Contents

Lenovo V480c Laptop Hardware Maintenance Manual PDF

1 of 114
1 of 114

Summary of Content for Lenovo V480c Laptop Hardware Maintenance Manual PDF

Hardware Maintenance Manual

Lenovo V480 and V480c

Note: Before using this information and the product it supports, be sure to read the general information under Appendix A Notices on page 105.

Fourth Edition (November 2012)

Copyright Lenovo 2012.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant a General Services Administration GSA contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925.

Contents

About this manual. . . . . . . . . . . iii

Chapter 1. Safety information. . . . . . 1 General safety . . . . . . . . . . . . . . . . 1 Electrical safety . . . . . . . . . . . . . . . 2 Safety inspection guide . . . . . . . . . . . . 3 Handling devices that are sensitive to electrostatic discharge. . . . . . . . . . . . . . . . . . 3 Grounding requirements . . . . . . . . . . . . 4 Safety notices (multilingual translations) . . . . . . 4 Laser compliance statement (multilingual translations) . . . . . . . . . . . . . . . . 19

Chapter 2. Important service information . . . . . . . . . . . . . . 27 Strategy for replacing FRUs . . . . . . . . . 27

Strategy for replacing a hard disk drive . . . 28 Important notice for replacing a system board . . . . . . . . . . . . . . . . 28

Important information about replacing RoHS compliant FRUs . . . . . . . . . . . . . . 28

Chapter 3. General checkout . . . . . 29 What to do first . . . . . . . . . . . . . . 29 Power system checkout . . . . . . . . . . . 30

Checking the ac power adapter . . . . . . 30 Checking operational charging . . . . . . 31 Checking the battery pack . . . . . . . . 31

Chapter 4. Related service information . . . . . . . . . . . . . . 33 Recovering the computer settings . . . . . . . 33 Passwords . . . . . . . . . . . . . . . . 33

Power-on password . . . . . . . . . . . 34 Supervisor password . . . . . . . . . . 34

Power management . . . . . . . . . . . . 34 Screen blank mode . . . . . . . . . . . 34 Sleep mode . . . . . . . . . . . . . . 34 Hibernation mode . . . . . . . . . . . 35

Chapter 5. Lenovo V480 and V480c . . 37 Specifications . . . . . . . . . . . . . . . 37 Status indicators . . . . . . . . . . . . . . 38 Fn key combinations . . . . . . . . . . . . 39

Chapter 6. FRU replacement notices . . . . . . . . . . . . . . . . 41

Screw notices . . . . . . . . . . . . . . . 41

Chapter 7. Removing or replacing a FRU . . . . . . . . . . . . . . . . . . 43 General guidelines . . . . . . . . . . . . . 43 1010 Battery pack . . . . . . . . . . . . . 44 1020 Bottom slot cover . . . . . . . . . . . 44 1030 Optical drive . . . . . . . . . . . . . 45 1040 Memory modules . . . . . . . . . . . 45 1050 Hard disk drive . . . . . . . . . . . . 46 1060 PCI Express Mini Card for wireless LAN . . 48 1070 mSATA solid-state drive . . . . . . . . . 49 1080 Backup battery . . . . . . . . . . . . 50 1090 Keyboard . . . . . . . . . . . . . . 51 1100 Keyboard bezel . . . . . . . . . . . . 53 1120 Fingerprint board and LED board . . . . . 55 1130 Power board . . . . . . . . . . . . . 57 1140 Microphone assembly . . . . . . . . . 58 1150 I/O board . . . . . . . . . . . . . . 59 1160 System board assembly and USB board . . 61 1170 Thermal fan assembly . . . . . . . . . 64 1180 Microprocessor . . . . . . . . . . . . 66 1190 LCD unit . . . . . . . . . . . . . . . 67 1200 Speaker assembly . . . . . . . . . . . 69 1210 DC-in sub card and base cover . . . . . . 70 2010 LCD front bezel . . . . . . . . . . . . 71 2020 Integrated camera . . . . . . . . . . . 73 2030 LCD panel, LCD cable, and hinges . . . . 74 2040 Antenna assembly . . . . . . . . . . . 76

Chapter 8. Locations . . . . . . . . . 79 Front view . . . . . . . . . . . . . . . . 79 Bottom view . . . . . . . . . . . . . . . 80

Chapter 9. Parts list . . . . . . . . . . 81 Overall . . . . . . . . . . . . . . . . . . 82 LCD FRUs . . . . . . . . . . . . . . . . 88 Keyboard . . . . . . . . . . . . . . . . . 91 Miscellaneous parts . . . . . . . . . . . . 98 ac power adapters . . . . . . . . . . . . . 99 Power cords . . . . . . . . . . . . . . . 100

Appendix A. Notices. . . . . . . . . 105 Electronic emissions notices . . . . . . . . . 106 Trademarks . . . . . . . . . . . . . . . . 106

Copyright Lenovo 2012 i

ii Hardware Maintenance Manual

About this manual

This manual provides service and reference information for the following Lenovo products.

Machine Machine type (MT)

Lenovo V480 4761, 20143

Lenovo V480c 4762, 20159

Use this manual to troubleshoot problems.

The manual is divided into the following sections:

The common sections provide general information, guidelines, and safety information required for servicing computers.

The product-specific sections include service, reference, and product-specific parts information.

Important:

This manual is intended only for trained service technicians who are familiar with Lenovo products. Use this manual to troubleshoot problems effectively.

Before servicing a Lenovo product, be sure to read all the information under Chapter 1 Safety information on page 1 and Chapter 2 Important service information on page 27.

Copyright Lenovo 2012 iii

iv Hardware Maintenance Manual

Chapter 1. Safety information

This chapter presents the following safety information that you need to be familiar with before you service a Lenovo notebook computer. General safety on page 1 Electrical safety on page 2 Safety inspection guide on page 3 Handling devices that are sensitive to electrostatic discharge on page 3 Grounding requirements on page 4 Safety notices (multilingual translations) on page 4 Laser compliance statement (multilingual translations) on page 19

General safety Follow these rules to ensure general safety:

Observe good housekeeping in the area of the machines during and after maintenance.

When lifting any heavy object:

1. Ensure that you can stand safely without slipping.

2. Distribute the weight of the object equally between your feet.

3. Use a slow lifting force. Never move suddenly or twist when you attempt to lift.

4. Lift by standing or by pushing up with your leg muscles; this action removes the strain from the muscles in your back. Do not attempt to lift any object that weighs more than 16 kg (35 lb) or that you think is too heavy for you.

Do not perform any action that causes hazards to the customer, or that makes the equipment unsafe.

Before you start the machine, ensure that other service technicians and the customer's personnel are not in a hazardous position.

Place removed covers and other parts in a safe place, away from all personnel, while you are servicing the machine.

Keep your toolcase away from walk areas so that other people will not trip over it.

Do not wear loose clothing that can be trapped in the moving parts of a machine. Ensure that your sleeves are fastened or rolled up above your elbows. If your hair is long, fasten it.

Insert the ends of your necktie or scarf inside clothing or fasten it with a nonconductive clip, about 8 centimeters (3 inches) from the end.

Do not wear jewelry, chains, metal-frame eyeglasses, or metal fasteners for your clothing, because metal objects are good electrical conductors.

Wear safety glasses when you are hammering, drilling, soldering, cutting wire, attaching springs, using solvents, or working in any other conditions that might be hazardous to your eyes.

After service, reinstall all safety shields, guards, labels, and ground wires. Replace any safety device that is worn or defective.

Reinstall all covers correctly before returning the machine to the customer.

Fan louvers on the machine help to prevent overheating of internal components. Do not obstruct fan louvers or cover them with labels or stickers.

Copyright Lenovo 2012 1

Electrical safety Observe the following rules when working on electrical equipment.

Important:

Use only approved tools and test equipment. Some hand tools have handles covered with a soft material that does not insulate you when working with live electrical currents. Many customers have, near their equipment, rubber floor mats that contain small conductive fibers to decrease electrostatic discharges. Do not use this type of mat to protect yourself from electrical shock.

Find the room emergency power-off (EPO) switch, disconnecting switch, or electrical outlet. If an electrical accident occurs, you can then operate the switch or unplug the power cord quickly.

Do not work alone under hazardous conditions or near equipment that has hazardous voltages.

Disconnect all power before: Performing a mechanical inspection Working near power supplies Removing or installing main units

Before you start to work on the machine, unplug the power cord. If you cannot unplug it, ask the customer to power-off the wall box that supplies power to the machine, and to lock the wall box in the off position.

If you need to work on a machine that has exposed electrical circuits, observe the following precautions: Ensure that another person, familiar with the power-off controls, is near you.

Attention: Another person must be there to switch off the power, if necessary. Use only one hand when working with powered-on electrical equipment; keep the other hand in your

pocket or behind your back.

Attention: An electrical shock can occur only when there is a complete circuit. By observing the above rule, you may prevent a current from passing through your body.

When using testers, set the controls correctly and use the approved probe leads and accessories for that tester.

Stand on suitable rubber mats (obtained locally, if necessary) to insulate you from grounds such as metal floor strips and machine frames.

Observe the special safety precautions when you work with very high voltages; Instructions for these precautions are in the safety sections of maintenance information. Use extreme care when measuring high voltages.

Regularly inspect and maintain your electrical hand tools for safe operational condition.

Do not use worn or broken tools and testers.

Never assume that power has been disconnected from a circuit. First, check that it has been powered off.

Always look carefully for possible hazards in your work area. Examples of these hazards are moist floors, nongrounded power extension cables, power surges, and missing safety grounds.

Do not touch live electrical circuits with the reflective surface of a plastic dental mirror. The surface is conductive; such touching can cause personal injury and machine damage.

Do not service the following parts with the power on when they are removed from their normal operating places in a machine: Power supply units Pumps Blowers and fans Motor generators Similar units to listed above This practice ensures correct grounding of the units.

If an electrical accident occurs:

2 Hardware Maintenance Manual

Use caution; do not become a victim yourself. Switch off power. Send another person to get medical aid.

Safety inspection guide The purpose of this inspection guide is to assist you in identifying potentially unsafe conditions. As each machine was designed and built, required safety items were installed to protect users and service technicians from injury. This guide addresses only those items. You should use good judgment to identify potential safety hazards due to attachment of non-Lenovo features or options not covered by this inspection guide.

If any unsafe conditions are present, you must determine how serious the apparent hazard could be and whether you can continue without first correcting the problem.

Consider these conditions and the safety hazards they present:

Electrical hazards, especially primary power (primary voltage on the frame can cause serious or fatal electrical shock)

Explosive hazards, such as a damaged CRT face or a bulging capacitor

Mechanical hazards, such as loose or missing hardware

To determine whether there are any potentially unsafe conditions, use the following checklist at the beginning of every service task. Begin the checks with the power off, and the power cord disconnected.

Checklist:

1. Check exterior covers for damage (loose, broken, or sharp edges).

2. Power off the computer. Disconnect the power cord.

3. Check the power cord for:

a. A third-wire ground connector in good condition. Use a meter to measure third-wire ground continuity for 0.1 ohm or less between the external ground pin and the frame ground.

b. The power cord should be the type specified in the parts list.

c. Insulation must not be frayed or worn.

4. Check for cracked or bulging batteries.

5. Remove the cover.

6. Check for any obvious non-Lenovo alterations. Use good judgment as to the safety of any non-Lenovo alterations.

7. Check inside the unit for any obvious unsafe conditions, such as metal filings, contamination, water or other liquids, or signs of fire or smoke damage.

8. Check for worn, frayed, or pinched cables.

9. Check that the power-supply cover fasteners (screws or rivets) have not been removed or tampered with.

Handling devices that are sensitive to electrostatic discharge Any computer part containing transistors or integrated circuits (ICs) should be considered sensitive to electrostatic discharge (ESD.) ESD damage can occur when there is a difference in charge between objects. Protect against ESD damage by equalizing the charge so that the machine, the part, the work mat, and the person handling the part are all at the same charge.

Notes:

1. Use product-specific ESD procedures when they exceed the requirements noted here.

Chapter 1. Safety information 3

2. Ensure that the ESD protective devices you use have been certified (ISO 9000) as fully effective.

When handling ESD-sensitive parts:

Keep the parts in protective packages until they are inserted into the product.

Avoid contact with other people.

Wear a grounded wrist strap against your skin to eliminate static on your body.

Prevent the part from touching your clothing. Most clothing is insulative and retains a charge even when you are wearing a wrist strap.

Use a grounded work mat to provide a static-free work surface. The mat is especially useful when handling ESD-sensitive devices.

Select a grounding system, such as those listed below, to provide protection that meets the specific service requirement.

Note: The use of a grounding system to guard against ESD damage is desirable but not necessary.

Attach the ESD ground clip to any frame ground, ground braid, or green-wire ground.

When working on a double-insulated or battery-operated system, use an ESD common ground or reference point. You can use coax or connector-outside shells on these systems.

Use the round ground prong of the ac plug on ac-operated computers.

Grounding requirements Electrical grounding of the computer is required for operator safety and correct system function. Proper grounding of the electrical outlet can be verified by a certified electrician.

Safety notices (multilingual translations) The safety notices in this section are provided in the following languages: English Arabic Brazilian Portuguese French German Hebrew Japanese Korean Spanish Traditional Chinese

DANGER

DANGER

4 Hardware Maintenance Manual

DANGER

DANGER

DANGER

DANGER

DANGER

Chapter 1. Safety information 5

DANGER

6 Hardware Maintenance Manual

Chapter 1. Safety information 7

PERIGO

PERIGO

PERIGO

PERIGO

PERIGO

PERIGO

8 Hardware Maintenance Manual

PERIGO

PERIGO

DANGER

DANGER

DANGER

Chapter 1. Safety information 9

DANGER

DANGER

DANGER

DANGER

DANGER

VORSICHT

10 Hardware Maintenance Manual

VORSICHT

VORSICHT

VORSICHT

VORSICHT

Chapter 1. Safety information 11

VORSICHT

VORSICHT

VORSICHT

12 Hardware Maintenance Manual

Chapter 1. Safety information 13

14 Hardware Maintenance Manual

Chapter 1. Safety information 15

16 Hardware Maintenance Manual

Chapter 1. Safety information 17

18 Hardware Maintenance Manual

Laser compliance statement (multilingual translations) The laser compliance statements in this section are provided in the following languages: English Arabic Brazilian Portuguese French German Hebrew Japanese Korean Spanish Traditional Chinese

Chapter 1. Safety information 19

20 Hardware Maintenance Manual

Chapter 1. Safety information 21

22 Hardware Maintenance Manual

Chapter 1. Safety information 23

24 Hardware Maintenance Manual

Chapter 1. Safety information 25

26 Hardware Maintenance Manual

Chapter 2. Important service information

This chapter presents the following important service information that applies to all machine types supported by this manual: Strategy for replacing FRUs on page 27

Strategy for replacing a hard disk drive on page 28 Important notice for replacing a system board on page 28

Important information about replacing RoHS compliant FRUs on page 28

Important: BIOS and device driver fixes are customer-installable. The BIOS and device drivers are available at http://www.lenovo.com/support.

Strategy for replacing FRUs

Before replacing parts:

Ensure that all software fixes, drivers, and BIOS downloads are installed before replacing any FRUs listed in this manual.

After a system board is replaced, ensure that the latest BIOS is installed to the system board before completing the service action.

To download software fixes, drivers, and BIOS, do the following:

1. Go to http://www.lenovo.com/support.

2. Click Download Drivers & Software. The Web site offers three options to begin your search:

Search by product number

Search through the product auto-detect function

Search by product category

3. Follow the directions on the screen and install the necessary software.

4. Restart the computer if necessary.

Notes: If you need to improve the computer performance, you also could download and install the latest BIOS utility from the Support Web site.

Do not try to update the BIOS settings for any computer unless you have been trained and certified. An untrained person runs the risk of damaging the computer.

Before installing the latest utility, ensure that the battery is fully charged and an ac power adapter is connected.

Do not turn off or put your computer into sleep or hibernation until the update has been completed. Otherwise, the system board might be damaged.

Use the following strategy to prevent unnecessary expense for replacing and servicing FRUs:

If you are instructed to replace a FRU but the replacement does not correct the problem, reinstall the original FRU before you continue.

Some computers have both a processor board and a system board. If you are instructed to replace either the processor board or the system board, and replacing one of them does not correct the problem, reinstall that board, and then replace the other one.

Copyright Lenovo 2012 27

If an adapter or a device consists of more than one FRU, any of the FRUs may be the cause of the error. Before replacing the adapter or device, remove the FRUs, one by one, to see if the symptoms change. Replace only the FRU that changed the symptoms.

Strategy for replacing a hard disk drive Always try to run a low-level format before replacing a hard disk drive (HDD). This will cause all customer data on the hard disk to be lost. Be sure that the customer has a current backup of the data before doing this task.

Attention: The drive startup sequence in the computer you are servicing may have been changed. Be extremely careful during write operations such as copying, saving, or formatting. If you select an incorrect drive, data or programs can be overwritten.

Important notice for replacing a system board Some components mounted on a system board are very sensitive. Improper handling of a system board can cause damage to those components, and may cause a system malfunction.

Attention: When handling a system board:

Do not drop a system board or apply any excessive force to it.

Avoid rough handling of any kind.

Avoid bending a system board and hard pushing to prevent cracking at each BGA (Ball Grid Array) chipset.

Important information about replacing RoHS compliant FRUs RoHS, The Restriction of Hazardous Substances in Electrical and Electronic Equipment Directive (2002/95/EC) is a European Union legal requirement affecting the global electronics industry. RoHS requirements must be implemented on Lenovo products placed on the market after June 2006. Products on the market before June 2006 are not required to have RoHS compliant parts. If the original FRU parts are non-compliant, the replacement parts also can be non-compliant. That is, if the original FRU parts are RoHS compliant, the replacement part also must be RoHS compliant.

Note: RoHS and non-RoHS FRU part numbers with the same fit and function are identified by the unique FRU part numbers.

Lenovo plans to transit to RoHS compliance before the implementation date and expects its suppliers to be ready to meet Lenovos requirements and schedule in the European Union. Products sold between 2005 and 2006 might contain some RoHS compliant FRUs. The following statement pertains to the products with RoHS compliant FRUs.

RoHS compliant FRUs have unique FRU part numbers. Before or after the RoHS implementation date, the failed RoHS compliant parts must be replaced with compliant parts and only the following FRUs can be used: identified as compliant in the Hardware Maintenance Manual or direct substitutions can be used.

Compliant FRUs identified in Hardware Maintenance Manual

Direct substitutions with different FRU part numbers automatically shipped by the distribution center at the time of order

For products shipped after June 2006

Current or original part Replacement FRU

Must be RoHS Must be RoHS

28 Hardware Maintenance Manual

Chapter 3. General checkout

This chapter presents following information: What to do first on page 29 Power system checkout on page 30

Before you go to the checkout guide, be sure to read the following important notes.

Important notes:

Only certified trained personnel should service the computer.

Before replacing any FRU, read the entire page on removing and replacing FRUs.

When you replace FRUs, it is recommended to use new nylon-coated screws.

Be extremely careful during such write operations as copying, saving, or formatting. Drives in the computer that you are servicing sequence might have been altered. If you select an incorrect drive, data or programs might be overwritten.

Replace a FRU only with another FRU of the correct model. When you replace a FRU, make sure that the model of the machine and the FRU part number are correct by referring to the FRU parts list.

A FRU should not be replaced because of a single, unreproducible failure. Single failures can occur for a variety of reasons that have nothing to do with a hardware defect, such as cosmic radiation, electrostatic discharge, or software errors. Consider replacing a FRU only when a problem recurs. If you suspect that a FRU is defective, clear the error log and run the test again. If the error does not recur, do not replace the FRU.

Be careful not to replace a nondefective FRU.

What to do first When you do return a FRU, you must include the following information in the parts exchange form or parts return form that you attach to it: 1. Name and phone number of service technician 2. Date of service 3. Date on which the machine failed 4. Date of purchase 5. Procedure index and page number in which the failing FRU was detected 6. Failing FRU name and part number 7. Machine type, model number, and serial number 8. Customer's name and address

Note: During the warranty period, the customer may be responsible for repair costs if the computer damage was caused by misuse, accident, modification, unsuitable physical or operating environment, or improper maintenance by the customer. Following is a list of some common items that are not covered under warranty and some symptoms that might indicate that the system was subject to stress beyond normal use.

Before checking problems with the computer, determine whether the damage is covered under the warranty by referring to the following list:

The following are not covered under warranty: LCD panel cracked from the application of excessive force or from being dropped Scratched (cosmetic) parts Distortion, deformation, or discoloration of the cosmetic parts Plastic parts, latches, pins, or connectors that have been cracked or broken by excessive force Damage caused by liquid spilled into the system Damage caused by the improper insertion of a PC Card or the installation of an incompatible card Improper disc insertion or use of an optical drive

Copyright Lenovo 2012 29

Diskette drive damage caused by pressure on the diskette drive cover, foreign material in the drive, or the insertion of a diskette with multiple labels

Damaged or bent diskette eject button Fuses blown by attachment of a nonsupported device Forgotten computer password (making the computer unusable) Sticky keys caused by spilling a liquid onto the keyboard Use of an incorrect ac power adapter on laptop products

The following symptoms might indicate damage caused by nonwarranted activities: Missing parts might be a symptom of unauthorized service or modification. If the spindle of a hard disk drive becomes noisy, it may have been subject to excessive force, or dropped.

Power system checkout To verify a symptom, do the following: 1. Turn off the computer. 2. Remove the battery pack. 3. Connect the ac power adapter. 4. Check that power is supplied when you turn on the computer. 5. Turn off the computer. 6. Disconnect the ac power adapter and install the charged battery pack. 7. Check that the battery pack supplies power when you turn on the computer.

If you suspect a power problem, see the appropriate one of the following power supply checkouts: Checking the ac power adapter on page 30 Checking operational charging on page 31 Checking the battery pack on page 31

Checking the ac power adapter You are here because the computer fails only when the ac power adapter is used.

If the power-on indicator does not turn on, check the power cord of the ac power adapter for correct continuity and installation.

If the computer does not charge during operation, go to Checking operational charging on page 31

To check the ac power adapter, do the following: 1. Unplug the ac power adapter cable from the computer. 2. Measure the output voltage at the plug of the ac power adapter cable.

Pin Voltage (V dc)

1 +20

2 0

3 Ground 1

2

3

(20V)

Note: Output voltage of pin no.2 of the ac power adapter may different from the one you are servicing. 3. If the voltage is not correct, replace the ac power adapter. 4. If the voltage is acceptable, do the following:

Replace the system board.

If the problem persists, go to Chapter 5 Lenovo V480 and V480c on page 37.

30 Hardware Maintenance Manual

Note: Noise from the ac power adapter does not always indicate a defect.

Checking operational charging To check whether the battery charges properly during operation, use a discharged battery pack or a battery pack that has less than 50% of the total power remaining when installed in the computer.

Perform operational charging. If the battery status indicator or icon does not turn on, remove the battery pack and let it return to room temperature. Reinstall the battery pack. If the charge indicator or icon still does not turn on, replace the battery pack.

If the charge indicator still does not turn on, replace the system board. Then reinstall the battery pack. If it is still not charged, go to the next section.

Checking the battery pack The battery status icon in the Windows notification area displays the percentage of battery power remaining.

To check for detailed battery status information on the Windows operating system, do the following:

Windows 7: Launch the Power Manager program and click the Battery tab.

Windows 8:

Press the recovery button to launch the Lenovo Solution Center program, and then click Battery.

Launch the Lenovo Settings program from the Start screen, and then click Power.

Note: If the battery pack becomes hot, it may not be able to be charged. Remove it from the computer and leave it at room temperature for a while. After it cools down, reinstall and recharge it.

To check the battery pack, do the following: 1. Power off the computer. 2. Remove the battery pack and measure the voltage between battery terminals 1 (+) and 7 (-).

Terminal Voltage (V dc)

1 + 0 to + 14

7 Ground (-)

1(+) 2(+)

3 4 5 6(-)

7(-)

3. If the voltage is less than +9.0 V dc, the battery pack has been discharged.

Note: Recharging will take at least three hours, even if the indicator does not turn on.

If the voltage is still less than +9.0 V dc after recharging, replace the battery. 4. If the voltage is more than +9.0 V dc, measure the resistance between battery terminals 5 and 7. The

resistance must be 4 to 30 K.

If the resistance is not correct, replace the battery pack. If the resistance is correct, replace the system board.

Chapter 3. General checkout 31

32 Hardware Maintenance Manual

Chapter 4. Related service information

This chapter presents the following information: Recovering the computer settings on page 33 Passwords on page 33 Power management on page 34

Recovering the computer settings This topic provides information about the recovery programs that are available for you to recover the computer settings.

Windows 7: The following recovery programs are available on computers with a Windows 7 operating system:

OneKey Recovery Pro

The OneKey Recovery Pro program enables you to back up all your hard disk drive contents, including the operating system, data files, software programs, and personal settings. You can designate where the OneKey Recovery Pro program stores the backup. After you have backed up the contents on the hard disk drive, you can restore the complete contents of the hard disk drive, restore only the desired files, or restore only the Windows operating system and applications.

Product Recovery

The Product Recovery program enables you to restore the computer settings to the factory default settings through recovery media.

Attention: When you use the Product Recovery program to restore the computer settings, all the data you have stored on the hard disk drive will be deleted and the computer settings will be restored to the factory default settings. During the restoring process, you will be given the option to save one or more files currently on the hard disk drive to other media before the data is deleted.

Windows 8: The preinstalled Windows recovery program enables you to do the following:

Refreshing the computer without losing personal files

Restoring the computer to the factory default settings

Attention: When you use the Windows recovery program to restore the computer settings, all the data you have stored on the hard disk drive will be deleted and the computer will be restored to the factory default settings. To avoid data loss, back up your data in advance.

Configuring the advanced startup options

The advanced startup options enable you to do the following:

Changing the startup settings of the Windows operating system

Restoring the Windows operating system from a system image

Starting up from an external device

For more information about the recovery solutions, refer to the help information system of the programs.

Passwords As many as two passwords might be needed for a Lenovo notebook computer: the power-on password and the supervisor password.

Copyright Lenovo 2012 33

If any of these passwords has been set, a prompt for it will be displayed on the screen whenever the computer is turned on. The computer does not start until the password is entered.

Note: If only a supervisor password is set, the password prompt will not be displayed when the operating system is started.

Power-on password A power-on password protects the system from being turned on by an unauthorized person. The password must be entered before an operating system can be started.

Supervisor password A supervisor password protects the system information stored in the BIOS. The user must enter the supervisor password to access the BIOS and change the system configuration.

Attention: If you forget the password, there is no service procedure to reset the password. The system board must be replaced for a scheduled fee.

Power management Note: Power management modes are not supported for APM operating system.

To reduce power consumption, the computer has three power management modes: screen blank, sleep, and hibernation.

Screen blank mode In the following circumstances, the computer goes into screen blank mode:

The time set on the Turn off monitor timer on the Windows 7 operating system expires. To end screen blank mode and resume normal operation, press any key.

You have pressed Fn+F2. To end screen blank mode and resume normal operation, press Fn+F2.

Sleep mode When the computer enters sleep mode, the following events occur in addition to what occurs in screen blank mode: The LCD is powered off. The hard disk drive is powered off. The CPU stops.

To enter sleep mode, press Fn+F1.

In certain circumstances, the computer goes into sleep mode automatically:

If a suspend time has been set on the timer, and the user does not do any operation with the keyboard, the hard disk drive, the parallel connector, or the diskette drive within that time.

If the battery indicator blinks orange, indicating that the battery power is low.

To cause the computer to return from sleep mode and resume the operation, do one of the following: Press the Fn key. Open the LCD cover. Turn on the power button.

34 Hardware Maintenance Manual

Also, when the time set on the resume timer elapses, the computer automatically returns from sleep mode and resumes operation.

Note: The computer does not accept any input immediately after it enters sleep mode. Wait a few seconds before taking any action to reenter operation mode.

Hibernation mode In hibernation mode, the following occurs:

The system status, RAM, VRAM, and setup data are stored on the hard disk drive.

The system is powered off.

If you have defined one of the following actions as the event that causes the system to go into hibernation mode, perform that action.

Closing the lid.

Pressing the power button.

Also, the computer goes into hibernation mode automatically in either of the following conditions:

If a hibernation time has been set on the timer, and if the user does not do any operation with the keyboard, the hard disk drive, the parallel connector, or the diskette drive within that time.

If the timer conditions are satisfied in suspend mode.

When the power is turned on, the computer returns from hibernation mode and resumes operation. The hibernation file in the boot record on the hard disk drive is read, and system status is restored from the hard disk drive.

Chapter 4. Related service information 35

36 Hardware Maintenance Manual

Chapter 5. Lenovo V480 and V480c

This chapter presents the following product-specific service references and parts information:

Specifications on page 37

Status indicators on page 38

Fn key combinations on page 39

Specifications This topic lists the physical features for the Lenovo V480 and V480c models.

Processor

Windows 7: To view the system properties of your computer, click Start, right-click Computer; then click Properties.

Windows 8: From the desktop, move the cursor to the top-right or bottom-right corner of the screen to display the charms. Then click Settings PC info.

Memory

Double data rate 3 (DDR3) synchronous dynamic random access memory (SDRAM)

Storage device

2.5-inch (7 mm height or 9.5 mm height) hard disk drive

mSATA solid-state drive (on some models)

Note: If the computer is equipped with both a hard disk drive and an mSATA solid-state drive, do not use the mSATA solid-state drive as a bootable device. The mSATA solid-state drive is used for cache function only.

Display

Size: 14.0 inches (356 mm)

Resolution:

LCD: 1366-by-768

External monitor: Maximum 2048-by-1536

Integrated camera (on some models)

Keyboard

6-row Lenovo keyboard

Recovery button

Interface

Combo audio jack

Two USB 2.0 connectors

Two USB 3.0 connectors

RJ45 Ethernet connector

HDMI port

Copyright Lenovo 2012 37

External monitor connector

4-in-1 digital media card reader slot

Optical drive

12.7 mm Rambo optical drive (on some models)

12.7 mm Rambo/Blu-ray combo optical drive (on some models)

Wireless features

Integrated wireless LAN

100/1000 Mbps Ethernet communication

Security feature

Fingerprint reader (on some models)

Status indicators This topic presents the system status indicators that show the status of the computer.

5

1 2 3 4

Table 1. Status indicators

Indicator Meaning

1 Caps lock status indicator

White: Caps lock mode is enabled. You can type all alphabetic characters (A-Z) in uppercase directly. To enable or disable Caps lock mode, press the Caps lock key (CapsLk).

2 Numeric lock status indicator

White: The separate numeric keypad on the keyboard is enabled. To enable or disable the numeric keypad, press the Numeric Lock key (NmLk).

38 Hardware Maintenance Manual

Table 1. Status indicators (continued)

Indicator Meaning

3 Device access status indicator

On: The hard disk drive or optical drive is reading or writing data.

Attention:

When the indicator is on, do not put the computer into sleep mode or turn off the computer.

When the indicator is on, do not move the computer. Sudden physical shock might cause drive errors.

4 Active Protection System (APS) status indicator

White: The Active Protection System program is enabled.

Off: The Active Protection System program is disabled.

5 Power and battery status indicator

Green: The battery charge level is between 80% and 100%, or the battery discharge level is between 20% and 100%.

Slow blinking green: The battery charge level is between 20% and 80%, and charging is continuing. When the battery charge level reaches 80%, the battery status indicator stops blinking, but the charging might continue until the battery is 100% charged.

Slow blinking orange: The battery charge level is between 5% and 20%, and the charging is continuing. When the battery charge level reaches 20%, the blinking color changes to green.

Orange: The battery discharge level is between 5% and 20%.

Fast blinking orange: The battery charge or discharge level is 5% or less.

Off: The battery is detached or the computer is powered off.

Fn key combinations The following table describes the functions of Fn key combinations.

Table 2. Function key combinations

Key combination Description

Fn+Esc Windows 7: Launches the camera and audio settings window. The camera preview is turned on. Change the camera and audio settings as desired.

Windows 8: Turns on or off the camera.

Fn+F1 Puts the computer into sleep mode. To resume normal operation, press the Fn key only.

Fn+F2 Enables the backlight feature of the computer screen. To disable the feature, press Fn+F2.

Fn+F3 Switches between the computer display and an external monitor. Note: You also can use the Windows+P key combination to switch between the computer display and an external monitor.

Fn+F5 Enables or disables the built-in wireless networking features.

Fn+F6 Enables or disables the touch pad.

Fn+F8 Enables or disables the numeric keypad.

Fn+F9 Multimedia control: Start/Pause

Fn+F10 Multimedia control: Stop

Chapter 5. Lenovo V480 and V480c 39

Table 2. Function key combinations (continued)

Key combination Description

Fn+F11 Multimedia control: Skip to the previous track

Fn+F12 Multimedia control: Skip to the next track

Fn+PgUp Enables or disables the scroll lock function.

Fn+PrtSc Has the same function as the SysRq key on a conventional keyboard.

Fn+Home Has the same function as the Pause key on a conventional keyboard.

Fn+End Has the same function as the Break key on a conventional keyboard.

Fn+PgDn Has the same function as the Insert key on a conventional keyboard.

Fn + up/down arrow Increases or decreases the display brightness level.

Fn + left/right arrow Decreases or increases the sound volume.

40 Hardware Maintenance Manual

Chapter 6. FRU replacement notices

This chapter presents notices related to removing and replacing parts. Read this chapter carefully before replacing any FRU.

CRU statement for customers: You can resolve some problems with your product with a replacement part you can install yourself, called a Customer Replaceable Unit or CRU. Some CRUs are designated as self-service CRUs and others are designated as optional-service CRUs. Installation of self-service CRUs is your responsibility. For optional-service CRUs, you can either install the CRU yourself or you can request that a Service Provider install the CRU according to the warranty service for your product. If you intend on installing the CRU, Lenovo will ship the CRU to you. CRU information and replacement instructions are shipped with your product and are available from Lenovo at any time upon request. You can find a list of CRUs for your product in this Hardware Maintenance Manual. An electronic version of this manual can be found at http://www.lenovo.com/UserManuals. Follow the on-screen instructions to find the manual for your product. You might be required to return the defective CRU. When return is required: (1) return instructions, a prepaid shipping label, and a container will be included with the replacement CRU; and (2) you might be charged for the replacement CRU if Lenovo does not receive the defective CRU within thirty (30) days of your receipt of the replacement CRU. See your Lenovo Limited Warranty documentation for full details.

Screw notices Loose screws can cause a reliability problem. In the Lenovo notebook computer, this problem is addressed with special nylon-coated screws that have the following characteristics:

They maintain tight connections. They do not easily come loose, even with shock or vibration. They are harder to tighten.

Do the following when you service the computer:

Keep the screw kit in your tool bag. It is recommended to use new screws. It recommended to use each screw only once. Use a torque screwdriver if you have one.

Tighten screws as follows:

Plastic to plastic

Turn an additional 90 degrees after the screw head touches the surface of the plastic part.

Logic card to plastic

Turn an additional 180 degrees after the screw head touches the surface of the logic card.

Copyright Lenovo 2012 41

Notes:

Ensure that you use the correct screw. It is recommended to use new screws for replacements. If you have a torque screwdriver, tighten all screws firmly to the torque specified in the screw information table for each step.

Ensure that torque screw drivers are calibrated correctly following country specifications.

42 Hardware Maintenance Manual

Chapter 7. Removing or replacing a FRU

This chapter provides instructions on how to remove or replace a FRU.

CRU statement for customers: You can resolve some problems with your product with a replacement part you can install yourself, called a Customer Replaceable Unit or CRU. Some CRUs are designated as self-service CRUs and others are designated as optional-service CRUs. Installation of self-service CRUs is your responsibility. For optional-service CRUs, you can either install the CRU yourself or you can request that a Service Provider install the CRU according to the warranty service for your product. If you intend on installing the CRU, Lenovo will ship the CRU to you. CRU information and replacement instructions are shipped with your product and are available from Lenovo at any time upon request. You can find a list of CRUs for your product in this Hardware Maintenance Manual. An electronic version of this manual can be found at http://www.lenovo.com/UserManuals. Follow the on-screen instructions to find the manual for your product. You might be required to return the defective CRU. When return is required: (1) return instructions, a prepaid shipping label, and a container will be included with the replacement CRU; and (2) you might be charged for the replacement CRU if Lenovo does not receive the defective CRU within thirty (30) days of your receipt of the replacement CRU. See your Lenovo Limited Warranty documentation for full details.

General guidelines When removing or replacing a FRU, be sure to observe the following general guidelines:

1. Do not try to service any computer unless you have been trained and certified. An untrained person runs the risk of damaging parts.

2. Before replacing any FRU, review Chapter 6 FRU replacement notices on page 41.

3. Begin by removing any FRUs that have to be removed before replacing the failing FRU. Any such FRUs are listed at the beginning of each FRU replacement procedure. Remove them in the order in which they are listed.

4. Follow the correct sequence in the steps for removing a FRU, as given in the drawings by the numbers in square callouts.

5. When turning a screw, turn it in the direction as given by the arrow in the drawing.

6. When removing a FRU, move it in the direction as given by the arrow in the drawing.

7. To put the new FRU in place, reverse the removal procedure and follow any notes that pertain to replacement.

8. When replacing a FRU, use the correct screw(s) as shown in the replacement procedures.

DANGER

Before removing any FRU, turn off the computer, unplug all power cords from electrical outlets, remove the battery pack, and then disconnect any interconnecting cables.

Attention: After replacing a FRU, do not turn on the computer until you have made sure that all screws, springs, and other small parts are in place and none are loose inside the computer. Verify this by shaking the computer gently and listening for rattling sounds. Metallic parts or metal flakes can cause electrical short circuits.

Attention: The system board is sensitive to, and can be damaged by, electrostatic discharge. Before touching it, establish personal grounding by touching a ground point with one hand or by using an electrostatic discharge (ESD) strap (P/N 6405959).

Copyright Lenovo 2012 43

1010 Battery pack

Removal steps of battery pack

DANGER

Use only the battery specified in the parts list for your computer. Any other battery could ignite or explode.

Unlock the manual battery latch 1 . Hold the spring-loaded battery latch in the unlocked position, and then remove the battery pack in the direction shown by the arrow 2 .

2

1

2

When installing: Install the battery pack in the slot. Ensure that the battery latches are in the locked position.

1020 Bottom slot cover For access, remove this FRU: 1010 Battery pack on page 44

Removal steps of bottom slot cover

Remove the screws 1 , and then remove the cover 2 .

1

1

2

2

44 Hardware Maintenance Manual

Step Screw (quantity) Color Torque

1 M2 3 mm, flat-head, nylon-coated (2) Black 1.6 kgf-cm

1030 Optical drive For access, remove these FRUs in order: 1010 Battery pack on page 44 1020 Bottom slot cover on page 44

Removal steps of optical drive

Remove the screw 1 .

1

Step Screw (quantity) Color Torque

1 M2 3 mm, flat-head, nylon-coated (1) Black 1.6 kgf-cm

Insert a screwdriver into the screw hole 2 and push the optical drive in the direction shown by the arrow 3 . Then remove the optical drive.

3 2

1040 Memory modules For access, remove these FRUs in order: 1010 Battery pack on page 44 1020 Bottom slot cover on page 44

Removal steps of memory modules

Release the two latches on both edges of the socket at the same time in the direction shown by the arrows 1 , and then unplug the memory module in the direction shown by the arrow 2 .

Chapter 7. Removing or replacing a FRU 45

1 1

2

Note: If only one memory module is to be installed on the computer you are servicing, the card must be installed in SLOT-0 ( a lower slot), but not in SLOT-1 ( b upper slot).

a

b

When installing: Insert the notched end of the memory module into the socket. Press the memory module firmly, and pivot it until it snaps into place. Ensure that it is firmly installed in the slot and does not move easily.

1050 Hard disk drive For access, remove these FRUs in order: 1010 Battery pack on page 44 1020 Bottom slot cover on page 44

Attention:

Do not drop the drive or apply any physical shock to it. The drive is sensitive to physical shock. Improper handling can cause damage and permanent loss of data.

Before removing the drive, have the user make a backup copy of all the information on it if possible.

Never remove the drive while the computer is operating or in suspend mode.

46 Hardware Maintenance Manual

Removal steps of hard disk drive assembly

Remove the screw 1 . Pull the tab in the direction shown by the arrow 2 .

1

2

Step Screw (quantity) Color Torque

1 M2 3 mm, flat-head, nylon-coated (1) Black 1.6 kgf-cm

Remove the hard disk drive from the slot in the direction shown by the arrow 3 .

3

When installing: Ensure that the hard disk drive connector is attached firmly.

Removal steps of hard disk drive bracket

Remove the screws 1 .

1

1

1

1

Step Screw (quantity) Color Torque

1 M3 4 mm, flat-head, nylon-coated (4) Black 3 kgf-cm

Chapter 7. Removing or replacing a FRU 47

Remove the hard disk drive bracket.

2

1060 PCI Express Mini Card for wireless LAN For access, remove these FRUs in order: 1010 Battery pack on page 44 1020 Bottom slot cover on page 44

Removal steps of PCI Express Mini Card for wireless LAN

Disconnect the cable from the card using the removal tool antenna RF connector (P/N: 08K7159) or pick up the cable with your fingers and then gently disconnect it from the card in the direction of the arrow 1 . Then remove the screw 2 .

2

1

1

Step Screw (quantity) Color Torque

2 M2 3 mm, flat-head, nylon-coated (1) Black 1.6 kgf-cm

48 Hardware Maintenance Manual

Remove the PCI Express Mini Card for wireless LAN in the direction shown by the arrow 3 .

3

When installing: Plug the black cable (MAIN) into the jack labeled A, and the white cable (AUX) into the jack labeled B on the card.

1070 mSATA solid-state drive For access, remove these FRUs in order: 1010 Battery pack on page 44 1020 Bottom slot cover on page 44

Attention:

Do not drop the drive or apply any physical shock to it. The drive is sensitive to physical shock. Improper handling can cause damage and permanent loss of data.

Before removing the drive, have the user make a backup copy of all the information on it if possible.

Never remove the drive while the computer is operating or in suspend mode.

Chapter 7. Removing or replacing a FRU 49

Removal steps of mSATA solid-state drive

Remove the screw 1 .

1

Step Screw (quantity) Color Torque

1 M2 3 mm, flat-head, nylon-coated (1) Black 1.6 kgf-cm

Remove the mSATA solid-state drive in the direction shown by the arrow 2 .

2

1080 Backup battery For access, remove these FRUs in order: 1010 Battery pack on page 44 1020 Bottom slot cover on page 44

50 Hardware Maintenance Manual

Removal steps of backup battery

DANGER

Use only the battery specified in the parts list for your computer. Any other battery could ignite or explode.

Detach the connector to remove the backup battery.

1

2

1090 Keyboard For access, remove these FRUs in order: 1010 Battery pack on page 44 1020 Bottom slot cover on page 44

Removal steps of keyboard

Remove the screws 1 .

1

1 1

When installing: Ensure the screws have been fastened to secure the keyboard.

Step Screw (quantity) Color Torque

1 M2.5 8 mm, flat-head, nylon-coated (3) Black 3.0 kgf-cm

Chapter 7. Removing or replacing a FRU 51

Push hard in the direction shown by the arrows 2 to unlatch the front edge of the keyboard.

2

2

Detach the keyboard lightly in the direction shown by the arrow 3 .

3

52 Hardware Maintenance Manual

Carefully lift the keyboard until you can see how it is connected 4 . Detach the keyboard connector.

3

4

5

6

1100 Keyboard bezel For access, remove these FRUs in order: 1010 Battery pack on page 44 1020 Bottom slot cover on page 44 1050 Hard disk drive on page 46 1090 Keyboard on page 51

Chapter 7. Removing or replacing a FRU 53

Removal steps of keyboard bezel

Remove screws 1 and 2 that secure the keyboard bezel.

1

1 1

1 1

1 1

1

1

1

1

2 2

2

Step Screw (quantity) Color Torque

1 M2.5 8 mm, flat-head, nylon-coated (11) Black 3.0 kgf-cm

2 M2 3 mm, flat-head, nylon-coated (3) Silver 1.6 kgf-cm

Remove the screw 3 .

3

Step Screw (quantity) Color Torque

3 M2 6 mm, flat-head, nylon-coated (1) Black 1.6 kgf-cm

54 Hardware Maintenance Manual

Detach the connectors.

7

6

9

8 4

5

When installing: Ensure that the connectors are attached firmly to the system board.

Remove the keyboard bezel.

10

10

10

10

10

10 10

10

10

11

1120 Fingerprint board and LED board For access, remove these FRUs in order: 1010 Battery pack on page 44 1020 Bottom slot cover on page 44

Chapter 7. Removing or replacing a FRU 55

1050 Hard disk drive on page 46 1090 Keyboard on page 51 1100 Keyboard bezel on page 53

Removal steps of fingerprint board

Remove the screw 1 and then remove the fingerprint board bracket 2 . Remove the fingerprint board 3 .

2

3

1

Step Screw (quantity) Color Torque

1 M2 2 mm, flat-head, nylon-coated (1) Silver 1.6 kgf-cm

56 Hardware Maintenance Manual

Removal steps of LED board

Peel off the mylar tape 1 . Then remove the LED board 2 .

1

2

1130 Power board For access, remove these FRUs in order: 1010 Battery pack on page 44 1020 Bottom slot cover on page 44 1050 Hard disk drive on page 46 1030 Optical drive on page 45 1040 Memory modules on page 45 1060 PCI Express Mini Card for wireless LAN on page 48 1080 Backup battery on page 50 1090 Keyboard on page 51 1100 Keyboard bezel on page 53

Chapter 7. Removing or replacing a FRU 57

Removal steps of power board

Remove the screw 1 and then remove the power board 2 .

2

1

Step Screw (quantity) Color Torque

1 M2 3 mm, flat-head, nylon-coated (1) Black 1.6 kgf-cm

1140 Microphone assembly For access, remove these FRUs in order: 1010 Battery pack on page 44 1020 Bottom slot cover on page 44 1050 Hard disk drive on page 46 1030 Optical drive on page 45 1040 Memory modules on page 45 1060 PCI Express Mini Card for wireless LAN on page 48 1080 Backup battery on page 50 1090 Keyboard on page 51 1100 Keyboard bezel on page 53

Removal steps of microphone assembly

Detach the connector, and then remove the microphone assembly.

58 Hardware Maintenance Manual

1 4

2 3

When installing: Ensure that the connector is attached firmly to the system board.

1150 I/O board For access, remove these FRUs in order: 1010 Battery pack on page 44 1020 Bottom slot cover on page 44 1050 Hard disk drive on page 46 1030 Optical drive on page 45 1040 Memory modules on page 45 1060 PCI Express Mini Card for wireless LAN on page 48 1080 Backup battery on page 50 1090 Keyboard on page 51 1100 Keyboard bezel on page 53

Chapter 7. Removing or replacing a FRU 59

Removal steps of I/O board

Remove the screws 1 , and then detach the cable.

11

3

2

Step Screw (quantity) Color Torque

1 M2 6 mm, flat-head, nylon-coated (2) Black 3.0 kgf-cm

When installing: Ensure that the cable is attached firmly to the system board.

60 Hardware Maintenance Manual

Remove the I/O board 4 .

4

1160 System board assembly and USB board Important notices for handling the system board

When handling the system board, bear the following in mind:

Be careful not to drop the system board on a bench top that has a hard surface, such as metal, wood, or composite.

Avoid rough handling of any kind.

At every point in the process, be sure not to drop or stack the system board.

If you put a system board down, be sure to put it only on a padded surface such as an ESD mat or a corrugated conductive surface.

For access, remove these FRUs in order: 1010 Battery pack on page 44 1020 Bottom slot cover on page 44 1050 Hard disk drive on page 46 1030 Optical drive on page 45 1040 Memory modules on page 45 1060 PCI Express Mini Card for wireless LAN on page 48 1080 Backup battery on page 50 1090 Keyboard on page 51 1100 Keyboard bezel on page 53

Chapter 7. Removing or replacing a FRU 61

Removal steps of system board

Remove the screws 1 .

1

1

1

Step Screw (quantity) Color Torque

1 M2 5 mm, flat-head, nylon-coated (3) Black 3.0 kgf-cm

Detach the connectors.

5

6

2

3

4

10

7

9

8

When installing: Ensure that all the connectors are attached firmly.

62 Hardware Maintenance Manual

Detach the connector 12 to remove the system board assembly.

9

8

11

12

Removal steps of USB board

Detach the connector.

1

2

When installing: Ensure that all the connectors are attached firmly.

Chapter 7. Removing or replacing a FRU 63

Remove the USB board.

3

1170 Thermal fan assembly For access, remove these FRUs in order: 1010 Battery pack on page 44 1020 Bottom slot cover on page 44 1050 Hard disk drive on page 46 1030 Optical drive on page 45 1040 Memory modules on page 45 1060 PCI Express Mini Card for wireless LAN on page 48 1080 Backup battery on page 50 1090 Keyboard on page 51 1100 Keyboard bezel on page 53 1160 System board assembly and USB board on page 61

Removal steps of thermal fan assembly

Detach the connector in the direction shown by the arrow 1 .

1

When installing: Ensure that the connector is attached firmly.

64 Hardware Maintenance Manual

Loosen the screws 2 to 8 , but do not remove them.

3 4

5

2

7

6

8

Lift the thermal fan assembly in the direction shown by the arrow 9 .

Attention: Be careful not to damage the connector.

9

Attention: Do not handle the thermal fan assembly roughly. Improper handling can cause distortion or deformation and imperfect contact with components.

Chapter 7. Removing or replacing a FRU 65

When installing: Before you attach the thermal fan assembly to the computer, apply thermal grease, at an amount of 0.2 grams, on the part marked a and b as shown in the following illustration. Either too much or too less application of grease can cause a thermal problem due to imperfect contact with a component.

b

a

1180 Microprocessor For access, remove these FRUs in order: 1010 Battery pack on page 44 1020 Bottom slot cover on page 44 1050 Hard disk drive on page 46 1030 Optical drive on page 45 1040 Memory modules on page 45 1060 PCI Express Mini Card for wireless LAN on page 48 1080 Backup battery on page 50 1090 Keyboard on page 51 1100 Keyboard bezel on page 53 1160 System board assembly and USB board on page 61 1170 Thermal fan assembly on page 64

Attention: The microprocessor is extremely sensitive. When you service the microprocessor, avoid any kind of rough handling.

66 Hardware Maintenance Manual

Removal steps of microprocessor

Rotate the head of the screw in the direction shown by the arrow 1 to release the lock, then remove the microprocessor 2 .

2

a

b

1

When installing: Place the microprocessor above the microprocessor socket a , and then rotate the head of the screw in the direction shown by the arrow b to secure the microprocessor.

1190 LCD unit For access, remove these FRUs in order: 1010 Battery pack on page 44 1020 Bottom slot cover on page 44 1050 Hard disk drive on page 46 1030 Optical drive on page 45 1040 Memory modules on page 45 1060 PCI Express Mini Card for wireless LAN on page 48 1080 Backup battery on page 50 1090 Keyboard on page 51 1100 Keyboard bezel on page 53 1160 System board assembly and USB board on page 61

Chapter 7. Removing or replacing a FRU 67

Removal steps of LCD unit

Release the antenna cables from the cable guides. Then remove the screws 1 .

1

1 1

1

Step Screw (quantity) Color Torque

1 M2.5 6 mm, flat-head, nylon-coated (4) Silver 1.6 kgf-cm

When installing:

Route the antenna cables along the cable guides. As you route the cables, ensure that they are not subject to any tension. Tension could cause the cables to be damaged by the cable guides, or a wire to be broken.

Ensure that the LCD connector is attached firmly and ensure that you do not pinch the antenna cables when you attach the LCD assembly. Route the LCD cable along the cable guides.

68 Hardware Maintenance Manual

Remove the LCD unit in the direction shown by the arrow 2 .

2

1200 Speaker assembly For access, remove these FRUs in order: 1010 Battery pack on page 44 1020 Bottom slot cover on page 44 1050 Hard disk drive on page 46 1030 Optical drive on page 45 1040 Memory modules on page 45 1060 PCI Express Mini Card for wireless LAN on page 48 1080 Backup battery on page 50 1090 Keyboard on page 51 1100 Keyboard bezel on page 53 1160 System board assembly and USB board on page 61 1190 LCD unit on page 67

Chapter 7. Removing or replacing a FRU 69

Removal steps of speaker assembly

Remove the screws 1 . Then remove the speaker assembly 2 .

2

2

1

1

1

1

Step Screw (quantity) Color Torque

1 M2.5 5.7 mm, flat-head, nylon-coated (4) Black 1.6 kgf-cm

1210 DC-in sub card and base cover For access, remove these FRUs in order: 1010 Battery pack on page 44 1020 Bottom slot cover on page 44 1050 Hard disk drive on page 46 1030 Optical drive on page 45 1040 Memory modules on page 45 1060 PCI Express Mini Card for wireless LAN on page 48 1080 Backup battery on page 50 1090 Keyboard on page 51 1100 Keyboard bezel on page 53 1160 System board assembly and USB board on page 61 1190 LCD unit on page 67

Removal steps of DC-in sub card

Remove the screws 1 , and then remove the DC-in sub card in the direction shown by the arrow 2 .

2

1 1

Step Screw (quantity) Color Torque

1 M2 3 mm, flat-head, nylon-coated (2) Black 1.6 kgf-cm

70 Hardware Maintenance Manual

Applying labels to the base cover

The new base cover is shipped with a kit containing labels of several kinds. Apply those labels listed when you replace the base cover. For the labels which are not shipped with the new base cover, peel them off from the old base cover, and adhere them to the new one.

Note: If you replace a part with the Windows Certificate of Authentication (COA) label 12 , return the old part with the label attached to the customer. Otherwise, you can provide the customer with a letter, stating the original location of the label on the computer and the information on the label, such as the part number, serial number, and product key.

The following illustration shows the label locations on the base cover.

7

8 9

10

6

1

2

4

3

5

11

12

13

14

1 Indonesia D side label 8 Israel label

2 WWAN IMEI barcode label 9 Israel label

3 Brazil Bluetooth label or Bluetooth label for United States/Canada/Taiwan

10 Malaysia SIRIM label

4 China label, KCC label, or MAC label 11 Vodafone label

5 Brazil wireless LAN label or wireless LAN label for United States/Canada/Taiwan

13 Rating label

6 PPT label 14 Rating label

7 Indonesia WLAN and Bluetooth label

2010 LCD front bezel For access, remove these FRUs in order: 1010 Battery pack on page 44

Chapter 7. Removing or replacing a FRU 71

1020 Bottom slot cover on page 44 1050 Hard disk drive on page 46 1030 Optical drive on page 45 1040 Memory modules on page 45 1060 PCI Express Mini Card for wireless LAN on page 48 1080 Backup battery on page 50 1090 Keyboard on page 51 1100 Keyboard bezel on page 53 1160 System board assembly and USB board on page 61 1190 LCD unit on page 67

Removal steps of LCD front bezel

Remove the screws 1 .

1

1

Step Screw (quantity) Color Torque

1 M2 3.5 mm, flat-head, nylon-coated (2) Black 1.6 kgf-cm

72 Hardware Maintenance Manual

Remove the LCD front bezel in the direction shown by the arrows 2 .

2

2

2

2

When installing: Ensure that all the latches are attached firmly. Then secure the bezel with the screws.

2020 Integrated camera For access, remove these FRUs in order: 1010 Battery pack on page 44 1090 Keyboard on page 51 1100 Keyboard bezel on page 53 1160 System board assembly and USB board on page 61 1190 LCD unit on page 67 2010 LCD front bezel on page 71

Chapter 7. Removing or replacing a FRU 73

Removal steps of integrated camera

Remove the integrated camera from the LCD cover as shown in the following illustration.

Note: The integrated camera is stuck on the top center of the LCD cover.

1 2

When installing: Stick the integrated camera to the top center of the LCD cover and adjust the placement to ensure that the connector is attached firmly.

2030 LCD panel, LCD cable, and hinges For access, remove these FRUs in order: 1010 Battery pack on page 44 1020 Bottom slot cover on page 44 1090 Keyboard on page 51 1100 Keyboard bezel on page 53 1160 System board assembly and USB board on page 61 1190 LCD unit on page 67 2010 LCD front bezel on page 71

74 Hardware Maintenance Manual

Removal steps of LCD panel and LCD cable

Remove the screws 1 . Then remove the LCD panel in the direction shown by the arrow 2 .

1

1

1

1

2

Step Screw (quantity) Color Torque

1 M2 3.5 mm, flat-head, nylon-coated (4) White 1.6 kgf-cm

Turn over the LCD panel. Then detach the LCD cable as shown in the following illustration.

3

4

When installing: Ensure that the connector is attached firmly.

Chapter 7. Removing or replacing a FRU 75

Removal steps of hinges

Remove the screws 1 . Then remove the hinges 2 .

1

1

2

2

1

1

Step Screw (quantity) Color Torque

1 M2 3.5 mm, flat-head, nylon-coated (4) White 1.6 kgf-cm

2040 Antenna assembly For access, remove these FRUs in order: 1010 Battery pack on page 44 1020 Bottom slot cover on page 44 1090 Keyboard on page 51 1100 Keyboard bezel on page 53 1160 System board assembly and USB board on page 61 1190 LCD unit on page 67 2010 LCD front bezel on page 71 2030 LCD panel, LCD cable, and hinges on page 74

Removal steps of antenna assembly

Detach the antennas in the direction shown by the arrows 1 .

1

1

76 Hardware Maintenance Manual

Cable routing: Route the antenna cables along the cable guides and secure the antenna boards with tape. As you route the cables, ensure that they are not subject to any tension. Tension could cause the cables to be damaged by the cable guides, or a wire to be broken.

Chapter 7. Removing or replacing a FRU 77

78 Hardware Maintenance Manual

Chapter 8. Locations

This chapter introduces the locations of the computer hardware components.

Front view

2

1

2

15

14

4

4

11

10

5 6

7

8 9

13

12

3

Figure 1. Lenovo V480 and V480c front view

1 Integrated camera (on some models) 9 Combo audio jack

2 Wireless antennas (on some models) 10 Fingerprint reader (on some models)

3 Status indicators1 11 Media card reader slot

4 Speakers 12 Touch pad

5 ac power connector 13 Power and battery status indicator

6 USB connector 14 Power button

7 Optical drive 15 Recovery button

8 USB connector

1 For the description of the indicators, see Status indicators on page 38.

Copyright Lenovo 2012 79

Bottom view

4 5

678

10

9

1 2

3

Figure 2. Lenovo V480 and V480c bottom view

1 Battery latch (manual) 6 Monitor connector

2 Battery pack 7 Ethernet connector

3 Battery latch (spring-loaded) 8 HDMI port

4 Security keyhole 9 USB 3.0 connectors

5 Fan louvers 10 Bottom slot cover1

1 The memory modules, hard disk drive, and wireless cards are located underneath the bottom slot cover.

80 Hardware Maintenance Manual

Chapter 9. Parts list

This chapter contains the following lists of the service parts. Overall on page 82 LCD FRUs on page 88 Keyboard on page 91 Miscellaneous parts on page 98 ac power adapters on page 99 Power cords on page 100

Notes: Each FRU is available for all types or models, unless otherwise specified. A CRU is identified by a single asterisk (*) or two asterisks (**) in the CRU ID column. An N in the CRU ID column

means that the part is not a CRU. A single asterisk (*) means that the part is a self-service CRU; two asterisks (**) means that the part is an optional-service CRU.

CRU statement for customers: You can resolve some problems with your product with a replacement part you can install yourself, called a Customer Replaceable Unit or CRU. Some CRUs are designated as self-service CRUs and others are designated as optional-service CRUs. Installation of self-service CRUs is your responsibility. For optional-service CRUs, you can either install the CRU yourself or you can request that a Service Provider install the CRU according to the warranty service for your product. If you intend on installing the CRU, Lenovo will ship the CRU to you. CRU information and replacement instructions are shipped with your product and are available from Lenovo at any time upon request. You can find a list of CRUs for your product in this Hardware Maintenance Manual. An electronic version of this manual can be found at http://www.lenovo.com/UserManuals. Follow the on-screen instructions to find the manual for your product. You might be required to return the defective CRU. When return is required: (1) return instructions, a prepaid shipping label, and a container will be included with the replacement CRU; and (2) you might be charged for the replacement CRU if Lenovo does not receive the defective CRU within thirty (30) days of your receipt of the replacement CRU. See your Lenovo Limited Warranty documentation for full details.

Lenovo computers contain the following types of CRUs: Self-service CRUs: These CRUs unplug or are held by no more than two screws. Examples of these types

of CRUs include the ac power adapter, power cord, battery, and hard disk drive. Other self-service CRUs depending on product design might include the memory module, wireless card, keyboard, and palm rest with finger print reader and touch pad.

Optional-service CRUs: These CRUs are isolated parts within the computer that are concealed by an access panel that is typically secured by more than two screws. Once the access panel is removed, the specific CRU is visible.

Copyright Lenovo 2012 81

Overall

Lenovo V480

1

2

3

5

4

6

7

10

c

9

b

8

11

d

12

13

14

15

e

17

18

21

22

f

g

24

a

20

19

16

23

Table 3. Parts listOverall

No. FRU (Overall) FRU no. CRU ID

Miscellaneous parts (see Miscellaneous parts on page 98)

1 LCD unit (see LCD FRUs on page 88)

82 Hardware Maintenance Manual

Table 3. Parts listOverall (continued)

No. FRU (Overall) FRU no. CRU ID

2 LA48 Upper Case Silvery 60.4TD03.001 90200525 N

2 LA48 Upper Case Red 60.4TD21.001 90200526 N

3 LA48 LED Board W/Cable 50.4TD09.031 90200516 N

4 LA48 FP Board W/Cable 55.4TD02.001G 90200594 N

5 LA48 Thermal Module DIS W/FAN 90200532 N

6 LA48 USB Board W/Cable 55.4TD03.001G 90200573 N

7 Battery, 6CELL 2.2Ah, Sanyo 2.2Ah 48Wh 6cell battey 121500047 *

7 Battery, 6CELL 2.2Ah, Sony 2.2Ah 48Wh 6cell battey 121500048 *

7 Battery, 6CELL 2.2Ah, LG 2.2Ah 48Wh 6cell battey 121500049 *

7 Battery, 6CELL 2.2Ah, SMP 2.2Ah 48Wh 6cell battey 121500050 *

7 Battery, 6CELL 2.8Ah, LG L11L6F01 3S2P 62Wh Batt C01 Origa 121500052 *

7 Battery, 6CELL 2.8Ah, SM/S L11M6F01 3S2P 62Wh Batt C01 Origa 121500053 *

8 LA48 DC IN LENS 60.4TD25.001 90200533 N

9 LA48 Speaker R 23.40A3A.001 90200535 N

10 LA48 Lower Case 60.4TD04.001 90200529 N

11 ODD, 12.7mm Tray-in Rambo, PLDS, DS-8A8SH 25201487 *

11 ODD, 12.7mm Tray-in Rambo, Sony Optiarc, AD-7740H 25201106 *

11 ODD, 12.7mm Tray-in Rambo, HLDS, GT50N 25201635 *

12 WLAN, Non-Intel 1x1 11bgn + BT4.0 Combo, Broadcom 4313 + 20702 20200100 20200101

*

12 WLAN, Non-Intel 2x2 11abgn + BT4.0 Combo, Broadcom 43228 + 20702 20200098 20200099

*

12 WLAN, Intel 2x2 11bgn + BT4.0 Combo, Jackson Peak 1 20200078 *

12 WLAN, Non-Intel 1x1 11bgn, Broadcom BCM4313 1*1 BGN MOW 20200102 *

12 WLAN, Non-Intel 1x1 11bgn, Realtek bgn 1x1 HMC WLAN Stockton 20200016 *

13 SSD, mSATA 16G, Sandisk, U100 mSATA SDSA5DK-016G 16200215 N

13 SSD, mSATA 16G, Lite-on, LMT-16M3M 16200241 N

14 LA48 IO Board W/Cable 55.4TD04.001G 90200593 N

15 LA48 Memory Door 60.4TD08.001 90200528 N

16 HDD, 320G 5400rpm, Toshiba Capricorn BS (H6sp), Toshiba MK3265GSX 5400RPM 320G 16200097 **

16 HDD, 320G 5400rpm, HGST Jaquar B7, HGST HTS545032A7E380 5400PRM7mm 320G 16200068 **

16 HDD, 320G 5400rpm, Seagate Sapta 15, Seagate ST320LT020 5400RPM 7MM 320G 16005211 **

16 HDD, 500G 5400rpm, WD ML500M, WD5000BPVT-08A1Y 16200118 **

16 HDD, 500G 5400rpm, WD ML375M, WD5000BPVT-08HXZ 16200090 **

16 HDD, 500G 5400rpm, Toshiba Capricorn BS (H6sp), Toshiba MK5065GSX 5400RPM 500G 16200098 **

16 HDD, 500G 5400rpm, HGST Jaquar B7, HGST HTS545050A7E380 5400PRM7mm 500G 16200067 **

16 HDD, 750G 5400rpm, WD ML500M, WD7500BPVT-08A1Y 16200119 **

16 HDD, 750G 5400rpm, WD ML375M, WD7500BPVT-08HXZ 16200121 **

Chapter 9. Parts list 83

Table 3. Parts listOverall (continued)

No. FRU (Overall) FRU no. CRU ID

16 HDD, 750G 5400rpm, HGST Jaguar B, HTS541075A9E680 16200192 **

16 HDD, 1TB 5400rpm, WD ML500M, WD10JPVT-08A1Y 16200120 **

16 HDD, 1TB 5400rpm, HGST Jaquar B, HTS541010A9E680 16200193 **

16 HDD, 320G 7200rpm, WD MX320S-1, WD3200BEKT-08PVM 16200092 **

16 HDD, 320G 7200rpm, Toshiba Capricorn CS (H6sp), TSB MK3261GSY 7200PRM 9.5mm 320G HDD

16200099 **

16 HDD, 320G 7200rpm, HGST Jaquar C7, HTS725032A7E630 16200194 **

16 HDD, 320G 7200rpm, Seagate Julius 1 4K, Seagate ST320LT007 7200RPM 7MM 320G 16005030 **

16 HDD, 500G 7200rpm, WD MX375M, WD5000BPKT-08PK4T 16200124 **

16 HDD, 500G 7200rpm, Toshiba Capricorn CS (H6sp), TSB MK5061GSY 7200PRM 9.5mm 500G HDD

16200100 **

16 HDD, 500G 7200rpm, Jaguar C7, HTS725050A7E630 16200195 **

17 LA48 Speaker L 23.40A3A.001 90200536 N

18 Memory module, DDRIII 1600 2GB, Samsung, M471B5773DH0-CK0 DDR3 1600 2GB 11200340 *

18 Memory module, DDRIII 1600 2GB, Hynix, HMT325S6CFR8C-PB DDR3 1600 2GB 11200343 *

18 Memory module, DDRIII 1600 2GB, Micron, MT8KTF25664HZ-1G6M1 DDR3 1600 2GB 11200346 *

18 Memory module, DDRIII 1600 2GB, Ramaxel, RMT3150ED58E8W-1600 DDR3 1600 2GB 11200392 *

18 Memory module, DDRIII 1600 2GB, Sharetronic(Micron), SM321NH08IAF DDR3 1600 2GB 11200396 *

18 Memory module, DDRIII 1600 4GB, Samsung, M471B5273DH0-CK0 DDR3 1600 4GB 11200341 *

18 Memory module, DDRIII 1600 4GB, Hynix, HMT351S6CFR8C-PB DDR3 1600 4GB 11200344 *

18 Memory module, DDRIII 1600 4GB, Micron, MT16KTF51264HZ-1G6M1 DDR3 1600 4GB 11200347 *

18 Memory module, DDRIII 1600 4GB, Ramaxel, RMT3160ED58E9W-1600 DDR3 1600 4GB 11200393 *

18 Memory module, DDRIII 1600 4GB, Sharetronic(Micron), SM322NQ08IAF DDR3 1600 4GB 11200397 *

19 LA48 Microphone 23.42383.001 90200534 N

20 LA48 MB DIS N13P-GL 1G WO/3G W/HDMI 90000130 N

21 Microprocessor, Intel I5-2520M 2.5G 3M 2c J1 PGA processor 102001067 N

21 Microprocessor, Intel I3-2370M 2.4G J1 3M 2cPGA processor 102500228 N

21 Microprocessor, Intel SNB I3-2350M 2.3G 3M J1 PGA processor 102500018 N

21 Microprocessor, Intel SNB I3-2330M 2.2G 3M J1 PGA processor 102500017 N

21 Microprocessor, Intel SNB I3-2310M 2.1G 3M 2c J1 PGA processor 102001065 N

21 Microprocessor, Intel I7-3520M 2.9G L0 4M 2cPGA QS processor 102500295 N

21 Microprocessor, Intel I5-3320M 2.6G L0 3M 2cPGA QS processor 102500299 N

21 Microprocessor, Intel I5-3210M 2.5G L0 3M 2cPGA QS processor 102500301 N

21 Microprocessor, Intel I3-3110M 2.4G L0 3M 2cPGA QS processor 102500303 N

21 Microprocessor, Intel I7-3612QM 2.1G E1 6M 4cPGA CPU processor 102500290 N

22 LA48 Touch Pad Silvery 6M.4TDBD.001 90200575 N

22 LA48 Touch Pad Red 6M.4TDBD.002 90200576 N

84 Hardware Maintenance Manual

Table 3. Parts listOverall (continued)

No. FRU (Overall) FRU no. CRU ID

23 LA48 Power Board 55.4TD05.001G 90200574 N

24 Keyboard (see Keyboard on page 91)

ac power adapter (see ac power adapters on page 99)

Lenovo V480c

1

2

3

a

4

6

7

10

d

9

8

11

e

12

13

14

15

f

17

18

21

23

b

20

19

16

22

5

6

7

8

c

e

d

9

10

11

12

13

4

5

6

7

8

19

Chapter 9. Parts list 85

Table 4. Parts listOverall

No. FRU (Overall) FRU no. CRU ID

Miscellaneous parts (see Miscellaneous parts on page 98)

1 LCD unit (see LCD FRUs on page 88)

2 LB48 Upper Case W/TP 6M.4TFCS.001 90200759 N

3 LB48 LED Cable 50.4TF03.001 90000223 N

4 LA48C FigerPrint Board W/Cable 90000562 N

5 LA48C USB Board W/Cable 90000563 N

7 Battery, 6CELL 2.2Ah, Sanyo 2.2Ah 48Wh 6cell battey 121500047 *

7 Battery, 6CELL 2.2Ah, LG 2.2Ah 48Wh 6cell battey 121500049 *

7 Battery, 6CELL 2.2Ah, SMP 2.2Ah 48Wh 6cell battey 121500050 *

7 Battery, 6CELL 2.8Ah, SA L11S6F01 3S2P 62Wh Batt C01 Origa 121500051 *

7 Battery, 6CELL 2.8Ah, LG L11L6F01 3S2P 62Wh Batt C01 Origa 121500052 *

7 Battery, 6CELL 2.8Ah, SM/S L11M6F01 3S2P 62Wh Batt C01 Origa 121500053 *

7 LA48 DC IN LENS 60.4TD25.001 90200533 N

8 LA48 Speaker R 23.40A3A.001 90200535 N

9 LA48 Lower Case 60.4TD04.001 90200529 N

10 ODD, 12.7mm Tray-in Rambo, PLDS, DS-8A8SH 25201487 *

10 ODD, 12.7mm Tray-in Rambo, Sony Optiarc, AD-7740H 25201106 *

10 ODD, 12.7mm Tray-in Rambo, HLDS, GT50N 25201635 *

11 WLAN, Non-Intel 1x1 11bgn + BT4.0 Combo, Broadcom 4313 + 20702 20200100 20200101

*

11 WLAN, Non-Intel 2x2 11abgn + BT4.0 Combo, Broadcom 43228 + 20702 20200098 20200099

*

11 WLAN, Intel 2x2 11bgn + BT4.0 Combo, Jackson Peak 1 20200078 *

11 WLAN, Non-Intel 1x1 11bgn, Broadcom BCM4313 1*1 BGN MOW 20200102 *

11 WLAN, Non-Intel 1x1 11bgn, Realtek bgn 1x1 HMC WLAN Stockton 20200016 *

12 SSD, mSATA 16G, Sandisk, U100 mSATA SDSA5DK-016G 16200215 N

13 LA48C CardReader Board W/Cable 90000564 N

14 LA48 Memory Door 60.4TD08.001 90200528 N

15 HDD, 320G 5400rpm, Toshiba Capricorn BS (H6sp), Toshiba MK3265GSX 5400RPM 320G 16200097 **

16 HDD, 320G 5400rpm, HGST Jaquar B7, HGST HTS545032A7E380 5400PRM7mm 320G 16200068 **

16 HDD, 320G 5400rpm, Seagate Sapta 15, Seagate ST320LT020 5400RPM 7MM 320G 16005211 **

16 HDD, 500G 5400rpm, WD ML500M, WD5000BPVT-08A1Y 16200118 **

16 HDD, 500G 5400rpm, WD ML375M, WD5000BPVT-08HXZ 16200090 **

16 HDD, 500G 5400rpm, Toshiba Capricorn BS (H6sp), Toshiba MK5065GSX 5400RPM 500G 16200098 **

16 HDD, 500G 5400rpm, HGST Jaquar B7, HGST HTS545050A7E380 5400PRM7mm 500G 16200067 **

16 HDD, 750G 5400rpm, WD ML500M, WD7500BPVT-08A1Y 16200119 **

16 HDD, 750G 5400rpm, WD ML375M, WD7500BPVT-08HXZ 16200121 **

16 HDD, 750G 5400rpm, HGST Jaguar B, HTS541075A9E680 16200192 **

86 Hardware Maintenance Manual

Table 4. Parts listOverall (continued)

No. FRU (Overall) FRU no. CRU ID

16 HDD, 1TB 5400rpm, WD ML500M, WD10JPVT-08A1Y 16200120 **

16 HDD, 1TB 5400rpm, HGST Jaquar B, HTS541010A9E680 16200193 **

16 HDD, 320G 7200rpm, WD MX320S-1, WD3200BEKT-08PVM 16200092 **

16 HDD, 320G 7200rpm, Toshiba Capricorn CS (H6sp), TSB MK3261GSY 7200PRM 9.5mm 320G HDD

16200099 **

16 HDD, 320G 7200rpm, HGST Jaquar C7, HTS725032A7E630 16200194 **

16 HDD, 320G 7200rpm, Seagate Julius 1 4K, Seagate ST320LT007 7200RPM 7MM 320G 16005030 **

16 HDD, 500G 7200rpm, WD MX375M, WD5000BPKT-08PK4T 16200124 **

16 HDD, 500G 7200rpm, Toshiba Capricorn CS (H6sp), TSB MK5061GSY 7200PRM 9.5mm 500G HDD

16200100 **

16 HDD, 500G 7200rpm, Jaguar C7, HTS725050A7E630 16200195 **

16 LA48 Speaker L 23.40A3A.001 90200536 N

17 Memory module, DDRIII 1600 2GB, Samsung, M471B5773DH0-CK0 DDR3 1600 2GB 11200340 *

18 Memory module, DDRIII 1600 2GB, Hynix, HMT325S6CFR8C-PB DDR3 1600 2GB 11200343 *

18 Memory module, DDRIII 1600 2GB, Micron, MT8KTF25664HZ-1G6M1 DDR3 1600 2GB 11200346 *

18 Memory module, DDRIII 1600 2GB, Ramaxel, RMT3150ED58E8W-1600 DDR3 1600 2GB 11200392 *

18 Memory module, DDRIII 1600 2GB, Sharetronic(Micron), SM321NH08IAF DDR3 1600 2GB 11200396 *

18 Memory module, DDRIII 1600 4GB, Samsung, M471B5273DH0-CK0 DDR3 1600 4GB 11200341 *

18 Memory module, DDRIII 1600 4GB, Hynix, HMT351S6CFR8C-PB DDR3 1600 4GB 11200344 *

18 Memory module, DDRIII 1600 4GB, Micron, MT16KTF51264HZ-1G6M1 DDR3 1600 4GB 11200347 *

18 Memory module, DDRIII 1600 4GB, Ramaxel, RMT3160ED58E9W-1600 DDR3 1600 4GB 11200393 *

18 Memory module, DDRIII 1600 4GB, Sharetronic(Micron), SM322NQ08IAF DDR3 1600 4GB 11200397 *

18 LB48 Micphone 23.42384.001 90200766 N

19 Microprocessor, Intel SNB I3-2350M 2.3G 3M J1 PGA processor 102500018 N

19 Microprocessor, Intel SNB I3-2330M 2.2G 3M J1 PGA processor 102500017 N

19 Microprocessor, Intel SNB B950 2.1G 2M Q0 PGA processor 102500016 N

19 Microprocessor, Intel Intel I3-2310M 2.1G 3M 2c J1 PGA processor 102001065 N

19 Microprocessor, Intel SNB B960 2.2G 2M 35W PGA processor 102500133 N

19 Microprocessor, Intel I3-2370M 2.4G J1 3M 2cPGA processor 102500228 N

19 Microprocessor, Intel I5-2520M 2.5G 3M 2c J1 PGA processor 102001067 N

19 Microprocessor, Intel B970 2.3G D2 2M 2cPGA processor 102500230 N

19 Microprocessor, Intel SNB B940 2.0G 2M Q0 PGA processor 102500015 N

19 Microprocessor, Intel B815 1.6G Q0 2M 2cPGA processor 102500229 N

19 Microprocessor, Intel SNB B800 1.5G Q0 2M 2c PGA processor 102500101 N

19 Microprocessor, Intel I3-2308M 2.1G Q0 3M 2cPGA processor 102500351 N

19 Microprocessor, Intel B820 1.7G Q0 2M 2cPGA processor 102500350 N

19 Microprocessor, Intel I5-3210M 2.5G L1 3M 2cPGA processor 102500301 N

19 Microprocessor, Intel I3-3110M 2.3G L1 3M 2cPGA processor 102500303 N

Chapter 9. Parts list 87

Table 4. Parts listOverall (continued)

No. FRU (Overall) FRU no. CRU ID

20 LA48C MB UMA W/HDMI WO/3G/BT 90000566 N

20 LA48C MB DIS N13M-GE1 1G W/HDMI WO/3G/BT 90000567 N

20 LA48C MB DIS N13P-GL 1G W/HDMI WO/3G/BT 90000568 N

21 LA48 Thermal Module DIS W/FAN 90200532 N

21 LA48 Thermal Module UMA W/FAN 90200765 N

22 LA48C Power Board 90000565 N

23 Keyboard (see Keyboard on page 91)

ac power adapter (see ac power adapters on page 99)

LCD FRUs A 14-inch high-definition (HD) TFT LCD is used in Lenovo V480 and V480c models.

Lenovo V480

88 Hardware Maintenance Manual

h

7

1

2

3

4

5

6

Table 5. Parts list - LCD

No. FRU FRU no. CRU ID

Miscellaneous parts (see Miscellaneous parts on page 98)

1 LA48 LCD Bezel 60.4TD02.001 90200522 N

2 LA48 Hinge R+L 6K.4TDCS.001 90200521 N

3 LA48 Camera 1M56.18011.462/07.962/06.362 90200517 N

4 LA48 Antenna R 25.90AAJ.001 90200530 N

5 LA48 LCD Cover Silvery 60.4TD01.001 90200523 N

5 LA48 LCD Cover Red 60.4TD20.001 90200524 N

6 LA48 Antenna L 25.90AAI.001 90200531 N

7 Panel, 14.0 HD Flat Glossy, AUO, B140XW03 V0 18003943 N

7 Panel, 14.0 HD Flat Glossy, AUO, B140XTN03.0 9A 18200625 N

7 Panel, 14.0 HD Flat Glossy, LGD, LP140WH2-TLE2 18200152 N

7 Panel, 14.0 HD Flat Glossy, SEC, LTN140AT20-L01 18004803 N

Chapter 9. Parts list 89

Lenovo V480c

1

3

f

2

34

35

f

f7

f6

Table 6. Parts list - LCD

No. FRU FRU No. CRU ID

Miscellaneous parts (see Miscellaneous parts on page 98)

1 LA48C LCD Bezel W/Camera Hole 90201342 N

2 LA48 Hinge R+L 6K.4TDCS.001 90200521 N

3 LA48 Camera 1M56.18011.462/07.962/06.362 90200517 N

4 LA48 Antenna R 25.90AAJ.001 90200530 N

5 LA48C LCD Cover WO/Antenna 90201341 N

6 LA48 Antenna L 25.90AAI.001 90200531 N

7 Panel, 14.0 HD Flat Glossy, AUO, B140XW03 V0 18003943 N

7 Panel, 14.0 HD Flat Glossy, LGD, LP140WH2-TLE2 18200152 N

7 Panel, 14.0 HD Flat Glossy, SEC, LTN140AT20-L01 18004803 N

90 Hardware Maintenance Manual

Keyboard

Lenovo V480

Table 7. Parts list - Keyboard (Dafon)

Language FRU NO. (Windows 7)

FRU NO. (Windows 8 )

CRU ID

Arabic 25204266 25204356

25209436 25209526

N

Belgian 25204274 25204364

25209444 25209534

N

Brazilian Portuguese 25204267 25204357

25209437 25209527

N

Bulgarian 25204280 25204370

25209450 25209540

N

French, English 25204260 25204350

25209520 25209430

N

Czech, Slovak 25204279 25204369

25209449 25209539

N

C& Nordics 25204273 25204363

25209443 25209533

N

Dutch 25204269 25204359

25209439 25209529

N

French 25204264 25204354

25209434 25209524

N

German 25204265 25204355

25209435 25209525

N

Greek 25204270 25204360

25209440 25209530

N

Hebrew 25204271 25204361

25209441 25209531

N

Hungarian 25204272 25204362

25209532 25209442

N

Icelandic 25204275 25204365

25209445 25209535

N

Indian 25204281 25204371

25209451 25209541

N

Italian 25204254 25204344

25209514 25209424

N

Japanese 25204268 25204358

25209438 25209528

N

Korean 25204261 25204351

25209521 25209431

N

Latin 25204259 25204349

25209429 25209519

N

Portuguese 25204258 25204348

25209428 25209518

N

Chapter 9. Parts list 91

Table 7. Parts list - Keyboard (Dafon) (continued)

Language FRU NO. (Windows 7)

FRU NO. (Windows 8 )

CRU ID

Russian 25204263 25204353

25209523 25209433

N

Slovenian 25204276 25204366

25209446 25209536

N

Swiss 25204277 25204367

25209537 25209447

N

Spanish 25204255 25204345

25209425 25209515

N

Thai 25204257 25204347

25209517 25209427

N

Traditional Chinese 25204262 25204352

25209432 25209522

N

Turkish 25204256 25204346

25209516 25209426

N

U.K. English 25204253 25204343

25209423 25209513

N

U.S. English 25204252 25204342

25209512 25209422

N

U.S. English (International, with a Euro symbol) 25204278 25204368

25209448 25209538

N

Table 8. Parts list - Keyboard (Sunrex)

Language FRU NO. (Windows 7)

FRU NO. (Windows 8)

CRU ID

Arabic 25204237 25204327

25209466 25209556

N

Belgian 25204244 25204334

25209474 25209564

N

Brazilian Portuguese 25204238 25204328

25209467 25209557

N

Bulgarian 25204250 25204340

25209480 25209570

N

Czech, Slovak 25204249 25204339

25209479 25209569

N

C& Nordics 25204243 25204333

25209473 25209563

N

Dutch 25204239 25204329

25209469 25209559

N

French 25204235 25204325

25209464 25209554

N

French, English 25204231 25204321

25209460 25209550

N

German 25204236 25204326

25209465 25209555

N

92 Hardware Maintenance Manual

Table 8. Parts list - Keyboard (Sunrex) (continued)

Language FRU NO. (Windows 7)

FRU NO. (Windows 8)

CRU ID

Greek 25204240 25204330

25209470 25209560

N

Hebrew 25204241 25204331

25209471 25209561

N

Hungarian 25204242 25204332

25209472 25209562

N

Icelandic 25204245 25204335

25209475 25209565

N

Indian 25204251 25204341

25209481 25209571

N

Italian 25204225 25204315

25209454 25209544

N

Japanese 25204224 25204314

25209468 25209558

N

Korean 25204232 25204322

25209461 25209551

N

Latin 25204230 25204320

25209459 25209549

N

Portuguese 25204229 25204319

25209458 25209548

N

Russian 25204234 25204324

25209463 25209553

N

Swiss 25204247 25204337

25209477 25209567

N

Spanish 25204226 25204316

25209455 25209545

N

Slovenian 25204246 25204336

25209476 25209566

N

Thai 25204228 25204318

25209457 25209547

N

Traditional Chinese 25204233 25204323

25209462 25209552

N

Turkish 25204227 25204317

25209456 25209546

N

U.K. English 25204223 25204313

25209453 25209543

N

U.S. English 25204222 25204312

25209452 25209542

N

U.S. English (International, with a Euro symbol) 25204248 25204338

25209478 25209568

N

Chapter 9. Parts list 93

Table 9. Parts list - Keyboard (Chicony)

Language FRU NO. (Windows 7)

FRU NO. (Windows 8)

CRU ID

Arabic 25204296 25204386

25209407 25209497

N

Belgian 25204304 25204394

25209414 25209504

N

Brazilian Portuguese 25204297 25204387

25209408 25209498

N

Bulgarian 25204310 25204400

25209420 25209510

N

Czech, Slovak 25204309 25204399

25209419 25209509

N

C& Nordics 25204303 25204393

25209413 25209503

N

Dutch 25204299 25204389

25209409 25209499

N

French 25204294 25204384

25209405 25209495

N

French, English 25204290 25204380

25209401 25209491

N

German 25204295 25204385

25209406 25209496

N

Greek 25204300 25204390

25209410 25209500

N

Hebrew 25204301 25204391

25209411 25209501

N

Hungarian 25204302 25204392

25209412 25209502

N

Indian 25204311 25204401

25209421 25209511

N

Icelandic 25204305 25204395

25209415 25209505

N

Italian 25204284 25204374

25209395 25209485

N

Japanese 25204298 25204388

25209394 25209484

N

Korean 25204291 25204381

25209402 25209492

N

Latin 25204289 25204379

25209400 25209490

N

Portuguese 25204288 25204378

25209399 25209489

N

Russian 25204293 25204383

25209404 25209494

N

Slovenian 25204306 25204396

25209416 25209506

N

94 Hardware Maintenance Manual

Table 9. Parts list - Keyboard (Chicony) (continued)

Language FRU NO. (Windows 7)

FRU NO. (Windows 8)

CRU ID

Swiss 25204307 25204397

25209417 25209507

N

Spanish 25204285 25204375

25209396 25209486

N

Thai 25204287 25204377

25209398 25209488

N

Traditional Chinese 25204292 25204382

25209403 25209493

N

Turkish 25204286 25204376

25209397 25209487

N

U.K. English 25204283 25204373

25209393 25209483

N

U.S. English 25204282 25204372

25209392 25209482

N

U.S. English (International, with a Euro symbol) 25204308 25204398

25209418 25209508

N

Lenovo V480c

Table 10. Parts list - Keyboard (Dafon)

Language FRU NO. (Windows 7)

FRU NO. (Windows 8)

CRU ID

Arabic 25204446 25209346 N

Belgian 25204454 25209354 N

Brazilian Portuguese 25204447 25209347 N

Bulgarian 25204460 25209360 N

French, English 25204440 25209340 N

Czech, Slovak 25204440 25209359 N

C& Nordics 25204453 25209353 N

Dutch 25204449 25209349 N

French 25204444 25209344 N

German 25204445 25209345 N

Greek 25204450 25209350 N

Hebrew 25204451 25209351 N

Hungarian 25204452 25209352 N

Icelandic 25204455 25209355 N

Indian 25204461 25209361 N

Italian 25204434 25209334 N

Japanese 25204448 25209348 N

Korean 25204441 25209341 N

Latin 25204439 25209339 N

Chapter 9. Parts list 95

Table 10. Parts list - Keyboard (Dafon) (continued)

Language FRU NO. (Windows 7)

FRU NO. (Windows 8)

CRU ID

Portuguese 25204438 25209338 N

Russian 25204443 25209343 N

Slovenian 25204456 25209356 N

Swiss 25204457 25209357 N

Spanish 25204435 25209335 N

Thai 25204437 25209337 N

Traditional Chinese 25204442 25209342 N

Turkish 25204436 25209336 N

U.K. English 25204433 25209333 N

U.S. English 25204432 25209332 N

U.S. English (International, with a Euro symbol) 25204458 25209358 N

Table 11. Parts list - Keyboard (Sunrex)

Language FRU NO. (Windows 7)

FRU NO. (Windows 8)

CRU ID

Arabic 25204476 25209376 N

Belgian 25204484 25209384 N

Brazilian Portuguese 25204477 25209377 N

Bulgarian 25204490 25209390 N

Czech, Slovak 25204489 25209389 N

C& Nordics 25204483 25209383 N

Dutch 25204479 25209379 N

French 25204474 25209374 N

French, English 25204470 25209370 N

German 25204475 25209375 N

Greek 25204480 25209380 N

Hebrew 25204481 25209381 N

Hungarian 25204482 25209382 N

Icelandic 25204485 25209385 N

Indian 25204491 25209391 N

Italian 25204464 25209364 N

Japanese 25204478 25209378 N

Korean 25204471 25209371 N

Latin 25204469 25209369 N

Portuguese 25204468 25209368 N

Russian 25204473 25209373 N

Swiss 25204487 25209387 N

96 Hardware Maintenance Manual

Table 11. Parts list - Keyboard (Sunrex) (continued)

Language FRU NO. (Windows 7)

FRU NO. (Windows 8)

CRU ID

Spanish 25204465 25209365 N

Slovenian 25204486 25209386 N

Thai 25204467 25209367 N

Traditional Chinese 25204472 25209372 N

Turkish 25204466 25209366 N

U.K. English 25204463 25209363 N

U.S. English 25204462 25209362 N

U.S. English (International, with a Euro symbol) 25204488 25209388 N

Table 12. Parts list - Keyboard (Chicony)

Language FRU NO. (Windows 7)

FRU NO. (Windows 8)

CRU ID

Arabic 25204417 25209317 N

Belgian 25204424 25209324 N

Brazilian Portuguese 25204418 25209318 N

Bulgarian 25204430 25209330 N

Czech, Slovak 25204429 25209329 N

C& Nordics 25204423 25209323 N

Dutch 25204419 25209319 N

French 25204415 25209315 N

French, English 25204411 25209311 N

German 25204416 25209316 N

Greek 25204420 25209320 N

Hebrew 25204421 25209321 N

Hungarian 25204422 25209322 N

Indian 25204431 25209331 N

Icelandic 25204425 25209325 N

Italian 25204405 25209305 N

Japanese 25204404 25209304 N

Korean 25204412 25209312 N

Latin 25204410 25209310 N

Portuguese 25204409 25209309 N

Russian 25204414 25209314 N

Slovenian 25204426 25209326 N

Swiss 25204427 25209327 N

Spanish 25204406 25209306 N

Thai 25204408 25209308 N

Chapter 9. Parts list 97

Table 12. Parts list - Keyboard (Chicony) (continued)

Language FRU NO. (Windows 7)

FRU NO. (Windows 8)

CRU ID

Traditional Chinese 25204413 25209313 N

Turkish 25204407 25209307 N

U.K. English 25204403 25209303 N

U.S. English 25204402 25209302 N

U.S. English (International, with a Euro symbol) 25204428 25209328 N

Miscellaneous parts

Lenovo V480

Note: Italicized letters in parentheses are references to the exploded view in Overall on page 82.

Table 13. Parts list - Miscellaneous parts

FRU FRU No. CRU ID

(a) LA48 DC-IN Bracket 33.4TD10.001 90200527 N

(b) LA48 DC-IN Cable 50.4TD05.001 90200515 N

(c) LA48 ODD Bracket 33.4TD06.001 90200518 N

(d) LA48 ODD Bezel Rambo 60.4TD05.001 90200519 N

(e) LA48 HDD Bracket 60.4TE08.001 90200520 N

(f) LA48 Touch Pad Cable 50.4TD03.001 90200513 N

(g) LA48 Power Board Cable 50.4TD02.001 90200512 N

(h) LA48 LCD Cable 50.4TD01.001 90200514 N

LA48 LCD Mylar 40.4TD03.001 90200537 N

LA48 Microphone Rubber 23.42383.001 90200538 N

Lenovo V480c

Note: Italicized letters in parentheses are references to the exploded view in Overall on page 82.

Table 14. Parts list - Miscellaneous parts

FRU FRU No. CRU ID

(a) LB48 FP Bracket 33.4TF04.001 90200758 N

(b) LA48 DC-IN Bracket 33.4TD10.001 90200527 N

(c) LA48 ODD Bracket 33.4TD06.001 90200518 N

(d) LA48 ODD Bezel Rambo 60.4TD05.001 90200519 N

(e) LA48 HDD Bracket 60.4TE08.001 90200520 N

(f) LA48 LCD Cable 50.4TD01.001 90200514 N

LA48 LCD Mylar 40.4TD03.001 90200537 N

98 Hardware Maintenance Manual

ac power adapters

Lenovo V480

Table 15. Parts list3-pin (65 W) ac power adapters

FRU FRU No. CRU ID

Delta ADP-65AD BA EuP model 36200096 *

Liteon PA-1650-76I EuP model 36200097 *

Chicony Power A065R041L EuP model 36200098 *

Delta ADP-65SB B, EPA model 36200033 *

Liteon PA-1650-54I, EPA model 36200034 *

Chicony Power A065R017L, EPA model 36200212 *

Delta ADP-90SD BA, EuP model 36200106 *

LITEON PA-1900-76I, EuP model 36200105 *

Chicony A090A048L, EuP model 36200107 *

Table 16. Parts list3-pin (90 W) ac power adapters

FRU FRU No. CRU ID

Delta ADP-90SD BA, EuP model 36200106 *

LITEON PA-1900-76I, EuP model 36200105 *

Chicony A090A048L, EuP model 36200107 *

Liteon PA-1900-54I, EPA model 36200030 *

Delta ADP-90ZH DA, EPA model 36200031 *

Chicony Power HP-BT090E13LF, EPA model 36200032 *

Lenovo V480c

Table 17. Parts list2-pin (65 W) ac power adapters

FRU FRU No. CRU ID

Delta ADP-65AD AA 36200090 *

Liteon PA-1650-75I 36200092 *

Chicony A065R040L 36200094 *

Delta ADP-65SB A EPA model 36200143 *

Liteon PA-1650-53I EPA model 36200144 *

Chicony A065R028L EPA model 36200210 *

Table 18. Parts list3-pin (65 W) ac power adapters

FRU FRU No. CRU ID

Delta ADP-65AD BA EuP model 36200096 *

Liteon PA-1650-76I EuP model 36200097 *

Chapter 9. Parts list 99

Table 18. Parts list3-pin (65 W) ac power adapters (continued)

FRU FRU No. CRU ID

Chicony Power A065R041L EuP model 36200098 *

Delta ADP-65SB B, EPA model 36200033 *

Liteon PA-1650-54I, EPA model 36200034 *

Chicony Power A065R017L, EPA model 36200212 *

Table 19. Parts list2-pin (90 W) ac power adapters

FRU FRU No. CRU ID

Delta ADP-90SD AA 36200102 *

Liteon PA-1900-75I 36200101 *

Chicony A090A047L 36200103 *

Liteon PA-1900-53I EPA model 36200147 *

Delta ADP-90ZH CA EPA model 36200149 *

Chicony HP-A0905A2C1LF EPA model 36200150 *

Table 20. Parts list3-pin (90 W) ac power adapters

FRU FRU No. CRU ID

Delta ADP-90SD BA, EuP model 36200106 *

LITEON PA-1900-76I, EuP model 36200105 *

Chicony A090A048L, EuP model 36200107 *

Liteon PA-1900-54I, EPA model 36200030 *

Delta ADP-90ZH DA, EPA model 36200031 *

Chicony Power HP-BT090E13LF, EPA model 36200032 *

Power cords A Lenovo power cord for a specific country or region is usually available only in that country or region.

Table 21. Parts list - 3-pin power cords (Linetek)

Country or region FRU No. CRU ID

Argentina

LINETEK LS15+H03VV-F+LP39 1 m

145000599 *

Australia, New Zealand

LINETEK LS15+H03VV-F+LP-23A 1 m

145000589 *

Brazil

LINETEK LS15 H03VV-F LP26A 1 m

145000596 *

CE

LINETEK LP-34+H03VV-F + LS15 1 m

145000585 *

100 Hardware Maintenance Manual

Table 21. Parts list - 3-pin power cords (Linetek) (continued)

Country or region FRU No. CRU ID

China

LINETEK PC323+RVV300/300+LS15 1 m

145000600 *

Denmark

LINETEK LS15+H03VV-F+LP-38 1 m

145000598 *

Indian

LINETEK PE-361+ H05VV-F+ LS15 1 m

145000592 *

Israel

LINETEK LS15+H03VV-F+LP-41 1 m

145000595 *

Italy

LINETEK LS15+H03VV-F+PE-336 1 m

145000591 *

Japan

LINETEK LS15+VCTF+LP-54 1 m

145000587 *

Korea

LINETEK LS15+H05VV-F+LP-E04A 1 m

145000590 *

South Africa

LINETEK LS15+H03VV-F+PE-364 1 m

145000586 *

Switzerland

LINETEK LS15+H03VV-F+LP-37 1 m

145000597 *

Taiwan

LINETEK LS15+VCTF+LP-53 1 m

145000588 *

U.K.

LINETEK LP-61L+ H03VV-F+ LS15 1 m

145000593 *

UL

LINETEK LP-30B + SPT-2 + LS15 1 m

145000594 *

Table 22. Parts list - 3-pin power cords (Longwell)

Country or region FRU No. CRU ID

Argentina

Longwell LP-24+H03VV-F+LS-18 1 m

145000567 *

Australia, New Zealand

Longwell LP-23A+LFC-3R+LS-18 1 m

145000557 *

Brazil

Longwell LP-46+H03VV-F+LS-18 1 m

145000564 *

CE

Longwell LP-34A+H03VV-F+LS-18 1 m

145000553 *

China

Longwell LSG-31+RVV300/300+LS-18 1 m

145000568 *

Chapter 9. Parts list 101

Table 22. Parts list - 3-pin power cords (Longwell) (continued)

Country or region FRU No. CRU ID

Denmark

Longwell LP-40+H03VV-F+LS-18 1 m

145000566 *

Indian

Longwell LP-67+BIS+LS-18 1 m

145000560 *

Israel

Longwell LP-41+H03VV-F+LS-18 1 m

145000563 *

Italy

Longwell LP-22+H03VV-F+LS-18 1 m

145000559 *

Japan

Longwell LP-54+VCTF+LS-18 1 m

145000555 *

Korea

Longwell LP-486+KTLH03VV-F+LS-5 1 m

145000558 *

South Africa

Longwell LP-39+H03VV-F+LS-18 1

145000554 *

Switzerland

Longwell LP-37+H03VV-F+LS-18 1 m

145000565 *

Taiwan

Longwell LP-71+VCTF+LS-33 1 m

145000556 *

U.K.

Longwell LP-61L+H03VV-F+LS-18 1 m

145000561 *

UL

Longwell LP-30B+SPT-2 18AWG+LS-18 1 m

145000562 *

Table 23. Parts list - 3-pin power cords (Volex)

Country or region FRU No. CRU ID

Argentina

VOLEX VA2073+H03VV-F+VAC5S 1 m

145000528 *

Australia, New Zealand

VOLEX AU10S3+H03VV-F+VAC5S 1 m

145000532 *

Brazil

VOLEX CH10S3+H03VV-F+VAC5S 1 m

145000527 *

CE

VOLEX M2511+HO3VV-F+VAC5S 1 m

145000525 *

China

VOLEX GB10S3+RVV 300/500+VAC5S 1 m

145000538 *

Denmark

VOLEX MP233D+H03VV-F+VAC5S 1 m

145000534 *

102 Hardware Maintenance Manual

Table 23. Parts list - 3-pin power cords (Volex) (continued)

Country or region FRU No. CRU ID

Indian

VOLEX IA6A3+IS694+VAC5S 1 m

145000536 *

Israel

VOLEX SI16S3+H03VV-F+VAC5S 1 m

145000526 *

Italy

VOLEX IT10S3+HO3VV-F+VAC5S 1 m

145000535 *

Japan

VOLEX VAC5S+VCTF+M755 1 m

145000530 *

Korea

VOLEX M2511+KETI IEC+VAC5S 1 m

145000533 *

South Africa

VOLEX SA16A+HO3VV-F+VAC5S 1 m

145000529 *

Switzerland

VOLEX MP232+H03VV-F+VAC5S 1 m

145000524 *

Taiwan

VOLEX TW15CS3+VCTF+VAC5S 1 m

145000531 *

U.K.

VOLEX MP5004+H03VV-F+VAC5S 1 m

145000605 *

UL

Volex US15S3+SPT-2 VAC5S 1 m

145000537 *

Table 24. Parts list - 2-pin power cords (Linetek)

Country or region FRU No. CRU ID

Africa

LINETEK PE364("O")+H03VVH2-F+LS7H 1 m

145500024 *

Argentina

LINETEK LP40+H03VVH2-F+LS7H 1 m

145500030 *

Australia

LINETEK LP15A+H03VVH2-F+LS7 1 m

145500023 *

Brazil

LINETEK LP25+H03VVH2-F+LS7H 1 m

145500028 *

CCC

LINETEK PC205+RVV 0.75/2C+COC03 1 m

145500018 *

CE

LINETEK LP21+H03VVH2-F+ LS7 1 m

145500022 *

India

LINETEK LP28+IS:694 0.75/2C+ LS7H 1 m

145500020 *

Chapter 9. Parts list 103

Table 24. Parts list - 2-pin power cords (Linetek) (continued)

Country or region FRU No. CRU ID

Israel

LINETEK LP45+H03VV-F+LS7 1 m

145500029 *

Japan

LINETEK LP51A+HVCTFK 0.75/2C+LS7J 1 m

145500026 *

Korea

LINETEK LPE03A+H03VVH2-F+LS7 1 m

145500025 *

Taiwan

LINETEK LP51A+VCTFK 0.75/2C+LS7J 1 m

145500027 *

UL

LINETEK LP5+SPT-2 #18/2C+ LS7C 1 m

145500021 *

UK

LINETEK LP61L+H03VVH2-F+ LS7H 1 m

145500019 *

104 Hardware Maintenance Manual

Appendix A. Notices

Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any Lenovo intellectual property right may be used instead. However, it is the user's responsibility to evaluate and verify the operation of any other product, program, or service.

Lenovo may have patents or pending patent applications covering subject matter described in this document. The furnishing of this document does not give you any license to these patents. You can send license inquiries, in writing, to:

Lenovo (United States), Inc. 1009 Think Place - Building One Morrisville, NC 27560 U.S.A. Attention: Lenovo Director of Licensing

LENOVO PROVIDES THIS PUBLICATION AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some jurisdictions do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you.

This information could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in new editions of the publication. Lenovo may make improvements and/or changes in the product(s) and/or the program(s) described in this publication at any time without notice.

The products described in this document are not intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. The information contained in this document does not affect or change Lenovo product specifications or warranties. Nothing in this document shall operate as an express or implied license or indemnity under the intellectual property rights of Lenovo or third parties. All information contained in this document was obtained in specific environments and is presented as an illustration. The result obtained in other operating environments may vary.

Lenovo may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you.

Any references in this publication to non-Lenovo Web sites are provided for convenience only and do not in any manner serve as an endorsement of those Web sites. The materials at those Web sites are not part of the materials for this Lenovo product, and use of those Web sites is at your own risk.

Any performance data contained herein was determined in a controlled environment. Therefore, the result obtained in other operating environments may vary significantly. Some measurements may have been made on development-level systems and there is no guarantee that these measurements will be the same on generally available systems. Furthermore, some measurements may have been estimated through extrapolation. Actual results may vary. Users of this document should verify the applicable data for their specific environment.

Copyright Lenovo 2012 105

Electronic emissions notices For electronic emission information on Class B digital devices, refer to the corresponding information in the User Guide.

EU contact: Lenovo, Einsteinova 21, 851 01 Bratislava, Slovakia

Trademarks The following terms are trademarks of Lenovo in the United States, other countries or both:

Active Protection System Lenovo OneKey

Windows is a trademark of the Microsoft group of companies.

Intel is a trademark of Intel Corporation in the U.S. and/or other countries.

Other company, product, or service names may be trademarks or service marks of others.

106 Hardware Maintenance Manual

Part Number:

<

Manualsnet FAQs

If you want to find out how the V480c Lenovo works, you can view and download the Lenovo V480c Laptop Hardware Maintenance Manual on the Manualsnet website.

Yes, we have the Hardware Maintenance Manual for Lenovo V480c as well as other Lenovo manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Hardware Maintenance Manual should include all the details that are needed to use a Lenovo V480c. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Lenovo V480c Laptop Hardware Maintenance Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Lenovo V480c Laptop Hardware Maintenance Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Lenovo V480c Laptop Hardware Maintenance Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Lenovo V480c Laptop Hardware Maintenance Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Lenovo V480c Laptop Hardware Maintenance Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.