you find water marks on your vehicles finish.

Paint Chipping

Occurrence

Paint chipping occurs when gravel thrown in the air by another vehicles tires hits your vehicle.

How to avoid paint chipping

Keeping a safe distance between you and the vehicle ahead reduces the chances of having your paint chipped by flying gravel.

NOTE

The paint chipping zone varies with the speed of the vehicle. For example, when traveling at 90 km/h (56 mph), the paint chipping zone is 50 m (164 ft).

In low temperatures a vehicles finish hardens. This increases the chance of paint chipping.

Chipped paint can lead to rust forming on your Mazda. Before this happens, repair the damage by using Mazda touch-up paint according to the instructions in this section. Failure to repair the affected area could lead to serious rusting and expensive repairs.

J56J_8R29_EA_02I_Edition4.book Page 41 Monday, April 21, 2003 3:44 PM

8-42

Maintenance and Care

Appearance Care

Form No. 8R29-EA-02I

Follow all label and container directions when using a chemical cleaner or polish. Read all warnings and cautions.

Maintaining the Finish

Washing

To help protect the finish from rust and deterioration, wash your Mazda thoroughly and frequently, at least once a month, with lukewarm or cold water.

If the vehicle is washed improperly, the paint surface could be scratched. Here are some examples of how scratching could occur.

Scratches occur on the paint surface when:

The vehicle is washed without first rinsing off dirt and other foreign matter.

The vehicle is washed with a rough, dry, or dirty cloth.

The vehicle is washed at a car wash that uses brushes that are dirty or too stiff.

Cleansers or wax containing abrasives are used.

To minimize scratches on the vehicles paint finish:

Rinse off any dirt or other foreign matter using lukewarm or cold water before washing.

Use plenty of lukewarm or cold water and a soft cloth when washing the vehicle. Do not use a nylon cloth.

Rub gently when washing or drying the vehicle.

Take your vehicle only to a car wash that keeps its brushes well maintained.

Dont use abrasive cleansers or wax that contain abrasives.

Exterior Care

NOTE

Mazda is not responsible for scratches caused by automatic car washes or improper washing.

Scratches are more noticeable on vehicles with darker paint finishes.

Dont use steel wool, abrasive cleaners, or strong detergents containing highly alkaline or caustic agents on chrome-plated or anodized aluminum parts. This may damage the protective coating; also, cleaners and detergents may discolor or deteriorate the paint.

CAUTION

J56J_8R29_EA_02I_Edition4.book Page 42 Monday, April 21, 2003 3:44 PM

8-43

Maintenance and Care

Appearance Care

Form No. 8R29-EA-02I

Pay special attention to removing salt, dirt, mud, and other foreign material from the underside of the fenders, and make sure the drain holes in the lower edges of the doors and rocker panels are clean.

Insects, tar, tree sap, bird droppings, industrial fallout, and similar deposits can damage the finish if not removed immediately. When prompt washing with plain water is ineffective, use a mild soap made for use on vehicles.

Thoroughly rinse off all soap with lukewarm or cold water. Dont allow soap to dry on the finish.

After washing the vehicle, dry it with a clean chamois to prevent water spots from forming.

Waxing

Your vehicle needs to be waxed when water no longer beads on the finish. Always wash and dry the vehicle before waxing it. In addition to the vehicle body, wax the metal trim to maintain its luster.

1. Use wax which contains no abrasives. Waxes containing abrasive will remove paint and could damage bright metal parts.

2. Use a good grade of natural wax for metallic, mica, and solid colors.

3. When waxing, coat evenly with the sponge supplied or a soft cloth.

4. Wipe off the wax with a soft cloth.

Driving with Wet Brakes: Driving with wet brakes is dangerous. Increased stopping distance or the vehicle pulling to one side when braking could result in a serious accident. Light braking will indicate whether the brakes have been affected. Dry the brakes by driving very slowly and applying the brakes lightly until brake performance is normal.

WARNING

NOTE

A spot remover to remove oil, tar, and similar materials will usually also take off the wax. Rewax these areas even if the rest of the vehicle doesnt need it.

J56J_8R29_EA_02I_Edition4.book Page 43 Monday, April 21, 2003 3:44 PM

8-44

Maintenance and Care

Appearance Care

Form No. 8R29-EA-02I

Repairing Damage to the Finish

Deep scratches or chips on the finish should be repaired promptly. Exposed metal quickly rusts and can lead to major repairs.

Bright-Metal Maintenance

Use tar remover to remove road tar and insects. Never do this with a knife or similar tool.

To prevent corrosion on bright-metal surfaces, apply wax or chrome preservative and rub it to a high luster.

During cold weather or in coastal areas, cover bright-metal parts with a coating of wax or preservative heavier than usual. It would also help to coat them with noncorrosive petroleum jelly or some other protective compound.

Underbody Maintenance

Road chemicals and salt used for ice and snow removal and solvents used for dust control may collect on the underbody. If not removed, they will speed up rusting and deterioration of such underbody parts as fuel lines, frame, floor pan, and exhaust system, even though these parts may be coated with anti-corrosive material.

Thoroughly flush the underbody and wheel housings with lukewarm or cold water at the end of each winter. Try also to do this every month.

Pay special attention to these areas because they easily hide mud and dirt. It will do more harm than good to wet down the road grime without removing it.

The lower edges of doors, rocker panels, and frame members have drain holes that should not be clogged. Water trapped there will cause rusting.

If your Mazda is damaged and needs metal parts repaired or replaced, make sure the body shop applies anti- corrosion materials to all parts, both repaired and new. This will prevent them from rusting.

Dont use steel wool, abrasive cleaners, or strong detergents containing highly alkaline or caustic agents on chrome-plated or anodized aluminum parts. This may result in damage to the protective coating and cause discoloration or paint deterioration.

CAUTION

CAUTION

Driving with Wet Brakes: Driving with wet brakes is dangerous. Increased stopping distance or the vehicle pulling to one side when braking could result in a serious accident. Light braking will indicate whether the brakes have been affected. Dry the brakes by driving very slowly and applying the brakes lightly until brake performance is normal.

WARNING

J56J_8R29_EA_02I_Edition4.book Page 44 Monday, April 21, 2003 3:44 PM

8-45

Maintenance and Care

Appearance Care

Form No. 8R29-EA-02I

Aluminum Wheel Maintenance

A protective coating is provided over the aluminum wheels. Special care is needed to protect this coating.

Dashboard Precautions

Prevent caustic solutions such as perfume and cosmetic oils from contacting the dashboard. Theyll damage and discolor it. If these solutions get on the dashboard, wipe them off immediately.

Cleaning the Upholstery and Interior Trim

Vinyl

Remove dust and loose dirt from vinyl with a whisk broom or vacuum cleaner. Clean vinyl with a leather-and-vinyl cleaner.

Leather

Real leather isnt uniform and may have scars, scratches, and wrinkles. Clean it with a leather cleaner or mild soap.

Wipe it with a damp soft cloth; then dry and buff it with a dry soft cloth.

NOTE

Dont use a wire brush or any abrasive cleaner, polishing compound, or solvent on aluminum wheels. They may damage the coating.

Only use a mild soap or neutral detergent and always use a sponge or soft cloth to clean the wheels. Rinse thoroughly with lukewarm or cold water. Also, be sure to clean the wheels after driving on dusty or salted roads. This helps prevent corrosion.

Avoid washing your vehicle in an automatic car wash that uses high- speed or hard brushes.

If your aluminum wheels lose luster, wax the wheels.

Interior Care

Do not use glazing agents. Glazing agents contain ingredients which may cause discoloration, wrinkling, cracks and peeling.

CAUTION

J56J_8R29_EA_02I_Edition4.book Page 45 Monday, April 21, 2003 3:44 PM

8-46

Maintenance and Care

Appearance Care

Form No. 8R29-EA-02I

Fabric

Remove dust and loose dirt from fabric with a whisk broom or vacuum cleaner. Clean it with a mild soap solution good for upholstery and carpets. Remove fresh spots immediately with a fabric spot cleaner.

To keep the fabric looking clean and fresh, take care of it. Otherwise its color will be affected, it can be stained easily, and its fire-resistance may be reduced.

Cleaning the Lap/Shoulder Belt Webbing

Clean the webbing with a mild soap solution recommended for upholstery or carpets. Follow instructions. Dont bleach or dye the webbing; this may weaken it.

After cleaning the belts, thoroughly dry the belt webbing and make sure there is no remaining moisture before retracting them.

Cleaning the Window Interiors

If the windows become covered with an oily, greasy, or waxy film, clean them with glass cleaner. Follow the directions on the container.

Use only recommended cleaners and procedures. Others may affect appearance and fire-resistance.

Damaged Seat Belt: Using damaged seat belts is dangerous. In a collision, damaged belts cannot provide adequate protection. Have your Authorized Mazda Dealer replace damaged belts immediately.

CAUTION

WARNING

Dont scrape or scratch the inside of the rear window. You may damage the rear window defroster grid.

When washing the inside rear window, use a soft cloth dampened in lukewarm water, gently wiping the antenna lines. Use of glass cleaning products could damage the antenna.

CAUTION

J56J_8R29_EA_02I_Edition4.book Page 46 Monday, April 21, 2003 3:44 PM

9-1

Form No. 8R29-EA-02I

9 Customer Information and Reporting Safety Defects

Important consumer information including warranties and add-on equipment.

Customer Assistance ..................................................................... 9-2 Customer Assistance (U.S.A.) ................................................... 9-2 Customer Assistance (Canada) .................................................. 9-3 Customer Assistance (Puerto Rico) ........................................... 9-6

Mazda Importer/Distributors ...................................................... 9-7 Importer/Distributor .................................................................. 9-7 Distributor in Each Area ............................................................ 9-7

Warranty ........................................................................................ 9-8 Warranties for Your Mazda ........................................................ 9-8 Outside the United States and Canada ...................................... 9-9 Registering Your Vehicle in A Foreign Country (Except United States and Canada) .................................................................. 9-10 Add-On Non-Genuine Parts and Accessories ......................... 9-11

Cell Phones ................................................................................... 9-12 Cell Phones Warning ............................................................... 9-12

Type Approval of Equipment ..................................................... 9-13 Type Approval of Equipment .................................................. 9-13

Uniform Tire Quality Grading System (UTQGS) .................... 9-14 Uniform Tire Quality Grading System (UTQGS) ................... 9-14

Reporting Safety Defects ............................................................ 9-16 Reporting Safety Defects ......................................................... 9-16

Service Publications .................................................................... 9-17 Service Publications ................................................................ 9-17

J56J_8R29_EA_02I_Edition4.book Page 1 Monday, April 21, 2003 3:44 PM

9-2

Customer Information and Reporting Safety Defects

Form No. 8R29-EA-02I

Customer Assistance

Your complete and permanent satisfaction is our business. We are here to serve you. All Authorized Mazda Dealers have the knowledge and the tools to keep your Mazda vehicle in top condition. If you have any questions or recommendations for improvement regarding the service of your Mazda vehicle or servicing by Mazda Dealer personnel, we recommend that you take the following steps:

STEP 1: Contact Your Mazda Dealer

Discuss the matter with an Authorized Mazda Dealer. This is the quickest and best way to address the issue. If your concern has not been resolved by the CUSTOMER RELATIONS, SALES, SERVICE, or PARTS MANAGER, then please contact the GENERAL MANAGER of the dealership or the OWNER.

STEP 2: Call the Mazda National Customer Assistance Center #800

If for any reason you feel the need for further assistance after contacting your dealership management, call Mazda North American Operations Customer Assistance Center toll- free at: 1 (800) 222-5500.

In order to serve you efficiently and effectively, please help us by providing the following information:

1. Your name, address, and telephone number

2. Year and model of vehicle

3. Vehicle Identification Number (17 digits, noted on your registration or title or located on the upper drivers side corner of the dash)

4. Purchase date and current mileage

5. Your dealers name and location

6. Your question(s)

If you would like to write a letter, please address it to the following: Attn: Customer Assistance

Mazda North American Operations 7755 Irvine Center Drive Irvine, CA 92618-2922 P.O. Box 19734 Irvine, CA 92623-9734

This way, we can be sure to respond to you as efficiently as possible. That is our goal. If you live outside the U.S.A., please contact your nearest Mazda Distributor.

Customer Assistance (U.S.A.)

J56J_8R29_EA_02I_Edition4.book Page 2 Monday, April 21, 2003 3:44 PM

9-3

Customer Information and Reporting Safety Defects

Customer Assistance

Form No. 8R29-EA-02I

Satisfaction Review Process

Your complete and permanent satisfaction is of primary concern to Mazda. All Authorized Mazda Dealers have both the knowledge and tools to keep your Mazda in top condition. In our experience, any questions, problems, or complaints regarding the operation of your Mazda or any other general service transactions are most effectively resolved by your dealer. If the cause of your dissatisfaction cannot adequately be addressed by normal dealership procedures, we recommend that you take the following steps:

STEP 1: Contact the Mazda Dealer

Discuss the matter with a member of dealership management. If the Service Manager has already reviewed your concerns, contact the owner of the dealership or its General Manager.

STEP 2: Contact the Mazda Regional Office

If you feel that you still require assistance, ask the dealer Service Manager to arrange for you to meet the local Mazda Service Representative. If more expedient, contact Mazda Canada Inc.Regional Office nearest you for such arrangements. Regional Office address and phone numbers are shown (page 9-5).

STEP 3: Contact the Mazda Customer Relations Department

If still not substantially satisfied, contact the Customer Relations Department, Mazda Canada Inc., 305 Milner Avenue, Suite 400 Scarborough, Ontario M1B 3V4 Canada TEL:1 (800) 263-4680. Provide the Department with the following information:

1. Your name, address and telephone number

2. Year and model of vehicle

3. Vehicle Identification Number (VIN). Refer to the "Vehicle Identification Labels" page of section 10 of this manual for the location of the VIN.

4. Purchase date

5. Present odometer reading

6. Your dealers name and location

7. The nature of your problem and/or cause of dissatisfaction

Customer Assistance (Canada)

J56J_8R29_EA_02I_Edition4.book Page 3 Monday, April 21, 2003 3:44 PM

9-4

Customer Information and Reporting Safety Defects

Customer Assistance

Form No. 8R29-EA-02I

The Department, in cooperation with the local Mazda Service Representative, will review the case to determine if everything possible has been done to ensure your satisfaction.

Please recognize that the resolution of service problems in most cases requires the use of your Mazda dealers service facilities, personnel and equipment. We urge you to follow the above three steps in sequence therefore for most effective results.

Mediation/Arbitration Program

Occasionally a customer concern cannot be resolved through Mazdas Customer Satisfaction Program. If after exhausting the procedures in this manual your concern is still not resolved, you have another option.

Mazda Canada Inc. participates in an arbitration program administered by the Canadian Motor Vehicle Arbitration Plan (CAMVAP). CAMVAP will advise you about how your concern may be reviewed and resolved by an independent third party through binding arbitration.

Your complete satisfaction is the goal of Mazda Canada Inc. and our dealers. Mazdas participation in CAMVAP makes a valuable contribution to our achieving that goal. There is no charge for using CAMVAP. CAMVAP results are fast, fair and final as the award is binding on both you and Mazda Canada Inc.

Canadian Motor Vehicle Arbitration Plan (CAMVAP)

If a specific item of concern arises, where a solution cannot be reached between an owner, Mazda, and/or one of its dealers (that all parties cannot agree upon), the owner may wish to use the services offered by the Canadian Motor Vehicle Arbitration Plan (CAMVAP).

CAMVAP uses the services of Provincial Administrators to assist consumers in scheduling and preparing for their arbitration hearings. However, before you can proceed with CAMVAP you must follow your Mazda dispute resolution process as outlined previously.

CAMVAP is fully implemented in all provinces and territories. Consumers wishing to obtain further information about the Program can obtain an information booklet from your dealer, the Provincial Administrator or the Canadian Motor Vehicle Arbitration Plan Office at the following address or telephone number.

Canadian Motor Vehicle Arbitration Office 235 Yorkland Boulevard, suite 300 North York, Ontario M2J 4Y8 1 (800) 207-0685

J56J_8R29_EA_02I_Edition4.book Page 4 Monday, April 21, 2003 3:44 PM

9-5

Customer Information and Reporting Safety Defects

Customer Assistance

Form No. 8R29-EA-02I

Regional Offices

Provincial Administrators may be reached locally as listed below:

Province/Territory CAMVAP Number British Columbia & Yukon Territories (604) 681-0312

Alberta & Northwest Territories (403) 426-0650 Saskatchewan (306) 352-9259

Manitoba (204) 942-7166 Ontario (416) 596-8824

Atlantic Canada (902) 422-5413 Quebec (418) 649-1330

REGIONAL OFFICES AREAS COVERED MAZDA CANADA INC.

WESTERN REGION 8171 ACKROYD ROAD

SUITE 2000 RICHMOND B.C.

V6X 3K1 (604) 303-5670

ALBERTA, BRITISH COLUMBIA,

MANITOBA, SASKATCHEWAN,

YUKON

MAZDA CANADA INC. CENTRAL/ATLANTIC REGION

305 MILNER AVENUE SUITE 400

SCARBOROUGH, ONTARIO M1B 3V4

1 (800) 263-4680

ONTARIO, NEW BRUNSWICK,

NOVA SCOTIA, PRINCE EDWARD ISLAND,

NEWFOUNDLAND

MAZDA CANADA INC. QUEBEC REGION

6111 ROUTE TRANS CANADIENNE

POINTE CLAIRE, QUEBEC H9R 5A5

(514) 694-6390

QUEBEC

J56J_8R29_EA_02I_Edition4.book Page 5 Monday, April 21, 2003 3:44 PM

9-6

Customer Information and Reporting Safety Defects

Customer Assistance

Form No. 8R29-EA-02I

Your complete and permanent satisfaction is our business. That is why all Authorized Mazda Dealers have the knowledge and the tools to keep your Mazda vehicle in top condition. If you have any questions or recommendations for improvement regarding the service of your Mazda vehicle or servicing by Mazda Dealer personnel, we recommend that you take the following steps:

STEP 1

Discuss the matter with an Authorized Mazda Dealer. This is the quickest and best way to address the issue. If your concern has not been resolved by the CUSTOMER RELATIONS, SALES, SERVICE, or PARTS MANAGER, then please contact the GENERAL MANAGER of the dealership or the OWNER.

STEP 2

If, after following STEP 1, you feel the need for further assistance, please contact your areas Mazda representative (Indicated on the next page).

Please help us by providing the following information:

1. Your name, address, and telephone number

2. Year and model of vehicle

3. Vehicle Identification Number (17 digits, noted on your registration or title or located on the upper drivers side corner of the dash)

4. Purchase date and current mileage

5. Your dealers name and location

6. Your question(s)

Customer Assistance (Puerto Rico)

J56J_8R29_EA_02I_Edition4.book Page 6 Monday, April 21, 2003 3:44 PM

9-7

Customer Information and Reporting Safety Defects

Form No. 8R29-EA-02I

Mazda Importer/Distributors

U.S.A.

Mazda North American Operations 7755 Irvine Center Drive Irvine, CA 92618-2922 U.S.A. P.O. Box 19734 Irvine, CA 92623-9734 U.S.A. TEL:1 (800) 222-5500 (in U.S.A.) (949) 727-1990 (outside U.S.A.)

CANADA

Mazda Canada Inc. 305 Milner Avenue, Suite 400 Scarborough, Ontario M1B 3V4 Canada TEL:1 (800) 263-4680 (in Canada) (416) 609-9909 (outside Canada)

PUERTO RICO

Plaza Motors Corp. (Mazda de Puerto Rico) P.O. Box 362722, San Juan, Puerto Rico 00936-2722 TEL: (787) 641-9300

GUAM

Triple J Motors 157 South Marine Drive, Tamuning, GUAM 96911 USA P.O. Box 6066 Tamuning, Guam 96931 TEL: (671) 649-6555

SAIPAN

Pacific International Marianas, Inc. (d.b.a. Midway Motors) P.O. Box 887 Saipan, MP 96950 TEL: (670) 234-7524

Triple J Saipan, Inc. (d.b.a. Triple J Motors) P.O. Box 500487 Saipan, MP 96950-0487 TEL: (670) 234-7133/3051

AMERICAN SAMOA

Polynesia Motors, Inc. P.O. Box 1120, Pago Pago, American Samoa 96799 TEL: (684) 699-9347

Importer/Distributor Distributor in Each Area

J56J_8R29_EA_02I_Edition4.book Page 7 Monday, April 21, 2003 3:44 PM

9-8

Customer Information and Reporting Safety Defects

Form No. 8R29-EA-02I

Warranty

New Vehicle Limited Warranty

Distributor Major Component Limited Warranty (Canada only)

Safety Restraint System Limited Warranty

Anti-perforation Limited Warranty

Federal Emission Control Warranty (U.S.A. only)

Emission Defect Warranty

Emission Performance Warranty

California Emission Control Warranty (U.S.A. only)

Emission Control Warranty (Canada only)

Replacement Parts and Accessories Limited Warranty

Tire Warranty

Warranties for Your Mazda

NOTE

Detailed warranty information is provided with your Mazda.

J56J_8R29_EA_02I_Edition4.book Page 8 Monday, April 21, 2003 3:44 PM

9-9

Customer Information and Reporting Safety Defects

Warranty

Form No. 8R29-EA-02I

Government regulations in the United States and Canada require that automobiles meet specific emission regulations and safety standards. Therefore, vehicles built for use in the United States, its territories, and Canada may differ from those sold in other countries.

The differences may make it difficult or even impossible for your vehicle to receive satisfactory servicing in other countries. We strongly recommend that you NOT take your Mazda outside these areas. You may have these problems if you do:

Recommended fuel may be unavailable. Any kind of leaded fuel or low-octane fuel will affect vehicle performance and damage the emission controls and engine.

Proper repair facilities, tools, testing equipment, and replacement parts may not be available.

The Mazda warranty applies only to Mazda vehicles registered and normally operated in the United States, its territories, and Canada.

Outside the United States and Canada

J56J_8R29_EA_02I_Edition4.book Page 9 Monday, April 21, 2003 3:44 PM

9-10

Customer Information and Reporting Safety Defects

Warranty

Form No. 8R29-EA-02I

Government regulations in your country could require that automobiles meet specific emission and safety standards. Vehicles built for your country may differ from those built for other countries. In addition to registration problems, satisfactory service may be difficult or even impossible in another country.

The fuel specified for your vehicle may be unavailable.

Parts, servicing techniques, and tools necessary to maintain and repair your vehicle may be unavailable.

There might not be an Authorized Mazda Dealer in the country you plan to take your vehicle.

The Mazda warranty is valid only in certain countries.

Registering Your Vehicle in A Foreign Country (Except United States and Canada)

J56J_8R29_EA_02I_Edition4.book Page 10 Monday, April 21, 2003 3:44 PM

9-11

Customer Information and Reporting Safety Defects

Warranty

Form No. 8R29-EA-02I

Non-genuine parts and accessories for Mazda vehicles can be found in stores. These may fit your vehicle, but they are not approved by Mazda for use with Mazda vehicles. When you install non-genuine parts or accessories, they could affect your vehicles performance or safety system; the Mazda warranty doesnt cover this. Before you install any non-genuine parts or accessories, consult an Authorized Mazda Dealer.

Mazda assumes no responsibility for death, injury, or expenses that may result from the installation of add-on non-genuine parts or accessories.

Add-On Non-Genuine Parts and Accessories

Installation of Non-Genuine Parts or Accessories: Installation of non-genuine parts or accessories is dangerous. Improperly designed parts or accessories could seriously affect your vehicles performance or safety system. This could cause you to have an accident or increase your chances of injuries in an accident. Always consult an Authorized Mazda Dealer before you install non-genuine parts or accessories.

Add-On Electrical and Electronic Equipment: Incorrectly choosing or installing improper add-on equipment or choosing an improper installer is dangerous. Essential systems could be damaged, causing engine stalling, air-bag (SRS) activation, ABS inactivation, or a fire in the vehicle. Be very careful in choosing and installing add-on electrical equipment, such as mobile telephones, two-way radios, stereo systems, and car alarm systems.

WARNING

J56J_8R29_EA_02I_Edition4.book Page 11 Monday, April 21, 2003 3:44 PM

9-12

Customer Information and Reporting Safety Defects

Form No. 8R29-EA-02I

Cell Phones

Cell Phones Warning

Use of Cell Phones and Other Devices by Driver: Use of any electrical devices such as cell phones, computers, portable radios, vehicle navigation or other devices by the driver while the vehicle is moving is dangerous. Dialing a number on a cell phone while driving also ties-up the drivers hands. Use of these devices will cause the driver to be distracted and could lead to a serious accident. If a passenger is unable to use the device, pull off the right-of-way to a safe area before use. If use of a cell phone is necessary despite this warning, use a hands-free system to at least leave the hands free to drive the vehicle. Never use a cell phone or other electrical devices while the vehicle is moving and, instead, concentrate on the full-time job of driving. Please comply to the legal regulations concerning the use of communication equipment in vehicles in your country.

WARNING

J56J_8R29_EA_02I_Edition4.book Page 12 Monday, April 21, 2003 3:44 PM

9-13

Customer Information and Reporting Safety Defects

Form No. 8R29-EA-02I

Type Approval of Equipment

Type Approval of Equipment

Immobilizer system

J56J_8R29_EA_02I_Edition4.book Page 13 Monday, April 21, 2003 3:44 PM

9-14

Customer Information and Reporting Safety Defects

Form No. 8R29-EA-02I

Uniform Tire Quality Grading System (UTQGS)

This information relates to the tire grading system developed by the U.S. National Highway Traffic Safety Administration for grading tires by tread wear, traction, and temperature performance.

Tread Wear

The tread wear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150 would wear one-and-a-half times as well on the government course as a tire graded 100.

The relative performance of tires depends upon the actual conditions of their use, however, and may depart significantly from the norm because of variations in driving habits, service practices and differences in road characteristics and climate.

Traction-AA, A, B, C

The traction grades, from highest to lowest, are AA, A, B, and C. These grades represent the tires ability to stop on wet pavement as measured under controlled conditions on specified government test surfaces of asphalt and concrete. A tire marked C may have poor traction performance.

Temperature-A, B, C

The temperature grades are A (the highest), B, and C, represent the tires resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperatures can lead to sudden tire failure.

Grade C corresponds to a level of performance which all passenger vehicle tires must meet under the Federal Motor Vehicle Safety Standard No. 109. Grades B and A represent higher levels of performance on the laboratory test wheel than the minimum required by law.

Uniform Tire Quality Grading System (UTQGS)

The traction grade assigned to this tire is based on braking (straight ahead) traction tests and does not include acceleration cornering (turning), hydroplaning, or peak traction characteristics.

WARNING

J56J_8R29_EA_02I_Edition4.book Page 14 Monday, April 21, 2003 3:44 PM

9-15

Customer Information and Reporting Safety Defects

Uniform Tire Quality Grading System (UTQGS)

Form No. 8R29-EA-02I

These grades will be added to the sidewalls of passenger vehicle tires over the next several years according to a schedule established by the NHTSA and the tire manufacturers.

The grade of tires available as standard or optional equipment on Mazda vehicle may vary with respect to grade.

ALL PASSENGER VEHICLE TIRES MUST CONFORM TO THESE GRADES AND TO ALL OTHER FEDERAL TIRE-SAFETY REQUIREMENTS.

Uniform Tire Quality Grading

Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width. For example: Treadwear 200 Traction AA Temperature A

The temperature grade for this tire is established for a tire that is properly inflated and not overloaded. Excessive speed, underinflation, or excessive loading, either separately or in combination, can cause heat buildup and possible tire failure.

WARNING

UTQGS MARK (example)

TREADWEAR 200 TRACTION AA TEMPERATURE A

J56J_8R29_EA_02I_Edition4.book Page 15 Monday, April 21, 2003 3:44 PM

9-16

Customer Information and Reporting Safety Defects

Form No. 8R29-EA-02I

Reporting Safety Defects

Reporting Safety Defects

NOTE

If you live in the U.S.A., all correspondence to Mazda Motor Corporation should be forwarded to:

Mazda North American Operations 7755, Irvine Center Drive Irvine, California 92618-2922 P.O. Box 19734 Irvine, CA 92623-9734 Customer Assistance Center or toll free at 1 (800) 222-5500

If you live outside of the U.S.A., please contact the nearest Mazda Distributor shown (page 9-7) in this booklet.

J56J_8R29_EA_02I_Edition4.book Page 16 Monday, April 21, 2003 3:44 PM

9-17

Customer Information and Reporting Safety Defects

Form No. 8R29-EA-02I

Service Publications

Factory-authorized Mazda service publications are available for owners who wish to do some of their own maintenance and repair.

When requesting any of our publications through an Authorized Mazda Dealer, refer to the chart below.

If they dont have what you need in stock, they can order it for you.

WORKSHOP MANUAL:

Covers recommended maintenance and repair procedures of the drive train, body and chassis.

WIRING DIAGRAM:

Provides electrical schematics as well as component location for the entire electrical system.

OWNERS MANUAL:

This booklet contains information regarding the proper care and operation of your vehicle. This is not a technicians manual.

Service Publications

PUBLICATION ORDER NUMBER PUBLICATION DESCRIPTION 9999-95-063B-03 2003 (U.S.A.)/2004 (Canada) WORKSHOP MANUAL (English) 9999-95-039G-03 2003 (U.S.A.)/2004 (Canada) WIRING DIAGRAM (English)

9999-95-078C-03 (U.S.A. only) 2003 OWNERS MANUAL 9999-EC-078C-03 (Canada only) 2004 OWNERS MANUAL

9999-PR-078C-03 (Puerto Rico only) 2003 OWNERS MANUAL

J56J_8R29_EA_02I_Edition4.book Page 17 Monday, April 21, 2003 3:44 PM

9-18

Form No. 8R29-EA-02I

J56J_8R29_EA_02I_Edition4.book Page 18 Monday, April 21, 2003 3:44 PM

10-1

Form No. 8R29-EA-02I

10 Specifications

Technical information about your Mazda.

Identification Numbers ............................................................... 10-2 Vehicle Information Labels ..................................................... 10-2

Specifications ............................................................................... 10-3 Specifications .......................................................................... 10-3

J56J_8R29_EA_02I_Edition4.book Page 1 Monday, April 21, 2003 3:44 PM

10-2

Form No. 8R29-EA-02I

Identification Numbers

Vehicle Identification Number

The vehicle identification number legally identifies your vehicle. The number is on a plate attached to the left top side of the dashboard. This plate can easily be seen through the windshield.

Motor Vehicle Safety Standard Label

Vehicle Emission Control Information Label

Tire Pressure Label

Engine Number (3.0-liter engine only)

Vehicle Information Labels

Front

J56J_8R29_EA_02I_Edition4.book Page 2 Monday, April 21, 2003 3:44 PM

10-3

Form No. 8R29-EA-02I

Specifications

Engine

Electrical System

Lubricant Quality

*Refer to the recommended SAE viscosity numbers on page 8-10.

Specifications

Item Model

2.3-liter engine 3.0-liter engine Type DOHC-16V in-line, 4-cylinder DOHC-24V 60V, 6-cylinder BoreStroke 87.5 94.0 mm (3.44 3.70 in) 89.0 79.5 mm (3.50 3.13 in) Displacement 2,261 ml (2,261 cc, 137.9 cu in) 2,967 ml (2,967 cc, 181.0 cu in) Compression ratio 9.7 10.0

Item Classification Battery 12V-50AH/5HR

Alternator 2.3-liter engine 12 V - 90 A 3.0-liter engine 12 V - 110 A

Starter 12 V - 1.4 kW

Spark-plug number 2.3-liter engine NGK ITR6F-13 3.0-liter engine Motorcraft AGSF 22FSCM

Spark-plug gap 2.3-liter engine 1.251.35 mm (0.0490.053 in) 3.0-liter engine 1.291.45 mm (0.0510.057 in)

Lubricant Classification

API Service ILSAC

Engine oil* SL GF-III

Lubricant Classification

Manual transmission oil 2.3-liter engine

Any temperature API Service GL-4 or GL-5 SAE 75W-90

Above 10C (50F) API Service GL-4 or GL-5 SAE 80W-90

3.0-liter engine API Service GL-4 or GL-5 SAE 75W-90

Automatic transaxle fluid ATF M-V Power steering fluid ATF M-III or equivalent (e.g. Dexron III) Brake fluid SAE J1703, or FMVSS116 DOT-3

J56J_8R29_EA_02I_Edition4.book Page 3 Monday, April 21, 2003 3:44 PM

10-4

Specifications

Form No. 8R29-EA-02I

Capacities

(Approximate Quantities)

Check oil and fluid levels with dipsticks or reservoir gauges.

Dimensions

*116 inch wheel vehicle *217 inch wheel vehicle

Weights

Air Conditioner

Item Unit

L US qt Imp qt

Engine oil

2.3-liter engine

With oil filter replacement 4.3 4.5 3.8

Without oil filter replacement

3.9 4.1 3.4

3.0-liter engine

With oil filter replacement

5.2 5.5 4.6

Without oil filter replacement

4.7 5.0 4.1

Coolant 2.3-liter engine 7.5 7.9 6.6 3.0-liter engine 10.2 10.8 9.0

Manual transaxle oil 2.3-liter engine 2.87 3.0 2.5 3.0-liter engine 2.3 2.4 2.0

Automatic transaxle fluid 2.3-liter engine 7.2 7.6 6.3 3.0-liter engine 9.2 9.7 8.1

Fuel tank 68 18.0 (US gal) 15.0 (Imp gal)

Item Model Overall length 4,745 mm (186.8 in) Overall width 1,780 mm (70.1 in) Overall height 1,440 mm (56.7 in)

Front tread 1,540mm*1(60.6in), 1,530mm*2(60.2in)

Rear tread 1,540mm*1(60.6in), 1,530mm*2(60.2in) Wheelbase 2,675 mm (105.3 in)

Item Weight GVWR (Gross Vehicle Weight Rating) 1,958 kg (4,317 lb)

GAWR (Gross Axle Weight Rating) Front 1,070 kg (2,359 lb) Rear 888 kg (1,958 lb)

Gas complies with SAE J639 Maximum operating charge HFC134a (R-134a) 0.5 kg (17.6 oz)

J56J_8R29_EA_02I_Edition4.book Page 4 Monday, April 21, 2003 3:44 PM

10-5

Specifications

Form No. 8R29-EA-02I

Light Bulbs

*1Use a 28/7W type bulb. *2Use a 21/5W type bulb.

Tires

Check the tire pressure label for tire size and inflation pressure. Refer to Tire Inflation Pressure on page 8-26.

Standard tire

Temporary spare tire

Fuses

Refer to the fuse rating on page 8-35.

Light bulb Wattage

Headlights High beam 55 Low beam 55

Front turn signal lights 28*1

Parking lights 5 Fog lights 55 Side-marker lights 5

High-mount brake lights Type A 18.4 Type B 4

Rear turn signal lights 21 Brake lights/Taillights 21/5

Taillights 5*2

Reverse lights 18.4 License plate lights 5 Trunk light 3 Overhead light/Map lights 5 Courtesy lights 5 Vanity mirror lights 1.2

Tire size Inflation pressure

Front Rear P205/60R16 91H

220 kPa (2.2 kgf/cm2, 32 psi or lb/po2) 220 kPa (2.2 kgf/cm2, 32 psi or lb/po2)P215/50 R17 93V

Tire size Inflation pressure T115/70R15 420 kPa (60 psi)

J56J_8R29_EA_02I_Edition4.book Page 5 Monday, April 21, 2003 3:44 PM

10-6

Form No. 8R29-EA-02I

J56J_8R29_EA_02I_Edition4.book Page 6 Monday, April 21, 2003 3:44 PM

11-1

Form No. 8R29-EA-02I

11 Index

J56J_8R29_EA_02I_Edition4.book Page 1 Monday, April 21, 2003 3:44 PM

11-2

Form No. 8R29-EA-02I

Index

A

Accessory Socket ............................. 6-54 Add-On Non-Genuine Parts and Accessories ...................................... 9-11 Air Bag Systems .............................. 2-33 Air Filter .......................................... 8-21 Ambient Temperature Display ........ 6-48 Antenna ............................................ 6-16 Anti-Lock Brake System (ABS) ........ 5-7

Warning light .............................. 5-8 Appearance Care .............................. 8-40 Ashtray ............................................. 6-50 Audio

Audio control switch ................ 6-40 Audio System ................................... 6-16

Audio set ................................... 6-23 Operating tips for audio system ....................................... 6-16 Safety certification .................... 6-42

Automatic Transaxle Driving tips ............................... 5-16 Fluid .......................................... 8-18 Indicators .................................. 5-12 Manual shift mode .................... 5-12 Recommendations for shifting ...................................... 5-15 Shifting ..................................... 5-13 Shifting specification ................ 5-14 Shift-lock system ...................... 5-12 Transaxle ranges ....................... 5-11

B

Battery Emergency starting ................... 7-14 Maintenance ............................. 8-24 Specifications ........................... 10-3

B

Beeps Ignition key reminder ................5-36 Lights-on reminder ...................5-36

Before Starting the Engine .................4-5 After getting in ............................4-5 Before getting in .........................4-5

Body Lubrication .............................8-20 Bottle Holder ....................................6-51 Brake/Clutch

Fluid ..........................................8-15 Brakes

Anti-lock brake system (ABS) ....5-7 Foot brake ...................................5-4 Pad wear indicator ......................5-8 Parking brake ..............................5-5 Warning light ..............................5-6

Break-In .............................................4-6 Bulb Replacement ............................8-29

C

Capacities .........................................10-4 Carbon Monoxide ..............................4-4 Catalytic Converter ............................4-3 Cell Phones ......................................9-12 Center Box .......................................6-52 Center Console .................................6-53 Child Restraint

Child restraint precautions ........2-21 Installing child-restraint systems ......................................2-24 LATCH child-restraint systems ......................................2-29

Child Safety Locks for Rear Door .....3-9 Cigarette Lighter ..............................6-49 Climate Control System .....................6-2

Gas specifications .....................10-4 Clock ................................................6-47

J56J_8R29_EA_02I_Edition4.book Page 2 Monday, April 21, 2003 3:44 PM

11-3

Index

Form No. 8R29-EA-02I

C

Courtesy Lights ................................6-45 Cruise Control ..................................5-17 Cup Holder .......................................6-50 Customer Assistance ..........................9-2

D

Dashboard Illumination ...................5-26 Daytime Running Lights ..................5-38 Defroster

Rear window .............................5-41 Dimensions ......................................10-4 Door Locks .........................................3-7 Driving In Flooded Area ....................4-9 Driving Tips .......................................4-6

Automatic transaxle ..................5-16 Break-in ......................................4-6 Driving in flooded area ...............4-9 Hazardous driving .......................4-7 Money-saving suggestions ..........4-6 Rocking the vehicle ....................4-7 Winter driving .............................4-8

E

Emergency Starting ..........................7-14 Flooded engine ..........................7-14 Jump-starting ............................7-14 Push-starting .............................7-16

Emergency Towing ..........................7-17 Emission Control System ...................4-3 Engine

Coolant ......................................8-13 Exhaust gas .................................4-4 Hood release .............................3-17 Oil .............................................8-10 Overheating ...............................7-12 Starting ........................................5-3

E

Engine Compartment Overview .........8-9 Engine Coolant

Overheating ...............................7-12 Engine Coolant Temperature Gauge ...............................................5-25 Exhaust Gas ........................................4-4 Exterior Care ....................................8-42

F

Flasher Hazard warning .........................5-42 Headlights .................................5-37

Flat Tire ..............................................7-3 Changing .....................................7-5 Spare tire and tool storage ...........7-3

Fluids Classification .............................10-3 Owner maintenance .....................8-7

Fog Lights ........................................5-39 Foot Brake ..........................................5-4 Front seats ..........................................2-2 Fuel

Filler lid and cap .......................3-16 Gauge ........................................5-26 Requirements ..............................4-2 Tank capacity ............................10-4

Fuses .................................................8-35 Panel description .......................8-37 Replacement ..............................8-35

G

Gauges ..............................................5-23 Glove Box ........................................6-53

J56J_8R29_EA_02I_Edition4.book Page 3 Monday, April 21, 2003 3:44 PM

11-4

Index

Form No. 8R29-EA-02I

H

Hazard Warning Flasher .................. 5-42 Hazardous Driving ............................. 4-7 Headlights

Control ...................................... 5-37 Flashing .................................... 5-37 High-low beam ......................... 5-37 On reminder .............................. 5-37

HomeLink Wireless Control System .............................................. 5-43 Hood Release ................................... 3-17 Horn ................................................. 5-42

I

Ignition Keys ............................................ 3-2 Switch ......................................... 5-2

Illuminated Entry System ................ 6-43 Immobilizer System ......................... 3-20 Indicator Lights ................................ 5-27

Cruise Main .............................. 5-36 Cruise set .................................. 5-36 Headlight high-beam ................ 5-34 Security ..................................... 5-33 Shift position ............................ 5-34 TCS ........................................... 5-35 TCS OFF .................................. 5-35

Information Display ......................... 6-46 Ambient temperature display ... 6-48 Audio display ............................ 6-48 Climate control display ............. 6-48 Clock ......................................... 6-47 Display dimmer cancel function ..................................... 6-48 Information display functions ... 6-46

Instrument Cluster ........................... 5-23 Instrument Cluster Dimmer Select Button .............................................. 5-26

I

Interior Care .....................................8-45 Interior Lights ..................................6-43

J

Jump-Starting ...................................7-14

K

Keyless Entry System ........................3-3 Keys ...................................................3-2

L

Label Information ............................10-2 Lane-Change Signals .......................5-38 Light Bulbs

Replacement ..............................8-29 Specifications ............................10-5

Lighter ..............................................6-49 Lighting Control ...............................5-37 Lubricant Quality .............................10-3

M

Maintenance Introduction .................................8-2 Owner maintenance precautions ..................................8-8 Owner maintenance schedule .....8-7 Scheduled ....................................8-3

Manual Transaxle Operation ..............5-9 Recommendations for shifting ....5-9

Map Lights .......................................6-45 Meters and Gauges ...........................5-23

J56J_8R29_EA_02I_Edition4.book Page 4 Monday, April 21, 2003 3:44 PM

11-5

Index

Form No. 8R29-EA-02I

M

Mirrors Outside mirrors .........................3-25 Rearview mirror ........................3-26

Money-Saving Suggestions ...............4-6

O

Odometer and Trip Meter ................5-24 Outside Mirrors ................................3-25 Overhead Console ............................6-52 Overhead Lights ...............................6-44 Overheating ......................................7-12 Overloading ........................................4-9

P

Paint Damage ...................................8-40 Parking Brake .....................................5-5 Parking in an Emergency ...................7-2 Power Door Locks .............................3-9 Power Steering .................................5-16

Fluid ..........................................8-17 Power Windows ...............................3-14 Push-Starting ....................................7-16

R

Rear Door Child Safety Locks ...........3-9 Rear Seat ............................................2-7 Rear Window Defroster ...................5-41 Rearview Mirror ...............................3-26 Recreational Towing ........................7-18 Registering Your Vehicle in A Foreign Country ...........................9-10 Rocking the Vehicle ...........................4-7

S

Safety Defects, Reporting ................9-16 Seat Belt System

3-point type ...............................2-13 Automatic locking .....................2-12 Emergency locking ...................2-12 Extender ....................................2-19 Pregnant women ........................2-12 Pretensioner and load limiting ......................................2-15 Rear-center lap/shoulder ...........2-17 Seat belt precautions .................2-10 Warning light ............................2-20

Seats Front seat .....................................2-2 Rear seat ......................................2-7

Security System Immobilizer system ...................3-20 Theft-deterrent system ..............3-22

Service Publications .........................9-17 Spare Tire and Tool Storage ...............7-3 Specifications ...................................10-3 Speedometer .....................................5-24 SRS Air Bags

Air bag system description ........2-38 Supplemental restraint systems precautions ................................2-33 Warning light ............................2-44

Starting the Engine .............................5-3 Steering Wheel .................................3-25

Horn ..........................................5-42 Storage Compartments .....................6-52

Center box .................................6-52 Center console ...........................6-53 Glove box ..................................6-53 Overhead console ......................6-52 Storage pocket ...........................6-52

Storage Pocket ..................................6-52

J56J_8R29_EA_02I_Edition4.book Page 5 Monday, April 21, 2003 3:44 PM

11-6

Index

Form No. 8R29-EA-02I

S

Sunroof ............................................ 3-18 Sunshade .......................................... 3-19 Sunvisors .......................................... 6-43

T

Tachometer ...................................... 5-25 Temporary Spare Tire ...................... 8-28 Theft-Deterrent System ................... 3-22 Tiedown

Hook ......................................... 7-18 Tires

Flat tire ........................................ 7-3 Inflation pressure ...................... 8-26 Replacement ............................. 8-27 Rotation .................................... 8-27 Snow tires ................................... 4-8 Spare tire and tool storage .......... 7-3 Specifications ........................... 10-5 Tire chains .................................. 4-8 Uniform tire quality grading system (UTQGS) ...................... 9-14

Tool .................................................... 7-3 Towing

Description ............................... 7-17 Emergency towing .................... 7-17 Recreational towing .................. 7-18 Trailer towing ........................... 4-10

Traction Control System (TCS) ....... 5-20 TCS indicator light ................... 5-21 TCS OFF indicator light ........... 5-21 TCS OFF switch ....................... 5-22

Trailer Towing ................................. 4-10 Trip Meter ........................................ 5-24 Trunk Lid ......................................... 3-10 Trunk Light ...................................... 3-12 Trunk Release lever ......................... 3-12 Turn and Lane-Change Signals ....... 5-38

V

Vanity Mirrors ..................................6-43 Vehicle Information Labels .............10-2

W

Warning Lights ................................5-27 ABS ...........................................5-31 Air bag system ..........................5-32 Automatic transaxle ..................5-33 Brake system .............................5-29 Charging system .......................5-30 Check engine .............................5-31 Door-ajar ...................................5-33 Engine oil pressure ....................5-30 Front seat belt pretensioner system .......................................5-32 Low fuel ....................................5-32 Low washer fluid level .............5-33 Seat belt .....................................5-32

Warranty .............................................9-8 Washer Fluid ....................................8-19 Weights ............................................10-4 Wheel Replacement .........................8-28 Windows

Power windows .........................3-14 Windshield Washer ..........................5-40 Windshield Wipers ...........................5-40

Blades re

Manualsnet FAQs

If you want to find out how the Mazda 6 Mazda works, you can view and download the Mazda 6 2003 Owner's Manual on the Manualsnet website.

Yes, we have the Owner's Manual for Mazda Mazda 6 as well as other Mazda manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Owner's Manual should include all the details that are needed to use a Mazda Mazda 6. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Mazda 6 2003 Owner's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Mazda 6 2003 Owner's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Mazda 6 2003 Owner's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Mazda 6 2003 Owner's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Mazda 6 2003 Owner's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.