Contents

Jura Impressa J80 One Touch TFT Coffee Machine Instruction Manual PDF

1 of 50
1 of 50

Summary of Content for Jura Impressa J80 One Touch TFT Coffee Machine Instruction Manual PDF

de Wichtige Information zur Bedienungsanleitung Ihres neuen Kaffeespezialitten- Vollautomaten

Die beiliegende Bedienungsanleitung fr die IMPRESSA J9.3 gilt auch fr Ihre J80.

Genderter Lieferumfang: Die separate Heiwasserdse ist nicht im Lieferumfang enthalten. Kapitel Heiwasser: Sie knnen Heiwasser problemlos mit der Cappucino-Dse zuberei- ten. Die Zubereitung von Heiwasser funktioniert unabhngig von der verwendeten Dse.

en Important information about the instructions for use for your new automatic speciality coffee machine

The enclosed instructions for use for the IMPRESSA J9.3 also apply to the J80.

Change to equipment supplied as standard: The separate hot water nozzle is not supplied as standard. Hot water chapter: You can easily prepare hot water with the cappuccino frother. Hot water is prepared in the same way no matter whether you use the nozzle or the frother.

fr Information importante concernant le mode demploi de votre nouvelle machine automatique spcialits de caf

Le mode demploi ci-joint pour lIMPRESSA J9.3 est galement valable pour votre J80.

Modification du matriel fourni: La buse eau chaude spare nest pas fournie avec la machine. Chapitre Eau chaude : vous pouvez sans problme prparer de leau chaude avec la buse Cappuccino. La prparation deau chaude fonctionne indpendamment de la buse utilise.

it Informazioni importanti relative alle istruzioni per luso della Sua nuova macchina automatica per specialit di caff

Le allegate istruzioni per luso per lIMPRESSA J9.3 sono valide anche per la Sua J80.

Dotazione modificata: Lugello acqua calda separato non in dotazione. Capitolo Acqua calda: lacqua calda pu essere preparata senza problemi con lugello per cappuccino. La pre- parazione dellacqua calda funziona indipendentemente dallugello utilizzato.

J

nl Belangrijke informatie over de gebruiksaanwijzing van uw nieuwe volautomaat voor koffiespecialiteiten

De meegeleverde gebruiksaanwijzing voor de IMPRESSA J9.3 geldt ook voor uw J80.

Gewijzigde leveringsomvang: Het afzonderlijke heetwaterpijpje behoort niet tot de levering- somvang. Hoofdstuk Heet water: u kunt met de cappuccinatore probleemloos heet water bereiden. De bereiding van heet water werkt onafhankelijk van het gebruikte pijpje.

es Informacin importante para el modo de empleo de su nueva mquina automtica para especialidades de caf

Las instrucciones de servicio adjuntas para la IMPRESSA J9.3 tambin son vlidas para la J80.

Volumen de suministro modificado: El vaporizador de agua caliente separado no va incluido en el volumen de suministro. Captulo Agua caliente: usted podr preparar fcilmente agua caliente mediante el vaporizador Cappuccino. La preparacin de agua caliente funciona de forma independiente del vaporizador utilizado.

pt Informaes importantes sobre o manual de instrues da sua nova mquina de caf

O manual de instrues fornecido para a IMPRESSA J9.3 vlido tambm para a sua J80.

Alterao do material fornecido: O bocal da gua quente separado no faz parte do material fornecido. Captulo gua quente: com o bocal para cappuccino pode-se preparar gua quente sem problemas. A preparao de gua quente funciona independentemente do bocal utilizado.

sv Viktig information om bruksanvisningen till din nya helautomatiska kaffespecialitets- maskin

Den medfljande bruksanvisningen fr IMPRESSA J9.3 gller ven fr din J80.

ndrad leverans: Det separata varmvattenmunstycket ingr inte i leveransen. Kapitlet Varm- vatten: Varmvatten kan enkelt gras i ordning med cappuccino-skummare. Varmvatten kan gras i ordning oberoende av vilket munstycke som anvnds.

ru - -

IMPRESSA J9.3 J80.

: . : - . .

J7 17

51 /J8

0/ de

-r u/

20 16

02

IMPRESSA J9.3 One Touch TFT Instructions for Use

The Instructions for Use has been awarded the seal of

approval by the independent German Technical Inspection

Agency, TV SD, due to its easy-to-understand style, its

thoroughness and coverage of safety aspects.

2

Table of contents

Your IMPRESSA J9.3 One Touch TFT

Control elements 4 Important information 6

Proper use ......................................................................................................................................................6 For your safety ...............................................................................................................................................6

1 Preparing and using for the first time 10 JURA on the Internet ....................................................................................................................................10 Setting up the machine ..............................................................................................................................10 Filling the water tank ...................................................................................................................................10 Filling the bean container ...........................................................................................................................10 First-time use .................................................................................................................................................11 Inserting and activating the filter .............................................................................................................. 12 Determining and adjusting the water hardness ..................................................................................... 13 Adjusting the grinder ..................................................................................................................................15

2 Preparation 16 Ways of preparing a beverage ...................................................................................................................16 Espresso and coffee ..................................................................................................................................... 17 Preparing two speciality coffees ................................................................................................................ 17 Latte macchiato, cappuccino .....................................................................................................................18 Warm milk and milk foam ..........................................................................................................................19 Ground coffee ...............................................................................................................................................19 Permanently setting the amount of water for the cup size ................................................................20 Hot water .......................................................................................................................................................21

3 Daily operation 22 Switching on ................................................................................................................................................ 22 Daily maintenance ...................................................................................................................................... 22 Switching off ................................................................................................................................................ 23

4 Permanent settings in programming mode 24 Product settings ..........................................................................................................................................25 Maintenance settings .................................................................................................................................26 Energy-saving mode .................................................................................................................................. 27 Automatic switch-off ..................................................................................................................................28 Unit for amount of water ...........................................................................................................................29 Restore factory settings .............................................................................................................................29 Language ......................................................................................................................................................30 Colour scheme ..............................................................................................................................................31 Viewing information ....................................................................................................................................31

3

Table of contents

Warnings

J CAUTION J WARNING

Always take note of any information marked with the words CAUTION or WARNING and a warning sign. The signal word WARNING draws your attention to potential serious injury, and the signal word CAUTION to potential minor injury.

CAUTION CAUTION draws your attention to potential damage to the machine.

Symbols used

T Prompt to take action. This symbol means that you are being prompted to perform some action.

E Information and tips to make it even easier to use your IMPRESSA.

Espresso Display

Symbol description

5 Maintenance 32 Rinsing the machine ................................................................................................................................... 32 Rinsing the cappuccino frother ................................................................................................................ 33 Cleaning the cappuccino frother .............................................................................................................. 33 Dismantling and rinsing the cappuccino frother ..................................................................................34 Changing the filter ......................................................................................................................................34 Cleaning the machine ................................................................................................................................36 Descaling the machine .............................................................................................................................. 37 Cleaning the bean container .....................................................................................................................39 Descaling the water tank ...........................................................................................................................39

6 Display messages 40 7 Troubleshooting 41 8 Transport and environmentally friendly disposal 43

Transport / Emptying the system .............................................................................................................43 Disposal .........................................................................................................................................................43

9 Technical data 44 10 Index 45 11 JURA contact details / Legal information 48

4

Control elements

Control elements

1

4

2

3

7

6 15

9

14

5

8

10

11

12

13

1 Bean container cover 2 Water tank cover 3 Bean container with aroma preservation

cover 4 Water tank 5 Height-adjustable cappuccino frother 6 Coffee grounds container 7 Drip tray 8 Cup platform

9 Filler funnel for ground coffee 10 Storage compartment cover 11 Grinder adjustment switch 12 Hot-water nozzle 13 Measuring spoon for ground coffee 14 Height- and width-adjustable coffee spout 15 Power switch and mains cable

(side of machine)

5

Control elements

31 2

4

5

Top of the machine 1 Q On/Off button 2 g Rotary Switch 3 O P button (programming)

Front 4 Display 5 Buttons (button function depends on

what is shown in the display)

6

Important information

Important information

The machine is designed and intended for private domestic use. It should only be used for coffee preparation and to heat milk and water. Use for any other purpose will be deemed improper. JURA Ele- ktroapparate AG cannot accept any responsibility for the consequences of improper use.

Before using the machine read these instructions for use thoroughly and completely and comply with the instructions they contain. A warranty ser- vice is not applicable for damage or defects caused by non-compliance with the instructions for use. Keep these instructions for use close to the machine and pass them on to the next user.

Please carefully read and observe the important safety information set out below.

To avoid danger of potentially fatal electric shock: U Never use a machine which is damaged or has

a defective mains cable. U In the event of signs of damage, for example if

there is a smell of burning, unplug the machine immediately from the mains supply and con- tact JURA service.

U If the mains cable of this machine is damaged, it must be repaired either directly by JURA or by an authorised JURA service centre.

U Make sure that the IMPRESSA and the mains cable are not located close to hot surfaces.

U Be careful to ensure that the mains cable is not trapped and does not rub against sharp edges.

Proper use

For your safety

J

7

Important information

U Never open and repair the machine yourself. Do not modify the machine in any way that is not described in these instructions for use. The machine contains live parts. If opened, there is a danger of potentially fatal injury. Repairs may only be carried out by authorised JURA service centres, using original spare parts and accessories.

U To completely and safely disconnect the machine from the power supply, first switch off the IMPRESSA using the On/Off button and then at the power switch. Only then should you remove the mains plug from the power socket.

There is a risk of scalds or burns on the spouts and the cappuccino frother.

U Place the machine out of the reach of children. U Do not touch any hot parts. Use the handles

provided. U Ensure that the cappuccino frother is correctly

fitted and clean. If incorrectly fitted or if they become blocked, the cappuccino frother or its parts might come off.

A defective machine is not safe and could cause injury or fire. To avoid damage and any associated risk of injury or fire:

U Never allow the mains cable to loosely hang down. The mains cable could pose a tripping hazard or become damaged.

U Protect the IMPRESSA from environmental influences such as rain, frost and direct sun- light.

8

Important information

U Do not immerse the IMPRESSA, mains cable or connections in water.

U Do not put the IMPRESSA or any individual parts in the dishwasher.

U Switch your IMPRESSA off at the power switch before any cleaning operation. Always wipe the IMPRESSA with a damp cloth rather than a wet one, and protect it from prolonged expo- sure to water splash.

U Only connect the machine to the mains volt- age in accordance with the information on the rating plate. The rating plate is located on the underside of your IMPRESSA. Further technical data is provided in these instructions for use (see Chapter 9 Technical data).

U Please only use original JURA maintenance products. Use of products that are not explic- itly recommended by JURA could damage the IMPRESSA.

U Do not use any coffee beans treated with addi- tives or caramelised coffee beans.

U Only fill the water tank with fresh, cold water. U Switch the machine off at the power switch if

you are going to be absent for a longer period of time.

U Children may not clean or service the machine unless supervised by a responsible person.

U Do not allow children to play with the machine.

9

Important information

U Keep children under the age of 8 away from the machine, or supervise them constantly.

U Children aged 8 and over may only operate the machine without supervision if they have been instructed in how to use it safely. Chil- dren must be able to recognise and under- stand the potential dangers arising from incor- rect use.

People, including children, who U do not have the physical, sensory or mental

capabilities to use the machine safely or U are inexperienced or lack knowledge in how to

use the machine safely must be supervised by a responsible person when using it, or must be instructed in how to use it cor- rectly.

Safety when handling the CLARIS Blue filter car- tridge:

U Filter cartridges should be kept out of the reach of children.

U Store filter cartridges in a dry place in the sealed packaging.

U Protect cartridges from heat and direct sun- light.

U Do not use damaged filter cartridges. U Do not open filter cartridges.

10

1 Preparing and using for the first time

1 Preparing and using for the first time

Visit us on the Internet. You can download short operating instruc- tions for your machine from the JURA website (www.jura.com). You will also find interesting and up-to-date information on your IMPRESSA and on every aspect of coffee.

When setting up your IMPRESSA, please note the following:

U Place the IMPRESSA on a horizontal surface that is not sensi- tive to water.

U Choose a spot for your IMPRESSA which protects the machine against overheating. Ensure that the ventilation slots are not covered.

To enjoy the perfect cup of coffee we recommend changing the water every day.

Milk, sparkling mineral water or other liquids can damage the water tank or the machine.

T Only fill the water tank with fresh, cold water.

T Open the water tank cover. T Remove the water tank and rinse it with cold water. T Fill the water tank with fresh, cold water and reinsert the

tank. T Close the water tank cover.

The bean container has an aroma preservation cover. This will ensure that your coffee beans retain their aroma for longer.

Coffee beans which have been treated with additives (e.g. sugar), ground coffee or freeze-dried coffee will damage the grinder.

T Only use untreated coffee beans to fill the bean container.

T Open the bean container cover and remove the aroma pres- ervation cover.

JURA on the Internet

Setting up the machine

Filling the water tank

CAUTION

Filling the bean container

CAUTION

11

1 Preparing and using for the first time

T Remove any dirt or foreign objects from inside the bean container.

T Fill the bean container with coffee beans, then close the aroma preservation cover and the bean container cover.

If the machine is operated with a defective mains cable, there is a danger of potentially fatal electric shock.

T Never use a machine which is damaged or has a defective mains cable.

Precondition: The water tank and bean container have been filled. T Insert the mains plug into a power socket.

3 T Switch on the IMPRESSA using the power switch on the right-hand side of the machine.

Q T Press the On/Off button to switch the IMPRESSA on. The JURA logo appears. The display then shows the lan- guages you can choose from.

E To display more languages, press the Next button (bottom right).

T Press the button that corresponds to the language you want, e.g. English. Saved appears briefly on the display to confirm the setting. Please press the Rotary Switch., the Rotary Switch lights up.

T Place a receptacle under the cappuccino frother. k T Press the Rotary Switch.

System is filling., the system fills up with water. The opera- tion stops automatically. Please press the Rotary Switch.

First-time use

J WARNING

12

1 Preparing and using for the first time

T Place a receptacle under the coffee spout. k T Press the Rotary Switch.

Machine is rinsing., the machine rinses. The operation stops automatically. Please select product: appears on the display. The IMPRESSA is now ready for use.

E The display shows the products you can prepare.

Your IMPRESSA no longer has to be descaled if you are using the CLARIS Blue filter cartridge. If the water hardness is 10 dH or more, we recommend using the filter cartridge.

E If you do not know the hardness of your water, you must find this out first (see Chapter 1 Preparing and using for the first time Determining the water hardness).

E Perform the inserting the filter operation without any inter- ruptions. This will ensure that your IMPRESSA always produces its best.

Precondition: Please select product: is displayed. O T Press the P button.

Maintenance status (1/6) g T Turn the Rotary Switch until the programme item

Maintenance settings (3/6) is displayed. T Press the Filter button.

Filter T Press the Active button. T Press the Save button.

Saved appears briefly on the display. Insert filter

T Remove the filter cartridge extension from the Welcome Pack.

T Fit the filter extension on top of a CLARIS Blue filter cartridge. T Remove and empty the water tank.

Inserting and activating the filter

13

1 Preparing and using for the first time

T Open the filter holder and insert the filter cartridge into the water tank, exerting slight pressure.

T Close the filter holder. It will click into place audibly.

E After two months, the filter will cease to work. You can check the elapsed time by referring to the date plate on the filter holder in the water tank.

T Fill the water tank with fresh, cold water and reinsert the tank.

T Place a receptacle (at least 500 ml) under the cappuccino frother.

T Press the Next button. Filter is being rinsed., water flows out of the cappuccino frother.

E You can interrupt rinsing of the filter at any time by pressing any button. Press the Rotary Switch k to continue rinsing of the filter.

E The water may be slightly discoloured. This is not harmful to health and does not affect the taste.

Rinsing of the filter stops automatically after approximately 500 ml. The machine heats up. Please select product: appears on the display. The filter is now activated.

E If you are using the CLARIS Blue filter cartridge and have acti- vated it in programming mode, you will not be able to adjust the water hardness.

The harder the water is, the more frequently the IMPRESSA needs to be descaled. It is therefore important to adjust the water hardness.

The water hardness can be adjusted on a continuous scale between 1 dH and 30 dH.

Determining and adjusting the water hardness

14

1 Preparing and using for the first time

You can find out what the water hardness is by using the Aquadur test strip supplied as standard.

T Hold the test strip briefly (for 1 second) under flowing water. Shake off the water.

T Wait for about one minute. T You will then be able to read the degree of water hardness

from the discolouration of the Aquadur test strip and the description on the packaging. You can now adjust the water hardness.

Precondition: Please select product: is displayed. O T Press the P button.

Maintenance status (1/6) g T Turn the Rotary Switch until the programme item

Maintenance settings (3/6) is displayed. T Press the Water hardness button.

Water hardness T Press the < or > button to set the water hardness. T Press the Save button.

Saved appears briefly on the display to confirm the setting. Maintenance settings (3/6)

O T Press the P button to exit programming mode. Please select product:

Determining the water hardness

Adjusting the water hardness

15

1 Preparing and using for the first time

You can adjust the grinder on a continuous scale to suit the degree of roast of your coffee.

If you adjust the consistency of grind when the grinder is not oper- ating, the grinder adjustment switch could be damaged.

T Only adjust the consistency of grind when the grinder is run- ning.

The consistency of grind setting is correct if the coffee flows regu- larly from the coffee spout. In addition a fine, thick crema forms.

Example: Proceed as follows to change the consistency of grind during the preparation of an espresso.

T Open the storage compartment cover. T Place a cup under the coffee spout. T Press the Espresso button.

The grinder starts up. Espresso is displayed. T Turn the grinder adjustment switch to the desired position

while the grinder is running. The espresso is prepared and the consistency of grind is adjusted.

T Close the storage compartment cover.

Adjusting the grinder

CAUTION

16

2 Preparation

2 Preparation

E You can stop preparation of a speciality coffee, speciality cof- fee with milk or hot water at any time. Just press any button.

E During the grinding operation you can select the coffee strength of individual products by turning the Rotary Switch g: ; (extra-mild), ;; (mild), ;;; (normal), ;;;; (strong) or ;;;;; (extra-strong).

E During preparation, you can change the preset amount of water by turning the Rotary Switch g or pressing the < and > buttons.

E You can follow the current status of preparation on the display.

You can make permanent settings for all products in programming mode (see Chapter 4 Permanent settings in programming mode Product settings).

Only some of the speciality coffees you can prepare are shown on the display at any one time. As soon as you turn the Rotary Switch, more speciality coffees are displayed in the product selector. The product selector disappears automatically after 5 seconds if no preparation is started.

The following speciality coffees are displayed as standard:

U Espresso

U Coffee

U Cappuccino

U Latte macchiato

U Hot water

U 1 portion milk

Additional speciality coffees in the product selector:

U Ristretto

U 2 espressi

U 2 coffees

U 2 ristretti

Ways of preparing a beverage

17

2 Preparation

Espresso and Coffee are prepared following this model.

Example: Proceed as follows to prepare one coffee. T Place a cup under the coffee spout. T Press the Coffee button.

Preparation will now begin. The preset amount of water for coffee flows into the cup. Preparation stops automatically and Please select product: appears on the display.

To prepare two speciality coffees, either use the product selector or press the appropriate preparation button twice.

Example: Proceed as follows to prepare two coffees (using product selector).

T Place two cups under the coffee spout. g T Turn the Rotary Switch to view the product selector. g T Turn the Rotary Switch until 2 coffees is displayed. k T Press the Rotary Switch.

Preparation starts and the preset amount of water for coffee flows into the cups. Preparation stops automatically and Please select product: appears on the display.

E Proceed as follows to prepare two cups of coffee at the touch of a button: Place two cups under the coffee spout. Press the Coffee button twice (within two seconds) to start coffee preparation.

Espresso and coffee

Preparing two speciality coffees

18

2 Preparation

Your IMPRESSA can prepare a latte macchiato or cappuccino at the touch of a button. There is no need to move the glass or cup.

Example: Proceed as follows to prepare one latte macchiato. T Remove the protective cover from the cappuccino frother. T Attach the milk pipe to the cappuccino frother. Use the long

pipe for a milk carton and the short pipe for a milk container. T Insert the other end of the milk pipe into a milk carton or

connect it to a milk container.

T Place a glass under the cappuccino frother. T Turn the setting wheel of the cappuccino frother to the Milk

Foam position . T Press the Latte macchiato button.

Latte macchiato, the milk foam is prepared. Preparation stops automatically when the preset amount of milk is reached.

E There is a short interval while the hot milk separates from the milk foam. This allows the typical layers of a latte macchiato to form. You can choose the length of this interval in program- ming mode (see Chapter 4 Permanent settings in program- ming mode Product settings).

Coffee preparation starts. The preset amount of water flows into the glass. Preparation stops automatically and Please select product: appears on the display.

To make sure the cappuccino frother always works properly, rinse and clean it regularly (see Chapter 5 Maintenance Rinsing the cap- puccino frother).

Latte macchiato, cappuccino

19

2 Preparation

Example: Proceed as follows to prepare milk foam. T Remove the protective cover from the cappuccino frother. T Attach the milk pipe to the cappuccino frother. Use the long

pipe for a milk carton and the short pipe for a milk container. T Insert the other end of the milk pipe into a milk carton or

connect it to a milk container.

T Place a cup under the cappuccino frother. T Turn the setting wheel of the cappuccino frother to the Milk

Foam position .

E If you want to heat the milk turn the setting wheel of the cap- puccino frother to the Milk position z.

T Press the 1 portion milk button. 1 portion milk As soon as the machine has heated up, Please select pro- duct: appears.

T Press the 1 portion milk button again. 1 portion milk, the milk foam is prepared. Preparation stops automatically when the preset amount of milk is reached. Please select product: appears on the display.

To make sure the cappuccino frother always works properly, rinse and clean it regularly (see Chapter 5 Maintenance Rinsing the cap- puccino frother).

You can choose to use a second coffee variety, for example decaf- feinated coffee, with the filler funnel for ground coffee.

E Never add more than two level measuring spoons of ground coffee.

E Use ground coffee which is not ground too finely. Very fine coffee can block up the system so that the coffee only comes out in drips.

E If you did not fill the machine with a sufficient amount of ground coffee, Not enough ground coffee is displayed and the IMPRESSA stops the operation.

Warm milk and milk foam

Ground coffee

20

2 Preparation

E The desired speciality coffee must be prepared within approx- imately one minute after filling with the ground coffee. Oth- erwise the IMPRESSA stops the operation and is once more ready for use.

All speciality coffees with ground coffee are prepared following this model.

Example: Proceed as follows to prepare one espresso using ground coffee.

T Place an espresso cup under the coffee spout. T Open the cover of the filler funnel for ground coffee.

Please add ground coffee. T Place one level measuring spoon of ground coffee into the

filler funnel. T Close the cover of the filler funnel.

Please select product: T Press the Espresso button.

Preparation will now begin. The preset amount of water for espresso flows into the cup. Preparation stops automatically and Please select product: appears on the display.

It is easy to make permanent settings for the amount of water for all speciality coffees and hot water according to the cup size. Adjust the amount once as shown in the following example. Every time you prepare a drink in the future, this amount of water will be dispensed.

The permanent settings for adapting the amount of water to the cup size for all speciality coffees and hot water follow this model.

Example: Proceed as follows to permanently set the amount of water for one coffee. Precondition: Please select product: is displayed.

T Place a cup under the coffee spout. T Press and hold the Coffee button.

Coffee and the fill volume are displayed. T Hold the Coffee button down until Enough water? Press

button appears. T Release the Coffee button.

Preparation starts and the coffee flows into the cup.

Permanently setting the amount of water for the cup size

21

2 Preparation

T Press any button as soon as there is sufficient coffee in the cup. Preparation stops. Saved appears briefly on the display. The set amount of water for one coffee is permanently stored. Please select product: appears on the display.

E You can alter this setting at any time by repeating the above procedure.

E You can also permanently set the amount for all speciality cof- fees and hot water in programming mode (see Chapter 4 Per- manent settings in programming mode Product settings).

To obtain a perfect water flow, use the hot-water nozzle. You can find the hot-water nozzle under the cover of the storage compartment.

The following temperatures can be selected for preparing hot water: Low, Normal, X high.

There is a danger of scalding from hot water splashes. T Avoid direct contact with the skin.

T Carefully pull the cappuccino frother down and off. T Open the storage compartment cover, take out the hot-

water nozzle and close the cover again. T Attach the hot-water nozzle to the connector. T Place a cup under the hot-water nozzle. T Press the Hot water button.

Hot water and the temperature are displayed.

E By pressing the < or > button several times (within appro- ximately 2 seconds) you can set the temperature to your indi- vidual preference. This setting is not saved.

Hot water, hot water flows into the cup. Preparation stops automatically and Please select product: appears on the display.

Hot water

J CAUTION

22

3 Daily operation

3 Daily operation

When the IMPRESSA is switched on, it automatically prompts you to perform the rinse operation. Start the rinse operation by pressing the Rotary Switch k. In programming mode you can change this setting so that the machine starts the switch-on rinse automatically.

Precondition: Your IMPRESSA is switched on at the power switch. T Place a receptacle under the coffee spout.

Q T Press the On/Off button to switch the IMPRESSA on. Welcome to JURA appears on the display. The machine heats up. Please press the Rotary Switch.

k T Press the Rotary Switch. The machine rinses. The operation stops automatically and Please select product: appears on the display.

To ensure that you get many years of reliable service out of your IMPRESSA and to guarantee the optimum coffee quality, the machine requires daily maintenance.

T Pull out the drip tray. T Empty the coffee grounds container and the drip tray. Rinse

them both with warm water. T Dry the metal contacts on the back of the drip tray. T Refit the coffee grounds container and the drip tray. T Rinse the water tank with clean water. T Dismantle and rinse the cappuccino frother (see Chapter 5

Maintenance Rinsing the cappuccino frother). T Wipe the surface of the machine with a clean, soft, damp

cloth (e.g. microfibre cloth).

Switching on

Daily maintenance

23

3 Daily operation

When you switch your IMPRESSA off, the spouts used to prepare a speciality coffee or milk are rinsed.

T Place one receptacle under the coffee spout and another under the cappuccino frother.

Q T Press the On/Off button. Machine is rinsing., Milk system is being rinsed.. The spouts used to prepare a speciality coffee or milk are rinsed. The operation stops automatically and your IMPRESSA is switched off.

E When the IMPRESSA is switched off with the On/Off button, the machine consumes less than 0.1 W of standby energy. The machine can be completely disconnected from the power supply using the power switch.

Switching off

24

4 Permanent settings in programming mode

4 Permanent settings in programming mode

Press the P button to enter programming mode. You can navigate through the programme items and permanently save the required settings simply by turning the Rotary Switch and using the variable buttons. The following settings can be made:

Programme item Sub-item Explanation

Maintenance status (1/6)

Clean, Descale (only if filter is not activated), Change the filter (only if filter is activated), Rinse the coffee system, Clean the milk system

T Start the required maintenance programme here.

Product settings (2/6) Expert mode T Select your settings for speciality coffees and hot water.

Maintenance settings (3/6)

Filter, Water hardness (only if filter is not activated), Rinse the coffee system, Rinse the milk system

T Indicate whether you are operating your IMPRESSA with or without a CLARIS Blue filter cartridge. T Adjust the water hardness. T Change the settings for the switch-on rinse and milk system rinse.

Machine settings 1 (4/6) Save energy, Switch off after, Units, Factory setting

T Select an energy-saving mode. T Set the time after which the IMPRESSA should switch off automatically. T Select the unit for the amount of water. T Reset the permanently set values of all products to the factory settings.

Machine settings 2 (5/6) Choose language, Display, Colour scheme

T Select your language and the back- ground colour for the display.

Information (6/6) Product counter, Maintenance counter, Version

T Keep track of all speciality coffees prepared and view the number of maintenance programmes performed.

25

4 Permanent settings in programming mode

In the programme item Product settings (2/6) you can make indi- vidual settings for all speciality coffees and hot water. The following settings can be made:

Product Temperature Coffee strength Amount

Ristretto, espresso, coffee

Normal, High extra-mild ;, mild ;;, normal ;;;, strong ;;;;, extra-strong ;;;;;

Volume: 25 ml 240 ml

Two ristretti, two espressi, two coffees

Normal, High Volume: 25 ml 240 ml (per cup)

Latte macchiato, cappuccino

Normal, High extra-mild ;, mild ;;, normal ;;;, strong ;;;;, extra-strong ;;;;;

Amount of milk: 3 sec. 120 sec. Interval: 0 sec. 60 sec. Volume: 25 ml 240 ml

Milk portion 3 sec. 120 sec.

Hot water Low, Normal, X high

25 ml 450 ml

Example: Proceed as follows to change the amount of milk for a latte macchiato from 16 sec. to 20 sec., the interval from 30 sec. to 40 sec. and the amount of water from 45 ml to 40 ml. Precondition: Please select product: is displayed. O T Press the P button.

Maintenance status (1/6) g T Turn the Rotary Switch until the programme item Product

settings (2/6) is displayed. T Press the Expert mode button.

Expert mode

E Next select the button of the product for which you would like to make settings. No product is prepared at this point.

T Press the Latte macchiato button. Latte macchiato

T Press the Amount of milk button. T Press the < or > button to change setting for the amount

of milk to 20 sec..

Product settings

26

4 Permanent settings in programming mode

T Press the Save button. Saved appears briefly on the display.

T Press the Volume button. T Press the < or > button to change setting for the fill vol-

ume to 40 ml. T Press the Save button.

Saved appears briefly on the display. T Press the Next button. T Press the Interval button. T Press the < or > button to change setting for the interval

to 40 sec.. T Press the Save button.

Saved appears briefly on the display. Latte macchiato

O T Press the P button to exit programming mode. Please select product:

In the programme item Maintenance settings (3/6) you can make the following settings:

U Filter

U Activate the CLARIS Blue filter cartridge (see Chapter 1 Pre- paring and using for the first time Inserting and activating the filter).

U Water hardness

U If you do not have a filter cartridge, you will need to set the water hardness (see Chapter 1 Preparing and using for the first time Adjusting the water hardness).

U Rinse the coffee system / Manual

U The switch-on rinse must be started manually.

U Rinse the coffee system / Automatic

U The switch-on rinse is started automatically.

U Rinse the milk system / After 10 min.

U You are prompted to rinse the milk system 10 minutes after preparation of a speciality coffee with milk.

U Rinse the milk system / Immediate

U You are prompted to rinse the milk system immediately after preparation of a speciality coffee with milk.

Maintenance settings

27

4 Permanent settings in programming mode

Example: Proceed as follows to make the machine prompt you to rinse the milk system immediately after preparing a speciality cof- fee with milk. Precondition: Please select product: is displayed. O T Press the P button.

Maintenance status (1/6) g T Turn the Rotary Switch until the programme item Mainte-

nance settings (3/6) is displayed. T Press the Rinse the milk system button.

Rinse the milk system T Press the Immediate button. T Press the Save button.

Saved appears briefly on the display. Maintenance settings (3/6)

O T Press the P button to exit programming mode. Please select product:

In the programme item Machine settings 1 (4/6) / Save energy you can permanently set an energy-saving mode (Energy Save Mode, E.S.M.):

U Inactive

U All speciality coffees, speciality coffees with milk and hot water can be prepared without having to wait.

U Before milk preparation, the machine heats up.

U Active (Energy saving of up to 40%)

U Soon after the last preparation, the IMPRESSA stops heating up. As soon as the energy-saving temperature is reached, this is indicated in the display by the message Save energy this may take several minutes.

U The machine heats up before coffee, hot water or milk prep- aration.

Example: Proceed as follows to change the energy-saving mode from Inactive to Active. Precondition: Please select product: is displayed. O T Press the P button.

Maintenance status (1/6)

Energy-saving mode

28

4 Permanent settings in programming mode

g T Turn the Rotary Switch until the programme item Machine settings 1 (4/6) is displayed.

T Press the Save energy button. Save energy

T Press the Active button. T Press the Save button.

Saved appears briefly on the display. Machine settings 1 (4/6)

O T Press the P button to exit programming mode. Please select product:

By instructing your IMPRESSA to automatically switch itself off, you can cut down your energy consumption. If this function is activated, your IMPRESSA switches off automatically after the preset time fol- lowing the last action on the machine.

You can set the automatic switch-off time to 15 minutes or 0.5 15 hours.

Precondition: Please select product: is displayed. O T Press the P button.

Maintenance status (1/6) g T Turn the Rotary Switch until the programme item Machine

settings 1 (4/6) is displayed. T Press the Switch off after button.

Switch off after T Press the < or > button to change the setting. T Press the Save button.

Saved appears briefly on the display. Machine settings 1 (4/6)

O T Press the P button to exit programming mode. Please select product:

Automatic switch-off

29

4 Permanent settings in programming mode

You can change the unit for the amount of water from ml to oz.

Example: Proceed as follows to change the unit for the amount of water from ml to oz. Precondition: Please select product: is displayed. O T Press the P button.

Maintenance status (1/6) g T Turn the Rotary Switch until the programme item Machine

settings 1 (4/6) is displayed. T Press the Units button.

Units T Press the oz button. T Press the Save button.

Saved appears briefly on the display. Machine settings 1 (4/6)

O T Press the P button to exit programming mode. Please select product:

In the programme item Machine settings 1 (4/6) / Factory setting you can reset various settings to their factory settings:

U Machine

U All customer settings (apart from the filter) are reset to factory settings. Your IMPRESSA then switches off.

U Products

U The settings (amount of water, aroma, temperature etc.) for any product can be reset individually to the factory settings. The corresponding double product is also reset to the fac- tory settings at the same time.

U All products

U The settings (amount of water, aroma, temperature etc.) for all products are reset to the factory settings.

U Display

U All display settings are reset to the factory settings.

Example: Proceed as follows to reset the values for Espresso to the factory settings. Precondition: Please select product: is displayed. O T Press the P button.

Maintenance status (1/6)

Unit for amount of water

Restore factory settings

30

4 Permanent settings in programming mode

g T Turn the Rotary Switch until the programme item Machine settings 1 (4/6) is displayed.

T Press the Factory setting button. Factory setting

T Press the Products button. T Press the Espresso button.

Espresso / Reset this product to the factory setting? T Press the Next button.

Saved appears briefly on the display. Factory setting

O T Press the P button to exit programming mode. Please select product:

In this programme item you can set the language used by your IMPRESSA.

E If you choose the wrong language by mistake, you can easily reset the machine to English: Press the P button to enter pro- gramming mode. Use the Rotary Switch g to select pro- gramme item 5/6 and then press the top left-hand button.

Example: Proceed as follows to change the language from English to Deutsch. Precondition: Please select product: is displayed. O T Press the P button.

Maintenance status (1/6) g T Turn the Rotary Switch until the programme item Machine

settings 2 (5/6) is displayed. T Press the Choose language button.

Choose language T Press the Deutsch button.

Gespeichert appears briefly on the display. Gerteeinstellungen 2 (5/6)

O T Press the P button to exit programming mode. Bitte whlen Sie Ihr Produkt:

Language

31

4 Permanent settings in programming mode

In this programme item you can set the background colour for the display of your IMPRESSA.

Precondition: Please select product: is displayed. O T Press the P button.

Maintenance status (1/6) g T Turn the Rotary Switch until the programme item Machine

settings 2 (5/6) is displayed. T Press the Colour scheme button.

Colour scheme T Press the < or > button to change the setting. T Press the Save button.

Saved appears briefly on the display. Machine settings 2 (5/6)

O T Press the P button to exit programming mode. Please select product:

E The selected background colour only applies on the selection page of the display showing the speciality coffees.

In the programme item Information (6/6) you can view the follow- ing information:

U Product counter: Number of prepared speciality coffees, speciality coffees with milk and hot water

U Maintenance counter: Maintenance status and number of maintenance programmes performed (cleaning, descaling, changing the filter)

U Version: Software version

Precondition: Please select product: is displayed. O T Press the P button.

Maintenance status (1/6) g T Turn the Rotary Switch until the programme item Informa-

tion (6/6) is displayed. T Press the Product counter button.

The number of speciality coffees prepared is displayed. T Press the button.

Information (6/6) O T Press the P button to exit programming mode.

Please select product:

Colour scheme

Viewing information

32

5 Maintenance

5 Maintenance

Your IMPRESSA has the following integrated maintenance pro- grammes:

U Rinsing the machine (Rinse the coffee system)

U Rinsing the cappuccino frother (Rinse the milk system)

U Cleaning the cappuccino frother (Clean the milk system)

U Changing the filter (Change the filter)

U Cleaning the machine (Clean)

U Descaling the machine (Descale)

E Clean or descale the machine, rinse the milk system or change the filter when you are prompted to do so.

E Press the P button to view a list of the maintenance pro- grammes (Maintenance status (1/6)). By referring to the bar you can see how soon each maintenance programme is due. When the bar is completely filled with red, the IMPRESSA will prompt you to perform the maintenance programme.

E The IMPRESSA will not prompt you to clean the milk system. In the interests of hygiene, you should clean the milk system daily when you have been preparing milk.

You can initiate the rinse operation manually at any time.

Precondition: Please select product: is displayed. T Place a receptacle under the coffee spout.

O T Press the P button. Maintenance status (1/6)

T Press the Rinse the coffee system button. Machine is rinsing., water flows out of the coffee spout. The rinse stops automatically and Please select product: appears on the display.

Rinsing the machine

33

5 Maintenance

After each milk preparation, the IMPRESSA prompts you to rinse the milk system.

Precondition: Rinse the milk system is displayed. T Place a receptacle under the cappuccino frother.

k T Press the Rotary Switch. Milk system is being rinsed., water flows out of the cappuc- cino frother. The rinse stops automatically and Please select product: appears on the display.

To ensure that the cappuccino frother always works properly, you should clean it daily when you have been preparing milk. Your IMPRESSA will not prompt you to clean the cappuccino frother.

If the wrong cleaning agent is used, the machine could be damaged and/or traces could be left behind in the water.

T Use only original JURA maintenance products.

E JURA Cappuccino Cleaner is available from stockists.

Precondition: Please select product: is displayed. O T Press the P button.

Maintenance status (1/6) T Press the Clean the milk system button.

Cleaning agent for milk system T Pour 250 ml of fresh water into a receptacle and add one

capful (max. 15 ml) of Cappuccino Cleaner. T Immerse the milk pipe in the receptacle. T Turn the setting wheel of the cappuccino frother to the Milk

Foam or Milk z position. T Place another receptacle under the cappuccino frother. T Press the Next button.

Milk system is being cleaned., water flows out of the cap- puccino frother. Water for cleaning milk system

T Rinse the receptacle thoroughly, fill it with 250 ml of fresh water and immerse the milk pipe in the water.

Rinsing the cappuccino frother

Cleaning the cappuccino frother

CAUTION

34

5 Maintenance

T Empty the other receptacle and place it under the cappuc- cino frother again.

T Press the Next button. Milk system is being cleaned., the cappuccino frother and the pipe are rinsed with fresh water. Please select product: appears on the display.

T Carefully pull the cappuccino frother down and off. T Dismantle the cappuccino frother into its individual parts. T Rinse all parts of the cappuccino frother thoroughly under

running water. T Reassemble the cappuccino frother.

E Ensure that all individual parts are correctly and firmly con- nected to ensure correct operation of the cappuccino frother.

T Firmly attach it to the connector.

E After 50 litres of water have flowed through, the filter will cease to work. Your IMPRESSA will automatically prompt you to change the filter.

E After two months, the filter will cease to work. You can check the elapsed time by referring to the date plate on the filter holder in the water tank.

E If the CLARIS Blue filter cartridge is not activated in program- ming mode, you will not be prompted to change the filter.

Precondition: Change filter is displayed. O T Press the P button.

Maintenance status (1/6) T Press the Change the filter button.

Change the filter

E If you do not want to start changing the filter just yet, press the button. The prompt Change filter remains active.

Dismantling and rinsing the cappuccino frother

Changing the filter

35

5 Maintenance

T Press the Next button. Change filter

T Remove and empty the water tank. T Open the filter holder and remove the old CLARIS Blue filter

cartridge and filter extension. T Fit the filter extension on top of a new filter cartridge. T Insert the filter cartridge into the water tank, exerting slight

pressure. T Close the filter holder. It will click into place audibly. T Fill the water tank with fresh, cold water and reinsert the

tank.

T Place a receptacle (at least 500 ml) under the cappuccino frother.

T Turn the setting wheel of the cappuccino frother to the Steam position n.

T Press the Next button. Filter is being rinsed., water flows out of the cappuccino frother.

E You can interrupt rinsing of the filter at any time by pressing any button. Press the Rotary Switch k to continue rinsing of the filter.

E The water may be slightly discoloured. This is not harmful to health and does not affect the taste.

Rinsing of the filter stops automatically after approximately 500 ml. The machine heats up. Please select product: appears on the display.

36

5 Maintenance

After 200 preparations or 80 switch-on rinses, the IMPRESSA will prompt you to clean it.

If the wrong cleaning agent is used, the machine could be damaged and/or traces could be left behind in the water.

T Use only original JURA maintenance products.

E The cleaning programme lasts approximately 20 minutes. E Do not interrupt the cleaning programme. The quality of

cleaning will be impaired if you do so. E JURA cleaning tablets are available from stockists.

Precondition: Clean machine is displayed. O T Press the P button.

Maintenance status (1/6) T Press the Clean button.

Clean

E If you do not want to start cleaning just yet, press the but- ton. The prompt Clean machine remains active.

T Press the Next button. Empty coffee grounds container

T Empty the drip tray and coffee grounds container and put them back into the machine. Please press the Rotary Switch.

T Place one receptacle under the coffee spout and another under the cappuccino frother.

k T Press the Rotary Switch. Machine is being cleaned., water flows out of the coffee spout. The operation is interrupted, Add cleaning tablet.

T Open the cover of the filler funnel for ground coffee. T Insert a JURA cleaning tablet into the filler funnel. T Close the cover of the filler funnel.

Please press the Rotary Switch.

Cleaning the machine

CAUTION

37

5 Maintenance

k T Press the Rotary Switch. Machine is being cleaned., water flows repeatedly out of the coffee spout and the cappuccino frother. The operation is interrupted, Empty coffee grounds con- tainer.

T Empty the drip tray and coffee grounds container and put them back into the machine. Cleaning is now complete. The IMPRESSA is once more ready for use.

The IMPRESSA builds up deposits of limescale over time and auto- matically prompts you to descale it when necessary. The degree of calcification depends on the hardness of your water.

If the descaling agent comes into contact with the skin or eyes, this can cause irritation.

T Avoid contact with the skin or eyes. T Rinse off descaling agent with clean water. Should you get any

descaling agent in your eye, see a doctor.

If the wrong descaling agent is used, the machine could be dam- aged and/or traces could be left behind in the water.

T Use only original JURA maintenance products.

If the descaling operation is interrupted, there may be damage to the machine.

T Allow the descaling programme to run to the end.

If the descaling agent comes into contact with sensitive surfaces (e.g. marble), damage cannot be ruled out.

T Clean up any splashes immediately.

E The descaling programme lasts approximately 45 minutes. E JURA descaling tablets are available from stockists. E If you use a CLARIS Blue filter cartridge and this is activated,

you will not be prompted to descale.

Descaling the machine

J CAUTION

CAUTION

CAUTION

CAUTION

38

5 Maintenance

Precondition: Decalcify machine is displayed. O T Press the P button.

Maintenance status (1/6) T Press the Descale button.

Descale

E If you do not want to start descaling just yet, press the but- ton. The prompt Decalcify machine remains active.

T Press the Next button. Empty drip tray

T Empty the drip tray and coffee grounds container and put them back into the machine. Pour descaling agent into water tank.

T Remove and empty the water tank. T Completely dissolve the contents of one blister (three JURA

descaling tablets) in a receptacle holding 500 ml of water. This may take several minutes.

T Pour the solution into the empty water tank and insert it into the machine. Please press the Rotary Switch.

T Remove the cappuccino frother. T Place a receptacle (at least 500 ml) under the connector of

the cappuccino frother. k T Press the Rotary Switch.

Machine is being descaled., water flows repeatedly out of the connector of the cappuccino frother. The operation stops automatically, Empty drip tray.

T Empty the receptacle under the connector of the cappuc- cino frother.

T Empty the drip tray and coffee grounds container and put them back into the machine. Fill water tank

T Remove the water tank and rinse it thoroughly. T Fill the water tank with fresh, cold water and reinsert the

tank. Please press the Rotary Switch.

T Refit the cappuccino frother.

39

5 Maintenance

T Place a receptacle under the cappuccino frother and another under the coffee spout.

k T Press the Rotary Switch. Machine is being descaled., water flows out of the cappuc- cino frother and the coffee spout. Machine is heating., Machine is rinsing., water flows out of the coffee spout. The operation stops automatically, Empty drip tray.

T Empty the drip tray and coffee grounds container and put them back into the machine. Descaling is now complete. The IMPRESSA is once more ready for use.

E If the descaling operation stops unexpectedly, rinse the water tank thoroughly.

Coffee beans may be covered with a slight oil film which remains on the walls of the bean container. These traces may negatively affect the coffee result. For this reason clean the bean container from time to time.

Precondition: Fill bean container is displayed. Q T Switch the machine off with the On/Off button. 3 T Switch the machine off at the power switch.

T Open the bean container cover and remove the aroma pres- ervation cover.

T Clean the bean container with a soft, dry cloth. T Fill the bean container with coffee beans, then close the

aroma preservation cover and the bean container cover.

Limescale deposits may form in the water tank. To ensure correct function of the machine, descale the water tank from time to time.

T Remove the water tank. T If you use a CLARIS Blue filter cartridge, remove this. T Descale the tank with a mild conventional descaling agent

in accordance with the manufacturer's instructions. T Rinse out the water tank thoroughly. T If you use a CLARIS Blue filter cartridge, insert this again. T Fill the water tank with fresh, cold water and reinsert the tank.

Cleaning the bean container

Descaling the water tank

40

6 Display messages

6 Display messages

Message Cause/Result Action

Fill water tank The water tank is empty. You cannot prepare any products.

T Fill the water tank (see Chapter 1 Preparing and using for the first time Filling the water tank).

Empty coffee grounds contai- ner

The coffee grounds container is full. You cannot prepare any products.

T Empty the coffee grounds container and the drip tray (see Chapter 3 Daily operation Daily maintenance).

Empty drip tray The drip tray is full. You cannot prepare any products.

T Empty the drip tray. T Clean and dry the metal contacts on the back of the drip tray.

Drip tray not fitted

The drip tray is not inserted correctly or is not inserted at all. You cannot prepare any products.

T Fit the drip tray.

Please press the Rotary Switch.

The IMPRESSA is prompting you to perform a rinse or continue a maintenance programme that was already started.

T Press the Rotary Switch to start the rinse or to continue the maintenance programme.

Fill bean container

The bean container is empty. You cannot prepare any products.

T Fill the bean container (see Chapter 1 Preparing and using for the first time Filling the bean container).

Rinse the milk system

The IMPRESSA is prompting you to rinse the milk system.

T Press the Rotary Switch to start rinsing the milk system.

Change filter The filter cartridge no longer works.

T Replace the CLARIS Blue filter cartridge (see Chapter 5 Maintenance Changing the filter).

Clean machine The IMPRESSA is prompting you to clean it.

T Perform cleaning (see Chapter 5 Maintenance Cleaning the machine).

Decalcify machine

The IMPRESSA is prompting you to descale it.

T Perform descaling (see Chapter 5 Maintenance Descaling the machine).

Not enough ground coffee

There is insufficient ground coffee in the machine; the IMPRESSA stops the operation.

T The next time you prepare a bever- age, add more ground coffee (see Chapter 2 Preparation Ground coffee).

41

7 Troubleshooting

7 Troubleshooting

Problem Cause/Result Action

When preparing a latte macchiato, the typical three layers do not form.

T Turn the setting wheel of the cappuc- cino to the far right and the Milk Foam position . T Change the length of the interval to at least 30 seconds in programming mode (see Chapter 4 Permanent settings in programming mode Product settings).

Insufficient foam is produced when the milk is frothed or milk sprays from the cappuccino frother.

The cappuccino frother is dirty.

T Rinse and clean the cappuccino frother (see Chapter 5 Maintenance Rinsing the cappuccino frother). T Check that the air intake pipe is fitted on the cappuccino frother. T Rinse or replace the air intake pipe. You will find a replacement in the Welcome Pack.

Coffee only comes out in drips when it is being prepared.

Coffee or ground coffee has been ground too finely and is blocking the system. The same filter cartridge may have been used several times or the water hardness set incorrectly in the pro- gramming mode.

T Put the grinder on a coarser setting or use coarser ground coffee (see Chapter 1 Preparing and using for the first time Adjusting the grinder). T Perform descaling (see Chapter 5 Maintenance Descaling the machine ).

Water hardness cannot be adjusted.

The CLARIS Blue filter cartridge is activated.

T Deactivate the filter cartridge in programming mode.

Fill bean container is not displayed although the bean container is empty.

The bean monitor is dirty. T Clean the bean container (see Chapter 5 Maintenance Cleaning the bean container).

Empty drip tray is always displayed.

The metal contacts of the drip tray are dirty or wet.

T Clean and dry the metal contacts on the back of the drip tray.

42

7 Troubleshooting

Problem Cause/Result Action

Fill water tank is displayed although the water tank is full.

The water tank float is trapped.

T Descale the water tank (see Chapter 5 Maintenance Descaling the water tank).

Little or no water or steam comes out of the cappuccino frother. The pump is very quiet.

The connector of the cappuccino frother may be blocked by milk residues or limescale fragments loosened during descaling.

T Remove the cappuccino frother. T Unscrew the black connector with the aid of the hexagonal hole on the measuring spoon for ground coffee. T Clean the connector thoroughly. T Screw the connector back on by hand. T Carefully tighten it using the hexagonal hole on the measuring spoon, turning by no more than a quarter of a rotation.

Grinder is making a very loud noise.

There are foreign objects in the grinder.

T Contact customer support in your country (see Chapter 11 JURA contact details / Legal information).

ERROR 2 is displayed. If the machine was exposed to the cold for a long period of time, heating is disabled for safety reasons.

T Warm the machine at room temperature.

Other ERROR messages are displayed.

T Switch the IMPRESSA off at the power switch. Contact customer support in your country (see Chapter 11 JURA contact details / Legal information).

E If you were unable to solve the problem, contact customer support in your country (see Chapter 11 JURA contact details / Legal information).

43

8 Transport and environmentally friendly disposal

8 Transport and environmentally friendly disposal

In order to protect the IMPRESSA from frost during transport, the system must be emptied.

Precondition: Please select product: is displayed. T Carefully pull the cappuccino frother down and off. T Place a receptacle under the connector of the cappuccino

frother. T Press the 1 portion milk button.

Machine is heating. As soon as the machine has heated up, Please select pro- duct: appears.

T Press the 1 portion milk button again. 1 portion milk, hot steam is discharged from the connector.

T Remove and empty the water tank. g T Turn the Rotary Switch until 60 sec. is displayed.

Steam will continue to be discharged from the connector until the system is empty. Fill water tank

Q T Press the On/Off button. The IMPRESSA is switched off.

Please dispose of old machines in an environmentally neutral way.

H

Old machines contain valuable, recyclable materials which should be recycled. Please therefore dispose of old machines via suitable collection systems.

Transport / Emptying the system

Disposal

44

9 Technical data

9 Technical data

Voltage 220240 V ~, 50 Hz

Power 1450 W

Safety test S

Energy consumption Save energy / Active

Approx. 5 Wh

Energy consumption Save energy / Inactive

Approx. 12 Wh

Pump pressure Static, max. 15 bar

Holding capacity of water tank 2.1 l

Holding capacity of bean container 250 g

Holding capacity of coffee grounds container

Max. 16 portions

Cable length Approx. 1.1 m

Weight 10.9 kg

Dimensions (W H D) 28.5 34.2 43.3 cm

45

10 Index

10 Index

A Addresses 48 Automatic switch-off 28

B Bean container

Bean container with aroma preservation cover 4 Cleaning 39 Filling 10

Bus bar Technical data 44

Button On/Off button 5 P button (programming) 5

C Cappuccino 18 Cappuccino frother

Cleaning 33 Rinsing 33

CLARIS Blue filter cartridge Changing 34 Inserting and activating the filter 12

Cleaning Bean container 39 Cappuccino frother 33 Machine 36

Coffee 17 Coffee grounds container 4 Coffee spout

Height- and width-adjustable coffee spout 4

Consistency of grind Adjusting the grinder 15 Grinder adjustment switch 4

Contact details 48 Cover

Bean container 4 Cup platform 4 Customer support 48

D Degree of water hardness 13 Descaling

Machine 37 Water tank 39

Determining and adjusting the water hardness 13

Display 5 Display messages 40 Drip tray 4

E Emptying the system 43 Energy-saving mode 27 Errors

Troubleshooting 41 Espresso 17

F Factory settings

Restore factory settings 29 Filler funnel

Filler funnel for ground coffee 4 Filling

Bean container 10 Water tank 10

Filter Changing 34 Inserting and activating the filter 12

First-time use 11 Frother

Cappuccino frother 4

G Ground coffee 19

H Hotline 48 Hot water 21 Hot-water nozzle 4

46

10 Index

I Instant coffee

Ground coffee 19 Internet 10

J JURA

Contact details 48 Internet 10

L Language 30 Latte macchiato 18

M Machine

Cleaning 36 Descaling 37 Rinsing 32 Setting up 10 Switching off 23 Switching on 22

Mains cable 4 Maintenance

Daily maintenance 22 Maintenance 32 Messages, display 40 Milk foam 19 Milk system cleaning

Cappuccino frother cleaning 33 Milk system rinse

Rinsing the cappuccino frother 33 Milk, warm 19

P Permanently setting the water for the cup

size 20 Permanent settings in programming mode

24 Power switch 4 Preparation 16, 18

Cappuccino 18 Coffee 17 Espresso 17 Ground coffee 19 Latte macchiato 18 Milk 19

Problems Troubleshooting 41

Programming mode 24 Automatic switch-off 28 Energy-saving mode 27 Language 30 Maintenance settings 26 Product settings 25 Restore factory settings 29 Unit for amount of water 29

Proper use 6

R Rinsing

Cappuccino frother 33 Machine 32

Rotary Switch 5

47

10 Index

S Safety 6 Safety information 6 Settings

Permanent settings in programming mode 24

Setting up Setting up the machine 10

Short operating instructions 10 Switching off 23 Switching on 22 Switch-off

Automatic switch-off 28 Symbol description 3

T Technical data 44 Telephone 48 Troubleshooting 41

U Unit for amount of water 29 Use, First-time 11

V Viewing information 31

W Warm milk 19 Water tank 4

Descaling 39 Filling 10

Website 10

48

11 JURA contact details / Legal information

11 JURA contact details / Legal information

JURA Elektroapparate AG Kaffeeweltstrasse 10 CH-4626 Niederbuchsiten Tel. +41 (0)62 38 98 233

@ You will find additional contact details for your country at www.jura.com.

The machine complies with the following directives:

U 2006/95/EC Low Voltage Directive

U 2004/108/EC Electromagnetic Compatibility

U 2009/125/EC Ecodesign

U 2011/65/EU RoHS Directive

We reserve the right to make technical changes. The diagrams used in these instructions for use are for illustration purposes only and do not represent the original colours of the machine. Some details of your IMPRESSA may vary.

Your opinion is important to us!

Manualsnet FAQs

If you want to find out how the Impressa J80 One Touch TFT Jura works, you can view and download the Jura Impressa J80 One Touch TFT Coffee Machine Instruction Manual on the Manualsnet website.

Yes, we have the Instruction Manual for Jura Impressa J80 One Touch TFT as well as other Jura manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a Jura Impressa J80 One Touch TFT. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Jura Impressa J80 One Touch TFT Coffee Machine Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Jura Impressa J80 One Touch TFT Coffee Machine Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Jura Impressa J80 One Touch TFT Coffee Machine Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Jura Impressa J80 One Touch TFT Coffee Machine Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Jura Impressa J80 One Touch TFT Coffee Machine Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.