Contents

KORG AIB-8 Owner's Manual PDF

1 of 4
1 of 4

Summary of Content for KORG AIB-8 Owner's Manual PDF

KORG INC. 15-12, Shimotakaido 1-chome, Suginami-ku, Tokyo, Japan

Owners Manual

Warning When installing, servicing, or replacing parts for this product, do not perform any action that is not prescribed in the owner's manual. Do not apply excessive force to the electronic components or connectors on the circuit board, and do not disassemble it. Electrical shock, fire, or malfunction may result. Before installing this product, disconnect the power supply cable of the device in which it is being installed, and disconnect any cables that connect peripheral devices. Failure to do so may cause electrical shock or malfunctions.

Caution Do not allow this product to become wet, and do not place objects on top of it. Doing so will cause malfunctions. Before touching this product, touch a metal part of the device into which it will be installed, so that any static electricity in your body will be discharged. Failure to do so will risk damaging the electronic components by static electricity. When handling this product, be careful not to touch the leads (wires protruding from the electronic components) on the rear side of the circuit board. Injury may result. When installing this product, do not touch any unrelated parts or circuit boards. Electric shock or malfunction may result. When installing this product, be careful not to cut yourself on any sharp edges or parts of this product or of the device into which this product is being installed. When installing this product, be careful not to drop screws etc. into the device into which this product is being installed.

The manufacturer makes no warrantee regarding possible malfunctions or damage that may result from improper use or modification. The manufacturer also will take no responsibility for any damages that may result from loss or disappearance of data.

Installing this product For the procedure of installing this product, refer to the owner's manual of the device into which the product is being installed. If you have any questions, please contact your local Korg distributor.

Cautions when installing an option board In order to install the board correctly, please pay attention to the following points. Be careful of static electricity, which may damage components inside the product or on the board. Before beginning the installation, touch an unpainted metal part of the chassis or the grounding terminal of a grounded device to discharge any static electricity that may be present in your body. Perform the installation according to the steps given in the directions, making sure that the board is installed correctly and in the correct orientation. Verify that the option board has been installed correctly. If installation is incorrect, faulty connections or a shorted power supply can cause malfunctions. All the screws that are removed will be used, so be careful not to lose any. Using screws of the incorrect shape or length can cause malfunctions or damage to the product. Use only the screws that were included with the option board or the screws that were fastened in the instrument. When installing or removing the board, be careful not to drop parts or the option board into the instrument. Make sure that the attaching screws are tightened firmly, and are not loose. Handle the board with care. Subjecting it to physical shock (by dropping or pressing it) may cause damage or malfunctions. Be careful not to touch any exposed metal portions of the circuit board, or any parts that are not essential to the installation process.

THE FCC REGULATION WARNING (for U.S.A.) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

Unauthorized changes or modification to this system can void the users authority to operate this equipment.

CE mark for European Harmonized Standards CE mark which is attached to our companys products of AC mains operated apparatus until December 31, 1996 means it conforms to EMC Directive (89/ 336/EEC) and CE mark Directive (93/68/EEC).

And, CE mark which is attached after January 1, 1997 means it conforms to EMC Directive (89/336/EEC), CE mark Directive (93/68/EEC) and Low Voltage Directive (73/23/EEC).

Also, CE mark which is attached to our companys products of Battery operated apparatus means it conforms to EMC Directive (89/336/EEC) and CE mark Directive (93/68/EEC).

IMPORTANT NOTICE TO CONSUMERS This product has been manufactured according to strict specifications and voltage requirements that are applicable in the country in which it is intended that this product should be used. If you have purchased this product via the internet, through mail order, and/or via a telephone sale, you must verify that this product is intended to be used in the country in which you reside.

WARNING: Use of this product in any country other than that for which it is intended could be dangerous and could invalidate the manufacturer's or distributor's warranty.

Please also retain your receipt as proof of purchase otherwise your product may be disqualified from the manufacturer's or distributor's warranty.

2003 KORG INC. 1506 GH Printed in Japan

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may n ot cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Complies with Canadian ICES-003 Class B. Conforme au Reglement Canadian NMB-003 classe B.

AIB-8 Introduction Thank you for purchasing the Korg AIB-8 8-channel analog input board. In order to enjoy long and trouble-free use, please read this owner's manual carefully.

Features By installing the AIB-8 in the D32XD/D16XD you can add eight analog inputs.

INPUT 9...INPUT 16 jacks Connect mic or line sources (such as keyboards) to these input jacks. These are balanced inputs that allow you to use 1/4" TRS phone jacks. You may also connect unbalanced phone plugs.

GND COLD HOT GND HOT

Balanced phone plug Unbalanced phone plug

PAD keys These drop the input level by 26 dB. The pad is on when the switch is pressed in. You can extend the adjustable range of the TRIM knob by switching this on when using line inputs. Leave the pad switched off for low-output devices such as a mic or guitar.

TRIM Knobs These adjust the input level. The markings around the knob indicate the input level.

Installation and settings For details on installing and setting up the AIB-8, please refer to the owners manual of the device into which you are install- ing the AIB-8. If you have any questions, please contact your local Korg distributor.

ACB-8 Introduction Thank you for purchasing the Korg ACB-8 8-channel analog compressor board. In order to enjoy long and trouble-free use, please read this owner's manual carefully.

Features Analog compressors allow you to apply dynamics processing to adjust the level of the analog signal before it is converted into digital data, preventing clipping before A/D conversion. This also provides the distinctive character of analog compres- sion that cannot be duplicated by a digital compressor. The ACB-8 can also be installed on the 8-channel analog input board (AIB-8: optional). If the AIB-8 and ACB-8 are installed, you can use analog compressors on all sixteen channels of analog input.

Installation and settings For details on installing and setting up the ACB-8, please refer to the owners manual of the device into which you are install- ing the ACB-8. If you have any questions, please contact your local Korg distributor.

DIB-8 Introduction Thank you for purchasing the Korg AIB-8 ADAT I/O board . In order to enjoy long and trouble-free use, please read this owner's manual carefully.

Features This board provides eight channels of ADAT input/output and word clock input/output. ADAT input/output supports 48 kHz/44.1 kHz sampling frequencies and 24/16-bit depths.

1. ADAT inputs and outputs jack This jack inputs and outputs an ADAT format (ADAT Type I/II format) digital signal of the same sampling frequency and bit depth as the current song.

2. Word clock inputs and outputs jack This outputs the internal clock as a word clock signal. This inputs a word clock signal from an external device. To make connections, you will need to obtain an BNC coax cable manufactured by the Alesis corporation or a video BNC cable.

3. 75 switch This switches the 75 word clock terminator on/off. Turn the switch On if this is the end of the connection, or Off if the connection is branched.

Installation and settings For details on installing and setting up the DIB-8, please refer to the owners manual of the device into which you are install- ing the DIB-8. If you have any questions, please contact your local Korg distributor. *ADAT and Alesis are the trademarks or registered trademarks of Alesis Inc.

31 2

1.1

2.

3

3. This warranty is valid only in Japan.

4.

5.

1.

2.

TEL 03(3799)9086

: 143-00015-4-1 5

TEL 03(3799)9085 : 466-0825 100-51

TEL 052(832)1419 : 531-0072 3-2-157F

TEL 06(6374)0691 : 810-0012 1-3-2521F

TEL 092(531)0166

AIB-8/ACB-8/DIB-8

AIB-8 AIB-8 8

AIB-88

INPUT9...16 / 6.3mmTRS

GND

COLD HOT GND HOT

PAD 26 TRIM

TRIM LED

ACB-8 ACB-8 8

8(AIB-8:)ACB-8 16

DIB-8 DIB-8 ADAT I/O

DIB-88ADAT ADAT48kHz/44.1kHz24/16bit

1. ADAT ADATADAT Type/

2. AlesisBNC Coax CableBNC

Manualsnet FAQs

If you want to find out how the AIB-8 KORG works, you can view and download the KORG AIB-8 Owner's Manual on the Manualsnet website.

Yes, we have the Owner's Manual for KORG AIB-8 as well as other KORG manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Owner's Manual should include all the details that are needed to use a KORG AIB-8. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the KORG AIB-8 Owner's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This KORG AIB-8 Owner's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download KORG AIB-8 Owner's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print KORG AIB-8 Owner's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the KORG AIB-8 Owner's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.