LG LP0817WSR LP0817WSR.AWYAOSH Air Conditioner Owner's Manual PDF

EN G LIS

H ES PA O L

P/NO : COV34636802 Rev.3

www.lg.com Copyright 2016 - 2018 LG Electronics Inc. All Rights Reserved.

Read this owner's manual thoroughly before operating the appliance and retain it for future reference.

TYPE : PORTABLE AIR CONDITIONER

MODEL : LP0817WSR LP1017WSR LP1217GSR LP1417SHR LP1417GSR LP1417WSRSM

COV34636802 2018. 4. 23. 5:11 1

2

.................................8 ........................................10

...................................................................12

........................................7

...........................................................6 ......................................3

...........................................15 .............................16 ..............................16

........................17 ....................18

................20 ......................................................22

........................24 .....................................................25

..............................................25 .......................................26

........................................27

............................29

TABLE OF CONTENTS

Important Safety Instructions Electrical Safety

Before Using the Air Conditioner Control Panel and Remote Operation

Installation in Vertical-Sliding Windows Installation in Horizontal-Sliding Windows Heating Drainage

Emptying the Water Collection Tank

.................................13Using Smart ThinQ Application

......................................................30Arbitration Notice

SMART FUNCTIONS

COV34636802 2018. 4. 23. 5:11 2

SAFETY INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

WARNING

Installation

Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and follow all safety messages.

This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or injure you and others. All safety messages will follow the safety alert symbol and either the word WARNING or CAUTION.

WARNING If you do not follow instructions, it could result in death or serious injury.

CAUTION If you do not follow instructions, it could result in minor or moderate injury or damage to the product.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what may happen if the instructions are not followed.

To reduce the risk of explosion, fire, death, electric shock, injury or scalding to persons when using this product, follow basic precautions, including the following:

Before use, the appliance must be properly installed as described in this manual. Connect to a properly rated, protected, and sized power circuit to avoid electrical overload. Always plug into a grounded outlet. Do not, under any circumstances, cut or remove the third (ground) prong from the power cord. When installing or moving the appliance, be careful not to pinch, crush, or damage the power cord. Do not modify or extend the power cord. Do not disassemble or modify the product. Adhere to all industry recommended safety procedures including the use of long-sleeved gloves and safety glasses.

Use care when unpacking and installing. The edges of the product may be sharp. Disconnect the power cord or circuit breaker before installing or servicing the appliance. Keep packaging materials out of the reach of children. These materials can pose a suffocation risk to children.

Store and install the product where it will not be exposed to temperatures below freezing or exposed to outdoor weather conditions.

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

EN G LIS

H

3

COV34636802 2018. 4. 23. 5:11 3

4

SAFETY INSTRUCTIONS

Operation Use this appliance only for its intended purpose. Never attempt to operate this appliance if it is damaged, malfunctioning, partially disassembled, or has missing or broken parts, including a damaged cord or plug.

Repair or immediately replace all power cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end.

Do not run cord under carpets or mats where it could be stepped on and damaged. Keep the cord out from under heavy objects like tables or chairs. Do not place the power cord near a heat source. Do not use an adaptor or plug the product into a shared outlet. If you detect a strange sound, a chemical or burning smell, or smoke coming from the appliance, unplug it immediately, and contact an LG Electronics Customer Information Center.

Never unplug the appliance by pulling on the power cord. Always grip the plug firmly and pull straight out from the outlet.

Do not grasp the power cord or touch the appliance controls with wet hands. If water enters the product, turn off the power at the main circuit, then unplug the product and call for service. If the product has been submerged, contact an LG Electronics Customer Information Center for instructions before resuming use.

Unplug the product when unused for long periods. Unplug the product before cleaning. In the event of a gas leak (propane gas, etc.) do not operate this or any other appliance. Open a window or door to ventilate the area immediately.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.

Do not tamper with controls. The interior of the product must only be cleaned by an authorized service center or a dealer. Do not use solvent-based detergent on the product. Doing so can cause corrosion or damage, product failure, electrical shock, or fire.

COV34636802 2018. 4. 23. 5:11 4

EN G LIS

H

5

SAFETY INSTRUCTIONS

CAUTION

Operation

To reduce the risk of minor injury to persons, malfunction, or damage to the product or property when using this product, follow basic precautions, including the following:

This appliance is not intended for use as a precision refrigeration system. Do not use it for special purposes such as maintaining pets, food, precision machinery, or art objects.

Make sure the air inlet and outlet are free from obstructions. Use a soft cloth to clean the appliance. Do not use waxes, thinners, or harsh detergents. Do not step on or place heavy objects on top of the appliance. Do not operate the appliance without the filter securely installed. Clean the filter every two weeks. Do not drink water drained from the appliance. If the batteries leak onto your clothes or skin, remove contaminated clothing and rinse skin thoroughly with soap and water. Do not use the remote if the battery has leaked.

If the battery or the liquid inside it are ingested, do not induce vomiting or give food or drink. Contact a physician immediately.

COV34636802 2018. 4. 23. 5:11 5

6

SAFETY INSTRUCTIONS

ELECTRICAL SAFETY

Do not use an adapter with this appliance.

COV34636802 2018. 4. 23. 5:11 6

EN G LIS

H

7

temperature, and

using the bottom drain port.

COV34636802 2018. 4. 23. 5:11 7

8

BEFORE USING THE AIR CONDITIONER

Doing so

are they do

place the appliance near

COV34636802 2018. 4. 23. 5:11 8

EN G LIS

H

9

BEFORE USING THE AIR CONDITIONER

the

Press and slide to remove the battery cover on the back of the remote.

If the batteries leak onto your clothes or skin, remove contaminated clothing and rinse skin thoroughly with soap and water. Do not use the remote if the battery has leaked.

If the battery or the liquid inside it are ingested, do not induce vomiting or give food or drink. Contact a physician immediately.

COV34636802 2018. 4. 23. 5:11 9

10

Operation of functions is the same when using the remote or the control panel, unless otherwise stated. The remote and the control panel are not in sync. For best results when using the remote, remember to check that all desired settings are correct on the remote as well as on the control panel. NOTE: The remote sensor is located on the front panel of the air conditioner. Point the remote from anywhere at the sensor. The remote may not work if the sensor is in bright light or if there is not a clear path between the remote and the sensor. Some functions may not be supported, depending on the model.

Turns the air conditioner on and off. A chime sounds to confirm you have turned it on or off.

Press this button repeatedly to toggle through and select the operating mode. Modes include Cool, Dry (dehumidi- fy), Fan, and Heat. An LED illuminates to indicate the selected mode. The default mode is Cool. See the Operation section for more information.

NOTE: Press and hold the Mode button on the remote for 3 seconds to switch the temperature display from degrees Celsius (C) to degrees Fahrenheit (F).

Press repeatedly to toggle the fan speed between High and Low settings. An LED illuminates to indicate the selected fan speed. The fan speed can be changed in the Cool, Fan, and Heat modes. The fan speed is preset in the Dry mode. After pressing the button, there is a brief delay before the fan motor changes speed.

Use the timer function to set the air conditioner to turn on or off at a desired time. The timer function can only be set using the remote. See the Operation section for more information.

COV34636802 2018. 4. 23. 5:11 10

EN G LIS

H

11

one-degree

one-hour increments.

runs the compressor until cycles the compressor

SLEEP mode can be used with any of the four modes. This function gives you a more comfortable environment for sleep. The appliance will stop operation automatically after operating for 8 hours. The fan speed is automatically set to Low. This function can only be activated from the remote.

Sets the air discharge louvers to open and shut, circulating the air more effectively through the room. This function can only be set from the remote. If the louvers do not move properly, unplug and plug in the power cord.

LED display shows the set temperature, fan speed, or the selected TIMER delay. LEDs illuminate to indicate the active Mode, fan speed, and other settings. An E5 error code displays when the water drain tank needs to be emptied.

If you use the Heat mode, you must install the drain hose. (See pages 21-22 for more information.) If only the Cool mode is used, the drain hose is not needed.

DRAIN PUMP (Optional)

COV34636802 2018. 4. 23. 5:11 11

12

HOW TO USE

OPERATION

MODES

COOL( ) Compressor runs and cools the room. Use the and FAN buttons to set the desired temperature and fan speed. The desired temperature can be set from 60F to 86F (16C to 30C) in one-degree increments.

FAN( ) Fan circulates air but compressor does not run. Use the FAN button to set the desired fan speed to either High or Low.

DRY( ) Use the Dry mode to remove humidity from the room without additional cooling. The fan speed is preset and cannot be adjusted.

NOTE: After 3 minutes in Dry mode, the target temperature is automatically set to 4F (2C) below the current room temperature. If desired, the temperature differential can be manually set by using the / buttons, within a range of -4F (-2C) less to 4F (2C) more than the room temperature.

HEAT( ) (Optional) Compressor runs and heats the room. Use the and FAN buttons to set the desired temperature and fan speed. The desired temperature can be set from 60F to 86F (16C to 30C) in one-degree increments.

TIMER Use the Timer function to turn the air conditioner ON/OFF automatically.

Setting the Air Conditioner to Turn ON 1. Plug in the air conditioner and use the remote to

power it ON. 2. Use the remote to set the desired mode,

temperature, fan speed, etc. 3. Use the remote to power OFF the air conditioner. 4. Press TIMER on the remote and use the

buttons to set the desired delay time until the air conditioner turns ON. The delay time can be set from 0 to 24 hours in one-hour increments.

5. Press TIMER again to enter the delay time. The TIMER LED on the air conditioner illuminates, and the delay time appears on the remote and in the control panel.

6. To cancel the Timer function, press TIMER on the remote.

Setting the Air Conditioner to Turn OFF 1. Plug in the air conditioner and use the remote to

power it ON. 2. Use the remote to set the desired mode,

temperature, fan speed, etc. 3. Press TIMER on the remote and use the

buttons to set the desired delay time until the air conditioner turns OFF. The delay time can be set from 0 to 24 hours in one-hour increments.

4. Press TIMER again to enter the delay time. The TIMER LED on the air conditioner illuminates, and the delay time appears on the remote. The delay time appears briefly in the control panel and is then replaced by the set temperature.

5. To cancel the Timer function, press TIMER on the remote.

Display -2 -1 -- 1 2

Temp. -4F -2F 0F 2F 4F

Diff. -2C -1C 0C 1C 2C

COV34636802 2018. 4. 23. 5:11 12

EN G LIS

H

13

SMART FUNCTIONS

Using Smart ThinQ Application (on some models)

COV34636802 2018. 4. 23. 5:11 13

14

SMART FUNCTIONS

Using Smart ThinQ Application (on some models)

Wi-Fi Function

For appliances with the logo Communicate with the appliance from a smart phone using the convenient smart features.

Using the Application

1 Select the appliance in the application and connect it to a Wi-Fi network.

2 Select the menu on the upper right side to access settings and features.

Firmware Update Keep the appliance performance updated.

Settings Allows you to set various options on the appliance and in the application.

Open Source Software Notice Information To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com. This offer is valid for three (3) years from the date on which you purchased the product.

Installing LG SmartThinQ Search for the LG SmartThinQ application from the Google Play Store or Apple App Store on a smart phone. Follow instructions to download and install the application. NOTE

If you choose the simple login to access the LG SmartThinQ application, you must go through the appliance registration process each time you change your smartphone or reinstall the application.

Product Registration

1 Run the LG SmartThinQ application on a smart phone.

2 Create an account and sign in.

3 Select Register.

4 Select Air conditioner.

5 Follow the instruction on the smart phone.

NOTE

If you change your wireless router, your Internet service provider or your password after registering the appliance, please delete it from the LG SmartThinQ Settings Edit Product and register again.

The application is subject to change for appliance improvement purposes without notice to users.

Functions may vary by model.

COV34636802 2018. 4. 23. 5:11 14

EN G LIS

H

15

Lock Nut (Optional)

Drain Pipe (Optional)

Flexible Vent Hose DiffuserMounting Bracket

COV34636802 2018. 4. 23. 5:11 15

16

Assembling the Mounting Bracket, Diffuser, and Vent Hose

1. Use a pliers to extend the first four or five accordioned folds at both ends of the vent hose.

2. To attach the mounting bracket to one end of the vent hose, insert the extended folds on one side of the vent hose between the ridges inside one side of the mounting bracket.

3. Use a pliers to pull the folds on the opposite side of the vent hose up and between the ridges inside the opposite side of the mounting bracket.

4. Tug the mounting bracket to make sure it is securely attached to the vent hose.

5. To attach the diffuser to the other end of the vent hose, use a Phillips screwdriver to remove the four screws holding the grill on the end of the diffuser. Set the grill and screws aside.

6. Insert the vent hose in the round end of the diffuser in the same manner as assembling the hose to the mounting bracket. (See steps 2 and 3.)

7. Tug the diffuser to make sure it is securely attached to the vent hose.

8. Reattach the grill on the diffuser, using the four screws removed in step 5.

Attach the hose assembly onto the back of the air conditioner by inserting the edges of the mounting bracket behind the tabs at the top and bottom and sliding the mounting bracket to the left until it snaps into place.

COV34636802 2018. 4. 23. 5:11 16

EN G LIS

H

17

INSTALLATION INSTRUCTIONS

WINDOW VENT PANEL AND EXTENSIONS The window installation kit allows you to install the air conditioner in most vertical-sliding windows 18 to 50 wide, or horizontal-sliding windows from 18 to 50 high.

1. Select the panels required based on the window opening, as shown above.

2. If the installation requires 2 or 3 panels, assemble the panels to the proper length and fix them in place with 1 type A screw.

For window openings from 19 to 26, use the window vent panel (Panel A) and an extension panel (Panel B).

For window openings from 27 to 34, use the window vent panel (Panel A) and an extension panel (Panel C).

Window opening

Fig. a Fig. b

Fig. c Fig. d

COV34636802 2018. 4. 23. 5:11 17

18

INSTALLATION INSTRUCTIONS

INSTALLATION IN VERTICAL-SLIDING WINDOWS NOTE : The window installation kit can be used with vertical-sliding windows between 18 and 50 wide.

Cut the foam seal A (adhesive type) & C (adhesive type-shorter) to the proper length, and attach them to the window sash and frame.

Install the security bracket with a type B screw as shown, it desired.

COV34636802 2018. 4. 23. 5:11 18

EN G LIS

H

19

INSTALLATION INSTRUCTIONS

INSTALLATION IN VERTICAL-SLIDING WINDOWS

Insert the diffuser into the opening in the vent panel and slide it to lock it into place.

Align the tabs on the diffuser with the slots in the vent panel. Insert the diffuser into the opening in the vent panel and slide the diffuser to lock the tabs in place.

Insert the type C screw in the hole in the diffuser to prevent the diffuser from sliding out of the vent opening.

Slot

(1) Insert

(2) Slide

COV34636802 2018. 4. 23. 5:11 19

20

INSTALLATION INSTRUCTIONS

INSTALLATION IN HORIZONTAL-SLIDING WINDOWS NOTE : The window installation kit can be used with horizontal-sliding windows between 18 and 50 tall.

Cut the foam seal A (adhesive type) & C (adhesive type-shorter) to the proper length, and attach them to the window sash and frame.

COV34636802 2018. 4. 23. 5:11 20

EN G LIS

H

21

INSTALLATION IN HORIZONTAL-SLIDING WIDOWS

INSTALLATION INSTRUCTIONS

Insert the diffuser into the opening in the vent panel and slide it to lock it into place.

Align the tabs on the diffuser with the slots in the vent panel. Insert the diffuser into the opening in the vent panel and slide the diffuser to lock the tabs in place.

Insert the type C screw in the hole in the diffuser to prevent the diffuser from sliding out of the vent opening.

COV34636802 2018. 4. 23. 5:11 21

22

INSTALLATION INSTRUCTIONS

HEATING DRAINAGE (Optional)

If you use the Heat mode, you must install the drain hose. If only the Cool mode is used, the drain hose is not needed.

If the outside temperature is at or near freezing (32F/0C) follow the indoor drainage instruc- tions.

If using the outdoor drainage method, make sure the outlet of the hose is aimed away from nearby surfaces that could be stained or damaged by the draining water.

INDOOR DRAINAGE 1. To attach the drain hose, insert the connector into the upper drain port at the back of the unit

until it snaps into place. 2. Place the other end of the drain hose in a bucket that holds at least 28 ounces. Remember to

check and empty the bucket frequently to avoid overflows. 3. Set the unit to automatic drain by pressing the Fan and Down buttons at the same time. 4. To detach the drain hose, push the outer ring of the upper drain port in and pull the connector

out.

COV34636802 2018. 4. 23. 5:11 22

EN G LIS

H

23

HEATING DRAINAGE (Optional)

INSTALLATION INSTRUCTIONS

OUTDOOR DRAINAGE When the weather is above freezing, the unit can be set up to drain to the outside. Make sure the outlet of the hose is aimed away from nearby surfaces that could be stained or damaged by the draining water.

1. To attach the drain hose, insert the connector into the upper drain port at the back of the unit until it snaps into place.

2. Rotate the nut cover on the window vent panel and insert the other end of the drain hose through the hole in the window vent panel.

3. Make sure to insert the drain hose at least 8 inches. 4. Rotate the nut cover back to secure the drain hose in place. 5. Set the unit to automatic drain by pressing the Fan and Down buttons at the same time. 6. To detach the drain hose from the product, push the outer ring of the upper drain port in and

pull the connector out.

Inserting the drain hose in the unit will automatically activate the drain function. To activate the drain manually, press the Fan and Down buttons at the same time.

COV34636802 2018. 4. 23. 5:11 23

24

CARE AND CLEANING

EMPTYING THE WATER COLLECTION TANK

improves saves

This can be used when you need dehumidification in high humidity. The upper drain port is not used in the Cool or Fan mode. Remove the drain plug when using the Dry (dehumidifying) mode. Install a drain hose (16mm [5/8] inside diameter) and place the open end of the hose over a drain or

bucket or out the window.

Using the Lower Drain Port

If the E5 error appears in the display: The water collection tank is full. Unplug the air conditioner, drain the tank, then plug the air conditioner back in and restart it.

NOTE: After the air conditioner is unplugged, it defaults to the Cool mode with a temperature setting of 75F (24C) once restarted.

COV34636802 2018. 4. 23. 5:11 24

EN G LIS

H

25

CARE AND CLEANING

CLEANING THE CASE

CLEANING THE AIR FILTER

filters

each

filters

filters.

Use a vacuum cleaner to clean the filters. If the filters are heavily soiled, they can be washed in warm water using a mild detergent.

COV34636802 2018. 4. 23. 5:11 25

26

CARE AND CLEANING

STORING THE AIR CONDITIONER

Remove and clean the filters, allow them to dry completely, then reinstall them.

Make sure the filters and drain cap are in place

extended period of time:

COV34636802 2018. 4. 23. 5:11 26

EN G LIS

H

27

TROUBLESHOOTING

BEFORE CALLING FOR SERVICE

Problem Possible causes

unplug the unit.

room temperature

mode, button.

The air filters are dirty. filters

Corrective Action

COV34636802 2018. 4. 23. 5:11 27

28

TROUBLESHOOTING

BEFORE CALLING FOR SERVICE

Error Code Corrective ActionPossible causes

Software problem.

Problem Corrective ActionPossible causes

Your home appliance and smartphone is not connected to the Wi-Fi network.

The password for the Wi-Fi that you are trying to connect to is incorrect.

Find the Wi-Fi network connected to your smartphone and remove it, then register your appliance on LG SmartThinQ.

Mobile data for your smartphone is turned on.

Find the Wi-Fi network connected to your smartphone and remove it, then register your appliance on LG SmartThinQ.

The wireless network name (SSID) is set incorrectly.

The wireless network name (SSID) should be a combination of English letters and numbers. (Do not use special characters.)

The router frequency is not 2.4 GHz.

Only a 2.4 GHz router frequency is supported. Set the wireless router to 2.4 GHz and connect the appliance to the wireless router. To check the router frequency, check with your Internet service provider or the router manufacturer.

The distance between the appliance and the router is too far.

If the distance between the appliance and the router is too far, the signal may be weak and the connection may not be configured correctly. Move the location of the router so that it is closer to the appliance.

NOTE Some functions may not be supported, depending on the model.

COV34636802 2018. 4. 23. 5:11 28

EN G LIS

H

29

COV34636802 2018. 4. 23. 5:11 29

30

WARRANTY

ARBITRATION NOTICE: THIS LIMITED WARRANTY CONTAINS AN ARBITRATION PROVISION THAT REQUIRES YOU AND LG TO RESOLVE DISPUTES BY BINDING ARBITRATION INSTEAD OF IN COURT, UNLESS YOU CHOOSE TO OPT OUT. IN ARBITRATION, CLASS ACTIONS AND JURY TRIALS ARE NOT PERMITTED. PLEASE SEE THE SECTION TITLED PROCEDURE FOR RESOLVING DISPUTES BELOW.

PROCEDURE FOR RESOLVING DISPUTES:

ALL DISPUTES BETWEEN YOU AND LG ARISING OUT OF OR RELATING IN ANY WAY TO THIS LIMITED WARRANTY OR THE PROD- UCT SHALL BE RESOLVED EXCLUSIVELY THROUGH BINDING ARBITRATION, AND NOT IN A COURT OF GENERAL JURISDICTION. BINDING ARBITRATION MEANS THAT YOU AND LG ARE EACH WAIVING THE RIGHT TO A JURY TRIAL AND TO BRING OR PARTICI- PATE IN A CLASS ACTION.

Definitions. For the purposes of this section, references to LG mean LG Electronics U.S.A., Inc., its parents, subsidiaries and affiliates, and each of their officers, directors, employees, agents, beneficiaries, predecessors in interest, successors, assigns and suppliers; references to dispute or claim shall include any dispute, claim or controversy of any kind whatsoever (whether based in contract, tort, statute, regulation, ordinance, fraud, misrepresentation or any other legal or equitable theory) arising out of or relating in any way to the sale, condition or performance of the product or this Limited Warranty.

Notice of Dispute. In the event you intend to commence an arbitration proceeding, you must first notify LG in writing at least 30 days in advance of initiating the arbi- tration by sending a letter to LG at LG Electronics, USA, Inc. Attn: Legal Department- Arbitration 1000 Sylvan Ave, Englewood Cliffs 07632. You and LG agree to engage in good faith discussions in an attempt to amicably resolve your claim. The notice must provide your name, address, and telephone number; identify the prod- uct that is the subject of the claim; and describe the nature of the claim and the relief being sought. If you and LG are unable to resolve the dispute within 30 days, either party may proceed to file a claim for arbitration.

Agreement to Binding Arbitration and Class Action Waiver. Upon failure to resolve the dispute during the 30 day period after sending written notice to LG, you and LG agree to resolve any claims between us only by binding arbitration on an individual basis, unless you opt out as provided below. Any dispute between you and LG shall not be combined or consolidated with a dispute involving any other persons or entitys product or claim. More specifically, without limitation of the foregoing, any dispute between you and LG shall not under any circumstances proceed as part of a class or representative action. Instead of arbitration, either party may bring an individual action in small claims court, but that small claims court action may not be brought on a class or representative basis.

Arbitration Rules and Procedures. To begin arbitration of a claim, either you or LG must make a written demand for arbitration. The arbitration will be administered by the American Arbitration Association (AAA) and will be conducted before a single arbitrator under the AAAs Consumer Arbitration Rules that are in effect at the time the arbitration is initiated (referred to as the AAA Rules) and under the procedures set forth in this section. The AAA Rules are available online at www.adr.org/consumer. Send a copy of your written demand for arbitration, as well as a copy of this provision, to the AAA in the manner described in the AAA Rules. You must also send a copy of your written demand to LG at LG Electronics, USA, Inc. Attn: Legal Department- Arbitration 1000 Sylvan Avenue Englewood Cliffs, NJ 07632. If there is a conflict between the AAA Rules and the rules set forth in this section, the rules set forth in this section will govern. This arbitration provision is gov- erned by the Federal Arbitration Act. Judgment may be entered on the arbitrators award in any court of competent jurisdiction. All issues are for the arbitrator to decide, except that issues relating to the scope and enforceability of the arbitration provision and to the arbitrability of the dispute are for the court to decide. The arbi- trator is bound by the terms of this provision.

Governing Law. The law of the state of your residence shall govern this Limited Warranty and any disputes between us except to the extent that such law is preempt- ed by or inconsistent with applicable federal law.

Fees/Costs. You do not need to pay any fee to begin an arbitration. Upon receipt of your written demand for arbitration, LG will promptly pay all arbitration filing fees to the AAA unless you seek more than $25,000 in damages, in which case the payment of these fees will be governed by the AAA Rules. Except as otherwise provid- ed for herein, LG will pay all AAA filing, administration and arbitrator fees for any arbitration initiated in accordance with the AAA Rules and this arbitration provision. If you prevail in the arbitration, LG will pay your attorneys fees and expenses as long as they are reasonable, by considering factors including, but not limited to, the purchase amount and claim amount. Notwithstanding the foregoing, if applicable law allows for an award of reasonable attorneys fees and expenses, an arbitrator can award them to the same extent that a court would. If the arbitrator finds either the substance of your claim or the relief sought in the demand is frivolous or brought for an improper purpose (as measured by the standards set forth in Federal Rule of Civil Procedure 11(b)), then the payment of all arbitration fees will be governed by the AAA Rules. In such a situation, you agree to reimburse LG for all monies previously disbursed by it that are otherwise your obligation to pay under the AAA Rules. Except as otherwise provided for, LG waives any rights it may have to seek attorneys fees and expenses from you if LG prevails in the arbitration.

Hearings and Location. If your claim is for $25,000 or less, you may choose to have the arbitration conducted solely on the basis of (1) documents submitted to the arbitrator, (2) through a telephonic hearing, or (3) by an in-person hearing as established by the AAA Rules. If your claim exceeds $25,000, the right to a hearing will be determined by the AAA Rules. Any in-person arbitration hearings will be held at a location within the federal judicial district in which you reside unless we both agree to another location or we agree to a telephonic arbitration.

Opt Out. You may opt out of this dispute resolution procedure. If you opt out, neither you nor LG can require the other to participate in an arbitration proceeding. To opt out, you must send notice to LG no later than 30 calendar days from the date of the first consumer purchasers purchase of the product by either: (i) sending an e- mail to optout@lge.com, with the subject line: Arbitration Opt Out or (ii) calling 1-800-980-2973. You must include in the opt out e-mail or provide by telephone: (a) your name and address; (b) the date on which the product was purchased; (c) the product model name or model number; and (d) the serial number (the serial number can be found (i) on the product; or (ii) online by accessing https://www.lg.com/us/support/repair-service/schedule-repair-continued and clicking on Find My Model & Serial Number).

You may only opt out of the dispute resolution procedure in the manner described above (that is, by e-mail or telephone); no other form of notice will be effective to opt out of this dispute resolution procedure. Opting out of this dispute resolution procedure will not affect the coverage of the Limited Warranty in any way, and you will continue to enjoy the full benefits of the Limited Warranty. If you keep this product and do not opt out, then you accept all terms and conditions of the arbitration provi- sion described above.

COV34636802 2018. 4. 23. 5:11 30

EN G LIS

H

31

Memo

COV34636802 2018. 4. 23. 5:11 31

COV34636802 2018. 4. 23. 5:11 62