LG N2B1 N2R1DD2.AUAR01I Storage User Guide PDF

1 of 160
1 of 160

Summary of Content for LG N2B1 N2R1DD2.AUAR01I Storage User Guide PDF

N2B1 / N2R1

User Guide and Instruction Manual

LG Network Storage

Safety warning

2

Safety warning

Note

1 Do not place any objects within 15cm of the unit.

The unit reaches high temperatures creating the risk of burn injuries.

2 Only use compatible devices with the system ports, or the system and devices

risk being damaged.

3 Do not use damaged disks. Product can be damaged.

4 Do not dismantle or change the structure of the system in any way. This may

cause electric shock.

5

When dealing with system components, strictly abide by the instruction manual.

Physical contact with the soldering on the backside of components may cause

severe injury.

6

When transporting the system, first turn off the system and disconnect the unit

from the power source. Sudden tension in cables can cause severe damage to

the system. Loose cables can cause injury.

7

Take caution when handling the system so as not to corrupt the hard disk data.

- Take caution not to bump or expose the system to extreme temperatures, as it

may damage the sensitive hard disk.

- Take caution when turning on the electricity, as during this time any external

bumps to the system may corrupt the hard disk data.

- The manufacturer disclaims all responsibility for loss of hard disk data.

Safety warning

8

Related to damage to the HDD and data:

- during installation or disconnection of the system, ensure that the system

does not experience any external physical shocks.

- During the operation of the HDD, short surges and stoppages of power may

cause the system to turn off and on quickly.

- there may be a sudden stoppage of electricity during operation

- avoid moving the system during operation of the HDD, which may cause

external physical shock

- during the configuration of new volumes.

i) if during use, existing volumes are deleted and new volumes are created,

data will be lost.

ii) Before configuration of new volumes, each user must back up data, as well

as when creating new volumes, to ensure the possibility of restoration.

e.g. virus infections.

Always back up hard disk data to avoid accidental data loss.

9

In the event of the administrator forgetting the password, restoration is

impossible. Hence safeguard the password.

To create a new password, the system must be re-initialized. In this case, all

data will be lost, and data recovery will be impossible, for security reasons.

The manufacturer disclaims all responsibility in the event of this occurrence.

10 In the event of the cover being removed during operation, the user risks

electric shock, injury, and damage to the system.

Safety warning

Warning

1 Do not use damaged electrical cords. This may cause electric shock, and is a

fire hazard.

2 Use a grounded cord and grounded socket to avoid electric shock and damage

to components.

3 Do not handle the electrical cord with wet hands, as this may cause shock and

injury.

4 When removing the plug from the socket, ensure that the plug is handled and

not the cord. Otherwise this may cause damage to the plug and even fire.

5 Always check and use correct voltage to avoid electric shock, severe damage

to the system, and fire.

6 Always use grounded cords and grounded sockets with correct capacity

(voltage / current) to avoid the danger of damage, electric shock, and injury.

7 In the event of noise emanating from the electrical cords or sockets, to avoid fire

and injury immediately disconnect, and contact the service centre.

8 Ensure that electrical cords are correctly plugged into the sockets to avoid fire.

9

Ensure that electrical cords are not damaged or do not have heavy objects

placed on them. Keep electrical cords away from children and pets. Damaged

cords may cause electrical shock or fire.

10 Keep the power cords and sockets clean at all times to avoid fire and electrical

shock.

11

In the event of moisture entering the system, immediately disconnect the

power and contact the service centre, to avoid the danger of system damage,

electrical shock, and fire.

12 Do not block vents, as this will cause system damage.

13 Prior to cleaning the system, always disconnect the power, to avoid damage and

electric shock.

14 In the event of lighting and thunderstorms, immediately physically disconnect

the system from any power source, to avoid damage to the system.

Safety warning

15

In the event of dropping the system, contact the service centre for advice and

possible service. Not doing this creates the risk of damage, fire and electric

shock.

16 Keep the system away from direct sunlight to avoid overheating, and melting of

the case, which may eventuate in fire and injury.

17 Do not place flammable objects, candles or cigarettes on the system, as this

may cause fire

18 In the event of a burning smell or smoke emanating from the system,

immediately disconnect the power, and contact the service centre.

19

Keep heating devices and other electrical components at a distance from the

system to avoid case melting, and hence the danger of damage, fire, and

electric shock.

20 Before disassembling the system, always ensure physical disconnection of the

electrical cable from the socket.

21 Do not disassemble the power supply, to avoid the danger of electric shock.

22

Keep children away from the system, as consuming any parts will cause serious

injury. In the event of swallowing any parts, such as screws, immediately seek

medical treatment.

23

Ensure that multipoint power sockets are not overloaded, to avoid the danger

of fire and electric shock. Ensure that cords are always neatly arranged and

are not trapped under the system or other heavy objects. When connecting and

disconnecting the electrical cord, take care in handling the socket to avoid the

danger of electric shock.

24 Ensure that there are no loose or exposed metallic objects inside the case, to

avoid the danger of damage, fire and electric shock.

25 Ensure that hands are never used, to avoid damaging the system and electric

shock. Always use screw drivers for work inside the system.

Contents

Safety warning ..................................................... 2

1. Introduction ....................................................10

LG Network Storage Introduction.........................................10

Supported OS ..................................................................11

Package Contents ............................................................12

Name of Each Part ............................................................13

2. LG Network Storage Installation .........................1

Hard disk installation and setup .........................................14

LG Network Storage Installer installation (LG Network Storage system file installation,volume and RAID configuration) ..........18

LG Network Storage Connection .........................................20

LG Network Storage PC S/W Installer installation (PC Application program installation and usage) .........................21

PC application program installation ............................................ 23

PC Application Program Usage ................................................. 24

. LCD panel and front button usage ......................2

Power Off / On (POWER button) ..........................................32

Icon Description ...................................................................... 33

Action set-up (, buttons) .........................................34

Information Mode .................................................................... 35

IP SETTING MODE ................................................................... 37

USB Back-up Mode ................................................................. 39

ODD Backup Mode .................................................................. 41

Backup data on discs using LG Network Storage (ODD Backup) ...............41

Hibernation Mode ..............................................................................44

Tray open / close (DISC OPEN button) .................................45

Contents

Contents

. LG Network Storage Web Menu Use (for LG Network Storage administrators) ....................................

System Settings ................................................................46

Network ................................................................................. 46

Host ................................................................................................47

Interface ..........................................................................................47

Workgroup/Domain............................................................................50

Remote Access ....................................................................... 51

DDNS (Dynamic DNS) .........................................................................51

Date & Time ............................................................................ 53

Date and Time Setup ..........................................................................53

NTP Set-up ......................................................................................54

Mail Notification ...................................................................... 54

Volume Set-up........................................................................ 56

Volume Configuration .........................................................................56

Add disk ..........................................................................................58

Remove disk .....................................................................................59

Hot Swap..........................................................................................59

Trahsbox ..........................................................................................60

Selective Mirror (Selective data protection for folders) ................. 61

Add Selective Mirror List ....................................................................61

Edit Selective Mirror List .....................................................................62

Delete Selective Mirror List .................................................................62

Use Selective Mirror ..........................................................................62

Conditions ........................................................................................63

Power .................................................................................... 63

Hibernation Setup ..............................................................................64

UPS Power Setting .............................................................................65

Hibernation Mode On/Off ....................................................................66

Language Setting .................................................................... 70

Firmware ................................................................................ 71

Upgrade ...........................................................................................71

Initialization ......................................................................................73

Configuration Back-up .......................................................................74

Contents

LG Network Storage Share Management ..............................76

User ...................................................................................... 76

Group .................................................................................... 78

Folder ................................................................................... 80

Blu-ray / DVD ..................................................................82

Burning .................................................................................. 82

Service ...........................................................................86

DLNA(Digital Living Network Alliance) ....................................... 86

Network Server ....................................................................... 90

FTP .................................................................................................90

AFP .................................................................................................92

Network Printer ....................................................................... 93

iTunes ................................................................................... 97

Time Machine ......................................................................... 99

[Web Set-up] ....................................................................................99

[Mac OS] ........................................................................................101

iSCSI ....................................................................................103

[iSCSI Initiator Installation] ................................................................103

[Server Synchronization] ..................................................................104

[iSCSI Connection] ..........................................................................104

Torrent .................................................................................113

[Download] .....................................................................................113

[Use] .............................................................................................113

[Set-up] .........................................................................................114

USB Sync ...................................................................... 115

USB Device & Memory Card ....................................................115

Information .................................................................... 120

Status ...................................................................................120

Log ......................................................................................122

Top menu ..................................................................... 124

WebDAV ...............................................................................124

My Information .......................................................................126

Contents

. LG Network Storage web menu usage (Regular users) .............................................. 12

Blu-ray / DVD ................................................................ 127

Burning .................................................................................127

Top menu ..................................................................... 131

My Information .......................................................................131

. LG Network Storage via network drive .............. 12

Accessing the LG Network Storage data in Windows OS ....... 132

MAC OS connection ........................................................ 136

Linux OS access ............................................................. 139

. LG Network Storage Maintenance .................... 12

LG Network Storage shut down/restart .............................. 142

Administrator password and network set up initialization ...... 143

System information checking and saving ............................ 144

Self-diagnosis execution ................................................. 144

System failure or malfunction ............................................ 145

Power cut or failure ......................................................... 145

System temperature protection ......................................... 145

. RAID trouble shooting ..................................... 1

Appendix A Volume Construction & RAID Configuration ....... 148

Appendix B Technical Support ......................................... 152

Appendix C Open source software notice .......................... 153

Appendix D Compatible/Recommended Device List ............ 159

1. Introduction

10

1. Introduction

LG Network Storage Introduction

Thank you for purchasing the LG Network Storage.

1) Now the LG Network Storage basic data-save and share functions can be used in

Windows, Mac and Linux operating systems.

2) Similarly, the internal Blu-ray / DVD rewriter can be used to efficiently save data

securely for long periods.

3) Furthermore, the Blu-ray / DVD drive can be used when directly copying data from

discs to LG Network Storage.

1. Introduction

11

4) The LG Network Storage also allows for mobile synchronization, without the use of a

PC, as mobile devices can be directly synchronized to the LG Network Storage.

This user manual contains express installation information as well as detailed options

and functions.

Supported OS

LG Network Storage

Windows XP, Server 2003, Vista

Mac OS 10.x or later

Linux (Redhat, Suse, Ubuntu)

PC S/W

PC S/W Supported OS

NAS Detector Windows XP, Server 2003, Vista, Mac OS 10.x or later

NAS Monitor Windows XP, Server 2003, Vista

Comnso Backup Windows XP, Server 2003, Vista

Photo DVD Album Windows XP, Server 2003, Vista

CyberLink Windows XP SP2 or later, Vista

Acrobat Reader Windows, Mac

Flash Player Windows, Mac

1. Introduction

12

Package Contents

LG Network Storage Product warranty

LG Network Storage PC Software Installer

Quick install guide

N2B1 / N2R1

LG Network Storage

Quick install guide

Power cord and adaptor LAN cable

Hard disk fastening screw (x8) enclosure only

* Photographs of images from the manual may differ depending on model components.

1. Introduction

1

Name of Each Part

Power button: power on, off (to turn off power, hold button in for 3 seconds without release).

SET (S) button: selects mode. Pressing the SET button at waiting mode allows a quick view of the IP information. Button is used to change number setting during IP set-up

Left arrow button (<-): navigates menu, moves cursor for IP settings

Right arrow button (->): navigates menu, moves cursor for IP settings Mode button: changes mode

Memory card reader: supports SD, MMC, MS and XD

Memory card Current state display LED: - Blue : running correctly

USB port: USB 2.0 interface

LCD window: displays current state

HDD/ODD state display LED: - Blue : running correctly - Red : abnormal state

Disk Open button: opens/closes optical disc drive tray

Blu-ray/DVD Drive

USB port: USB 2.0 interface

LAN port: LAN cable connection.

e-SATA: External SATA II device support

DC jack: Power adaptor connection

Fan

Kensington lock: Antitheft lock

Adaptor cable holder: Prevents the adaptor cable from unplugging.

2. LG Network Storage Installation

1

2. LG Network Storage Installation

Follow these instructions to install the LG Network Storage. If the LG Network Storage

is internal, go to , otherwise go to

Storage connection>

Hard disk installation and setup

The LG Network Storage hard disk rack is shown below. Refer to each part while

installing the HDDs.

Components of Hard Disk Rack

Hard Disk

Rack Lever

Hard Disk Rack

Label No.

Lock Button

Hard Disk Rack

Note) If the disk sizes differ, the RAID configuration will use the smallest

disk as a reference to measure all disk sizes, therefore the remainder can

not be utilized and durability decreases.

2. LG Network Storage Installation

1

First, ensure that the power is off.

Open the front cover of the LG Network Storage main system.

Unlock the hard disk rack by pushing the lock button upward.

Hold down the hard disk rack lever and pull the hard disk rack to separate it from

the main system.

Insert the hard disk into the hard disk rack, and with a screw driver, screw the four

screws into place.

* If the Hard disk has been in use, all the data on it will be lost.

2. LG Network Storage Installation

1

Match the hard disk rack label number and the LG Network Storage front panel

number, to insert the hard disk rack into the slot.

Push the hard disk rack into the LG Network Storage main system until it makes a

click.

2. LG Network Storage Installation

1

To prevent accidental detachment of the hard disk rack, push down the lock button.

Similarly repeat the installation procedure for all the hard disks, one by one.

2. LG Network Storage Installation

1

LG Network Storage Installer installation (LG Network Storage system file installation,volume and RAID configuration)

Connect the enclosed power adaptor to the DC jack. Plug the power cord into an electrical outlet.

Once the power adaptor is connected to the DC jack, connect the power cord to the

outlet.

While holding down both <- and -> buttons, press the POWER button once. Once the Enclosure_Mode message pops up, let go of the arrow buttons.

9

Once Enclosure mode is complete, the LG Network Storage will automatically reboot itself. In the case that the power shut down abnormally before the system successfully reached Enclosure mode, please return to step 2 and re-run Enclosure mode.

2. LG Network Storage Installation

1

System loads system files as it reboots. LG Network Storage shall not be accessed during the system reboot process.

After approximately 60 seconds, system reboot is completed with a light alarm sound. (In the case that network connection has been activated)

All basic installation required for running the LG Network Storage has been completed.

In order to configure the volume required for storage of the LG Network Storage user

data, please refer to Chapter 4 and use the web.

* At RAID configuration, the hard drive number and size will determine the RAID

configuration time.

Total HDD Capacity System File Installation

Volume and RAID [Individual disks]

Volume and RAID [RAID 1]

500GB (250 GB * 2) Approx. 10 minutes

Approx. 5 minutes

Approx. 1 hour

1TB (500 GB * 2)) Approx. 10 minutes

Approx. 10 minutes

Approx. 1-2 hour

2TB (1 TB * 2) Approx. 10 minutes

Approx. 20 minutes

Approx. 4-5 hour

Note: It is recommended not to use the LG Network Storage while RAID configuration, as this will cause retardation.

* If the Hard disk has been in use, all the data on it will be lost.

2. LG Network Storage Installation

20

LG Network Storage Connection

In an environment with a DHCP server, selecting automatic IP search after connecting

the LG Network Storage to the IP router/switch/hub will acquire the network information

from the DHCP server. For a particular IP address allocated from the Network IP

administrator, installation using an IP address, subnet mask, default gateway and

allocated DNS information is simple.

Using the included LAN cables, connect LAN ports on LG Network Storage and

network devices(home router/router/switch/hub) to each other or directly plug

them into the LAN port on the PC.

A. If the network component (home router/router/switch/hub) is used to connect

the LG Network Storage (home router/router/switch/hub) to the PC, use the

following

LG Network Storage

Internet

Desktop PC

Notebook

home router / router / switch / hub

B. If the LG Network Storage is connected directly to the PC without another

network device,

it must be connected directly to the PC using a LAN cable, the LG Network

Storage IP must be set to DHCP, the PCs IP set to automatic setting and the

network will be automatically set up after approximately 2 minutes

LAN Cable

Desktop PCLG Network Storage

2. LG Network Storage Installation

21

* If the LG Network Storage is directly connected to the PC through a LAN

cable, the PCs local internet will not be accessed In this case, PC Internet

may be disconnected.

After checking that the LG Network Storage power cable has been connected,

press the power button in the front to activate the LG Network Storage.

LG Network Storage PC S/W Installer installation (PC Application program installation and usage)

The LG Network Storage PC Software Intaller CD enclosed with the LG Network

Storage product purchased includes the following programs:

1. NAS Detector

The NAS Detector quickly and easily detects the LG Network Storage on the

users network.

2. NAS Monitor

The NAS Monitor allows real-time access to the status of LG Network Storage and

scheduled back-up programs

3. Comnso Backup

The Comnso Backup program allows real-time or scheduled back-ups of

important data from the clients PCs to the LG Network Storage. Files backed up

may be recovered any time for use as necessary.

4. CyberLink

CyberLink helps utilizing the ODD of the LG Network Storage.

5. Photo DVD Album

The Photo DVD Album program is a search program of all media files stored within

the users PC or the LG Network Storage. It also provides functions to burn media

or play movies

2. LG Network Storage Installation

22

Available programs for installation may vary depending on users OS environment

Program Supported Operating System

Windows Mac Linux

Acrobat Reader O O -

Flash Player O O -

NAS Detector O O -

NAS Monitor O - -

Comnso Backup O - -

CyberLink O - -

Photo DVD Album O - -

2. LG Network Storage Installation

2

PC application program installation

Insert the LG Network Storage PC Software Installer CD in the PCs optical drive

(CD/DVD/BD drives). After a short while, the following menu will appear.

* Installation on PCs without a fiber optic drive may be processed using the iSCSI

function of LG Network Storage. Please refer to 4 Service iSCSI.

2-19

Flash Player Installation is required to fully utilize the LG Network Storage web

menu. If the users PC doesnt not already have the Flash Player installed, proceed

with installation by clicking on the icon .

Click the NAS Detector button and install NAS Detector on the users PC.

After installation the shortcut icon will appear.

To install the Comnso Backup program, click on the Comnso Backup button.

To see the LG Network Storage User Manual, click on the User Manual button.

2. LG Network Storage Installation

2

PC Application Program Usage

This explains how to use NAS Detector For a detailed explanation for the bundle program, please refer to the built-in manual after installing the program. (Comnso back-up/Photo DVD Album/CyberLink group)

<NAS Detector usage>

After checking that the PC network is intact, double click the NAS Detector icon

on the desk top to open the program.

The NAS Detector will automatically search the LG Network Storage connected to

the users PC.

When the searching is completed, the LG Network Storage IP Address, MAC

Address, and Host Name information are displayed on the screen.

The factory default settings are shown below.

- MAC Address: serial number for each LG Network Storage product is printed in

the back label.

- Host Name : LG-NAS

2. LG Network Storage Installation

2

* If the desired LG Network Storage is not found, click again on the Search

Network button to restart the search. If the search on the NAS Detector is

unsuccessful, re-check the Network connection. For manual setup see section

.

If the search result of the LG Network Storage information is chosen, as well as

default network information of the LG Network Storage, including the Subnet mask,

Default Gateway and DNS, Change Network Info, Open Web Menu and Open

Network Folder buttons will appear.

* For the NAS Detector to properly function, the PC needs to be connected to the

same home router/router / switch / hub as the LG Network Storage.

2. LG Network Storage Installation

2

Change Network Info can be selected to change the IP address.

The DHCP selection option appears if a router is used or if there is a DHCP server

on the network.

* If no IP address is allocated, use the IP address NAS Detector or check the

DHCP option and automatically assign an IP address

If the Open Web Menu button is clicked, the web menu of the selected LG Network Storage can be accessed.

2. LG Network Storage Installation

2

If the Open Network Folder button is clicked, the LG Network Storage network

folder can be accessed.

In selecting Open Web Menu or Open Network Folder, a pop up message

appears with Yes, which when selected will produce a shortcut icon on the desk

top, and after which the LG Network Storage web menu and network folder can be

easily accessed.

NAS web menu shortcut NAS network folder shortcut

2. LG Network Storage Installation

2

< Using the LG Network Storage web menu >

The web menu offers LG Network Storage management features such as Network

Information, Share management, and Service management. It also offers menus to setup

data storing using Blu-ray/DVD drives and synchronized storage of mobile devices.

Double click on the LG Network Storage web menu shortcut button.

The LG Network Storage web menu can be used, after inputting user ID and

password. The LG Network Storage default ID and password are admin and

admin.

* A system idle for 40 minutes after log-in will automatically log off for security

purposes.

After logging in, use the LG Network Storage data set-up, share management, service management, Blu-ray/DVD drive, and mobile sync. features. The detailed

information can be found in .

2. LG Network Storage Installation

2

File share and store can be performed, similar to the internal or external HDDs

connected to the PC.

Double click the LG Network Storage network folder shortcut.

The LG Network Storage Blu-ray/DVD drive under folder name cdrom and service / volume will appear.

To view the contents of the disc inserted in the LG Network Storage, double-click

on the cdrom folder, and to access the LG Network Storage hard disc, double-

click on either folder volume1 or volume2.

* If the contents of the LG Network Storage cdrom folder are not displayed

correctly, please push the refresh button.

* The default ID and password for the LG Network Storage are admin and admin.

* Folders volume / service will only appear after the user has completely

configured the volume through the web menu.

2. LG Network Storage Installation

0

The NAS Monitor offers various functions for the user to easily utilize the LG Network

Storage. For example, user can access the network folder or web pages by simply

clicking the MAS Monitor menu.

The NAS Monitor basically obtains an IP address through automatic connection with LG

Network Storage. This allows the user to easily access the network folder or the web

even after a change of IP address without changing the settings.

The NAS Monitor icon will show up as Windows tray icon when the program running, on

the right bottom side of the desktop. The below screenshot captures the menu shown

when the user hits the right-click of the mouse.

2. LG Network Storage Installation

1

Web menu is used to access the web page.

Network folder is used to open the network folder. Double-clicking the left button of the

mouse will open the network folder.

This is used to log on to the FTP server.

The NAS Detector program is run to change the IP address of the LG Network Storage.

This menu will properly function only after the NAS Detector has been completely

installed.

This function is used to change the LG Network Storage mode from maximum energy

save mode to normal mode. This procedure usually takes approximately 1 minute.

Using one LG Network Storage will automatically set up an IP address for the NAS

monitor. However, using multiple LG Network Storages may forward too many messages

to the NAS Monitor while not knowing to which LG Network Storage the message is

being sent at the selection of a menu. Therefore, designating one LG Network Storage

may allow information for that specific LG Network Storage to be processed.

This menu shows the last message sent.

This menu hides the message sent from LG Network Storage.

. LCD panel and front button usage

2

. LCD panel and front button usage

Once the booting is complete, the default LG Network Storage screen will be as follows.

* If the LAN cable is unplugged, the network icon ( ) will not appear on the LCD window. If the network connection is unstable or in the middle of acquiring the IP

address, the network icon ( ) may blink.

Power Off / On (POWER button)

Power On

After pushing the POWER button on the front panel, the following message appears,

activating the LG Network Storage.

Power Off

Pressing the POWER button for longer than 3 seconds will shut down the system after showing the below message.

. LCD panel and front button usage

Icon Description

Icon shows the status of the network connection. It is deactivated if the LAN cable

is disconnected and blinking if connected. The icon will also blink if the IP address

has been set up to be acquired automatically (DHCP) or in the process of acquiring

IP address.

Icon is activated when user has logged on to LG Network Storage by opening the

network folder.

Icon is activated when the memory card/USB/e-SATA devices are connected.

Icon is activated when CD/DVD/BD media are inserted to the BD/DVD drive.

Icon is activated when volume is configured to save the users data. If this icon

is not yet activated, user may not send any file to LG Network Storage even by

opening the network folder and may not be able to use the USB back-up or the

ODD back-up functions.

. LCD panel and front button usage

Action set-up (, buttons)

Pressing the , buttons in the front will allow access to various functions of LG

Network Storage. Action modes activated by using the arrow keys are as follows:

Action modes comprises 6 modes of [Stand-by Screen] [Information Mode] [IP

Setting Mode] [USB Back-Up Mode] [ODD Back-Up Mode] [Hibernation Mode] in

order and user may navigate through the modes by using either or button.

For each action mode press the Set (S) button in the relevant mode.

. LCD panel and front button usage

Information Mode

Information Mode shows the current status and information of LG Network Storage.

Once in the [Information Mode], user may use the arrow keys to move through [IP

Address Information] [System Firmware Version] [HDD Usage Capacity] [Date and

Time] [Fan RPM Information].

[IP Address Information]

Mode allows user to check the IP address set up.

* Pressing the Set key from the stand-by screen will allow a quick view of the IP address

* If IP address is set up for automatic acquisition (DHCP), IP address may temporarily appear as 000.000.000.000 in the process connecting to the DHCP server.

[System Firmware Version Information]

This shows the version of the system firmware installed.

[Micom Firmware Version Information]

This shows the version of the Micom firmware installed.

. LCD panel and front button usage

[HDD Usage Capacity]

This shows the hard disks used-up capacity in comparison to its total capacity in

percentage (%).

* If the volume is not configured in advance, HDD Config First will appear.

[Date and Time Information]

This shows the current date and time set up in the LG Network Storage.

[FAN RPM Information]

This allows to check the current Fan rotation per minute of LG Network Storage.

. LCD panel and front button usage

IP SETTING MODE

The LG Network Storage IP can be set up by using the Set key and entering [IP

SETTING MODE].

The arrow keys may be used to navigate through menus [Manual IP set-up] [Automatic IP set-up] [Return to stand-by screen], and the Set key may be used to enter any of the menus.

[1] Static IP [2] DHCP IP [3] Cancel Se tup

For Manual IP set-up, please follow the following orders:

Press the Set button once [1] Static IP appears. The below message will pop up.

Press the Set button again.

It will show the current IP address and the cursor will be placed on the first digit. Pressing the Set button will increase the number by 1. Once the intended number is reached, press the right arrow key to move onto the next digit. To return to the previous number, press the left arrow key to move the cursor to the left.

. LCD panel and front button usage

Pressing the right arrow key from the last digit will move the cursor to the next set- up value.

Press the Set key.

Set up the network mask value following the procedure for the IP address set-up.

Press the Set key.

Set up the gateway address following the procedure for the IP address set-up.

* LG Network Storage recommends that user manually sets up the IP address given to the IP administrator in order to prevent potential clashes with a router or any other network devices.

. LCD panel and front button usage

USB Back-up Mode

LG Network Storage provides functions to easily store data from USB, memory card, or

other removable disks to the LG Network Storage with a simple click of a button.

Note: Certain memory cards may require an adaptor. (A list of memory cards

compatible with LG Network Storage may be found on http://www.lge.com. LG Network

Storage may not function properly if a memory card, not listed on the website, is to be

used.

[Simple Back-up OneTouch Back-up]

Connect the USB or the memory card to LG Network Storage. As soon as the system

reads the device, the following message will pop up.

To back-up press the Set(S) button, and to cancel press the left button (L) .

*In the case that several types of external devices are plugged in, back-up will

take place for the device plugged in last.

Progress of data saved will appear in percentage (%).

Once back-up is completed, a folder named after the manufacturer company of

the storage device will be created within the service/back-up/USB folder. This will

allow to distinguish this folder from other devices in the future. Subfolders will be

created by back-up date to save all contents of the USB or the memory card in LG

Network Storage.

. LCD panel and front button usage

0

Folder names will be set up automatically as follows:

Saved in Folder name

Service/back-up/

USB

Manufacture company name_Serial No./ File back-up

format /Date folder created

In the case of simple back-ups, if one storage device is backed up several times,

the data from the final back-up will be saved under the Last Backup folder.

If one device is backed up more than once on one day, a serial number will follow

the date. The folder created for the very first back-up will include all data from

the external storage device, and subsequent back-ups will only save additional

folders or files compared against the previous back-up data.

For more details on the Last Backup folder, refer to Chapter 4 USB Synchronize

Set-Up.

[USB Back-up Mode]

Using the arrow keys to move to USB Back-up Mode and pressing the Set key will

activate the same way as the simple back-up.

For USB back-up, user may log on to the webpage and set up the relevant sections.

For more details on the Last Backup folder, refer to Chapter 4 USB Synchronize

Set-Up.

. LCD panel and front button usage

1

ODD Backup Mode

Backup data on discs using LG Network Storage (ODD Backup)

LG Network Storage provides functions to back up data saved in optic disks such as

CD/DVD/Blu-Ray on to LG Network Storage with a simple click of a button.

Insert the optic disk to be backed up in the LG Network Storage BD/DVD drive.

Once the system reads the optic disk, the optic disk type will appear in the front of

the LCD.

Once the optic disk is recognized, use the arrow keys to mode to [ODD Back-up

Mode] and select using the Set key.

Once in the [ODD Back-up Mode], use the arrow keys to select the 3 types of

menus as shown below:

[1] Da ta Copy [2] Im age Copy [3] Cancel Copy

Select the preferred back-up method and pressing the Set key will initiate

back-up.

Progress of data saved will appear in percentage (%).

. LCD panel and front button usage

2

Pressing button will cancel the job at any time.

Once back-up is completed, the following message will pop up:

[Data Copy]

This is a function to back up the content of the disk on to LG Network Storage just as it

was originally in the disk.

Selecting the Data Copy function will back up users data in subfolders created by

back-up date under service/back-up/disc-data folders. If Data Copy is executed more

than once on one day, a serial number will follow the date.

. LCD panel and front button usage

[Image Copy]

This backs up contents in the disk in iso image file formats.

Once back-up is complete, users data is saved in subfolders created by back-up date

under service/back-up/disc-image folders. If back-up takes place more than once on

one day, a serial number will follow the date.

However, Image Copy will not function properly in one of the following cases:

If the optic disk is copyrighted, unsupported disc message will appear on the

LCD and back-up will not be processed.

Disks recorded in multi-sessions will not support Image Back-ups.

. LCD panel and front button usage

Hibernation Mode

Hibernation Mode shuts down all services of NAS and minimizes the energy used in

the overall system including the HDD to run NAS in maximum energy save mode. In the

maximum energy save mode, all of the above icons will disappear.

To change from the Hibernation Mode to normal mode, press any one of the keys

except the Power button. Logging on to the webpage and entering the administrators

password will also change the setting to normal mode.

In the Hibernation Mode, the majority of the services will not be accessed including

SMB (Samba). Maximum energy save mode will not be available while iSCSI function is

activated.

. LCD panel and front button usage

Tray open / close (DISC OPEN button)

Pressing the DISC OPEN button in the bottom front will open the tray on which the disc

can be placed. Pressing the DISC OPEN button or softly pushing the tray when the

tray is open will close the tray.

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

System Settings

Network

In the Network setting menu, an important set-up needs to be made to connect the LG

Network Storage to the network. If the set up is not performed correctly, connection

problems will arise at later stages, hence care must be taken.

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

Host

Designate an LG Network Storage host name.

The server name has a limit of 12 characters, this can be a combination of letters,

digits, underscores and hyphens; the first characters though must be a letter or a

number.

Names permitted: LG-NAS, LGNAS-123

Names not permitted: LG_NAS, -LGNAS,123-LG, LG-#, LG/N

Type in host description.

The host description has a limit of 24 characters; this can be a combination of

letters, digits, underscores, hyphens and spaces. This explanation only affects the

Windows client.

Interface

The Network interfaces IP properties are specified. During system connection, care

must be taken as restrictions may be created.

If an IP address is provided by the network administrator or there is a specific IP

address user would like to use, select Manual IP Set-up and enter the IP address,

subnet mask, default gateway and DNS address.

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

IP address: Enter desired IP address.

Subnet Mask: Enter the subnet mask that suits the current network environment.

Default Gateway: Define the outgoing route. If no gateway exists on the

network, enter the IP address.

Default DNS server address: The DNS handles conversions between domain

names and IP addresses. If the DNS is not correctly configured, e-mails, DDNSs

or domains will not function normally.

Secondary DNS server address: Enter the secondary DNS server address.

* If accurate values are unknown, please contact the internet service provider (ISP)

or the network administrator.

[To acquire an IP address automatically]

In order to acquire an IP address automatically, select Acquire IP address automatically

(DHCP). This option may used if there is a DHCP server (or internet router) within the

network. Once the DHCP option is activated, the connection with the web menu will be

terminated and a new IP address should be confirmed through the LCD screen or the

NAS Detector program. DHCP set-up will regularly renew the users IP address from the

DHCP server, causing unintended IP address changes, and require close attention.

In the case that it is set up for automatic IP address without a DHCP server within the

network, a Link Local address such as 169.254.XXX.XXX will automatically be set up

automatically. This can be used when the PC and network cable are directly connected

and the PCs address is also set up to Acquire IP address automatically.

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

[Ethernet Frame Size Set-up]

Configure ethernet frame size. If frame size is unknown, set it to 1500.

* Ethernet Frame Size: If the Ethernet frame size is at least 1500 gigabits, specified

files can be sent quickly and with ease. In this case, the LG Network Storage

alone does not change, but so do the PC and home router/router/hub/switch

frame sizes. Otherwise performance will be reduced.

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

0

Workgroup/Domain

Set up a workgroup and domains that the Windows network supports. This will allow for

access to the LG Network Storage shared folder in Windows. In addition to this, the LG

Network Storage domain service supports a Windows Active Directory, enabling the

import of existing user information, with ease and speed.

Select the appropriate Workgroup or Domain considering the environment where

the LG Network Storage will run.

When selecting Workgroup, input workgroup name required. Or when selecting

Domain, input domain name, domain administrator ID and password.

* Domain: In the active directory user environment, the domain settings should

not be created in the local User/Group folder, but should be created in the

domain User/Group folder. When the domain settings are created, the network

administrator must be available to provide assistance, as the user must have

access to all information concerning the Name server. If wrong information is

inputted, sharing and use of the LG Network Storage will be limited. In the event of

unfamiliarity with the Workgroup/Domain, use of default values is recommended.

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

1

Remote Access

DDNS (Dynamic DNS)

Using DDNS and connecting the LG Network Storage externally by domain name is

possible. (Example: http://myname.lgnas.com or ftp://myname.lgnas.com).

To record and connect the server IP address to the in the case of using a fixed IP

is possible, though the DDNS allows for a convenient connection in a dynamic IP

environment, where IP changes in time. Variation of IP address is monitored and

mapped to a domain name in real time. Therefore, there is no need to remember IP

address as there will be a fixed address. (e.g. myname.lgnas.com)

DDNS: Select Enable

Domain name: Input domain name to be used.

DDNS password: Input password.

Password is required in the case that domain name needs to be re-registered

for reasons of system initialization, replacement of LG Network Storage among

others. It is important to remember the password.

Click on the Apply button.

If Disable is selected after a domain name is registered, the previously

registered domain will be removed, thus the domain name cannot be registered

in other LG Network Storages. Caution must be taken at set-up.

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

2

[UPnP]

The UPnP port forwarding is used for LG Network Storage to directly receive

requests from the router connected to the LG Network Storage. Access to the LG

Network Storage from the outside using a DDNS usually requires a special set-up

for the router to forward network requests received by the router to the LG Network

Storage, and the UPnP port forwarding function allows the router to forward data

without a separate router set-up. (This option is only available if the router is such

that supports the UPnP port forwarding function.

Check whether the address of the router currently connected to the Network

Storage is properly displayed.

If the router address is properly displayed, it should display whether the routers

port forwarding function has been activated.

Select the Apply button.

If the router does not support the UPnP port forwarding function or the function is

deactivated, the UPnP port forwarding may not perform properly.

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

Date & Time

Set up the system time. In order for the files uploaded in the shared folder to

display the accurate time and log times, the system time should be properly set up.

Date and Time Setup

To manually set the date and time, click on the Edit button. Use standard time

zone to designate the current local region for LG Network Storage. The standard

time zone set-up may affect the NTP and domain user certification, so exact values

must be entered.

Local time will be used by clicking the Use Local Time button.

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

NTP Set-up

The Network Time Protocol (NTP) periodically aligns itself with an external time server to

obtain and synchronize itself with accurate time. This accurate time should continuously

activate the NTP. To use the Default Time Server, refer to pool.ntp.org server time.

Mail Notification

To use Mail Notification, the LG Network Storage usage amount can be periodically

checked. Registration information and results will be sent to users subsequent to their

new registration.

To configure the mail notification, click on the Edit button.

4. LG Network Storage Web Menu Use (for LG Network Storage administrators)

55

To use it check Enable if Disable is not used. If Enable is checked, proceed

with the following steps:

SMTP Server Address: Input the Mail Server address. Refer to the information

page in the network administrator Mail Service, and input the accurate SMTP

Server Address value. (e.g. smtp.mail.yahoo.com) In the case that the port

number used for the mail server is not the default value, the port number should

be recorded next to the server address. This would generally be the case when

the SMTP SSL has been designated. (e.g. smtp.gmail.com:446)

SMTP Authentication: When sending mail, dependant on the mail server, login

may be required. In the case of own mail server, the SMTP Authentication must

be activated. (e.g. Smtp.Webmail SMTP servers such as yahoo.com perform

certification processes. Refer to the user webmail service help)

SMTP SSL Support: Some mail servers login information is encrypted and sent.

At this time the SMTP SSL Support must be activated. (e.g. Smtp.Webmail smtp

servers such as gmail.com perform certification processes. Refer to the user

webmail service help)

Subject: The information email subject can be specified or changed.

Recipient Mail Address: Input the mail receipt administrators address.

Notification Trigger: Set up the information concerning the periodic use of the

HDD. In the case of not wanting to receive message periodically, the option may

be disabled.

HDD Status sending time: The HDD use information mail out frequency can be

determined (daily/weekly/monthly).

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

Volume Set-up

In order for data to be saved on to LG Network Storage, volume must be set up. If the

volume is configured the hard disk icon will appear on the far right side of the LCD in

the front, but if the volume is not configured, the disk icon does not appear and the

network drive connection, USB back-up, ODD back-up among other functions will not

be available.

This product provides the following 5 volume configuration methods for the users

requirement:

- RAID 0 (striping)

- RAID 1 for important data (mirroring)

- Linear (JBOD) volume

- RAID 1 (mirroring) + JBOD volume

- Single disks (disk 1, disk 2)

Appendix A includes detailed instructions on volume construction and it is

recommended to refer to the list of recommended hard disks by visiting the URL

provided in Appendix D.

When volume is configured, part of the hard disk is allocated to the LG Network

Storage system. Consequently, after volume configuration has been completed,

the size of the volume will appear smaller than the hard disk size.

Volume Configuration

To configure the volume, follow the below procedures. Configuration of the volume will

remove all existing users data in the hard disk and will not be recovered.

Log on to the web and open system volume.

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

On the top are the current volume array and a detailed description. If the volume

has not yet been configured, there will not be any detailed description.

The new volume configuration menu under change volume configuration

below comprises RAID 1 (striping), RAID 1 for important data (mirroring),

linear (JBOD) volume, RAID 1 (mirroring) + linear (JBOD) volume, and single

disks (disk 1, disk 2). Select one of the above and press the apply button.

RAID 1 (mirroring) + linear (JBOD) selection activates the slide bar below for size

selection. Move the slide bar to determine the size and press the apply button.

To use only one disk, user must set up single disks.

In the process of volume configuration, the web menu and the buttons in the front

will not be available. The configuration progress may be viewed through the LCD

in the front.

Format HDD1 20%

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

If either RAID 1 (mirroring) or RAID 1 (mirroring) + linear (JBOD) is selected,

the synchronization progress for the RAID 1 portion may be viewed on the web

screen.

Add disk

In the case that single disks is being used, new disks may be added by following the

below procedures.

Press the End button in the web, system power end.

Insert the second disk in the LG Network Storage and turn the power on. To add

new hard disks, refer to Chapter 2 LG Network Storage Installation.

In the web, log in and open system volume

Press the add/remove disk button above the change volume configuration.

Check the second disk inserted and press the add button.

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

Remove disk

Forced removal of the hard disk without following the remove disk functions provided in

this screen may cause future complications with system performance and loss of users

important data. Therefore, it is strongly recommended that user uses the remove disk

button on the web when removing hard disks.

In the case that single disks is being used, existing disks may be removed by

following the below procedures.

In the web, log in and open system volume

Press the add/remove disk button above the change volume configuration.

Check the disk to be removed and push the remove button.

Hot Swap

This device allows the replacement of hard disks without turning off the system power.

This option is only available when the volume configuration is set to RAID 1 or single

disks. Using this option for other volume configuration types may cause to lose even the

remaining hard disk data in the device.

Remove the disk following the procedures set out in [Remove disk].

With the power turned on, insert the new hard disk in the device by referring to

Chapter 2 LG Network Storage Installation.

Move to the webpage and select add/remove HDD.

Select the hard disk currently inactive and press the add button.

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

0

Trahsbox

Removing a file or folder when the network drive is still connected creates a trashbox and all deleted files are temporarily moved here. If user were to recover the deleted data, user may find the file or folder from the trashbox and move them to the intended location.

However, trashbox is created for each highest level folder and there will be as many trashboxes as the number of users folders. In the case that user runs out of hard disk capacity and must empty all trashboxes, user may click on the recycle bin icon on the volume web screen and empty all contents of the trashbox. .

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

1

Selective Mirror (Selective data protection for folders)

The Selective Mirror function automatically generates copies of certain folders, which allows data recovery even after the loss of source data.

Add Selective Mirror List

Choose Selective Mirror activation. Pressing the add button will move the screen to add a new list.

Under source path, select the folder to be backed up and under destination path select the folder that will save the back-up data.

Once the save button is pushed, a new list will have been added.

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

2

Edit Selective Mirror List

Checkbox the item to be edited and press the edit button.

* Only one item can be edited at a time.

Edit the source path and the destination path and press OK to confirm the

edited set-up.

Delete Selective Mirror List

Checkbox the item to be deleted.

* More than one item at a time can be deleted.

Press the delete button to confirm the deleted set-up.

Use Selective Mirror

If SMB (Samba) and FTB is used to store data in the LG Network Storage and a change

incurs in the source folder, the same change will apply to the destination folder and the

source folder will be double protected.

* To maximize the effects of Selective Mirror, it is recommended to set up different

volumes for the source folder and the destination folder. (for the single disks

setting or the RAID 1+ linear volume setting)

Example)

source folder: volume1/source

destination folder: volume2/destination

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

Conditions

The source folder and the destination folder cannot be the same folder.

One source folder may have up to 4 destination folders.

A folder designated as a source folder cannot be designated as a destination folder

in another setting.

A subfolder of a source folder cannot be designated a destination folder.

A folder designated as a destination folder cannot be designated as a source folder

in another setting.

Power

Settings related to power for the LG Network Storage can be adjusted (Hibernation, UPS

and System Shutdown).

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

Hibernation Setup

This allows all LG Network Storage hard disks to transition into stand-by to minimize

energy consumption after a certain period of no data transfer. Reading or writing LG

Network Storage data during the hibernation mode will gradually reactivate the LG

Network Storage hard disks and fully activate after 3-15 seconds.

* It is recommended to utilize the stand-by function if user expects to leave the system

unattended or NAS is not being used for an extended period of time.

To set up the hibernation function, click on the Edit button.

Check Enable to select hibernation mode, or Disable to deactivate.

When selecting Enable, proceed to the next step.

Set stand-by time.

If there is no data traffic during the given time, the LG Network Storage will enter

hibernation mode. Time can be set to 10/30/60/120 minutes.

Click on the Apply button to dictate changes to the LG Network Storage. Click on

the Cancel button to discard changes.

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

UPS Power Setting

An external UPS is effective for sudden power stoppages. When connecting an external

UPS to the LG Network Storage, confirm the actions of the UPS.

Click on the Edit button to configure UPS.

Check Enable to activate UPS, or Disable to deactivate. When selecting

Enable, proceed to the next step.

* LG Network Storage supports APC Style USB UPS only.

Decide whether to shut down LG Network Storage after designated time interval or

when UPS power becomes low in case of unexpected external power cut.

* When setting it to shut down depending on remaining power of LG Network

Storage, The time interval might differ from one UPS type to another.

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

Decide whether to maintain UPS power when LG Network Storage shuts down due

to unexpected power cut.

* If another device is connected to UPS, Please do not turn off UPS but keep the

power on.

Click on the Apply button to enter changes to the LG Network Storage. Click on

the Cancel button to discard changes.

Hibernation Mode On/Off

LG Network Storage can cut off the HDD power for a designated time the user does not

make use of the program, running LG Network Storage with minimum energy. Any time

interval during the day may be set up for the max energy save mode. It should be noted

that once the max energy save mode is set to begin at a certain time, it may terminate

any work being processed.

* When the network is being used to transfer data or the BD/DVD drive is being

used, the max energy save mode will not be initiated.

For a new configuration, press the edit button.

Select apply to activate or cancel to deactivate.

To select apply, select apply in the schedule window and enter the beginning

and ending time for LG Network Storage. The set-up time must have at least 5

minutes gap from the current time. For example, if the current time was 12:00, the

max energy save mode beginning time must be set to after 12:05.

To save the current setting, press apply.

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

Once it reaches the beginning time set up, the system automatically transitions into

max energy save mode and on the LCD will appear a message, Now Working. . .

Once the system is fully in max energy save mode, the following message will

appear on the LCD. At this stage, it is no longer possible to connect the network

drive and various functions provided by LG Network Storage will be unavailable.

Max energy save mode may also be accessed through the button in the front.

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

Shutdown

Do not go directly to the LG Network Storage, as LG Network Storage can be turned on

and shut down via the web.

Restart

- Ends all current operations and restarts the LG Network Storage.

- A warning will appear when clicking the button, and the system can be restarted

by clicking on the OK button.

- During restart web access is not available.

Shutdown

- Ends all current processes and shuts down the LG Network Storage.

- A warning will appear when clicking the button, and the system can be restarted

by clicking on the OK button.

- During restart web access is not available

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

Activating the System Remotely

Once LG Network Storage has entered its max energy save mode, it can be activated

through remote internet access. The screen accessible through the internet is slightly

different from the log in screen in the normal mode, and only the administrator can use

the password to activate the system. Synchronization may take approximately a minute.

* In maximum energy save mode, log-in will only be accessible through http.

If the correct administrators password is entered, the system will be synchronized

automatically.

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

0

Language Setting

The web menu indicates a language selection capability.

Click on the Edit button to set language.

Select a desired language out of Korean, English, French, Spanish, and German

and click on the Apply button.

* The language of selection will be the default language used when the user first

accesses the web.

* If the browser has been set up to use cookies, the last language used for the

computer in its previous log-in will be the default language for the next log-in.

* Client language: Select the language that fits users client environment. (e.g.:

FTP available). For use of multiple lanuages, select unicode.

Unicode can be selected only if users program supports it.

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

1

Firmware

LG Network Storage firmware settings can be changed (Upgrade, Initialization,

Configuration and Backup/Restore).

Upgrade

LG Network Storage system and Blu-ray/DVD Driver firmware can be downloaded from

the product web site, and can be used for upgrading.

Systems with a fire wall do not allow upgrades to be installed

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

2

[System Firmware Upgrade]

Verify connection to the Internet and download system firmware for the LG

Network Storage from the product site linked below.

http://www.lge.com

Press the find button to select the system firmware downloaded from the

product site.

Press the upgrade button to Install the selected system firmware to LG

Network Storage. The upgrade progress may be viewed on the LCD in the front.

When upgrade is finished, the system will automatically reboot. The web

connection will be automatically terminated and therefore should be

reconnected.

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

[Blu-ray/DVD Drive Firmware Upgrade]

Verify connection to the Internet and download the firmware for the Blu-ray/DVD

drive attached to the LG Network Storage from the product site linked below.

http://www.lge.com

Select the Blu-ray/DVD drive firmware downloaded from the product site.

Install selected Blu-ray/DVD drive firmware.

When upgrade is finished, the version of installed Blu-ray/DVD drive firmware

will be indicated

* For stability of data, a backup of the LG Network Storage is strongly

recommended before upgrading. Installation takes between 1 to several minutes.

Advance access of other client users to the LG Network Storage while upgrading

firmware is forbidden.

Initialization

LG Network Storage initialization function. Clicking on the Initialization will Initialize the

system.

* Caution must be taken when changing the settings, for post Initialization all-user

information and data will be deleted.

* Initialization will take about 10 minutes.

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

Configuration Back-up

This allows the back-up/recovery of settings for LG Network Storage at a certain time.

Network settings (host name, IP address, workgroup), time setting (date/time, NTP),

mail notification service setting, share administration (user, group, folder security),

service setting values may be backed up but user data requires separate back-up.

[Backup]

Save the current user configuration.

* 5 backup files can be saved at maximum.

[Restore]

Select the backup file of the time point to restore.

Click on the Restore button and reconfigure the user configuration.

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

[Save Settings to PC and Restore]

During initialization of NAS, configuration files can be saved to PC for later

restoration.

[Save Configuration Files to PC ]

Choose configuration files to be saved to PC and click on the Save button to

save them to PC.

[Restore NAS User Settings Saved on PC]

NAS settings can be restored using configuration files saved on the PC.

1. Choose the Restore LG Network Storage configuration from configuration file

backed up in PC menu and select from saved configuration files using Find.

2. Select the configuration file to use for restoration and click on Restore to

change NAS settings as selected.

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

LG Network Storage Share Management

This function allows you to create users and groups as well as folders, and hence

change settings for their access authorization.

User

Current registered users appear, so new users can be created and registered user

information can be modified or deleted.

[Create User]

Click on the Create User button.

Enter user ID. User ID cannot be overlapped.

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

Enter user password.

Enter user password again for confirmation.

Enter users name.

User description can be added.

Enter user e-mail

As long as mail server settings are correct, the registration result will be sent to

he entered e-mail address. For details concerning mail server settings, refer to

.

[Edit User]

Entering editing mode by clicking on the user name in the registered user list, with the exception of the ID, all user information can be alterd.

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

Group

Current registered groups are displayed. Groups can be created and deleted, as

well as the addition or removal of users in registered groups.

[Creating a New Group]

Click on the Create New Group button.

Enter group name.

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

Enter group description.

Select user to be added to the group by clicking on the corresponding

checkbox. To remove a user from the group, deselect the user by clicking on

the the checkbox again.

When user selection is done, click on the Save button to create the group.

[Editing Groups]

By clicking on the Group Name link in the registered group list, group attributes can be altered.

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

0

Folder

Current registered folders are displayed. A folder can be created/changed/deleted for file sharing and/or authorization settings access changed to the created folder.

[Create New Folder] Click on the Add Folder button. Enter the shared folder name.

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

1

Enter folder description.

Set the volume where the folder will be created if there is more than one.

Decide whether to permit folder sharing through SMB, AFP, FTP or Webday

protocol.

- Windows: Activates folder sharing through SMB protocol on Windows/Mac/

Unix. Refer to chapter 6 for connection details .

- AFP (Mac): Activates folder sharing through AFP on Mac client.

- FTP: Activates folder sharing through FTP.

- Webday: Activates folder sharing through Webday

During network search, currently shared folders can be set up not to appear.

* If hidden, such folders will not be available for sharing through

AFP/FTP/Webday.

Create a trash box within the folder.

When deleting data while the trash box is active, all the deleted files will go to

trash box folder within the shared folder.

Set folder access restriction. If Disable is checked, users can access/use

without restriction.

Assign user/group to use the folder. Unassigned uses do not have access to the

folder.

* When a directory is activated at the Network > Workgroup/Domain menu on

the left, additional users and groups will appear.

[Folder Attributes]

By clicking on the folder name in the registered folder list, with the exception of the

folder name, all its information can be altered.

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

2

Blu-ray / DVD

The built-in Blu-ray/DVD drive allows direct copy of data from discs to LG Network Storage. Furthermore, secondary backup of data using the Blu-ray drive makes data management safer and more efficient.

Burning

Burning the LG Network Storage data to disc is possible using the Blu-ray/DVD

drive.

Burn Disc Burning LG Network Storage files to disc is possible.

[Button functions]

: Moves to upper folder.

: Refreshes the current folder.

: Files or folders selected on the left window are sent to the right window to

organize a list for recording.

: Deletes selected files or folders from the list organized for recording on the

right window.

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

Move the intended folder or file to the destined location.

Selecting a folder or file to record and move to the right side produces a

configuration data list.

Specify disc name in the Disc Name window

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

Click on the button and confirm that disc writing is possible as

indicated in the disc status box.

Pressing the button begins the burning process. The burning process

is accompanied by a progress bar display. To cancel the process, click on the

Cancel button, which appears with the progress bar.

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

At the end of the burning process, the tray ejects and the disc can be removed.

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

Service

DLNA(Digital Living Network Alliance)

DLNA, which stands for Digital Living Network Alliance, allows sharing multimedia

data such as music, video, or images saved in other devices through connecting

digital devices such PC, hard disks, or digital TVs through the home network. DLNA

comprises DMS (Digital Media Server), which sends images, music and movie data,

and DMP (Digital Media Player), which receives data. In order to fully utilize the

DLNA function, the product must be DLNA certified. This product adheres to the

Digital Media Server (DMS) function of the DLNA standard functions. In order to

fully utilize the DLNA function, the product must be DLNA certified. This product

adheres to the Digital Media Server (DMS) function of the DLNA standard functions.

[Activate/Deactivate DLNA ]

In order to activate or deactivate DLNA, the below procedures should be followed.

Follow the below instructions.

Open DLNA from the webpage.

The top section will show the current status of DLNA. To activate the Media

Server (DMS), click apply.

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

The source path refers to the location the multimedia data is currently saved.

In order to utilize the multimedia data through DLNA, locations of the saved

data must be determined. DLNA service will only be applicable to pre-set DLNA

source folders.

To activate, please press the apply button. To deactivate, please select Do

not apply and press the apply button.

[Save Multimedia data in source path]

Multimedia data in LG Network Storage may be read, written and shared through the

network.

Run Internet Explorer.

Copy the multimedia file in service\DLNA.

Note

Do not delete the selected source path (default: \service\DLNA). This may

terminate the multimedia sharing.

Use compatible multimedia file formats. Incompatible file formats may not run

properly.

Formats incompatible with the Digital Media Player, such as TV, may not run

properly even if they were compatible with LG Network Storage.

[View Multimedia Using DLNA]

Using DLNA of a PC with Microsoft Windows

Go to Control Panel > Hardware and Sound > Add a device.

Once LG Network Storage is selected, click Next and recognize device.

Run Windows Media Center or Windows Media Player.

The multimedia data saved in LG Network Storage may be viewed by selecting

LG Media Server under Library.

Note

For detailed instructions on Windows Media Player 11, refer to the Help

function of Windows Media Player 11.

Some user PC may have installed its own unique DLNA server software. For

detailed instructions, refer to the user manual of the user PC.

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

[Playing DLNA server contents on PS]

Once PS3 is turned on, the DLNA server within the network will automatically be

searched and the found server icon will appear on ( images) / (music) /

(video).

Select the DLNA server icon for log-in from ( images) /

(music) /

(video) of the home menu. All applicable folders and files supported by PS3

will be displayed.

Select the file to play.

Note

PS3 must be connected to the network. For detailed instructions on the

network set-up, refer to (Set-up) > (Network set-up) > [Internet connection

set-up].

If IP address allocation method has been altered from AutoIP to DHCP in the

current network, go to (Media server search) and re-locate DLNA server.

The DLNA server icon will only appear if (Set-up) > (Network set-up) > [Media

Server Connection] has been activated.

Displayed folder name may vary depending on the DLNA server. LG-NAS is the

default value.

Certain files may not play or may have limited access during play depending on

the users device.

Copyright protected contents shall not play.

Data file names of data saved in server not compatible to DLNA may include *.

These files may not play in PS3. Some files may play in PS3 but not play in

other devices.

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

[Manually search DLNA server in PS]

DLNA server within the same network may be manually located. This may be useful

when DLNA server does not appear automatically after PS3 has been turned on.

Select (Media server search) from (images) / (music) /

(video). Results

should appear and returning to home menu will list available DLNA server.

Note

(Media server search) will only appear if

(Set-up) (Network set-up)

[Media server search] has been activated.

[Using DLNA in Digital Image Frame]

Activate the DLNA function in LG Network Storage.

Perform a default set-up and driver set-up following the Digital Image Frame

user manual.

Search the LG Network Storage in the network using the Digital Image Frames

Explore function.

Set up to connect LG Network Storage in Digital Image Frame.

View images in Digital Image Frame.

Note

To see compatible image file format and how to access and view images, refer

to the Digital Image Frame user manual.

For information on connection between the Digital Frame and LG Network

Storage, refer to the Digital Image Frames DMA user manual.

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

0

[Using DLNA as AV Device]

Use contents by activating the DLNA function connected to the network. Set-up

procedure may vary depending on connected device. For detailed instructions,

refer to the relevant device user manual.

Network Server

Access to the LG Network Storage through FTP/FTPs or AFP is configured with this

function.

* For router use, the router settings need to be changed. Please refer to port

forwarding of DMZ settings in the routers manual.

FTP

An FTP offers a handy environment when accessing LG Network Storage on the Internet.

The use of FTP service can be established through Enable. The Windows image is explained here. The method below is applicable to other OSs.

Use the FTP connection program, or open explorer and input the address ftp://

[address]:[port number]. If the IP address is unknown, refer to

Program Usage> or . Port number

may be changed to a number determined by the user. The default FTP port number

is 21. To use the default value (21), user may log on without inputting the port

number.

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

1

* Using the DDNS service offered by LG Network Storage will log on to ftp://

myname.lgnas.com:port number. For more details, please refer to system remote

control .

* To use the default port value 21, user may log on without inputting the port

number through ftp://IP address or ftp://myname.lgnas.com.

Input the user name and password and login

Look at the sharing folder. Folders and files can be managed via drag and drop, allowing for name change and delete. Depending on the local network environment, use of the firewall in the FTP server may be prohibited. For FTP server problems, consult the routers manual or contact the network administrator.

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

2

* LG Network Storage supports FTPS with advanced security on the existing FTP for

better protection of the users data traveling through the internet. To use FTPS, an

FTP connection program that supports FTPS must be used. The explorer program

supported by the Windows operating system does not support FTPS. Generally

most commercial FTP connection programs support FTPS and more details may

be found in the relevant program manual. (A typical free FTP connection program

such as File Zila does not allow access to LG Network Storage through FTPS.)

AFP

The AFP offers a similar environment to Windows folder sharing.

* AFP is available within networks with the installed LG Network Storage, but not

for external access without network setting changes due to firewall and other

restrictions.

* If there are no special reasons Windows Sharing is recommended, as the Mac OS

X basically supports Windows Folder Sharing.

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

Network Printer

The network printer can be used by connecting the USB printer to the LG Network

Storage.

Select Service > Network Printer from the administrators web menu.

Check Enable, click the Apply button.

[Windows users]

In the web menu go to Enable to connect the network printer, after which an

LG Network Storage printer icon appears.

Doubling clicking on the icon shows the progress of the printer driver

installation. For installation issues refer to the printer manual.

If installation is unsuccessful use the network printer service.

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

[Mac users]

Click on Go/ Utilities in the tool menu.

Click on the Printer Setup Utility.

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

Click on Add.

Hold the alt key down while clicking on More Printers.

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

In the pop up window:

i. Select Advanced.

ii. Select Windows Printer via SAMBA.

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

iii. Input the printer URI. The form name is smb: /LG Network Storage IP/printer.

The printer name can be found in the Device Configuration(device config)/ USB

Printer page.

iv. In Printer Model, select Generic.

v. Click Add.

* By pressing the alt key while clicking on More Printers, a range of printers can

be seen. There are no other options.

vi. The printer appears in the printer list. Now the printer is ready for use.

* Linux users must consult the OS manual, or inquire at the printer company.

iTunes

Using the iTunes services and recreating music files stored to the LG Network

Storage through PC/Mac iTunes programs is possible. Music does not affect the

PC/Mac storage space as transfer is done through streaming.

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

For required use, select Enable for iTunes Streaming Service.

Set Music Library Update Frequency.

- Forced update (manual): Activate once the music file service for Streaming

to begin the service. To create a music file, time is needed hence manual

updates are recommended.

- Every 5 minutes (auto): Every 5 minutes, the music file list is updated

periodically. For updated music lists, the client program must be restarted.

* Itemizing a music file list may be time consuming, the Foced update option is

recommended unless music files are updated frequently.

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

Time Machine

The Time Machine service is the automatic back-up function built in Mac OS X

and allows the Mac data copies to be stored in LG Network Storage in their latest

version.

This service is available in only Mac OS X version 10.5 Leopard or later versions.

[Web Set-up]

Enter the host name.

The host name is the local host name after deleting .local found under System

Environment Set-up Shared Edit.

4. LG Network Storage Web Menu Use (for LG Network Storage administrators)

100

EntertheMACaddress.

TheMacaddresscanbefoundbygoingtoApplicationPrograms

UtilitiesTerminalandrunningtheifconfigcommand.Enterthe

etheraddressunderen0.

Selectenableandpressapply.

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

101

[Mac OS]

Go to Move Connect to Server and enter afp://LG Network Storage IP

address under Server Address, then click Connect.

* The AFP function must already be activated under network server settings.

If the log-in window appears, enter the name and password and click

Connect. Enter admin for name and the administrators password for

password.

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

102

When the mount volume window opens, select Timemachine and press the

OK button.

Go to Settings Time Machine, press Change disk, select LG Network

Storage Timemachine and press Enable as back-up.

When the log-in window appears again, repeat instruction (2) and the Time

Machine will be On and back-up begins in LG Network Storage.

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

10

iSCSI

This allows for the user to use the LG Network Storage Blue-ray/DVD drive as a

CD drive. The LG Network Storage iSCSI service allows multiple users log-in and

usage.

[iSCSI Initiator Installation]

In order to use the iSCSI, the Initiator program must be installed in the computer

A. Initiator Installation on a Windows PC

For Windows XP, download the installation program from the below Microsoft

website

Website

http://www.microsoft.com/downloads/details.

aspx?familyid=12cb3c1a-15d6-4585-b385-befd1319f825&displaylang=en

For Windows Vista, the operating system already includes a program and no

additional installation is required.

B. Initiator Installation on a Linux PC

For Linux, the Initiator may be installed automatically from the website.

For ubuntu Linux, enter

$ sudo apt-get install open-iscsi

and for fedora, enter

$ yum install open-iscsi

to automatically install the Initiator.

Website

http://www.open-iscsi.org/

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

10

C. Initiator Installation on a Mac

Install the globalsan iSCSI initiator. This can be downloaded from the studio

network solutions homepage.

Website

http://www.studionetworksolutions.com

[Server Synchronization]

On the webpage, click Enable and then click Apply. Once the iSCSI is

activated, certain functions such as web burning will be limited.

[iSCSI Connection]

A. Connection on a Windows PC

Activate the iSCSI initiator.

For Windows Vista, go to Control panel iSCSI Initiator and activate the

Initiator. For Windows XP, go to the Start menu and select iSCSI Initiator from

the program list.

If a mandatory certification (CHAP) procedure has been set up in the web

setting, enter the required information under the General tab by pressing the

Secret button.

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

10

Find the iSCSI target (LG-NAS).

Click on the Discover tap on the top of the iSCSI Initiator program. Then click the

Add button on the bottom. Then a new window to Add Target Portal (picture

below) should appear. Enter the target (LG Network Storage) IP address.

If a mandatory certification (CHAP) procedure has been set up in the web

setting, enter the required information by pressing the Advanced button in

the above window.

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

10

Log in.

Go to the Targets tab on the cop of the iSCSI Initiator program. If all of the

above procedures have been followed properly, the iSCSI Initiator will find

and list the information for the target (LG-NAS). Select the relevant target

name and press the Log On . . . and click OK from the pop-up window.

Check that the target has been connected as follows.

Target can be checked by going to Device administrator DVD/CD-ROM

drive.

NAS built-in ODD can be accessed by using tools such as CyberLink

Power2Go.

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

10

Log out when done.

Go to the Targets tab on the top of the iSCSI Initiator program. Then click on

the Details button on the bottom.

Select the relevant Target Name and click Log Off. . .

Due to compatibility issues between iSCSI Initiator and Windows Vista, the

Windows Vista built-in ODD record functions, mastered or live file system,

may not be available.

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

10

B. Connection on a Linux PC

Activate the iSCSI initiator.

$ /etc/init.d/open-iscsi start

Find the iSCSI target. If the LG NAS (target)s IP address is 192.168.10.2, the

target is:

$ iscsiadm -m discovery -t sendtargets -p 192.168.10.2

Once target is found, execute the above command, which will display the

target name. The following is an example:

$ 192.168.10.2:3260,1 iqn.2009-01.com.lge:LG-NAS.123456

Log in. Log-in command for the above target name is:

$ iscsiadm --mode node --targetname iqn.2009-01.com.lge:

LG-NAS.123456 --portal 192.168.10.2:3260 --login

Confirm the target connection using the below command.

$ cdrecord -scanbus

ODD tools such as cdrecord can be used to utilize the NAS built-in ODD.

Website

http://cdrecord.berlios.de/private/cdrecord.html

Log out when done. Use the following command:

$ iscsiadm --mode node --targetname iqn.2009-01.com.lge:

LG-NAS.123456 --portal 192.168.10.2:3260 --logout

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

10

[Connection for CHAP certification]

Open the open-iscsi set-up file /etc/iscsi/iscsid.confand set up the CHAP

certification. Follow the below instructions. (The CHAP certificate password

must match the password set up for the iSCSI service on the LG Network

Storage webpage.)

discovery.sendtargets.auth.authmethod = CHAP

discovery.sendtargets.auth.username = inAdmin

discovery.sendtargets.auth.password = password set up (Target Secret)

node.session.auth.authmethod = CHAP

node.session.auth.username = outAdmin

node.session.auth.password = password set up (Initiator Secret)

Activate open-iscsi.

$ /etc/init.d/open-iscsi start

If the open-iscsi was already activated, restart.

$ /etc/init.d/open-iscsi restart

The rest of the procedures are the same as for [Connection to a Linux PC].

Websites

http://www.cyberciti.

biz/faq/howto-setup-debian-ubuntu-linux-iscsi-initiator/print/

http://manpages.ubuntu.com/manpages/hardy/man8/iscsiadm.8.html

http://wiki.debian.org/iSCSI/open-iscsi

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

110

C. Connection on a Mac

Activate iSCSI initiator.

Go to System Preferences -> globalSAN iSCSI

Find the iSCSI target. If the IP address is 192.168.10.2, see below.

Go to globalSAN iSCSI -> Portals and press + and enter 192.168.10.2 and

press OK.

If a mandatory certification (CHAP) procedure has been set up in the web

setting, enter the required information by pressing the Advanced button in

the above window.

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

111

Log in.

Go to globalSAN iSCSI -> Targets, select the relevant target name and click

Log On. . . . and then Connect on the pop-up window.

Confirm that the target is connected as follows.

Go to Utilities -> System Profiler and check that iSCSI appears under Disc

Burning interconnect.

Tools such as Disc Utility/Finder can be used to utilize the NAS built-in ODD.

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

112

Log out when done.

Go to globalSAN iSCSI -> Targets, select the relevant target name and click

Log Off. . . . and then Disconnect on the pop-up window.

* Notes

Because the LG Network Storage Blue-ray drive network connection allows

any logged-in user to use the program, it is important that other users are not

interrupted. For example, in the case that other users are burning data using the

Blue-ray drive, it is recommended to avoid commands that may interfere with the

work, such as open tray.

In addition, if data writing/reading on the LG Network Storage is in progress

through the network drive connection, there may be substantial data transfers

within the network and cause difficulty in data transfers through the iSCSI, resulting

in slower and limited writing/reading speed per disk.

Website

http://www.studionetworksolutions.com

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

11

Torrent

A P2P file sharing program that allows simultaneous download of files from multiple

locations, Torrent does not have its own search engine, so user must obtain a file in

format .torrent, register to the torrent program and download the file.

To use the Torrent function, user must Enable the Torrent from the service menu.

Click on the Torrent icon on the top and open the Torrent program administration

window.

[Download]

Click on the Open icon.

On the pop-up window:

i. Click the Find button and select the .torrent file previously downloaded.

ii. Or enter the path to the .torrent file in or enter a URL.

Once completely downloaded, the file can be found in the network folder [Refer

to How to Use the LG Network Storage Network Folder] under \service\Torrent.

[Use]

Open: Register the file to download (.torrent).

Remove: Removes the selected file from the list. This does not delete the file

itself.

Remove Data: Removes the selected file from the list. This deletes the file.

Pause: Temporarily stops the downloading process of the selected file.

Resume: Resumes the downloading process of the selected file temporarily

stopped.

Pause all: Temporarily stops the downloading process of all files.

Resume all: Resumes the downloading process of the all files temporarily

stopped.

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

11

Filter: Hides or unhides the filter item.

Inspector: Hides or unhides the information for the selected file.

[Set-up]

Click on the set-up icon.

Select Preferences and set up the port to be used, transfer speed limit, etc.

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

11

USB Sync

This function enables data transfer between USB devices, memory cards or

external e-SATA devices and the LG Network Storage.

*Note: Some particular devices may require an adapter. (For a compatible

memory card list, please refer to the homepage, http://www.lge.com. Use of an

incompatible device may cause malfunction of the LG Network Storage.)

USB Device & Memory Card

USB device and memory card data can be backed up with the LG Network Storage.

A separate process can be created for each USB device. One task can be

performed using the USB device ID, target folder and back up method information,

as well as back up period information.

[Current USB List]

USB device and memory card lists on the LG Network Storage are displayed.

Connect a USB or memory device to the LG Network Storage.

* On the back panel of the LG Network Storage there are 2 USB ports, on the

front panel of the LG Network Storage there is 1 USB port and 1 memory slot.

Refresh the list to itemize.

Depending on which ports they are plugged in, USB1, USB2, USB3 and

MemCard will appear.

Select the device for backup and click on the Create button.

Specific options for Backup are listed.

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

11

The task name is saved. (automatically generated)

The task information description is specified.

The selected devices unique ID is displayed. ID specific to the manufacturer

information, product information, etc, are displayed.

The port with the device is displayed.

Each time the USB is plugged the USB is automatically recognized and back-up

begins according to the settings. There is no need to press any button as a One

Touch back-up. In the case that USB automatic synchronization is not selected,

once the USB is recognized in the system, a message asking whether to back-

up the USB will pop up on the LCD and back-up begin at the press of the Set

button using the settings information from the Web. (One Touch back-up)

The backup method is specified.

- Incremental: Backs up only additional information to the data previously

backed up

- Full: Backs up the entire source files.

Folders are created by back-up date. For more information, refer to [Incremental

Back-up and Full Back-up] on the back.

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

11

The current task list is indicated and tasks may be created, edited, deleted or

synched.

Clicking on the Create button allows for a new task to be created.

If the task name is selected, and the Delete button is clicked, the task is

deleted.

If the list task name is clicked, editing is possible.

For back-ups of removable storage devices, LG Network Storage supports

Incremental back-up and Full back-up. Back-up data are saved in a folder

designated by the user and in the Last Backup folder.

- Incremental: The Last Backup folder contains all data from the removable

storage device. The user designated folder only contains additional data in

the removable disk when compared to the Last Backup folder. .

- Full: Backs up the entire source files. Unlike the Incremental back-up, Full

back-up saves all files in the user designated folder. (Last Backup folder is

not used.)

The following is an example of Incremental back-up and Full back-up. For the 1st

back-up (Jan 1, 2009) the USB contained the following files:

a.txt

b.txt

c.txt

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

11

The Incremental back-up will create a folder for the back-up date with the above

files. It also creates a Last Backup folder containing all of the files in the USB. The

system folder structure is as follows:

`-- USB_LG_XTICK

|-- 20090101

| |-- a.txt

| |-- b.txt

| `-- c.txt

`-- lastbackup

|-- a.txt

|-- b.txt

`-- c.txt

For the 2nd back-up (Jan 2, 2009), a.txt and b.txt had been deleted and d.txt and

e.txt had been added.

c.txt

d.txt

e.txt

The 2nd back-up will also create a folder for the back-up date containing only the

added or modified files. In this case, only d.txt and e.txt will be saved and the Last

Backup file will contain all files in the current USB.

`-- USB_LG_XTICK

|-- 20090101

| |-- a.txt

| |-- b.txt

| `-- c.txt

|-- 20090102

| |-- d.txt

| `-- e.txt

`-- lastbackup

|-- c.txt

|-- d.txt

`-- e.txt

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

11

For the 3rd back0up (Jan 3, 2009), e.txt has been opened, modified and saved.

Only e.txt file will be saved in the new folder. In the Last Backup folder, all files in

the current USB, c.txt, d.txt and e.txt, will be saved as is.

`-- USB_LG_XTICK

|-- 20090101

| |-- a.txt

| |-- b.txt

| `-- c.txt

|-- 20090102

| |-- d.txt

| `-- e.txt

|-- 20090103

| `-- e.txt

`-- lastbackup

|-- c.txt

|-- d.txt

`-- e.txt

If Full back-up had been selected for all 3 back-ups above, then the folder

structure after the 3 back-ups will be as follows:

`-- USB_LG_XTICK

|-- 20090101

| |-- a.txt

| |-- b.txt

| `-- c.txt

|-- 20090102

| |-- c.txt

| |-- d.txt

| `-- e.txt

`-- 20090103

|-- c.txt

|-- d.txt

`-- e.txt

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

120

Information

This shows network, volume, device status of the LG Network Storage and information about system log, connection log and self-diagnosis.

Status

Status of the LG Network Storage Network, Volume and external devices can be viewed. For more specific details or to make changes, clicking on the icons on the

bottom will direct the users to the relevant webpage.

Mac Address, IP, Subnet Mask, Gateway, DNS Server, Ethernet Frame Size, link

Speed, etc information can be viewed.

Configured volume list and usage/RAID state information etc can be viewed.

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

121

All hard disk information connected to the LG Network Storage can be viewed

by Bay position

The information pertaining to the Blu-ray drive connected to the LG Network

Storage can be viewed.

The information pertaining to the USB device and memory card connected to the

LG Network Storage can be viewed.

The information pertaining to the e-SATA device connected to the LG Network

Storage canbe viewed.

User state currently connected to the LG Network Storage can be viewed.

(SMB , FTP)

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

122

Log

The LG Network Storage service history can be displayed/saved.

The system use history can be viewed.

The share folder use history can be viewed.

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

12

The FTP use history can be viewed.

The diagnosis is und and the result can be viewed

- The service code for proper functions is displayed as [SVC_ CODE: 00_00].

Selected tab log can be downloaded to the client PC.

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

12

Top menu

WebDAV

LG Network Storage supports the WebDAV function which allows to remotely drag

and drop, open and save functions after logging on to LG Network Storage from the

web. (MS Office file only)

* The WebDAV function will allow the user logged in through the webpage to access

files in the LG Network Storage as if they were files in the users PC.

The PC must have Microsofts MS Office installed in order for the WebDAV to be

available.

To use WebDAV, user folder must be generated and WebDAV must be selected

from the support protocol.

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

12

Select the WebDAV icon on the top.

Go through user certification. This is the same as the user certification required

for network folder access.

Once certified, the following screen will pop up and file drag and drop, open,

edit and save functions will be made possible.

* This information is for Windows XP users only. Other OS users should refer to the

information found online.

. LG Network Storage Web Menu Use (for LG Network Storage administrators)

12

My Information

Click the My information button on the left top corner. This displays the user

information.

Click on the Edit button on the right bottom corner.

Enter the modified information, enter the existing password in User password

and click on OK.

* To change the password, enter the existing password in User password and

enter the new password in New password and Confirm new password.

. LG Network Storage web menu usage (Regular users)

12

. LG Network Storage web menu usage (Regular users)

Blu-ray / DVD

The built-in Blu-ray/DVD drive allows direct copy of data from discs to LG Network Storage. Furthermore, secondary backup of data using the Blu-ray drive makes data management safer and more efficient.

Burning

Burning the LG Network Storage data to disc is possible using the Blu-ray/DVD

drive.

Burn Disc Burning LG Network Storage files to disc is possible.

[Button functions]

: Moves to upper folder.

: Refreshes the current folder.

: Files or folders selected on the left window are sent to the right window to

organize a list for recording.

: Deletes selected files or folders from the list organized for recording on the

right window.

. LG Network Storage web menu usage (Regular users)

12

Move the intended folder or file to the destined location.

Selecting a folder or file to record and move to the right side produces a

configuration data list.

Specify disc name in the Disc Name window

. LG Network Storage web menu usage (Regular users)

12

Click on the button and confirm that disc writing is possible as

indicated in the disc status box.

Pressing the button begins the burning process. The burning process

is accompanied by a progress bar display. To cancel the process, click on the

Cancel button, which appears with the progress bar.

. LG Network Storage web menu usage (Regular users)

10

At the end of the burning process, the tray ejects and the disc can be removed.

. LG Network Storage web menu usage (Regular users)

11

Top menu

My Information

Click the My information button on the left top corner. This displays the user

information.

Click on the Edit button on the right bottom corner.

Enter the modified information, enter the existing password in User password

and click on OK.

* To change the password, enter the existing password in User password and

enter the new password in New password and Confirm new password.

. LG Network Storage via network drive

12

. LG Network Storage via network drive The file sharing service is the most important function in LG Network Storage.

This section pertains to Windows, Mac, Linux OS, which are explained in reference to

their use with the LG Network Storage network drive.

Accessing the LG Network Storage data in Windows OS

For Windows users, observe the following procedure to access the LG Network Storage.

PC Application Program Usage After setting up the LG Network Storage PC Software Installer disc NAS Detector

program and desktop icon use, execute and clicking on the Open Network Folder

button will allow access to LG Network Storages sharing folder. For detailed setting

information refer to .

. LG Network Storage via network drive

1

Windows OS Execute function use Clicking on Execute in the Windows OS can start a new menu with inputting the \\IP

Address to the LG Network Storage can be accessed. If IP address is unknown, refer to

or .

Windows File Sharing Use Open the web browser and input \\IP address in the address bar. The server can

be accessed after the log in. If the IP address is unknown, refer to

Program> or .

. LG Network Storage via network drive

1

Tip) Post server connection, network drive set-up If there is a connection to the LG Network Storage, all sharing folders are registered. If

settings involve the network drive using the

Tools > Map Network Drive, future connection to the LG Network Storage server

becomes more convenient.

. LG Network Storage via network drive

1

* Multiple folders can be set up in different network drives in the same way.

. LG Network Storage via network drive

1

MAC OS connection

MAC users can connect to the LG Network Storage by methods such as explained

below.

[Server connect function use] The LG Network Storage sharing folder can be added to the Mac server list on the desk

top. The connection order is as follows.

Select Connect to server after clicking on Go at menu bar.

At the server address field, input the LG Network Storage IP address smb://LG

Network Storage IP Address, and click the Connect button. If the LG Network

Storage IP address is not known, refer to or

Network Storage Information Confirmation>.

. LG Network Storage via network drive

1

Input the log in ID and password and click on the OK button. The initial settings

are as follows: ID: admin, password: admin. For future security, it is recommended

that password is changed after logging on to the web administrator page.

. LG Network Storage via network drive

1

Select the volume to be used (e.g. cdrom/service/volume1) in the LG Network

Storage folder list and click OK.

The relevant shared folder will open and the contents displayed.

6. LG Network Storage via network drive

139

Linux OS access

LG Network Storage supports Windows, MAC, and Linux OS, through the SMB service.

The Linux system connection is as follows. Ubuntu will be used as a reference.

Click on the menu bar and then select network.

Click on Windows Network and select workgroup to display the LG Network

Storage connected. Select the name of the LG Network Storage to connect to.

. LG Network Storage via network drive

10

Selecting LG Network Storage will display the folder list of LG Network Storage.

Select the volume to be used (e.g. cdrom/service/volume1).

If the ID and passwords are inputted then connection to the LG Network Storage

is allowed. Initial default information is ID: admin, password: admin. For future

security, it is recommended that password is changed after logging on to the web

administrator page.

. LG Network Storage via network drive

11

After logging in, the LG Network Storage share folder appears.

. LG Network Storage Maintenance

12

. LG Network Storage Maintenance

This section explains about general LG Network Storage maintenance and self-

diagnosis.

LG Network Storage shut down/restart

The following steps pertain to server shut down/restart.

Inform all connected users to save files in operation and stop use of the LG Network

Storage.

Open the administrator web page, and go to the System > Power > Shutdown tab.

Follow the description and press the Restart button to restart or the Shut down

button to shut down.

For a compulsory shut down of LG Network Storage, press the power button for more

than 3 seconds. A message saying that system will shut down will pop up and LG

Network Storage will shut down.

. LG Network Storage Maintenance

1

Administrator password and network set up initialization

Open the administration web menu and go to the Initialization tab of the System >

Firmware menu. Following the explanation, push the Initialization button and initialize

the default system values.

Warning: As this time all registered user information and data will be deleted, and

cannot be recovered.

LG Network Storage default value initialized items

System administrator ID, password: admin, admin

Network set up /TCP/IP configuration: DHCP mode will be set up as default

mode

Network set up/TCP/IP configuration : Jumbo frame inactivity

System device/IP filter: All connections are allowed

RAID components

Service set-up value

User/folder/group list

Log in to the LG Network Storage using the default user name and password:

ID: admin, password: admin

. LG Network Storage Maintenance

1

System information checking and saving

Open the administration web menu and go to the Log of the Information menu then

check and save settings in System Log, Samba Log and FTP Log.

Self-diagnosis execution

The LG Network Storage, by virtue of built in self-diagnosis mode, helps users easily

recognize and handle problems arising on the server.

* The volume must first be constructed before running self-diagnosis.

Open the administrators web menu and go to Information Log menu and

select Self-diagnosis tab to immediately execute the LG Network Storage

self-diagnosis.

Even in the middle of usage, the administrator can open up the administrator web

menu and select the Self-diagnosis tab in the Information > Log menu, so the

LG Network Storage immediately runs self-diagnosis.

. LG Network Storage Maintenance

1

System failure or malfunction

If the LG Network Storage does not display SVC_CODE[00_00] which verifies normal

status and seems to have encountered a problem after running a Self-diagnosis on

the administrator web as stated above in section 7.4, follow the steps below.

For technicians reference, write down the error code appearing on the LCD

[SVC_CODE xx_yy] and make a record on tasks done before the accident and

messages you witnessed.

For error messages mentioned in , you can get help from LG electronics

Service Site if such errors were caused by negligence. http://www.lge.com.

When no solution exists, do not disassemble and call the service center for

remote technical support.

Power cut or failure

When power failure occurs, the LG Network Storage will return to its former pre

power-failure state after reboot. In case of system malfunctions under normal

environment, observe the following procedure.

If the system settings are modified, the user must perform a new set up after

reboot.

If the system is still acting strangely contact the service centre.

To prevent data loss, frequently back up files.

Follow the above description for shutdown/restart.

In the case that a potential shut down is expected, all files must be saved and

backed up. After the power is restored, reboot the system.

System temperature protection

If HDD temperature within the system exceeds 67 degrees Centigrade or 153 degrees

Fahrenheit, the system ends automatically and to protect hardware.

. RAID trouble shooting

1

. RAID trouble shooting The LG Network Storage RAID configuration is abnormal when error messages appear,

hence resort to another solution:

Note: To avoid data obstacles, first perform a back-up of all important data from the LG

Network Storage.

1. RAID configuration error checkup

Confirm whether there is an error on the RAID configuration:

On the Status Information/Volume page, the volume configuration state will

show as degraded/destroyed.

Confirm which HDD is causing the RAID error.

LED: The LG Network Storage state LED will appear as red.

Hard disk with error will not appear in the hard disk status window.

. RAID trouble shooting

1

2. Problem solutions

Removing the HDD with the error and connecting a new hard drive (e.g. HDD 2)

will display the new hard disk status to be inactive on the system/volume/add or

remove HDD page. Select the hard disk and click the Add button and RAID will

reconfigure. This will delete all contents of the new hard disk.

RAID reconstruction entails to RAID 1 only.

If there is another failure during reconfiguration, another hard disk should be connected

in place of the hard disk at work and reconfigure RAID.

When connecting or disconnecting the HDD, strictly adhere to the following procedure

and avoids abnormal system operation or data obstruction.

1. In the LG Network Storage, one HDD can be connected or disconnected at a time.

2. 10 seconds will lapse before 2 tones are heard when the LG Network Storage is

connected to or disconnected from a new hard drive. Next, connect or disconnect

the HDD.

. RAID trouble shooting

1

Appendix A Volume Construction & RAID Configuration

This section describes volume configuration and supported RAID level. When

configuring volume using RAID, the use of Disks of the same manufacturer and capacity

is recommended to maximize stability and efficiency of configuration. In the case that

the Disks differ in capacity and trademark, data may be lost due to low system stability

and efficiency. In the case that the volume of the damaged Disk must be amended,

relevant data must first be backed up.

Single Disk (None) volumes

The volume can be configured to each Disk without configuring the RAID. This issimilar to methods with general PCs that use Disks.

If the Disk is damaged, the damaged Disk data may be lost.

1

2

A A

B B

. RAID trouble shooting

1

Mirroring volumes

Data can be exactly replicated to the Disk through this technique. If one Disk becomes damaged in the volume, data can be efficiently transferred, saved and backed up to another configured Disk. The volumes storage capacity is equal to that of the smallest Disk in the RAID1, as the data is reproduced from Disk to Disk. The data backup is a priority during RAID1.

The saving of important data is recommended.

1

2

A A

B B

C C

A B C

. RAID trouble shooting

10

RAID0 striping volume

The Disks are configured in parallel so that they are all being used at once to store data, as if they were one Disk in summation. Because the data is saved to each Disk in parallel, many files of low capacity are read simultaneously but with superior efficiency. Many low capacity files are read because multiple blocks of data are stored to each Disk, though the performance is excellent at this time. In order to secure data stored, Information is not read when at least one Disk is damaged. Subsequently, if the Disk is damaged, the saved data in the volume will be lost. The storage capacity of the volume as a whole is the sum of the capacities of all of the Disks.

This technique must not be used for the saving of important data, but rather for fast data access and for maintenance of the security of its volume capacity.

D E F 1

2

A B C A

B

C

D

E

F

. RAID trouble shooting

11

JBOD Linear volume

The Disks are configured in series so that they are all being used at once to store data, as if they were one Disk in summation. The volumes storage capacity can be maximized, as the data is stored to the Disks in sequence. Data must not be written in the event of a damaged Disk to safeguard saving capacity. In this way, if a Disk is damaged, saved date in the volume will be lost. The storage capacity of the volume as a whole is the sum of the capacities of all of the Disks. To maximize the safeguard of capacity of the volume, saving of important data is not recommended.

D E 1

2

A B C A B C

D E

. RAID trouble shooting

12

Appendix B Technical Support

LG Network Storage provides dedicated online support and customer service via instant

messenger.

You can contact us by the following means:

-. Online Support : http://www.lgservice.com

LG Electronics U.S.A. Inc, 1000 Sylvan Ave.

Englewood Cliffs NJ 07632 U.S.A or http://www.lgusa.com

LG Electronics Deutschland GMBH Jakob-Kaiser-Strae 12,

D-47877 Willich, Germany

Goldstar France E.U.R.L Paris Nord II 22, Avenue des Nations-B.P.50372

VILLEPINTE 95945 ROISSY CDG CEDEX France

LG Electronics Espaa Complejo Europa Empressaries (Edif. Bruselas)

Ctra, N-VI 28230 Las Rozas Madrid Spain

. RAID trouble shooting

1

Appendix C Open source software notice

The following GPL executables and LGPL libraries used in this product are subject to

the GPL/LGPL License Agreements:

GPLv2.0 :

apcupsd

apt

base-files

base-passwd

bash

bootchart

busybox

bzip2

ca-certificates

cdrtools

dbus

debian-archive-keyring

debianutils

dpkg

dvd+rw-tools

e2fsprogs

file-rc

gcc

gpm

grep

hostname

ifplugd

ifupdown

inadyn

inotify-tools

jQuery

krb5

libcap

libgdbm

libid3tag

Linux Kernel

. RAID trouble shooting

1

lockfile-progs

logrotate

lprng

lsb

lzo

module-init-tools

mtd

mt-daapd

netatalk

netbase

net-tools

noflushd

ntfs-3g

pam

perl

proftpd

psmisc

readline

scst-iscsi

sed

sg3-utils

shadow

smbwebclient

ssmtp

sysklogd

time

transmission

u-boot

udev

util-linux

. RAID trouble shooting

1

GPLv.0 :

binutils

gnupg

parted

rsync

samba

wget

LGPLv2.1 :

acl

Ajaxplorer

attr

avahi

codepress

confuse

debmapper

dialog

glib2.0

glibc

gmp

gnutls8

keyutils

libdaemon

libexif

libgcrypt

libgpg-error

libiconv

libidn

liblockfile

libscew

libtasn1

libusb

lzma

mpfr

packer

ufo

. RAID trouble shooting

1

LG Electronics offers to provide source code to you on CD-ROM for a charge covering

the cost of performing such distribution, such as the cost of media, shipping and

handling upon e-mail request to LG Electronics at:

opensource@lge.com

This offer is valid for a period of three (3) years from the date of the distribution of this

product by LG Electronics.

You can obtain a copy of the GPLv2.0, GPLv3.0, LGPLv2.1 licenses from

http://www.gnu.org/licenses/old-licenses/gpl-2.0.html,

http://www.gnu.org/licenses/gpl-3.0.html

http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.

Also you can obtain the translation of GPLv2.0, GPLv3.0, LGPLv2.1 licenses from

http://www.gnu.org/licenses/old-licenses/gpl-2.0-translations.html, http://www.gnu.

org/licenses/translations.html,

http://www.gnu.org/licenses/old-licenses/lgpl-2.1-translations.html.

This product includes

Berkeley DB under Berkeley DB license (http://www.oracle.com/technology/

software/products/berkeley-db/htdocs/oslicense. html ) Copyright 1990-2008

Oracle Corporation.

Copyright 1990, 1993, 1994, 1995 The Regents of the University of California

Copyright 1995, 1996 The President and Fellows of Harvard University.

openLDAP under openLDAP Public License (http://www.OpenLDAP.org/license.

html.)

Copyright 1998-2007 The OpenLDAP Foundation

WebFX under Apache License 2.0(http://www.apache.org/licenses/)

Apache HTTP Server under Apache License 2.0

Copyright 2006 The Apache Software Foundation.

This product includes software developed at The Apache Software Foundation (http://

www.apache.org/).

Portions of this software were developed at the National Center for Supercomputing

Applications (NCSA) at the University of Illinois at Urbana-Champaign.

This software contains code derived from the RSA Data Security Inc. MD5 Message-

Digest Algorithm, including various modifications by Spyglass Inc., Carnegie Mellon

University, and Bell Communications Research, Inc (Bellcore)

This work includes the Expat xml parsing library Copyright (c) 1998, 1999 James Clark,

distributed under and subject to the Mozilla Public License Version 1.1.

This work includes the regex library Copyright 1992, 1993, 1994 Henry Spencer, all

rights reserved.

. RAID trouble shooting

1

This product includes other open source software.

bind9 :

Copyright 2004-2008 Internet Systems Consortium, Inc. (ISC)

Copyright 1996-2003 Internet Software Consortium.

Copyright 1996-2001 Nominum, Inc.

cyrus-sasl2: Copyright 1998-2003 Carnegie Mellon University

debconf: Copyright 1999-2006 Joey Hess .

dhcp3: Copyright Internet Systems Consortium (ISC)

dibi : Copyright 2005, 2008 David Grudl (http://davidgrudl.com)

file:

Copyright 1985-1995 Ian F. Darwin

Copyright 1994-2008 Christos Zoulas christos@zoulas.com

Javascript MD5 : Copyright 1998 - 2009, Paul Johnston & Contributors

Libcurl: Copyright (c) 1996 - 2008, Daniel Stenberg, daniel@haxx.se

Libpcap: Copyright 1993-2008 The Regents of the University of California.

Libssh :

Copyright (c) 2004-2007 Sara Golemon

Copyright (C) 2006-2007 The Written Word, Inc.

Libxml:

Copyright 1998-2002 Daniel Veillard.

Copyright 1998-200 Bjorn Reese and Daniel Stenberg.

Copyright 2000 Gary Pennington and Daniel Veillard.

Lighttpd: copyright 2004, Jan Kneschke, incremental

Ncurses: Copyright 1998 Free Software Foundation, Inc.

ntp: Copyright David L. Mills 1992-2006

pcre:

Copyright 1997-2007 University of Cambridge

Copyright 2007, Google Inc.

PHP5 software, freely available from http://www.php.net/software/.

Copyright 1999 - 2009 The PHP Group.

popt: Copyright 1998 Red Hat Software

portmap:

Copyright 1983,1991 The Regents of the University of California

Copyright Sun Microsystem.

. RAID trouble shooting

1

Prototype JavaScript framework: Copyright 2005-2008 Sam Stephenson

Scriptaculous : Copyright 2005-2008 Thomas Fuchs (http://script.aculo.us,

http://mir.aculo.us)

sudo:

Copyright 1994-1996,1998-2005,2007 Todd C. Miller

Copyright 1987, 1989, 1990, 1991, 1993, 1994 The Regents of the University of

California

tcp-wrappers: Copyright 1995 by Wietse Venema

Expat: copyright 2006 expat maintainers.

OpenSSL: software developed by the OpenSSL Project for use in the OpenSSL

Toolkit. (http://www.openssl.org/)

cryptographic software written by Eric Young (eay@cryptsoft.com).

software written by Tim Hudson (tjh@cryptsoft.com).

software developed by the OpenSSL Project for use in the OpenSSL Toolkit.

(http://www.openssl.org)

Zlib: Copyright 1995-2002 Jean-loup Gailly and Mark Adler.

All rights reserved.

Permission is hereby granted, free of charge, to any person obtaining a copy of this

software and associated documentation files (the Software), to deal in the Software

without restriction, including without limitation the rights to use, copy, modify, merge,

publish, distribute, sublicense, and/or sell copies of the Software, and to permit

persons to whom the Software is furnished to do so, subject to the following conditions:

THE SOFTWARE IS PROVIDED AS IS, WITHOUT WARRANTY OF ANY KIND,

EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF

MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.

IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY

CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,

TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE

SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

. RAID trouble shooting

1

Appendix D Compatible/Recommended Device List

For the latest compatible/recommended device list, please visit http://www.lge.com.

Recom

Manualsnet FAQs

If you want to find out how the N2B1 LG works, you can view and download the LG N2B1 N2R1DD2.AUAR01I Storage User Guide on the Manualsnet website.

Yes, we have the User Guide for LG N2B1 as well as other LG manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User Guide should include all the details that are needed to use a LG N2B1. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the LG N2B1 N2R1DD2.AUAR01I Storage User Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This LG N2B1 N2R1DD2.AUAR01I Storage User Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download LG N2B1 N2R1DD2.AUAR01I Storage User Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print LG N2B1 N2R1DD2.AUAR01I Storage User Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the LG N2B1 N2R1DD2.AUAR01I Storage User Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.