Logik L90SPGB20 Installation Instructions and After Care Guide PDF

1 of 1
1 of 1

Summary of Content for Logik L90SPGB20 Installation Instructions and After Care Guide PDF

Splashback Installation instructions and after care guide

How to fit the glass splashback

2 people required to lift the unit during assembly. Care must be taken when handling this product. For your safety, we recommend that hands are protected from edges and corners.

Use and care

We recommend that you leave approximately 1mm around each edge of the splashback to allow for material expansion.

Apply a suitable adhesive to the rear surface of the splashback. Use a silicone, Grip Fill or similar product.

Start by using a spirit level to mark a level line 1mm below your cooker hood and all your kitchen units etc.

Storage 1. Prior to installation, items must be stored either at or absolutely

vertical. 2. Items must be stored at normal room temperature and humidity. 3. Avoid any contact with the rear painted surface with hard or

sharp objects.

Fitting 1. This splashback is designed to t on the wall behind your

range cooker. The wall should be at and clear of any obstructions.

2. Particular care should be taken in newly built areas to ensure plasterwork is fully dry and major works completed prior to installation.

3. Do not apply large force to the glass, this could damage the glass.

Maintenance 1. To maintain the best appearance, only use warm water and a

mild detergent ensuring that the surface is rinsed thoroughly and then dried with a soft cloth.

9090

1. 2. Apply the splashback to the wall and push rmly to the wall to ensure a good contact between the wall and the adhesive. The splashback will need to be supported during cure or dry to ensure it does not separate from the wall or move.

3.

Width Height 60cm Splashback 598mm 650mm 90cm Splashback 895mm 750mm

If you are to position the splashback o a stable surface then it must be supported while the adhesive se

Manualsnet FAQs

If you want to find out how the L90SPGB20 Logik works, you can view and download the Logik L90SPGB20 Installation Instructions and After Care Guide on the Manualsnet website.

Yes, we have the Installation Instructions and After Care Guide for Logik L90SPGB20 as well as other Logik manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Installation Instructions and After Care Guide should include all the details that are needed to use a Logik L90SPGB20. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Logik L90SPGB20 Installation Instructions and After Care Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Logik L90SPGB20 Installation Instructions and After Care Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Logik L90SPGB20 Installation Instructions and After Care Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Logik L90SPGB20 Installation Instructions and After Care Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Logik L90SPGB20 Installation Instructions and After Care Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.