KORG CX-3 Easy Start Guide PDF

1 of 5
1 of 5

Summary of Content for KORG CX-3 Easy Start Guide PDF

EasyStart CONTENTS Making connections 2

Playing the demo songs 2

Selecting Programs, Signature Presets 2

CX-3 Preamp types, A word on Expression/Overdrive 3

Understanding the Drawbar Select switches 3

Understanding the Rotary switches 3

Editing the Drawbar settings of a Program 4

Splitting the keyboard, Changing Split Point, Changing the Octave 4

Writing a Program 4

Restoring Factory Preload data 4

Using another keyboard as the Lower Manual 5

Overview of Edit Mode Groups 5

Brief Explanation of Extended Drawbar Mode 5

EasyStart

Tone Wheel Organ modeling system that perfectly reproduces a tone wheel organs sound-producing mechanism

Modeled parameters include leakage, key click (on and off), vintage and clean tone wheel simulations, adjustable overtones, proper foldback characteristics

Two sets of nine drawbars easily assignable to upper or lower sound

Classic percussion settings with proper polyphonically- triggered-yet monophonic performance

3 types of preamp/amp simulation with natural dynamic overdrive

Detailed rotary speaker simulation Classic Vibrato/Chorus settings 128 Programs (64 regular/64 EX mode) with many

signature artist settings

Innovative EX mode for additional harmonics and percussion harmonics (allows both sets of drawbars to be linked)

Fully polyphonic (for upper/lower, or dual manual performance)

Use a 2nd MIDI keyboard for full-range access to lower manual settings

MIDI controller capabilities, including 2nd channel transmission for each zone including velocity transmission. Every knob/switch/drawbar sends MIDI controller messages for accurate sequencing possibilities

Large 16-character LCD display 3 controller pedal inputs, MIDI In/Out/Thru Natural wood case for a timeless appearance Weighs only 38 lbs. CX-3 Version 2 information on last page of this guide!

CX-3 Modeled Combo Organ Main Features

CX3 EasyStart

2

Making connections

1. Connect the CX-3s L and R outputs to a stereo monitoring system, or plug in headphones to the headphone jack, located on the left front edge.

2. Connect the included OXP-1 expression pedal (or any compatible expression/CV pedal) to the appropriate jack on the rear panel.

! You may need to calibrate the CX-3 to recognize the pedals minimum and maximum levels. To do so, press the GLOBAL key, then press key #8 press the left CURSOR twice: the display reads, ExpPdlCalibration; press ENTER The display reads, Set Minimum:. With your heel back to the floor, press ENTER. The display now reads, Set Maximum: Move the pedal all the way forward and press ENTER press WRITE/YES and the press GLOBAL to write your new Global settings press WRITE/YES again to confirm, and then press EXIT to exit Global mode.

Playing the Demo Songs

1. Press GLOBAL, then press key#8 press WRITE/ENTER. There are nine demos, which will automatically start playing and will cycle through all of the songs. Sit back and enjoy!

2. To choose a specific demo song, make your selection with the BANK -/+keys.

3. To leave demo mode, press the EXIT key.

Selecting Programs:

1. Select a Bank with the BANK -/+keys. Then select a Program with keys # 1-8. Note: Make sure that UPPER and LOWER DRAWBAR SELECT are set to PRESET.

2. The Programs in the CX-3 are organ-ized via Vertical Banking. For instance, pressing key #8, and then cycling through the Banks, shows off Programs that mimic a tone wheel organs Church presets.

3. To select an EX Mode Program, press the EX MODE key, and then select Programs as above. Like in Normal mode, they are organ-ized with Vertical Banking!

Normal:

1 2 3 4 5 6 7 8

JazzPerc Comp Rock Gospel R&B JazzPerc2 Rock2 Church

EX Mode:

1 2 3 4 5 6 7 8

Standard Pipe Organ Attack Comp Bright Clean/Perk Combo EFX

About the Signature presets:

When you see initials in front of a sound, it is a Signature preset made by one of the consulting artists who helped to develop the CX-3. The artists are: AK Al Kooper, BA Brian Auger, BC Bill Champlin, DM Don Muro, DS - Derek Sherinian, GP Greg Phillinganes, LS Dr. Lonnie Smith, TC Tom Coster.

CX3 EasyStart

3

The CX-3 features two types of preamp sounds Type 1 models the classic tonewheel organ through a rotary speaker. Type 2 models the classic British Rock sound of a tonewheel organ run through both a rotary speaker and a tube guitar amplifier. For a couple examples of the Type 2 sound, try Presets A7 DS Balls!, B7 Turkish, C7 - SmokeInJapan, G7 BC RockSolo, or F3 Gimme Some. A word on Expression / Overdrive Notice, as you play through some of the Programs and work the OXP-1 pedal that Expression and Overdrive coincide: the sound gets grittier as it gets louder! If you dont have an OXP-1 pedal connected, the EXPRESSION/OVERDRIVE knob duplicates this function. Just be sure to check the setting of this knob if it is up all the way, your Presets may sound dirtier than desired. Conversely, if the knob is set too low, you wont be getting the extra drive that many sounds require.

Understanding the Drawbar Select switches: Control of two separate tone generators

History: The classic B-3 has an octave of reverse-colored keys to the left of each of its two manuals. Pressing one of these keys selects a Preset; except Bb, which engages Drawbar set #1, and B, which engages Drawbar set #2. The lowest C cleared any selected keys/presets.

The key in the UPPER row determines the status of the Upper tone generator; the key in the LOWER row determines the status of the Lower tone generator. Each tone generator is independently switched to one of three choices: Preset, Drawbar Set #1, or Drawbar Set #2.

! Note that the physical layout mimics the real B3 the preset is to the left and the live drawbar selects are to the right! This makes the CX-3 immediately comfortable to the experienced B3 player!

In EX Mode, the LOWER Drawbar Select keys are dark: in Extended Drawbar Mode, both of the tone generators are

used for additional harmonics and percussion, and the two sets of drawbars are working in tandem. Version 2 adds a three-drawbar tone source for the lower sound, controlled from within the Edit Mode only.

In either mode you can freely switch between the Preset and live drawbars: your basic tonality (tonewheel type, key click, preamp, EQ, percussion, rotary speaker and reverb settings) remain the same, so you can easily interact with the two sets of drawbars and return to the preset as desired.

Understanding the Rotary switches ! It is helpful (but not necessary) to connect a PS-2 footswitch to ASSIGNABLE PEDAL/SW 1s jack.

1. Select Program A-1 Organized play and hold a chord on the CX-3, and then step on the footswitch once, or press the

ROTARY FASTkey youll hear the Rotary effect gradually accelerate. Hit the FAST key again to bring the Roatary speaker back to a slow spin.

2. To completely stop the rotation of the Roatary speaker, press the STOP key. To return it to spinning, press either the SLOW or FAST keys for the desired result.

3. It s been common for jazz organists to switch between a stopped setting and a fast setting. To do this on the CX-3, you simply toggle the FAST key on and off. With Presets that come up stopped, this means that you first hit the FAST key to speed up the Rotary speaker effect, and then hit the FAST key again when you want to return to a stopped state.

! Pre-Version 2 CX-3s toggle FAST and STOP keys to switch between and stopped and fast setting.

CX3 EasyStart

4

! The Rotary Stop function can be assigned to a second PS-2 footswitch on a per-Program basis, for hands-free Rotary control!

Editing the Drawbar settings of a Program: Live drawbars in Drawbar Preset mode 1. Press the [EDIT] key, then press key #2. The Display reads UPPER and shows a graph of the programmed drawbar

levels. The display is now in an interactive state: move the Upper drawbars, and the Display reflects the change press the right cursor key [>] and the Display now reads LOWER: Now you can freely edit the Lower drawbars in the same manner.

2. To edit a Preset it is likely that you will want to first get the drawbars set exactly like the Preset. Just pay attention to the display, and move each of the nine drawbars until they catch up with the original settings in the display. Then you can make changes with the physical drawbars, accurately represeting what was stored.

Tip: Edit Mode remembers the Edit page you parked on the last time you used it. When you select another Program and

press the EDIT key, the display returns you to Group 2, the Drawbar Edit page.

Splitting the keyboard, Changing Split Point, Changing the Octave

1. Select Program A-3 Felixs Da Kat. To split the keyboard, press the SPLIT key (it will light).

2. To change the Split Point, press the EDIT key, then press key #7. The display says Split Point: Press the [-] key once to change the Split Point from C4 to B3.

3. To change the octave of the lower manual sound (below the split), press the [>] CURSOR key twice, so that the display reads Split Lower Octave: press the [+] key twice to raise the lower area of the keyboard two octaves.

! These edits will not be retained unless they are written to the Program. Writing a Program

1. Press the WRITE/ENTER key. The display reads WRITE . Note the speaker icon: when it is next to the left Bank/Program#, it allows you to hear the edited Program in the buffer.

2. Press the [>] CURSOR key once, and the speaker icon moves to the right Bank/Program #. This allows you to audition the destination Program before you destructively write over it. Use the [+] or [-] keys if you wish to find another destination.

3. Press the WRITE/ENTER key twice to execute the Write operation.

Restoring Factory Preload data

1. Hold down keys #2 and #7 while turning on the power (power switch located on the back of the CX-3).

2. The display will prompt Load Factory Data? press the WRITE/ENTER key to complete the operation.

CX3 EasyStart

5

Using another keyboard as the Lower Manual Taking advantage of the two independent tone generators:

1. Using a short MIDI cable, connect the MIDI Out of any MIDI keyboard/controller to the MIDI In of the CX-3 and set its MIDI channel to Ch. 2.

2. The parameter for the MIDI Channel of the CX-3s Lower tone generator defaults to Ch 2, but it can be set to any channel: Press GLOBAL, then press key #4, and CURSOR [>] four times until the display reads MIDI Lower Rx ch:.

3. If you call up a Program that has an active Split (SPLIT Key is lit), press the SPLIT Key once to turn it off. You now have a dual-manual tonewheel organ, with each manual having its own fully-polyphonic (61-note) tone generator.set of drawbars!

Overview of the Edit Mode Groups

Group 1 LEVELS Output, tone wheel type, overtone level, leakage noise level, key on and key off click levels Group 2 DRAWBARS Settings of the drawbar levels (some different parameters in EX Mode) Group 3 PERC Percussion level, soft perc. Offset, normal perc, attenuation, perc fast decay, perc slow offset Group 4 AMP Amp Type, Amp Gain, Tone: treble, middle and bass Group 5 REVERB Reverb type, time, mix level, and routing (before and after the Rotary effect) Group 6 ROTARY Horn/Rotor balance, Horn and Rotor fast and slow speeds, Horn and Rotor Down, Up and Stop

transitions, miking characteristics Group 7 SPLIT PT/PEDAL Split Point, Split Octaves, Pedal assignments (different parameters in EX Mode) Group 8 NAME Rename the Program

Brief Explanation of Extended Drawbar Mode The CX-3 is the only organ to extend the harmonic possibilities of the tone wheel organ tradition! Drawbar set #1 is governing the levels of the standard nine harmonics of a traditional tonewheel organ, while Drawbar set #2 controls the extended harmonics of EX Mode. This included four additional tone generator harmonics, and four additional percussion tone harmonics.

The first four drawbars of set #2 add additional, higher harmonics to the basic tone-generating system. There are four Presets for these extended harmonics. These tables can be found in GLOBAL mode, Page 8 > scroll right.

EX Drawbar #5, [2 2/3] controls the level of the entire traditional percussion section when it is ON. EX Drawbars #6 and 7 provide 16 and 5 1/3 percussion harmonics; and EX Drawbars #8 and 9 provide a percussion

harmonic of the pitches assigned to EX Drawbars #1 and 2. CX-3 Version 2 Features

Rebalanced drawbars for better performance across the full key range (Drawbar Level Curve=Mellow). Original setting (Bright) is available for those that like the extra scream in the upper octaves.

Noise parameter added to recreate the standing-state noise of an old, beat-up organ when desired. Improved Vibrato/Chorus emulation as well as Rotary Speaker algorithm improvements Speaker simulator bypass in the Preamp for a whole new world of tonalities. Added a 4th Reverb algorithm (Dark) Added a three-drawbar sound source for the lower m

Manualsnet FAQs

If you want to find out how the CX-3 KORG works, you can view and download the KORG CX-3 Easy Start Guide on the Manualsnet website.

Yes, we have the Easy Start Guide for KORG CX-3 as well as other KORG manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Easy Start Guide should include all the details that are needed to use a KORG CX-3. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the KORG CX-3 Easy Start Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This KORG CX-3 Easy Start Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download KORG CX-3 Easy Start Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print KORG CX-3 Easy Start Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the KORG CX-3 Easy Start Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.