Jura Z10 Coffee Machine Instruction Manual PDF

1 of 40
1 of 40

Summary of Content for Jura Z10 Coffee Machine Instruction Manual PDF

Z10 (EA/SA/INTA) Instructions for Use

2

Table of contents

Your Z10

1 Control elements 4

2 For your safety 6 Comply with the instructions for use 6 Proper use 6 User limitations 6 Use by children 7 What to do in the event of damage 7 Preventing damage 7 Danger of electric shock 9 Danger of burns, scalding and injury 9

3 Preparing and using for the first time 10 Operation with touchscreen display and Rotary Switch 10 Setting up the machine 10 Filling the bean container 10 Determining the water hardness 11 First-time use 11 Managing your Z10 the JURA Cockpit 13 Connecting milk 13 Connecting the Cool Control milk cooler wirelessly 14 Establishing a WiFi connection 14

4 Preparation 15 Aroma Selection 16 Preparation with preselection (Speciality Selection) 16 Cold Brew 17 Espresso and coffee 17 Latte macchiato, cappuccino and other speciality coffees with milk 17 Milk and milk foam 18 Espresso doppio 18 Caff Barista and lungo Barista 18 Pot of coffee 18 Ground coffee 19 Hot water 20 Adjusting the product settings 20

5 Daily operation 21 Switching the machine on and off 21 Filling the water tank 21 Maintenance actions 22

3

Table of contents

6 Machine settings 23

7 Maintenance 24 Rinsing the machine 24 Automatic milk system rinsing 24 Cleaning the milk system 24 Dismantling and rinsing the dual spout 25 Inserting/changing the filter 27 Cleaning the machine 28 Descaling the machine 29 Descaling the water tank 31 Cleaning the bean container 31

8 Display messages 32

9 Troubleshooting 33

10 Transport and environmentally friendly disposal 35 Transport / Emptying the system 35 Disposal 35

11 Technical data 36

12 Index 37

13 JURA contact details / Legal information 40

1 Control elements

4

1 Control elements

11

12

14

8

6

7

1 2 3

5

910

13

4

q On/Off button Q w Cover for powder chute for ground coffee e Powder chute for ground coffee r Service socket with JURA WiFi Connect

(under cover) t Bean container with aroma preservation

cover z Rotary Switch u Touchscreen display i Height- and width-adjustable dual spout

o Cup grille p Drip tray a Coffee grounds container s Mains cable (permanently connected

or plug-in) d Hot-water spout f Water tank g Container for milk system cleaning h Measuring spoon for ground coffee j Filter casing

6

hg j

2 For your safety

6

2 For your safety

Before using the machine, read these instructions for use thoroughly and completely and comply with the instructions they contain Keep these instructions for use close to the machine and pass them on to the next user

Failure to observe the instructions for use may result in serious injuries or damage to property Safety information is therefore indicated as fol- lows:

J WARNING Indicates circumstances that may result in serious injuries or death

J CAUTION Indicates circumstances that may result in minor injuries

CAUTION Indicates circumstances that may result in damage to property

The machine is intended for private domestic use It should only be used for coffee preparation and to heat milk and water Use for any other purpose will be deemed improper

People, including children, who U do not have the physical, sensory or mental

capabilities to use the machine safely or U are inexperienced or lack knowledge

must be supervised by a responsible person when using it, or must be instructed in how to use it cor- rectly

When using the CLARIS Smart filter cartridge or a JURA WiFi Connect, wireless connections are estab-

Comply with the instructions for use

Proper use

User limitations

2 For your safety

7

lished Specific details on the frequency band used and the maximum transmission power can be found in the Technical data section

Children must be able to recognise and under- stand the potential dangers arising from incor- rect use:

U Keep children under the age of 8 away from the machine, or supervise them constantly

U Children aged eight and over may only oper- ate the machine without supervision if they have been instructed in how to use it safely

U Children may not clean or service the machine unless supervised by a responsible person

U Do not allow children to play with the machine

Never use a damaged machine or mains cable. This could result in fatal electric shock.

U In the event of signs of damage, disconnect the machine from the mains To do this, first switch the Z10 off with the On/Off button Q Only then should you remove the mains plug from the power socket

U Replace a damaged plug-in mains cable with an original JURA mains cable Unsuitable mains cables may result in consequential damage

U Only permit authorised JURA service centres to carry out repairs to the machine and the permanently connected mains cable. Unsuitable repairs may result in consequential damage

To avoid damage to the machine and the mains cable:

U Do not use the Z10 and the mains cable near hot surfaces

Use by children

What to do in the event of damage

Preventing damage

2 For your safety

8

U Do not allow the mains cable to rub against sharp edges and ensure that it does not become trapped

U Never allow the mains cable to loosely hang down The mains cable could pose a tripping hazard or become damaged

U Protect the Z10 from weather and direct sunlight

U Only connect the Z10 to a mains voltage corresponding to that stated on the rating plate The rating plate is located on the underside

U Connect the Z10 directly to a domestic power socket Using multi-socket adapters or extension cords may cause overheating

U Do not use alkaline or alcohol-based cleaning agents; only use mild cleaning agents and a soft cloth

U Do not use any coffee beans treated with additives or caramelised coffee beans

U Only fill the water tank with fresh, cold, non-carbonated water

U Switch the machine off with the On/Off button Q if you are going to be absent for a longer period of time and remove the mains plug from the power socket

U Only use original JURA maintenance products Use of products that are not explicitly recom- mended by JURA could damage your Z10

2 For your safety

9

Water conducts electricity. Do not bring water and electricity into contact with one another:

U Never touch the mains plug with wet hands U Do not immerse the Z10 and/or mains cable in

water U Do not put the Z10 or any individual parts in

the dishwasher U Before cleaning, switch the Z10 off with the On/

Off button Q Always wipe the Z10 with a damp cloth rather than a wet one, and protect it from prolonged exposure to water splash The Z10 must not be cleaned with a jet of water

U The Z10 is not suitable for installation on a surface where a jet of water can be used

U Do not touch the spouts during operation Use the handles provided

U Optionally, your Z10 can be remotely operated using mobile devices When preparing a product or initiating a maintenance programme, make sure that other people are not put at risk for example, through contact with the spouts

U Be careful to ensure that the dual spout is correctly installed and clean Otherwise parts may come loose There is a danger of parts being swallowed

Danger of electric shock

Danger of burns, scalding and injury

3 Preparing and using for the first time

10

3 Preparing and using for the first time

You can operate your Z10 in two ways: U Your Z10 has a touchscreen display Tap or swipe the display to

trigger an action

U Use the Rotary Switch, which can be turned or pressed

When setting up your Z10, please note the following: U Choose a spot for your Z10 which protects the machine against

overheating Ensure that the ventilation slots are not covered U Place the Z10 on a horizontal surface that is not sensitive to

water

The bean container has an aroma preservation cover This will ensure that your coffee beans retain their aroma for longer

Coffee beans which have been treated with additives (eg sugar), ground coffee or freeze-dried coffee will damage the grinder T  Only use roasted, untreated coffee beans to fill the bean

container

T  Remove the aroma preservation cover T  Remove any dirt or foreign objects from inside the bean

container

Operation with touchscreen display and Rotary Switch

s

Setting up the machine

Filling the bean container

CAUTION

3 Preparing and using for the first time

11

T  Fill the bean container with coffee beans and close the aroma preservation cover

When you use the machine for the first time, you must set the water hardness If you do not know the hardness of your water, you can find this out first Use the Aquadur test strips supplied with the machine T  Hold the test strip under flowing water for one second Shake

off the water T  Wait for about 1 minute T  You will then be able to read the degree of water hardness from

the discolouration of the Aquadur test strip and the descrip- tion on the packaging

If the machine is operated with a defective mains cable, there is a danger of potentially fatal electric shock T  Never use a machine which is damaged or has a defective mains

cable

Milk, sparkling mineral water or other liquids can damage the water tank or the machine T  Only fill the water tank with fresh, cold water

Precondition: The bean container has been filled T  For machines with a plug-in mains cable: Connect the mains

cable to the machine T  Insert the mains plug into a power socket T  Press the On/Off button Q to switch the Z10 on

Sprachauswahl

E To display more languages, touch 9 or 0 until the desired language comes into focus (eg English)

T  Touch Save Saved appears briefly on the display Water hardness

Determining the water hardness

First-time use

J WARNING

CAUTION

3 Preparing and using for the first time

12

E If you do not know the hardness of your water, you must find this out first (see chapter 3 Preparing and using for the first time Determining the water hardness)

T  Touch 9 or 0 to change the water hardness setting T  Touch Save

Saved appears briefly on the display Insert filter

T  Place a receptacle under the hot-water spout and dual spout T  Remove the water tank and rinse it with cold water

T  Open the filter casing

T  Insert the CLARIS Smart filter cartridge T  Close the filter casing T  Insert the filter casing into the water tank

T  Turn the filter casing clockwise until it audibly clicks into place T  Fill the water tank with fresh, cold water and reinsert the tank

E The machine automatically detects that you have just inserted the filter cartridge

Saved Filter is being rinsed System is filling Empty drip tray

T  Empty the drip tray and put it back into the machine Accessory

q

w

3 Preparing and using for the first time

13

T  Touch Connect to connect your Z10 to your network T  If necessary, scan the QR code with your mobile device to down-

load the JURA app (JOE) T  Touch Connect T  Place a receptacle under the dual spout

Machine is rinsing The start screen is displayed Your Z10 is ready for use

You can manage your Z10 with the JURA Cockpit. Press the Rotary Switch to open the JURA Cockpit

Symbol Meaning

c Maintenance section (blue)

f Machine setting section (green)

h Smart mode active

4 (white) Your Z10 is connected with the network and/or Cool Control via JURA WiFi Connect

4 (red) No connection to the WiFi network

$ Filter mode

Your Z10 creates fine, creamy, feather-light milk foam with a perfect consistency The most important requirement for frothing milk is a milk temperature of 48 C We would therefore recommend using a milk cooler or a milk container T  Connect the milk pipe to the dual spout T  Connect the other end of the milk pipe to a milk container or a

milk cooler

Managing your Z10 the JURA Cockpit

c

4 $

Connecting milk

3 Preparing and using for the first time

14

Your Z10 can be connected with your Cool Control milk cooler

Precondition: The JURA WiFi Connect is inserted into the service socket of your Z10 T  Press the Rotary Switch T  Touch the Machine setting f symbol T  Touch 1/2 to go to the next page T  Touch Connect accessory T  Touch Connect

Saved

Your Z10 can be connected with your JURA app (JOE)

Precondition: JOE is installed on your mobile end device and you have logged into your home network The JURA WiFi Connect is inserted into the service socket of your Z10 T  Press the Rotary Switch T  Touch the Machine setting f symbol T  Touch Wi-Fi connection T  Touch Connect T  Add a new network in your JURA app (JOE) and follow the

instructions

Connecting the Cool Control milk cooler wirelessly

Establishing a WiFi connection

4 Preparation

15

4 Preparation

Basic information about preparing drinks:

Aim What to do Change the coffee strength of a single product

During the grinding operation, move your finger across the display or turn the Rotary Switch

Change the amount for a single product

During preparation, move your finger across the display or turn the Rotary Switch

Change the consistency of grind, coffee strength, quantity and temperature for any given product

Tap and hold a product for around 2 seconds and configure the settings under Product settings

Display more products Turn the Rotary Switch to access the product selector view or move your finger across the display

Stop preparation Touch Cancel or press the Rotary Switch

Place a product on the start screen as a favourite

Tap and hold a product for around 2 seconds and place another product under Replace product

E If no actions are performed on the machine for 9 minutes, your Z10 will switch to standby mode Touch the display or press or turn the Rotary Switch to take it out of standby mode

E Coffee tastes best served hot A cold porcelain cup cools the beverage and impairs the taste We therefore recommend prewarming the cups You can purchase a JURA cup warmer from your specialised dealer

4 Preparation

16

You can use Aroma Selection on your Z10 to change the consistency of grind and coffee strength of any product:

Example: Espresso with higher coffee strength T  Place a cup under the dual spout

T  Touch the Aroma Selection symbol (bottom right) T  Touch Espresso T  Touch s to increase the coffee strength T  Touch Start

The preset amount of water for coffee flows into the cup

Touch Z Z Z Z to call up the Speciality Selection and activate the desired preselection for your next product:

Speciality Selection Meaning

Cold Brew d (espresso, coffee, caff Barista, lungo Barista)

The product is prepared as a cold beverage

Extra Shot s (all speciality coffees)

The product is prepared with two brewing operations, each with half the amount of water for a speciality coffee with a particularly intense taste

Double product e The product is prepared 2x in succession (2 strokes)

Ground coffee The product is prepared with ground coffee

E The Speciality Selection closes after 10 seconds E If you press your preselection briefly, the next product will

be prepared according to your preselection E If you press and hold your preselection (for 2 seconds), the

preselection will be active until you switch off your Z10

Aroma Selection

s

Preparation with preselection (Speciality Selection)

4 Preparation

17

The Cold Brew preselection is used to prepare a cold speciality cof- fee

Example: Coffee with Cold Brew preselection T  Fill the water tank with cold water

E You can influence the brewing result: The colder the water in the water tank, the colder the brewed beverage will be

T  Place a cup under the dual spout T  Add ice cubes to the cup according to your own preferences T  Touch Z Z Z Z to call up the Speciality Selection

E The Speciality Selection closes after 10 seconds

T  Touch d to activate the Cold Brew preselection T  Touch Coffee

The preset amount of water for coffee flows into the cup

Example: Coffee T  Place a cup under the dual spout T  Touch Coffee

The preset amount of water for coffee flows into the cup

Your Z10 prepares the following speciality coffees with milk at the touch of a button:

U Cortado U Latte macchiato U Macchiato U Flat white U Cappuccino U Caf au lait

Example: Latte macchiato Precondition: Milk is connected to the dual spout

Cold Brew

Espresso and coffee

Latte macchiato, cappuccino and other speciality coffees with milk

4 Preparation

18

T  Place a glass under the dual spout T  Touch Latte macchiato

The preset amounts of milk and milk foam flow into the glass

E There is a short interval while the hot milk separates from the milk foam This allows the typical layers of a latte macchiato to form

The preset amount of water for espresso flows into the glass

E 8 minutes after preparation, the milk system is automati- cally rinsed Therefore always place a receptacle under the dual spout after preparing milk

To ensure that the milk system in the dual spout always works prop- erly, you must clean it daily (see chapter 7 Maintenance Cleaning the milk system)

Your Z10 prepares hot milk and milk foam

E 8 minutes after milk preparation, the milk system is automatically rinsed Therefore always place a receptacle under the dual spout after preparing milk

Doppio is Italian for double When you select Espresso doppio, two espressi are prepared one after the other The result is an extra full-bodied and aromatic speciality coffee

For the caff Barista and lungo Barista, the Z10 blends the coffee with hot water using a special preparation method This results in a full-bodied speciality coffee which is particularly easy to digest You can change the amount of this additional water (see chapter 4 Preparation Adjusting the product settings)

Relive the good old days a pot of coffee, traditionally made from porcelain, is perfect when you want to slow things down and catch up with friends or family The pot of coffee function provides a large portion of black coffee which is generally served at breakfast or to accompany a piece of cake Fill the pot with 15 strokes of black cof- fee

Milk and milk foam

Espresso doppio

Caff Barista and lungo Barista

Pot of coffee

4 Preparation

19

You can choose to use a second coffee variety, for example decaf- feinated coffee, with the filter funnel for ground coffee

U Never add more than two level measuring spoons of ground coffee

U Use ground coffee which is not ground too finely Very fine coffee can block up the system so that the coffee only comes out in drips

U If you did not fill the machine with a sufficient amount of ground coffee, Not enough ground coffee is displayed and the Z10 stops the operation

U The desired speciality coffee must be prepared within approxi- mately one minute after filling with the ground coffee Otherwise the Z10 stops the operation and is once more ready for use

All speciality coffees with ground coffee are always prepared follow- ing the same model

Example: Proceed as follows to prepare one espresso using ground coffee T  Place an espresso cup under the dual spout T  Touch Z Z Z Z to call up the Speciality Selection T  Touch T  Touch Espresso

Please add ground coffee T  Open the powder chute cover T  Place one level measuring spoon of ground coffee into the filler

funnel T  Close the cover of the powder chute T  Touch Next T  Touch Espresso

The preset amount of water for espresso flows into the cup

Ground coffee

4 Preparation

20

The Z10 allows you to prepare different variants of hot water: U Hot water U Hot water for green tea

There is a danger of scalding from hot water splashes T  Avoid direct contact with the skin

Example: Hot water T  Place a cup under the dual spout T  Touch Hot water

The preset amount of water flows into the cup

Touch a product for approximately 2 seconds to access the settings: U Product settings: Specify individual settings such as coffee

strength, amount of water, etc U Initials: Change the name of the product U Permanent preselection: Specify a permanent preselection

(Speciality Selection) U Replace product: Replace the products on the start screen

with your favourites

The settings always follow the same model

Example: Proceed as follows to change the coffee strength for one coffee T  Touch Coffee for approximately 2 seconds. T  Touch Product settings

E Depending on the selected product, there will be different settings available which are represented by symbols on your display

T  Touch the _ symbol The _ symbol appears in white

T  Turn the Rotary Switch to change the setting T  Touch Save T  Touch Back to return to the start screen

Hot water

J CAUTION

Adjusting the product settings

5 Daily operation

21

5 Daily operation

T  Place a receptacle under the dual spout T  Press the On/Off button Q

Machine is rinsing Your Z10 is switched on or off

E When the machine is switched off, the system is only rinsed if a speciality coffee has been prepared

E If milk has been prepared before switching off, you will be prompted to carry out milk system cleaning (Clean the milk system) After 30 seconds the switch-off process continues automatically

Daily maintenance of the machine and hygiene when handling milk, coffee and water are key to a perfect coffee result in the cup every time You should therefore change the water daily.

Milk, sparkling mineral water or other liquids can damage the water tank or the machine T  Only fill the water tank with fresh, cold water

T  Remove the water tank and rinse it with cold water T  Fill the water tank with fresh, cold water and reinsert the tank

Switching the machine on and off

Filling the water tank

CAUTION

5 Daily operation

22

Optimal coffee quality depends on many factors One important prerequisite is regular maintenance of your Z10 Carry out the fol- lowing steps:

Maintenance action Daily If necessary Note Empty the drip tray and coffee grounds container and rinse with warm water (The insert for the drip tray, including the drip tray itself, and the coffee grounds container are dishwasher-safe)

x Always empty the coffee grounds container when the machine is switched on This is the only way of resetting the coffee grounds counter

Clean the milk system (if heavily soiled, also dismantle it)

x (see chapter 7 Maintenance Dis- mantling and rinsing the dual spout)

Rinse the milk pipe x Rinse the water tank x Wipe the surface of the machine with a clean, soft, damp cloth (eg microfibre cloth)

x

Change the milk pipe HP3 approx every 3 months

Change the interchangeable milk spout CX3

approx every 3 months

Clean the inside of the water tank with a brush

x

Clean the top and bottom of the cup grille

x

Clean the drip tray and coffee grounds container

x The message Maintenance information appears in the Maintenance section c within the Cockpit

E You will find more information about maintenance of your Z10 in the Maintenance c section in the programme item Maintenance information

Maintenance actions

6 Machine settings

23

6 Machine settings

Press the Rotary Switch to open the Cockpit In the Machine setting f section, you can make the following settings:

Programme item Explanation Smart mode Arrange products by preparation frequency on the start screen after a

certain amount of time (the h symbol in the Cockpit shows that Smart mode is activated)

Product name Display product images with/without product names on the start screen Add start screen Define number of start screens (14) Number of products

Set the number of products on the start screen: 2 products, 5 products or automatic (Smart mode)

Wi-Fi connection Z10 connect wirelessly with the JURA app (JOE) or disconnect again (see chapter 3 Preparing and using for the first time Establishing a WiFi connection)

Switch off after Set the automatic switch-off time to save energy (switch-off after 15 minutes, 30 minutes or 1 9 hours after the last action on the machine)

Choose language Set language Factory setting Z10 Restore factory settings (your Z10 will switch off after this) Water hardness Set the hardness of the water used (1 dH to 30 dH) to prevent

calcification of your machine Units Set the unit for the amount of water (ml or oz) Information View software version Connect accessory Wirelessly connect your Z10 with your JURA app (JOE) or with the Cool

Control milk cooler, or disconnect again Display Change display brightness (in 10% increments) Empty system Empty the system to protect the Z10 from frost during transport (see

chapter 10 Transport and environmentally friendly disposal Transport / Emptying the system)

Product counter View product counter Maintenance counter

View the maintenance counter

7 Maintenance

24

7 Maintenance

Basic information about maintenance: U Press the Rotary Switch to open the Cockpit This area consists

of a Maintenance status c section and a Machine setting f section You can manage the maintenance of your Z10 in the c section

U If a maintenance programme needs to be initiated, the c symbol appears with a red background Press the Rotary Switch to open the Cockpit The Cockpit shows maintenance programmes that need to be carried out in the form of messages with red backgrounds Press the button that corresponds to the message to go straight to the maintenance programme Maintenance programmes that are due imminently are indicated on your Z10 by means of a bar display within the message

U Carry out each maintenance programme when you are prompted to do so

You can start coffee system rinsing manually at any time

Precondition: The start screen is displayed T  Place a receptacle under the dual spout T  Press the Rotary Switch T  Touch c T  Touch Rinse to start the rinse operation

The operation stops automatically

8 minutes after milk preparation, the milk system is automatically rinsed Therefore always place a receptacle under the dual spout after preparing milk

To ensure that the milk system in the dual spout always works properly, you must clean it daily when you have been preparing milk

If the wrong cleaning agent is used, the machine could be damaged and/or traces could be left behind in the water T  Use only original JURA maintenance products

Rinsing the machine

Automatic milk system rinsing

Cleaning the milk system

CAUTION

7 Maintenance

25

E JURA milk system cleaner is available from specialised dealers

E To clean the milk system, use the container supplied

Precondition: The start screen is displayed T  Press the Rotary Switch T  Touch c T  Touch Clean the milk system T  Touch Next

Cleaning agent for milk system / Connect the milk tube T  Remove the milk pipe from the milk container or milk cooler T  Pour one dosing unit of milk system cleaner into the container

for milk system cleaning

T  Place the container under the dual spout and connect the milk pipe with the container

E To connect the milk pipe to the container correctly, the pipe must be fitted with a connector

T  Slide the dual spout down to fix the container in place T  Touch Start

The dual spout and the milk pipe are cleaned The operation stops automatically

If insufficient foam is produced when the milk is frothed or milk sprays out of the dual spout, the spout may be dirty If this happens, dismantle and rinse the dual spout T  Remove the milk pipe and rinse it thoroughly under running

water

6

6

Dismantling and rinsing the dual spout

7 Maintenance

26

T  Press the releasing devices and pull the cover of the dual spout up and off

T  Remove the milk system from the dual spout

E Do not lever the milk system back and forth to disconnect it from the milk pipe connection Remove the milk system firmly to prevent it from tilting

T  Dismantle the milk system into its individual parts T  Rinse all the parts under running water If there are severely

dried-on milk residues, firstly immerse the individual parts in a solution of 250 ml water and one dosing unit of JURA milk system cleaner Then rinse the individual parts thoroughly

T  Reassemble the milk system

T  Fit the assembled individual parts back in the dual spout and press it firmly

7 Maintenance

27

T  Fit the cover of the dual spout Make sure the cover of the dual spout is correctly engaged

Once the filter cartridge stops working (depending on the water hardness setting), the Z10 will prompt you to change the filter

E Your Z10 no longer has to be descaled if you are using the CLARIS Smart filter cartridge

E CLARIS Smart filter cartridges are available from specialised dealers

Precondition: The start screen is displayed (Or Change the filter is displayed in the Cockpit if you are already using a filter) T  Remove and empty the water tank T  Turn the filter casing anti-clockwise and remove it from the

water tank T  Open the filter casing T  Remove the old CLARIS Smart filter cartridge

T  Insert a new CLARIS Smart filter cartridge T  Close the filter casing T  Insert the filter casing into the water tank

Inserting/changing the filter

q

w

7 Maintenance

28

T  Turn the filter casing clockwise until it audibly clicks into place T  Fill the water tank with fresh, cold water and reinsert the tank

The machine automatically detects that you have just inserted/ changed the filter cartridge Filter is being rinsed Empty drip tray

T  Empty the drip tray and coffee grounds container and put them back into the machine The start screen is displayed

After 180 preparations or 80 switch-on rinses, the Z10 will prompt you to clean it

If the wrong cleaning agent is used, the machine could be damaged and/or traces could be left behind in the water T  Use only original JURA maintenance products

E The cleaning programme lasts approximately 20 minutes E Do not interrupt the cleaning programme The quality of

cleaning will be impaired if you do so E JURA cleaning tablets are available from specialised dealers

Precondition: Clean is displayed in the Cockpit T  Touch Clean T  Touch Start

Empty coffee grounds container T  Empty the drip tray and coffee grounds container and put them

back into the machine Press the Rotary Switch

T  Place a receptacle under the dual spout T  Press the Rotary Switch

Machine is being cleaned, water flows out of the dual spout The operation is interrupted, Add cleaning tablet

T  Open the cover of the filler funnel for ground coffee

Cleaning the machine

CAUTION

7 Maintenance

29

T  Insert a JURA cleaning tablet into the filler funnel T  Close the cover of the filler funnel T  Touch Next

Machine is being cleaned, water flows out of the dual spout repeatedly Empty coffee grounds container

T  Empty the drip tray and coffee grounds container and put them back into the machine

The Z10 builds up deposits of limescale over time and automatically prompts you to descale it when necessary The degree of calcifica- tion depends on the hardness of your water

E If you are using a CLARIS Smart filter cartridge, you will not be prompted to descale

If the descaling agent comes into contact with the skin or eyes, this can cause irritation T  Avoid contact with the skin or eyes T  Rinse off the descaling agent with clean water Should you get

any descaling agent in your eye, see a doctor

If the wrong descaling agent is used, the machine could be damaged and/or traces could be left behind in the water T  Use only original JURA maintenance products

If the descaling operation is interrupted, there may be damage to the machine T  Allow the descaling programme to run to the end

If the descaling agent comes into contact with sensitive surfaces (eg marble), damage cannot be ruled out T  Clean up any splashes immediately

E The descaling programme lasts approximately 45 minutes E JURA descaling tablets are available from specialised dealers

Precondition: Descale is displayed in the Cockpit T  Touch Descale T  Touch Start

Empty drip tray T  Empty the drip tray and coffee grounds container and put them

back into the machine Pour descaling agent into water tank

Descaling the machine

J CAUTION

CAUTION

CAUTION

CAUTION

7 Maintenance

30

T  Remove and empty the water tank T  Completely dissolve 3 JURA descaling tablets in a receptacle

holding 600 ml of water This may take several minutes T  Pour the solution into the empty water tank and insert it into

the machine Press the Rotary Switch

T  Place a receptacle under the hot-water spout and dual spout T  Press the Rotary Switch

Machine is being descaled, water flows straight into the drip tray and out of the hot-water spout and dual spout repeatedly Empty drip tray

T  Empty the drip tray and coffee grounds container and put them back into the machine Fill water tank

T  Empty the receptacle and place it under the hot-water and dual spouts

T  Remove the water tank and rinse it thoroughly T  Fill the water tank with fresh, cold water and reinsert the tank

Press the Rotary Switch T  Press the Rotary Switch

Water flows straight into the drip tray and out of the hot-water spout and dual spout repeatedly Empty drip tray

T  Empty the drip tray and coffee grounds container and put them back into the machine

E If the descaling operation stops unexpectedly, rinse the water tank thoroughly

3x

7 Maintenance

31

Limescale deposits may form in the water tank To ensure correct function of the machine, descale the water tank from time to time T  Remove the water tank T  If you use a CLARIS Smart filter cartridge, remove this T  Completely fill the water tank and dissolve 3 JURA descaling tab-

lets in it T  Leave the water tank with the descaling solution for several

hours (eg overnight) T  Empty the water tank and rinse it thoroughly T  If you use a CLARIS Smart filter cartridge, insert this again T  Fill the water tank with fresh, cold water and reinsert the tank

Coffee beans may be covered with a slight oil film which remains on the walls of the bean container These traces may negatively affect the coffee result For this reason clean the bean container from time to time

Precondition: Fill bean container is displayed T  Switch the machine off with the On/Off button Q T  Remove the aroma preservation cover T  Clean the bean container with a soft, dry cloth T  Fill the bean container with coffee beans and close the aroma

preservation cover

Descaling the water tank

Cleaning the bean container

8 Display messages

32

8 Display messages

Messages on the start screen

Message Cause/Result Action Fill water tank The water tank is empty You cannot

prepare any products T Fill the water tank (see chapter 5 Daily operation Filling the water tank)

Empty coffee grounds container / Empty drip tray

The coffee grounds container is full / The drip tray is full You cannot prepare any products

T Empty the coffee grounds container and the drip tray (see chapter 5 Daily operation Maintenance actions)

Drip tray not fitted

The drip tray is not inserted correctly or is not inserted at all You cannot prepare any products

T Fit the drip tray

Fill bean container

The bean container is empty You cannot prepare any speciality coffees, but you can prepare hot water and milk

T Fill the bean container (see chapter 3 Preparing and using for the first time Filling the bean container)

Not enough ground coffee

There is insufficient ground coffee in the machine; the Z10 stops the operation

T The next time you prepare a beverage, add more ground coffee (see chapter 4 Preparation Ground coffee)

Spout is not fitted

The cover of the dual spout has not been fitted

T Correctly fit the cover of the dual spout

Messages in the Cockpit

Message Cause/Result Action The filter symbol $ lights up red Change the filter

The filter cartridge no longer works

T Replace the CLARIS Smart filter cartridge (see chapter 7 Maintenance Inserting/changing the filter)

Clean The Z10 is prompting you to clean it

T Perform cleaning (see chapter 7 Maintenance Cleaning the machine)

Descale The Z10 is prompting you to descale it

T Perform descaling (see chapter 7 Maintenance Descaling the machine )

Clean the milk system

The Z10 prompts you to clean the milk system

T Perform milk system cleaning (see chapter 7 Maintenance Cleaning the milk system)

9 Troubleshooting

33

9 Troubleshooting

Problem Cause/Result Action Insufficient foam is produced when the milk is frothed or milk sprays from the dual spout

The dual spout is dirty T Make sure the cover of the dual spout is correctly fitted T Clean the milk system in the dual spout (see chapter 7 Maintenance Cleaning the milk system) T Dismantle and rinse the dual spout (see chapter 7 Maintenance Dismantling and rinsing the dual spout)

The milk and milk foam temperature is set too high

T Set a lower milk and milk foam tempera- ture for the product

With speciality coffees with a finer grinder setting, the coffee only flows in drips

The coffee has been ground too finely and is blocking the system

T If possible, set the consistency of grind for the speciality coffee 12 levels coarser (see chapter 4 Preparation Adjusting the product settings)

Coffee only comes out in drips when it is being prepared

The coffee has been ground too finely and is blocking the system

T Use more coarsely ground coffee (see chapter 4 Preparation Ground coffee)

The water hardness may not have been correctly set

T Perform descaling (see chapter 7 Mainte- nance Descaling the machine )

There is dry ground coffee behind the coffee grounds container

The beans used are resulting in an above- average volume of ground coffee

T Reduce the coffee strength or choose a finer grinder setting (see chapter 4 Prepara- tion Adjusting the product settings)

Fill water tank is not displayed although the water tank is empty

There is a lot of limescale in the water tank

T Descale the water tank (see chapter 7 Maintenance Descaling the water tank)

Grinder is making a very loud noise

There are foreign objects in the grinder

T Contact customer support in your country (see chapter 13 JURA contact details / Legal information)

Error 2 or Error 5 is displayed

If the machine has been exposed to the cold for a long period of time, heating may be disabled for safety reasons

T Warm the machine at room temperature

9 Troubleshooting

34

Problem Cause/Result Action Other Error messages are displayed

T Switch the Z10 off with the On/Off button Q Contact customer support in your country (see chapter 13 JURA contact details / Legal information)

Little or no steam comes out of the dual spout The pump is very quiet

The connector of the milk system in the dual spout may be blocked by milk residues or limescale fragments loosened during descaling

T Press the releasing devices and pull the cover of the dual spout up and off T Remove the milk system from the dual spout T Unscrew the black connector with the aid of the hexagonal hole on the measuring spoon for ground coffee T Clean the connector thoroughly T Screw the connector back on by hand T Carefully tighten it using the hexagonal hole on the measuring spoon, turning by no more than a quarter of a rotation

E If you were unable to solve the problem, contact customer support in your country (see chapter 13 JURA contact details / Legal information)

10 Transport and environmentally friendly disposal

35

10 Transport and environmentally friendly disposal

Keep the packaging for your Z10 It should be used to protect the machine during transport

In order to protect the Z10 from frost during transport, the system must be emptied

Precondition: The start screen is displayed T  Remove the milk pipe from the dual spout T  Place a receptacle under the dual spout T  Press the Rotary Switch T  Touch the Machine setting f symbol T  Switch to the 2/2 page T  Touch Empty system T  Remove and empty the water tank T  Press the Rotary Switch

Steam will continue to be discharged from the dual spout and the hot-water nozzle until the system is empty Your Z10 is switched off

Please dispose of old machines in an environmentally neutral way H

Old machines contain valuable, recyclable materials which should be recycled Please therefore dispose of old machines via suitable collection systems

Transport / Emptying the system

Disposal

11 Technical data

36

11 Technical data

Voltage 220240 V ~, 50 Hz Power 1450 W Conformity mark A

Energy consumption approx 6 Wh Pump pressure static, max 15 bar Holding capacity of water tank

24 l

Holding capacity of bean container

280 g

Holding capacity of coffee grounds container

max 20 portions

Cable length approx 11 m Weight 1213 kg (depending on machine

version) Dimensions (W  H  D) 32 36 47 cm Milk system HP3 Interchangeable milk spout CX3 CLARIS filter cartridge Smart (RFID technology)

Frequency band 1356 MHz Max transmission power < 1 mW

JURA WiFi Connect (Bluetooth connection)

Frequency band 24 GHz Max transmission power < 1 mW

JURA WiFi Connect Frequency band 24 GHz Max transmission power < 100 mW

JURA type 759

Information for testers (repeat test in accordance with DIN VDE 0701-0702): The central grounding point (CGP) is located on the back of the machine, right next to the mains cable's connection point

12 Index

37

12 Index

A Addresses 40 Adjusting the product settings 20 Aroma preservation cover

Bean container with aroma preservation cover 5

Aroma Selection 16

B Bean container

Bean container with aroma preservation cover 5 Cleaning 31 Filling 10

Bluetooth 36 Bus bar

Technical data 36 Button

On/Off button 5 Bypass amount of water 18

C Caff Barista 18 Caff latte 17 Cappuccino 17 Central grounding point 36 Children 7 CLARIS Smart filter cartridge

Changing 27 Inserting 27

Cleaning Bean container 31 Machine 28

Cockpit 13, 23, 24 Coffee 17 Coffee grounds container 5 Cold Brew 17 Connecting an accessory 14 Connecting the Cool Control milk cooler 14 Contact details 40 Cup grille 5 Customer support 40

D Damage

Preventing damage 7 What to do in the event of damage 7

Declaration of Conformity 40 Descaling

Machine 29 Water tank 31

Display Cockpit 13 Touchscreen display 5, 10

Display messages 32 Disposal 35 Drip tray 5 Dual spout

Dismantling and cleaning 25 Height- and width-adjustable dual spout 5

E Emptying the system 35 Errors

Troubleshooting 33 Espresso 17 Espresso doppio 18 EU Declaration of Conformity 40

F Filling

Bean container 10 Water tank 21

Filter Changing 27 Inserting 27

Filter casing 5 First-time use 11 Flat white 17

G Ground coffee 19

Measuring spoon for ground coffee 5 Powder chute for ground coffee 5

Grounding point 36

12 Index

38

H Hotline 40 Hot water 20 Hot-water spout 5

I Instant coffee

Ground coffee 19 Interchangeable milk spout 36

J JURA

Contact details 40

L Latte macchiato 17

M Macchiato 17 Machine

Cleaning 28 Descaling 29 Rinsing 24 Setting up 10

Machine settings 23 Mains cable 5 Maintenance 24 Maintenance actions 22 Measuring spoon for ground coffee 5 Messages, display 32 Milk 18

Connecting milk 13 Milk foam 18 Milk system 36

Clean 24 Milk system rinsing 24

P Pot of coffee 18 Powder chute

Powder chute for ground coffee 5 Preparation 15, 17

Aroma Selection 16 Caff latte 17 Cappuccino 17 Coffee 17 Cold Brew 17 Espresso 17 Espresso doppio 18

Flat white 17 Ground coffee 19 Hot water 20 Latte macchiato 17 Lungo Barista 18 Macchiato 17 Milk 18 Milk foam 18 Pot of coffee 18 Speciality Selection 16

Problems Troubleshooting 33

Product settings Adjusting 20

Proper use 6

R RFID 36 Rinsing

Machine 24 Rotary Switch 5, 10

S Safety information 6 Service socket 5 Setting up

Setting up the machine 10 Smart Connect 14 Speciality Selection

Extra Shot 16 Ground coffee 16

Spout Height- and width-adjustable dual spout 5 Hot-water spout 5

Switching off 21 Switching on 21 Symbol description 6

T Technical data 36

Interchangeable milk spout 36 Milk system 36

Tel 40 Touchscreen display 5, 10 Transport 35 Troubleshooting 33

12 Index

39

U Use, First-time 11 Users 6

W Water hardness

Determining the water hardness 11 Water tank 5

Descaling 31 Filling 21

WiFi 36 WiFi Connect 5, 14 WiFi connection 14 Wireless connection 14, 27, 36

13 JURA contact details / Legal information

40

13 JURA contact details / Legal information

JURA Elektroapparate AG Kaffeeweltstrasse 10 CH-4626 Niederbuchsiten Tel +41 (0)62 38 98 233

E You can find additional contact details for your country at jura.com.

E If you need assistance with using your machine, you can find this at jura.com/service.

E Your opinion is important to us! Use the contact details at jura.com.

The machine complies with the following directives: U 2014/35/EU  Low Voltage Directive U 2014/30/EU  Electromagnetic Compatibility U 2009/125/EC  Ecodesign Directive U 2011/65/EU  RoHS Directive U 2014/53/EU

Manualsnet FAQs

If you want to find out how the Z10 Jura works, you can view and download the Jura Z10 Coffee Machine Instruction Manual on the Manualsnet website.

Yes, we have the Instruction Manual for Jura Z10 as well as other Jura manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a Jura Z10. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Jura Z10 Coffee Machine Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Jura Z10 Coffee Machine Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Jura Z10 Coffee Machine Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Jura Z10 Coffee Machine Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Jura Z10 Coffee Machine Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.