Logik LM212V Quick Start Guide PDF

1 of 2
1 of 2

Summary of Content for Logik LM212V Quick Start Guide PDF

2 Product Overview

1 Unpacking

Connect the USB Receiver

3 Installing the Batteries

Wireless Optical Mouse Quick Start Guide

LM212R LM212B LM212V LM212O LM212P

Wireless Optical Mouse Quick Start Guide

LM212R LM212B LM212V LM212O LM212P

RF Receiver (PN.: MRN)

Quick Start Guide (PN.: LM212R_B_V_O_P-001)

AAA Batteries x 2Mouse

Remove all packaging from the unit. Retain the packaging. If you dispose of it, please do so according to the local regulations. The following items are included:

If items are missing or damaged, please contact Partmaster (UK only). Tel: 0844 800 3456 for assistance.

Thank you for purchasing your new Logik Wireless Optical Mouse. Please familiarise yourself with this Quick Start Guide to enjoy all the exciting features oered.

4 Plug the RF receiver directly into your computers USB port.

Open the battery cover then take the RF receiver out.

Battery Cover Batteries X 2

1st2nd

Slide the battery cover o and insert 2 x AAA batteries. Close the battery cover. Ensure batteries are inserted with the correct polarities.

Scroll Wheel

Left Mouse Button

Right Mouse Button

C

M

Y

CM

MY

CY

CMY

K

LM212R_B_V_O_P QSG_120505.pdf 1 05/06/2012 3:45 PM

5 Activate the Wireless Mouse 6 Troubleshooting 7 Safety Warnings

Visit Partmaster.co.uk today for the easiest way to buy electrical spares and accessories. With over 1 million spares and accessories available we can deliver direct to

your door the very next day. Visit www.partmaster.co.uk or call 0844 800 3456 (UK customers only) Calls charged at National Rate.

DSG Retail Ltd. Maylands Avenue Hemel Hempstead Herts HP2 7TG England

(P.N.: LM212R_B_V_O_P-001)

This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed at the end of its life separately from your household waste. There are separate collection systems for recycling in the EU. For more information, please contact the local authority or your retailer where you purchased the product.

Mouse or Keyboard Not Working:

1. Check that the power switch is in the ON position.

2. Make sure the Nano Receiver is plugged into a USB port and the computer is on or try the Nano Receiver in a dierent USB port.

3. Check battery installation. Replace the batteries if needed.

4. If mouse performance is slow or intermittent around a wireless network, unplug the Nano Receiver from the USB port and then reinsert it. Switch the ON/OFF button again on the bottom of the mouse to reactivate it. Repeat the connection procedure. You can also try moving the mouse closer to the Nano Receiver.

5. If the mouse is moving erratically change the working surface the mouse is operating on.

To reduce the risk of injury : Keep batteries out of the reach of children. Do not heat, open, puncture, mutilate, or dispose of batteries in fire. Do not mix new and old batteries or batteries of dierent types Do not allow metal objects to touch the battery terminals on the

device; they can become hot and cause burns.

Battery-Powered Devices : Improper use of batteries may result in battery uid leakage, overheating, or explosion. Leaked battery uid is corrosive and may be toxic. It can cause skin and eye burns, and is harmful if swallowed.

Optical : Never point the optical sensor towards the face, particularly the eyes, to avoid possible injury.

Wireless Devices : Before boarding any aircraft or packing a wireless device in luggage that will

be checked in, remove the batteries from the wireless device. Wireless devices can transmit radio frequency (RF) energy, whenever

batteries are installed and the wireless device is turn on.

While the mouse is in use, the optical light is visible to the naked eye. Be careful not to look directly into the emitter hole while the mouse is active.

Features and specifications are subject to change without prior notice. Windows is a registered trademark of Microsoft Corporation in the United States and other countries.

DSG International Sourcing declares that the wireless keyboard and mouse comply with the essential requirements and other relevant provisions of Directive 1999/5/EC.

Notes for battery disposal: The batteries used with this product contain chemicals that are harmful to the environment. To preserve our environment, disposal of used batteries according to your local laws or regulations. Do not dispose of batteries with the normal household waste. For more information, please contact the local authority or your retailer where you purchased the product.

1. Switch the ON/OFF button to power on the mouse.

2. If the mouse does not respond, use a blunt pencil to press the Connect button to activate the connection between the mouse and the RF receiver. If the mouse does not work after 10 seconds, pair them again. (The receiver has an auto pairing function.)

When the mouse

Manualsnet FAQs

If you want to find out how the LM212V Logik works, you can view and download the Logik LM212V Quick Start Guide on the Manualsnet website.

Yes, we have the Quick Start Guide for Logik LM212V as well as other Logik manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Quick Start Guide should include all the details that are needed to use a Logik LM212V. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Logik LM212V Quick Start Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Logik LM212V Quick Start Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Logik LM212V Quick Start Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Logik LM212V Quick Start Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Logik LM212V Quick Start Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.