Karcher U17X BDS 43 175 C 1.009-096.0 Operator's Manual PDF

1 of 19
1 of 19

Summary of Content for Karcher U17X BDS 43 175 C 1.009-096.0 Operator's Manual PDF

WARNING: This product and accessories may contain a chemical known to the State of California to cause cancer and birth defects or other reproductive harm

For more information about this regulation: www.P65Warnings.ca.gov

86386990-F 06/26/18

Polisher

Floor Machine

Operating Instructions (ENG)

MODELS:

U20X, BDS 51/175 C 1.009-095.0

U17X, BDS 43/175 C 1.009-096.0

UDS20X, BDS 51/175-300C

1.009-097.0

2

Warranty Registration Thank you for choosing our product. Warranty registration is quick and easy.

Your registration will allow us to serve you better over the lifetime of the product. To register your product go to:

http://warranty.karcherna.com

86386990 Operators Manual - Floor Polisher

Machine Data Label

3

Table of Contents

Machine Data Label . . . . . . . . . . . . . . . . . . . . . . . . 2

Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . 3

How To Use This Manual . . . . . . . . . . . . . . . . . . . 4

Safety Safety Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 IMPORTANT SAFETY INSTRUCTIONS . . . . . . . 6 CONSIGNES DE SCURIT IMPORTANTES . . 7 HAZARD INTENSITY LEVEL . . . . . . . . . . . . . . . . 8 NIVEAU D'INTENSIT DU DANGER. . . . . . . . . . 9 Grounding Instructions . . . . . . . . . . . . . . . . . . . . 10

Operations Technical Specifications . . . . . . . . . . . . . . . . . . . 12 Handle Installation . . . . . . . . . . . . . . . . . . . . . . . 13 Controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Machine Operation . . . . . . . . . . . . . . . . . . . . . . . 15

Maintenance Scrub Brushes . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Uncoated Floors . . . . . . . . . . . . . . . . . . . . . . . . . 16 Finished Floors . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Service Schedule . . . . . . . . . . . . . . . . . . . . . . . . 16 Machine Troubleshooting . . . . . . . . . . . . . . . . . . 17 Suggested Spare Parts. . . . . . . . . . . . . . . . . . . . 18

86386990 Operators Manual - Floor Polisher

4

How To Use This Manual

This manual contains the following sections:

How to Use This Manual

Safety

Operations

Maintenance

Suggested Spare Parts

The HOW TO USE THIS MANUAL section will tell you how to find important information for ordering correct repair parts.

Parts may be ordered from authorized dealers. When placing an order for parts, the machine model and machine serial number are important. Refer to the MACHINE DATA box which is filled out during the installation of your machine. The MACHINE DATA box is located on the inside of the front cover of this manual.

The model and serial number of your machine is located on the back of the machine.

The SAFETY section contains important information regarding hazardous or unsafe practices of the machine. Levels of hazards are identified that could result in product damage, personal injury, or severe injury resulting in death.

The OPERATIONS section is to familiarize the operator with the operation and function of the machine.

The MAINTENANCE section contains preventive maintenance to keep the machine and its compo- nents in good working condition. They are listed in this general order:

Maintenance

Troubleshooting

NOTE: If a service or option kit is installed on your machine, be sure to keep the KIT INSTRUCTIONS which came with the kit. It contains replacement parts numbers needed for ordering future parts.

NOTE: The manual part number is located on the lower right corner of the front cover.

Model:

Date of Purchase:

Serial Number:

Dealer:

Address:

Phone Number:

Sales Representative:

86386990 Operators Manual - Floor Polisher

5

Safety

Safety Labels NOTE: These drawings indicate the location of safety labels on the machine. If at any time the labels become illegible, promptly replace them.

Emplacement De L'tiquette De Scurit

REMARQUE: Ces dessins indiquent l'emplacement des tiquettes de scurit sur la machine. Si, tout moment, les tiquettes deviennent illisibles, contactez votre reprsentant autoris pour un remplacement rapide

WARNING LABEL 86378520

WARNING LABEL 86378920

86386990 Operators Manual - Floor Polisher

6

Safety

IMPORTANT SAFETY INSTRUCTIONS When using this machine, basic precaution

must always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE.

To reduce the risk of fire, electric shock, or injury:

Use only indoors. Do not use outdoors or expose to rain.

Use only as described in this manual. Use only manufacturers recommended components and attachments.

If the machine is not working properly, has been dropped, damaged, left outdoors, or dropped into water, return it to an authorized service center.

Do not operate the machine with any openings blocked. Keep openings free of debris that may reduce airflow.

Do not operate this machine near flammable fluids, dust or vapors.

Maintenance and repairs must be done by qualified personnel.

During operation, attention shall be paid to other persons, especially children.

The machine shall only be operated by instructed and authorized persons.

When leaving unattended, unplug the machine.

Do not handle the plug or machine with wet hands.

Do not unplug machine by pulling on cord. To unplug, grasp the plug, not the cord.

Do not use with damaged cord or plug. Follow all instructions in this manual concerning grounding the machine.

Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners.

Do not pull/run machine over cord. Keep cord away from heated surfaces.

Connect to a properly grounded outlet. See Grounding Instructions.

READ AND SAVE THESE INSTRUCTIONS

86386990 Operators Manual - Floor Polisher

7

Safety

CONSIGNES DE SCURIT IMPORTANTES Lors de l'utilisation de cette machine, des prcautions de base

doivent toujours tre prises, y compris les prcautions suivantes:

LIRE TOUTES LES INSTRUCTIONS AVANT D'UTILISER CETTE MACHINE. Pour rduire le risque d'incendie, d'lectrocution ou de blessure:

Utilisez-le exclusivement dans des endroits ferms. Ne l'utilisez pas en plein air et ne le laissez pas sous la pluie.

Utilisez-le exclusivement de la manire dcrite dans ce manuel. Utilisez exclusivement les composants et les fixations recommands par le fabricant.

Si l'appareil ne fonctionne pas correctement, s'il est tomb par terre, s'il est endommag, s'il a t laiss dehors ou s'il a t plong dans l'eau, veuillez le renvoyer un centre d'entretien agr.

Ne faites pas fonctionner l'appareil si des ouvertures sont bouches. Dgagez des ouvertures tous dbris susceptibles d'entraver le passage de l'air.

Ne faites pas fonctionner cet appareil proximit de fluides, de poussires ou de vapeurs inflammables.

Les travaux de maintenance et de rparation doivent absolument tre effectus par du personnel qualifi.

Lorsque vous laissez la machine sans surveillance, dbranchez-la.

Pendant le fonctionnement, il est ncessaire de faire attention aux autres personnes autour de soi, surtout aux enfants.

L'utilisation de l'appareil est exclusivement rserv des personnes formes et autorises.

Ne manipulez pas la fiche ou l'appareil les mains mouilles.

Ne dbranchez pas l'appareil en tirant sur le cordon. Pour le dbrancher, empoignez la fiche, non pas le cordon.

N'utilisez pas l'appareil si le cordon ou la fiche est endommag(e). Observez toutes les consignes figurant dans ce manuel au sujet de la mise la terre de l'appareil.

Ne tirez pas sur le cordon, ne portez pas l'appareil par le cordon, n'utilisez pas le cordon comme poigne, ne fermez pas une porte sur le cordon, ne tirez pas sur le cordon dans des angles ou des coins pointus.

Ne faites pas passer l'appareil par-dessus le cordon. Maintenez le cordon l'cart de surfaces chauffes.

Raccordez l'appareil une prise adquatement relie la terre. Voir les Consignes de mise la terre.

LIRE ET CONSERVER CES INSTRUCTIONS

86386990 Operators Manual - Floor Polisher

8

Safety

The following symbols are used throughout this guide as indicated in their descriptions:

HAZARD INTENSITY LEVEL

There are three levels of hazard intensity identified by signal words -WARNING and CAUTION and FOR SAFETY. The level of hazard intensity is determined by the following definitions:

WARNING - Hazards or unsafe practices which COULD result in severe personal injury or death.

CAUTION - Hazards or unsafe practices which could result in minor personal injury or product or property damage.

FOR SAFETY: To Identify actions which must be followed for safe operation of equipment. Report machine damage or faulty operation immediately. Do not use the machine if it is not in proper operating condition. Following is information that signals some potentially dangerous conditions to the operator or the equipment. Read this information carefully. Know when these conditions can exist. Locate all safety devices on the machine. Please take the necessary steps to train the machine operating personnel.

FOR SAFETY: DO NOT OPERATE MACHINE: Unless Trained and Authorized. Unless Operation Guide is Read and understood. In Flammable or Explosive areas. In areas with possible falling objects

WHEN SERVICING MACHINE: Avoid moving parts. Do not wear loose clothing; jackets, shirts, or sleeves when working on the machine. Use manufacturer approved replacement parts.

86386990 Operators Manual - Floor Polisher

9

Safety

Les symboles suivants sont utiliss dans tout ce manuel, tels que dcrits ici :

NIVEAU D'INTENSIT DU DANGER

Il existe trois niveaux d'intensit du danger, identifis par des termes d'avertissement - AVERTISSEMENT, ATTENTION et POUR VOTRE SCURIT. Le niveau d'intensit du danger est dtermin par les dfinitions suivantes :

AVERTISSEMENT - Dangers ou mthodes dangereuses qui POURRAIENT provoquer de graves blessures ou entraner la mort

ATTENTION - Dangers ou mthodes dangereuses qui pourraient provoquer des blessures lgres ou une dtriora- tion du produit ou des biens immobiliers.

POUR VOTRE SCURIT : ce signe permet didentifier les mesures de prcaution prendre pour assurer un bon fonctionnement du matriel.

Rendre compte immdiatement dune dfaillance ou dune dtrioration de la machine. Ne pas utiliser la machine si celle-ci ne fonctionne pas correctement. Lire soigneusement les informations ci-dessous signalant certains dangers potentiels pour loprateur de la machine. Loprateur doit tre absolument au courant de ces dangers potentiels. Localiser tous les dispositifs de scurit sur la machine. Il est conseill de prendre les mesures ncessaires pour former le personnel oprateur.

POUR VOTRE SCURIT : NE PAS MANOEUVRER LA MACHINE : Lorsquon nest pas expriment ou qualifi. Lorsque le guide dutilisation nest pas t lu ou compris. Dans des zones inflammables ou explosives.

Dans des zones o des objets peuvent tomber.

LORS DE LENTRETIEN DE LA MACHINE :

viter les parties amovibles. Ne pas porter de vtements amples, tels que des vestes, des chemises ou des vtements avec manches lors de lutilisation de la machine. Utiliser les pices dtaches homo- logues.

.

86386990 Operators Manual - Floor Polisher

10

Safety

Grounding Instructions

THIS PRODUCT IS FOR COMMERCIAL USE ONLY.

Electrical: In the USA this machine operates on a standard 15 amp 115V, 60 hz, A.C. power circuit . The amp, hertz, and voltage are listed on the data label found on each machine. Using voltages above or below those indicated on the data label will cause serious damage to the motors.

Extension Cords:

If an extension cord is used, the wire size must be at least one size larger than the power cord on the machine, and must be limited to 50 feet (15.5m) in length.

Grounding Instructions: This appliance must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be inserted into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

This appliance is for use on a nominal 120-volt circuit, and has a grounded plug that looks like the plug in Fig. A. A temporary adaptor that looks like the adaptor in Fig. C may be used to connect this plug to a 2-pole receptacle as shown in Fig. B, if a properly grounded outlet is not available. The temporary adaptor should be used only until a properly grounded outlet (Fig. A) can be installed by a qualified electrician. The green colored rigid ear, lug, or the like extending from the adaptor must be connected to a permanent ground such as a properly grounded outlet box cover. Whenever the adaptor is used, it must be held in place by a metal screw.

Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service person if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug provided with the appliance - if it will not fit the outlet, have a proper outlet installed by a qualified electrician. Use only GFCI protected receptacles.

Une connexion non conforme du conducteur de mise la terre de lappareil peut provoquer une d charge lectrique. Consulter un lectricien qualifi ou une personne du service aprs vente si vous suspectez que la prise de courant nest pas correctement mise la terre. Ne pas modifier la fiche fournie avec lappareil - si elle ne rentre pas dans la prise, faites installer une prise appr- roprie par un lectricien qualifi. Utilisez-le uniquement sur des rceptacles protgs GFCI.

86386990 Operators Manual - Floor Polisher

11

Notes

86386990 Operators Manual - Floor Polisher

12

Operations

Technical Specifications

ITEM DIMENSION/CAPACITY/MODEL

CONSTRUCTION Molded UL-recognized PE chassis with heavy- duty rubber bumper, tubular steel adjustable handle with die cast aluminum handle housing.

MOTOR

1.5HP 115V induction 17, 20

1.75 HP 115V 175/300RPM Dual Speed

BRUSH/PAD SPEED

175 rpm 17, 20

175/300 rpm Dual Speed

ELECTRICAL SYSTEM

115 volts, 60 Hz All Models

CABLE

50 (15 m), 14/3, built in cord wrap All Models

SWITCHES Dual levers with safety lock

WHEELS Two 5 (12.7 cm) dia., 1.25 (3 cm) wide, non- marking tread

HANDLE 1.5 (4 cm) tubular steel, adjustable, easy to use thumb activated safety lock

DIMENSIONS (L X W X H)

17 (43 cm) model 23.0 (58 cm) x 18 (46 cm) x 47 (119 cm)

20 (51 cm) model 25 (62 cm) x 21 (53 cm) x 47 (119 cm)

ADUSTABLE HEIGHT

WIDTH LENGTH

86386990 Operators Manual - Floor Polisher

13

Operations

Handle Installation

The handle must be installed by qualified personnel. Read all instructions thoroughly. The machine is shipped with handle unassembled.

La poigne doit tre installe par du personnel qualifi. Lisez toutes les instructions attentivement. La machine est livre avec la poigne dmonte.

The machine is shipped with handle unassembled.

Follow these steps for installation:

1. Remove handle and chassis assembly from carton.

2. Attach handle assembly to base using hardware kit (attached to handle in a plastic bag) items 1 and 2.

NOTE: The bushings (items 1) are required for the correct operation of the handle. The bushings are positioned inside the pivot holes in the chassis, and are held in place by tightening the screws (item 2) against the bushing.

3. Remove bolt, nut and washers (items 3, 4 and 5) from lower block on handle assembly. Attach links as shown. Tighten bolt and nut securely, then back off 1/4 to 1/2 turn.

4. Check handle for movement up and down.

5. Plug motor cord into handle cord receptacle.

(SEE NOTE)

HOLE PIVOT

ASSEMBLY CHASSIS

PLUG MOTOR

RECEPTACLE MOTOR PLUG

4 5

1

2

3

THE CORD ASM AND CORD HOOK. ASSEMBLY, CHECK ORIENTATION OF WHEN INSTALLING THE HANDLE

86386990 Operators Manual - Floor Polisher

14

Operations

Controls

1. Safety Lock Prevents unintended operation of the machine.

2. Switch Levers Turns machine on/off.

3. Adjustment Handle Allows the handle to be adjusted to a comfortable operating position

Handle Height Adjustment NOTE: The handle is in the up, locked position from the factory.

The handle adjust bar (1) for the polishers are individ- ually preset at the factory for optimum locking effi- ciency and minimum effort of engaging. It should not be necessary to adjust the handle adjust bar unless the handle adjustment bar (1) the washer (3) and nut (2) have been disturbed.

NOTE: It is incorrect to make it lock opposite from the way it was assembled by applying more force to the nut.

The pivot pin is off center in relationship to the axis of the handle. To adjust handle, tighten nut on handle while in the locked position. The handle is locked when the screw is to the outside of the machine and the flat on the opposite side of the handle is flush to the bracket.

1

2

3

2

1

2 3

4

PIVOT PIN LC

LC

LOCKING SIDE FLAT

HANDLE

86386990 Operators Manual - Floor Polisher

15

Operations

Machine Operation

For Indoor use only.

Pour utilisation l'intrieur seulement.

When using the pad, always keep the machine moving when in contact with the floor.

Lorsque vous utilisez le coussin protecteur, gardez toujours la machine en mouvement lorsqu'elle est en contact avec le sol.

High starting torque. Hold machine firmly with both hands.

Couple de dmarrage lev. Tenez la machine fermement deux mains.

1. Ensure that the pad driver is in good shape. Install or change pad if necessary.

2. Plug the machine into a wall outlet as described in the grounding instructions.

3. Lower the handle by unlocking the adjustment handle and moving the handle into position. Relock the handle when it is in a comfortable position.

Ensure that handle is locked in position before starting machine.

Assurez-vous que la poigne est bloque en position avant de dmarrer la machine.

4. Push the safety lock forward, unlocking the switch levers.

5. With the safety lock forward, squeeze one or both of the switch levers, turning the machine on. (These levers can be operated independently of each other). The safety lock will not re-engage until both levers are released.

6. To stop the machine, release the switch levers.

7. Do not let machine rest on pad. When finished with the machine, return handle to the storage position.

NOTE: The machine is equipped with a circuit breaker to protect the motor in the event an overload condition occurs. The circuit breaker is located on the handle. Push the reset button to restart the machine. If the breaker trips again, correct the cause of overloading before proceeding.

Daily Maintenance

1. Inspect power cord for wear. To prevent electrical shock replace cords with frayed or cracked insu- lation immediately.

2. Place machine in the storage position.

3. Check pad condition. Change if soiled or torn.

Pad Driver/ Brush Installation

1. Lay machine back, exposing the under side.

2. Place pad driver on the motor lug and rotate counter-clockwise until engaged. To remove, turn clockwise.

86386990 Operators Manual - Floor Polisher

16

Maintenance

Scrub Brushes NOTE: All original equipment brushes are equipped with Perform Alert. This feature will tell the operator when it is time to replace the scrub brushes. Perform Alert brushes have pre- trimmed bright yellow tufts to indicate the length of a worn out brush. When the tufts in the scrub brush wear to a length equal to the yellow tufts, the scrub brushes should be replaced.

There are five different types of brushes available to cover applications from cleaning heavily soiled floors to polishing. A pad driver is also available to take advantage of the many cleaning pads on the market and further add to the flexibility of the machine.

Please refer to the following to assist in selecting the proper brush or pad for the work at hand.

Uncoated Floors

Aggressive Grit is a nylon fiber impregnated with silicone carbide grit. It grinds away stain, soil, and removes surface material.

Mild Grit is a less aggressive silicone carbide grit suitable for cleaning medium soil conditions. Advan- tages are faster ground speed than nylon bristles on light solid applications.

Nylon is a general-purpose scrub brush with stiff bristles. Polypropylene works well for maintaining concrete, wood and tile floors.

Finished Floors

Nylon Polish is the softest brush. It will gently clean finished tile or terrazzo floors without removing floor finish or floor material. Used for washing highly polished or burnished floors.

Nylon bristles are used in a variety of applications on coated or uncoated surfaces.

White Pads (Polishing) are used for dry polishing to achieve a high-gloss appearance, or surface washing on highly polished or burnished floors.

Red Pads (Buffing) are used for light-duty scrubbing. When used with a mild detergent they will provide surface cleaning without removing the finish.

Blue Pads (Scrubbing) are used for heavy-duty scrubbing and light stripping. The blue pads remove less finish than brown stripping pads, yet will remove black marks, stains and dirt.

Brown Pads (Stripping) are used for easy and complete removal of old floor waxes/finishes. They will quickly remove ground in dirt, black heel marks, and spills. When used with the proper stripper, this pad leaves the floor clean and ready for finishing.

The scrub brushes should be checked before each days work for wire, string, wear and damage. The scrub brushes should be replaced if brush bristles are missing or if yellow Perform Alert indicates minimum brush length.

86386990 Operators Manual - Floor Polisher

Service Schedule

MAINTENANCE DAILY MONTHLY

Check pad wear to prevent buildup of chemicals *

Check pad driver system for damage *

Check handles, switches, and knobs for damage *

Store with pad off the floor *

Check all bearings for noise *

Check skirt/bumpers for damage and replace as necessary *

Check overall performance of machine *

17

Maintenance

Machine Troubleshooting

PROBLEM CAUSE SOLUTION

Machine will not run

Circuit breaker tripped in building. Check and reset.

Power switch failure Test switch for continuity and replace if necessary.

Tripped circuit breaker Reset.

Faulty power cord Replace.

Fuse in motor blown

(Dual speed only)

Replace

CAUTION: To reduce the risk of electrical shock, unplug the machine before opening fuse holder. Fuse will only open under extreme conditions. Investigate cause before replacing.

Electrical shock

Equipment not grounded Follow grounding instructions exactly.

Receptacle not grounded Have an electrician inspects buildings wiring.

Internal wiring problem

Ensure that the machine wiring matches the appropriate wiring diagram. Replace any wires or components that are short circu- iting.

Repeated circuit breaker tripping

Mechanical problem Higher amp draws indicate a mechanical problem. Find the problem before using the machine.

Faulty circuit breaker Test circuit for continuity. Replace circuit breaker if necessary.

Excessive vibration

Pad not centered Re-center pad.

Damaged or unevenly worn pad Replace pad. Do not rest machine on pad when not in use.

Damaged pad driver Replace.

Pad does not turn but motor is running

Shear coupling has failed Replace coupling.

86386990 Operators Manual - Floor Polisher

18

Suggested Spare Parts

86377960 COUPLING

86000140 BRUSH, 17" NYL. POL. W/CLT.PLT 86283800 BRUSH, 17" NYL.SCRUB W/CLT.PLT 86000130 BRUSH, 17" MILD GRIT W/CLT.PLT 86283710 BRUSH, 17" AGG. MALGRIT W/C.P 86000110 BRUSH, 17" POLYPRO W/CLT. PLT 86283790 BRUSH, 20" NYL.POL.W/CLT.PLT.SFT 86283770 BRUSH, 20 NYL.SCRUB W/CLT.PLT 86283780 BRUSH, 20" MILD GRIT W/CLT.PLT 86283690 BRUSH, 20" AGG. MALGRIT W/C.P. 86283700 BRUSH, 18" POLYPRO W/CLT. PLT

86000120 PAD DRIVER, 17" POLISHER 86284290 PAD DRIVER, 19 HS 86284300 PAD DRIVER, 20" POLISHER

86224740 SPRING

Manualsnet FAQs

If you want to find out how the U17X Karcher works, you can view and download the Karcher U17X BDS 43 175 C 1.009-096.0 Operator's Manual on the Manualsnet website.

Yes, we have the Operator's Manual for Karcher U17X as well as other Karcher manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Operator's Manual should include all the details that are needed to use a Karcher U17X. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Karcher U17X BDS 43 175 C 1.009-096.0 Operator's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Karcher U17X BDS 43 175 C 1.009-096.0 Operator's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Karcher U17X BDS 43 175 C 1.009-096.0 Operator's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Karcher U17X BDS 43 175 C 1.009-096.0 Operator's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Karcher U17X BDS 43 175 C 1.009-096.0 Operator's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.