LG GRUVE HBS-600 Headset User Manual PDF

1 of 36
1 of 36

Summary of Content for LG GRUVE HBS-600 Headset User Manual PDF

English Espaol

Rev 2.0 US All rights reserved.

LG Electronics Inc., 2013

Note: Please read all information carefully prior to using HBS-600 in order to prevent damages to the

product and to enjoy the best performance.

WARNING : This product contains chemicals known to the State

of California to cause cancer and birth defects or reproductive harm.

Wash hands after handling.

HBS-600 User Manual BLUETOOTH Stereo Headset

2

E N

G

Included in the Package

The LG GRUVETM (HBS-600) is a lightweight wireless headset that uses Bluetooth technology. This product can be used as an audio accessory for devices supporting either the A2DP or Hands-Free Bluetooth Profile.

Introduction 3 - Included in the package 3 Description of Parts 4 How to Use 4 - Charging 4 - Low Battery 4 - Battery Status Alert 5 - Power On / Power Off 5 - Pairing 5 - Multi-connection 6 - Auto Reconnect 7 - Audio Streaming Controls 7 - Equalizer 8 - aptX 8 - Volume Control 8 - Calling 8 Answering a call 8 Transferring a call 8 Voice dialing 8 Last number redial 8 Ending a call 8 Call waiting 9 Rejecting a call 9 Mic mute 9 Passive Mode 9 - SMS reader 9 Summary of Button Functions 10 LED Indicator 11 Troubleshooting 11 Specification 12 Precautions 12 Declaration of Confirmation 13 Additional Information 13 Limited Warranty 16 Important Safety Information 16

Table of Contents

HBS-600

3

E N

G

Included in the Package

The LG GRUVETM (HBS-600) is a lightweight wireless headset that uses Bluetooth technology. This product can be used as an audio accessory for devices supporting either the A2DP or Hands-Free Bluetooth Profile.

AUX Cable USB Charging Cable

Introduction

HBS-600

User Manual Warranty Card Quick Start GuidePOUCH

4

Description of Parts

How to Use

Charging

- When the charger is connected, with the power switched on or off, the headset will turn off.

- While charging, the LED indicator will show a solid red light. - When charging is complete, the LED indicator will turn off.

Low Battery

- A low battery alert will play once every 2 minutes. - If the battery is not charged, the headset will turn off.

Power On / Power Off

- Slide the power switch to the ON or OFF position.

Pairing

- Before using the headset for the first time, you must pair it with a Bluetooth-enabled device.

- There are 2 pairing mode methods with the HBS-600.

1) Easy Pairing a) Slide the power switch to the ON position. b) If it is your first time pairing the device it will automatically enter pairing mode.

If it has been paired but no paired device is in range it will enter pairing mode after 10 seconds. The LED indicator will be solid blue.

c) On the device you wish to pair, find the Bluetooth menu and search for new devices.

d) Select LG HBS600 from the list of devices. e) If asked for a Password/Pin Code enter 0000 (4 Zeros). f) Once the devices are paired, you will hear Your headset paired.

The HBS-600 will automatically turn off if not paired within 3 minutes.

2) Manual Pairing (pairing with another phone or re-pairing) a) With the power off, press the PLAY/PAUSE/STOP button and slide the power

switch to the ON position. Hold the PLAY/PAUSE/STOP button until you hear Ready to pair.

Battery Status Alert

- Press and hold the VOLUME DOWN button for 1 second to check the battery status of the HBS-600. The audible battery status alert will inform you of the battery level. There are 3 levels of battery power: 1. Battery High 2. Battery Medium 3. Battery Low

- HBS-600 battery status indicator will appear on the iPhone screen.

Headset

VOLUME UP Button VOLUME DOWN Button

Charging Port

AUX

Speaker (R)CALL Button

LED Indicator

REWIND Button

FAST FORWARD Button

PLAY / PAUSE / STOP Button

Microphone

Power Switch

Speaker (L)

E N

G

5

Power On / Power Off

- Slide the power switch to the ON or OFF position.

Pairing

- Before using the headset for the first time, you must pair it with a Bluetooth-enabled device.

- There are 2 pairing mode methods with the HBS-600.

1) Easy Pairing a) Slide the power switch to the ON position. b) If it is your first time pairing the device it will automatically enter pairing mode.

If it has been paired but no paired device is in range it will enter pairing mode after 10 seconds. The LED indicator will be solid blue.

c) On the device you wish to pair, find the Bluetooth menu and search for new devices.

d) Select LG HBS600 from the list of devices. e) If asked for a Password/Pin Code enter 0000 (4 Zeros). f) Once the devices are paired, you will hear Your headset paired.

The HBS-600 will automatically turn off if not paired within 3 minutes.

2) Manual Pairing (pairing with another phone or re-pairing) a) With the power off, press the PLAY/PAUSE/STOP button and slide the power

switch to the ON position. Hold the PLAY/PAUSE/STOP button until you hear Ready to pair.

Battery Status Alert

- Press and hold the VOLUME DOWN button for 1 second to check the battery status of the HBS-600. The audible battery status alert will inform you of the battery level. There are 3 levels of battery power: 1. Battery High 2. Battery Medium 3. Battery Low

- HBS-600 battery status indicator will appear on the iPhone screen. Charging

Port

AUX

Speaker (R)

How to Use

E N

G

6

Auto Reconnect

- If the HBS-600 is turned off (either accidentally or intentionally) while connected to a phone, the phone and handset will disconnect. The phone and handset will automatically reconnect when the HBS-600 is turned back on while in range.

- The secondary phone will need to be connected manually. Select LG HBS-600 from the list of devices in the Bluetooth menu and pair.

Out of Range - If the paired devices are separated by a range of 30 feet (10 meters) or more, the

headset and phone will disconnect and the HBS-600 will alert the user. - If the headset and phone do not automatically reconnect when they are back within the

required range, briefly press the CALL button on the HBS-600 to reconnect manually. - While in multi-connection and streaming, the inactive paired device, which is out

of range, will be disconnected. The HBS-600 will alert you once with no attempt to reconnect.

b) When the headset enters Pairing Mode, the LED indicator will show a solid blue light. After the procedure repeat Easy Pairing steps c) through f).

How to Use

Multi-connection

Advanced Multipoint The HBS-600 is capable of having two devices connected to the headset at the same time. This will give you the freedom of using call waiting between calls on both of your connected phones.

Connection 1. Pair the headset with one of your Bluetooth-enabled phones. (per the pairing

instructions on page 6). 2. Turn the headset off and use the Manual Pairing method as described on page

5 to enter Pairing Mode. 3. Now, pair and connect the headset with your other Bluetooth-enabled phone.

(this will be your primary phone). 4. Once this phone is paired and connected, go back and connect the originally

paired phone to the headset. This will now be your secondary phone. Note: When the HBS-600 is connected to two phones at the same time(Multipoint), the headset calling functions will work with the primary phone. Note: In case of failure to connect to the primary phone through Easy Pairing, HBS-600 will enter pairing mode.

Calling Function - Voice Dialing and Last Number Redial features work with the primary phone (or

phone which made the last outgoing call).

Call Waiting - While speaking on an active call, press and hold the CALL button for 1 second to

switch to an incoming call. - To switch between 2 active calls, press and hold the CALL button for 1 second. - To end both calls briefly press the CALL button. - If both phones are receiving an incoming call, the headset will default to the

primary device.

Audio Streaming Controls Play - Briefly press the PLAY/PAUSE/STOP button. Pause - While playing music, briefly press the PLAY/PAUSE/STOP button. Stop - While playing music, press and hold the PLAY/PAUSE/STOP button for 1 second. Next song - Briefly press the FAST FORWARD button. Previous song - Briefly press the REWIND button. Fast Forward - Press and hold the FAST FORWARD button. Rewind - Press and hold the REWIND button.

E N

G

7

Auto Reconnect

- If the HBS-600 is turned off (either accidentally or intentionally) while connected to a phone, the phone and handset will disconnect. The phone and handset will automatically reconnect when the HBS-600 is turned back on while in range.

- The secondary phone will need to be connected manually. Select LG HBS-600 from the list of devices in the Bluetooth menu and pair.

Out of Range - If the paired devices are separated by a range of 30 feet (10 meters) or more, the

headset and phone will disconnect and the HBS-600 will alert the user. - If the headset and phone do not automatically reconnect when they are back within the

required range, briefly press the CALL button on the HBS-600 to reconnect manually. - While in multi-connection and streaming, the inactive paired device, which is out

of range, will be disconnected. The HBS-600 will alert you once with no attempt to reconnect.

b) When the headset enters Pairing Mode, the LED indicator will show a solid blue light. After the procedure repeat Easy Pairing steps c) through f).

Advanced Multipoint The HBS-600 is capable of having two devices connected to the headset at the same time. This will give you the freedom of using call waiting between calls on both of your connected phones.

Connection 1. Pair the headset with one of your Bluetooth-enabled phones. (per the pairing

instructions on page 6). 2. Turn the headset off and use the Manual Pairing method as described on page

5 to enter Pairing Mode. 3. Now, pair and connect the headset with your other Bluetooth-enabled phone.

(this will be your primary phone). 4. Once this phone is paired and connected, go back and connect the originally

paired phone to the headset. This will now be your secondary phone. Note: When the HBS-600 is connected to two phones at the same time(Multipoint), the headset calling functions will work with the primary phone. Note: In case of failure to connect to the primary phone through Easy Pairing, HBS-600 will enter pairing mode.

Calling Function - Voice Dialing and Last Number Redial features work with the primary phone (or

phone which made the last outgoing call).

Call Waiting - While speaking on an active call, press and hold the CALL button for 1 second to

switch to an incoming call. - To switch between 2 active calls, press and hold the CALL button for 1 second. - To end both calls briefly press the CALL button. - If both phones are receiving an incoming call, the headset will default to the

primary device.

Audio Streaming Controls Play - Briefly press the PLAY/PAUSE/STOP button. Pause - While playing music, briefly press the PLAY/PAUSE/STOP button. Stop - While playing music, press and hold the PLAY/PAUSE/STOP button for 1 second. Next song - Briefly press the FAST FORWARD button. Previous song - Briefly press the REWIND button. Fast Forward - Press and hold the FAST FORWARD button. Rewind - Press and hold the REWIND button.

How to Use

E N

G

8

How to Use

Volume Control - Press the VOLUME UP or VOLUME DOWN button to adjust the speaker volume. - There are eight levels of speaker volume in Hands-Free mode. - There are eight levels of speaker volume in Audio Streaming mode.

aptX

- The HBS-600 features aptX technology that ensures audio content transmitted over Bluetooth is instant and crystal-clear.

- aptX is automatically enabled as long as the source device supports it.

Calling Answering a Call - When there is an incoming call, the headset will ring. - Briefly press the CALL button to answer the incoming call. Transferring a Call - If you make a call from the phone, the call will (depending on the phone settings)

automatically transfer to the headset. If the call is not automatically transferred, you can manually transfer the call to, or from, the headset by pressing and holding VOLUME UP button for 3 seconds on the HBS-600 (phone and headset must be paired).

Voice Dialing - Briefly press the CALL button to activate Voice Command. For best results,

record the voice dialing tag through your headset. Note: If your phone does not support voice dialing, this action may activate Last

Number Redial. Last Number Redial - Press and hold the CALL button for 1 second to activate Last Number Redial.

The headset will beep and then call the last number dialed. Ending a Call - Briefly press the CALL button.

Equalizer - While playing music, press and hold the VOLUME UP and VOLUME

DOWN buttons at the same time for 1 second to switch between EQs (Bass Boost(Default) g Normal g Treble Boost).

Call Waiting - Answer a second call without hanging up the first call by pressing and holding the CALL button for 1 second. Press and hold the CALL button for 1 second to return to the original call.

- Briefly press the CALL button to terminate both calls at once. Rejecting a Call - Activate call reject by pressing and holding the CALL button for 1 second when the phone rings.

* These functions may only be used if your phone supports them. For further information about using these features, please consult your phones user manual.

Mic Mute - Press and hold the VOLUME UP and VOLUME DOWN buttons at the same time for

1 second to mute/unmute the Mic during conversation. Wired headphone mode - You can use HBS-600 as a wired headphone.

No charged battery is required and you can enjoy the audio quality of wired headphone.

- Simply connect straight type(3-pole) jack of the included AUX cable to the bottom of the earcup and angle type(4-pole) jack to AV equipment(i.e., handset, MP3 player or headphone jack on air plane seats, etc.).

- Inserting an audio cable disables wireless functionality. (HBS-600 will be powered off)

SMS Reader

The HBS-600 Bluetooth headset supports SMS reading on Android based devices. In Google Play search for the LG BT Reader Plus application and install it on your device to use this function. * The QR code shown here helps you download the LG

BT Reader Plus application from Google Play. Google Play is a trademark of Google, Inc.

E N

G

9

- Press the VOLUME UP or VOLUME DOWN button to adjust the speaker volume. - There are eight levels of speaker volume in Hands-Free mode. - There are eight levels of speaker volume in Audio Streaming mode.

- The HBS-600 features aptX technology that ensures audio content transmitted over Bluetooth is instant and crystal-clear.

- aptX is automatically enabled as long as the source device supports it.

Answering a Call - When there is an incoming call, the headset will ring. - Briefly press the CALL button to answer the incoming call. Transferring a Call - If you make a call from the phone, the call will (depending on the phone settings)

automatically transfer to the headset. If the call is not automatically transferred, you can manually transfer the call to, or from, the headset by pressing and holding VOLUME UP button for 3 seconds on the HBS-600 (phone and headset must be paired).

Voice Dialing - Briefly press the CALL button to activate Voice Command. For best results,

record the voice dialing tag through your headset. Note: If your phone does not support voice dialing, this action may activate Last

Number Redial. Last Number Redial - Press and hold the CALL button for 1 second to activate Last Number Redial.

The headset will beep and then call the last number dialed. Ending a Call - Briefly press the CALL button.

- While playing music, press and hold the VOLUME UP and VOLUME DOWN buttons at the same time for 1 second to switch between EQs (Bass Boost(Default) g Normal g Treble Boost).

Call Waiting - Answer a second call without hanging up the first call by pressing and holding the CALL button for 1 second. Press and hold the CALL button for 1 second to return to the original call.

- Briefly press the CALL button to terminate both calls at once. Rejecting a Call - Activate call reject by pressing and holding the CALL button for 1 second when the phone rings.

* These functions may only be used if your phone supports them. For further information about using these features, please consult your phones user manual.

Mic Mute - Press and hold the VOLUME UP and VOLUME DOWN buttons at the same time for

1 second to mute/unmute the Mic during conversation. Wired headphone mode - You can use HBS-600 as a wired headphone.

No charged battery is required and you can enjoy the audio quality of wired headphone.

- Simply connect straight type(3-pole) jack of the included AUX cable to the bottom of the earcup and angle type(4-pole) jack to AV equipment(i.e., handset, MP3 player or headphone jack on air plane seats, etc.).

- Inserting an audio cable disables wireless functionality. (HBS-600 will be powered off)

SMS Reader

The HBS-600 Bluetooth headset supports SMS reading on Android based devices. In Google Play search for the LG BT Reader Plus application and install it on your device to use this function. * The QR code shown here helps you download the LG

BT Reader Plus application from Google Play. Google Play is a trademark of Google, Inc.

How to Use

E N

G

10

Function HBS-600 Status Action Power on Power off Slide the power switch to the ON position. Power off Power on Slide the power switch to the OFF position.

Volume up Talking/Playing music Briefly press the VOLUME UP button.

Volume down Talking/Playing music Briefly press the VOLUME DOWN button.

Transferring a call Talking Press and hold VOLUME UP button for 3 seconds.

Answering a call Ringing Briefly press the CALL button. Ending a call Talking Briefly press the CALL button. Call waiting Talking Press and hold the CALL button for 1 second. Last number redial Idle Press and hold the CALL button for 1 second. Voice dialing (phone must support) Idle Briefly press the CALL button.

Call reject Ringing Press and hold the CALL button for 1 second.

Mic mute on/off Talking Press and hold the VOLUME UP and VOLUME DOWN buttons at the same time for 1 second.

Pairing mode (Manual) Power off Press the PLAY/PAUSE/STOP button and slide

the power switch to the ON position.

Battery status check Idle Press and hold the VOLUME DOWN button for 1 second.

Play Power on Briefly press the PLAY/PAUSE/STOP button. Pause Playing music Briefly press the PLAY/PAUSE/STOP button.

Stop Playing music Press and hold the PLAY/PAUSE/STOP button for 1 second.

Next song Playing music Briefly press the FAST FORWARD button. Previous song Playing music Briefly press the REWIND button. Fast forward Playing music Press and hold the FAST FORWARD button. Rewind Playing music Press and hold the REWIND button.

Equalizer settings Playing music Press and hold the VOLUME UP and VOLUME DOWN buttons at the same time for 1 second.

Wired headphone mode

Power on / Power off Connect AUX cable

Summary of Button Functions

Function HBS-600 Status Action

Operating

Power on The blue LED light flickers 4 times.

Power off The blue LED light flickers 4 times and then turns off.

Pairing mode The solid blue LED light stays on. Headset / hands-free profile connected

The blue LED light flickers 2 times every 5 seconds.

Call connected The blue LED light flickers 2 times every 5 seconds.

Charging Charging The red LED stays on. Charging complete LED turns off.

Issue Possible problem Resolution

Does not turn on Check whether the battery of the HBS-600 is fully charged. Charge the battery.

Unable to communicate with the LG Bluetooth Headset HBS-600

Check whether the phone supports the headset or hands-free Bluetooth profiles.

Determine whether your phone supports the headset or hands- free Bluetooth profiles.

Check whether the battery of the HBS-600 is low. Charge the battery.

Unable to pair the HBS-600 with the Bluetooth device

Check and make sure the headset is on.

Slide the power switch to the ON position to turn on the headset.

Check and make sure the headset is placed in pairing mode.

With the power off, press the PLAY/PAUSE/STOP button and slide the power switch to the ON position. Hold the CALL button for about 2 seconds to manually place the headset in pairing mode.

Low sound (speaker) Check the speaker volume. lncrease the volume level.

E N

G

11

Function HBS-600 Status Action Power on Power off Slide the power switch to the ON position. Power off Power on Slide the power switch to the OFF position.

Volume up Talking/Playing music Briefly press the VOLUME UP button.

Volume down Talking/Playing music Briefly press the VOLUME DOWN button.

Transferring a call Talking Press and hold VOLUME UP button for 3 seconds.

Answering a call Ringing Briefly press the CALL button. Ending a call Talking Briefly press the CALL button. Call waiting Talking Press and hold the CALL button for 1 second. Last number redial Idle Press and hold the CALL button for 1 second. Voice dialing (phone must support) Idle Briefly press the CALL button.

Call reject Ringing Press and hold the CALL button for 1 second.

Mic mute on/off Talking Press and hold the VOLUME UP and VOLUME DOWN buttons at the same time for 1 second.

Pairing mode (Manual) Power off Press the PLAY/PAUSE/STOP button and slide

the power switch to the ON position.

Battery status check Idle Press and hold the VOLUME DOWN button for 1 second.

Play Power on Briefly press the PLAY/PAUSE/STOP button. Pause Playing music Briefly press the PLAY/PAUSE/STOP button.

Stop Playing music Press and hold the PLAY/PAUSE/STOP button for 1 second.

Next song Playing music Briefly press the FAST FORWARD button. Previous song Playing music Briefly press the REWIND button. Fast forward Playing music Press and hold the FAST FORWARD button. Rewind Playing music Press and hold the REWIND button.

Equalizer settings Playing music Press and hold the VOLUME UP and VOLUME DOWN buttons at the same time for 1 second.

Wired headphone mode

Power on / Power off Connect AUX cable

Function HBS-600 Status Action

Operating

Power on The blue LED light flickers 4 times.

Power off The blue LED light flickers 4 times and then turns off.

Pairing mode The solid blue LED light stays on. Headset / hands-free profile connected

The blue LED light flickers 2 times every 5 seconds.

Call connected The blue LED light flickers 2 times every 5 seconds.

Charging Charging The red LED stays on. Charging complete LED turns off.

Issue Possible problem Resolution

Does not turn on Check whether the battery of the HBS-600 is fully charged. Charge the battery.

Unable to communicate with the LG Bluetooth Headset HBS-600

Check whether the phone supports the headset or hands-free Bluetooth profiles.

Determine whether your phone supports the headset or hands- free Bluetooth profiles.

Check whether the battery of the HBS-600 is low. Charge the battery.

Unable to pair the HBS-600 with the Bluetooth device

Check and make sure the headset is on.

Slide the power switch to the ON position to turn on the headset.

Check and make sure the headset is placed in pairing mode.

With the power off, press the PLAY/PAUSE/STOP button and slide the power switch to the ON position. Hold the CALL button for about 2 seconds to manually place the headset in pairing mode.

Low sound (speaker) Check the speaker volume. lncrease the volume level.

LED Indicator

Troubleshooting

E N

G

12

Specification

Precautions

Item Description Bluetooth specification 3.0 (Headset / Hands-Free / A2DP Profiles)

Battery Battery 3.7V / 370mAh Li-Polymer

Talk Time Up to 18Hrs

Music play time Up to 18Hrs

Standby time Up to 900Hrs

Charging time < 3.0Hrs

Operation temperature 14F ~ 140F (-10C ~ 60C)

Dimension / weight 167mm(W) x 175(L) x 64.6(T)/145g

Do not drop the headset.

Do not modify, repair, or disassemble.

Do not expose directly to water, alcohol, benzene, etc for cleaning.

Do not expose directly to flammables.

Do not place or keep the headset near flammables.

Keep the headset away from excessive humidity and dust.

Do not place heavy objects on the headset.

Only charge the headset with an original LG charger, otherwise it may be damaged.

Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment.

There is a risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.

1. Radio frequency exposure This Bluetooth Stereo Headset HBS-600, is a radio transmitter and receiver. When in operation it communicates with a Bluetooth equipped mobile device by receiving and transmitting radio frequency (RF) electromagnetic fields (microwaves) in the frequency range 2.4 to 2.4835 GHz. Your Bluetooth Headset is designed to operate in compliance with the RF exposure guidelines and limits set by national authorities and international health agencies when used any compatible LG Electronics mobile phone.

FCC NOTICE TO USERS: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that

may cause undesired operation.

IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure requirements and void users authority to operate the device.

CE NOTICE TO USERS: Hereby, LG Electronics Inc. declares that this HBS-600 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

E N

G

13

Do not drop the headset.

Do not modify, repair, or disassemble.

Do not expose directly to water, alcohol, benzene, etc for cleaning.

Do not expose directly to flammables.

Do not place or keep the headset near flammables.

Keep the headset away from excessive humidity and dust.

Do not place heavy objects on the headset.

Only charge the headset with an original LG charger, otherwise it may be damaged.

Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment.

There is a risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.

1. Radio frequency exposure This Bluetooth Stereo Headset HBS-600, is a radio transmitter and receiver. When in operation it communicates with a Bluetooth equipped mobile device by receiving and transmitting radio frequency (RF) electromagnetic fields (microwaves) in the frequency range 2.4 to 2.4835 GHz. Your Bluetooth Headset is designed to operate in compliance with the RF exposure guidelines and limits set by national authorities and international health agencies when used any compatible LG Electronics mobile phone.

FCC NOTICE TO USERS: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that

may cause undesired operation.

IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure requirements and void users authority to operate the device.

CE NOTICE TO USERS: Hereby, LG Electronics Inc. declares that this HBS-600 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

Declaration of Confirmation

Additional Information

FCC ID: BEJHBS600 1177

E N

G

14

2. Potentially explosive atmosphere Turn off your electronic device when in any area with a potentially explosive atmosphere. Although this is uncommon, your electronic device could generate sparks. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Areas with a potentially explosive atmosphere are often, but not always, clearly marked.

3.Emergency calls IMPORTANT! This Bluetooth headset and the electronic device connected to the headset operate using radio signals, mobile and landline networks as well as user - programmed functions, which cannot guarantee connection under all conditions. Therefore you should never rely solely upon any electronic device for essential communications (e.g. medical emergencies). Remember, in order to make or receive calls, the headset and the electronic device connected to the headset must be switched on and in a service area with adequate mobile signal strength. Emergency calls may not be possible on all mobile phone networks or when certain network services and/or phone features are in use. Check with your local service provider.

4. Battery information A rechargeable battery has a long service life if treated properly. A new battery or one that has not been used for a long period of time could have reduced capacity the first few times it is used. Do not expose the battery to extreme temperatures, never above +60C(+140F) or under -20C(-4F). For maximum battery capacity, use the battery at room temperature. If the battery is used in low temperatures, the battery capacity will be reduced. The battery can only be charged in temperatures between +10C(+50F) and +45C (+113F). For your safety, do not remove the battery incorperated in the product. If you need to replace the battery, take it to the nearest authorised LG Electronics service point or dealer for assistance.

5. Recycling the battery in your Bluetooth headset The battery in your Bluetooth Headset must be disposed of properly and should never be placed in municipal waste. The LG Electronics service partner who removes the battery will dispose of it according to local regulations.

Additional Information

6. Conditions - The warranty is valid only if the original receipt issued to the original purchaser by

the dealer, specifying the date of purchase and serial number, is presented with the product to be repaired or replaced. LG Electronics reserves the right to refuse warranty service if this information has been removed or changed after the original purchase of the product from the dealer.

- If LG Electronics repairs or replaces the product, the repaired or replaced product shall be warranted for the remaining time of the original warranty period or for ninety (90) days from the date of repair, whichever is longer. Repair or replacement may involve the use of functionally equivalent reconditioned units. Replaced parts or components will become the property of LG Electronics.

- This Warranty does not cover any failure of the product due to normal wear and tear, or due to misuse, including but not limited to use in other than the normal and customary manner, in accordance with instructions for use and maintenance of the product. Nor does this warranty cover any failure of the product due to accident, modification or adjustment, acts of God or damage resulting from liquid.

- This warranty does not cover product failures due to improper repair installations, modifications or service performed by a non- LG Electronics authorized person. Tampering with any of the seals on the product will void the warranty.

- THERE ARE NO EXPRESS WARRANTIES, WHETHER WRITTEN OR ORAL, OTHER THAN THIS PRINTED INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. IN NO EVENT SHALL LG ELECTRONICS OR ITS VENDORS BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE WHATSOEVER, INCLUDING BUT NOT LIMITED TO LOST PROFITS OR COMMERCIAL LOSS, TO THE FULL EXTENT THOSE DAMAGES CAN BE DISCLAIMED BY LAW.

Some countries/states do not allow the exclusion or limitation of incidental or consequential damages, or limitation of the duration of implied warranties, so the preceding limitations or exclusions may not apply to you. The warranty provided does not affect the consumers statutory rights under applicable national legislation in force, nor the consumers rights against the dealer arising from their sales/purchase contract.

E N

G

15

2. Potentially explosive atmosphere Turn off your electronic device when in any area with a potentially explosive atmosphere. Although this is uncommon, your electronic device could generate sparks. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Areas with a potentially explosive atmosphere are often, but not always, clearly marked.

3.Emergency calls IMPORTANT! This Bluetooth headset and the electronic device connected to the headset operate using radio signals, mobile and landline networks as well as user - programmed functions, which cannot guarantee connection under all conditions. Therefore you should never rely solely upon any electronic device for essential communications (e.g. medical emergencies). Remember, in order to make or receive calls, the headset and the electronic device connected to the headset must be switched on and in a service area with adequate mobile signal strength. Emergency calls may not be possible on all mobile phone networks or when certain network services and/or phone features are in use. Check with your local service provider.

4. Battery information A rechargeable battery has a long service life if treated properly. A new battery or one that has not been used for a long period of time could have reduced capacity the first few times it is used. Do not expose the battery to extreme temperatures, never above +60C(+140F) or under -20C(-4F). For maximum battery capacity, use the battery at room temperature. If the battery is used in low temperatures, the battery capacity will be reduced. The battery can only be charged in temperatures between +10C(+50F) and +45C (+113F). For your safety, do not remove the battery incorperated in the product. If you need to replace the battery, take it to the nearest authorised LG Electronics service point or dealer for assistance.

5. Recycling the battery in your Bluetooth headset The battery in your Bluetooth Headset must be disposed of properly and should never be placed in municipal waste. The LG Electronics service partner who removes the battery will dispose of it according to local regulations.

6. Conditions - The warranty is valid only if the original receipt issued to the original purchaser by

the dealer, specifying the date of purchase and serial number, is presented with the product to be repaired or replaced. LG Electronics reserves the right to refuse warranty service if this information has been removed or changed after the original purchase of the product from the dealer.

- If LG Electronics repairs or replaces the product, the repaired or replaced product shall be warranted for the remaining time of the original warranty period or for ninety (90) days from the date of repair, whichever is longer. Repair or replacement may involve the use of functionally equivalent reconditioned units. Replaced parts or components will become the property of LG Electronics.

- This Warranty does not cover any failure of the product due to normal wear and tear, or due to misuse, including but not limited to use in other than the normal and customary manner, in accordance with instructions for use and maintenance of the product. Nor does this warranty cover any failure of the product due to accident, modification or adjustment, acts of God or damage resulting from liquid.

- This warranty does not cover product failures due to improper repair installations, modifications or service performed by a non- LG Electronics authorized person. Tampering with any of the seals on the product will void the warranty.

- THERE ARE NO EXPRESS WARRANTIES, WHETHER WRITTEN OR ORAL, OTHER THAN THIS PRINTED INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. IN NO EVENT SHALL LG ELECTRONICS OR ITS VENDORS BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE WHATSOEVER, INCLUDING BUT NOT LIMITED TO LOST PROFITS OR COMMERCIAL LOSS, TO THE FULL EXTENT THOSE DAMAGES CAN BE DISCLAIMED BY LAW.

Some countries/states do not allow the exclusion or limitation of incidental or consequential damages, or limitation of the duration of implied warranties, so the preceding limitations or exclusions may not apply to you. The warranty provided does not affect the consumers statutory rights under applicable national legislation in force, nor the consumers rights against the dealer arising from their sales/purchase contract.

Additional Information

E N

G

16

Subject to the conditions of this Limited Warranty, LG Electronics warrants this product to be free from defects in design, material and workmanship at the time of its original purchase by a consumer, and for a subsequent period of one (1) year. Should your product need warranty service, please return it to the dealer from whom it was purchased or contact your local LG Electronics contact center to get further information.

Avoiding hearing damage Permanent hearing loss may occur if you use your headset at a high volume. Set the volume to a safe level. Over time you can become accustomed to a higher volume that may sound normal but can be damaging to your hearing. If you experience ringing in your ears or muffled speech, stop listening and have your hearing checked. The louder the volume, the less time is required before your hearing could be affected. Hearing experts suggest that to protect your hearing: Limit the amount of time you use the headset at high volume. Avoid turning up the volume to block out noisy surroundings. Turn the volume down if you cant hear people speaking near you.

Using Headsets safely Use of headsets to listen to music while operating a vehicle is not recommended and is illegal in some areas. Be careful and attentive while driving. Stop using this device if you find it disruptive or distracting while operating any type of vehicle or performing any other activity that requires your full attention.

Limited Warranty

Important Safety Information

HBS-600 Manual del usuario Auricular estreo BLUETOOTH

E N

G

Subject to the conditions of this Limited Warranty, LG Electronics warrants this product to be free from defects in design, material and workmanship at the time of its original purchase by a consumer, and for a subsequent period of one (1) year. Should your product need warranty service, please return it to the dealer from whom it was purchased or contact your local LG Electronics contact center to get further information.

Avoiding hearing damage Permanent hearing loss may occur if you use your headset at a high volume. Set the volume to a safe level. Over time you can become accustomed to a higher volume that may sound normal but can be damaging to your hearing. If you experience ringing in your ears or muffled speech, stop listening and have your hearing checked. The louder the volume, the less time is required before your hearing could be affected. Hearing experts suggest that to protect your hearing: Limit the amount of time you use the headset at high volume. Avoid turning up the volume to block out noisy surroundings. Turn the volume down if you cant hear people speaking near you.

Using Headsets safely Use of headsets to listen to music while operating a vehicle is not recommended and is illegal in some areas. Be careful and attentive while driving. Stop using this device if you find it disruptive or distracting while operating any type of vehicle or performing any other activity that requires your full attention.

English Espaol

Todos los derechos reservados. LG Electronics Inc., 2013

Nota: lea toda la informacin con detenimiento antes de usar el adaptador HBS-600 para

evitar daos en el producto y obtener el mejor rendimiento.

ADVERTENCIA: Este producto contiene qumicos que, a saber del

Estado de California, pueden provocar cncer y defectos congnitos o daos al sistema reproductor.

Lave sus manos despus de manipular el producto.

HBS-600 Manual del usuario Auricular estreo BLUETOOTH

2

Contenido del embalaje

El auricular LG GRUVETM (HBS-600) es un dispositivo inalmbrico muy liviano que utiliza tecnologa Bluetooth. Este producto se puede utilizar como un accesorio de audio para los dispositivos que admiten los perfiles A2DP o manos libres Bluetooth.

E S

P

Introduccin 3 - Contenido del embalaje 3 Descripcin de las partes 4 Modo de uso 4 - Carga 4 - Batera baja 4 - Alerta del estado de la batera 5 - Encendido / Apagado 5 - Emparejamiento 5 - Multi conexin 6 - Reconectar automticamente 7 - Controles de transmisin de audio 7 - Ecualizador 8 - aptX 8 - Control de volumen 8 - Llamar 8 Responder una llamada 8 Transferir una llamada 8 Marcado por voz 8 Remarcado del ltimo nmero 8 Finalizar una llamada 8 Llamada en espera 9 Cmo rechazar una llamada 9 Silenciar micrfono 9 Modo pasivo 9 - Lector de texto 9 Resumen de funciones de los botones 10 Indicador LED 11 Resolucin de problemas 11 Especificacin 12 Precauciones 12 Declaracin de confirmacin 13 Informacin adicional 13 Garanta limitada 16 Informacin importante de seguridad 16

Contenido

3

Contenido del embalaje

El auricular LG GRUVETM (HBS-600) es un dispositivo inalmbrico muy liviano que utiliza tecnologa Bluetooth. Este producto se puede utilizar como un accesorio de audio para los dispositivos que admiten los perfiles A2DP o manos libres Bluetooth.

Cable AUX Cable de carga USB

Introduccin

HBS-600

E S

P

Gua del usuario Documento de garanta

Gua de inicio rpido

Funda

4

Encendido / apagado

- Deslice el interruptor de encendido hacia la posicin "ON" (Encendido) u "OFF" (Apagado).

Asociacin

- Antes de usar el auricular por primera vez, debe emparejarlo con un dispositivo con Bluetooth activado.

- Existen 2 modos de emparejamiento para el auricular HBS-600. 1) Asociacin fcil

a) Mueva el interruptor hacia la posicin ON (Encendido). b) Si es la primera vez que empareja el dispositivo entrar automticamente al

modo de emparejamiento. Si se ha emparejado, pero no hay ningn dispositivo emparejado dentro del rango, entrar en modo de emparejamiento luego de 10 segundos. *El indicador LED estar de color azul esttico.

c) En el dispositivo que desee emparejar, encuentre el men Bluetooth y busque nuevos dispositivos.

d) Seleccione LG HBS600 desde la lista de dispositivos. e) Si le solicita una contrasea o cdigo pin ingrese 0000 (4 ceros). f) Luego de haberse emparejado los dispositivos, escuchar Your headset paired

(su auricular se emparej). El HBS-600 se apagar automticamente si no se empareja dentro de 3 minutos.

2) Emparejamiento manual (emparejamiento con otro telfono o re-emparejamiento) a) Con el dispositivo apagado, presione el botn REPRODUCIR/PAUSAR/

DETENER y deslice el interruptor hacia la posicin "ON" (Encendido). Mantenga presionado el botn REPRODUCIR/PAUSAR/DETENER hasta que escuche "Ready to pair" (listo para emparejar).

Alerta de estado de la batera

- Mantenga presionado el botn BAJAR VOLUMEN durante 1 segundo para verificar el estado de la batera del HBS-600. La alerta audible del estado de batera le informar el nivel de la batera. Existen 3 niveles de energa de la batera: 1. Nivel alto 2. Nivel medio 3. Nivel bajo

- El estado de la batera del HBS-600 aparecer en la pantalla del iPhone.

Descripcin de las partes

Modo de uso

Carga

- Una vez conectado el cargador, con la unidad encendida o apagada, el auricular se apagar.

- Mientras se est cargando, el indicador LED mostrar una luz roja constante. - Cuando la carga est completa, el indicador LED se apagar.

Batera baja

- Se emitir una alerta de batera baja cada 2 minutos. - Si la batera no est cargada, el auricular se apagar.

Auricular

Botn SUBIR VOLUMEN Botn BAJAR VOLUMEN

Carga Puerto

AUX

Altavoz (R)Botn de llamada

Indicador LED

Botn rebobinar

Botn adelantar

Botn REPRODUCIR/ PAUSAR/DETENER

Micrfono

Interruptor de encendido/apagado

Altavoz (L)

E S

P

5

Encendido / apagado

- Deslice el interruptor de encendido hacia la posicin "ON" (Encendido) u "OFF" (Apagado).

Asociacin

- Antes de usar el auricular por primera vez, debe emparejarlo con un dispositivo con Bluetooth activado.

- Existen 2 modos de emparejamiento para el auricular HBS-600. 1) Asociacin fcil

a) Mueva el interruptor hacia la posicin ON (Encendido). b) Si es la primera vez que empareja el dispositivo entrar automticamente al

modo de emparejamiento. Si se ha emparejado, pero no hay ningn dispositivo emparejado dentro del rango, entrar en modo de emparejamiento luego de 10 segundos. *El indicador LED estar de color azul esttico.

c) En el dispositivo que desee emparejar, encuentre el men Bluetooth y busque nuevos dispositivos.

d) Seleccione LG HBS600 desde la lista de dispositivos. e) Si le solicita una contrasea o cdigo pin ingrese 0000 (4 ceros). f) Luego de haberse emparejado los dispositivos, escuchar Your headset paired

(su auricular se emparej). El HBS-600 se apagar automticamente si no se empareja dentro de 3 minutos.

2) Emparejamiento manual (emparejamiento con otro telfono o re-emparejamiento) a) Con el dispositivo apagado, presione el botn REPRODUCIR/PAUSAR/

DETENER y deslice el interruptor hacia la posicin "ON" (Encendido). Mantenga presionado el botn REPRODUCIR/PAUSAR/DETENER hasta que escuche "Ready to pair" (listo para emparejar).

Alerta de estado de la batera

- Mantenga presionado el botn BAJAR VOLUMEN durante 1 segundo para verificar el estado de la batera del HBS-600. La alerta audible del estado de batera le informar el nivel de la batera. Existen 3 niveles de energa de la batera: 1. Nivel alto 2. Nivel medio 3. Nivel bajo

- El estado de la batera del HBS-600 aparecer en la pantalla del iPhone. Carga Puerto

AUX

Altavoz (R)

Modo de uso

E S

P

6

Reconexin automtica

- Si se apaga el auricular HBS-600 (ya sea intencional o accidentalmente) mientras est conectado a un telfono, el auricular y el telfono se desconectarn. El auricular y el telfono volvern a conectarse automticamente cuando el HBS-600 vuelva a encenderse y est dentro del rango.

- El telfono secundario deber conectarse manualmente. Seleccione LG HBS- 600 desde la lista de dispositivos en el men Bluetooth y empareje.

Fuera de rango - Si los dispositivos asociados se separan por un rango de 10 metros (30 pies) o

ms, el auricular y el telfono se desconectarn, provocando que el HBS-600 alerte al usuario.

- Si no se vuelven a conectar automticamente cuando vuelvan a estar dentro de la distancia necesaria, presione brevemente el botn LLAMAR del auricular HBS-600 para proceder a la reconexin manual.

- Estando en multiconexin y transmisin, se desconectar el dispositivo emparejado inactivo que est fuera de rango. El HBS-600 le alertar una vez sin intentos de reconexin.

Controles de transmisin de audio Reproducir - Presione brevemente el botn REPRODUCIR/PAUSAR/DETENER. Pausar - Mientras reproduce msica, presione brevemente el botn REPRODUCIR/ PAUSAR/DETENER. Detener - Mientras reproduce msica, mantenga presionado el botn REPRODUCIR/

PAUSAR/DETENER durante 1 segundo. Siguiente cancin - Presione brevemente el botn ADELANTAR. Cancin anterior - Presione brevemente el botn REBOBINAR. Adelantar - Presione y mantenga presionado el botn ADELANTAR. Rebobinar - Mantenga presionado el botn REBOBINAR.

b) Cuando el auricular ingrese al modo de emparejamiento, el indicador LED mostrar una luz azul esttica. Despus de este procedimiento, repita los pasos del "c)" al "f)" del emparejamiento fcil.

Modo de uso

Multiconexin

Conexin avanzada de varios puntos El auricular HBS-600 puede tener conectados dos dispositivos al mismo tiempo. Esto le da la libertad de utilizar la funcin de llamada en espera entre las llamadas en los dos telfonos conectados.

Conexin 1. Empareje el auricular con uno de sus telfonos compatibles con Bluetooth.

(consulte las instrucciones de asociacin en la pgina 6). 2. Apague el auricular use el mtodo de Emparejamiento manual como se

describe en la pgina 5 para ingresar al Modo de emparejamiento. 3. A continuacin, proceda a emparejar y conectar el auricular con el otro telfono

con Bluetooth habilitado. (este ser ahora el telfono principal). 4. Una vez que este telfono est asociado y conectado, vuelva a conectar

el primer telfono asociado con el auricular. Este ser ahora el telfono secundario.

Nota: cuando el HBS-600 est conectado a dos auriculares al mismo tiempo (varios puntos), las funciones de llamada del auricular funcionarn con el telfono principal. Nota: en caso de que no se conecte al telfono principal mediante Asociacin fcil, el HBS-600 pasar al modo de emparejamiento.

Funcin de llamada - Las funciones Marcado por voz y Remarcado del ltimo nmero funcionarn

en el telfono principal (o el telfono con el cual se haya realizado la ltima llamada saliente).

Llamada en espera - Mientras se encuentra en una llamada activa, presione el botn LLAMAR

durante 1 segundo para responder una nueva llamada entrante. - Para alternar entre las 2 llamadas activas, presione el botn LLAMAR durante

1 segundo. - Para finalizar ambas llamadas, presione brevemente el botn LLAMAR. - Si ambos telfonos reciben una llamada entrante, el auricular responder

primero la llamada del telfono principal.

E S

P

7

Reconexin automtica

- Si se apaga el auricular HBS-600 (ya sea intencional o accidentalmente) mientras est conectado a un telfono, el auricular y el telfono se desconectarn. El auricular y el telfono volvern a conectarse automticamente cuando el HBS-600 vuelva a encenderse y est dentro del rango.

- El telfono secundario deber conectarse manualmente. Seleccione LG HBS- 600 desde la lista de dispositivos en el men Bluetooth y empareje.

Fuera de rango - Si los dispositivos asociados se separan por un rango de 10 metros (30 pies) o

ms, el auricular y el telfono se desconectarn, provocando que el HBS-600 alerte al usuario.

- Si no se vuelven a conectar automticamente cuando vuelvan a estar dentro de la distancia necesaria, presione brevemente el botn LLAMAR del auricular HBS-600 para proceder a la reconexin manual.

- Estando en multiconexin y transmisin, se desconectar el dispositivo emparejado inactivo que est fuera de rango. El HBS-600 le alertar una vez sin intentos de reconexin.

Controles de transmisin de audio Reproducir - Presione brevemente el botn REPRODUCIR/PAUSAR/DETENER. Pausar - Mientras reproduce msica, presione brevemente el botn REPRODUCIR/ PAUSAR/DETENER. Detener - Mientras reproduce msica, mantenga presionado el botn REPRODUCIR/

PAUSAR/DETENER durante 1 segundo. Siguiente cancin - Presione brevemente el botn ADELANTAR. Cancin anterior - Presione brevemente el botn REBOBINAR. Adelantar - Presione y mantenga presionado el botn ADELANTAR. Rebobinar - Mantenga presionado el botn REBOBINAR.

Modo de uso

b) Cuando el auricular ingrese al modo de emparejamiento, el indicador LED mostrar una luz azul esttica. Despus de este procedimiento, repita los pasos del "c)" al "f)" del emparejamiento fcil.

Conexin avanzada de varios puntos El auricular HBS-600 puede tener conectados dos dispositivos al mismo tiempo. Esto le da la libertad de utilizar la funcin de llamada en espera entre las llamadas en los dos telfonos conectados.

Conexin 1. Empareje el auricular con uno de sus telfonos compatibles con Bluetooth.

(consulte las instrucciones de asociacin en la pgina 6). 2. Apague el auricular use el mtodo de Emparejamiento manual como se

describe en la pgina 5 para ingresar al Modo de emparejamiento. 3. A continuacin, proceda a emparejar y conectar el auricular con el otro telfono

con Bluetooth habilitado. (este ser ahora el telfono principal). 4. Una vez que este telfono est asociado y conectado, vuelva a conectar

el primer telfono asociado con el auricular. Este ser ahora el telfono secundario.

Nota: cuando el HBS-600 est conectado a dos auriculares al mismo tiempo (varios puntos), las funciones de llamada del auricular funcionarn con el telfono principal. Nota: en caso de que no se conecte al telfono principal mediante Asociacin fcil, el HBS-600 pasar al modo de emparejamiento.

Funcin de llamada - Las funciones Marcado por voz y Remarcado del ltimo nmero funcionarn

en el telfono principal (o el telfono con el cual se haya realizado la ltima llamada saliente).

Llamada en espera - Mientras se encuentra en una llamada activa, presione el botn LLAMAR

durante 1 segundo para responder una nueva llamada entrante. - Para alternar entre las 2 llamadas activas, presione el botn LLAMAR durante

1 segundo. - Para finalizar ambas llamadas, presione brevemente el botn LLAMAR. - Si ambos telfonos reciben una llamada entrante, el auricular responder

primero la llamada del telfono principal.

E S

P

8

Llamada en espera - Atienda una segunda llamada sin cortar la llamada en curso, presionando y manteniendo presionado el botn LLAMAR durante 1 segundo. Vuelva a presionar el botn LAMAR durante 1 segundo y volver a la llamada original.

- Presione brevemente el botn de llamada para finalizar ambas llamadas al mismo tiempo. Rechazar una llamada - Active la funcin para rechazar una llamada presionando el botn LLAMAR por 1 segundo mientras est sonando el telfono.

* Estas funciones se pueden usar solo si su telfono es compatible con ellas. Si desea ms informacin acerca del uso de esas funciones, consulte el manual del usuario provisto con su telfono.

Silenciar micrfono - Mantenga presionados los botones SUBIR VOLUMEN y BAJAR VOLUMEN simultneamente

durante 1 segundo para silenciar o anular el silencio del micrfono durante la conversacin. Modo auricular almbrico - Puede usar al HBS-600 como un auricular

almbrico. No se requiere una batera cargada y puede disfrutar de la calidad de audio de un auricular almbrico.

- Solo inserte el conector directo (3-polos) del cable AUX incluido a la parte inferior del auricular y el conector en ngulo (4-polos) al equipo de AV (vale decir, telfono, reproductor de MP3 o conector para auriculares en los asientos de un avin, etc.).

- Al insertar un cable de audio se desactiva la funcionalidad inalmbrica. (HBS-600 se apagar)

Lector de texto

El auricular Bluetooth HBS-600 admite la lectura de SMS en dispositivos basados en Android. En Google Play, busque la aplicacin LG BT Reader Plus e instlela en su aparato para utilizar esta funcin. * El cdigo QR que se muestra aqu le permite descargar

la aplicacin BT Reader Plus de LG desde Google Play. Google Play es una marca registrada de Google, Inc.

Modo de uso

Control de volumen - Con los botones para subir y bajar el volumen, ajuste el volumen del altavoz. - Existen ocho niveles de volumen para el altavoz en el modo de manos libres. - Existen ocho niveles de volumen para el altavoz en el modo de transmisin

de audio.

aptX

- El HBS-600 incluye la tecnologa aptX, que garantiza que el audio transmitido a travs de Bluetooth sea claro e instantneo y claro.

- aptX se habilita automticamente en tanto sea compatible con el dispositivo de origen.

Llamadas Responder una llamada - Cuando reciba una llamada entrante, el auricular comenzar a sonar. - Presione brevemente el botn LLAMAR para contestar la llamada entrante. Transferir una llamada - Si realiza una llamada desde el telfono, sta (sujeta a la configuracin del telfono) se transferir

automticamente al auricular. Si la llamada no se transfiere automticamente, puede transferirla manualmente hacia o desde el auricular manteniendo presionado el botn SUBIR VOLUMEN del HBS-600 durante 3 segundos (el telfono y el auricular deben estar asociados).

Marcado por voz - Presione brevemente el botn LLAMAR para activar el "Comando de voz". Para obtener

mejores resultados, grabe la etiqueta de discado de voz en su dispositivo. Nota: si su telfono no es compatible con el discado por voz, esta accin podra activar el

rediscado del ltimo nmero. Volver a marcar el ltimo nmero - Mantenga presionado el botn LLAMAR por 1 segundo para activar el Remarcado del

ltimo nmero. El auricular emitir un pitido y, a continuacin, llamar al ltimo nmero marcado.

Finalizar una llamada - Presione brevemente el botn de llamada.

Ecualizador - Mientras est reproduciendo msica, mantenga presionados los botones SUBIR

VOLUMEN y BAJAR VOLUMEN al mismo tiempo durante 1 minuto para cambiar entre los distintos modos de ecualizacin (Aumento de bajos (predeterminado) g Normal g Aumento de agudos).

E S

P

9

Llamada en espera - Atienda una segunda llamada sin cortar la llamada en curso, presionando y manteniendo presionado el botn LLAMAR durante 1 segundo. Vuelva a presionar el botn LAMAR durante 1 segundo y volver a la llamada original.

- Presione brevemente el botn de llamada para finalizar ambas llamadas al mismo tiempo. Rechazar una llamada - Active la funcin para rechazar una llamada presionando el botn LLAMAR por 1 segundo mientras est sonando el telfono.

* Estas funciones se pueden usar solo si su telfono es compatible con ellas. Si desea ms informacin acerca del uso de esas funciones, consulte el manual del usuario provisto con su telfono.

Silenciar micrfono - Mantenga presionados los botones SUBIR VOLUMEN y BAJAR VOLUMEN simultneamente

durante 1 segundo para silenciar o anular el silencio del micrfono durante la conversacin. Modo auricular almbrico - Puede usar al HBS-600 como un auricular

almbrico. No se requiere una batera cargada y puede disfrutar de la calidad de audio de un auricular almbrico.

- Solo inserte el conector directo (3-polos) del cable AUX incluido a la parte inferior del auricular y el conector en ngulo (4-polos) al equipo de AV (vale decir, telfono, reproductor de MP3 o conector para auriculares en los asientos de un avin, etc.).

- Al insertar un cable de audio se desactiva la funcionalidad inalmbrica. (HBS-600 se apagar)

Lector de texto

El auricular Bluetooth HBS-600 admite la lectura de SMS en dispositivos basados en Android. En Google Play, busque la aplicacin LG BT Reader Plus e instlela en su aparato para utilizar esta funcin. * El cdigo QR que se muestra aqu le permite descargar

la aplicacin BT Reader Plus de LG desde Google Play. Google Play es una marca registrada de Google, Inc.

Modo de uso

- Con los botones para subir y bajar el volumen, ajuste el volumen del altavoz. - Existen ocho niveles de volumen para el altavoz en el modo de manos libres. - Existen ocho niveles de volumen para el altavoz en el modo de transmisin

de audio.

- El HBS-600 incluye la tecnologa aptX, que garantiza que el audio transmitido a travs de Bluetooth sea claro e instantneo y claro.

- aptX se habilita automticamente en tanto sea compatible con el dispositivo de origen.

Responder una llamada - Cuando reciba una llamada entrante, el auricular comenzar a sonar. - Presione brevemente el botn LLAMAR para contestar la llamada entrante. Transferir una llamada - Si realiza una llamada desde el telfono, sta (sujeta a la configuracin del telfono) se transferir

automticamente al auricular. Si la llamada no se transfiere automticamente, puede transferirla manualmente hacia o desde el auricular manteniendo presionado el botn SUBIR VOLUMEN del HBS-600 durante 3 segundos (el telfono y el auricular deben estar asociados).

Marcado por voz - Presione brevemente el botn LLAMAR para activar el "Comando de voz". Para obtener

mejores resultados, grabe la etiqueta de discado de voz en su dispositivo. Nota: si su telfono no es compatible con el discado por voz, esta accin podra activar el

rediscado del ltimo nmero. Volver a marcar el ltimo nmero - Mantenga presionado el botn LLAMAR por 1 segundo para activar el Remarcado del

ltimo nmero. El auricular emitir un pitido y, a continuacin, llamar al ltimo nmero marcado.

Finalizar una llamada - Presione brevemente el botn de llamada.

- Mientras est reproduciendo msica, mantenga presionados los botones SUBIR VOLUMEN y BAJAR VOLUMEN al mismo tiempo durante 1 minuto para cambiar entre los distintos modos de ecualizacin (Aumento de bajos (predeterminado) g Normal g Aumento de agudos).

E S

P

10

Funcin Estado de HBS-600 Accin

En funcionamiento

Encender La luz de LED azul parpadea 4 veces. Apagar La luz de LED azul parpadea 4 veces y luego se apaga. Modo de asociacin La luz LED color azul esttico permanece encendida. Perfil auricular / manos libres conectado

El indicador LED azul parpadea 2 veces cada 5 segundos.

Llamada conectada El indicador LED azul parpadea 2 veces cada 5 segundos.

Carga Carga El indicador LED rojo queda encendido, sin parpadear. Carga completa El indicador LED se apaga.

Problema Problema posible Resolucin El dispositivo no se enciende.

Compruebe si la batera del auricular HBS-600 est totalmente cargada. Cargue la batera.

No se puede establecer comunicacin con el auricular Bluetooth HBS-600 de LG.

Compruebe si el telfono admite los perfiles de auriculares o manos libres Bluetooth.

Determine si su telfono admite los perfiles de auriculares o manos libres Bluetooth.

Compruebe si el nivel de carga de la batera del auricular HBS-600 es bajo. Cargue la batera.

No se puede emparejar el auricular HBS-600 con el dispositivo Bluetooth

Compruebe que el auricular est encendido.

Deslice el interruptor hacia la posicin "ON" (Encendido) para encender el auricular.

Compruebe que el auricular se encuentre en el modo de asociacin.

Con el dispositivo apagado, presione el botn REPRODUCIR/PAUSAR/DETENER y deslice el interruptor hacia la posicin "ON" (Encendido). Mantenga presionado el botn CALL (Llamar) por cerca de 2 segundos para colocar al auricular manualmente en modo emparejamiento.

Sonido bajo (altavoz) Verifique el volumen del altavoz. Aumente el nivel de volumen.

Funcin Estado de HBS-600 Accin Encender Apagar Deslice el interruptor hacia la posicin ON (Encendido). Apagar Encender Deslice el interruptor hacia la posicin "OFF" (Apagado). Subir volumen Hablar/reproducir msica Presione brevemente el botn para subir el volumen. Bajar volumen Hablar/reproducir msica Presione brevemente el botn para bajar el volumen.

Transferir una llamada Hablando Mantenga presionado el botn SUBIR VOLUMEN durante 3 segundos.

Responder una llamada Sonando Presione brevemente el botn de llamada. Finalizar una llamada Hablando Presione brevemente el botn de llamada. Llamada en espera Hablando Presione el botn LLAMAR durante 1 segundo. Volver a marcar el ltimo nmero Inactivo Presione el botn LLAMAR durante 1 segundo. Marcado por voz (el telfono debe admitir esta funcin)

Inactivo Presione brevemente el botn de llamada.

Rechazar una llamada Sonando Presione el botn LLAMAR durante 1 segundo. Silenciar o anular el silencio del micrfono Hablando Mantenga presionados los botones SUBIR VOLUMEN y

BAJAR VOLUMEN simultneamente por 1 segundo.

Modo de asociacin (manual) Apagar Presione el botn REPRODUCIR/PAUSAR/DETENER para deslizar el interruptor de energa hacia la posicin "ON" (Encendido).

Verificar el estado de la batera Inactivo Mantenga presionado el botn BAJAR VOLUMEN durante

1 segundo. Reproducir Encender Presione brevemente el botn REPRODUCIR/PAUSAR/

DETENER. Pausar Reproducir msica Presione brevemente el botn REPRODUCIR/PAUSAR/

DETENER. Detener Reproducir msica Mantenga presionado el botn REPRODUCIR/PAUSAR/

DETENER durante 1 segundo. Siguiente cancin Reproducir msica Presione brevemente el botn ADELANTAR. Cancin anterior Reproducir msica Presione brevemente el botn REBOBINAR. Adelantar Reproducir msica Presione y mantenga presionado el botn ADELANTAR. Rebobinar Reproducir msica Presione y mantenga presionado el botn REBOBINAR.

Configuracin del ecualizador Reproducir msica Mantenga presionados los botones SUBIR VOLUMEN y BAJAR VOLUMEN simultneamente por 1 segundo.

Modo auricular almbrico Encendido / apagado Conexin del cable AUX

Resumen de las funciones de los botones

E S

P

11

Funcin Estado de HBS-600 Accin

En funcionamiento

Encender La luz de LED azul parpadea 4 veces. Apagar La luz de LED azul parpadea 4 veces y luego se apaga. Modo de asociacin La luz LED color azul esttico permanece encendida. Perfil auricular / manos libres conectado

El indicador LED azul parpadea 2 veces cada 5 segundos.

Llamada conectada El indicador LED azul parpadea 2 veces cada 5 segundos.

Carga Carga El indicador LED rojo queda encendido, sin parpadear. Carga completa El indicador LED se apaga.

Problema Problema posible Resolucin El dispositivo no se enciende.

Compruebe si la batera del auricular HBS-600 est totalmente cargada. Cargue la batera.

No se puede establecer comunicacin con el auricular Bluetooth HBS-600 de LG.

Compruebe si el telfono admite los perfiles de auriculares o manos libres Bluetooth.

Determine si su telfono admite los perfiles de auriculares o manos libres Bluetooth.

Compruebe si el nivel de carga de la batera del auricular HBS-600 es bajo. Cargue la batera.

No se puede emparejar el auricular HBS-600 con el dispositivo Bluetooth

Compruebe que el auricular est encendido.

Deslice el interruptor hacia la posicin "ON" (Encendido) para encender el auricular.

Compruebe que el auricular se encuentre en el modo de asociacin.

Con el dispositivo apagado, presione el botn REPRODUCIR/PAUSAR/DETENER y deslice el interruptor hacia la posicin "ON" (Encendido). Mantenga presionado el botn CALL (Llamar) por cerca de 2 segundos para colocar al auricular manualmente en modo emparejamiento.

Sonido bajo (altavoz) Verifique el volumen del altavoz. Aumente el nivel de volumen.

Indicador LED

Solucin de problemas

Funcin Estado de HBS-600 Accin Encender Apagar Deslice el interruptor hacia la posicin ON (Encendido). Apagar Encender Deslice el interruptor hacia la posicin "OFF" (Apagado). Subir volumen Hablar/reproducir msica Presione brevemente el botn para subir el volumen. Bajar volumen Hablar/reproducir msica Presione brevemente el botn para bajar el volumen.

Transferir una llamada Hablando Mantenga presionado el botn SUBIR VOLUMEN durante 3 segundos.

Responder una llamada Sonando Presione brevemente el botn de llamada. Finalizar una llamada Hablando Presione brevemente el botn de llamada. Llamada en espera Hablando Presione el botn LLAMAR durante 1 segundo. Volver a marcar el ltimo nmero Inactivo Presione el botn LLAMAR durante 1 segundo. Marcado por voz (el telfono debe admitir esta funcin)

Inactivo Presione brevemente el botn de llamada.

Rechazar una llamada Sonando Presione el botn LLAMAR durante 1 segundo. Silenciar o anular el silencio del micrfono Hablando Mantenga presionados los botones SUBIR VOLUMEN y

BAJAR VOLUMEN simultneamente por 1 segundo.

Modo de asociacin (manual) Apagar Presione el botn REPRODUCIR/PAUSAR/DETENER para deslizar el interruptor de energa hacia la posicin "ON" (Encendido).

Verificar el estado de la batera Inactivo Mantenga presionado el botn BAJAR VOLUMEN durante

1 segundo. Reproducir Encender Presione brevemente el botn REPRODUCIR/PAUSAR/

DETENER. Pausar Reproducir msica Presione brevemente el botn REPRODUCIR/PAUSAR/

DETENER. Detener Reproducir msica Mantenga presionado el botn REPRODUCIR/PAUSAR/

DETENER durante 1 segundo. Siguiente cancin Reproducir msica Presione brevemente el botn ADELANTAR. Cancin anterior Reproducir msica Presione brevemente el botn REBOBINAR. Adelantar Reproducir msica Presione y mantenga presionado el botn ADELANTAR. Rebobinar Reproducir msica Presione y mantenga presionado el botn REBOBINAR.

Configuracin del ecualizador Reproducir msica Mantenga presionados los botones SUBIR VOLUMEN y BAJAR VOLUMEN simultneamente por 1 segundo.

Modo auricular almbrico Encendido / apagado Conexin del cable AUX

E S

P

12

1. Exposicin a la radiofrecuencia Este auricular estreo Bluetooth, modelo HBS-600, es un transmisor y receptor de radio. Cuando est en funcionamiento, se comunica con un dispositivo mvil compatible con Bluetooth mediante la recepcin y la transmisin de campos electromagnticos (microondas) de radiofrecuencia (RF) en el rango de 2,4 a 2,4835 GHz. El auricular Bluetooth est diseado para un funcionamiento conforme a los lineamientos y los lmites de exposicin a la radiofrecuencia establecidos por autoridades nacionales y organismos internacionales de salud pblica, cuando se lo utiliza en conjunto con cualquier telfono mvil compatible de LG Electronics.

AVISO DE LA FCC PARA LOS USUARIOS Este dispositivo cumple con la seccin 15 de la normativa de la FCC. El funcionamiento est sujeto a las dos condiciones siguientes: (1) Este dispositivo no puede causar interferencia nociva (2) Este dispositivo debe aceptar cualquier interferencia que reciba, incluida la que

provoque un funcionamiento no deseado.

NOTA IMPORTANTE Para satisfacer los requisitos de exposicin a la radiofrecuencia, estipulados por la FCC, no se permite alteracin alguna de la antena o del dispositivo. Todo cambio realizado en la antena o el dispositivo podra derivar en que el dispositivo supere los requisitos de exposicin a RF; en consecuencia, se podra anular la autoridad del usuario para utilizar el producto.

AVISO DE LA CE PARA LOS USUARIOS: Mediante la presente, LG Electronics Inc. declara que el HBS-600 se encuentra en conformidad con los requisitos esenciales y otras clusulas pertinentes de la Directiva 1999/5/EC.

Especificaciones

Precauciones

Elemento Descripcin Especificacin Bluetooth 3.0 (perfiles manos libres/auricular/A2DP)

Batera Batera de polmero litio de 3,7V / 370mAh

Duracin en conversacin Hasta 18 horas

Tiempo de reproduccin de msica Hasta 18 horas

Duracin en espera Hasta 900 horas

Tiempo de carga < 3,0Hrs

Temperatura operativa -10 C ~ 60 C (14 F ~ 140 F)

Dimensiones y peso 167mm (A) x 175 (I) x 64.6 (T)/145g

No deje caer el dispositivo.

No lo modifique, repare ni desarme.

Para limpiar el dispositivo, no lo moje con agua, alcohol, bencina ni otros lquidos.

No lo exponga directamente a materiales inflamables.

No lo coloque ni lo deje cerca de materiales inflamables.

Mantenga al auricular alejado de excesiva humedad y polvo.

No coloque objetos pesados sobre el auricular.

Cargue este producto solamente con un cargador original de LG. De lo contrario, el auricular podra daarse.

Las modificaciones o los cambios que no estn expresamente aprobados por la parte responsable del cumplimiento podran anular la autoridad del usuario para utilizar el producto.

Si se reemplaza la batera por otra de un tipo incorrecto, existe riesgo de explosin.

Deseche las bateras usadas segn las instrucciones correspondientes.

E S

P

13

1. Exposicin a la radiofrecuencia Este auricular estreo Bluetooth, modelo HBS-600, es un transmisor y receptor de radio. Cuando est en funcionamiento, se comunica con un dispositivo mvil compatible con Bluetooth mediante la recepcin y la transmisin de campos electromagnticos (microondas) de radiofrecuencia (RF) en el rango de 2,4 a 2,4835 GHz. El auricular Bluetooth est diseado para un funcionamiento conforme a los lineamientos y los lmites de exposicin a la radiofrecuencia establecidos por autoridades nacionales y organismos internacionales de salud pblica, cuando se lo utiliza en conjunto con cualquier telfono mvil compatible de LG Electronics.

AVISO DE LA FCC PARA LOS USUARIOS Este dispositivo cumple con la seccin 15 de la normativa de la FCC. El funcionamiento est sujeto a las dos condiciones siguientes: (1) Este dispositivo no puede causar interferencia nociva (2) Este dispositivo debe aceptar cualquier interferencia que reciba, incluida la que

provoque un funcionamiento no deseado.

NOTA IMPORTANTE Para satisfacer los requisitos de exposicin a la radiofrecuencia, estipulados por la FCC, no se permite alteracin alguna de la antena o del dispositivo. Todo cambio realizado en la antena o el dispositivo podra derivar en que el dispositivo supere los requisitos de exposicin a RF; en consecuencia, se podra anular la autoridad del usuario para utilizar el producto.

AVISO DE LA CE PARA LOS USUARIOS: Mediante la presente, LG Electronics Inc. declara que el HBS-600 se encuentra en conformidad con los requisitos esenciales y otras clusulas pertinentes de la Directiva 1999/5/EC.

Aviso de conformidad

Informacin adicional

FCC ID: BEJHBS600 1177No deje caer el dispositivo.

No lo modifique, repare ni desarme.

Para limpiar el dispositivo, no lo moje con agua, alcohol, bencina ni otros lquidos.

No lo exponga directamente a materiales inflamables.

No lo coloque ni lo deje cerca de materiales inflamables.

Mantenga al auricular alejado de excesiva humedad y polvo.

No coloque objetos pesados sobre el auricular.

Cargue este producto solamente con un cargador original de LG. De lo contrario, el auricular podra daarse.

Las modificaciones o los cambios que no estn expresamente aprobados por la parte responsable del cumplimiento podran anular la autoridad del usuario para utilizar el producto.

Si se reemplaza la batera por otra de un tipo incorrecto, existe riesgo de explosin.

Deseche las bateras usadas segn las instrucciones correspondientes.

E S

P

14

6. Condiciones - La garanta tiene validez nicamente si, junto con el producto que se va a

reparar o reemplazar, se presenta la factura original que el distribuidor le emiti al comprador original. LG Electronics se reserva el derecho de denegar el servicio de garanta si no se presenta dicha informacin o si hubiera habido modificaciones luego de la compra original del producto al distribuidor.

- Si LG Electronics repara o reemplaza el producto, el plazo de garanta del producto reemplazado o reparado equivaldr al tiempo restante del plazo de garanta original o noventa (90) das a partir de la fecha de reparacin, el perodo que sea mayor. La reparacin o el reemplazo podran implicar el uso de unidades reacondicionadas con funciones equivalentes. Los componentes o las piezas reemplazadas pasarn a ser propiedad de LG Electronics.

- La presente garanta no cubre falla alguna por desgaste natural ni uso indebido, entre otros casos, usos fuera de lo normal y acostumbrado, conforme a las instrucciones de uso y mantenimiento del producto. La cobertura tampoco abarca fallas del producto que se deban a accidentes, modificaciones o ajustes, caso fortuito o dao producido por algn lquido.

- La garanta no cubre fallas del producto a causa de instalaciones, reparaciones o modificaciones incorrectas llevadas a cabo por personas que no estn autorizadas por LG Electronics. Todo indicio de manipulacin en cualquiera de los sellos del producto anular la garanta.

- NO EXISTEN GARANTAS EXPRESAS, NI ORALES NI ESCRITAS, SALVO LAS QUE CONSTAN EN EL PRESENTE DOCUMENTO, INCLUIDAS, PERO NO EN FORMA TAXATIVA, LAS GARANTAS IMPLCITAS DE COMERCIALIZACIN O IDONEIDAD PARA UN FIN DETERMINADO. LA DURACIN DE CUALQUIER GARANTA IMPLCITA SE LIMITA AL PLAZO DE LA PRESENTE GARANTA LIMITADA. ASIMISMO, LG ELECTRONICS O SUS DISTRIBUIDORES NO SERN RESPONSABLES, EN NINGUNA CIRCUNSTANCIA, DE DAOS FORTUITOS O CONSECUENCIAS DE NDOLE ALGUNA, ENTRE ELLOS, PERO NO EN FORMA TAXATIVA, PRDIDAS COMERCIALES O DE GANANCIAS, HASTA EL MXIMO PERMITIDO POR LA LEY EN CUANTO AL DESCARGO DE RESPONSABILIDAD POR ESOS DAOS.

En algunos estados y pases, no se permite la exclusin o la limitacin de daos fortuitos y sus consecuencias, ni la limitacin del plazo de las garantas implcitas. Por lo tanto, las exclusiones o limitaciones de los prrafos anteriores podran no aplicarse en su caso. La garanta provista no afecta los derechos del consumidor establecidos por la legislacin nacional pertinente en vigencia ni los derechos del consumidor en relacin con el distribuidor que surjan del contrato de compra-venta.

2. Atmsferas potencialmente explosivas Cuando se encuentre en una atmsfera potencialmente explosiva, apague el dispositivo electrnico. Aunque es poco frecuente, este dispositivo electrnico podra generar chispas. En esos lugares, las chispas podran ocasionar una explosin o un incendio y, como consecuencia, lesiones o incluso la muerte. Las zonas con riesgo de explosin suelen estar claramente sealadas, aunque no es as en todos los casos.

3. Llamadas de emergencia Importante Este auricular Bluetooth y el dispositivo electrnico conectado a l funcionan con seales de radio, redes terrestres y mviles, adems de funciones programadas por el usuario, que no pueden garantizar la conexin en todas las situaciones. Por lo tanto, nunca debe depender nicamente de un dispositivo electrnico para casos de comunicaciones esenciales (por ej. emergencias mdicas). Recuerde que, para realizar o recibir llamadas, el auricular y el dispositivo electrnico conectado a l deben estar encendidos y en un rea de servicio con una seal mvil de buena potencia. Las llamadas de emergencia no pueden hacerse en todas las redes de telefona celular ni cuando estn en uso ciertos servicios de red o funciones del telfono. Solicite asesoramiento a su proveedor de servicios local.

4. Informacin de la batera Las bateras recargables tienen una vida til prolongada si reciben el tratamiento adecuado. Las bateras nuevas o que no se hayan utilizado por un lapso extenso podran ver mermada su capacidad las primeras veces que se utilizan. No exponga la batera a temperaturas extremas, nunca superiores a +60 SDgrC (+140 SDgrF) o inferiores a -20 SDgrC (-4 SDgrF). Para obtener la mxima capacidad de la batera, sela a temperatura ambiente. Si se utiliza la batera en condiciones de temperaturas bajas, la capacidad se ver reducida. La batera solo puede cargarse en temperaturas entre +10 SDgrC (+50 SDgrF) y +45 SDgrC (+113 SDgrF). Por su seguridad, no extraiga la batera incorporada a este producto. Si necesita reemplazar la batera, lleve la unidad al distribuidor o centro de servicio tcnico autorizado por LG Electronics para obtener ayuda.

5. Reciclado de la batera del auricular Bluetooth

La batera del auricular Bluetooth debe desecharse con el procedimiento adecuado y nunca debe arrojarse al basurero municipal. Los encargados de servicio tcnico de LG Electronics que extraigan bateras las desecharn de acuerdo con las reglamentaciones locales.

Informacin adicional

E S

P

15

6. Condiciones - La garanta tiene validez nicamente si, junto con el producto que se va a

reparar o reemplazar, se presenta la factura original que el distribuidor le emiti al comprador original. LG Electronics se reserva el derecho de denegar el servicio de garanta si no se presenta dicha informacin o si hubiera habido modificaciones luego de la compra original del producto al distribuidor.

- Si LG Electronics repara o reemplaza el producto, el plazo de garanta del producto reemplazado o reparado equivaldr al tiempo restante del plazo de garanta original o noventa (90) das a partir de la fecha de reparacin, el perodo que sea mayor. La reparacin o el reemplazo podran implicar el uso de unidades reacondicionadas con funciones equivalentes. Los componentes o las piezas reemplazadas pasarn a ser propiedad de LG Electronics.

- La presente garanta no cubre falla alguna por desgaste natural ni uso indebido, entre otros casos, usos fuera de lo normal y acostumbrado, conforme a las instrucciones de uso y mantenimiento del producto. La cobertura tampoco abarca fallas del producto que se deban a accidentes, modificaciones o ajustes, caso fortuito o dao producido por algn lquido.

- La garanta no cubre fallas del producto a causa de instalaciones, reparaciones o modificaciones incorrectas llevadas a cabo por personas que no estn autorizadas por LG Electronics. Todo indicio de manipulacin en cualquiera de los sellos del producto anular la garanta.

- NO EXISTEN GARANTAS EXPRESAS, NI ORALES NI ESCRITAS, SALVO LAS QUE CONSTAN EN EL PRESENTE DOCUMENTO, INCLUIDAS, PERO NO EN FORMA TAXATIVA, LAS GARANTAS IMPLCITAS DE COMERCIALIZACIN O IDONEIDAD PARA UN FIN DETERMINADO. LA DURACIN DE CUALQUIER GARANTA IMPLCITA SE LIMITA AL PLAZO DE LA PRESENTE GARANTA LIMITADA. ASIMISMO, LG ELECTRONICS O SUS DISTRIBUIDORES NO SERN RESPONSABLES, EN NINGUNA CIRCUNSTANCIA, DE DAOS FORTUITOS O CONSECUENCIAS DE NDOLE ALGUNA, ENTRE ELLOS, PERO NO EN FORMA TAXATIVA, PRDIDAS COMERCIALES O DE GANANCIAS, HASTA EL MXIMO PERMITIDO POR LA LEY EN CUANTO AL DESCARGO DE RESPONSABILIDAD POR ESOS DAOS.

En algunos estados y pases, no se permite la exclusin o la limitacin de daos fortuitos y sus consecuencias, ni la limitacin del plazo de las garantas implcitas. Por lo tanto, las exclusiones o limitaciones de los prrafos anteriores podran no aplicarse en su caso. La garanta provista no afecta los derechos del consumidor establecidos por la legislacin nacional pertinente en vigencia ni los derechos del consumidor en relacin con el distribuidor que surjan del contrato de compra-venta.

Informacin adicional

2. Atmsferas potencialmente explosivas Cuando se encuentre en una atmsfera potencialmente explosiva, apague el dispositivo electrnico. Aunque es poco frecuente, este dispositivo electrnico podra generar chispas. En esos lugares, las chispas podran ocasionar una explosin o un incendio y, como consecuencia, lesiones o incluso la muerte. Las zonas con riesgo de explosin suelen estar claramente sealadas, aunque no es as en todos los casos.

3. Llamadas de emergencia Importante Este auricular Bluetooth y el dispositivo electrnico conectado a l funcionan con seales de radio, redes terrestres y mviles, adems de funciones programadas por el usuario, que no pueden garantizar la conexin en todas las situaciones. Por lo tanto, nunca debe depender nicamente de un dispositivo electrnico para casos de comunicaciones esenciales (por ej. emergencias mdicas). Recuerde que, para realizar o recibir llamadas, el auricular y el dispositivo electrnico conectado a l deben estar encendidos y en un rea de servicio con una seal mvil de buena potencia. Las llamadas de emergencia no pueden hacerse en todas las redes de telefona celular ni cuando estn en uso ciertos servicios de red o funciones del telfono. Solicite asesoramiento a su proveedor de servicios local.

4. Informacin de la batera Las bateras recargables tienen una vida til prolongada si reciben el tratamiento adecuado. Las bateras nuevas o que no se hayan utilizado por un lapso extenso podran ver mermada su capacidad las primeras veces que se utilizan. No exponga la batera a temperaturas extremas, nunca superiores a +60 SDgrC (+140 SDgrF) o inferiores a -20 SDgrC (-4 SDgrF). Para obtener la mxima capacidad de la batera, sela a temperatura ambiente. Si se utiliza la batera en condiciones de temperaturas bajas, la capacidad se ver reducida. La batera solo puede cargarse en temperaturas entre +10 SDgrC (+50 SDgrF) y +45 SDgrC (+113 SDgrF). Por su seguridad, no extraiga la batera incorporada a este producto. Si necesita reemplazar la batera, lleve la unidad al distribuidor o centro de servicio tcnico autorizado por LG Electronics para obtener ayuda.

5. Reciclado de la batera del auricular Bluetooth

La batera del auricular Bluetooth debe desecharse con el procedimiento adecuado y nunca debe arrojarse al basurero municipal. Los encargados de servicio tcnico de LG Electronics que extraigan bateras las desecharn de acuerdo con las reglamentaciones locales.

E S

P

16

Sujeta a las condiciones de la presente garanta limitada, LG Electronics garantiza que este producto no presenta fallas de diseo, materiales ni mano de obra en el momento en que el consumidor realiza la compra original, y que no las presentar por un perodo posterior de un (1) ao. En caso de que el producto requiera servicio tcnico de garanta, srvase llevarlo al establecimiento del distribuidor que se lo vendi o comunquese con el centro de contacto de LG Electronics en su regin para obtener ms informacin.

Reduccin de la capacidad auditiva: Podra ocurrir una prdida permanente de la audicin en caso de usar su auricular a un volumen alto. Coloque el volumen a un nivel seguro. Con el tiempo, puede que se acostumbre a un volumen ms alto que podra parecerle normal, pero estar daando su capacidad auditiva. Si experimenta pitidos en sus odos o escucha las voces muy bajo, deje de usar el auricular y haga que un especialista revise sus odos. Conforme sube el volumen, se requiere menos tiempo antes de que el sentido del odo pueda quedar afectado. Algunos expertos en audicin sugieren que, para proteger el sentido del odo, se debe: Limitar el tiempo de uso del auricular a volumen alto. Evitar subir el volumen para contrarrestar excesos de ruido ambiente. Bajar el volumen si no oye a la gente que habla cerca de usted.

Uso seguro de los auriculares No se recomienda utilizar auricular para escuchar msica mientras conduce un vehculo y, en algunas zonas, es ilegal hacerlo. Sea precavido y cauto al conducir. No utilice el dispositivo si le resulta molesto o lo distrae mientras maneja cualquier tipo de vehculo o realiza alguna otra actividad que requiera toda su atencin.

Garanta limitada

Informacin importante de seguridad

E S

P

MEMO

Sujeta a las condiciones de la presente garanta limitada, LG Electronics garantiza que este producto no presenta fallas de diseo, materiales ni mano de obra en el momento en que el consumidor realiza la compra original, y que no las presentar por un perodo posterior de un (1) ao. En caso de que el producto requiera servicio tcnico de garanta, srvase llevarlo al establecimiento del distribuidor que se lo vendi o comunquese con el centro de contacto de LG Electronics en su regin para obtener ms informacin.

Reduccin de la capacidad auditiva: Podra ocurrir una prdida permanente de la audicin en caso de usar su auricular a un volumen alto. Coloque el volumen a un nivel seguro. Con el tiempo, puede que se acostumbre a un volumen ms alto que podra parecerle normal, pero estar daando su capacidad auditiva. Si experimenta pitidos en sus odos o escucha las voces muy bajo, deje de usar el auricular y haga que un especialista revise sus odos. Conforme sube el volumen, se requiere menos tiempo antes de que el sentido del odo pueda quedar afectado. Algunos expertos en audicin sugieren que, para proteger el sentido del odo, se debe: Limitar el tiempo de uso del auricular a volumen alto. Evitar subir el volumen para contrarrestar excesos de ruido ambiente. Bajar el volumen si no oye a la gente que habla cerca de usted.

Uso seguro de los auriculares No se recomienda utilizar auricular para escuchar msica mientras conduce un vehculo y, en algunas zonas, es ilegal hacerlo. Sea precavido y cauto al conducir. No utilice el dispositivo si le resulta molesto o lo distrae mientras maneja cualquier tipo de vehculo o realiza alguna otra actividad que requiera toda su atencin.

M

Manualsnet FAQs

If you want to find out how the GRUVE LG works, you can view and download the LG GRUVE HBS-600 Headset User Manual on the Manualsnet website.

Yes, we have the User Manual for LG GRUVE as well as other LG manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User Manual should include all the details that are needed to use a LG GRUVE. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the LG GRUVE HBS-600 Headset User Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This LG GRUVE HBS-600 Headset User Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download LG GRUVE HBS-600 Headset User Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print LG GRUVE HBS-600 Headset User Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the LG GRUVE HBS-600 Headset User Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.