Contents

Lenovo IdeaPad Yoga Slim 7 Pro 14IHU5 O Laptop User Guide PDF

1 of 36
1 of 36

Summary of Content for Lenovo IdeaPad Yoga Slim 7 Pro 14IHU5 O Laptop User Guide PDF

User Guide

Yoga Slim 7i Pro (14, 7) and Yoga Slim 7 Pro (14, 7)

Read this first

Before using this documentation and the product it supports, ensure that you read and understand the following:

Generic Safety and Compliance Notices

Safety and Warranty Guide

Setup Guide

First Edition (January 2022)

Copyright Lenovo 2022.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration GSA contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS- 35F-05925.

Contents

About this guide . . . . . . . . . . . . . iii

Chapter 1. Meet your computer . . . . . 1 Front . . . . . . . . . . . . . . . . . . . . 1 Base . . . . . . . . . . . . . . . . . . . . 3 Left . . . . . . . . . . . . . . . . . . . . 4 Right . . . . . . . . . . . . . . . . . . . . 5 Bottom . . . . . . . . . . . . . . . . . . . 6 Features and specifications . . . . . . . . . . . 7

Statement on USB transfer rate . . . . . . . . 8 Operating environment . . . . . . . . . . . 9 Laser safety for the ToF sensor . . . . . . . . 9

Chapter 2. Get started with your computer . . . . . . . . . . . . . . . . 11 Work with Windows . . . . . . . . . . . . . 11

Windows help information . . . . . . . . . 12 Lenovo Vantage and Lenovo PC Manager . . . . 12 The Novo Button menu . . . . . . . . . . . . 12

Open the Novo Button menu . . . . . . . . 12 Interact with your computer . . . . . . . . . . 13

Keyboard hotkeys . . . . . . . . . . . . 13 Multi-touch gestures for touch-enabled screens . . . . . . . . . . . . . . . . 13

Chapter 3. Explore your computer . . 17 Intelligent features . . . . . . . . . . . . . . 17

Customize intelligent features in Lenovo Vantage . . . . . . . . . . . . . . . . 17 Zero touch . . . . . . . . . . . . . . . 17 Enable or disable Flip to Boot . . . . . . . 18 Smart noise cancellation . . . . . . . . . 18

Manage power . . . . . . . . . . . . . . . 18

Check the battery status . . . . . . . . . 18 Charge the battery . . . . . . . . . . . . 18 Set power button behavior. . . . . . . . . 18 A power plan . . . . . . . . . . . . . . 19 Set performance mode . . . . . . . . . . 19

Change settings in UEFI/BIOS setup utility . . . . 19 What is UEFI/BIOS setup utility . . . . . . . 19 Open the UEFI/BIOS setup utility . . . . . . 19 Select boot devices . . . . . . . . . . . 19 Change hotkey mode . . . . . . . . . . . 20 Enable or disable always-on . . . . . . . . 20

Set passwords in UEFI/BIOS setup utility . . . . . 20 Password types . . . . . . . . . . . . . 20 Set administrator password . . . . . . . . 21 Change or remove administrator password . . 21 Set user password . . . . . . . . . . . . 21 Enable power-on password . . . . . . . . 22 Set hard disk password . . . . . . . . . . 22 Change or remove hard disk password . . . . 22

Chapter 4. Help and support . . . . . 23 Frequently asked questions . . . . . . . . . . 23 Self-help resources . . . . . . . . . . . . . 23 What is a CRU? . . . . . . . . . . . . . . . 24 CRUs for your product model . . . . . . . . . 25 Call Lenovo . . . . . . . . . . . . . . . . 26

Before you contact Lenovo . . . . . . . . 26 Lenovo Customer Support Center . . . . . . 26

Purchase additional services. . . . . . . . . . 27

Appendix A. Notices and trademarks. . . . . . . . . . . . . . . 29

Copyright Lenovo 2022 i

ii User Guide

About this guide

This guide applies to Lenovo product model(s) listed below. Illustrations in this guide may look slightly different from your product model.

Model name Machine type (MT)

Yoga Slim 7 Pro 14IAP7 82SV

Yoga Slim 7 Pro 14IAH7 82UT

Yoga Slim 7 Pro 14ARH7 82UU

For further compliance information, refer to the Generic Safety and Compliance Notices at https:// pcsupport.lenovo.com/docs/generic_notices.

This guide may contain information about accessories, features, and software that are not available on all models.

This guide contains instructions that are based on the Windows operating system. These instructions are not applicable if you install and use other operating systems.

Microsoft makes periodic feature changes to the Windows operating system through Windows Update. As a result, the operating system related instructions may become outdated. Refer to Microsoft resources for the latest information.

The content of the guide is subject to change without notice. To obtain the latest version, go to https:// support.lenovo.com.

Copyright Lenovo 2022 iii

iv User Guide

Chapter 1. Meet your computer

Front

1. Microphones Capture or record sound and voice.

2. Ambient light sensor (ALS) Detect the ambient lighting and adjust the brightness of the screen and keyboard automatically. Note: To turn off the automatic brightness adjustment, type display settings in the Windows search box and then press Enter.

3. Infrared LED Emit infrared light for face authentication.

4. Camera Capture still and moving images for taking photos, recording videos, and video chatting.

Capture your face images for face authentication.

Note: Use Windows Hello to enroll your face for face authentication.

5. Camera light If the light is on, the camera is in use.

6. Time of flight (ToF) sensor Detect human presence in front of the computer for facilitating zero touch and other convenient features. See Laser safety for the ToF sensor on page 9.

Copyright Lenovo 2022 1

7. Screen Display text, graphics, and videos. Selected models support multi- touch function.

8. Wireless antennas Send and receive radio waves for the built-in wireless LAN (local area network) and Bluetooth module. Notes:

The antennas are not visible from the outside of the computer.

If the location of the antennas is close to the users body (< 20 cm), you can find the Specific Absorption Rate (SAR) values in the Setup Guide that comes with your computer.

2 User Guide

Base

1. Keyboard Enter characters and interact with programs. Note: The keyboard also includes hotkeys and function keys for changing settings and performing tasks quickly.

2. Touchpad Perform finger touch and all the functions of a traditional mouse. Note: The touchpad also supports multi-touch function.

Chapter 1. Meet your computer 3

Left

1. Charging light Indicate the power and battery status of the computer.

Solid white: connected to ac power; battery capacity 91%100%.

Solid amber: connected to ac power; battery capacity 1%90%.

Off: not connected to ac power.

2. USB-C connector (Thunderbolt 4 enabled) *

Connect to an external display, storage, or data devices. Note: An appropriate adapter may be needed for connecting to external devices.

3. USB-C connector ** Connect to an external display, storage, or data devices. Note: An appropriate adapter may be needed for connecting to external devices.

* for Yoga Slim 7 Pro 14IAP7 and Yoga Slim 7 Pro 14IAH7 only

** for Yoga Slim 7 Pro 14ARH7 only

4 User Guide

Right

1. Combo audio jack Connect headphones or headsets with a 3.5 mm (0.14 inch), 4-pole plug. Note: This jack does not support standalone external microphones. If you use headsets, choose one with a single plug.

2. USB (3.2 Gen 1) Type-A connector (always-on)

The always-on connector can charge external devices when the computer is turned off, in sleep or hibernation mode. The always-on function can be turned on or off in the UEFI/BIOS setup utility. Note: If Lenovo Vantage is pre-installed on your computer, you can also set always-on function from within that software.

3. Power button Press the button to turn on the computer or put the computer into sleep mode. Note: You can turn on the computer by flipping open the LCD screen if Flip to Boot is enabled.

4. Power light Indicate the power and battery status of the computer.

On: the computer is turned on.

Off: the computer is turned off or in hibernation mode.

Blinking: the computer is in sleep mode.

Chapter 1. Meet your computer 5

Bottom

1. Novo button hole Press the Novo button to open the Novo Button menu. From the menu, you can choose to open the UEFI/BIOS setup utility, the Boot menu, or the Windows startup options screen.

2. Speakers Produce sound.

6 User Guide

Features and specifications Dimensions

Width: 312.4 mm (12.30 inches)

Depth: 221.4 mm (8.72 inches)

Thickness:

LCD version

Thinnest: 14.6 mm (0.57 inches)

Thickest: 16.9 mm (0.67 inches)

OLED version

Thinnest: 14.9 mm (0.59 inches)

Thickest: 17.9 mm (0.70 inches)

ac power adapter Input: 100 V ac240 V ac, 50 Hz60 Hz

Power:

65 W

100 W

Battery pack Capacity: 61 Wh

Note: The battery capacity is the typical or average capacity as measured in a specific test environment. Capacities measured in other environments may differ but are no lower than the rated capacity (see product label).

Microprocessor To view the microprocessor information of your computer, type system information in the Windows search box and then press Enter.

Memory Type: LPDDR5

Number of physical slots: 0

Storage device Type: solid-state drive

Form factor: M.2

Bus: PCI Express

Screen Size: 355.6 mm (14 inches)

Display resolution

2880 1800 pixels

2240 1400 pixels

Keyboard Function keys

Hotkeys

Keyboard backlight

Chapter 1. Meet your computer 7

Connectors and slots Combo audio jack

USB Type-A connector

Support data transfer rates up to 5 Gbps for USB 3.2 Gen 1

Provide power output up to 5 V and 0.9 A

USB-C connector (Thunderbolt 4 enabled) 2 *

Charge your computer

Support data transfer rates up to 40 Gbps for Thunderbolt 4

Support data transfer rates up to 10 Gbps for USB 3.2 Gen 2

Compatible with USB4

Provide power output up to 5 V and 3 A

Support DisplayPort 1.4 (up to 4096 2160 pixels, 60 Hz)

USB-C connector (USB4 compliant) **

Charge your computer

Support data transfer rates up to 40 Gbps for USB4

Provide power output up to 5 V and 3 A

Support DisplayPort 1.4 (up to 4096 2160 pixels, 60 Hz)

USB-C connector **

Charge your computer

Support data transfer rates up to 10 Gbps for USB 3.2 Gen 2

Provide power output up to 5 V and 3 A

Support DisplayPort 1.4 (up to 4096 2160 pixels, 60 Hz)

Note: If one USB-C connector is already used and is providing the maximum power to the connected bus-powered device, the maximum power output provided by the other USB-C connector is 5 V and 0.9 A.

Security features UEFI/BIOS passwords

Administrator password

User password

Master hard disk password

User hard disk password

Wireless features Bluetooth and Wi-Fi combo adapter

* for Yoga Slim 7 Pro 14IAP7 and Yoga Slim 7 Pro 14IAH7 only

** for Yoga Slim 7 Pro 14ARH7 only

Statement on USB transfer rate Depending on many factors such as the processing capability of the host and peripheral devices, file attributes, and other factors related to system configuration and operating environments, the actual transfer rate using the various USB connectors on this device will vary and will be slower than the data rate listed below for each corresponding device.

8 User Guide

USB device Data rate (Gbit/s)

3.2 Gen 1 5

3.2 Gen 2 10

Operating environment

Maximum altitude (without pressurization)

3048 m (10 000 ft)

Temperature

At altitudes up to 2438 m (8000 ft)

Operating: 5C to 35C (41F to 95F)

Storage: 5C to 43C (41F to 109F)

At altitudes above 2438 m (8000 ft)

Maximum temperature when operating under the unpressurized condition: 31.3C (88F)

Note: When you charge the battery, its temperature must be no lower than 10C (50F).

Relative humidity

Operating: 8% to 95% at wet-bulb temperature 23C (73F)

Storage: 5% to 95% at wet-bulb temperature 27C (81F)

Laser safety for the ToF sensor

This device is classified as a Class 1 laser product per EN/IEC 60825-1:2014. This device complies with FDA performance standards for laser products except for conformance with IEC 60825-1 Ed. 3, as described in Laser Notice No. 56, dated May 8, 2019.

CAUTION: This device contains a laser that could be damaged during repair or disassembly, which could result in hazardous exposure to infrared laser emissions. There are no user serviceable parts with the device. Do not attempt to disassemble or service the device.

Chapter 1. Meet your computer 9

10 User Guide

Chapter 2. Get started with your computer

Work with Windows The following table contains Windows frequently used settings. You can learn the basics and start working with Windows right away.

To configure settings, type the corresponding keywords in the Windows search box and select the best match. Follow the on-screen instructions to customize settings.

Table 1. Basic settings

Functions Descriptions Search by keywords

Control Panel View or change Windows settings, including hardware and software setup and configuration.

Control Panel

Connect to Wi-Fi networks

For models with a wireless LAN module, you can connect your computer to a Wi-Fi network. Click the network icon in the Windows notification area, and then select a network for connection. Note: The wireless LAN module on your computer may support different standards. For some countries or regions, use of 802.11ax may be disabled according to local regulations.

Wi-Fi

Airplane mode Airplane mode is a convenient setting to turn all wireless communications of your computer on and off. You may need to turn it on when boarding an airplane.

Airplane mode

Night light mode Night light is a switch in Windows that you can turn on and off. When it is turned on, your screen shows warmer colors and the amount of emitted blue light is reduced. Enabling night light reduces the chances of developing eye fatigue or eye strain.

Night light

Adjust color temperature

If night light mode is turned on, you can adjust the color temperature of the screen. Note: Selected Lenovo computers are low blue light certified. These computers are tested with night light turned on and color temperature set to the default value of 48.

Night light

Windows Updates

Microsoft periodically releases feature and security updates to the Windows operating system. Updates that are applicable to your Windows version are downloaded automatically when your computer is connected to the Internet. When updates are downloaded, you are prompted to restart the computer to install these updates. You can also manually check if there are available updates for the installed version of Windows. Attention: Only use Windows Update to download and install updates. Updates downloaded from other sources may include security risks.

Windows Updates

Table 2. Optional settings

Functions Descriptions Search by keywords

Set up face recognition

For models with a Windows Hello-compatible infrared camera, you can set up face recognition to sign in with your face.

Sign-in options

Copyright Lenovo 2022 11

Windows help information If the on-screen instructions cannot solve your problem, refer to the following to get the online Windows help information.

Type Get Help or Tips in the Windows search box and then press Enter. When the app opens, type the problem description and select the matched result.

Visit Microsoft support Web site: https://support.microsoft.com. Enter what you are looking for in the search box and get search results.

Lenovo Vantage and Lenovo PC Manager They are both apps developed by Lenovo. Using either of them, you can:

View product information and system status

Manage and change device settings

Check for and perform system update

Note: This feature is only available on Lenovo Vantage. In Lenovo PC Manager, you can check for and perform driver update.

Depending on the country or region in which your computer is purchased, one of the apps may be pre- installed on your computer. To open it, type its name in the Windows Search box and select the matched result. If neither of the apps is pre-installed, you may install one on your own. Lenovo Vantage is available for download free of charge from the Microsoft Store.

Note: App features are subject to change with updates and specific features may not be available on all Lenovo products.

The Novo Button menu The Novo Button menu can be displayed before the operating system starts. From the menu, you can choose to

Open the BIOS/UEFI setup utility

Open the boot device selection menu

Open the Windows startup options screen

Note: From the Windows startup options screen, you can then choose to

Start your computer using a recovery drive

Reset your computer

Open advanced options screen

Open the Novo Button menu For Lenovo computers with a Novo button, you can press the button to open the Novo Button menu.

Step 1. Turn off the computer.

Step 2. Open the LCD screen and press the Novo button.

Note: Alternatively, turn off the computer. Press Fn and the power button to open the Novo Button menu.

12 User Guide

Interact with your computer

Keyboard hotkeys Some keys on the keyboard are printed with icons. These keys are called hotkeys and can be pressed alone or in combination with the Fn key to open certain apps or change certain settings quickly. The functions of the hotkeys are symbolized by the icons printed on them.

Hotkey Function

Mute/Unmute sound.

Decrease/Increase system volume.

Mute/Unmute the microphone.

Increase/Decrease screen brightness.

Switch display devices.

Turn airplane mode on and off.

Open the Windows Settings app.

Lock the screen.

Display thumbnails of all open apps.

Open the Windows Calculator app.

Display an app launcher for quick access to Lenovo apps and services. Note: For some models, you may need to connect to the Internet and complete system update for this function to take effect.

Open the Windows snipping tool.

Turn on/off or adjust the brightness of the keyboard backlight. Note: This hotkey must be used with the Fn key.

Hotkey mode Some hotkeys share keys with function keys (F1 to F12). The hotkey mode is a UEFI/BIOS setting that changes how hotkeys (or function keys) are used.

Hotkey mode setting How to use hotkeys How to use function keys

Disabled Hold down the Fn key and press one of the hotkeys.

Press the function keys directly.

Enabled Press the hotkeys directly. Hold down the Fn key and press one of the function keys.

Note: Hotkeys that do not share keys with function keys are not affected by the hotkey mode setting. They should always be used with the Fn key.

Multi-touch gestures for touch-enabled screens Selected Lenovo computers include a touch-enabled screen. For such a computer, you can use your fingers to interact with the operating system and apps that are gesture aware.

Chapter 2. Get started with your computer 13

Note: Not all gestures are supported by all apps.

Gesture Function

Tap

Selecting an item

Tap twice quickly

Double-clicking an item

Tap and hold

Right-clicking an item

Pinch

Zooming out

Spread

Zooming in

Tap from the left edge

Viewing all open apps

14 User Guide

Gesture Function

Tap and hold

Displaying the Action Center of Windows

Chapter 2. Get started with your computer 15

16 User Guide

Chapter 3. Explore your computer

Intelligent features Some Lenovo computers include a ToF sensor and an IR camera on top of the screen. Using data provided by the ToF sensor and IR camera, the computer is able to behave like a human. It can detect your presence, your movement, and perform operations automatically to protect your privacy, save battery power, or just make your daily use of the computer easier. The following table provides an introduction to some of the intelligent features and where you can set them up.

Table 3. Intelligent features

Your behavior Computer operation Setup app

Leave the computer Pause the ongoing video playback.

(If you do not come back shortly) Automatically lock the screen and put the computer into sleep mode.

Note: Not all applications support automatic video pausing and resuming. In particular, videos played in a Web browser cannot be automatically paused.

Lenovo Vantage or Lenovo Smart Engine

Come back to the computer after leaving it unattended for a while

Automatically wake up the computer and sign you into the system. Note: You must use Windows Hello to set up face recognition before you can be signed in automatically. Face sign-in may fail due to poor domestic lighting or improper setting of the screen opening angle. Improve lighting, adjust the screen opening angle, or use another sign-in option if youre not signed in automatically.

Lenovo Vantage or Lenovo Smart Engine

Use videoconferencing apps Blur the background Lenovo Vantage or Lenovo Smart Engine

Note: Your computer may be pre-installed with either Lenovo Vantage or Lenovo Smart Engine but not both. The above listed features may not be enabled by default. You may need to enable these features in the corresponding setup app.

Customize intelligent features in Lenovo Vantage You can enable or disable and customize many intelligent features in Lenovo Vantage.

Step 1. Open Lenovo Vantage.

Step 2. Select Hardware Settings Smart Settings.

Step 3. Change settings that control the various intelligent features.

Zero touch Zero touch enables you to improve work efficiency by automatically waking up and logging in to your computer, or dimming the display and locking the computer depending on user detection. For selected video

Copyright Lenovo 2022 17

players, this feature will pause any video playing when you leave the computer and resume upon your return. Zero touch can be enabled or disabled in Lenovo Vantage or Lenovo Smart Engine.

Enable or disable Flip to Boot If Flip to Boot is enabled, you can turn on the computer by flipping open the LCD screen.

Step 1. Open Lenovo Vantage.

Step 2. Click Device My Device Settings Power settings Flip to boot to change the setting.

Note: You can also change the setting for Flip to Boot in Lenovo Smart Engine, or open the UEFI/ BIOS setup utility and then select Configuration to change.

Smart noise cancellation It's a setting function for Lenovo computer microphone array and speakers input and output environment, including noise cancellation, microphone listening direction setting, speaker noise cancellation and other functions.

Manage power Use the information in this section to achieve the best balance between performance and power efficiency.

Check the battery status The battery status icon or is in the Windows notification area. You can check the battery status, view the current power plan, and access battery settings quickly.

Click the battery status icon to display the percentage of battery power remaining and change the power mode. A warning message is displayed when the battery is low.

Charge the battery When the remaining battery power is low, charge your battery by connecting your computer to ac power.

The battery is fully charged in about two to four hours. The actual charging time depends on the battery capacity, the physical environment, and whether you are using the computer.

Battery charging is also affected by its temperature. The recommended temperature range for charging the battery is between 10C (50F) and 35C (95F).

Note:

To maximize the life of the battery, once the battery is fully charged, it must discharge to 94% or lower before it will be allowed to recharge again.

To extend your batterys lifespan, the battery may optimize its full charge capacity based on your usage. After prolonged periods of limited use, full battery capacity may not be available until you discharge to as low as 20% and recharge completely. For more information, refer to the power section of Lenovo Vantage.

Set power button behavior By default, pressing the power button puts the computer to sleep mode. However, you can change the power button behavior in Windows Control Panel.

18 User Guide

Step 1. Type Control Panel in the Windows search box and then press Enter. Open the control panel and view by large or small icons.

Step 2. Select the power options and then click choose what the power button does.

A power plan A power plan is a collection of power-saving settings made available by an operating system. With a power plan, you can set idle time-outs for different hardware components to enter a low-power state. The default power plan and some of its idle time-out settings are listed below for computer models pre-installed with Windows.

The listed settings are active when the computer is connected to an electrical outlet. If your computer include a built-in battery pack, a different collection of time-out settings is set to take effect when the computer is operating on battery power.

Default power plan: Balanced

Turn off the display: after 10 minutes

Put the computer to sleep: after 10 minutes

Note: To wake the computer from the sleep state, press the power button or any key on the keyboard.

Change or customize a power plan This operation is applicable to computers with pre-installed Windows.

Step 1. Type power plan in the Windows search box and then press Enter.

Step 2. Customize a power plan of your preference.

Set performance mode Your computer can work in different performance modes. The performance and power consumption of the computer vary in different performance modes. Press Fn + Q to cycle through different performance modes.

Change settings in UEFI/BIOS setup utility This section introduces what is UEFI/BIOS and the operations you can perform in its setup utility.

What is UEFI/BIOS setup utility UEFI/BIOS is the first program that runs when a computer starts. UEFI/BIOS initializes hardware components and loads the operating system and other programs. Your computer may include a setup program (setup utility) with which you can change certain UEFI/BIOS settings.

Open the UEFI/BIOS setup utility Step 1. Turn on or restart the computer.

Step 2. When the Lenovo logo appears on the screen, press F2 repeatedly.

Note: For computers with hotkey mode enabled, press Fn + F2.

Select boot devices Normally, the computer starts to a boot manager loaded from the secondary storage device of the computer. Occasionally, you may need to start the computer to a program or boot manager loaded from another device

Chapter 3. Explore your computer 19

or a network location. After the system firmware initializes all devices, you can press an interruption key to display the boot menu and select a desired boot device.

Step 1. Turn on or restart the computer.

Step 2. Press F12.

Step 3. From the boot device menu, select a boot device to start the computer.

You can make a permanent change on boot devices in the UEFI/BIOS setup utility. Select the Boot menu; in the EFI section, select the desired boot device and move it to the top of the device list. Save changes and exit the setup utility for the change to take effect.

Change hotkey mode Step 1. Open the UEFI/BIOS setup utility.

Step 2. Select Configuration Hotkey Mode and press Enter.

Step 3. Change the setting to Disabled or Enabled.

Step 4. Select Exit Exit Saving Changes.

Enable or disable always-on For some Lenovo computers with always-on connectors, the always-on function can be enabled or disabled in the UEFI/BIOS setup utility.

Step 1. Open the UEFI/BIOS setup utility.

Step 2. Select Configuration Always On USB and press Enter.

Step 3. Change the setting to Disabled or Enabled.

Step 4. Select Exit Exit Saving Changes.

Set passwords in UEFI/BIOS setup utility This section introduces the types of passwords that you can set in the UEFI (Unified Extensible Firmware Interface) or BIOS (Basic Input/Output System) setup utility.

Password types You can set various types of passwords in the UEFI/BIOS setup utility.

Password type Pre-requisite Usage

Administrator password No You must enter it to start the setup utility.

User password The administrator password must be set.

You can use the user password to start the setup utility.

Master hard disk password No You must enter it to start the operating system.

User hard disk password The master hard disk password must be set.

You can use the user hard disk password to start the operating system.

Notes:

All passwords set in the setup utility consist of alphanumeric characters only.

20 User Guide

If you start the setup utility using the user password, you can only change a few settings.

Set administrator password You set the administrator password to prevent unauthorized access to the UEFI/BIOS setup utility.

Attention: If you forget the administrator password, a Lenovo authorized service personnel cannot reset your password. You must take your computer to a Lenovo authorized service personnel to have the system board replaced. Proof of purchase is required and a fee will be charged for parts and service.

Step 1. Open the UEFI/BIOS setup utility.

Step 2. Select Security Set Administrator Password and press Enter.

Step 3. Enter a password string that contains only letters and numbers and then press Enter

Step 4. Enter the password again and press Enter.

Step 5. Select Exit Exit Saving Changes.

Next time you start the computer, you must enter the administrator password to open the setup utility. If Power on Password is enabled, you must enter the administrator password or the user password to start the computer.

Change or remove administrator password Only the administrator can change or remove the administrator password.

Step 1. Open the UEFI/BIOS setup utility using the administrator password.

Step 2. Select Security Set Administrator Password and press Enter.

Step 3. Enter the current password.

Step 4. In the Enter New Password text box, enter the new password.

Step 5. In the Confirm New Password text box, enter the new password again.

Note: If you want to remove the password, press Enter in both text boxes without entering any character.

Step 6. Select Exit Exit Saving Changes.

If you remove the administrator password, the user password is also removed.

Set user password You must set the administrator password before you can set the user password.

The administrator of the setup utility might need to set a user password for use by others.

Step 1. Open the UEFI/BIOS setup utility using the administrator password.

Step 2. Select Security Set User Password and press Enter.

Step 3. Enter a password string that contains only letters and numbers and then press Enter. The user password must be different from the administrator password.

Step 4. Enter the password again and press Enter.

Step 5. Select Exit Exit Saving Changes.

Chapter 3. Explore your computer 21

Enable power-on password If the administrator password has been set, you can enable power-on password to enforce greater security.

Step 1. Open the UEFI/BIOS setup utility.

Step 2. Select Security Power on Password and press Enter.

Note: The administrator password must be set in advance.

Step 3. Change the setting to Enabled.

Step 4. Select Exit Exit Saving Changes.

If power-on password is enabled, a prompt appears on the screen every time you turn on the computer. You must enter the administrator or user password to start the computer.

Set hard disk password You can set a hard disk password in the setup utility to prevent unauthorized access to your data.

Attention: Be extremely careful when setting a hard disk password. If you forget the hard disk password, a Lenovo authorized service personnel cannot reset your password or recover data from the hard disk. You must take your computer to a Lenovo authorized service personnel to have the hard disk drive replaced. Proof of purchase is required and a fee will be charged for parts and service.

Step 1. Open the UEFI/BIOS setup utility.

Step 2. Select Security Set Hard Disk Password and press Enter.

Note: If you start the setup utility using the user password, you cannot set hard disk password.

Step 3. Follow on-screen instructions to set both master and user passwords.

Note: The master and user hard disk passwords must be set at the same time.

Step 4. Select Exit Exit Saving Changes.

If the hard disk password is set, you must provide the correct password to start the operating system.

Change or remove hard disk password Step 1. Open the UEFI/BIOS setup utility.

Step 2. Select Security.

Step 3. Change or remove the hard disk password.

To change or remove master password, select Change Master Password and press Enter.

Note: If you remove the master hard disk password, the user hard disk password is also removed.

To change user password, select Change User Password and press Enter.

Note: The user hard disk password cannot be removed separately.

Step 4. Select Exit Exit Saving Changes.

22 User Guide

Chapter 4. Help and support

Frequently asked questions How do I partition my storage drive?

Refer to https://support.lenovo.com/solutions/ht503851

What should I do if my computer stops responding.

Press and hold the power button until the computer turns off. Then restart the computer.

What should I do if I spill liquid on the computer?

1. Carefully unplug the ac power adapter and turn off the computer immediately. The more quickly you stop the current from passing through the computer the more likely you will reduce damage from short circuits.

Attention: Although you might lose some data or work by turning off the computer immediately, leaving the computer on might make your computer unusable.

2. Wait until you are certain that all the liquid is dry before turning on your computer.

CAUTION: Do not try to drain out the liquid by turning over the computer. If your computer has keyboard drainage holes on the bottom, the liquid will be drained out through the holes.

Where can I get the latest device drivers and UEFI/BIOS?

Lenovo Vantage or Lenovo PC Manager

Lenovo Support Web site at https://support.lenovo.com

Self-help resources Use the following self-help resources to learn more about the computer and troubleshoot problems.

Resources How to access?

Troubleshooting and frequently asked questions https://www.lenovo.com/tips

https://forums.lenovo.com

Accessibility information https://www.lenovo.com/accessibility

Reset or restore Windows Use Lenovo recovery options.

1. Go to https://support.lenovo.com/ HowToCreateLenovoRecovery.

2. Follow the on-screen instructions.

Use Windows recovery options.

1. Go to https://pcsupport.lenovo.com.

2. Detect your computer or manually select your computer model.

3. Click Diagnostics Operating System Diagnostics and then follow the on-screen instructions.

Copyright Lenovo 2022 23

Resources How to access?

Use Lenovo Vantage or Lenovo PC Manager to:

Download and install the latest drivers and firmware.

Configure hardware settings

Diagnose computer hardware problems.

Check the computer warranty status.

Use Windows Search.

Product documentation:

Generic Safety and Compliance Notices

Safety and Warranty Guide

Setup Guide

This User Guide

Regulatory Notice

1. Go to https://support.lenovo.com.

2. Detect your computer or select computer model manually.

3. Select Documentation and filter out the documentation you want.

Lenovo Support Web site with the latest support information of the following:

Drivers and software

Diagnostic solutions

Product and service warranty

Product and parts details

Knowledge base and frequently asked questions

Visit https://support.lenovo.com

Windows help information

Use Get Help or Tips.

Use Windows Search or the Cortana personal assistant.

Microsoft support Web site: https:// support.microsoft.com

What is a CRU? Customer replaceable units (CRUs) are parts that can be upgraded or replaced by the customer. A Lenovo computer may contain the following types of CRUs:

Self-service CRU Parts that can be installed or replaced easily by customer themselves or by trained service technicians at an additional cost.

Optional-service CRU Parts that can be installed or replaced by customers with a greater skill level. Trained service technicians can also provide service to install or replace the parts under the type of warranty designated for the customers machine.

If you intend to install a CRU, Lenovo will ship the CRU to you. You might be required to return the defective part that is replaced by the CRU. When return is required: (1) return instructions, a prepaid shipping label, and a container will be included with the replacement CRU; and (2) you might be charged for the replacement CRU if Lenovo does not receive the defective CRU within thirty (30) days of your receipt of the replacement CRU. For full details, see the Lenovo Limited Warranty at https://www.lenovo.com/warranty/llw_ 02.

24 User Guide

CRUs for your product model The table below lists the CRUs and CRU types that are defined for your product model.

Part Self-service CRU Optional-service CRU

Power cord X

ac power adapter X

Notes:

CRU replacement instruction is provided in one or more of the following publications and are available from Lenovo at any time upon your request.

the product User Guide

the printed publications that came with the product

Replacement of any parts not listed above, including the built-in rechargeable battery, must be done by a Lenovo-authorized repair facility or technician. Go to https://support.lenovo.com/partnerlocation for more information.

Chapter 4. Help and support 25

Call Lenovo If you have tried to correct the problem yourself and still need help, you can call Lenovo Customer Support Center.

Before you contact Lenovo Record product information and problem details before you contact Lenovo.

Product information Problem symptoms and details

Product name

Machine type and serial number

What is the problem? Is it continuous or intermittent?

Any error message or error code?

What operating system are you using? Which version?

Which software applications were running at the time of the problem?

Can the problem be reproduced? If so, how?

Note: The product name and serial number can usually be found on the bottom of the computer, either printed on a label or etched on the cover.

Lenovo Customer Support Center During the warranty period, you can call Lenovo Customer Support Center for help.

Telephone numbers

For a list of the Lenovo Support phone numbers for your country or region, go to https:// pcsupport.lenovo.com/supportphonelist.

Note: Phone numbers are subject to change without notice. If the number for your country or region is not provided, contact your Lenovo reseller or Lenovo marketing representative.

Services available during the warranty period

Problem determination - Trained personnel are available to assist you with determining if you have a hardware problem and deciding what action is necessary to fix the problem.

Lenovo hardware repair - If the problem is determined to be caused by Lenovo hardware under warranty, trained service personnel are available to provide the applicable level of service.

Engineering change management - Occasionally, there might be changes that are required after a product has been sold. Lenovo or your reseller, if authorized by Lenovo, will make selected Engineering Changes (ECs) that apply to your hardware available.

Services not covered

Replacement or use of parts not manufactured for or by Lenovo or nonwarranted parts Identification of software problem sources Configuration of UEFI/BIOS as part of an installation or upgrade Changes, modifications, or upgrades to device drivers Installation and maintenance of network operating systems (NOS) Installation and maintenance of programs

For the terms and conditions of the Lenovo Limited Warranty that apply to your Lenovo hardware product, see Warranty information in the Safety and Warranty Guide that comes with your computer.

26 User Guide

Purchase additional services During and after the warranty period, you can purchase additional services from Lenovo at https:// pcsupport.lenovo.com/warrantyupgrade.

Service availability and service name might vary by country or region.

Chapter 4. Help and support 27

28 User Guide

Appendix A. Notices and trademarks

Notices

Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any Lenovo intellectual property right may be used instead. However, it is the user's responsibility to evaluate and verify the operation of any other product, program, or service.

Lenovo may have patents or pending patent programs covering subject matter described in this document. The furnishing of this document does not give you any license to these patents. You can send license inquiries, in writing, to: Lenovo (United States), Inc. 8001 Development Drive Morrisville, NC 27560 U.S.A. Attention: Lenovo Director of Licensing

LENOVO PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some jurisdictions do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you.

Changes are made periodically to the information herein; these changes will be incorporated in new editions of the publication. To provide better service, Lenovo reserves the right to improve and/or modify the products and software programs described in the manuals included with your computer, and the content of the manual, at any time without additional notice.

The software interface and function and hardware configuration described in the manuals included with your computer might not match exactly the actual configuration of the computer that you purchase. For the configuration of the product, refer to the related contract (if any) or product packing list, or consult the distributor for the product sales. Lenovo may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you.

The products described in this document are not intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. The information contained in this document does not affect or change Lenovo product specifications or warranties. Nothing in this document shall operate as an express or implied license or indemnity under the intellectual property rights of Lenovo or third parties. All information contained in this document was obtained in specific environments and is presented as an illustration. The result obtained in other operating environments may vary.

Lenovo may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you.

Any references in this publication to non-Lenovo Web sites are provided for convenience only and do not in any manner serve as an endorsement of those Web sites. The materials at those Web sites are not part of the materials for this Lenovo product, and use of those Web sites is at your own risk.

Copyright Lenovo 2022 29

Any performance data contained herein was determined in a controlled environment. Therefore, the result obtained in other operating environments may vary significantly. Some measurements may have been made on development-level systems and there is no guarantee that these measurements will be the same on generally available systems. Furthermore, some measurements may have been estimated through extrapolation. Actual results may vary. Users of this document should verify the applicable data for their specific environment.

This document is copyrighted by Lenovo and is not covered by any open source license, including any Linux agreement(s) which may accompany software included with this product. Lenovo may update this document at any time without notice.

For the latest information or any questions or comments, contact or visit the Lenovo Web site:

https://support.lenovo.com

Trademarks

Lenovo, the Lenovo logo, and Yoga are trademarks of Lenovo. Thunderbolt is a trademark of Intel Corporation or its subsidiaries. Microsoft, Windows, and Windows Hello are trademarks of the Microsoft group of companies. DisplayPort is a trademark of the Video Electronics Standards Association. Wi-Fi is a reg

Manualsnet FAQs

If you want to find out how the IdeaPad Yoga Slim 7 Pro 14IHU5 O Lenovo works, you can view and download the Lenovo IdeaPad Yoga Slim 7 Pro 14IHU5 O Laptop User Guide on the Manualsnet website.

Yes, we have the User Guide for Lenovo IdeaPad Yoga Slim 7 Pro 14IHU5 O as well as other Lenovo manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User Guide should include all the details that are needed to use a Lenovo IdeaPad Yoga Slim 7 Pro 14IHU5 O. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Lenovo IdeaPad Yoga Slim 7 Pro 14IHU5 O Laptop User Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Lenovo IdeaPad Yoga Slim 7 Pro 14IHU5 O Laptop User Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Lenovo IdeaPad Yoga Slim 7 Pro 14IHU5 O Laptop User Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Lenovo IdeaPad Yoga Slim 7 Pro 14IHU5 O Laptop User Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Lenovo IdeaPad Yoga Slim 7 Pro 14IHU5 O Laptop User Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.