Contents

KORG AudioGate3 User's Guide PDF

1 of 49
1 of 49

Summary of Content for KORG AudioGate3 User's Guide PDF

USERS GUIDE AudioGate 3

Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . 3

Supported formats . . . . . . . . . . . . . . . . . . . 3

Supported file formats . . . . . . . . . . . . . . . . . . . . .3

Supported disc formats . . . . . . . . . . . . . . . . . . . .4

Items on the screen . . . . . . . . . . . . . . . . . . 6

Player View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Edit View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

About the songlist . . . . . . . . . . . . . . . . . . . . . . . .6

About the master volume . . . . . . . . . . . . . . . . . .7

About the level meter and clip indicator . . . . . .7

Changing the peak hold time . . . . . . . . . . . . . . . . . . 7

Clearing the peak hold indication . . . . . . . . . . . . . . . 7

About the Menu / help . . . . . . . . . . . . . . . . . . . . .7

Registration to library and editing . . . . . . 8

Song Registration . . . . . . . . . . . . . . . . . . . . . . . .8

Registering an MR project. . . . . . . . . . . . . . . . . . . . . 8

Audio File Registration . . . . . . . . . . . . . . . . . . . . . . . 9

iTunes Song Registration . . . . . . . . . . . . . . . . . . . . . 9

Select a song . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Remove a song . . . . . . . . . . . . . . . . . . . . . . . . . .10

Rearrange the songs (sort) . . . . . . . . . . . . . . . .10

Creating a Playlist . . . . . . . . . . . . . . . . . . 11

Creating a new Playlist . . . . . . . . . . . . . . . . . . .11

Creating a new Playlist by selecting Songs . .12

Rearrange the songs in a Playlist (sort) . . . . .12

Removing and Exporting Playlist and Writing to a Disc . . .12

Song Playback . . . . . . . . . . . . . . . . . . . . . 13

Playing back a song . . . . . . . . . . . . . . . . . . . . . .13

Transport Controllers . . . . . . . . . . . . . . . . . . . .14

Contents of the upper viewer display . . . . . . .15

Direct Locate function . . . . . . . . . . . . . . . . . . . .16

Repeat playback . . . . . . . . . . . . . . . . . . . . . . . . .16

Shuffle playback . . . . . . . . . . . . . . . . . . . . . . . . .16

Audio device settings . . . . . . . . . . . . . . . . . . . .17

Auto sample rate switching function . . . . . . . .18

Playing back 1-bit audio files directly . . . . . . .19

Playback Volume Auto Adjustment Function .20

Audio CD/DSD disc Playback . . . . . . . . . 21

Eject Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Song editing . . . . . . . . . . . . . . . . . . . . . . . 22

Current song editing . . . . . . . . . . . . . . . . . . . . 22

Text Data editing . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Attached picture . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Control Data editing . . . . . . . . . . . . . . . . . . . . . . . . .23

Batch Editing Current Song Information . . . . . . . . . .24

Batch Edit Song Information for Multiple Songs . . . . . . . . . 26

Dividing a song . . . . . . . . . . . . . . . . . . . . . . . . 27

Combining songs . . . . . . . . . . . . . . . . . . . . . . . 27

Channel Link function . . . . . . . . . . . . . . . . . . . 28

Normalization Function . . . . . . . . . . . . . . . . . . 29

Mark function . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Importing marks . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

Exporting marks . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

Editing marks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Other convenient functions . . . . . . . . . . . . . . 30

Reverting an edit (Undo) . . . . . . . . . . . . . . . . . . . . .30

Re-executing the edit (Redo) . . . . . . . . . . . . . . . . . .30

Exporting in a different audio format . . . 31

Exporting an audio file . . . . . . . . . . . . . . . . . . 31

Optional settings. . . . . . . . . . . . . . . . . . . . . . . . . . . .34

Creating an audio CD or DSD disc . . . . . . . . . 38

Optional settings. . . . . . . . . . . . . . . . . . . . . . . . . . . .41

Auto Update function . . . . . . . . . . . . . . . 43

Manually checking for updates . . . . . . . . . . . . 43

Automatically checking for updates . . . . . . . 44

Other settings . . . . . . . . . . . . . . . . . . . . . 45

Changing the folder where temporary files are created . . . . . . . 45

Resetting the warnings of all dialog boxes . . 45

Changing the type of real-time conversion . . 46

Switching background . . . . . . . . . . . . . . . . . . . 46

List of shortcuts . . . . . . . . . . . . . . . . . . . . 48

Introduction AudioGate 3 High Definition Audio Player Software is a high function audio player and file conversion application 

that supports 1bit audio.

Using AudioGate 3, audio files that have differing formats in the computer can be controlled and played, and the 

playback functionality provides direct playback of 1bit audio files by using certified audio devices such as the Korg 

DSDAC series.

In addition, using AudioGate 3, MR projects or other various audio files recorded by the Korg MR series can be con

verted to your desired format to export, and you can also create audio CDs or DSD discs. Editing procedures such as 

cut, fade, and normalize are also supported.

In AudioGate 3, each item of audio data in the songlist is called a song.

Supported formats

Supported file formats AudioGate is able to import/export (input/output) audio files of the following formats.

File format (extension)

Windows Mac Number of 

channels

Sample rate Bit depth

In Out In Out

PCM WAV (.wav)

1ch

2ch

44.1 kHz, 48 kHz

88.2 kHz, 96 kHz

176.4 kHz, 192 kHz

16 bit, 24 bit

32 bit(float)BWF (.wav)

AIFF (.aif/.aiff) 16 bit, 24 bit

1bit DSDIFF (.dff)

1ch

2ch

2.8224 MHz

5.6448 MHz 1bitDSF (.dsf)

WSD (.wsd)

Irreversible 

compression

MP3 (.mp3) *3

1ch

2ch

44.1 kHz, 48 kHz

AAC (.m4a) *1

WMA (.wma) *2

WMA Professional 

(.wma)

*2 2ch 44.1 kHz, 48 kHz

88.2 kHz, 96 kHz

Lossless  compression

WMA Lossless 

(.wma)

*2 2ch 44.1 kHz, 48 kHz

88.2 kHz, 96 kHz

16 bit (only 44.1 

kHz), 24 bit

Apple Lossless 

[ALAC] (.m4a)

*1 1ch

2ch

44.1 kHz, 48 kHz

88.2 kHz, 96 kHz

176.4 kHz, 192 kHz

16 bit, 24 bit

FLAC (.flac)

*1 Supported if QuickTime7 is installed

*2 Supported if Flip4Mac WMV is installed. http://www.microsoft.com/windows/windowsmedia/player/wmcomponents.mspx

*3 Supported if Windows Media Player 10 or later is installed

In some cases, it may not be possible to correctly read files that were not created by a Korg MR series unit or by 

AudioGate.

Audio files protected by DRM (Digital Rights Management) cannot be loaded.

3

Supported disc formats AudioGate 3 supports reading and writing of audio CDs and DSD discs.

AudioGate 3 can create discs in the following formats.

Disc format Audio CD (CDDA) DSD discs

Disc media CDR, CDRW DVDR, DVDRW

DVD+R, DVD+RW

Approximate recording time Approx. 74 minutes 

(when using 700 MB media)

Approx. 100 minutes 

(when using 4.7 GB media)

Number of albums  that can be recorded on one disc

1 1

Maximum number of tracks  that can be recorded on one disc

99 99

Recording time for one track Minimum 4 seconds 0 seconds

Maximum Approx. 74 minutes Approx. 100 minutes (4 GB)

Sampling frequency 44.1 kHz 2.8224 MHz

Bit depth 16 1

Number of channels 2 2

Recordable metadata CDTEXT format  (alphanumeric only)

 Title

 Artist name

* Not recordable for some drives

ID3v2.3 format

 Title  Title (Read)

 Artist name

 Artist name (Read)

 Album name

 Album name (Read)

 Album Artist name

 Album Artist name (Read)

 Track No.

 Disc No.

 Genre

 Date and time of recording

 Attached picture

 Writing to duallayer DVD media is not supported.

 A writable CD/DVD drive is required in order to create audio CDs or DSD discs.

What are DSD discs? DSD discs are a new disc format that was created as a way for an individual to record and playback DSD format 

material. This means that the methods used to create audio discs on CDR or CDRW media are now also avail

able for the world of DSD audio. DSD discs can be played on compatible players and enjoyed in their original 

high quality.

DSD disc is a disc format that is different than the Super Audio CD. Not all Super Audio CD players will nec

essarily be able to play back a DSD disc.

* DSD discs  (1bit; 2.8 MHz) created by AudioGate 3 can be played back on players such as  the Sony SCD

XA5400ES Super Audio CD/CD player, the Sony SCDXE800 Super Audio CD/CD player or PlayStation3 

from Sony Computer Entertainment  Inc. DSD discs  to be played on  the Sony SCDXA5400ES or  the Sony 

SCDXE800 require  the  following conditions. AudioGate meets  these conditions.  (As of August 21st, 2010, 

confirmed by KORG Inc.)

Disc: DVDR, DVDRW, DVD+R, and DVDRW, that are compatible with DVDROM specifications

4

File extension: dsf

Folder type: DSD_DISC folder

Maximum size of a file: up to 4GB

Channel: 2channel

Maximum number of playable files: up to 150 files per folder

Maximum number of playable folders: up to 200 folders per disc

Maximum number of playable layers: up to 8th layer

Sampling frequency: 2.8224 MHz

* The availability of these products may vary by country.

* PlayStation is a registered trademark of Sony Computer Entertainment Inc.

Japan: http://www.jp.playstation.com/

US: http://www.us.playstation.com/

Europe: http://uk.playstation.com/countryselector/

Please check following URL for other countries.

http://www.playstation.com/countryselector/

* DSD Disc Format is a trademark of Sony Corporation.

5

Items on the screen Most of AudioGate 3 is used in the viewer. This viewer size can be changed freely. In addition, the viewer will be 

changed between play screens (Player View) and editing screen (Edit View) each time you click the edit button.

By clicking the menu button to select [View]  [Switch View], you can also change the screen.

Player View

Level meter

Menu button

Edit button

Master volume

Songlist

Controller Song waveform display

Attached picture Search window

Side bar Display button

Context menu icon

Edit View

Menu button

Edit button

Clip Indicator

Level meter

Master volume

Songlist

Controller

Search window

Side bar Display button

Context menu icon

Song waveform display L

Song waveform display R

About the songlist The info viewer will display information about the songs (audio files) registered in the library (see page 8) or the 

play list (see page 11) in the songlist. When switching the display of the songlist, click the side bar display button to 

select an item.

6

About the master volume AudioGate 3 can adjust the level to send signals to audio devices such as an audio player separately from the gain. 

You can drag the master volume upward/downward to make adjustments to the level.

About the level meter and clip indicator During song playback and export, AudioGate 3s level meter shows the peak values of the output data following 

sample rate conversion. In addition, the clip indicator is displayed in the editing screen only.

When playing PCM data, exporting a PCM file, or creating an audio CD, the units are dBFS relative to fullscale lin

ear PCM data (0 dB).

 Except for when exporting a 32bit (float) file, the clip indicator will light up when there is a signal that would 

exceed 0 dBFS, and the signal will be clipped to 0 dBFS and exported.

When playing or exporting a 1bit audio file and when creating a DSD disc, the units are dBSACD, with the theoret

ical limit of DeltaSigma conversion defined as +6dBSACD.

The conversion algorithm of most PCM  DSD converters (including AudioGate 3) is designed so that by default, 0 

dBFS = 0 dBSACD.

During 1bit audio output, the clip indicator will also light up when a clip in DeltaSigma conversion is detected.

Changing the peak hold time AudioGate 3s level meter and clip indicator provide a peak hold function. Heres how to change the length of time 

that these indications are held.

1. Rightclick (Mac: Control+click) the level meter.

2. Choose [Peak Hold Duration of Level meter] or [Hold Duration of Clip Indicator] and select the desired time  from the options shown.

By clicking the menu button to select [View]  [Peak Hold Duration of Level meter] or [Hold Duration of Clip Indica

tor], you can also change the time.

Clearing the peak hold indication When the level meter is in use, clicking it will clear the hold indicators without waiting for the specified hold times.

About the Menu / help When you click the menu button and select [Help], you can get the latest information about AudioGate 3.

7

Registration to library and editing By registering MR projects or audio files to the library of AudioGate 3 on your computer, audio files can be played 

back or, converted to another format to export.

In AudioGate 3, each item of audio data in the songlist is called a song.

When registering songs to the AudioGate 3 library, a copy of the file will not be created but the file information 

will still be registered to the library.

When a lot of songs are registered at a time, it will take time to display them in the songlist. Also the song wave

form display requires time to be analyzed during registration, so the song waveform display remains in a bar 

state for a while.

Song Registration

Registering an MR project You can register a project that was recorded on a Korg MR series unit.

Although it is possible to register only an audio file recorded on your MR series registering an MR project will allow 

the marks that were added during recording to be  imported. Even if the audio files have been divided, they will 

automatically be joined so that they can be handled as a single song.

Drag the MR project (the entire MR project folder) that you want to register into the songlist.

Alternatively, you can click the menu button and select the .prj file (located in the folder) by selecting the [File]  

[Add Audio Files...].

When  the  songlist of  the  library  is displayed,  the MR project  is  registered  to  the  library  as  songs. When  the 

selected playlist is displayed, it is registered to the playlist as well as the library.

Simply registering an item into an AudioGate 3 library does not back up the file. Before you proceed, we recommend that projects recorded on your MR series unit be copied to the hard disk of 

your computer.

drag & drop

8

Audio File Registration Audio files can be registered as songs. Any file format which AudioGate supports can be imported and registered as 

a song. (see page 3)

You cannot register a song that is already registered.

  Drag the audio file that you want to register into the songlist.

Alternatively, you can do the same thing by clicking the menu button and selecting the [File]  [Add Audio Files...].

When the songlist of the library is displayed, audio files are registered to the library as songs. When the songlist 

of the selected playlist is displayed, songs are registered to the playlist as well as the library.

drag & drop

iTunes Song Registration iTunes songs can be registered into the library. 

1. Click the menu button to select [File]  [Add iTunes songs].

2. The iTunes song is now registered into the library.

Songs recently added to the iTunes library will only be registered into the library when they are selected [Add 

iTunes songs]. Duplicate registration of songs is not allowed.

9

Select a song Click the song on the songlist.

To select multiple songs, hold down the Ctrl key (Mac: Command key) and click.

The selected song will be displayed in bold.

Selected Song

Remove a song Move the mouse pointer onto the targeted song, and click the context menu icon displayed on the right side of the 

Title to select the [Remove Songs] option.

Alternatively, you can select [File]  [Remove Songs] by clicking the menu button.

You can also select the [Remove Songs] option by rightclicking on the selection (Windows) or controlclicking 

(Mac). 

Removing songs deletes the songs from the playlist. In addition, removing the songs from the playlist does not 

delete the songs from the library.

Rearrange the songs (sort) In the songlist, you can sort the songs by clicking on Title, Time, Artist, Album, Genre or Format from the section 

headings at the top of the list. The songs are sorted in alphabetical ascending order or descending order each time 

you click the button.

10

Creating a Playlist You can create an original Playlist by collecting favorite or themed songs from your AudioGate 3 library.

In this Playlist, you can add, select, remove and sort the songs as well as in the library.

When you register songs that are not registered in the library into the Playlist, the songs will be automatically 

registered into the library as well as the Playlist.

When song information is updated for a song thats in a playlist, the song information will also be updated in 

the library. .

Creating a new Playlist 1. Click the side bar display button at the upper left corner of the songlist.

Side bar Display button

Context menu icon

Side bar Display button

2. A Playlist bar will appear. Click the + button in the right corner. The playlist named Playlist will appear. If you do not change the name, new playlist names after the second 

instance will be Playlist n (n: auto increment start at 1).

3. To change the playlist name, click on the name section.

4. Click the Library on the playlist bar to display the songs registered in the library.

5. Select songs in the Library to register them into the playlist displayed in the side bar. To select multiple songs, hold down the Ctrl key (Mac: Command key) and click.

Move the mouse pointer onto the selecting song, and click the context menu icon displayed on the right side of 

the Title to select the [Add to Playlist] function to register the song.

You can also select the [Add to Playlist] function to register the song by rightclicking (Windows) or control

clicking (Mac).

6. When you select the playlist displayed under the playlist bar, the registered songs will appear in the Songlist.

11

Creating a new Playlist by selecting Songs Move the mouse pointer onto the targeted song in the Songlist, and click the context menu icon displayed on the 

right side of the Title to select the [New Playlist from Selection] function.

The playlist will be named after the selected song. 

You can also select and register the [New Playlist from Selection] by rightclicking (Windows) or controlclicking 

(Mac).

Rearrange the songs in a Playlist (sort) Songs in a playlist can be sorted (see page 10) as well as the Songlist of the library. In addition, selecting the items of 

the Songlist No. enables dragging the songs and sorting the songs to a desired order.

Removing and Exporting Playlist and Writing to a Disc Select the Playlist to remove by rightclicking (controlclicking for the Mac. device) and select Exporting (see page 

31) and Creating Disc (see page 38).

Removing the Playlist deletes the registered information of the Song in the Playlist only. The songs of the library 

and other Playlists are not deleted.

12

Song Playback In AudioGate 3, you can playback the Songs registered in the Songlist. This provides a useful way to playback the 

songs in each format including 1bit audio files with uniform sampling frequency, to check the file contents or to set 

an editing point (see page 29).

The song playback  functionality  thats provided by AudioGate 3  is a convenient  feature  that utilizes a high

speed filter, and direct output of 1bit DSD. In order to experience the full sound quality of 1bit audio, please 

use the Korg DSDAC series, a certified USB audio device, or a device that supports 1bit audio, such as the Korg 

MR series.

In AudioGate 3, the song thats playing (or paused for playback) is called the current song. The current song is 

displayed in bold and indicated by a Playback / Pause icon on the left side of the title, and the viewer will display 

the artist name, title and album name about that song on the upper section. The current location in the current 

song is called the current position. The current position can be seen in the time display. (Refer to Contents of 

the upper viewer display on page 15.)

Playing back a song Doubleclick a song in the songlist to make it the current song. Playback will begin automatically.

If you experience problems with playback, for example if there is no sound or if there are frequent clicks or pops 

in the playback, please refer to Audio device settings on page 17.

Play/Pause Icon Double-click the song

you want to play

13

Transport Controllers You can use the following features to control the playback.

Alternatively, you can select [Controls] by clicking the menu button.

FromFFREW

FFREW

To

Play/Pause

Play/PausePlayback point

Playback point

Controller name Action

Play/Pause button Switches the current song between playback and pause

FF button Changes the current position to the next mark location. If there is no next mark, the current 

position will change  to  the next song  in  the songlist. By holding down  this button you can 

fastforward the playback point.

REW button Changes the current position to the previous mark location. If there is no previous mark, you 

will move to the beginning of the song. By holding down this button you can rewind the play

back point.

To button If you click this while paused, a twosecond region ending at the current position will play.

From button If you click this while paused, a twosecond region starting from the current position will play.

Playback point Where the color a songs waveform is inverted indicates the current playback point. You can 

change the playback point by clicking on the desired point on the songs waveform display or 

by dragging this to left or right.

14

Contents of the upper viewer display The upper viewer shows information about the current song.

Sample rate of the audio device

Title

TitleArtist Album

Format

Time information

Time information

Artist Album Format

Search window

Sample rate of the audio device Search window

Song waveform display L

Song waveform display R

Song waveform display

 Item Method

Sample rate of  the audio device

Indicates the sample rate of the audio device. The current song is converted to 

this sample rate in realtime as it plays.

Artist Indicates the artist name of the current song.

Title Indicates the title name of the current song.

Album Indicates the album name of the current song.

Search window You can select All, Title, Artist and Album.

Click the magnifier mark on the left side of the search window to search in the 

selected items. When selecting All, the search is executed using all of the items, 

Title, Artist and Album.

If the songlist contains the fitted items, the fitted songs will be displayed.

Format Indicates the file format, number of channels, sample rate, and bit depth of the 

current song. When playing files with irreversible compression, the bit depth 

icon will be the bit rate indication (e.g., 128 kbps).

Time information The current position time and the whole time of the current song are displayed.

15

Direct Locate function This allows you to specify the current position directly from the keyboard.

1. While a song is playing or stopped, click the time information.

2. The counter will become an editable field. From the keyboard, enter the new counter position (e.g., 2:30). You may omit the colon (:), and simply enter 230 (interpreted as 2:30) or 1204 (interpreted as 12:04).

Click

3. Press the Enter key on the keyboard. Note that the current position has changed.

Repeat playback The viewer will cycle between Repeat, Repeat of Current Song or No repeat each time you click the button. (Player 

View only)

Shuffle playback The viewer will cycle between Play in Shuffled order and No Play in Shuffled order each time you click the button. 

(Player View only)

16

Audio device settings You can change the settings of the audio device by clicking the display section of the sample rate in the audio device.

If the song does not play correctly, please check these settings to make sure that each item is configured properly. In 

addition, you can also click the menu button and select [Edit]  [Preferences...] to display the settings of the audio 

device.

A fast CPU is required for stable playback of 1bit audio files directly, or realtime conversion from PCM to 1bit 

audio files. If any skip or noise occurs frequently during playback, adjusting the output buffer size may help improve the 

performance.

Click

17

Auto sample rate switching function AudioGate 3 can automatically switch the sample rate of the audio device to match the sample rate of the current 

song.

1. Click the display section of the sample rate in the audio device.

You can also click the menu button and select [Edit]  [Preferences...] to display it.

2. Click the [Audio Device] tab.

3. In the [Sample Rate] section, select [Auto].

If the sample rate of the current song is not supported on the audio device, the sample rate will be set to the 

highest value of the device.

Click

18

Playing back 1-bit audio files directly AudioGate 3 can play back 1bit audio files (DSDIFF, DSF or WSD) directly, without any conversion to PCM(*1).

*1 This feature is only available when you are using a KORG USB Audio Device Driver(Windows ASIO /Mac).

You can only use this function with devices that are certified by KORG Inc. including the KORG DSDAC series.  Please see the device list on our website. 

http://www.korg.com/products/audio/audiogate3/

Please perform the following step, while being connected to computer audio equipment.

1. Click the display section of the sample rate in the audio device.

You can also click the menu button and select [Edit]  [Preferences...] to display it.

2. Click the [Audio Device] tab.

3. In the [Driver Type] section, select [ASIO] (Mac [CoreAudio]).

Click

4. Select the correct audio device in the [Driver Name] section.

5. In the [Sample Rate] section, select [Auto], [2.8MHz] or [5.6MHz].

Click

6. Doubleclick a 1bit song (DSDIFF, DSF or WSD) in the songlist or the playlist to make it the current song.  Playback will begin automatically.

19

Playback Volume Auto Adjustment Function This function enables you to listen to songs at almost the same volume level while automatically adjusting the vol

ume of all songs during playback of songs from the Songlist. In addition, this function works during playback only 

and does not adjust the gain of the audio file itself.

1. Click the display section of the sample rate in the audio device.

You can also click the menu button and select [Edit]  [Preferences...] to display it.

2. Click the [Other] tab.

3.  Select the setting of the [Auto Adjust Playback Volume] feature.

Off: The Auto Adjustment Playback Volume function will not be applied.

Song: Playback volume of each song will be adjusted.

Album: Playback volume of each song will be adjusted while preserving the volume balance between songs in 

the album.

Click

20

Audio CD/DSD disc Playback AudioGate 3 will playback each track on the Audio CD/DSD disc as a song as well as registered songs in the library. 

For information on how to playback a song, see Song Playback.

You cannot load a DSD disc using a drive that does not support DVD.

1. Insert the disc into your computers CD/DVD drive.

If another window (a different application) appears, close that window.

If your computer does not detect a disc, a message will indicate No audio discs found. Wait for a brief time, 

and if the disc is still not detected, check whether the drive is correctly connected to your computer and make 

sure that there is no problem with the disc that has been inserted.

2. If no side bar is displayed, click the side bar display button.

3. When Disc bar is added to the side bar, click the displayed Audio CD (or DSD disc). A list of the songs on the disc will appear in the songlist.

At this time, the song is not added to the library.

If the audio CD youre inserting into the drive contains embedded CDTEXT data, or if the DSD disc contains 

embedded ID3v2.3 data, the track titles will be used as the song names.

If you want to save each track on the Audio CD/DSD disc as an audio file, export it to the desired folder on your 

computer. If youre registering this into the Playlist or editing it, you must register it into the library. (Refer to 

Song Registration on page 8.)

Eject Disc Select the Disc to eject by rightclicking (Windows) or controlclicking (Mac). Alternatively, you can select [Controls] 

 [Eject Disc] by clicking the menu button.

21

Song editing AudioGate 3 lets you divide or combine songs in the songlist. 

This allows you to export selected regions from an audio file, or combine multiple consecutivelyrecorded files into 

a single file before you export it. You can also edit the gain, fade, and DC cut settings of each song, and edit text data 

such as the title and artist name.

In addition, though you can edit some part of it in Player View, you can make more detailed changes in Edit View.

Edits applied to a song will be commonly reflected in both the library and the playlist. However, it will not be 

reflected in the song in the Playlist only when the division, combine and channel link function are executed in 

the songlist of the library.

Current song editing

Text Data editing Edit the text data of the current song as follows.

Artist, title, album

Edit the text on the left and right side of the attached picture in Player View or above the song waveform display 

of the upper viewer in Edit View. Click the text to make the text information editable. When you finish editing, 

press the Enter key to finalize the change.

All text data

You can use the Batch Edit feature to modify the text information for a group of songs at once.  (Refer to Batch 

Editing Current Song Information on page 24 and refer to Batch Edit Song Information for Multiple Songs on 

page 26)

The title is used as the name of the output file when exporting.

If the song has no information about the title, the file name will be displayed in the Title field.

It is possible to enter Japanese (multibite text) as the title. However, you should use English alphanumeric char

acters if you intend to export as an MR project.

Attached picture Attached picture for the current song is displayed in Player View. If you want to change the attached image, click the 

displayed image and then select the desired image file.

Simply attaching an  image  file does not embed  the  image  in  the audio  file. This means  that  if you move  the 

image file, it will no longer be displayed in AudioGate 3. In order to embed the picture, you must export the file 

or create a disc.

If you want to delete the attached image, move the mouse pointer onto the image and click the X button.

Deleting the attached picture in AudioGate 3 does not delete the original image file.

AudioGate 3 can load images in the following formats.

Image files in JPEG or PNG format

Image files embedded in an AIFF, DSF, MP3, WMA, AAC, Apple lossless, or FLAC format audio files

AudioGate 3 can embed the picture attached to a file when exporting the following formats.

AIFF, DSF, MP3, WMA, or FLAC format audio files

DSD discs

22

Control Data editing Various control information for the current song is displayed in Edit View.

You can edit these settings by double clicking them and entering a value (or by making the changes by dragging the 

mouse up or down in the selected field). These settings are reflected when you play back or export the song.

This setting is not reflected in the edited song waveform display.

Control Data

Control Data

 Item Method

Balance This adjusts the left/right volume balance of the song within a range of L100...C...R100. 

However, the balance of a monaural song is fixed at C (center), and cannot be changed.

Gain Specify the volume level of the song in a range of  60.0 dB...+ 60.0 dB. Adjust this so 

that the clip indicator does not light up during playback or during export.

Fade In This specifies the shape of the envelope used for the fadein, and the time duration (0.0 

second20.0 seconds) for the fadein to be completed.

Fade Out This specifies the shape of the envelope thats used for the fadeout, and the time dura

tion (0.0 seconds20.0 seconds) for the fadeout to be completed.

DC Cut Normally you will leave this Off (disabled). If the song file contains a DC offset, you 

can turn this On to remove the offset. While often inaudible, a DC offset can reduce 

the available headroom before clipping, and can affect the sound quality in other ways.

23

Batch Editing Current Song Information Edit the song information of the current song.

The song information includes the text data, the attached picture and control information (see page 23). This infor

mation can be edited in the Batch Edit Song Information... view.

When a file is exported, this information is embedded in the header of the exported file.

Embedding to AAC and the Apple lossless file is not supported.

It is possible to enter Japanese (multibyte text) as text information, but you should use English alphanumeric 

characters if you intend to export in a format other than AIFF, DSF, MP3, WMA, FLAC file or DSD Disc. Due to 

limitations in the file format, characters other than English alphanumerics will be ignored when exporting.

1. Move the mouse pointer onto the targeted song in the Songlist, and click the context menu icon displayed on 

the right side of the Title to select the [Batch Edit Song Information...].

Alternatively, you can select [Edit]  [Batch Edit Song Information...] by clicking the menu button.

You can also select and register the [Batch Edit Song Information...] by rightclicking (Windows) or control

clicking (Mac).

2. Click the text of the desired items in the Batch Edit Song Information... view to enter the text. 

24

3. Edit the data for the items you selected. A check mark will automatically be placed in the check box of the edited item. Removing the check mark finalizes 

the edit.

Text Information

When you click the text editing field located at the right of an item name, it will become editable. (Refer to Text 

Data editing on page 22.)

Attached picture

AudioGate 3 can load images in the following formats. (Refer to Attached picture on page 22.)

Control Data (Balance, Gain, Fade In, Fade Out, DC Cut)

You can edit these settings by clicking the button and doubleclicking the figure to enter a value (or by dragging 

the mouse up or down in the selected field). (Refer to Control Data editing on page 23.)

4. Press the OK button.

The metadata editing window will close, and the edits will be reflected in the current song.

When a file is exported, this information is embedded in the header of the exported file. Depending on the file 

format, among the information embedded in the header, items that can be read or written are limited. If Add 

iTunes songs is executed, the information supported by iTunes overrides the others, regardless of the format.

25

Batch Edit Song Information for Multiple Songs You can execute batch editing of the text data for multiple songs, attached pictures and control information.

1. Click the song on the songlist to select it.

2. To select multiple songs, hold down the Ctrl key (Mac: Command key) and click other songs.

3. Move the mouse pointer onto the selected song, and click the context menu icon displayed on the right side of  the Title to select the [Batch Edit Song Information...] function. Alternatively, you can select [Edit]  [Batch Edit Song Information...] by clicking the menu button.

You can also select and register the [Batch Edit Song Information...] by rightclicking (Windows) or control

clicking (Mac) in the songlist.

4. Click the button to the left of each item you want to edit, so that the desired buttons are selected.

5. Edit the data for the items you selected. See procedure 3:  Batch Editing Current Song Information on page 24.

6. Press the OK button. The metadata editing window will close, and the edits will be reflected in the songlist.

26

Dividing a song You can divide the current song into two separate songs at any point.

When you divide a song, the original song will be left as it is and the two songs that have other names following the 

Divide operation will be registered into the Songlist. 

1. Use the song playback functions to move to the point where you want to divide the song.

2. Make sure that playback is paused, and click the Divide button. Alternatively, you can perform the same thing by clicking the menu button and selecting the [Edit]  [Divide].

You will see that the song has been divided in the songlist.

Text data and control information will generally be carried over into both songs following the Divide operation.

Click Move to the

dividing point

Last half

First half

Combining songs Combining songs splices the end of one song directly to the beginning of another song. Heres how you can combine 

two or more songs into a single song.

When you combine songs, the original song will be left as it is and the song that has another name following the 

Combine operation will be registered into the Songlist.

1. In the songlist, click a song to select it.

2. Hold down the Ctrl key (Mac: Command key), and click on other songs to select them.

Click

Hold down the Ctrl key and click

3. Move the mouse pointer onto the selected song, and click the context menu icon displayed on the right side of  the Title to select the Combine button. Alternatively, you can select [Edit]  [Combine] by clicking the menu button.

You can also select and register the [Edit]  [Combine] by rightclicking (Windows) or controlclicking (Mac).

27

You will see that the songs have been combined in the songlist.

You can use  the Combine  function  to  join  recordings  together  that were not originally  separated by  the MR 

recorders automatic split function, however a faint noise may be introduced at the point where the songs are 

joined.

You cant combine songs of differing formats.

You cant combine songs that are in compression formats such as MP3, AAC, Apple lossless (ALAC), or WMA.

Text data and control information will generally be taken from the top song in the list.

Channel Link function This allows you to handle two monaural songs as a single stereo song. Normally you will use this to link two songs 

of the same length.

When you link songs, the two original songs will be left as they are and the song that has another name following 

the Link operation will be registered into the Songlist.

1. Click one of the songs in the songlist to select it.

2. Hold down the Ctrl key (Mac: Command key) and click the other song so that both songs are selected.

Click

Hold down the Ctrl key and click

3. Move the mouse pointer onto the selected song, and click the context menu icon displayed on the right side of  the Title to select the Channel Link button. Alternatively, you can select [Edit]  [Channel Link] by clicking the menu button.

You can also select and register  the [Edit]   [Channel Link] by rightclicking (Windows) or controlclicking 

(Mac).

28

Verify that the songs are linked in the songlist.

You cant link songs of differing formats.

You cant link songs that are in compression formats such as MP3, AAC, Apple lossless (ALAC), or WMA.

 If you link songs that are of differing lengths, the resulting length will match the longer song.

Text data and control information will generally be taken from the top song in the list.

Normalization Function When the Normalize button is pressed, the current song will be normalized to its maximum volume, and a value 

will be set to Gain in the control data of the song so that the peak value may not exceed 0 dB.

Click

 The result of normalization is not reflected in the song waveform display.

Mark function In Edit View, you can place marks to the time base of the song. If you place marks on editing points or in an approx

imate position between music such as live music, you can move to the correct positions quickly.

Importing marks AudioGate 3 can load the following marks.

Marks included in an MR project

Marks included in the cuepoints chunk of a WAV/BWF file

Marks (track start and index) included in the marker chunk of a DSDIFF file

Exporting marks AudioGate 3 can embed marks when exporting the following file formats.

MR project format

WAV or BWF files

DSDIFF files

29

Editing marks If you click the mark information, the mark list will appear and you can edit it. In addition, you can see the regis

tered mark icons shown above the time slider of song waveform display. The mark information and the red mark 

icon are the current mark position you are selecting.

Mark icon

Mark list

Mark information

Operation Method

Selecting a mark Click the mark icon (or by the mark list). The mark icon will be displayed in red 

and selected, and the mark number and mark location will be displayed in the 

mark information.

Adding a mark Click the Add button to add a mark at the current position. You cant add marks at the same position.

Removing a mark Click the mark icon at the position that you want to remove (or by the mark 

list), and click the Remove button.

Editing the location of a mark Select the mark whose location you want to edit, and click the displayed mark 

time. The time indication will become editable. Use the keyboard to enter the 

desired time, and press the Enter key.

Removing all marks from the current song Click the menu button and select the menu item [Edit]  [Remove All Marks].

Dividing the song at all marks locations Click the menu button and select the menu item [Edit]  [Divide At Marks].

Moving to a mark location

Operation Method

Moving to the next mark Click the FF button. You will move to the next mark relative to the current position.

Moving to the previous mark Click the REW button. You will move to the previous mark relative to the current position.

Moving to a specified mark Doubleclick the mark icon.  Click the mark information   to select a mark from the list.

Other convenient functions

Reverting an edit (Undo) Click the menu button and select the menu item [Edit]  [Undo], you can revert to the state prior to executing the 

most recent editing operation.

Re-executing the edit (Redo) Click the menu button and select the menu item [Edit]  [Redo], you can reexecute the operation that was reverted 

by the Undo command.

30

Exporting in a different audio format AudioGate 3 can convert the songs in the songlist into a desired format and export them as audio files or use them to 

create an audio CD or DSD disc.

The MR series does not necessarily  support all  formats  that are  supported by AudioGate 3.  If you want  the 

exported  file  to play on your MR series recorder,  the  file must be converted  to a  format  that your MR series 

recorder supports. For more information, please refer to the owners manual of your MR series unit.

Exporting an audio file Heres how to convert the songs in the songlist into a desired format and export them as audio files or as an MR 

project. The title in the songlist will be the name of the exported file.

1. Make sure that the songlist contains the file that you want to export, and then click the Export button.

The Export file setting screen will appear.

Click

Alternatively, you can select [File]  [Export...] by clicking the menu button.

2. Set the conversion source. Choose [Current Song] to export the current song or choose [Selected Playlist] to  export all songs in the current songlist.

Select

31

3. In the [Destination] area, click the [...] and choose the exportdestination folder.

Select the export- destination folder

Click

4. Specify the desired output file format.

Select

5. Specify the desired output file type.

Select

32

Mono/Dual Mono

A monaural song will be exported as a monaural file, and a stereo song will be exported as a dual mono file. 

This is especially convenient if the file is going to be brought into in a DAW after export.

Stereo Interleaved:

A channelinterleaved stereo file will be exported. In the case of a monaural song, the L channel and R chan

nel will contain the same data. If you want to play back the file on the MR series recorder, copy it into the 

AUDIO folder.

MR Project:

An MR project folder containing a .prj file and audio file will be exported. This is useful when exporting very 

large audio data (exceeding the 4 GB limit of FAT32).

Marks edited by AudioGate 3 can be embedded into the MR project. If you want to play back the songs on 

the MR series recorder, copy the file to the appropriate location in the MR_PROJ folder. Please refer to the 

owners manual of your MR series recorder for more information.

6. Specify the desired sample rate and bit depth for the exported file.

Select Select

7. Set optional settings (see page 34) if it is required.

8. Click the OK button. File conversion export will begin.

Click

33

1bit audio files may contain louder signals than PCM. When converting 1bit audio files to PCM files, you 

might need to set gain settings down by approximately  3.0 dB to avoid clipping (see page 23).

When exporting a song as a 1bit audio file, a minimal amount of silence may be added to the end of the 

exported file.

If the input file and the output file have the same sample rates, and if the gain and DC Cut settings are kept 

to default (see page 23), AudioGate 3 may switch to direct exporting mode where unnecessary recalcula

tion  is  reduced. The  level meter will be  fixed  to 0dB when AudioGate 3  is  running  in direct exporting 

mode.

Optional settings When exporting audio files, you can make detailed settings for the conversion algorithm. The items that can be set 

will depend on the output format.

Conversion You can choose the type of export conversion from the following two alternatives.

Select

Light Load:

The expert audio conversion that has been utilized in AudioGate Ver. 2.3.

High Quality:

High quality export audio conversion that has been added in AudioGate 3.

When exporting, CPU utilization may become very high from choosing [High Quality].

34

2.8 MHz DSD Filter Sets the additional filter for the conversion from 1 bit/2.8 MHz songs to 176.4 kHz or 192 kHz PCM files.

Select

Off

The additional filter will not be applied.

Soft Rolloff (3dB@50kHz)

 Applies a lowpass filter with soft rolloff.

Sharp Rolloff (3dB@42kHz)

Applies a lowpass filter with sharp rolloff.

35

Normalize This specifies whether normalization (increasing the level as high as possible without creating distortion) will be 

applied. If you enable this, the gain of each song will be automatically adjusted to the optimal value.

Select

Off

Normalization will not be applied. The volume level after conversion will be determined according to the origi

nal gain setting.

Individual Songs

Each song will be normalized individually to its respective maximum volume. The original gain setting will be 

completely ignored.

Current Songlist Selections (avg. level)

The maximum peak from all songs being exported will be found, and the songs will be normalized while pre

serving the volume balance between songs.

The original gain setting will be used to adjust the balance between songs.

When you use normalization, the automaticallyadjusted gain will be indicated in blue text while the files are 

being exported.

In general, converting the sample rate will require samples to be interpolated, possibly causing the peak lev

els to be slightly higher than the original data. If the songs peak level was already close to 0 dB before nor

malization, the gain may be automatically adjusted to below 0 dB.

1bit audio data may contain loud sounds that exceed the  limits of PCM. If normalization  is applied when 

converting 1bit audio to PCM, the gain may be automatically adjusted to about 3.0 dB.

When exporting in a 1bit audio format, normalization is applied referenced to 0 dBSACD, but in some cases 

the output data may slightly exceed  the reference value  (i.e.,  the  level meter  indication may exceed 0 dB). 

Even in this case, the signal is far lower than the theoretical clipping level for 1bit audio, so there will be no 

problem with the exported data as long as the clip indicator does not light up.

When normalization has completed successfully, and the file export or disc creation process has ended, a dialog 

box will ask Do you want to load the normalized gain setting to the songlist? If you choose Load, the gain set

ting used for normalization will be applied to the Control data for each song.

By applying the gain used for normalization to the Control data of each song, and then exporting with the 

Normalize box set to [Off], you can greatly reduce the processing time for subsequent exports. However if 

youve changed  the output sampling  frequency,  the peak values of  the output data will change slightly, so 

youll need to perform the normalization process once again.

36

Dither Here is where you can select the dither settings for exporting the results of the internal highprecision calculations 

as 16/24bit data.

Select

None

The results of the internal calculations are rounded up or down to 16/24bit data. If the volume of the song is 

sufficiently loud, there will be no particular problems even with this setting selected.

TPDF Dither

Standard white noise dithering will be applied. The noise floor will increase slightly, but distortion components 

can be completely suppressed.

Choose this if youll be continuing to edit using another application after exporting the song.

KORG AQUA

This method takes into account the characteristics of human auditory perception, producing a higherquality 

master by limiting the increase of quantization noise in important frequency regions.

Choose this if youre exporting a song as the final master.

AudioGate 3 is able to automatically detect situations where dithering is not necessary. Even if dithering is set 

to [TPDF Dither] or [KORG AQUA], this setting may be ignored in some cases to avoid any increase in noise.

37

Creating an audio CD or DSD disc You can create an audio CD or DSD disc from the playlist.

Each song in the songlist will be written as one track on the disc.

If the format of a song does not match the format of the disc, the format will be automatically converted before writ

ing the song to disc.

1. To create a disc that only contains the current song, click the menu button and select [File]  [Burn Disc...].

The Burn Disc setting screen will appear.

You can also create a disc from the playlist. To do so, click the side bar display button to display the side bar, 

rightclick (for the Mac. Device, controlclick) a file in the playlist, and select [Burn Disc...].

The Burn Disc setting screen will appear.

If the output source setting is [Current Song], change this setting into [Selected Playlist].

38

2. Select the format of the disc that you want to burn.

Select

3.  Select the drive youll use to burn the disc from the list of writable CD/DVD drives.

If youre creating a DSD disc, you must select a drive that can write DVDs.

4. Insert a blank disc or a rewritable disc (CDRW, DVDRW, DVD+RW) into the drive that you selected in step 3. If any other windows (other applications) are open, close them to exit those applications.

If youre creating an audio CD, you must insert a CDR or CDRW disc.

If youre creating a DSD disc, you must insert a DVDR, DVDRW, DVD+R, or DVD+RW disc, whichever your 

drive supports.

5. If you inserted a previouslyused rewritable disc, click the ERASE button. The Erase Disc dialog box will appear.

Select

Click

39

6. Choose Quick Erase or Full Erase.

Quick Erase

The discs TOC (Table Of Contents) information will be erased to make the disc usable. This allows faster pro

cessing, but in some cases a larger number of errors may occur, depending on the overwrite performance of the 

disc. If you experience problems when creating a disc, we recommend that you use Full Erase.

Full Erase (clear the Quick Erase check box)

The disc will be erased completely to make it usable. This will usually take more time than Quick Erase.

 When you erase a disc, all data will be lost. You cannot cancel or undo this operation.

7. Click the ERASE button to make the disc usable.

Click

8. Specify the disc writing speed.

Select

9. Set optional settings (see page 41) if it is required.

40

10. Click the CREATE button.

Click

A dialog box will show the progress; format conversion and the disc burning process will begin.

11. When the disc has been created successfully, the dialog box will indicate Writing completed. Do you want  to create another disc?, and the disc will be ejected.

12. If you want to create another identical disc, insert a blank disc and choose [CREATE]. If youre finished, choose [DONT CREATE].

Optional settings When creating a disc, you can edit the disc name and the normalization option. The items that can be adjusted will 

depend on the output format.

Album Title This specifies the album title of the audio CD or DSD disc.

This information is embedded in the disc, and can be displayed by players that support it.

When creating an audio CD, this is written as CDTEXT.

Use alphanumeric characters if youre creating an audio CD. Some drives may not allow you to specify this 

item.

41

Album Artist This specifies the name of the album artist for the audio CD or DSD disc.

This information is embedded in the disc, and can be displayed by players that support it.

When creating an audio CD, this is written as CDTEXT.

Use alphanumeric characters if youre creating an audio CD. Some drives may not allow you to specify this 

item.

Go Between Songs This specifies the spacing between songs on an audio CD. For a drive that supports DiscAtOnce, you can create 

a gapless CD by specifying [None] as the song spacing.

On some drives, the song spacing you specify might not be applied correctly.

When you create a gapless CD, the location of the track division (the point at which songs are divided) might 

be automatically adjusted forward by a maximum of 1/75th of a second.

Normalize Refer to Normalize on page 36.

Dither Refer to Dither on page 37.

42

Auto Update function AudioGate 3 is able to check for updates via the Internet.

By keeping your copy of AudioGate 3 updated to the latest version, you can ensure that youre getting the best per

formance and stability.

Manually checking for updates 1. Make sure that your computer is connected to the Internet, click the menu button and select the menu item 

[Help]  [Check for Updates...].

Korg Software Update will start up.

2. If a newer version of AudioGate is found, make sure that the Install check box is selected, and then click the  Download button. Downloading will begin.

When downloading is completed, the savedestination folder will appear. If you want to install the new ver

sion immediately, close AudioGate 3 and then start up the installer.

43

Automatically checking for updates You can edit settings so that AudioGate 3 will automatically check for updates when it is started.

1. Click the display section of the sample rate in the audio device.

You can also click the menu button and select [Edit]  [Preferences...] to display it.

2. Click the [Other] tab.

Click

3. If the item [Check for updates automatically] of [Auto Update] is not selected, click the check box to select it.

Click

With this setting, AudioGate 3 will check for updates when it is started up, and Korg Software Update (described 

earlier) will start up if a newer version is available.

44

Other settings

Changing the folder where temporary files are created AudioGate 3 occasionally creates temporary files when creating a disc or adding audio files.

Heres how to change the location where these temporary files are created.

1. Click the display section of the sample rate in the audio device.

You can also click the menu button and select [Edit]  [Preferences...] to display it.

2. Click the [Others] tab.

3. In [Temporary Folder], click [...] and select the desired folder.

We recommend that you specify a hard disk drive with plenty of free space as the location where the tempo

rary file folder is created.

Click

Resetting the warnings of all dialog boxes Some warning dialog boxes have an option Do not show this message again. If this check box is selected, that 

warning will no longer appear

Heres how to make these suppressed warnings appear again.

1. Click the display section of the sample rate in the audio device.

You can also click the menu button and select [Edit]  [Preferences...] to display it.

2. Click the [Others] tab.

3. In [Reset All Dialog Warnings], click the Reset button.

Click

45

Changing the type of real-time conversion You can choose the type of realtime conversion from the following two alternatives.

Light Load: 

The realtime audio conversion that has been utilized in the former version.

High Quality:

High quality realtime audio conversion that been added in Ver. 2.3

When playing back, CPU utilization may become very high from choosing High Quality.

1. Click the display section of the sample rate in the audio device.

You can also click the menu button and select [Edit]  [Preferences...] to display it.

2. Click the [Others] tab.

3. In the [RealTime Conversion] section, select conversion type.

Click

Switching background You can select your favorite background image from several different choices.

1. Click the menu button and select the menu item [View]  [Background].

2. Select the background.

46

Regarding the FLAC license

AudioGate uses the FLAC library pursuant to the following license.

Copyright (C) 2000,2001,2002,2003,2004,2005,2006,2007,2008,2009 Josh Coalson

Redistribution and use in source and binary forms, with or without modification, are permitted provided that 

the following conditions are met:

  Redistributions of source code must retain the above copyright notice, this list of conditions and the following 

disclaimer.

  Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the fol

lowing disclaimer in the documentation and/or other materials provided with the distribution.

  Neither the name of the Xiph.org Foundation nor the names of its contributors may be used to endorse or pro

mote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS AS IS AND ANY 

EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 

OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT 

SHALL THE FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 

SPECIAL,  EXEMPLARY, OR CONSEQUENTIAL DAMAGES  (INCLUDING,  BUT NOT  LIMITED  TO,  PRO

CUREMENT OF  SUBSTITUTE GOODS OR  SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 

INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 

STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT 

OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Regarding the libcurl license

AudioGate uses the libcurl library pursuant to the following license.

Copyright (c) 1996  2010, Daniel Stenberg,  .

All rights reserved.

Permission  to use,  copy, modify,  and distribute  this  software  for  any purpose with or without  fee  is hereby 

granted, provided that the above copyright notice and this permission notice appear in all copies.

THE SOFTWARE  IS PROVIDED  AS  IS, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR  IMPLIED, 

INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTIC

ULAR  PURPOSE  AND  NONINFRINGEMENT  OF  THIRD  PARTY  RIGHTS.  IN  NO  EVENT  SHALL  THE 

AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 

WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CON

NECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to 

promote  the  sale, use or other dealings  in  this Software without prior written authorization of  the  copyright 

holder.

47

List of shortcuts Function Windows Mac

Add Audio Files... Ctrl  +  O Command  +  O

Open Folder... Ctrl  +  Shift  +  O Command  +  Shift  +  O

Remove Songs Delete Delete

Export... Ctrl  +  Shift  +  E Command  +  Shift  +  E

Burn Disc... Ctrl  +  Shift  +  B Command  +  Shift  +  B

Exit Ctrl  +  Q Command  +  Q

Undo Ctrl  +  Z Command  +  Z

Redo Ctrl  +  Shift  +  Z Command  +  Shift  +  Z

Cut Text Ctrl  +  X Command  +  X

Copy Text Ctrl  +  C Command  +  C

Paste Text Ctrl  +  V Command  +  V

Select All Songs Ctrl  +  A Command  +  A

Select All Marks Ctrl  +  Shift  +  A Command  +  Shift  +  A

Divide Ctrl  +  D Command  +  D

Divide At Mark Ctrl  +  Shift  +  D Command  +  Shift  +  D

Remove All Marks Ctrl  +  Shift  +  Delete Command  +  Shift  +  Delete

Combine Ctrl  +  J Command  +  J

Channel Link Ctrl  +  L Command  +  L

Batch Edit Song Information... Ctrl  +  Shift  +  I Command  +  Shift  +  I

Preference... Ctrl  +  , Command  +  ,

Add Mark M M

Edit Song Name Ctrl  +  T Command  +  T

Switch View Ctrl  +  I Command  +  I

Select Song Above

Select Song Below

Play Selected Song Enter Enter

Play/Pause Space Space

Play From... F F

Play To... T T

Next Mark Ctrl  +  Shift  +   Command  +  Shift  +  

Previous Mark Ctrl  +  Shift  +   Command  +  Shift  +  

Next Song Ctrl  +   Command  +  

Previous Song Ctrl  +    Command  +  

Fast Forward (Hold down) (Hold down)

Rewind (Hold down)  (Hold down) 

48

Move 0.001 second Forward Shift  +   Shift  +    

Move 0.001 second Backward Shift  +   Shift  +   

Move 0.05 second Forward

Move 0.05 second Backward

Move 1 second Forward Alt  +   Option  +   

Move 1 second Backward Alt  +   Option  +    

Direct Locate G

Manualsnet FAQs

If you want to find out how the AudioGate3 KORG works, you can view and download the KORG AudioGate3 User's Guide on the Manualsnet website.

Yes, we have the User's Guide for KORG AudioGate3 as well as other KORG manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User's Guide should include all the details that are needed to use a KORG AudioGate3. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the KORG AudioGate3 User's Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This KORG AudioGate3 User's Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download KORG AudioGate3 User's Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print KORG AudioGate3 User's Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the KORG AudioGate3 User's Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.