Lenovo IdeaPad 700-17ISK Laptop Hardware Maintenance Manual PDF

1 of 84
1 of 84

Summary of Content for Lenovo IdeaPad 700-17ISK Laptop Hardware Maintenance Manual PDF

ideapad 700-15ISK&700-17ISK Hardware Maintenance Manual

Notes: Beforeusingthisinformationandtheproductitsupports,besuretoreadthegeneralinformationunder Noticesonpage79.

First Edition (November 2015) Copyright Lenovo 2015. All rights reserved. LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant a General Services Administration GSA contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925. 2015 Lenovo

iii

Contents About this manual ....................................... iv

Safety information ........................................ 1 General safety ................................................ 2 Electrical safety .............................................. 3 Safety inspection guide .................................. 5 Handling devices that are sensitive to electrostatic discharge .................................... 6 Grounding requirements ................................. 6 Safety notices: multilingual translations.......... 7 Laser compliance statement......................... 14

Important service information ................... 16 Strategy for replacing FRUs ......................... 16

Strategy for replacing a hard disk drive ............17 Important notice for replacing a system board ................................................................17

Important information about replacing RoHS compliant FRUs ............................................ 18

General checkout ...................................... 19 What to do first ............................................. 20 Power system checkout................................ 21

Checking the AC adapter .................................21 Checking operational charging .........................21

Related service information ...................... 23 Restoring the factory contents by using OneKey Recovery ........................................ 23

Restore of factory default .................................23 Passwords .................................................... 24

Power-on password ..........................................24 Hard-disk password ..........................................24 Supervisor password ........................................24

Power management ..................................... 25 Screen blank state ............................................25 Putting the computer to sleep or shutting it down .................................................................25 Putting your computer to sleep .........................25 Shutting down the computer .............................26

ideapad 700-15ISK&700-17ISK .................. 27 Specifications ............................................... 27 Status indicators ........................................... 29 Fn key combinations..................................... 30 FRU replacement notices ............................. 31

Screw notices ..................................................31 Removing and replacing an FRU ................. 32

1010 Base cover ...............................................33 1020 Battery pack .............................................35 1030 Hard disk drive ........................................36 1040 PCI Express Mini Card for wireless LAN ...................................................................38 1050 SSD Card(On select models) ..................40

1060 DIMM .......................................................41 1070 Fan assembly and heat sink assembly...........................................................44 1080 Speakers .................................................45 1090 System board ..........................................46 1100 Power assembly, Touchpad module and IO board ............................................................49 1110 LCD unit ...................................................51 1120 LCD front bezel ........................................53 1130 LCD panel, LCD cable, LCD bracket and hinges ...............................................................54 1140 Integrated camera ....................................56 1150 Antenna assembly and LCD cover...........57

Locations ...................................................... 58 Front view and right-side view ..........................58 Bottom and Left-side view ...............................59

Parts list ........................................................ 60 Overall ..............................................................61 LCD FRUs ........................................................72 Miscellaneous parts ..........................................74 Screw ................................................................74 AC adapters ......................................................75 Power cords ......................................................76

Notices......................................................... 79 Trademarks .................................................. 80

iv

About this manual

This manual contains service and reference information for the following Lenovo product:

ideapad 700-15ISK&700-17ISK Use this manual to troubleshoot problems. The manual is divided into the following sections: The common sections provide general information, guidelines, and safety

information required for servicing computers. The product-specific section includes service, reference, and product-specific

parts information.

Important: ThismanualisintendedonlyfortrainedservicerswhoarefamiliarwithLenovo products.Usethismanualtotroubleshootproblemseffectively. BeforeservicingaLenovoproduct,makesuretoreadall theinformationunder Safetyinformationonpage1andImportantserviceinformationonpage16.

1

Safety information

Safety information

This chapter presents the following safety information that you need to get familiar with before you service an ideapad 700-15ISK&700-17ISK computer: General safety on page 2 Electrical safety on page 3 Safety inspection guide on page 5 Handling devices that are sensitive to electrostatic discharge on page 6 Grounding requirements on page 6 Safety notices: multilingual translations on page 7 Laser compliance statement on page 14

2

ideapad 700-15ISK/ideapad 700-17ISK Hardware Maintenance Manual

General safety Follow these rules below to ensure general safety: Observe a good housekeeping in the area where the machines are put

during and after the maintenance. When lifting any heavy object:

1. Make sure that you can stand safely without slipping. 2. Distribute the weight of the object equally between your feet. 3. Use a slow lifting force. Never move suddenly or twist when you attempt

to lift it. 4. Lift it by standing or pushing up with your leg muscles; this action could

avoid the strain from the muscles in your back. Do not attempt to lift any object that weighs more than 16 kg (35 lb) or that you think is too heavy for you.

Do not perform any action that causes hazards to the customer, or that makes the machine unsafe.

Before you start the machine, make sure that other service representatives and the customer are not in a hazardous position.

Please remove covers and other parts in a safe place, away from all personnel, while you are servicing the machine.

Keep your toolcase away from walk areas so that other people will not trip over it.

Do not wear loose clothing that can be trapped in the moving parts of the machine. Make sure that your sleeves are fastened or rolled up above your elbows. If your hair is long, fasten it.

Insert the ends of your necktie or scarf inside clothing or fasten it with the nonconductive clip, about 8 centimeters (3 inches) from the end.

Do not wear jewelry, chains, metal-frame eyeglasses, or metal fasteners for your clothing. Attention: Metal objects are good electrical conductors.

Wear safety glasses when you are hammering, drilling, soldering, cutting wire, attaching springs, using solvents, or working in any other conditions that may be hazardous to your eyes.

After service, reinstall all safety shields, guards, labels, and ground wires. Replace any safety device that is worn or defective.

Reinstall all covers correctly before returning the machine to the customer. Fan louvers on the machine help to prevent the overheating of internal

components. Do not obstruct fan louvers or cover them with labels or stickers.

3

About this manual

Electrical safety Observe the following rules when working on electrical equipments.

Important: Useonlyapproved toolsand testequipments.Somehand toolshavehandles coveredwithasoftmaterial thatdoesnot insulateyouwhenworkingwithlive electricalcurrents. Manycustomershaverubberfloormatsnear theirmachines thatcontainsmall conductivefiberstodecreaseelectrostaticdischarges.Donotusesuchkindofmat toprotectyourselffromelectricalshock.

Find the room emergency power-off (EPO) switch, disconnecting switch or electrical outlet. If an electrical accident occurs, you can then operate the switch or unplug the power cord quickly.

Do not work alone under hazardous conditions or near the equipment that has hazardous voltages.

Disconnect all power before: Performing a mechanical inspection Working near power supplies Removing or installing main units

Before you start to work on the machine, unplug the power cord. If you cannot unplug it, ask the customer to power-off the wall box that supplies power to the machine, and to lock the wall box in the off position.

If you need to work on a machine that has exposed electrical circuits, observe the following precautions: Ensure that another person, familiar with the power-off controls, is near

you. Attention: Another person must be there to switch off the power, if

necessary. Use only one hand when working with powered-on electrical equipment;

keep the other hand in your pocket or behind your back. Attention: An electrical shock can occur only when there is a complete

circuit. By observing the above rule, you may prevent a current from passing through your body.

When using testers, set the controls correctly and use the approved probe leads and accessories for that tester.

Stand on suitable rubber mats (obtained locally, if necessary) to insulate you from grounds such as metal floor strips and machine frames.

Observe the special safety precautions when you work with very high voltages; instructions for these precautions are in the safety sections of maintenance information. Be extremely careful when you measure the high voltages. Regularly inspect and maintain your electrical hand tools for safe operational

condition. Do not use worn or broken tools and testers. Never assume that power has been disconnected from a circuit. First, check

it to make sure that it has been powered off.

4

ideapad 700-15ISK/ideapad 700-17ISK Hardware Maintenance Manual

Always look carefully for possible hazards in your work area. Examples of these hazards are moist floors, nongrounded power extension cables, power surges, and missing safety grounds.

Do not touch live electrical circuits with the reflective surface of a plastic dental mirror. The surface is conductive; such touching can cause personal injury and machine damage.

Do not service the following parts with the power on when they are removed from their normal operating places in a machine: Power supply units Pumps Blowers and fans Motor generators and similar units. (This practice ensures correct grounding of the units.)

If an electrical accident occurs: Caution: do not become a victim yourself. Switch off the power. Send the victim to get medical aid.

5

About this manual

Safety inspection guide The purpose of this inspection guide is to assist you in identifying potential unsafe conditions. As each machine was designed and built, required safety items were installed to protect users and service personnel from injury. This guide addresses only those items. You should use good judgment to identify potential safety hazards according to the attachment of non-Lenovo features or options not covered by this inspection guide.

If any unsafe conditions are present, you must determine how serious the apparent hazard could be and whether you can continue without first correcting the problem.

Consider these conditions and the safety hazards they present: Electrical hazards, especially primary power (primary voltage on the frame

can cause serious or fatal electrical shock) Explosive hazards, such as a damaged CRT face or a bulging capacitor Mechanical hazards, such as loose or missing hardware

To determine whether there are any potential unsafe conditions, use the following checklist at the beginning of every service task. Begin the checks with the power off, and the power cord disconnected.

Checklist: 1. Check exterior covers for damage (loose, broken, or sharp edges). 2. Turn off the computer. Disconnect the power cord. 3. Check the power cord for:

a. A third-wire ground connector in good condition. Use a meter to measure third-wire ground continuity for 0.1 ohm or less between the external ground pin and the frame ground.

b. The power cord should be the type specified in the parts list. c. Insulation must not be frayed or worn.

4. Check for cracked or bulging batteries. 5. Remove the cover. 6. Check for any obvious non-Lenovo alterations. Use good judgment as to the

safety of any non-Lenovo alterations. 7. Check inside the unit for any obvious unsafe conditions, such as metal

filings, contamination, water or other liquids, or signs of fire or smoke damage.

8. Check for worn, frayed, or pinched cables. 9. Check that the power-supply cover fasteners (screws or rivets) have not

been removed or tampered with.

6

ideapad 700-15ISK/ideapad 700-17ISK Hardware Maintenance Manual

Handling devices that are sensitive to electrostatic discharge Any computer part containing transistors or integrated circuits (ICs) should be considered sensitive to electrostatic discharge (ESD). ESD damage can occur when there is a difference in charge between objects. Protect against ESD damage by equalizing the charge so that the machine, the part, the work mat, and the person handling the part are all at the same charge.

Notes: 1. Useproduct-specificESDprocedureswhen theyexceed the requirements

notedhere. 2. Makesurethat theESDprotectivedevicesyouusehavebeencertified(ISO

9000)asfullyeffective.

When handling ESD-sensitive parts: Keep the parts in protective packages until they are inserted into the product. Avoid contact with other people. Wear a grounded wrist strap against your skin to eliminate static on your

body. Prevent the part from touching your clothing. Most clothing is insulative and

retains a charge even when you are wearing a wrist strap. Use the black side of a grounded work mat to provide a static-free work

surface. The mat is especially useful when handling ESD-sensitive devices. Select a grounding system, such as those listed below, to provide protection

that meets the specific service requirement.

Note: TheuseofagroundingsystemtoguardagainstESDdamageisdesirablebutnot necessary.

Attach the ESD ground clip to any frame ground, ground braid, or green- wire ground.

When working on a double-insulated or battery-operated system, use an ESD common ground or reference point. You can use coax or connector- outside shells on these systems.

Use the round ground prong of the ac plug on ac-operated computers.

Grounding requirements Electrical grounding of the computer is required for operator safety and correct system function. Proper grounding of the electrical outlet can be verified by a certified electrician.

7

About this manual

Safety notices: multilingual translations The safety notices in this section are provided in English, French, German, Hebrew, Italian, Japanese, and Spanish.

Safety notice 1 BeforethecomputerispoweredonafterFRUreplacement,makesureallscrews, springs, andother smallparts are inplaceandarenot left loose inside the computer.Verifythisbyshakingthecomputerandlisteningforrattlingsounds. Metallicpartsormetalflakescancauseelectricalshorts. Avantderemettre lordinateursous tensionaprsremplacementduneuniten clientle,vrifiezquetouslesressorts,visetautrespicessontbienenplaceet bienfixes.Pourcefaire,secouezlunitetassurez-vousquaucunbruitsuspect neseproduit.Despicesmtalliquesoudescopeauxdemtalpourraientcauser uncourt-circuit. BevornacheinemFRU-AustauschderComputerwiederangeschlossenwird, musichergestelltwerden,dakeineSchrauben,FedernoderandereKleinteile fehlenoderimGehusevergessenwurden.DerComputermugeschtteltundauf Klappergeruschegeprftwerden.Metallteileoder-splitterknnenKurzschlsse erzeugen.

Primadiaccenderelelaboratoredopochestataeffettuatalasostituzionediuna FRU,accertarsichetutteleviti,lemolleetuttelealtripartidipiccoledimensioni sianonellacorrettaposizioneenonsianosparseallinternodellelaboratore. Verificareciscuotendolelaboratoreeprestandoattenzioneadeventualirumori; eventualipartiopezzettimetallicipossonoprovocarecortocircuitipericolosi.

Antesdeencenderel sistemadespuesde sustituirunaFRU,compruebeque todos los tornillos,muellesydemspiezaspequeasseencuentranensusitio ynoseencuentransueltasdentrodelsistema.Comprubeloagitandoelsistema yescuchandolosposiblesruidosqueprovocaran.Laspiezasmetlicaspueden causarcortocircuitoselctricos.

8

ideapad 700-15ISK/ideapad 700-17ISK Hardware Maintenance Manual

Safety notice 2

DANGER Somestandbybatteriescontainasmallamountofnickelandcadmium.Donot disassembleastandbybattery, recharge it, throwit intofireorwater,orshort- circuit it.Disposeof thebatteryasrequiredbylocalordinancesorregulations. Useonlythebatteryintheappropriatepartslisting.Useofanincorrectbatterycan resultinignitionorexplosionofthebattery. Certainesbatteriesde secourscontiennentdunickel etducadmium.Ne les dmontezpas,ne les rechargezpas,ne lesexposezni au feuni leau.Ne lesmettezpasencourt-circuit.Pour lesmettreaurebut,conformez-vous la rglementationenvigueur.Lorsquevousremplacezlapiledesauvegardeoucelle delhorlogetempsrel,veilleznutiliserquelesmodlescitsdanslalistede picesdtachesadquate.Unebatterieouunepileinapproprierisquedeprendre feuoudexploser. DieBereitschaftsbatterie, die sich unter demDiskettenlaufwerk befindet, kanngeringeMengenNickelundCadmiumenthalten.Siedarfnichtzerlegt, wiederaufgeladen,kurzgeschlossen,oderFeueroderWasserausgesetztwerden. BeiderEntsorgungdiertlichenBestimmungenfrSondermllbeachten.Beim ErsetzenderBereitschafts-oderSystembatterienurBatteriendesTypsverwenden, der inderErsatzteillisteaufgefhrt ist.DerEinsatzfalscherBatterienkannzu EntzndungoderExplosionfhren.

Alcunebatteriedi riservacontengonounapiccolaquantitdinichelecadmio. Nonsmontarle, ricaricarle,gettarlenel fuocoonellacquancortocircuitarle. Smaltirlesecondolanormativainvigore(DPR915/82,successivedisposizionie disposizionilocali).QuandosisostituiscelabatteriadellRTC(realtimeclock)o labatteriadisupporto,utilizzaresoltantoi tipi inseritinellappropriatoCatalogo parti.Limpiegodiunabatterianonadattapotrebbedeterminare lincendioo lesplosionedellabatteriastessa.

Algunasbaterasdereservacontienenunapequeacantidaddenquelycadmio. Nolasdesmonte,nirecargue,ni lasechealfuegooalaguanilascortocircuite. Deschelas talcomodispone lanormativa local.Utilice slobaterasquese encuentrenenlalistadepiezas.Lautilizacindeunabateranoapropiadapuede provocarlaignicinoexplosindelamisma.

9

About this manual

Safety notice 3

DANGER Thebatterypackcontainssmallamountsofnickel.Donotdisassembleit, throw itintofireorwater,orshort-circuitit.Disposeofthebatterypackasrequiredby localordinancesorregulations.Useonlythebatteryintheappropriatepartslisting whenreplacingthebatterypack.Useofanincorrectbatterycanresultinignition orexplosionofthebattery. Labatteriecontientdunickel.Neladmontezpas,nelexposezniaufeunileau. Nelamettezpasencourt-circuit.Pour lamettreaurebut,conformez-vous la rglementationenvigueur.Lorsquevousremplacezlabatterie,veilleznutiliser que lesmodlescitsdans la listedepicesdtachesadquate.Eneffet,une batterieinapproprierisquedeprendrefeuoudexploser. Akkus enthalten geringeMengen vonNickel. Sie drfen nicht zerlegt, wiederaufgeladen,kurzgeschlossen,oderFeueroderWasserausgesetztwerden. BeiderEntsorgungdiertlichenBestimmungenfrSondermllbeachten.Beim ErsetzenderBatterienurBatteriendesTypsverwenden,derinderErsatzteilliste aufgefhrtist.DerEinsatzfalscherBatterienkannzuEntzndungoderExplosion fhren.

Labatteriacontienepiccolequantitdinichel.Nonsmontarla,gettarlanelfuoco onellacquancortocircuitarla.Smaltirlasecondolanormativainvigore(DPR 915/82,successivedisposizioniedisposizioni locali).Quandosisostituisce la batteria,utilizzaresoltantoitipiinseritinellappropriatoCatalogoparti.Limpiego diunabatterianonadattapotrebbedeterminare lincendioo lesplosionedella batteriastessa.

Lasbateras contienenpequeas cantidadesdenquel.No lasdesmonte,ni recargue,nilasechealfuegooalaguanilascortocircuite.Deschelastalcomo disponelanormativalocal.Utiliceslobaterasqueseencuentrenenlalistade piezasalsustituir labatera.Lautilizacindeunabateranoapropiadapuede provocarlaignicinoexplosindelamisma.

10

ideapad 700-15ISK/ideapad 700-17ISK Hardware Maintenance Manual

Safety notice 4

DANGER The lithiumbatterycancausea fire, anexplosion,ora severeburn.Donot rechargeit, removeitspolarizedconnector,disassembleit,heat itabove100C (212F),incinerateit,orexposeitscellcontentstowater.Disposeofthebatteryas requiredbylocalordinancesorregulations.Useonlythebatteryintheappropriate partslisting.Useofanincorrectbatterycanresultinignitionorexplosionofthe battery. Lapiledesauvegardecontientdulithium.Elleprsentedesrisquesdincendie, dexplosionoudebrluresgraves.Ne la rechargezpas, ne retirezpas son connecteurpolarisetne ladmontezpas.Nelexposezpasunetemperature suprieure100C,nelafaitespasbrleretnenexposezpaslecontenuleau. Mettez lapileaurebutconformment larglementationenvigueur.Unepile inapproprierisquedeprendrefeuoudexploser. DieSystembatterieisteineLithiumbatterie.Siekannsichentznden,explodieren oderschwereVerbrennungenhervorrufen.BatteriendiesesTypsdrfennicht aufgeladen,zerlegt,ber100Cerhitztoderverbranntwerden.Auchdarf ihr InhaltnichtmitWasser inVerbindunggebrachtoderderzur richtigenPolung angebrachteVerbindungssteckerentferntwerden.BeiderEntsorgungdiertlichen BestimmungenfrSondermllbeachten.BeimErsetzenderBatterienurBatterien desTypsverwenden,derinderErsatzteillisteaufgefhrtist.DerEinsatzfalscher BatterienkannzuEntzndungoderExplosionfhren.

Labatteriadi supportoeunabatteriaal litioepuo incendiarsi, esplodereo procuraregraviustioni.Evitarediricaricarla,smontarneilconnettorepolarizzato, smontarla, riscaldarlaaduna temperatura superioreai100gradi centigradi, incendiarlaogettarla inacqua.Smaltirlasecondolanormativa invigore(DPR 915/82,successivedisposizioniedisposizioni locali).Limpiegodiunabatteria nonadattapotrebbedeterminarelincendioolesplosionedellabatteriastessa.

Labatera de repuesto es unabatera de litioypuedeprovocar incendios, explosionesoquemadurasgraves.Nolarecargue,niquiteelconectorpolarizado, ni ladesmonte,nicalienteporencimade los100C(212F),ni la incinereni expongael contenidode susceldasal agua.Deschela tal comodispone la normativalocal.

11

About this manual

Safety notice 5 IftheLCDbreaksandthefluidfrominsidetheLCDgetsintoyoureyesoronyour hands, immediatelywashtheaffectedareaswithwaterat least for15minutes. Seekmedicalcareifanysymptomscausedbythefluidarepresentafterwashing. Silepanneaudaffichagecristauxliquidessebriseetquevousrecevezdansles yeuxousur lesmainsunepartiedufluide,rincez-lesabondammentpendantau moinsquinzeminutes.Consultezunmdecinsidessymptmespersistentaprsle lavage. DieLeuchtstoffrhreimLCD-BildschirmenthltQuecksilber.BeiderEntsorgung diertlichenBestimmungen frSondermllbeachten.DerLCD-Bildschirm bestehtausGlasundkannzerbrechen,wennerunsachgembehandeltwird oderderComputeraufdenBodenfllt.WennderBildschirmbeschdigtistund diedarinbefindlicheFlssigkeit inKontaktmitHautundAugengert,sollten diebetroffenenStellenmindestens15MinutenmitWasserabgespltundbei BeschwerdenanschlieendeinArztaufgesuchtwerden.

Nelcasochecaso lLCDsidovesse rompereed il liquido inessocontenuto entrasse incontattocongliocchio lemani, lavare immediatamente leparti interessateconacquacorrenteperalmeno15minuti;poiconsultareunmedicosei sintomidovesseropermanere.

SilaLCDserompeyelfluidodesuinteriorentraencontactoconsusojososus manos, lave inmediatamente lasreasafectadasconaguadurante15minutos comomnimo.Obtengaatencinmedicasisepresentaalgnsntomadelfluido despuesdelavarse.

12

ideapad 700-15ISK/ideapad 700-17ISK Hardware Maintenance Manual

Safety notice 6

DANGER Toavoidshock,donotremovetheplasticcoverthatprotectsthelowerpartofthe invertercard. Afindviter toutrisquedechoclectrique,neretirezpaslecacheenplastique protgeantlapartieinfrieuredelacartedalimentation. AusSicherheitsgrndendieKunststoffabdeckung,diedenunterenTeil der Spannungswandlerplatineumgibt,nichtentfernen.

Perevitarescosseelettriche,nonrimuoverelacoperturainplasticacheavvolgela parteinferioredellaschedainvertitore.

Paraevitardescargas,noquitelacubiertadeplsticoquerodealapartebajadela tarjetainvertida.

Safety notice 7

DANGER Thoughthemainbatterieshavelowvoltage,ashortedorgroundedbatterycan produceenoughcurrenttoburnpersonnelorcombustiblematerials. Bienquelevoltagedesbatteriesprincipalessoitpeulev,lecourt-circuitoula miselamassedunebatteriepeutproduiresuffisammentdecourantpourbrler desmatriauxcombustiblesoucauserdesbrlurescorporellesgraves. ObwohlHauptbatterieneineniedrigeSpannunghaben,knnen siedochbei KurzschluoderErdunggenugStromabgeben,umbrennbareMaterialienzu entzndenoderVerletzungenbeiPersonenhervorzurufen.

Sebbene lebatteriedialimentazionesianoabassovoltaggio,unabatteria in cortocircuitooamassapufornirecorrentesufficientedabruciaremateriali combustibilioprovocareustioniaitecnicidimanutenzione.

Aunquelasbaterasprincipalestienenunvoltajebajo,unabateracortocircuitada oconcontactoatierrapuedeproducir lacorrientesuficientecomoparaquemar materialcombustibleoprovocarquemadurasenelpersonal.

13

About this manual

Safety notice 8

DANGER BeforeremovinganyFRU,turnoff thecomputer,unplugallpowercordsfrom electricaloutlets,removethebatterypack,andthendisconnectanyinterconnecting cables. Avantderetireruneunitremplaableenclientle,mettezlesystmehorstension, dbrancheztouslescordonsdalimentationdessoclesdeprisedecourant,retirez labatterieetdconnecteztouslescordonsdinterface. DieStromzufuhrmuabgeschaltet,alleStromkabelausderSteckdosegezogen, derAkkuentferntundalleVerbindungskabelabgenommensein,bevoreineFRU entferntwird.

Primadi rimuoverequalsiasiFRU,spegnere il sistema,scollegaredalleprese elettrichetuttiicavidialimentazione,rimuoverelabatteriaepoiscollegareicavi diinterconnessione.

AntesdequitarunaFRU,apagueel sistema,desenchufe todos loscablesde las tomasdecorrienteelctrica,quite labateray,acontinuacin,desconecte cualquiercabledeconexinentredispositivos.

14

ideapad 700-15ISK/ideapad 700-17ISK Hardware Maintenance Manual

Laser compliance statement Some models of Lenovo computer are equipped from the factory with an optical storage device such as a CD-ROM drive or a DVD-ROM drive. Such devices are also sold separately as options. If one of these drives is installed, it is certified in the U.S. to conform to the requirements of the Department of Health and Human Services 21 Code of Federal Regulations (DHHS 21 CFR) Subchapter J for Class 1 laser products. Elsewhere, the drive is certified to conform to the requirements of the International Electrotechnical Commission (IEC) 825 and CENELEC EN 60 825 for Class 1 laser products.

If a CD-ROM drive, a DVD-ROM drive, or another laser device is installed, note the following:

CAUTION Useofcontrolsoradjustmentsorperformanceofproceduresother than those specifiedhereinmightresultinhazardousradiationexposure. Ousodecontroles,ajustesoudesempenhodeprocedimentosdiferentesdaqueles aquiespecificadospoderesultaremperigosaexposioradiao.

Pourviter tout risquedexpositionaurayon laser, respectez lesconsignesde rglageetdutilisationdescommandes,ainsiquelesprocduresdcrites. WerdenSteuer-undEinstellelementeandersalshierfestgesetztverwendet,kann gefhrlicheLaserstrahlungauftreten.

Lutilizzodicontrolli,regolazioniolesecuzionediprocedurediversedaquelle specificatepossonoprovocarelesposizionea.

Elusodecontrolesoajustesolaejecucindeprocedimientosdistintosdelosaqu especificadospuedeprovocarlaexposicinaradiacionespeligrosas.

Opening the CD-ROM drive, the DVD-ROM drive, or any other optical storage device could result in exposure to hazardous laser radiation. There are no serviceable parts inside those drives. Do not open.

15

About this manual

A CD-ROM drive, a DVD-ROM drive, or any other storage device installed may contain an embedded Class 3A or Class 3B laser diode. Note the following:

DANGER Emitsvisibleandinvisiblelaserradiationwhenopen.Donotstareintothebeam, donotviewdirectlywithoptical instruments,andavoiddirectexposure to the beam. Radiao por raio laser ao abrir.Noolhe fixo no feixe de luz, no olhe diretamentepormeiodeinstrumentosticoseeviteexposiodiretacomofeixe deluz.

Rayonnement lasersicarterouvert.vitezdefixer le faisceau,de le regarder directementavecdesinstrumentsoptiques,oudevousexposeraurayon. LaserstrahlungbeigeffnetemGert.NichtdirektoderberoptischeInstrumente indenLaserstrahlsehenunddenStrahlungsbereichmeiden. Kinyitskor lzersugr !Ne nzzen bele se szabad szemmel, se optikai eszkzkkel.Kerljeasugrnyalbbalvalrintkezst! Aprendo lunitvengonoemesse radiazioni laser.Non fissare il fascio,non guardarlodirettamenteconstrumentiotticieevitarelesposizionedirettaalfascio.

Radiacinlseralabrir.Nomirefijamenteniexamineconinstrumentalpticoel hazdeluz.Evitelaexposicindirectaalhaz.

16

ideapad 700-15ISK/ideapad 700-17ISK Hardware Maintenance Manual

Important service information

This chapter presents the following important service information: Strategy for replacing FRUs on page 16

Strategy for replacing a hard disk drive on page 17 Important notice for replacing a system board on page 17

Important information about replacing RoHS compliant FRUs on page 18

Important: BIOSanddevicedriverfixesarecustomer-installable.TheBIOSanddevice driversarepostedonthecustomersupportsite: http://support.lenovo.com.

Strategy for replacing FRUs

Before replacing parts: Make sure that all software fixes, drivers, and BIOS downloads are installed before replacing any FRUs listed in this manual. After a system board is replaced, ensure that the latest BIOS is loaded to the system board before completing the service action. To download software fixes, drivers, and BIOS, follow the steps below: 1. Go to http://support.lenovo.com. 2. Enter the serial number or select a product or use Lenovo smart

downloading. 3. Select the BIOS/Driver/Applications and download. 4. Follow the directions on the screen and install the necessary software.

17

Important service information

Use the following strategy to prevent unnecessary expense for replacing and servicing FRUs: If you are instructed to replace an FRU, but the replacement does not solve

the problem, reinstall the original FRU before you continue. Some computers have both a processor board and a system board. If you

are instructed to replace either of them, and replacing one of them does not solve the problem, reinstall that board, and then replace the other one.

If an adapter or a device consists of more than one FRU, any of the FRUs may be the cause of the error. Before replacing the adapter or device, remove the FRUs one by one to see if the symptoms change. Replace only the FRU that changed the symptoms.

Attention: The setup configuration on the computer you are servicing may have been customized. Running Automatic Configuration may alter the settings. Note the current configuration settings (using the View Configuration option); then, when service has been completed, verify that those settings remain in effect.

Strategy for replacing a hard disk drive Always try to run a low-level format before replacing a hard disk drive. This will cause all customer data on the hard disk to be lost. Make sure that the customer has a current backup of the data before performing this action. Attention: The drive startup sequence in the computer you are servicing may have been changed. Be extremely careful during write operations such as copying, saving, or formatting. If you select an incorrect drive, data or programs can be overwritten.

Important notice for replacing a system board Some components mounted on a system board are very sensitive. Improper handling can cause damage to those components, and may cause a system malfunction. Attention: When handling a system board: Do not drop the system board or apply any excessive force to it. Avoid rough handling of any kind. Avoid bending the system board and hard pushing to prevent cracking at

each BGA (Ball Grid Array) chipset.

18

ideapad 700-15ISK/ideapad 700-17ISK Hardware Maintenance Manual

Important information about replacing RoHS compliant FRUs

RoHS, The Restriction of Hazardous Substances in Electrical and Electronic Equipment Directive (2002/95/EC) is a European Union legal requirement affecting the global electronics industry. RoHS requirements must be implemented on Lenovo products placed on the market after June 2006. Products on the market before June 2006 are not required to have RoHS compliant parts. If the original FRU parts are non-compliant, replacement parts can also be non-compliant. In all cases if the original FRU parts are RoHS compliant, the replacement part must also be RoHS compliant.

Note: RoHS and non-RoHS FRU part numbers with the same fit and function are identified with unique FRU part numbers.

Lenovo plans to transit to RoHS compliance well before the implementation date and expects its suppliers to be ready to support Lenovos requirements and schedule in the EU. Products sold in 2005 and 2006 will contain some RoHS compliant FRUs. The following statement pertains to these products and any product Lenovo produces containing RoHS compliant FRUs.

RoHS compliant FRUs have unique FRU part numbers. Before or after the RoHS implementation date, failed RoHS compliant parts must always be replaced with RoHS compliant ones, so only the FRUs identified as compliant in the system HMM or direct substitutions for those FRUs may be used.

Products marketed before June 2006 Products marketed after June 2006 Current or original part

Replacement FRU Current or original part

Replacement FRU

Non-RoHS Can be Non-RoHS

Must be RoHS Must be RoHS Non-RoHS Can be RoHS

Non-RoHS Can sub to RoHS

RoHS Must be RoHS

Note: A direct substitution is a part with a different FRU part number that is automatically shipped by the distribution center at the time of the order.

19

General checkout

General checkout

This chapter presents the following information: What to do first on page 20 Power system checkout on page 21

Before you go to the checkout, make sure to read the following important notes:

Important notes: Only certified trained personnel can service the computer. Before replacing any FRU, read the entire page on removing and replacing

FRUs. Carefully remove screws for reuse when replacing FRUs. Be extremely careful during such write operations as copying, saving, or

formatting.Drives in thecomputer thatyouare servicing sequencemight havebeenaltered.Ifyouselectan incorrectdrive,dataorprogramsmightbe overwritten.

Replace an FRU only with another FRU of the correct model.Whenyou replaceanFRU,makesurethatthemachinemodelandtheFRUpartnumberare correctbyreferringtotheFRUpartslist.

An FRU should not be replaced just because of a single, unreproducible failure. Singlefailurescanoccurforavarietyofreasons thathavenothingto dowithahardwaredefect,suchascosmicradiation,electrostaticdischarge,or softwareerrors.ConsiderreplacinganFRUonlywhenaproblemrecurs.Ifyou suspectthatanFRUisdefective,cleartheerrorlogsandrunthetestagain.Ifthe errordoesnotrecur,donotreplacetheFRU.

Be careful not to replace a nondefective FRU.

20

ideapad 700-15ISK/ideapad 700-17ISK Hardware Maintenance Manual

What to do first When you do return an FRU, you must include the following information in the parts exchange form or parts return form that you attach to it: 1. Name and phone number of servicer 2. Date of service 3. Date on which the machine failed 4. Date of purchase 5. Procedure index and page number in which the failing FRU was detected 6. Failing FRU name and part number 7. Machine type, model number, and serial number 8. Customers name and address

Note for warranty: During the warranty period, the customer may be responsible for repair costs if the computer damage was caused by misuse, accident, modification, unsuitable physical or operating environment, or improper maintenance by the customer. The following is a list of some common items that are not covered under warranty and some symptoms that might indicate that the system was subjected to stress beyond normal use. Before checking problems with the computer, determine whether the damage is covered under the warranty by referring to the following list:

The following are not covered under warranty: LCD panel cracked from the application of excessive force or from being

dropped Scratched (cosmetic) parts Distortion, deformation, or discoloration of the cosmetic parts Plastic parts, latches, pins, or connectors that have been cracked or broken

by excessive force Damage caused by liquid spilled into the system Damage caused by the improper insertion of a PC Card or the installation of

an incompatible card Improper disk insertion or use of an optical drive Diskette drive damage caused by pressure on the diskette drive cover,

foreign material in the drive, or the insertion of a diskette with multiple labels Damaged or bent diskette eject button Fuses blown by attachment of a nonsupported device Forgotten computer password (making the computer unusable) Sticky keys caused by spilling a liquid onto the keyboard Use of an incorrect AC adapter on laptop products

The following symptoms might indicate damage caused by nonwarranted activities: Missing parts might be a symptom of unauthorized service or modification. If the spindle of a hard disk drive becomes noisy, it may have been subjected

to excessive force, or dropped.

21

General checkout

Power system checkout

To verify a symptom, follow the steps below: 1. Turn off the computer. 2. Connect the AC adapter. 3. Make sure that power is supplied when you turn on the computer. 4. Turn off the computer. 5. Disconnect the AC adapter. 6. Make sure that the battery pack supplies power when you turn on the

computer.

If you suspect a power problem, see the appropriate power supply checkout: Checking the AC adapter on page 21 Checking operational charging on page 21

Checking the AC adapter You are here because the computer fails only when the AC adapter is used. If the power-on indicator does not turn on, check the power cord of the AC

adapter for correct continuity and installation. If the computer does not charge during operation, go to Checking

operational charging. To check the AC adapter, follow the steps below: 1. Unplug the AC adapter cable from the computer. 2. Measure the output voltage at the plug of the AC adapter cable. See the

following figure:

Note: Output voltage for the AC adapter pin No. 2 may differ from the one you are servicing. 3. If the voltage is not correct, replace the AC adapter. 4. If the voltage is acceptable, do the following: Replace the system board. If the problem persists, go to ideapad 700-15ISK&700-17ISK on page 27. Note: Noise from the AC adapter does not always indicate a defect.

Checking operational charging To check whether the battery charges properly during operation, use a discharged battery pack or a battery pack that has less than 50% of the total power remaining when installed in the computer.

22

ideapad 700-15ISK/ideapad 700-17ISK Hardware Maintenance Manual

Perform operational charging. If the battery status indicator or icon is not lit, remove the battery pack and let it return to room temperature. Reinstall the battery pack. If the charge indicator or icon is still off, replace the battery pack.

If the charge indicator is still not lit, replace the system board.

23

Related service information

Related service information

This chapter presents the following information: Restoring the factory contents by using OneKey Recovery on page 23 Passwords on page 24 Power management on page 25

Restoring the factory contents by using OneKey Recovery

Restore of factory default The Lenovo ideapad 700-15ISK/ideapad 700-17ISK computer comes with pre-installed OneKey Recovery System.In order to save application files and the initial backed up files of the system, the hard disk in a Lenovo computer includes a hidden partition when it is shipped. If you need to restore the system to the point of your first boot up, just enter Lenovo OneKey Recovery System and run System Recovery. For details of OneKey Recovery System, see the User Guide for Lenovo OneKey Recovery system.

Note:Thiswilldeleteallthenewdataonthesystempartition(Cdrive),which isnotrecoverable.Makesuretobackupyourcriticaldatabeforeyouperformthis action.

24

ideapad 700-15ISK/ideapad 700-17ISK Hardware Maintenance Manual

Passwords

As many as three passwords may be needed for any Lenovo computer: the power-on password (POP), the hard disk password (HDP), and the supervisor password. If any of these passwords has been set, a prompt for it appears on the screen whenever the computer is turned on. The computer does not start until the password is entered.

Power-on password A power-on password (POP) protects the system from being powered on by an unauthorized person. The password must be entered before an operating system can be booted.

Hard-disk password There are two hard-disk passwords (HDPs): + User HDP - for the user + Master HDP - for the system administrator, who can use it to get access to the hard disk drive even if the user has changed the user HDP Attention: If the user HDP has been forgotten, check whether a master HDP has been set. If it has, it can be used for access to the hard disk drive. If no master HDP is available, neither Lenovo nor Lenov authorized service technicians provide any services to reset either the user or the master HDP, or to recover data from the hard disk drive. The hard disk drive can be replaced for a scheduled fee.

Supervisor password A supervisor password protects the system information stored in the BIOS. The user must enter the supervisor password to get access to the BIOS and change the system configuration.

Attention: If you forget the password, there is no service procedure to reset the password. The system board must be replaced for a scheduled fee.

25

Related service information

Power management

Note: Power management modes are not supported for an APM operating system.

To reduce power consumption, the computer has two power management modes: screen blank and sleep (standby).

Screen blank state If the time set on the Turn off monitor timer in the operating system expires, the LCD backlight turns off. You can also turn off the LCD backlight by pressing .

To end screen blank state and resume normal operation, press .

Putting the computer to sleep or shutting it down When you have finished working with your computer, you can put it to sleep or shut it down.

Putting your computer to sleep If you will be away from your computer for only a short time, put the computer to sleep. When the computer is in sleep mode, you can quickly wake it to resume use, bypassing the startup process. To put the computer to sleep, do one of the following: Close the display lid. Press the power button. Move the cursor to the lower-left corner, and then select the Start button.

Select Power Sleep.

Note: Put your computer to sleep before you move it. Moving your computer while the hard disk drive is spinning can damage the hard disk, causing loss of data.

To wake the computer, do one of the following: Press any key on the keyboard. Press the power button.

26

ideapad 700-15ISK/ideapad 700-17ISK Hardware Maintenance Manual

Shutting down the computer If you are not going to use your computer for a long time, shut it down. To shut down your computer, do one of the following: Move the cursor to the lower-left corner, and then select the Start button.

Select Power Shut down.

Right-click the Start button in the lower-left corner and select Shut down or sign out Shut down.

27

ideapad 700-15ISK&700-17ISK

ideapad 700-15ISK&700-17ISK

This chapter presents the following product-specific service references and product-specific parts information: Specifications on page 27 Status indicators on page 29 Fn key combinations on page 30 FRU replacement notices on page 31 Removing and replacing an FRU on page 32 Locations on page 58 Parts list on page 60

Specifications The following table lists the specifications of the ideapad 700-15ISK&700- 17ISK: Table 1. Specifications

ideapad 700-15ISK ideapad 700-17ISK Form Factor

Dimensions Appr. 384 mm 265 mm 22.7 mm

Appr. 418 mm 283 mm 25 mm

Weight Appr. 2.3 kg with battery Appr. 2.7 kg with battery LCD size 15.6-inch 17.3-inch

Processor See the system properties of your computer, you can do this as follows: Click Control Panel, then click Hardware and Sound, click Device Manager under Devices and Printers and double click Processors.

Memory Type and speed

DDR4-2133 MHz

Maximum supported capacity

32 GB

Slots SODIMM 2 Hard disk drive

Form factor 2.5-inch, 7 mm

Capacity HDD: 500 GB/1 TB

SSHD: 500 GB+8 GB/1 TB+8 GB SSD: 128 GB/256 GB

Interface SATA 3

28

ideapad 700-15ISK/ideapad 700-17ISK Hardware Maintenance Manual

Table 1. Specifications (continued)

Display Display resolution (LCD) 16:9 (1,920 1,080 pixels) Maximum display resolution on external display device

1,920 1,080 pixels

LCD backlight LED I/O Ports

USB USB 3.0 2, USB 2.0 1 Audio Combo audio jack 1 Communication RJ-45 1 Video/Audio HDMI slot 1 Memory card slot 4 in 1 slot 1 (SD/SDHC/SDXC/MMC)

Battery pack Type Polymer Cells/Capacity 3 Cells, 15 Wh

AC power adapter Input 100-240 V, 50-60 Hz Output voltage 20 V DC Power 135 W

Miscellaneous Camera HD Security Kensington slot 1

29

ideapad 700-15ISK&700-17ISK

Status indicators The system status indicators below show the computer status:

a b

Table 2. Status indicators

Indicator Indicator status Meaning

Battery status indicator

On (solid white) The battery has more than 20% charge.

Solid amber The battery has between 5% and 20% charge.

Fast blinking amber The battery has less than 5% charge.

Slow blinking amber The battery is being charged. When battery charge reaches 20%, the blinking color changes to white.

Slow blinking white

The battery has between 20% and 80% charge and is still charging. When the battery reaches 80% charge the light will stop blinking, but charging will continue until the battery is fully charged.

off The computer is in sleep mode or turned off, and the AC power adapter is unplugged.

Power status indicator

On (solid white) The computer is powered on. Blinking The computer is in sleep mode. Off The computer is powered off.

30

ideapad 700-15ISK/ideapad 700-17ISK Hardware Maintenance Manual

Fn key combinations The following table describes the functions of Fn key combinations.

Table 3. Function key combinations

Fn + Home: Activate the pause function.

Fn + End: Activate the break function.

Fn + PgUp: Enable/Disable the scroll lock.

Fn + PgDn: Activate the system request.

31

ideapad 700-15ISK&700-17ISK

FRU replacement notices

This section presents notices related to removing and replacing parts. Read this section carefully before replacing any FRU.

Screw notices Loose screws can cause a reliability problem. In the Lenovo computer, this problem is addressed with special nylon-coated screws that have the following characteristics: They maintain tight connections. They do not easily come loose, even with shock or vibration. They are harder to tighten.

Do the following when you service this machine: Keep the screw kit in your tool bag. Carefully remove screws for reuse when replacing FRUs. Use a torque screwdriver if you have one.

Tighten screws as follows: Plastic to plastic Turn an additional 90 after the screw head touches the surface of the

plastic part: more than 90

(Cross-section)

Logic card to plastic Turn an additional 180 after the screw head touches the surface of the

logic card: more than 180

(Cross-section)

Torque driver If you have a torque screwdriver , refer to the Torque column for each step. Make sure that you use the correct screws. If you have a torque screwdriver,

tighten all screws firmly to the torque shown in the table. Carefully remove screws for reuse when replacing FRUs. Make sure that all screws are tightened firmly.

Ensure torque screwdrivers are calibrated correctly following country specifications.

32

ideapad 700-15ISK/ideapad 700-17ISK Hardware Maintenance Manual

Removing and replacing an FRU This section presents exploded figures with the instructions to indicate how to remove and replace the FRU. Make sure to observe the following general rules: 1. Do not attempt to service any computer unless you have been trained and

certified. An untrained person runs the risk of damaging parts. 2. Before replacing any FRU, review FRU replacement notices on page 31. 3. Begin by removing any FRUs that have to be removed before the failing

FRU. Any of such FRUs are listed at the top of the page. Remove them in the order in which they are listed.

4. Follow the correct sequence in the steps to remove the FRU, as given in the figures by the numbers in square callouts.

5. When turning a screw to replace an FRU, turn it in the direction as given by the arrow in the figure.

6. When removing the FRU, move it in the direction as given by the arrow in the figure.

7. To put the new FRU in place, reverse the removal procedures and follow any of the notes that pertain to replacement. For information about connecting and arranging internal cables, see Locations on page 57.

8. When replacing an FRU, use the correct screw as shown in the procedures.

DANGER BeforeremovinganyFRU,turnoff thecomputer,unplugallpowercordsfrom electrical outlets, remove thebatterypack, and thendisconnect anyof the interconnectingcables.

Attention: After replacing an FRU, do not turn on the computer until you have made sure that all screws, springs, and other small parts are in place and none are loose inside the computer. Verify this by shaking the computer gently and listening for rattling sounds. Metallic parts or metal flakes can cause electrical short circuits.

Attention: The system board is sensitive to, and can be damaged by, electrostatic discharge. Before touching it, establish personal grounding by touching a ground point with one hand or using an electrostatic discharge (ESD) strap (P/N 6405959) to remove potential shock reasons.

33

ideapad 700-15ISK&700-17ISK

1010 Base cover

Figure 1. Removal steps of base cover

Remove the screws 1. Then remove the base cover 2.

a

a

a

a

a

a

a

a a

aa a

a

b

Step Screw (quantity) Color Torque

1 M2 6 mm, flat-head, nylok-coated (13) Lower to Upper

Black/ Silver

1.85 +/- 0.15 kgf-cm

34

ideapad 700-15ISK/ideapad 700-17ISK Hardware Maintenance Manual

Note: Applying labels to the base cover The new base cover FRU is shipped with a kit containing labels of several kinds. When you replace the base cover, you need to apply the following labels:

The following labels need to be peeled off from the old base cover and put on the new base cover. a Rating label-1(66 x 24 mm) b Rating label-2 (43 x 24 mm) c GML label d Barcode label (40 x 10 mm) e CNC label for Argentina (68 x 6 mm) f MCMC label for Malaysia (8 x 8 mm) g BT label for US/CA/TW or WLAN label for US/CA/TW (32 x 10 mm) h KR KCC label (43 x 24 mm) i Indonesia D side label (26 x 10 mm)or Indonesia postel label (15 x

10 mm) j BIS label for India (40 x 10 mm) k BT label for Israel or WLAN label for Israel(32 x 10 mm) l BRAZIL BT or WLAN label for Brazil (35 x 15 mm)

m WLAN label for South Africa (20 x 10 mm)

For some models, you also need to apply one or two FCC labels. Check the old base cover; if it has one or two FCC labels, find duplicates of them in the label kit and apply them to the new base cover.

For the location of each label, refer to the following figure:

a

d

e

b c

f jg k l mih

35

ideapad 700-15ISK&700-17ISK

1020 Battery pack

For access, remove this FRU: 1010 Base cover on page 33

DANGER Onlyusethebatteryspecifiedinthepartslistforyourcomputer.Anyotherbattery couldigniteorexplode.

Figure 2. Removal steps of battery pack

Unplug the battery connector 1 and remove the screws 2.

a

b b

b

Step Screw (quantity) Color Torque

2 M2 3 mm, flat-head, nylok-coated (3) Bty to Upper

Black 1.85 +/- 0.15 kgf-cm

Hold the battery and slide to the end of right side, then remove it.

When installing: Make sure that the battery connector is attached firmly.

36

ideapad 700-15ISK/ideapad 700-17ISK Hardware Maintenance Manual

1030 Hard disk drive

For access, remove these FRUs in order: 1010 Base cover on page 33 1020 Battery pack on page 35

Attention: Do not drop the hard disk drive or apply any physical shock to it.Thehard

diskdriveissensitivetophysicalshock.Improperhandlingcancausedamages andpermanentlossofdata.

Beforeremovingthedrive,suggestthecustomertobackupalltheinformation onitifpossible.

Neverremovethedrivewhilethesystemisoperatingorisinsuspendmode.

Figure 3. Removal steps of hard disk drive Detach the IO board cable connector in the directions shown by arrows 1 and 2.

b a

Lift the IO board cable.Remove the screws 3.

c

c

Step Screw (quantity) Color Torque

3 M2 3 mm, flat-head, nylok-coated (2) HDD to Upper

Black 1.85 +/- 0.15 kgf-cm

37

ideapad 700-15ISK&700-17ISK

Figure 3. Removal steps of hard disk drive (continued)

Pull the tab to take out the hard disk drive in the direction shown by arrow 4.

d

Remove four screws 5 and detach the metal frame from the hard disk drive.

e

e

e

e

Step Screw (quantity) Color Torque

5 M3.0 4 mm, flat-head, nylokcoated (4) HDD to HDD BRKT

Black 3 +/- 0.3kgfcm

When installing: Make sure that the HDD connector is attached firmly.

38

ideapad 700-15ISK/ideapad 700-17ISK Hardware Maintenance Manual

1040 PCI Express Mini Card for wireless LAN

For access, remove these FRUs in order: 1010 Base cover on page 33 1020 Battery pack on page 35

Important: ThepreinstalledWLANmodulemayonlybereplacedwithaLenovoapproved

moduleinordertocomplywithFCCandICregulations.RefertoOverallon page61forLenovopartnumbersfortheapprovedmodules.

Figure 4. Removal steps of PCI Express Mini Card for wireless LAN

Disconnect the two wireless LAN cables (black, white) 1, and then remove the screw 2.

a a

b

Step Screw (quantity) Color Torque

2 M2 3 mm, flat-head, nylok-coated (1) WLAN card to Upper

Black 1.85 +/- 0.15kgfcm

Remove the card in the direction shown by arrow 3.

c

39

ideapad 700-15ISK&700-17ISK

Figure 4. Removal steps of PCI Express Mini Card for wireless LAN(continued)

In step 1, unplug the jacks by using the removal tool antenna RF connector (P/N: 08K7159), or pick up the connectors with your fingers and gently unplug them in the direction shown by the arrows.

Notes: The wireless LAN card has 2 cables in step 1. The wireless LAN card in some models might have 3 cables in step 1.

When installing: In models with a wireless LAN card that has two antenna connectors, plug

the black cable (1st) (MAIN) into the jack labeled 1, and the white cable (2nd) (AUX) into jack labeled 2 on the card.

In models with a wireless LAN card that has three antenna connectors, plug the black cable (1st) (MAIN) into the jack labeled 1, the grey cable (3rd) into jack labeled 3, and the white cable (2nd) (AUX) into jack labeled 2 on the card.

40

ideapad 700-15ISK/ideapad 700-17ISK Hardware Maintenance Manual

1050 SSD Card(On select models)

For access, remove these FRUs in order: 1010 Base cover on page 33 1020 Battery pack on page 35

Figure 5. Removal steps of SSD Card

Remove the screw 1, and then remove the SSD card in the direction shown by arrow 2.

a

b

Step Screw (quantity) Color Torque

2 M2 3 mm, flat-head, nylok-coated (1) SSD card to Upper

Black 1.85 +/- 0.15kgfcm

41

ideapad 700-15ISK&700-17ISK

1060 DIMM

For access, remove these FRUs in order: 1010 Base cover on page 33 1020 Battery pack on page 35

Figure 6. Removal steps of DIMM

Insert a flat blade tool into the memory module cover, and then remove the memory module cover manually.

Release the two latches on both edges of the socket at the same time in the direction shown by arrows 1, and then unplug the DIMM in the direction shown by arrow 2.

bb

c

When installing: Insert the notched end of the DIMM into the socket. Push the DIMM firmly, and pivot it until it snaps into the place. Make sure that it is firmly fixed in the slot and difficult to be moved.

42

ideapad 700-15ISK/ideapad 700-17ISK Hardware Maintenance Manual

Figure 6. Removal steps of DIMM(continued)

Check the position of the four clips as shown below.

Align the memory module cover with the four clips as shown below.

Make sure that the memory module cover has been engaged in the middle of the four clips as shown below.

43

ideapad 700-15ISK&700-17ISK

Figure 6. Removal steps of DIMM(continued)

Make sure that the memory module cover has been engaged in the middle of the seven clips as shown below.

44

ideapad 700-15ISK/ideapad 700-17ISK Hardware Maintenance Manual

1070 Fan assembly and heat sink assembly

For access, remove these FRUs in order: 1010 Base cover on page 33 1020 Battery pack on page 35

Figure 7. Removal steps of fan assembly and heat sink assembly

Unplug the fan connector in the direction shown by arrow 1, DC-IN connector in the direction shown by arrow 2. Release the cables from the cable guides in the direction shown by arrows. Loosen the screws 3. Remove screws 4.Lift the fan assembly and heat sink assembly in the direction shown by arrow 5. Be careful not to damage the connector.

d d

d

c c c

c c

a

b

e

When installing: Route the antenna cables along the cable guides. As you route the cables, make sure that they are not subjected to any tension. Tension could cause the cables to be damaged by the cable guides, or a wire to be broken.

Make sure that the connectors are attached firmly.

Step Screw (quantity) Color Torque

5 M2 3 mm, flat-head, nylok-coated (3) Fan to Upper

Black 1.85 +/- 0.15 kgfcm

45

ideapad 700-15ISK&700-17ISK

1080 Speakers

For access, remove these FRUs in order: 1010 Base cover on page 33 1020 Battery pack on page 35 1030 Hard disk drive on page 36 1040 PCI Express Mini Card for wireless LAN on page 38 1050 SSD Card(On select models) on page 40 1060 DIMM on page 41 1070 Fan assembly and heat sink assembly on page 44 Figure 8. Removal steps of speakers

Unplug speakers connectors in the directions shown by arrow 1,Peel off the fabric cloth and detach the camera connector in the direction shown by arrows 2 and 3.

a

cb

Lift the speakers in the direction shown by arrows 4.

d

d

When installing: Make sure that the connectors are attached firmly.

46

ideapad 700-15ISK/ideapad 700-17ISK Hardware Maintenance Manual

1090 System board

Important notices for handling the system board: Whenhandlingthesystemboard,bearthefollowinginmind. Becarefulnottodropthesystemboardonabenchtopthathasahardsurface,

suchasmetal,wood,orcomposite. Avoidroughhandlingofanykind. Duringthewholeprocess,makesurenottodroporstackthesystemboard. Ifyouputasystemboarddown,makesuretoput itonlyonapaddedsurface,

suchasanESDmatorconductivecorrugatedmaterial.

For access, remove these FRUs in order: 1010 Base cover on page 33 1020 Battery pack on page 35 1030 Hard disk drive on page 36 1040 PCI Express Mini Card for wireless LAN on page 38 1050 SSD Card(On select models) on page 40 1060 DIMM on page 41 1070 Fan assembly and heat sink assembly on page 44 1080 Speakers on page 45

47

ideapad 700-15ISK&700-17ISK

Figure 9. Removal steps of system board

Remove screws 1. Detach touch pad connector and keyboard connectors in the directions shown by arrows 2 and 3.

a

a

a

c b

When installing: Make sure that all the connectors are attached firmly

Step Screw (quantity) Color Torque

1 M2 3 mm, flat-head, nylok-coated (3) MB to Upper

Black 1.85 +/- 0.15 kgfcm

48

ideapad 700-15ISK/ideapad 700-17ISK Hardware Maintenance Manual

Figure 9. Removal steps of system board (continued)

Remove the system board in the direction shown by arrow 4.

d

a b

c

When installing: When attaching the system board to the base cover, adjust the placement of the USB, HDMI, RJ-45 ports as shown in a , b and c , and make sure that they are attached to the holes on the base cover as shown. Improper placement of those jacks might cause a damage.

49

ideapad 700-15ISK&700-17ISK

1100 Power assembly, Touchpad module and IO board

For access, remove these FRUs in order: 1010 Base cover on page 33 1020 Battery pack on page 35 1030 Hard disk drive on page 36 1040 PCI Express Mini Card for wireless LAN on page 38 1050 SSD Card(On select models) on page 40 1060 DIMM on page 41 1070 Fan assembly and heat sink assembly on page 44 1080 Speakers on page 45 1090 System board on page 46

Figure 10. Removal steps of power assembly, touchpad module and IO board

Remove screws 1, and then remove the power assembly bracket. Remove the power assembly in the direction shown by arrow 2.

aa a

b

Step Screw (quantity) Color Torque

1 M2 6 mm, flat-head, nylok-coated (3) Silver/ Black

1.85+/-0.15 kgfcm

Remove screws 1, and then remove the touchpad module in the direction shown by arrow 2.

a

a

b

Step Screw (quantity) Color Torque

1 M2.5 2.5 mm, flat-head, nylok-coated (2) Blcak 3.0+/-0.3 kgfcm

50

ideapad 700-15ISK/ideapad 700-17ISK Hardware Maintenance Manual

Figure 10. Removal steps of power assembly, touchpad module and IO board (continued)

Remove the IO board in the direction shown by arrow 1.

a

Remove screws 1 and 2, and then remove the hinge cover in the direction shown by arrows 3.

ba

b

a

a

c c

Step Screw (quantity) Color Torque

1 M2.5 2.5 mm, flat-head, nylok-coated (3) Silver 3.0+/-0.3 kgfcm

2 M2.5 6 mm, flat-head, nylok-coated (2) Hinge cover to Upper

Black 3.0+/- 0.3 kgfcm

51

ideapad 700-15ISK&700-17ISK

1110 LCD unit

For access, remove these FRUs in order: 1010 Base cover on page 33 1020 Battery pack on page 35 1030 Hard disk drive on page 36 1040 PCI Express Mini Card for wireless LAN on page 38 1050 SSD Card(On select models) on page 40 1060 DIMM on page 41 1070 Fan assembly and heat sink assembly on page 44 1080 Speakers on page 45 1090 System board on page 46 1100 Power assembly, Touchpad module and IO board on page 49

Figure 11. Removal steps of LCD unit

Remove the screws 1.

a a

a a

Step Screw (quantity) Color Torque

1 M2.5 6 mm, flat-head, nylok-coated (4) Black 3.0 +/- 0.3 kgfcm

52

ideapad 700-15ISK/ideapad 700-17ISK Hardware Maintenance Manual

Figure 11. Removal steps of LCD unit (continued)

Open the hinges 2, then remove the upper case from the LCD unit in the direction shown by arrow 3.

c

b

b

53

ideapad 700-15ISK&700-17ISK

1120 LCD front bezel

For access, remove these FRUs in order: 1010 Base cover on page 33 1020 Battery pack on page 35 1030 Hard disk drive on page 36 1040 PCI Express Mini Card for wireless LAN on page 38 1050 SSD Card(On select models) on page 40 1060 DIMM on page 41 1070 Fan assembly and heat sink assembly on page 44 1080 Speakers on page 45 1090 System board on page 46 1100 Power assembly, Touchpad module and IO board on page 49 1110 LCD unit on page 51

Figure 12. Removal steps of LCD front bezel Remove the LCD front bezel in the direction shown by arrows 1.

a

aa

a

54

ideapad 700-15ISK/ideapad 700-17ISK Hardware Maintenance Manual

1130 LCD panel, LCD cable, LCD bracket and hinges

For access, remove these FRUs in order: 1010 Base cover on page 33 1020 Battery pack on page 35 1030 Hard disk drive on page 36 1040 PCI Express Mini Card for wireless LAN on page 38 1050 SSD Card(On select models) on page 40 1060 DIMM on page 41 1070 Fan assembly and heat sink assembly on page 44 1080 Speakers on page 45 1090 System board on page 46 1100 Power assembly, Touchpad module and IO board on page 49 1110 LCD unit on page 51 1120 LCD front bezel on page 53

Figure 13. Removal steps of LCD panel, LCD cable, LCD bracket and hinges

Remove screws 1.

a

a

a

a

Step Screw (quantity) Color Torque

1 M2.0 x 3 mm, flat-head, nylok-coated(4) Black 1.85+/-0.15 kgfcm

55

ideapad 700-15ISK&700-17ISK

Figure 13. Removal steps of LCD panel, LCD cable and hinges (continued)

Turn over the LCD panel in the direction shown by arrow 2. Disconnect the connector 3,

c

b

When installing: Make sure that the connector is attached firmly.

Remove screws 6 and the hinges in the direction shown by arrows 7.

f f f

f f

f

f

g

g

Step Screw (quantity) Color Torque

1 M2.5 x 2.5 mm, flat-head, nylok-coated(7) Black 3.0+/-0.3 kgfcm

56

ideapad 700-15ISK/ideapad 700-17ISK Hardware Maintenance Manual

1140 Integrated camera

For access, remove these FRUs in order: 1010 Base cover on page 33 1020 Battery pack on page 35 1030 Hard disk drive on page 36 1040 PCI Express Mini Card for wireless LAN on page 38 1050 SSD Card(On select models) on page 40 1060 DIMM on page 41 1070 Fan assembly and heat sink assembly on page 44 1080 Speakers on page 45 1090 System board on page 46 1100 Power assembly, Touchpad module and IO board on page 49 1110 LCD unit on page 51 1120 LCD front bezel on page 53 1130 LCD panel, LCD cable, LCD bracket and hinges on page 54

Figure 14. Removal steps of integrated camera Note: The integrated camera is stuck on the top center of the LCD cover. Unplug the connector 1, remove the integrated camera from the LCD cover in the direction shown by arrow 2.

b a

When installing: Stick the integrated camera to the top center of the LCD cover and adjust the placement of it to make sure the connector is attached firmly.

57

ideapad 700-15ISK&700-17ISK

1150 Antenna assembly and LCD cover

For access, remove these FRUs in order: 1010 Base cover on page 33 1020 Battery pack on page 35 1030 Hard disk drive on page 36 1040 PCI Express Mini Card for wireless LAN on page 38 1050 SSD Card(On select models) on page 40 1060 DIMM on page 41 1070 Fan assembly and heat sink assembly on page 44 1080 Speakers on page 45 1090 System board on page 46 1100 Power assembly, Touchpad module and IO board on page 49 1110 LCD unit on page 51 1120 LCD front bezel on page 53 1130 LCD panel, LCD cable, LCD bracket and hinges on page 54 1140 Integrated camera on page 56

Figure 15. Removal steps of antenna assembly and LCD cover Note: The integrated camera is stuck on the top center of the LCD cover. Peel off the adhesive tapes securing the antenna boards, release the cables from the cable guide, and then remove the antenna assembly in the direction shown by arrows 1.

a

a

When installing: Route the antenna cables along the cable guides and secure the antenna boards with adhesive tapes. As you route the cables, make sure that they are not subjected to any tension. Tension could cause the cables to be damaged by the cable guides, or a wire to be broken.

58

ideapad 700-15ISK/ideapad 700-17ISK Hardware Maintenance Manual

Locations

Front view and right-side view 1 Integrated camera 2 Built-in microphones 3 Wireless LAN antennas 4 Computer display 5 Speakers 6 Touch pad 7 Numeric keypad 8 Power button 9 System status indicators J USB 3.0 port K HDMI port L RJ-45 port

f

d

c

e

ab b

h l

k j

i g

59

ideapad 700-15ISK&700-17ISK

Bottom and Left-side view 1 Ventilation slots 2 Kensington slot 3 AC power adapter jack 4 USB port E Memory card slot 6 Combo audio jack 7 Novo button

a a

b c

d e

f g

60

ideapad 700-15ISK/ideapad 700-17ISK Hardware Maintenance Manual

Parts list This section presents the following service parts: Overall on page 61 LCD FRUs on page 72 Miscellaneous parts on page 74 Screw on page 74 AC adapters on page 75 Power cords on page 76

Notes: EachFRUisavailableforalltypesormodels,unlessspecifictypesormodels

arespecified.

61

ideapad 700-15ISK&700-17ISK

Overall

1

8

6

11

10

5

a

b

2

9

7

c

13

4

12

14

15

3

62

ideapad 700-15ISK/ideapad 700-17ISK Hardware Maintenance Manual

Table 4. Parts listOverall

No. FRU FRU no. CRU ID.

ideapad 700-15ISK

ideapad 700-17ISK

a-c See Miscellaneous parts on page 74.

1 LCD unit (see LCD FRUs on page 72.)

2 Upper CaseW 80RU BK BLNJBL W/KB GK

5CB0L03552 N

2 Upper CaseW 80RUBKBLNJBLW/ KBUSINT'E

5CB0L03549 N

2 Upper CaseW 80RU BK BLNJBL W/KB KO

5CB0L03508 N

2 Upper CaseW 80RU BK BLNJBL W/KB CH

5CB0L03564 N

2 Upper CaseW 80RU BK BLNJBL W/KB RU

5CB0L03485 N

2 Upper CaseW 80RU BK BLNJBLW/KBAR-E

5CB0L03519 N

2 Upper CaseW 80RU BK BLNJBL W/KB HB

5CB0L03501 N

2 Upper CaseW 80RU BK BLNJBL W/KB TI

5CB0L03533 N

2 Upper CaseW 80RU BK BLNJBLW/KBINDIA

5CB0L03513 N

2 Upper CaseW 80RU BK BLNJBL W/KB USA

5CB0L03571 N

2 Upper CaseW 80RU BK BLNJBL W/KB IT

5CB0L03545 N

2 Upper CaseW 80RU BK BLNJBL W/KB SP

5CB0L03506 N

2 Upper CaseW 80RU BK BLNJBL W/KB TR

5CB0L03505 N

2 Upper CaseW 80RU BK BLNJBL W/KB PO

5CB0L03534 N

2 Upper CaseW 80RU BK BLNJBL W/KB LA

5CB0L03514 N

2 Upper CaseW 80RU BK BLNJBLW/KBCF-E

5CB0L03468 N

2 Upper CaseW 80RU BK BLNJBL W/KB ND

5CB0L03555 N

2 Upper CaseW 80RU BK BLNJBL W/KB FR

5CB0L03517 N

2 Upper CaseW 80RU BK BLNJBL W/KB GR

5CB0L03518 N

63

ideapad 700-15ISK&700-17ISK

Table 4. Parts listOverall

No. FRU FRU no. CRU ID.

ideapad 700-15ISK

ideapad 700-17ISK

2 Upper CaseW 80RU BK BLNJBL W/KB NL

5CB0L03530 N

2 Upper CaseW 80RU BK BLNJBL W/KB HG

5CB0L03541 N

2 Upper CaseW 80RU BK BLNJBL W/KB BE

5CB0L03524 N

2 Upper CaseW 80RU BK BLNJBLW/KB ICE

5CB0L03553 N

2 Upper CaseW 80RU BK BLNJBL W/KB SA

5CB0L03493 N

2 Upper CaseW 80RU BK BLNJBL W/KB SW

5CB0L03476 N

2 Upper CaseW 80RU BK BLNJBL W/KB BU

5CB0L03573 N

2 Upper CaseW 80RU BK BLNJBLW/KBCZ-SK

5CB0L03546 N

2 Upper CaseW 80RU BK BLNJBL W/KB BZ

5CB0L03491 N

2 Upper CaseW 80RU BK BLNJBLW/KBFR-AR

5CB0L03492 N

2 Upper CaseW 80RU BK NBLNJBLW/KB GK

5CB0L03471 N

2 Upper CaseW 80RUBKNBLNJBLW/ KUSINT'E

5CB0L03480 N

2 Upper CaseW 80RU BK NBLNJBL W/KB KO

5CB0L03469 N

2 Upper CaseW 80RU BK NBLNJBL W/KB CH

5CB0L03562 N

2 Upper CaseW 80RU BK NBLNJBL W/KB RU

5CB0L03475 N

2 Upper CaseW 80RU BK NBLNJBLW/KBAR-E

5CB0L03540 N

2 Upper CaseW 80RU BK NBLNJBL W/KB HB

5CB0L03566 N

2 Upper CaseW 80RU BK NBLNJBL W/KB TI

5CB0L03559 N

2 Upper CaseW 80RUBK NBLNJBLW/KBINDIA

5CB0L03576 N

2 Upper CaseW 80RU BK NBLNJBL W/KB IT

5CB0L03539 N

64

ideapad 700-15ISK/ideapad 700-17ISK Hardware Maintenance Manual

Table 4. Parts listOverall

No. FRU FRU no. CRU ID.

ideapad 700-15ISK

ideapad 700-17ISK

2 Upper CaseW 80RU BK NBLNJBL W/KB SP

5CB0L03497 N

2 Upper CaseW 80RU BK NBLNJBL W/KB TR

5CB0L03560 N

2 Upper CaseW 80RU BK NBLNJBL W/KB PO

5CB0L03548 N

2 Upper CaseW 80RU BK NBLNJBL W/KB LA

5CB0L03542 N

2 Upper CaseW 80RUBK NBLNJBLW/KB CF-E

5CB0L03512 N

2 Upper CaseW 80RU BK NBLNJBL W/KB ND

5CB0L03477 N

2 Upper CaseW 80RU BK NBLNJBL W/KB FR

5CB0L03547 N

2 Upper CaseW 80RU BK NBLNJBL W/KB GR

5CB0L03489 N

2 Upper CaseW 80RU BK NBLNJBL W/KB NL

5CB0L03487 N

2 Upper CaseW 80RU BK NBLNJBL W/KB HG

5CB0L03529 N

2 Upper CaseW 80RU BK NBLNJBL W/KB BE

5CB0L03528 N

2 Upper CaseW 80RU BK NBLNJBLW/KB ICE

5CB0L03579 N

2 Upper CaseW 80RU BK NBLNJBL W/KB SA

5CB0L03577 N

2 Upper CaseW 80RU BK NBLNJBL W/KB SW

5CB0L03526 N

2 Upper CaseW 80RU BK NBLNJBL W/KB BU

5CB0L03510 N

2 Upper CaseW 80RUBK NBLNJBLW/KBCZ-SK

5CB0L03498 N

2 Upper CaseW 80RU BK NBLNJBL W/KB BZ

5CB0L03522 N

2 Upper CaseW 80RUBK NBLNJBLW/KBFR-AR

5CB0L03502 N

2 Upper CaseW 80RU SR BL JBL W/KB GK

5CB0L03558 N

2 Upper CaseW 80RUSRBLJBLW/KBUS INT'E

5CB0L03509 N

65

ideapad 700-15ISK&700-17ISK

Table 4. Parts listOverall

No. FRU FRU no. CRU ID.

ideapad 700-15ISK

ideapad 700-17ISK

2 Upper CaseW 80RU SR BL JBL W/KB KO

5CB0L03527 N

2 Upper CaseW 80RU SR BL JBL W/KB CH

5CB0L03525 N

2 Upper CaseW 80RU SR BL JBL W/KB RU

5CB0L03554 N

2 Upper CaseW 80RU SR BLJBLW/KB AR-E

5CB0L03483 N

2 Upper CaseW 80RU SR BL JBL W/KB HB

5CB0L03484 N

2 Upper CaseW 80RU SR BL JBL W/KB TI

5CB0L03499 N

2 Upper CaseW 80RU SR BLJBLW/KB INDIA

5CB0L03544 N

2 Upper CaseW 80RU SR BLJBL W/KB USA

5CB0L03570 N

2 Upper CaseW 80RU SR BL JBL W/KB IT

5CB0L03486 N

2 Upper CaseW 80RU SR BL JBL W/KB SP

5CB0L03478 N

2 Upper CaseW 80RU SR BL JBL W/KB TR

5CB0L03561 N

2 Upper CaseW 80RU SR BL JBL W/KB PO

5CB0L03503 N

2 Upper CaseW 80RU SR BL JBL W/KB LA

5CB0L03550 N

2 Upper CaseW 80RU SR BLJBLW/KB CF-E

5CB0L03504 N

2 Upper CaseW 80RU SR BL JBL W/KB ND

5CB0L03531 N

2 Upper CaseW 80RU SR BL JBL W/KB FR

5CB0L03543 N

2 Upper CaseW 80RU SR BL JBL W/KB GR

5CB0L03470 N

2 Upper CaseW 80RU SR BL JBL W/KB NL

5CB0L03568 N

2 Upper CaseW 80RU SR BL JBL W/KB HG

5CB0L03494 N

2 Upper CaseW 80RU SR BL JBL W/KB BE

5CB0L03507 N

66

ideapad 700-15ISK/ideapad 700-17ISK Hardware Maintenance Manual

Table 4. Parts listOverall

No. FRU FRU no. CRU ID.

ideapad 700-15ISK

ideapad 700-17ISK

2 Upper CaseW 80RU SR BLJBL W/KB ICE

5CB0L03556 N

2 Upper CaseW 80RU SR BL JBL W/KB SA

5CB0L03537 N

2 Upper CaseW 80RU SR BL JBL W/KB SW

5CB0L03521 N

2 Upper CaseW 80RU SR BL JBL W/KB BU

5CB0L03474 N

2 Upper CaseW 80RU SR BLJBLW/KB CZ-SK

5CB0L03535 N

2 Upper CaseW 80RU SR BL JBL W/KB BZ

5CB0L03551 N

2 Upper CaseW 80RU SR BLJBLW/KB FR-AR

5CB0L03523 N

2 Upper CaseW 80RU SR NBLJBL W/KB GK

5CB0L03479 N

2 Upper CaseW 80RUSRNBLJBLW/ KBUSINT'E

5CB0L03520 N

2 Upper CaseW 80RU SR NBLJBL W/KB KO

5CB0L03515 N

2 Upper CaseW 80RU SR NBLJBL W/KB CH

5CB0L03532 N

2 Upper CaseW 80RU SR NBLJBL W/KB RU

5CB0L03575 N

2 Upper CaseW 80RU SR NBLJBLW/KB AR-E

5CB0L03569 N

2 Upper CaseW 80RU SR NBLJBL W/KB HB

5CB0L03495 N

2 Upper CaseW 80RU SR NBLJBL W/KB TI

5CB0L03580 N

2 Upper CaseW 80RUSRNBLJBLW/KB INDIA

5CB0L03581 N

2 Upper CaseW 80RU SR NBLJBL W/KB IT

5CB0L03563 N

2 Upper CaseW 80RU SR NBLJBL W/KB SP

5CB0L03500 N

2 Upper CaseW 80RU SR NBLJBL W/KB TR

5CB0L03511 N

2 Upper CaseW 80RU SR NBLJBL W/KB PO

5CB0L03488 N

67

ideapad 700-15ISK&700-17ISK

Table 4. Parts listOverall

No. FRU FRU no. CRU ID.

ideapad 700-15ISK

ideapad 700-17ISK

2 Upper CaseW 80RU SR NBLJBL W/KB LA

5CB0L03557 N

2 Upper CaseW 80RU SR NBLJBLW/KB CF-E

5CB0L03578 N

2 Upper CaseW 80RU SR NBLJBL W/KB ND

5CB0L03572 N

2 Upper CaseW 80RU SR NBLJBL W/KB FR

5CB0L03516 N

2 Upper CaseW 80RU SR NBLJBL W/KB GR

5CB0L03536 N

2 Upper CaseW 80RU SR NBLJBL W/KB NL

5CB0L03473 N

2 Upper CaseW 80RU SR NBLJBL W/KB HG

5CB0L03538 N

2 Upper CaseW 80RU SR NBLJBL W/KB BE

5CB0L03472 N

2 Upper CaseW 80RU SR NBLJBL W/KB ICE

5CB0L03574 N

2 Upper CaseW 80RU SR NBLJBL W/KB SA

5CB0L03481 N

2 Upper CaseW 80RU SR NBLJBL W/KB SW

5CB0L03490 N

2 Upper CaseW 80RU SR NBLJBL W/KB BU

5CB0L03482 N

2 Upper CaseW 80RUSR NBLJBLW/KB CZ-SK

5CB0L03565 N

2 Upper CaseW 80RU SR NBLJBL W/KB BZ

5CB0L03496 N

2 Upper CaseW 80RUSR NBLJBLW/KB FR-AR

5CB0L03567 N

2 Upper Case W 80RU BK BL NJBLW/KBUS

5CB0K85908 N

2 Upper Case W 80RU BK BL NJBLW/KBJP

5CB0K85904 N

2 Upper Case W 80RU BK BL NJBLW/KBUK

5CB0K85907 N

2 Upper Case W 80RU BK NBLNJBLW/KBUS

5CB0K85929 N

2 Upper Case W 80RU BK NBLNJBLW/KBJP

5CB0K85920 N

2 Upper Case W 80RU BK NBLNJBLW/KBUK

5CB0K85937 N

68

ideapad 700-15ISK/ideapad 700-17ISK Hardware Maintenance Manual

Table 4. Parts listOverall

No. FRU FRU no. CRU ID.

ideapad 700-15ISK

ideapad 700-17ISK

2 Upper Case W 80RU SR BL JBL W/KBUS

5CB0K85916 N

2 Upper Case W 80RU SR BL JBL W/KBJP

5CB0K85912 N

2 Upper Case W 80RU SR BL JBL W/KBUK

5CB0K85926 N

2 Upper Case W 80RU SR NBL JBLW/KBUS

5CB0K85928 N

2 Upper Case W 80RU SR NBL JBLW/KBJP

5CB0K85941 N

2 Upper Case W 80RU SR NBL JBLW/KBUK

5CB0K85903 N

3 MB W 80RU WIN I36100H N16PGT 2G

5B20K91443 N

3 MB W 80RU WIN I36100H N16PGT 4G

5B20K91446 N

3 MB W 80RU WIN I56300H N16PGT 2G

5B20K91445 N

3 MB W 80RU WIN I56300H N16PGT 4G

5B20K91447 N

3 MB W 80RU WIN I76700H N16PGT 2G

5B20K91442 N

3 MB W 80RU WIN I76700H N16PGT 4G

5B20K91444 N

3 MB W 80RU NOK I36100H 2G DIS

5B20L07081 N

3 MB W 80RU NOK I36100H 4G DIS

5B20L07083 N

3 MB W 80RU NOK I56300H 2G DIS

5B20L07080 N

3 MB W 80RU NOK I56300H 4G DIS

5B20L07082 N

3 MB W 80RU NOK I76700H 2G DIS

5B20L07084 N

3 MB W 80RU NOK I76700H 4G DIS

5B20L07085 N

4 SSD,128GB PM951 M.2 PCIE,Samsung MZVLV128HCGR 128GB M.2 PCIE SSD

5SD0J46480

N

4 SSD,256GB PM951 M.2 PCIE,Samsung MZVLV256HCHP 256GB M.2 PCIE SSD

5SD0J46479

N

5 WLAN,Intel 1x1AC+BT4.0,Intel 3165 1x1AC+BT PCIE M.2 WLAN

SW10H24486

N

69

ideapad 700-15ISK&700-17ISK

Table 4. Parts listOverall

No. FRU FRU no. CRU ID.

ideapad 700-15ISK

ideapad 700-17ISK

5 WLAN,1x1AC+BT4.0,Cbt BCM43162 1x1AC+BT4.0 PCIE M.2 WLAN V2

SW10A11586 N

5 WLAN,1x1AC+BT4.0,Cbt RTL8821AE 1x1AC+BT4.0 PCIE M.2 WLAN

SW10A11648

N

5 WLAN,1x1AC+BT4.0,Ltn NFA435 1x1AC+BT4.0 PCIE M.2 WLAN

SW10A11641 N

6 Thermal Module W 80RU DIS W/FAN

5H40K85913 N

7 HDD,500G 5400rpm,ST500LT012 6G 7mm 5.4K 500G HDD

16200383 N

7 HDD,500G 5400rpm, HTS545050A7E660 6G 7mm 5.4K 500G HDD

5H20H14223 N

7 HDD,500G 5400rpm,MQ01ABF050 6G 7mm 5.4K 500G HDD

16200433 N

7 HDD,500G 5400rpm,WD5000LPCX- 24VHAT0 7mm 5400rpm 500G HDD

5H20J35762

N

7 HDD,1T 5400rpm, HTS541010A7E630 7mm 1T HDD

16200658 N

7 HDD,1T 5400rpm,WD10SPCX- 24HWST1 6G 7mm 1T HDD

16200554

N

7 HDD,1T 5400rpm,MQ02ABF 7mm 1T HDD

5H20G09709 N

7 HDD,500G+8G Hybrid,ST500LM000 6G 7mm 500G+8G SSHD

5H20H24608 N

7 HDD,500G+8G Hybrid,Toshiba MQ02ABF050H 7mm 5.4k 500GB+8GB SSHD

5H20H12631

N

7 HDD,1T+8G Hybrid,WD10S21X- 24R1BT0 7mm 5400rpm 1TB+8G SSHD

16200681

N

70

ideapad 700-15ISK/ideapad 700-17ISK Hardware Maintenance Manual

Table 4. Parts listOverall

No. FRU FRU no. CRU ID.

ideapad 700-15ISK

ideapad 700-17ISK

8 Memory,DDR4 2133 4GB,M471A5143DB0- CPB 4GB DDR4 2133

5M30H35724 N

8 Memory,DDR4 2133 4GB,HMA451S6AFR8N- TFN0 4GB DDR4 2133

5M30H35732 N

8 Memory,DDR4 2133 4GB,4GB DDR4 S MTA8ATF51264HZ- 2G1A2

5M30K59777

N

8 Memory,DDR4 2133 8GB,M471A1G43DB0- CPB 8GB DDR4 2133

5M30H35727 N

8 Memory,DDR4 2133 8GB,HMA41GS6AFR8N- TFN0 8GB DDR4 2133

5M30H35726 N

8 Memory,DDR4 2133 8GB,8GB DDR4 S MTA16ATF1G64HZ- 2G1A2

5M30K59784

N

8 Memory,DDR4 2133 16GB,16GB D4 S M471A2K43BB1-CPB

5M30H35729 N

8 Memory,DDR4 2133 16GB,16GB D4 S HMA82GS6MFR8N-TFN0

5M30H35728 N

8 Memory,DDR4 2133 16GB,16GB D4 S MTA16ATF2G64HZ- 2G1A1

5M30H35730

N

9 IO Board W 80RU W/ Cable

5C50K85909 N

10 DC-IN Cable W 80RU 5C10K85921 N 11 Speaker W 80RU R+L

NJBL 5SB0K85910 N

12 Battery,11.1V 45Wh3cell bty,Y41 SP/A L14M3P24 11.1V45Wh3cell bty

'5B10H41181 N

12 Battery, 11.1V 45Wh3cell bty,Y41 SP/C L14M3P24 11.1V45Wh3cell bty

5B10H41180 N

12 Battery, 11.1V 45Wh3cell bty,Y41 SY L14S3P24 11.1V45Wh3cell bty

5B10H52788 N

71

ideapad 700-15ISK&700-17ISK

Table 4. Parts listOverall

No. FRU FRU no. CRU ID.

ideapad 700-15ISK

ideapad 700-17ISK

13 Click pad,104*69,TM03105-001

'5T60H46521 N

13 Click pad,104*69,KGDFF0118A

5T60G97154 N

13 Touch pad Module W 80RU BKW/Cable

5T60K85917 N

13 Touch pad Module W 80RU WHW/Cable

5T60K85922 N

14 Hinge Cover W 80RU Black

5CB0K85911 N

14 Hinge Cover W 80RU Silver

5CB0K85905 N

15 Lower Case W 80RU Black

5CB0K85925 N

15 Lower Case W 80RU White

5CB0K85906 N

72

ideapad 700-15ISK/ideapad 700-17ISK Hardware Maintenance Manual

LCD FRUs In Lenovo ideapad 700-15ISK/ideapad 700-17ISK, there are following types of LCDs.

15.6 -in. HD TFT 17.3 -in. HD TFT

1

5

4

3

6

2

73

ideapad 700-15ISK&700-17ISK

15.6-in. HD TFT Table 5. Parts list15.6-in. HD TFT

No. FRU FRU no. CRU ID.

1 LCD Bezel W 80RU Black 5B30K85938 N 1 LCD Bezel W 80RU White 5B30K85934 N 2 Panel, FHD-AG eDP 4.0t

IPS, LGD LP156WF6- SPK1 FHD AG S NB

5D10H34772 N

2 Panel, FHD-AG eDP 4.0t IPS, SDC LTN156HL09-401 FHD AG S NB

5D10H29267

N

2 Panel, FHD-AG eDP 4.0t IPS, BOE NV156FHM-N42 FHD AG S NB

5D10H32287 N

3 Hinge W 80RU R+L 5H50K85932 N 4 Camera, HD with 2MIC,

BIS BNC416YTK HD NB camera

5C20G89272 N

4 Camera, HD with 2MIC, BIS BNC416YS7 HD NB camera

5C20G89268 N

4 Camera, HD with 2MIC, AVC HAA-6D0F03 HD NB camera

5C20G89276 N

4 Camera, HD with 2MIC, CCY CNFEH39 HD NB camera

5C20G89264 N

4 Camera W S41-70 HD W/2MIC

5C20J32317 N

5 LCD Cover W 80RU Black W/ANTENNA

5CB0K85923 N

5 LCD Cover W 80RU White W/ANTENNA

5CB0K85901 N

6 LCD Cable W 80RU 5C10K85944 N

74

ideapad 700-15ISK/ideapad 700-17ISK Hardware Maintenance Manual

Miscellaneous parts Table 6. Parts listMiscellaneous parts

FRU P/N CRU ID.

ideapad 700-15ISK

ideapad 700-17ISK

System miscellaneous parts: (a) HDD Bracket W 80RU (b) DC-IN Bracket W 80RU (c) DIMM EMI SHIELDING W

80RU

5B40K85930 5B40K85942 5S60K85899

N N N

Note: Italicized letters in parentheses are references to the exploded view in Overall on page 61.

Screw Table 7. Parts listscrews

FRU P/N CRU ID.

ideapad 700-15ISK

ideapad 700-17ISK

Screw Pack W 80QRU 5S10K85939 N

75

ideapad 700-15ISK&700-17ISK

AC adapters Table 8. Parts listAC adapters

FRU P/N CRU ID.

ideapad 700-15ISK

ideapad 700-15ISK

Adapter, 135W, Delta ADL135NDC3A 20V6.75A BIS

5A10J46690 *

Adapter, 135W, Liteon ADL135NLC3A 20V6.75A AD BIS

5A10J75112 *

76

ideapad 700-15ISK/ideapad 700-17ISK Hardware Maintenance Manual

Power cords A Lenovo power cord for a specific country or region is usually available only in that country or region: Table 9. Parts list3-pin power cords

Region P/N CRU ID.

CCC LINETEK PC323+RVV300/300+LS15 1m

145000600 * Argentina LINETEK LS15+H03VV-F+LP39 1m

145000599 * Denmark LINETEK LS15+H03VV-F+LP-38 1m

145000598 * Switzerland LINETEK LS15+H03VV-F+LP-37 1m

145000597 * Brazil LINETEK LS15 H03VV-F LP26A 1m

145000596 * Israel LINETEK LS15+H03VV-F+LP-41 1m

145000595 * UL LINETEK LP-30B + SPT-2 + LS15 1m

145000594 * UK LINETEK LP-61L+ H03VV-F+ LS15 1m

145000593 * Indian LINETEK PE-361+ H05VV-F+ LS15 1m

145000592 * Italy LINETEK LS15+H03VV-F+PE-336 1m

145000591 * Korea LINETEK LS15+H05VV-F+LP-E04A 1m

145000590 * Australia LINETEK LS15+H03VV-F+LP-23A 1m

145000589 * Taiwan LINETEK LS15+VCTF+LP-53 1m

145000588 * Japan LINETEK LS15+VCTF+LP-54 1m

145000587 * Africa LINETEK LS15+H03VV-F+PE-364 1m

145000586 * CE LINETEK LP-34+H03VV-F + LS15 1m

145000585 * CCC Longwell LSG-31+RVV300/300+LS-18 1m

145000568 * Argentina Longwell LP-24+H03VV-F+LS-18 1m

145000567 * Denmark Longwell LP-40+H03VV-F+LS-18 1m

145000566 * Switzerland Longwell LP-37+H03VV-F+LS-18 1m

145000565 * Brazil Longwell LP-46+H03VV-F+LS-18 1m

145000564 *

77

ideapad 700-15ISK&700-17ISK

Region P/N CRU ID.

Israel Longwell LP-41+H03VV-F+LS-18 1m

145000563 * UL Longwell LP-30B+SPT-2 18AWG+LS-18 1m

145000562 * UK Longwell LP-61L+H03VV-F+LS-18 1m

145000561 * Indian Longwell LP-67+BIS+LS-18 1m

145000560 * Italy Longwell LP-22+H03VV-F+LS-18 1m

145000559 * Korea Longwell LP-486+KTLH03VV-F+LS-5 1m

145000558 * Australia Longwell LP-23A+LFC-3R+LS-18 1m

145000557 * Taiwan Longwell LP-71+VCTF+LS-33 1m

145000556 * Japan Longwell LP-54+VCTF+LS-18 1m

145000555 * Africa Longwell LP-39+H03VV-F+LS-18 1m

145000554 * CE Longwell LP-34A+H03VV-F+LS-18 1m

145000553 * CCC VOLEX GB10S3+RVV 300/500+VAC5S 1m

145000538 * UL Volex US15S3+SPT-2 +VAC5S 1m

145000537 * Italy VOLEX IT10S3+HO3VV-F+VAC5S 1m

145000535 * Denmark VOLEX MP233D+H03VV-F+VAC5S 1m

145000534 * Korea VOLEX M2511+KETI IEC+VAC5S 1m

145000533 * Australia VOLEX AU10S3+H03VV-F+VAC5S 1m

145000532 * Taiwan VOLEX TW15CS3+VCTF+VAC5S 1m

145000531 * Japan VOLEX VAC5S+VCTF+M755 1m

145000530 * Argentina VOLEX VA2073+H03VV-F+VAC5S 1m

145000528 * Brazil VOLEX CH10S3+H03VV-F+VAC5S 1m

145000527 *

Table 9. Parts list3-pin power cords (continued)

78

ideapad 700-15ISK/ideapad 700-17ISK Hardware Maintenance Manual

Region P/N CRU ID.

CE VOLEX M2511+HO3VV-F+VAC5S 1m

145000525 * Switzerland VOLEX MP232+H03VV-F+VAC5S 1m

145000524 * UK VOLEX MP5004+H03VV-F+VAC5S 1m

145000605 * UK lux 0031+H03VV-F 0.75/3C+0011 1m

145500000 * CE lux 0033+H03VV-F 0.75/3C+0011 1m

145500001 * UL lux 0014+SPT-2 60C 18/3C+0016 1m

145500002 * CCC lux 0036+RVV 300/300 0.75/3C+0002 1m

145500003 * Indian lux 0046+IS694 0.75/3C+0011 1m

145500004 * Japan lux 0018(E)+VCTF 0.75/3C+0021 1m

145500005 * Australia lux 0038+H03VV-F 0.75/3C+0011 1m

145500006 * Taiwan lux 0019+VCTF 0.75/3C+0021 1m

145500007 * Korea lux 0033+H03VV-F 0.75/3C+0011 1m

145500008 * Italy lux 0029+H03VV-F 0.75/3C+0011 1m

145500009 * Africa lux 0044+H03VV-F 0.75/3C+0011 1m

145500010 * Brazil lux 0034+H03VV-F 0.75/3C+0011 1m

145500011 * Israel lux 0041+H03VV-F 0.75/3C+0011 1m

145500012 * Switzerland lux 0027+H03VV-F 0.75/3C+0011 1m

145500013 * Denmark lux 0048+H03VV-F 0.75/3C+0011 1m

145500014 * Argentina lux 0040+H03VV-F 0.75/3C+0011 1m

145500015 *

Table 9. Parts list3-pin power cords (continued)

79

Notices

Notices

Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any Lenovo intellectual property right may be used instead. However, it is the users responsibility to evaluate and verify the operation of any other product, program, or service. Lenovo may have patents or pending patent applications covering subject matter described in this document. The furnishing of this document does not give you any license to these patents.

LENOVO GROUP LTD. PROVIDES THIS PUBLICATION AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON- INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some jurisdictions do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you. This information could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in new editions of the publication. Lenovo may make improvements and/or changes in the product(s) and/or the program(s) described in this publication at any time without notice. The products described in this document are not intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. The information contained in this document does not affect or change Lenovo product specifications or warranties. Nothing in this document shall operate as an express or implied license or indemnity under the intellectual property rights of Lenovo or third parties. All information contained in this document was obtained in specific environments and is presented as an illustration. The result obtained in other operating environments may vary. Lenovo may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you. Any references in this publication to non-Lenovo Web sites are provided for convenience only and do not in any manner serve as an endorsement of those Web sites. The materials at those Web sites are not part of the materials for this Lenovo product, and use of those Web sites is at your own risk.

80

ideapad 700-15ISK/ideapad 700-17ISK Hardware Maintenance Manual

Any performance data contained herein was determined in a controlled environment. Therefore, the result obtained in other operating environments may vary significantly. Some measurements may have been made on development-level systems and there is no guarantee that these measurements will be the same on generally available systems. Furthermore, some measurements may have been estimated through extrapolation. Actual results may vary. Users of this document should verify the applicable data for their specific environment.

Trademarks The follow

Manualsnet FAQs

If you want to find out how the IdeaPad 700-17ISK Lenovo works, you can view and download the Lenovo IdeaPad 700-17ISK Laptop Hardware Maintenance Manual on the Manualsnet website.

Yes, we have the Hardware Maintenance Manual for Lenovo IdeaPad 700-17ISK as well as other Lenovo manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Hardware Maintenance Manual should include all the details that are needed to use a Lenovo IdeaPad 700-17ISK. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Lenovo IdeaPad 700-17ISK Laptop Hardware Maintenance Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Lenovo IdeaPad 700-17ISK Laptop Hardware Maintenance Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Lenovo IdeaPad 700-17ISK Laptop Hardware Maintenance Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Lenovo IdeaPad 700-17ISK Laptop Hardware Maintenance Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Lenovo IdeaPad 700-17ISK Laptop Hardware Maintenance Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.