Mazda 3 Hatchback 2020 Connected Services Manual PDF

1 of 84
1 of 84

Summary of Content for Mazda 3 Hatchback 2020 Connected Services Manual PDF

ii

1. Introduction 1-1.Important Information ............................................................ 2

About This Manual ...........................................................................2 1-2. What You Can Do With Connected Service ............................... 5

Automatic 911 dialing ......................................................................5 Malfunction Notification ..................................................................6 Remote Control ...............................................................................7 Vehicle Monitoring and Alerts ...........................................................8 Vehicle Finder ..................................................................................9 Send to Car ...................................................................................10 in-car Wi-Fi ...................................................................................11 Online Update ...............................................................................12

2. About Connected Service 2-1. Installing MyMazda APP ....................................................... 14

Operation Environment of the Application .......................................14 Installation and Launch of the Application .......................................14 Launching the Application ..............................................................14 About the Use of Guest Mode ........................................................16

2-2. Registering User Information................................................. 17 System Login ..................................................................................20

2-3. Registering Vehicle Information ............................................. 22 2-4. Changing Registered Information .......................................... 27

Changing Your Profile .....................................................................27 Changing Vehicle Information .........................................................28 Registering a Second Driver ............................................................29 Changing/Deleting a Second Driver ................................................32 Changing Your Preferred Dealer ......................................................33

3. Using Connected Service 3-1. Using Vehicle Malfunction Notification ................................. 37 3-2. Using Remote Control ........................................................ 40 3-3. Using Vehicle Monitor and Alert .......................................... 44 3-4. Using Vehicle Finder ........................................................... 49 3-5. Using Send to Car .............................................................. 50 3-6. Using In-Car Wi-Fi ............................................................. 54 3-7. Using Online Update .......................................................... 56 3-8. Using the Menus of the MyMazda APP ................................. 58

INBOX ..........................................................................................58 PROFILE ........................................................................................60 MYMAZDA ...................................................................................60 ROADSIDE ASSISTANCE .................................................................64 SUPPORT ......................................................................................64 SETTINGS ......................................................................................66

3-9. Using the MyMazda APP Main Navigation Menu ................... 67 REMOTE ........................................................................................67 STATUS .........................................................................................67 SERVICE ........................................................................................68 HELP .............................................................................................68 SEARCH ........................................................................................69

3-10. Using the MyMazda APP MAP ............................................. 71

4. Other Information 4-1. If You Are Experiencing Trouble ............................................ 74 4-2. Ending Use of Connected Service .......................................... 76 4-3. When Parting With Your Vehicle ........................................... 80 4-4. Terms of Service ................................................................. 81

MyMazdaApp_US.indb 2 2019/09/23 11:07:02

MyMazdaApp_US.indb 3 2019/09/23 11:07:02

1

1. Introduction

MyMazdaApp_US.indb 1 2019/09/23 11:07:02

2

1-1. Important Information

About This Manual This manual is a compilation of important user information, methods of use, and the initial settings and registration required in conjunction with starting the use of Connected Service. Regarding details on operations, setting methods, and precautions, refer to the owners manual, navigation system owners manual, and other types of manuals.

The following WARNING, CAUTION, and NOTE labels indicate items you must always take heed of and items you need to be aware of upon use of the service. Please verify the information in this manual before using the service.

If you do not heed the information indicated in a WARNING, the service may not operate correctly which could lead to unfavorable consequences for you.

The information in a CAUTION describes items you need to be careful of upon use of the service, such as preconditions for use of the service and the limitations of its use.

A NOTE describes information which can make use of the service more convenient by having knowledge of it.

When displayed in your vehicle, the icon below indicates the following:

Describes detailed information in this manual.

For accessories installed by an Authorized Mazda Dealer, refer to the manual included with the accessory.

Refer to the separate maintenance note for warranties and inspection details and maintenance points.

Operable functions for Connected Service differ depending on the registered vehicle. The information in this manual is for a vehicle subscribed and connected to Connected Service. Consult an Authorized Mazda Dealer for details.

Some of the information in this manual may not match your vehicle or application depending on specification changes of your vehicle or MyMazda APP.

The graphic images in this manual differ depending on the registered vehicle. For the purposes of safety, the driver should refrain from operating the system while

driving.

MyMazdaApp_US.indb 2 2019/09/23 11:07:03

3

Privacy Mazda maintains a Privacy Statement which describes how we collect, use, share, store and secure data from your vehicle equipped with Connected Service. We provide you with Connected Service by collecting and using your personal information and vehicle location, health and driving data. To learn more about our Privacy Statement, please visit: https://www.mazdausa.com/ site/privacy-connectedservices

System Limitations The location of the vehicle, particularly in remote locations, such as near mountain ranges, hills, or buildings, or enclosed areas, such as tunnels or underground parking garages, may affect the services provided. It also may not be possible to use certain functions during a Mazda Connect online update. For details on the systems limitations, refer to the Terms and Conditions at http://www. mazdausa.com/site/terms-of-use-connectedservices.

Connected Service is a service achieved through a communication network, therefore the vehicle is equipped with a dedicated communication unit. The communication unit conforms to radio wave laws and telecommunications business law

standards, and transmits with the Connected Service system using the mobile phone network. Disassembly or modification of the communication unit may be punishable by law.

If the communication unit in the vehicle has difficulty receiving mobile phone network radio waves, Connected Service may not function normally or instructed commands may not be executed.

The communication unit equipped on your vehicle uses free software/open source software. Both or either one of the used free/open source software licensing information and source code is available at the following URL: https://www.denso-ten.com/support/source/oem/najptcu/

The communication unit for Connected Service equipped on the vehicle may perform a NAD (Network Accessible Device) online update via the communication carrier. This update rarely happens, but takes approximately 3 minutes after the vehicle's engine has been turned off for 30 minutes and occurs between 3 oclock and 5 oclock in the morning. During this update, a part of the functions such as Remote Control are unusable.

MyMazdaApp_US.indb 3 2019/09/23 11:07:03

4

Use the radio wave reception level indications of the communication unit as follows:

Level Indication Explanation

Out of service

area

Radio waves are not being received. Move to a location with good radio wave reception.

Weak The radio wave reception level is weak

Strong Good reception.

The following indication conditions indicate that communication is not operating normally:

Other

Currently conducting an operation check of the communication unit. If this condition continues, consult an Authorized Mazda Dealer.

The communication unit is unsubscribed. A Connected Service contract has been ended.

Please comply with the legal regulations concerning the use of communication equipment in vehicles in your country: Use of any electrical devices such as cell phones, computers, portable radios, vehicle navigation or other devices by the driver while the vehicle is moving is dangerous. Use of these devices will cause the driver to be distracted and could lead to a serious accident. If a passenger is unable to use the device, pull off the right-of-way to a safe area before use. Never use a cell phone or other electrical devices while the vehicle is moving and, instead, concentrate on the full-time job of driving.

1-1. Important Information (Continued)

MyMazdaApp_US.indb 4 2019/09/23 11:07:03

5

1-2. What You Can Do With Connected Service

Automatic 911 dialing

If the vehicle is involved in a moderate to severe collision, a call is made automatically to 911 using the connected device. The Emergency Assistance Call setting must be on. Refer to Mazda Connect Owner's Manual.

Though the system can be set to not call 911, doing so will defeat the purpose of the system. Mazda recommends that the automatic 911 dialing system remain activated.

Automatic 911 dialing is a secondary function of the MAZDA CONNECT system. Therefore, the automatic 911 dialing function does not assure that the call will always be made to 911 after an accident occurs.

Before setting this feature on, please make sure that you read our Privacy Statement.

The Automatic 911 dialing service is available even if you are not subscribed to Connected Service. For details, refer to the Mazda Connect Owners Manual.

MyMazdaApp_US.indb 5 2019/09/23 11:07:04

6

1-2. What You Can Do With Connected Service (Continued)

Malfunction Notification

The system receives information from the vehicle in the unlikely event of a vehicle malfunction and customer support is provided. Information about the malfunction can be checked from the vehicle or the MyMazda App. A dealer or roadside assistance can be contacted at the MyMazda APP malfunction check screen. When contacting a dealer to discuss repairs, the dealer can verify the vehicle malfunction from the system. A technician can provide an explanation of the malfunction and provide guidance based on the condition of the vehicle without any information from the driver. Position information is sent automatically to roadside assistance when contacting them through the MyMazda APP, eliminating the need for the driver to describe their location. 3-1. Using Vehicle Malfunction Notification

MyMazdaApp_US.indb 6 2019/09/23 11:07:05

7

Remote Control

The vehicle can be operated remotely from a device using the MyMazda APP.

Remote Engine Start / Remote Engine Stop To ensure that the cabin is comfortable before getting into the vehicle, the engine can be started with the same set climate control temperature as when the engine was previously turned off. This is useful when the weather is extremely cold or extremely hot.

Remote Door Lock / Remote Door Unlock If the driver forgets to lock the vehicle doors, they can be locked using the MyMazda APP without having to return to the vehicle. The doors can also be unlocked for passengers near the vehicle who do not have a key. A Vehicle Status Alert function can be set to notify the driver if they have forgotten to lock the doors.

Remote Hazard Light The hazard lights can be turned on at a fixed time remotely to locate the vehicle at night. They can also be turned off remotely to prevent draining the battery if they are left on. A Vehicle Status Alert function can be set to notify the driver if the hazard lights are left on. 3-2. Using Remote Control

MyMazdaApp_US.indb 7 2019/09/23 11:07:05

8

1-2. What You Can Do With Connected Service (Continued)

Using Vehicle Monitor and Alert

The status of certain features on the vehicle can be checked with the MyMazda APP. Furthermore, the MyMazda APP is notified when conditions presumed to be user oversight, such as forgetting to lock the vehicle doors, are detected.

Vehicle Health Report Vehicle maintenance related information such as engine oil or tire pressure can be checked using the MyMazda APP and the App can be set to notify the customer when set maintenance schedules are approaching. The Vehicle Health Report information can also be accessed by dealers or the Customer Experience Center via the Connected Service system, ensuring maintenance discussions are accurate.

Vehicle Status Information such as the amount of fuel remaining can be checked using the MyMazda APP to properly prepare for long trips.

Vehicle Status Alert The MyMazda APP is notified if vehicle conditions considered to be user oversight are detected, such as forgetting to lock the doors or forgetting to turn off the hazard warning lights. MyMazda APP is notified of the following items: Doors, hood, trunk, or liftgate left open/unlocked and hazard warning lights left turned on Concerning the doors left unlocked and the hazard warning lights left turned on, you can use the Remote Control to remotely operate them. 3-3. Using Vehicle Monitor and Alert/Vehicle Status Alert

MyMazdaApp_US.indb 8 2019/09/23 11:07:05

9

Vehicle Finder

The driver can use the MyMazda APP to locate the vehicle if he or she forgets where it is parked in a large parking lot. It can also be used to identify the vehicle location if the vehicle is suspected of being stolen. If you are searching for your vehicle in a distant location where it is not visible, the location can be identified on a map screen. As the driver approaches the vehicle location, he or she can then find it by flashing the hazard warning lights. 3-4. Using Vehicle Finder

MyMazdaApp_US.indb 9 2019/09/23 11:07:06

10

1-2. What You Can Do With Connected Service (Continued)

Send to Car

Before getting into the vehicle, a search for information can be carried out on a destination where navigation guidance is required using the MyMazda APP. This can then be sent to the vehicle as a destination. Multiple destinations can be sent and the destination and places along the route can be sent all at once. When the driver gets into the vehicle and starts the engine, the destination information is sent to the vehicle and the trip can begin immediately by setting the route on the center display. 3-5. Using Send to Car

To use the navigation system, the SD card containing the map information needs to be inserted in the SD card slot.

MyMazdaApp_US.indb 10 2019/09/23 11:07:06

11

in-car Wi-Fi

The vehicle is equipped with an in-car Wi-Fi which functions as a Wi-Fi hotspot. The in-car Wi-Fi function can be used immediately by setting access points on Wi-Fi devices such as a smartphone. 3-6. Using In-Car Wi-Fi

Services are available via Verizon and any applicable free trials and monthly subscriptions for the customer will be done directly with Verizon.

MyMazdaApp_US.indb 11 2019/09/23 11:07:07

12

Online Update

Online Update now supports updating of the MAZDA CONNECT system. An update notification will be displayed on the center display when the latest software version is available, and the update can be carried out at the customer's convenience from the notification. 3-7. Using Online Update

MyMazdaApp_US.indb 12 2019/09/23 11:07:07

13

2. About Connected Service

MyMazdaApp_US.indb 13 2019/09/23 11:07:07

14

2-1. Installing the MyMazda APP

Operation Environment of the Application

Compatible OS OS Version

Android 8.0 or higher

iOS 11.0 or higher

Installation and Launch of the Application Install the application according to the type of mobile device you are using from the download site such as Google Play or the iTunes App Store.

iOS device user

Android device user

Launching the Application Launch the MyMazda APP and touch the icon.

* Google Play and the Google Play logo are registered trademarks of Google LLC. Apple and the Apple logo are trademarks of Apple Inc. registered in the United States and other countries. App Store is the service mark of Apple Inc.

MyMazdaApp_US.indb 14 2019/09/23 11:07:08

15

For the country selection, the United States and Japan can be selected, however, select the United States. Be aware that this does not indicate language selection.

The registered data with the United States being selected cannot be displayed if the country is switched to Japan.

When fi rst launching the MyMazda APP, agreement to the selected country, terms of use, and the privacy policy is required.

When fi rst using the MyMazda APP, user registration is required. Touch REGISTER from the login screen. 2-2. Registering Your User Information

The selected country can be changed other than during the initial application launch. 2-2. Registering Your User Information/System Login

MyMazdaApp_US.indb 15 2019/09/23 11:07:10

16

2-1. Installing the MyMazda APP (Continued)

About the Use of Guest Mode The MyMazda APP comes with a guest mode for a simulated experience of Connected Service. You can do a demo run on the contents of Connected Service even if you do not have a user account and registered vehicle.

To use guest mode, touch Guest Mode from the login screen. Registration is unnecessary because user account and vehicle information necessary for content operations are prepared for demo use.

If you want to use Connected Service on a subscribed vehicle, you need to create a user account on the MyMazda APP and register your vehicle to the Connected Service support. 2-2. Registering Your User InformationRegistering User Information

MyMazdaApp_US.indb 16 2019/09/23 11:07:11

17

2-2. Registering Your User Information

When using the MyMazda APP for the fi rst time, your user information needs to be registered.

1. Touch REGISTER on the login screen.

If your user information has already been registered, log into the system. 2-2. Registering Your User Information /System Login/Logging Into the System

2. Enter your email address.

Enter the email address you want the MyMazda APP to use, and then touch NEXT .

Multiple user information cannot be registered under the same email address. Enter an email address that was not used on the MyMazda APP and MyMazda Web.

MyMazdaApp_US.indb 17 2019/09/23 11:07:11

18

3. Enter your phone number.

Enter the phone number you want the MyMazda APP to use, and then touch NEXT . In addition, touch NEXT on the phone number re-entry screen for confi rmation.

Check your SMS for the 6-digit validation code that was sent for the phone number you entered.

4. Enter the validation code.

Enter the 6-digit validation code sent to your SMS, and then touch SUBMIT .

The eff ective period of use of the validation code sent to your SMS is 10 minutes from when it was issued.

A validation code with an expired period of use cannot be used. Perform the procedure again from Step 1.

After entering the validation code, complete your user information registration within 60 minutes.

2-2. Registering Your User Information (Continued)

MyMazdaApp_US.indb 18 2019/09/23 11:07:12

19

5. Enter your user information.

Enter the information according to the screen directions, and then touch SUBMIT for the last time.

If your user information was registered correctly, a notifi cation of registration completion will be sent to your registered email address.

Enter a password of 6 to 16 letters, including a combination of letters and numerals. The following letters can be used: Alphabet: A to Z and a to z Numerals: 0 to 9 Symbols: @ * $ . ! %

If an error occurs, check for entry omission in the required items, a diff erence between the password and the password used for confi rmation, or a mistake in the email address.

Each type of your registered user information can be changed by touching Profi le from the Menu. 2-4. Changing Registered Information/Changing Your Profi le

MyMazdaApp_US.indb 19 2019/09/23 11:07:12

20

System Login

Logging Into the System Enter your user name and password on the login screen and touch LOGIN . When logged in, the home screen is displayed. Section 3/ Explanation of the Home Screen

1

2

3 4

5

6

7

8 9

1 Country Picker Changes the country setting on the MyMazda APP.

2 Email Enters your user account.

3 Password Enters your user password.

4 Biometric Icon Performs login by biometric authentication. Check the following: Your device is compatible with either Face ID or Touch ID. Biometric authentication is enabled at SETTINGS on the MyMazda APP. 3-8. Using the Menus of the MyMazda APP/SETTINGS

5 Keep me logged in Logging in and checking [Keep me logged in] will keep you in logged-in status for 30 days.

6 Login Logs into the MyMazda APP.

7 Forgot Password? If you have forgotten your password, touch [Forget Password?]. A validation code will be sent to your registered email address or phone number. Then, reset your password according to the instructions on the password reset screen on the MyMazda APP.

8 Register Performs your user registration.

9 Guest Mode Uses the MyMazda APP in Guest Mode. 2-1. Installing MyMazda APP/About the Use of Guest ModeAbout the

Use of Guest Mode

If you fail to log in correctly 5 times, you will be unable to log in for 5 minutes. You can also change your password from [Profi le]. 3-8. Using the Menus of the MyMazda APP/PROFILE

2-2. Registering Your User Information (Continued)

MyMazdaApp_US.indb 20 2019/09/23 11:07:12

21

If multiple vehicles are registered, the [SELECT VEHICLE] screen is displayed.

Up to 5 vehicles can be registered. If a device has already been already logged in, the login of the

device first used is invalidated and logged out. By touching [ADD VEHICLE], you can register a vehicle that you

can confirm on the MyMazda APP. 2-3. Registering Vehicle InformationRegistering Vehicle Information

Logging Out of the System Touch LOGOUT from the Menu to log out of the system. When the confirmation message is displayed, touch OK. 3-8. Using the Menus of the MyMazda APP

When logging out, your [Keep me logged in] status and your biometric authentication login settings are canceled.

MyMazdaApp_US.indb 21 2019/09/23 11:07:12

22

2-3. Registering Vehicle Information

1. From the menu, touch MYMAZDA and then MYVEHICLE.

2. Touch Add Vehicle from the action tab.

3. Touch SCAN VIN and have the camera read the barcode. If the barcode could not be read or when entering the VIN manually, touch [Manually enter VIN] and enter the VIN.

4. After entering the VIN, touch VALIDATE .

For the barcode and VIN positions, refer to the illustrations.

Barcode VIN

MyMazdaApp_US.indb 22 2019/09/23 11:07:13

23

5. If there is no problem with the VIN authentication, touch NEXT to register the vehicle information. If the authentication was not successful, make sure that the VIN is correct and then enter the correct VIN.

6. Enter the necessary information according to the instructions on the screen. After entering, touch SUBMIT .

7. Touch ENROLL to register Connected Service. If you touch DO IT LATER , the procedure ends without registering to Connected Service. In this case, touch [ENROLL] from the MY VEHICLES screen at a later time to register the service. 3-8. Using the Menus of the MyMazda APP/MY VEHICLES

MyMazdaApp_US.indb 23 2019/09/23 11:07:14

24

2-3. Registering Vehicle Information (Continued)

If the vehicle has already been enrolled in Connected Service by another user, verify that you will take over the contract. If you are taking over the contract, touch YES and then touch START on the next screen. The steps that follow are the same as from Step 9.

Do not take over the contract unless you have proper ownership of the vehicle. When you take over, the previous primary and secondary users will be unenrolled automatically, and the previous primary user will receive a notifi cation of being taken over.

8. Touch START to start registration to the service.

Because you need to check the center display, park the vehicle in a safe location and do the registration to Connected Service near the vehicle while carrying the key.

When the vehicle connection is completed, a push notifi cation is sent to the device. Turn on the push notifi cation setting for the device.

MyMazdaApp_US.indb 24 2019/09/23 11:07:14

25

9. Get in the vehicle and switch the ignition ON. Touch NEXT .

10. Link the vehicle to the device using the Authorization Code. Touch REQUEST to display the 6-digit Authorization Code on the center display of the vehicle.

It may require some time for the Authorization Code to be displayed on the center display.

If the Authorization Code is not displayed, verify that the vehicle is parked in a location with good radio wave reception.

The eff ective period of use of the Authorization Code is 4 minutes from being issued.

An Authorization Code with an expired period of use cannot be used. Touch REQUEST again.

When you select close, the screen closes and the Authorization Code is not displayed again. Please wait without operating the center display until the Authorization Code is displayed.

MyMazdaApp_US.indb 25 2019/09/23 11:07:15

26

2-3. Registering Vehicle Information (Continued)

11. Enter the Authorization Code displayed on the center display into your device and touch SUBMIT .

12. The Connected Service contract is being processed.

13. You are notifi ed when the Connected Service contract is completed.

MyMazdaApp_US.indb 26 2019/09/23 11:07:15

27

There are largely 2 types of information controlled by the MyMazda APP. Profi le information (customer information) Vehicle information (Mazda vehicle information) The following is an explanation of how each of the data is edited:

Changing Your Profi le Touch Action Tab on the profi le screen. Select the required operation from the following:

Change Email If you change your email address, the user account (email address) for logging into the system will also be changed.

Change Password Your password for logging into the system is changed.

Edit Profi le Profi le information such as your address can be edited.

If you touch DELETE ACCOUNT on the profi le editing screen opened by touching Edit Profi le, the service cancel screen is opened. Be aware that deleting your account ends your subscription to Connected Service. 4-2. Ending Use of Connected Service

2-4. Changing Registered Information

MyMazdaApp_US.indb 27 2019/09/23 11:07:16

28

Changing Vehicle Information

1. Touch Edit Vehicle from the Action Tab on the MY VEHICLES screen.

Add Vehicle Registers the vehicle to the application. 2-3. Registering Vehicle Information Edit Vehicle The vehicle information can be edited. Unsubscribe Connected Services Ends your subscription of the vehicle to Connected Service. 4-2. Ending Use of Connected Service

Registers, changes, and deletes a secondary driver in the vehicle information for each vehicle. You can register separate preferred dealer information.

If multiple vehicles are registered, register the information after switching to the vehicle to which you want it set. 3-8. Using the Menus of the MyMazda APP

[Unsubscribe Connected Services] is displayed by a vehicle currently being enrolled in Connected Service.

2-4. Changing Registered Information (Continued)

MyMazdaApp_US.indb 28 2019/09/23 11:07:17

29

Registering a Second Driver

1. Touch MANAGE DRIVERS on the MY VEHICLES screen, and then touch +INVITE DRIVER .

2. After entering the Secondary Driver information and setting the authorities to be given, touch SEND INVITE and follow the instructions on the screen.

A person with authority can set [VEHICLE ACCESS], which involves vehicle access, remote operations and so on, as well as [NOTIFICATION SETTINGS], which involve vehicle condition and maintenance.

MyMazdaApp_US.indb 29 2019/09/23 11:07:17

30

2-4. Changing Registered Information (Continued)

Refer to the following SETTING items:

[VEHICLE ACCESS] Vehicle Status 3-8. Using the Menus of the MyMazda APP/ INBOX/ Vehicle Status

Vehicle Health Report 3-3. Using Vehicle Monitor and Alert/Vehicle Health Report

Remote Control Access 3-2. Using Remote Control Vehicle Finder 3-4. Using Vehicle Finder POI send to Car 3-5. Using Send to Car

[NOTIFICATION PREFERENCES] Vehicle Status Alert 3-3. Using Vehicle Monitor and Alert/Vehicle Status Alert

The MyMazda APP stores data in the device. When transferring or disposing of your device, only uninstall the MyMazda APP.

Up to 4 Secondary Drivers can be registered to a single vehicle.

3. Invitation email will be sent to the registered email address of the Secondary Driver. Install the MyMazda APP and log in following the instructions.

MyMazdaApp_US.indb 30 2019/09/23 11:07:18

31

If the MyMazda APP has already been installed, go to Step 4.

4. When logged into the system, the invitation information is displayed. When the [ACCEPT] or [REJECT] message is displayed, select [ACCEPT].

If the Secondary Driver does not have an account, login will be available after user registration. 2-2. Registering Your User Information

If a Secondary Driver invites other users, invited users are displayed in the DRIVERS tab on the MY VEHICLES screen of the Primary Driver. If an invited user has not accepted an invitation yet, [PENDING] is displayed.

MyMazdaApp_US.indb 31 2019/09/23 11:07:18

32

2-4. Changing Registered Information (Continued)

Changing/Deleting a Second Driver

1. Touch the DRIVERS tab on the MY VEHICLE screen.

2. Touch MANAGE DRIVERS to display the secondary driver list.

3. Touch on the drivers you want to change or delete.

If you are making a change, update according to the screen and touch SAVE .

If you are making a deletion, touch [REMOVE DRIVER].

MyMazdaApp_US.indb 32 2019/09/23 11:07:19

33

Changing Your Preferred Dealer

1. Touch [MY MAZDA] on the menu screen, [My Preferred Dealer], and then [Edit Dealer].

2. Search for a dealer you want to register to a new preferred dealer, touch SET PREFERRED DEALER ,

and follow the instructions on the screen.

MyMazdaApp_US.indb 33 2019/09/23 11:07:20

34

MyMazdaApp_US.indb 34 2019/09/23 11:07:20

35

3. Using Connected Service

MyMazdaApp_US.indb 35 2019/09/23 11:07:20

36

Explanation of the Home Screen When you launch the MyMazda APP, the Home screen is displayed.

3

4

1 2

1 MAP Opens the map screen. 3-10. Using the MyMazda APP MAP

2 MENU Displays the menu. 3-8. Using the Menus of the MyMazda APP

3 Vehicle Information The vehicle model name and remaining fuel are automatically switched and displayed.

4 Main Navigation This is the navigation menu. 3-9. Using the MyMazda APP Main Navigation Menu

MyMazdaApp_US.indb 36 2019/09/23 11:07:22

37

3-1. Using Vehicle Malfunction Notifi cation

If a malfunction occurs with the vehicle, notifi cations of the malfunction conditions are as follows: Example of a notifi cation in the instrument cluster

Example of a notifi cation on the center display A notice of a signifi cant malfunction. If a serious malfunction occurs, the malfunction information is displayed by a pop-up message.

Information display on the Vehicle Status Monitor

Depending on the type of malfunction that occurred, there are diff erences in the types of notices.

For details about the indications in the instrument cluster and in the center display, refer to the owners manual of the vehicle and the Mazda Connect Owners Manual.

When contacting roadside assistance from the vehicle, refer to Mazda Connect Owners Manual and use the hands-free function. Roadside assistance can also be contacted through the MyMazda APP.

MyMazdaApp_US.indb 37 2019/09/23 11:07:22

38

3-1. Using Vehicle Malfunction Notifi cation (Continued)

If a malfunction occurs in the vehicle, the MyMazda APP will also be linked with the malfunction information through the system. If the vehicle cannot be driven due to a certain malfunction, the device receives information about the malfunction and a notice will be displayed without having to launch the MyMazda APP. Touching the notice on the display shows the details of the malfunction.

On the malfunction alert screen, roadside assistance or a dealer can be contacted. Past notices can be checked from the Inbox. 3-8. Using the Menus of the MyMazda APP/INBOX

MyMazdaApp_US.indb 38 2019/09/23 11:07:24

39

[In Case of a Serious Malfunction] Touch CALL ROADSIDE ASSISTANCE to make a call to

roadside assistance. By touching CALL DEALER the driver can call a dealer.

[In Case of a Non-Serious Malfunction] Touch CALL DEALER to make a call to your preferred dealer. When you touch SCHEDULE SERVICE , a service-in reservation screen to the dealer is

displayed. For details, refer to Site , or contact a dealer.

Depending on the type of malfunction, there are diff erences in the types of notices. Not all malfunctions result in a notifi cation. Roadside assistance can also be contacted from here. 3-8. Using the Menus of the MyMazda APP/ROADSIDE ASSISTANCE

Contact to a preferred dealer can also be made from here. 3-8. Using the Menus of the MyMazda APP/MYMAZDA/MY PREFERRED DEALER

MyMazdaApp_US.indb 39 2019/09/23 11:07:24

40

The Remote Control can be used from the home screen.

There may be a delay time between the device operation and the actual execution of an operation on the vehicle when using Remote Control.

If the engine has not been started for more than 9 days, or if the electric current of the communication device of the car is low, the signal cannot be received and the Remote Control will be temporarily unavailable.

Using Remote Control, operations can be implemented by touching and holding an icon for the desired operation. (Example) Engine Starting

Operation is executed on the vehicle side

A pop-up message is displayed when each type of request is sent. The results of execution can be checked from the Inbox. 3-8. Using the Menus of the MyMazda APP/INBOX/Active History

3-2. Using Remote Control

MyMazdaApp_US.indb 40 2019/09/23 11:07:28

41

Operations are not executed if you release your fi nger from the screen before the round meter completes its circle.

Even if a request transmission is successful, an error may occur with execution of the operation on the vehicle side due to a cause such as a door left open. If an error occurs, a pop-up message is displayed.

The results of a Remote Control operation can be confi rmed in the INBOX of the MENU.3-8. Using the Menus of the MyMazda APP/INBOX

Remote Engine Start Start the engine using the Remote Control. Press and hold START. When the engine starts, the temperature of the climate control is kept at the same temperature as when the engine was last turned off .

Never start the engine while inside an enclosed space where the exhaust fumes can build up, such as a garage or a poorly ventilated parking garage or structure. Exhaust fumes are hazardous and can cause poisoning or death.

DO NOT use remote start if the vehicle's fuel level is low. If the engine was last turned off with the A/C turned off , the rear window defogger,

windshield wiper de-icer and mirror defoggers will automatically turn on if the outside temperature is 40 F (5 C) or less to melt any snow and ice.

No functions will operate if the key is located inside the car. No functions will operate if all of the doors are not locked. Engines started by Remote Engine Start will turn off for safety reasons if an operation

such as opening the doors is performed. With the Remote Engine Start, the operation time of the warm-up (15 minutes) and

the accumulated warm-up time (35 minutes) is controlled. If the warm-up time (15 minutes) is exceeded, the engine is automatically stopped. However, if the [EXTEND] button is touched, the warm-up time can be extended by 15 minutes. If the accumulated warm-up time (35 minutes) is exceeded, the engine is automatically stopped, and the Remote Engine Start cannot be operated. The accumulated warm-up time can be reset by opening a door.

MyMazdaApp_US.indb 41 2019/09/23 11:07:29

42

Remote Engine Stop Turns off the engine by Remote Control. Scroll down the [START] button in the center of the screen to display [STOP], and press and hold [STOP].

The engine cannot be turned off if it was started by the push button start.

Remote Door Lock Locks the doors using the Remote Control. Press and hold the lock icon.

Remote Door Unlock Unlocks the doors using the Remote Control. Press and hold the unlock icon.

Neither door locking nor unlocking with the Remote Control will work if the car is in the following conditions: The engine is running. The key is left inside the vehicle. Any door is not locked.

3-2. Using Remote Control (Continued)

MyMazdaApp_US.indb 42 2019/09/23 11:07:31

43

Remote Hazard Light Flashes/turns off the hazard warning lights for a certain period of time using the Remote Control. Press and hold the fl ash icon or the lights-off icon.

No operations will occur if all the doors and trunk/liftgate are not closed. The lights-off operation does not operate using hazard warning lights that are turned on

by the Vehicle Finder.

MyMazdaApp_US.indb 43 2019/09/23 11:07:31

44

3-3. Using Vehicle Monitor and Alert

The following vehicle information can be monitored with the MyMazda APP and alerts can be set up to remind the driver if something is not in a certain state (such as doors are not locked).

Vehicle Status The status of the vehicle's doors, trunk/liftgate, and lighting systems can be checked by touching STATUS on the Main Navigation Menu.

1

2

3

Alert Card When touched, you can check for operations you may have overlooked such as leaving the doors unlocked or leaving the hazard warning lights turned on. 3-3. Using Vehicle Monitor and Alert/Vehicle Status Alert

Fuel Displays the remaining amount of fuel in the fuel tank.

Odometer Displays the total traveled distance.

MyMazdaApp_US.indb 44 2019/09/23 11:07:32

45

By touching , detailed information about the vehicle can be checked. 4

5

7

8

9

10

6

Pull to Refresh Updates the displayed information.

Tire Pressure Displays the air pressure of each of the four tires.

Status Ring Displays the error status of the registered vehicle (doors/hood/trunk open or tire pressure problem).

Door Status Displays the door open/close status and the lock status.

Trunk/Liftgate Status Displays the trunk/liftgate open/close status.

Hood Status Displays the hood open/close status.

Hazard Warning Light Status Displays the hazard warning light status.

Vehicle Status data is updated when the engine is stopped. While the engine is running, information is not updated even if the [Pull to Refresh] is touched.

MyMazdaApp_US.indb 45 2019/09/23 11:07:33

46

3-3. Using Vehicle Monitor and Alert (Continued)

Vehicle Status Alert The MyMazda APP will be notifi ed through the system if the vehicle detects an operation made by mistake and the device will display this notifi cation even if the MyMazda APP is not being used. By touching the displayed notifi cation, the details can be checked.

If the notifi cation is no longer displayed, it can be checked from the INBOX on the MENU. 3-8. Using the Menus of the MyMazda APP/INBOX

A notifi cation is sent if an operation such as one of the following is detected and considered to be made by mistake. The notifi cation is sent when several minutes have passed after the ignition is switched OFF.

Forgetting to close the doors, trunk/liftgate or hood. Forgetting to lock the doors. Forgetting to turn off the hazard warning lights

Even after a user oversight notifi cation is transmitted once, if a change in the vehicle status, such as indicated above is detected, the user is notifi ed.

When the vehicle is being serviced at a dealer, you may be notifi ed depending on the what is being worked on.

As for forgetting to lock the doors or turning off the hazard warning lights, the doors can be locked or the hazard warning lights can be turned off using the Remote Control without having to go back to the vehicle.3-2. Using Remote Control

You can stop receiving Vehicle Status Alert notifi cations. 3-8. Using the Menus of the MyMazda APP/SETTINGS Vehicle Status Alert will stop sending notifi cations even if the driver stays in the vehicle with the engine turned off .

After all the doors are locked with a person in the vehicle, if the doors are unlocked an oversight notifi cation will not be sent.

MyMazdaApp_US.indb 46 2019/09/23 11:07:34

47

Vehicle Health Report Enables you to check maintenance information such as engine oil status, and tire air pressure status. The Vehicle Health Report can be checked by touching SERVICE on the Main Navigation Menu.

1

2

3

4

Alert Card When a part(s) replacement or a fl uid refi ll service approaches, a notice will be sent. By touching the notice, the detailed information of the notice can be reviewed.

Recommended Oil Change Displays the distance until the oil replacement is due as a guide.

Engine Oil Amount Displays the engine oil level information.

Schedule Service When maintenance work is required, a service shop appointment can be made. When you touch SCHEDULE SERVICE , a service-in reservation screen to the dealer is displayed. For details, refer to Site , or contact a dealer.

MyMazdaApp_US.indb 47 2019/09/23 11:07:35

48

When you touch , you can check maintenance information details.

6

5

7

8

10

9

11

Pull to Refresh Updates the displayed information.

Your Next Milestone Date Displays the next vehicle inspection date.

Your Next Milestone Displays an approximation of the driving range until the next inspection.

View All Milestone Displays a list, as a guide, all distances until inspection.

Tire Pressure The air pressure of each of the 4 tires can be checked.

Light Displays the light status.

Tire Pressure Battery Displays the battery status of the tire pressure sensors.

Vehicle Health Report data is updated when the engine is stopped. While the engine is running, information will not be updated even if you touch [Pull to Refresh].

3-3. Using Vehicle Monitor and Alert (Continued)

MyMazdaApp_US.indb 48 2019/09/23 11:07:35

49

3-4. Using Vehicle Finder

Vehicle Finder has two functions: To indicate the vehicle's location on the map and to turn on the hazard warning lights for the visual confi rmation of the vehicle. In order to turn on the hazard warning lights, open the detailed information from the screen of MY CAR.

Vehicle Finder displays the location of the vehicle and the distance from the device displayed by the MyMazda APP. To turn on the vehicles hazard warning lights, display the MY CAR display details.

The distance from the device displayed by the MyMazda APP, the location of the vehicle, and the amount of time the vehicle was parked are displayed. If FLASH LIGHTS is touched, the horn will sounds twice and the hazard warning lights of the vehicle will fl ash 10 times.

When the vehicle is in a location subject to weak radio wave signals, such as an underground parking garage, communicating with the system may be diffi cult, therefore, the location indication may be incorrect and/or operations may not be able to be performed.

Vehicle Finder references information when the engine is stopped. No operations will occur if all the doors and trunk/liftgate are not closed.

MyMazdaApp_US.indb 49 2019/09/23 11:07:38

50

3-5. Using Send to Car

Send to Car is a function which uses the MyMazda APP to search the destination of the navigation and send it to the vehicle. First, use the MyMazda APP and select a destination to be sent to the vehicle.

Then Search for the destination that you wish to set or search for the destination using the map by touching MAP on the home screen.

If you receive a destination when driving in the vehicle, avoid any distractions and do not divert your attention away from driving the vehicle.

To use the navigation system, the SD card containing the map information needs to be inserted in the SD card slot.

Send to Car can send up to three destinations concurrently. Navigation pathways must be set for the respective destinations received. When sending multiple destinations, it is convenient to send them all at once instead of

sending them one after another. When the power is off , the vehicle cannot receive a destination. The vehicle will receive the

destination after the engine is started. If a location where a route search is not possible such as over water is sent, the destination

of the navigation route will not be set by the vehicle. Up to 10 destinations can be set to the navigation route. If you exceed the maximum

number of destinations sent by Send to Car, either discard the routes the vehicle already set and set the received destination as the new destination, or cancel the received destination.

When editing a navigation pathway, refer to the NAVIGATION SYSTEM Owners Manual.

MyMazdaApp_US.indb 50 2019/09/23 11:07:38

51

When Sending One Destination

1. Display the detailed information for the destination that was searched.

2. Touch SEND TO CAR .

3. The destination is automatically received by the vehicle.

If a Navigation Route Has Not Been Created by the Vehicle When setting the route using the received destination, select [Create] and edit the navigation route.

If a Navigation Route Setting by the Vehicle Has Been Completed Select whether the received destination is to be set as a new destination or to be added to the existing route.

To discard the existing route and set a new route, select [Replace]. To add to the existing route, select [Add] and edit the navigation route for each destination.

When adding a destination to an existing navigation route, select a position to insert as shown in the fi gure. Add (2), (3) as transit points with (1) as the fi nal destination.

MyMazdaApp_US.indb 51 2019/09/23 11:07:40

52

When Sending Multiple Destinations

1. Display the detailed information for the fi rst destination that was searched.

2. Touch [Location] ( ), and add the second destination. For the last spot, touch SEND TO CAR , which collectively sends points up to this point to the vehicle.

Up to three destinations can be sent at a time. Touch [Location] at the fi rst and second destinations, then touch SEND TO CAR at the third destination to send the three destinations.

The same destination cannot be sent repeatedly.

3. The destinations are automatically received by the vehicle.

If a Navigation Route Has Not Been Created by the Vehicle When setting the route using the received destination, select [Create] and edit the navigation route.

3-5. Using Send to Car (Continued)

MyMazdaApp_US.indb 52 2019/09/23 11:07:42

53

If a Navigation Route Setting by the Vehicle Has Been Completed Select whether the received destination is to be set as a new destination or to be added to the existing route.

To discard the existing route and set a new route, select [Replace]. To add to the existing route, select [Add] and edit the navigation route for each destination.

If destinations are to be added to the existing navigation route, they are inserted in the area in the order they were set in the MyMazda APP. If the positions differ from your intended positions, edit the navigation route to arrange the order of the destinations.

MyMazdaApp_US.indb 53 2019/09/23 11:07:42

54

3-6. Using In-Car Wi-Fi

In order to initiate the use of in-car Wi-Fi, configure the Wi-Fi settings using the center display and enter into a contract using your Wi-Fi device.

Wi-Fi Setting Procedure at the Vehicle

1. Select Settings from the MENU.

2. Select Connectivity.

3. Select the in-Car Wi-Fi Setting.

1 Wi-Fi Hotspot Turn on to enable in-car Wi-Fi at your vehicle.

2 SSID Sets the SSID name to connect the Wi-Fi device in the vehicle as in-car Wi-Fi.

3 Wi-Fi Password Sets a password for when connecting to the SSID

4 Hide Access Point When set to on, the SSID for the in-car Wi-Fi is set so as not to display the access point. (Only those who know the SSID can connect.)

5 Wi-Fi Security Type Sets the security type for when using the SSID for the in-car Wi-Fi. You should set the security level as high as possible in conjunction with your connected Wi-Fi device.

6 Wi-Fi Channel Sets the channel for use by the SSID for the in-car Wi-Fi.

7 Connected Devices Displays the number of devices connected to the current in-car Wi-Fi.

When the Wi-Fi settings at the vehicle are completed, connect your Wi-Fi device to the SSID.

1

2

3

4

5

6 7

MyMazdaApp_US.indb 54 2019/09/23 11:07:43

55

Contract With Your Wi-Fi Device

1. If the Wi-Fi connection screen does not automatically appear on your device, launch the web browser.

2. Follow the on-screen prompts to complete the contract.

Once the contract is completed, the Internet can be used. Set the Wi-Fi on the device that will be using the Internet.

The in-car Wi-Fi service uses the vehicles communication unit. For this reason, before using the in-car Wi-Fi, it is necessary to complete enrollment to Connected Service.

Before enrolling in Connected Service, the Wi-Fi setting screen cannot be selected by the vehicle.

With an in-car Wi-Fi service contract, always connect to the Wi-Fi set at the vehicle. You cannot contract using your mobile phone network.

In-car Wi-Fi supports connections for up to five devices at the same time.

MyMazdaApp_US.indb 55 2019/09/23 11:07:43

56

3-7. Using Online Update

With Online Update, Mazda Connect updates (online update) are possible.

Automatic Update Confirmation Setting

1. Select System from the Settings.

2. Select Software Update.

3. Check the box for Automatically Check for Updates to turn it on and periodically check if there is software to be updated. If it is turned off, update checks are not done.

Updating Software Manually

1. Select Check for Software Updates as shown on the screen above.

If there is a software version that can be updated, you can update it. Select Update, agree to the terms of use, and then begin the update. The update proceeds in the order of downloading and then installing.

When the installation is finished, switch the ignition OFF once and then restart the engine to enable the latest software.

MyMazdaApp_US.indb 56 2019/09/23 11:07:43

57

Online Update cannot handle some updates. In this case, it is necessary to have a dealer do the update.

Mazda Connect can be used as normal even while an Online Update is being done. The Online Update proceeds in the background even while the navigation or an entertainment screen is displayed.

Even when downloading or installing updated software, the ignition can be switched OFF and the vehicle can be used as usual. The next time the ignition is switched ON, the Online Update will automatically proceed from where it was stopped.

The information and data you have set will not be deleted by the Online Update.

MyMazdaApp_US.indb 57 2019/09/23 11:07:43

58

3-8. Using the Menus of the MyMazda APP

When the menu tab on the home screen is touched, the MENU screen opens and the following items are displayed:

INBOX3-8. Using the Menus of the MyMazda APP/INBOX

PROFILE3-8. Using the Menus of the MyMazda APP/PROFILE

MYMAZDA3-8. Using the Menus of the MyMazda APP/MYMAZDA

ROADSIDE ASSISTANCE 3-8. Using the Menus of the MyMazda APP/ROADSIDE ASSISTANCE

SUPPORT 3-8. Using the Menus of the MyMazda APP/SUPPORT

SETTINGS3-8. Using the Menus of the MyMazda APP/SETTINGS

1 SWITCH VEHICLE With the MyMazda APP, remote operation and information confi rmation can be done for a single vehicle. If multiple vehicles have been registered and you want to switch to a diff erent vehicle, touch the vehicle and then touch CONFIRM .

2 LOGOUT Logs you out of the system. 2-2. Registering Your User Information/System Login/Logging Out of the System

INBOX With INBOX, the information received by the MyMazda APP can be confi rmed.

Select INBOX from the MENU. The small numeral next to INBOX indicates the number of unread messages. Messages are displayed together with the

day they were received and grouped such as [Today] and [This Month].

Messages include the title and the received date with the message text displayed on two lines.

When confi rming the details of a message, touch the message.

1 Action Tab Messages can be deleted and settings can be changed.

2 Category Tab

Switches the message category. Safety & Security Activity History News & Update Maintenance Vehicle Status

3 Flag Unread message Important message

1 2

1

3

2

MyMazdaApp_US.indb 58 2019/09/23 11:07:44

59

Category Tab

Safety & Security Provides a malfunction notice from the vehicle. Although information about serious malfunctions are displayed on the Home screen and the standby display of the device, all information including information other than that of severe malfunctions can be confirmed in Safety & Security. 3-1. Using Vehicle Malfunction Notification

Active History You can check the results of an operation that was made using Remote Control. This message is the same information that is displayed by pop-up when the Remote Control is operated. 3-2. Using Remote Control

News & Update You can check for special information from a Preferred dealer and notifications from Mazda.

You can set the function not to receive information. 3-8. Using the Menus of the MyMazda APP/SETTINGS

Maintenance You can check information related to maintenance in the Vehicle Health Report. If there is an important notification, it may be displayed on the home screen and the standby screen of the device, but all information can be checked here. 3-3. Using Vehicle Monitor and Alert/Vehicle Health Report

Vehicle Status You can check notification information in the Vehicle Status Alert. 3-3. Using Vehicle Monitor and Alert/Vehicle Status Alert

You can set the function not to receive Vehicle Status Alerts. 3-8. Using the Menus of the MyMazda APP/SETTINGS

MyMazdaApp_US.indb 59 2019/09/23 11:07:44

60

PROFILE With PROFILE, you can check registered user information and make changes.

The following information can be updated by the Action Tab.

Change Email

Change Password

Edit Profi le 2-4. Changing Registered Information/Changing Your Profi le

MYMAZDA With MyMazda, you can check for information related to registered vehicles and Mazda dealers.

3-8. Using the Menus of the MyMazda APP (Continued)

MyMazdaApp_US.indb 60 2019/09/23 11:07:45

61

MY VEHICLES You can check/set your vehicle information.

The following information can be updated by the Action Tab. Add Vehicle2-3. Registering Vehicle Information Edit Vehicle2-4. Changing Registered Information/

Changing Vehicle Information Unsubscribe Connected Services 4-2. Ending Use of Connected Service

1 Vehicle Tab If you have registered two or more vehicles, the target vehicles for the MyMazda APP can be switched.

2 Vehicle Name Displays the vehicle name, model year, and VIN, and whether you are enrolled in Connected Service.

3 VEHICLE INFO/ DRIVERS Tab

Switches the vehicle information and registered driver information to display. When you touch [MANAGE DRIVERS], you can register additional drivers, do editing, and make deletions. 2-4. Changing Registered Information

If you are not enrolled in Connected Service, the ENROLL button is displayed in Vehicle Name. Touch ENROLL to enroll in Connected Service. 2-3. Registering Vehicle Information/Step 7

MY PREFERRED DEALER You can confi rm/set your preferred dealer.

The following information can be updated by the Action Tab.

Edit Dealer2-4. Changing Registered Information

1 Dealer Name Name of My Preferred Dealer.

2 VIEW SERVICE OFFERS

You can check valuable information provided by My Preferred Dealer.

3 SCHEDULE SERVICE

Displays the service-in reservation screen to My Preferred Dealer. For details, refer to the Site, or

make an inquiry with the dealer.

1

2

3

1

2

3

MyMazdaApp_US.indb 61 2019/09/23 11:07:46

62

MANUALS & GUIDES Provides Owner's Manual and reference material.

1 VEHICLE HOWTO You can check useful How-tos to make better use of your vehicle.

2 OWNER'S MANUAL You can check the owners manual.

3 SMART START GUIDE You can check the smart start guide.

MY SERVICES Provides information and schedules for vehicle maintenance and service.

1 MAINTENANCE & SCHEDULE

Enables service appointments to be scheduled and confi rms set appointments.

2 SERVICE HISTORY Enables a maintenance service to be registered as service history.

3 SERVICE REMINDER Enables a reminder to be set for a service appointment.

4 SERVICE OFFERS Displays voucher(s) provided by My Preferred Dealer.

SCHEDULE SERVICE Enables a service appointment to be scheduled with the dealer.

1

2

3

41 I'M NEW HERE Enables a new service appointment to be scheduled.

2 FIND ME Displays a set service appointment.

3 SIGN IN Enables logging into Schedule Service.

4 I'M IN A HURRY

Registers a service-in without logging in.

1

2

3

1

2

3

4

3-8. Using the Menus of the MyMazda APP (Continued)

MyMazdaApp_US.indb 62 2019/09/23 11:07:46

63

For details on SCHEDULE SERVICE, refer to Site, or make an inquiry with your dealer.

RECALL SEARCH You can check for recall information.

1 VIN Enter the VIN. If the vehicle selection has been completed, automatic entry is done.

2 SEARCH Searches for relative recall information based on the VIN.

Refer to the illustrations for the barcode and VIN positions. Barcode VIN

1

2

MyMazdaApp_US.indb 63 2019/09/23 11:07:48

64

ROADSIDE ASSISTANCE Enables Roadside Assistance to be requested and confi rmation of information on the request.

1

2

3

4

1 Check status of an Existing Request

Checks the status of the roadside assistance requested. Follow the on- screen guidance, specify the vehicle, and check the status.

2 CONTACT US Makes inquiries by email to Roadside Assistance.

3 CALL ROADSIDE ASSISTANCE

Makes a phone call to Roadside Assistance.

4 Request Roadside Assistance

Contacts Roadside Assistance. Enter the necessary information according to the guidance on the displayed screen.

SUPPORT Enables a variety of useful information to be checked.

FAQ Displays frequently asked questions about the vehicle and service.

Onboarding Experience Introduces the merits of a premium owner.

Quick Links Links to the related information. Mazda Connect Information page for Mazda Connect. Map Update Update page for navigation maps. Warranty Warranty servicing page for Mazda. Full Circle Service Introduction of Mazdas full circle service. MazdaUSA Mazdas homepage. Inside Mazda Page for up-to-date information from Mazda. Zoom-Zoom Magazine Digital magazine page. in-Car Wi-Fi Administrative page for in-vehicle Wi-Fi service. 3-6. Using In-Car Wi-Fi

Accessories Introductory page for Mazda-genuine accessories. Parts Introductory page for Mazda-genuine parts.

3-8. Using the Menus of the MyMazda APP (Continued)

MyMazdaApp_US.indb 64 2019/09/23 11:07:49

65

Contact Mazda Opens the access page to the customer center. The customer center can be accessed via:

Chat Telephone Email

Enter the information according to the displayed screen.

Terms & Conditions Displays each type of term and condition.

Terms & Conditions may be subject to changes.

Privacy Policy Displays each type of privacy policy.

The Privacy Policy may be subject to changes.

MyMazdaApp_US.indb 65 2019/09/23 11:07:50

66

SETTINGS You can make settings for the MyMazda APP.

1

2

3

4

1 Enable Face ID Enables or disables Face ID for the device. Refer to the manual of the device in order to confi rm whether Face ID can be used with the device.

2 Vehicle Status Alert Sets whether or not to receive Vehicle Status Alerts. 3-3. Using Vehicle Monitor and Alert

3 Information Sets whether or not to receive Information notifi cations. 3-8. Using the Menus of the MyMazda APP/INBOX

4 Version Number Displays the MyMazda APP version number.

3-8. Using the Menus of the MyMazda APP (Continued)

MyMazdaApp_US.indb 66 2019/09/23 11:07:50

67

3-9. Using the MyMazda APP Main Navigation Menu

REMOTE Certain features of the vehicle can be remotely controlled using the MyMazda APP.

3-2. Using Remote Control

STATUS Checks the status of vehicles.

3-3. Using Vehicle Monitor and Alert/ Vehicle Status Alert

MyMazdaApp_US.indb 67 2019/09/23 11:07:53

68

SERVICE Checks the maintenance information of vehicles.

3-3. Using Vehicle Monitor and Alert/ Vehicle Health Report

HELP Enables communication with Roadside Assistance and Mazda customer center.

3-9. Using the MyMazda APP Main Navigation Menu (Continued)

MyMazdaApp_US.indb 68 2019/09/23 11:07:55

69

SEARCH Enables information about facilities on the map such as Mazda dealers to be searched.

The past search history is displayed on the search screen. By touching [HISTORY], the past search history and history (10 items) sent as navigation destinations to the vehicle can be checked.

MyMazdaApp_US.indb 69 2019/09/23 11:07:56

70

Touching a searched facility displays its detailed information and enables the following information to be checked.

Distance Displays the distance to a search result from this device.

Options Location

Used when sending multiple facility information as destinations to the vehicle navigation. 3-5. Using Send to Car

Share Enables the facility information to be shared with SNS, email, among others.

Favorite Enables searched spots to be added to Favorites.

Navigate Launches the devices navigation to set the searched spot as the destination.

POI detail Displays detailed facility information. Addresses Websites Telephone numbers Service O ers (Only with dealers)

Touch Service O ersto check valuable information for that dealer.

Schedule Service (Only with dealers) Touch Schedule Service to display the service-in reservation screen to the dealer. For details, refer to Site, or make an inquiry with your dealer.

SET PREFERRED DEALER (Only with dealers) Touch SET PREFERRED DEALER to set this dealer as your preferred dealer.

If a dealer that is already the Preferred Dealer is touched, CURRENT PREFERRED DEALER will be displayed.

Send to Car Enables facility information to be sent as a destination to the vehicle's navigation system. 3-5. Using Send to Car

1

2

3

4

5

3-9. Using the MyMazda APP Main Navigation Menu (Continued)

MyMazdaApp_US.indb 70 2019/09/23 11:07:57

71

3-10. Using the MyMazda APP MAP

Touch MAP on the Home screen to open the map screen.

Search Experience Use this when searching a spot on the map. 3-9. Using the MyMazda APP Main Navigation Menu/SEARCH

Shortcut Menu DEALERS

Displays nearby dealers. MY DEALER

Displays your Preferred Dealer. FUEL

Displays a nearby gasoline station. FAVORITE

Displays spots registered to your Favorites. 3-9. Using the MyMazda APP Main Navigation Menu/SEARCH/Favorite

MY CAR Displays the vehicle location. 3-4. Using Vehicle Finder

1

2

MyMazdaApp_US.indb 71 2019/09/23 11:07:58

72

MyMazdaApp_US.indb 72 2019/09/23 11:07:58

73

4. Other Information

MyMazdaApp_US.indb 73 2019/09/23 11:07:58

74

4-1. Troubleshooting

Many inquiries are presented on the Web. For details, refer to the site. http://mazda.custhelp.com/

Additionally, you can also check your MyMazda APP. 3-8 Using the Menus of the MyMazda APP/SUPPORT

MyMazdaApp_US.indb 74 2019/09/23 11:07:58

75

MyMazdaApp_US.indb 75 2019/09/23 11:07:58

76

There are the following 3 methods to end use of Connected Service. When cancelling Connected Service, always carry out one of the ending use operations.

By ending use of Connected Service, it will no longer be possible to use any of the services except Automatic 911 dialing. Functions that were previously available with Connected Service such as INBOX will no longer be available even at the MyMazda APP, and it will no longer be possible to view even past history.

(1) Ending Use of Connected Service, But Continuing Use of Your Vehicle

Unsubscribe Connected Service

(2) Parting With a Vehicle That Used Connected Service, But Planning to Use Another Mazda Vehicle

Delete vehicle

Delete account

4-2. Ending Use of Connected Service

(3) Parting With a Vehicle That Used Connected Service and Information From Mazda is Unnecessary

Status of use of Connected Service

You will still be able to use your vehicle as is even after ending use of Connected Service. Connected Service functions will no longer be available from the MyMazda APP, however, you will still be able to make reservations for having your vehicle serviced at your dealer, and get access to valuable information.

Deletes the account itself used by Connected Service. Doing this will delete all of your information from the system and you will be withdrawn from Connected Service automatically.

Deletes the vehicle registration information used by Connected Service. You will also be withdrawn from Connected Service automatically. Although only customer information remains in the system, if you are planning on using a Connected Service compliant Mazda vehicle afterwards, you can continue using the MyMazda APP by registering the vehicle.

Connected Service account registration

Customer information registration for Connected Service contract

Vehicle information registration available for Connected Service

Connected Service contract

Connected Service account registration

Customer information registration for Connected Service contract

Vehicle information registration available for Connected Service

Connected Service contract

Connected Service account registration

Customer information registration for Connected Service contract

Vehicle information registration available for Connected Service

Connected Service contract

Connected Service account registration

Customer information registration for Connected Service contract

Vehicle information registration available for Connected Service

Connected Service contract

MyMazdaApp_US.indb 76 2019/09/23 11:07:58

77

(1) Ending Use of Connected Service, But Continuing Use of Your Vehicle

You will be unable to use functions of Connected Service, such as Remote Control, but you will be able to use the vehicle as is. Perform the following operation on the MyMazda APP:

1. Touch MY VEHICLES on MYMAZDA from the MENU.

2. Touch Unsubscribe Connected Service from the Action Tab.

3. Read the WARNING carefully, and touch [CONFIRM] if you are sure you wish to unsubscribe.

MyMazdaApp_US.indb 77 2019/09/23 11:07:59

78

4-2. Ending Use of Connected Service (Continued)

(2) Parting With a Vehicle That Used Connected Service, But Planning to Use Another Mazda Vehicle

Withdraw from Connected Service and delete your vehicle information from the MyMazda APP. If you have registered multiple vehicles or you are considering replacing your vehicle with another Mazda vehicle, you can continue to use the MyMazda APP.

1. Touch MY VEHICLES on MYMAZDA from the MENU.

2. Touch Edit Vehicle from the Action Tab.

3. Touch [DELETE VEHICLE].

4. Read the WARNING carefully, and touch [CONFIRM] if you are sure you wish to delete the vehicle.

By deleting the vehicle, you are withdrawn from Connected Service automatically.

5. Initialize your personal information from the center display. 4-3 When Parting With Your Vehicle/ Initializing Personal Initialization

MyMazdaApp_US.indb 78 2019/09/23 11:08:00

79

(3) Parting With a Vehicle That Used Connected Service and Information From Mazda is Unnecessary

Delete your user account that used the MyMazda APP. You will no longer be able to use the MyMazda APP.

1. Touch PROFILE from the MENU.

2. Touch Edit Profi le from the Action Tab.

3. Touch [DELETE ACCOUNT].

4. Read the WARNING carefully, and touch [CONFIRM] if you are sure you wish to delete your account. By deleting your account, you are withdrawn from Connected Service automatically, and

the vehicle registration information connected to your account is deleted.

If you want to use Connected Service and the MyMazda APP again, you need to create a new user account.

5. Initialize your personal information from the center display. 4-3 When Parting With Your Vehicle/ Initializing Personal Initialization

MyMazdaApp_US.indb 79 2019/09/23 11:08:00

80

4-3. When Parting With Your Vehicle

When parting with your vehicle, always do the following procedure to protect your important information.

Canceling Subscription to Connected Service Cancel your subscription to Connected Service from the MyMazda APP. 4-2 Ending Use of Connected Service

Initializing Personal Initialization Initialize your personal information from the center display.

1. Select [System Settings] from [Settings].

2. Select [Restore All Factory Settings] from [System Settings].

3. Select [Initialize] to start the initialization. When the initialization is completed, the center display relaunches.

The read CD data and the Intelligent Drive Master (i-DM) score data are not deleted

MyMazdaApp_US.indb 80 2019/09/23 11:08:00

81

4-4. Terms of Service

Each of the terms of use and conditions, and the privacy statement can be viewed on the Web. For further details, refer to the site: Terms and Conditions: https://www.mazdausa.com/site/terms-of-useconnectedservices Privacy Statement: https://www.mazdausa.com/site/privacy-connectedservices

Additionally, you can check your MyMazda APP. 3-8 Using the Menus of th

Manualsnet FAQs

If you want to find out how the Mazda 3 Mazda works, you can view and download the Mazda 3 Hatchback 2020 Connected Services Manual on the Manualsnet website.

Yes, we have the Connected Services Manual for Mazda Mazda 3 as well as other Mazda manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Connected Services Manual should include all the details that are needed to use a Mazda Mazda 3. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Mazda 3 Hatchback 2020 Connected Services Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Mazda 3 Hatchback 2020 Connected Services Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Mazda 3 Hatchback 2020 Connected Services Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Mazda 3 Hatchback 2020 Connected Services Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Mazda 3 Hatchback 2020 Connected Services Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.