Logik L90SPLX10 Instruction Manual PDF

Download download
Logik L90SPLX10 Instruction Manual PDF
Logik Manual Logik Splashback Manual Logik L90SPLX10 Manual Logik Splashback Instruction Manual
Pages 2
Year 0
Language(s)
English en
1 of 2
1 of 2

Summary of Content for Logik L90SPLX10 Instruction Manual PDF

Page 1

60cm / 90cm Wide Stainless Steel Splashback L60SPLX10 / L90SPLX10

Unpacking

Remove all items from the packaging. Retain the packaging. If you dispose of it please do so according to any local regulations. The following items are included:

Wall Mounting & Fixings

Depending on the material of your wall, it may be neccessary to use masonry anchors or hollow wall anchors when fixing the screws. In all cases, ensure that a secure fixing is obtained.

The included wall plugs are only suitable for use in masonry walls. If you are in any doubt about the correct wall plugs for your wall, seek professional advice. Failure of the product due to using incorrect fixings is the responsibility of the installer.

The Main Unit

Wall Plugs x 4 (8 x 40 mm)

Instruction Manual x 1

Screws x 4 (4 x 30mm)

Be careful when unpacking and installing the unit as the metal edges can cause injury if not handled with care.

If items are missing or damaged, please contact Partmaster (UK only). Tel: 0344 800 3456 for assistance.

Instruction Manual

Instruction Manual

L60_90SPLX10_IB_RC_160128_grace.pdf 1 28/1/16 11:36 am

Page 2

Always use a larger screw and wall plug if you are not sure. Ensure you use the recommended drill bit to match the wall plug and hole size. Ensure you drill the hole horizontally, do not force the drill or enlarge the hole. Take extra care when drilling high walls and ceramic tiles. Ensure wall plugs are inserted beyond the

thickness of the ceramic tiles to avoid the tiles splitting or cracking. Ensure wall plugs are well fitted and are a tight fit in the drilled hole. To prevent debris getting behind the splashback, we recommend the sides are sealed using wall tiles or a

suitable silicone sealant.

Installation

1. Carefully remove all packaging materials including the protective sheet. You may use a soft damp cloth to clean the surface and the edge of the splashback after removing the protective sheet.

2. Ensure that the surface of the wall is flat, and free of dust and dirt. 3. Place the splashback on the wall and mark the wall with a pencil through the holes in the splashback. 4. Drill 3 holes (hole dimension 8 x 45 mm) into the wall according to the diagrams below.

Care & Maintenance

Your splashback should be cleaned regularly using a proprietary cleaner.

Never use any sharp instruments or abrasive substances, soap, detergent or wax polish for cleaning.

L60SPLX10 L90SPLX10

2 people are required to lift the unit during assembly, it is recommended that gloves are worn.

250mm 250mm

400mm 400mm

Before drilling holes check that the wall is clear of any cables, pipes etc.

Make sure that the screws and wall plugs being used are suitable for supporting your unit. Consult a qualified technican if you are unsure.

5. Use the screws and wall plugs provided to fix the splashback. 6. Tighten the screws and press the splashback to the wall. 7. Any gaps between the benchtop and the wall must be sealed to exclude

moisture.

DSG Retail Ltd (co. no. 504877) 1 Portal Way, London, W3 6RS, UK

Visit Partmaster.co.uk today for the easiest way to buy electrical spares and

accessories. With over 1 million spares and accessories available we can deliver direct to your door the very next day. Visit www.partmaster.co.uk or call 0344 800 3456 (UK customers only). Calls charged at National Rate.

The symbol on the product or its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste

electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop o

Manualsnet FAQs

If you want to find out how the L90SPLX10 Logik works, you can view and download the Logik L90SPLX10 Instruction Manual on the Manualsnet website.

Yes, we have the Instruction Manual for Logik L90SPLX10 as well as other Logik manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a Logik L90SPLX10. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Logik L90SPLX10 Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Logik L90SPLX10 Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Logik L90SPLX10 Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Logik L90SPLX10 Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Logik L90SPLX10 Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.