Logik L19HE12I Quick Start Guide PDF

1 of 1
1 of 1

Summary of Content for Logik L19HE12I Quick Start Guide PDF

GB

Unpacking1

Installing the Base Stand3

Operating Your Remote Control2

Connecting the Aerial4

Turning the TV On for the First Time6

Connecting to the Mains Socket5

Target Region Descriptor7

Connect one end of the RF coaxial cable to the aerial socket on the wall and the other end of the cable to the RF (75) socket at the rear right side of your TV.

Do not connect the TV to the mains supply until you have completed all the connections.

1. Connect the mains cable to the mains socket after you have completed all the connections.

2. At this stage, the TV switches to standby mode. The red LED indicator will illuminate on the front panel of the TV.

3. In standby mode, press the button on the right side panel of the TV or on the remote control to turn the TV on. The red LED indicator will turn blue.

To mains socket

Remove all packaging from the TV. Retain the packaging. If you dispose of it please do so according to any local regulations.

Make sure the (+) and ( ) ends of the batteries match the (+) and ( ) ends indicated in the battery compartment.

1. Press and lift the back cover to open the battery compartment of the remote control.

2. Insert two AAA size batteries. Close the battery compartment cover.

TV

TV Stand Support

Quick Start Guide

TV Base

Remote Control / AAA Batteries x 2

Instruction Manual

Screw A x 1

Screw B x 1

1. Lay the TV down on a flat surface with the back side facing up. Please make sure a soft cushioned material (such as a pillow or thick piece of foam) is placed beneath the screen.

2. To install the TV stand, first attach the stand support to the TV by using screw A. Align the screw hole then use screw A to fix the stand support to the TV. 3. To install the base stand, align the screw hole, then secure with a screw driver (not included) using the screw B provided.

screw

screw

Quick Start Guide L19HE12I

Thank you for purchasing your new Logik TV.

Your new TV incorporates the latest technology to enhance your viewing experience. We would suggest that you allow about 20 mins for initial setup.

Please follow this guide for a successful first time installation.

19" HD Ready LED TV

USB HDMI2 HDMI1 PC IN RFCOMMON INTERFACE (CI)

HEADPHONE PC AUDIO

RF Coxial Cable (not included)

OR

Screw A x 1 (P.N.: 209100422B1)

Screw B x 1 (P.N.: 20912223101)

TV Front Base Stand Front

Target Region Setting

Country Code GBR

Primary Region England

Secondary Region

Tertiary Region

London

During tuning your TV may have received signals from more than one transmitter. If this has occurred the Target Region Descriptor screen will be displayed. This will enable you to select the correct regional transmission for the local news service that you require.

Press the buttons to adjust each option's setting and then press the OK button to confirm.

This will be shown as GBR for the UK.

This will show the regional country (England, Wales, Scotland, NI).

This will allow you to set the region for your local news service on BBC and ITV (London, Beds and Cambs etc).

You may receive signals from more than one transmitter within the Secondary

Region, (e.g Beds and Cambs may have Luton or Sandy Heath).

The first time you turn the TV on, it will go straight into First Time Installation menu.

(P.N.: 4033C196111)

1. Press the OK button to start First Time Installation menu.

2. Press the buttons to select your desired language to be displayed on the menu. The default on-screen menu language is set as English. Press the OK button to confirm.

3. Press the buttons to select DVB-T / DVB-C and then press the OK button to confirm.

3a. If you select DVB-T, press the buttons to select the desired country and then press the OK button to start tuning.

4. Channel tuning will commence. This operation may take up to 6 minutes. The display will show the progress of the tuning and the number of channels found.

First Time Installation

Please ensure aerial is plugged in!

Then press OK button.

Dansk

Deutsch

Hrvatski

Italiano

OSD Language

OK

Magyar

Nederlands

Norsk

PolskiEnglishCesky

E k

Espanol~

Fran ais

Portugues

Pycck

DVB-C

DVB SELECT TYPE

DVB-T

Tune Type DTV

Ireland

Austria Croatia

Belgium Czech

Australia Bulgaria Denmark

UK

MENU

DVB-C Scan Menu

Scan type Full

610000

Auto

Auto

Frequency

Network ID

Symbol(ks/s)

OK MENU

Channel Tuning

TV : 0 Channel(s) DTV : 3 Channel(s) Radio : 0 Channel(s) Data : 0 Channel(s)

36%... 668.75MHz

Please press MENU to skip.

(DTV)

3b. If you select DVB-C, the next step is to configure the DVB-C system (Scan type / Frequency / Network ID / Symbol(ks/s). Press the OK button to go to the tune type and add country select menu. This step is the same as the DVB-T's select the tune type (DTV) process. Press the buttons to select the desired country and then press the OK button to start tuning.

Well done, your new TV is now ready to use. You will find that there are many exciting features available. To get to know all these features, please take some time t

Manualsnet FAQs

If you want to find out how the L19HE12I Logik works, you can view and download the Logik L19HE12I Quick Start Guide on the Manualsnet website.

Yes, we have the Quick Start Guide for Logik L19HE12I as well as other Logik manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Quick Start Guide should include all the details that are needed to use a Logik L19HE12I. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Logik L19HE12I Quick Start Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Logik L19HE12I Quick Start Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Logik L19HE12I Quick Start Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Logik L19HE12I Quick Start Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Logik L19HE12I Quick Start Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.