Unpacking1 Operating Your Remote Control2
Power On4 DAB Operation5
Basic Operation7
Connecting the Speakers3
Setting the Clock Manually6
Quick Start Guide LHFDAB11
Remove all packaging from the unit. Retain the packaging. If you dispose of it please do so according to any local regulations.
(P.N.: 227-8060DN-123)
Hi-Fi with DAB Radio
Main Unit Speakers x 2 Remote Control
Instruction Manual Quick Start Guide
Remove the insulating mylar strip from the remote control if the battery is being used for the rst time. It is located at the bottom back side of the remote control.
For replacing the battery, please refer to the instruction manual.
Connect the speaker cables at the back of the speakers to the Speaker L/R sockets at the rear of the unit. (+: Black wire; : Black/White wire)
1 Connecting to the Mains Socket Connect the mains cable at the rear of the main unit to the mains socket.
2 Switching the Unit into Standby Mode Switch the POWER ON/OFF switch at the rear of the main unit to the ON position.
3 Switching the Unit ON Press the STANDBY/ON button on the remote control to switch the unit on.
If the unit is connected to the mains power, the ON/OFF switch at the rear is switched to the ON position and then press the STANDBY/ON button to switch the unit on for the rst time, the unit will automatically enter into the DAB mode and perform quick scan function. During the scan the display will show Searching together with a slide bar that indicates the progress of the scan and the amount of stations that have been found so far.
Once the scan has nished, the unit will select the rst alphanu- merically found station. To explore the found stations, press the SKIP/TUNE SEARCH buttons.
DAB FM AUX
CD
Tip: You will nd that there are many exciting features available.
To get to know all these features, please take some time to read the instruction manual provided.
Thank you for purchasing your new Logik Hi-Fi with DAB radio.
Please follow this quick start guide for a successful rst time set up.
We recommend that you spend some time reading this instruction manual in order to fully understand all the operational features it offers.
Read all the safety instructions carefully before use and keep this instruction manual for future reference.
FUNCTION
STANDBY/ON
UPDOWN
PLAY/PAUSE SCAN
STOP
MENU/INFO
SELECT/ FM MONO/ST.
PRESET /MEMORY
PRESET UP
PRESET DOWN
SKIP/TUNE SEARCH
VOLUME
MENU/INFO
REPEAT
SELECT/ MONO/ST.
SCAN
PRESET /MEMORY
CLOCK TIMER
INTROEQ
RANDOM
FUNCTION
SLEEP
MUTE +VOLUME
STANDBY/ON
PRESET
AC~
O N
O FF
ANT.
AUX IN
R L
R L
AC~
O N
O FF
ANT.
AUX IN
R L
MENU/INFO
REPEAT
SELECT/ MONO/ST.
SCAN
PRESET /MEMORY
CLOCK TIMER
INTROEQ
RANDOM
FUNCTION
SLEEP
MUTE +VOLUME
STANDBY/ON
PRESET
2
1
To Mains socket
main unit
O N
O FF
If you cannot received any DAB stations you will need to manually set the clock.
MENU/INFO
REPEAT
SELECT/ MONO/ST.
SCAN
PRESET /MEMORY
CLOCK TIMER
INTROEQ
RANDOM
FUNCTION
SLEEP
MUTE +VOLUME
STANDBY/ON
PRESET
FUNCTION
Selecting Modes Press the FUNCTION button repeatedly to switch between modes (DAB, FM, CD or AUX).
When the clock is set, during ON mode press the CLOCK button on the remote control, the current time will show on the display for 5 seconds.
AC~
O N
O FF
ANT.
AUX IN
R L
MENU/INFO
REPEAT
SELECT/ MONO/ST.
SCAN
PRESET /MEMORY
CLOCK TIMER
INTROEQ
RANDOM
FUNCTION
SLEEP
MUTE +VOLUME
STANDBY/ON
PRESET
O N
O FF
CLOCK
SELECT/ MONO/ST.
SCAN
Press the STANDBY/ON button on the remote control to switch the unit back to STANDBY mode.
1. While in STANDBY mode, press the CLOCK button on the remote control and the hour digits will ash on the display.
2. Press the SKIP/TUNE SEARCH buttons to adjust the hour digits, and then press the CLOCK button on the remote control to conrm. The minute digits will ash on the display.
3. Press the SKIP/TUNE SEARCH buttons to adjust the minute digits, and then press the CLOCK button on the remote control to conrm. The clock setting is now complete.
MENU/INFO
REPEAT
SELECT/ MONO/ST.
SCAN
PRESET /MEMORY
CLOCK TIMER
INTROEQ
RANDOM
FUNCTION
SLEEP
MUTE +VOLUME
STANDB