Contents

A few words from Greg Mackie.
- Selecting channels for a Mute Group.
- MAIN MIX (L/R) fader.
- Group Master Section.
- BREAK button/indicator
- MONITOR section
- STEREO IN knob
- Meter section.
- FX Master Section.
- Talkback.
- A better way.
- A traditional Monitor Mix.
- Musician's Phones.
- Aux Master AFL buttons and indicator.
- Aux Master.
- Master Control Section
- Further reading about mixing.
- A few more tips on equalization.
- MID EQ (stereo channels)
- Source Mic / Line (stereo channels).
- PFL switch / indicator
- Same as Mono Channels
- Different than
- Channel fader
- Bus Assign switches
- 20 (Signal present) LED.
- Mute button/ indicator.
- Pan.
- FX Send.
- Aux PRE Switch.
- Aux Sends
- EQ (Equalization), Mono Channels
- Comp (Compressor) and indicator.
- Gain Control.
- Mono Channel Strips.
- Channel 25-26 (or Channels 17-18) and Phones
- Musician Phones (AUX OUT 3 OR 4 + L/R INJECT)
- Aux Out.
- Group Out (sub buses).
- Monitor Out.
- Main Out.
- Talkback input.
- Foot Switch input.
- USB Out
- USB In
- USB input / output.
- Stereo input channels.
- Mono input channels.
- Power input connector
- POWER switch
- Power supply section
- Why do we start with the back of the mixer?
- How the band is set up on the mixer.
- The "pusha-bunch-'0' buttons" approach to creating a mute group.
  - MUTE GROUPS TO THE RESCUE.
- Un-doing the "pusha-bunch-'0' buttons" approach to creating a mute group.
- Program a Mute Group
- Rack mounting (MW-2408 only)
- Settings that can be saved
- More on Factory Reset (restoring the factory default settings).
- Other GLOBAL options.
- Recalling a Global Scene
- Saving a Global Scene
- Global menu (scene memory, settings, initialization).
- Locking the state of the feedback suppressor
- Feedback Suppressor: Seting routing options.
- Recalling an Equalizer Setting (continued)
- Recalling an Equalizer Setting.
- Saving Equalizer settings.
- Adjusting (Narrow Mode) Continued
- Adjusting EQ Narrow Mode EQ (31 /9-band).
- Adjusting 9-band EQ (Wide Mode).
- Selecting Narrow or Wide 9-band equalization.
- Recalling a Dynamics preset.
- Saving a Dynamics setting.
- FEEDBACK SUPPRESSOR
- EQUALIZATION
- SoundLink Signal Processing*
- Gee, they don't sound like effects!
- Recalling a DFX preset.
- Saving a Digital Effects setting.
- Using the TAP button to set the delay time.
- Editing an effect
- Applying a Digital Effect
- Selecting the DFX type
- Digital Effects (DFX).
- Saving and Recalling Mute Groups.
- Combining Hard Mutes and Mute Groups.
- Adding to or subtracting channels from a Mute Group.
- Creating a Mute Group.
- "Hard muting".
- OL (Overload) LED.

KORG MW-2408 User Manual PDF

Download

Pages 65

Year 2020

Language(s)

1 of 65

Summary of Content for KORG MW-2408 User Manual PDF

Page 1

MW-1608 USER MANUALMW-2408

SOUNDLINK

HYBRID ANALOG/DIGITAL MIXERS

Page 2

H ook-up/Back panel

A nalog Controls

D igital Controls

Important Safety Instructions

Operating Manual - nX, nXe, and nXp Power Amplifiers

WARNING: THIS APPARATUS MUST BE EARTHED

Important Safety Instructions Consignes de scurit lire attentivement

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature ac- companying the device.

Le symbole de la flche dans un triangle quilateral symbolisant la foudre est prvu pour sensibiliser lutilisateur la prsence de tension de voltage non isole lintrieur de lappareil. Elle pourrait constituer un danger de risque de dcharge lectrique pour les utilisateurs. Le point dexclamation dans le triangle quilatrale alerte lutilisateur de la prsence de consignes quil doit dabord consulter avant dutiliser lappareil.

1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. 6. Do not use this apparatus near water. 7. Clean only with dry cloth. 8. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 9. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus. 10. Do not defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third ground- ing prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 11. Protect the power cord from being walked on or pinched par- ticularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 12. Only use attachments/accessories specified by the manufac- turer. 13. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 14. Unplug this apparatus during lightning storms or when unused for long periods of time. 15. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or ob- jects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

1. Lisez ces instructions. 2. Conservez ces instructions. 3. Observez les avertissements. 4. Suivez ces instructions. 5. Pour rduire le risque de feu ou la dcharge lectrique, ne pas exposer cet appareil pour pleuvoir ou l'humidit. 6. Ne pas utiliser lappareil prs de leau. 7. Le nettoyer laide dun tissus sec. 8. Ne pas bloquer les ouvertures de ventilation, installer selon les consignes du fabricant. 9. Eloigner des sources de chaleur tel: radiateurs, fourneaux ou autres appareils qui produisent de la chaleur. 10. Ne pas modifier ou amputer le systme de la mise terre. Une prise avec mise terre comprend deux lames dont une plus large ainsi quune mise terre: ne pas la couper ou la modifier. Si la prise murale naccepte pas la fiche, consulter un lectricien pour quil remplace la prise dsute. 11. Protger le cordon de secteur contre tous bris ou pincement qui pourraient lendommager, soit la fiche murale ou lappareil. 12. Nemployer que les accessoires recommands par le fabricant. 13. Nutiliser quavec les systmes de fixation,chariots, trpied ou autres, approuvs par le fabricant ou vendus avec lappareil. 14. Dbrancher lappareil lors des orages lectriques ou si inutilis pendant une longue priode de temps. 15. Un entretient effectu par un centre de service accrdit est exig si lappareil a t endommag de quelque faon: si il a t expos la pluie,, lhumidit ou sil ne fonctionne pas normalement ou quil a t chapp.

The lightning flash with arrowhead symbol, with- in an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is int nded to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the device.

1. Read and keep these instructions. 2. Heed all warnings. 3. Follow all instructions. 4. WARNING: To reduce the risk f fire

or electric shock, do not expose this apparatus to rain or moisture.

5. Do not use this apparatus near water. 6. Do not block any ventilation openings.

Install in accordance with the manufacturers instructions.

7. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus.

8. Do not defeat the safety purpose of the polarized or grounding type plug. A

larized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding

FCC Compliance Suppliers Declaration of Conformity (for USA) Responsible Party: KORG USA INC Address: 316 S. SERVICE RD. MELVILLE, NY Telephone: 1+ 631-390-6500 Equipment Type: HYBRID ANALOG/DIGITAL MIXER Model: MW-2408 / MW-1608

This device complies with part 15 of the FCC Rules. Operation is subject to the fol-

This product complies with IEC62368-1 safety standards. Safety indication label is located on the bottom panel of the unit.

prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult

an electrician for replacement of the obsolete outlet.

9. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

10. Use only with the cart, stand, tripod, bracket, or table specified by the manu- facturer, or sold with

the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

11. Unplug this apparatus during lightning storms or when the apparatus has been damaged in any way, such as power- supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

12. WARNING: The apparatus must be connected to an AC power output (MAINS) with a protective grounding (earthing) co nection.

13. Where a main AC connection (MAINS) or appliance coupler, such as power strip is used as the disconnect device, the disconnect device shall remain readily operable.

14. Only use attachments/accessories specified by the manufacturer.

15. Clean only with dry cloth.

16. This product must be disposed of correctly.

This symbol indicates that this product must not be disposed of with household waste, according to the WEEE Directive (2012/19/ EU) and/or your national or regional law. This product

should be taken to a collection center licensed for the recycling of electronic waste and electronic equipment (EEE). The mishandling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the efficient use of natural resources. For more information concerning EEE recycling, contact your local city office or your household waste collection service.

lowing two conditions: 1)This device may not cause harmful interference; 2) This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful inter- ference in both a commercial and residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interfer- ence will not occur in a particular installation. If this equipment does cause harmful interfer- ence to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the follow- ing measures:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4. When connecting this mixer to another product use only quality shielded cables.

5. Use AC power outlets (MAINS) that are on a different branch circuit (circuit breaker or fuse), or employ a power filter/ conditioner.

6. Consult the dealer or an experienced radio/TV technician for help.

7. Unauthorized changes or modification to this system can void the users authority to operate this equipment.

Page 3

H ook-up/Back panel

A nalog Controls

D igital Controls

Greg Mackie founded TAPCO in the 70s to make the first practical band mixers. Then in 1990, he formed the eponymous company truly revolutionized both live and studio recording for cash-strapped musicians and seasoned pros alike. After retiring from that company in 2002, hes been busy designing for others and himself.

Welcomeand thank you!

Born in London, UK, Peter worked at Trident Audio for 18 years (10 years as Head of R&D) assembling, testing and designing now-legendary high-end analog studio and mixers. He moved to the USA to join Mackie Designs, staying for 7 years as VP of Engineering and Chief Designer for Digital Mixers and related products. In 2003 Peter founded Stonepower Ltd as an independent professional audio design house, working on projects for numerous brands.

A few words from Greg Mackie. Ive been designing mixers for over 40 years.

A few years ago, I helped create a compact all-digital mixer. For a while, I used it in my own live mixing, which includes talent shows, open mic nights and three-bands-in-one-night at a club. Here, I had to deal with feedback, groups Id never mixed before, more feedback, micro- phone mishandling and timid vocalists, three mics on one act and sixteen on the nextoh, did I mention feedback?

I discovered that the all-digital interface simply could not let me make changes and corrections fast enough too many menus and scrolling! On the other hand, I loved the equalization, effects, and presets of digital.

SoundLink is my and Peter Watts hybrid solution superbly interpreted and executed by KORG. It gives you analogs instant control for the emergencies that inevitably happen in live mixing, but with the power of high-quality digital where it counts.

You have made a good choice. We are glad that you have chosen a KORG SoundLink MS mixer. Here are some of the highlights:

True hybrid design developed with mixer design legends Greg Mackie and Peter Watts

24 x 8 x 2 or 16 x 8 x 2 models Peter Watts-designed HiVolt mic preamps, with more headroom than any comparably-priced mixer (+/-16.5V internal voltage on mono and stereo channels)

Velvet Sound A/D & D/A converters with 0.004% THD,

L/R Monitor, and XLR main outs, eight Group Outs, four XLR Aux Outs, two Musicians Phones outputs linked to Aux 3 & 4, front panel Headphone output, stereo USB output

Eight mono/four stereo individual output buses (true 8-bus design)

Unique Musicians Phones Monitor Section gives two musicians individual control of how much of me versus the total mix they hear

Only mixer in its class with Mute Groups to quickly create and recall various input combinations of on-stage musicians

Mono channels have Peter Watts-derived HI (12k), MID (250 hz - 5k sweepable) and LO (100 Hz) EQ; Stereo channels feature HI, HI MID (2.5k), LO MID (250 hz) and LO EQ

Digital section includes three each of Peter Watts-designed Compressors, Limiters and Noise Gates, each with editable, recallable parameters

Three ingenious 9/31-band ParaGraphic equalizer that each address nine bands out of a possible 31

Twenty of KORGs renowned 32-bit digital effects 10 at once, with save and recall user settings

Foot switch control for FX Talkback to L/R or to Aux 1-4 Peter Watts-inspired rack-mount- processor-grade, one-knob Compressor on all mic channels

Best Automatic Feedback Control of any compact mixer

USB stereo output/input Input for recording out and backing tracks in

Optional foot switch Super-useful touches such as all-XLR speaker outputs and enhanced Break Switch with 1/8 input

Silky-smooth, long-life ALPS faders and rotary controls

MW-2408 fits in a 19 rack

Page 4

H ook-up/Back panel

A nalog Controls

D igital Controls

IMPORTANT! First set correct input levels

Operating Manual - nX, nXe, and nXp Power Amplifiers

WARNING: THIS APPARATUS MUST BE EARTHED

Important Safety Instructions Consignes de scurit lire attentivement

Level Setting Procedure ten simple steps.

This procedure is so important that we put it on the pages before the Table of Contents, diagrams of various mixer parts or anything else. Its that critical!

Correctly setting each chan- nels GAIN control achieves the maximum amount of signal headroom before distortion and the least possible amount of noise.

You will need:

Your new mixer

Sound sources such as a micropho e, guitar, drum kit, keyboards, music player, etc. whatever gear you will be using during a sound mixing session;

The right cables to hook your sound sources to the mixer. (We go into more detail about connectors later on);

Monitor speakers or head- phones.

Let's begin.

Plug your SoundLink mixer into a wall socket.

Set a channels GAIN (volume) too low and there will be noise (hiss) in that channel, even when no voice or instrument is present.

If GAIN (volume) is set too high, the signal will distort and sound scratchy when the singer or instrument gets very loud.

Connect monitor speak s to the SoundLink mixer rear panel MAIN OUT (1a) or MONITOR OUT (1b) jacks, or plug headphones into the PHONES jack (1c).

Lets start with Chann l 1.

Make sure that Channel 1s PAN, COMP, and a l four EQ knobs are set to the center (12 oclock) posit on.

Page 5

H ook-up/Back panel

A nalog Controls

D igital Controls

Avoid ever lighting the red LED.

2 3

Trying to set levels by saying Test- ing 1, 2, 3 into the mic doesnt really work. Instead, sing some vocals or play an instrument at a realistic level.

Hit a cymbal, tom or kick drum as hard as the drummer will during the performance; jam on that guitar; honk that sax; make sure keyboard output level is set at normal output. You get the idea.

You can check levels at any time by pressing a channel's PFL (PreFad- er Listen) button. Then make channel level changes as necessary.

Plug a micro- phone or other audio source into the first channels rear panel MIC IN socket.

Turn ON the mixers rear panel POWERswitch. Then turn on your monitors or their amp.

Sing into the mic or play an instrument at the volume the musician or presenter will be using during a per- formance.

Press Channel 1s PFL (Pre Fader Listen) button. The orange LED just above the button should light up.

While watching the Main Level Display at

the right of the mixer, turn Channel 1s GAIN knob clockwise until the LED above "0" flickers occasionally but not very often.

Okay. Heres the less than- fun news: you need to do this procedure for every channel that you are using for your mu- sical or A/V performance. As you probably know, this is

called a Sound Check. Come early to a major concert and youll wit- ness the same instrument-by-in- strument, mic-by-mic procedure being performed.

The good news is, your MW- 1608 or MW-2408 is now ready to mix at its best settings with maximum headroom and lowest noise.

Take our word for it: These steps are worth it!

Ten Steps to Level Setting

This is the desired range

Page 6

H ook-up/Back panel

A nalog Controls

D igital Controls

Table of Contents

If youre a beginner its a good idea to read through this whole manual. Weve tried to use non-techy language, and explain stuff most other manuals dont.

The biggest mistake beginners make is to not take advantage of all the time-saving, prob- lem-solving, make-you-sound- better features on their mixer.

Well, the second biggest mis- take; the first is not doing proper level setting.

We hope that this manual can help you get the best perfor- mance possible. Read on!

If youre experienced SoundLink has some features and twists you dont usually find in mixers at this price point. For the Been there, done that crowd, weve marked these in the Table of Contents like this...

The nav bars are clickable.

A few words from Greg Mackie. ............. 3

Why do we start with the back of the mixer? ................................................... 8

Power supply section ......................................... 9 POWER switch ..................................................... 9 Power input connector....................................... 9 Mono input channels. ......................................... 9 Stereo input channels. ....................................... 9 USB input / output............................................. 11 USB In ................................................................. 11 USB Out .............................................................. 11 Foot Switch input. .............................................. 11 Talkback input. ................................................... 11 Main Out. ............................................................12 Monitor Out. .......................................................12 Group Out (sub buses). ......................................12 Aux Out. ..............................................................13 Musician Phones ...............................................13 Channel 25-26 (or Channels 17-18) and Phones ........................................................13

Mono Channel Strips. ...........................19 Gain Control. ......................................................19 Comp (Compressor) and indicator. .....................................................19 EQ (Equalization), Mono Channels .................. 20 Aux Sends ...........................................................22 Aux PRE Switch. .................................................22 FX Send. ..............................................................22 Pan. .....................................................................23 Mute button/indicator. ......................................23 OL (Overload) LED. .............................................23 20 (Signal present) LED. .................................23 Bus Assign switches ...........................................23 Channel fader .....................................................23

Different than Mono Channels ............ 24

Same as Mono Channels ...................... 24 PFL switch / indicator....................................... 24 Source Mic / Line (stereo channels). ............... 24 MID EQ (stereo channels) ..................................25 A few more tips on equalization.......................25 Further reading about mixing. .........................25

Master Control Section ....................... 26 Aux Master. ........................................................ 26 Aux Master AFL buttons and indicator. .......... 26 Musician's Phones. ........................................... 26 A traditional Monitor Mix vs. a better way. .....27 Talkback..............................................................27

FX Master Section. .............................. 28 Meter section. ................................................... 28 STEREO IN knob ................................................ 28 MONITOR section .............................................. 28 BREAK button/indicator .................................. 29

Group Master Section. ........................ 29 MAIN MIX (L/R) fader. ...................................... 29 Selecting channels for a Mute Group. ............. 30 How the band is set up on the mixer. .............. 30 The "pusha-bunch-'0' buttons" approach to creating a mute group. .................................... 30

MUTE GROUPS TO THE RESCUE. ...........31 Un-doing the "pusha-bunch-'0' buttons" approach to creating a mute group. ...............31 Program a Mute Group...................................32 "Hard muting". ...................................................33 Creating a Mute Group. .....................................33 Adding to or subtracting channels from a Mute Group. .......................................... 34 Combining Hard Mutes and Mute Groups. ......35 Saving and Recalling Mute Groups. ................ 36

Digital Effects (DFX). ........................... 37 Selecting the DFX type ......................................37 Applying a Digital Effect ................................... 38 Editing an effect ................................................ 38 Using the TAP button to set the delay time. ... 39 Saving a Digital Effects setting. ....................... 39 Recalling a DFX preset. ...................................40 Gee, they don't sound like effects! ..................40 SoundLink Signal Processing* ..........................41

Equalization ........................................41 Feedback Suppressor ........................................41 Saving a Dynamics setting. ..............................44 Recalling a Dynamics preset. ..........................44 Selecting Narrow or Wide 9-band equalization. ...............................46 Adjusting 9-band EQ (Wide Mode). ................. 47 Adjusting EQ Narrow Mode EQ (31 /9-band). .48 Adjusting (Narrow Mode) Continued ..............49 Saving Equalizer settings. ................................ 50 Recalling an Equalizer Setting. ........................ 50 Recalling an Equalizer Setting (continued) ....51 Feedback Suppressor: Routing o ptions. .........52 Locking feedback suppressor state ..................53

Global menu .......................................54 Saving a Global Scene ...................................... 54 Recalling a Global Scene ...................................55 Other GLOBAL options. .....................................55 More on Factory Reset (restoring the factory default settings). ................................................57

Reference Specification.....................................................58s Block Diagram ...................................................60 Settings that can be saved ...............................60 Rack mounting (MW-2408 only) ......................64

Page 7

H ook-up/Back panel

A nalog Controls

D igital Controls

Page 8

H ook-up/Back panel

A nalog Controls

D igital Controls

Hooking up your SoundLink mixer.

First things first. The only difference between the SoundLink MW-2408 and the MW-1608 is the number of channels.

The controls, functions and

Why do we start with the back of the mixer? Because hooking stuff up is the first thing youre going to want to do. And most all of the connec- tions are on the back

connections are identical. All the drawings and photos in this man- ual are of the MW-1608 because this PDF fits small screens better

Well start with a guided tour of the SoundLink back panel; then some sample hook-ups for vari- ous applications.

Page 9

H ook-up/Back panel

A nalog Controls

D igital Controls

Hooking up your SoundLink

Power supply section

POWER switch Turns this units power on (ON) or off.

Turning the power off and then immediately on might cause malfunctions.

Wait at least five seconds between operations of the power switch.

When turning phantom power on, make sure that no elctronic external device is connected to a mic input jack. Failing to observe this precaution might cause an external device to malfunction.

Do not connect or discon- nect a channels MIC jack immediately after turn- ing phantom power off. Doing so may cause a malfunction.

Power input connector Connect the included power cord here. First connect the pow- er cord to your SoundLink, and then plug the power cord into an AC outlet.

48V MIC PHANTOM switch Turns the PHANTOM power on/ off. Turn this on if youre using a device that operates using phan- tom power, such as a condenser mic or a direct box.

If this is on, the 48V indicator just below the L/R meter is lit, and DC+48V is supplied to the MIC IN (XLR jack) of each input channel.

Before turning phantom power on/off, reduce the GAIN knob or fader of each channel to 0 (-). The noise that occurs when phantom power is turned on/ off might be amplified to output a high-volume noise that could damage your hearing or make a device malfunction.

Mono input channels. The balanced mono XLR MIC IN jacks (round ones with three pins in them) are for hooking up either condenser or dynamic mi- crophones. Behind those input sockets are our HiVolt micro- phone preamplifiers with excep- tional headroom and clarity.

The balanced LINE IN inputs are for mono (1-channel) com- ponents such as guitar direct boxes.

Stereo input channels. Only the LINE IN jacks are actually stereo. They can be used

for keyboards, drum ma- chines, and audio/video

Page 10

H ook-up/Back panel

A nalog Controls

D igital Controls

When youre just getting into pro sound, you hear these phrases batted around a lot. They represent the two kinds of audio connectors and cables youre going to encounter Theres a big difference.

An unbalanced cable has two conductors a signal wire and a ground wire. You can easily

iden- tify an unbal- anced cable by its connectors because each wire requires only two con- ductors at the connector. A standard TS (or tip-sleeve) guitar cable an unbalanced cable: so is a

standard RCA cable used for many audio/video components such as DVD players.

An unbalanced cable does a decent job of rejecting noise over short, but unfortunately, the wire itself also acts like an antenna and picks up noise in

long runs. Unbalanced cables

should not be more than about-20 feet (4-6 meters) in length, especially when used in noisy environments and with signals that are medium level to begin with, such as those from keyboards or MP3 devices, etc. The connector on the end of an unbalanced TS (Tip-Sleeve) jack has two sections.

A balanced cable has three conductors in the connector and three wires in the cable. Because

1 2

Balanced versus unbalanced: whats the deal here?

Hooking up your SoundLink

devices such as DVD players or feeds from a laptop (the balanced mono XLR MIC IN jack on each stereo channel is for connecting a mono microphone only).

The stereo LINE IN jacks are marked LEFT (MONO) and RIGHT. If you are only connecting a mono input, use the LEFT (MONO).

Mic In and Line In jacks on these channels CANNOT be used at the same time.

How do stereo input chan- nels know if theyre being sent a mono or stereo input? You tell them via the SOURCE MIC/ LINE LINE button on each stereo channel.

In the LINE button up position, the channel defaults to mono mi- crophone input; press LINE and the channel is ready to receive left and right components of a balanced stereo input.

Page 11

H ook-up/Back panel

A nalog Controls

D igital Controls

of this, balanced cables can support much longer cable runs. Even shorter runs will

often use balanced wiring to protect against noise.

In a pro sound system, wiring for microphones, and the interconnect cables be- tween active speakers, signal processors, and amps, etc., are typically balanced. Standard connectors designed for use with balanced signals are XLR and TRS (Tip-Ring-Sleeve).

3 USB input / output. This port is used to input and output USB audio. (44.1/48 kHz, 16/24-bit)

Connect it to a PC/MAC or an iOS device (e.g., iPhone/iPad) with a USB 2.0 connection.

This operates with Windows, Mac OS, or iOS default drivers.

If you are using an ASIO-compatible application on Windows, install the KORG Basic Audio Driver which is available from the KORG website.

To connect to an iPhone/iPad that is equipped with a Lightning connector, you will need a Lightning to USB 3 camera adaptor. When connecting an iPhone/ iPad, we recommend that you enable "airplane mode."

USB In The signal that is input from the connected device is sent to the right-most stereo input channel: Channels 23 & 24 on the MW- 2408; Channels 15 & 16 on the MW-1608.

The signal is input before the channel EQ. You can use the channel EQ to adjust the tone.

USB Out This is sort of a digital duplicate of the MAIN OUTPUT output jacks. The left/right Main out is sent to a laptop, tablet or cell phone. is output to the connected device.

Use the MAIN MIX (L/R) fader to adjust the output level.

Foot Switch input. When you plug a foot switch into this jack, you can make announcements to the audience, yell at the band members, tell bad jokes, etc.

We recommend a KORG PS-1 or PS-3 foot switch.

Talkback input. Plug a dynamic mic into this jack for giving instructions to musi- cians or presenter on stage, or to make general announcements to your audience / congregation.

Hooking up your SoundLink

Page 12

H ook-up/Back panel

A nalog Controls

D igital Controls

Group Out (sub buses). Bus, sub group, or sub bus are all names for a path along which you can route one or more audio sig- nals to a particular destination. They are mixers inside your mix- er and are the reason SoundLink mixers are called 8 bus.

Sub Groups ( sub buses) are extremely useful for organizing and controlling multiple chan- nels from one fader. Lets say you have three back-up singers, each with their own mic input. To control the level, you would need

Main Out. These are your Sound- Links main outputs

for connecting to main PA loud- speakers or power amplifiers. Use the main L/R fader to control the volume output.

You can use both the XLR and TRS outputs at the same time. In other words, four total outputs.

Hooking up your SoundLink

Monitor Out. Connect these to your

studio monitor (or amps pow- ering your passive monitors) if you are using the SoundLink in a studio situation. Use the MONITOR knob to adjust the level.

Normally, this out- put if fed by the MAIN L/R bus. When the AFL/PFL function is enabled, this outputs the signal of a specific channel or bus.

to simultaneously move three faders in unison.

Instead, you can route the singer channels to a sub group titled Back Up by selecting one

of Bus Assign buttons next to each of the vocal faders (we picked 3-4).

Now all three vocal channels will be routed into Sub Group 3-4. and controlled by the Sub Group Mix 3-4 fad-

er. Press the SUB GRP ASSIGN TO L/R button and control its level in the overall mix with one fader.

Page 13

H ook-up/Back panel

A nalog Controls

D igital Controls

If you want to add the Sub Group to your main L/R mix, press one of Sub Group Assign to L/R buttons.

This is also especially useful for drums that are mic-ed with lots of microphones. Six mics; one fader. But we digress.

Among other tasks, the GROUP OUT jacks are useful for record- ing. You can distribute Sound- Links 16 or 24 inputs into 8 outputs fed to an audio/digital interface.

Aux Out. These balanced XLR outputs are used to send signals to the performers monitor speakers, in-ear monitors or to an external effect processor.

Create up to 4 AUX mixes using the AUX controls on each channel strip. There is more explanation further on in this manual.

Musician Phones (AUX OUT 3 OR 4 + L/R INJECT)

This is a unique Greg Mackie fea- ture that lets two musicians per- fect their monitor mixes without having to upset the AUX setting of all the channels. Described in detail farther on.

Channel 25-26 (or Channels 17-18) and Phones 1/8" input for MP3 players. " jack for headphones.

In review, to build a Sub Group:

Use the small buttons to the right of the channel faders to pick which channels you want in your Sub Group. Press the same button on each channel.

That routes the channels signals to the Sub Group bus youve chosen.

If you have a special purpose for the Sub Group, use the GROUP OUT jack on the back to send it to a subwoofer, balcony fill, extra monitor, etc

Hooking up your SoundLink

Page 14

H ook-up/Back panel

A nalog Controls

D igital Controls

If the phrase Your results may vary ever fit somewhere, its here. These four hook-up examples are just that: examples. They are intended to show various options that are possible with Sound-Link Chances are you won't use every input and output like we have shown. But you could.

Hooking up your SoundLink TYPICAL BAND

Page 15

H ook-up/Back panel

A nalog Controls

D igital Controls

Hooking up your SoundLink SMALL to MEDIUM CHURCH or LARGE CHURCH ACTIVITY HALL

Page 16

H ook-up/Back panel

A nalog Controls

D igital Controls

Hooking up your SoundLink CORPORATE PRESENTATION or EVENT CENTER

Page 17

H ook-up/Back panel

A nalog Controls

D igital Controls

Hooking up your SoundLink 8-CHANNEL RECORDING

Page 18

H ook-up/Back panel

A nalog Controls

D igital Controls

Hooking up your SoundLink ZOMBIE APOCALYPSE

Page 19

H ook-up/Back panel

A nalog Controls

D igital Controls

Mono Channel Strips. All these massed knobs and buttons makes the top of a mixer look somewhat like a Boeing 747 airplane cockpit. But never fear. It's more simple than it looks. Each strip is the same controls repeated in long, tall rows.

With the exception of the fader, you will probably set the con- trols on each channel strip just once before your event (during

the sound check when you do the all-important Level Setting procedure.)

Gain Control. Weve already covered this con- trol somewhat in the Level Setting Procedure, which is its primary use. The rotary control sets the level of the signal

entering the channel. For weak signals, you turn it clockwise; overly strong signals, counter- clockwise. You get your cues from the Main L/R meter levels. Stay around 0dB.

HPF (High Pass Filter) The High Pass Filter, also called a Low Cut Filter, reduces fre-

quencies under 100Hz (lowest bass).There are a lot of reasons to do this.

All have to do with cutting out rumble. Rumble happens through bad mic handling, reso- nance from a flimsy stage, trucks driving by, air conditioning rum- ble, wind noise if youre perform- ing outside, herds of stampeding elephants, among other things.

Rumble can suck a lot of pow- er from your PA system. Even if your system is capable repro- ducing under-100Hz sound, its generally boomy, unpleasant and muddles your overall PA sound. If your system doesnt do well reproducing ultra-low frequen- cies, HPF lets the PA sound better above 100Hz.

While helping edit this manual Greg said we were being too gentle. According to him HPF should be used ALL THE TIME on ALL CHANNELS except low bass stuff such as kick drums, bass guitar, etc.

Comp (Compressor) and indicator.

Think of the Compressor as an automatic volume control.

Until recently this incredibly

useful tool was not available on analog mixers, We didnt invent one-knob compression, but we think we did a better job of it.

Compression is the process of lessening the dynamic range between the loudest and quiet- est parts of an audio signal. This is done by reducing the louder signals.

It is truly useful on vocal and bass guitar.

Consider the example of a tim- id lead vocal where some words and phrases are sung more quiet- ly or mumbled. A normal fader setting will lose the vocalist when they get quiet.

But if you raise the level so that

Analog Controls

Page 20

H ook-up/Back panel

A nalog Controls

D igital Controls

20 50 100 200 500 1k 2k 5k 10k 20k

Bass VOCALS Soprano

KEYBOARD

KICK DRUM

BASS GUITAR

FLOOR TOM

GUITAR

SNARE / GUITAR / PERCUSSION ATTACK

SNARE / GUITAR /ACOUSTIC INSTRUMENT CLARITY

CYMBALS/STRING INSTRUMENTS / SNARE SIZZLE

HI-HAT / CYMBALS

Analog Controls

Without compression, wide swings in dynamics.

Compression levels things out.

EQ (Equalization), Mono Channels Equalization is another name for tone control. But EQ is a lot more sophisticated on Sound- Link mixers than tone control is on a car stereo or MP3 player.

Both mono and stereo Sound- Link channels split the frequency range into three parts: Hi, Mid (midrange) and Lo.

Every instrument covers a broad range of frequencies.

the mumbled syllables come though, the rest of the vocal will be overwhelming. No single fader setting gives a good balance because the difference between the highest and lowest signal levels (the "dynamic range") is too large.

Compressors remedy this by reducing a sounds dynamic range: compression reduces the level differences between the quieter mumbled and un-mum-

bled words, making it easier to find a single fader setting that works. The compressor does this by turning down (or compress- ing) the louder signals so that they match the quieter signals

more closely an automatic vol- ume control.

A similar trick works for vo- calists who have a consistent dynamic range. Compression can raise them in the mix without having to increase their actual volume.

Compression is also useful for presenters and pastors who speak in a normal voice most of the time BUT SOMETIMES SHOUT!!!!, and for mic-ing drums where compression can add punch.

Note that there is also a digital Compressor function that works with AUX 1, AUX 2 and main L/R and has several variable parame- ters. We cover that further on.

Greg's mixes-almost- every- weekend advice on equaliztion: Find the problem areas and CUT as needed. Then consider boosting. Otherwise you "chase your tail".

Page 21

H ook-up/Back panel

A nalog Controls

D igital Controls

Analog Controls

20 50 100 200 500 1k 2k 5k 10k 20k

WEIGHT WARMTH KNOCK BITE CLARITY AIR & SPARKLE

20 50 100 200 500 1k 2k 5k 10k 20k

LO MIDRANGE HI

+15dB

50 100 200 500 1k 2k 5k 10k 20k

+15dB

50 100 200 500 1k 2k 5k 10k 20k

+15dB

50 100 200 500 1k 2k 5k 10k 20k

Bass guitar, kick drums, etc. cov- er the low end. Vocals sit in the midrange. The cymbals of a drum kit will carry the high-end sizzle. Other instruments like piano and acoustic guitar provide low-mid warmth.

Since most instruments cov- er a wide range of frequencies, its nearly impossible to settle on a single EQ control to repre- sent an instrument, but rather a range. Another way to approach EQ is by the effect that various frequency ranges affect instru- ments tone, shown in the chart below.

To quote Izotope, a company we really trust (https://www. izotope.com/en/learn/princi- ples-of-equalization.html) Remember that equalization is a problem-solving procedure. A good

better to cut than to boost, mainly because the human ear is more used to a reduction than to an augmentation in intensity of fre- quencies.

Above is the frequency dis- tribution of SoundLink mono channel EQ.

There two con- trols for MID? Because they adjust different things: One knob for amount (15dB), and one knob for FREQ

(frequency).Its center frequency can be moved anywhere from 250Hz to 5,000Hz which makes it much more useful. At 250Hz, it can work on the tone of guitar,

approach to equalization is to listen carefully to the so- loed track and come up with a list of things you might want to improve or correct.

Always keep your equal- ization boost/cut at a rea- sonable level. As a general rule, avoid cutting or boosting by more than 6 dB unless absolutely neces- sary. If for some reason you see that some of your EQ settings go over this limit try to question why and see if there is a better solution to the problem such as mic placement.

Also keep in mind that you will have to make more small adjust-

ments every time you add tracks to the mix since the frequencies and respective ranges of the other in- struments affect the way an instru- ment sounds.

As a general rule, it is always

upped bass guitar, percussion, low men's voice, etc.

At 1,000Hz, it's right in the middle of the vocal range

At 5K, you can enhance or reduce acoustic guitar, women's vocals, and percussion such as snare, high-hat etc.

Page 22

H ook-up/Back panel

A nalog Controls

D igital Controls

Analog Controls

the AUX OUT sockets to floor monitors or in-ears.

AUX 1 and 2 are pre-fad- er. A pre-fader AUX send routes the signal out of the mixer BEFORE it passes through the channel fader. You can move the volume fader to your hearts con- tent but its not going to af- fect the outbound volume. Pre-fader is best for moni-

tor mixes. If music is faded down when a presenter is speaking or a singer is reading scripture or speaking, the monitor volumes for the musicians dont change they still hear everything they need. Plus level does not change for fader moves, avoiding feed- back in the monitor system.

A post-fader AUX send routes the signal out of the mixer AF- TER its gone through the fader. If you move the volume fader up and down, that AUX send vol- ume goes up and down, too. Use

Aux Sends Think of Sound- Links four AUX sends as four extra mixers. You

can add a portion the channel strips signal into one of four separate buses and then route those mixes to various plac- es. The most common use is to create monitor mixes for the musicians. You can add whatev- er combination and amount of various channels and then route this mix through an AUX MASTER level control and through one of

post-fader AUX for on-air broadcasts, assisted listen- ing, church crying rooms and foyers, club and restau- rant lobbies and restrooms, and stereo recording devic- es via SoundLinks USB out. In the case of stereo input, the left and right signals are mixed and sent to the AUX bus. You can also use AUX 3 as Left and AUX 4 as right to create an analog mix output.

AUX 1 and 2 are always PRE-fader. For AUX 3 and 4, you can use the PRE switch to select either PRE or POST

Aux PRE Switch. See above.

FX Send. Your SoundLink mix- er has 20 extremely

realistic effects, each savable and recallable; each with adjustable parameters.

The FX control determines the amount of the channel signal that is sent to the FX bus. The FX Send is always post-fader

Page 23

H ook-up/Back panel

A nalog Controls

D igital Controls

Analog Controls

The mic preamp input level could be set at the edge of clipping but not actually clipping. BUT, if you boost EQ particularly low EQ it adds more gainand the channel will distort- The OL indicator reads the output of the mic preamp AND the out- put of the EQ section.

Pan. On a car stereo, this would be referred to as the BALANCE control. PAN adjusts the left/right balance of the channels sound in the main mix.

Mute button/ indicator. Enables/disables the chan- nels mute function. In other words, it excludes the channel from the mix.

If MUTE is enabled, all signals being sent to AUX, FX, and the buses specified by the assign switches are all

muted. The PFL function

can always be used, regardless of the mute setting.

When the mute function is enabled, the indica- tors are lit as follows.

Red: Muted by the channels MUTE button

Orange: Muted by the MUTE GROUP function or the BREAK function

While the MUTE button is a standard feature on small mix- ers, we have seriously enhanced it with Mute Groups. See page 30 (Mute Groups) for a complete

explanation of this extremely useful function

OL (Overload) LED. This indicator lights when the channels input signal gets within 3dB of clipping level. Clipping is a term for a signal that exceeds that capability of the internal circuitry, resulting in audible distortion just what you try to avoid by Level Set- ting during sound check.

20 (Signal present) LED. When this LED flashes or lights continuously, the channel is re- ceiving a signal of at least -20 dB. It's a good way to see if whatever is connected to the channel input is actually making sound.

Bus Assign switches If you want to create a submix, you press one of more of these buttons. That sends the chan- nels signal to a SUB GROUP MIX BUS as covered on page 12.

Channel fader Adjusts the output level of the signal that is input to the chan- nel. If a channel is not being used reduce the fader to (off)to avoid adding unwanted signals to your mix.

Page 24

H ook-up/Back panel

A nalog Controls

D igital Controls

Stereo Channels Same and Different

Analog Controls

PFL switch / indicator Enables ( ) or disables ( ) the

PFL (pre-fader listen) function. If this button is enabled, the

signal before adjustment by the channel fader (pre-fader) is output sent to the PHONES jack and the MONITOR OUT output jacks.

When in the Enable position, the indicator is lit.

Stereo channels have a few dif- ferent controls and many identi- cal ones.

Different than Mono Channels

TRS stereo Line inputs Mic/Line switch No Compressor function 2-band fixed MID EQ Shared channel controls (9/10, 11/12 combined etc.)

Same as Mono Channels Input Gain Hi Eq Lo Eq Aux Sends FX Pan Mute OL & -20 LEDs Bus Assign switches 60mm fader PFL switch

Source Mic / Line (stereo channels). Switches the channel setting according to the input jack(s) used.

Set this to MIC ( ) if using the rear panel MIC

IN jack. Set it to LINE

( ) if using the LINE IN jack(s).

The MIC IN jack and LINE IN jack cannot be used at the same time.

Page 25

H ook-up/Back panel

A nalog Controls

D igital Controls

20 50 100 200 500 1k 2k 5k 10k 20k

LO MIDRANGE HI

20 50 100 200 500 1k 2k 5k 10k 20k

LO MIDRANGE HI

Analog Controls

MID EQ (stereo channels)

Stereo channel MID equaliza- tion consists of two controls with fixed band centers: 2.5kHz high Mid and 250 Hz low Mid.

That makes it different than mono channel MID EQ.

Whereas mono MID is one

band that can be "slid" around, stereo EQ is just two separate fixed bands, one at the high and one at the low end of the mid- range band.

Stereo Channel Midrange Equalization

Mono Channel Midrange Equalization

A few more tips on equalization. Almost everything can be improved with equaliza- tion. At least TRY various settings. Equalize with your ears. Don't stare at the EQ knob: close your eyes and listen. Focus on the overall mix. Youre far better off EQ-ing your channels so that every instrument has its own place in the mix, rather than trying to make each instrument sound good in isolation. Cut first; boost second. In a live setting, very few people will be hearing both left and right speak- ers equally so its best not to pan things dead left or right.

Further reading about mixing. https://www.liveabout.com/the-basics- of-live-sound-1817739

https://www.behindthemixer.com/ eighteen-live-audio-mixing-tips- tricks/

https://ledgernote.com/columns/mix- ing-mastering/audio-mixing-for-dum- mies/

Page 26

H ook-up/Back panel

A nalog Controls

D igital Controls

Analog Controls

Master Control Section This seemingly complicated checkerboard of controls is actually a dozen smaller, easi- er-to-understand sections, each with a unique purpose.

Some you will hardly ever use. Some play important and regular parts in key functions such as Mute Groups and Sub Groups.

Aux Master. As we noted earlier, the AUX buses are like four separate additional mixers.

The AUX sends on each channel strip determine how much of that channel

goes into an AUX bus. The AUX MASTER controls de-

termine the levels that are out- put to the AUX OUT jacks on the mixer back.

Aux Master AFL buttons and indicator. Enables ( ) or disables ( ) the AFL function.

When this is enabled, the sig- nals that have been adjusted by

the AUX MASTER (14) knobs can be monitored via MONITOR or PHONES.

When AFL is enabled, the orange LED lights up.

Musician's Phones. This is a Greg Mackie innovation that takes the complication out of creating the monitor or stereo in-ear mixes that your perform- ers want.

Page 27

H ook-up/Back panel

A nalog Controls

D igital Controls

Analog Controls

A traditional Monitor Mix. You choose channels the per-

former wants to hear (usually lots of their own instrument or voice) and route those signals to an AUX bus. Then through of the AUX OUT jacks on the mixer back, and on to their floor wedge or in-ears.

That's the way it's always been done.

A better way. But what happens if the per-

former wants more of the main mix in their monitor mix? That used to require tweaking every channel's AUX send.

Plug the musicians phones into AUX 3 or AUX 4's 1/4" output.

Turn up the PHONES LEVEL part way.

Create a mono mix for that musician using channel aux sends.

Inject a little bit of L/R signal to create L/R ambi- ance using the INJECT L/R controls.

INJECT L/R knobs adjust the level at which the MAIN L/R bus signal is mixed into the AUX 3 & 4 buses. This is mixed both into the AUX 3 & 4 output and into the MUSICIANS PHONES out- put.

Remember that AUX 3 and AUX 4 are sepa- rate so you can create a "stereo" mixer.

Talkback. This knob adjusts the volume and selects the destination of the microphone plugged into the TALKBACK jack on the back of the SoundLink. You can send Talkback to all of your AUXs at once (for yelling at

the band) or the MAIN L/R for announce- ments to

your audience. Pressing the L/R button sends

the TALKBACK audio to the MAIN OUT output jacks. The TALKBACK volume is not affected by the MAIN MIX fader. When this is en- abled, the indicator blinks.

Pressing AUX Sends the TALK- BACK audio to the AUX OUT 14 output jacks.

The TALKBACK volume is not af- fected by the AUX MASTER knob. When this is enabled, the indica- tor blinks.

Page 28

H ook-up/Back panel

A nalog Controls

D igital Controls

Analog Controls

FX Master Section. Adjusts the effect volume and muting of digital effects. FX TO AUX (1/2) knobs adjust the volume of the effect sent to the AUX 1/2 buses. FX MUTE button and indicator en- ables/disables the mute function. FX RETURN fader adjusts the vol- ume of the effect sent to the MAIN L/R bus.

Meter section. Level meter indicates the signal level of the monitor bus. Be careful that L/R out- put only momentarily goes into the orange indicators. The average signal should bounce over and under "0"db.

The ANALYZER screen (page 58) analyzes the same signal as shown in the level meter, and indicates the level of each frequency region.

CUE indicator indicates the signal source of the monitor bus that is shown in the level meter. Lit: The signal of the channel or bus for

which PFL or AFL is enabled Unlit: The signal of the MAIN MIX bus 48V indicator lights when the MIC phan- tom power supply is on.

STEREO IN knob Adjusts the vol- ume of the front panel STEREO IN jack.

The signal ad- justed by this knob

is sent directly to the MAIN OUT output jacks. It is not muted by BREAK, etc., since that is when it's often used for music between sets or before a service.

MONITOR section Adjusts the output level of each monitor source.

The monitor output will out- put either the MAIN L/R bus or the monitor bus. The signal source is indi- cated by the CUE indicator.

If you connect a foot switch (sold separately), you can control FX MUTE remotely. If mute is enabled using a foot switch, the indicator blinks.

Page 29

H ook-up/Back panel

A nalog Controls

D igital Controls

Analog Controls

BREAK button/indicator MUTE for all input channels (Chan- nel 124 on the MW-2408; Chan-

nel 116 on the MW-1608) in a single action.

Press the button again to return to the previous state.

When this is enabled, the indicator blinks.

The following inputs and buses are not muted by the BREAK function.

STEREO IN input TALKBACK input PFL bus of each channel

Group Master Section. Here is where you blend your Sub Group mixes into the Main L/R mix or determine their level if you're routing them out of the rear panel GROUP OUT jacks.

SUB GROUP ASSIGN TO L/R switches These switches send the signal of each group to the MAIN L/R bus.

SUB GROUP MASTER faders Adjusts the output level sent to the Main L/R (if assigned) and to the Sub Master Outputs. PFL switches/indicators. These switches let you audition each group's signal in the moni- tor.

When they are enabled, the signal that has been adjusted by each SUB GROUP MIX fader is sent

to the PHONES jack and to the MONITOR OUT output jacks. If this is enabled, the indicator is lit.

MAIN MIX (L/R) fader. Adjusts the level of the MAIN MIX.

The signal adjusted by the MAIN MIX fad- er is also sent to the USB port output.

Page 30

H ook-up/Back panel

A nalog Controls

D igital Controls

Analog Controls

DI DI DI

1 2 3 4 5 6 7 8 9 30

MUTE GROUPS Channel mutes are found on most every analog and digital mixer. Press the Mute button and the channel becomes silent

Easy peasey. But SoundLink mixers make it

easier.

Selecting channels for a Mute Group. On SoundLink mixers, the MUTE button glows red to show that the channel is muted.

Here's a example application where you're mixing a whole band most of the time, but for a couple of slow songs, there's just a vocalist, an acoustic guitar through a direct box and a snare drum.

The last thing you want to do is reduce each fader volume to (0,) because you lose your care- fully-set levels.

Instead, you press NINE mute buttons. Nine mute buttons turn red. Nine channels are removed from the mix.

How the band is set up on the mixer.

The "pusha-bunch-'0' buttons" approach to creating a mute group.

Page 31

H ook-up/Back panel

A nalog Controls

D igital Controls

DI DI DI

1 2 3 4 5 6 7 8 9

blink blink blink blinkDI DI DI

Analog Controls Mute Groups

The vocalist, acoustic guitar and brushes on the snare makes for a pleasant, slower interlude in the band's otherwise intense set. It ends.

You quickly press NINE MUTE buttons again, UN-muting the channels so you're ready for the whole band to play the next song

Eighteen button pushes in rapid succession.

You could get calluses pushing all those buttons (or more likely, delay the next song while you punch lots of MUTE buttons)!

MUTE GROUPS TO THE RESCUE.

Press and momentarily hold down MUTE GROUP button A. It will blink orange, which means it's ready to be "programmed".

Now press the nine MUTE buttons.

Un-doing the "pusha-bunch-'0' buttons" approach to creating a mute group.

Page 32

H ook-up/Back panel

A nalog Controls

D igital Controls

1 2 3 4 5 6 7 8 9

Analog Controls Mute Groups

Each muted channel but- ton/indicator will turn orange.

You're "telling" Mute Group A which channels to include.

Press the blinking MUTE GROUP A button. You have just created a genuine Cer- tified Mute Group.

Mute Group A is now stored for the duration of the session. Press MUTE GROUP A and nine channels are instantly muted.

You've pressed one button, instead of nine buttons.

Mute Groups have a lot of uses because in many mixing situa- tions, some of the channels are not being used. And when a chan- nel isn't being used, it should be off.

For example muting parts of the band when they're not playing . Or selecting just a few channels like in our mic/guitar/

Program a Mute Group

Recall 9 mutes with a single button push. Tres mucho coolness.

Page 33

H ook-up/Back panel

A nalog Controls

D igital Controls

Analog Controls Mute Groups

snare example. In a business presentation, you

might have one person giving a speech, and then three micro- phones being passed around in the audience for questions.

And in a church service, mute groups are invaluable. Set up one for Pastor Sermon, one for Praise Band, another for Choir and Soloist, and one for Pastor+Choir+Praise Band for hymns.

Pushing just one MUTE GROUP button is far easier for a vol- unteer than sorting out which channels to un-mute.

Since you can store up to 10 unique Mute Groups as part of Global Settings, you can have "Mute Groups for any occasion".

"Hard muting". This is a name for when you

just directly mute a channel. The Mute indicator for that channel turns red.

Creating a Mute Group.

Press and hold a MUTE GROUP button (A through D) until it starts blinking.

Mute the channels you want in the Mute Group. Each channel indicator will blink orange after you press it.

Press the designated MUTE GROUP button. It will turn off.

The Mute Group is now programmed. At any time, just press the MUTE GROUP button and all of those channels will be muted with orange indicator lights.

Hard muting: pick a channel; press the MUTE button.

Bask in the warm red glow.

The Mute Group is now ready.

Pick the channels you want to have in the Mute Group.

Page 34

H ook-up/Back panel

A nalog Controls

D igital Controls

Analog Controls Mute Groups

Adding to or subtracting channels from a Mute Group.

Press and hold the pre-pro- grammed MUTE GROUP button (C in our example below) until it starts blink- ing.

The channels in the Mute Group will all blink orange.

Either press a blinking channel to turn it off, or press a new channel MUTE button to add it to the Mute Group.

Press the designated blink- ing MUTE GROUP button. It will turn off. The Mute Group is now edited.

You can turn on more than one Mute Group at the same time, in effect temporarily adding to the Group.

Press and HOLD is only needed to program or modify (re-program) a Mute Group

Pick the Mute Group that you want to edit.

Page 35

H ook-up/Back panel

A nalog Controls

D igital Controls

Analog Controls Mute Groups

Combining Hard Mutes and Mute Groups. In our example below, we have "hard"muted some channels. Their indicators glow red.

Now we're simply going to create a Mute Group:

Press and hold a MUTE GROUP button until it starts blinking orange. The red Hard Muted indicators will turn off.

Select channels for your Mute Group. They will blink orange.

Press the MUTE GROUP button.

The red Hard Mute indicators come back on. The Mute Group has been created.

Page 36

H ook-up/Back panel

A nalog Controls

D igital Controls

Analog Controls

HYBRID ANALOG/DIGITAL MIXER

GLOBAL

SETUPANTI-FEED OVERVIEW ANALYZER SELECTTAP

RESET

: REV HALLP01 -02 : REV ROOMP03-04 : REV VOCALP05-06

: REV STAGEP07-08 : REV PLATEP09- 10 : REV SPRINGP 1 1 - 1 2

: DELAYP13-16 : MOD FXP17-20 : TEST SOUNDP21-24

MULTIBAND DIGITAL PARAGRAPHIC EQ

DYNAMICS

FEEDBACK

EQUALIZER

DFXINFO VIEW

MAIN L/R

AUX 2

AUX 1

MAIN L/R

AUX 2

AUX 1

MENU EXIT

SELON

GLOBAL

SETUPANTI-FEED OVERVIEW ANALYZER SELECTTAP

RESET

: REV HALLP01 -02 : REV ROOMP03-04 : REV VOCALP05-06

: REV STAGEP07-08 : REV PLATEP09- 10 : REV SPRINGP 1 1 - 1 2

: DELAYP13-16 : MOD FXP17-20 : TEST SOUNDP21-24

FEEDBACK DFXINFO VIEW

MENU EXIT

SELON

GETTING STARTED

Now the Mute Group mutes (orange) can be added to any hard mutes (red) that you have on.

Saving and Recalling Mute Groups.

Mute Groups are really a part of hybrid SoundLink's digital sec- tion. You can store and recall ten Mute Groups as part of Global Settings.

For instructions on saving and recalling Mute Groups via Global Settings, click to page 54.

Digital Controls

HYBRID ANALOG/DIGITAL MIXER

GLOBAL

SETUPANTI-FEED OVERVIEW ANALYZER SELECTTAP

RESET

: REV HALLP01 -02 : REV ROOMP03-04 : REV VOCALP05-06

: REV STAGEP07-08 : REV PLATEP09- 10 : REV SPRINGP 1 1 - 1 2

: DELAYP13-16 : MOD FXP17-20 : TEST SOUNDP21-24

MULTIBAND DIGITAL PARAGRAPHIC EQ

DYNAMICS

FEEDBACK

EQUALIZER

DFXINFO VIEW

MAIN L/R

AUX 2

AUX 1

MAIN L/R

AUX 2

AUX 1

MENU EXIT

SELON

SoundLink mixer's digital sec- tion packs a lot into a modest space. It has more direct, hands- on buttons and controls than most mixers so that you can quickly assign and adjust more things.

For example, just below the LCD screen are 9 buttons that let you select various options from the screen instead of having to

HYBRID ANALOG/DIGITAL MIXER

GLOBAL

SETUPANTI-FEED OVERVIEW ANALYZER SELECTTAP

RESET

: REV HALLP01 -02 : REV ROOMP03-04 : REV VOCALP05-06

: REV STAGEP07-08 : REV PLATEP09- 10 : REV SPRINGP 1 1 - 1 2

: DELAYP13-16 : MOD FXP17-20 : TEST SOUNDP21-24

MULTIBAND DIGITAL PARAGRAPHIC EQ

DYNAMICS

FEEDBACK

EQUALIZER

DFXINFO VIEW

MAIN L/R

AUX 2

AUX 1

MAIN L/R

AUX 2

AUX 1

MENU EXIT

SELON

Each equalizer frequency band has its own SELECT button for fast access.

The buttons can also select and scroll during various procedures.

drill through more menus. An encoder knob is rotated to

set values, or pushed down to enter a command.

When you turn on your Sound- Link mixer you get a KORG logo, splash screen and then this "home" screen:

The three columns show where you have assigned DYNamics, Graphic EQualizer and Digital Effects.

As you begin to add signal processing, the Status Overview screen will look something like

this.

Page 37

H ook-up/Back panel

A nalog Controls

D igital Controls

HYBRID ANALOG/DIGITAL MIXER

GLOBAL

SETUPANTI-FEED OVERVIEW ANALYZER SELECTTAP

RESET

: REV HALLP01 -02 : REV ROOMP03-04 : REV VOCALP05-06

: REV STAGEP07-08 : REV PLATEP09- 10 : REV SPRINGP 1 1 - 1 2

: DELAYP13-16 : MOD FXP17-20 : TEST SOUNDP21-24

MULTIBAND DIGITAL PARAGRAPHIC EQ

DYNAMICS

FEEDBACK

EQUALIZER

DFXINFO VIEW

AUX 21

MAIN L/R

AUX 2

AUX 1

MENU EXIT

SELON

MAIN L/R

AUX

Digital Controls Digital Effects

SoundLink's has a lot of powerful digital features.

In order to help you navigate, we have created a sub-Table of Contents showing on which page various functions are explained. Click on one of these red rectan- gle links.

Digital Effects (DFX). DFX provides 16 types of effects and tone generator function that can output reference tones use- ful for PA work.

You can edit an effect and save it as a user type (maximum 30).

Selecting the DFX type

Press the DFX section's SELECT button. This screen appears.

Effects

Dynamics

Equalization

Feedback

Global Scenes

Type Details Parameter / effect

P01: Rev Hall P02: Rev Hall Warm

Provides the reverberation of a hall. "Rev Hall Warm" provides a warm tone.

Time (Time that the reverberation continues)

HiDamp (High frequency attenua- tion of the reverberant sound over time)

P03: Rev Room P04: Rev Room Warm

Provides the reverberation of a small room. "Rev Room Warm" provides a warm tone.

P05: Rev Vocal P06: Rev Vocal Warm

Provides reverberation suitable for vocals. "Rev Vocal Warm" provides a warm tone.

P07: Rev Stage P08: Rev Stage Warm

Provides the reverberation of a mid-sized stage.

"Rev Stage Warm" provides a warm tone.

P09: Rev Plate P10: Rev Plate Warm

Provides the reverberation of a plate reverb unit.

"Rev Plate Warm" provides a warm tone.

P11: Rev Spring P12: Rev Spring Warm

Provides the distinctive reverberation of a spring reverb unit of the type often built into a guitar amp.

"Rev Spring Warm" provides a warm tone.

Time (Time that the reverberation continues) Sway (Amount of modulation for the spring)s

P13: Delay Analog Adds a delayed sound. This models a warm- toned analog delay.

Time (Delay time) Feedback (Amount of repeated delay sounds)

P14: Tape Echo Adds a delayed sound. This models a tape echo that balances warmth and clarity.

P15: Delay Standard Adds a delayed sound.

P16: Delay SDD3000 Adds a delayed sound. This produces a clear delay sound modeled on the Korg SDD3000 digital delay.

Use the dial or the function buttons to select a type.

Dial: Turn the dial to move the cursor to the desired effect type, and then press the dial to con- firm.

Function buttons: Use ""/"" to change the effect type. When you press a button, the effect changes immediately, so you can listen to the effects as you switch through them.

Click to navigate to that Digital Section.

Page 38

H ook-up/Back panel

A nalog Controls

D igital Controls

Channel strip FX Sends Function Buttons

DFX SELect Encoder Knob

FX MUTE

FX RETURN

Digital Controls Digital Effects

Applying a Digital Effect

Make sure that the FX MUTE indicator is off (dark).

Raise the FX RETURN fader to the "0" position.

Use each channel's FX SEND knob to adjust the level sent to FX.

Use the FX RETURN fader to adjust the overall level of the effect sent to the Main L/R or Auxes.

Editing an effect You can edit the effect parame- ters to adjust the effect. The result of editing the parame- ters will differ depending on the effect type. For details, refer to the chart on the previous page.

Select an effect type.

Press the function button indicated as "Edit."

Use the function buttons to select a parameter.

Turn the encoder knob to make adjustments.

To return to the previous screen, press the EXIT but- ton or the function button indicated as "TYPE."

Page 39

H ook-up/Back panel

A nalog Controls

D igital Controls

HYBRID ANALOG/DIGITAL MIXER

GLOBAL

SETUPANTI-FEED OVERVIEW ANALYZER SELECTTAP

RESET

: REV HALLP01 -02 : REV ROOMP03-04 : REV VOCALP05-06

: REV STAGEP07-08 : REV PLATEP09- 10 : REV SPRINGP 1 1 - 1 2

: DELAYP13-16 : MOD FXP17-20 : TEST SOUNDP21-24

MULTIBAND DIGITAL PARAGRAPHIC EQ

DYNAMICS

FEEDBACK

EQUALIZER

DFXINFO VIEW

AUX 2

MAIN L/R

AUX 2

AUX 1

EXIT

SELON

MAIN L/R

AUX 1

SAMPLE

HYBRID ANALOG/DIGITAL MIXER

GLOBAL

SETUPANTI-FEED OVERVIEW ANALYZER SELECTTAP

RESET

: REV HALLP01 -02 : REV ROOMP03-04 : REV VOCALP05-06

: REV STAGEP07-08 : REV PLATEP09- 10 : REV SPRINGP 1 1 - 1 2

: DELAYP13-16 : MOD FXP17-20 : TEST SOUNDP21-24

MULTIBAND DIGITAL PARAGRAPHIC EQ

DYNAMICS

FEEDBACK

EQUALIZER

DFXINFO VIEW

MAIN L/R

AUX 2

AUX 1

MAIN L/R

AUX 2

AUX 1

MENU EXIT

SELON

Digital Controls Digital Effects

If you press the RESET button, the currently- edited parameter returns to its default value.

If you long-press the RESET button, the currently-edited effect is initialized.

Depending on the settings, the sound might be distorted or produce oscillation.

Using the TAP button to set the delay time. For delay effects, you can set the delay time by pressing the TAP button at the desired interval. You can use the TAP button for the following effects.

- Delay Analog

- Tape Echo

- Delay Standard

- Delay SDD3000

Select a delay effect type.

The TAP button blinks at intervals of the time param- eter setting.

Repeatedly press the TAP button at the interval that you want to specify. The time is specified

according to the average value of the

intervals between button presses.

Saving a Digital Effects setting. You can edit an effect and save it as a user type (maximum 30), and then recall it at any time.

After you have made adjust- ment to an effect, press the MENU button, which will light up green.

On-screen you will see Save User Type and Erase User Type options.

Use the button under Select to pick Save as User Type.

Scroll up or down with and , or the encoder knob, pick an Empty loca- tion and press Select.

Page 40

H ook-up/Back panel

A nalog Controls

D igital Controls

HYBRID ANALOG/DIGITAL MIXER

GLOBAL

SETUPANTI-FEED OVERVIEW ANALYZER SELECTTAP

RESET

: REV HALLP01 -02 : REV ROOMP03-04 : REV VOCALP05-06

: REV STAGEP07-08 : REV PLATEP09- 10 : REV SPRINGP 1 1 - 1 2

: DELAYP13-16 : MOD FXP17-20 : TEST SOUNDP21-24

MULTIBAND DIGITAL PARAGRAPHIC EQ

DYNAMICS

FEEDBACK

EQUALIZER

DFXINFO VIEW

AUX 2

MAIN L/R

AUX 2

AUX 1

EXIT

SELON

MAIN L/R

AUX 1

HYBRID ANALOG/DIGITAL MIXER

GLOBAL

SETUPANTI-FEED OVERVIEW ANALYZER SELECTTAP

RESET

: REV HALLP01 -02 : REV ROOMP03-04 : REV VOCALP05-06

: REV STAGEP07-08 : REV PLATEP09- 10 : REV SPRINGP 1 1 - 1 2

: DELAYP13-16 : MOD FXP17-20 : TEST SOUNDP21-24

MULTIBAND DIGITAL PARAGRAPHIC EQ

DYNAMICS

FEEDBACK

EQUALIZER

DFXINFO VIEW

AUX 2

MAIN L/R

AUX 2

AUX 1

EXIT

SELON

MAIN L/R

AUX 1

Gee, they don't sound like effects!

There are four more "effects" at the bottom of the scrolling menu.

They are test tones that are designed to be used with the SoundLink Spectrum Analyzer.

1Khz Sine Wave Slow Sweep (through the whole frequency spectrum)

Sweep Fast (through the whole frequency spectrum)

White or Pink Noise How they are best used is be-

yond the scope of this manual. To blatantly borrow from

Wikipedia," A spectrum ana- lyzer measures the magnitude of an input signal versus frequency within the full frequency range of the instrument. By analyzing the spectra of electrical signals, domi- nant frequency, power, distortion, harmonics, bandwidth, and other spectral components of a signal can be observed."

Digital Controls Digital Effects

The screen will query you as to whether you want to save the setting. Hit Save to finish.

Note that you can also save a DFX setting in the GLOBAL menu's "Save Scene" and "Memorize Mode" (page 54.)

Recalling a DFX preset. Here's how to recall DFX settings that you saved.

In the DFX section, press the DFX SELECT button.

A list of thirty user spaces, num- bered U01 to U30, will appear.

Scroll through them with the arrow buttons or en- coder knob and pick an existing preset.

Press straight down on the encoder knob or the button under "Select" to choose a preset.

The recalled Digital Effects settings are applied.

To return to the previous screen without recalling DFX settings, press the EXIT button or the func- tion button indicated as "Exit."

Page 41

H ook-up/Back panel

A nalog Controls

D igital Controls

Digital Controls

SoundLink Signal Processing* Here are your options:

DYNAMICS Hard Compression

Main L/R AUX 1 AUX 2

Soft Compression Main L/R AUX 1 AUX 2

Noise Gate Hard Main L/R AUX 1 AUX 2

Noise Gate Soft Main L/R AUX 1 AUX 2

Limiter Main L/R AUX 1 AUX 2

Each of these dynamics types is simultaneously available on L/R, Aux 1 and Aux 2. That's more processing power than any com- parably price mixer!

The Limiter is especially useful on wedge monitors or in-ear-sys- tems fed by Aux 1 or 2. It abrupt- ly "limits" output to protect musician's eardrums.

A Noise Gate allows a signal above a certain selected thresh- old to pass through. If the input signal falls below the threshold, the signal gets cut off and no sound is heard.

It can also elminate footsteps during quiet services and cere- monies.

EQUALIZATION 9-band EQ Wide

Main L/R AUX 1 AUX 2

9 / 31-band EQ Narrow Main L/R AUX 1 AUX 2

By "9 / 31-band EQ" we mean that you can single out and boost/cut nine specific bands out of 31. They can be close togeth- er or sprinkled through out the whole 63 to16k range. This per- fect for "notching out" persistent feedback.

FEEDBACK SUPPRESSOR Main L/R AUX 1 AUX 2

There are no specific adjust- ments for the Feedback Suppres- sor. It just works and surpris- ingly well at that.

You have three Feedback

Suppressors at your service, as- signable to Main L/R, Aux 1 and Aux 2, and that's a good thing. A s noted about the Limiter, sudden feedback in floor wedges or in- ear monitors can be very harmful to the ears. The Suppressors assignable to Aux 1 and Aux 2 can prevent problems.

*We differentiate between signal processing and effects. Effects are the highly realistic digital effects such as reverbs and echos that SoundLink is capable of. Signal processing are ways to change a sound's character.

Page 42

H ook-up/Back panel

A nalog Controls

D igital Controls

HYBRID ANALOG/DIGITAL MIXER

GLOBAL

SETUPANTI-FEED OVERVIEW ANALYZER SELECTTAP

RESET

: REV HALLP01 -02 : REV ROOMP03-04 : REV VOCALP05-06

: REV STAGEP07-08 : REV PLATEP09- 10 : REV SPRINGP 1 1 - 1 2

: DELAYP13-16 : MOD FXP17-20 : TEST SOUNDP21-24

MULTIBAND DIGITAL PARAGRAPHIC EQ

DYNAMICS

FEEDBACK

EQUALIZER

DFXINFO VIEW

AUX 21

MAIN L/R

AUX 2

AUX 1

MENU EXIT

SELON

MAIN L/R

AUX

HYBRID ANALOG/DIGITAL MIXER

GLOBAL

SETUPANTI-FEED OVERVIEW ANALYZER SELECTTAP

RESET

: REV HALLP01 -02 : REV ROOMP03-04 : REV VOCALP05-06

: REV STAGEP07-08 : REV PLATEP09- 10 : REV SPRINGP 1 1 - 1 2

: DELAYP13-16 : MOD FXP17-20 : TEST SOUNDP21-24

MULTIBAND DIGITAL PARAGRAPHIC EQ

DYNAMICS

FEEDBACK

EQUALIZER

DFXINFO VIEW

AUX 21

MAIN L/R

AUX 2

AUX 1

MENU EXIT

SELON

MAIN L/R

AUX

SAMPLE ONLY

HYBRID ANALOG/DIGITAL MIXER

GLOBAL

SETUPANTI-FEED OVERVIEW ANALYZER SELECTTAP

RESET

: REV HALLP01 -02 : REV ROOMP03-04 : REV VOCALP05-06

: REV STAGEP07-08 : REV PLATEP09- 10 : REV SPRINGP 1 1 - 1 2

: DELAYP13-16 : MOD FXP17-20 : TEST SOUNDP21-24

MULTIBAND DIGITAL PARAGRAPHIC EQ

DYNAMICS

FEEDBACK

EQUALIZER

DFXINFO VIEW

AUX 21

MAIN L/R

AUX 2

AUX 1

MENU EXIT

SELON

MAIN L/R

AUX

HYBRID ANALOG/DIGITAL MIXER

GLOBAL

SETUPANTI-FEED OVERVIEW ANALYZER SELECTTAP

RESET

: REV HALLP01 -02 : REV ROOMP03-04 : REV VOCALP05-06

: REV STAGEP07-08 : REV PLATEP09- 10 : REV SPRINGP 1 1 - 1 2

: DELAYP13-16 : MOD FXP17-20 : TEST SOUNDP21-24

MULTIBAND DIGITAL PARAGRAPHIC EQ

DYNAMICS

FEEDBACK

EQUALIZER

DFXINFO VIEW

AUX 2

MAIN L/R

AUX 2

AUX 1

MENU EXIT

SELON

MAIN L/R

AUX 1

HYBRID ANALOG/DIGITAL MIXER

GLOBAL

SETUPANTI-FEED OVERVIEW ANALYZER SELECTTAP

RESET

: REV HALLP01 -02 : REV ROOMP03-04 : REV VOCALP05-06

: REV STAGEP07-08 : REV PLATEP09- 10 : REV SPRINGP 1 1 - 1 2

: DELAYP13-16 : MOD FXP17-20 : TEST SOUNDP21-24

MULTIBAND DIGITAL PARAGRAPHIC EQ

DYNAMICS

FEEDBACK

EQUALIZER

DFXINFO VIEW

AUX 2

MAIN L/R

AUX 2

AUX 1

MENU EXIT

SELON

MAIN L/R

AUX 1

Digital Controls Dynamics

Dynamics Our example task is to put a Limiter on Aux 1.

Press the DYNAMICS AUX 1 button. It will blink red.

The screen will change to a dynamics screen.

Press the white button un- der the word TYPE on the LCD screen.

The types of dynamics will be shown in a scrolling list.

Press the buttons under the and screen triangles OR rotate the jog wheel to ar- rive at the dynamics effect you desire.

To select a dynamic effect ( in our example, Limiter), press and hold the button under Select OR push down on the encoder wheel until you feel a click.

Page 43

H ook-up/Back panel

A nalog Controls

D igital Controls

HYBRID ANALOG/DIGITAL MIXER

GLOBAL

SETUPANTI-FEED OVERVIEW ANALYZER SELECTTAP

RESET

: REV HALLP01 -02 : REV ROOMP03-04 : REV VOCALP05-06

: REV STAGEP07-08 : REV PLATEP09- 10 : REV SPRINGP 1 1 - 1 2

: DELAYP13-16 : MOD FXP17-20 : TEST SOUNDP21-24

MULTIBAND DIGITAL PARAGRAPHIC EQ

DYNAMICS

FEEDBACK

EQUALIZER

DFXINFO VIEW

AUX 2

MAIN L/R

AUX 2

AUX 1

MENU EXIT

SELON

MAIN L/R

AUX 1

HYBRID ANALOG/DIGITAL MIXER

GLOBAL

SETUPANTI-FEED OVERVIEW ANALYZER SELECTTAP

RESET

: REV HALLP01 -02 : REV ROOMP03-04 : REV VOCALP05-06

: REV STAGEP07-08 : REV PLATEP09- 10 : REV SPRINGP 1 1 - 1 2

: DELAYP13-16 : MOD FXP17-20 : TEST SOUNDP21-24

MULTIBAND DIGITAL PARAGRAPHIC EQ

DYNAMICS

FEEDBACK

EQUALIZER

DFXINFO VIEW

AUX 2

MAIN L/R

AUX 2

AUX 1

MENU EXIT

SELON

MAIN L/R

AUX 1

HYBRID ANALOG/DIGITAL MIXER

GLOBAL

SETUPANTI-FEED OVERVIEW ANALYZER SELECTTAP

RESET

: REV HALLP01 -02 : REV ROOMP03-04 : REV VOCALP05-06

: REV STAGEP07-08 : REV PLATEP09- 10 : REV SPRINGP 1 1 - 1 2

: DELAYP13-16 : MOD FXP17-20 : TEST SOUNDP21-24

MULTIBAND DIGITAL PARAGRAPHIC EQ

DYNAMICS

FEEDBACK

EQUALIZER

DFXINFO VIEW

AUX 2

MAIN L/R

AUX 2

AUX 1

MENU EXIT

SELON

MAIN L/R

AUX 1

OFF

To change a parameter, press one of the two but- tons under either Attack or Sens. One of the parame- ters will illuminate.

Rotate the encoder wheel to set the parameter value.

Press down on the encoder wheel to enter and confirm the parameter value.

Push the button under Edit. Now the Limiter's adjustable

parameters are revealed.

A limiter is basically a very fast compressor with a very short attack and a moderately short release. Attack controls how fast the limiter takes to react; Sens (sensitivity) determines how intense a signal it reacts to.

Digital Controls Dynamics

If you press the red INFOVIEW OVERVIEW button, the display will return to Status Overview and you will see that LIMiter on Aux 1 is now active.

How do you cancel a dynamic processor? Press the active (designated blinking) DYNAMICS button. The effect with stop, the

button will change to inter- mittant blinking and a great big OFF will appear.

Don't forget, you can have three different dynamic processors run- ning at the same time

Monitor mixes created with Aux 1 and Aux 2 can particularly benefit from compression and limit- ing..

Page 44

H ook-up/Back panel

A nalog Controls

D igital Controls

HYBRID ANALOG/DIGITAL MIXER

GLOBAL

SETUPANTI-FEED OVERVIEW ANALYZER SELECTTAP

RESET

: REV HALLP01 -02 : REV ROOMP03-04 : REV VOCALP05-06

: REV STAGEP07-08 : REV PLATEP09- 10 : REV SPRINGP 1 1 - 1 2

: DELAYP13-16 : MOD FXP17-20 : TEST SOUNDP21-24

MULTIBAND DIGITAL PARAGRAPHIC EQ

DYNAMICS

FEEDBACK

EQUALIZER

DFXINFO VIEW

AUX 2

MAIN L/R

AUX 2

AUX 1

EXIT

SELON

MAIN L/R

AUX 1

SAMPLE ONLY

HYBRID ANALOG/DIGITAL MIXER

GLOBAL

SETUPANTI-FEED OVERVIEW ANALYZER SELECTTAP

RESET

: REV HALLP01 -02 : REV ROOMP03-04 : REV VOCALP05-06

: REV STAGEP07-08 : REV PLATEP09- 10 : REV SPRINGP 1 1 - 1 2

: DELAYP13-16 : MOD FXP17-20 : TEST SOUNDP21-24

MULTIBAND DIGITAL PARAGRAPHIC EQ

DYNAMICS

FEEDBACK

EQUALIZER

DFXINFO VIEW

AUX 2

MAIN L/R

AUX 2

AUX 1

EXIT

SELON

MAIN L/R

AUX 1

SAMPLE

HYBRID ANALOG/DIGITAL MIXER

GLOBAL

SETUPANTI-FEED OVERVIEW ANALYZER SELECTTAP

RESET

: REV HALLP01 -02 : REV ROOMP03-04 : REV VOCALP05-06

: REV STAGEP07-08 : REV PLATEP09- 10 : REV SPRINGP 1 1 - 1 2

: DELAYP13-16 : MOD FXP17-20 : TEST SOUNDP21-24

MULTIBAND DIGITAL PARAGRAPHIC EQ

DYNAMICS

FEEDBACK

EQUALIZER

DFXINFO VIEW

AUX 2

MAIN L/R

AUX 2

AUX 1

EXIT

SELON

MAIN L/R

AUX 1

HYBRID ANALOG/DIGITAL MIXER

GLOBAL

SETUPANTI-FEED OVERVIEW ANALYZER SELECTTAP

RESET

: REV HALLP01 -02 : REV ROOMP03-04 : REV VOCALP05-06

: REV STAGEP07-08 : REV PLATEP09- 10 : REV SPRINGP 1 1 - 1 2

: DELAYP13-16 : MOD FXP17-20 : TEST SOUNDP21-24

MULTIBAND DIGITAL PARAGRAPHIC EQ

DYNAMICS

FEEDBACK

EQUALIZER

DFXINFO VIEW

AUX 2

MAIN L/R

AUX 2

AUX 1

EXIT

SELON

MAIN L/R

AUX 1

SAMPLE

Saving a Dynamics setting.

After you have made your adjustment to dynamics parameters, press the MENU button, which will light up green.

On-screen you will see Save User Type and Erase User Type options.

Use the button under Select to pick Save as User Type.

Scroll up or down with and , or the encoder knob, pick an Empty loca- tion and press Select.

Digital Controls Dynamics

Press Save and you have now captured a Dynamics preset.

Note that you can also save a dynamics setting in the GLOBAL menu's "Save Scene" and "Memorize Mode."

Recalling a Dynamics preset. To recall saved dynamics set- tings, select the number of the save-destination in Step 3 at left.

Page 45

H ook-up/Back panel

A nalog Controls

D igital Controls

20 50 100 200 500 1k 2k 5k 10k 20k

20 50 100 200 500 1k 2k 5k 10k 20k 20 50 100 200 500 1k 2k 5k 10k 20k

Bass VOCALS Soprano

KEYBOARD

KICK DRUM

BASS GUITAR

FLOOR TOM

GUITAR

SNARE / GUITAR / PERCUSSION ATTACK

SNARE / GUITAR /ACOUSTIC INSTRUMENT CLARITY

CYMBALS/STRING INSTRUMENTS / SNARE SIZZLE

HI-HAT / CYMBALS

20 50 100 200 500 1k 2k 5k 10k 20k

WEIGHT WARMTH KNOCK BITE CLARITY AIR & SPARKLE

Digital Equalization

Digital Controls Graphic EQ

Main L/R, Aux 1 and Aux 2 can have your choice of two different types of digital equalization.

9-band Graphic Wide. The bandwidth approximately two octaves.

31 / 9-band Graphic Narrow. This unique SoundLink feature lets you choose nine 1/3-oc- tave bands.

Wide 9-band equalization is good for general shaping of PA or monitors.

31-band of equalization allows removing precise, narrow frequency bands.

From a practical standpoint, most problems can be solved with just nine precise, narrow frequency bands. You can use the Spectrum Analyzer to locate them.

Page 46

H ook-up/Back panel

A nalog Controls

D igital Controls

HYBRID ANALOG/DIGITAL MIXER

GLOBAL

SETUPANTI-FEED OVERVIEW ANALYZER SELECTTAP

RESET

: REV HALLP01 -02 : REV ROOMP03-04 : REV VOCALP05-06

: REV STAGEP07-08 : REV PLATEP09- 10 : REV SPRINGP 1 1 - 1 2

: DELAYP13-16 : MOD FXP17-20 : TEST SOUNDP21-24

MULTIBAND DIGITAL PARAGRAPHIC EQ

DYNAMICS

FEEDBACK

EQUALIZER

DFXINFO VIEW

AUX 2

AUX 1

EXIT

SELON

MAIN L/R

AUX 1

MAIN L/R

HYBRID ANALOG/DIGITAL MIXER

GLOBAL

SETUPANTI-FEED OVERVIEW ANALYZER SELECTTAP

RESET

: REV HALLP01 -02 : REV ROOMP03-04 : REV VOCALP05-06

: REV STAGEP07-08 : REV PLATEP09- 10 : REV SPRINGP 1 1 - 1 2

: DELAYP13-16 : MOD FXP17-20 : TEST SOUNDP21-24

MULTIBAND DIGITAL PARAGRAPHIC EQ

DYNAMICS

FEEDBACK

EQUALIZER

DFXINFO VIEW

AUX 2

AUX 1

EXIT

SELON

MAIN L/R

AUX 1

MAIN L/R

Selecting Narrow or Wide 9-band equalization.

The 9-band equalization mode has two different bandwidths (wide forvoicing and tonality and narrow for poblem solving), which increases its usefulness in contouring monitor feeds and your main PA.

You can use the Equaliza- tion section in Narrow or Wide modes, but not both at the same time. In other words, you can not use one band of the EQ as Wide band and another as Nar- row simultaneously.

If necessary, re-orient yourself by returning to the Status Over- view Screen. Select one of the EQ desti-

nations: Main L/R, Aux 1 or Aux 2. The 9-band equalizer dis- play will appear.

Press the MENU button. The display will show your options.

Choose Select EQ Mode by pressing the button below Select, or by pressing down the encoder knob.

The Wide / Narrow options appear. Use and to move between them, or turn the encoder knob. After you have made your choice, press the button under Select, or push the encoder knob down.

After selecting Wide or Narrow options, the screen will revert to EQ Menu. Press Exit to end the opera- tion.

Digital Controls Graphic EQ

Page 47

H ook-up/Back panel

A nalog Controls

D igital Controls

HYBRID ANALOG/DIGITAL MIXER

GLOBAL

SETUPANTI-FEED OVERVIEW ANALYZER SELECTTAP

RESET

: REV HALLP01 -02 : REV ROOMP03-04 : REV VOCALP05-06

: REV STAGEP07-08 : REV PLATEP09- 10 : REV SPRINGP 1 1 - 1 2

: DELAYP13-16 : MOD FXP17-20 : TEST SOUNDP21-24

MULTIBAND DIGITAL PARAGRAPHIC EQ

DYNAMICS

FEEDBACK

EQUALIZER

DFXINFO VIEW

AUX 2

AUX 1

EXIT

SELON

MAIN L/R

AUX 1

MAIN L/R

HYBRID ANALOG/DIGITAL MIXER

GLOBAL

SETUPANTI-FEED OVERVIEW ANALYZER SELECTTAP

RESET

: REV HALLP01 -02 : REV ROOMP03-04 : REV VOCALP05-06

: REV STAGEP07-08 : REV PLATEP09- 10 : REV SPRINGP 1 1 - 1 2

: DELAYP13-16 : MOD FXP17-20 : TEST SOUNDP21-24

MULTIBAND DIGITAL PARAGRAPHIC EQ

DYNAMICS

FEEDBACK

EQUALIZER

DFXINFO VIEW

AUX 2

AUX 1

EXIT

SELON

MAIN L/R

AUX 1

MAIN L/R

HYBRID ANALOG/DIGITAL MIXER

GLOBAL

SETUPANTI-FEED OVERVIEW ANALYZER SELECTTAP

RESET

: REV HALLP01 -02 : REV ROOMP03-04 : REV VOCALP05-06

: REV STAGEP07-08 : REV PLATEP09- 10 : REV SPRINGP 1 1 - 1 2

: DELAYP13-16 : MOD FXP17-20 : TEST SOUNDP21-24

MULTIBAND DIGITAL PARAGRAPHIC EQ

DYNAMICS

FEEDBACK

EQUALIZER

DFXINFO VIEW

AUX 2

AUX 1

EXIT

SELON

MAIN L/R

AUX 1

MAIN L/R

HYBRID ANALOG/DIGITAL MIXER

GLOBAL

SETUPANTI-FEED OVERVIEW ANALYZER SELECTTAP

RESET

: REV HALLP01 -02 : REV ROOMP03-04 : REV VOCALP05-06

: REV STAGEP07-08 : REV PLATEP09- 10 : REV SPRINGP 1 1 - 1 2

: DELAYP13-16 : MOD FXP17-20 : TEST SOUNDP21-24

MULTIBAND DIGITAL PARAGRAPHIC EQ

DYNAMICS

FEEDBACK

EQUALIZER

DFXINFO VIEW

AUX 2

AUX 1

EXIT

SELON

MAIN L/R

AUX 1

MAIN L/R

Adjusting 9-band EQ (Wide Mode).

Select one of the EQ desti- nations: Main L/R, Aux 1 or Aux 2.

The 9-band equalizer dis- play will appear.

Press one of the 9 buttons to select a frequency. The corresponding frequency band will change color from blue to white.

Rotate the encoder knob to boost or cut the frequency band. If you wish to reset the band, pres the RESET button.

Select another band to edit if desired OR select another EQ destina- tion (Aux 1 or Aux 2) to EQ OR exit by pressing EXIT.

Digital Controls Graphic EQ

Page 48

H ook-up/Back panel

A nalog Controls

D igital Controls

HYBRID ANALOG/DIGITAL MIXER

GLOBAL

SETUPANTI-FEED OVERVIEW ANALYZER SELECTTAP

RESET

: REV HALLP01 -02 : REV ROOMP03-04 : REV VOCALP05-06

: REV STAGEP07-08 : REV PLATEP09- 10 : REV SPRINGP 1 1 - 1 2

: DELAYP13-16 : MOD FXP17-20 : TEST SOUNDP21-24

MULTIBAND DIGITAL PARAGRAPHIC EQ

DYNAMICS

FEEDBACK

EQUALIZER

DFXINFO VIEW

AUX 2

AUX 1

EXIT

SELON

MAIN L/R

AUX 1

MAIN L/R

HYBRID ANALOG/DIGITAL MIXER

GLOBAL

SETUPANTI-FEED OVERVIEW ANALYZER SELECTTAP

RESET

: REV HALLP01 -02 : REV ROOMP03-04 : REV VOCALP05-06

: REV STAGEP07-08 : REV PLATEP09- 10 : REV SPRINGP 1 1 - 1 2

: DELAYP13-16 : MOD FXP17-20 : TEST SOUNDP21-24

MULTIBAND DIGITAL PARAGRAPHIC EQ

DYNAMICS

FEEDBACK

EQUALIZER

DFXINFO VIEW

AUX 2

AUX 1

EXIT

SELON

MAIN L/R

AUX 1

MAIN L/R

HYBRID ANALOG/DIGITAL MIXER

GLOBAL

SETUPANTI-FEED OVERVIEW ANALYZER SELECTTAP

RESET

: REV HALLP01 -02 : REV ROOMP03-04 : REV VOCALP05-06

: REV STAGEP07-08 : REV PLATEP09- 10 : REV SPRINGP 1 1 - 1 2

: DELAYP13-16 : MOD FXP17-20 : TEST SOUNDP21-24

MULTIBAND DIGITAL PARAGRAPHIC EQ

DYNAMICS

FEEDBACK

EQUALIZER

DFXINFO VIEW

AUX 2

AUX 1

EXIT

SELON

MAIN L/R

AUX 1

MAIN L/R

Adjusting EQ Narrow Mode EQ (31 /9-band).

Follow the steps for select- ing Narrow or Wide band EQ. Make sure that Narrow has been highlighted.

Press Select to choose Narrow. That will return you to this screen:

Press Exit.

That will return you to the screen shown below: The 9-band equal- izer display appears, except that in the upper right hand corner it now reads Narrow.

Each of the 9 bands now rep- resents a "gateway" to a narrower set of frequency bands.

Press a selection button to pick a "gateway".

Push down on the encoder knob to change the screen to 31 / 9 (Narrow) EQ mode.

Twist the encoder knob to select a 1/3-octave frequen- cy band within the selected "gateway" frequency range (80Hz to 200Hz in our example).

Digital Controls Graphic EQ

Page 49

H ook-up/Back panel

A nalog Controls

D igital Controls

HYBRID ANALOG/DIGITAL MIXER

GLOBAL

SETUPANTI-FEED OVERVIEW ANALYZER SELECTTAP

RESET

: REV HALLP01 -02 : REV ROOMP03-04 : REV VOCALP05-06

: REV STAGEP07-08 : REV PLATEP09- 10 : REV SPRINGP 1 1 - 1 2

: DELAYP13-16 : MOD FXP17-20 : TEST SOUNDP21-24

MULTIBAND DIGITAL PARAGRAPHIC EQ

DYNAMICS

FEEDBACK

EQUALIZER

DFXINFO VIEW

AUX 2

AUX 1

EXIT

SELON

MAIN L/R

AUX 1

MAIN L/R

HYBRID ANALOG/DIGITAL MIXER

GLOBAL

SETUPANTI-FEED OVERVIEW ANALYZER SELECTTAP

RESET

: REV HALLP01 -02 : REV ROOMP03-04 : REV VOCALP05-06

: REV STAGEP07-08 : REV PLATEP09- 10 : REV SPRINGP 1 1 - 1 2

: DELAYP13-16 : MOD FXP17-20 : TEST SOUNDP21-24

MULTIBAND DIGITAL PARAGRAPHIC EQ

DYNAMICS

FEEDBACK

EQUALIZER

DFXINFO VIEW

AUX 2

AUX 1

EXIT

SELON

MAIN L/R

AUX 1

MAIN L/R

Adjusting (Narrow Mode) Continued

Push down on the encoder knob to select that 1/3-oc- tave frequency. The screen will "revert" to the 9-band display

Rotate the encoder knob to boost or cut the frequency.

Press down on the encoder knob to return to the 31 / 9 (Narrow) EQ mode and view the results of your adjustment.

Shows there the EQ is assigned (Main L/R, Aux 1 or Aux 2) Amount of boost or cut

Visual represen- tation of boost or cut and loca- tion on 31-band spectrum (in this case, none)

Band Number

out of a total

of 9

Band selected in 9-band GEQ view Band adjusted in 31 / 9-band Narrow mode

Digital Controls Graphic EQ

Shows there the EQ is assigned (Main L/R, Aux 1 or Aux 2) Amount of boost or cut

Visual represen- tation of boost or cut and loca- tion on 31-band spectrum

Band Number

out of a total

of 9

Band selected in 9-band GEQ view Band adjusted in 31 / 9-band Narrow mode

Shows there the EQ is assigned (Main L/R, Aux 1 or Aux 2) Amount of boost or cut

Visual represen- tation of boost or cut and loca- tion on 31-band spectrum

Band Number

out of a total

of 9

Band selected in 9-band GEQ view Band adjusted in 31 / 9-band Narrow mode

Page 50

H ook-up/Back panel

A nalog Controls

D igital Controls

HYBRID ANALOG/DIGITAL MIXER

GLOBAL

SETUPANTI-FEED OVERVIEW ANALYZER SELECTTAP

RESET

: REV HALLP01 -02 : REV ROOMP03-04 : REV VOCALP05-06

: REV STAGEP07-08 : REV PLATEP09- 10 : REV SPRINGP 1 1 - 1 2

: DELAYP13-16 : MOD FXP17-20 : TEST SOUNDP21-24

MULTIBAND DIGITAL PARAGRAPHIC EQ

DYNAMICS

FEEDBACK

EQUALIZER

DFXINFO VIEW

AUX 2

AUX 1

EXIT

SELON

MAIN L/R

AUX 1

MAIN L/R

HYBRID ANALOG/DIGITAL MIXER

GLOBAL

SETUPANTI-FEED OVERVIEW ANALYZER SELECTTAP

RESET

: REV HALLP01 -02 : REV ROOMP03-04 : REV VOCALP05-06

: REV STAGEP07-08 : REV PLATEP09- 10 : REV SPRINGP 1 1 - 1 2

: DELAYP13-16 : MOD FXP17-20 : TEST SOUNDP21-24

MULTIBAND DIGITAL PARAGRAPHIC EQ

DYNAMICS

FEEDBACK

EQUALIZER

DFXINFO VIEW

AUX 2

AUX 1

EXIT

SELON

MAIN L/R

AUX 1

MAIN L/R

Recalling an Equalizer Setting. If you've gone to the trouble of carefully adjusting all nine 1/3-octave EQ bands (Narrow) to improve room acoustics in a club or sanctuary, you definitely don't want to have to re-set them before every use. That also goes for Aux 1 or Aux 2 EQ settings being fed to floor wedges or in- ears recall instead of resetting! On the following page is how to recall equalizer settings that you saved.

Saving Equalizer settings. You can save and recall up to 6 EQ settings as User Types

Press the MENU button. The settings menu appears.

Turn the encoder knob to select "Save as User Set- ting", and then press down on the encoder.

You can also select and confirm menu items by using "," "," and the function button indicated as "Select.".

If nothing is saved in the number, the display indicates "Empty".

Press the function button indi- cated as "Save". The current content is saved in the specified number.

If you select a number that is already used

the new content is overwritten. Pick another Empty User Setting.

To return to the previous screen without saving, press the EXIT button or the function button indi- cated as "Exit".

Digital Controls Graphic EQ

Page 51

H ook-up/Back panel

A nalog Controls

D igital Controls

HYBRID ANALOG/DIGITAL MIXER

GLOBAL

SETUPANTI-FEED OVERVIEW ANALYZER SELECTTAP

RESET

: REV HALLP01 -02 : REV ROOMP03-04 : REV VOCALP05-06

: REV STAGEP07-08 : REV PLATEP09- 10 : REV SPRINGP 1 1 - 1 2

: DELAYP13-16 : MOD FXP17-20 : TEST SOUNDP21-24

MULTIBAND DIGITAL PARAGRAPHIC EQ

DYNAMICS

FEEDBACK

EQUALIZER

DFXINFO VIEW

AUX 21

MAIN L/R

AUX 2

AUX 1

MENU EXIT

SELON

MAIN L/R

AUX

SAMPLE ONLY

HYBRID ANALOG/DIGITAL MIXER

GLOBAL

SETUPANTI-FEED OVERVIEW ANALYZER SELECTTAP

RESET

: REV HALLP01 -02 : REV ROOMP03-04 : REV VOCALP05-06

: REV STAGEP07-08 : REV PLATEP09- 10 : REV SPRINGP 1 1 - 1 2

: DELAYP13-16 : MOD FXP17-20 : TEST SOUNDP21-24

MULTIBAND DIGITAL PARAGRAPHIC EQ

DYNAMICS

FEEDBACK

EQUALIZER

DFXINFO VIEW

AUX 2

AUX 1

EXIT

SELON

MAIN L/R

AUX 1

MAIN L/R

HYBRID ANALOG/DIGITAL MIXER

GLOBAL

SETUPANTI-FEED OVERVIEW ANALYZER SELECTTAP

RESET

: REV HALLP01 -02 : REV ROOMP03-04 : REV VOCALP05-06

: REV STAGEP07-08 : REV PLATEP09- 10 : REV SPRINGP 1 1 - 1 2

: DELAYP13-16 : MOD FXP17-20 : TEST SOUNDP21-24

MULTIBAND DIGITAL PARAGRAPHIC EQ

DYNAMICS

FEEDBACK

EQUALIZER

DFXINFO VIEW

AUX 21

MAIN L/R

AUX 2

AUX 1

MENU EXIT

SELON

MAIN L/R

AUX

Recalling an Equalizer Setting (continued)

In the EQUALIZER section, press the MAIN L/R but- ton, AUX1 button, or AUX2 button to select the bus for which you want to recall equalizer settings.

Press the MENU button. The Settings menu appears.

Turn the encoder knob to select "Load User Setting," and then press down on the kn0b.

You can also select and confirm menu items by using "," "," and the function button indicated as "Select".

Turn the encoder knob to select the save destination. Then press the the knob down.

To return to the previous screen without recalling equalizer settings, press the EXIT button or the function button indicated as "Exit."

Digital Controls Graphic EQ

Page 52

H ook-up/Back panel

A nalog Controls

D igital Controls

HYBRID ANALOG/DIGITAL MIXER

GLOBAL

SETUPANTI-FEED OVERVIEW ANALYZER SELECTTAP

RESET

: REV HALLP01 -02 : REV ROOMP03-04 : REV VOCALP05-06

: REV STAGEP07-08 : REV PLATEP09- 10 : REV SPRINGP 1 1 - 1 2

: DELAYP13-16 : MOD FXP17-20 : TEST SOUNDP21-24

MULTIBAND DIGITAL PARAGRAPHIC EQ

DYNAMICS

FEEDBACK

EQUALIZER

DFXINFO VIEW

AUX 21

MAIN L/R

AUX 2

AUX 1

MENU EXIT

SELON

MAIN L/R

AUX

The recalled equalizer settings are applied to the currently selected bus.

Feedback Suppressor: Seting routing o ptions.

The Feedback Suppressor is an automatic notch filter that self-analyzed for feedbac and then places a very narrow notch filter in the offending band to reduce feedback. parameter set- tings. It just works.

Some "feedback suppressors", create digital noise as they oper- ate, ruining the whole concept of natural feedback suppression, KORG has gone far beyond our competitors to create an actual feedback natural suppressor.

What you CAN control is what the Feedback Suppressor acts upon: Main L/R, AUX 1 or AUX 2 (or all three at once).

Applying the Feedback Sup- pressor on the Main L/R makes perfect sense to reduce unex- pected feedback from mic posi- tion, or not-so-exact initial level setting.

If you are using Aux 1 and Aux 2 for monitor feeds, we recom- mend that Feedback Suppression should be always left on. Focused into a floor wedge or in-ear sys- tem, intense feedback can con- tribute to deafness.

Depending on the acoustic environment, the response might be slower, or suppression might not be complete. In this case, you can use the NARROW BAND equalizer in conjunction with this to effectively suppress feedback .

In the FEEDBACK section, press the ANTI-FEED button. Each time you press the button, the feedback sup- pressor alternately turns "ON" (enabled) or "OFF" (disabled).

When you turn it "OFF" (disabled), the suppression filter is reset.

Digital Controls Feedback Suppressor

Page 53

H ook-up/Back panel

A nalog Controls

D igital Controls

HYBRID ANALOG/DIGITAL MIXER

GLOBAL

SETUPANTI-FEED OVERVIEW ANALYZER SELECTTAP

RESET

: REV HALLP01 -02 : REV ROOMP03-04 : REV VOCALP05-06

: REV STAGEP07-08 : REV PLATEP09- 10 : REV SPRINGP 1 1 - 1 2

: DELAYP13-16 : MOD FXP17-20 : TEST SOUNDP21-24

MULTIBAND DIGITAL PARAGRAPHIC EQ

DYNAMICS

FEEDBACK

EQUALIZER

DFXINFO VIEW

AUX 21

MAIN L/R

AUX 2

AUX 1

MENU EXIT

SELON

MAIN L/R

AUX

Press the function but- tons indicated as "MAIN," "AUX1," or "AUX2" to switch the setting between "USE" (use) and "OFF" (don't use).

You can't set all bus- es to "OFF." Use the ANTI-FEED button to turn the feedback sup- pressor "OFF" (disabled).

Press the function button indicated as "Freq.Lock" to switch the setting between "Locked" (locked) and "Un- locked" (not locked).

If the feedback suppres- sor is disabled, or if this unit's power is turned off, the setting automatically switches to "Unlocked."

Next, specify the bus that uses the feedback suppres- sor by pressing the FEED- BACK section's button. The feedback suppressor's setting screen appears.

Locking the state of the feedback suppressor Although the feedback suppres- sor is constantly monitoring the sound and dealing with new feedback, you can stop the monitoring operation and lock the state of the filter frequency settings.

If the locations of the micro- phones and instruments is fixed, so that new feedback is unlikely to occur, you can lock this after the rehearsal/soundcheck to prevent unintended changes in the sound.

Press the FEEDBACK sec- tion's SETUP button. The feedback suppressor's setting screen appears.

Digital Controls Feedback Suppressor

Page 54

H ook-up/Back panel

A nalog Controls

D igital Controls

HYBRID ANALOG/DIGITAL MIXER

GLOBAL

SETUPANTI-FEED OVERVIEW ANALYZER SELECTTAP

RESET

: REV HALLP01 -02 : REV ROOMP03-04 : REV VOCALP05-06

: REV STAGEP07-08 : REV PLATEP09- 10 : REV SPRINGP 1 1 - 1 2

: DELAYP13-16 : MOD FXP17-20 : TEST SOUNDP21-24

MULTIBAND DIGITAL PARAGRAPHIC EQ

DYNAMICS

FEEDBACK

EQUALIZER

DFXINFO VIEW

AUX 2

MAIN L/R

AUX 2

AUX 1

EXIT

SELON

MAIN L/R

AUX 1

SAMPLE ONLY

Global menu (scene memory, settings, initialization).

You've set up Mute Groups, added dynamics to Aux 1 and 2, fine-tuned the graphic equalizer, assigned the Feedback Suppres- sor and customized Hall Warm digital effects.

Do you really want to have to do all of these adjustments again for the next gig or service or pre- sentation? Nope.

That's where Global Scene Memory comes in handy. In the GLOBAL menu's "Save Scene" and "Memorize Mode," the following settings are saved.

MUTE enable/disable Each channel's MUTE FX MUTE MUTE GROUP BREAK MUTE GROUP content

DYNamics

Items in the GLOBAL menu

Load Scene Recalls settings that were saved in "Save Scene."

Save Scene Saves settings of the digital section (such as dynamics and equalizer) (maximum 10 types).

Erase Scene Erases settings that were saved in "Save Scene."

Memorize Mode Specifies whether the previous settings of the digital section (dynamics and equalizer, etc.) are maintained or reset when this unit is powered-on. Memorize: The previous settings are maintained. Reset: Resets the settings.. If the power is turned off immediately after this operation (approximately 10 seconds), the settings might not be saved.

LCD Contrast Adjusts the display contrast (brightness) in a range of 126.

Level Meter Mode Specifies the display speed of the level meter. Normal Slow: The meter moves slowly. Normal Fast: The meter moves quickly. Peak Slow: The meter shows peak hold, and moves slowly. Peak Fast: The meter shows peak hold, and moves quickly.

Analyzer Mode Specifies the display speed of the spectrum analyzer. Normal Slow: The meter moves slowly. Normal Fast: The meter moves quickly. Peak Slow: The meter shows peak hold, and moves slowly. Peak Fast: The meter shows peak hold, and moves quickly.

Reset to Default Resets the panel settings of the digital section to their default state. (The user memories and scene memories of each effect are not erased.)

Clear User Memory Clears all user memories and scene memories of each effect.

Factory Reset Returns this unit to its factory default condition. All memory is erased.

System Update Executes a system update for this unit. The update can be downloaded from the KORG website. For details on the update procedure, refer to the documents that are included with the update.

GEQ and DFX settings ON/OFF Type Parameters

FEEDBACK applicable bus(s) Current screen display

Saving a Global Scene

Press the GLOBAL button.

Digital Controls Global Menu

Page 55

H ook-up/Back panel

A nalog Controls

D igital Controls

HYBRID ANALOG/DIGITAL MIXER

GLOBAL

SETUPANTI-FEED OVERVIEW ANALYZER SELECTTAP

RESET

: REV HALLP01 -02 : REV ROOMP03-04 : REV VOCALP05-06

: REV STAGEP07-08 : REV PLATEP09- 10 : REV SPRINGP 1 1 - 1 2

: DELAYP13-16 : MOD FXP17-20 : TEST SOUNDP21-24

MULTIBAND DIGITAL PARAGRAPHIC EQ

DYNAMICS

FEEDBACK

EQUALIZER

DFXINFO VIEW

AUX 2

MAIN L/R

AUX 2

AUX 1

EXIT

SELON

MAIN L/R

AUX 1

SAMPLE ONLY

HYBRID ANALOG/DIGITAL MIXER

GLOBAL

SETUPANTI-FEED OVERVIEW ANALYZER SELECTTAP

RESET

: REV HALLP01 -02 : REV ROOMP03-04 : REV VOCALP05-06

: REV STAGEP07-08 : REV PLATEP09- 10 : REV SPRINGP 1 1 - 1 2

: DELAYP13-16 : MOD FXP17-20 : TEST SOUNDP21-24

MULTIBAND DIGITAL PARAGRAPHIC EQ

DYNAMICS

FEEDBACK

EQUALIZER

DFXINFO VIEW

AUX 2

MAIN L/R

AUX 2

AUX 1

EXIT

SELON

MAIN L/R

AUX 1

SAMPLE ONLY

A scrolling menu of GLOBAL options will appear.

Select "Save Scene" by scrolling with E and G or the encoder knob.

Press then Select.

You will be presented with a choice of User "slots".

Select an un-used slot

Save your GLOBAL Scene.

Recalling a Global Scene

Press the GLOBAL button.

Select "Load Scene" by scrolling with E and G or the encoder knob.

Press then Select.

Scroll through your saved scenes with E and G or the encoder knob. Select an existing User Scene.

Other GLOBAL options. While you'll probably use "Save Scene", "Load Scene" and "Erase Scene" the most, the scrolling GLOBAL menu gives you access to many other options.

Memorize Mode specifies whether the previous settings of the digital section (dynamics and equalizer, etc.) are maintained or reset when this unit is pow- ered-on. Memorize: The previous set- tings are maintained. Reset: Resets the settings.

Digital Controls Global Menu

Page 56

H ook-up/Back panel

A nalog Controls

D igital Controls

LCD Contrast is more useful than you might think espe- cially if you do gigs in daylight hoursor VERY dark clubs.

Level Meter Mode determines how the main LED ladder dis- plays signals.

Normal shows all of the LEDs from -15 to the maximum signal. This is the convention- al display mode.

Slow and Fast are how quickly the display re- acts to musical peaks.

Peak just shows the highest level at any moment. This can be handy when you have a lot of other things to look at.

It concentrates the display where it is most important

the highest musical impulses and how close they are to overload.

Analyzer Mode. Although "nei- ther fish nor fowl", the the An- alyzer is definitely a key part of the SoundLink digital section. It gives you a visual display of how much energy there is in each of 24 bands of the audio spectrum.

Normally, it monitors Main L/R output, which can give you a pic- ture of your outgoing signal to the PA. Connect a measurement microphone and the display can show you how the room is "reacting" to the PA. Feedback can be fixed. Bass response can be made less boomy.

Slow and Fast Normal and Slow and Fast Peak definitely be- have differently. The Spectrum Analyzer in Fast mode reacts so quickly that it might not be

useful in locating "bumps" and "dips" in the overall response. If that is the case, switch to Slow.

Now we're in the "Danger! Danger! Warning! Warning!" thermo-nuclear section. Use these options carefully.

Clear User Memory clears all user memories and scene memo- ries of each effect. Reset to Default resets the pan- el settings of the digital section to their default state.

The user memories and scene memories of each effect are not erased.

Factory Reset returns this unit to its factory default condition. All memory is erased. It's like a Neuralizer in Men in Black. System Update executes a sys- tem update for this unit. The update can be downloaded

Digital Controls Other Global Options

Page 57

H ook-up/Back panel

A nalog Controls

D igital Controls

from the KORG website. For details on the update procedure, refer to the documents that are included with the update.

More on Factory Reset (restoring the factory default settings). You can also return this unit to its factory-set condition by turning the POWER switch on (ON) while holding down the farthest-left function button and the EXIT button simultaneously.

Notes

0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

Digital Controls Other Global Options

Page 58

H ook-up/Back panel

A nalog Controls

D igital Controls

Trouble Shooting

If this unit stops operating normally, check the following items. If taking the directed action does not correct the problem, or if there is a problem not listed here, disconnect the power cord from the elec- trical outlet and contact KORG customer service.

Problem Cause Action

The power wont turn on.

This unit is connected to a generator or to a switched power strip, and the power source is switched off.

Turn on the power of the generator or the switched power strip.

No sound is output. External equipment (instrument, micro- phone, etc.) is not connected correctly.

Check the connections to the external equipment.

The cable used for connection to external equipment (instrument, microphone, etc.) is shorted or broken.

Check the connections to the external equipment. Replace the cable as necessary.

Gain or faders are not adjusted appropri- ately.

Use the appropriate channel's GAIN knob and channel fader, the SUB GROUP MASTER faders, or the MAIN MIX (L/R) fader to adjust the levels.

Output is disabled for the corresponding channel.

Check the state of the corresponding channel's MUTE button and bus assign switches, the MUTE GROUP buttons, and the BREAK button.

No sound from the AUX OUT output jacks.

The signal levels of the AUX 14 buses are not adjusted appropriately.

Use the corresponding channel's AUX (14) SEND knobs to adjust the signal level.

No sound from the PHONES jack and MONITOR OUT jack.

The AFL function of the corresponding bus is disabled.

Use the AFL switch of the corresponding bus to enable the AFL function.

The PFL function of an unused channel is enabled.

Use the PFL switch of the corresponding channel to disable the PFL function.

The sound is ex- tremely quiet, or is distorted or noisy.

Gain or faders are not adjusted appropri- ately.

Use the appropriate channel's GAIN knob and channel fader, the SUB GROUP MASTER faders, or the MAIN MIX (L/R) fader to adjust the levels.

The output level of an external device connected to this unit is not appropriate.

Adjust the output level of the external device.

The compressor or effect is applied excessively.

Use the corresponding channel's COMP knob or FX SEND knob to adjust each effect.

An external device is connected to both the XLR jack and phone jack of the same channel.

Do not connect an external device to both jacks. Use only one of the jacks.

A condenser mic is being used with phan- tom power turned off.

Turn the 48V MIC PHANTOM switch on.

The sound is un- steady.

The compressor is applied excessively. Use the corresponding channel's COMP knob to adjust the compression effect.

There is volume in- consistency between the left and right of the stereo audio.

Volume balance (left/right) is not adjusted appropriately.

Use the corresponding channel's PAN knob to adjust the volume balance.

Different cables are being used for the left and right connections with the external device.

Use the same cables for left and right when connecting an external device.

Level meter does not work.

The PFL function of an unused channel is enabled.

Use the PFL switch of the corresponding channel to disable the PFL function.

Sound from an iPhone/iPad is not output.

The iPhone/iPad is insufficiently charged. Charge the iPhone/iPad and then try again.

The iPhone/iPad connected to the USB port is not supported by this unit.

Use an iPhone/iPad that is supported by this unit (page ).

Page 59

H ook-up/Back panel

A nalog Controls

D igital Controls

DYN (dynamics) Type Details Parameter / effect

P01: Limiter Limits excessive input. Attack: Time until compression begins Sens: Sensitivity of operation

P02: Comp Hard P03: Comp Soft

Limits high levels to make the sound more consis- tent and improve the loudness. "Comp Hard" applies the effect more strongly, and "Comp Soft" applies the effect more gently.

P04: NsGate Hard P05: NsGate Soft

Reduces noise by turning down the output when the input level is low. "NsGate Hard" applies the effect more strongly, and "NsGate Soft" applies the effect more gently.

Release: Time until the output is reduced Sens: Sensitivity (threshold that is consid- ered to be noise)

GEQ (graphic equalizer) Mode Contents

Wide (default) A basic wide-type graphic equalizer. Since each band is wide, nine bands cover the entire frequency range, making this suitable for adjusting the overall sound. The frequency of each band is fixed.

Narrow A high-class 1/3rd octave graphic equalizer. Since each band is narrow, this allows you to make detailed adjustments as appropriate for the acoustics of the live venue, or to increase the feedback margin. The frequency of each of the nine bands can be adjusted, and you can select the frequencies from the standard steps of a typical 31-band rack-mounted EQ.

DFX (digital effect) Type Details Parameter / effect

P01: Rev Hall P02: Rev Hall Warm

Provides the reverberation of a hall. "Rev Hall Warm" provides a warm tone.

Time: Time that the reverberation continues HiDamp: High frequency attenuation of the reverberant sound

P03: Rev Room P04: Rev Room Warm

Provides the reverberation of a small room. "Rev Room Warm" provides a warm tone.

P05: Rev Vocal P06: Rev Vocal Warm

Provides reverberation suitable for vocals. "Rev Vocal Warm" provides a warm tone.

P07: Rev Stage P08: Rev Stage Warm

Provides the reverberation of a mid-sized stage. "Rev Stage Warm" provides a warm tone.

P09: Rev Plate P10: Rev Plate Warm

Provides the reverberation of a plate reverb unit. "Rev Plate Warm" provides a warm tone.

P11: Rev Spring P12: Rev Spring Warm

Provides the distinctive reverberation of a spring reverb unit of the type often built into a guitar amp. "Rev Spring Warm" provides a warm tone.

Time: Time that the reverberation continues Sway: Amount of modulation for the springs

P13: Delay Analog Adds a delayed sound. This models a warm- toned analog delay.

Time: Delay time Feedback: Amount of repeated delay sounds

P14: Tape Echo Adds a delayed sound. This models a tape echo that balances warmth and clarity.

P15: Delay Standard Adds a delayed sound.

P16: Delay SDD3000 Adds a delayed sound. This produces a clear delay sound modeled on the Korg SDD3000 digital delay.

Digital Effects

Page 60

H ook-up/Back panel

A nalog Controls

D igital Controls

Type Details Parameter / effect

P17: Chorus Adds pitch-modulated sound to the original sound, creating greater depth. A slow "Speed" creates a unison (duet) effect, and a fast "Speed" creates a vibrato effect.

Speed: Speed of modulation Depth: Depth of modulationP18: Flanger Produces a twisting effect reminiscent of a jet

airplane passing overhead.

P19: Exciter Created more brilliance by enhancing upper hardmonic content.

Tone: Frequency region to boost

P20: Sub Bass Strengthens low-frequency sounds such as a bass drum by creating sub-harmonic content.

Sens: Sensitivity at which the input is followed Decay: Strength of decay for the sub-bass sound

P21: Sine 1kHz This is a test tone (1 kHz sine wave). Level: Signal level To prevent sound from being pro- duced unintentionally, a default value of "-INF" (silence) is specified when you select this type.

P22: Sweep Slow This is a test tone (swept sine wave).

P23: Sweep Fast "Sweep Slow" changes slowly, and "Sweep Fast" changes faster.

P24: Noise This is a test tone (white/pink noise). Color: Type of noise Level: Signal level To prevent sound from being pro- duced unintentionally, a default value of "-INF" (silence) is specified when you select this type.

Section Memory number Type

DYN (DYNAMICS) U01U10 User type (common to MAIN, AUX1, and AUX2)

GEQ (Graphic EQ) U01U06 User settings (common to MAIN, AUX1, and AUX2)

DFX U01U30 User type

GLOBAL U01U10 Scene memory

Settings that can be saved In the GLOBAL menu's "Save Scene" and "Memorize Mode," the fol- lowing settings are saved. MUTE enable/disable: Each channel's MUTE, FX MUTE, MUTE GROUP, and

BREAK

MUTE GROUP program content

DYN, GEQ, and DFX settings: ON/OFF, type, parameters

FEEDBACK settings: Applicable bus

Current screen display

Digital Effects Memory Settings

Page 61

H ook-up/Back panel

A nalog Controls

D igital Controls

Block Diagram

Page 62

H ook-up/Back panel

A nalog Controls

D igital Controls

Specifications

Frequency response 20 Hz 20 kHz +0.5/-1.5 dB Nominal output, 1 kHz reference

Total harmonic distortion (THD + N)

MAIN OUT 0.004 % 1 kHz +24 dBu, GAIN=minimum

Noise (A-weighted)

Equivalent input noise

INPUT to MAIN OUT

-128 dBu MIC IN, GAIN=maximum

Residual noise MAIN OUT -94 dBu Master fader: minimum

SUB GROUP OUT -102 dBu

AUX OUT -93 dBu

Bus noise MAIN OUT -70 dBu Master fader: nominal Bus assign switches: off

SUB GROUP OUT -80 dBu

AUX OUT (12) -64 dBu Master knob: nominal AUX SEND knob: minimum

AUX OUT (34) -69 dBu

Analog input specifications

Impedance Input level Connector specifications

Input Applicable source

Nominal level

Maximum level

MIC IN (channel)

3k 50 600 -10 to -60 dBu

+12 to -38dBu Form: XLR-3-31 Signal: monaural (balanced)

LINE IN (channel)

30k 600 +10 -40 dBu

+32 to -18 dBu Form: 6.3 mm phone jack (TRS) Signal: monaural (balanced)

MIC IN (TALKBACK)

1.1k 50 600 -55 dBu -18 dBu Form: XLR-3-31 Signal: monaural (balanced)

STEREO IN 2k 600 - -3 dBV Form: 3.5 mm phone jack (TRS) Signal: stereo (unbalanced)

Crosstalk Between input and output (MAIN L/R)

-70 dBu 1 kHz, Bandpass Filter

Between adjacent input channel strips

-95 dBu 1 kHz, Bandpass Filter

Analog output specifications

Impedance Output level Connector specifications

Output Rated im- pedance

Nominal Maximum

MAIN OUT 75 600 +4 dBu +26 dBu Form: XLR-3-32, 6.3 mm phone jack (TRS) Signal: monaural (balanced)

SUB GROUP OUT 75 10k +4 dBu +22 dBu Form: 6.3 mm phone jack (TRS) Signal: monaural (impedance balanced)

MONITOR OUT 75 10k +4 dBu +22 dBu Form: 6.3 mm phone jack (TRS) Signal: monaural (impedance balanced)

PHONES OUT 110 32 - 100 mW @32

Form: 6.3 mm phone jack (TRS) Signal: stereo (unbalanced)

AUX OUT 75 600 +4 dBu +26 dBu Form: XLR-3-32 Signal: monaural (balanced)

MUSICIAN'S PHONES OUT

110 32 - 100 mW @32

Form: 6.3 mm phone jack (TRS) Signal: stereo (unbalanced)

Digital input/output specifications

Applicable stan- dards

Audio format Connector specifications

USB IN/OUT USB Audio Class 1.0 44.1/48 kHz, 16/24-bit, stereo

Form: USB Type-B Signal: USB 2.0

Page 63

H ook-up/Back panel

A nalog Controls

D igital Controls

Audio channels

Input Channels Monaural strips 8 (8 ch)

Stereo strips MW-2408: 8 (16 ch) MW-1608: 4 (8 ch)

Auxiliary inputs STEREO IN 1 (2 ch)

TALKBACK 1

Internal buses MAIN 2 ch

SUB GROUP 8 ch

AUX 4 ch

FX 1 ch

MONITOR 2 ch

Specifications

Output Line MAIN 2 ch

SUB GROUP 8 ch

AUX 4 ch

MONITOR 2 ch

Headphones MUSICIAN'S PHONES 2

PHONES 1

USB USB IN 1 (2 ch)

USB OUT 1 (2 ch)

Master functions, System functions

Signal monitor

Level meter 2-row x 12-point LE, peak hold function Levels: OL, 15, 12, 9, 6, 3, 0, -3, -6, -9, -12, -15

ANALYZER 24-band spectrum analyzer, peak hold function

Feedback suppressor Three high-speed feedback suppressors Bus selection function, operation lock function

Mute control MUTE GROUP Programmable mute groups Memories: 4 mute groups

BREAK Mutes all bus routes of the input section * Except for MONITOR (PFL) route

Scene memory Save and recall digital section and mute settings Memories: 10 user scenes

Power supply

Rated input voltage AC100 240 V, 50/60 Hz

Maximum power consumption 45 W

Phantom power supply +48 V

Recommended operating temperature range

0 C to 40C / 32F to 110F

Page 64

H ook-up/Back panel

A nalog Controls

D igital Controls

Included items and options

Included items Power cord, Quick Start Guide, iZotope RX Elements license card

Options Rack mount hardware

MW-001 (for MW-2408 only)

Foot switch PS-1 or PS-3 pedal switch

NOTE Specifications and appearance are subject to change without notice.

Rack mounting (MW-2408 only) To install this unit in a rack, you can use a dedicated mixer bracket made by KORG (sold separately only for use with the MW-2408) Install the unit in a standard EIA-specification 19-inch rack. A minimum of 12U (approximately 533 mm) of space is required for rack installation. To leave room for connecting cables to the back panel, we recommend that you allow 14U (approximately 623 mm) of space. Before you begin installation, consider cabling and ventilation, and make sure that there is sufficient space.

Two or more adults must work together when installing this unit in a rack.

Allow sufficient space (10 cm or more) around the unit to ensure ventilation and to prevent heat buildup inside the unit. If other equipment is also installed in the rack, leave 1U or more of space between this unit and other units.

Heat buildup might cause malfunction or fire.

Before installing this unit in a rack, disconnect all cables from the unit.

Cables left connected might cause the unit to tip over or nearby objects to fall, possibly causing electric shock or malfunction.

Specifications MW-2408 Rack Mounting

Physical

Dimensions * Excluding protrusions

MW-2408 W480 mm x H187 mm x D530 mm * Unit width excluding side panels is 440 mm

MW-1608 W396 mm x H187 mm x D530 mm * Unit width excluding side panels is 356 mm

Weight MW-2408 20.5 lbs / 9.3 kg

MW-1608 17.0 lbs / 8.0 kg

Page 65

H ook-up/Back panel

A nalog Controls

D igital Controls

Side panel (left)

Side panel (right)

Bracket (left)

Bracket (right)

Use a screwdriver to remove the screws (6 loca- tions) from the side of this unit, and detach the left and right side panels.

Using the screws included with the bracket, attach the left and right brackets to this unit.

Use only the screws includ- ed with the bracket, and fasten them firmly to this unit. If you use different screws, it might not be possible to tighten them securely, allowing the unit to fall and possible cause injury or damage.

Install the unit in the rack.

Rack

MW-2408 Rack Mounting

Published XX/20XX Printed in China

www.korg.com

20XX KORG INC.

4015-2 Yanokuchi, Inagi-City, Tokyo 206-0812 JAPAN

IMPORTANT NOTICE TO CONSUMERS This product has been manufactured according to strict specifications and voltage requirements that are applicable in the country in which it is intended that this product should be used. If you have purchased this product via the internet, through mail order, and/or via a telephone sale, you must verify that this product is intended to be used in the country in which you reside. WARNING: Use of this product in any country other than that for which it is intended could be dangerous and could invalidate the manufacturer's or distributor's warranty. Please also retain your receipt as proof of purchase otherwise your product may be disqualified from the manufacturer's or distributor's warranty.

REMARQUE IMPORTANTE POUR LES CLIENTS Ce produit a t fabriqu suivant des spcifications svres et des besoins en tension applicables dans le pays o ce produit doit tre utilis. Si vous avez achet ce produit via linternet, par vente par correspondance ou/et vente par tlphone, vous devez vrifier que ce produit est bien utilisable dans le pays o vous rsidez. ATTENTION: Lutilisation de ce produit dans un pays autre que celui pour lequel il a t conu peut tre dangereuse et annulera la garantie du fabricant ou du distributeur. Conservez bien votre rcpiss qui est la preuve de votre achat, faute de quoi votre produit ne risque de ne plus tre couvert par la garantie du fabricant ou du distributeur.

WICHTIGER HINWEIS FR KUNDEN Dieses Produkt wurde unter strenger Beachtung von Spezifikationen und Spannungsanforderungen hergestellt, die im Bestimmungsland gelten. Wenn Sie dieses Produkt ber das Internet, per Postversand und/oder mit telefonischer Bestellung gekauft haben, mssen Sie besttigen, dass dieses Produkt fr Ihr Wohngebiet ausgelegt ist. WARNUNG: Verwendung dieses Produkts in einem anderen Land als dem, fr das es bestimmt ist, verwendet wird, kann gefhrlich sein und die Garantie des Herstellers oder Importeurs hinfllig lassen werden. Bitte bewahren Sie diese Quittung als Kaufbeleg auf, da andernfalls das Produkt von der Garantie des Herstellers oder Importeurs ausgeschlossen werden kann.

NOTA IMPORTANTE PARA EL CONSUMIDOR Este producto ha sido fabricado de acuerdo a estrictas especificaciones y requerimientos de voltaje aplicables en el pas para el cual est destinado. Si ha comprado este producto por internet, a travs de correo, y/o venta telefnica, debe usted verificar que el uso de este producto est destinado al pas en el cual reside. AVISO: El uso de este producto en un pas distinto al cual est destinado podra resultar peligroso y podra invalidar la granta del fabricante o distribuidor. Por favor guarde su recibo como prueba de compra ya que de otro modo el producto puede verse privado de la garan

Manualsnet FAQs

If you want to find out how the MW-2408 KORG works, you can view and download the KORG MW-2408 User Manual on the Manualsnet website.

Yes, we have the User Manual for KORG MW-2408 as well as other KORG manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User Manual should include all the details that are needed to use a KORG MW-2408. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the KORG MW-2408 User Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This KORG MW-2408 User Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download KORG MW-2408 User Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print KORG MW-2408 User Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the KORG MW-2408 User Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.

KORG MW-2408 User Manual PDF

Summary of Content for KORG MW-2408 User Manual PDF

Related manuals for KORG MW-2408 User Manual

KORG Pa600QT User Manual

KORG HAVIAN 30 User Manual

KORG MW-1608 User Manual

KORG Pa4X MUSIKANT User Manual

KORG Pa4X User Manual

KORG Pa4X ORIENTAL User Manual

KORG Pa300 Brazilian Edition User Manual

KORG Pa300 Bulgarian Edition User Manual

Manualsnet FAQs

How does a KORG MW-2408 User Manual MW-2408 work step-by-step?

Where can I find the User Manual for a KORG MW-2408 ?

How do I print the KORG MW-2408 User Manual?

How do I navigate a KORG MW-2408 User Manual?

What information can I find in the KORG MW-2408 User Manual?

How do I download the KORG MW-2408 User Manual?

How do I print the KORG MW-2408 User Manual?