- Manuals
- Brands
- Lenovo
- Laptop
- ThinkPad X1 Carbon Gen 1
- User Guide
Lenovo ThinkPad X1 Carbon Gen 1 Laptop User Guide PDF
Summary of Content for Lenovo ThinkPad X1 Carbon Gen 1 Laptop User Guide PDF
User Guide
ThinkPad X1 Carbon
Notes: Before using this information and the product it supports, be sure to read and understand the following:
Safety, Warranty, and Setup Guide
Regulatory Notice
Important safety information on page vi
Appendix D Notices on page 121
The Safety, Warranty, and Setup Guide and the Regulatory Notice have been uploaded to the Web site. To refer to them, go to http://www.lenovo.com/ThinkPadUserGuides.
Fifth Edition (January 2014)
Copyright Lenovo 2012, 2014.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant a General Services Administration GSA contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925.
Contents
Read this first . . . . . . . . . . . . . . v Important safety information . . . . . . . . . . vi
Conditions that require immediate action . . vii Safety guidelines . . . . . . . . . . . . vii
Chapter 1. Product overview . . . . . . 1 Locating computer controls, connectors, and indicators. . . . . . . . . . . . . . . . . . 1
Front view. . . . . . . . . . . . . . . . 1 Rear view . . . . . . . . . . . . . . . . 3 Right-side view. . . . . . . . . . . . . . 3 Left-side view . . . . . . . . . . . . . . 5 Bottom view . . . . . . . . . . . . . . . 6 Status indicators . . . . . . . . . . . . . 6
Locating important product information . . . . . . 9 Machine type and model label . . . . . . . . 9 FCC ID and IC Certification number label . . . 9 Certificate of Authenticity label . . . . . . . 9
Features . . . . . . . . . . . . . . . . . 10 Specifications . . . . . . . . . . . . . . . 11 Operating environment . . . . . . . . . . . 11 Lenovo programs . . . . . . . . . . . . . 12
Accessing Lenovo programs on the Windows 7 operating system . . . . . . . . . . . 12 Accessing Lenovo programs on the Windows 8 operating system . . . . . . . . . . . 14 An introduction to Lenovo programs . . . . 14
Chapter 2. Using your computer . . . 17 Registering your computer . . . . . . . . . . 17 Frequently asked questions . . . . . . . . . 17 Special keys and buttons . . . . . . . . . . 19
Function key combinations . . . . . . . . 19 Volume and mute buttons . . . . . . . . 20 Windows key . . . . . . . . . . . . . 21
Using the multi-touch screen . . . . . . . . . 22 Using the UltraNav pointing device. . . . . . . 23
Using the TrackPoint pointing device . . . . 23 Using the touch pad. . . . . . . . . . . 25 Disabling the UltraNav pointing device and using an external mouse . . . . . . . . . 26 Adding the UltraNav icon to the Windows notification area . . . . . . . . . . . . 26
Power management . . . . . . . . . . . . 27 Checking the battery status . . . . . . . . 27 Using the ac power adapter. . . . . . . . 27 Charging the battery . . . . . . . . . . 28 Disabling the built-in battery . . . . . . . 28
Maximizing the battery life . . . . . . . . 28 Managing the battery power . . . . . . . 28 Power-saving modes . . . . . . . . . . 29
Connecting to the network . . . . . . . . . . 30 Ethernet connections . . . . . . . . . . 30 Wireless connections . . . . . . . . . . 30
Presentations and multimedia. . . . . . . . . 34 Changing display settings . . . . . . . . 34 Connecting a projector or an external monitor . . . . . . . . . . . . . . . . 34 Using dual displays . . . . . . . . . . . 36
Using audio features . . . . . . . . . . . . 37 Using the camera . . . . . . . . . . . . . 38 Using a flash media card. . . . . . . . . . . 38
Chapter 3. You and your computer . . 41 Accessibility and comfort . . . . . . . . . . 41
Ergonomic information. . . . . . . . . . 41 Comfort . . . . . . . . . . . . . . . 42 Accessibility information . . . . . . . . . 42
Traveling with your computer . . . . . . . . . 43 Travel tips . . . . . . . . . . . . . . . 43 Travel accessories . . . . . . . . . . . 43
Chapter 4. Security . . . . . . . . . . 45 Attaching a mechanical lock . . . . . . . . . 45 Using passwords. . . . . . . . . . . . . . 45
Passwords and sleep mode. . . . . . . . 45 Typing passwords . . . . . . . . . . . 45 Power-on password . . . . . . . . . . . 46 Hard disk passwords . . . . . . . . . . 46 Supervisor password . . . . . . . . . . 48
Solid-state drive security. . . . . . . . . . . 50 Setting the security chip . . . . . . . . . . . 50 Using a fingerprint reader . . . . . . . . . . 51 Notice on deleting data from your solid-state drive. . . . . . . . . . . . . . . . . . . 55 Using firewalls . . . . . . . . . . . . . . . 56 Protecting data against viruses . . . . . . . . 56
Chapter 5. Recovery overview . . . . 57 Recovery overview for Windows 7 models . . . . 57
Creating and using recovery media . . . . . 57 Performing backup and recovery operations . 58 Using the Rescue and Recovery workspace . 59 Creating and using a rescue medium . . . . 60
Copyright Lenovo 2012 i
Reinstalling preinstalled applications and device drivers . . . . . . . . . . . . . 61 Solving recovery problems . . . . . . . . 62
Recovery overview for Windows 8 models . . . . 62 Recovery solutions for Windows 8 models . . 62
Chapter 6. Advanced configuration . . 65 Installing a new operating system . . . . . . . 65
Before you begin . . . . . . . . . . . . 65 Installing the Windows 7 operating system . . 66 Installing the Windows 8 operating system . . 67
Installing device drivers . . . . . . . . . . . 67 Installing the driver for the 4-in-1 media card reader . . . . . . . . . . . . . . . . 67 Installing the driver for USB 3.0 on the Windows 7 operating system . . . . . . . 67 Installing the ThinkPad monitor file for Windows 2000/XP/Vista/7/8 on the Windows 7 operating system . . . . . . . . . . . 68 Installing other device drivers and software on the Windows 7 operating system. . . . . . 68
ThinkPad Setup . . . . . . . . . . . . . . 68 Main menu . . . . . . . . . . . . . . 69 Config menu. . . . . . . . . . . . . . 70 Date/Time menu . . . . . . . . . . . . 76 Security menu . . . . . . . . . . . . . 76 Startup menu . . . . . . . . . . . . . 81 Restart menu . . . . . . . . . . . . . 83 Updating your system UEFI BIOS . . . . . 84
Using system management. . . . . . . . . . 84 System management . . . . . . . . . . 84
Chapter 7. Preventing problems . . . 85 General tips for preventing problems . . . . . . 85 Making sure device drivers are current . . . . . 86 Taking care of your computer . . . . . . . . . 86
Cleaning the cover of your computer . . . . 88
Chapter 8. Troubleshooting computer problems . . . . . . . . . . . . . . . 89 Diagnosing problems . . . . . . . . . . . . 89 Troubleshooting . . . . . . . . . . . . . . 89
Computer stops responding . . . . . . . 89 Spills on the keyboard . . . . . . . . . . 90 Error messages . . . . . . . . . . . . 90 Errors without messages . . . . . . . . . 92 Beep errors . . . . . . . . . . . . . . 93 Memory module problems . . . . . . . . 93 Networking problems . . . . . . . . . . 93 Problems with the keyboard and other pointing devices . . . . . . . . . . . . . . . . 95
Problems with the display and multimedia devices . . . . . . . . . . . . . . . . 96 Fingerprint reader problems. . . . . . . . 100 Battery and power problems . . . . . . . 100 Solid-state drive problems . . . . . . . . 103 Software problems . . . . . . . . . . . 103 USB problems . . . . . . . . . . . . . 103
Chapter 9. Getting support . . . . . 105 Before you contact Lenovo . . . . . . . . . . 105 Getting help and service . . . . . . . . . . . 105
Using diagnostic programs . . . . . . . . 106 Lenovo Support Web site. . . . . . . . . 106 Calling Lenovo . . . . . . . . . . . . . 106 Finding ThinkPad options . . . . . . . . 107
Purchasing additional services . . . . . . . . 107
Appendix A. Regulatory information . . . . . . . . . . . . . 109 Wireless related information . . . . . . . . . 109
Location of the UltraConnect wireless antennas . . . . . . . . . . . . . . . 110 Locating wireless regulatory notices . . . . 111
Export classification notice . . . . . . . . . . 111 Electronic emission notices. . . . . . . . . . 111
Federal Communications Commission Declaration of Conformity . . . . . . . . 111 Industry Canada Class B emission compliance statement . . . . . . . . . . . . . . . 111 European Union - Compliance to the Electromagnetic Compatibility Directive . . . 112 German Class B compliance statement . . . 112 Korea Class B compliance statement . . . . 113 Japan VCCI Class B compliance statement . . 113 Japan compliance statement for products which connect to the power mains with rated current less than or equal to 20 A per phase . . . . . . . . . . . . . . . . 113 Lenovo product service information for Taiwan . . . . . . . . . . . . . . . . 113
Appendix B.WEEE and recycling statements . . . . . . . . . . . . . 115 Important WEEE information . . . . . . . . . 115 Japan recycling statements . . . . . . . . . 115 Recycling information for Brazil . . . . . . . . 116 Battery recycling information for Taiwan. . . . . 116 Battery recycling information for the European Union . . . . . . . . . . . . . . . . . . 117 Battery recycling information for the United States and Canada. . . . . . . . . . . . . . . . 117
ii User Guide
Appendix C. ENERGY STAR model information . . . . . . . . . . . . . 119
Appendix D. Notices. . . . . . . . . 121 Trademarks . . . . . . . . . . . . . . . . 122
Appendix E. Restriction of Hazardous Substances Directive (RoHS) . . . . 123
China RoHS. . . . . . . . . . . . . . . . 123 Turkish RoHS . . . . . . . . . . . . . . . 123 Ukraine RoHS . . . . . . . . . . . . . . . 123 India RoHS . . . . . . . . . . . . . . . . 124
Copyright Lenovo 2012 iii
iv User Guide
Read this first
Be sure to follow the important tips given here to get the most use and enjoyment out of your computer. Failure to do so might lead to discomfort or injury, or cause your computer to fail.
Protect yourself from the heat that your computer generates.
When your computer is turned on or the battery is charging, the base, the palm rest, and some other parts may become hot. The temperature they reach depends on the amount of system activity and the level of charge in the battery.
Extended contact with your body, even through clothing, could cause discomfort or even a skin burn.
Avoid keeping your hands, your lap, or any other part of your body in contact with a hot section of the computer for any extended time.
Periodically take hands from using the keyboard by lifting your hands from the palm rest.
Protect yourself from the heat generated by the ac power adapter.
When the ac power adapter is connected to an electrical outlet and your computer, it generates heat.
Extended contact with your body, even through clothing, may cause a skin burn.
Do not place the ac power adapter in contact with any part of your body while it is in use.
Never use it to warm your body.
Prevent your computer from getting wet.
To avoid spills and the danger of electrical shock, keep liquids away from your computer.
Protect the cables from being damaged.
Applying strong force to cables may damage or break them.
Route communication lines, or the cables of an ac power adapter, a mouse, a keyboard, a printer, or any other electronic device, so that they cannot be walked on, tripped over, pinched by your computer or other objects, or in any way subjected to treatment that could interfere with the operation of your computer.
Copyright Lenovo 2012 v
Protect your computer and data when moving it.
Before moving a computer equipped with a hard disk drive, do one of the following, and make sure that the power switch is off or is blinking:
Turn it off.
Put it in sleep mode.
Put it in hibernation mode.
This will help to prevent damage to the computer, and possible loss of data.
Handle your computer gently.
Do not drop, bump, scratch, twist, hit, vibrate, push, or place heavy objects on your computer, display, or external devices.
Carry your computer carefully.
Use a quality carrying case that provides adequate cushioning and protection.
Do not pack your computer in a tightly packed suitcase or bag.
Before putting your computer in a carrying case, ensure that it is off, in sleep mode, or in hibernation mode. Do not put a computer in a carrying case while it is turned on.
Important safety information Note: Read the important safety information first.
This information can help you safely use your notebook computer. Follow and retain all information included with your computer. The information in this document does not alter the terms of your purchase agreement or the Lenovo Limited Warranty. For more information, see Warranty Information in the Safety, Warranty, and Setup Guide that comes with your computer.
Customer safety is important. Our products are developed to be safe and effective. However, personal computers are electronic devices. Power cords, power adapters, and other features can create potential safety risks that can result in physical injury or property damage, especially if misused. To reduce these risks, follow the instructions included with your product, observe all warnings on the product and in the operating instructions, and review the information included in this document carefully. By carefully following the information contained in this document and provided with your product, you can help protect yourself from hazards and create a safer computer work environment.
Note: This information includes references to power adapters and batteries. In addition to notebook computers, some products (such as speakers and monitors) ship with external power adapters. If you have such a product, this information applies to your product. In addition, computer products contain a coin-sized internal battery that provides power to the system clock even when the computer is unplugged, so the battery safety information applies to all computer products.
vi User Guide
Conditions that require immediate action Products can become damaged due to misuse or neglect. Some product damage is serious enough that the product should not be used again until it has been inspected and, if necessary, repaired by an authorized servicer.
As with any electronic device, pay close attention to the product when it is turned on. On very rare occasions, you might notice an odor or see a puff of smoke or sparks vent from your product. Or you might hear sounds like popping, cracking or hissing. These conditions might merely mean that an internal electronic component has failed in a safe and controlled manner. Or, they might indicate a potential safety issue. However, do not take risks or attempt to diagnose the situation yourself. Contact the Customer Support Center for further guidance. For a list of Service and Support phone numbers, see the following Web site: http://www.lenovo.com/support/phone
Frequently inspect your computer and its components for damage or wear or signs of danger. If you have any question about the condition of a component, do not use the product. Contact the Customer Support Center or the product manufacturer for instructions on how to inspect the product and have it repaired, if necessary.
In the unlikely event that you notice any of the following conditions, or if you have any safety concerns with your product, stop using the product and unplug it from the power source and telecommunication lines until you can speak to the Customer Support Center for further guidance.
Power cords, plugs, power adapters, extension cords, surge protectors, or power supplies that are cracked, broken, or damaged.
Signs of overheating, smoke, sparks, or fire.
Damage to a battery (such as cracks, dents, or creases), discharge from a battery, or a buildup of foreign substances on the battery.
A cracking, hissing or popping sound, or strong odor that comes from the product.
Signs that liquid has been spilled or an object has fallen onto the computer product, the power cord or power adapter.
The computer product, power cord, or power adapter has been exposed to water.
The product has been dropped or damaged in any way.
The product does not operate normally when you follow the operating instructions.
Note: If you notice these conditions with a product (such as an extension cord) that is not manufactured for or by Lenovo, stop using that product until you can contact the product manufacturer for further instructions, or until you get a suitable replacement.
Safety guidelines Always observe the following precautions to reduce the risk of injury and property damage.
Service and upgrades Do not attempt to service a product yourself unless instructed to do so by the Customer Support Center or your documentation. Only use a Service Provider who is approved to repair your particular product.
Note: Some computer parts can be upgraded or replaced by the customer. Upgrades typically are referred to as options. Replacement parts approved for customer installation are referred to as Customer Replaceable Units, or CRUs. Lenovo provides documentation with instructions when it is appropriate for customers to install options or replace CRUs. You must closely follow all instructions when installing or replacing parts. The Off state of a power indicator does not necessarily mean that voltage levels inside a product are zero. Before you remove the covers from a product equipped with a power cord, always ensure
Copyright Lenovo 2012 vii
that the power is turned off and that the product is unplugged from any power source. If you have any questions or concerns, contact the Customer Support Center.
Although there are no moving parts in your computer after the power cord has been disconnected, the following warnings are required for your safety.
CAUTION: Hazardous moving parts. Keep fingers and other body parts away.
CAUTION:
Before replacing any CRUs, turn off the computer and wait three to five minutes to let the computer cool before opening the cover.
Power cords and power adapters
DANGER
Use only the power cords and power adapters supplied by the product manufacturer.
The power cords shall be safety approved. For Germany, it shall be H05VV-F, 3G, 0.75 mm2, or better. For other countries, the suitable types shall be used accordingly.
Never wrap a power cord around a power adapter or other object. Doing so can stress the cord in ways that can cause the cord to fray, crack, or crimp. This can present a safety hazard.
Always route power cords so that they will not be walked on, tripped over, or pinched by objects.
Protect power cords and power adapters from liquids. For instance, do not leave your power cord or power adapter near sinks, tubs, toilets, or on floors that are cleaned with liquid cleansers. Liquids can cause a short circuit, particularly if the power cord or power adapter has been stressed by misuse. Liquids also can cause gradual corrosion of power cord terminals and/or the connector terminals on a power adapter, which can eventually result in overheating.
Ensure that all power cord connectors are securely and completely plugged into receptacles.
Do not use any power adapter that shows corrosion at the ac input pins or shows signs of overheating (such as deformed plastic) at the ac input pins or anywhere on the power adapter.
Do not use any power cords where the electrical contacts on either end show signs of corrosion or overheating or where the power cord appears to have been damaged in any way.
viii User Guide
To prevent possible overheating, do not cover the power adapter with clothing or other objects when the power adapter is plugged into an electrical outlet.
Extension cords and related devices Ensure that extension cords, surge protectors, uninterruptible power supplies, and power strips that you use are rated to handle the electrical requirements of the product. Never overload these devices. If power strips are used, the load should not exceed the power strip input rating. Consult an electrician for more information if you have questions about power loads, power requirements, and input ratings.
Plugs and outlets
DANGER
If a receptacle (power outlet) that you intend to use with your computer equipment appears to be damaged or corroded, do not use the outlet until it is replaced by a qualified electrician.
Do not bend or modify the plug. If the plug is damaged, contact the manufacturer to obtain a replacement.
Do not share an electrical outlet with other home or commercial appliances that draw large amounts of electricity; otherwise, unstable voltage might damage your computer, data, or attached devices.
Some products are equipped with a three-pronged plug. This plug fits only into a grounded electrical outlet. This is a safety feature. Do not defeat this safety feature by trying to insert it into a non-grounded outlet. If you cannot insert the plug into the outlet, contact an electrician for an approved outlet adapter or to replace the outlet with one that enables this safety feature. Never overload an electrical outlet. The overall system load should not exceed 80 percent of the branch circuit rating. Consult an electrician for more information if you have questions about power loads and branch circuit ratings.
Ensure that the power outlet you are using is properly wired, easily accessible, and located close to the equipment. Do not fully extend power cords in a way that will stress the cords.
Ensure that the power outlet provides the correct voltage and current for the product you are installing.
Carefully connect and disconnect the equipment from the electrical outlet.
Power supply statement
DANGER
Never remove the cover on a power supply or any part that has the following label attached.
Copyright Lenovo 2012 ix
Hazardous voltage, current, and energy levels are present inside any component that has this label attached. There are no serviceable parts inside these components. If you suspect a problem with one of these parts, contact a service technician.
External devices CAUTION: Do not connect or disconnect any external device cables other than USB while the computer power is on; otherwise, you might damage your computer. To avoid possible damage to attached devices, wait at least five seconds after the computer is shut down to disconnect external devices.
Notice for lithium coin cell battery
DANGER
Danger of explosion if battery is incorrectly replaced.
Do not:
Throw or immerse into water
Heat to more than 100C (212F)
Repair or disassemble
Dispose of the battery as required by local ordinances or regulations.
The following statement applies to users in the state of California, U.S.A.
California Perchlorate Information:
Products containing manganese dioxide lithium coin cell batteries may contain perchlorate.
Perchlorate Material - special handling may apply, See www.dtsc.ca.gov/hazardouswaste/perchlorate
Notice for built-in rechargeable batteries
DANGER
Do not attempt to replace the internal rechargeable lithium batteries. Contact Lenovo Support for factory replacement.
Heat and product ventilation
DANGER
Computers, ac power adapters, and many accessories can generate heat when turned on and when batteries are charging. Notebook computers can generate a significant amount of heat due to their compact size. Always follow these basic precautions:
When your computer is turned on or the battery is charging, the base, the palm rest, and some other parts may become hot. Avoid keeping your hands, your lap, or any other part of your body in contact with a hot section of the computer for any extended length of time. When you use the keyboard, avoid keeping your palms on the palm rest for a prolonged period of time.
x User Guide
Your computer generates some heat during normal operation. The amount of heat depends on the amount of system activity and the battery charge level. Extended contact with your body, even through clothing, could cause discomfort or even a skin burn. Periodically take breaks from using the keyboard by lifting your hands from the palm rest; and be careful not to use the keyboard for any extended length of time.
Do not operate your computer or charge the battery near flammable materials or in explosive environments.
Ventilation slots, fans and/or heat sinks are provided with the product for safety, comfort, and reliable operation. These features might inadvertently become blocked by placing the product on a bed, sofa, carpet, or other flexible surface. Never block, cover, or disable these features.
When the ac power adapter is connected to an electrical outlet and your computer, it generates heat. Do not place the adapter in contact with any part of your body while using it. Never use the ac power adapter to warm your body. Extended contact with your body, even through clothing, may cause a skin burn.
For your safety, always follow these basic precautions with your computer:
Keep the cover closed whenever the computer is plugged in.
Regularly inspect the outside of the computer for dust accumulation.
Remove dust from vents and any perforations in the bezel. More frequent cleanings might be required for computers in dusty or high-traffic areas.
Do not restrict or block any ventilation openings.
Do not operate your computer inside furniture, as this might increase the risk of overheating.
Airflow temperatures into the computer should not exceed 35C (95F).
Electrical current safety information
DANGER
Electric current from power, telephone, and communication cables is hazardous.
To avoid a shock hazard:
Do not use your computer during a lightning storm.
Do not connect or disconnect any cables or perform installation, maintenance, or reconfiguration of this product during an electrical storm.
Connect all power cords to a properly wired and grounded electrical outlet.
Connect to properly wired outlets any equipment that will be attached to this product.
Whenever possible, use one hand only to connect or disconnect signal cables.
Never turn on any equipment when there is evidence of fire, water, or structural damage.
Do not use you computer until all internal parts enclosures are fastened into place. Never use the computer when internal parts and circuits are exposed.
Copyright Lenovo 2012 xi
DANGER
Connect and disconnect cables as described in the following procedures when installing, moving, or opening covers on this product or attached devices.
To connect:
1. Turn everything OFF.
2. First, attach all cables to devices.
3. Attach signal cables to connectors.
4. Attach power cords to outlets.
5. Turn devices ON.
To disconnect:
1. Turn everything OFF.
2. First, remove power cords from outlets.
3. Remove signal cables from connectors.
4. Remove all cables from devices.
The power cord must be disconnected from the wall outlet or receptacle before installing all other electrical cables connected to the computer.
The power cord may be reconnected to the wall outlet or receptacle only after all other electrical cables have been connected to the computer.
Liquid crystal display (LCD) notice CAUTION: The LCD is made of glass, and rough handling or dropping the computer can cause the LCD to break. If the LCD breaks and the internal fluid gets into your eyes or on your hands, immediately wash the affected areas with water for at least 15 minutes; if any symptoms are present after washing, get medical care.
Note: For products with mercury-containing fluorescent lamps (for example, non-LED), the Liquid crystal display (LCD) contains mercury; dispose of according to local, state, or federal laws.
Using headphones or earphones CAUTION: Excessive sound pressure from earphones and headphones can cause hearing loss. Adjustment of the equalizer to maximum increases the earphone and headphone output voltage and the sound pressure level. Therefore, to protect your hearing, adjust the equalizer to an appropriate level.
Excessive use of headphones or earphones for a long period of time at high volume can be dangerous if the output of the headphone or earphone connectors do not comply with specifications of EN 50332-2. The headphone output connector of your computer complies with EN 50332-2 Sub clause 7. This specification limits the computers maximum wide band true RMS output voltage to 150 mV. To help protect against hearing loss, ensure that the headphones or earphones you use also comply with EN 50332-2 (Clause 7 limits) for a wide band characteristic voltage of 75 mV. Using headphones that do not comply with EN 50332-2 can be dangerous due to excessive sound pressure levels.
If your Lenovo computer came with headphones or earphones in the package, as a set, the combination of the headphones or earphones and the computer already complies with the specifications of EN 50332-1. If different headphones or earphones are used, ensure that they comply with EN 50332-1 (Clause 6.5 Limitation Values). Using headphones that do not comply with EN 50332-1 can be dangerous due to excessive sound pressure levels.
xii User Guide
Additional safety information
DANGER
Plastic bags can be dangerous. Keep plastic bags away from babies and children to avoid danger of suffocation.
Notice for users in the U.S.A.
Many personal computer products and accessories contain cords, cables or wires, such as power cords or cords to connect the accessory to a personal computer. If this product has such a cord, cable or wire, then the following warning applies:
WARNING: Handling the cord on this product or cords associated with accessories sold with this product will expose you to lead, a chemical known to the State of California to cause cancer, and birth defects or other reproductive harm. Wash hands after handling.
Save these instructions.
Copyright Lenovo 2012 xiii
xiv User Guide
Chapter 1. Product overview
This chapter provides information about the locations of connectors, locations of important product labels, computer features, specifications, operating environment, and preinstalled programs.
This chapter contains the following topics:
Locating computer controls, connectors, and indicators on page 1
Locating important product information on page 9
Features on page 10
Specifications on page 11
Operating environment on page 11
Lenovo programs on page 12
Locating computer controls, connectors, and indicators This section introduces the computer hardware features to give you the basic information you will need to start using the computer.
Front view Note: Your computer might have slight variations from the following illustration.
1 Camera 7 TrackPoint pointing stick
2 Microphones 8 TrackPoint buttons
3 Power button 9 Touch pad
4 Status indicators 10 Volume control buttons
5 Black button 11 Screen (multi-touch screen on some models)
6 Fingerprint reader
Copyright Lenovo 2012 1
1 Camera
Use the camera to take pictures or hold a video conference.
2 Microphones
The microphones capture sound and voice when used with an application program capable of handling audio.
3 Power button
Use the power button to turn on the computer.
To turn off the computer, use the Start menu shutdown option on the Windows 7 operating system. For the Windows 8 operating system, move the cursor to the bottom right corner of the screen to bring up the charms. Then click Settings Power Shut down.
If your computer stops responding and you cannot turn it off, press and hold the power button for four seconds or more. If the computer still is not responding, remove the ac power adapter and use the emergency reset hole to reset the computer. See Bottom view on page 6.
You also can program the power button so that by pressing the power button you can shut down the computer or put it into sleep or hibernation mode. To achieve this, you need to change your power plan settings. To access power plan settings, do the following:
For Windows 7: Start the Power Manager program and then click the Power Plan tab. For instructions on how to start the Power Manager program, see Accessing Lenovo programs on the Windows 7 operating system on page 12.
For Windows 8: Click the battery status icon from the Windows notification area and click More power options. Then click Choose what the power buttons do.
4 Status indicators
Your computer has several status indicators. For the detailed information about the location and meaning of each indicator, see Status indicators on page 6.
5 Black button
When the operating system is working normally, pressing the black button launches the SimpleTap program on the Windows 7 operating system or the Lenovo PC Device Experience program on the Windows 8 operating system.
On the Windows 7 operating system, you also can use the black button to interrupt the startup sequence of your computer to start the Rescue and Recovery workspace. To access the Rescue and Recovery workspace, turn on your computer and press the black button when the ThinkPad logo is displayed on the screen. For more information about the Rescue and Recovery Workspace, see Using the Rescue and Recovery workspace on page 59.
6 Fingerprint reader
Some models have a fingerprint reader. The fingerprint authentication technology enables you to use your fingerprint to start the computer, enter the ThinkPad Setup program, or enter the Windows operating system.
UltraNav pointing device
7 TrackPoint pointing stick 8 TrackPoint buttons 9 Touch pad
2 User Guide
The keyboard contains the Lenovo unique UltraNav pointing device. Pointing, selecting, and dragging are all part of a single process that you can perform without moving your fingers from a typing position.
10 Volume control buttons
The volume control buttons enable you to quickly adjust the sound volume, mute the speakers, or mute the microphones of your computer.
11 Screen (multi-touch screen on some models)
For more information, refer to Using the multi-touch screen on page 22.
Rear view
1 SIM card slot
If your computer has a wireless WAN feature, it might require a Subscriber Identification Module (SIM) card to establish wireless WAN connections. Depending on the country of delivery, the SIM card might be already installed in the SIM card slot.
Right-side view
1 4-in-1 media card reader slot 4 USB 3.0 connector
2 Combo audio jack 5 Security keyhole
3 Mini DisplayPort connector
1 4-in-1 media card reader slot
The 4-in-1 media card reader supports the following cards:
Secure Digital (SD) card
Chapter 1. Product overview 3
Secure Digital High-Capacity (SDHC) card
Secure Digital eXtended-Capacity (SDXC) card
MultiMediaCard (MMC)
For details, refer to Using a flash media card on page 38.
Note: Your computer does not support the Content Protection for Recordable Media (CPRM) feature for SD cards.
2 Combo audio jack
To listen to the sound from your computer, connect a headphone or a headset that has a 3.5 mm 4-pole plug to the combo audio jack.
Notes:
If you are using a headset with a function switch, for example, a headset for an iPhone mobile digital device, do not press this switch while using the headset. If you press it, the headset microphone will be disabled, and the microphones on the computer will be enabled instead.
The combo audio jack does not support a conventional microphone.
3 Mini DisplayPort connector
Use the Mini DisplayPort connector to connect your computer to a compatible projector, external monitor, or high-definition television.
Your computer might come with a Mini DisplayPort to VGA adapter. Use the adapter to connect your computer to a compatible digital audio device or video monitor such as a high-definition television.
4 USB 3.0 connector
The Universal Serial Bus (USB) 3.0 connector is used for connecting devices compatible with a USB interface, such as a USB printer or a digital camera.
Note: When you attach a USB cable to the connector, ensure that the USB mark is facing upward. Otherwise the connector might be damaged.
5 Security keyhole
Purchase a security cable lock that fits this keyhole to lock your computer to a stationary object to protect your computer from theft.
4 User Guide
Left-side view
1 ac power connector 3 Always On USB connector
2 Fan louvers 4 Wireless radio switch
1 ac power connector
Connect the ac power adapter to the ac power connector to provide ac power to the computer and charge the battery.
2 Fan louvers
The internal fan and louvers enable air to circulate in the computer and cool the central processor.
Note: To avoid impeding airflow, do not place any obstacle in front of the fan.
3 Always On USB connector
By default, the Always On USB connector enables you to charge some mobile digital devices and smartphones when your computer is in sleep or hibernation mode.
If you want to charge these devices when your computer is turned off, do the following:
1. Connect the computer to an ac power supply.
2. Go to ThinkPad Setup and enable Always On USB Charge in off mode. For more information, see Config menu on page 70.
3. Do one of the following:
For Windows 7: Start the Power Manager program and click the Global Power Settings tab. Then select the Enable Always On USB check box.
For Windows 8: Press the Windows key to go to the Start screen. Click Lenovo Settings Power. Then select the Enable when the computer is off check box.
4 Wireless radio switch
Use this switch to quickly turn on or turn off all wireless connections.
Chapter 1. Product overview 5
Bottom view
1 Emergency reset hole 2 Speakers
1 Emergency reset hole
If your computer stops responding and you cannot turn it off by pressing the power button, remove the ac power adapter and reset the computer by inserting a needle or a straightened paper clip into the emergency reset hole to turn off the computer.
2 Speakers
For details, refer to Volume and mute buttons on page 20.
Status indicators The status indicators show the current status of your computer.
System status indicators Your computer has system status indicators. The following illustrations show the location and the meaning of each indicator.
Note: Your computer might have slight variations from the following illustrations.
6 User Guide
1 Speaker mute indicator
When the indicator is on in red, the speaker mute mode is enabled.
2 Microphone mute indicator
When the indicator is on in red, the microphone mute mode is enabled.
3 Wireless LAN/WAN/Bluetooth status indicator
Green: The wireless LAN, WAN, Bluetooth feature is on.
Off: Wireless network devices are disabled or the wireless radio is turned off.
4 Device access status indicator
When the indicator is on, the small form factor solid-state drive is reading or writing data.
5 Power-on status indicator
On: The computer is on.
Blinking: The computer is in sleep mode.
Off: The computer is off.
6 Caps Lock indicator
When the indicator is on, the Caps Lock mode is enabled. You can type all alphabetic characters (A-Z) in upper case without pressing the Shift key.
7 Illuminated dot in the ThinkPad logo (on some models)
The illuminated dot in the ThinkPad logo functions as a system status indicator.
Red: The computer is on.
Fast blinking red: The computer is turning off.
Slow blinking red: The computer is in sleep mode.
Off: The computer is off.
Power status indicators The computer has status indicators that show the power mode (sleep, hibernation, or normal), ac power status, and battery status. The following shows the locations and the meaning of the indicators:
The following illustration shows the locations of the ac power status indicator.
Chapter 1. Product overview 7
Green: The ac power adapter is connected.
Off: The ac power adapter is not connected.
The following figure shows the locations of the sleep mode status indicator and the battery status indicator.
Note: Your computer might have slight variations from the following illustration.
1 Sleep status indicator (on some models)
Green: The computer is in sleep mode.
Blinking green: The computer is entering sleep or hibernation mode, or is resuming normal operation.
2 Battery status indicator (on some models)
Green: The battery charge level is 20% or more.
Orange: The battery charge level is between 5% and 20%.
Fast blinking orange: The battery charge level is 5% or less, or the battery is charging.
Slow blinking orange: The battery is being charged. When the charge level reaches 20%, the blinking color changes to green.
Slow blinking green: The battery charge level is between 20% and 80%, and charging is continuing. When the battery charge level reaches 80%, the battery status indicator stops blinking, but the charging might continue until the battery is 100% charged.
Quick blinking orange: An error has occurred with the battery.
Off: The battery is detached or the computer is powered off.
8 User Guide
Note: If the computer is operating on battery power, the battery status indicator does not work while the computer is turned off or is in sleep mode or hibernation mode.
Locating important product information This section provides information to help you locate your machine type and model label, FCC ID and IC Certification label, and the Microsoft Certificate of Authenticity (COA) label.
Machine type and model label The machine type and model label identifies your computer. If you contact Lenovo for help, the machine type and model number will help support technicians to identify your computer and provide the highest level of service.
You can find the machine type and model of your computer on the label as shown below:
FCC ID and IC Certification number label You can find the FCC ID and IC Certification numbers for the installed transmitter cards on the bottom of your computer as shown below.
Certificate of Authenticity label The Microsoft Certificate of Authenticity label for the preinstalled operating system is attached. Printed on this label are the product ID and the product key information for your computer. Record this information and keep it in a safe place. You might need these numbers to start your computer or reinstall the operating system.
Chapter 1. Product overview 9
Note: The Certificate of Authenticity label applies only to computers preinstalled with the Windows 7 operating system.
The Windows Certificate of Authenticity label of your computer is shown as below:
Features Processor
To view the processor information of your computer, do the following:
For Windows 7: Click Start, right-click Computer. Then click Properties.
For Windows 8: From the desktop, move the cursor to the top-right or bottom-right corner of the screen to display the charms. Then click Settings PC info.
Memory
Double data rate 3 low voltage (DDR3L) synchronous dynamic random access memory (SDRAM)
Storage device
Small form factor solid-state drive
Display
The color display uses Thin Film Transistor (TFT) technology.
Size: 14 inches (355 mm)
LCD resolution: up to 1600-by-900
Brightness control
Camera
Digital dual array microphones
Multi-touch screen (on some models)
Keyboard
6-row full size backlit keyboard
UltraNav pointing device (TrackPoint pointing device and touch pad)
Fn key function
Black button
Volume control buttons
10 User Guide
Speaker mute button
Microphone mute button
Interface
External monitor connector (Mini DisplayPort connector)
Combo audio jack
One USB 3.0 connector
One Always on USB connector
4-in-1 media card reader
Wireless features
Integrated wireless LAN
Integrated Bluetooth (on some models)
Integrated wireless WAN (on some models)
Security features
Fingerprint reader (on some models)
Specifications Size
Width: 13.03 inches (331 mm)
Depth: 8.90 inches (226 mm)
Height:
Models with a multi-touch screen: 0.82 inches (20.85 mm)
Models without a multi-touch screen: 0.31 to 0.68 inches (8.0 to 17.3 mm)
Heat output
65 W (222 Btu/hr) maximum or 90 W (307 Btu/hr) maximum (depending on the model)
Power source (ac power adapter)
Sine-wave input at 50 to 60 Hz
Input rating of ac adapter: 100 to 240 V ac, 50 to 60 Hz
Battery life
For the percentage of remaining battery power, check the battery status icon in the Windows notification area.
Operating environment This section provides information about your computer operating environment.
Environment:
Maximum altitude without pressurization: 3048 m (10 000 ft)
Temperature
Chapter 1. Product overview 11
At altitudes up to 2438 m (8000 ft)
Operating: 5.0C to 35.0C (41F to 95F)
Storage: 5.0C to 43.0C (41F to 109F)
At altitudes above 2438 m (8000 ft)
Maximum temperature when operating under the unpressurized condition: 31.3C (88F)
Note: When you charge the battery pack, its temperature must be at least 10C (50F).
Relative humidity:
Operating: 8% to 80%
Storage: 5% to 95%
If possible, place your computer in a well-ventilated and dry area without direct exposure to sunshine.
Keep electrical appliances such as an electric fan, radio, air conditioner, and microwave oven away from your computer because the strong magnetic fields generated by these appliances can damage the monitor and data on the solid-state drive.
Do not place any beverages on top of or beside the computer or other attached devices. If liquid is spilled on or in the computer or an attached device, a short circuit or other damage might occur.
Do not eat or smoke over your keyboard. Particles that fall into your keyboard can cause damage.
Lenovo programs Your computer comes with Lenovo programs to help you work more easily and securely. Depending on the Windows operating system preinstalled, the programs might vary.
To learn more about the programs and other computing solutions offered by Lenovo, go to http://www.lenovo.com/support
Accessing Lenovo programs on the Windows 7 operating system On the Windows 7 operating system, you can access ThinkVantage programs from the Lenovo ThinkVantage Tools program or from Control Panel.
Accessing programs from the Lenovo ThinkVantage Tools program
Click Start All Programs Lenovo ThinkVantage Tools. Double-click a program icon to access the application.
Note: If a program icon in the Lenovo ThinkVantage Tools application navigation window is dimmed, it indicates that you need to install the application manually. To install the application manually, double-click the application icon. Then, follow the instructions on the screen. When the installation process completes, the application icon will be activated.
Table 1. Programs in the Lenovo ThinkVantage Tools program
Program Icon name
Access Connections Internet Connection
Communications Utility Web Conferencing
Fingerprint Software Fingerprint Reader
Lenovo Solution Center System Health and Diagnostics
12 User Guide
Table 1. Programs in the Lenovo ThinkVantage Tools program (continued)
Program Icon name
Mobile Broadband Connect 3G Mobile Broadband
Password Manager Password Vault
Power Manager Power Controls
Recovery Media Factory Recovery Disks
Rescue and Recovery Enhanced Backup and Restore
SimpleTap SimpleTap
System Update Update and Drivers
Note: Depending on your computer model, some of the programs might not be available.
Accessing programs from Control Panel
Click Start Control Panel. Depending on the application you want to access, click the corresponding section and then click the corresponding green text.
Note: If you do not find the application you need in Control Panel, open the Lenovo ThinkVantage Tools application navigation window and double-click the dimmed icon to install the application you need. Then, follow the instructions on the screen. When the installation process completes, the application icon will be activated, and you can find the application in Control Panel.
The programs and the corresponding sections and green texts in Control Panel are listed in the following table.
Table 2. Programs in Control Panel
Program Control Panel section Green text in Control Panel
Access Connections Network and Internet Lenovo - Internet Connection
Communications Utility Hardware and Sound Lenovo - Web Conferencing
Fingerprint Software System and Security
Hardware and Sound
Lenovo - Fingerprint Reader
or
Lenovo - Notebook Fingerprint Reader
Lenovo Solution Center System and Security Lenovo - System Health and Diagnostics
Message Center Plus Programs Messages from Lenovo
Mobile Broadband Connect Network and Internet Lenovo - 3G Mobile Broadband
Password Manager System and Security
User Accounts and Family Safety
Lenovo - Password Vault
Power Manager Hardware and Sound
System and Security
Lenovo - Power Controls
Recovery Media System and Security Lenovo - Factory Recovery Disks
SimpleTap Programs Lenovo - SimpleTap
System Update System and Security Lenovo - Update and Drivers
Rescue and Recovery System and Security Lenovo - Enhanced Backup and Restore
Note: Depending on your computer model, some of the programs might not be available.
Chapter 1. Product overview 13
Accessing Lenovo programs on the Windows 8 operating system If your computer is preinstalled with the Windows 8 operating system, you can access Lenovo programs by pressing the Windows key to go to the Start screen, and then click a Lenovo program to launch it. If you cannot find the program you need, move the cursor to the bottom right corner of the screen to bring up the charms. Then click the Search charm to search for the desired program.
Your computer supports the following Lenovo programs:
Fingerprint Software
Lenovo Companion
Lenovo Settings
Lenovo Mobile Access
Lenovo Solution Center
Lenovo Support
Lenovo ThinkVantage Tools
Password Manager
System Update
For an introduction to these programs, see An introduction to Lenovo programs on page 14.
An introduction to Lenovo programs This topic provides a brief introduction to some Lenovo programs.
Note: Depending on your computer model, some of the programs might not be available.
Access Connections
The Access Connections program is a connectivity assistant program for creating and managing location profiles. Each location profile stores all the network and Internet configuration settings needed for connecting to a network infrastructure from a specific location such as a home or an office.
By switching between location profiles as you move your computer from place to place, you can quickly and easily connect to a network with no need to reconfigure your settings manually and restart the computer each time.
Client Security Solution
The Client Security Solution program protects your computer by securing client data and deflecting security breach attempts. It also can help manage your passwords, recover a forgotten password, monitor security settings on your computer, and suggest how to enhance your computer security.
Communications Utility
Use the Communications Utility program to configure settings for the camera and audio devices.
Fingerprint Software
If your system comes with a fingerprint reader, the Fingerprint Software program enables you to enroll your fingerprint and associate it with your Windows password. As a result, the fingerprint authentication can replace your password and enable simple and secure user access.
GPS Enabler
If the PCI Express Mini Card installed in your computer supports GPS, your computer can receive signals from GPS satellites and determine its location. If your computer is connected to the Internet, you can find your location on a real-time map provided by Google Maps or Microsoft Bing Maps.
Lenovo Companion
14 User Guide
Through the Lenovo Companion program, you can get the information about the accessories for your computer, view bolgs and articles about your computer, and check for other recommended programs.
Lenovo Settings
Use the Lenovo Settings program to enhance your computing experience by turning your computer into a portable hotspot, configuring camera and audio settings, optimizing your power settings, and creating and managing multiple network profiles.
Lenovo Mobile Access
The Lenovo Mobile Access program enables you to manage your mobile broadband connection. You can create an account, add money to the account, and purchase mobile broadband sessions using your account.
Lenovo Solution Center
The Lenovo Solution Center program enables you to troubleshoot and resolve computer problems. It combines diagnostic tests, system information collection, security status, and support information, along with hints and tips for maximum system performance.
Lenovo Support
The Lenovo Support program enables you to register your computer with Lenovo, check the computer health condition and battery status, download and view user manuals for your computer, get the warranty information of your computer, and explore help and support information.
Lenovo ThinkVantage Tools
The Lenovo ThinkVantage Tools program helps you work more easily and securely by providing easy access to various programs, such as Fingerprint Software, Lenovo Solution Center, and so on.
Message Center Plus
The Message Center Plus program automatically displays messages to inform you about important notices from Lenovo, such as alerts on system updates and alerts on conditions that require your attention.
Mobile Broadband Connect
The Mobile Broadband Connect program enables your computer to connect to the mobile broadband (3G) network through a supported wireless WAN card.
Password Manager
The Password Manager program automatically captures and fills in authentication information for Windows programs and Web sites.
Power Manager
The Power Manager program provides convenient, flexible, and complete power management for your computer. It enables you to adjust your computer power settings to achieve the best balance between performance and power saving.
Recovery Media
The Recovery Media program enables you to restore the contents of the hard disk drive to the factory default settings.
Rescue and Recovery
The Rescue and Recovery program is a one-button recovery and restore solution that includes a set of self-recovery tools to help you diagnose computer problems, get help, and recover from system crashes, even if you cannot start the Windows operating system.
SimpleTap
The SimpleTap program provides you with a quick way to customize some basic computer settings such as muting the speakers, adjusting the volume, locking the computer operating system, launching a program, opening a Web page, opening a file, and so on. You also can use the SimpleTap program to access the Lenovo App Shop, from which you can download various programs and computer software.
Chapter 1. Product overview 15
To start the SimpleTap program in a quick way, do any of the following:
Click the red SimpleTap launch point on the desktop. The red launch point is available on the desktop after you have launched the SimpleTap program for the first time.
Press the black button on the keyboard (next to the volume control buttons).
Note: The SimpleTap program is only available on certain models preinstalled with the Windows 7 operating system. If your Windows 7 model is not preinstalled with the SimpleTap program, you can download it from http://www.lenovo.com/support.
System Update
The System Update program helps you keep the software on your computer up-to-date by downloading and installing software update packages (Lenovo programs, device drivers, UEFI BIOS updates, and other third party programs).
16 User Guide
Chapter 2. Using your computer
This chapter provides information on using some of the computer components.
Registering your computer on page 17
Frequently asked questions on page 17
Special keys and buttons on page 19
Using the multi-touch screen on page 22
Using the UltraNav pointing device on page 23
Power management on page 27
Connecting to the network on page 30
Presentations and multimedia on page 34
Using audio features on page 37
Using the camera on page 38
Using a flash media card on page 38
Registering your computer When you register your computer, information is entered into a database, which enables Lenovo to contact you in case of a recall or other severe problem. After you registered your computer with Lenovo, you will also receive quicker service when you call Lenovo for help. In addition, some locations offer extended privileges and services to registered users.
To register your computer with Lenovo, do one of the following:
Go to http://www.lenovo.com/register and follow the instructions on the screen to register your computer.
Connect your computer to the Internet and register your computer through a preinstalled registration program:
For Windows 7: The preinstalled Lenovo Product Registration program launches automatically after you have used your computer for a time. Follow the instructions on the screen to register your computer.
For Windows 8: Open the Lenovo Support program. Then click Registration and follow the instructions on the screen to register your computer.
Frequently asked questions Here are a few tips that will help you optimize the use of ThinkPad notebook.
To ensure that you receive the best performance from your computer, browse the following Web page to find information such as aids for troubleshooting and answers to frequently asked questions at: http://www.lenovo.com/support/faq.
Can I get my user guide in another language?
To download the user guide in another language, go to http://www.lenovo.com/support. Then follow the instructions on the screen.
On the go and need to use battery power more effectively?
Copyright Lenovo 2012 17
To conserve power, or to suspend operation without exiting applications or saving files, see the explanation about Power-saving modes on page 29.
To achieve the best balance between performance and power saving, change power plan settings. See Managing the battery power on page 28.
If your computer will be turned off for an extended period of time, follow the instructions in Disabling the built-in battery on page 28 to disable the internal built-in battery so as to prevent battery power from draining.
Concerned about security or need to securely dispose of data stored on your solid-state drive?
Study Chapter 4 Security on page 45 to find out how you can protect your computer from theft and unauthorized use.
Use the Password Manager program to protect the data stored on your computer. For details, see the help information system of the program.
Before you dispose of the data on the solid-state drive, be sure to read Notice on deleting data from your solid-state drive on page 55.
Getting connected in different locations is a challenge?
To troubleshoot a wireless networking issue, go to http://www.lenovo.com/support/faq.
Take advantage of the networking features provided by the Access Connections program (on the Windows 7 operating system) or Location Awareness in the Lenovo Settings program (on the Windows 8 operating system).
To learn more about using the wireless features of your computer, refer to Wireless connections on page 30.
To travel more confidently, be sure to check the tips in Traveling with your computer on page 43.
Press Fn+F5, or use the wireless radio switch to enable or disable the wireless features.
Need to give presentations or attach an external monitor often?
Use Fn+F7 key combination to switch display output location.
Ensure that you follow the procedure of Attaching an external monitor on page 34.
With the Extend desktop function, you can display output on both the computer display and an external monitor.
You have been using your computer for some time already, and it is getting slower?
Follow the general tips for preventing problems introduced in General tips for preventing problems on page 85.
You can diagnose problems yourself by following the instructions in Diagnosing problems on page 89.
Also Recovery tool is provided on your computer solid-state drive. For more information, see Chapter 5 Recovery overview on page 57.
Print the following sections and keep them with your computer in case you are unable to access this online help when necessary.
Installing a new operating system on page 65
Computer stops responding on page 89
Power problems on page 101
18 User Guide
Special keys and buttons Your computer has several special keys and buttons to help you work more easily and effectively.
Function key combinations To use the function key combination, press and hold the Fn key 1 , then press one of the function keys. Release both keys.
Note: Your computer might have slight variations from the following illustration.
Power conservation
Put your computer into sleep mode. To return to normal operation, press the Fn key only.
If you want to use the combination to put the computer into hibernation mode, you need to change your power plan settings. To access power plan settings, do the following:
For Windows 7: Start the Power Manager program and then click the Power Plan tab. For instructions on how to start the Power Manager program, see Accessing Lenovo programs on the Windows 7 operating system on page 12.
For Windows 8: Right-click the battery status icon from the Windows notification area and click Power Options. Then click Change plan settings that is next to your power plan.
Switching a display output location
Fn+F7
Switch the display output location between the computer display and an external monitor by selecting one of the following options:
Computer display only
Computer display and external monitor (same image)
Computer display and external monitor (extended desktop function)
External monitor only
Note: The Windows+P key combination has the same functionality as Fn+F7.
Chapter 2. Using your computer 19
Enabling or disabling the wireless features
Fn+F5
Enable or disable the built-in wireless networking features. If you press Fn+F5, a list of wireless features is displayed. You can quickly change the radio state of each feature in the list.
To enable or disable the wireless features by using Fn+F5, the following device drivers must be installed on your computer beforehand:
Power Management Driver
On Screen Display Utility
Wireless device drivers
For information on the wireless features, refer to Wireless connections on page 30.
Launching the camera and audio settings
Fn+F6
For Windows 7: Open the Communications settings window, in which you can preview your video image, take a snapshot of your current image, and change the camera and audio settings.
For Windows 8: Start the Lenovo Settings program. To use the camera or change the camera settings, click Camera. To adjust the audio settings, click Audio.
Adjusting the brightness level of the computer display
Fn+F8: The computer display becomes dimmer.
Fn+F9: The computer display becomes brighter.
This function key combination changes the brightness level temporarily. To change the default brightness level, modify the settings of the Power Option in Control Panel or use Power Manager.
Multimedia control
Fn+F10: Previous track/scene
Fn+F11: Play or pause
Fn+F12: Next track/scene
Other functions
Fn+Spacebar: This combination is used to control the keyboard backlight.
There are three states for the keyboard backlight: On (Low), On (High), and Off.
Press Fn+Spacebar once to turn on the keyboard backlight in low brightness level. To adjust the backlight to a high brightness level, press the key combination again. Pressing the key combination for a third time turns off the keyboard backlight.
Fn+F3: Lock your computer.
Fn+B: Has the same function as the Break key on the conventional keyboard.
Fn+K: Has the same function as the ScrLK key on the conventional keyboard.
Fn+P: Has the same function as the Pause key on the conventional keyboard.
Fn+S: Has the same function as the SysRq key on the conventional keyboard.
Volume and mute buttons You can adjust the sound level of the speakers by using the following three buttons:
Note: Your computer might have slight variations from the following illustration.
20 User Guide
1 Speaker mute button 2 Volume control button 3 Microphone mute button
If you mute the sound and then turn off your computer, the sound will remain muted when you turn on your computer again. To turn on the sound, press the plus (+) or minus (-) button.
Setting the volume
To open the window for adjusting the output volume or the recording volume, do the following:
1. Go to Control Panel and click Hardware and Sound Sound. The Sound window opens.
2. Click the Playback tab or Recording tab, and then click a device, which you want to customize.
3. Click the Properties button.
4. Click the Levels tab, and then change the volume by moving the slider.
You also can get access to the desktop volume control by using the volume icon on the taskbar at the lower right of the screen. For details about controlling volume, refer to your Windows help information system.
Setting the microphone mute button
By default, you can toggle all of your recording devices between the mute state and the un-mute state by pressing the microphone mute button.
If you want to toggle one of the recording devices between the mute state and the un-mute state, do the following:
1. Press Fn+F6. The Communications settings window opens.
2. Click the Manage Settings button. The Communications Utility window opens.
3. On the VoIP Call Settings tab, click Microphone mute button settings. The Setting for Microphone Mute window opens.
4. Select Only the recording device selected below: and then select the recording device from the drop-down list box.
5. Click OK.
Windows key Note: Your computer might have slight variations from the following illustration.
Chapter 2. Using your computer 21
On the Windows 7 operating system, press the Windows key to open the Start menu. On the Windows 8 operating system, press the Windows key to switch between the current workspace and the Start screen.
You also can use the Windows key together with another key to achieve other functions. For details, refer to the help information system of the Windows operating system.
Using the multi-touch screen This topic provides instructions on how to use the multi-touch screen that is available on some models.
Tap
Tap on the screen with your fingertip to launch an application, select an item, or open a menu.
Press and hold
Press and hold an item or a blank area on the screen for a few seconds to open the context menu.
Drag
Tap and hold your finger on an item, such as an image or an icon on the screen, then pull it along with your finger to the desired location. After you have moved the item to the desired location, drop it.
Swipe or slide
Move your finger in a vertical or horizontal direction on the screen to scroll through the Start screen, Web pages, lists, picture thumbnails, and so on.
Zoom in or zoom out
Move two fingers closer together on the screen to zoom in, or move two fingers apart on the screen to zoom out.
Rotate
Put two or more fingers on an item and then rotate your fingers. This operation enables you to rotate the selected items in a direction you move your fingers.
Double tap
For some applications, quickly tap twice on the screen to zoom in. Double-tap again to zoom out.
22 User Guide
Tips on using the multi-touch screen
The multi-touch screen is a glass panel covered with a plastic film. Do not apply pressure or place any metallic object on the screen, which might damage the touch panel or cause it to malfunction.
Do not use inanimate objects, fingernails, or gloved fingers for input on the screen.
Regularly calibrate the accuracy of the finger input to avoid a discrepancy.
Tips on cleaning the multi-touch screen
Turn off the computer before cleaning the multi-touch screen.
Use a dry, soft, and lint-free cloth or a piece of absorbent cotton to remove fingerprints or dust from the multi-touch screen. Do not apply solvents to the cloth.
Gently wipe the screen using top-down motion. Do not apply any pressure on the screen.
Using the UltraNav pointing device Your computer comes with the UltraNav pointing device. The UltraNav pointing device consists of the TrackPoint pointing device and the touch pad, each of which is itself a pointing device with both basic and extended functions. You can configure both devices by choosing the settings you prefer as follows:
Set both the TrackPoint pointing device and the touch pad as pointing devices.
This setting enables the use of all the basic and extended functions of the TrackPoint pointing device and the touch pad.
Set the TrackPoint pointing device as the main pointing device and the touch pad for extended functions only.
This setting enables the use of all basic and extended functions with the TrackPoint pointing device while limiting the use of the touch pad to scrolling, tap zones, and slow-motion pointer functions.
Set the TrackPoint pointing device as the main pointing device, and disable the touch pad.
Set the touch pad as the main pointing device, and disable the TrackPoint pointing device.
Changing the UltraNav pointing device settings
To change your UltraNav pointing device settings, go to Control Panel and click Hardware and Sound Mouse UltraNav. Then change the settings as desired.
Using the TrackPoint pointing device The TrackPoint pointing device consists of a pointing stick 1 on the keyboard and three click buttons at the bottom of the keyboard. To move the pointer 5 on the screen, you apply pressure to the nonslip cap on the pointing stick in any direction parallel to the keyboard; the pointing stick itself does not move. The speed at which the pointer moves depends on the pressure you apply to the pointing stick. The functions of the left 4
and right 2 click buttons correspond to those of the left and right mouse buttons on a conventional mouse. The TrackPoint center button 3 , called the scroll bar, enables you to scroll Web pages or documents in any direction with no need to use the graphic scroll bars on the side of the window.
Note: Your computer might have slight variations from the following illustration.
Chapter 2. Using your computer 23
If you are not familiar with the TrackPoint, these instructions will help you get started:
1. Place your hands in the typing position, and press gently with either index finger on the pointing stick in the direction in which you want the pointer to move.
To move the pointer, press the pointing stick away from you to move it up, toward you to move it down, to one side or the other to move it sideways.
Note: The pointer might drift. This is not a defect. Stop using the TrackPoint pointing device for a few seconds; then the pointer will stop moving.
2. To select and drag as required by your software, press the left or right click button with either thumb and move the TrackPoint pointing stick.
By enabling Press-to-Select, you can make the TrackPoint pointing stick function the same as the left or right click button.
Customizing the settings of the TrackPoint pointing device
You can customize the TrackPoint pointing device and its buttons as follows:
Switch the functions of the left and right buttons.
Change the sensitivity of the TrackPoint pointing device.
Enable the Press-to-Select function.
Enable the TrackPoint Scrolling Tips.
To customize the settings of the TrackPoint pointing device, do the following:
1. Go to Control Panel and click Hardware and Sound Mouse UltraNav.
2. Under TrackPoint, proceed to changing the settings.
Changing the cap
The cap 1 on the end of the TrackPoint pointing stick is removable. You can replace it as shown in the drawing.
24 User Guide
Note: If you replace the keyboard, a new keyboard is shipped with the default cap. If you wish, you can keep the cap from your old keyboard and use it on the new one.
Using the touch pad The touch pad is a pad 1 below the TrackPoint buttons at the bottom of the keyboard. To move the pointer 2 on the screen, slide your fingertip over the pad in the direction in which you want the pointer to move.
Note: Your computer might have slight variations from the following illustration.
The whole touch pad 1 is an active area sensitive to finger movement. The bottom area of the touch pad consists of a left click zone 3 and a right click zone 2 .
Movement on the touch pad emulates operations on the mouse. Before interacting with the touch pad, make sure the cursor stays on the object that you want to operate.
Chapter 2. Using your computer 25
Left click: To mimic a single left click on a mouse, tap anywhere on the touch pad once or press the left click zone 3 once. To mimic a double click on a mouse, tap anywhere on the touch pad twice or press the left click zone 3 twice.
Right click: To mimic a right click on a mouse, press the right click zone 2 once.
Left click and drag: To mimic a left click and drag on a mouse, do either of the following: Tap anywhere on the touch pad twice and hold the finger on the touch pad, slide the same finger or
another finger on the touch pad, whichever is more convenient and then release the finger(s). Press the left click zone 3 and hold the finger on the touch pad, slide another finger on the touch
pad, and then release both fingers.
Right click and drag: To mimic a right click and drag on a mouse, press the right click zone 2 and hold the finger on the touch pad, slide another finger on the touch pad, and release both fingers.
Using the multi-touch touch pad
The touch pad of your computer supports multi-touch with which you can zoom in, zoom out, or scroll on the screen while browsing the Internet or reading or editing a document.
For details, refer to the Help in UltraNav.
Customizing the touch pad
To customize the touch pad, do the following:
1. Go to Control Panel and click Hardware and Sound Mouse UltraNav.
2. Under TouchPad, proceed to changing the settings.
Disabling the UltraNav pointing device and using an external mouse If you attach an external mouse to a USB connector, you can use the external mouse simultaneously with the TrackPoint pointing device and the touch pad.
Disabling the TrackPoint pointing device or the touch pad
To disable the TrackPoint pointing device or the touch pad, do the following:
1. Go to Control Panel and click Hardware and Sound Mouse UltraNav.
2. To disable the TrackPoint pointing device, clear the check box for Enable TrackPoint.To disable the touch pad, clear the check box for Enable TouchPad.
3. Click OK.
Adding the UltraNav icon to the Windows notification area For easy access to the UltraNav properties, you can enable the display of the UltraNav icon in the Windows notification area.
To enable the display of the UltraNav icon in the Windows notification area, do the following:
1. Go to Control Panel and click Hardware and Sound Mouse UltraNav.
2. Select the check box for Show UltraNav icon on the system tray.
3. Click OK. You can now change the properties of the UltraNav pointing device by clicking the UltraNav icon in the Windows notification area.
Note: If you cannot see the UltraNav icon, click the triangular icon in the Windows notification area to show hidden icons.
26 User Guide
Power management When you need to use your computer away from electrical outlets, you depend on battery power to keep your computer running. Different computer components consume power at different rates. The more you use the power-intensive components, the faster you consume battery power.
Spend more time unplugged with ThinkPad batteries. Mobility has revolutionized business by allowing you to take your work wherever you go. With ThinkPad batteries, you will be able to work longer without being tied to an electrical outlet.
Checking the battery status The battery icon in the Windows notification area displays the percentage of battery power remaining.
The rate at which you use battery power will determine how long you can use the battery of your computer between charges. Because each computer user has different habits and needs, it is difficult to predict how long a battery charge will last. There are two main factors:
How much energy is stored in the battery when you begin to work.
The way you use your computer:
How often you access the solid-state drive.
How bright you make the computer display.
To check for detailed battery status information, do the following:
For Windows 7: Open the Power Manager program and click the Battery tab.
For Windows 8: Open the Lenovo Support program and click Battery Health, or open the Lenovo Settings program and click Power.
Using the ac power adapter The power to run your computer can come either from the lithium-ion (Li-ion) built-in battery provided with it, or from ac power through the ac power adapter. While you use ac power, the battery charges automatically.
The ac power adapter that comes with your computer has two basic components:
The transformer pack that converts ac power adapter for use with the computer.
The power cord that plugs into the ac outlet and into the transformer pack.
Attention: Using an improper power cord could cause severe damage to your computer.
Connecting the ac power adapter
To use the ac power adapter, do the following. Be sure to take these steps in the order in which they are given here.
1. Connect the ac power adapter to the ac power connector of the computer.
2. Connect the power cord to the transformer pack.
3. Plug the power cord into an electrical outlet.
Tips on using the ac power adapter
You can check the status of your battery at any time by looking at the battery meter at the bottom of your display.
When the ac power adapter is not in use, disconnect it from the electrical outlet.
Chapter 2. Using your computer 27
Do not bind the power cord tightly around the ac power adapter transformer pack when it is connected to the transformer.
Before you charge the battery, ensure that its temperature is at least 10C (50F).
You can charge the battery when the ac power adapter is connected to the computer. You need to charge it in any of the following conditions:
When a new battery is installed.
If the battery status indicator starts blinking
If the battery has not been used for a long time
Charging the battery When you check battery status and find that the percentage of power remaining is low or when the power alarm alerts you that the remaining power is low, you need to charge your battery.
If an ac outlet is convenient, plug the ac power adapter into it, and then insert the jack into the computer. The battery will be fully charged in about 2 hours. This is affected by the battery size and the physical environment. The battery status indicator will let you know that the battery is charging, and will also notify you when the battery is fully charged.
Note: To increase the life of the battery, the computer does not start recharging the battery if the remaining power is greater than 95%.
Disabling the built-in battery You need to disable the built-in battery in the following situations:
Your computer will be turned off for an extended period of time.
Your SIM card needs to be replaced.
To disable the built-in battery, do the following:
1. Turn off your computer and disconnect the ac power adapter and all cables from the computer.
2. Turn on your computer. Press F1 to enter ThinkPad Setup when the ThinkPad logo appears.
3. Select Config Power. The submenu is displayed.
4. Select Disable Built-in Battery.
5. Click Yes in the Setup Warning window. Wait for a few minutes till the inside of the computer cools.
Maximizing the battery life To maximize the life of the battery, do the following:
Use the battery until the charge is completely depleted; that is, use the battery until the battery status indicator starts blinking orange.
Recharge the battery completely before using it. The battery is fully charged if the battery indicator shows green when the ac power adapter is plugged in.
Always use power management features such as power modes, screen blank, sleep, and hibernation.
Managing the battery power To achieve the best balance between performance and power saving, adjust your power plan settings. To access power plan settings, do the following:
28 User Guide
For Windows 7: Start the Power Manager program and then click the Power Plan tab. For instructions on how to start the Power Manager program, see Accessing Lenovo programs on the Windows 7 operating system on page 12.
For Windows 8: Right-click the battery status icon from the Windows notification area and click Power Options. Then click Change plan settings that is next to your power plan.
For more information, refer to the help information system of the program.
Power-saving modes There are several modes that you can use at any time to conserve power. This section introduces each mode and gives tips on the effective use of the battery power.
Understanding the power-saving modes
Screen blank (for the Windows 7 operating system only) The computer display requires considerable battery power. To turn off power to the display, right-click the battery gauge icon from the Windows notification area and select Power off display.
Sleep In sleep mode, your work is saved to memory, and then the solid state drive or the hard disk drive and the computer display are turned off. When your computer wakes up, your work is restored within seconds.
To put your computer into sleep mode, press Fn+F4. To return from sleep mode, press the Fn key.
Depending on the computer model, your computer might support the 30 Day Standby function. When this function is enabled, the computer consumes even less power in sleep mode and takes only seconds to resume normal operation when you press the power button. For more information about the 30 Day Standby function, do the following:
For Windows 7: Refer to the help information system of the Power Manager program. For instructions on how to start the Power Manager program, see Accessing Lenovo programs on the Windows 7 operating system on page 12.
For Windows 8: Open the Lenovo Settings program and click Power.
Hibernation By using this mode, you can turn off your computer completely without saving files or exiting from any programs that are running. When the computer enters hibernation, all open programs, folders, and files are saved to the hard disk, and then the computer turns off.
To put the computer into hibernation mode, change your power plan settings. To access power plan settings, do the following:
For Windows 7: Start the Power Manager program and then click the Power Plan tab. For instructions on how to start the Power Manager program, see Accessing Lenovo programs on the Windows 7 operating system on page 12.
For Windows 8: Right-click the battery status icon from the Windows notification area and click Power Options. Then click Change plan settings that is next to your power plan.
Wireless off When you are not using the wireless features, such as Bluetooth or wireless LAN, turn them off. This will help conserve power. To turn off the wireless features, press Fn+F5 or use the wireless radio switch.
Enabling the wakeup function
If you put your computer into hibernation mode, and the wakeup function is disabled (this is the default setting), the computer does not consume any power. If the wakeup function is enabled, it consumes a small amount of power. To enable the function, do the following:
1. Go to Control Panel and click System and Security Administrative Tools.
2. Click Administrative Tools.
Chapter 2. Using your computer 29
3. Click Task Scheduler. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
4. From the left pane, select the task folder for which you want to enable the wakeup function. The scheduled tasks are displayed.
5. Click a scheduled task, and then click the Conditions tab.
6. Under Power, select the check box for Wake the computer to run this task.
Enabling the battery alarm on the Windows 7 operating system
For the Windows 7 operating system, you can program your computer so that when the battery power falls below a certain level, three events occur:
The alarm goes off.
A warning message is displayed.
The LCD is turned off.
To enable the battery alarm, do the following:
1. Start Power Manager.
2. Click the Global Power Settings tab.
3. For Low battery alarm or Critically low battery alarm, set the percentage of the power level and set the action.
Note: If your computer enters sleep or hibernation mode when the battery is low, but the alarm message has not yet been displayed, the message will be displayed when the computer resumes. To resume normal operation, click OK.
Connecting to the network Your computer might have one or more network cards for connecting to the Internet and to your company's wireless LAN network.
Note: Some models come with a built-in wireless WAN card enabling you to establish cellular wireless connections to remote public or private networks.
The Access Connections program is a connectivity assistant program for creating and managing location profiles. Each location profile stores all the network and Internet configuration settings needed for connecting to a network infrastructure from a specific location such as a home or an office.
Ethernet connections You can connect to your local network or a broadband connection by use of the Ethernet feature built into your computer. If your are using the Windows 7 operating system, the Access Connections program also enables you to manage your location profiles. For more information, see Accessing Lenovo programs on the Windows 7 operating system on page 12.
DANGER
Your computer has an Ethernet connector. To avoid the risk of electrical shock, do not connect the telephone cable to the Ethernet connector.
Wireless connections Wireless communication is the transfer of data without the use of cables but by means of radio waves only.
30 User Guide
Depending on the wireless device used in your computer, you might be able to connect to the following categories of wireless networks.
Wireless LAN
A wireless local area network (LAN) covers a relatively small geographic area, such as an office building or a house. Devices based on the 802.11 standards can connect to this network.
Your computer comes with a built-in wireless network card and a configuration utility to help you make wireless connections and monitor the status of your connection, so that you can stay connected to your network while you are in the office, in a meeting room, or at home, with no need for a wired connection.
Tips for using the wireless LAN feature
To achieve the best connection, use the following guidelines:
Place your computer so that there are as few obstacles as possible between the wireless LAN access point and the computer.
Open your computer display to an angle of slightly more than 90 degrees.
If you use the wireless feature (the 802.11 standard) of your computer simultaneously with a Bluetooth option, the data transmission speed can be delayed and the performance of the wireless feature can be degraded.
Wireless WAN
Wireless Wide Area Network (wireless WAN), using cellular networks for data transmission, enables you to establish wireless connections over remote public or private networks. These connections can be maintained over a large geographical area, such as a city or an entire country, by use of multiple antenna sites or satellite systems maintained by wireless service providers.
Some ThinkPad notebook computers come with a built-in wireless WAN card integrating some wireless WAN technologies, such as 1xEV-DO, HSPA, 3G, GPRS or LTE. By using the built-in wireless WAN card and the configuration utility that comes with your computer, you can establish wireless WAN connections and monitor the status of your connection.
Note: Wireless WAN service is provided by authorized service providers in some countries.
Tips for using the wireless WAN feature
To achieve the best connection, use the following guidelines:
Keep your computer away from your body.
Place your computer on a flat surface and open your computer display to an angel of slightly more than 90 degrees.
Place your computer away from concrete or brick walls that might dampen cellular signals.
Best reception will be available near windows and other locations where cellular phone reception is the strongest.
Bluetooth
Bluetooth is one of a number of technologies used to create a wireless personal area network. Bluetooth can connect devices a short distance from one another, and is commonly used for connecting peripheral devices to a computer, transferring data between hand-held devices and a personal computer, or remotely controlling and communicating with devices such as mobile phones.
Establishing a wireless connection To establish a wireless connection, do the following:
Chapter 2. Using your computer 31
1. Press Fn+F5 to turn on the wireless feature.
2. Click the wireless network connection status icon in the Windows notification area. A list of available wireless networks is displayed.
3. Double-click a network to connect to it. Provide required information if needed.
If you need to connect to different wireless networks in different locations, use the following software to manage multiple network profiles so that the computer connects to an available network automatically when the location changes:
For Windows 7: Use the Access Connections program. For instructions on how to start the Access Connections program, see Accessing Lenovo programs on the Windows 7 operating system on page 12.
For Windows 8: Open the Lenovo Settings program and click Location Awareness. See Accessing Lenovo programs on the Windows 8 operating system on page 14.
Attention:
If you want to use the wireless features on an airplane, check the wireless services with the airline before boarding the airplane.
If there are restrictions on the use of computer wireless features on an airplane, you need to disable your computer wireless features before boarding. To disable the wireless features, see Enabling or disabling the wireless features on page 34.
Using Bluetooth Some models are equipped with a Bluetooth card that is compliant with Bluetooth Specification 4.0.
To enable the Bluetooth feature on the Windows 7 operating system, press Fn+F5 to open the wireless radio switchboard. Then turn on the Bluetooth radio. For the Windows 8 operating system, the Bluetooth feature is on by default.
Sending data to a Bluetooth-enabled device
To send data to a Bluetooth-enabled device, do the following:
1. Enable the Bluetooth feature.
2. Right-click the data that you want to send.
3. Select Send To Bluetooth Devices.
4. Select a Bluetooth device and then follow the instructions on the screen.
Note: If you use the wireless feature (the 802.11 standard) of your computer simultaneously with a Bluetooth option, the data transmission speed can be delayed and the performance of the wireless feature can be degraded.
For more information about using the Bluetooth feature, refer to the Windows help information system and the Bluetooth help information system.
Checking the wireless network connection status You can check your computer wireless network connection status and wireless signal strength through the wireless network connection status icon in the Windows notification area. The more bars encompassed, the better the signal.
For the Windows 7 operating system, you also can check the Access Connections gauge, the Access Connections status icon, or the Access Connections wireless network connection status icon in the Windows notification area.
32 User Guide
Access Connections gauge
On the Windows 7 operating system, the Access Connections gauge in the Windows notification area displays the status and signal strength of your wireless connection.
You can find more detailed information about the status and signal strength of your wireless connection by opening the Access Connections program or by right-clicking the Access Connections gauge in the Windows notification area and selecting View Status of Wireless Connection.
Access Connections gauge states: wireless LAN
Power to the wireless radio is off or no signal.
Power to the wireless radio is on. The signal strength of the wireless connection is poor. To improve the signal strength, move your computer closer to the wireless access point.
Power to the wireless radio is on. The signal strength of the wireless connection is marginal.
Power to the wireless radio is on. The signal strength of the wireless connection is excellent.
Access Connections gauge states: wireless WAN
No signal
Signal level 1
Signal level 2
Signal level 3
Access Connections status icon
The Access Connections status icon displays general connection status.
Access Connections status icon states
No location profile is active or none exists.
Current location profile is disconnected.
Current location profile is connected.
Access Connections wireless status icon
The Access Connections wireless status icon displays the status and signal strength of your wireless connection.
You can find more detailed information about the status and signal strength of your wireless connection either by opening the Access Connections program or by double-clicking the Access Connections wireless status icon in the Windows notification area.
Wireless status icon states: wireless LAN
Power to the wireless radio is off.
Power to the wireless radio is on. No association.
Power to the wireless radio is on. No signal.
Power to the wireless radio is on. The signal strength of the wireless connection is excellent.
Power to the wireless radio is on. The signal strength of the wireless connection is marginal.
Chapter 2. Using your computer 33
Power to the wireless radio is on. The signal strength of the wireless connection is poor. To improve the signal strength, move your computer closer to the wireless access point.
Wireless status icon states: wireless WAN
Power to the wireless radio is off.
No association
No signal
Signal level 1
Signal level 2
Signal level 3
Note: If you have trouble in making a connection, try moving your computer closer to your wireless access point.
Enabling or disabling the wireless features To enable or disable the wireless features, do one of the following:
For Windows 7: Press Fn+F5 to open the wireless radio switchboard. Turn on or turn off the wireless feature as desired.
For Windows 8: Press Fn+F5 to enable or disable the Airplane mode. When the Airplane mode is enabled, all of your wireless devices are turned off.
You also can use the wireless radio switch to turn on or turn off the wireless radios of all the wireless devices on your computer.
Presentations and multimedia You can connect your computer to a projector to give presentations or you can connect your computer to an external monitor to expand your workspace.
Changing display settings You can change the display settings, such as display resolution, font size and so on.
To change the display settings, do the following:
1. Open Control Panel and click Appearance and Personalization.
2. Click Display for further configuration.
3. Click Apply. The change will take effect after you log off.
Connecting a projector or an external monitor This topic provides information about connecting a projector or an external monitor.
Attaching an external monitor Note: If you attach an external monitor, a video interface cable with a ferrite core installed on the cable is required.
Your computer supports a maximum video resolution of up to 1920x1200(with an external monitor attached to your computer through a Mini DisplayPort to VGA adapter), provided that the external monitor also supports that resolution. For details, refer to the manual provided with the external monitor.
34 User Guide
You can set any resolution for either the computer display or the external monitor. When you use both at the same time, the resolution of both is the same. If you set a higher resolution for the computer display, you can see only part of the screen at a time. You can see other parts by moving the image with the TrackPoint pointing device or another pointing device.
You can move the display output to the computer display, the external monitor, or both in the Display Settings window.
Connecting an external monitor To attach an external monitor, do the following:
1. Connect the external monitor to the mini DispalyPort connector; then connect the monitor to an electrical outlet.
2. Turn on the external monitor.
3. Change the display output location by pressing Fn+F7. This enables you to switch between viewing output on the external monitor, the computer monitor, and both monitors.
Note: If your computer cannot detect the external monitor, right-click on the desktop, then select Screen resolution. Click the Detect button.
Notes:
Do not change the display output location while a moving picture is being drawn, for example, while playing a movie or a game, or viewing a business presentation. Close the application before changing the display output location, or change the display mode before you open an MPEG file to play.
If you are attaching an external monitor that supports only VGA mode (640x480 resolution), do not view output on both the computer display and the external monitor. Doing so would cause the external monitor screen to be scrambled and the output not to be displayed; in addition, it could cause damage to the screen. Use the external monitor only.
If the external TFT monitor you connect has an analog interface, flickers or ripples might appear on some displays, such as the shutdown screen of the Windows operating system. This is caused by the external TFT monitor, and cannot be fixed by adjusting the external TFT monitor or the computer side settings.
Setting the external monitor type To set your external monitor type, do the following:
1. Connect the external monitor to the Mini DisplayPort connector, and then connect the monitor to an electrical outlet.
2. Turn on the external monitor.
3. Right-click on the desktop, and click Screen resolution.
Note: If your computer cannot detect the external monitor, click the Detect button.
4. Set Resolution.
5. Click Advanced Settings.
6. Click the Monitor tab. Check the monitor information window to ensure that the monitor type is correct. If it is, click OK to close the window; otherwise proceed with the following steps.
7. If more than two monitor types are displayed, select Generic PnP Monitor or Generic Non-PnP Monitor.
8. Click Properties. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
9. Click the Driver tab.
10. Click Update Driver.
Chapter 2. Using your computer 35
11. Click Browse my computer for driver software, and then click Let me pick from a list of device drivers on my computer.
12. Clear the Show compatible hardware check box.
13. Select Manufacturer and Model for your monitor. If you cannot find your monitor on the list, stop the installation of this driver and use the driver shipped with your monitor.
14. After updating the driver, click Close.
15. For the Windows 7 operating system, to change the color settings, right-click on the desktop, and click Screen resolution. Click Advanced Settings, select the Monitor tab, then set Colors.
16. Click OK.
Note: To change the color settings, right-click on the desktop, and click Screen resolution. Click Advanced Settings, select the Monitor tab, then set Colors.
Considerations for attaching an external monitor When installing an operating system, you must install the display driver for your monitor that is supplied
with the computer, and the monitor INF file that is supplied with the external monitor.
If you set a resolution higher than the resolution you are using on the computer monitor, and use an external monitor that does not support that resolution, take advantage of the virtual screen function, which enables you to display only a part of the high-resolution screen image your computer produces. You can see other parts of the image by moving the screen with the TrackPoint pointing device or another pointing device.
If the external monitor you are using is outdated, the resolution and the refresh rate might be limited.
Using the Mini DisplayPort connector Your computer has a Mini DisplayPort connector, the latest digital display interface for connection to various external devices, such as CRT monitors, projectors, or even high-definition televisions. This compact connector enables a plug-and-play setup and supports adapters that can plug into DVI, VGA, or HDMI connectors.
Using dual displays This section introduces the Extend desktop function that enables you to display output (the same or different) on both the computer display and an external monitor.
Using the Extend desktop function
Your computer supports a function named the Extend desktop. With the Extend desktop function, you can display output on both the computer display and an external monitor. You also can display different desktop images on each monitor.
You can use the Extend desktop function without changing any settings. If the function does not work, refer to Enabling the Extend desktop function on page 37 to enable it.
Considerations for using the Extend desktop function
If you want to show DOS full-screen while in the Extend desktop mode, only the primary display shows DOS; the other display is blacked out.
If your computer has the Intel graphics card, you can designate the other display as the primary display by doing the following:
1. Right-click on the desktop and select Screen Resolution.
2. Click the desired display image and select the Make this my main display check box.
3. Click OK.
36 User Guide
When an application using DirectDraw or Direct3D is played in full-screen mode, it is shown only on the primary display.
You cannot use the display switching function when you are in the Extend desktop mode.
Enabling the Extend desktop function
To enable the Extend desktop function, do the following:
1. Connect the external monitor to the monitor connector; then connect the monitor to an electrical outlet.
2. Turn on the external monitor.
3. Press Fn+F7, then select Extend.
To change the resolution for each monitor, do the following:
1. Right-click on the desktop, and click Screen resolution.
2. Click the Monitor-1 icon (for the primary display, the computer display).
3. Set the resolution for the primary display.
4. Click the Monitor-2 icon (for the secondary display, the external display).
5. Set the resolution for the secondary display.
6. Click Advanced settings and set up the color quality on the Monitor tab.
7. Click OK to apply the changes.
Note: To change the color settings, right-click on the desktop, and click Screen resolution. Click Advanced Settings, select the Monitor tab, then set Colors.
Using audio features Your computer is equipped with the following:
Combo audio jack, 1/8 inch (3.5 mm) in diameter
Speakers
Dual array digital microphone
Your computer also has an audio chip that enables you to enjoy various multimedia audio features, such as the following:
Recording and playback of PCM and WAV files
Playback of MIDI and MP3 files
Recording from various sound sources, such as a headset attached
The following table shows which functions of the audio devices attached to the jacks on your computer are supported.
Table 3. Audio feature list
Jack Headset with a 3.5 mm 4-pole plug
Conventional headphone Conventional microphone
Combo audio jack Headphone and microphone functions supported
Headphone function supported
Not supported
To configure the microphone for optimized sound recording, use the Realtek HD Audio Manager program. To start the program, go to Control Panel and click Hardware and Sound Realtek HD Audio Manager.
Chapter 2. Using your computer 37
Using the camera If your computer has a camera, you can use the camera to preview your video image and take a snapshot of your current image.
To start the camera, do the following:
For Windows 7: Press Fn+F6 to open the Communications settings window.
For Windows 8: Press Fn+F6 to start the Lenovo Settings program. Then click Camera.
When the camera is started, the green camera-in-use indicator turns on.
You also can use the camera with other programs that provide features such as photographing, video capturing, and video conferencing. To use this with other programs, open one of the programs and start the photographing, video capturing, or video conferencing function. Then, the camera will start automatically and the green camera-in-use indicator will turn on. For more information about using the camera with a program, refer to the help information system of the program.
Configuring camera settings
You can configure the camera settings to meet your needs, such as adjusting the quality of the video output.
To configure the camera settings, do the following:
For Windows 7: Press Fn+F6. The Communications settings window opens. Click the Manage Settings button and configure the camera settings as desired.
For Windows 8, do one of the following:
Configure the camera settings directly from the program that is using the camera. For details, see the help information system of the program.
Click Lenovo Settings from the Start screen. Then click Camera. Follow the instructions on the screen to configure the camera settings as desired.
Using a flash media card Your computer supports a media card reader slot. It supports the following cards:
Secure Digital (SD) card
Secure Digital High-Capacity (SDHC) card
Secure Digital eXtended-Capacity (SDXC) card
MultiMediaCard (MMC)
Notes:
Your computer does not support the CPRM feature for the SD card.
While transferring data to or from a flash media card, such as an SD card, do not put your computer into sleep or hibernation mode before the data transfer is complete; otherwise, your data could become damaged.
Installing a flash media card
Attention: Before you start installing a card, touch a metal table or a grounded metal object. This action reduces any static electricity from your body. The static electricity could damage the card.
To install a card, do the following:
1. Make sure the metal contacts of the card are facing down and pointing toward the card slot.
38 User Guide
2. Press the card firmly into the card slot.
If the plug-and-play feature is not enabled for the installed flash media card, do the following to enable the feature:
1. Open Control Panel.
2. Click Hardware and Sound.
3. Click Device Manager. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
4. From the Action menu, select Add legacy hardware. The Add Hardware Wizard starts.
5. Follow the instructions on the screen.
Removing a flash media card
Attention:
Before removing a card, stop the card first. Otherwise, data on the card might be corrupted or lost.
Do not remove a card while the computer is in sleep mode or hibernation mode. Otherwise, the system might not respond when you try to resume operation.
To remove a card, do the following:
1. Click the triangular icon in the Windows notification area to show hidden icons. Then, right-click the Safely Remove Hardware and Eject Media icon.
2. Select the item you want to remove to stop the card.
3. Press the card to eject it from your computer.
4. Remove the card and store it safely for future use.
Note: If you do not remove the card from your computer after you eject the card from the Windows operating system, the card can no longer be accessed. To access the card, you must remove it first, then insert it again.
Chapter 2. Using your computer 39
40 User Guide
Chapter 3. You and your computer
This chapter provides information about accessibility, comfort, and travelling with your computer.
This chapter contains the following topics:
Accessibility and comfort on page 41
Traveling with your computer on page 43
Accessibility and comfort Good ergonomic practice is important to get the most from your personal computer and to avoid discomfort. Arrange your workplace and the equipment you use to suit your individual needs and the kind of work that you perform. In addition, use healthy work habits to maximize your performance and comfort while using your computer.
The following topics provide information about arranging your work area, setting up your computer equipment, and establishing healthy work habits.
Lenovo is committed to providing the latest information and technology to our customers with disabilities. Refer to our accessibility information which outlines our efforts in this area.
Ergonomic information Working in the virtual office might mean adapting to frequent changes in your environment. Following some simple rules will make things easier and bring you the maximum benefits of your computer. Keeping in mind such basics as good lighting and proper seating, for example, can help you improve your performance and achieve greater comfort.
This example shows someone in a conventional setting. Even when not in such a setting, you can follow many of these tips. Develop good habits, and they will serve you well.
General posture: Make minor modifications in your working posture to deter the onset of discomfort caused by long periods of working in the same position. Frequent, short breaks from your work also help to prevent minor discomfort associated with your working posture.
Copyright Lenovo 2012 41
Display: Position the display to maintain a comfortable viewing distance of 510-760 mm (20-30 inches). Avoid glare or reflections on the display from overhead lighting or outside sources of light. Keep the display screen clean and set the brightness to levels that enable you to see the screen clearly. Press Fn+F8 or Fn+F9 to adjust display brightness.
Head position: Keep your head and neck in a comfortable and neutral (vertical, or upright) position.
Chair: Use a chair that gives you good back support and seat height adjustment. Use chair adjustments to best suit your desired posture.
Arm and hand position: If available, use chair arm rests or an area on your working surface to provide weight support for your arms. Keep your forearms, wrists, and hands in a relaxed and neutral (horizontal) position. Type with a soft touch without pounding the keys.
Leg position: Keep your thighs parallel to the floor and your feet flat on the floor or on a footrest.
What if you are traveling?
It might not be possible to observe the best ergonomic practices when you are using your computer while on the move or in a casual setting. Regardless of the setting, try to observe as many of the tips as possible. Sitting properly and using adequate lighting, for example, will help you maintain desirable levels of comfort and performance.
Questions about vision?
The visual display screens of ThinkPad notebook computers are designed to meet the highest standards and to provide you with clear, crisp images and large, bright displays that are easy to see, yet easy on the eyes. Of course, any concentrated and sustained visual activity can be tiring. If you have questions on eye fatigue or visual discomfort, consult a vision care specialist for advice.
Comfort Observe the following guidelines to achieve greater comfort and improve performance.
Active sitting and rest breaks: The longer you sit and work with your computer, the more important it is to observe your working posture. Follow Ergonomic information on page 41 and practice active sitting to avoid discomfort associated with your working postures. Making minor voluntary postural changes and taking short frequent work breaks are the key ingredients for healthy computing. Your computer is light and mobile; you can easily reposition your working surface to accommodate many posture modifications.
Work area setup options: Familiarize yourself with all of your office furniture so that you know how to adjust your work surface, seat, and other work tools to accommodate your preferences for comfort. If your work area is not in an office setting, be sure to take special note of employing active sitting and taking work breaks. Many ThinkPad product solutions are available to help you modify and expand your computer to best suit your needs. Access the following Web site to view some of these options: http://www.lenovo.com/accessories/services/index.html. Explore your options for external products that provide the adjustability and features that you want.
Accessibility information Lenovo is committed to providing people with disabilities greater access to information and technology. As a result, the following information provides ways to help users that have hearing, vision, and mobility limitations get the most out of their computer experience.
42 User Guide
Assistive technologies enable users to access information in the most appropriate way. Some of these technologies are already provided in your operating system. Others can be purchased through vendors, or accessed through the World Wide Web http://www.lenovo.com/healthycomputing.
Assistive technologies Some accessibility technologies are available through the Accessibility Options program. Depending on your operating system, the number of accessibility options available varies. In general, accessibility options enhance the way users with hearing, vision, or mobility limitations navigate and use their computer. For example, some users might not have the fine motor skills required to use a mouse or select key combinations. Other users might require larger fonts or high-contrast display modes. In some cases, magnifiers and built-in speech synthesizers are available. For detailed information about each of these features, consult the Microsoft help information system.
To use the Accessibility Options program, open Control Panel and click Ease of Access Ease of Access Center.
Screen-reader technologies Screen-reader technologies are primarily focused on software application interfaces, help information systems, and a variety of online documents. However, in the case where a screen reader cannot read documents, the document must first go through a conversion process. One solution converts Adobe PDF files into a format that is read by the screen-reader programs. This solution is a Web-based service provided by Adobe Systems Incorporated. Through http://access.adobe.com, Adobe PDF documents can be converted to HTML or plain text in many languages. One conversion option converts PDF documents on the Internet. A second option enables users to submit the URL of an Adobe PDF file through e-mail to convert it to HTML or ASCII text. Adobe PDF files on a local solid-state drive, local CD-ROM, or LAN also can be converted by attaching the Adobe PDF file to an e-mail message.
Traveling with your computer This topic provides information to help you work with your computer when you are travelling.
Travel tips Use the following travel tips to travel more confidently and efficiently with your computer.
Although it is safe to allow your computer to go through the x-ray machines at airport security stations, it is important to keep your eyes on the computer at all times to prevent theft.
Consider bringing an electrical adapter for use in an airplane or automobile.
If you carry an ac power adapter, detach the ac cord from it to avoid damaging the cord.
Travel tips on airplanes
If you carry your computer into an airplane, take note of the following tips:
If you intend to use your computer or wireless services (such as Internet and Bluetooth), check with the airline for restrictions and availability of services before boarding the airplane. If there are restrictions on the use of computers with wireless features on the airplane, you must abide by those restrictions. If necessary, disable wireless features before boarding.
Be careful about the seat in front of you on airplanes. Angle your computer display so that it does not get caught when the person in front of you leans back.
When taking off, remember to turn off your computer or put it into hibernate mode.
Travel accessories The following is a checklist of items to consider packing when you are going to travel:
Chapter 3. You and your computer 43
ThinkPad ac power adapter
ThinkPad AC/DC Combo Adapter
Lenovo USB 2.0 Ethernet Adapter
Mini-DisplayPort to VGA adapter
External mouse, if you are accustomed to using one
A quality carrying case that provides adequate cushion and protection
External storage device
If you are traveling to another country, you might want to consider this item:
An ac power adapter for the country to which you are travelling
To purchase travel accessories, go to http://www.lenovo.com/accessories.
44 User Guide
Chapter 4. Security
This chapter provides information about how to protect your computer from theft and unauthorized use.
Attaching a mechanical lock on page 45
Using passwords on page 45
Solid-state drive security on page 50
Setting the security chip on page 50
Using a fingerprint reader on page 51
Notice on deleting data from your solid-state drive on page 55
Using firewalls on page 56
Protecting data against viruses on page 56
Attaching a mechanical lock You can attach a mechanical lock to your computer, to help prevent it from being removed without your permission.
Attach a mechanical lock to the keyhole of the computer; then secure the chain on the lock to a stationary object. Refer to the instructions shipped with the mechanical lock.
Note: You are responsible for evaluating, selecting, and implementing the locking devices and security features. Lenovo makes no comments, judgments, or warranties about the function, quality, or performance of locking devices and security features.
Using passwords By using passwords, you can help prevent your computer from being used by others. Once you set a password, a prompt is displayed on the screen each time you turn on the computer. Enter your password at the prompt. You cannot use the computer unless you type the correct password.
Passwords and sleep mode If you have set passwords and you put your computer into sleep mode by pressing Fn+F4:
You are not prompted to type the password when resuming operation.
If the solid-state drive has a hard disk password, it is unlocked automatically when you resume operation.
Note: If a Windows password has been set, you will be prompted to enter it.
Typing passwords
If this icon is displayed, type a power-on password or a supervisor password.
If this icon is displayed, type a user hard disk password. If you want to type a master hard disk password, do the following:
1. Press F1. The icon changes to this:
Copyright Lenovo 2012 45
2. Type the master hard disk password.
Note: To return to the icon , press F1 again.
If this icon is displayed, type a supervisor password.
Power-on password You can set a power-on password to help protect your computer against access by unauthorized users.
If you set a power-on password, the password prompt is displayed on the screen whenever you turn on the computer. You must enter the correct password to start using the computer.
Setting a power-on password
1. Print these instructions.
2. Save all open files, and exit all programs.
3. Turn your computer off and then turn it on again.
4. When the logo screen is displayed, press F1. The ThinkPad Setup program main menu opens.
5. Select Security, using the cursor directional keys to move down the menu.
6. Select Password.
7. Select Power-on Password.
8. In the Enter New Password field, type a desired password, and press Enter.
9. In the Confirm New Password field, retype the password and press Enter.
Note: You might want to record your password and store it in a safe place. Otherwise, if you forget it, you have to take your computer to a Lenovo reseller or a marketing representative to have the password canceled.
10. In the Setup Notice window that is displayed, press Enter to continue.
11. Press F10. The Setup Confirmation window opens. Select Yes to save configuration changes and exit.
Changing or removing the power-on password
To change the power-on password, follow steps 1 through 7. Enter your current password. When the Enter New Password field is displayed, type a new password in the field and then retype it to verify. To remove the password, follow steps 1 through 7. Type your current password. When the Enter New Password field is displayed, leave it blank and press Enter twice.
Hard disk passwords Two types of hard disk passwords help protect the information stored on the solid-state drive:
User hard disk password
Master hard disk password, which requires a user hard disk password
If a user hard disk password has been set, but no master hard disk password has been, the user must enter the user hard disk password in order to gain access to files and applications on the solid-state drive.
The master password can be set and used only by a system administrator. Like a master key, it enables the administrator to get access to the solid-state drive in a system. The administrator sets the master password; no one else knows it. Then the administrator sets a user password for each computer in the network, and
46 User Guide
tells each user the password for his or her computer. The user can then change the user password as desired, but the administrator still can get access by using the master password.
Note: When a master hard disk password is set, only the administrator can remove the user hard disk password.
Setting a hard disk password
1. Print these instructions.
2. Save all open files, and exit all applications.
3. Turn your computer off and then on again.
4. When the logo screen is displayed, press F1. The ThinkPad Setup program main menu opens.
5. Select Security, using the cursor directional keys to move down the menu.
6. Select Password.
7. Select Hard Disk 1 Password.
8. A password window opens. You are prompted to select User or User + Master. Select User if you want to set only one hard disk password. If you are an administrator or supervisor, you can select User + Master to set two passwords. (The user can change the user password later.)
If you select User + Master, do the following:
a. When a window for typing the new user hard disk password opens, type your new password in the Enter New Password field. Press Enter.
b. In the Confirm New Password field, retype the password you just entered to verify it. Press Enter.
c. A message window opens and prompts you to set the master hard disk password. Press Enter to continue.
d. A window for typing the new master hard disk password opens. Type your new password in the Enter New Password field. Press Enter.
e. In the Confirm New Password field, retype the password you just entered to verify it. Press Enter.
If you select User only, do the following:
a. When a window for typing the new password opens, type your new password in the Enter New Password field. Press Enter.
Notes:
You can set the minimum length of a hard disk password through the Security menu.
If you set a hard disk password of over seven characters, the solid-state drive can be used only with a computer that can recognize a hard disk password of over seven characters. If you then install the solid-state drive in a computer that cannot recognize a hard disk password that contains more than seven characters, you cannot get access to the drive.
b. In the Confirm New Password field, retype the password you just entered to verify it. Press Enter.
Attention: You might want to record your passwords and store them in a safe place. Otherwise, if you forget the user password, or both user and master passwords, Lenovo cannot reset your passwords or recover data from the solid-state drive. You must take your computer to a Lenovo reseller or a marketing representative to have the solid-state drive replaced. Proof of purchase is required, and a fee will be charged for parts and service.
9. In the Setup Notice window that is displayed, press Enter to continue.
10. Press F10. The Setup Confirmation window opens. Select Yes to save configuration changes and exit.
The next time you turn on your computer, you will have to type the user or master hard disk password in order to start your computer and get access to your operating system.
Chapter 4. Security 47
Changing or removing a hard disk password
Follow steps 1 through 7 in Setting a hard disk password on page 47, typing your password to get access to the ThinkPad Setup program.
To change or remove the user hard disk password, do the following:
To change the hard disk password, type the current password in the Enter Current Password field. Then type the new password in the Enter New Password field, and retype the password you just entered to verify it in the Confirm New Password field. Press Enter, and a Setup Notice window is displayed. Press Enter to exit from the Setup Notice window. The user hard disk password will be changed.
To remove the hard disk password, type the current password in the Enter Current Password field. Then leave the Enter New Password and Confirm New Password fields blank, and press Enter. A Setup Notice window is displayed. Press Enter to exit from the Setup Notice window. The user hard disk password will be removed.
To change or remove the User + Master hard disk passwords, select User HDP or Master HDP.
Select Master HDP, do the following:
To change the master hard disk password, type the current master hard disk password in the Enter Current Password field. Then type the new master hard disk password in the Enter New Password field, and retype the password you just entered to verify it in the Confirm New Password field. Press Enter, and a Setup Notice window is displayed. Press Enter to exit from the Setup Notice window. The master hard disk password is changed.
To remove the master hard disk password, type the current master hard disk password in the Enter Current Password field. Then leave the Enter New Password and Confirm New Password fields blank, and press Enter. A Setup Notice window is displayed. Press Enter to exit from the Setup Notice window. Both the user and master hard disk passwords will be removed.
Supervisor password The supervisor password protects the system information stored in ThinkPad Setup. Without it, no one can change the configuration of the computer. It provides the following security features:
If a supervisor password is set, a password prompt is displayed when you try to start the ThinkPad Setup program. Unauthorized users cannot get access to configuration data.
The system administrator can use the supervisor password to get access to a computer even if the user of that computer has set a power-on password. The supervisor password overrides the power-on password.
If both a supervisor password and a power-on password are set, you can do the following only if you have the supervisor password:
Deleting the power-on password
Changing or deleting the supervisor password
Changing date and time
Enabling or disabling the Lock UEFI BIOS Settings feature
Enabling or disabling the Password at unattended boot feature
Specifying the minimum length for power-on passwords and hard disk passwords
Changing the setting for the security chip
Enabling or disabling the Boot Device List F12 Option feature
Enabling or disabling the Boot Order Lock feature
Enabling or disabling the Flash BIOS Updating by End-Users feature
Enabling or disabling the internal wireless device
48 User Guide
Enabling or disabling the internal Bluetooth device
Enabling or disabling the internal wireless WAN device
Enabling or disabling the Security mode
Enabling or disabling the fingerprint reader priority
Erasing the fingerprint data
Notes:
The system administrator can set the same supervisor password on many ThinkPad notebook computers to make administration easier.
By enabling the Lock UEFI BIOS Settings feature on the Password menu when you set the supervisor password, you make it impossible for anyone but you to make changes.
Setting, changing, or removing a supervisor password
Only a system administrator can set, change, or remove a supervisor password.
To set, change, or remove a supervisor password, do the following:
1. Print these instructions.
2. Save all open files, and exit all applications.
3. Turn your computer off and then turn it on again.
4. When the logo screen is displayed, press F1. The ThinkPad Setup program main menu opens.
5. Select Security, using the cursor directional keys to move down the menu.
6. Select Password.
7. Select Supervisor Password.
8. A window opens, prompting you to enter a new password. Depending on your needs, do one of the following:
To set a password, do the following:
a. In the Enter New Password field, type a desired password and press Enter.
b. In the Confirm New Password field, retype the password and press Enter.
To change a password, do the following:
a. In the Enter Current Password field, type the current supervisor password and press Enter.
b. In the Enter New Password field, type the new supervisor password; then retype the password you just entered to verify it in the Confirm New Password field. Press Enter.
To remove a password, do the following:
a. In the Enter Current Password field, type the current supervisor password and press Enter.
b. Leave the Enter New Password and Confirm New Password fields blank. Press Enter.
Attention: You might want to record your password and store it in a safe place. If you forget your supervisor password, Lenovo cannot reset your password. You must take your computer to a Lenovo reseller or a Lenovo marketing representative to have the system board replaced. Proof of purchase is required, and a fee will be charged for parts and service.
9. In the Setup Notice window that is displayed, press Enter to continue.
10. Press F10. The Setup Confirmation window opens. Select Yes to save configuration changes and exit.
The next time you open the ThinkPad Setup program, you will be prompted to type your password to proceed.
Chapter 4. Security 49
Solid-state drive security To protect passwords from unauthorized security attacks, several of the latest technologies and algorithms are integrated into UEFI BIOS and hardware design of ThinkPad notebook computers.
To maximize security, do the following:
1. Set a power-on password as well as a hard disk password for your internal solid-state drive. Refer to the procedures in Power-on password on page 46 and Hard disk passwords on page 46. For security, a longer password is recommended.
2. To provide reliable security for UEFI BIOS, use the security chip and a security program with a Trusted Platform Module management feature. Refer to Setting the security chip on page 50.
Note: The Microsoft Windows 7 and Windows 8 operating system support the TPM management feature.
3. If a solid-state drive equipped with Encryption features is installed in your computer, be sure to protect the contents of your computer memory from unauthorized access by use of drive encryption software, such as Microsoft Windows BitLocker Drive Encryption. See Using Windows BitLocker Drive Encryption on page 50.
4. Before you dispose of, sell, or hand over your computer, be sure to delete data stored on it. Refer to Notice on deleting data from your solid-state drive on page 55.
Note: The solid-state drive built into your computer can be protected by UEFI BIOS.
Using Windows BitLocker Drive Encryption
To help protect your computer against unauthorized access, be sure to use drive encryption software, such as Windows BitLocker Drive Encryption.
Windows BitLocker Drive Encryption is an integral security feature of Windows 7 and and Windows 8 operating systems. It is supported in the Ultimate and Enterprise editions of the Windows 7 operating system and Windows 8 operating system. It can help you protect the operating system and data stored on your computer, even if your computer is lost or stolen. BitLocker works by encrypting all user and system files, including the swap and hibernation files.
BitLocker uses a Trusted Platform Module to provide enhanced protection for your data and to ensure early boot component integrity. A compatible TPM is defined as a V1.2 TPM.
To check the BitLocker status, go to Control Panel and click System and Security BitLocker Drive Encryption.
For details about Windows BitLocker Drive Encryption, see the help information system of the Windows operating system, or search for Microsoft Windows BitLocker Drive Encryption Step-by-Step Guide on the Microsoft Web site.
Setting the security chip Strict security requirements are imposed on network client computers that transfer confidential information electronically. Depending on the options you ordered, your computer might have an embedded security chip, a cryptographic microprocessor. With the security chip and Client Security Solution, you can do the following:
Protect your data and system
Strengthen access controls
Secure communications
50 User Guide
Setting the security chip
The choices offered on the Security Chip submenu under the Security menu of ThinkPad Setup are as follows:
Security Chip: activate, inactivate, or disable the security chip.
Security Reporting Options: enable or disable each security reporting option.
Clear Security Chip: clear the encryption key.
Notes:
1. Ensure that the supervisor password has been set in ThinkPad Setup. Otherwise anyone can change the settings for the security chip.
2. If you are using Client Security Solution, handle the security chip by doing the following:
Do not clear the security chip. If you do, the functions assigned to the keys will be erased.
Do not disable the security chip. If you do, Client Security Solution will not work.
3. If the security chip is removed or replaced, or a new one has been added, the computer will not start. You will hear four cycles of four beeps each, or you see error message 0176 or 0192.
4. If the security chip is inactive or disabled, the Clear Security Chip option will not be displayed.
5. When you clear the security chip, be sure to turn your computer off and then turn it on again after you set the security chip to Active. Otherwise, the Clear Security Chip option is not displayed.
To set an item on the Security Chip submenu, do the following:
1. Print these instructions.
2. Save all open files, and exit all programs.
3. Turn your computer off and then turn it on again.
4. When the logo screen is displayed, press F1. The ThinkPad Setup program main menu opens.
5. Using the cursor keys, move to Security. The Security menu opens.
6. Using the cursor keys, move to Security Chip, and press Enter. The Security Chip submenu opens.
7. Using the cursor keys, move to an item you want to set. When the item is highlighted, press Enter.
8. Set other items that you want to set.
9. Press F10 to save changes and exit.
10. Press Enter in the Setup Confirmation window to confirm the exit.
To set the security chip, you have to start Client Security Solution, and follow the instructions on the screen.
Note: Client Security Solution is not preinstalled on Windows 7 and Windows 8 models. To configure the security chip, you need to download the latest version of Client Security Solution from the Lenovo Web site. To download Client Security Solution, go to http://www.lenovo.com/support. Then follow the instructions on the screen.
Using a fingerprint reader Depending on the options you ordered, your computer may have an integrated fingerprint reader. By enrolling your fingerprint and associating it with a power-on password, a hard disk password, or both passwords beforehand, you can start the computer, log on to the system, and enter the ThinkPad Setup by swiping your finger over the reader, without typing a password. Thus fingerprint authentication can replace passwords and enable simple and secure user access.
Chapter 4. Security 51
Enrolling your fingerprint
1. Turn on your computer.
2. To start Lenovo Fingerprint software, refer to Lenovo programs on page 12.
3. Follow the instructions on the screen to enroll your fingerprint. For details, refer to the Help for the program.
LED behavior of the fingerprint reader
Note: Your computer might have slight variations from the following illustration.
Table 4. LED behavior of fingerprint reader
Indicator Description
Steady green The fingerprint reader is ready to swipe.
Blinking green once The fingerprint is being authenticated or has been authenticated.
Blinking green The fingerprint reader is ready to swipe in power-on authentication state.
Blinking amber The fingerprint could not be authenticated.
Steady amber for 15 seconds The power-on authentication feature is disabled after three bad fingerprint swipes.
Swiping your finger over the reader
To swipe your finger over the reader, do as follows:
52 User Guide
1. Place the ball of your finger that is, the central part of the fingerprint on the small circle above the reader. Ensure that the entire top joint of the finger is on the reader.
Note: Your computer might have slight variations from the following illustration.
2. Apply light pressure and swipe your finger across the reader in one smooth motion.
Note: Your computer might have slight variations from the following illustration.
Logging on to the system
After you enroll your fingerprint, log on to the system as follows:
1. Set a power-on password or a hard disk password, or both.
2. Turn your computer off and then on again.
3. When prompted, swipe your finger over the reader.
4. On request, type your power-on password, your hard disk password, or both. The enrolled fingerprint is now associated with your power-on password, your hard disk password, or both.
Chapter 4. Security 53
The next time you start the computer, you can log on to the system by swiping your finger over the reader once.
Attention: If you always use your fingerprint to log on to the system, you may forget your password. Write down your password, and keep it in a safe place. If you forget it and for some reason you cannot swipe your finger across the readerfor example, if you injure that fingeryou cannot start the computer or change the password.If you forget your power-on password, you must take your computer to a Lenovo authorized servicer or a marketing representative to have the password canceled.
If you forget your hard disk password, Lenovo cannot reset your password or recover data from the solid-state drive. You must take your computer to a Lenovo authorized servicer or a marketing representative to have the solid-state drive replaced. Proof of purchase is required, and a fee will be charged for parts and service.
Setting the fingerprint reader
If you want to change the settings of the fingerprint reader, follow the procedure below.
The fingerprint submenu under the Security menu of the ThinkPad Setup offers the following choices:
Predesktop Authentication: Enables or disables fingerprint authentication before the operating system is loaded.
Reader Priority: Defines the priority for fingerprint readers if an external fingerprint reader is attached.
Security Mode: Specifies the settings of the security mode.
Password Authentication: Enables or disables password authentication.
Note: This item appears if High security mode is selected.
Reset Fingerprint Data: By choosing this item, you erase all of the fingerprint data stored in either the internal or external fingerprint reader.
To set an item in the fingerprint submenu:
1. Print these instructions. To configure the fingerprint reader, you must turn your computer off and then on again.
2. Save all open files, and exit all programs.
3. Turn your computer off and then on again.
4. When the logo screen is displayed, press F1. The ThinkPad Setup opens.
5. Using the cursor keys, move to Security, and press Enter. The Security menu opens.
6. Using the cursor keys, move to Fingerprint, and press Enter. The Fingerprint submenu opens.
7. Using the cursor keys, move to an item you want to set. When that item is highlighted, press Enter.
8. Set the items you want to set.
9. Press F10 to exit.
10. In the Setup Confirmation window, select Yes.
Care for the fingerprint reader
The following actions could damage the fingerprint reader or cause it not to work properly:
Scratching the surface of the reader with a hard, pointed object.
Scraping the surface of the reader with your fingernail or anything hard.
Using or touching the reader with a dirty finger.
54 User Guide
If you notice any of the following conditions, gently clean the surface of the reader with a dry, soft, lint-free cloth:
The surface of the reader is dirty or stained.
The surface of the reader is wet.
The reader often fails to enroll or authenticate your fingerprint.
If your finger has any of the following conditions, you may not be able to register or authenticate it:
Your finger is wrinkled.
Your finger is rough, dry, or injured.
Your finger is very dry.
Your finger is stained with dirt, mud, or oil.
The surface of your finger is very different from when you enrolled your fingerprint.
Your finger is wet.
A finger is used that has not been enrolled.
To improve the situation, try the following:
Clean or wipe your hands to remove any excess dirt or moisture from the fingers.
Enroll and use a different finger for authentication.
If your hands are too dry, apply lotion to them.
Notice on deleting data from your solid-state drive As computers spread into every corner of life, they process more and more information. The data on your computer, some of which might be sensitive, is stored on the solid-state drive. Before you dispose of, sell, or hand over your computer, be sure to delete data stored on it.
Handing your computer over to someone else without deleting the loaded software, such as operating systems and program, might even violate license agreements. You are advised to check the terms and conditions of those license agreements.
There are methods that seem to delete the data:
Move the data to the recycle bin, and then empty the recycle bin.
Use the Delete option.
Format your solid-state drive, using the software for initializing it.
Using the recovery program to set the hard disk drive back to the factory default settings.
These operations, however, only change the file allocation of the data; they do not delete the data itself. In other words, the data retrieval processing is disabled under an operating system such as Windows. The data is still there, even though it seems to be lost. Thus, it is sometimes possible to read the data by use of special software for data recovery. There is a risk that this data can be retrieved and used for unexpected purposes.
To prevent leakage of data, it becomes very important that you take responsibility for deleting all the data from the solid-state drive when you dispose of, sell, or hand over your computer. You can destroy the data physically by smashing the solid-state drive with a hammer, or magnetically by means of strong magnetic power, thus making the data unreadable. But we recommend that you make use of the software (payware) or service (pay service) specifically developed for the purpose.
Chapter 4. Security 55
For disposing of data on the solid-state drive, Lenovo provides the Secure Data Disposal tool. To download the tool, go to: http://www.lenovo.com/support .
Note: Running either program will take a couple of hours.
If a solid-state drive equipped with encryption features is supported and installed in your computer, you can logically dispose of all the data on the drive in a very short time by erasing the cryptographic key. The data encrypted with the old key is not physically erased but remains on the drive; however, it cannot be decrypted without the old key. This feature is enabled by ThinkPad Setup Menu Extension Utility and is available as a menu item in ThinkPad Setup.
Using firewalls If your system is preinstalled with a firewall program, it protects against computer Internet security threats, unauthorized accesses, intrusions, and Internet attacks. It also protects your privacy.
For more information about how to use the firewall program, refer to the help information system that comes with the program.
Protecting data against viruses Your computer is preinstalled with an antivirus program so you can detect and eliminate viruses. The antivirus program is designed to help you detect and eliminate viruses.
Lenovo provides a full version of antivirus software on your computer with a free 30-day subscription. After 30 days, you must renew the license to continue receiving the antivirus software updates.
For more information about how to use your antivirus software, refer to the help information system of your antivirus software.
56 User Guide
Chapter 5. Recovery overview
This chapter provides information about the recovery solutions on computers preinstalled with the Windows 7 operating system or the Windows 8 operating system.
Recovery overview for Windows 7 models on page 57
Recovery overview for Windows 8 models on page 62
Recovery overview for Windows 7 models This section provides information about the recovery solutions provided by Lenovo on computers preinstalled with the Windows 7 operating system.
Notes:
There are a variety of methods to choose from when considering how to recover in the event of a software- or hardware-related problem. Some methods vary depending on the type of your operating system.
The product on the recovery media might be used only for the following purposes:
Restore the product preinstalled on your computer
Reinstall the product
Modify the product using the Additional Files
Notes: To prevent potential performance risks or unexpected behavior that might be caused by the new hard disk drive technology, it is recommended that you use one of the following back-up software programs:
ThinkVantage Rescue and Recovery version 4.3 or later
Symantec Norton Ghost version 15 or later
Notes: To use this program, do the following:
1. Click Start Run. The Run window opens.
2. Type cmd in the field. Then click OK.
3. Type ghost -align=1mb and press Enter.
Acronis True Image 2010 or later
Paragon Backup & Recovery 10 Suit or later, Paragon Backup & Recovery 10 Home or later
Creating and using recovery media You can use recovery media to restore the solid-state drive to the factory default settings. Recovery media are useful if you transfer the computer to another area, sell the computer, recycle the computer, or put the computer in an operational state after all other methods of recovery have failed. As a precautionary measure, it is important to create recovery media as early as possible.
Note: The recovery operations you can perform using recovery media vary depending on the operating system from which the recovery media were created. The recovery media might contain a boot medium and a data medium. Your Microsoft Windows license permits you to create only one data medium, so it is important that you store the recovery media in a safe place after you have made them.
Creating recovery media
This section provides instructions on how to create recovery media.
Copyright Lenovo 2012 57
Note: You can create recovery media using discs or external USB storage devices.
To create recovery media , click Start All Programs Lenovo ThinkVantage Tools Factory Recovery Disks. Then, follow the instructions on the screen.
Using recovery media
This section provides instructions on how to use recovery media.
You can use recovery media to restore the computer to the factory default settings only. You can use recovery media to put the computer in an operational state after all other methods of recovery have failed.
Attention: When you use recovery media to restore the computer to the factory default settings, all the files currently on the solid-state drive will be deleted and replaced by the factory default settings.
To use recovery media, do the following:
1. Depending on the type of your recovery media, connect the boot medium (memory key or other USB storage device) to the computer, or insert the boot disc into the optical drive.
2. Repeatedly press and release the F12 key when turning on the computer. When the Boot Menu window opens, release the F12 key.
3. Select the desired startup device and press Enter. The restore process begins.
4. Follow the instructions on the screen to complete the operation.
Notes:
1. After restoring your computer to the factory default settings, you might have to reinstall device drivers for some devices. See Reinstalling preinstalled applications and device drivers on page 61.
2. Some computers come with Microsoft Office or Microsoft Works preinstalled. If you need to recover or reinstall your Microsoft Office or Microsoft Works applications, you must use the Microsoft Office CD or Microsoft Works CD. These discs are provided only with computers preinstalled with Microsoft Office or Microsoft Works.
Performing backup and recovery operations The Rescue and Recovery program enables you to back up all your solid-state drive contents including the operating system, data files, software programs, and personal settings. You can designate where the Rescue and Recovery program stores the backup:
In a protected area of your solid-state drive
On an attached external USB hard disk drive
On a network drive
On recordable discs (a recordable optical drive is required for this option)
After you have backed up the contents on the solid-state drive, you can restore the complete contents of the solid-state drive, restore only the selected files, or restore only the Windows operating system and applications.
Performing a backup operation
This section provides instructions on how to perform a backup operation using the Rescue and Recovery program on different operating systems.
To perform a backup operation using the Rescue and Recovery program, do the following:
1. From the Windows desktop, click Start All Programs Lenovo ThinkVantage Tools Enhanced Backup and Restore. The Rescue and Recovery program opens.
58 User Guide
2. In the Rescue and Recovery main window, click the Launch advanced Rescue and Recovery arrow.
3. Click Back up your hard drive and select backup operation options. Then, follow the instructions on the screen to complete the backup operation.
Performing a recovery operation
This section provides instructions on how to perform a recovery operation using the Rescue and Recovery program on different operating systems.
To perform a recovery operation using the Rescue and Recovery program, do the following:
1. From the Windows desktop, click Start All Programs Lenovo ThinkVantage Tools Enhanced Backup and Restore. The Rescue and Recovery program opens.
2. In the Rescue and Recovery main window, click the Launch advanced Rescue and Recovery arrow.
3. Click the Restore your system from a backup icon.
4. Follow the instructions on the screen to complete the recovery operation.
For more information about performing a recovery operation from the Rescue and Recovery workspace, see Using the Rescue and Recovery workspace on page 59.
Using the Rescue and Recovery workspace The Rescue and Recovery workspace resides in a protected, hidden area of your solid-state drive that operates independently from the Windows operating system. This enables you to perform recovery operations even if you cannot start the Windows operating system. You can perform the following recovery operations from the Rescue and Recovery workspace:
Rescue files from your solid-state drive or from a backup
The Rescue and Recovery workspace enables you to locate files on your solid-state drive and transfer them to a network drive or other recordable media, such as a USB device or a disc. This solution is available even if you did not back up your files or if changes were made to the files since your last backup operation. You also can rescue individual files from a Rescue and Recovery backup located on your local solid-state drive, a USB device, or a network drive.
Restore your solid-state drive from a Rescue and Recovery backup
If you have backed up your solid-state drive using the Rescue and Recovery program, you can restore the solid-state drive from a Rescue and Recovery backup, even if you cannot start the Windows operating system.
Restore your solid-state drive to the factory default settings
The Rescue and Recovery workspace enables you to restore the complete contents of your solid-state drive to the factory default settings. If you have multiple partitions on your solid-state drive, you have the option to restore the factory default settings to the C: partition and leave the other partitions intact. Because the Rescue and Recovery workspace operates independently from the Windows operating system, you can restore the factory default settings even if you cannot start the Windows operating system.
Attention: If you restore the solid-state drive from a Rescue and Recovery backup or restore the solid-state drive to the factory default settings, all files on the primary solid-state drive partition (usually drive C:) will be deleted in the recovery process. If possible, make copies of important files. If you are unable to start the Windows operating system, you can use the rescue files feature of the Rescue and Recovery workspace to copy files from your solid-state drive to other media.
To start the Rescue and Recovery workspace, do the following:
1. Ensure that the computer is turned off.
Chapter 5. Recovery overview 59
2. Repeatedly press and release the F11 key when turning on the computer. When you hear beeps or see a logo screen, release the F11 key.
3. If you have set a Rescue and Recovery password, type your password when prompted. The Rescue and Recovery workspace opens after a short delay.
Note: If the Rescue and Recovery workspace fails to open, see Solving recovery problems on page 62.
4. Do one of the following:
To rescue files from your solid-state drive or from a backup, click Rescue files and follow the instructions on the screen.
To restore your solid-state drive from a Rescue and Recovery backup or to restore your solid-state drive to the factory default settings, click Restore your system and follow the instructions on the screen.
For more information about the features of the Rescue and Recovery workspace, click Help.
Notes:
1. After restoring your solid-state drive to the factory default settings, you might have to reinstall device drivers for some devices. See Reinstalling preinstalled applications and device drivers on page 61.
2. Some computers come with Microsoft Office or Microsoft Works preinstalled. If you need to recover or reinstall your Microsoft Office or Microsoft Works applications, you must use the Microsoft Office CD or Microsoft Works CD. These discs are provided only with computers preinstalled with Microsoft Office or Microsoft Works.
Creating and using a rescue medium With a rescue medium, such as a disc or a USB hard disk drive, you can recover the computer from failures that prevent you from gaining access to the Rescue and Recovery workspace on your solid-state drive.
Notes:
1. The recovery operations you can perform using a rescue medium vary depending on the operating system.
2. The rescue disc can be started in all types of optical drives.
Creating a rescue medium
This section provides instructions on how to create a rescue medium on different operating systems.
To create a rescue medium, do the following:
1. From the Windows desktop, click Start All Programs Lenovo ThinkVantage Tools Enhanced Backup and Restore. The Rescue and Recovery program opens.
2. In the Rescue and Recovery main window, click the Launch advanced Rescue and Recovery arrow.
3. Click the Create Rescue Media icon. The Create Rescue and Recovery Media window opens.
4. In the Rescue Media area, select the type of the rescue medium you want to create. You can create a rescue medium using a disc, a USB hard disk drive.
5. Click OK and follow the instructions on the screen to create a rescue medium.
Using a rescue medium
This section provides instructions on how to use the rescue medium you have created.
If you have created a rescue medium using a disc, use the following instructions to use the rescue medium:
1. Turn off your computer.
60 User Guide
2. Repeatedly press and release the F12 key when turning on the computer. When the Boot Menu window opens, release the F12 key.
3. In the Boot Menu window, select the desired optical drive as the first boot device. Then, insert the rescue disc into the optical drive and press Enter. The rescue medium starts.
If you have created a rescue medium using a USB hard disk drive, use the following instructions to use the rescue medium:
1. Attach the USB hard disk drive to one of the USB connectors on your computer.
2. Repeatedly press and release the F12 key when turning on the computer. When the Boot Menu window opens, release the F12 key.
3. In the Boot Menu window, select the USB hard disk drive as the first boot device and press Enter. The rescue medium starts.
When the rescue medium starts, the Rescue and Recovery workspace opens. The help information for each feature is available from the Rescue and Recovery workspace. Follow the instructions to complete the recovery process.
Reinstalling preinstalled applications and device drivers Your computer has provisions that enable you to reinstall selected factory-installed applications and device drivers.
Reinstalling preinstalled applications
To reinstall selected application programs, do the following:
1. Turn on your computer.
2. Go to the C:\SWTOOLS directory.
3. Open the APPS folder. In it are several subfolders named for the various preinstalled applications.
4. Open the subfolder for the application you are reinstalling.
5. Double-click Setup, and then follow the on-screen steps to reinstall the program.
Reinstalling preinstalled device drivers
Attention: When you reinstall device drivers, you are changing the current configuration of your computer. Reinstall device drivers only when it is necessary to correct a problem with your computer.
To reinstall a device driver for a factory-installed device, do the following:
1. Turn on your computer.
2. Go to the C:\SWTOOLS directory.
3. Open the DRIVERS folder. Within the DRIVERS folder are several subfolders named for the various devices installed in your computer (for example, AUDIO and VIDEO).
4. Open the subfolder for the device.
5. Reinstall the device driver by one of the following methods:
In the subfolder for the device, look for a text file (a file with the extension .txt). The text file contains information on how to reinstall that device driver.
If the subfolder for the device contains a file of setup information (a file with the extension .inf), you can use the Add New Hardware program (in the Windows Control Panel) to reinstall the device driver. Not all device drivers can be reinstalled by use of this program. In the Add New Hardware program, when prompted for the device driver you want to install, click Have Disk and Browse. Then select the device driver file from the device subfolder.
Chapter 5. Recovery overview 61
In the subfolder for the device, look for the executable file (a file with the extension .exe). Double-click the file, and follow the instructions on the screen.
Attention: If you need updated device drivers, do not download them from the Windows Update Web site. Obtain them from Lenovo. For more information, see Making sure device drivers are current on page 86.
Solving recovery problems If you are unable to access the Rescue and Recovery workspace or the Windows environment, do one of the following:
Use a rescue medium to start the Rescue and Recovery workspace. See Creating and using a rescue medium on page 60.
Use recovery media if all other methods of recovery have failed and you need to restore the solid-state drive to the factory default settings. See Creating and using recovery media on page 57.
Note: If you are unable to access the Rescue and Recovery workspace or the Windows environment from a rescue medium or recovery media, you might not have the rescue device (an internal solid-state drive, a disc, a USB hard disk drive, or other external devices) set as the first boot device in the startup device sequence. You must first ensure that your rescue device is set as the first boot device in the startup device sequence in the ThinkPad Setup program. For detailed information on how to temporarily or permanently change the startup device sequence, see on page .
It is important to create a rescue medium and a set of recovery media as early as possible and store them in a safe place for future use.
Recovery overview for Windows 8 models This section provides information about the recovery solutions provided by Lenovo on computers preinstalled with the Windows 8 operating system.
Recovery solutions for Windows 8 models
Refreshing your computer
If your computer does not perform well and the problem might be caused by a recently installed program, you can refresh your computer without losing your personal files or changing your settings.
Attention: If you refresh your computer, the programs that came with your computer and the programs that you installed from Windows Store will be reinstalled, but all other programs will be removed.
To refresh your computer, do the following:
1. Move your cursor to the bottom right corner of the screen to bring up the charms. Click Settings Change PC settings General.
2. In the Refresh your PC without affecting your files section, click Get started.
Resetting your computer to the factory default settings
You can reset your computer to the factory default settings. Resetting the computer will reinstall the operating system, and reinstall all the programs and settings that came with your computer.
Attention: If you reset your computer, all your personal files and settings will be deleted. To avoid data loss, make a backup copy of all the data that you want to keep.
To reset your computer, do the following:
62 User Guide
1. Move your cursor to the bottom right corner of the screen to bring up the charms. Click Settings Change PC settings General.
2. In the Remove everything and reinstall Windows section, click Get started.
Advanced startup options
Advanced startup options enable you to change the startup settings of your Windows operating system, start the computer from an external device, or restore the Windows operating system from a system image.
To use the advanced startup options, do the following:
1. Move your cursor to the bottom right corner of the screen to bring up the charms. Click Settings Change PC settings General.
2. In the Advanced startup section, click Restart now Troubleshoot Advanced options.
3. Restart your computer following the instructions on the screen.
For more details about the recovery solutions provided on computers preinstalled with the Windows 8 operating system, refer to the help information system of the Windows 8 operating system.
Chapter 5. Recovery overview 63
64 User Guide
Chapter 6. Advanced configuration
While it is important to protect files, data, and settings that are on the solid-state drive, you also might need to install a new operating system, install new device drivers, update your system UEFI BIOS, or recover preinstalled software. This information will help you handle your computer with proper care and keep it in top working shape.
Installing a new operating system on page 65
Installing device drivers on page 67
ThinkPad Setup on page 68
Using system management on page 84
Installing a new operating system If you install a new operating system in your computer, you need to install the supplement files and ThinkPad device drivers for it at the same time.
If you install a new Windows 7 operating system, the necessary files are located in the following directories of your solid state-drive or hard disk drive:
The supplement files for the operating system supported are in the C:\SWTOOLS\OSFIXES directory.
The device drivers for the operating system supported are in the C:\SWTOOLS\DRIVERS directory.
The preloaded software programs are in the C:\SWTOOLS\APPS directory.
Note: If you cannot find the supplement files, the device drivers, and program software you need on your hard disk drive, or if you want to receive updates and the latest information about them, go to http://www.lenovo.com/ThinkPadDrivers.
If you install a new Windows 8 operating system, go to http://www.lenovo.com/ThinkPadDrivers for the latest device drivers, and then follow the instructions on the screen.
Note: The process of installing the new operating system deletes all the data on your hard disk drive, including backups or images that were stored in a hidden folder by use of the Rescue and Recovery program.
Before you begin Before you install the operating system, do the following:
If you install a new Windows 7 operating system, copy all the subdirectories and files in the C:\SWTOOLS directory to a removable storage device, to avoid losing files during the installation.
Print the instructions you will use. Go to the section for the operating system you are using:
Installing the Windows 7 operating system on page 66
Installing the Windows 8 operating system on page 67
Notes:
The UEFI BIOS features are supported on the Windows 7 operating system (64-bit) and the Windows 8 operating system (64-bit). Ensure that the UEFI/Legacy Boot setting in ThinkPad Setup is set to your preference to boot the desired operating system.
After installing the operating system, you should not change the initial UEFI/Legacy Boot setting in ThinkPad Setup. The UEFI/Legacy Boot setting must be the same as it was when the Windows operating system image was installed. Otherwise, the operating system will not boot correctly.
Copyright Lenovo 2012 65
For the country or region code required in the installation, use one of the following:
Country or region: Code China: SC Denmark: DK Finland: FI France: FR Germany: GR Italy: IT Japan: JP Netherlands: NL Norway: NO Spain: SP Sweden: SV Taiwan and Hong Kong: TC United States: US
Installing the Windows 7 operating system Before you start, print these instructions.
To install the Windows 7 operating system and its related software on your computer, do the following:
1. Start ThinkPad Setup.
2. Select Startup.
3. Select UEFI/Legacy Boot.
4. Do one of the following:
If you want to install the Windows 7 (32bit) operating system, select Legacy Only or Both.
If you want to install the Windows 7 (64bit) operating system in Legacy mode, select Legacy Only.
If you want to install the Windows 7 (64bit) operating system in UEFI mode, select UEFI Only.
5. Press F10.
6. Connect the drive that contains the Windows 7 operating system installer to your computer, and restart the computer.
7. Restore C:\SWTOOLS from the backup copy you made before starting the installation.
8. Install the Intel Chipset Support for Windows 2000/XP/Vista/7/8. To do this, run Setup.exe in C:\SWTOOLS\DRIVERS\INTELINF\infinst_autol.
9. Install device drivers. See Installing other device drivers and software on the Windows 7 operating system on page 68.
Installing the registry patches for Windows 7
Go to http://www.lenovo.com/support and install the following registry patches:
Registry patch enabling Wake Up on LAN from Standby for Energy Star
Fix for Issue of HDD with HD Detection
Installing the Windows 7 fix modules
The Windows 7 fix modules are in the following directory: C:\SWTOOLS\OSFIXES\
The name of each subfolder is the number of a fix module. For information about each fix module, go to the Microsoft Knowledge Base homepage at http://support.microsoft.com/, type the number of the fix module you need in the search field, and click Search.
66 User Guide
To install a fix module, run the EXE file in a subfolder and follow the instructions on the screen.
Installing the Windows 8 operating system Before you start, print these instructions.
Before you start, print these instructions.
To install the Windows 8 operating system and its related software on your computer, do the following:
1. Start ThinkPad Setup.
2. Select Startup Boot.
3. Change the boot priority order to boot your computer from the drive that contains the Windows 8 operating system installer.
4. Press F10.
5. Connect the drive that contains the Windows 8 operating system installer to your computer, and restart the computer.
6. Install the Intel Chipset Support for Windows 2000/XP/Vista/7/8. To do this, run Setup.exe in C:\SWTOOLS\DRIVERS\INTELINF\infinst_autol.
7. Install device drivers. See Installing other device drivers and software on the Windows 7 operating system on page 68.
Installing the Windows 8 update module package
For information about each fix module, go to the Microsoft Knowledge Base homepage at http://support.microsoft.com/, type the number of the fix module you need in the search field, and click Search.
Note: The Web site address might change without notice. If the homepage is not displayed, search for it from the Microsoft top page.
Installing device drivers The device drivers are available at http://www.lenovo.com/ThinkPadDrivers. Select the product name of your computer in the Current ThinkPad systems list to see all the device drivers for your computer.
Attention: Always go to http://www.lenovo.com/ThinkPadDrivers for the latest device drivers. Do not download them from the Windows Update Web site.
Installing the driver for the 4-in-1 media card reader To use the 4-in-1 media card reader, you need to download and install the Ricoh Multi Card Reader Driver from the Lenovo Support Web site at: http://www.lenovo.com/support
Installing the driver for USB 3.0 on the Windows 7 operating system If your computer is installed with the Windows 7 operating system, it supports USB 3.0 functions. To use the USB 3.0 connectors, you need to download and install the USB 3.0 driver after you reinstalled the Windows 7 operating system by doing the following:
1. Go to http://www.lenovo.com/support. Find your model and display the driver links.
2. Select the USB 3.0 driver for the 32-bit or 64-bit operating system and extract it to your local hard disk drive.
3. Double-click the Setup.exe file in the C:\DRIVERS\WIN\USB3.0\ directory.
Chapter 6. Advanced configuration 67
4. Click Next. If the device driver is already installed, click Cancel. Follow the instructions on the screen until the installation is finished.
Installing the ThinkPad monitor file for Windows 2000/XP/Vista/7/8 on the Windows 7 operating system The ThinkPad monitor file for Windows 2000/XP/Vista/7/8 is in the following directory: C:\SWTOOLS\DRIVERS\MONITOR
Note: If you cannot find this directory on your hard disk drive or solid state drive, download the ThinkPad monitor file for Windows 2000/XP/Vista/7/8 from the ThinkPad Web site at: http://www.lenovo.com/ThinkPadDrivers
Note: Before you install this file, make sure that the correct video driver has been installed.
To install the correct video driver, do the following:
1. Right-click on the desktop, and click Personalize.
2. Click Display at the left.
3. Click Change display settings.
4. Click Advanced Settings.
5. Click the Monitor tab.
6. Click Properties.
7. Click the Driver tab.
8. Click Update Driver.
9. Select Browse my computer for driver software, and then click Let me pick from a list of device drivers on my computer.
10. Click Have Disk.
11. Specify path C:\SWTOOLS\DRIVERS\MONITOR to this monitor INF file. Then, click Open.
12. Click OK.
13. Confirm the correct display type, then click Next.
14. When installation completes, click Close.
15. Click Close to close the Display Properties window.
16. Click OK on the Monitor tab.
17. Click OK and close the Display Settings window.
Installing other device drivers and software on the Windows 7 operating system The device drivers are provided in the C:\SWTOOLS\DRIVERS directory on your hard disk drive. You will also need to install program software, which is provided in the C:\SWTOOLS\APPS directory on your hard disk drive. To do this, refer to the instructions in Reinstalling preinstalled applications and device drivers on page 61.
Note: If you cannot find the Supplement files, device drivers, and program software you need on your hard disk drive, or if you want to receive updates and the latest information about them, go to http://www.lenovo.com/ThinkPadDrivers.
ThinkPad Setup Your computer comes with the ThinkPad Setup program to enable you to select various setup parameters.
68 User Guide
To start ThinkPad Setup, do the following:
1. Turn on the computer. When the logo screen is displayed, press the F1 key. The ThinkPad Setup program main menu opens.
If you have set a supervisor password, the ThinkPad Setup program main menu will be displayed after you enter the password. You can start ThinkPad Setup by pressing Enter instead of entering the supervisor password. However, you cannot change the parameters that are protected by the supervisor password. For more information, refer to Using passwords on page 45.
2. Move to an item you want to change, by using the cursor keys. When the item is highlighted, press Enter. A submenu is displayed.
3. Change the items you wish to change, by pressing the following keys:
F6 or The combination of Shift and + : Change to a higher value.
F5 or : Change to a lower value.
If the item has a submenu, you can display it by pressing Enter.
4. Press Esc to exit from the submenu.
5. If you are on a nested submenu, press Esc repeatedly until you reach the ThinkPad Setup program main menu.
Note: If you need to restore the settings to their original state as of the time of purchase, press F9 to load the default settings. You also can select an option on the Restart submenu to load the default settings or discard the changes.
6. Select Restart. Move the cursor to the option you want for restarting your computer; then press Enter. Your computer restarts.
Note: Depending on the operating system you are using, some menu items might not be available on your computer, and some menu items listed in this chapter might be slightly different with the actual menu items displayed on your computer.
Main menu The Main menu is the first interface you see after you enter ThinkPad Setup. It displays the following configuration of your computer:
UEFI BIOS Version
UEFI BIOS Date (Year-Month-Day)
Embedded Controller Version
Machine Type Model
System-unit serial number
System board serial number
Asset Tag
CPU Type
CPU Speed
Installed memory
UUID
MAC address (Internal LAN)
Preinstalled operating system license
UEFI secure boot
Chapter 6. Advanced configuration 69
Config menu If you need to change the configuration of your computer, select Config from the ThinkPad Setup program main menu.
The following table shows the contents of the Config menu.
Notes:
Default values are in boldface. The default settings are already optimized for you. If you consider changing the computer configuration, proceed with extreme caution. Setting the configuration incorrectly might cause unexpected results.
On each submenu, press the Enter key to show selectable options and select a desired option by using cursor key, or type desired values from the keyboard directly.
Some items are displayed on the menu only if the computer supports the corresponding features.
Table 5. Config menu items
Menu item Submenu item Selection Comments
Wake On LAN Disabled
AC only
AC and Battery
Enable the system to power on when the Ethernet controller receives a magic packet (a special network message).
If you select AC Only, Wake on LAN is enabled only when the ac power adapter is attached.
If you select AC and Battery, Wake on LAN is enabled with any power sources.
Notes:
The magic packet type Wake on LAN requires ac power.
The Wake on LAN function does not work when a hard disk password is set.
Ethernet LAN Option ROM (for Legacy Only boot mode or Both with Legacy first)
Disabled
Enabled
Load the Ethernet LAN Option ROM to enable startup from an integrated network device.
UEFI IPv4 Network Stack (for UEFI Only boot mode or Both with UEFI first)
Disabled
Enabled
Enable or disable Internet Protocol Version 4 (IPv4) network stack for UEFI environment.
UEFI IPv6 Network Stack (for UEFI Only boot mode or Both with UEFI first)
Disabled
Enabled
Enable or disable Internet Protocol Version 6 (IPv6) network stack for UEFI environment.
Network
70 User Guide
Table 5. Config menu items (continued)
Menu item Submenu item Selection Comments
UEFI PXE Boot Priority (for Both with UEFI first boot mode, and IPv6 and IPv4 stacks are both enabled.)
IPv6 First
IPv4 First
Select network stack priority for UEFI PXE boot.
USB UEFI BIOS Support Disabled
Enabled
Enables or disables boot support for USB device and USB optical drive.
Always On USB Disabled
Enabled
If you select Enabled, the external USB devices can be charged through USB connectors even when the system is in low power mode (sleep, hibernate, or power-off).
Always On USB Charge in off mode
Disabled
Enabled
If you select Enabled, the Always On USB connector enables you to charge some mobile digital devices and smartphones when the computer is powered off, provided that the ac power adapter is connected.
USB
USB 3.0 Mode Disabled
Enabled
Auto
Set the USB 3.0 controller mode for the ports shared between USB 2.0 and USB 3.0 controllers.
If you select Auto, it enables you to connect and route appropriate USB 3.0 or USB 2.0 connectors.
If you select Enabled, it enables USB 3.0 mode and allows USB 3.0 to be supported in the operating system.
If you select Disabled, it disables and hides the USB 3.0 controller, and USB 3.0 connectors will work as USB 2.0 connectors.
Chapter 6. Advanced configuration 71
Table 5. Config menu items (continued)
Menu item Submenu item Selection Comments
TrackPoint Disabled
Enabled
Enable or disable the built-in TrackPoint device.
Note: If you want to use an external mouse, select Disabled.
Touch Pad Disabled
Enabled
Enable or disable the built-in touch pad.
Note: If you want to use an external mouse, select Disabled.
Fn and Ctrl Key swap Disabled
Enabled
If you select Enabled, the Fn key works as the Ctrl key, and the Ctrl key works as the Fn key.
Note: Even when Enabled is selected, you need to press the Fn key to resume the computer from sleep mode to normal operation.
Fn Key Lock Disabled
Enabled
If you select Enabled, you can press the Fn key once to keep it in a pressed condition, and then press the desired function key. The action is equivalent to pressing simultaneously. If you press the Fn key twice, the state is locked until you press the Fn key again.
Keyboard/Mouse
Keyboard Illumination Control
ThinkLight Only
Keyboard backlight Only
Both
Enable the ThinkLight light feature, the keyboard backlight feature, or both. After you make a selection, you can activate the corresponding feature(s) by pressing Fn+Space.
Display Boot Display Device ThinkPad LCD
Analog (VGA)
Digital on ThinkPad
Digital 1 on dock
Digital 2 on dock
Select the display device that is to be active at boot time. This selection is effective for boot time, password prompt, and ThinkPad Setup.
Digital on Thinkpad is the Mini DisplayPort on your computer.
Digital 1 on dock and Digital 2 on dock are DisplayPort or DVI connectors on a docking station.
72 User Guide
Table 5. Config menu items (continued)
Menu item Submenu item Selection Comments
Intel SpeedStep
technology (Intel SpeedStep mounted models only)
Disabled
Enabled
Mode for AC
Maximum Performance
Battery Optimized
Mode for Battery
Maximum Performance
Battery Optimized
Select the mode of Intel SpeedStep technology at runtime.
Maximum Performance: Always highest speed
Battery Optimized: Always lowest speed
Disabled: No runtime support, lowest speed
Adaptive Thermal Management
Scheme for AC
Maximize Performance
Balanced
Scheme for Battery
Maximize Performance
Balanced
Select a thermal management scheme to use.
Maximize Performance: Reduces CPU throttling
Balanced: Balances sound, temperature, and performance
Note: Each scheme affects fan sound, temperature, and performance.
CPU Power Management Disabled
Enabled
Enables or disables the power saving feature that stops the microprocessor clock automatically when there are no system activities. Normally, it is not necessary to change the setting.
PCI Express Power Management
Disabled
Enabled
Enable or disable a feature that automatically adjusts power management when there is no PCI Express activity. Normally, it is not necessary to change the setting.
Power On with AC Attach Disabled
Enabled
Enable or disable a feature that powers on the system when the ac power adapter is attached.
If you select Enabled, the system is powered on when the ac power adapter is attached. When the system is in hibernate state, the system resumes.
If you select Disabled, the system is not powered on
Power
Chapter 6. Advanced configuration 73
Table 5. Config menu items (continued)
Menu item Submenu item Selection Comments
nor resumed when the ac power adapter is attached.
Intel (R) Rapid Start Technology
Disabled
Enabled
Enter after:
Immediately
1 minute
2 minutes
5 minutes
10 minutes
15 minutes
30 minutes
1 hour
2 hours
3 hours
To use this feature, a special partition on the solid-state drive is required.
When enabled, the computer enters a lower power state after the specified time in sleep state. And it takes only seconds to resume normal operation.
Disable Built-in Battery Yes
No
Temporarily disable battery for servicing the system. After selecting this item, the system will be automatically powered off. The system is then ready to be serviced.
Note: The ac power adapter must be disconnected from the system to perform this operation. The battery will be automatically re-enabled when the ac power adapter is reconnected to the system.
Password Beep Disabled
Enabled
Enables this option to have a beep sound when the system is waiting for a power-on, hard disk, or supervisor password. Different beeps will sound when the entered password matches or does not match the configured password.
Beep and Alarm
Keyboard Beep Disabled
Enabled
Enables or disables keyboard beep when unmanageable key combinations are pressed.
Serial ATA (SATA) SATA Controller Mode Option
Compatibility
AHCI
Selects SATA controller operation mode.
74 User Guide
Table 5. Config menu items (continued)
Menu item Submenu item Selection Comments
Core Multi-Processing Disabled
Enabled
Enable or disable additional execution core units within a CPU.
Note: If you are using a computer with a single-core processor, this item is not available.
CPU
Intel Hyper-Threading Technology
Disabled
Enabled
Enable or disable additional logical processors within a processor core.
Intel AMT Control Disabled
Enabled
Permanently Disabled
If you select Enabled Intel AMT (Active Management Technology) is configured and additional setup items are provided in MEBx (Management Engine BIOS Extension) Setup.
If you select Permanently Disabled, You will never be able to enable it again. Be cautious when you want to use this option.
Note: You can enter the MEBx Setup menu by pressing the Ctrl-P key combination in the Startup Interrupt Menu window. To display the Startup Interrupt Menu window, press the Enter key during the POST.
CIRA Timeout 0255 Note: The default value is 60 seconds.
Set the timeout option for CIRA connection to be established. 1 though 254 seconds are selectable.
If you select 0, use 60 seconds as default timeout value.
If you select 255, waiting time for establishing a connection is unlimited.
Intel AMT
Console Type VT100
PC-ANSI
VT100+
VT-UTF8
Select the console type for AMT.
Note: This console type should match the Intel AMT remote console.
Chapter 6. Advanced configuration 75
Date/Time menu If you need to set the current date and time of your computer, select Date/Time from the ThinkPad Setup program main menu. The following submenu is displayed:
System Date
System Time
To change the date and time, do the following:
1. Using the up and down arrow keys, select the item to change the date or time.
2. Press Tab, Shift+Tab, or Enter to select a field.
3. Type the date or time.
Note: Another way to adjust the date and time is pressing the or + key.
Security menu If you need to set the security features of your computer, select Security from the ThinkPad Setup program main menu.
The following table lists the Security menu items.
Notes:
Default values are in boldface. The default settings are already optimized for you. If you consider changing the computer configuration, proceed with extreme caution. Setting the configuration incorrectly might cause unexpected results.
In each submenu, press the Enter key to show selectable options and select a desired option by using cursor key, or type desired values from the keyboard directly.
Some items are displayed on the menu only if the computer supports the corresponding features.
Table 6. Security menu items
Menu item Submenu item Selection Comments
Hardware Password Manager
Disabled
Enabled
Managing your power-on password, supervisor password, and your hard disk passwords by the management server.
Supervisor Password Disabled
Enabled
See Supervisor password on page 48.
Lock UEFI BIOS Settings (Windows 7) Lock UEFI Settings (Windows 8)
Disabled
Enabled
Enable or disable the function that protects items in ThinkPad Setup program from being changed by a user who does not have the supervisor password. By default, this is set to Disabled. If you set the supervisor password and enable this function, no one but you can change any items in ThinkPad Setup.
Password at unattended boot
Disabled
Enabled
If you select and enable Password at unattended boot, a password prompt
Password
76 User Guide
Table 6. Security menu items (continued)
Menu item Submenu item Selection Comments
is displayed when the computer is turned on, from either a power-off state or hibernation state. If you select Disabled, no password prompt is displayed; the computer goes ahead and loads the operating system. To prevent unauthorized access, set the user authentication on the operating system.
Password at restart Disabled
Enabled
If you select and enable Password at restart, a password prompt is displayed when you restart the computer. If you select Disabled, no password prompt is displayed; the computer goes ahead and loads the operating system. To prevent unauthorized access, set the user authentication on the operating system.
Set Minimum Length Disabled
x characters (4x12)
Specify a minimum length for power-on passwords and hard disk passwords. If you set the supervisor password and specify a minimum length for passwords, no one but you can change the length.
Power-On Password Disabled
Enabled
See Power-on password on page 46.
Hard Disk x Password Disabled
Enabled
Refer to Hard disk passwords on page 46.
Notes:
Hard Disk 1 means the hard disk drive built into your computer.
Hard Disk 2 is displayed on the Password submenu only if a secondary hard disk drive is installed in the Serial Ultrabay Enhanced bay.
Chapter 6. Advanced configuration 77
Table 6. Security menu items (continued)
Menu item Submenu item Selection Comments
Predesktop Authentication Disabled
Enabled
Enable or disable fingerprint authentication before the operating system is loaded.
Reader Priority External Internal
Internal Only
If External Internal is selected, an external fingerprint reader is used if attached. Otherwise, an internal fingerprint reader is used. If Internal Only is selected, an internal fingerprint reader is used.
Security Mode Normal
High
If fingerprint authentication fails, you can still start the computer by entering a password. If you have selected Normal, enter a power-on password or a supervisor password; if you have selected High, enter a supervisor password.
Password Authentication Disabled
Enabled
Enable or disable password authentication. If high security mode is selected, this item is displayed.
Fingerprint
Reset Fingerprint Data Enter This option is used to erase all fingerprint data stored in the fingerprint reader and reset settings to the factory state (e.g. Power-on security, LEDs, etc.) As a result, any power-on security features previously enabled will not be able to work until they are re-enabled in the fingerprint software.
Security Chip Active
Inactive
Disabled
If you select Active, the security chip is functional. If you select Inactive, the Security Chip option is displayed, but is not functional. If you select Disable the security chip is hidden and is not functional.
Security Reporting Options Enable or disable the following Security Reporting Options;
BIOS ROM String Reporting (Windows 7) or UEFI ROM String Reporting (Windows 8): BIOS text string
CMOS Reporting: CMOS data
Security Chip
78 User Guide
Table 6. Security menu items (continued)
Menu item Submenu item Selection Comments
NVRAM Reporting: Security data stored in the Asset ID
SMBIOS Reporting: SMBIOS data
Clear Security Chip Enter Clear the encryption key.
Note: Only if you select Active for the security chip, this item will be displayed.
Intel TXT Feature Disabled
Enabled
Enable or disable Intel Trusted Execution Technology.
Physical Presence for Provisioning
Disabled
Enabled
This option enables or disables the confirmation message when you change the settings of the security chip.
Physical Presence for Clear Disabled
Enabled
This option enable or disables the confirmation message when you clear the security chip.
Flash BIOS Updating by End-Users (Windows 7) Flash Firmware Updating by End-Users
Disabled
Enabled
If you select Enabled, all users can update the UEFI BIOS. If you select Disabled, only the person who knows the supervisor password can update the UEFI BIOS.
UEFI BIOS Update Option or UEFI Firmware Update Option
Secure RollBack Prevention Disabled
Enabled
If you select Enabled, you can choose to flash to the previous version of the UEFI BIOS
Memory Protection Execution Prevention Disabled
Enabled
Some computer viruses and worms cause memory buffers to overflow by running code where only data is allowed. If the Data Execution Prevention feature can be used with your operating system, then by selecting Enabled you can protect your computer against attacks by such viruses and worms. If after choosing Enabled you find that an program does not run correctly, select Disabled and reset the setting.
Chapter 6. Advanced configuration 79
Table 6. Security menu items (continued)
Menu item Submenu item Selection Comments
Intel Virtualization Technology
Disabled
Enabled
If you select Enabled, a Virtual Machine Monitor (VMM) can utilize the additional hardware capabilities provided by Virtualization Technology.
Virtualization
Intel VT-d Feature Disabled
Enabled
Intel VT-d is Intel Virtualization Technology for Directed I/O. When enabled, a VMM can utilize the platform infrastructure for I/O virtualization.
Note: This submenu is not supported in models with an AMD CPU.
Intel AT Module Activation Disabled
Enabled
Permanently Disabled
Enable or disable the UEFI BIOS interface to activate the Intel AT module, which is an optional Anti-Theft service from Intel.
Note: If you set the Intel AT module activation to Permanently Disabled, you will be unable to enable this setting again.
Intel AT Suspend Enter This option is displayed only when the anti-theft function is activated.
The Intel anti-theft suspend screen will be displayed at next boot to enter the suspend mode.
Anti-Theft
Computrace Module Activation
Disabled
Enabled
Permanently Disabled
Enables or disables the UEFI BIOS interface to activate the computrace module. Computrace is an optional monitoring service from Absolute Software.
Note: If you set the computrace module activation to Permanently Disabled, you will be unable to enable this setting again.
80 User Guide
Table 6. Security menu items (continued)
Menu item Submenu item Selection Comments
Secure Boot Disabled
Enabled
Enable or disable the UEFI Secure Boot feature. Select Enable to prevent unauthorized operating systems from running at boot time. Select Disabled to allow any operating systems to run at boot time.
Platform Mode User Mode
Setup Mode
Specify the system operating mode.
Secure Boot Mode Standard Mode
Custom Mode
Indicates Secure Boot mode is standard mode or custom mode.
Reset to Setup Mode This option is used to clear the current platform key and put the system into setup mode. You can install your own platform key and customize the Secure Boot signature databases in setup mode.
Secure Boot mode will be set to custom mode.
Secure Boot
Restore Factory Keys This option is used to restore all keys and certificates in Secure Boot databases to factory defaults. Any customized Secure Boot settings will be erased, and the default platform key will be re-established along with the original signature databases including certificate for Windows 8 operating system.
Startup menu You might need to change the startup sequence of your computer. To do so, select Startup from the ThinkPad Setup main menu.
Attention:
After you change your startup sequence, you must be extremely careful not to specify a wrong device during a copy, a save, or a format operation. If you specify a wrong device, your data and programs might be erased or overwritten.
If you are using the BitLocker drive encryption, you should not change the startup sequence. BitLocker drive encryption detects the change of startup sequence and locks the computer from booting.
Chapter 6. Advanced configuration 81
Changing the startup sequence
Changing the startup sequence
To change the startup sequence, do the following:
1. Select Boot; then press Enter. The default boot list is displayed, showing the order in which devices will be started up, even devices that are not attached to or installed on your computer are listed.
Use the Boot submenu to specify the startup sequence that runs when you turn on the power. .
2. Set the startup order by sing the following keys:
Use cursor keys to select a device.
Use F6 or the combination of Shift and + to move the device up to a higher priority.
Use F5 or to move the device down to a lower priority.
Use the combination of Shift and ! to exclude or include a device.
3. Press F10 to save the changes and restart the system.
To change the startup sequence temporarily so that the system starts up from a different drive, do the following:
1. Turn off the computer.
2. Turn on the computer; then, while the ThinkPad logo is displayed, press F12.
3. Select the device you want to start first.
Note: To boot menu will be displayed when the system cannot boot from any devices or the operating system cannot be found.
The following table lists the Startup menu items.
Notes:
Default values are in boldface.
In each submenu, press the Enter key to show selectable options and select a desired option by using cursor key.
Some items are displayed on the menu only if the computer supports the corresponding features.
Table 7. Startup menu items
Menu item Selection Comments
Boot Refer to Changing the startup sequence on page 82.
Network Boot Select the boot device when the system wakes from LAN. If Wake On LAN is enabled, the network administrator can turn on all of the computers in a LAN remotely by use of network management software.
82 User Guide
Table 7. Startup menu items (continued)
Menu item Selection Comments
UEFI/Legacy Boot Both
UEFI/Legacy Boot Priority
UEFI first
Legacy first
UEFI Only
Legacy Only
CSM Support (for UEFI Only)
Yes
No
Select system boot capability.
Both: Select priority of boot options between UEFI and Legacy.
UEFI Only: The system will boot from the UEFI enabled operating system.
Legacy Only: The system will boot from any operating system other than the UEFI enabled one.
Note: If you select UEFI Only, the system cannot boot from the bootable devices that do not have the UEFI enabled operating system.
Compatibility Support Module (CSM) is required for booting the legacy operating system. If you select UEFI Only, CSM Support is selectable. For Both or Legacy Onlymode, CSM Support is not selectable.
Boot Mode Quick
Diagnostics
Note: You also can enter the Diagnostic mode by pressing Esc during POST.
Screen during POST:
Quick: The ThinkPad Logo screen is displayed.
Diagnostics: Test messages are displayed.
Option Key Display Disabled
Enabled
If you select Disabled, the message To interrupt normal startup, press Enter. message is not displayed during the POST.
Boot Device List F12 Option Disabled
Enabled
If you select Enabled, the F12 key is recognized and the Boot Menu window is displayed.
Boot Order Lock Disabled
Enabled
If you select Enabled, the boot priority is locked for your future use.
Restart menu If you need to close the ThinkPad Setup program and restart the system, select Restart from the ThinkPad Setup program main menu. The following submenu is displayed:
Exit Saving Changes: Restart the system after saving the changes.
Exit Discarding Changes: Restart the system without saving the changes.
Load Setup Defaults: Load the default setting that was in effect at the time of purchase.
Enable OS Optimized Defaults to meet the Microsoft Windows 8 certification requirements. When you change this setting, some other settings are changed automatically. The affected settings are CSM Support, UEFI/Legacy Boot, Secure Boot, and Secure RollBack Prevention.
Discard Changes: Discard the changes.
Save Changes: Save the changes.
Chapter 6. Advanced configuration 83
Updating your system UEFI BIOS The Unified Extensible Firmware Interface (UEFI) BIOS is a part of the system programs that make up the basic layer of software built into your computer. The UEFI BIOS translates the instructions from other software layers.
Your computer system board has a module called EEPROM, also referred to as flash memory. You can update the UEFI BIOS and the ThinkPad Setup program by starting your computer with a flash update optical disc or flash update program running in the Windows environment.
In some instances when you add software, hardware, or a device driver, you might be informed that you need to update your UEFI BIOS in order for the new addition to work properly.
To update your UEFI BIOS, go to the following Web site and follow the instructions on the screen: http://www.lenovo.com/ThinkPadDrivers
Using system management This section is intended primarily for network administrators.
Your computer is designed for manageability, so that you can redirect more of your resources to better meet your business objectives.
This manageability, or Total Cost of Ownership (TCO), enables you to remotely operate client computers in the same way as you operate your own computer, such as turning on a client computer, formatting solid-state drive, and installing software.
Once the computer is configured and operational, you can manage it by use of software and manageability features already integrated into the client system and the network.
System management Read this topic to learn more about features of system management.
Desktop Management Interface
The system BIOS (UEFI BIOS) of your computer supports an interface called System Management BIOS Reference Specification (SMBIOS) V2.6.1. SMBIOS provides information about the hardware components of your system. It is the responsibility of the BIOS to supply this database with information about itself and the devices on the system board. This specification documents the standards for getting access to this BIOS information.
Preboot eXecution Environment
The Preboot eXecution Environment (PXE) technology makes your computer more manageable (it is PXE 2.1-compliant) by enabling it to boot (load an operating system or another executable image) from a server. Your computer supports the personal computer functions that PXE requires. For example, with the appropriate LAN card, your computer can be booted from the PXE server.
Note: Remote Program Load (RPL) cannot be used with your computer.
Asset ID EEPROM
The Asset ID EEPROM contains information about the system, including its configuration and the serial numbers of key components. It also includes a number of blank fields in which you can record information about the end users in your network.
84 User Guide
Chapter 7. Preventing problems
An important part of owning a ThinkPad notebook computer is maintenance. With proper care, you can avoid common problems. The chapter provides information that can help you keep your computer running smoothly.
General tips for preventing problems on page 85
Making sure device drivers are current on page 86
Taking care of your computer on page 86
General tips for preventing problems To check the hard disk drive capacity, click Start Computer on the Windows 7 operating system. For
the Windows 8 operating system, open the Windows Explorer and click Computer.
Empty your recycle bin on a regular basis.
Use disk defragment tool regularly on your solid-state to improve data seek and read times.
To free up disk space, uninstall unused application programs.
Note: You also might want to look for application program duplication or overlapping versions.
Clean out your Inbox, Sent, and Trash folders from your e-mail client program.
Back up your data at least once a week. If critical data is present, it is a good idea to perform a daily backup operation. Lenovo has many backup options available for your computer. Rewritable optical drives are available for most machines and are easily installed.
Schedule system restore operations to take a system snapshot periodically. For more information about system restore, see Chapter 5 Recovery overview on page 57.
Update device drivers and UEFI BIOS when needed.
Profile your machine at http://www.lenovo.com/support to keep up to date with current drivers and revisions.
Keep up to date for device drivers on other non-Lenovo hardware. You might want to read the device driver information release notes prior to updating for compatibility or known issues.
Keep a log book. Entries might include major hardware or software changes, driver updates, minor issues you have experienced, and how you resolved the minor issues.
If you ever need to run a recovery on your computer to return the preload onto the machine, the following tips might help along the way:
Remove all external devices such as the printer, keyboard, and so on.
Ensure that your battery is charged and that you have the ac power connected.
Boot into ThinkPad Setup and load the default settings.
Restart the computer and start the recovery operation.
If your computer uses discs as the recovery media, do not remove the disc from the drive until prompted to do so.
For suspected solid-state drive issues, refer to Diagnosing problems on page 89 and run a diagnostic test of the drive before you call the Customer Support Center. If your computer does not start up, download the files to create a bootable self-test media from the following Web site: http://www.lenovo.com/hddtest. Run the test and record any messages or error codes. If the test returns any failing error codes or messages, call the Customer Support Center with the codes or messages and the computer in front of you. A technician will assist you further.
Copyright Lenovo 2012 85
If required, you can find your country's Customer Support Center at the following Web address: http://www.lenovo.com/support/phone. When calling the Customer Support Center, ensure that you have your machine model type, serial number, and the computer in front of you. Also, if the computer is producing error codes, it is helpful to have the error screen on or the message written down.
Making sure device drivers are current Device drivers are programs that contain instructions for the operating system about how to operate or drive a certain piece of hardware. Each hardware component on your computer has its own specific driver. If you add a new component, the operating system needs to be instructed on how to operate that piece of hardware. After you install the driver, the operating system can recognize the hardware component and understand how to use it.
Note: Because drivers are programs, like any other file on your computer, they are susceptible to corruption and might not perform correctly if corruption occurs.
It is not always necessary to download the latest drivers. However, you should download the latest driver for a component if you notice poor performance from that component or if you added a new component. This might eliminate the driver as the potential cause of the problem.
Getting the latest drivers from the Web site
You can download and install updated device drivers from the Lenovo Web site by doing the following:
1. Go to http://www.lenovo.com/ThinkPadDrivers.
2. Click the machine type of your computer.
3. Locate the desired drivers and click its latest edition.
4. Follow the directions on the screen and install the necessary software.
Getting the latest drivers using System Update
The System Update program helps you keep the software on your system up-to-date. Update packages are stored on Lenovo servers and can be downloaded from the Lenovo Support Web site. Update packages can contain applications, device drivers, UEFI BIOS flashes, or software updates. When the System Update program connects to the Lenovo Support Web site, the System Update program automatically recognizes the machine type and model of your computer, the installed operating system, and the language of the operating system to determine what updates are available for your computer. The System Update program then displays a list of update packages and categorizes each update as critical, recommended, or optional to help you understand the importance. You have complete control of which updates to download and install. After you select the update packages you want, the System Update program automatically downloads and installs the updates without any further intervention from you.
The System Update program is preinstalled on your computer and is ready to run. The only prerequisite is an active Internet connection. You can start the program manually, or you can use the schedule feature to enable the program to search for updates automatically at specified intervals. You also can predefine scheduled updates to search by severity (critical updates, critical and recommended updates, or all updates) so the list you choose from contains only those update types that are of interest to you.
For more information about how to use System Update, refer to An introduction to Lenovo programs.
Taking care of your computer Although your computer is designed to function reliably in normal work environments, you need to use common sense in handling it. By following these important tips, you will get the most use and enjoyment out of your computer.
86 User Guide
Be careful about where and how you work
Store packing materials safely out of the reach of children to prevent the risk of suffocation from plastic bags.
Keep your computer away from magnets, activated cellular phones, electrical appliances, or speakers (within 13 cm or 5 inches).
Avoid subjecting your computer to extreme temperatures (below 5C/41F or above 35C/95F).
Some appliances, such as certain portable desktop fans or air purifiers, can produce negative ions. If a computer is close to such an appliance, and is exposed for an extended time to air containing negative ions, it might become electrostatically charged. Such a charge might be discharged through your hands when you touch the keyboard or other parts of the computer, or through connectors on I/O devices connected to it. Even though this kind of electrostatic discharge (ESD) is the opposite of a discharge from your body or clothing to the computer, it poses the same risk of a computer malfunction.
Your computer is designed and manufactured to minimize any effects of electrostatic charge. An electrostatic charge above a certain limit, however, can increase the risk of ESD. Therefore, when using the computer close to an appliance that can produce negative ions, give special attention to the following:
Avoid directly exposing your computer to the air from an appliance that can produce negative ions.
Keep your computer and peripherals as far as possible from such an appliance.
Wherever possible, ground your computer to facilitate safe electrostatic discharge.
Note: Not all such appliances cause a significant electrostatic charge.
Be gentle with your computer
Avoid placing any objects (including paper) between the display and the keyboard or the palm rest.
Your computer display is designed to be opened and used at an angle slightly greater than 90 degrees. Do not open the display beyond 180 degrees, as this might damage the computer hinge.
Do not turn your computer over while the ac power adapter is plugged in. This could break the adapter plug.
Carry your computer properly
Before moving your computer, be sure to remove any media, turn off attached devices, and disconnect cords and cables.
When picking up your open computer, hold it by the bottom. Do not pick up or hold your computer by the display.
Handle storage media and drives properly
Store your external hard disk drive in the appropriate containers or packaging when they are not being used.
Before you install a memory card such as an SD card, SDHC card, SDXC card, and a MultiMediaCard, touch a metal table or a grounded metal object. This action reduces any static electricity from your body. The static electricity could damage the device.
When transferring data to or from a flash media card, such as an SD card, do not put your computer in sleep or hibernation mode before the data transfer is complete; otherwise, your data could become damaged.
Take care in setting passwords
Remember your passwords. If you forget a supervisor or hard disk password, Lenovo will not reset it, and you might have to replace your system board or solid-state drive.
Chapter 7. Preventing problems 87
Register your computer
Register your ThinkPad computer with Lenovo. For more information, see Registering your computer on page 17.
Be sure not to modify your computer
Only an authorized ThinkPad repair technician should disassemble and repair your computer.
Do not modify or tape the latches to keep the display open or closed.
Cleaning the cover of your computer Occasionally clean your computer by doing the following:
1. Prepare a mixture of a gentle kitchen-use detergent (one that does not contain abrasive powder or strong chemicals such as acid or alkaline). Use 5 parts water to 1 part detergent.
2. Absorb the diluted detergent into a sponge.
3. Squeeze excess liquid from the sponge.
4. Wipe the cover with the sponge, using a circular motion and taking care not to let any excess liquid drip.
5. Wipe the surface to remove the detergent.
6. Rinse the sponge with clean running water.
7. Wipe the cover with the clean sponge.
8. Wipe the surface again with a dry, soft, lint-free cloth.
9. Wait for the surface to dry completely and remove any fibers from the cloth.
Cleaning your computer keyboard
To clean the computer keyboard, do the following:
1. Apply some isopropyl rubbing alcohol to a soft, dust-free cloth.
2. Wipe each keytop surface with the cloth. Wipe the keys one by one; if you wipe several keys at a time, the cloth might hook onto an adjacent key and possibly damage it. Ensure that no liquid drips onto or between the keys.
3. Allow to dry.
4. To remove any crumbs or dust from beneath the keys, you can use a camera blower with a brush or cool air from a hair dryer.
Note: Avoid spraying cleaner directly onto the display or the keyboard.
Cleaning your computer display
To clean the computer display, do the following:
1. Gently wipe the display with a dry, soft lint-free cloth. If you see a scratchlike mark on your display, it might be a stain transferred from the keyboard or the TrackPoint pointing stick when the cover was pressed from the outside.
2. Wipe or dust the stain gently with a soft, dry cloth.
3. If the stain remains, moisten a soft, lint-free cloth with water or a 50-50 mixture of isopropyl alcohol and water that does not contain impurities.
4. Wring out as much of the liquid as you can.
5. Wipe the display again; do not let any liquid drip into the computer.
6. Be sure to dry the display before closing it.
88 User Guide
Chapter 8. Troubleshooting computer problems
This chapter provides information on what to do if you experience a problem with your computer.
Diagnosing problems on page 89
Troubleshooting on page 89
Diagnosing problems If you experience problems with your computer, use the Lenovo Solution Center program as a starting point for solving them.
The Lenovo Solution Center program enables you to troubleshoot and resolve computer problems. It combines diagnostic tests, system information collection, security status, and support information, along with hints and tips for maximum system performance.
Notes:
The Lenovo Solution Center program can be downloaded from www.lenovo.com/diags.
If you are using other Windows operating system rather than Windows 7 and Windows 8, go to http://www.lenovo.com/diagnose for the latest information on diagnostics for your computer.
If your computer is installed with the Windows 7 operating system, when you are setting up your computer, the Lenovo Solution Center program prompts you to create recovery media, which you can use to restore the hard disk drive to the factory default state. For more information, see Creating and using recovery media on page 57.
To run the Lenovo Solution Center program, see Lenovo programs on page 12.
For additional information, refer to the Lenovo Solution Center help system.
Note: If you are unable to isolate and repair the problem yourself after running the program, save and print the log files. You will need the log files when you speak to a Lenovo technical support representative.
Troubleshooting If your computer has an error, it typically displays a message or an error code, or a beep sounds when you turn it on. When you experience a problem, refer to the corresponding sections in this topic to try to solve the problem by yourself.
Computer stops responding Print these instructions now and keep it with your computer for reference later.
If your computer is completely unresponsive (you cannot use the UltraNav pointing device or the keyboard), do the following:
1. Press and hold the power button for four seconds or more to turn off the computer, and then restart the computer by pressing the power button.
Note: If you cannot turn off your computer, or if you cannot restart it, continue with step 2.
Copyright Lenovo 2012 89
2. Remove the ac power adapter from the computer, and reset the system by inserting a straightened paper clip into the emergency reset hole. To locate the reset hole, refer to Bottom view on page 6. Reattach the ac power adapter.
Notes:
If the computer does not turn on, continue with step 3.
If the computer starts with ac power but does not start when ac power is disconnected, call the Customer Support Center for support. Go to http://www.lenovo.com/support/phone for the latest list of support phone numbers for your country or region.
3. Remove all external devices that are attached to your computer (keyboard, mouse, printer, scanner, and so on). Repeat step 2.
If the computer still does not start up, call the Customer Support Center and a customer support specialist will assist you.
Spills on the keyboard With a mobile computer, there are increased chances of spilling liquids on the keyboard. Because most liquids conduct electricity, liquid spilled on the keyboard could create numerous short circuits, potentially causing irreparable damage to your computer.
If you spill something on your computer:
Attention: Ensure that no liquid creates a short circuit between you and the ac power adapter (if in use). Although you might lose some data or work by turning off the computer immediately, leaving the computer on might make your computer unusable.
1. Carefully unplug the ac power adapter immediately.
2. Turn off the computer immediately. If the computer does not turn off, reset the system by inserting one end of a needle or a straightened paper clip into the emergency reset hole. To locate the reset hole, refer to Bottom view on page 6. The more quickly you stop the current from passing through the computer the more likely you will reduce damage from short circuits.
3. Wait until you are certain that all the liquid is dry before turning on your computer.
Error messages Message: 0177: Bad SVP data, stop POST task.
Solution: Checksum of the supervisor password in the EEPROM is not correct. The system board should be replaced. Have the computer serviced.
Message: 0183: Bad CRC of Security Settings in EFI Variable. Enter ThinkPad Setup.
Solution: Checksum of the Security settings in the EFI Variable is not correct. Enter ThinkPad Setup to check Security settings, Press F10 and then press Enter to restart the system. If you still have a problem, have the computer serviced.
Message: 0187: EAIA data access error
Solution: The access to EEPROM is failed. Have the computer serviced.
Message: 0188: Invalid RFID Serialization Information Area.
90 User Guide
Solution: The EEPROM checksum is not correct (block # 0 and 1). The system board should be replaced, and the box serial number needs to be reinstalled. Have the computer serviced.
Message: 0189: Invalid RFID configuration information area
Solution: The EEPROM checksum is not correct (block # 4 and 5). The system board should be replaced, and the UUID needs to be reinstalled. Have the computer serviced.
Message: 0190: Critical low-battery error
Solution: The computer turned off, because the battery is low. Connect the ac adapter to the computer and charge the battery.
Message: 0191: System Security - Invalid remote change requested.
Solution: The system configuration change has failed. Confirm the operation and try again. To clear the error, enter the ThinkPad Setup.
Message: 0199: System Security - Security password retry count exceeded.
Solution: This message is displayed if you enter a wrong supervisor password more than three times. Confirm the supervisor password and try again. To clear the error, enter the ThinkPad Setup.
Message: 1802: Unauthorized network card is plugged in - Power off and remove the network card.
Solution: The Ethernet PCI Express Mini Card is not supported on this computer. Remove it.
Message: 1820: More than one external fingerprint readers are attached. Power off and remove all but the reader that you set up within your main operating system.
Solution: Power off and remove all but the reader that you set up within your main operating system.
Message: 2100: Initialization error on HDD0 (Main hard disk drive)
Solution: The hard disk is not working. Have the hard disk serviced.
Message: 2110: Read error on HDD0 (Main hard disk drive)
Solution: The hard disk is not working. Have the hard disk serviced.
Message: 2200: Machine Type and Serial Number are invalid.
Solution: Machine Type and Serial Number are invalid. Have the computer serviced.
Message: 2201: Machine UUID is invalid.
Solution: Machine UUID is invalid. Have the computer serviced.
Message: Fan error
Solution: Cooling fan has failed. Have the computer serviced.
Message: Thermal sensing error
Chapter 8. Troubleshooting computer problems 91
Solution: The thermal sensor has problem. Shut down the computer immediately and have the computer serviced.
Message: This system supports only batteries specially designed for this specific system and manufactured by Lenovo or an authorized builder. The system does not support unauthorized batteries or batteries designed for other systems. If an unauthorized battery or a battery designed for another system is installed, the system will not charge. Press the ESC key to continue.
Attention: Lenovo has no responsibility for the performance or safety of unauthorized batteries, and provides no warranties for failures or damage arising out of their use.
Solution: Replace the battery with the correct Lenovo battery for this system. If you still see the same error message, contact with Lenovo service to have the computer serviced.
Message: The battery installed is not supported by this system and will not charge. Please replace the battery with the correct Lenovo battery for this system. Press the ESC key to continue.
Solution: Replace the battery with the correct Lenovo battery for this computer. If you still see the same error message, contact Lenovo service to have the computer serviced.
Errors without messages Problem: My screen keeps blanking when I do not want it to.
Solution: If you system is preinstalled with the Windows 7 operating system, you can disable any system timers, such as the LCD turn-off timer or the blank timer by doing the following:
1. Start Power Manager.
2. Click the Power plan tab, and then select Maximum Performance from the predefined power plans.
Problem: When I turn on the computer, nothing is displayed on the screen and the computer does not beep while starting up.
Note: If you are not sure whether you heard any beeps, turn off the computer by pressing and holding the power button for four seconds or more. Turn it on and listen again.
Solution: Ensure that:
The ac power adapter is connected to the computer and the power cord is plugged into a working electrical outlet.
The computer is turned on. (Turn the power button on again for confirmation.)
If a power-on password is set:
Press any key to display the prompt for the power-on password. If the brightness level of the screen is low, increase it by pressing Home.
Type the correct password and press Enter.
If these items are correctly set, and the screen remains blank, have the computer serviced.
Problem: When I turn on the computer, only a white cursor is displayed on a blank screen.
Solution: If you have modified a partition on your solid-state drive by using partition software, information about that partition, or the master boot record might have been destroyed.
1. Turn off the computer, and then turn it on again.
2. If you still see only the cursor on the screen, do the following:
If you have used the partition software, examine the partition on the solid-state drive by using the software, and recover the partition if required.
92 User Guide
If your system is installed with the Windows 7 operating system, use Rescue and Recovery workspace or the recovery discs to restore the system to the factory state.
If your system is installed with the Windows 8 operating system, use either the Remove everything and reinstall Windows function or the recovery discs to restore the system to the factory state.
If the problem persists, have the computer serviced.
Problem: My screen goes blank while the computer is on.
Solution: Your screen saver or power management might have been enabled. Do either of the following:
Touch the TrackPoint pointing device or the touch pad, or press a key to exit the screen saver.
Press the power button to resume from sleep or hibernation mode.
Beep errors Table 8. Beep errors
Problem Solution
One short beep, pause, three short beeps, pause, three more short beeps, and one short beep
Ensure that memory modules are installed correctly. If they are, and you still hear the beeps, have the computer serviced.
One long and two short beeps The video function has a problem. Have the computer serviced.
Three short beeps, pause, one short beep, pause, one more short beep, and three short beeps
PCI resource allocation failure. Power off and remove device from ExpressCard Slot. If the beeps persist, have the computer serviced.
Four cycles of four short beeps The Security Chip has a problem. Have the computer serviced.
Five short beeps The system board has a problem. Have the computer serviced.
Memory module problems Print these instructions now and keep it with your computer for reference later.
If your memory module is not operating properly, check the following items:
1. Check for error messages during startup.
Follow the appropriate corrective actions for power-on self-test (POST) error messages.
2. Verify that the latest UEFI for your model has been installed.
3. Verify the proper memory configuration and compatibility including the maximum memory size and the memory speed.
4. Run the Lenovo Solution Center program.
Networking problems The following are the most common networking problems.
Ethernet problems Problem: Your computer cannot connect to the network.
Solution: Ensure that:
The Lenovo USB 2.0 Ethernet Adapter is connected correctly to your computer.
Chapter 8. Troubleshooting computer problems 93
The cable is installed correctly.
The network cable must be securely connected both to the Lenovo USB 2.0 Ethernet Adapter and to the RJ45 connector of the hub. The maximum allowable distance from the computer to hub is 100 meters. If the cable is connected and the distance is within acceptable limit but the problem persists, try a different cable.
You are using the correct device driver.
1. Open Control Panel and click Hardware and Sound Device Manager. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
2. If the exclamation mark ! is displayed next to the adapter name under Network adapters, you might not be using the correct driver or the driver might have been disabled. To update the driver, right-click the highlighted adapter.
3. Click Update Driver Software, and then follow the instructions on the screen.
The switch port and the adapter have the same duplex setting.
If you configured the adapter for full duplex, ensure that the switch port also is configured for full duplex. Setting the wrong duplex mode can degrade performance, cause data loss, or result in lost connections.
You have installed all networking software that is necessary for your network environment.
Check with your LAN administrator for the necessary networking software.
Problem: The adapter stops working for no apparent reason.
Solution: The network driver files might be corrupt or missing. Update the driver by referring to the proceeding solution for the procedure to ensure that the correct device driver is installed.
Problem: If your computer is a Gigabit Ethernet model and you use a speed of 1000 Mbps, the connection fails or errors occur.
Solution:
Use Category 5 wiring and make sure that the network cable is securely connected.
Connect to a 1000 BASE-T hub/ switch (not 1000 BASE-X)
Problem: If your computer is a Gigabit Ethernet model, it cannot connect to the network at 1000 Mbps. Instead, it connects at 100 Mbps.
Solution:
Try another cable.
Make sure that the link partner is set to auto-negotiate.
Make sure that the switch is 802.3ab-compliant (gigabit over copper)
A wireless LAN problem Problem: You cannot connect to the network using the built-in wireless network card.
Solution: Make sure that:
Your wireless LAN driver is the latest version.
your computer is within range of a wireless access point.
The wireless radio is enabled.
94 User Guide
Make sure that the wireless radio is enabled by double-clicking the Access Connections icon in the Windows notification area.
For Windows 7 operating system, check the Network Name (SSID) and your encryption information. Use the Access Connections program to verify this case-sensitive information.
A wireless WAN problem Problem: A message is displayed indicating that an unauthorized WAN card is installed.
Solution: The WAN card is not supported on this computer. Call Lenovo Customer Service Center to have it serviced
Note: Depending on your computer, some models do not have a wireless WAN card.
Bluetooth problems Problem: Sound does not come from the Bluetooth headset/headphone but comes from the local
speaker even though the Bluetooth headset/headphone is connected using a Headset profile or AV profile.
Solution: Do the following:
1. Exit the program that uses the sound device (for example, Windows Media Player).
2. Open Control Panel and click Hardware and Sound Sound Playback.
3. If you are using a Headset profile, select Bluetooth Hands-free Audio and click the Set Default button. If you are using an AV profile, select Stereo Audio and click the Set Default button.
4. Click OK to close the Sound window.
Problem: PIM items sent from the Windows 7 operating systems cannot be received correctly into the address book of any other Bluetooth-enabled device.
Solution: The Windows 7 operating system send PIM items in XML format, but most Bluetooth-enabled devices handle PIM items in vCard format. If another Bluetooth-enabled device can receive a file through Bluetooth, a PIM item sent from the Windows 7 might be saved as a file with the extension .contact.
Problems with the keyboard and other pointing devices The following are the most common problems with keyboards and other pointing devices.
UltraNav pointing device problems Problem: The pointer drifts when the computer is turned on or after it resumes normal operation.
Solution: The pointer might drift when you are not using the TrackPoint pointing device during normal operation. This is a normal characteristic of the TrackPoint pointing device and is not a defect. Pointer drifting might occur for several seconds under the following conditions:
When the computer is turned on
When the computer resumes normal operation
When the TrackPoint pointing device is kept pressed for a long time
When the temperature changes
Problem: The TrackPoint pointing device or touch pad does not work.
Solution: Ensure that the TrackPoint pointing device or touch pad is enabled in the UltraNav Device Setting window.
Keyboard problems Problem: All or some keys on the keyboard do not work.
Chapter 8. Troubleshooting computer problems 95
Solution: If an external numeric keypad is connected:
1. Turn off the computer.
2. Remove the external numeric keypad.
3. Turn on the computer and try using the keyboard again.
If the keyboard problem is resolved, carefully reconnect the external numeric keypad and the external keyboard. Ensure that you have seated the connectors correctly.
If the problem persists, ensure that the correct device driver is installed.
1. Open Control Panel. Change the view of Control Panel from Category to Large icons or Small icons.
2. Click Keyboard.
3. Select the Hardware tab. In the Device Properties pane, ensure that you see this message: Device Status: This device is working properly.
If keys on the keyboard still do not work, have the computer serviced.
Problem: All or some keys on the external numeric keypad do not work.
Solution: Ensure that the external numeric keypad is correctly connected to the computer.
Problems with the display and multimedia devices This topic includes the most common problems with displays and multimedia devices, including the computer display, the external monitor, audio devices, and the optical drive.
Computer screen problems Problem: The screen is blank.
Solution: Do the following:
Press Fn+F7 to bring up the image.
If you are using the ac power adapter, or using the battery and the battery status indicator is on (is green), press Fn+F9 to make the screen brighter.
If the sleep status indicator is on (is green), press Fn to resume from the sleep mode.
If the problem persists, follow the solution for the problem below.
Problem: The screen is unreadable or distorted.
Solution: Ensure that:
The display device driver is installed correctly.
The screen resolution and color quality are correctly set.
The monitor type is correct.
To check these settings, do the following:
1. Right-click on the desktop, and click Personalize.
2. Click Display at the left.
3. Select Change display settings. Check whether the screen resolution is correctly set.
4. Click Advanced Settings.
5. Click the Adapter tab. Ensure that the correct device driver name is shown in the adapter information window.
Note: The device driver name depends on the video chip that has been installed on your computer.
6. Click the Monitor tab. Ensure that the correct device driver name is shown in the adapter information window.
96 User Guide
7. Click the Properties button. If you are prompted for an administrator password or confirmation, type the password or provide confirmation. Check the Device status box and make sure that the device is working correctly. If not, click the Troubleshoot button and follow the instructions on the screen.
8. Click the Color Management tab. Check whether the color quality is correctly set, and ensure that the other information also is correct. If you are prompted for an administrator password or confirmation, type the password or provide confirmation. Check the Device status box and ensure that the device is working correctly. If not, click the Troubleshoot button and follow the instructions on the screen.
Problem: Incorrect characters are displayed on the screen.
Solution: Did you install the operating system or application program correctly? If they are installed and configured correctly, have the computer serviced.
Problem: The screen stays on even after you turn off your computer.
Solution: Press and hold the power button for four seconds or more to turn off your computer; then turn it on again.
Problem: Missing, discolored, or bright dots appear on the screen every time you turn on your computer.
Solution: This is an intrinsic characteristic of the TFT technology. Your computer display contains multiple thin-film transistors (TFTs). A small number of missing, discolored, or bright dots on the screen might exist all the time.
External monitor problems Problem: The external monitor is blank.
Solution: To bring up the image, press Fn+F7 and select the desired monitor. If the problem persists, do the following:
1. Connect the external monitor to another computer to ensure that it works.
2. Reconnect the external monitor to your computer.
3. Refer to the manual shipped with the external monitor to check the resolutions and refresh rates that are supported.
If the external monitor supports the same resolution as the computer display or a higher resolution, view output on the external monitor or on both the external monitor and the computer display.
If the external monitor supports a lower resolution than the computer display, view output on the external monitor only. (If you view output on both the computer display and the external monitor, the external monitor screen will be blank or distorted.)
Problem: You cannot set a higher resolution than the present one on your external monitor.
Solution: Ensure that the monitor type and other information is correct. If necessary, update the monitor driver. See Setting the external monitor type on page 35.
Problem: The screen is unreadable or distorted.
Solution: Ensure that:
The monitor information is correct and the appropriate monitor type is selected. Refer to the solution to the proceeding problem.
Ensure that an appropriate refresh rate is selected by doing the following:
1. Connect the external monitor to the monitor connector, and then connect the monitor to an electrical outlet.
2. Turn on the external monitor and the computer.
3. Right-click on the desktop, and click Screen resolution.
Chapter 8. Troubleshooting computer problems 97
Note: If your computer cannot detect the external monitor, click the Detect button.
4. Click the icon for the desired monitor (the Monitor-2 icon is for the external monitor).
5. Click Advanced Settings.
6. Click the Monitor tab.
7. Select the correct screen refresh rate.
Problem: Wrong characters are displayed on the screen.
Solution: Did you follow the correct procedure when installing the operating system or program program? If you did, have the external monitor serviced.
Problem: The Extend desktop function does not work.
Solution: Enable the Extend desktop function by doing the following:
1. Connect the external monitor to the monitor connector, and then connect the monitor to an electrical outlet.
2. Turn on the external monitor and the computer.
3. Right-click on the desktop, and click Screen resolution.
4. Click the Monitor-2 icon.
5. Select Extend these displays for multiple displays.
6. Click the Monitor-1 icon (for the primary display, the computer display).
7. Set the resolution for the primary display.
8. Click the Monitor-2 icon (for the external monitor).
9. Set the screen resolution for the secondary display.
10. Set the relative position of each monitor by dragging its icon. You can set the monitors in any relative position, but the icons must touch each other.
11. Click OK to apply the changes.
Note: To change the color settings, right-click on the desktop, and click Screen resolution. Click Advanced Settings, select the Monitor tab, then set Colors.
Problem: If you use the Extend desktop function, you cannot set a higher resolution or higher refresh rate on the secondary display.
Solution: Change the resolution and the color depth to lower settings for the primary display.
Problem: Display switching does not work.
Solution: If you use the Extend desktop function, disable it, and change the display output location. If a DVD movie or a video clip is playing, stop the playback, close the program, and then change the display output location.
Problem: The screen position on the external monitor is incorrect when that monitor is set for a high resolution.
Solution: Sometimes, when you use a high resolution such as 1600x1200, the image is shifted to left or right on the screen. To correct this, first ensure that your external monitor supports the display mode (the resolution and the refresh rate) that you have set. If it does not, set a display mode that the monitor supports. If it does support the display mode you have set, go to the setup menu for the monitor itself and adjust the settings there. Usually the external monitor has buttons for access to the setup menu. For details, see the documentation that comes with the monitor.
Audio problems Problem: Wave or MIDI sound does not play correctly.
98 User Guide
Solution: Ensure that the built-in audio device is configured correctly.
1. Open Control Panel.
2. Click Hardware and Sound.
3. Click Device Manager. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
4. Double-click Sound, video and game controllers.
5. Make sure that the Realtek HD Audio driver is enabled and configured correctly.
Problem: Sound does not come from a headphone or a speaker, or your computer cannot record sounds.
Solution: To switch from one device to another (for example, from a speaker to a headphone, or from an external microphone to a built-in microphone), do the following:
1. Open Control Panel and click Hardware and Sound.
2. Click the Realtek HD Audio Manager icon.
3. Make sure that you are in MULTI-STREAM mode in the Device advanced settings window.
4. In the Volume Mixer window, select the device you want-for example, speakers.
5. Play any sound via a music program (for example, Windows Media Player). Make sure that sound comes from speakers now.
6. Then, if you would like to switch to a headphone, close the music program.
7. Go to the Volume Mixer window. Then select another device, which is now the headphone.
8. Play any sound via the music program. Make sure that sound comes from a headphone attached directly to the system.
For more information, refer to the help information system of Realtek HD Audio Manager.
Note: In the Volume Mixer window of Realtek HD Audio Manager, a check mark by the entry for a device, such as speakers for a playback device, or a microphone for a recording device, shows that the device has been selected.
Problem: Recordings made using the microphone input are not loud enough.
Solution: Ensure that the Microphone Boost function is turned on and set by doing the following:
1. Open Control Panel and click Hardware and Sound.
2. Click Sound.
3. Click the Recording tab in the Sound window.
4. Select Microphone, and click the Properties button.
5. Click the Levels tab, and move the Microphone Boost slider upwards.
6. Click OK.
Note: For details about controlling volume, refer to your Windows online help.
Problem: A volume or balance slider cannot be moved.
Solution: The slider might be grayed out. This means that its position is fixed by the hardware and cannot be changed.
Problem: The volume sliders do not stay in place when some audio programs are used.
Solution: It is normal for the sliders to change position when certain sound programs are used. The programs are aware of the settings in the Volume Mixer window and are allowed to change the settings themselves. An example is the Windows Media Player. Usually the program has sliders available to control the sound from within the program.
Chapter 8. Troubleshooting computer problems 99
Problem: The balance slider cannot completely mute one channel.
Solution: The control is designed to compensate for minor differences in balance and does not completely mute either channel.
Problem: There is no volume control for MIDI sound in the Volume Mixer window.
Solution: Use the hardware volume control. This is because the built-in synthesizer software does not support the control.
Problem: The sound cannot be turned off completely even if you set the volume at minimum.
Solution: You still can hear some sound even though you have set the Volume Mixer control at minimum. To turn off the sound completely, press the speaker mute button.
Problem: When you connect a headphone to your computer while playing sound, a speaker does not produce sound.
Solution: Once the headphone is attached, the streaming is automatically redirected to it. If you want to listen to sound from the speakers again, be sure to set those speakers as the default device. For details, refer to the help information system for Realtek HD Audio.
Fingerprint reader problems Problem: The surface of the reader is dirty, stained, or wet.
Solution: Gently clean the surface of the reader with a dry, soft, lint-free cloth.
Problem: The reader often fails to enroll or authenticate your fingerprint.
Solution: If the surface of the reader is dirty, stained, or wet, gently clean the surface of the reader with a dry, soft, lint-free cloth.
For tips on how to maintain the fingerprint reader, refer to Using a fingerprint reader on page 51.
Battery and power problems This topic contains instructions on troubleshooting battery and power problems.
Battery problems Problem: The battery pack cannot be fully charged in the standard charge time when the computer is
powered off.
Solution: The battery pack might be over-discharged. Do the following:
1. Turn off the computer.
2. Connect the ac power adapter to the computer and let it charge.
If a quick charger is available, use it to charge the over-discharged battery pack.
If the battery pack cannot be fully charged in 24 hours, call Lenovo Customer Service Center to have it serviced.
Problem: Your computer shuts down before the battery status indicator shows empty, or your computer operates after the battery status indicator shows empty.
Solution: Discharge and recharge the battery pack.
Problem: The operating time for a fully charged battery pack is short.
Solution: Discharge and recharge the battery pack. If your battery operating time is still short, call Lenovo Customer Service Center to have it serviced.
Problem: The computer does not operate with a fully charged battery pack.
100 User Guide
Solution: The surge protector in the battery pack might be active. Turn off the computer for one minute to reset the protector; then turn on the computer again.
Problem: The battery pack cannot be charged.
Solution: You cannot charge the battery when it is too hot. Turn off the computer and allow it to cool to room temperature. If it still cannot be charged, call Lenovo Customer Service to have it serviced.
An ac power adapter problem Problem: The ac power adapter is connected to the computer and the working electrical outlet, but the power adapter (power plug) icon is not displayed on the taskbar. Also the ac power indicator does not light up.
Solution: Do the following:
1. Ensure that the connection of the ac power adapter is correct. For instructions on connecting the ac power adapter, see the Safety, Warranty, and Setup Guide that comes with your computer.
2. If the connection of the ac power adapter is correct, turn off the computer, then disconnect the ac power adapter.
3. Reconnect the ac power adapter, then turn on the computer.
4. If the power adapter icon still is not displayed in the Windows notification area and the ac power indicator does not light up, have the ac power adapter and your computer serviced.
Power problems Print these instructions now and keep it with your computer for reference later.
If your computer is getting no power at all, check the following items:
1. Verify the power button. Refer to System status indicators on page 6. The power button is illuminated whenever the computer is on.
2. Check all power connections. Remove any power strips and surge protectors to connect the ac power adapter directly to the ac power outlet.
3. Inspect the ac power adapter. Check for any physical damage, and ensure that the power cable is firmly attached to the adapter brick and the computer.
4. Verify the ac power source is working by attaching another device to the outlet.
If your computer does not run on battery power, do the following:
1. If the battery runs out of power, attach ac power adapter to recharge the battery.
2. If the battery is charged but the computer does not run, call Lenovo Customer Service Center to have it serviced.
A power button problem Problem: The system does not respond, and you cannot turn off the computer.
Solution: Turn off the computer by pressing and holding the power button for four seconds or more. If the system is still not reset, remove the ac power adapter and reset the system by inserting a straightened paper clip into the emergency reset hole. To locate the emergency reset hole, refer to Bottom view on page 6.
Boot problems Print these instructions now and keep them with your computer for reference later.
If you receive an error message before the operating system loads, follow the appropriate corrective actions for POST error messages.
Chapter 8. Troubleshooting computer problems 101
If you receive an error message while the operating system is loading the desktop configuration after the POST is completed, check the following items:
1. Go to the Lenovo Support Web site at http://www.lenovo.com/support and search for the error message.
2. Go to the Microsoft Knowledge Base homepage at http://support.microsoft.com/ and search for the error message.
Sleep and hibernation problems Problem: The computer enters sleep mode unexpectedly.
Solution: If the microprocessor overheats, the computer automatically enters sleep mode to allow the computer to cool and to protect the microprocessor and other internal components. Check the settings for sleep mode.
Problem: The computer enters sleep mode (the sleep indicator turns on) immediately after the power-on self-test.
Solution: Ensure that:
The battery is charged.
The operating temperature is within the acceptable range. Refer to Operating environment on page 11.
If the battery is charged and the temperature is within range, have the computer serviced.
Problem: A critical low-battery error occurs, and the computer immediately turns off.
Solution: The battery power is getting low. Connect the ac power adapter to the computer and plug it into an electrical outlet.
Problem: The computer display remains blank after you press Fn to return from sleep mode.
Solution: Check whether an external monitor was disconnected or turned off while the computer was in sleep mode. If you disconnected or turned off the external monitor, connect it or turn it on before resuming the computer from the sleep mode. When resuming the computer from the sleep mode without attaching the external monitor or turning it on, and the computer display remains blank, press Fn+F7 to bring up the computer display.
Problem: The computer does not return from sleep mode, or the sleep indicator stays on and the computer does not work.
Solution: If the system does not return from sleep mode, it might have entered sleep or hibernation mode automatically because the battery is depleted. Check the sleep indicator.
If the sleep indicator is on, your computer is in sleep mode. Connect the ac power adapter to the computer; then press Fn.
If the sleep indicator is off, your computer is in hibernation mode or power-off state. Connect the ac power adapter to the computer; then press the power button to resume operation.
If the system still does not return from sleep mode, your system might stop responding and you might not be able to turn off the computer. In this case, you need to reset the computer. If you have not saved your data, it might be lost. To reset the computer, press and hold the power button for 4 seconds or more. If the system is still not reset, remove the ac power adapter and reset the system by inserting a straightened paper clip into the emergency reset hole. To locate the emergency reset hole, refer to Bottom view on page 6
Problem: Your computer does not enter sleep or hibernation mode.
Solution: Check whether any option has been selected to disable your computer from entering sleep or hibernation mode.
102 User Guide
If your computer tries to enter sleep mode but the request is rejected, the device attached to the USB connector might have been disabled. If this occurs, do a hot-unplug-and-plug operation for the USB device.
Problem: The battery discharges slightly while the computer is in hibernation mode.
Solution: If the wakeup function is enabled, the computer consumes a small amount of power. This is not a defect. For details, refer to Power-saving modes on page 29.
Solid-state drive problems Problem: When you compress files or folders by use of the data compression function in Windows, and then decompress them, the process of writing to or reading from the files or folders is slow.
Solution: Apply the disk defragmentation tool in Windows for faster access to the data.
Software problems Problem: An program does not run correctly.
Solution: Ensure that the problem is not being caused by the program.
Check that your computer has the minimum required memory to run the program. Refer to the manuals supplied with the program.
Check the following:
The program is designed to operate with your operating system.
Other programs run correctly on your computer.
The necessary device drivers are installed.
The program works when it is run on some other computer.
If an error message is displayed while you are using the program, refer to the manuals supplied with the program.
If the program still does not run correctly, contact your place of purchase or a service representative for help.
USB problems Problem: A device connected to the USB connector does not work.
Solution: Open the Device Manager window. Make sure that the USB device setup is correct, and that the assignment of computer resource and the installation of the device driver are correct. To open the Device Manager window, go to Control Panel and click Hardware and Sound Device Manager. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
Chapter 8. Troubleshooting computer problems 103
104 User Guide
Chapter 9. Getting support
This chapter provides information about getting help and support from Lenovo.
Before you contact Lenovo on page 105
Getting help and service on page 105
Purchasing additional services on page 107
Before you contact Lenovo Often, you can solve your computer problems by referring to the information in the explanations of error codes, running diagnostic programs, or by consulting the Lenovo Web site.
Registering your computer
Register your computer with Lenovo. For more information, see Registering your computer on page 17.
Downloading system updates
Downloading updated software might resolve problems you experience with your computer.
To download updated software, go to the following Web site and follow the instructions on the screen: http://www.lenovo.com/support
Recording information
Before you talk to a Lenovo representative, record the following important information about your computer.
Recording problem symptoms and details
Collect the answers to the questions below before you call for help. Then, you will be able to get help as quickly as possible.
What is the problem? Is it continuous or intermittent?
Is there an error message? What is the error code, if any?
What operating system are you using? Which version?
Which software programs were running at the time of the problem?
Can the problem be reproduced? If so, how?
Recording system information
The serial number label is on the bottom of your computer. Record the machine type and the serial number.
What is the name of your Lenovo product?
What is the machine type?
What is the serial number?
Getting help and service If you need help, service, technical assistance, or just want more information about Lenovo products, you will find a wide variety of sources available from Lenovo to assist you. This section contains information about where to go for additional information about Lenovo and our products, what to do if you experience a problem with your computer, and whom to call for service should it be necessary.
Copyright Lenovo 2012 105
Information about your computer and preinstalled software, if any, is available in the documentation that comes with your computer. That documentation includes printed books, online books, readme files, and help files. In addition, information about Lenovo products is available on the World Wide Web.
Microsoft Service Packs are the latest software source for Windows product updates. They are available through Web download (connection charges might apply) or through disc. For more specific information and links, go to http://www.microsoft.com. Lenovo offers technical assistance with installation of, or questions related to, Service Packs for your Lenovo-preloaded Microsoft Windows product. For information, contact the Customer Support Center.
Using diagnostic programs Many computer problems can be solved without outside assistance. If you experience a problem with your computer, the first place to start is the troubleshooting information of your computer documentation. If you suspect a software problem, see the documentation, including readme files and help information systems, that comes with the operating system or application program.
ThinkPad notebook computers come with a set of diagnostic programs that you can use to help you identify hardware problems. See Diagnosing problems on page 89 for instructions on using the diagnostic programs.
The troubleshooting information or the diagnostic programs might tell you that you need additional or updated device drivers or other software. You can get the latest technical information and download device drivers and updates from the Lenovo Web site at http://www.lenovo.com/support.
Lenovo Support Web site Technical support information is available on the Lenovo Support Web site at: http://www.lenovo.com/support
This Web site is updated with the latest support information such as the following:
Drivers and software
Diagnostic solutions
Product and service warranty
Product and parts details
User guides and manuals
Knowledge base and frequently asked questions
Calling Lenovo If you have tried to correct the problem yourself and still need help, during the warranty period, you can get help and information by telephone through the Customer Support Center. The following services are available during the warranty period:
Problem determination - Trained personnel are available to assist you with determining if you have a hardware problem and deciding what action is necessary to fix the problem.
Lenovo hardware repair - If the problem is determined to be caused by Lenovo hardware under warranty, trained service personnel are available to provide the applicable level of service.
Engineering change management - Occasionally, there might be changes that are required after a product has been sold. Lenovo or your reseller, if authorized by Lenovo, will make selected Engineering Changes (ECs) that apply to your hardware available.
The following items are not covered:
106 User Guide
Replacement or use of parts not manufactured for or by Lenovo or nonwarranted parts
Note: All warranted parts contain a 7-character identification in the format FRU XXXXXXX. Identification of software problem sources Configuration of UEFI BIOS as part of an installation or upgrade Changes, modifications, or upgrades to device drivers Installation and maintenance of network operating systems (NOS) Installation and maintenance of application programs
For the terms and conditions of the Lenovo Limited Warranty that applies to your Lenovo hardware product, see Warranty information in the Safety, Warranty, and Setup Guide that comes with your computer.
If possible, be near your computer when you make your call in case the technical assistance representative needs to help you resolve a computer problem. Ensure that you have downloaded the most current drivers and system updates, run diagnostics, and recorded information before you call. When calling for technical assistance, have the following information available: Machine type and model Serial numbers of your computer, monitor, and other components, or your proof of purchase Description of the problem Exact wording of any error messages Hardware and software configuration information for your system
Telephone numbers
For a list of the Lenovo Support phone numbers for your country or region, go to http://www.lenovo.com/support/phone or refer to the Safety, Warranty, and Setup Guide that comes with your computer.
Note: Phone numbers are subject to change without notice. The latest phone numbers are available at http://www.lenovo.com/support/phone. If the number for your country or region is not provided, contact your Lenovo reseller or Lenovo marketing representative.
Finding ThinkPad options If you want to expand the capabilities of your computer, Lenovo has a number of hardware accessories and upgrades to meet your needs. Options include power adapters, printers, scanners, keyboards, mic, and more.
You can shop at Lenovo 24 hours a day, 7 days a week directly over the World Wide Web. All you need is an Internet connection and a credit card.
To shop at Lenovo, go to: http://www.lenovo.com/accessories/services/index.html
Purchasing additional services During and after the warranty period, you can purchase additional services, such as support for Lenovo and non-Lenovo hardware, operating systems, and application programs; network setup and configuration services; upgraded or extended hardware repair services; and custom installations services. Service availability and service name might vary by country.
For more information about these services, go to: http://www.lenovo.com/accessories/services/index.html
Chapter 9. Getting support 107
108 User Guide
Appendix A. Regulatory information
Wireless related information Wireless interoperability
Wireless LAN PCI Express Mini Card is designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS), Complementary Code Keying (CCK), and/or Orthogonal Frequency Division Multiplexing (OFDM) radio technology, and is compliant to:
The 802.11b/g Standard, 802.11a/b/g or 802.11n draft 2.0 on Wireless LANs, as defined and approved by the Institute of Electrical and Electronics Engineers.
The Wireless Fidelity (WiFi) certification as defined by the Wi-Fi Alliance.
Your Bluetooth card is compliant with Bluetooth Specification 4.0 as defined by the Bluetooth Special Interest Group SIG. It supports the following profiles:
Advanced Audio Distribution Profile (A2DP)
Audio/Video Control Transport Protocol (AVCTP)
Audio/Video Distribution Transport Protocol (AVDTP)
A/V Remote Control Profile (AVRCP)
Basic Imaging Profile (BIP)
Basic Printing Profile (BPP)
Dial-Up Networking Profile (DUN)
File Transfer Profile (FTP)
Generic Access Profile (GAP)
Generic A/V Distribution Profile (GAVDP)
Hardcopy Cable Replacement Profile (HCRP)
Headset Profile (HSP)
Hands-Free Profile (HFP)
Human Interface Device Profile (HID)
Message Access Profile (MAP)
Object Exchange Protocol (OBEX)
Object Push Profile (OPP)
Personal Area Networking Profile (PAN)
Phone Book Access Profile (PBAP)
Service Discovery Protocol (SDP)
Synchronization Profile (SYNC)
Video Distribution Profile (VDP)
Generic Attribute Profile (GATT)
Proximity Profile
Find Me Profile
Immediate Alert Profile
Copyright Lenovo 2012 109
Usage environment and your health
Integrated wireless cards emit radio frequency electromagnetic energy like other radio devices. However, the level of energy emitted is far much less than the electromagnetic energy emitted by wireless devices like for example mobile phones.
Due to the fact that integrated wireless cards operate within the guidelines found in radio frequency safety standards and recommendations, Lenovo believes they are safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.
In some situation or environment, the use of integrated wireless cards might be restricted by the proprietor of the building or responsible representatives of the organization. These situations and areas might for example include:
Using the integrated wireless cards on board of airplanes, in hospitals or near petrol stations, blasting areas (with electro-explosive devices), medical implants or body-worn electronic medical devices, such as pace makers.
In any other environment where the risk of interference to other devices or services is perceived or identified as harmful.
If you are uncertain of the policy that applies to the use of wireless devices in a specific organization (such as airport or hospital), you are encouraged to ask for authorization to use integrated wireless cards prior to turning on the computer.
Location of the UltraConnect wireless antennas ThinkPad models feature an integrated diversity antenna system built into the display for optimal reception, enabling wireless communication wherever you are.
Note: Your computer might have slight variations from the following illustration.
1 Wireless WAN antenna (Auxiliary)
2 Wireless LAN combo antenna (Auxiliary)
3 Wireless LAN combo antenna (Main)
4 Wireless WAN antenna (Main)
110 User Guide
Locating wireless regulatory notices For more information about the wireless regulatory notices, refer to the Regulatory Notice shipped with your computer.
If your computer is shipped without the Regulatory Notice, you can find it on the Web site at: http://www.lenovo.com/ThinkPadUserGuides
Export classification notice This product is subject to the United States Export Administration Regulations (EAR) and has an Export Classification Control Number (ECCN) of 4A994.b. It can be re-exported except to any of the embargoed countries in the EAR E1 country list.
Electronic emission notices The following information refers to the ThinkPad X1 Carbon, machine type 3443, 3444, 3446, 3448, 3460, 3462, and 3463
Federal Communications Commission Declaration of Conformity This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult an authorized dealer or service representative for help.
Lenovo is not responsible for any radio or television interference caused by using other than specified or recommended cables and connectors or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Responsible Party: Lenovo (United States) Incorporated 1009 Think Place - Building One Morrisville, NC 27560 Phone Number: 919-294-5900
Industry Canada Class B emission compliance statement This Class B digital apparatus complies with Canadian ICES-003.
Appendix A. Regulatory information 111
Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada.
European Union - Compliance to the Electromagnetic Compatibility Directive This product is in conformity with the protection requirements of EU Council Directive 2004/108/EC on the approximation of the laws of the Member States relating to electromagnetic compatibility. Lenovo cannot accept responsibility for any failure to satisfy the protection requirements resulting from a non-recommended modification of the product, including the installation of option cards from other manufacturers.
This product has been tested and found to comply with the limits for Class B Information Technology Equipment according to European Standard EN 55022. The limits for Class B equipment were derived for typical residential environments to provide reasonable protection against interference with licensed communication devices.
EU contact: Lenovo, Einsteinova 21, 851 01 Bratislava, Slovakia
German Class B compliance statement Deutschsprachiger EU Hinweis:
Hinweis fr Gerte der Klasse B EU-Richtlinie zur Elektromagnetischen Vertrglichkeit Dieses Produkt entspricht den Schutzanforderungen der EU-Richtlinie 2004/108/EG (frher 89/336/EWG) zur Angleichung der Rechtsvorschriften ber die elektromagnetische Vertrglichkeit in den EU-Mitgliedsstaaten und hlt die Grenzwerte der EN 55022 Klasse B ein.
Um dieses sicherzustellen, sind die Gerte wie in den Handbchern beschrieben zu installieren und zu betreiben. Des Weiteren drfen auch nur von der Lenovo empfohlene Kabel angeschlossen werden. Lenovo bernimmt keine Verantwortung fr die Einhaltung der Schutzanforderungen, wenn das Produkt ohne Zustimmung der Lenovo verndert bzw. wenn Erweiterungskomponenten von Fremdherstellern ohne Empfehlung der Lenovo gesteckt/eingebaut werden.
Deutschland:
Einhaltung des Gesetzes ber die elektromagnetische Vertrglichkeit von Betriebsmitteln Dieses Produkt entspricht dem Gesetz ber die elektromagnetische Vertrglichkeit von Betriebsmitteln EMVG (frher Gesetz ber die elektromagnetische Vertrglichkeit von Gerten). Dies ist die Umsetzung der EU-Richtlinie 2004/108/EG (frher 89/336/EWG) in der Bundesrepublik Deutschland.
Zulassungsbescheinigung laut dem Deutschen Gesetz ber die elektromagnetische Vertrglichkeit von Betriebsmitteln, EMVG vom 20. Juli 2007 (frher Gesetz ber die elektromagnetische Vertrglichkeit von Gerten), bzw. der EMV EG Richtlinie 2004/108/EC (frher 89/336/EWG), fr Gerte der Klasse B.
Dieses Gert ist berechtigt, in bereinstimmung mit dem Deutschen EMVG das EG-Konformittszeichen - CE - zu fhren. Verantwortlich fr die Konformittserklrung nach Paragraf 5 des EMVG ist die Lenovo (Deutschland) GmbH, Gropiusplatz 10, D-70563 Stuttgart.
Informationen in Hinsicht EMVG Paragraf 4 Abs. (1) 4: Das Gert erfllt die Schutzanforderungen nach EN 55024 und EN 55022 Klasse B.
112 User Guide
Korea Class B compliance statement
Japan VCCI Class B compliance statement
Japan compliance statement for products which connect to the power mains with rated current less than or equal to 20 A per phase
Lenovo product service information for Taiwan
0800-666-975
Appendix A. Regulatory information 113
114 User Guide
Appendix B. WEEE and recycling statements
Lenovo encourages owners of information technology equipment to responsibly recycle their equipment when it is no longer needed. Lenovo offers a variety of programs and services to assist equipment owners in recycling their IT products. Information on product recycling offerings can be found on Lenovo's Internet site at http://www.lenovo.com/social_responsibility/us/en/.
Important WEEE information
The WEEE marking on Lenovo products applies to countries with WEEE and e-waste regulations (for example, European Directive 2002/96/EC, India E-Waste Management & Handling Rules, 2011). Appliances are labeled in accordance with local regulations concerning waste electrical and electronic equipment (WEEE). These regulations determine the framework for the return and recycling of used appliances as applicable within each geography. This label is applied to various products to indicate that the product is not to be thrown away, but rather put in the established collective systems for reclaiming these end of life products.
Users of electrical and electronic equipment (EEE) with the WEEE marking must not dispose of end of life EEE as unsorted municipal waste, but use the collection framework available to them for the return, recycle, and recovery of WEEE and to minimize any potential effects of EEE on the environment and human health due to the presence of hazardous substances. For additional WEEE information go to: http://www.lenovo.com/recycling
Japan recycling statements
Collecting and recycling a disused Lenovo computer or monitor
If you are a company employee and need to dispose of a Lenovo computer or monitor that is the property of the company, you must do so in accordance with the Waste Management and Public Cleansing Law. Computers and monitors are categorized as industrial waste and should be properly disposed of by an industrial waste disposal contractor certified by a local government. In accordance with the Waste Management and Public Cleansing Law, Lenovo Japan provides, through its PC Collecting and Recycling Services, for the collecting, reuse, and recycling of disused computers and monitors. For details, visit the Lenovo Web site at: http://www.lenovo.com/services_warranty/jp/ja/recycle/pcrecycle/.
Pursuant to the Waste Management and Public Cleansing Law, the collecting and recycling of home-used computers and monitors by the manufacturer was begun on October 1, 2003. This service is provided free of charge for home-used computers sold after October 1, 2003. For details, go to http://www.lenovo.com/services_warranty/jp/ja/recycle/personal/.
Copyright Lenovo 2012 115
Disposing of Lenovo computer components
Some Lenovo computer products sold in Japan may have components that contain heavy metals or other environmental sensitive substances. To properly dispose of disused components, such as a printed circuit board or drive, use the methods described above for collecting and recycling a disused computer or monitor.
Disposing of disused lithium batteries from Lenovo computers
A button-shaped lithium battery is installed on the system board of your Lenovo computer to provide power to the computer clock while the computer is off or disconnected from the main power source. If you want to replace it with a new one, ask for a repair service provided by Lenovo. If you use a Lenovo computer at home and need to dispose of a lithium battery, you must comply with local ordinances and regulations.
Disposing of a disused battery pack from Lenovo notebook computers
Your Lenovo notebook computer has a lithium ion battery pack or a nickel metal hydride battery pack. If you are a company employee who uses a Lenovo notebook computer and need to dispose of a battery pack, contact the proper person in Lenovo sales, service, or marketing, and follow that person's instructions. You also can refer to the instructions at http://www.lenovo.com/jp/ja/environment/recycle/battery/. If you use a Lenovo notebook computer at home and need to dispose of a battery pack, you must comply with local ordinances and regulations. You also can refer to the instructions at http://www.lenovo.com/jp/ja/environment/recycle/battery/.
Recycling information for Brazil
Declaraes de Reciclagem no Brasil
Descarte de um Produto Lenovo Fora de Uso
Equipamentos eltricos e eletrnicos no devem ser descartados em lixo comum, mas enviados pontos de coleta, autorizados pelo fabricante do produto para que sejam encaminhados e processados por empresas especializadas no manuseio de resduos industriais, devidamente certificadas pelos orgos ambientais, de acordo com a legislao local.
A Lenovo possui um canal especfico para auxili-lo no descarte desses produtos. Caso voc possua um produto Lenovo em situao de descarte, ligue para o nosso SAC ou encaminhe um e-mail para: reciclar@lenovo.com, informando o modelo, nmero de srie e cidade, a fim de enviarmos as instrues para o correto descarte do seu produto Lenovo.
Battery recycling information for Taiwan
116 User Guide
Battery recycling information for the European Union
Notice: This mark applies only to countries within the European Union (EU).
Batteries or packaging for batteries are labeled in accordance with European Directive 2006/66/EC concerning batteries and accumulators and waste batteries and accumulators. The Directive determines the framework for the return and recycling of used batteries and accumulators as applicable throughout the European Union. This label is applied to various batteries to indicate that the battery is not to be thrown away, but rather reclaimed upon end of life per this Directive.
In accordance with the European Directive 2006/66/EC, batteries and accumulators are labeled to indicate that they are to be collected separately and recycled at end of life. The label on the battery may also include a chemical symbol for the metal concerned in the battery (Pb for lead, Hg for mercury, and Cd for cadmium). Users of batteries and accumulators must not dispose of batteries and accumulators as unsorted municipal waste, but use the collection framework available to customers for the return, recycling, and treatment of batteries and accumulators. Customer participation is important to minimize any potential effects of batteries and accumulators on the environment and human health due to the potential presence of hazardous substances. For proper collection and treatment, go to: http://www.lenovo.com/recycling
Battery recycling information for the United States and Canada
Appendix B. WEEE and recycling statements 117
118 User Guide
Appendix C. ENERGY STAR model information
ENERGY STAR is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy aimed at saving money and protecting the environment through energy efficient products and practices.
Lenovo is proud to offer our customers products with the ENERGY STAR qualified designation. Lenovo computers of the following machine types, if the ENERGY STAR mark is affixed, have been designed and tested to conform to the ENERGY STAR program requirements for computers.
3443, 3444, 3446, 3448, 3460, 3462, and 3463
By using ENERGY STAR qualified products and taking advantage of the power-management features of your computer, you can help reduce the consumption of electricity. Reduced electrical consumption can contribute to potential financial savings, a cleaner environment, and the reduction of greenhouse gas emissions.
For more information about ENERGY STAR, go to: http://www.energystar.gov
Lenovo encourages you to make efficient use of energy an integral part of your day-to-day operations. To help in this endeavor, Lenovo has preset the following power-management features to take effect when your computer has been inactive for a specified length of time:
Power plan: Energy Saver (settings when plugged into ac power)
Turn off the display: After 10 minutes
Put the computer into sleep: After 20 minutes
Advanced power settings:
Turn off hard disks: After 15 minutes
Hibernate: Never
To awaken your computer from sleep mode, press the Fn key on your keyboard. For more information about these settings, see the Windows Help and Support information on your computer.
The Wake on LAN function is enabled when your Lenovo computer is shipped from the factory, and the setting remains valid even when the computer is in sleep mode. If you do not need to have Wake on LAN enabled while your computer is in sleep mode, you can reduce the power consumption and prolong the time in sleep mode, by disabling the setting of Wake on LAN for sleep mode. To disable the setting of Wake on LAN for sleep mode, do the following:
1. Open Control Panel.
2. Click Hardware and Sound Device Manager.
3. In the Device Manager window, expand Network adapters.
4. Right-click your network adapter device, and click Properties.
Copyright Lenovo 2012 119
5. Click the Power Management tab.
6. Clear the Allow this device to wake the computer check box.
7. Click OK.
120 User Guide
Appendix D. Notices
Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any Lenovo intellectual property right may be used instead. However, it is the user's responsibility to evaluate and verify the operation of any other product, program, or service.
Lenovo may have patents or pending patent applications covering subject matter described in this document. The furnishing of this document does not give you any license to these patents. You can send license inquiries, in writing, to:
Lenovo (United States), Inc. 1009 Think Place - Building One Morrisville, NC 27560 U.S.A. Attention: Lenovo Director of Licensing
LENOVO PROVIDES THIS PUBLICATION AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some jurisdictions do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you.
This information could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in new editions of the publication. Lenovo may make improvements and/or changes in the product(s) and/or the program(s) described in this publication at any time without notice.
The products described in this document are not intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. The information contained in this document does not affect or change Lenovo product specifications or warranties. Nothing in this document shall operate as an express or implied license or indemnity under the intellectual property rights of Lenovo or third parties. All information contained in this document was obtained in specific environments and is presented as an illustration. The result obtained in other operating environments may vary.
Lenovo may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you.
Any references in this publication to non-Lenovo Web sites are provided for convenience only and do not in any manner serve as an endorsement of those Web sites. The materials at those Web sites are not part of the materials for this Lenovo product, and use of those Web sites is at your own risk.
Any performance data contained herein was determined in a controlled environment. Therefore, the result obtained in other operating environments may vary significantly. Some measurements may have been made on development-level systems and there is no guarantee that these measurements will be the same on generally available systems. Furthermore, some measurements may have been estimated through extrapolation. Actual results may vary. Users of this document should verify the applicable data for their specific environment.
Copyright Lenovo 2012 121
Trademarks The following terms are trademarks of Lenovo in the United States, other countries, or both:
Lenovo Access Connections Rescue and Recovery ThinkPad ThinkVantage TrackPoint UltraConnect UltraNav
Intel and Intel SpeedStep are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries.
Microsoft, Windows, and BitLocker are trademarks of the Microsoft group of companies.
Other company, product, and service names may be trademarks or service marks of others.
122 User Guide
Appendix E. Restriction of Hazardous Substances Directive (RoHS)
China RoHS
Turkish RoHS The Lenovo product meets the requirements of the Republic of Turkey Directive on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment (EEE).
Ukraine RoHS
Copyright Lenovo 2012 123
Related manuals for Lenovo ThinkPad X1 Carbon Gen 1 Laptop User Guide
Manualsnet FAQs
If you want to find out how the ThinkPad X1 Carbon Gen 1 Lenovo works, you can view and download the Lenovo ThinkPad X1 Carbon Gen 1 Laptop User Guide on the Manualsnet website.
Yes, we have the User Guide for Lenovo ThinkPad X1 Carbon Gen 1 as well as other Lenovo manuals. All you need to do is to use our search bar and find the user manual that you are looking for.
The User Guide should include all the details that are needed to use a Lenovo ThinkPad X1 Carbon Gen 1. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.
The best way to navigate the Lenovo ThinkPad X1 Carbon Gen 1 Laptop User Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.
This Lenovo ThinkPad X1 Carbon Gen 1 Laptop User Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.
You can download Lenovo ThinkPad X1 Carbon Gen 1 Laptop User Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.
To be able to print Lenovo ThinkPad X1 Carbon Gen 1 Laptop User Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Lenovo ThinkPad X1 Carbon Gen 1 Laptop User Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.