Logik L37SPDB14 Instruction Manual PDF

1 of 24
1 of 24

Summary of Content for Logik L37SPDB14 Instruction Manual PDF

Instruction Manual

Sound Stage L37SPDB14

Contents

Safety Warnings .............................................................................................................................3

Unpacking ......................................................................................................................................5

Product Overview ..........................................................................................................................6

Front View .................................................................................................................................................................. 6

Top View ..................................................................................................................................................................... 6

Rear View ................................................................................................................................................................... 6

Remote Control ..............................................................................................................................7

Remove the Plastic Strip from the Remote Control ....................................................................8

Battery Replacement for the Remote Control .............................................................................8

Remote Control Operation Range ..............................................................................................10

Placing TV or Monitor..................................................................................................................10

Connections .................................................................................................................................11

Using the OPTICAL Connection .......................................................................................................................11

Using the AUX Connection................................................................................................................................11

Using the DAB Aerial Connection ...................................................................................................................12

Using the MP3 LINK Connection .....................................................................................................................12

Connecting to the Mains Supply.....................................................................................................................13

General Operation .......................................................................................................................14

Selecting Modes ....................................................................................................................................................14

Adjusting the Volume..........................................................................................................................................14

Selecting the Equaliser .......................................................................................................................................14

Adjusting the Brightness....................................................................................................................................14

DAB Operation .............................................................................................................................15

Auto scan .................................................................................................................................................................15

Secondary Services ..............................................................................................................................................15

Manual Tuning .......................................................................................................................................................15

Presetting Stations ...............................................................................................................................................16

Recalling a Preset Station...................................................................................................................................16

DRC (Dynamic Range Control) .........................................................................................................................16

System Reset ..........................................................................................................................................................16

DAB Display Modes ..............................................................................................................................................17

FM Operation ...............................................................................................................................19

Bluetooth Operation .................................................................................................................20

Listen to Music from Bluetooth Device ......................................................................................................21

AUX / MP3 LINK / OPTICAL Operation ........................................................................................21

Maintenance ................................................................................................................................21

Hints and Tips ..............................................................................................................................22

Specifications ...............................................................................................................................23

3

Read all the instructions carefully before using the unit and keep them for future reference.

Retain the manual. If you pass the unit onto a third party make sure to include this manual.

Check that the voltage marked on the rating label matches your mains voltage.

Damage Please inspect the unit for damage after

unpacking. Do not continue to operate the unit if you

are in any doubt about it working normally, or if it is damaged in any way - switch off, withdraw the mains plug and consult your dealer.

Location of Unit The unit must be placed on a flat stable

surface and should not be subjected to vibrations.

Do not place the unit on sloped or unstable surfaces as the unit may fall off or tip over.

The mains socket must be located near the unit and should be easily accessible.

This unit is designed for indoor use only.

Temperature Avoid extreme degrees of temperature,

either hot or cold. Place the unit well away from heat sources such as radiators or gas/ electric fires.

Avoid exposure to direct sunlight and other sources of heat.

Naked Flames Never place any type of candle or naked

flame on the top of or near the unit.

Ventilation To prevent the risk of electric shock or

fire hazard due to overheating, ensure that curtains and other materials do not obstruct the ventilation vents.

A minimum distance of 5cm around the unit should be maintained to allow for sufficient ventilation.

Do not install or place this unit in a bookcase, built-in cabinet or in another confined space. Ensure the unit is well ventilated.

Safety Warnings

Safety Always disconnect the unit from the mains

supply before connecting/ disconnecting other devices or moving the unit.

Unplug the unit from the mains socket during a lightning storm.

Mains Cable Make sure the unit or unit stand is not

resting on top of the mains cable, as the weight of the unit may damage the mains cable and create a safety hazard.

If the mains cable is damaged it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.

Interference Do not place the unit on or near appliances

which may cause electromagnetic interference. If you do, it may adversely affect the working of the unit, and cause a distorted sound.

Batteries Batteries used in the unit are easily

swallowed by young children and this is dangerous.

Keep loose batteries away from young children and make sure that the battery holder tray is secure in the unit. Seek medical advice if you believe a cell has been swallowed.

Please dispose of batteries correctly by following the guidance in this manual.

Do not expose the battery to direct sunlight or sources of excessive heat.

Supervision Children should be supervised to ensure

that they do not play with the unit. Never let anyone especially children push

anything into the holes, slots or any other openings in the case - this could result in a fatal electric shock.

4

CAUTION RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the units enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the manual accompanying the unit.

Service To reduce the risk of electric shock, do not

remove screws. The unit does not contain any user-serviceable parts. Please leave all maintenance work to qualified personnel.

Do not open any fixed covers as this may expose dangerous voltages.

Maintenance Ensure to unplug the unit from the power

supply before cleaning. Do not use any type of abrasive pad or

abrasive cleaning solutions as these may damage the units surface.

Do not use liquids to clean the unit.

5

Unpacking

Remove all items from the packaging. Retain the packaging. If you dispose of it please do so according to local regulations.

The following items are included:

Thank you for purchasing your new Logik Sound Stage. We recommend that you spend some time reading this instruction manual in order that you fully understand all the operational features it offers. You will also find some hints and tips to help you resolve any issues. Read all the safety instructions carefully before use and keep this instruction manual for future reference.

If items are missing, or damaged please contact Partmaster (UK only). Tel: 0344 800 3456 for assistance.

Remote Control

RCA to RCA Stereo Audio Cable

Mains Cable

3.5mm to 3.5mm Audio Cable

Instruction Manual

Main Unit

Aerial

MUTESCAN VOL +

/OK

EQ VOL

SOURCE

DIMPAIR PROG

MENU INFO

Instruction Manual

6

Product Overview

Front View

Top View

Rear View

1. Speakers

2. POWER Indicator

3. Display

1. Button

2. SOURCE Button

3. / PAIR Button

1. AC~ Socket

2. DAB Socket

4. Remote Control Sensor

5. Subwoofer

4. VOL Button

5. VOL + Button

6. MP3 LINK Socket

3. AUX (L/R) Sockets

4. OPTICAL Socket

21 13 4

5

SOURCE / PAIR VOL VOL +

MP3 LINK

AC~ AUX

DAB R

L

OPTICAL

1 2 3 4 5 6

1 32 4

7

MUTESCAN VOL +

/OK

EQ VOL

SOURCE

DIMPAIR PROG

MENU INFO

1

3 4

2

5 6 7

8

11

13

15

9

14

16

12

10

Remote Control

1. Button Switch the unit between On and Standby mode.

2. SCAN Button Scan for radio stations automatically in DAB or FM mode.

3. EQ Button Select the preset equalisers.

4. /OK Button Play/pause/resume playback in BT

mode. Confirm the selection on a menu

screen.

5. Button Skip backwards to the beginning of

the track or to the previous track in BT mode.

Search for a radio station in DAB or FM mode.

Select an item on a menu screen in DAB mode.

6. Button Skip forwards to the next track in BT

mode. Search for a radio station in DAB or

FM mode. Select an item on a menu screen in

DAB mode.

7. MENU Button Display menu screen.

8. PAIR Button Access Bluetooth function in BT mode.

9. SOURCE Button Select the input source.

10. MUTE Button Silence the unit or restore the sound.

11. VOL +/ Buttons Adjust the volume.

12. Button Select a preset station in DAB or FM mode.

13. INFO Button Display the radio station information.

14. Button Select a preset station in DAB or FM mode.

15. PROG Button Preset radio stations.

16. DIM Button Adjust the display brightness level.

8

Battery Replacement for the Remote Control

The remote control requires a CR2025, 3V Lithium battery.

1. Slide and hold the battery release tab in the direction of the arrow.

2. Pull out the battery holder and remove the old battery.

3. Replace with a new battery.

4. Insert the battery holder back into the remote control.

Remove the Plastic Strip from the Remote Control

Remove the plastic strip from the battery if the battery is being used for the first time. It is located at the bottom rear of the remote control.

9

Handling the Battery Improper or incorrect use of batteries may cause corrosion or battery leakage,

which could cause fire, personal injury or damage to property. Install the battery correctly in the battery compartment. When the battery is exhausted, the remote control will not function. Only use the battery type indicated in this manual. Do not dispose of the used battery as domestic waste. Dispose of it in

accordance with local regulations. Small button cell batteries such as the one used in the remote control are

easily swallowed by young children and this is dangerous. Keep loose button cells away from young children and make sure that the battery is secure in the remote control. Seek medical advice if you believe a battery cell has been swallowed.

Handling the Remote Control Take care of your fingernails when you slide and pull the battery release tab. Do not drop the remote control. Do not allow anything to impact the remote control. Do not spill water or liquid on the remote control. Do not place the remote control on a wet object. Remove the battery from the remote control when not in use for a long period

of time, as corrosion or battery leakage may occur and result in physical injury, and/or property damage, and/or fire.

10

Remote Control Operation Range

The remote control sensor at the front unit is sensitive to the remote controls commands up to a maximum of 6 metres away and within a maximum of a 40 arc.

Please note that the operating distance may vary depending on the brightness of the room. 20 20

Max. 6 m

Placing TV or Monitor

The unit supports a TV up to a maximum dimension of 48 cm (W) x 22 cm (D) for its base and within a maximum load of 30 kg.

Ensure the TV is placed properly. Turning the volume up too loud may cause the TV to vibrate and fall over.

MUTESCAN VOL +

/OK

EQ VOL

SOURCE

DIMPAIR PROG

MENU INFO

Maximum dimension of the TV base: 48 cm (W) x 22 cm (D)

11

AC~ AUX

DAB R

L

OPTICAL

AUX

R

L

OPTICAL

AC~ AUX

DAB R

L

OPTICAL

AC~ AUX

R

L

OPTICAL

DAB

Connections

Using the OPTICAL Connection Use an optical cable (not included) to connect the TVs optical outputsocket to the units OPTICAL socket. Before inserting the optical cable, remove the OPTICAL socket cover.

OPTICAL cable (not included)

RCA to RCA Stereo Audio Cable

Using the AUX Connection Use the RCA to RCA Stereo Audio Cable to connect the audio output sockets of a TV or an audio device to the AUX (L/R) Sockets of the unit. Please ensure that the output volume is turned up in order for the soundbar to operate.

Rear view of the unit

Rear view of the unit

If there is no sound output and the display shows PLEASE CHANGE YOUR SOURCE DEVICE TO PCM MODE UNDER AUDIO OUTPUT SETTING, ensure the audio setting of the input source (e.g. TV, game console, DVD player, etc.) is set to PCM mode.

TV

Audio device

red (R)

white (L)

Audio out

When the unit is connected with the TV, press the EQ Button to select for the optimal sound output effect. Refer to Selecting the Equaliser section for details.

12

SOURCE / PAIR VOL VOL +

MP3 LINK

AC~ AUX

R

L

OPTICAL

DAB

Using the MP3 LINK Connection Use the 3.5mm to 3.5mm audio cable to connect the audio devices headphone socket to the units MP3 LINK socket.

Using the DAB Aerial Connection Connect one end of the aerial (included) to the DAB socket at the rear of the unit. Then position the aerial to obtain optimum reception.

3.5mm to 3.5mm audio cable

Top view of the unit

Audio device

13

Connecting to the Mains Supply Ensure that the power supply voltage corresponds to the voltage printed on the back

or the underside of the unit.

This unit is designed to operate with the provided mains cable.

Connecting the unit to any other power source may damage the unit. Unwind the mains cable to its full length.

Connect the end of the mains cable to the AC ~ Socket at the rear of the unit.

Connect the mains plug to the mains socket. Make sure the mains plug is firmly inserted into the mains socket.

Ensure all audio connections of the unit are connected before connecting to the mains power socket.

Unplug the power cord from the outlet when the unit is not in use for an extended period of time.

To the mains socket

AC~ AUX

R

L

OPTICAL

DAB

14

General Operation

When you first connect the unit to the mains socket, the unit will be in Standby mode. The POWER indicator will light up red.

Press to switch the unit on. The display will show a greeting message HELLO and then the last used mode.

Press to switch the unit back to Standby mode. The display will show STANDBY and then turn off. The POWER indicator will light up red.

Disconnect the mains plug from the mains socket if you want to switch the unit off completely.

The eco-friendly technology will switch this device to Standby mode automatically when the input device volume is too low or muted for 15 minutes. The device can be reactivated by pressing Standby button and turning up the input device volume. Except for Optical mode, the eco-friendly control will switch the device to standby mode automatically when there is no input signal for 15 minutes.

Selecting Modes Press SOURCE repeatedly to switch between DAB, FM, AUX, BT, MP3 LINK and OPTICAL mode.

Adjusting the Volume Press VOL +/ to adjust the volume.

If you wish to turn the sound off, press MUTE on the remote control. Press MUTE again or press VOL +/- to resume normal listening.

If the unit is connected with an external device, you may also adjust the volume of the input source for volume control.

Selecting the Equaliser Press EQ on the remote control repeatedly to select a desired equaliser setting (DEFAULT, MOVIE, MUSIC, TV).

When AUX or OPTICAL mode is selected, the equaliser will be set to MOVIE.

When DAB, FM, BT or MP3 LINK mode is selected, the equaliser will be set to MUSIC.

Adjusting the Brightness Press DIM on the remote control repeatedly to select brightness level.

15

DAB Operation

Auto scan The auto scan will search for the entire DAB Band III channels. When DAB mode is selected, the unit will start an auto scan. You may also follow the steps below to run a auto scan manually:

1. While in DAB mode, press the / PAIR Button on the unit or the SCAN Button on the remote control to perform a full scan.

OR

Press MENU on the remote control to enter the DAB Menu. Press / to select FULL SCAN, and then press /OK on the remote control to confirm.

2. The display will show Scan . This may take a few minutes, depending on the number of stations found.

After the scan has finished, the first alphanumerically found station will be selected and all the stations that have been found will be stored automatically. To explore the found stations, press / and then /OK on the remote control to confirm.

Running a full scan will clear all the DAB stations previously found.

Secondary Services You may see a > symbol after the name of the primary station whilst exploring the found stations by pressing /. This indicates that there are secondary services available to that station. These secondary services contain extra services that are related to the primary station. e.g. a sports station may want to add extra commentaries. The secondary services are inserted directly after the primary station in the station list.

To select the secondary station, press / until you find the secondary service and press /OK on the remote control to confirm. When the secondary service ends, the unit will automatically switch back to the primary station.

Manual Tuning You can also manually tune the receiver. This can help when aligning your aerial or when adding stations that were missed while auto tuning.

1. Press MENU and then / on the remote control to select MANUAL. Press /OK on the remote control to confirm.

2. Press / on the remote control to scroll through the DAB channel frequency.

3. After your desired channel frequency is selected, press /OK on the remote control to confirm. The display will now show the frequency signal strength bar.

4. If a signal is detected, the station will be saved in the station list.

16

Presetting Stations You can store up to 20 of your favourite DAB stations to the memory. This will enable you to access your favourite stations quickly and easily.

1. To store a preset, you must first be listening to the station that you would like to save, press the PROG Button on the remote control. The display will show ## EMPTY, and the preset number will flash.

2. Press the / Button on the remote control to select your desired station preset number.

3. Press the PROG Button to confirm your station, the display will show STORED.

Recalling a Preset Station Once you have saved a station, you can recall it by pressing the / Button on the remote control to select your desired preset number. Press the /OK Button to confirm.

After storing the preset stations, they will be saved into the memory and power off will not erase them. Running a full scan will not replace the preset stations in the memory.

Storing a new station in a preset location will erase the previously stored station in that location.

DRC (Dynamic Range Control) Dynamic Range Control is an advanced technology that reduces the difference in volume between stations when switching stations.

1. In DAB mode, press the MENU Button on the remote control and then the / Button to select DRC. Press the /OK Button to confirm.

2. Press the Button to select DRC HIGH, LOW or OFF. Press the /OK Button to confirm the setting.

System Reset There may be times when you need to reset your unit back to the factory settings especially when you have moved house. If you experience reception problems you may want to reset and try again. If you move to another part of the country and pick up the local and national DAB stations in that area, your previously tuned channels may no longer be available.

1. In DAB mode, press the MENU Button on the remote control and then the / Button to select SYSTEM. Press the /OK Button to confirm.

2. Press / on the remote control to select RESET. Press /OK on the remote control to confirm. The display will show RESET N. Press / on the remote control to select RESET Y. Press /OK on the remote control to confirm. The display will show RESTART and then WELCOME. The unit will perform a full scan and the display will show Scan .

17

DAB Display Modes Every time you press the INFO button, the bottom line of the display will cycle through the following display modes.

DLS (Dynamic Label Segment) Dynamic label segment is a scrolling message that the broadcaster may include with their transmissions. The message usually includes information, such as programme details etc.

Signal Strength The display will show a slide bar to indicate the signal strength, the stronger the signal, the longer the bar will be from left to right.

Programme Type This describes the STYLE or GENRE of music that is being broadcast e.g. ROCK or CLASSICAL.

Ensemble Name An Ensemble/multiplex is a collection of radio stations that are bundled and transmitted on one frequency. There are national and local multiplexes. Local ones contain stations that are specific to that area.

DAB unlike normal radio, groups together several radio stations and transmits them on one frequency.

Channel Number DAB digital radio can be broadcast on a wide number of frequencies. A number of channels have been allocated (5A-13F). Refer to the table in p.18-19 for details.

Frequency The frequency of the present station will be displayed.

Error in Signal A number showing the error rate. If the number is 0, it means the signal received is error free and the signal strength is strong. If the error rate is high, it is recommended to reorient the radio aerial or reposition the unit.

Bitrate The display will show the digital audio bit rate being received.

Mode The display will show DAB or FM mode.

Date and Clock The broadcaster (Radio station) provides clock and date information automatically so theres no need to manually set this information. If the information is not available, the display will show NO CLOCK and NO DATE.

Ensemble Name

Channel Number

Frequency

Error in signal

Signal Strength

DLS

Programme Type

Bitrate

Clock

Mode

Date

18

DAB channels

Channel number Channel Frequency

5A 174.928 MHz

5B 176.640 MHz

5C 178.352 MHz

5D 180.064 MHz

6A 181.936 MHz

6B 183.648 MHz

6C 185.360 MHz

6D 187.072 MHz

7A 188.928 MHz

7B 190.640 MHz

7C 192.352 MHz

7D 194.064 MHz

8A 195.936 MHz

8B 197.648 MHz

8C 199.360 MHz

8D 201.072 MHz

9A 202.928 MHz

9B 204.640 MHz

9C 206.352 MHz

9D 208.064 MHz

10A 209.936 MHz

10B 211.648 MHz

10C 213.360 MHz

10D 215.072 MHz

11A 216.928 MHz

11B 218.640 MHz

11C 220.352 MHz

11D 222.064 MHz

12A 223.936 MHz

12B 225.648 MHz

12C 227.360 MHz

12D 229.072 MHz

13A 230.784 MHz

13B 232.496 MHz

19

FM Operation

Auto Scan and Save Preset Station 1. Press the SOURCE Button repeatedly on the unit or on the remote control to select FM

mode.

2. Press the SCAN Button on the remote control to activate automatic programming. All available stations are programmed in the order of waveband reception strength.

The first programed radio station is played automatically.

Tune to a Preset Radio Station Press the / Button to select a preset number that you want. Press the /OK Button

to confirm.

Tuning in a Station Tune in radio stations automatically

Press the / PAIR Button on the unit or press and hold the / Button, the frequency changes down or up automatically until a station is found.

The search may not stop at a station with a very weak signal.

Tune in radio stations manually Press the /Button repeatedly until you find the station you want.

Presetting Stations Manually You can preset up to 20 FM stations.

1. Tune in the desired station, then press the PROG Button.

2. Press the / Button to select the preset number.

3. Press the PROG Button to store the station.

4. Repeat above steps 1 to 3 for each station you want to store in memory with a preset number.

If reception is still poor, try to adjust the position of the aerial or try to move the unit to another location while the unit is in FM or DAB mode.

The unit will automatically synchronise with the clock of the radio station every hour. After synchronisation, press the Button on the unit or remote control and a time clock will show on the display. If the unit is idle for a further 90 seconds, the unit will enter Standby mode.

13C 234.208 MHz

13D 235.776 MHz

13E 237.488 MHz

13F 239.200 MHz

20

Bluetooth Operation

You can listen to tracks from a media device if it is connected to the unit via Bluetooth.

The operational range between the main unit and a Bluetooth device is approximately 8 meters.

Before you connect a Bluetooth device to this unit, familiarize yourself with the Bluetooth capabilities of the device.

Compatibility with all Bluetooth devices is not guaranteed. Any obstacle between this unit and a Bluetooth device can reduce the

operational range. Keep this unit away from other electronic devices that may cause interference.

To connect your device to the unit via Bluetooth, follow the steps below:

1. Switch the unit on. Press the SOURCE Button on the remote control repeatedly to select BT mode. The display will show BT and then BT READY.

2. Press and hold the /PAIR Button on the unit or the PAIR Button on the remote control to activate Bluetooth pairing.

3. Thedisplaywill show DISCONNECT twice and then BT READY when searching for Bluetooth devices.

4. Activate your Bluetooth device and select the search mode.

5. L37SPDB14 will appear on your Bluetooth device list.

6. Select L37SPDB14 and enter 0000 for the password if necessary.

7. The display will show PAIRED when connection is successful.

8. To disconnect the Bluetooth function, switch to another function on the unit or disable the function from your Bluetooth device.

If the signal strength is weak, your Bluetooth receiver may disconnect, but it will re-enter pairing mode automatically.

For better signal reception, remove any obstacles between the unit and the Bluetooth device.

This unit supports A2DP (Advanced Audio Distribution Profile) and AVRCP (Audio Video remote Control Profile) functions. This can only be paired with one Bluetooth device at one time.

Compatibility with all devices and media types is not guaranteed. Some mobile phones with the Bluetooth function may connect and

disconnect as you make and end calls. This is not an indication of a problem with your unit.

21

Maintenance

To clean the unit, wipe the case with a slightly moist, lint-free cloth.

Do not use any cleaning fluids containing alcohol, ammonia or abrasives.

Do not spray aerosol at or near the unit.

Ensure the unit is fully unplugged from the mains socket before cleaning.

Listen to Music from Bluetooth Device If the connected Bluetooth device supports Advanced Audio Distribution Profile

(A2DP), you can listen to the music stored on the device through the player.

If the device also supports Audio Video Remote Control Profile (AVRCP), you can use the players remote control to play music stored on the device.

1. Pair your device with the player.

2. Play music via your device (if it supports A2DP)

3. Use supplied remote control to control play (if it supports AVRCP)

To pause/resume play, press the Button.

To skip to a track, press the Button.

When connecting the external audio device, refer to the owners manual of the external device, as well as the manual.

Examples of External Audio Device that can be connected to the unit are: Portable MP3 Players, Cassette Players, Mini Disc Players, DVD Players, etc.

AUX / MP3 LINK / OPTICAL Operation

1. Ensure that the unit is connected to the TV or audio device.

2. Press the SOURCE Button repeatedly to select the desired mode.

3. Press the VOL+/ Button to adjust the volume.

4. Press the EQ Button on the remote control to select the desired equaliser.

22

Hints and Tips

If a problem occurs, it may often be due to something very minor. The following table contains various tips.

Problem Solution

No power. Ensure the mains cable is connected securely. Make sure that the unit is switched on.

Loud hum or noise is heard.

The plugs and sockets are dirty. Wipe them with a cloth slightly moistened with an appropriate non-abrasive cleaning solution.

The remote control does not function.

Use the remote control near the unit. Point the remote control at the remote control sensor on the

unit. Replace the battery in the remote control with a new one. Remove any obstacles between the remote control and the

unit.

The unit does not respond when pressing any buttons.

The unit may freeze up during use. Switch the unit off and then on again at the mains socket to reset the unit.

No sound output. Make sure that the unit is not muted. Press MUTE or VOL +/- to resume normal listening.

Ensure the audio setting of the input source (e.g. TV, game console, DVD player, etc.) is set to PCM mode while using optical connection.

I cannot find L37SPDB14 on my Bluetooth device.

Ensure the Bluetooth function is activated on your Bluetooth device.

The sound output effect sounds unfamiliar.

Press the EQ Button on the remote control to select preset EQ mode for the optimal sound output effect.

If any functional abnormality is encountered, unplug the unit from the mains socket and reconnect it again.

23

Specifications

Model L37SPDB14

Power

Power Supply 220-240V~ 50/60Hz

Power Consumption 18W

Speaker Output Power 15Wrms x 2 + 30Wrms (Subwoofer)

Feature

Connectivity AUX IN (L/R) Sockets, MP3 LINK Socket, OPTICAL Socket, Bluetooth 3.0, FM, DAB

Frequency FM 87.5-108 MHz DAB 174.92 - 239.2 MHz

Dimension (W) x (D) x (H) 525 x 305 x 75 mm

Net Weight 4.4kg

Features and specifications are subject to change without prior notice.

DSG Retail Ltd. (co. no. 504877) Maylands Avenue, Hemel Hempstead, Herts., HP2 7TG, UK

IB-L37SPDB14-150203V3

All trademarks are the property of their respective owners and all rights are acknowledged.

The symbol on the product or its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste for recycling, please contact your local authority, or where you purchased your product.

Notes for battery disposal The batteries used with this product contain chemicals that are harmful to the environment. To preserve our environment, dispose of used batteries according to your local laws or regulations. Do not dispose of batteries with normal household waste. For more information, please contact the local authority or your retailer where you purchased the product.

The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by DSG Retail Limited is under license. Other trademarks and trade names are those of their respective owners and all rights are acknowledged.

For general information about this appliance and handy hints and tips, please visit

www.knowhow.com/knowledgebank or call 0344 5611234.

In the unlikely event of a problem developing, please contact the store where you purchased your equipment. We continually strive to improve our products; specifications may change without prior notice. For ad

Manualsnet FAQs

If you want to find out how the L37SPDB14 Logik works, you can view and download the Logik L37SPDB14 Instruction Manual on the Manualsnet website.

Yes, we have the Instruction Manual for Logik L37SPDB14 as well as other Logik manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a Logik L37SPDB14. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Logik L37SPDB14 Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Logik L37SPDB14 Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Logik L37SPDB14 Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Logik L37SPDB14 Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Logik L37SPDB14 Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.