Contents

JVC LT-19E33B Instruction Manual PDF

1 of 62
1 of 62

Summary of Content for JVC LT-19E33B Instruction Manual PDF

Instruction Manual

19 HD LED TV

LT-19E33B / LT-19E33W

GB

Contents

1 Safety Warnings ...........................................................................................................................................................................4

2 Preparation ...................................................................................................................................................................................6 Unpacking the TV ...............................................................................................................................................................................................................6 Installing / Removing the Base Stand .........................................................................................................................................................................7

Installing the Base Stand ......................................................................................................................................................................................7 Mounting the TV to a Wall ...................................................................................................................................................................................7

Front View and Rear View Controls ..............................................................................................................................................................................8 Rear View and Sockets ......................................................................................................................................................................................................9 Installing Batteries in the Remote Control ..............................................................................................................................................................10 Remote Control Operation Range ..............................................................................................................................................................................10 Remote Control .................................................................................................................................................................................................................11

3 Connections ................................................................................................................................................................................13 Making Video and Audio Connections .....................................................................................................................................................................13 Connecting an AV Device Using an HDMI Cable...................................................................................................................................................13 Connecting a Computer Using a VGA Cable ..........................................................................................................................................................14 Connecting an AV Device Using a Component (YPbPr) Cable ........................................................................................................................14 Connecting an AV Device Using a SCART Cable ...................................................................................................................................................15 Connecting an AV Device Using Composite Cable ..............................................................................................................................................15 Connecting a Coaxial Audio Receiver .......................................................................................................................................................................16 Connecting Headphones ...............................................................................................................................................................................................16

4 Initial Setup ................................................................................................................................................................................17 Turning the TV On for the First Time .........................................................................................................................................................................17

Target Region Setting .........................................................................................................................................................................................18 Selecting the Input Source ................................................................................................................................................................................19 Channel Selection ...............................................................................................................................................................................................19 Listening to the Radio (Radio Mode) .............................................................................................................................................................19 Display Channel Information ...........................................................................................................................................................................19 Volume Adjustment .............................................................................................................................................................................................19 Optimum Viewing ............................................................................................................................................................................................... 20

5 Customising TV Settings ...........................................................................................................................................................21 Channel Setting (TV, DTV or Radio Mode) ...............................................................................................................................................................21

Auto Tuning (DVB-T) ............................................................................................................................................................................................21 Auto Tuning (DVB-C) .......................................................................................................................................................................................... 22 DTV Manual Tuning (DVB-T) ............................................................................................................................................................................ 23 DTV Manual Tuning (DVB-C)............................................................................................................................................................................ 23 ATV Manual Tuning ............................................................................................................................................................................................. 24 Channel Edit (ATV / DTV Mode) ...................................................................................................................................................................... 25 Signal Information (DTV Mode) (DVB-T) ..................................................................................................................................................... 26 Signal Information (DTV Mode) (DVB-C) ..................................................................................................................................................... 26 CI (Common Interface) (DTV Mode) .............................................................................................................................................................. 27 Software Update (USB) ...................................................................................................................................................................................... 28 Software Update (Over Air Download) (DVB-T) ....................................................................................................................................... 28 OAD Tuning (DVB-T) ........................................................................................................................................................................................... 29

Picture Setting .................................................................................................................................................................................................................. 30 Sound Setting ................................................................................................................................................................................................................... 33

Stereo / Dual Sound Reception (ATV Mode) .............................................................................................................................................. 33 Speaker Sound Output Selection (DTV Mode) ......................................................................................................................................... 34

Time Settings..................................................................................................................................................................................................................... 34

Option Setting .................................................................................................................................................................................................................. 36 OSD Language ...................................................................................................................................................................................................... 36 Audio Language (DTV Mode) .......................................................................................................................................................................... 36 Subtitle Language (DTV Mode) ...................................................................................................................................................................... 37 Hearing Impaired ................................................................................................................................................................................................. 38 Country .................................................................................................................................................................................................................... 38 PVR File System (DTV Mode) ............................................................................................................................................................................ 38 Restore Factory Default ..................................................................................................................................................................................... 39 HDMI CEC (Consumer Electronics Control) ................................................................................................................................................ 40 HDMI ARC (Audio Return Channel) ................................................................................................................................................................41

Lock Setting ....................................................................................................................................................................................................................... 42 Lock System ........................................................................................................................................................................................................... 42 Set Password ......................................................................................................................................................................................................... 43 Block Channel ....................................................................................................................................................................................................... 44 Parental Guidance ............................................................................................................................................................................................... 45

6 Using the Features .....................................................................................................................................................................46 EPG (Electronic Programme Guide) (DTV or Radio Mode) ............................................................................................................................... 46

Switch On / Off EPG ............................................................................................................................................................................................. 46 Select a Programme ........................................................................................................................................................................................... 46

Teletext (ATV Mode) ........................................................................................................................................................................................................ 47 To Turn on Teletext Function........................................................................................................................................................................... 47

Digital Teletext (DTV Mode) ......................................................................................................................................................................................... 48 Teletext within Digital Service ........................................................................................................................................................................ 48

7 Entertainment ............................................................................................................................................................................49 Connecting a USB Storage Device ............................................................................................................................................................................. 49 Viewing Photos ................................................................................................................................................................................................................. 49 Listening to Music ............................................................................................................................................................................................................ 50 Viewing Movies .................................................................................................................................................................................................................51 My Text................................................................................................................................................................................................................................. 52

8 PVR (Personal Video Recorder) .................................................................................................................................................53 Time Shift Function ......................................................................................................................................................................................................... 53 Recording DTV Programme onto a USB Storage Device .................................................................................................................................. 54 Timer Programming ....................................................................................................................................................................................................... 55 Playing Recorded Programme ................................................................................................................................................................................... 56

9 Other Information ......................................................................................................................................................................57 Maintenance ...................................................................................................................................................................................................................... 57 Hints and Tips .................................................................................................................................................................................................................... 57 Display Modes ................................................................................................................................................................................................................... 59

YPbPr Mode ........................................................................................................................................................................................................... 59 PC Mode .................................................................................................................................................................................................................. 59 HDMI Mode ........................................................................................................................................................................................................... 59

Specifications .................................................................................................................................................................................................................... 60

4

GB

1 Safety Warnings Read all the instructions carefully before using the unit

and keep them for future reference.

Retain the manual. If you pass the unit onto a third party make sure to include this manual.

Check that the voltage marked on the rating label matches your mains voltage.

Damage Please inspect the unit for damage after unpacking.

Do not continue to operate the unit if you are in any doubt about it working normally, or if it is damaged in any way - switch off, withdraw the mains plug and consult your dealer.

Location of Unit The unit must be placed on a flat stable surface and

should not be subjected to vibrations.

Do not place the unit on sloped or unstable surfaces as the unit may fall off or tip over.

The mains socket must be located near the unit and should be easily accessible.

This unit is designed for indoor, domestic use only.

Temperature Avoid extreme degrees of temperature, either hot or

cold. Place the unit well away from heat sources such as radiators or gas / electric fires.

Avoid exposure to direct sunlight and other sources of heat.

Naked Flames Never place any type of candle or naked flame on the

top of or near the unit.

Moisture To reduce the risk of fire, electric shock or product

damage, do not expose this unit to rain, moisture, dripping or splashing. No objects filled with liquids, such as vases, should be placed on the unit.

If you spill any liquid into the unit, it can cause serious damage. Switch it off at the mains immediately. Withdraw the mains plug and consult your dealer.

Ventilation To prevent the risk of electric shock or fire hazard

due to overheating, ensure that curtains and other materials do not obstruct the ventilation vents.

Do not install or place this unit in a bookcase, built-in cabinet or in another confined space. Ensure the unit is well ventilated.

Make sure that there is a gap of at least 10 cm on both sides and a gap of 20 cm at the top.

Unplug the unit from the mains socket during a lightning storm.

Mains Cable Make sure the unit or unit stand is not resting on top of

the mains cable, as the weight of the unit may damage the mains cable and create a safety hazard.

If the mains cable is damaged it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.

Interference Do not place the unit on or near appliances which may

cause electromagnetic interference. If you do, it may adversely affect the operating performance of the unit, and cause a distorted picture or sound.

Optimum viewing View the unit in moderate light to prevent eye strain. It

is recommended to watch the unit from a distance 3-7 times that of the screen height.

LCD screen The LCD screen is manufactured using high-precision

technology. However, some tiny black points and / or bright points (red, blue or green in colour) may constantly appear on the LCD screen. These points are generated in the manufacturing process and are normal.

Screen Burn A characteristic of Plasma and TV Panels is that

displaying the same image for a long time may cause a permanent after-image to remain on the screen. This is called screen burn. Most pictures shown on the unit will be constantly moving and fill the screen.

Examples of images that you need to watch out for are as follows (this is not an all-inclusive list):

1. Black Bars: If black bars appear at the left / right or top / bottom of the screen, it is recommended to change the format so that the picture fills the entire screen.

2. TV Channel Logos: e.g. Shopping channel logos and pricing displays - especially if they are bright and stationary. Moving or low-contrast graphics are less likely to cause ageing of the screen.

3. Time Displays 4. Teletext: Do not view a stationary page for long

periods of time.

5. TV Menus 6. Pause Mode: Do not leave the screen in pause

mode for long periods of time, e.g. when watching videos.

To prevent screen burn if viewing any of the above for long periods of time, reduce contrast and brightness when viewing. Once burn-in occurs it will never disappear completely.

Earphones Listening to loud sounds for prolonged periods of time

may permanently damage your hearing.

Before putting on earphones, turn the volume down then put the earphones on and slowly increase the volume until you reach a comfortable listening level.

10 cm 10 cm

20 cm

10 cm

Chapter

1

Safety Always disconnect the unit from the mains supply

before connecting / disconnecting other devices or moving the unit.

5

1Safety Warnings

GB Standby The button on the remote control does not switch

off the unit completely. The unit will continue to draw electricity from the mains supply while in standby. In the interests of safety and to avoid unnecessary energy consumption, never leave the unit in standby while unattended for long periods of time, e.g. overnight, while on holiday or while out of the house. Disconnect the mains plug from the mains socket.

Batteries Batteries used in the remote control for this unit

are easily swallowed by young children and this is dangerous.

Keep loose batteries away from young children and make sure that the battery holder tray is secure in the remote control. Seek medical advice if you believe a cell has been swallowed.

Please dispose of batteries correctly by following the guidance in this manual.

The batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

Supervision Children should be supervised to ensure that they do

not play with the unit and the remote control.

Never let anyone especially children push anything into the holes, slots or any other openings in the case - this could result in a fatal electric shock.

CAUTION RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the units enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the manual accompanying the unit.

Service To reduce the risk of electric shock, do not remove

screws. The unit does not contain any user-serviceable parts. Please leave all maintenance work to qualified personnel.

Do not open any fixed covers as this may expose dangerous voltages.

Maintenance Ensure to unplug the unit from the mains socket before

cleaning.

Do not use any type of abrasive pad or abrasive cleaning solutions as these may damage the units surface.

Do not use liquids to clean the unit.

The wall socket plug is used as a disconnect device, the disconnect device should be readily accessible.

This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.

To prevent the spread of fire, keep candles or other open flames away from this product at all times.

6

GB

2 Preparation

Unpacking the TV

Remove all packaging from the TV. Retain the packaging. If you dispose of it please do so according to local regulations.

The following items are included:

Instruction Manual Quick Start Guide

TV Base

TV Stand Support

Remote Control / AAA Batteries x 2TV

Screw A x 1 Screw B x 3

Thank you for purchasing your new JVC TV.

Your new TV has many features and incorporates the latest technology to enhance your viewing experience. We recommend that you spend some time reading this instruction manual so that you fully understand these features. You will also find some hints and tips to help you resolve any issues.

Read all the safety instructions carefully before use and keep this instruction manual for future reference.

Chapter

2

2Preparation

7

GB

4. To install the base stand, align the screw holes, then secure with a screw driver (not included) using the 3 screw B provided.

1. Disconnect all cables connected to the TV.

2. Lay the TV down on a flat surface with the back side facing up, and ideally at the edge of a table so that the base of the TV slightly overhangs on it. Please make sure a soft cushioned material (such as a pillow or thick piece of foam) is placed beneath the screen.

Installing the Base Stand 3. To install the TV stand, first attach the stand support to the TV

by using screw A. Align with the screw hole then use screws to fix the stand support to the TV.

1. To remove the stand assembly, untighten the screws holding the stand assembly to the rear of the TV. Slide the stand assembly out.

2. Mounting on the wall. This TV is designed to be wall-mounted with a standard 100 mm x 100 mm mounting kit (sold separately) designed for flat-panel TVs. Mount this TV according to the instructions included in the mounting kit. Due to space restrictions, we recommend that you make all connections (refer to page 13-16 and page 49 for details) before mounting on to the wall.

Installing / Removing the Base Stand

The LCD display is very fragile, and must be protected at all times when installing and removing the base stand. Be sure that no hard or sharp object, or anything that could scratch or damage the LCD display, comes into contact with it. DO NOT exert pressure on the front of the TV at any time because the screen could crack.

Remove the stand assembly before mounting the TV onto the wall.

Keep all the spare screws should you want to use the stand assembly option.

The screw holes will only align if the front of the base stand is at the front of the TV.

Please read this instruction manual carefully while setting up your TV.

If you require additional assistance please click on the link for Support Centre: Norway: www.elkjop.no/service Sweden: www.elgiganten.se/service Denmark: www.elgiganten.dk/service Finland: www.gigantti.fi/huolto

100 mm

100 m m

Four mounting holes (size M4x5 screw)

Screw B x 3

TV Front Base Stand Front

screw in

Screw A x 1

screw in

unscrew

Screw A x 1

Mounting the TV to a Wall

2

8

Preparation

GB Front View and Rear View Controls

Item Description

1 POWER LED Illuminates blue when the TV is turned on. Illuminates red when the TV is in standby mode. The LED will illuminate in blue and then blink in red and blue, confirming that a timer recording programme has started in standby mode.

2 IR (Infrared Receiver) Receives IR signals from the remote control. Do not put anything near the sensor, as its function may be affected.

3 INPUT Press to select among different input signal sources: DTV / ATV / AV / SCART / YPbPr / HDMI1 / HDMI2 / PC / USB. Confirmed selection on the OSD menu.

4 MENU Displays the OSD (on screen display) menu.

5 CH + / Press to select a channel or select a sub-menu from the OSD menu.

6 VOL + / Adjusts the volume. Press to select and adjust a setting in the OSD menu.

7 Switches the TV on from standby mode. Switches the TV back to standby mode.

1 2

4

3

7

6

5

2Preparation

9

GB Rear View and Sockets

Item Description

1 POWER ON/OFF Switches on the POWER ON/OFF switch to turn the TV to standby mode.

2 VIDEO / AUDIO (L/R) Connects to the Composite VIDEO and AUDIO (L/R) output sockets on external video devices.

3 Y, PB, PR / AUDIO (L/R) Connects to a DVD player, Digital Set-Top-Box, or other AV devices with component (YPbPr) video and audio output sockets.

4 SPDIF OUTPUT Connects to the audio socket on the digital/standard 5.1 audio system.

5 SCART Connects to a VCR, DVD Player, or other AV device with a SCART output socket.

6 RF Aerial Connects to the aerial socket on the wall with the RF coaxial cable.

7 PC IN / PC AUDIO Connects to a computer or other devices with a VGA interface.

8 COMMON INTERFACE Allows the insertion of a Common Access Module.

9 HEADPHONE Connects to the headphones.

10 HDMI1(ARC) / HDMI2 Connects to a High-Definition (HD) signal output device, such as a set-top box, blu-ray disc player or AV receiver.

11 USB Allows the insertion of a USB storage device to play video, audio, photo and text files (USB mode) and record DTV programmes on to a USB storage device.

U S

B

5V 50

0m A

H D

M I2

H D

M I1

(A R

C )

P C

IN R

F C

O M

M O

N I

N TE

R FA

C E

(C I)

H E

A D

P H

O N

E P

C A

U D

IO

6

8

9

7

11

10

SCART

RL SPDIF OUTPUT

Pb PrY

VIDEO

542 3

1

2

10

Preparation

GB

Remote Control Operation Range

Point the remote control at the TV no more than 5 metres from the remote control sensor on the TV and within 60 in front of the TV. The operating distance may vary depending on the brightness of the room.

Installing Batteries in the Remote Control

1. Press and lift the back cover to open the battery compartment of the remote control.

2. Insert two AAA size batteries. Make sure the (+) and ( - ) ends of the batteries match the (+) and ( - ) ends indicated in the battery compartment.

3. Close the battery compartment cover.

30 30

5M

Handling the Batteries Improper or incorrect use of batteries may cause

corrosion or battery leakage, which could cause fire, personal injury or damage to property.

Only use the battery type indicated in this manual.

When the batteries are exhausted, the remote will not function. Replace both batteries at the same time with new ones.

Do not install new batteries with used ones and do not mix different types of batteries.

Do not dispose of used batteries as domestic waste. Dispose of them in accordance with local regulations.

Handling the Remote Control Take care of your fingernails when you press and hold

the battery release tab.

Do not drop or cause impact to the remote control.

Do not spill water or any liquid on the remote control.

Do not place the remote control on a wet object.

Do not place the remote control under direct sunlight or near sources of excessive heat.

Remove the battery from the remote control when not in use for a long period of time, as it could cause corrosion or battery leakage and may result in physical injury and/or property damage including fire.

2Preparation

11

GB 1. (Mute)

Mute and restore your TV sound.

2. Switch the TV between on and standby mode.

3. ASPECT Watch the screen in various formats: Auto / 4:3 / 16:9 / Zoom / Subtitle / SmartZoom.

S.MODE Select sound mode: Standard / Music / Movie / Sports / User.

P.MODE Select picture mode: Standard / Mild / User / Dynamic.

GUIDE Displays the EPG Electronic Programme Guide. (DTV mode)

4. 0-9 Number Button Press to select a programme.

5. LIST Display the channel list. (ATV / DTV mode) Display the text page on the teletext screen. (ATV mode)

6. (Recall) Return to the previous viewing channel. (ATV / DTV mode)

7. S (Subtitle) Display subtitles which are broadcast with the programme. (DTV mode)

TEXT Turn on and off the teletext function. (ATV / DTV mode)

MIX Select TELETEXT with a TV programme. (ATV mode)

SIZE Enlarge the picture on the TV in teletext. (ATV mode)

8. HOLD Freeze a multi-page passage on screen in teletext. (ATV mode)

REVEAL Reveal hidden information such as the answer to a quiz in teletext. (ATV mode)

SUB.PAGE Display the subpage on the teletext screen. (ATV mode)

INDEX Select the page number of the index from teletext. (ATV mode)

9. i Display the present channel information such as the current time and channel name. (ATV / DTV mode)

FAV Display the favourite channel list. (ATV / DTV mode)

TV.RD A short-cut to switch input source to TV / Digital radio channels.

AUDIO Turn on / off the Audio Description (AD) function (only

applicable when the TV programme has this feature). (DTV mode)

Select Stereo / Dual Sound Reception. (ATV mode)

Remote Control

1 2

6

4

5

9

8

7

3

2

12

Preparation

GB 10. MENU

Display the OSD (On Screen Display) menu.

11. INPUT Select among the different input signal sources: DTV / ATV / AV / SCART / YPbPr / HDMI1 / HDMI2 / PC / USB.

12. Allows you to navigate the OSD menus and adjust the system settings to your preference.

OK Confirm the selection in the OSD menus.

13. BACK Return to the previous menu in the OSD menus.

14. Exit Exit the OSD menu.

15. SLEEP Set the TV sleep timer: OFF / 10 / 20 / / 180 / 240 min.

16. VOL + / Adjust the volume.

17. PROG Display the channel edit menu. (ATV / DTV mode)

18. CH + / Select a channel.

19. (Play) Start playback. (USB mode)

(Pause) Pause playback. (USB mode) Start the time-shift function (DTV mode)

(Stop) Stop the playback or recording. (USB / DTV mode)

(Rec) Record the current programme. (DTV mode).

20. (Prev) To skip to the beginning of the previous chapter / track / photo. (USB mode)

(Next) Skip to the beginning of the next chapter / track / photo. (USB mode)

(Reverse) Reverse playback rapidly. (USB mode)

(Forward) Advance playback rapidly. (USB mode)

21. Coloured buttons Access the TELETEXT items. (ATV / DTV mode) Access menu options.

11

14

18

10

13

16

15

17

20

19

21

12

13

GB

Connecting an AV Device Using an HDMI Cable

This TV can accept High-Definition Multimedia Interface (HDMI) supports HDCP (High-Bandwidth Digital Content Protection) Protocol.

This TV has a total of 2 HDMI input sockets, please make sure the correct input source is selected and corresponds to your connected HDMI input socket.

When you connect to the output of an HD ready player (blu-ray disc player, game console, set-top box or computer) switch to the HDMI function and the TV will automatically detect the resolution used by the HDMI source.

To get the best picture quality, adjust the blu-ray disc player, game console or set-top box output resolution up to 1920 x 1080p.

1. Use an HDMI cable to connect the TVs HDMI input socket to the external AV devices HDMI output socket.

2. Plug the connected devices into the mains socket before switching on the POWER ON/OFF switch which is located at the front right side under the frame.

3. Press the button on the right side panel of the TV or on the remote control to turn on your TV.

4. Press the button on the right side panel of the TV or the INPUT button on the remote control to display the Source List. Use the buttons to select HDMI1 / HDMI2 and then press the OK button to confirm.

Making Video and Audio Connections

Not all AV devices have the ability to connect to a TV, please refer to the owners manual of your AV device for compatibility and connection procedures.

When connecting any external AV device, do not connect the mains cable to the mains socket until all other connections are complete.

Signal Type Separate Audio Connection Required

HDMI1 HDMI (480i/480p/576i/576p/720p/1080i/1080p*)

No

PC IN

PC Yes

Y PB PR Component Video (480i/480p/576i/576p/720p/1080i/1080p*)

Yes R L

SCART

SCART (RGB Input) No

VIDEO Composite Video

Yes R L

Best Video Performance

USB

5V 500mA

HDMI2 HDMI1(ARC) PC IN RFCOMMON INTERFACE (CI)

HEADPHONE PC AUDIO

Rear Right Side View of TV

HDMI Cable (not included)

Blu-ray Player / DVD Player / Recorder

Set-top BoxGame Console

3 Connections Chapter

3

Although this TV is able to connect to an HDMI device, it is possible that some devices may not operate correctly.

*1080i/1080p: Although this TV is compatible with a 1080i/1080p input, it is possible that the screen may not display the exact resolution and consequently the picture quality will be adjusted accordingly.

14

3 Connections

GB

Connecting an AV Device Using a Component (YPbPr) Cable

1. Use a component cable to connect the TVs YPbPr input sockets to an external AV devices component output sockets.

2. Use an AV cable to connect the TVs AUDIO(L/R) input sockets to the external AV devices component audio output sockets. (Audio Left = white, and Audio Right = red)

Component port on the TV Y Pb Pr

Video output ports on DVD player

Y Pb Pr

Y Cb Cr

3. Plug the connected devices into the mains socket before switching on the POWER ON/OFF switch which is located at the front right side under the frame.

4. Press the button on the right side panel of the TV or on the remote control to turn on your TV.

5. Press the button on the right side panel of the TV or the INPUT button on the remote control to display the Source List. Use the buttons to select YPbPr and then press the OK button to confirm.

Connecting a Computer Using a VGA Cable

1. Use a VGA cable to connect the TVs PC IN input socket to a computers VGA output socket. Use an audio cable to connect the TVs PC AUDIO input socket to the computers audio output socket.

2. Plug the connected devices into the mains socket before switching on the POWER ON/OFF switch which is located at the front right side under the frame.

3. Press the button on the right side panel of the TV or on the remote control to turn on your TV.

4. Press the button on the right side panel of the TV or the INPUT button on the remote control to display the Source List. Use the buttons to select PC and then press the OK button to confirm.

Rear Right Side View of TV

Computer

USB

5V 500mA

HDMI2 HDMI1(ARC) PC IN RFCOMMON INTERFACE (CI)

HEADPHONE PC AUDIO

VGA Cable (not included)

Audio Cable (not included)

The best resolution is 1366 x 768.

If your computer is set to shut down after a few minutes in the idle mode, the TV will also switch to standby due to no signal being received, this is to save energy. Press the button on the right side panel of the TV or on the remote control to restart the TV.

Video Camera

Blu-ray Player / DVD Player / Recorder

Set-top BoxGame Console

L R

C O

M PO

N EN

T O

U T

Y Pr

Pb

AV Cable (not included)

Ye llo

w (V

id eo

)

Re d

(R )

W hi

te (L

)

Yellow (Video)

Red (R)

W hite (L)

Component Cable (not included)

Pb/Cb

Pr/Cr

Y

Pb /C

b

Pr /C

r

Y

SCART

RL SPDIF OUTPUT

Pb PrY

VIDEO

Rear Bottom View of TV

Satellite Receiver

Satellite antenna cable

15

3Connections

GB Connecting an AV Device Using a SCART Cable

1. Use a SCART cable to connect the TVs SCART input socket to an external AV devices SCART output socket.

2. Plug the connected devices into the mains socket before switching on the POWER ON/OFF switch which is located at the front right side under the frame.

3. Press the button on the right side panel of the TV or on the remote control to turn on your TV.

4. The TV will change the input source to SCART automatically once the AV device is switched on.

Connecting an AV Device Using Composite Cable

1. Use an AV cable to connect the TVs AUDIO(L/R) / VIDEO input sockets to the external AV devices composite audio / video output sockets. (VIDEO = yellow, Audio Left = white, and Audio Right = red)

2. Plug the connected devices into the mains socket before switching on the POWER ON/OFF switch which is located at the front right side under the frame.

3. Press the button on the right side panel of the TV or on the remote control to turn on your TV.

4. Press the button on the right side panel of the TV or the INPUT button on the remote control to display the Source List. Use the buttons to select AV and then press the OK button to confirm.

SCART

RL SPDIF OUTPUT

Pb PrY

VIDEO

SCART Cable (not included)

VCR

DVD Player / Recorder

Set-top Box

Satellite Receiver

Satellite antenna cable

Rear Bottom View of TV

Video Camera

VCR

DVD Player / Recorder

Set-top BoxGame Console

AV Cable (not included)

Ye llo

w (V

id eo

)

Re d

(R )

W hi

te (L

)

Yellow (Video)

Red (R)

W hite (L)

SCART

RL SPDIF OUTPUT

Pb PrY

VIDEO

Rear Bottom View of TV

Satellite Receiver

Satellite antenna cable

16

3 Connections

GB Connecting a Coaxial Audio Receiver

For better sound quality, you may want to play the audio through your multi-channel audio receiver.

1. Use an audio cable to connect the TVs SPDIF OUTPUT socket to an external audio receivers audio coaxial input socket.

2. Plug the connected devices into the mains socket before switching on the POWER ON/OFF switch which is located at the front right side under the frame.

3. Press the button on the right side panel of the TV or on the remote control to turn on your TV.

4. Press the button on the right side panel of the TV or the INPUT button on the remote control to display the Source List. Use the buttons on the remote control to select the desired input source and then press the OK button to confirm.

Connecting Headphones

Connect your headphones to the TVs HEADPHONE socket.

Before putting on the headphones, turn the volume down then put the headphones on and slowly increase the volume until you reach a comfortable listening level.

Rear Right Side View of TV USB

5V 500mA

HDMI2 HDMI1(ARC) PC IN RFCOMMON INTERFACE (CI)

HEADPHONE PC AUDIO

Earphones Cable (not included)

Rear Bottom View of TV

SCART

RL SPDIF OUTPUT

Pb PrY

VIDEO

Audio Cable (not included)

Audio Receiver

The TVs volume will not be affected. You may control the audio level via the Audio Receiver.

Long-term exposure to loud music may cause hearing damage. It is best to avoid extreme volume when using headphones, especially for extended periods.

17

GB

6. Press the buttons to select your desired language to be displayed on the menu. The default on-screen menu language is set as English. Press the OK button to confirm.

Turning the TV On for the First Time

1. Connect one end of the RF coaxial cable to the aerial socket on the wall and the other end of the cable to the RF (75) socket at the rear right side of your TV.

2. Connect the mains cable to the mains socket after you have completed all the connections.

3. Switch on the POWER ON/OFF switch which is located at the front right side under the frame. At this stage, the TV switches to standby mode. The red LED indicator will illuminate on the front panel of the TV.

4. In standby mode, press the button on the right side panel of the TV or on the remote control to turn the TV on. The red LED indicator will turn blue.

5. The first time you turn the TV on, it will go straight into the First Time Installation menu. Please ensure the aerial is plugged in and then press the OK button. (If you have already installed the TV using the Quick Start Guide, please go to the section Selecting the Input Source on the next page.)

OK

English

Svenska

Dansk

esky

Slovak

Norsk

Suomi

Please select an OSD Language

First Time Installation

Please ensure aerial is plugged in!

Then press OK button.

USB

5V 500mA

HDMI2 HDMI1(ARC) PC IN RFCOMMON INTERFACE (CI)

HEADPHONE PC AUDIO

RF coaxial cable (not included)

OR

To the mains socket

7. Press the buttons to select your desired mode and then press the OK button. Press the button to select Yes to confirm or the button to select No to cancel and return to the Mode Select menu.

Home Mode Intended for use in home environment.

Shop Mode Intended for use in retail environment.

OK

Home Mode

Shop Mode

Mode Select

4 Initial Setup Chapter

4

Do not connect the TV to the mains supply until you have completed all the connections.

Always disconnect the TV from the mains socket when not in use for a long period of time.

The button on the right side panel of the TV or on the remote control is only used for switching the TV into standby, it does not disconnect the TV from the mains power. To completely disconnect the mains power, please remove the mains plug from the mains socket or switch off the POWER ON/OFF switch.

For the best picture quality in your home environment, we recommend setting the TV to Home Mode.

In Shop Mode, the default Picture Mode under the PICTURE menu is set as Dynamic (please refer to page 31 for details) and the Backlight is set as 10 (please refer to page 32 for details).

18

4 Initial Setup

GB 8. Press the buttons to select DVB-T / DVB-C and then press the OK

button to confirm.

DVB-C

DVB Select type

DVB-T

9. Channel tuning will commence. This operation may take up to 6 minutes. The display will show the progress of the tuning and the number of channels found.

10. If you want to skip the DTV tuning, press the MENU button to interrupt the tuning half way. A pop-up screen will be displayed, press the button to select Yes to confirm.

11. After tuning is complete, the channels are arranged in a preset order. If you wish to skip channels, modify the preset order or rename channels, select Channel Edit under the Channel menu (refer to page 25 for details).

Target Region Setting During tuning your TV may have received signals from more than one transmitter. If this has occurred the Target Region Setting screen will be displayed. This will enable you to select the correct regional transmission for the local news service that you require.

Press the buttons to adjust each option's setting and then press the OK button to confirm.

Country Code This will be shown as GBR for the UK.

Primary Region This will show the regional country (e.g. England, Wales, Scotland, NI).

Secondary Region This will allow you to set the region for your local news service on BBC and ITV (e.g. London, Beds and Cambs etc).

Tertiary Region You may receive signals from more than one transmitter within the Secondary Region, (e.g Beds and Cambs may have Luton or Sandy Heath).

b. If you select DVB-C, the next step is to configure the DVB-C system (Scan type / Frequency / Network ID / Symbol(ks/s)). Press the OK button to go to the tune type and add country select menu. This step is the same as the DVB-T's select the tune type (DTV / ATV) process. Press the buttons to select the desired country and then press the OK button to start tuning.

a. If you select DVB-T, press the buttons to select DTV / ATV / ATV + DTV. Press the button and then press the buttons to select the desired country and. Press the OK button to start tuning.

Tune Type DTV

Germany

Greece

Hungary

Italy

Ireland

Luxembourg

Netherlands

Norway

Poland

MENU

DVB-C Scan Menu

Scan type Full

610000

Auto

Auto

Frequency

Network ID

Symbol(ks/s)

OK MENU

Channel Tuning

DTV : 3 Channel(s) Radio : 0 Channel(s) Data : 0 Channel(s)

36% UHF CH

Press [MENU] to skip.

(DTV)

Target Region Setting

Country Code GBR

Primary Region England

Secondary Region

Tertiary Region

London

19

4Initial Setup

GB Selecting the Input Source 1. Press the button on the right side panel of the TV or the INPUT

button on the remote control to display the Input source list.

2. Press the buttons to select the input source that you want: DTV / ATV / AV / SCART / YPbPr / HDMI1 / HDMI2 / PC / USB.

3. Press the OK button to confirm your selection. If you do not press the OK button to confirm, the TV will automatically confirm the selected input source within 4 seconds.

Alternative Press the TV.RD button to switch to DTV / digital radio channels directly.

Channel Selection Press the CH + / buttons on the remote control repeatedly or the 0-9 buttons to select the channel.

Alternative Press the LIST button to enter the Channel List. Then use the buttons to highlight and select the channel. Press the OK button to view the selected channel.

If a blocked channel is selected, the password screen will be displayed. Press the 0-9 buttons to enter the password, the channel will then be unlocked (refer to page 44 for details on Block Channel).

Press the FAV button to view the Favourite List. Then use the buttons to highlight and select the channel. Press the OK button to view the selected channel (refer to page 25 for details on Channel Edit).

Press the button to return to the previously viewed channel.

Listening to the Radio (Radio Mode) In DTV mode, press the TV.RD button to switch between DTV and Digital radio channel.

Press the CH / buttons on the remote control repeatedly to change the radio stations.

Alternative Press the LIST button to enter the Channel List. Then use the buttons to highlight and select the station. Press the OK button to listen to the selected station.

Press the GUIDE button to see all the stations in the Programme Guide (refer to page 46 for details on EPG).

Display Channel Information Press the i button to view the current information.

Volume Adjustment Press the VOL + or button on the side panel of the TV or on the remote control to adjust the volume.

If you wish to switch the sound off, press the MUTE button. Press the MUTE button again or the VOL + button to resume audio listening.

Input Source

OK

DTV

ATV

AV

SCART

YPbPr

HDMI1

HDMI2

PC

USB

20

4 Initial Setup

GB Optimum Viewing The diagrams below demonstrate the optimum viewing angles for this TV.

Side View Top View

45 20

45

45

21

GB

5. Channel tuning will commence. This operation may take up to 6 minutes. The display will show the progress of the tuning and the number of channels found.

6. If you want to skip the DTV tuning, press the MENU button to interrupt the tuning half way. A pop-up screen will be displayed, press the button to select YES to confirm.

7. After tuning is complete, the channels are arranged in a preset order. If you wish to skip channels, modify the preset order or rename channels, select Channel Edit under the channel menu (refer to page 25 for details).

4. In the Tune Type menu, press the buttons to select DTV / ATV / ATV + DTV. Press the button and then press the buttons to select the country where you will operate the TV. Press the OK button to confirm.

3. Press the buttons to select DVB-T and then press the OK button to confirm.

2. Press the buttons to select Auto Tuning and then press the OK button.

Channel Setting (TV, DTV or Radio Mode)

Auto Tuning (DVB-T) Use this to automatically find and store all available channels. This is normally recommended if some channels have been added or removed by the broadcaster or if you have moved.

1. Press the MENU button and then press the buttons to select the CHANNEL menu and then press the OK button.

Channel Tuning

DTV : 3 Channel(s) Radio : 0 Channel(s) Data : 0 Channel(s)

36% UHF CH

Press [MENU] to skip.

(DTV)

CHANNEL PICTURE

SOUND

TIME

OPTION

LOCK

EXITEXIT

Auto Tuning DTV Manual Tuning ATV Manual Tuning

Signal Information CI Information Software Update

Channel EditCHANNEL

Tune Type DTV

Germany

Greece

Hungary

Italy

Ireland

Luxembourg

Netherlands

Norway

Poland

MENU

DVB-C

DVB Select type

DVB-T

5 Customising TV Settings Chapter

5

22

5 Customising TV Settings

GB

5. In the Tune Type menu, press the buttons to select DTV / ATV / ATV + DTV. Press the button and then press the buttons to select the country where you will operate the TV. Press the OK button to confirm.

6. Channel tuning will commence. This operation may take up to 6 minutes. The display will show the progress of the tuning and the number of channels found.

7. If you want to skip the ATV tuning, press the MENU button to interrupt the tuning half way. A pop-up screen will be displayed, press the button to select Yes to confirm. You will then go straight to DTV tuning. You may repeat the above step if you also want to skip the DTV tuning. An installation reminder will appear the next time you turn on the TV.

8. After tuning is complete, the channels are arranged in a preset order. If you wish to skip channels, modify the preset order or rename channels, select Channel Edit under the channel menu (refer to page 25 for details).

4. Press the buttons to select Scan type / Symbol(ks/s) and then press the OK button to confirm.

3. Press the buttons to select DVB-C and then press the OK button to confirm.

2. Press the buttons to select Auto Tuning and then press the OK button to confirm.

Channel Tuning

DTV : 3 Channel(s) Radio : 0 Channel(s) Data : 0 Channel(s)

36% UHF CH

Press [MENU] to skip.

(DTV)

CHANNEL PICTURE

SOUND

TIME

OPTION

LOCK

EXITEXIT

Auto Tuning CADTV Manual Tuning ATV Manual Tuning

Signal Information CI Information Software Update

Channel EditCHANNEL

Tune Type DTV

Germany

Greece

Hungary

Italy

Ireland

Luxembourg

Netherlands

Norway

Poland

MENU

Auto Tuning (DVB-C) Use this to automatically find and store all available channels. This is normally recommended if some channels have been added or removed by the broadcaster or if you have moved.

1. Press the MENU button and then press the buttons to select the CHANNEL menu and then press the OK button.

DVB-C

DVB Select type

DVB-T

DVB-C Scan Menu

Scan type Full

610000

Auto

Auto

Frequency

Network ID

Symbol(ks/s)

OK MENU

23

5Customising TV Settings

GB

3. The DTV Manual Tuning screen will pop up. Press the buttons to select the desired UHF channel and then press the OK button to commence the search of that channel. When the signal has been tuned, the picture and signal strength will be displayed on the screen.

4. Press the MENU button to return to the main menu.

5. Press the EXIT button to exit the menu.

2. Press the buttons to select DTV Manual Tuning and then press the OK button.

DTV Manual Tuning (DVB-T) Allows you to make manual fine tuning adjustments to the channel under DTV mode.

1. Press the MENU button and then press the buttons to select the CHANNEL menu and then press the OK button. CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

EXITEXIT

CHANNEL PICTURE

SOUND

TIME

OPTION

LOCK

EXITEXIT

Auto Tuning DTV Manual Tuning ATV Manual Tuning

Signal Information CI Information Software Update

Channel EditCHANNEL

DTV Manual Tuning

UHF CH 5

Bad Normal Good

Press [OK] to search

DTV Manual Tuning (DVB-C) Allows you to make manual fine tuning adjustments to the channel under DTV mode.

1. Press the MENU button and then press the buttons to select the CHANNEL menu and then press the OK button.

Auto Tuning CADTV Manual Tuning ATV Manual Tuning

Signal Information CI Information Software Update

Channel EditCHANNEL

2. Press the buttons to select CADTV Manual Tuning and then press the OK button.

24

5 Customising TV Settings

GB

2. Press the buttons to select ATV Manual Tuning and then press the OK button.

CHANNEL PICTURE

SOUND

TIME

OPTION

LOCK

EXITEXIT

Auto Tuning DTV Manual Tuning ATV Manual Tuning

Signal Information CI Information Software Update

Channel EditCHANNEL

ATV Manual Tuning Allows you to make manual fine tuning adjustments if the channel reception is poor under ATV mode.

1. Press the MENU button and then press the buttons to select the CHANNEL menu and then press the OK button.

3. The CADTV Manual Tuning screen will pop up. Press the buttons to select (Frequency / Symbol(ks/s) / QAM Type). Press the OK button to commence the search of that channel. When the signal has been tuned, the picture and signal strength will be displayed on the screen.

4. Press the MENU button to return to the main menu.

5. Press the EXIT button to exit the menu.

CADTV Manual Tuning

Frequency 610000

Bad Normal Good

Symbol(Ks/s) 6875

QAM Type QAM 64

3. The ATV Manual Tuning screen will pop up. Use the buttons to select the following options and the buttons to adjust the setting.

Storage To Presets the channel number.

System Selects the sound system: I / DK / BG / L (for SECAM).

Current CH Displays the current channel number.

Search Press the buttons to start the manual tuning.

Fine-Tune Press the buttons to make manual fine tuning adjustments.

Frequency Displays the current tuned frequency.

4. After finishing the manual tuning adjustment of a channel, press the RED button to save your channel before tuning the next channel.

5. Press the MENU button to return to the main menu.

6. Press the EXIT button to exit the menu.

ATV Manual Tuning

Storage To 1

System I

Current CH 1

Search

Fine-Tune

Frequency 255.25 MHz

Save MENU

25

5Customising TV Settings

GB Channel Edit (ATV / DTV Mode) Allows you to edit TV channel information in the Channel List.

1. Press the MENU button and then press the buttons to select the CHANNEL menu and then press the OK button.

a. Delete Press the RED button to delete the selected channel.

b. Rename (ATV channels)

Press the GREEN button to rename the selected channel. Press the buttons to select the characters to represent the station name. Press the buttons to move to the next character and then press the GREEN button again to confirm the new name.

c. Move DTV channels

Press the YELLOW button and then use the 0-9 buttons to input new channel number. Press the OK button to confi rm.

ATV channels Press the YELLOW button and then press the buttons to

move to the selected channel. Press the YELLOW button or the OK button to confi rm.

d. Skip Press the BLUE button to select the channels that you want to skip

when you are selecting channels. Press the BLUE button again to undo it.

e. FAV (Favourite)

Press the FAV button to set the selected channel as one of the favourite programmes. Press the FAV button again to undo it.

4. Press the MENU button to return to the main menu.

5. Press the EXIT button to exit the menu.

3. A Channel Edit screen will pop up. Press the buttons to select the programme you want to edit.

2. Press the buttons to select Channel Edit and then press the OK button.

CHANNEL PICTURE

SOUND

TIME

OPTION

LOCK

EXITEXIT

Auto Tuning DTV Manual Tuning ATV Manual Tuning

Signal Information CI Information Software Update

Channel EditCHANNEL

Channel Edit

OK

Delete Rename Move Skip FAV

MENU

800 SZTVM01 DTV

800 SZTVM02

800 SZTVM03

800 SZTVM04 804 Date

1C-51

2C-53

3C-61

DTV

DTV

DTV

DTV

ATV

ATV

ATV

All channels (DTV and ATV) are listed, please ensure that you edit the correct channel.

Care should be taken when editing the position of digital channels as this may affect EPG and reminder settings.

26

5 Customising TV Settings

GB

2. Press the buttons to select Signal Information and then press the OK button to view the signal information.

3. Press the BACK button to return to the previous menu or press the MENU button to return to the main menu.

4. Press the EXIT button to exit the menu.

Signal Information (DTV Mode) (DVB-T) Allows you to view the signal information.

1. Press the MENU button and then press the buttons to select the CHANNEL menu and then press the OK button. CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

EXITEXIT

CHANNEL PICTURE

SOUND

TIME

OPTION

LOCK

EXITEXIT

Auto Tuning DTV Manual Tuning ATV Manual Tuning

Signal Information CI Information Software Update

Channel EditCHANNEL

Auto Tuning CADTV Manual Tuning ATV Manual Tuning

Signal Information CI Information Software Update

Channel EditCHANNEL

Channel 52

Network SZTVM

Modulation 16QAM

Quality 99

Signal Information

Strength 81

Frequency 474MHz

Network SZTVM

Modulation 16QAM

Quality 99

Signal Information

Strength 81

2. Press the buttons to select Signal Information and then press the OK button to view the signal information.

Signal Information (DTV Mode) (DVB-C) Allows you to view the signal information.

1. Press the MENU button and then press the buttons to select the CHANNEL menu and then press the OK button.

3. Press the BACK button to return to the previous menu or press the MENU button to return to the main menu.

4. Press the EXIT button to exit the menu.

27

5Customising TV Settings

GB

3. A CI Information Main menu will pop up. Press the buttons to display the module information, smart card information, language, software download. Press the OK button to confirm.

4. Press the EXIT button to return to the previous menu. Press the EXIT button again to exit the menu.

This feature is not available in all countries.

To insert the Common Access Module 1. Before you insert the Common Access Module, ensure that the TV is

switched off and the viewing card is inserted in accordance with the Service Providers instructions.

2. Insert the Common Access Module into the slot. Flip the Common Access Module to another side and try again if you feel resistance.

3. Switch the TV on.

To remove the Common Access Module 1. Before you remove the Common Access Module, ensure that the TV is

switched off.

2. Pull the Common Access Module from the slot.

3. Switch the TV on.

To view the module information 1. Press the MENU button and then press the buttons to select the

CHANNEL menu and then press the OK button.

2. Press the buttons to select CI Information and then press the OK button.

CI (Common Interface) (DTV Mode) The common interface allows the use of a Common Access Module to enable you to view scrambled (pay to view) services. These services are provided by TopUp TV (UK only) and others. The Common Access Module and viewing card can be obtained from the service provider.

Rear Right Side View of TV

USB

5V 500mA

HDMI2 HDMI1(ARC) PC IN RFCOMMON INTERFACE (CI)

HEADPHONE PC AUDIO

CI (Common Interface) Allows the Common Access Module to be inserted and access the content that has been encrypted.

Common Access Module

CHANNEL PICTURE

SOUND

TIME

OPTION

LOCK

EXITEXIT

Auto Tuning DTV Manual Tuning ATV Manual Tuning

Signal Information CI Information Software Update

Channel EditCHANNEL

Main menu

Press Ok to select,or Exit to quit

CI Information

Module information Smart card information Language

Software Download

Do not repeatedly insert or remove the Common Access Module as this may damage the interface and cause a malfunction.

This screen is for illustration only.

28

5 Customising TV Settings

GB

4. Press the BACK button to return to the previous menu or press the MENU button to return to the main menu.

5. Press the EXIT button to exit the menu.

6. During normal DTV viewing, if the TV detects the latest firmware from the DTV signal, the Over Air Download screen will appear. Press the buttons to select Yes / No for the upgrade procedure.

7. If you select Yes, the over air download will start. Press the EXIT button if you want to stop the download and exit the menu.

3. Press the buttons to select Software Update(OAD) and then press the OK button to select On.

Software Update (USB) Occasionally there may be a need to issue a new version of the software for your TV. This can be installed using a USB Thumb Drive. To check for the availability of new software and to download the file, please click on the link for Support Centre: Norway: www.elkjop.no/service Sweden: www.elgiganten.se/service Denmark: www.elgiganten.dk/service Finland: www.gigantti.fi/huolto

Software Update (Over Air Download) (DVB-T) The TV auto detects the latest firmware through the DTV signal and allows you to accept or refuse the firmware upgrade service. This function may not be available in some countries. Please follow the steps below if applicable.

1. Press the MENU button and then press the buttons to select the CHANNEL menu and then press the OK button.

2. Press the buttons to select Software Update and then press the OK button to confirm.

CHANNEL PICTURE

SOUND

TIME

OPTION

LOCK

EXITEXIT

Auto Tuning DTV Manual Tuning ATV Manual Tuning

Signal Information CI Information Software Update

Channel EditCHANNEL

Software Update (OAD) Off

CHANNEL

OAD Tuning

Software Update (USB)

Yes No

New FW is available for upgrading TV Version V0.01

Stream Version v0.03

Yes to upgrade. No to ignore this upgrade.

EXIT

Download

20%

The TV will auto detect the latest firmware through the DTV signal when you switch the TV on or off each time.

To save energy, you should always turn the Software Update(OAD) function back to "OFF".

During download, please do not turn off or unplug your TV.

29

5Customising TV Settings

GB

2. Press the buttons to select Software Update and then press the OK button to confirm.

OAD Tuning (DVB-T) The TV searches the latest firmware through the DTV signal and allows you to accept or refuse the firmware upgrade service. This function may not be available in some countries. Please follow the steps below if applicable.

1. Press the MENU button and then press the buttons to select the CHANNEL menu and then press the OK button.

8. When the download is complete, the TV will automatically upgrade the software.

9. When the update is complete, the TV will return to standby mode.

10. Press the button on the right side panel of the TV or on the remote control to switch on the TV.

Software Update(OAD)

71%

CHANNEL PICTURE

SOUND

TIME

OPTION

LOCK

EXITEXIT

Auto Tuning DTV Manual Tuning ATV Manual Tuning

Signal Information CI Information Software Update

Channel EditCHANNEL

Software Update (USB) Software Update (OAD) On OAD Tuning

CHANNEL

51% CH D11

OAD Tuning

3. Press the buttons to select OAD Tuning and then press the OK button to confirm.

4. OAD Tuning will commence. The display will show the progress of the tuning.

If you encounter problems after the software update, we recommend that you restore your TV to the factory default settings. To do this, follow the steps below: 1. Press the MENU button to go to the MAIN menu. Press the buttons to select OPTION and then press the OK

button.

2. Press the buttons to select Restore Factory Default and then press the OK button. Press the button to select Yes to reset the setting.

3. The TV will restore all settings and go to the First Time Installation. Follow the First Time Installation steps (refer to page 17-19 for details).

Ensure the Software Update(OAD) function is switched to "ON".

30

5 Customising TV Settings

GB

2. Press the buttons to select the following picture options and then press the OK button.

7. When the download is complete, the TV will automatically upgrade the software.

8. When the update is complete, the TV will return to standby mode.

9. Press the button on the right side panel of the TV or on the remote control to switch on the TV.

6. If you select Yes, the over air download will start. Press the EXIT button if you want to stop the download and exit the menu.

CHANNEL

PICTURE SOUND

TIME

OPTION

LOCK

EXITEXIT

Picture Mode Colour Temperature Aspect Ratio Noise Reduction Middle Screen Backlight

Standard Medium Auto

6

PICTURE

5. If the TV detects the latest firmware, the Over Air Download screen will appear. Press the buttons to select Yes / No for the upgrade procedure.

EXIT

Download

20%

Software Update(OAD)

71%

Yes No

New FW is available for upgrading TV Version V0.01

Stream Version v0.03

Yes to upgrade. No to ignore this upgrade.

Picture Setting

Allows you to set your preferred picture mode.

1. Press the MENU button and then press the buttons to select the PICTURE menu and then press the OK button.

During download, please do not turn off or unplug your TV.

If you encounter problems after the software update, we recommend that you restore your TV to the factory default settings. To do this, follow the steps below: 1. Press the MENU button to go to the MAIN menu. Press the buttons to select OPTION and then press the OK

button.

2. Press the buttons to select Restore Factory Default and then press the OK button. Press the button to select Yes to reset the setting.

3. The TV will restore all settings and go to the First Time Installation. Follow the First Time Installation steps (refer to page 17-19 for details).

31

5Customising TV Settings

GB 3. Press the buttons to select the options. Press the OK button and then press the buttons to adjust each options

setting.

Picture Mode Select among picture mode: Standard / Mild / User / Dynamic.

Alternative You may press the P.MODE button to select the picture mode directly.

Contrast Adjusts the difference between light and dark levels in the picture (for User mode). Picture Mode Standard

Contrast 82 Brightness 50

Colour 50 Sharpness 50

Tint 50

BACK MENUEXIT

Brightness Increases or decreases the amount of white in the picture (for User mode).

Colour Controls the colour intensity (for User mode).

Sharpness Adjusts the level of crispness in the edges between light and dark areas of the picture (for User mode).

Tint (For NTSC format)

Adjusts the balance between red and green levels (Tint is only available for NTSC signal reception).

Colour Temperature

Select among colour temperature: Medium / Cool / User / Warm. Adjusts the colour components independently to achieve a warm or cool colour (for User mode). Red: Increases red tint Green: Increases green tint Blue: Increases blue tint

Colour Temperature Medium

Red 40 Green 31

Blue 50

BACK MENUEXIT

Aspect Ratio Allows you to watch the screen in various picture formats: Auto / 4:3 / 16:9 / Zoom / Subtitle / SmartZoom.

Alternative You may press the ASPECT button to select the aspect ratio directly.

Input Signal 4:3 Input Signal 16:9

Auto This selection will display the picture according to the aspect ratio of the input source. Black bars will appear on both the left and right of the screen.

This selection will display the picture according to the aspect ratio of the input source.

4:3 This selection will allow you to view a picture with an original 4:3 aspect ratio. Black bars will appear on both the left and right of the screen.

This selection will allow you to adjust the picture vertically, in linear proportion. Black bars will appear on both the left and right of the screen.

16:9 This selection will allow you to adjust the picture horizontally, in linear proportion, to fill the entire screen.

This selection will allow you to view a picture with an original 16:9 aspect ratio.

Zoom This selection will allow you to zoom in the picture without any alteration, while filling the entire screen. However, the top and bottom of the picture will be cropped.

This selection will allow you to zoom in the picture without any alteration, while the 4 sides of the picture will be cropped.

32

5 Customising TV Settings

GB Subtitle This selection will allow

you to zoom in the picture without any alternation, while filling the entire screen with subtitles shown at the bottom of the screen.

This selection will allow you to zoom in the picture without any alternation, while showing subtitles at the bottom of the screen.

Smart Zoom This selection is similar to 16:9 mode, but the picture slightly stretches horizontally and clips off a little from the top and bottom.

This selection is similar to 4:3 mode, but the picture slightly stretches vertically and clips off a little from the top and bottom.

Noise Reduction Select to reduce the noise level of the connected device: Off / Low / Middle / High.

Screen Allows you to adjust the PC desktop content. (PC mode only)

Auto Adjust Allows you to synchronise a PC signal automatically. Screen

Auto Adjust Horizontal Pos. 50

Vertical Pos. 50 Size 50

Phase 38

BACK MENUEXIT

Horizontal Pos. Adjusts the position of the picture left and right in the window.

Vertical Pos. Adjusts the position of the picture up and down in the window.

Size Allows you to adjust the picture horizontally, in linear proportion.

Phase Controls the signal phase, which can improve focus clarity and image stability based on the PC mode.

Backlight Allows you to adjust the backlight setting of your TV. This controls the brightness and display performance of the screen. The default setting for Home Mode is 6 and Shop Mode is 10.

Increasing the backlight setting will increase the brightness and display performance of the screen. The higher the setting is, the higher the power consumption. You can select from 1-10 to strike a balance between the picture brightness / display performance / power consumption. Reducing the backlight setting will help you reduce power consumption and thus save money by reducing electricity bills.

Backlight 6

BACK MENUEXIT

+

4. Press the BACK button to return to the previous menu or press the MENU button to return to the main menu.

5. Press the EXIT button to exit the menu.

33

5Customising TV Settings

GB Sound Setting

Allows you to select an audio-enhancement technique.

1. Press the MENU button and then press the buttons to select the SOUND menu and then press the OK button. CHANNEL

PICTURE

SOUND TIME

OPTION

LOCK

EXITEXIT

2. Press the buttons to select the following sound options and then press the OK button.

Sound Mode Balance Auto Volume

AD Switch SPDIF Mode

Standard 0 On

Surround Sound On Off Auto

SOUND

3. Press the buttons to select the options. Press the OK button and then press the buttons to adjust each options setting.

Sound Mode Allows the selection of an audio-enhancement technique: Standard / Music / Movie / Sports / User.

Alternative You may press the S.MODE button to select the sound mode directly.

Treble Controls the relative intensity of higher pitched sounds (for User mode).

Bass Controls the relative intensity of lower-pitched sounds (for User mode).

Balance Adjusts the relative volume of the speakers in a multiple speaker system.

Surround Sound Select to turn Surround Sound On / Off.

Auto Volume Volume levels are automatically controlled (e.g., advertisements tend to be louder than the programmes).

AD Switch (for DTV mode)

Audio Description is an auxiliary audio function that provides an additional audio track for visually challenged persons. This function handles the Audio Stream for the AD (Audio Description), when it is sent along with the main audio from the broadcaster. Set to Off for normal broadcasting sound coming out from speakers. Set to On to activate the description sound track if available. The availability of Audio Description

sound track is indicated by the visually impaired icon "V.I." in the information banner.

SPDIF Mode Selects the digital audio output mode. Press the OK button to select PCM / Auto.

4. Press the BACK button to return to the previous menu or press the MENU button to return to the main menu.

5. Press the EXIT button to exit the menu.

Stereo / Dual Sound Reception (ATV Mode) When a programme is selected, press the AUDIO button to display the sound information for the selected station.

Broadcast On Screen Display Mono

Stereo

Dual

MONO / NICAM MONO

MONO / NICAM STEREO

MONO / NICAM DUAL I, NICAM DUAL II, NICAM DUAL I+II

34

5 Customising TV Settings

GB

Time Settings

Allows you to adjust power on / off time, sleep timer, auto standby and time zone.

1. Press the MENU button and then press the buttons to select the TIME menu and then press the OK button. CHANNEL

PICTURE

SOUND

TIME OPTION

LOCK

EXITEXIT

2. Press the buttons to select the following time options and then press the OK button.

Clock Off Time On Time Sleep Timer Auto Standby (4 hours) Time Zone

10 Mar 2013 15:01 Off Off Off On London GMT

TIME

Audio Language

OK

English L R

Norsk L RV.I.

Mono sound selection If the stereo signal is weak, you can switch to mono by pressing the AUDIO button. In mono reception, the clarity of sound is improved. To switch back to stereo, press the AUDIO button again.

Language selection for dual language broadcast If a programme can be received in two languages (dual language), you can switch to NICAM DUAL I, NICAM DUAL II, NICAM DUAL I+II or MONO by pressing the AUDIO button repeatedly.

NICAM DUAL I Sends the primary broadcast language to the loudspeakers

NICAM DUAL II Sends the secondary broadcast language to the loudspeakers

NICAM DUAL I+II Sends the primary and secondary broadcast languages to the loudspeakers

Speaker Sound Output Selection (DTV Mode) While watching a DTV programme, you can press the AUDIO button to display the audio language list (only applicable when the TV programme has this feature).

Press the buttons to select an audio language or audio format if available and then press the buttons to select sound track between L/R (Stereo), L/L (Mono Left) and R/R (Mono Right). Press the OK button to confirm and exit.

35

5Customising TV Settings

GB 3. Press the buttons to select the options. Press the OK button and then press the buttons to adjust each options

setting.

Clock The clock is set automatically when receiving a digital signal.

Off Time Allows you to set the off time that will automatically switch off the TV. Select from the following off time options: Off / Once / Every Day / Mon.~Fri. / Mon.~Sat. / Sat.~Sun. / Sunday.

On Time Allows you to set the on time that will automatically switch on the TV and tune to the source, channel and volume you select. Select from the following on time options: Off / Once / Every Day / Mon.~Fri. / Mon.~Sat. / Sat.~Sun. / Sunday.

Ensure your SCART device is turned off before entering the On Time menu. If your SCART device is turned on, the On Time menu will default to the SCART device.

Sleep Timer The sleep timer automatically switches the TV to standby after the preset time has elapsed. The clock will be set automatically when receiving a digital signal. Time must be set before using Sleep Timer function.

Press the buttons to select a period of time after which the TV automatically switches to standby mode: OFF / 10 / 20 / / 180 / 240 min. The timer begins to count down from the number of minutes selected.

If you turn the TV off after setting the sleep timer, the sleep timer setting will be erased.

Alternative 1. You may press the SLEEP button repeatedly to select the number of

minutes: OFF / 10 / 20 / / 180 / 240 min directly.

2. To cancel the sleep time, press the SLEEP button repeatedly until Off appears.

Auto Standby The unit will automatically switch to standby mode 4 hours after the last time the remote control was used. A reminder screen will pop up and count down before the unit switches to standby mode. To turn off the auto standby function, press the MENU button to display the main menu. Press the

buttons to select the TIME option and then press the OK button. Press the buttons to select the Auto Standby option and then press the OK button to select "Off". Press the EXIT button to exit the main menu. To save energy you should always turn the auto standby function back to "ON".

Time Zone When you select a Time Zone city, the TV time is set by the time offset information based on Time Zone and GMT (Greenwich Mean Time) which is received with the broadcast signal and the time is set automatically by a digital signal.

4. Press the BACK button to return to the previous menu or press the MENU button to return to the main menu.

5. Press the EXIT button to exit the menu.

OK

The unit will automatically switch to standby

mode in 5 minutes.

Press the OK button to continue viewing.

36

5 Customising TV Settings

GB Option Setting

OSD Language Allows you to select your desired on screen menu language.

1. Press the MENU button and then press the buttons to select the OPTION menu and then press the OK button. CHANNEL

PICTURE

SOUND

TIME

OPTION LOCK

EXITEXIT

2. Press the buttons to select OSD Language and then press the OK button. The default on-screen menu language is English.

Hearing Impaired

PVR File System Restore Factory Default HDMI CEC

OSD Language Audio Language

Country

Subtitle Language On

Off HDMI ARC Off

English English

UK

English

OPTION

3. Press the buttons to navigate the menu and change the settings. Press the OK button to confirm.

4. Press the BACK button to return to the previous menu or press the MENU button to return to the main menu.

5. Press the EXIT button to exit the menu.

OSD Language

BACK MENUEXIT

English

Svenska

Dansk

esky

Slovak

Suomi

Norsk

Audio Language (DTV Mode) Allows you to select your desired audio language. (Available for digital channels if multiple audio languages are broadcast.)

1. Press the MENU button and then press the buttons to select the OPTION menu and then press the OK button. CHANNEL

PICTURE

SOUND

TIME

OPTION LOCK

EXITEXIT

2. Press the buttons to select Audio Language and then press the OK button. The default audio language is English.

Hearing Impaired

PVR File System Restore Factory Default HDMI CEC

OSD Language Audio Language

Country

Subtitle Language On

Off HDMI ARC Off

English English

UK

English

OPTION

37

5Customising TV Settings

GB 3. Press the buttons to select the Primary / Secondary Audio Language.

Press the button and then press the buttons to select your desired audio language. Press the OK button to confirm.

4. Press the BACK button to return to the previous menu or press the MENU button to return to the main menu.

5. Press the EXIT button to exit the menu.

Audio Language Primary

BACK MENUEXIT

English

Svenska

Dansk

esky

Slovak

Suomi

Norsk

CHANNEL

PICTURE

SOUND

TIME

OPTION LOCK

EXITEXIT

Subtitle Language (DTV Mode) Allows you to select your desired subtitle language or turn off the subtitle. (Available for digital channels if multiple subtitle languages are broadcast.)

1. Press the MENU button and then press the buttons to select the OPTION menu and then press the OK button.

2. Press the buttons to select Subtitle Language and then press the OK button. The default subtitle language is English.

Hearing Impaired

PVR File System Restore Factory Default HDMI CEC

OSD Language Audio Language

Country

Subtitle Language On

Off HDMI ARC Off

English English

UK

English

OPTION

Subtitle Language Primary

BACK MENUEXIT

English

Svenska

Dansk

esky

Slovak

Suomi

Norsk

3. Press the buttons to select the Primary / Secondary Subtitle Language. Press the button and then press the buttons to select your desired subtitle language. Press the OK button to confirm.

4. Press the BACK button to return to the previous menu or press the MENU button to return to the main menu.

5. Press the EXIT button to exit the menu.

While watching a DTV programme, you can press the S button on the remote control to display the Subtitle Language List and then press the buttons to select the Subtitle Language OFF. Press the OK button to confirm. (Only applicable when the TV programme has this feature.)

38

5 Customising TV Settings

GB

2. Press the buttons to select Hearing Impaired and then press the OK button to select On / Off.

3. Press the BACK button to return to the previous menu or press the MENU button to return to the main menu.

4. Press the EXIT button to exit the menu.

Hearing Impaired

PVR File System Restore Factory Default HDMI CEC

OSD Language Audio Language

Country

Subtitle Language On

Off HDMI ARC Off

English English

UK

English

OPTION

Country This shows the country you selected in auto tuning. If you want to change the country, please refer to Auto Tuning on page 21-22.

PVR File System (DTV Mode) Allows you to select your preferences in the PVR File System.

1. Press the MENU button and then press the buttons to select the OPTION menu and then press the OK button. CHANNEL

PICTURE

SOUND

TIME

OPTION LOCK

EXITEXIT

Hearing Impaired

PVR File System Restore Factory Default HDMI CEC

OSD Language Audio Language

Country

Subtitle Language On

Off HDMI ARC Off

English English

UK

English

OPTION

2. Press the buttons to select PVR File System and then press the OK button.

Hearing Impaired Shows information for the hearing-impaired in some programmes. (For DTV channels only if available.)

1. Press the MENU button and then press the buttons to select the OPTION menu and then press the OK button. CHANNEL

PICTURE

SOUND

TIME

OPTION LOCK

EXITEXIT

39

5Customising TV Settings

GB 3. Press the buttons to select the following PVR File System options

and then press the OK button.

Select Disk Select the disk where you want to store your recorded content.

Check PVR File System

Press the OK button, the system will now check your USB device's suitability for PVR. The system will show "Checking". Upon completion, the system will show either "SUCCESS" or "FAIL".

USB Disk If no USB storage device is connected, it will show "No USB Disk". If the Check PVR File System has a "SUCCESS" it will show "Pass".

Format Press the OK button, a File System Size menu will pop-up. Press the buttons to select your preferred file type between FAT32 and HiSpeed FS. If you select HiSpeed FS, press the button and then press the buttons to select your preferred file size. Press the OK button to confirm and then press the button to start formatting.

Format disk

Format disk

Warning! All data will be lost.

Start Exit

File System Size

PVR File System Type

PVR File System Size

Duration 104 Mins

FAT32

All

MENU

Format disk

Do not unplug USB device.

Formatting,Please wait

Time Shift Size After formatting the Time Shift Size menu will appear if you have selected HiSpeed FS in PVR File System Type. Press the buttons to select your preferred file size. Press the OK button to confirm. This option cannot be chosen if you have selected FAT32 in PVR File System Type.

Speed This shows the transfer rate of your USB storage device.

Free Record Limit Press the buttons to set the recording time limit from 1-4 hours per recording.

Restore Factory Default Restores all settings to the factory defaults.

1. Press the MENU button and then press the buttons to select the OPTION menu and then press the OK button.

Check PVR File System

USB Disk

Select Disk

Format

Time Shift Size

Speed

Free Record Limit

Start

C:

6 Hr.

Check PVR File System

USB Disk

Select Disk

Format

Time Shift Size

Speed

Free Record Limit

SUCCESS

Pass

Pass

All

2048 KB/sHD support

C:

6 Hr.

Time Shift Size

Time Shift Disk Size

Duration 84 Mins

3GB

CHANNEL

PICTURE

SOUND

TIME

OPTION LOCK

EXITEXIT

40

5 Customising TV Settings

GB

3. Press the button to select Yes. The TV will turn off and restart after a few seconds. Press the button to select "No" to cancel and return to the main menu.

1. Press the MENU button and then press the buttons to select the OPTION menu and then press the OK button.

HDMI CEC (Consumer Electronics Control) Allows you to command and control two or more CEC-enabled devices, that are connected through HDMI, by using only one of the remote controls (e.g. controlling a TV set, set-top box and DVD player using only the remote control of the TV). CEC also allows individual CEC-enabled devices to command and control each other without user intervention.

Make sure that your CEC-compliant device is connected to your TV using a HDMI cable and the correct HDMI input source is selected prior to using this function. (Some HDMI cables may not support HDMI-CEC functions.)

HDMI-CEC Connection

2. Press the buttons to select Restore Factory Default and then press the OK button.

Hearing Impaired

PVR File System Restore Factory Default HDMI CEC

OSD Language Audio Language

Country

Subtitle Language On

Off HDMI ARC Off

English English

UK

English

OPTION

CHANNEL

PICTURE

SOUND

TIME

OPTION LOCK

EXITEXIT

TV

HDMI-CEC compliant device

HDMI Cable (not included)

Yes No

Are you sure?

2. Press the buttons to select HDMI CEC and then press the OK button to select On / Off.

3. Press the BACK button to return to the previous menu or press the MENU button to return to the main menu.

4. Press the EXIT button to exit the menu.

Hearing Impaired

PVR File System Restore Factory Default HDMI CEC

OSD Language Audio Language

Country

Subtitle Language On

Off HDMI ARC Off

English English

UK

English

OPTION

All channel and user settings will be lost and the TV will revert to "First Time Installation".

This unit can only communicate with HDMI-CEC compatible devices.

To be sure that the HDMI-CEC device has this feature, check to see if there is HDMI-CEC compatible logo on it.

HDMI-CEC function only works when the AV device supporting CEC is turned on.

41

5Customising TV Settings

GB

2. Press the buttons to select HDMI ARC and then press the OK button to select On / Off.

3. Press the BACK button to return to the previous menu or press the MENU button to return to the main menu.

4. Press the EXIT button to exit the menu.

Hearing Impaired

PVR File System Restore Factory Default HDMI CEC

OSD Language Audio Language

Country

Subtitle Language On

On HDMI ARC Off

English English

UK

English

OPTION

CHANNEL

PICTURE

SOUND

TIME

OPTION LOCK

EXITEXIT

HDMI ARC (Audio Return Channel) The ARC (Audio Return Channel) function allows you to send audio signals from your ARC-compliant TV to ARC-compliant audio devices (e.g. home theatre) through a single HDMI connection.

HDMI-ARC Connection To enjoy the ARC function, please ensure your ARC-compliant audio devices are connected by an HDMI cable that support ARC function to the HDMI 1(ARC) port of your ARC-compliant TV. When correctly set up, you can use your TV remote control to adjust the volume output (VOL +/ and MUTE) of the connected audio device.

TV HDMI-ARC compliant device

HDMI port with ARC Function

HDMI Cable (not included)

HDMI 1(ARC)

1. Press the MENU button and then press the buttons to select the OPTION menu and then press the OK button.

Ensure the audio device supports the ARC function and is connected to the correct HDMI input source.

Ensure to use HDMI cable that can support the ARC function.

The HDMI ARC only works on the HDMI 1 input on the TV.

If the ARC-compliant audio devices do not support sound output from TV, such as Dolby Digital or Dolby Digital Plus, then ARC function will not work and there will be no sound output from ARC-compliant audio devices. In this case, please set SPDIF MODE to PCM.

Please refer to your ARC-compliant devices' guidebook for more details on the operation of the HDMI ARC function.

Ensure HDMI CEC is On.

42

5 Customising TV Settings

GB

4. Press the buttons to select Lock System and then the OK button to select On / Off. If the Lock System is set to On, a valid password must be entered when you access Auto Tuning / Manual Tuning / Restore Factory Default.

5. Press the BACK button to return to the previous menu or press the MENU button to return to the main menu.

6. Press the EXIT button to exit the menu.

Lock Setting

To access the LOCK menu, you must enter the password. Enter the default password 6666 for first time use. To change the password, refer to Set Password (see below).

Lock System The Lock System is designed to prevent accidental re-tuning of the TV / losing of channels and to prevent children from watching unsuitable programmes.

The Lock System must be set to On for this function to operate. If the Lock System is set to On, a valid password must be entered when you access Auto Tuning / Manual Tuning / Restore Factory Default.

1. Press the MENU button and then press the buttons to select the LOCK menu and then press the OK button. CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK EXITEXIT

2. Press the OK button to select Lock System.

Lock System Set Password Block Channel Parental Guidance OffLOCK

3. Use the 0-9 buttons to input a 4-digit password to enter the LOCK menu.

Clear Cancel

Please enter password

The default password is 6666.

If you change the password, be sure to remember the new password! If you forget the new password, enter the master password9527.

43

5Customising TV Settings

GB

The default password is 6666.

If you change the password, be sure to remember the new password! If you forget the new password, enter the master password9527.

Set Password

1. Press the MENU button and then press the buttons to select the LOCK menu and then press the OK button. CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK EXITEXIT

4. Press the buttons to select Set Password and then press the OK button.

Lock System Set Password Block Channel Parental Guidance OffLOCK

6. Press the button to return to the previous menu. Press the MENU button to return to the main menu.

7. Press the EXIT button to exit the menu.

5. Use the 0-9 buttons to input the old password and then input the new 4-digit password. Re-enter new password for confirmation.

Confirm new password

Please enter new password

Please enter old password

3. Use the 0-9 buttons to input a 4-digit password to enter the LOCK menu.

Lock System Set Password Block Channel Parental Guidance OffLOCK

Clear Cancel

Please enter password

2. Press the OK button to select Lock System.

The default password is 6666.

If you change the password, be sure to remember the new password! If you forget the new password, enter the master password9527.

44

5 Customising TV Settings

GB

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK EXITEXIT

3. Use the 0-9 buttons to input a 4-digit password to enter the LOCK menu.

2. Press the OK button to select Lock System.

Lock System Set Password Block Channel Parental Guidance OffLOCK

Clear Cancel

Please enter password

Lock System Set Password Block Channel Parental Guidance OffLOCK

5. A Block Channel screen will pop up. Press the buttons to select a channel. Press the GREEN button on the remote control to block or unblock the channel. Press the GREEN button again to unblock.

6. Press the MENU button once to return to the previous menu. Press the MENU button again to return to the main menu.

7. Press the EXIT button to exit the menu.

Block Channel

OK

Lock

MENU

800 SZTVM01 DTV

800 SZTVM02

800 SZTVM03

800 SZTVM04 804 Date

1C-51

2C-53

3C-61

DTV

DTV

DTV

DTV

ATV

ATV

ATV

4. Press the buttons to select Block Channel and then press the OK button.

Block Channel Block Channel is designed to prevent children from watching unsuitable programmes.

When a channel is blocked, a valid password must be entered.

1. Press the MENU button and then press the buttons to select the LOCK menu and then press the OK button.

The default password is 6666.

If you change the password, be sure to remember the new password! If you forget the new password, enter the master password9527.

45

5Customising TV Settings

GB Parental Guidance This function allows you to set up blocking schemes to block specific channels and ratings. It operates according to information from the broadcasting station, therefore if the signal has incorrect information, this function will not operate.

This TV is programmed to remember the last option set even if the TV is switched off.

When a programme is locked or rated, a valid password must be entered.

1. Press the MENU button and then press the buttons to select the LOCK menu and then press the OK button. CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK EXITEXIT

The default password is 6666.

If you change the password, be sure to remember the new password! If you forget the new password, enter the master password9527.

4. Press the buttons to select Parental Guidance and then press the OK button.

Lock System Set Password Block Channel Parental Guidance OffLOCK

5. Press the buttons to select an age rating: Off, 4-18. Then press the OK button to confirm.

6. Press the BACK button to return to the previous menu or press the MENU button to return to the main menu.

7. Press the EXIT button to exit the menu.

Parental Guidance

Off 4

5 6

7

8 BACK MENUEXIT

3. Use the 0-9 buttons to input a 4-digit password to enter the LOCK menu.

Lock System Set Password Block Channel Parental Guidance OffLOCK

Clear Cancel

Please enter password

2. Press the OK button to select Lock System.

46

GB EPG (Electronic Programme Guide) (DTV or Radio Mode)

This system has an Electronic Programme Guide (EPG) to help you navigate through all the possible viewing options.

The EPG supplies information such as programme listings, start and end times for all available services. In addition, detailed information about the programme is often available in the EPG (the availability and amount of programme information will vary, depending on the particular broadcaster).

This function can be used only when the EPG information is broadcast by broadcasting companies.

The EPG displays the programme details for the next 7 days.

Switch On / Off EPG 1. Press the GUIDE button to switch on EPG.

2. Press the GUIDE button or the EXIT button again to switch off EPG and return to normal TV viewing.

Select a Programme Press the buttons to select the desired channel and then press the buttons to select the desired programme. Press the OK button to confirm.

Button Functions in a 7-Day Guide Remote Control Button Function

RED (Record) (DTV mode only)

Timer Programming See page 55 for details on Timer Programming. Press the RED button in the Schedule list to delete the selected preset reminder.

GREEN (Schedule)

Press the GREEN button to view the preset reminders or scheduled recordings in the Schedule list. Press the GREEN button again to return to the EPG.

YELLOW (Date) Press the YELLOW button and then press the buttons to view the schedule of the previous / next day. Press the YELLOW button again to return to the EPG.

BLUE (Remind)

Press the BLUE button while on the selected programme, the Reminder setting menu will be displayed. Press the buttons to adjust the settings and then press the OK button to confirm the settings. After confirmation, the Schedule list will then be displayed with your preset reminders shown. Press the GREEN button to return to the EPG. The TV wzill automatically tune to the selected programme when it starts.

i Press to display detailed information of the selected programme (if available).

or Press to select a channel.

or Press to select a programme.

OK Press to confirm and view the selected channel. GUIDE / EXIT Press to switch off the EPG.

Schedule list 19:31 29th Dec Delete

Time Date Programme Title Channel Name

Return

802 SZTVM03

08 Minute 05 Hour

Apr Month

28 Date Once Mode

Reminder setting

BACKOK

_ +

6 Using the Features Chapter

6

EXIT Info ScheduleRecord Date Reminder OK

800 France 2 801 France 4 802 France 5 803 ARTE 804 LCP 805 France 3

Information Movie 1 Programme 2 Programme 3 Programme 4 Programme 5

DTV 17 Jan

17:0016:00

PROGRAMME GUIDE 17 Jan 2011 22:07 15:55-16:25 Movie 1

801 SZTVM02 current date and time

current channel number and name current programme title

programme date programme time

programme information

channel no.

current mode (DTV / Radio / Data)

channel name

47

6Using the Features

GB Teletext (ATV Mode)

Teletext is a free service broadcast by some TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics. Use the Teletext control buttons to view pages of information that are listed in the teletext index.

To Turn on Teletext Function

In ATV mode, press the TEXT button to enter Teletext mode. Press the INDEX button to display the index page.

Press the TEXT button once to exit and the TV will return to the channel you were watching.

To select a page of text Find the number of the page in the index and enter it using the 0-9 buttons. The number of the page will appear on the top left corner of the screen. The page counter will search for your page. When it finds it, the page will be displayed. To move to the next page of text, press the CH + button. To move to the previous page, press the CH button. To return to the index page, press the INDEX button.

Mix Press the TEXT button to display the teletext page and then press the MIX button. The text will be superimposed over the TV programme.

Press the MIX button again to return to the text page.

Double height text If you have difficulty reading the text on the TV you can double the height of the text. Press the SIZE button. The top half of the page will be displayed in double height text. Press the SIZE button again. The bottom half of the page will be displayed in double height text. Press the SIZE button again to return to the full page.

Page STOP If the page of text you have selected contains subpages, these subpages will automatically be displayed in order with a delay to allow you to have enough time to read the page. Press the HOLD button. will appear on the top left corner of the screen. While the page is on-hold, press the buttons to scroll through the subpages in your own time. Alternatively, press the SUB.PAGE button, use the colour buttons to scroll through the subpages.

To Reveal Information Press the REVEAL button to reveal concealed information (quiz answers etc.). Press the REVEAL button again to conceal the information again.

Fasttext At the bottom of the teletext screen is a row of subject headings in red, green, yellow and blue. The remote control has a row of colour buttons corresponding to the row of coloured subjects on the screen. Pressing one of the colour buttons will take you directly to the page corresponding to the subject heading.

Make sure the TV channel you are watching transmits teletext. No Teletext sign will show on the screen if teletext is not available.

48

6 Using the Features

GB Digital Teletext (DTV Mode)

Digital teletext can access special digital teletext services and specific services which broadcast digital teletext. You will need to turn off Subtitle Function before using teletext (refer to page 37 for details).

Teletext within Digital Service

1. In DTV mode, press the TEXT button to display the teletext page.

2. Follow the instructions on digital teletext and move onto the next step by pressing OK, , RED, GREEN, YELLOW, BLUE or 0-9 buttons etc.

To change the digital teletext service, you will need to exit the current text service and change channels. Then enter the text service of the newly selected channel.

3. Press the TEXT button to exit.

49

GB

3. Press the buttons to select your storage device and then press the OK button.

Viewing Photos

1. Press the button on the right side panel of the TV or the INPUT button on the remote control then press the buttons to select the USB mode and then press the OK button.

2. Press the buttons to select PHOTO and then press the OK button.

Connecting a USB Storage Device

1. Switch off the TV before connecting any USB storage device.

2. Connect your USB storage device to the USB port of your TV.

3. Plug the connected devices into the mains socket before switching on the POWER ON/OFF switch which is located at the front right side under the frame.

4. Press the button on the right side panel of the TV or on the remote control to turn on your TV and your USB storage device.

5. Press the button on the right side panel of the TV or the INPUT button on the remote control to display the Source List. Use the buttons to select USB and then press the OK button to confirm.

Rear Right Side View of TV

USB

5V 500mA

HDMI2 HDMI1(ARC) PC IN RFCOMMON INTERFACE (CI)

HEADPHONE PC AUDIO

USB Cable (not included)

AdapterPortable hard Disk

USB Hub

USB

If a hard disk is used, make sure its mains adapter is connected to the mains supply.

If a USB hub is used, make sure its mains adapter is connected to the mains supply as the total current consumption may exceed 500mA.

The maximum supported storage space of the hard disk is 1 TB.

The file system only supports FAT32 format.

If you want to store the video streaming of a DTV programme, the transfer rate of the USB storage device must not be less than 5MB/s, otherwise the picture and sound of the programme will be affected and a warning statement will be shown on the screen. If this happens, please upgrade your USB storage device.

The TV screen will be blank temporarily as it will take time to start up and stabilise the connected hard disk. This is normal and the starting time may vary depending on the brand and the memory size of the connected hard disk.

Disconnect the USB storage device if it is not in use.

Supports USB2.0 only.

7 Entertainment Chapter

7

50

7 Entertainment

GB

Listening to Music

1. Press the button on the right side panel of the TV or the INPUT button on the remote control then press the buttons to select the USB mode and then press the OK button.

2. Press the buttons to select MUSIC and then press the OK button.

4. Press the buttons to navigate in the music folder and then press the OK button.

If you want to select the specified music, press the buttons to select the music file and then press the OK button. A tick box will be displayed. If you want to delete the file, press the RED button to enter the Sub Menu and then press the button to confirm.

4. Press the buttons to navigate in the picture folder and then press the OK button.

If you want to select the specified photos, press the buttons to select the picture file and then press the OK button. A tick box will be displayed. If you want to delete the file, press the RED button to enter the Sub Menu and then press the button to confirm.

3. Press the buttons to select your storage device and then press the OK button.

7. Press the EXIT button to return to the previous menu.

5. Press the (Play) button to view.

6. Press the OK button or the i button to display the function bar. Press the buttons and then press the OK button to select the function: Pause

/ Prev. / Next / Stop / Repeat (Repeat All / Repeat Off / Repeat 1) / Music / Playlist / Info. / Rotate / Zoom In / Zoom Out / Move View.

Supported file formats: JPG.

If this folder also contains music files, you can select a music track to play at the same time you view your photos.

Some audio file formats will not be supported.

Supported file formats: mp3.

51

7Entertainment

GB

4. Press the buttons to navigate in the movie folder and then press the OK button.

If you want to select the specified movie, press the buttons to select the movie file and then press the OK button. A tick box will be displayed. If you want to delete the file, press the RED button to enter the Sub Menu and then press the button to confirm.

5. Press the (Play) button to view.

6. Press the OK button or the i button to display the function bar. Press the buttons and then press the OK button to select the function: Pause /

FB / FF / Prev. / Next / Stop / Repeat (Repeat All / Repeat Off / Repeat 1) / Set A / Playlist / Info / Aspect Ratio.

3. Press the buttons to select your storage device and then press the OK button.

Viewing Movies

1. Press the button on the right side panel of the TV or the INPUT button on the remote control then press the buttons to select the USB mode and then press the OK button.

2. Press the buttons to select MOVIE and then press the OK button.

5. The music information (Album / Title / Bit Rate / Artist / Sampling / Year / Size) will be displayed. Press the (Play) button to play.

6. Press the OK button or the i button to display the function bar. Press the buttons and then press the OK button to select the function: Pause /

FB / FF / Prev / Next / Stop / Repeat (Repeat All / Repeat Off / Repeat 1) / Mute / Playlist / Goto Time.

7. Press the EXIT button to return to the previous menu.

Some video file formats will not be supported.

Supported file formats: MPEG1/2.

52

7 Entertainment

GB

4. Press the buttons to navigate in the text folder and then press the OK button.

If you want to select the specified text file, press the buttons to select the text file and then press the OK button. A tick box will be displayed. If you want to delete the file, press the RED button to enter the Sub Menu and then press the button to confirm.

5. Press the (Play) button to view.

6. Press the OK button or the i button to display the function bar. Press the buttons and then press the OK button to select the function: Prev.

page / Next page / Prev. / Next / Stop / Music / Playlist / Info.

3. Press the buttons to select your storage device and then press the OK button.

My Text

1. Press the button on the right side panel of the TV or the INPUT button on the remote control then press the buttons to select the USB mode and then press the OK button.

2. Press the buttons to select TEXT and then press the OK button.

7. Press the EXIT button to return to the previous menu.

7. Press the EXIT button to return to the previous menu.

If this folder also contains music files, you can select a music track to play at the same time you view your photos.

53

GB

Time Shift Function

This function allows you to pause live TV. The picture will pause and the programme will begin recording so you will not miss any of the programme. You need to have a USB storage device attached to the USB socket for Time Shift Recording to work.

Using the Remote Control You can shift playback to any point of the virtually recorded programme. The PVR Time Shift progress bar will be displayed on the screen for 15 seconds. Press the OK button to display the PVR Time Shift progress bar again.

or When playing, Press the button repeatedly to speed up x 2 / x 4 / x 8 / x 16. Press the button repeatedly to speed up x 2 / x 4 / x 8 / x 16. During fast forward / fast backward state, press the (Play) button to return to normal playback.

or Press the button to jump about 10% forward. Press the button to jump about 10% back.

or During playback, press the button to display a still screen and then press the (Play) button again to resume playback.

During fast forward / fast backward state, press the (Play) button to return to normal playback.

OK During playback, press the OK button to display a still screen and then press the (Play) button again to resume playback.

If you want to exit the PVR Time Shift progress bar and return to the current live broadcast, press the button.

The PVR Time Shift Progress Bar

1 Indicates the status of the currently displayed video ( / / / )

2 Indicates the time lagging behind the live broadcast (PVR reviewing)

3 Indicates the available recording time on your USB storage device

4 Indicates the current time

2

3 4

1

During normal TV viewing, you may press the button to pause the live programme if you want to go out for a while (e.g. going to the bathroom / kitchen). " " will show on the screen.

When you have returned, press the (Play) button to play the missed broadcast programme. " " will show on the screen and the PVR Time Shift progress bar will be displayed on the screen.

The video and sound may have a little bit of delay or be out-of-sync for a few seconds when the unit starts to playback the missed broadcast programme. It will soon turn to normal.

Time Shift Mode and Recording functions may not work if the signal strength is weak.

Stop the time shift function before switching to another input source.

If the transfer rate of the USB storage device is too slow for recording or time shift function, a warning statement will be shown on the screen. If this happens, please upgrade your USB storage device. The minimum transfer speed is 5MB/s.

8 PVR (Personal Video Recorder) Chapter

8

You will only be able to record free to air channels, except in Finland where NO recording features are available.

54

8 PVR (Personal Video Recorder)

GB Recording DTV Programme onto a USB Storage Device

Use this function to record the DTV programme you are watching on the main screen and save it for future viewing.

The recording from timer programme or direct recording may have a little bit of delay when it starts to record the broadcast programme.

Please make sure the USB device is inserted. If not, a warning message will pop up.

1. Press the button to record the programme that you are currently watching.

2. Press the button again, the recording progress bar will disappear.

3. Press the button to stop recording.

Recording will stop automatically when the disk is full.

If you want to turn off your TV during recording, press the button. A dialogue will display.

Press the buttons to select your desired option and then press the OK button to confirm. If you select the middle option in the box, the screen will turn off but the recording will still in progress, the LED indicator will alternatively flash red and blue.

The recording is still in progress.

Do you want to switch off the TV?

Yes, Stop recording and switch off the TV.

Yes, turn off the screen and sound, but keep recording the programme.

No

55

8PVR (Personal Video Recorder)

GB

2. Press the RED button on the remote control while on the selected programme, the RECORDER menu will be displayed. The recording time for the selected programme will be automatically set. If you want to adjust the time, press the buttons to select the settings in the RECORDER menu for the Channel, Start time, End time and Mode.

Channel Press the buttons to select the channel that you want to record.

Start time (for Mode Once, Every Day, Weekly)

Press the buttons to select the Minutes / Hour / Month / Date and then press the buttons to adjust the start time.

End time (for Mode Once, Every Day, Weekly)

Press the buttons to select the Minutes / Hour / Month / Date and then press the buttons to adjust the end time.

Mode Press the buttons to select the Auto / Once / Every Day / Weekly.

3. After finishing all the recorder adjustments, press the OK button to confirm your settings.

Timer Programming

This function is used to perform scheduled recording.

The recording from timer programme or direct recording may have a little bit of delay when it starts to record the broadcast programme.

Please make sure the USB device is inserted. If not, a warning message will pop up.

1. Press the GUIDE button on the remote control. The EPG menu will appear.

EXIT Info ScheduleRecord Date Reminder OK

800 France 2 801 France 4 802 France 5 803 ARTE 804 LCP 805 France 3

Information Movie 1 Programme 2 Programme 3 Programme 4 Programme 5

DTV 17 Jan

17:0016:00

PROGRAMME GUIDE 17 Jan 2011 22:07 15:55-16:25 Movie 1

801 SZTVM02

802 SZTVM03

Start Time 59 Minute 19 Hour

May Month 29 Date

RECORDER

BACKOK

_ +

End Time 29 Minute 20 Hour

May Month 29 Date

Mode Auto

After confirmation, you can press the GREEN button to view your scheduled recording in the Schedule list.

If a programme recording starts when the TV is in standby mode, the LED indicator will flash red and blue.

56

8 PVR (Personal Video Recorder)

GB Playing Recorded Programme

You can play a recorded programme from the recorded programme list or from a USB Storage Device.

1. Press the button on the right side panel of the TV or the INPUT button on the remote control and then press the buttons to select the USB mode and then press the OK button.

2. Press the buttons to select MOVIE and then press the OK button.

3. Press the buttons to select your storage device and then press the OK button.

4. Press the buttons to select the "MSTPVR" folder and then press the OK button.

5. Press the buttons to select your recorded programme and then press the OK button. A tick box will be displayed. If you want to delete the file, press the RED button to enter the Sub Menu and then press the

button to confirm. Press the (Play) button to view.

6. Press the OK button or the i button to display the function bar.

7. Press the buttons and then press the OK button to select the function: Pause / FB / FF / Prev. / Next / Stop / Repeat (Repeat All / Repeat Off / Repeat 1) / Set A / Playlist / Info / Aspect Ratio.

8. Press the EXIT button to return to the previous menu.

57

GB

1. Use a soft dry cloth to wipe away the dust from the screen and surfaces.

2. If the surfaces are extremely dirty, clean the TV with a cloth which has been dipped in a slightly soapy water. Wring the cloth until it is almost dry, then use it to wipe the TV.

3. Ensure there is no excess water on the screen. Allow any water or dampness to evaporate before switching the TV on.

Maintenance

Careful and regular cleaning can prolong the life of your TV.

Hints and Tips

The following table contains various hints and tips to get the best performance from your TV. If you require additional assistance please click on the link for Support Centre: Norway: www.elkjop.no/service Sweden: www.elgiganten.se/service Denmark: www.elgiganten.dk/service Finland: www.gigantti.fi/huolto

The TV does not operate properly.

The TV does not respond when pressing any buttons

The TV may freeze up during use. Disconnect the mains plug from the mains socket for a few minutes. Reconnect the mains plug and try to operate it again as usual.

TV cannot be switched on Check that the TV is connected to the mains supply and the POWER ON/OFF switch

which is located at the front right side under the frame is switched on. Make sure all connected AV devices are switched off before switching on your TV.

The remote control does not work

Check to see if there are any objects between the TV and the remote control causing an obstruction. Ensure that you are pointing the remote control directly at the TV.

Ensure that the batteries are installed with the correct polarity (+ to +, - to -). Install new batteries.

Power is suddenly turned off Check the power of the TV. The mains supply maybe interrupted. Check if the sleep timer is set. Check whether the Auto Standby is activated.

The video function does not work.

No Picture & No Sound Check whether the TV is switched on. Try another channel. The problem may be caused by the broadcaster.

Picture appears slowly after switching on

This is normal, the image is muted during the TV startup process. Please contact your service centre, if the picture has not appeared after five minutes.

No or poor colour or poor picture Adjust the settings in the PICTURE menu. Try another channel. The problem may be caused by the broadcaster. Check if the video cables are connected properly.

Horizontal / Vertical bar or picture shaking

Check for local interference such as an electrical appliance or power tool.

Poor reception on some channels Station or cable channel may be experiencing problems, tune to another station. Station signal is weak, reposition the aerial for better reception. Check for sources of possible interference.

Hints and Tips

9 Other Information Chapter

9

Be sure to press thebutton at the front right side of the TV or on the remote control and then the POWER ON/OFF switch which is located at the front right side under the frame to turn off the TV. Disconnect the mains cable from the mains socket before any cleaning.

Never use alcohol, benzine, paint-thinner, cleaning fluid or other chemicals. Do not use compressed air to remove dust.

58

9 Others Information

GB Lines or streaks in pictures Check aerial (Change the position of the aerial.)

No pictures when connecting HDMI Check if the input source is HDMI1 / HDMI2.

Picture appears in wrong ratio Adjust the Aspect Ratio settings in the PICTURE menu.

The audio function does not work.

Picture OK but no sound Press the VOL + / buttons. Sound muted? Press the MUTE button. Try another channel. The problem may be caused by the broadcaster.

No output from one of the speakers Adjust the Balance settings in the SOUND menu.

Unusual sound from inside the TV A change in ambient humidity or temperature may result in an unusual noise when the TV is switched on or off and does not indicate a fault with the TV.

No sound when connecting HDMI Check if the input source is HDMI1 / HDMI2.

Audio noise Keep the RF coaxial cable away from other connected cables.

Password

Lost password Select the Set Password setting in the LOCK menu, then enter the following master

password 9527. The master password clears your previous password and allows you to enter a new password.

There is a problem in PC mode.

The signal is out of range (Invalid format)

Adjust the resolution, horizontal frequency, or vertical frequency.

Vertical bar or stripe on background & horizontal incorrect position

Use Auto configure or adjust clock, phase, or H/V position.

Screen colour is unstable or shows a single colour

Check the signal cable. Reinstall the PC video card.

Channels are not recording.

The PVR functions are not available in every country

PVR functions are not available in Finland.

Not all channels record You can only record free to air channels. You may have you run out of space on your USB storage device. Delete some files or

use another USB storage device.

FAQs (Frequently Asked Questions)

Why have I lost some / all of my channels?

It happens sometimes if you have a weak signal. Usually it just means youll need to re-scan your digital box or TV. Dont worry, it is easy to do. And once youve done it, you should get all the Freeview channels available to you. If problems persist you may need to get your aerial checked. Talk to your retailer or contact your local aerial installer.

Why do I get blocking on my digital picture?

In most cases, blocking is caused by a reception problem either the signal is too weak or there is some kind of interference. Talk to your retailer or contact your local aerial installer.

Blocking can also be caused by a digital signal that is too strong. If you are still experiencing blocking and the signal is strong, consult your local aerial installer for advice.

Can I watch Freeview using a portable set-top aerial?

Some, but only a few, homes may be able to use a set top aerial. However, for a much better reception, we strongly recommend that you use a rooftop aerial.

If you do not have access to a rooftop aerial for example, if you rent a flat and the aerial is the responsibility of your landlord, or if youre using a second TV in the bedroom and dont want the hassle and expense of using extension cables, a set top aerial may be your only option.

What type of aerial do I need?

If you are installing a new aerial, we recommend a wideband rooftop aerial rather than a loft aerial. Loft aerials generally receive a weaker digital signal and are more likely to get interference from other electrical devices at home. We suggest you have an aerial survey done before getting an aerial upgrade.

Talk to your retailer or contact your local aerial installer.

59

9Others Information

GB Display Modes

The screen resolution has been optimised during production for the display modes listed below.

Although this TV is compatible with a 1080i/1080p input, it is possible that the screen may not display the exact resolution and consequently the picture quality will be adjusted accordingly.

YPbPr Mode Resolution Vertical Frequency (Hz) Aspect Ratio

480I: 720 x 480 60

Auto / 4:3 / 16:9 / Zoom / Subtitle / SmartZoom

480P: 720 x 480

576I: 720 x 576 50

576P: 720 x 576

720P: 1280 x 720 50

60

1080I: 1920 x 1080 50

60

1080P: 1920 x 1080 50

60

PC Mode Please check the display settings of your computer before connecting to the TV. If the display setting of your computer does not match the TV, there may be no video.

Resolution Vertical Frequency (Hz) Aspect Ratio

640 x 480

60

4:3 / 16:9

72

75

800 x 600

60

72

75

1024 x 768

60

70

75

1360 x 768 60

1366 x 768 60

HDMI Mode

Resolution Vertical Frequency (Hz) Aspect Ratio

480I: 1440 x 480 60

Auto / 4:3 / 16:9 / Zoom / Subtitle / SmartZoom

480P: 720 x 480 60

576I: 1440 x 576 50

576P: 720 x 576 50

720P: 1280 x 720 50

60

1080I: 1920 x 1080 50

60

1080P: 1920 x 1080

45

50

60

60

9 Others Information

GB Product Fiche and Specifications

Brand JVC

Model LT-19E33B (Black) / LT-19E33W (White)

Energy Efficiency Class A

Screen Size (measured diagonally) Approx. 47 cm (19 inch)

Average Annual Energy Consumption * (Please refer to *1 under this table)

18.0 W

Average Annual Energy Consumption 26 kWh

Standby Power Consumption 0.50 W

Display Resolution 1366 pixels (horizontal) x 768 pixels (vertical)

Panel System 19 inch LED Backlit LCD Panel

Television System PAL I / SECAM L / BG / DK

Brightness 180 cd/m2

Contrast Ratio 800:1

Peak Luminance (On-Mode/Home Mode) 66%

Power Source 100-240V~50/60Hz

Off Power Consumption 0.00 W

Operating Temperature 0C 40C

Operating Humidity 10% 80%

Mercury Content (mg) 52.0 mg

Presence of Lead *

(Please refer to *2 under this table) 3

Reference Period 2010/1062 2014

Speaker Power 3 W + 3 W

Dimension( W x D x H) with base 444.9 x 159.6 x 321.7 mm

Weight (Net) 2.5 kg

Inputs / Output

SCART 1

HDMI 2

PC IN 1

PC AUDIO 1

YPbPr 1

Common Interface 1

AV 1

SPDIF OUT 1

USB 1

AUDIO IN (RCA) 1 (L + R)

Aerial 1

Headphone (3.5mm) 1

Features and specifications are subject to change without prior notice.

*1 Energy consumption per year based on the power consumption of the television operating 4 hours per day for 365 days. The actual energy consumption will depend on how the television is used.

*2 This television contains lead in certain parts or components where no technology alternatives exist in accordance with existing exemption clauses under the RoHS Directive.

61

9Others Information

GB

A+ A B C D E F

ENERG Y

IE

IJA

IA

2010/1062 - 2014

26 kWh/annum18

Watt

47 cm

19 inch

LT-19E33B

A A+ A B C D E F

ENERG Y

IE

IJA

IA

2010/1062 - 2014

26 kWh/annum18

Watt

47 cm

19 inch

LT-19E33W

A

Dear Customer,

This apparatus is in conformance with the valid European directives compatibility and electrical safety.

European representative of the manufacturer is: DSG Retail Ltd. (co. no. 504877) Maylands Avenue, Hemel Hempstead, Herts., HP2 7TG, UK

The product is distributed and warranted exclusive by DSG Retail Ltd. JVC is the trademark of JVC KENWOOD Corporation, used by DSG Retail Ltd. under license.

(IB-LT-19E33B_W(GB)-161031V4W)

The symbol on the product or its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment.

For more information about where you can drop off your waste for recycling, please contact your local authority, or where you purchased your product.

Notes for battery disposal

The batteries used with this product contain chemicals that are harmful to the environment. To preserve our environment, dispose of used batteries according to your local laws or regulations. Do not dispose of batteries with normal household waste.

For more information, please contact the local authority or your retailer where you purchased the product.

Dolby Digital

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

The HD Ready logo is a trademark of DIGITALEUROPE.

All trademarks are the property of their respective owners and all rights are acknowledged.

MPEG-2 NOTICE

Any use of this product in any matter other than personal use that complies with the MPEG-2 standard for encoding video information for packaged media is expressly prohibited without a license under applicable patents in the MPEG-2 Patent Portfolio, which license is available from MPEG LA, LLC, 6312

Manualsnet FAQs

If you want to find out how the LT-19E33B JVC works, you can view and download the JVC LT-19E33B Instruction Manual on the Manualsnet website.

Yes, we have the Instruction Manual for JVC LT-19E33B as well as other JVC manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a JVC LT-19E33B. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the JVC LT-19E33B Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This JVC LT-19E33B Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download JVC LT-19E33B Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print JVC LT-19E33B Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the JVC LT-19E33B Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.