KORG KAOSS PAD KP3 System Firmware Update PDF

1 of 8
1 of 8

Summary of Content for KORG KAOSS PAD KP3 System Firmware Update PDF

KP3 Updater 1

KAOSS PAD KP3 System Firmware Update

Update Procedures (for Windows users)

This updater is compatible with Windows XP and Windows Vista, do not try to run it

with Windows 98/Me/2000.

1. Set the Power Switch of the KAOSS PAD to the [STANDBY] position, and connect to

a computer using a USB cable. Plug the connector of the included AC adapter firmly

into the [DC 12V] input. Then connect the AC adapter to an AC power outlet.

2. Unzip the KP3_0103_Updater.zip.

Extract all the files in the zip file before proceeding to step 3. The updater may not be

able to find necessary files if they were not unzipped.

3. Execute the KP3Updater.exe by double-clicking on it. The following window will

appear:

Don t click on the screen yet!

4. Hold down the SAMPLE BANK [C], [D], and [SAMPLING] keys, and then turn on the

power of the KAOSS PAD. (The display of the KAOSS PAD will indicate IPL.) After a

few moments, the KAOSS PAD will be recognized as a new device, and the following

Found New Hardware Wizard window will appear. After this, press the [OK] button

in the window that appeared in step 3 above.

KP3 Updater 2

5. Press the [Cancel] button on the Found New Hardware Wizard window seen above.

(Please ignore the warning messages that may appear on the taskbar.) Then press

the [OK] button on the following dialog window to complete the Cancel procedure.

6. The following window will appear. Press the [OK] button.

KP3 Updater 3

7. During the installation, the following message may appear. Press the [Continue

Anyway] button, and proceed to the next step.

8. When the driver installation is completed, the following window will appear:

Press the [Update] button to start the update procedure. (This window corresponds to the

KAOSS PAD system version 1.01.).

KP3 Updater 4

If the following message is shown, the system firmware is already up to date, and no

update is necessary. If so, you can quit the KP3 Updater.

If a Product ID Error message is shown after pressing the [Update] button, the

updater is likely not for the product you are trying to update. Please check again to be

sure you are using the right updater for your product.

9. The following window will appear during the update process.

Caution: Do not turn off the KAOSS PAD during the update process. Note that the

whole process will take several minutes to complete.

KP3 Updater 5

10. After the update is finished, the following window will appear. Press the [OK] button.

11. The following window will appear. Disconnect a USB cable, and press the [OK] button

to uninstall the driver.

12. After the uninstall process, the following window will appear. Press the [OK] button.

13. This concludes the entire update procedure. Quit the KP3 Updater, and reboot the

KAOSS PAD.

KP3 Updater 6

Update Procedures (for Mac users)

1. Set the Power Switch of the KAOSS PAD to the [STANDBY] position, and connect to

a computer using a USB cable. Plug the connector of the included AC adapter firmly

into the [DC 12V] input. Then connect the AC adapter to an AC power outlet.

2. Quit other applications and the settings. Mount the KP3_Updater_Mar_2007.dmg

by double-clicking on it, and run the KP3 Updater Mar-2007 in the disk image by

double-clicking on it. The following window will appear.

3. Hold down the SAMPLE BANK [C], [D], and [SAMPLING] buttons, and then turn on

the power of the KAOSS PAD. (The display of the KAOSS PAD will indicate IPL.)

The message in the window will change as follows.

If the following message is shown, the system firmware is already up to date, and

no update is necessary. If so, you can quit the KP3 Updater.

KP3 Updater 7

4. Press the [Update] button. The update process will start.

Caution: Do not turn off the KAOSS PAD during the update process. Note that the

whole process will take several minutes to complete.

5. The following message will be shown when the update has successfully completed:

Quit the KP3 Updater, and reboot the KAOSS PAD.

KP3 Updater 8

Contents of the KAOSS PAD KP3 System Firmware Version 1.03

[Bug Fix]

When the KAOSS PAD went into a standby state while connected to a Mac, there was a

possibility of not being able to recover, or wake up the KAOSS PAD (symptom: no

response from the KAOSS PAD). This has been fixed.

[Bug Fix]

When a file was copied in USB mode from the KAOSS PAD using a Mac, there was a

possibil

Manualsnet FAQs

If you want to find out how the KAOSS PAD KP3 KORG works, you can view and download the KORG KAOSS PAD KP3 System Firmware Update on the Manualsnet website.

Yes, we have the System Firmware Update for KORG KAOSS PAD KP3 as well as other KORG manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The System Firmware Update should include all the details that are needed to use a KORG KAOSS PAD KP3. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the KORG KAOSS PAD KP3 System Firmware Update is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This KORG KAOSS PAD KP3 System Firmware Update consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download KORG KAOSS PAD KP3 System Firmware Update free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print KORG KAOSS PAD KP3 System Firmware Update, simply download the document to your computer. Once downloaded, open the PDF file and print the KORG KAOSS PAD KP3 System Firmware Update as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.