Contents

KORG AW-LT100G Owner's Manual PDF

1 of 8
1 of 8

Summary of Content for KORG AW-LT100G Owner's Manual PDF

- 1 -

Precautions Location Using the unit in the following locations can result in a malfunction. In direct sunlight Locations of extreme temperature or humidity Excessively dusty or dirty locations Locations of excessive vibration Close to magnetic fields

Power supply Be sure to turn off the power when the unit is not in use. Remove the battery in order to prevent it from leaking when the unit is not in use for extended periods.

Interference with other electrical devices Radios and televisions placed nearby may experience reception interference. Operate this unit at a suitable distance from radios and televisions.

Handling To avoid breakage, do not apply excessive force to the switches or controls.

Care If the exterior becomes dirty, wipe it with a clean, dry cloth. Do not use liquid clean- ers such as benzene or thinner, or cleaning compounds or flammable polishes.

Keep this manual After reading this manual, please keep it for later reference.

Keeping foreign matter out of your equipment Never set any container with liquid in it near this equipment. If liquid gets into the equipment, it could cause a breakdown, fire, or electrical shock. Be careful not to let metal objects get into the equipment.

THE FCC REGULATION WARNING (for USA) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. If items such as cables are included with this equipment, you must use those included items. Unauthorized changes or modification to this system can void the users au- thority to operate this equipment.

Notice regarding disposal (EU only) If this symbol is shown on the product, manual, battery, or package, you must dispose of it in the correct manner to avoid harm to human health or damage to the environment. Contact your local administra- tive body for details on the correct disposal method. If the battery con- tains heavy metals in excess of the regulated amount, a chemical sym- bol is displayed below the symbol on the battery or battery package.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAN ICES-3 B / NMB-3 B.

IMPORTANT NOTICE TO CONSUMERS This product has been manufactured according to strict specifications and voltage requirements that are applicable in the country in which it is intend- ed that this product should be used. If you have purchased this product via the internet, through mail order, and/or via a telephone sale, you must verify that this product is intended to be used in the country in which you reside. WARNING: Use of this product in any country other than that for which it is intended could be dangerous and could invalidate the manufacturers or dis- tributors warranty. Please also retain your receipt as proof of purchase otherwise your product may be disqualified from the manufacturers or distributors warranty.

* All product names and company names are the trademarks or registered trademarks of their respective owners.

PHS 10:00 17:00

168-00731-18-162F 1. 2.

AW-LT100G AW-LT100B

Published 5/2017 Printed in Vietnam

Thank you for purchasing the Korg AW-LT100G/AW-LT100B Clip- on Tuner. To help you get the most out of your new instrument, please read this manual carefully.

Merci davoir choisi la Clip-on Tuner AW-LT100G/AW-LT100B de Korg. Afin de pouvoir exploiter au mieux toutes les possibilits offertes par linstrument, veuillez lire attentivement ce manuel.

Vielen Dank, dass Sie sich fr einen AW-LT100G/AW-LT100B Clip- on Tuner von Korg entschieden haben. Bitte lesen Sie sich diese Anleitung vollstdig durch, um bei der Bedienung alles richtig zu machen.

Gracias por comprar el afinador para enchufar AW-LT100G/ AW-LT100B Clip-on Tuner de Korg. Por favor, lea este manual atentamente y gurdelo para futuras consultas.

Clip-on Tuner AW-LT100G/AW-LT100B

Owners Manual (p.2) Manuel dutilisation (p.5)

Bedienungsanleitung (s.6) Manual de usuario (p.7)

(p.8)

- 2 -

Parts of the AW-LT100G/AW-LT100B

Battery compartment (Rear)

Battery indicator Meter

Note name indicatorReference pitch indicator Right shuttle switchLeft shuttle switch

Installing the battery When the battery becomes depleted, a battery indicator ( ) will appear on the display. Immediately replace the battery with a new one.

1. Open the battery compartment cover on the rear of the tuner in the direction of the arrow.

2. Insert the battery, making sure to observe the correct polarity, and then close the cover.

Attaching to the instrument and range of motion The AW-LT100G/AW-LT100B tunes by picking up the vibrations of the in- strument. Therefore, attach the AW-LT100G/AW-LT100B to the headstock of your instrument in order to tune it. Additionally, the AW-LT100G/AW- LT100B can be freely moved so that the display is easy to read.

The AW-LT100G/AW-LT100B may be damaged if you apply excessive force within its range of motion, or attempt to move it beyond its in- tended range of motion.

20

100 20

340 180

Please carefully attach the AW-LT100G/AW-LT100B to your instrument. Leaving the AW-LT100G/AW-LT100B attached for a long time may damage or mark the instrument's surface. Depending on various factors such as age-related change or the sur- face finish, there is a possibility that your instrument may be damaged by attaching this product.

Tuning Tuning procedure 1. Turn the left shuttle switch upward. Each time you turn the shuttle

switch, the AW-LT100G/AW-LT100B will be turned on or off. If the power is left on for approximately 3 minutes without any user input, it will turn off automatically (Auto power-off function).

2. If necessary, change the reference pitch (calibration) and meter mode. 3. Play a single note on your instrument.

The note name closest to the detected pitch appears in the note name indicator. Check that the correct note name appears in the display, and then tune your instrument while watching the meter. The tuning indications differ depending on the selected meter mode setting. Even if the pitch is within the range of detection, it may not be possible to detect the pitch of an instrumental sound that contains large num- bers of overtones or a sound that has a rapid decay. The meter may respond to vibrations it picks up from the environ- ment.

Reference pitch settings (calibration) (*M) Each time you turn the right shuttle switch upward (or downward), the reference pitch (calibration value) increases (or decreases) in 1 Hz steps.

Setting the meter mode (*M) Each time you turn the left shuttle switch downward, the meter mode changes.

Regular Strobe Half strobe Regular ...

1: Regular meter Tune your instrument until the meter segments up to the center ( ) light up. If the pitch is sharp, meter segments up to the right of the center light up. If the pitch is flat, meter segments to the left of the center light up.

The pitch is flat. In tune. The pitch is sharp.

2: Strobe meter Tune your instrument until the meter segments stop running. Since the strobe meter has higher precision, it allows you to tune with greater accuracy. The illumination will flow from left to right if the note is sharp, or from right to left if the note is flat.

The pitch is flat. In tune. The pitch is sharp.

3: Half-strobe meter Tune your instrument until the meter segment at the center ( ) lights up. If the pitch is sharp, meter segments to the right of the cen- ter light up. If the pitch is flat, meter segments to the left of the center light up.

The pitch is flat. In tune. The pitch is sharp.

Backlight After turning the left shuttle switch upward to turn on the AW- LT100G/AW-LT100B, you can change the brightness of the display by keeping the left shuttle switch turned upward for approximately 2 seconds. Auto : The backlight will light brightly when sound is inputted or when a shuttle switch is operated. When there has been no sound in- put or shuttle switch operation for approximately three seconds after the power has been turned on, the backlight will turn off in order to prevent the battery from being depleted. Soft : The backlight will light at a lower level of brightness in order to prevent the battery from being depleted.

Specifications Scale: 12-note equal temperament Range (sine wave): AW-LT100G B1 (61.74 Hz)E6 (1319 Hz) AW-LT100B E0 (20.60 Hz)C5 (523.3 Hz) Precision: +/-0.1 cent Reference pitch: A4 = 436445 Hz (1 Hz steps) Dimensions (W x D x H): 60 mm x 60 mm x 55 mm / 2.36 x 2.36 x 2.17 Weight: 32 g/1.13 oz. (including battery) Power supply: One AAA Battery Battery life: approximately 100 hours (backlight:Soft, tuner continuously operating, A4

input, when using alkaline battery) Included items: Owners manual, One AAA battery

*M Settings are remembered even when the power is off.

Specifications and appearance are subject to change without no- tice for improvement.

- 3 -

1. 1 2.

3

3. This warranty is valid only in Japan.

4.

5.

6.

Prcautions Emplacement Lutilisation de cet instrument dans les endroits suivants peut en entraner le mau- vais fonctionnement. En plein soleil. Endroits trs chauds ou trs humides. Endroits sales ou fort poussireux. Endroits soumis de fortes vibrations. A proximit de champs magntiques.

Alimentation Lorsque vous nutilisez pas lappareil, noubliez pas de le mettre hors tension. Re- tirez les piles pour viter toute fuite lorsque lappareil ne sera pas utilis pendant de longues priodes de temps.

Interfrences avec dautres appareils lectriques Les postes de radio et de tlvision situs proximit peuvent par consquent souffrir dinterfrences la rception. Veuillez ds lors faire fonctionner cet ap- pareil une distance raisonnable de postes de radio et de tlvision.

Maniement Pour viter de les endommager, manipulez les commandes et les boutons de cet instrument avec soin.

Entretien Lorsque linstrument se salit, nettoyez-le avec un chiffon propre et sec. Ne vous servez pas dagents de nettoyage liquides tels que du benzne ou du diluant, voire des produits inflammables.

Conservez ce manuel Aprs avoir lu ce manuel, veuillez le conserver soigneusement pour toute rf- rence ultrieure.

Evitez toute intrusion dobjets ou de liquide Ne placez jamais de rcipient contenant du liquide prs de linstrument. Si le liquide se renverse ou coule, il risque de provoquer des dommages, un court-cir- cuit ou une lectrocution. Veillez ne pas laisser tomber des objets mtalliques dans le botier (trombones, par ex.).

Note concernant les dispositions (Seulement EU)

Si ce symbole apparait sur le produit, le manuel, les piles ou les packs de piles, cela signifi e que vous devez le recycler dune manire correcte afi n de prvenir les dommages pour la sant humaine et les dommages potentiels pour lenvironnement. Contactez votre administration locale pour de plus amples renseignements concernant la bonne mthode de recyclage. Si la pile contient des mtaux lourds au-del du seuil rgle- ment, un symbole chimique est affi ch en dessous du symbole de la

poubelle barre dune croix sur la pile ou le pack de piles.

REMARQUE IMPORTANTE POUR LES CLIENTS Ce produit a t fabriqu suivant des spcifi cations svres et des besoins en tension applicables dans le pays o ce produit doit tre utilis. Si vous avez achet ce produit via linternet, par vente par correspondance ou/et vente par tlphone, vous devez vrifi er que ce produit est bien utilisable dans le pays o vous rsidez. ATTENTION: Lutilisation de ce produit dans un pays autre que celui pour lequel il a t conu peut tre dangereuse et annulera la garantie du fabricant ou du distributeur. Conservez bien votre rcpiss qui est la preuve de votre achat, faute de quoi votre produit risque de ne plus tre couvert par la garan- tie du fabricant ou du distributeur.

* Tous les noms de produits et de socits sont des marques commerciales ou dposes de leur dtenteur respectif.

- 4 -

Vorsichtsmanahmen Aufstellungsort Vermeiden Sie das Aufstellen des Gerts an Orten, an denen. es direkter Sonneneinstrahlung ausgesetzt ist; hohe Feuchtigkeit oder Extremtemperaturen auftreten knnen; Staub oder Schmutz in groen Mengen vorhanden sind; das Gert Erschtterungen ausgesetzt sein kann. in der Nhe eines Magnetfeldes.

Stromversorgung Stellen Sie den Netzschalter auf OFF, wenn das Gert nicht benutzt wird. Wenn Sie das Gert ber einen lngeren Zeitraum nicht benutzen, nehmen Sie die Batterien heraus, damit sie nicht auslaufen.

Streinflsse auf andere Elektrogerte Dieser kann bei in der Nhe aufgestellten Rundfunkemp-fnger oder Fernsehge- rten Empfangsstrungen hervorrufen. Betreiben Sie solche Gerte nur in einem geeigneten Abstand von diesem Erzeugnis.

Bedienung Vermeiden Sie bei der Bedienung von Schaltern und Reglern unangemessenen Kraftaufwand.

Reinigung Bei auftretender Verschmutzung knnen Sie das Gehuse mit einem trockenen, sauberen Tuch abwischen. Verwenden Sie keinerlei Flssigreiniger wie beispiels- weise Reinigungsbenzin, Verdnner- oder Splmittel. Verwenden Sie niemals brennbare Reiniger.

Bedienungsanleitung Bewahren Sie diese Bedienungsanleitung gut auf, falls Sie sie spter noch einmal bentigen.

Flssigkeiten und Fremdkrper Stellen Sie niemals Behltnisse mit Flssigkeiten in der Nhe des Gerts auf. Wenn Flssigkeit in das Gert gelangt, knnen Beschdigung des Gerts, Feuer oder ein elektrischer Schlag die Folge sein. Beachten Sie, dass keinerlei Fremd- krper in das Gert gelangen.

Hinweis zur Entsorgung (Nur EU) Wenn Sie das Symbol mit der durchgekreuzten Mlltonne auf Ihrem Produkt, der dazugehrigen Bedienungsanleitung, der Batterie oder der Verpackung sehen, mssen Sie das Produkt in der vorgeschriebe- nen Art und Weise entsorgen um Schden an der menschlichen Ge- sundheit und der Umwelt zu vermeiden. Batterien oder Akkus, die Schadstoffe enthalten, sind auch mit dem Symbol einer durchgekreuzten Mlltonne gekennzeichnet. In der

Nhe zum Mlltonnensymbol befi ndet sich die chemische Bezeichnung des Schadstoffes.

WICHTIGER HINWEIS FR KUNDEN Dieses Produkt wurde unter strenger Beachtung von Spezifikationen und Spannungsanforderungen hergestellt, die im Bestimmungsland gelten. Wenn Sie dieses Produkt ber das Internet, per Postversand und/oder mit telefoni- scher Bestellung gekauft haben, mssen Sie besttigen, dass dieses Produkt fr Ihr Wohngebiet ausgelegt ist. WARNUNG: Verwendung dieses Produkts in einem anderen Land als dem, fr das es bestimmt ist, verwendet wird, kann gefhrlich sein und die Garantie des Herstellers oder Importeurs hinfllig lassen werden. Bitte bewahren Sie diese Quittung als Kaufbeleg auf, da andernfalls das Produkt von der Garantie des Herstellers oder Importeurs ausgeschlossen werden kann.

* Alle Produkt- und Firmennamen sind Warenzeichen oder eingetragene Wa- renzeichen der betreffenden Eigentmer.

Precauciones Ubicacin El uso de la unidad en las siguientes ubicaciones puede dar como resultado un mal funcionamiento: Expuesto a la luz directa del sol. Zonas de extremada temperatura o humedad. Zonas con exceso de suciedad o polvo. Zonas con excesiva vibracin. Cercano a campos magnticos.

Fuente de alimentacin Apague la unidad cuando no la use la batera. Retire las bateras si no va a usar la unidad durante un tiempo largo.

Interferencias con otros aparatos Las radios y televisores situados cerca pueden experimentar interferencias en la recepcin. Opere este dispositivo a una distancia prudencial de radios y televisores.

Manejo Para evitar una rotura, no aplique excesiva fuerza a los conmutadores o controles.

Cuidado Si exterior se ensucia, lmpiese con un trapo seco. No use lquidos limpiado- res como disolvente, ni compuestos inflamables.

Guarde este manual Despus de leer este manual, gurdelo para futuras consultas.

Mantenga los elementos externos alejados del equipo Nunca coloque ningn recipiente con lquido cerca de este equipo, podra causar un cortocircuito, fuero o descarga elctrica. Cuide de que no caiga ningn objeto metlico dentro del equipo.

Nota respecto a residuos y deshechos (solo UE) Si aparece el smbolo del cubo de basura tachado sobre un produc- to, su manual de usuario, la batera, o el embalaje de cualquiera de stos, signifi ca que cuando tire dichos artculos a la basura, ha de hacerlo en acuerdo con la normativa vigente de la Unin Europea para prevenir daos a la salud pblica y al medioambiente. Le ro- gamos que se ponga en contacto con su ofi cina o ministerio de medioambiente para ms detalles. Si la batera contiene metales

pesados por encima del lmite permitido, habr un smbolo de un material qumico, debajo del smbolo del cubo de basura tachado.

NOTA IMPORTANTE PARA EL CONSUMIDOR Este producto ha sido fabricado de acuerdo a estrictas especifi caciones y requerimientos de voltaje aplicables en el pas para el cual est desti- nado. Si ha comprado este producto por internet, a travs de correo, y/ o venta telefnica, debe usted verifi car que el uso de este producto est destinado al pas en el cual reside. AVISO: El uso de este producto en un pas distinto al cual est destinado podra resultar peligroso y podra invalidar la garanta del fabricante o distribuidor. Por favor guarde su recibo como prueba de compra ya que de otro modo el producto puede verse privado de la garanta del fabri- cante o distribuidor.

* Todos los nombres de productos y compaas son marcas comerciales o marcas registradas de sus respectivos propietarios.

(pb)

(Hg)

(Cd)

(Cr(VI))

(PBB)

(PBDE)

: GB/T26572

: GB/T26572

6

- 5 -

Parties du AW-LT100G/AW-LT100B

Compartiment de la pile (Arrire) Indicateur de pile Indicateur d'accordage

Indicateur du nom de la note

Achage de la hauteur de rfrence

Slecteur rotatif droitSlecteur rotatif gauche

Mise en place de la pile Quand la pile commence spuiser, lin- dicateur de pile ( ) sallume. Rempla- cez la pile sans tarder, en veillant utiliser une pile neuve.

1. Ouvrez le couvercle du compartiment de la pile au dos de laccordeur, en tirant le couvercle dans la direction de la flche.

2. Insrez une pile neuve dans le com- partiment de la pile en respectant les indications de polarit, puis refermez le couvercle.

Fixation sur linstrument et plage de manuvre de laccordeur

LAW-LT100G/AW-LT100B dtermine laccordage en captant les vibra- tions de linstrument. Veillez donc fixer lAW-LT100G/AW-LT100B sur la tte de votre instrument pour garantir un accordage fiable. En outre, vous pouvez dplacer et manoeuvrer lAW-LT100G/AW-LT100B comme bon vous semble pour une lisibilit parfaite de son cran.

Vous risquez dendommager lAW-LT100G/AW-LT100B si vous le manipulez avec une force excessive ou si vous tentez de le mani- puler en dehors de sa plage de manoeuvre.

20

100 20

340 180

Sil vous plait, attachez soigneusement lAW-LT100G/AW-LT100B votre instrument. Le laisser attach pendant un long moment peut rayer la surface de votre instrument. Selon divers facteurs tels que la finition, lge et ltat de linstru- ment, il se pourrait que le systme de fixation pince abme la finition de linstrument.

Accordage Procdure daccordage 1. Tournez le slecteur rotatif gauche vers le haut. Chaque tour de

ce slecteur active et coupe alternativement lalimentation du AW- LT100G/AW-LT100B. Si vous laissez lappareil allum pendant environ 3 minutes sans capter aucun son, il steindra automatiquement. (Mise hors ten- sion automatique)

2. Si ncessaire, changez la hauteur de rfrence (calibrage) et le mode daffichage.

3. Jouez une note isole sur linstrument. Le nom de la note la plus proche de la hauteur dtecte saffiche sur lindicateur du nom de la note. Vrifiez que le nom de la note correcte saffiche sur lindicateur de nom de la note, et accordez votre instrument en surveillant la hauteur affiche. Les indications sur laffichage varient selon le mode daffichage actif. Mme si la note se trouve lintrieur de la plage de dtection, elle peut ne pas tre dtecte si le son de linstrument de mu- sique contient un grand nombre dharmoniques ou un temps de descente rapide.

Il se pourrait que laccordeur ragisse des vibrations ambiantes quil capte.

Rglages de la hauteur de rfrence (calibrage) (*M) Chaque fois que vous tournez le slecteur rotatif droit vers le haut (ou vers le bas), la valeur de hauteur de rfrence (calibrage) augmente (ou diminue) par pas de 1 Hz.

Rglage du mode daffichage (*M) Chaque fois que vous tournez le slecteur rotatif gauche vers le bas, lac- cordeur change de mode daffichage.

Traditionnel Stroboscopique Semi-stroboscopique Traditionnel ...

1: Affichage traditionnel Accordez linstrument de sorte que les segments sallument jusquau centre ( ) de laffichage. Si la note est trop haute, des segments sallument droite du segment central. Si la note est trop basse, des segments gauche du segment central ne sont pas allums.

Trop bas. Juste. Trop haut.

2: Affichage stroboscopique Accordez linstrument de sorte que laffichage se stabilise. Comme laffi- chage stroboscopique est dune plus grande prcision, il permet dobtenir un accordage plus fin. Si la note est trop haute, lclairage des diodes se dplace de gauche droite et si la note est trop basse, il se dplace de droite gauche.

Trop bas. Juste. Trop haut.

3: Affichage semi-stroboscopique Accordez linstrument de sorte que le segment central ( ) sallume. Si la note est trop haute, des segments sallument droite du segment central. Si la note est trop basse, des segments gauche du segment central ne sont pas allums.

Trop bas. Juste. Trop haut.

Rtroclairage Aprs avoir mis le AW-LT100G/AW-LT100B sous tension en tournant son slecteur rotatif gauche vers le haut, vous pouvez changer la luminosit de laffichage en maintenant le slecteur rotatif gauche tourn vers le haut pendant environ 2 secondes. Auto : Le rtroclairage sallume de faon vive quand un signal est reu ou quand vous actionnez un slecteur rotatif. En labsence de signal et de manipulation des slecteurs rotatifs pendant environ trois secondes aprs la mise sous tension, le rtroclairage steint automatiquement pour pr- server la pile. Lger : La luminosit de rtroclairage est plus faible pour prserver la pile.

Spcifications Gamme: 12 notes temprament gal Plage de dtection (onde sinus):

AW-LT100G B1 (61,74 Hz) ~ E6 (1319 Hz) AW-LT100B E0 (20,60 Hz) ~ C5 (523,3 Hz)

Prcision: +/-0,1 centime Hauteur de rfrence: A4 = 436 ~ 445 Hz (paliers de 1 Hz) Dimensions (LxPxH): 60 mm x 60 mm x 55 mm Poids: 32 g (pile comprise) Alimentation: Une pile AAA Autonomie de la pile: Environ 100 heures (Rtroclairage:Lger, entre

de la note A4, utilisation continue, avec une pile alcaline)

Accessoires fournis: Manuel dutilisation, une pile AAA *M Les rglages sont conservs mme quand lappareil est mis hors tension. Les caractristiques et laspect du produit sont susceptibles dtre modi-

fis sans avis pralable en vue dune amlioration.

- 6 -

Teile des AW-LT100G/AW-LT100B

Batteriefach (Rckseite) Batterieanzeige Skala

Notennamen-AnzeigeReferenztonanzeige Rechter Shuttle-SchalterLinker Shuttle-Schalter

Einsetzen der Batterie Wenn die Batterie fast erschpft ist, leuchtet die Batterieanzeige ( ) auf. Ersetz en Sie die Batterie umgehend durch eine neue.

1. Klappen Sie den Batteriefachdeckel auf der Rckseite des Stimmgerts in Pfeilrichtung auf.

2. Legen Sie die Batterie ein und achten Sie hier- bei auf die richtige Polaritt. Schlieen Sie den Deckel.

Anbringen am Instrument und Bewegungsspielraum

Das AW-LT100G/AW-LT100B stimmt Ihr Instrument, indem es dessen Schwingungen aufnimmt. Aus diesem Grund sollte das AW-LT100G/AW- LT100B zum Stimmen an der Kopfplatt e Ihres Instruments angebracht werden. Darber hinaus kann das AW-LT100G/AW-LT100B frei bewegt werden, um die Ablesbarkeit des Displays zu verbessern.

Das AW-LT100G/AW-LT100B kann beschdigt werden, wenn innerhalb des Bewegungsspielraums bermige Kraft auf das Gert ausgebt wird bzw. wenn versucht wird, es ber den Bewegungsspielraum hi- naus zu bewegen.

20

100 20

340 180

Bitte befestigen sie das AW-LT100G/AW-LT100B vorsichtig an ihrem Instrument. Wenn sie das AW-LT100G/AW-LT100B fr lngere Zeit an ihrem Instrument befestigt lassen, kann dies zu Vernderungen an der Oberfl che des Instruments fhren. Abhngig von verschiedenen Faktoren wie z. B. altersbedingte Vern- derungen der Lackierung/Oberfl che Ihres Instrumentes, kann es vor- kommen dass ein Anbringen dieses Produkts zu einer Beschdigung fhrt.

Tuning Stimmen 1. Drehen Sie den linken Shuttle-Schalter nach oben. Mit jedem Dreh

dieses Shuttle-Schalters nach oben schalten Sie den AW-LT100G/AW- LT100B ein bzw. aus. Wenn das Gert ca. 3 Minuten ohne jedwede Nutz ereingabe einge- schaltet bleibt, schaltet es automatisch aus (Die Energiesparfunktion).

2. Falls ntig, ndern Sie den Referenzton (Kalibrierung) und den Ska- len-Modus.

3. Spielen Sie eine Einzelnote auf dem Instrument. In der Notenna- men-Anzeige erscheint die Note, die der ermitt elten Tonhhe am nchsten liegt. Prfen Sie, ob der korrekte Notenname im Display erscheint und stimmen Sie Ihr Instrument, whrend Sie die Stimman- zeige beobachten. Die Stimmanzeige variiert je nach gewhltem Anzeigemodus. Auch wenn die Tonhhe innerhalb des Erkennungsbereichs ist, kann die Tonhhe eventuell nicht richtig ermittelt werden, wenn der Klang eines Instruments sehr obertonreich ist oder rasch abklingt.

Das Stimmgert kann auf Schwingungen aus der Umgebung reagieren.

Referenzton einstellen (Kalibrierung) (*M) Mit jedem Dreh des rechten Shuttle-Schalters nach oben (bzw. un- ten) erhht (bzw. erniedrigt) sich der Referenzton (Kalibrierungswert) um 1 Hz. Anzeigemodus auswhlen (*M) Mit jedem Dreh des linken Shuttle-Schalters nach unten ndert sich der Anzeigemodus.

Normal Stroboskop Halb-Stroboskop Normal ...

1: Normale Anzeige Stimmen Sie Ihr Instrument so, dass die Stimmanzeigesegmente bis zur Mitte ( ) aufleuchten. Ist die Stimmung zu hoch, leuchten die Stimmanzeigesegmente rechts von der Mitte auf. Ist die Stimmung zu tief, leuchten die Stimmanzeigesegmente links von der Mitte auf.

Zu tief. Richtig gestimmt. Zu hoch.

2: Stroboskop-Anzeige Stimmen Sie Ihr Instrument so, dass die Stimmanzeigesegmente nicht mehr laufen. Dank der hohen Aufl sung der Stroboskop-Anzeige knnen die Noten viel exakter gestimmt werden. Die Beleuchtung fliet von links nach rechts, wenn die Note zu hoch, und von rechts nach links, wenn sie zu tief ist.

Zu tief. Richtig gestimmt. Zu hoch.

3: Halb-Stroboskop-Anzeige Stimmen Sie Ihr Instrument so, dass das mittlere Stimmanzeigeseg- ment ( ) aufleuchtet. Ist die Stimmung zu hoch, leuchten die Stim- manzeigesegmente rechts von der Mitte auf. Ist die Stimmung zu tief, leuchten die Stimmanzeigesegmente links von der Mitte auf.

Zu tief. Richtig gestimmt. Zu hoch.

Hintergrundbeleuchtung Nachdem Sie den AW-LT100G/AW-LT100B durch Drehen des linken Shuttle-Schalters nach oben eingeschaltet haben, knnen Sie die Helligkeit des Displays einstellen, indem Sie den linken Shuttle-Schal- ter etwa 2 Sekunden lang nach oben gedreht halten. Auto : Die Hintergrundbeleuchtung leuchtet hell, wenn ein Eingangs- signal anliegt bzw. wenn Sie einen Shuttle-Schalter bedienen. Liegt etwa 3 Sekunden nach dem Einschalten kein Signal an und wird der Shuttle-Schalter nicht bedient, erlischt die Hintergrundbeleuchtung, um die Batterie zu schonen. Soft : Die Hintergrundbeleuchtung leuchtet weniger hell, um die Bat- terie zu schonen.

Technische Daten Skala: 12 Noten gleichschwebende Stimmung Bereich (Sinuswelle): AW-LT100G B1 (61,74 Hz)E6 (1319 Hz)

AW-LT100B E0 (20,60 Hz)C5 (523,3 Hz) Przision: +/-0,1 Cent Referenzton: A4 = 436445 Hz (in Schritt en von 1 Hz) Abmessungen (BxTxH): 60 mm x 60 mm x 55 mm Gewicht: 32 g (mit Batterie) Stromversorgung: Eine AAA-Baterie Batterielebensdauer: ca. 100 Stunden (Hintergrundbeleuch-

tung:Soft, A4-Eingang, kontinuierlicher Betrieb mit eingeschaltetem Stimmgert, bei Verwendung einer Alkali-Batterie)

Lieferumfang: Bedienungsanleitung, Eine AAA-Batterie

*M Die Einstellungen bleiben gespeichert, wenn das Gert ausge- schaltet wird.

nderungen der technischen Daten und des Designs ohne vorheri- ge Ankndigung vorbehalten.

- 7 -

Partes del AW-LT100G/AW-LT100B

Compartiment de la pila (Parte posterior)

Indicador de pila Medidor

Indicador de nombre de nota

Pantalla de tono de referencia

Interruptor de rueda derecho

Interruptor de rueda izquierdo

Instalacin de la Pila Cuando la pila comience a agotarse, se iluminar el indicador de pila ( ). Re- emplace inmediatamente la pila por una nueva.

1. Abra la tapa del compartimento de la pila en la parte posterior del afinador siguien- do la direccin de la flecha.

2. Inserte la pila asegurndose de hacerlo con la polaridad correcta y despus cierre la tapa.

Colocacin en el instrumento e intervalo de movimiento

El sistema AW-LT100G/AW-LT100B realiza la afinacin recogiendo las vibraciones del instrumento. Por ello, asegrese de colocar el AW- LT100G/AW-LT100B en el cabezal del instrumento para poder afinarlo. Adems, el AW-LT100G/AW-LT100B se puede mover libremente para leer la pantalla con facilidad.

El AW-LT100G/AW-LT100B puede resultar daado si ejerce una fuerza excesiva en su intervalo de movimiento, o si intenta des- plazarlo ms all de su intervalo de movimiento previsto.

20

100 20

340 180

Por favor sujete con cuidado el AW-LT100G/AW-LT100B a su instru- mento. Si deja el AW-LT100G/AW-LT100B sujeto al instrumento du- rante un largo periodo, puede daar la superficie del instrumento. Dependiendo de varios factores, como el envejecimiento del aca- bado de la superficie, existe la posibilidad de que su instrumento pueda daarse por la colocacin del afinador.

Afinacin Procedimiento de afinacin 1. Gire el interruptor de rueda izquierdo hacia arriba. Cada vez que

se gira el interruptor de rueda hacia arriba, el AW-LT100G/AW- LT100B se enciende o se apaga. Si la alimentacin se deja encendida durante unos 3 minutos sin ningn sonido de entrada, se apagar de forma automtica (Fun- cin de apagado automtico).

2. Si es necesario, cambie el tono de referencia (calibracin) y el modo de medidor.

3. Toque una sola nota en su instrumento. El nombre de nota ms cer- cano al tono detectado aparece en el indicador de nombre de nota. Compruebe que aparece en la pantalla el nombre de nota correcto y, a continuacin, afine el instrumento mientras mira el medidor. Las indicaciones de afinacin difieren en funcin del ajuste del modo de medidor seleccionado. Aunque el tono est dentro del rango de deteccin, puede que no sea posible detectar el tono de un sonido que contenga gran cantidad de armnicos o que tenga una rpida cada.

El medidor puede responder a las vibraciones que recoge del entorno.

Cambio del tono de referencia (calibracin) (*M) Cada vez que gira el interruptor de rueda derecho hacia arriba (o hacia abajo), el valor de tono de referencia (calibracin) aumenta (o disminuye) en pasos de 1 Hz.

Ajuste del modo de medidor (*M) Cada vez que gira el interruptor de rueda izquierdo hacia abajo, el modo de medidor cambia.

Normal Estroboscpico Semi-estroboscpico Normal ... 1: Medidor normal Afine el instrumento hasta que los segmentos del medidor se iluminen hasta el centro ( ). Si el tono est demasiado alto, se iluminarn los seg- mentos del medidor hasta ms all del centro, a su derecha. Si el tono est demasiado bajo, se iluminarn los segmentos del medidor situados a la izquierda, antes de llegar al centro.

El tono es grave. Afinada. El tono es agudo.

2: Medidor estroboscpico Afine el instrumento hasta que los segmentos del medidor dejen de co- rrer. Como el medidor estroboscpico es de mayor precisin, permite una afinacin de ms exacta. La iluminacin fluir de izquierda a derecha si la nota es sostenida o de derecha a izquierda si la nota es bemol.

El tono es grave. Afinada. El tono es agudo.

3: Medidor semi-estroboscpico Afine el instrumento hasta que se ilumine el segmento del medidor si- tuado en el centro ( ). Si el tono est demasiado alto, se iluminarn los segmentos del medidor situados a la derecha del centro. Si el tono est demasiado bajo, se iluminarn los segmentos del medidor situados a la izquierda del centro.

El tono es grave. Afinada. El tono es agudo.

Retroiluminacin Despus de girar hacia arriba el interruptor de rueda izquierdo para en- cender el AW-LT100G/AW-LT100B, puede cambiar la intensidad de la pan- talla manteniendo girado hacia arriba el interruptor de rueda izquierdo durante aproximadamente 2 segundos. Auto : La retroiluminacin se hace ms intensa cuando entra sonido o cuando se acciona uno de los interruptores de rueda. Cuando no ha en- trado sonido ni se ha accionado ninguno de los interruptores de rueda durante aproximadamente tres segundos despus de haber encendido la alimentacin, la retroiluminacin se apagar para evitar que se gaste la pila. Suave : La retroiluminacin tiene un nivel de intensidad ms bajo para evitar que la pila se gaste.

Especificaciones Escala: 12 notas, temperamento igual Rango (onda sinusoidal): AW-LT100G B1 (61,74 Hz)E6 (1319 Hz)

AW-LT100B E0 (20,60 Hz)C5 (523,3 Hz) Precisin: +/-0,1 centsima Tono de referencia: A4 = 436445 Hz (en pasos de 1 Hz) Dimensiones (Anch. x Prof. x Alt.): 60 mm x 60 mm x 55 mm Peso: 32 g (incluyendo pila) Alimentacin: Una pila AAA Vida til de la pila: aproximadamente 100 horas (Retroilumina-

cin:Suave, entrada A4, afinador funcionando continuamente, si se utiliza una pila alcalina)

Elementos incluidos: Manual de usuario, Una pila AAA

*M Los Ajustes son recordados al apagar la unidad. Las especificaciones y el aspecto estn sujetas a cambios sin previo avi-

so por mejora.

- 8 -

R L

1.

2.

20

100 20

340 180

1.L

3

2.

3.

*M R 1Hz

*M L ... 1.

2.

3.

L2 3

12

AW-LT100G B161.74Hz E61319Hz AW-LT100B E020.60Hz C5523.3Hz

0.1 A4=436 445Hz1Hz WxDxH 60 mm x 60 mm x 55 mm 32 g 41

Manualsnet FAQs

If you want to find out how the AW-LT100G KORG works, you can view and download the KORG AW-LT100G Owner's Manual on the Manualsnet website.

Yes, we have the Owner's Manual for KORG AW-LT100G as well as other KORG manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Owner's Manual should include all the details that are needed to use a KORG AW-LT100G. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the KORG AW-LT100G Owner's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This KORG AW-LT100G Owner's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download KORG AW-LT100G Owner's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print KORG AW-LT100G Owner's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the KORG AW-LT100G Owner's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.