Contents

KORG Pa300 Serbia Edition Loading the OS PDF

1 of 18
1 of 18

Summary of Content for KORG Pa300 Serbia Edition Loading the OS PDF

Pa300

Loading the OS

Charger le systme

Laden des OS

Caricamento del sistema operativo

Cargar el sistema operativo

KORG Italy 2016. All rights reserved

Address KORG ITALY SpA Via Cagiata, 85 I-60027 Osimo (An) Italy

Web www.korg.com

4M

1

Pa300 Operating System Update

Introduction KORG may release updates to the instruments Operating System. Updates can include new features, improvements, bug fixes, new sounds and/or styles. The most up-to-date version can be downloaded from our web site (www.korg. com).

Note: By loading the new Operating System, you also load all the features added by the previous updates.

Note: Please do not turn the instrument off before the loading operation has been completed!

Localized Operating System In some Countries, a localized version of Pa300 is sold in- stead of the International version. If you own a localized Pa300, please only load the Operating System dedicated to your instrument. To see if you have a localized Pa300, please check the system version in the Media > Utility page. If you have a localized instrument, a three-character abbre- viation for your Country (CHN, IND, IRN...) will appear next to system version number.

Making a safety copy of your data Loading this file will not modify your User data, but we sug- gest you create a safety copy of your data before proceed- ing.

To save all User data, use the Media > Save All procedure.

In case there are custom Factory data in the internal memory, go to the Global > Mode Preferences > Media page and remove the protection to the Factory data you want to save; then use the Media > Save procedures to save single items or banks.

In case there are custom Factory Sounds in the internal memory, backup all your data by using the Full Resource Backup command in the Media > Utility page.

See the chapter dedicated to file management in the Users Manual for more information.

Loading the Operating System Here is how to load the Operating System of your instru- ment.

1. Unzip the Operating System file from the .zip archive, and copy the resulting .pkg file to an USB storage device.

2. If it is on, keep the POWER button pressed for about one second to turn the instrument off. Then keep the IN- TRO 1 button pressed, and press the POWER button to turn the instrument on again.

3. Keep the INTRO 1 button pressed, until the Touch Panel Calibration page appears: this will confirm that the system loading procedure has been started. Execute the display calibration by touching the red cross wherever it appears.

4. A message will appear, asking you to select a .pkg file. Connect the USB storage device where you copied the sys- tem file to the USB HOST port, then touch the OK button in the display to close the dialog box.

5. When a file selector appears, use the Device pop-up menu (in the lower left side of the display) to choose the device connected to the USB HOST port. Then touch the Operating System .pkg file to select it, and touch the Select button on the display to confirm loading.

Device pop-up menu File selector

6. A dialog will appear, asking you to choose whether to update or to cancel the operation. Touch the Update button to confirm updating the Operating System.

2

7. A progress bar appears, showing the loading status.

8. When the loading procedure is finished, the System Update Completed message appears, inviting you to re- start the instrument.

9. Turn the instrument off by keeping the POWER but- ton pressed for about one second, then turn it on again by shortly pressing the POWER button.

Loading the Musical Resources (Factory Restore) Loading the Operating System may also update the Musi- cal Resources (Sounds, Styles). This type of data is not actually updated until you execute a Factory Restore. The need for a Factory Restore is indicated in the documents accompanying the Operating System.

Warning: Executing a Factory Restore will delete all User data and all custom Factory data (if any). See the Making a safety copy of your data section above for instructions on how to make a safety copy of your data.

1. Press the MEDIA button, then touch the Utility tab to access the Utility page.

2. Select the Factory Restore option, then touch the Ex- ecute button.

3. The Restore dialog appears. Leave the All checkbox selected if you want to reset everything. If you prefer to preserve some type of data, deselect the All checkbox, then deselect the type of data to be preserved.

4. Touch OK to confirm. A message appears, asking you if you want to erase all the data in the internal memory. Touch Yes to confirm (or No to cancel). All the Factory data will be reloaded and updated, and all User data will be erased.

5. If you have saved your User and/or custom Factory data, reload them by using the Media > Load operations. See the chapter dedicated to the file management in the Users Manual for more information.

3

Pa300 Mise jour du systme dexploitation

Introduction KORG publie rgulirement de nouvelles versions du sys- tme dexploitation de linstrument. Celles-ci peuvent ajou- ter de nouvelles fonctions, apporter des amliorations, augmenter le nombre de sonorits et de styles et/ou r- soudre dventuels problmes. La version la plus rcente du logiciel est tlchargeable de notre site web (www.korg. com).

Remarque: Chaque nouvelle version du systme effectue automatiquement toutes les modifications des mises jour antrieures.

Remarque: Ne mettez jamais linstrument hors tension avant la fin du chargement des donnes!

Systme dexploitation localis Dans certains pays, une version localise du Pa300 est vendue la place de la version internationale. Si vous avez achet un Pa300 localis, faites bien attention ne char- ger que le systme dexploitation ddi votre instrument. Pour vrifier si vous utilisez un Pa300 localis, SVP vrifiez le numro de version dans le menu Media > Utility page. Si vous avez un instrument localis, une abrviation trois caractres pour votre pays (CHN, IND, IRN) apparaitra cot du numro de version du systme.

Archivage de vos donnes Bien que les donnes User ne soient pas crases lors du chargement de ce fichier, il vaut mieux les archiver avant de commencer.

Larchivage de toutes les donnes utilisateur peut tre ef- fectu avec la commande Media > Save All.

Si la mmoire interne contient aussi des ressources mu- sicales dusine modifis, passez la page Global > Mode Preferences > Media et dverrouillez tous les ressources musicales dusine que vous souhaitez archiver. Sauvegar- dez ensuite les banques ou les fichiers individuels avec Me- dia > Save.

Si la mmoire interne contient aussi des sons dusine mo- difis, archivez toutes vos donnes avec la commande Full Resource Backup de la page Media > Utility.

Voyez le chapitre concernant la gestion de donnes dans le mode demploi pour en savoir plus.

Charger le systme dexploitation Voici comment charger le nouveau systme dexploitation de linstrument.

1. Ouvrez le fichier Operating System de larchive .zip et copiez le fichier .pkg qui en rsulte sur un support de mmoire USB.

2. Si linstrument est sous tension, maintenez le bouton POWER enfonc une seconde environ pour passer en veille. Maintenez ensuite le bouton INTRO 1 enfonc pendant que vous appuyez sur POWER pour remettre linstrument sous tension.

3. Maintenez le bouton INTRO 1 enfonc jusqu ce que la page Touch Panel Calibration saffiche. Cest l la confir- mation que la procdure de chargement a t lance. Ef- fectuez le calibrage de lcran en touchant la croix rouge partout o elle apparat.

4. Un message vous demande de slectionner un fichier .pkg. Branchez le support de mmoire USB contenant le fi- chier systme la prise USB HOST puis touchez le bouton OK lcran pour fermer la fentre de dialogue.

5. Quand un slecteur de fichier apparat, utilisez le menu droulant Device (dans le coin infrieur gauche de lcran) pour slectionner le dispositif branch la prise USB HOST. Touchez ensuite le fichier Operating System. pkg pour le slectionner puis touchez le bouton Select lcran pour confirmer le chargement.

Menu droulant Device Slecteur de fichier

6. Une fentre de dialogue apparat et vous permet de lancer la mise jour ou dannuler lopration. Touchez le bouton Update pour confirmer la mise jour.

4

7. Une barre de progression indique o en est le charge- ment.

8. Lorsque les donnes sont charges, le message Sys- tem Update Completed est affich, vous invitant red- marrer linstrument.

9. Mettez linstrument en veille en maintenant le bouton POWER enfonc environ une seconde puis remettez lins- trument sous tension en actionnant nouveau mais bri- vement le bouton POWER.

Charger les ressources musicales (Factory Restore) Certaines versions du systme dexploitation ncessitent aussi la mise jour des ressources musicales (sons, styles, des phrases de Pad). Comme cela ne se fait pas automa- tiquement, vous devez rtablir les donnes dusine avec Factory Restore. Les documents accompagnant le fichier systme vous indiquent si cette opration est effective- ment ncessaire.

Avertissement: Lors du chargement des rglages dusine, toutes les donnes utilisateur et tous les fichiers dusine modifis (le cas chant) sont effacs. Commencez donc par archiver ces types de donnes (voyez Archivage de vos donnes plus haut).

1. Appuyez sur le bouton MEDIA et touchez longlet [Uti- lity] pour sauter la page Utility.

2. Slectionnez loption Factory Restore et touchez le bouton Execute.

3. La fentre Restore apparat. Gardez la case All coche si vous voulez tout rinitialiser. Si vous souhaitez conserver certains types de donnes, dslectionnez la case All puis dslectionnez les types de donnes conserver.

4. Appuyez sur OK pour confirmer votre choix. Un mes- sage vous demande si vous acceptez deffacer toutes les donnes de la mmoire interne. Touchez Yes pour confir- mer lopration ou No pour lannuler. Toutes les donnes dusine sont recharges et la partie User est complte- ment efface.

5. Si ncessaire, vous pouvez alors recharger vos don- nes User et les donnes dusine modifies, archives au pralable, en effectuant les oprations Media > Load. Voyez le chapitre concernant la gestion de donnes dans le mode demploi pour en savoir plus.

5

Pa300 Aktualisierung des Betriebssystems

Vorweg KORG verffentlicht ab und zu neue Betriebssystemversio- nen fr das Instrument. Diese fgen neue Funktionen, Ver- besserungen, neue Klangfarben und/oder Styles hinzu und/ oder beheben eventuelle Probleme. Die jeweils aktuelle Systemversion steht auf unserer Webpage zum Download bereit (www.korg.com).

Anmerkung: Jede neue Version des Betriebssystems fgt auch automatisch die nderungen vorangehender Updates hinzu.

Anmerkung: Schalten Sie das Instrument niemals aus, be- vor die neuen Systemdaten komplett geladen sind!

Lokalisiertes Betriebssystem In einigen Lndern wird eine lokalisierte Version des PA300 anstelle der internationalen Version verkauft. Wenn Sie eine lokalisierte Version des PA300 besitzen, laden Sie bit- te nur das Betriebssystem, welches fr Ihre Version vorge- sehen ist. Um zu sehen, ob Sie eine lokalisierte PA300 ha- ben, berprfen Sie bitte die Systemversion auf der Media> Utility-Seite. Ein lokalisiertes Instrument erkennen Sie an einem dreistelligen Krzel fr Ihr Land (CHN, IND, IRN), welches neben der Systemversionsnummer angezeigt wird.

Sicherheitskopie Ihrer Daten Beim Laden dieser Datei werden die User-Daten zwar nicht berschrieben, aber wir raten trotzdem, Ihre eigenen Einstellungen vorher zu archivieren.

Zum Archivieren der Anwenderdaten mssen Sie den Me- dia > Save All-Befehl verwenden.

Wenn der interne Speicher auch abgewandelte Werks-Sty- les und -PAD-Phrasen enthlt, mssen Sie auf der Seite Global > Mode Preferences > Media die Eintrge Facto- ry Styles und Factory Pads freischalten. Sichern Sie die betreffenden Speicher oder Bnke anschlieend einzeln im Media > Save-Modus.

Wenn der interne Factory-Bereich auerdem abgewan- delte Sounds enthlt, archivieren Sie mit Full Resource Backup im Media > Utility-Modus am besten gleich alle internen Daten.

Weitere Informationen hierzu finden Sie im Kapitel ber die Datenverwaltung in der Bedienungsanleitung.

Laden des Betriebssystems Zum Laden des neuen Betriebssystems verfahren Sie bitte folgendermaen.

1. Packen Sie die Operating System-Datei (.zip-Archiv) aus und kopieren Sie die betreffende .pkg-Datei zu einem USB-Datentrger.

2. Wenn das Instrument momentan eingeschaltet ist, mssen Sie den POWER-Taster 1 Sekunde gedrckt hal- ten, um den Bereitschaftsbetrieb zu whlen. Halten Sie den INTRO 1-Taster gedrckt, whrend Sie den POWER-Taster bettigen, um das Instrument wieder einzuschalten.

3. Halten Sie den INTRO 1-Taster so lange gedrckt, bis die Seite Touch Panel Calibration erscheint. Das ist die Besttigung, dass der Ladevorgang vorbereitet wird. Ka- librieren Sie das Display den Anweisungen entsprechend, indem Sie auf die angezeigten roten Kreuze drcken.

4. Nun erscheint die Aufforderung, die gewnschte .pk- g-Datei zu whlen. Schieben Sie den USB-Datentrger mit der vorbereiteten Systemdatei in den USB HOST-Port und drcken Sie den [OK]-Button im Display, um das Dialog- fenster zu schlieen.

5. Wenn jetzt ein Fenster fr die Dateianwahl erscheint, mssen Sie mit der Device-Liste (unten links im Display) den an den USB HOST-Port angeschlossenen Datentrger whlen. Drcken Sie anschlieend [Operating System.pkg] und den [Select]-Button im Display, um den Ladebefehl zu besttigen.

Device-Liste Dateianwahl

6. Es erscheint ein Dialogfenster, in dem Sie angeben knnen, ob Sie das System aktualisieren oder den Befehl abbrechen mchten. Drcken Sie den [Update]-Button, um die Aktualisierung zu starten.

6

7. Ein Balken zeigt an, wie weit der Ladevorgang gedie- hen ist.

8. Wenn alle Daten geladen sind, erscheinen die Meldung System Update Completed und die Aufforderung das Ins- trument neuzustarten.

9. Halten Sie den POWER-Taster gedrckt, um den Be- reitschaftsbetrieb des Instruments zu whlen. Schalten Sie es danach wieder ein, indem Sie den POWER-Taster kurz drcken.

Laden der Musik-Ressourcen (Factory Restore) Bei bestimmten Systemversionen mssen auch die Styles, Pad-Phrasen und Performance-Speicher aktualisiert wer- den. Da das nicht automatisch geschieht, muss man hierfr den Factory Restore-Befehl verwenden. In den Anmer- kungen zum Betriebssystem erfahren Sie, ob dieser Vor- gang wirklich notwendig ist.

Warnung: Beim Laden der Werksvorgaben werden alle User-Daten und alle eventuell abgewandelten Werksda- ten berschrieben. Archivieren Sie diese Datenbereiche also vorher (siehe Sicherheitskopie Ihrer Daten).

1. Drcken Sie den MEDIA-Taster und den [Utility]-Reiter, um zur Utility-Seite zu gehen.

2. Whlen Sie den Factory Restore-Befehl und drcken Sie [Execute].

3. Es erscheint das Restore-Dialogfenster. Markieren Sie das All-Kstchen, wenn Sie alle Parameter zurckstel- len mchten. Wenn Sie bestimmte Einstellungen behalten mchten, drfen Sie All nicht markieren. Auch Datenty- pen, die nicht berschrieben werden sollen, drfen nicht markiert sein.

4. Besttigen Sie, indem Sie [OK] drcken. Jetzt erscheint die Rckfrage, ob Sie alle intern gespeicherten Daten l- schen mchten: Drcken Sie den [Yes]-Button, um den Befehl zu besttigen (oder [No], wenn Sie es sich anders berlegt haben). Alle Werksdaten werden erneut geladen und der User-Bereich wird gelscht.

5. Bei Bedarf knnen Sie Ihre zuvor archivierten User- und abgewandelten Werksdaten jetzt mit Media > Load laden. Weitere Informationen hierzu finden Sie im Kapitel ber die Datenverwaltung in der Bedienungsanleitung.

7

Pa300 Aggiornamento del sistema operativo

Introduzione KORG potrebbe aggiornare il sistema operativo dello stru- mento. Gli aggiornamenti potrebbero contenere nuove fun- zioni, migliorie, correzione di bug, nuovi suoni e/o stili. La versione pi aggiornata pu sempre essere prelevata dal nostro sito web (www.korg.com).

Nota: Nel caricare un nuovo sistema operativo, si caricano sempre anche le funzioni aggiunte dalle versioni preceden- ti.

Nota: Non spegnete lo strumento durante il caricamento del sistema operativo!

Sistema operativo localizzato In alcuni Paesi, non venduto il modello internazionale, ma una versione localizzata di Pa300. Se possedete una Pa300 localizzata, vi preghiamo di caricare esclusivamente il siste- ma operativo dedicato al vostro strumento. Per verificare se possedete una Pa300 localizzata, verificate la versione del sistema nella pagina Media > Utility. Se il vostro stru- mento localizzato, dopo il numero di versione del sistema apparir una sigla di tre caratteri corrispondente al vostro Paese (CHN, IND, IRN...).

Creare una copia di sicurezza dei dati Il caricamento di questo file non modifica i dati User, ma vi consigliamo ugualmente di creare una copia di sicurezza prima di procedere.

Per salvare tutti i dati User, usate la procedura Media > Save All.

Se nella memoria interna ci sono risorse musicali di tipo Factory personalizzati, andate nella pagina Global > Mode Preferences > Media e disattivate la protezione di questi dati Factory; poi usare le procedure Media > Save per salva- re singoli elementi o banchi interi.

Se nella memoria interna ci sono Sound di tipo Factory personalizzati, fate una copia di sicurezza di tutti i dati con il comando Full Resource Backup nella pagina Media > Uti- lity.

Vedi il capitolo dedicato alla gestione dei file nel Manuale di istruzioni per maggiori informazioni.

Caricare il sistema operativo Ecco come caricare il sistema operativo nello strumento.

1. Estraete il file del sistema operativo dallarchivio .zip, poi copiate il file di sistema operativo .pkg risultante in un dispositivo di memorizzazione USB.

2. Se lo strumento acceso, mettetelo in standby tenen- do premuto il pulsante POWER per circa un secondo. Poi tenete premuto il pulsante INTRO 1 e premete il pulsante POWER per riaccenderlo.

3. Tenete premuto il pulsante INTRO 1, fino a quando non appare la pagina Touch Panel Calibration: la sua compar-

sa conferma che la procedura di caricamento del sistema operativo iniziata. Eseguite la calibrazione del display toccando la croce rossa nel punto esatto in cui appare, e confermate.

4. Appare un messaggio che chiede di selezionare un file .pkg. Collegate alla porta USB HOST il dispositivo di memo- rizzazione USB in cui avete copiato il file di sistema. Una volta collegato il dispositivo, toccate il pulsante OK per con- fermare.

5. Quando appare la finestra di selezione file, usate il menu a comparsa Device (in basso a sinistra nel display) per scegliere il dispositivo collegato alla porta USB HOST. Poi toccate il file .pkg del sistema operativo per selezionar- lo, e infine toccate il pulsante Select nel display per confer- mare il caricamento.

Menu Device Selettore file

6. Appare una finestra di dialogo, che chiede se si deside- ra continuare con laggiornamento o annullare loperazio- ne. Toccate il pulsante Update per confermare laggiorna- mento del sistema operativo.

8

7. Appare una barra di avanzamento che mostra lo stato delloperazione di caricamento.

8. Una volta completata la procedura di caricamento, ap- pare il messaggio System Update Completed!, che invita a riavviare lo strumento.

9. Mettete lo strumento in standby tenendo il pulsante POWER premuto per circa un secondo, poi riaccendetelo premendo brevemente il pulsante POWER.

Caricare le risorse musicali (Factory Restore) Il caricamento del sistema operativo potrebbe aggiornare anche le risorse musicali (Sound, Style, Pad). Questo tipo di dati non viene effettivamente aggiornato finch non si esegue un Factory Restore. La necessit di eseguire un Fac- tory Restore indicato nella documentazione che accom- pagna il sistema operativo.

Attenzione: Lesecuzione di un Factory Restore cancella tutti i dati User e tutti i dati Factory personalizzati (se pre- senti). Vedi pi sopra la sezione Creare una copia di sicu- rezza dei dati per istruzioni su come creare una copia di sicurezza di questo genere di dati.

1. Premete il pulsante MEDIA, poi toccate la linguetta Uti- lity per accedere alla pagina Utility.

2. Selezionate lopzione Factory Restore, poi toccate il pulsante Execute.

3. Appare la finestra di dialogo Restore. Se desiderate re- settare tutto, lasciate la casella di spunta All selezionata. Se invece preferite conservare alcuni tipi di dati, deselezionate la casella di spunta All, poi deselezionate i tipi di dati che desiderate conservare.

4. Toccate OK per confermare. Appare un messaggio, che chiede se si desidera cancellare tutti i dati dalla memoria interna. Toccate Yes per confermare (oppure No per annul- lare). Tutti i dati Factory verranno ricaricati e aggiornati, e tutti i dati User verranno cancellati.

5. Se avete salvato i vostri dati User e/o Factory perso- nalizzati, ricaricateli con le procedure Media > Load. Vedi il capitolo dedicato alla gestione dei file nel Manuale di istru- zioni per maggiori informazioni.

9

Pa300 Actualizacin del Sistema Operativo

Introduccin KORG podr lanzar actualizaciones de sistema operativo de el instrumento. Las actualizaciones pueden incluir nuevas caractersticas, mejoras, correcciones de errores, nuevos sonidos y estilos. Puede descargar la versin ms actuali- zada de nuestro sitio web (www.korg.com).

Nota: Cargando el nuevo sistema operativo, se cargan tam- bin todas las caractersticas agregadas por las actualiza- ciones anteriores.

Nota: Por favor no apague el instrumento antes de que se haya completado la operacin de carga!

Versiones locales de Sistemas Operativo En algunos pases se ofrece una versin local del Pa300 en lugar de la versin internacional diseada para todos los mercados. Si usted posee una versin local del Pa300, instale solamente el Sistema Operativo correspondiente a esta versin. Para comprobar si usted tiene un Pa300 local, puede consultar la versin de sistema en Media > Utility page. Si su versin es local, aparecer un cdigo de abre- viatura de pas (CHN, IND, IRN) acompaando al nmero de versin de Sistema Operativo.

Copia de seguridad de los datos Cargar este archivo no modificar los datos de usuario, pero sugerimos que haga una copia de seguridad de sus datos antes de continuar.

Para guardar todos los datos de usuario, use Media > Save All.

En caso de que haya datos de fbrica personalizados en la memoria interna, vaya a la pgina Global > Mode Preferen- ces > Media y quite la proteccin a los datos de fbrica que desea guardar; a continuacin, utilice los procedimientos Media > Save para guardar elementos o bancos.

En caso de que haya Sonidos personalizados en la memo- ria interna, realice una copia de seguridad usando el co- mando Full Resource Backup en la pgina Media > Utility.

Consulte el captulo dedicado a la gestin de archivos en el Manual de Usuario para ms informacin.

Cargar el Sistema Operativo Para cargar el Sistema Operativo en el instrumento.

1. Descomprima el archivo .zip para extraer el archivo del Sistema Operativo, y copie el archivo .pkg en un dispositivo de almacenamiento USB.

2. Si est encendido, pulse el botn POWER para apagar el instrumento. A continuacin, mantenga presionado el botn INTRO 1 y pulse el botn POWER para encender de nuevo el instrumento.

3. Mantenga presionado el botn INTRO 1, hasta que apa- rezca la pgina de calibracin de Panel tctil: Esto confirma que se ha iniciado el procedimiento de inicializacin. Eje-

cute la calibracin tocando la cruz roja en el lugar donde aparezca.

4. Aparece un mensaje pidindole seleccione el archivo .pkg. Conecte el dispositivo de almacenamiento USB donde copi el archivo de sistema al puerto USB HOST y, a con- tinuacin, toque el botn OK en la pantalla para cerrar el cuadro de dilogo.

5. Cuando aparezca el selector de archivos use el men de seleccin de dispositivo (en la parte inferior izquierda de la pantalla) para elegir el dispositivo conectado al puerto USB HOST. Ahora toque el archivo de sistema operativo .pkg para seleccionarlo y toque el botn Select en la pan- talla para confirmar la carga.

Men de dispositivo Selector de archivo

6. Aparece un cuadro de dilogo que le pide si actualizar o cancelar la operacin. Toque el botn Update para confir- mar la actualizacin del sistema operativo.

10

7. Aparece una barra de progreso, que muestra el estado de carga.

8. Al finalizar el procedimiento de carga, aparece el men- saje Update Completed!, invitando a que se reinicie el instrumento.

9. Apague el instrumento manteniendo pulsado el botn POWER durante un segundo, y despus vuelva a encender- lo pulsando brevemente el botn POWER.

Cargar los Recursos Musicales (Inicializacin de Fbrica) Al cargar el sistema operativo tambin se pueden actuali- zar los Recursos Musicales (Estilos, Pads, Sonidos). Este tipo de datos no se actualiza en realidad hasta que ejecuta una Inicializacin de fbrica. La necesidad de ejecutar una Inicializacin de fbrica se indica en las notas de la versin que acompaan al sistema operativo.

Advertencia: Al ejecutar una Inicializacin de fbrica se eliminarn todos los datos de usuario y todos los datos de fbrica personalizados (si existen). Consulte la seccin Copia de seguridad de los datos ms arriba para obtener instrucciones sobre cmo hacer una copia de seguridad de sus datos.

1. Pulse el botn MEDIA y, a continuacin, pulse en la pestaa de utilidad Utility para acceder a la pgina Utility.

2. Seleccione la opcin Factory Restore y, a continuacin, toque el botn Execute.

3. Aparece el cuadro de dilogo Restore. Deje la casilla de verificacin All seleccionada si desea restablecer todo. Si prefiere preservar algn tipo de datos, desactive la casilla de verificacin All, y luego deseleccione el tipo de datos que desea conservar.

4. Toque OK para confirmar. Aparece un mensaje pregun- tndole si desea borrar todos los datos en la memoria in- terna. Toque en Yes para confirmar (o No para cancelar). Se vuelven a cargar y actualizar todos los datos de fbrica, y se borrarn todos los datos de usuario.

5. Si ha guardado sus datos de usuario y/o personalizados de fbrica, crguelos mediante Media > Load. Consulte el captulo dedicado a la gestin de archivos en el Manual de Usuario para ms informacin.

11

Pa300

KORG bug / (www.korg.com)

PA300 PA300

PA300 (Media) > (Utility).

3 (CHN, IND, IRN...)

Media > Save All

Global > Mode Preferences > Media Media > Save

Media > Utility Full Resource Backup

1. .zip .pkg USB

2. INTRO 1

3. Touch Panel Calibration INTRO 1

4. .pkg USB USB HOST OK

5. USB HOST U .pkg Select

6. Update

7.

8. System Update Completed

9.

12

(Factory Restore)

(Factory Restore)

""

1. MEDIA Utility Utility

2. Factory Restore Execute

3. Restore All All

4. OK Yes No

5. / Media > Load

13

www.korg.com

Note:

Note: USB

Pa300 Pa300 Pa300 Media Utility 3 CHNIND IRN

Media Save All

Global Mode Preferences Media Media Save 1

Media Utility Full Resource Backup

1. .pkg USB

2. POWER 1 INTRO1 POWER INTRO1

3. Touch screen calibration INTRO1

4. .pkg USB USB HOST OK

5. USB HOST .pkg Select

14

6. Update

7.

8. SYSTEM UPDATE COMPLETED

9. POWER 1 POWER

Factory Restore

Warning:

1. Media Media Utility Utility

2. Factory Restore Execute

3. All All

4. OK Yes No

5. Media Load

Pa300

Loading the OS

Charger le systme

Laden des OS

Caricamento del sistema operativo

Cargar el sistema operativo

KO

Manualsnet FAQs

If you want to find out how the Pa300 KORG works, you can view and download the KORG Pa300 Serbia Edition Loading the OS on the Manualsnet website.

Yes, we have the Loading the OS for KORG Pa300 as well as other KORG manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Loading the OS should include all the details that are needed to use a KORG Pa300. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the KORG Pa300 Serbia Edition Loading the OS is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This KORG Pa300 Serbia Edition Loading the OS consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download KORG Pa300 Serbia Edition Loading the OS free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print KORG Pa300 Serbia Edition Loading the OS, simply download the document to your computer. Once downloaded, open the PDF file and print the KORG Pa300 Serbia Edition Loading the OS as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.