Contents

Lenovo IdeaPad 320E-17IKB Laptop User Guide PDF

1 of 36
1 of 36

Summary of Content for Lenovo IdeaPad 320E-17IKB Laptop User Guide PDF

Lenovo ideapad 320 ideapad 320-17IKB/ideapad 320H-17IKB/ ideapad 320L-17IKB/ideapad 320R-17IKB/ ideapad 320E-17IKB/ideapad 320-17ISK/ ideapad 320H-17ISK/ideapad 320L-17ISK/ ideapad 320R-17ISK/ideapad 320E-17ISK

User Guide

Read the safety notices and important tips in the included manuals before using your computer.

lmn Read the safety notices and important tips in the included manuals before using your computer.

Notes Before using the product, be sure to read Lenovo Safety and General Information

Guide first. The latest electronic compliance and environmental information are available

from the Lenovo compliance information Web sites. - To view compliance information go to:

http://www.lenovo.com/compliance - To download environmental information go to:

http://www.lenovo.com/ecodeclaration Some instructions in this guide may assume that you are using Windows 10.

If you are using another Windows operating system, some operations may be slightly different. If you are using other operating systems, some operations may not apply to you.

The features described in this guide are common to most models. Some features may not be available on your computer or your computer may include features that are not described in this user guide.

The illustrations used in this manual are for Lenovo ideapad 320-17IKB unless otherwise stated.

The illustrations in this manual may differ from the actual product. The screenshots of operating system are for reference only. Please refer to the actual product.

Regulatory Notice For details, refer to Guides & Manuals at http://support.lenovo.com.

First Edition (February 2017) Copyright Lenovo 2017.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration GSA contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925.

Contents

Chapter 1. Getting to know your computer ......................................... 1 Top view.......................................................................................................................1 Left-side view ..............................................................................................................6 Right-side view..........................................................................................................11 Bottom view ...............................................................................................................12

Chapter 2. Starting to use Windows 10 ............................................. 13 Configuring the operating system for the first time ............................................13 Operating system interfaces ....................................................................................13 Putting the computer to sleep or shutting it down ..............................................16 Connecting to a wireless network ..........................................................................18 Get help from Windows...........................................................................................19

Chapter 3. Recovery system ............................................................... 20 Push-button reset ......................................................................................................20

Chapter 4. Troubleshooting ................................................................22 Frequently asked questions .....................................................................................22 Troubleshooting ........................................................................................................24

Appendix A. CRU instructions ............................................................ 27 Replacing the optical drive ......................................................................................28

Trademarks .......................................................................................... 31

i

Chapter 1. Getting to know your computer

Top view - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Attention: Do not open the display panel beyond 170 degrees. When closing the display panel, be

careful not to leave pens or any other objects in between the display panel and the keyboard. Otherwise, the display panel may be damaged.

Note: The dashed areas indicate parts that are not visible externally.

g

f

d

e

ab

c

h

i

1

Chapter 1. Getting to know your computer

a Integrated camera

Use the camera for video communication.

b Built-in microphone

Capture sound which can be used for video conferencing, voice narration, or audio recording.

c Wireless LAN antennas

Connect to a wireless LAN adapter to send and receive wireless radio signals.

d Computer display The LCD display with LED backlight provides brilliant visual output.

e Ventilation slots Dissipate internal heat.

Note: Make sure that none of the ventilation slots are blocked, or else overheating of the computer may occur.

f Touch pad The touch pad functions as a conventional mouse.

Touch pad: To move the pointer on the screen, slide your fingertip over the pad in the direction in which you want the pointer to move. Touch pad buttons: The functions of the left/right side correspond to those of the left/right mouse button on a conventional mouse.

Note: You can enable/disable the touch pad by pressing F6 ( ).

g Power Key Press this key to turn on/off the computer. By default, when the computer is on, press and hold this key for more than 1 second, the computer will enter sleep mode, press and hold it for more than 5 seconds, the computer will be turned off.

h Numeric keypad For details, see Using the keyboard on page 3.

i Fingerprint reader (on select models)

Registers fingerprints that can be used as passwords to secure your computer.

2

Chapter 1. Getting to know your computer

Using the keyboard

Your computer has number keys and function keys and may also have a numeric keypad incorporated into its standard keyboard.

Numeric keypad

The keyboard has a separate numeric keypad. To enable or disable the numeric keypad, press the Num Lock key.

3

Chapter 1. Getting to know your computer

Using the keyboard

Hotkeys

You can access certain system settings quickly by pressing the appropriate hotkeys.

: Mutes/unmutes the sound. : Enables/disables airplane mode.

: Decreases the volume level. : Enables/disables camera.

: Increases the volume level. : Locks/unlocks the LCD screen.

: Enables/disables microphone. :

Enables the external projector or dangles the external display.

: Refreshes page. : Decreases display brightness.

: Enables/disables the touch pad. :

Increases display brightness.

Note: If you changed the Hotkey Mode from Enabled to Disabled in the BIOS setup utility, you will need to press the Fn key in combination with the appropriate hotkey.

4

Chapter 1. Getting to know your computer

Function key combinations

Through the use of the function keys, you can change operational features instantly. To use this function, press and hold Fn a; then press one of the function keys b.

The following describes the features of each function key. Fn + B: Activate the break function.

Fn + P: Activate the pause function.

Fn + C: Enable/Disable the scroll lock.

Fn + Y: Activate the system request.

Fn + S + V: Set the battery Ship Mode.

a

b

5

Chapter 1. Getting to know your computer

Left-side view - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

a AC power adapter jack

Connects to the AC power adapter.

b Battery/Charging status indicator

AC power adapter status

Indicator status Meaning

Disconnected

Off The computer is in sleep mode or turned off; The battery has more than 20% charge.

Solid amber The battery has between 5% and 20% charge.

Fast blinking amber The battery has between 1% and 5% charge.

Connected

Slow blinking amber The battery is being charged. When battery charge reaches 20%, the blinking color changes to white.

Slow blinking white The battery has between 20% and 80% charge and is still charging. When the battery reaches 80% charge the light will stop blinking.

Solid white The battery has more than 80% charge, charging will continue until the battery is fully charged.

c RJ-45 port Connects the computer to an Ethernet network.

d HDMI port Connects to devices with HDMI input such as a TV or a display.

ab c d e f g h ij

6

Chapter 1. Getting to know your computer

e USB 3.0 port Connects to USB devices.

Note: For details, see Connecting USB devices on page 9.

f Combo audio jack

Connects to headsets.

Notes: The combo audio jack does not support conventional microphones. The recording function may not be supported if third-party headphones or headsets are

connected, due to different industry standards.

g Type-C port Type-C port support: USB 3.1 Gen1

h Memory card slot Insert memory cards (not supplied) here.

Note: For details, see Using memory cards (not supplied) on page 10.

i Novo button When the computer is off, press this button to start the System Recovery or the BIOS setup utility, or to enter the boot menu.

j Power status indicator

Indicator Indicator status Meaning

Power status indicator

On (solid white) The computer is powered on. Blinking The computer is in sleep mode. Off The computer is powered off.

7

Chapter 1. Getting to know your computer

Connecting network cables

To insert a network cable, do the following: 1 Hold one connector of the network cable to press the RJ-45 cover down

gently a. 2 Insert the connector into the RJ-45 port b.

Software configuration

Consult your Internet Service Provider (ISP) for details on how to configure your computer.

a

b

8

Chapter 1. Getting to know your computer

Connecting USB devices

You can connect a USB device to your computer by inserting its USB plug (Type A) into the USB port on your computer.

The first time you plug a USB device into a particular USB port on your computer, Windows automatically installs a driver for that device. After the driver has been installed, you can disconnect and reconnect the device without performing any additional steps.

Before disconnecting a USB storage device, make sure your computer has finished transferring data to that device. Click the Safely Remove Hardware and Eject Media icon in the Windows notification area to remove the device before disconnecting.

Note: Typically, Windows detects a new device after it has been connected, and then installs the driver automatically. However, some devices may require you to install the driver before connecting. Check the documentation provided by the devices manufacturer before connecting the device.

Note: If your USB device uses a power cord, connect the device to a power source before connecting it. Otherwise, the device may not be recognized.

9

Chapter 1. Getting to know your computer

Using memory cards (not supplied)

Your computer supports the following types of memory cards: Secure Digital (SD) card Secure Digital High Capacity (SDHC) card SD eXtended Capacity (SDXC) card MultiMediaCard (MMC)

Inserting a memory card Insert the memory card until it touches the bottom of the slot. Removing a memory card Gently pull the memory card out of the memory card slot.

Notes: Insert only one card in the slot at a time. This card reader does not support SDIO devices (e.g., SDIO Bluetooth, etc.).

Note: Before removing the memory card, disable it by using the Windows safely remove hardware and eject media utility to avoid data corruption.

10

Chapter 1. Getting to know your computer

Right-side view - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

a Optical disc drive Reads/Burns optical discs.

Note: Some models are supplied with a dummy optical disc drive.

b Kensington Mini Security slot

For attaching a Kensington MiniSaverTM Mobile (or compatible) lock. Attach a security lock (not supplied) here to help protect your computer from theft and unauthorized use. You can attach a security lock to your computer to help prevent it from being removed without your permission. For details on installing the security lock, please refer to the instructions shipped with the security lock that you have purchased.

Notes: Lock is not supplied. When purchasing a lock, choose one that utilizes the CleatTM

locking mechanism and verify its compatibility with the slot before purchase. A lock utilizing the T-BarTM locking mechanism is not compatible with the Kensington Mini Security slot.

Before purchasing any security product, verify that it is compatible with this type of security keyhole.

You are responsible for evaluating, selecting, and implementing the locking devices and security features. Lenovo offers no comment, judgment, or warranty regarding the function, quality, or performance of locking devices and security features.

ba

11

Chapter 1. Getting to know your computer

Bottom view - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

a Ventilation slots Dissipate internal heat.

Note: Make sure that none of the ventilation slots are blocked, or else overheating of the computer may occur.

b Speakers Provide audio output.

a

bb

12

Chapter 2. Starting to use Windows 10

Configuring the operating system for the first time - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

You may need to configure the operating system when it is first used. The configuration process may include the procedures below: Accepting the end user license agreement Configuring the Internet connection Registering the operating system Creating a user account

Operating system interfaces - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

The return of the Start menu

If you click the Start button in the lower-left corner, the Start menu is displayed. To open the start menu, do one of the following: Select the Start button in the lower-left corner, the Start menu is displayed. Press the Windows key on the keyboard.

13

Chapter 2. Starting to use Windows 10

The power button is on the Start menu, select it you can choose to shut down or restart the computer, or put the computer into sleep mode.

Through the Start menu, you can locate all the installed apps or view the frequently used apps.

The ACTION CENTER

Select the ACTION CENTER icon on the taskbar and the ACTION CENTER is displayed.

From the ACTION CENTER, you can examine important notifications from Windows and your apps. Moreover, you can change common settings quickly.

14

Chapter 2. Starting to use Windows 10

Task View in taskbar

In Windows 10, you can add a new desktop and switch between different desktops. To add a new desktop, do the following:

Select the Task View icon in the taskbar area.

Select New desktop.

To switch between desktops, select the Task View icon , then select your desired desktop. Also, you can manage apps in the multi-tasking view: 1 Select the Task View button to display all apps in use on the screen. 2 Select to enter the apps or close the apps.

15

Chapter 2. Starting to use Windows 10

Putting the computer to sleep or shutting it down - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

When you have finished working with your computer, you can put it to sleep or shut it down.

Putting your computer to sleep

If you will be away from your computer for only a short time, put the computer to sleep. When the computer is in sleep mode, you can quickly wake it to resume use, bypassing the startup process. To put the computer to sleep, do one of the following: Close the display lid. Press and hold the Power key for about 1 to 5 seconds. Select the Start button, then select Power Sleep.

To wake up the computer, perform the following: Press any key on the keyboard.

Note: Put your computer to sleep before you move it. Moving your computer while the hard disk drive is spinning can damage the hard disk, causing loss of data.

16

Chapter 2. Starting to use Windows 10

Shutting down the computer

If you are not going to use your computer for a long time, shut it down. To shut down your computer, do one of the following: Select the Start button, then select Power Shut down.

Right-click or press the Start button in the lower-left corner and select Shut down or sign out Shut down.

17

Chapter 2. Starting to use Windows 10

Connecting to a wireless network - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Enabling wireless connection

To enable wireless functions, do one of the following:

Select the ACTION CENTER icon in the notification area, and then deselect Airplane mode.

Press to disable airplane mode. Select Settings Network & Internet Airplane mode to open the

network configuration page. Then toggle the airplane mode switch to Off.

Connecting to a wireless network

After wireless has been enabled, the computer will automatically scan for available wireless networks and display them in the wireless network list. To connect to a wireless network, click the network name in the list, and then click Connect.

Note: Some networks require a network security key or passphrase for connection. To connect to one of those networks, ask the network administrator or the Internet service provider (ISP) for the security key or passphrase.

18

Chapter 2. Starting to use Windows 10

Get help from Windows - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

If you have a problem with the operating system, see the Windows Get Started app. To open it, do the following: Move the cursor to the lower-left corner, and then select the Start button.

Select Get Started from All apps.

19

Chapter 3. Recovery system

Push-button reset - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Push-button reset is a built-in recovery tool that enables users to restore their operating system to its original state. This preserves their data and important customizations, without the need to back up their data in advance. The following Push-button reset features are available to users from multiple locations within Windows:

Refreshing the computer

Fixes software problems by reinstalling the factory default configuration. This preserves the users data, important settings, and any Windows Store apps previously purchased from the Windows Store.

Resetting the computer

Prepares the computer for recycling or transfer of ownership. This reinstalls the factory default configuration and returns all user data and applications to the state of their original Out-of-Box Experience (OOBE).

Using Push-button reset

Push-button reset can be launched using one of the following methods: Novo button:

- Shut down the computer and wait at least five seconds. Press the Novo button and then select System Recovery.

Settings: - Settings Update & security Recovery Advanced startup select

Restart now. For more instructions, see the Windows Help and Support file on your computer.

When I purchased my computer, it included a copy of Windows. How can I determine whether the copy of Windows is preinstalled by Lenovo?

On the outside of the sales package of your computer, you should find a label containing configuration information for your computer. Check the printed string next to OS. If it contains Windows or WIN, the copy of Windows was preinstalled by Lenovo.

20

Chapter 3. Recovery system

I uninstalled a preinstalled software, but there is no significant increase in the free drive space.

The copy of Windows running on your computer may be Compact technology enabled. For computers with Compact technology enabled Windows, the majority of files needed for preinstalled software are installed on the Recovery Partition and wont be deleted through normal uninstallation.

How can I determine whether the Windows running on my computer is Compact technology enabled?

Compact technology is normally enabled on copies of Windows 10 Update running on SSD (or eMMC) -only computer models. To check your computer, 1 Right-click the Start button in the lower-left corner and select Disk

Management. 2 The Disk Management program starts. If Wim Boot is labeled on the Windows partition (as illustrated), Compact technology is enabled on your copy of Windows.

Where can I find drivers for the various hardware devices of my computer? If your computer is preinstalled with a Windows operating system, first check the installation program on the D partition of your hard disk (for select models, on the C partition). If you cannot find the drivers for all the hardware devices that you need there, download the drivers from the Lenovo consumer support website.

Note: The Lenovo support Web site contains the latest drivers.

21

Chapter 4. Troubleshooting

Frequently asked questions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

This section lists frequently asked questions by category.

Finding information

What safety precautions should I follow when using my computer? The Lenovo Safety and General Information Guide which came with your computer contains safety precautions for using your computer. Read and follow all the precautions when using your computer.

Where can I find the hardware specifications for my computer? You can find hardware specification for your computer on the printed flyers which came with your computer.

Where can I find warranty information? For the warranty applicable to your computer, including the warranty period and type of warranty service, see the Lenovo limited warranty flyer that came with your computer.

Drivers and preinstalled software

Where are the installation discs for Lenovo preinstalled software (desktop software)?

Your computer does not come with installation discs for Lenovo preinstalled software. If you need to reinstall any preinstalled software, you can find the installation program on the D partition of your hard disk (for select models, on the C partition). If you cannot find the installation program there, you can also download it from the Lenovo consumer support website.

Where can I find drivers for the various hardware devices of my computer? If your computer is preinstalled with a Windows operating system, Lenovo provides drivers for all the hardware devices that you need on the D partition of your hard disk (for select models, on the C partition). You can also download the latest device drivers from the Lenovo consumer support website.

22

Chapter 4. Troubleshooting

BIOS setup utility

What is the BIOS setup utility? The BIOS setup utility is ROM-based software. It displays basic computer information and provides options for setting boot devices, security, hardware mode, and other preferences.

How can I start the BIOS setup utility? To start the BIOS setup utility: 1 Shut down the computer. 2 Press the Novo button and then select BIOS Setup.

How can I change the boot mode? There are two boot modes: UEFI and Legacy Support. To change the boot mode, start the BIOS setup utility and set boot mode to UEFI or Legacy Support on the boot menu.

When do I need to change the boot mode? The default boot mode for your computer is UEFI mode. If you need to install a legacy operating system, such as Windows, Linux or Dos, etc (that is, any operating system before Windows 8) on your computer, you must change the boot mode to Legacy Support. The legacy operating system, such as Windows, Linux or Dos, etc cannot be installed if you don't change the boot mode.

Getting help

How can I contact the customer support center? See Chapter 3. Getting help and service of Lenovo Safety and General Information Guide.

23

Chapter 4. Troubleshooting

Troubleshooting - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Display problems

When I turn on the computer, nothing appears on the screen.

If the screen is blank, make sure that: - The AC power adapter is connected to the

computer, and the power cord is plugged into a working electrical outlet.

- The computer power is on. Press the Power button again for confirmation.

If these items are set correctly, and the screen remains blank, have the computer serviced.

When I turn on the computer, only a white cursor appears on a blank screen.

Restore backed-up files to your Windows environment or the entire contents of your hard disk to its original factory contents using Push-button reset. If you still see only the cursor on the screen, have the computer serviced.

The screen goes blank while the computer is on.

Your power management is enabled. Do one of the following to resume from sleep mode: - Press any key on the keyboard. - Press F9 ( ) to confirm whether the backlight of

the LCD screen has been turned off.

Sleep problems

The critical low-battery error message appears, and the computer immediately turns off.

The battery power is getting low. Connect the AC power adapter to the computer.

The computer enters sleep mode immediately after Power-on.

Make sure that: - The battery is charged. - The operating temperature is within the acceptable

range. See Chapter 2. Use and care Information in the Lenovo Safety and General Information Guide.

Note: If the battery is charged and the temperature is within range, have the computer serviced.

24

Chapter 4. Troubleshooting

The computer does not return from sleep mode and the computer does not work.

If your computer is in sleep mode, connect the AC power adapter to the computer, then press the Windows button or the Power button.

If the system still does not return from sleep mode, your system has stopped responding, and you cannot turn off the computer; reset the computer. Unsaved data may be lost. To reset the computer, press and hold the Power button for eight seconds or more. If the computer still does not reset, remove the AC power adapter.

Display panel problems

The screen is blank. Do the following: - If you are using the AC power adapter or the

battery, and the battery status indicator is on, press F12 ( ) to make the screen brighter.

- If the power indicator is blinking, press the Power button to resume from sleep mode.

- Press F9 ( ) to confirm whether the backlight of the LCD screen has been turned off.

- If the problem persists, follow the solution in the next problem The screen is unreadable or distorted.

The screen is unreadable or distorted.

Make sure that: - The screen resolution and color quality are correctly

set. - The monitor type is correct.

Incorrect characters appear on the screen.

Is the operating system or programs installed correctly? If they are installed and configured correctly, have the computer serviced.

Sound problems

No sound can be heard from the speakers even when the volume is turned up.

Make sure that: - The Mute function is off. - The combo audio jack is not being used. - Speakers are selected as the playback device.

25

Chapter 4. Troubleshooting

Battery problems

Your computer shuts down before the battery status indicator shows empty. -or- Your computer operates after the battery status indicator shows empty.

Recharge the battery.

Other problems

Your computer does not respond.

To turn off your computer, press and hold the Power button for eight seconds or more. If the computer still does not respond, remove the AC power adapter.

Your computer might lock when it enters sleep mode during a communication operation. Disable the sleep timer when you are working on the network.

The connected external device does not work.

Do not connect or disconnect any external device cables other than USB while the computer power is on. Otherwise, you might damage your computer.

When using high power consumption external devices, such as an external USB optical drive, use an external device power adapter. Otherwise, the device may not be recognized, or the system may shut down as a result.

26

Appendix A. CRU instructions

Customer Replaceable Units (CRUs) are parts that can be upgraded or replaced by the customer. If a CRU is determined to be defective during the warranty period, a replacement CRU will be provided to the customer. Customers are responsible for installing the self-service CRUs for this product. Customers also can install optional-service CRUs, which might require some technical skills or tools, or request that a technician install the optional-service CRU under the terms of the applicable warranty service type for your country or region.

CAUTION: Set the built-in battery in Ship Mode before replacing a CRU or sending your computer for service. 1 Turn off the computer and disconnect the AC adapter. 2 Press Fn + S + V. 3 Press the Power button to verify if Ship Mode has been set.

Notes: The illustrations used in this chapter are of the Lenovo ideapad 320-17IKB, unless

otherwise stated. The illustrations in this manual might differ from the actual product. Please refer to the

actual product. The CRU service is only applicable to certain countries.

Note: When set in Ship Mode, the battery does not supply power to the computer. To awake the battery from Ship Mode, connect the AC adapter to your computer.

27

Appendix A. CRU instructions

Replacing the optical drive - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

To replace the optical drive, do the following: 1 Turn off the computer. Disconnect the AC power adapter and all cables

from the computer. 2 Close the computer display and turn the computer over. 3 Remove the screw .a

a

28

Appendix A. CRU instructions

4 Gently pull the optical drive out from its cavity .

5 Insert a new optical drive and tighten the screw to secure the drive. 6 Turn the computer over again. 7 Connect the AC power adapter and the cables to the computer.

b

b

29

Appendix A. CRU instructions

The following table provides a list of CRUs for your computer, and informs you of where to find replacement instructions. Self-service CRUs

Safety, Warranty, and Setup Guide User Guide

AC power adapter

Optical drive

30

Trademarks

The following terms are trademarks or registered trademarks of Lenovo in the United States, other countries, or both.

Lenovo OneKey

Microsoft and Windows are trademarks of Microsoft Corporation in the United States, other countries, or both.

Other company, products, or service names may be trademarks or service marks of ot

Manualsnet FAQs

If you want to find out how the IdeaPad 320E-17IKB Lenovo works, you can view and download the Lenovo IdeaPad 320E-17IKB Laptop User Guide on the Manualsnet website.

Yes, we have the User Guide for Lenovo IdeaPad 320E-17IKB as well as other Lenovo manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User Guide should include all the details that are needed to use a Lenovo IdeaPad 320E-17IKB. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Lenovo IdeaPad 320E-17IKB Laptop User Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Lenovo IdeaPad 320E-17IKB Laptop User Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Lenovo IdeaPad 320E-17IKB Laptop User Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Lenovo IdeaPad 320E-17IKB Laptop User Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Lenovo IdeaPad 320E-17IKB Laptop User Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.