Contents

Linksys RE3000W V2 RE4100W N300 N600 PRO User Guide PDF

1 of 68
1 of 68

Summary of Content for Linksys RE3000W V2 RE4100W N300 N600 PRO User Guide PDF

Model # RE3000W V2/RE4100W

Table of Contents RE4100W (N600) .................................................................................................. 3

Product Overview .................................................................................................................................. 3 How to Install the Range Extender .................................................................................................. 4 Special FeatureMusic Streaming ................................................................................................ 7 iOS .............................................................................................................................................................. 7 Android* ..................................................................................................................................................... 8 Windows .................................................................................................................................................... 8 Mac OS X .................................................................................................................................................. 9

How to Access the Settings Interface ........................................................ 10

Using Range Extender Settings .................................................................... 11

Using Wi-Fi Protected Setup ........................................................................ 12

Wi-Fi Protected Setup light activity ............................................................................................ 12 Connecting the range extender to an existing access point or router ............................ 12 Connecting devices to your network through the range extender ................................... 14

How to Use Site Survey .................................................................................... 16

Troubleshooting .................................................................................................. 17

You cannot get your range extender connected ..................................................................... 17 Your Wi-Fi coverage isnt meeting expectations ..................................................................... 17 You cannot access your range extender .................................................................................... 17 You have intermittent connection problems ............................................................................ 19

RE3000W V2 (N300) ........................................................................................ 20

Product Overview ............................................................................................................................... 20

How to Install the Range Extender ............................................................... 22

How to Access the Settings Interface ........................................................ 23

Using Range Extender Settings .................................................................... 24

Using Wi-Fi Protected Setup ........................................................................ 25

Wi-Fi Protected Setup light activity ............................................................................................ 25 Connecting the range extender to an existing access point or router ............................ 25 Connecting devices to your network through the range extender ................................... 27

How to Use Site Survey .................................................................................... 29

Specifications ...................................................................................................... 30

RE4100W ............................................................................................................................................. 30 Environmental ...................................................................................................................................... 30 RE3000W V2 ...................................................................................................................................... 31 Environmental ...................................................................................................................................... 31

RE4100W (N600)

Product Overview Front view

The light on the front of the range extender gives you information about power, updating and signal strength.

Power Light Status/ description Blinking Green Booting up.

Resetting to factory defaults.

Upgrading firmware.

Solid Green Ready to use.

Solid Amber Weak connection with the router.

Fix: Unplug the extender, and move it closer to the router.

Blinking Amber Not connected to the router or other error.

Fix: Unplug the extender, plug it back in,

wait two minutes, reconnect to your network.

3

Side view

Audio Jack (1) Wi-Fi Protected Setup Button (2)Use Wi-Fi Protected Setup to automatically and

securely add compatible wireless devices to your network. Refer to Using Wi-Fi Protected Setup on page 12.

Reset Button (3)Press and hold until the power light on the front of the range extender blinks to reset to factory defaults. You can also restore the defaults from the Administration > Factory Defaults screen in the extenders settings interface (page 10).

Bottom view

EthernetConnect wired devices to your wireless network with Ethernet (network) cables. The green light turns on when an Ethernet device is connected and active on this port. The light blinks when the extender is sending or receiving data over the Ethernet port.

How to Install the Range Extender 1. Plug in the range extender

4

Plug in the range extender midway between your router and the area without Wi-Fi. Using your mobile device or laptop, be sure you have at least two bars (around 50%) of your routers Wi-Fi signal at that location. The setup software will help you find the right place if you have trouble.

2. Wait for a solid light It could take up to a minute for the light on the front of the range extender to stop blinking.

5

3. Connect to the range extender On a computer, phone or tablet, connect to the Wi-Fi network Linksys Extender Setup.

4. Launch setup

Enter http://extender.linksys.com in a browser and follow the on-screen instructions to set up your range extender.

TIPS You can also connect the range extender by using Wi-Fi Protected Setup. For more

information, see Using Wi-Fi Protected Setup on page 12. After setup use the extenders settings interface to change any settings. If connected to

your range extender go to extender.linksys.com.

6

Special Feature-----Music Streaming Stream music through your N600 PRO range extender to connected speakers

iOS Connect iOS device to the same Wi-Fi network as your range extender. Swipe up from the bottom of your screen. Tap on Linksys Range Extender.

7

Android* Connect Galaxy device to the same Wi-Fi network as your range extender. Select Music app Choose music file and tap Screen Mirroring icon Choose Linksys Range Extender.

Windows

Open Windows Media Player Right-click on a music file and choose Linksys Range Extender

Your screen might look different depending on your

device model and version of Android.

* For other Android devices, stream music with MediaHouse, UPnPlay, ArkMC, BubbleUPnP,

Pixel Media, and 2Player 2.0.

8

Mac OS X Open iTunes Choose speakers

Select Multiple to stream audio simultaneously to more than one range extender.

This list of supported media players is subject to change with the release of new software or mobile apps.

Windows users can stream music with Windows Media Player12. Mac users can stream music with proprietary software or the SofaPlay app. Android users can stream music with MediaHouse, UPnPlay, ArkMC, BubbleUPnP, Pixel

Media, and 2Player 2.0. IOS devices including iPhone, iPad or iPod can stream music with proprietary software or

other apps such as ArkMC, Smartstor Fusion, Mconnect, and DK UPnP/DLNA.

9

The extender supports MP3, FLAC, WAV, WMA and AAC file formats, as long as those formats are supported by the device and app doing the streaming. The 3.5mm stereo port supports earphones and powered speakers.

How to Access the Settings Interface After setup use the extenders settings interface to change any settings. On a computer or device that is connected to your range extender, open any browser (Internet Explorer, Chrome, Firefox, Safari, etc.), and enter extender.linksys.com in the address bar. You will be prompted to enter a user name and password. If you did not change them during setup, leave the user name blank and enter admin in the password field. If you customized the SSID and password, enter those credentials. If you are connected to your local network, but not to the range extender, you will need to enter the range extenders IP address in your browser to access the extenders settings. Find the IP address on your routers administrative interface.

10

Using Range Extender Settings Click Help on the right side of the screen for additional information on the screens options. Changes to settings will not be effective until you click Save at the bottom of the screen. You also can click Cancel to clear any changes.

11

Using Wi-Fi Protected Setup Wi-Fi Protected Setup makes it easy to connect your extender to your network, and connect other devices to your network through the extender.

Wi-Fi Protected Setup light activity

Connecting the range extender to an existing access point or router If your access point or router supports it, you can use Wi-Fi Protected Setup to connect the range extender to the access point or router. Log in to the settings interface and click on WPS in the left navigation bar. Choose from the setup methods below to connect the extender. You will have to perform the method twice to connect to the 2.4 GHz band and the 5 GHz band of your network. The 2.4 GHz band is connected first by default.

NOTE If you have an access point or router that does not support Wi-Fi Protected Setup, note the wireless settings and manually configure the range extender.

I Light Description

Blinking slowly (up to two minutes)

WPS connection in progress.

Solid (10 seconds)

WPS connection was successful.

Blinking quickly

(up to two minutes)

WPS cannot establish

connection or encounters a problem.

Fix: Wait a few seconds after LED stops blinking and try again.

12

1.Connecting with the Wi-Fi Protected Setup Button

Use this method if your access point or router has a Wi-Fi Protected Setup button.

a) Press the Wi-Fi Protected Setup button on the extender for one second. If you have a dual-band router you will do this again to extend the second network. The 2.4 GHz band will be extended first.

b) Click the Wi-Fi Protected Setup button on the routers Wi-Fi Protected Setup screen (if available), OR press and hold the Wi-Fi Protected Setup button on the router for one second. When the connection is complete, the Wi-Fi Protected Setup light on the extender will be solid for 10 seconds.

TIP You can also complete WPS from the settings interface by clicking WPS in the left navigation bar. Click the Wi-Fi Protected Setup icon on the extenders Wi-Fi Protected Setup screen. Click OK in that screen within two minutes.

2.Connecting with the Wi-Fi Protected Setup Pin

The Wi-Fi Protected Setup PIN (Personal Identification Number) can be found on the product label on the back of the extender. You can use this method only if your routers administration utility has a Wi-Fi Protected Setup menu.

13

a) Enter the extenders PIN into the appropriate field on the routers Wi- Fi Protected Setup screen. Click Register. When the connection is complete, the Wi-Fi Protected Setup light on the extender will be solid for 10 seconds. If you have a dual-band router you will do this again to extend the second network. The 2.4 GHz band will be extended first

b) Click OK.

Connecting devices to your network through the range extender Repeat the instructions for each client device that supports Wi-Fi Protected Setup.

1.Connecting with the Wi-Fi Protected Setup Button

a) Press the Wi-Fi Protected Setup button on the client device. b) Click the Wi-Fi Protected Setup button on the extenders Wi-Fi Protected Setup

screen, OR press and hold the Wi-Fi Protected Setup button on the side of the extender for one second. When the connection is complete, the Wi-Fi Protected Setup light on the extender will be solid for 10 seconds.

c) If using the extenders Wi-Fi Protected Setup screen, be sure to click OK within two minutes or you will have to start over.

2.Connecting with the client devices PIN

14

a) Enter the PIN from the client device in the field on the extenders Wi-Fi Protected Setup screen.

b) Click Register on the extenders Wi-Fi Protected Setup screen. When the connection is complete, the Wi-Fi Protected Setup light on the extender will be solid for 10 seconds.

c) Click OK on the extenders Wi-Fi Protected Setup screen within two minutes or you will have to start over.

3.Connecting with the extenders PIN

a) On the client device, enter the PIN listed on the extenders Wi-Fi Protected

Setup screen. (It is also listed on the product label on the back of the extender.) When the connection is complete, the Wi-Fi Protected Setup light on the extender will be solid for 10 seconds.

b) Click OK on the extenders Wi-Fi Protected Setup screen within two minutes.

15

How to Use Site Survey Site Survey gives a snapshot of all access points and wireless routers within range of the range extender.

Log in to the settings interface (see How to Access the Settings Interface on page 10). Click the Wireless tab. Click the Site Survey page.

SelectClick the button next to the wireless network name (SSID) in the Select column, and click Connect. For dual-band networks, be sure to connect to both bands, 2.4 GHz and 5 GHz.

SSIDThe names of neighboring wireless networks. GHzThe radio band (in GHz) of the neighboring wireless networks Signal StrengthThe power of the wireless signal received: dot only =

25%, dot + one wave = 50%, dot + two waves = 75%, dot + three waves = 100%. If no waves are displayed, your extender is too far from the upstream access point or the signal is blocked. Try to keep the signal strength between 50% and 100% for optimum performance.

SecurityThe mode of security in use by the neighboring wireless networks If a network supports Wi-Fi Protected Setup, the Wi-Fi Protected Setup icon is also displayed.

Cross-Band Cross-Band is the simultaneous use of both bands for high-speed data transfer and uninterrupted streaming and gaming. When in Auto Cross-Band (default), the range extender selects the appropriate band (2.4 GHz or 5 GHz) when sending data from wireless clients to the Wi-Fi router.

16

Troubleshooting Your RE4100W works on 2.4 GHz and 5 GHz networks.

You cannot get your range extender connected Check the position of your router and extender.

For first-time setup, you may need to place the extender closer to the router. After youve set up your extender, you can unplug it and move it to the final location.

To reduce signal obstructions, try alternate locations for the router and extender. Try repositioning the antennas on the range extender. Avoid placing the router and extender near metal objects, masonry walls, and

reflective surfaces such as glass or mirrors. Avoid placing the router and extender near other electronics that may cause

signal interference.

If youre using Wi-Fi Protected Setup to connect, wait until the Wi-Fi Protected Setup indicator stops blinking before trying to make the connection again.

Your Wi-Fi coverage isnt meeting expectations Reposition the antennas on your range extender. The left antenna extends your network on a horizontal plane, so the ideal position is pointing straight down (parallel to the range extender). The right antenna extends your network on a vertical plane, so the ideal position is straight out (perpendicular to the range extender).

You cannot access your range extender To access your range extender, you must be connected to your own network. If you currently have wireless Internet access, the problem may be that you have accidentally connected to a different wireless network.

To fix the problem on Windows computers, do the following*:

1. On your Windows desktop right-click the wireless icon in the system tray.

17

2. Click View Available Wireless Networks. A list of available networks will appear.

3. Click your own network name. Click Connect. In the example below, the computer was connected to another wireless network named JimsRouter. Your wireless network name, BronzeEagle in this example, is shown selected.

4. If you are prompted to enter a network key, type your password (Security Key) into the Network key and Confirm network key fields. Click Connect.

You should now be able to access the range extenders settings interface.

NOTE Depending on your version of Windows, there could be some differences in wording or icons in these steps.

To fix the problem on Mac computers, do the following:

1. In the menu bar across the top of the screen, click the Wi-Fi icon. A list of wireless networks will appear. Linksys Smart Wi-Fi has automatically assigned your network a name.

18

2. In the example below, the computer was connected to another wireless network named JimsRouter. The wireless network name of the router, BronzeEagle in this example, is shown selected.

3. Select the wireless network name of the router you want to connect to.

4. Type your wireless network password (Security Key) into the Password field. Click OK.

You should now be able to access the range extenders settings interface.

You have intermittent connection problems Plug in the range extender midway between your router and the area without Wi-Fi. Be sure you have at least 50% of your routers Wi-Fi signal at that point on the device you used for setup.

19

RE3000W V2 (N300)

Product Overview Front view

The light on the front of the range extender gives you information about power, updating and signal strength.

20

Power Light Status/ description Blinking Green Booting up.

Resetting to factory defaults.

Upgrading firmware.

Solid Green Ready to use.

Solid Amber Weak connection with the router.

Fix: Unplug the extender, and move it

closer to the router.

Blinking Amber Not connected to the router or other

error.

Fix: Unplug the extender, plug it back in,

wait two minutes, reconnect to your network.

Side view

Wi-Fi Protected Setup Button and LED (1)Use Wi-Fi Protected Setup to automatically and securely add compatible wireless devices to your network. Refer to Using Wi-Fi Protected Setup on page 25.

Reset Button (2)Press and hold until the power light on the front of the range extender blinks to reset to factory defaults. You can also restore the defaults from the Administration > Factory Defaults screen in the extenders settings interface (page 23).

21

Bottom view

EthernetConnect wired devices to your wireless network with Ethernet (network) cables. The green light turns on when an Ethernet device is connected and active on this port. The light blinks when the extender is sending or receiving data over the Ethernet port.

How to Install the Range Extender 1. Plug in the range extender

Plug in the range extender midway between your router and the area without Wi-Fi. Using your mobile device or laptop, be sure you have at least two bars (around 50%) of your routers Wi-Fi signal at that location. The setup software will help you find the right place if you have trouble.

22

2. Wait for a solid light It could take up to a minute for the light on the front of the range extender to stop blinking.

3. Connect to the range extender

On a computer, phone or tablet, connect to the Wi-Fi network Linksys Extender Setup.

4. Launch setup

Enter http://extender.linksys.com in a browser and follow the on-screen instructions to set up your range extender.

TIPS You can also connect the range extender by using Wi-Fi Protected Setup. For more

information, see Using Wi-Fi Protected Setup on page 25. After setup use the extenders settings interface to change any settings. If connected to

your range extender go to extender.linksys.com.

How to Access the Settings Interface After setup use the extenders settings interface to change any settings. On a computer or device that is connected to your range extender, open any browser (Internet Explorer, Chrome, Firefox, Safari, etc.), and enter extender.linksys.com in the address bar.

23

You will be prompted to enter a user name and password. If you did not change them during setup, leave the user name blank and enter admin in the password field. If you customized the SSID and password, enter those credentials. If you are connected to your local network, but not to the range extender, you will need to enter the range extenders IP address in your browser to access the extenders settings. Find the IP address on your routers administrative interface.

Using Range Extender Settings Click Help on the right side of the screen for additional information on the screens options. Changes to settings will not be effective until you click Save at the bottom of the screen. You also can click Cancel to clear any changes.

24

Using Wi-Fi Protected Setup Wi-Fi Protected Setup makes it easy to connect your extender to your network, and connect other devices to your network through the extender.

Wi-Fi Protected Setup light activity

Connecting the range extender to an existing access point or router If your access point or router supports it, you can use Wi-Fi Protected Setup to connect the range extender to the access point or router. Log in to the settings interface and click on WPS in the left navigation bar. Choose from the setup methods below to connect the extender.

NOTE If you have an access point or router that does not support Wi-Fi Protected Setup, note the wireless settings and manually configure the range extender.

WPS Light Description

Blinking slowly (up to two minutes)

WPS connection in progress.

Solid (10 seconds)

WPS connection was successful.

Blinking quickly

(up to two minutes)

WPS cannot establish

connection or encounters a problem.

Fix: Wait a few seconds after LED stops blinking and try again.

25

1.Connecting with the Wi-Fi Protected Setup Button

Use this method if your access point or router has a Wi-Fi Protected Setup button.

a) Press the Wi-Fi Protected Setup button on the extender for one second. If you have a dual-band router you will do this again to extend the second network. The 2.4 GHz band will be extended first.

b) Click the Wi-Fi Protected Setup button on the routers Wi-Fi Protected Setup screen (if available), OR press and hold the Wi-Fi Protected Setup button on the router for one second. When the connection is complete, the Wi-Fi Protected Setup light on the extender will be solid for 10 seconds.

TIP You can also complete WPS from the settings interface by clicking WPS in the left navigation bar. Click the Wi-Fi Protected Setup icon on the extenders Wi-Fi Protected Setup screen. Click OK in that screen within two minutes.

2.Connecting with the Wi-Fi Protected Setup Pin

The Wi-Fi Protected Setup PIN (Personal Identification Number) can be found on the product label on the back of the extender. You can use this method only if your routers administration utility has a Wi-Fi Protected Setup menu.

26

a) Enter the extenders PIN into the appropriate field on the routers Wi- Fi Protected Setup screen. Click Register. When the connection is complete, the Wi-Fi Protected Setup light on the extender will be solid for 10 seconds.

b) Click OK.

Connecting devices to your network through the range extender Repeat the instructions for each client device that supports Wi-Fi Protected Setup.

1.Connecting with the Wi-Fi Protected Setup Button

a) Press the Wi-Fi Protected Setup button on the client device. b) Click the Wi-Fi Protected Setup button on the extenders Wi-Fi Protected Setup

screen, OR press and hold the Wi-Fi Protected Setup button on the side of the extender for one second. When the connection is complete, the Wi-Fi Protected Setup light on the extender will be solid for 10 seconds.

c) If using the extenders Wi-Fi Protected Setup screen, be sure to click OK within two minutes or you will have to start over.

2.Connecting with the client devices PIN

27

a) Enter the PIN from the client device in the field on the extenders Wi-Fi Protected Setup screen.

b) Click Register on the extenders Wi-Fi Protected Setup screen. When the connection is complete, the Wi-Fi Protected Setup light on the extender will be solid for 10 seconds.

c) Click OK on the extenders Wi-Fi Protected Setup screen within two minutes or you will have to start over.

3.Connecting with the extenders PIN

a) On the client device, enter the PIN listed on the extenders Wi-Fi Protected

Setup screen. (It is also listed on the product label on the back of the extender.) When the connection is complete, the Wi-Fi Protected Setup light on the extender will be solid for 10 seconds.

b) Click OK on the extenders Wi-Fi Protected Setup screen within two minutes.

28

How to Use Site Survey Site Survey gives a snapshot of all access points and wireless routers within range of the range extender.

Log in to the settings interface (see How to Access the Settings Interface on page 10). Click the Wireless tab. Click the Site Survey page.

SelectClick the button next to the wireless network name (SSID) in the Select column, and click Connect. For dual-band networks, be sure to connect to both bands, 2.4 GHz and 5 GHz.

SSIDThe names of neighboring wireless networks. GHzThe radio band (in GHz) of the neighboring wireless networks Signal StrengthThe power of the wireless signal received: dot only = 25%, dot

+ one wave = 50%, dot + two waves = 75%, dot + three waves = 100%. If no waves are displayed, your extender is too far from the upstream access point or the signal is blocked. Try to keep the signal strength between 50% and 100% for optimum performance.

SecurityThe mode of security in use by the neighboring wireless networks If a network supports Wi-Fi Protected Setup, the Wi-Fi Protected Setup icon is also displayed.

29

Specifications

RE4100W Model Name Linksys RE4100W Description Dual-band Wireless-N Range Extender Model Number RE4100W Standards IEEE 802.11n, 802.11g, 802.11b, 802.3u Ports Ethernet, Audio, Power

Buttons Reset, Wi-Fi Protected Setup, Power (European model only)

LEDs Power, WPS, Ethernet (link, activity) Antennas 2 internal

Wireless Security Wi-Fi Protected Access 2 (WPA2), Wi-Fi Protected Access (WPA), WEP

Security Key Bits Up to 128-bit encryption

Environmental Dimensions 2.64 x 1.49 x 4.13 (67x38x105 mm)

Weight 5.12 oz (158 g)

Power 12 V DC/1.0 A

Certification FCC, ICES-003, RSS210, CE, Wi-Fi (IEEE 802.11a/b/g/n/ac), WPA2, WMM, Wi-Fi Protected Setup

Operating Temp. 32 to 104F (0 to 40C)

Storage Temp. -4 to 140F (-20 to 60C)

Operating Humidity 10 to 80% non-condensing

Storage Humidity 5 to 90% non-condensing

Specifications are subject to change without notice.

30

RE3000W V2 Model Name Linksys RE3000W V2 Description Wireless-N Range Extender Model Number RE3000W Standards IEEE 802.11n, 802.11g, 802.11b, 802.3u Ports Ethernet, Power

Buttons Reset, Wi-Fi Protected Setup, Power (European model only)

LEDs Power, WPS, Ethernet (link, activity) Antennas 2 internal

Wireless Security Wi-Fi Protected Access 2 (WPA2), Wi-Fi Protected Access (WPA), WEP

Security Key Bits Up to 128-bit encryption

Environmental Dimensions 2.64 x 1.49 x 4.13 (67x38x105 mm)

Weight 5.12 oz (158 g)

Power 12 V DC/1.0 A

Certification FCC, ICES-003, RSS210, CE, Wi-Fi (IEEE 802.11a/b/g/n/ac), WPA2, WMM, Wi-Fi Protected Setup

Operating Temp. 32 to 104F (0 to 40C)

Storage Temp. -4 to 140F (-20 to 60C)

Operating Humidity 10 to 80% non-condensing

Storage Humidity 5 to 90% non-condensing

Specifications are subject to change without notice.

31

Visit linksys.com/support/ for award-winning 24/7 technical support BELKIN, LINKSYS and many product names and logos are trademarks of the Belkin group of companies. Third-party trademarks mentioned are the property of their respective owners. Licenses and notices for third party software used in this product may be viewed here: http://support.linksys.com/en-us/license. Please contact http://support.linksys.com/en- us/gplcodecenter for questions or GPL source code requests. 2016 Belkin International, Inc. and/or its affiliates. All rights reserved.

LNKPG-00234 Rev A01

32

W V2/RE4100W

Table des matires RE4100W (N600) .................................................................................................. 3

Vue d'ensemble du produit ................................................................................................................. 3 Installation de l'amplificateur de porte ........................................................................................ 5 Fonction spciale : lecture de musique en transit ...................................................................... 7 iOS .............................................................................................................................................................. 7 Android* ..................................................................................................................................................... 8 Windows .................................................................................................................................................... 8 Mac OS X .................................................................................................................................................. 9

Accs l'interface de configuration ............................................................ 10

Utilisation des paramtres de l'amplificateur de porte ...................... 10

Utilisation de la fonction Wi-Fi Protected Setup ................................... 12

Activit du voyant WPS .................................................................................................................... 12 Connexion de l'amplificateur de porte un point d'accs ou routeur existant .......... 12 Connexion de priphriques votre rseau en passant par l'amplificateur de porte ................................................................................................................................................................... 14

Utilisation de la fonction Site Survey (Analyse du site)......................... 16

Dpannage ............................................................................................................ 18

Impossible de connecter votre amplificateur de porte....................................................... 18 Votre couverture sans fil ne correspond pas aux attentes ................................................. 18 Impossible d'accder votre relais de porte .......................................................................... 18 Vous avez des problmes de connexion intermittents ......................................................... 20

RE3000W V2 (N300) ........................................................................................ 21

Vue d'ensemble du produit .............................................................................................................. 21

Installation de l'amplificateur de porte ..................................................... 23

Accs l'interface de configuration ............................................................ 25

Utilisation des paramtres de l'amplificateur de porte ...................... 26

Utilisation de la fonction Wi-Fi Protected Setup ................................... 27

Activit du voyant WPS .................................................................................................................... 27 Connexion de l'amplificateur de porte un point d'accs ou routeur existant .......... 27 Connexion de priphriques votre rseau en passant par l'amplificateur de porte ................................................................................................................................................................... 29

Utilisation de la fonction Site Survey (Analyse du site)......................... 31

Spcifications ...................................................................................................... 32

RE4100W ............................................................................................................................................. 32 Environnement d'exploitation ........................................................................................................ 32 RE3000W V2 ...................................................................................................................................... 33 Environnement d'exploitation ........................................................................................................ 33

RE4100W (N600)

Vue d'ensemble du produit Vue avant

Le tmoin lumineux sur la face avant de l'amplificateur de porte vous renseigne sur l'alimentation, la mise jour et la puissance du signal.

Voyant d'alimentation

tat / description

Vert clignotant Dmarrage. Rinitialisation des paramtres par

dfaut. Mise niveau du micrologiciel.

Vert fixe Prt tre utilis.

Ambre fixe Faible connexion avec le routeur.

Solution : Dbranchez l'amplificateur et rapprochez-le du routeur.

Ambre clignotant Non connect au routeur ou autre erreur.

Solution : Dbranchez l'amplificateur,

rebranchez-le, patientez deux minutes, reconnectez-vous votre rseau.

3

Vue latrale

Prise audio (1) Bouton Wi-Fi Protected Setup (WPS) (2) : utilisez la fonction Wi-Fi Protected Setup pour

ajouter automatiquement et en toute scurit des priphriques sans fil compatibles votre rseau. Reportez-vous la section Configuration selon la norme Wi-Fi Protected Setup (WPS) la page 12.

Bouton Reset (rinitialisation) (3) : maintenez ce bouton enfonc jusqu' ce que le voyant d'alimentation sur la face avant de l'amplificateur de porte clignote pour rinitialiser aux paramtres tablis par dfaut l'usine. Vous pouvez galement rtablir les paramtres par dfaut partir de l'cran Administration > Factory Defaults (Paramtres par dfaut) dans l'interface de configuration de l'amplificateur (page 10).

Vue du dessous

Ethernet : raccordez des priphriques cbls votre rseau sans fil en utilisant des cbles Ethernet (rseau). Le voyant vert s'allume lorsqu'un priphrique Ethernet est connect et actif sur ce port. Le voyant clignote lorsque l'amplificateur de porte envoie ou reoit des donnes sur un port Ethernet.

4

Installation de l'amplificateur de porte 1. Branchez l'amplificateur de porte

Branchez l'amplificateur de porte mi-chemin entre votre routeur et la zone dpourvue de couverture sans fil. En utilisant votre appareil mobile ou votre ordinateur portable, assurez-vous d'avoir au moins deux barres (environ 50 %) du signal sans fil de votre routeur cet emplacement. Le logiciel de configuration vous aidera trouver le bon emplacement en cas de doute.

2. Patientez jusqu' ce qu'un voyant s'allume en continu Cela peut prendre jusqu' une minute pour que le voyant sur la face avant de l'amplificateur de porte arrte de clignoter.

5

3. Connectez-vous l'amplificateur de porte partir d'un ordinateur, d'un tlphone ou d'une tablette, connectez-vous au rseau sans fil Linksys Extender Setup (Installation de l'amplificateur Linksys).

4. Lancez l'installation

Entrez http://extender.linksys.com dans un navigateur et suivez les instructions l'cran pour configurer votre amplificateur de porte.

ASTUCES Vous pouvez aussi connecter l'amplificateur de porte en utilisant la fonction Wi-Fi

Protected Setup (WPS). Pour de plus amples renseignements, reportez-vous la section Configuration selon la norme Wi-Fi Protected Setup (WPS) la page 12.

Aprs l'installation, utilisez l'interface de configuration de l'amplificateur pour modifier tout paramtre. Si vous tes connect votre amplificateur de porte, allez la page extender.linksys.com.

6

Fonction spciale : lecture de musique en transit L'amplificateur de porte N600 PRO vous permet de lire de la musique en continu sur votre rseau et de la diffuser sur des haut-parleurs connects

iOS Connectez l'appareil iOS au mme rseau sans fil que votre amplificateur de porte. Faites glisser votre doigt du bas de l'cran vers le haut. Appuyez sur Amplificateur de porte Linksys.

7

Android* Connectez l'appareil Galaxy au mme rseau sans fil que votre amplificateur de porte. Slectionnez l'application Musique Choisissez un fichier de musique et appuyez sur licne Mise en miroir de l'cran Choisissez Amplificateur de porte Linksys.

Windows

Ouvrez le Lecteur Windows Media Cliquez avec le bouton droit de la souris sur un fichier de musique et choisissez

Amplificateur de porte Linksys

Ce qui s'affiche l'cran peut diffrer selon le modle

de votre appareil et la version d'Android utilise.

* Pour les autres appareils Android qui peuvent lire de la musique en utilisant les applications MediaHouse, UPnPlay, ArkMC, BubbleUPnP, Pixel Media et

8

Mac OS X Ouvrez iTunes Choisissez le menu Haut-parleurs

Slectionnez Multiples pour diffuser de la musique simultanment sur plus d'un

amplificateur de porte.

La liste des lecteurs multimdia pris en charge peut faire l'objet de modifications en fonction des sorties de nouveaux logiciels ou d'applications mobiles.

Les utilisateurs de Windows peuvent lire de la musique en utilisant le Lecteur Windows Media 12.

Les utilisateurs de Mac peuvent lire de la musique en utilisant des logiciels propritaires ou l'application SofaPlay.

Les utilisateurs d'Android peuvent lire de la musique en utilisant les applications MediaHouse, UPnPlay, ArkMC, BubbleUPnP, Pixel Media et 2Player 2.0.

9

Les utilisateurs d'appareils iOS dont les iPhone, iPad et iPod peuvent lire de la musique en utilisant des logiciels propritaires ou d'autres applications comme ArkMC, Smartstor Fusion, Mconnect et DK UPnP/DLNA.

L'amplificateur prend en charge les fichiers aux formats MP3, FLAC, WAV, WMA et AAC, sous rserve que ces formats soient pris en charge par l'appareil et l'application excutant la lecture. La prise stro 3,5 mm prend en charge des couteurs et des haut-parleurs actifs.

Accs l'interface de configuration Aprs l'installation, utilisez l'interface de configuration de l'amplificateur pour modifier tout paramtre. Sur un ordinateur ou un appareil qui est connect votre amplificateur de porte, ouvrez un navigateur (Internet Explorer, Chrome, Firefox, Safari, etc.), et entrez extender.linksys.com dans la barre d'adresse. Il vous sera demand d'entrer un nom d'utilisateur et un mot de passe. Si vous ne les avez pas modifis au cours de la configuration, laissez le champ du nom d'utilisateur en blanc et entrez admin dans le champ de mot de passe. Si vous avez personnalis le nom SSID et le mot de passe, entrez ces identifiants. Si vous tes connect votre rseau local, mais pas l'amplificateur de porte, vous devrez entrer l'adresse IP de l'amplificateur de porte dans votre navigateur pour accder aux paramtres de l'amplificateur. Vous trouverez l'adresse IP sur l'interface d'administration de votre routeur.

Utilisation des paramtres de l'amplificateur de porte Cliquez sur Aide droite de l'cran pour de plus amples renseignements sur les options offertes. Les modifications de paramtres ne seront appliques que lorsque vous aurez cliqu sur Enregistrer au bas de lcran. Vous pouvez galement cliquer sur Annuler pour supprimer les modifications.

10

11

Utilisation de la fonction Wi-Fi Protected Setup La configuration selon la norme Wi-Fi Protected Setup simplifie la connexion de votre amplificateur de porte au rseau et de vos autres priphriques l'amplificateur.

Activit du voyant WPS

Connexion de l'amplificateur de porte un point d'accs ou routeur existant Si votre point d'accs ou votre routeur la prend en charge, vous pouvez utiliser la fonction WPS pour connecter l'amplificateur de porte au point d'accs ou au routeur. Connectez-vous l'interface de configuration et cliquez sur WPS dans la barre de navigation gauche. Choisissez l'une des mthodes de configuration ci-dessous pour connecter l'amplificateur. Vous devrez appliquer la mthode deux fois pour vous connecter la bande 2,4 GHz et la bande 5 GHz de votre rseau. La bande 2,4 GHz est connecte en premier par dfaut.

REMARQUE : si vous disposez d'un point d'accs ou d'un routeur qui ne prend pas en charge la configuration selon la norme Wi-Fi Protected Setup, notez les paramtres sans fil et configurez manuellement l'amplificateur de porte.

Voyant WPS Description

Clignote lentement (jusqu' deux minutes)

Connexion WPS en cours.

Fixe (10 secondes)

La connexion WPS a russi.

Clignote rapidement (jusqu' deux minutes)

La connexion WPS ne peut pas tre tablie, ou il y a un problme.

Solution : Attendez quelques secondes aprs que le tmoin lumineux a cess de clignoter,

puis essayez nouveau.

12

1.Connexion l'aide du bouton WPS

Utilisez cette mthode si votre point d'accs ou routeur est quip d'un bouton Wi-Fi Protected Setup.

a) Appuyez sur le bouton Wi-Fi Protected Setup sur l'amplificateur de porte pendant une seconde. Si vous avez un routeur double bande, rptez cette opration pour tendre le second rseau. La bande 2,4 GHz sera tendue en premier.

b) Cliquez sur le bouton Wi-Fi Protected Setup (WPS) l'cran WPS du routeur (s'il est disponible), OU appuyez sur le bouton WPS sur le routeur et maintenez-le enfonc pendant une seconde. Une fois la connexion tablie, le voyant WPS de l'amplificateur restera allum pendant 10 secondes.

ASTUCE : vous pouvez galement excuter la configuration WPS partir de l'interface de configuration en cliquant sur WPS dans la barre de navigation gauche. Cliquez sur l'icne Wi-Fi Protected Setup l'cran Wi-Fi Protected Setup de l'amplificateur de porte. Cliquez sur OK sur cet cran dans les deux minutes qui suivent.

2.Connexion l'aide du NIP Wi-Fi Protected Setup

Le NIP (numro d'identification personnel) de la configuration Wi-Fi Protected Setup se trouve sur l'tiquette sur la partie arrire de l'amplificateur. Servez- vous de cette mthode uniquement si l'utilitaire d'administration de votre routeur possde un menu Wi-Fi Protected Setup.

13

a) Entrez le NIP de l'amplificateur dans le champ appropri de l'cran Wi- Fi Protected Setup du routeur. Cliquez sur Enregistrer. Une fois la connexion tablie, le voyant WPS de l'amplificateur restera allum pendant 10 secondes. Si vous avez un routeur double bande, rptez cette opration pour tendre le second rseau. La bande 2,4 GHz sera tendue en premier

b) Cliquez sur OK.

Connexion de priphriques votre rseau en passant par l'amplificateur de porte Rptez la procdure pour chaque priphrique client prenant en charge la configuration selon la norme Wi-Fi Protected Setup.

1.Connexion l'aide du bouton WPS

a) Appuyez sur le bouton WPS sur le priphrique client. b) Cliquez sur le bouton Wi-Fi Protected Setup (WPS) l'cran WPS de

l'amplificateur OU appuyez sur le bouton WPS sur le ct de l'amplificateur et maintenez-le enfonc pendant une seconde. Une fois la connexion tablie, le voyant WPS de l'amplificateur restera allum pendant 10 secondes.

c) Si vous utilisez l'cran Wi-Fi Protected Setup de l'amplificateur, assurez-vous de cliquer sur OK dans les deux minutes qui suivent sans quoi, vous devrez recommencer.

14

2.Connexion avec le NIP du priphrique client

a) Entrez le NIP du priphrique client dans le champ appropri l'cran Wi-Fi Protected Setup de l'amplificateur.

b) Cliquez sur Enregistrer l'cran Wi-Fi Protected Setup de l'amplificateur. Une fois la connexion tablie, le voyant WPS de l'amplificateur restera allum pendant 10 secondes.

c) Cliquez sur OK l'cran Wi-Fi Protected Setup de l'amplificateur dans les deux minutes qui suivent sans quoi, vous devrez recommencer.

3.Connexion avec le NIP de l'amplificateur

a) Sur le priphrique client, entrez le NIP indiqu l'cran Wi-Fi Protected Setup

de l'amplificateur. (Le NIP figure galement sur l'tiquette de produit appose au dos de l'amplificateur.) Une fois la connexion tablie, le voyant WPS de l'amplificateur restera allum pendant 10 secondes.

b) Cliquez sur OK l'cran Wi-Fi Protected Setup de l'amplificateur dans les deux minutes qui suivent.

15

Utilisation de la fonction Site Survey (Analyse du site) La fonction Site Survey (Analyse du site) permet d'obtenir un aperu de tous les points d'accs et routeurs sans fil qui se trouvent porte de l'amplificateur.

Connectez-vous l'interface de configuration (voir Accs l'interface de configuration la page 10). Cliquez sur longlet Wireless (Sans fil). Cliquez sur la page Site Survey (Analyse du site).

Select (Slection) : cliquez sur le bouton ct du nom de rseau sans fil voulu (SSID) dans la colonne Select (Slection), puis sur Connect (Connexion). Pour les rseaux double bande, assurez-vous de vous connecter aux deux bandes, 2,4 GHz et 5 GHz.

SSID : les noms des rseaux sans fil situs proximit. GHz : la bande radio (en GHz) des rseaux sans fil situs proximit. Signal Strength (Puissance de signal) : l'intensit du signal sans fil reu :

point seul = 25 %, point + une onde = 50 %, point + deux ondes = 75 %, point + trois ondes = 100 %. Si aucune onde ne s'affiche, soit votre amplificateur est trop loign du point d'accs en amont, soit le signal est bloqu. Essayez de garder une puissance de signal entre 50 % et 100 % pour des performances optimales.

Security (Scurit) : le mode de scurit qu'utilisent les rseaux sans fil proximit.Si un rseau prend en charge la configuration selon la norme Wi-Fi Protected Setup, l'icne WPS s'affiche galement.

16

Bande transversale La bande transversale est l'utilisation simultane des deux bandes pour des transferts de donnes haute vitesse et une diffusion multimdia et des jeux en ligne ininterrompus. Lorsque la bande transversale automatique est active (par dfaut), l'amplificateur de porte slectionne la bande approprie (2,4 GHz ou 5 GHz) lors de l'mission de donnes de clients sans fil vers le routeur sans fil.

17

Dpannage Votre modle RE4100W fonctionne sur les rseaux 2,4 GHz et 5 GHz.

Impossible de connecter votre amplificateur de porte Vrifiez les positions de votre routeur et de votre amplificateur.

Pour la premire configuration, il est conseill de placer votre relais prs du routeur. Une fois la configuration du relais termine, vous pouvez le dbrancher et le poser son emplacement final.

Pour rduire les obstacles au signal, essayez de placer l'amplificateur et le routeur diffrents endroits.

Essayez de repositionner les antennes sur l'amplificateur de porte. vitez de placer le routeur et l'amplificateur prs d'objets mtalliques, de murs

en maonnerie et de surfaces rflchissantes comme des vitres ou des miroirs. vitez de placer le routeur et l'amplificateur prs d'autres appareils

lectroniques qui peuvent crer des interfrences du signal.

Si vous utilisez la configuration selon la norme Wi-Fi Protected Setup pour vous connecter, attendez que l'indicateur Wi-Fi Protected Setup arrte de clignoter avant d'essayer nouveau d'tablir la connexion.

Votre couverture sans fil ne correspond pas aux attentes Repositionnez les antennes sur votre amplificateur de porte. L'antenne gauche tend votre rseau sur un plan horizontal; l'emplacement idal est donc de l'orienter vers le bas (paralllement l'amplificateur de porte). L'antenne droite tend votre rseau sur un plan vertical; l'emplacement idal est donc de l'orienter l'horizontale (perpendiculairement l'amplificateur de porte).

Impossible d'accder votre relais de porte Pour accder votre amplificateur de porte, vous devez tre connect votre propre rseau. Si vous disposez d'un accs Internet sans fil, vous vous tes peut-tre connect accidentellement un autre rseau sans fil.

Pour rgler le problme sur les ordinateurs sous Windows, suivez les instructions suivantes* :

1. Sur votre bureau Windows, cliquez avec le bouton droit de la souris sur l'icne de connexion sans fil dans la barre d'tat systme.

18

2. Cliquez sur Afficher les rseaux sans fil disponibles. Une liste des rseaux disponibles s'affiche.

3. Cliquez sur le nom de votre propre rseau. Cliquez sur Connexion. Dans l'exemple ci- dessous, l'ordinateur tait connect un autre rseau sans fil appel JimsRouter. Le nom de votre rseau sans fil, BronzeEagle dans cet exemple, est slectionn.

4. Si vous tes invit saisir une cl de rseau, entrez votre mot de passe (cl de scurit) dans les champs Network key (Cl rseau) et Confirm network key (Confirmer la cl rseau). Cliquez sur Connexion.

Vous devriez maintenant pouvoir accder l'interface de configuration de l'amplificateur de porte.

REMARQUE : selon la version Windows que vous utilisez, la description ou les icnes reprsentant ces tapes pourraient tre lgrement diffrentes.

Pour rgler le problme sur les ordinateurs sous Mac, suivez les instructions suivantes :

19

1. Dans la barre de menu en haut de l'cran, cliquez sur l'icne du sans-fil. Une liste des rseaux sans fil apparatra. Sans-fil intelligent Linksys a automatiquement attribu un nom votre rseau.

2. Dans l'exemple ci-dessous, l'ordinateur tait connect un autre rseau sans fil appel JimsRouter. Le nom du rseau sans fil du routeur, BronzeEagle dans cet exemple, est slectionn.

3. Slectionnez le nom du rseau sans fil du routeur auquel vous voulez vous connecter.

4. Entrez votre mot de passe de rseau sans fil (Cl de scurit) dans le champ Mot de passe. Cliquez sur OK.

Vous devriez maintenant pouvoir accder l'interface de configuration de l'amplificateur de porte.

Vous avez des problmes de connexion intermittents Branchez l'amplificateur de porte mi-chemin entre votre routeur et la zone dpourvue de couverture sans fil. Assurez-vous que vous recevez au moins 50 % du signal sans fil de votre routeur cet endroit, sur l'appareil que vous avez utilis pour l'installation.

20

RE3000W V2 (N300)

Vue d'ensemble du produit Vue avant

Le tmoin lumineux sur la face avant de l'amplificateur de porte vous renseigne sur l'alimentation, la mise jour et la puissance du signal.

21

Voyant d'alimentation

tat / description

Vert clignotant Dmarrage.

Rinitialisation des paramtres par dfaut.

Mise niveau du micrologiciel.

Vert fixe Prt tre utilis.

Ambre fixe Faible connexion avec le routeur.

Solution : Dbranchez l'amplificateur et rapprochez-le du routeur.

Ambre clignotant Non connect au routeur ou autre erreur.

Solution : Dbranchez l'amplificateur,

rebranchez-le, patientez deux minutes, reconnectez-vous votre rseau.

Vue latrale

Bouton et voyant Wi-Fi Protected Setup (WPS) (1) : utilisez la fonction Wi-Fi Protected Setup pour ajouter automatiquement et en toute scurit des priphriques sans fil compatibles votre rseau. Reportez-vous la section Configuration selon la norme Wi- Fi Protected Setup (WPS) la page 27.

22

Bouton Reset (rinitialisation) (2) : maintenez ce bouton enfonc jusqu' ce que le voyant d'alimentation sur la face avant de l'amplificateur de porte clignote pour rinitialiser aux paramtres tablis par dfaut l'usine. Vous pouvez galement rtablir les paramtres par dfaut partir de l'cran Administration > Factory Defaults (Paramtres par dfaut) dans l'interface de configuration de l'amplificateur (page 25).

Vue du dessous

Ethernet : raccordez des priphriques cbls votre rseau sans fil en utilisant des cbles Ethernet (rseau). Le voyant vert s'allume lorsqu'un priphrique Ethernet est connect et actif sur ce port. Le voyant clignote lorsque l'amplificateur de porte envoie ou reoit des donnes sur un port Ethernet.

Installation de l'amplificateur de porte 1. Branchez l'amplificateur de porte

Branchez l'amplificateur de porte mi-chemin entre votre routeur et la zone dpourvue de couverture sans fil. En utilisant votre appareil mobile ou votre ordinateur portable, assurez-vous d'avoir au moins deux barres (environ 50 %) du signal sans fil de votre routeur cet emplacement. Le logiciel de configuration vous aidera trouver le bon emplacement en cas de doute.

23

2. Patientez jusqu' ce qu'un voyant s'allume en continu Cela peut prendre jusqu' une minute pour que le voyant sur la face avant de l'amplificateur de porte arrte de clignoter.

24

3. Connectez-vous l'amplificateur de porte partir d'un ordinateur, d'un tlphone ou d'une tablette, connectez-vous au rseau sans fil Linksys Extender Setup (Installation de l'amplificateur Linksys).

4. Lancez l'installation

Entrez http://extender.linksys.com dans un navigateur et suivez les instructions l'cran pour configurer votre amplificateur de porte.

ASTUCES Vous pouvez aussi connecter l'amplificateur de porte en utilisant la fonction Wi-Fi

Protected Setup (WPS). Pour de plus amples renseignements, reportez-vous la section Configuration selon la norme Wi-Fi Protected Setup (WPS) la page 27.

Aprs l'installation, utilisez l'interface de configuration de l'amplificateur pour modifier tout paramtre. Si vous tes connect votre amplificateur de porte, allez la page extender.linksys.com.

Accs l'interface de configuration Aprs l'installation, utilisez l'interface de configuration de l'amplificateur pour modifier tout paramtre. Sur un ordinateur ou un appareil qui est connect votre amplificateur de porte, ouvrez un navigateur (Internet Explorer, Chrome, Firefox, Safari, etc.), et entrez extender.linksys.com dans la barre d'adresse. Il vous sera demand d'entrer un nom d'utilisateur et un mot de passe. Si vous ne les avez pas modifis au cours de la configuration, laissez le champ du nom d'utilisateur en blanc et entrez admin dans le champ de mot de passe. Si vous avez personnalis le nom SSID et le mot de passe, entrez ces identifiants. Si vous tes connect votre rseau local, mais pas l'amplificateur de porte, vous devrez entrer l'adresse IP de l'amplificateur de porte dans votre navigateur pour accder aux paramtres de l'amplificateur. Vous trouverez l'adresse IP sur l'interface d'administration de votre routeur.

25

Utilisation des paramtres de l'amplificateur de porte Cliquez sur Aide droite de l'cran pour de plus amples renseignements sur les options offertes. Les modifications de paramtres ne seront appliques que lorsque vous aurez cliqu sur Enregistrer au bas de lcran. Vous pouvez galement cliquer sur Annuler pour supprimer les modifications.

26

Utilisation de la fonction Wi-Fi Protected Setup La configuration selon la norme Wi-Fi Protected Setup simplifie la connexion de votre amplificateur de porte au rseau et de vos autres priphriques l'amplificateur.

Activit du voyant WPS

Connexion de l'amplificateur de porte un point d'accs ou routeur existant Si votre point d'accs ou votre routeur la prend en charge, vous pouvez utiliser la fonction WPS pour connecter l'amplificateur de porte au point d'accs ou au routeur. Connectez-vous l'interface de configuration et cliquez sur WPS dans la barre de navigation gauche. Choisissez l'une des mthodes de configuration ci-dessous pour connecter l'amplificateur.

REMARQUE : si vous disposez d'un point d'accs ou d'un routeur qui ne prend pas en charge la configuration selon la norme Wi-Fi Protected Setup, notez les paramtres sans fil et configurez manuellement l'amplificateur de porte.

Voyant WPS Description

Clignote lentement (jusqu' deux minutes)

Connexion WPS en cours.

Fixe (10 secondes)

La connexion WPS a russi.

Clignote rapidement (jusqu' deux minutes)

La connexion WPS ne peut pas tre tablie, ou il y a un problme.

Solution : Attendez quelques secondes aprs que le tmoin

lumineux a cess de clignoter, puis essayez nouveau.

27

1.Connexion l'aide du bouton WPS

Utilisez cette mthode si votre point d'accs ou routeur est quip d'un bouton Wi-Fi Protected Setup.

a) Appuyez sur le bouton Wi-Fi Protected Setup sur l'amplificateur de porte pendant une seconde. Si vous avez un routeur double bande, rptez cette opration pour tendre le second rseau. La bande 2,4 GHz sera tendue en premier.

b) Cliquez sur le bouton Wi-Fi Protected Setup (WPS) l'cran WPS du routeur (s'il est disponible), OU appuyez sur le bouton WPS sur le routeur et maintenez-le enfonc pendant une seconde. Une fois la connexion tablie, le voyant WPS de l'amplificateur restera allum pendant 10 secondes.

ASTUCE : vous pouvez galement excuter la configuration WPS partir de l'interface de configuration en cliquant sur WPS dans la barre de navigation gauche. Cliquez sur l'icne Wi-Fi Protected Setup l'cran Wi-Fi Protected Setup de l'amplificateur de porte. Cliquez sur OK sur cet cran dans les deux minutes qui suivent.

2.Connexion l'aide du NIP Wi-Fi Protected Setup

Le NIP (numro d'identification personnel) de la configuration Wi-Fi Protected Setup se trouve sur l'tiquette sur la partie arrire de l'amplificateur. Servez-vous de cette mthode uniquement si l'utilitaire d'administration de votre routeur possde un menu Wi-Fi Protected Setup.

28

a) Entrez le NIP de l'amplificateur dans le champ appropri de l'cran Wi- Fi Protected Setup du routeur. Cliquez sur Enregistrer. Une fois la connexion tablie, le voyant WPS de l'amplificateur restera allum pendant 10 secondes.

b) Cliquez sur OK.

Connexion de priphriques votre rseau en passant par l'amplificateur de porte Rptez la procdure pour chaque priphrique client prenant en charge la configuration selon la norme Wi-Fi Protected Setup.

1.Connexion l'aide du bouton WPS

a) Appuyez sur le bouton WPS sur le priphrique client. b) Cliquez sur le bouton Wi-Fi Protected Setup (WPS) l'cran WPS de

l'amplificateur OU appuyez sur le bouton WPS sur le ct de l'amplificateur et maintenez-le enfonc pendant une seconde. Une fois la connexion tablie, le voyant WPS de l'amplificateur restera allum pendant 10 secondes.

c) Si vous utilisez l'cran Wi-Fi Protected Setup de l'amplificateur, assurez-vous de cliquer sur OK dans les deux minutes qui suivent sans quoi, vous devrez recommencer.

2.Connexion avec le NIP du priphrique client

29

a) Entrez le NIP du priphrique client dans le champ appropri l'cran Wi-Fi Protected Setup de l'amplificateur.

b) Cliquez sur Enregistrer l'cran Wi-Fi Protected Setup de l'amplificateur. Une fois la connexion tablie, le voyant WPS de l'amplificateur restera allum pendant 10 secondes.

c) Cliquez sur OK l'cran Wi-Fi Protected Setup de l'amplificateur dans les deux minutes qui suivent sans quoi, vous devrez recommencer.

3.Connexion avec le NIP de l'amplificateur

a) Sur le priphrique client, entrez le NIP indiqu l'cran Wi-Fi Protected Setup

de l'amplificateur. (Le NIP figure galement sur l'tiquette de produit appose au dos de l'amplificateur.) Une fois la connexion tablie, le voyant WPS de l'amplificateur restera allum pendant 10 secondes.

b) Cliquez sur OK l'cran Wi-Fi Protected Setup de l'amplificateur dans les deux minutes qui suivent.

30

Utilisation de la fonction Site Survey (Analyse du site) La fonction Site Survey (Analyse du site) permet d'obtenir un aperu de tous les points d'accs et routeurs sans fil qui se trouvent porte de l'amplificateur.

Connectez-vous l'interface de configuration (voir Accs l'interface de configuration la page 10). Cliquez sur longlet Wireless (Sans fil). Cliquez sur la page Site Survey (Analyse du site).

Select (Slection) : cliquez sur le bouton ct du nom de rseau sans fil voulu (SSID) dans la colonne Select (Slection), puis sur Connect (Connexion). Pour les rseaux double bande, assurez-vous de vous connecter aux deux bandes, 2,4 GHz et 5 GHz.

SSID : les noms des rseaux sans fil situs proximit. GHz : la bande radio (en GHz) des rseaux sans fil situs proximit. Signal Strength (Puissance de signal) : l'intensit du signal sans fil reu : point

seul = 25 %, point + une onde = 50 %, point + deux ondes = 75 %, point + trois ondes = 100 %. Si aucune onde ne s'affiche, soit votre amplificateur est trop loign du point d'accs en amont, soit le signal est bloqu. Essayez de garder une puissance de signal entre 50 % et 100 % pour des performances optimales.

Security (Scurit) : le mode de scurit qu'utilisent les rseaux sans fil proximit.Si un rseau prend en charge la configuration selon la norme Wi-Fi Protected Setup, l'icne WPS s'affiche galement.

31

Spcifications

RE4100W Nom du modle Linksys RE4100W Description Amplificateur de porte sans fil N double

bande Numro du modle RE4100W Normes IEEE 802.11n, 802.11g, 802.11b, 802.3u Ports Ethernet, audio, alimentation

Boutons Reset (rinitialisation), Wi-Fi Protected Setup, marche/arrt (modle europen seulement)

Voyants DEL Alimentation, WPS, Ethernet (liaison, activit) Antennes 2, internes

Scurit sans fil Wi-Fi Protected Access 2 (WPA2), Wi-Fi Protected Access (WPA), WEP

Bits de cl de scurit Cryptage de donnes jusqu' 128 bits

Environnement d'exploitation Dimensions 67 x 38 x 105 mm (2,64 x 1,49 x 4,13 po)

Poids 5,12 oz (158 g)

Alimentation 12 V c.c., 1,0 A

Homologations FCC, ICES-003, RSS210, CE, Wi-Fi (IEEE 802.11a/b/g/n/ac), WPA2, WMM, Wi-Fi Protected Setup

Temprature (marche) 0 40 C

Temprature (entreposage) -20 60 C

Humidit (marche) 10 80 %, sans condensation

Humidit (entreposage) 5 90%, sans condensation

Les spcifications peuvent changer sans pravis.

32

RE3000W V2 Nom du modle Linksys RE3000W V2 Description Amplificateur de porte sans fil N Numro du modle RE3000W Normes IEEE 802.11n, 802.11g, 802.11b, 802.3u Ports Ethernet, alimentation

Boutons Reset (rinitialisation), Wi-Fi Protected Setup, marche/arrt (modle europen seulement)

Voyants DEL Alimentation, WPS, Ethernet (liaison, activit) Antennes 2, internes

Scurit sans fil Wi-Fi Protected Access 2 (WPA2), Wi-Fi Protected Access (WPA), WEP

Bits de cl de scurit Cryptage de donnes jusqu' 128 bits

Environnement d'exploitation Dimensions 67 x 38 x 105 mm (2,64 x 1,49 x 4,13 po)

Poids 5,12 oz (158 g)

Alimentation 12 V c.c., 1,0 A

Homologations FCC, ICES-003, RSS210, CE, Wi-Fi (IEEE 802.11a/b/g/n/ac), WPA2, WMM, Wi-Fi Protected Setup

Temprature (marche) 0 40 C

Temprature (entreposage) -20 60 C

Humidit (marche) 10 80 %, sans condensation

Humidit (entreposage) 5 90%, sans condensation

Les spcifications peuvent changer sans pravis.

33

Rendez-vous sur linksys.com/support/ pour communiquer avec le soutien technique prim et disponible 24 h/24 et 7 j/7 BELKIN, LINKSYS et de nombreux noms de produits et logos sont des marques de commerce du groupe de socits Belkin. Les autres marques mentionnes sont la proprit de leur dtenteur respectif. Les licences et la documentation relatives aux logiciels tiers utiliss dans ce produit peuvent tre consultes l'adresse suivante : http://support.linksys.com/en-us/license. Pour toute demande relative au code source LPG ou toute autre question, veuillez communiquer avec nous l'adresse http://support.linksys.com/en-us

Manualsnet FAQs

If you want to find out how the RE3000W Version 2 Linksys works, you can view and download the Linksys RE3000W V2 RE4100W N300 N600 PRO User Guide on the Manualsnet website.

Yes, we have the User Guide for Linksys RE3000W Version 2 as well as other Linksys manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User Guide should include all the details that are needed to use a Linksys RE3000W Version 2. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Linksys RE3000W V2 RE4100W N300 N600 PRO User Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Linksys RE3000W V2 RE4100W N300 N600 PRO User Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Linksys RE3000W V2 RE4100W N300 N600 PRO User Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Linksys RE3000W V2 RE4100W N300 N600 PRO User Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Linksys RE3000W V2 RE4100W N300 N600 PRO User Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.