Jura Impressa F50 F5 F505 Coffee Machine Instruction Manual PDF

1 of 28
1 of 28

Summary of Content for Jura Impressa F50 F5 F505 Coffee Machine Instruction Manual PDF

IMPRESSA F50 / F5 / F505

Instructions for use

Legend: DISPLAY: serves as information.

DISPLAY: please follow the instructions shown.

= Note = Important = Tip

Fig. 1 Fig. 2 Fig. 3 Fig. 4

Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10

Fig. 11 Fig. 12 Fig. 13

Fig. 14 Fig. 15 Fig.17

Fig. 5

Fig. 16 Temp. max.

Temp. min.

Fig. 18

Fig. 19

Fig. 20

Control elements

1. Rotary Switch

2. Illuminated ring

3. ON/OFF key

4. Programming key

5. Draw-off key 1 cup

6. Draw-off key 2 cups

7. Maintenance key

8. Steam pre-selection key

9. Display dialog system

10. Water tank with carrying handle

11. Filler funnel for pre-ground coffee:

12. Bean tank cover

13. Aroma preservation cover

14. Steam/hot water draw-off valve

15. Professional Cappuccino Frother with milk pipe

16. Interchangeable hot water nozzle (see Fig. 5)

17. Height-adjustable coffee spout

18. Coffee grounds container

19. Drip grate

20. Drip tray

21. Power Switch

22. Metal shelf

10

9 13

14

17 18

11

3

1

2

12

20

4 7 85 6

15/16

19

Rotary Switch

13

21

22

5

Contents

1. Safety information ..........................................page 6 1.1 Warning ..............................................page 6 1.2 Precautions ..........................................page 6

2. Preparing the IMPRESSA................................page 6 2.1 Check supply voltage ..............................page 6 2.2 Check electrical fuse ..............................page 6 2.3 Fill water tank......................................page 7 2.4 Fill coffee beans....................................page 7 2.5 Adjusting the grinding gear .....................page 7 2.6 Power switch ........................................page 7

3. First use.......................................................page 7 4. Adjusting the water hardness ............................page 8 5. Installation of CLARIS plus filter cartridges ........page 9

5.1 Installing the filter ................................page 9 5.2 Replacing the filter ................................page 9

6. Rinsing the IMPRESSA...................................page 10 7. Adjusting the water quantity for coffee ................page 10 8. Drawing off 1 cup of coffee ..............................page 10 9. Drawing off 2 cups of coffee .............................page 11

10. Drawing off pre-ground coffee ...........................page 11 11. Drawing off hot water .....................................page 12 12. Drawing off steam ..........................................page 12 13. Dispensing Cappuccino with the

Professional Cappuccino Frother ........................page 13 13.1 Dispensing Hot Milk with the

Professional Cappuccino Frother ...............page 14 13.2 Cleaning the Professional Cappuccino

Frother ...............................................page 14 13.3 Rinsing the Professional Cappuccino

Frother ...............................................page 14 13.4 Cleaning the Professional Cappuccino

Frother ...............................................page 14 14. Switching off the IMPRESSA ...........................page 15

15. Programming ................................................page 15 15.1 Programming the filter ...........................page 16 15.2 Programming the water hardness ..............page 16 15.3 Programming the aroma ROBUST

or STANDARD .....................................page 16 15.4 Programming the temperature ..................page 16 15.5 Programming the time ............................page 17 15.6 Programming the automatic

switch-on time ......................................page 17 15.7 Programming the automatic

switch-off time......................................page 18 15.8 Cup counter .........................................page 18 15.9 Programming the language ......................page 18 15.10 Programming Display 24H/AM/PM ...........page 19 15.11 Programming the display for ML/OZ..........page 19

16. Maintenance .................................................page 19 16.1 Filling in water .....................................page 19 16.2 Emptying the coffee grounds container .......page 20 16.3 Drip tray missing...................................page 20 16.4 Fill coffee beans....................................page 20 16.5 Replacing the filter ................................page 20 16.6 Cleaning the IMPRESSA ........................page 20 16.7 IMPRESSA decalcify .............................page 21 16.8 General cleaning instructions ...................page 21 16.9 Emptying the system ..............................page 21

17. Cleaning .......................................................page 21 18. De-scaling.....................................................page 22 19. Disposal .......................................................page 23 20. Tips for perfect coffee .....................................page 24 21. Messages ......................................................page 25 22. Problems ......................................................page 26 23. Legal information ...........................................page 27 24. Technical Data...............................................page 27

E

6

Introduction

Thank you for purchasing the IMPRESSA. To ensure perfect func- tioning of your IMPRESSA, carefully read this operating manual and keep it for future reference. Should you need more information or if you encounter particular problems not specified in these operating instructions in sufficient detail, either contact us directly or contact your local authorized dealer.

You will also find useful tips on operation and maintenance of your IMPRESSA on the website at www.jura.com. Dont forget to check out the Knowledge Builder our ani- mated operating instructions. LEO, our assistant, will take you through all the functions.

1. Safety information

1.1 Warning

Children do not realize the dangers involved in using electric appliances, for this reason always keep an eye on children when they use electric appliances.

The coffee machine may only be used by instructed persons.

Never use a defective coffee machine or a machine with a defective mains cable.

Never repair or open the coffee machine yourself. Any repairs may only be carried out by authorized service shops using ori- ginal spare parts and accessories.

Never immerse the coffee machine in water.

1.2 Precautions

Never expose the coffee machine to weather (rain, snow, frost), never touch the machine when your hands are wet.

Place the IMPRESSA on a firm, level base that is resistant to any water that may leak. Never stand on hot or warm surfaces (oven hobs). Keep out of the reach of children.

If you dont use the machine for a longer time (holidays, etc.) always disconnect the mains cable.

Always disconnect mains cable before cleaning the machine.

When disconnecting the mains cable never pull on the mains cable or the machine itself.

The coffee machine is connected to mains supply via a mains cable. Make sure nobody can trip over the mains cable. Make sure children and pets cannot reach the machine

Never put the coffee machine or individual parts of it into a dishwasher.

Make sure to install the machine at a place with sufficient air circulation, to prevent overheating of the machine.

2. Preparing the IMPRESSA

2.1 Check supply voltage

The IMPRESSA is preset in the factory to the correct mains voltage. Check if your local mains supply voltage complies with the information given on the type plate on the underside of the IMPRESSA.

2.2 Check electrical fuse

The IMPRESSA is designed for an electric current of 10 amperes. Check if the electrical fuse has sufficient capacity.

7

2.3 Fill water tank

Only use fresh, cold water. Never fill in milk, mineral water or other liquids.

Remove the water tank and rinse it with cold tap water thoroughly (Fig. 4).

Then fill the water tank and reinstall it. Make sure to install the tank properly, it must engage audibly.

2.4 Fill coffee beans

To ensure that your machine will work perfectly for a long time and to avoid damage, please note that the grinding gear of your JURA coffee machine is not suitable for coffee beans which were treated, during or after roasting, with additives (e.g. sugar). Such coffee blends may damage the grinding gear. Any repair costs resulting from the use of such blends are not covered by warranty.

Open the bean tank cover (12) and remove the aroma preser- vation cover (13).

Remove any dirt or foreign matter from the bean tank.

Fill coffee beans in the bean tank and close the cover.

2.5 Adjusting the grinding gear

You can adjust the grinding gear to the roast of your coffee. We recommend

a fine grinding degree for bright roasts (the smaller the dots, the finer the grinding)

a coarse degree for dark roasts (the larger the dots, the coarser the grinding)

The grinding degree may only be adjusted while the grinding gear is running.

Open the bean tank cover (12) and remove the aroma preser- vation cover (13).

To adjust the grinding degree, turn the Rotary Switch (Fig. 2) to the required position.

2.6 Power switch

Actuate the power switch (21) on your IMPRESSA before using the machine for the first time.

We recommend that you switch off your IMPRESSA with the power switch (21) if you intend not to use the machine for longer periods of time (e.g.during holidays)

3. First use

Fill coffee beans in the bean tank (12).

Switch on the IMPRESSA using the ON/OFF key (3).

SPRACHE DEUTSCH

The illuminated ring (2) is active.

Turn the Rotary Switch (1) until the required language is dis- played.

For example LANGUAGE ENGLISH

Confirm your selection by pressing the Rotary Switch (1).

FILL WATER

Fill the water tank (10) with fresh water.

OPEN TAP

Place a receptacle under Professional Cappuccino Frother (15) (Fig. 10).

Open the steam / hot water draw-off tap (14) (Fig. 13).

E

8

FILLING SYSTEM

CLOSE TAP

Close the steam / hot water draw-off tap (14).

HEATING

PRESS RINSE

Press the maintenance key (7).

Machine carries out a rinsing operation.

RINSING

READY

If BEANS FILL is displayed, press the coffee draw-off key again. Machine not filled with coffee beans yet.

To get an excellent crema, adjust the coffee spout (17) to the size of your cup (Fig. 3).

4. Adjusting the water hardness

Water is heated in the IMPRESSA. As a result, calcification occurs during normal use and is indicated automatically. Before using the IMPRESSA for the first time the hardness of the water used must be adjusted. Use the supplied test sticks for this.

1 German hardness is equivalent to 1.79 French hardness.

If the filter is activated, the program step Water Hardness no longer appears.

The IMPRESSA has 5 hardness degrees which can be used and are displayed while you are adjusting the water hardness.

The displayed information means the following:

LEVEL Water hardness function switched off

LEVEL 1 German water hardness degree 1 to 7 French Water hardness degree 1.79 12.53

LEVEL 2 German water hardness degree 8 to 15 French Water hardness degree 14.32 26.85

LEVEL 3 German water hardness degree 16 to 23 French Water hardness degree 28.64 41.14

LEVEL 4 German water hardness degree 24 to 30 French Water hardness degree 42.96 53.7

When the IMPRESSA leaves the factory it is adjusted to LEVEL 3. You can adjust another hardness. To do this, proceed as follows:

READY

Press the programming key (4), illuminated ring (2) is active.

FILTER

Turn the Rotary Switch (1) until the following message is dis- played:

HARDNESS

Now press the Rotary Switch (1) to start the programming.

LEVEL 3

Turn the Rotary Switch (1) until the required level is displayed.

For example, LEVEL 4

Press the Rotary Switch (1) to confirm the required level.

HARDNESS

Press the programming key (4) to quit the programming mode.

READY

9

5. Installation of CLARIS plus filter cartridges

If the CLARIS plus filter cartridge is installed properly, de- scaling of the coffee machine is no longer required. For more information on the CLARIS plus filter cartridge refer to brochure CLARIS plus. Hard on limescale. Gentle on your coffee machine.

5.1 Installing the filter

Fold up the cartridge holder. Install the filter cartridge in the water tank, applying a gentle pressure (Fig. 1).

Fold down the cartridge holder again until it engages audibly.

Fill the water tank with cold, fresh tap water and install it again.

Press the programming key (4), the illuminated ring (2) is active.

FILTER

Press the Rotary Switch (1) to start the programming.

NO

Turn the Rotary Switch (1) until the following message is dis- played:

YES

Press the Rotary Switch (1) to activate the filter cartridge.

INSERT OPEN TAP

Put a sufficiently large container (at least 0.5 litre) under the Professional Cappuccino Frother (15) (Fig. 10).

If not installed already, insert the CLARIS plus filter.

Open the steam / hot water draw-off tap (14) (Fig.13).

RINSING FILTER

CLOSE TAP

Close the steam/hot water draw-off tap (14), now the IM- PRESSA will heat up to coffee temperature.

HEATING

READY

Now you have activated the filter. In Programming Mode the water hardness selection function is no longer displayed.

5.2 Replacing the filter

After drawing off approx. 50 litres, the filter cartridge will be used up. A message requesting you to replace the filter will appear on the display. Please monitor the period of use of the CLARIS plus filter cartridge (max. 2 months) using the scale on the cartridge holder by the water tank.

READY/FILTER

Switch off the IMPRESSA using the ON/OFF key (3).

Press the maintenance key (7) until the following message is displayed:

CHG FILTER OPEN TAP

Remove the water tank from the machine and empty it.

Fold up the cartridge holder. Install the filter cartridge in the water tank, applying a gentle pressure (Fig. 1).

Fold down the cartridge holder again until it engages audibly.

Fill the water tank with cold, fresh tap water and reinstall it.

Place a sufficiently large jug (approx 1 litre) under the Profes- sional Cappuccino Frother (15) (Fig. 10) and open the steam/hot water tap (14).

RINSING FILTER

CLOSE TAP

E

10

Open the steam / hot water draw-off tap (14).

HEATING

READY

6. Rinsing the IMPRESSA

When the IMPRESSA is switched off and has cooled down, a rinsing operation is started when the machine is switched on again. When the machine is switched off, a rinsing oper- ation is started automatically.

Switch on the IMPRESSA using the ON/OFF key (3).

HEATING

PRESS RINSE

Press the maintenance key (7).

RINSING

READY

7. Adjusting the water quantity for coffee

The indicated value in ML is a reference value and may deviate from the actual value

If you press the draw-off key for 2 cups (6) the water quantity is doubled automatically.

You can change/stop the water quantity during the draw-off operation, too. Turn the Rotary Switch (1) until the required ML value is displayed.

You can adjust the water quantity in steps of 5 ML using the Rotary Switch (1).

READY

Turn the Rotary Switch (1) until the required water quantity is displayed.

For example, 120 ML

8. Drawing off 1 cup of coffee

You have the possibility of increasing the strength of the coffee at any time in the grinding process by pressing the 1-cup draw-off key again For Example: by pressing the 1-cup draw-off key three times you get strong coffee.

STRONG

You can choose among three strengths at the push of a but- ton. The longer you press the draw-off key for 1 cup (5), the stronger your coffee will be (Display: MILD/ NORMAL/ STRONG).

You can adjust the water quantity before the draw-off opera- tion using the Rotary Switch (1).

You can stop the draw-off operation at any time by pressing any coffee draw-off key.

You can check the water quantity used for the last draw-off operation by pressing the Rotary Switch (1).

READY

Put a cup under the adjustable coffee spout (17).

Press the draw-off key for 1 cup (5) until the required strength is displayed:

MILD

180 ML (water quantity last adjusted)

The illuminated ring (2) is active.

Turn the Rotary Switch (1) again to select the water quantity individually:

11

10. Drawing off pre-ground coffee

Never use instant coffee or quick-coffee. We recommend that you always use powder from fresh coffee beans or, pre- ground, vacuum-packed coffee. Never fill in more than 2 portions of powder. The pre-ground coffee tank is no storage tank. Make sure that the pre-ground you use is not too fine. This may cause blocking of the system. In this case the coffee only drips out of the coffee spout.

If you have filled in too little powder, the message ADD MORE POWDER will be displayed. The IMPRESSA stops the operation and returns to "ready for draw off" mode.

You can stop the draw-off operation at any time by pressing any coffee draw-off key.

READY

Put 1 or 2 cups under the adjustable coffee spout (17).

Open the cover of the filler funnel for pre-ground coffee (11).

FILL POWDER

Fill 1 or 2 level spoonfuls of pre-ground coffee in the filler funnel for pre-ground coffee (11) (Fig. 11) and close the cover.

POWDER

SELECT CUP BUTTON

Press the required draw-off key for 1 cup (5) or 2 cups (6)

120 ML (water quantity last adjusted)

The illuminated ring (2) is active.

POWDER

Turn the Rotary Switch (1) again to select the water quantity individually:

For Example: 160 ML

For Example: MILD

Your product is being prepared.

READY

9. Drawing off 2 cups of coffee

Selecting the coffee strength is not possible when drawing off 2 cups of coffee. You will draw off 2 mild cups auto- matically.

You can adjust the water quantity before the draw-off ope- ration using the Rotary Switch (1). The adjusted value (ML) refers to 1 cup.

You can stop the draw-off operation at any time by pressing any coffee draw-off key.

You can check the water quantity used for the last draw-off operation by pressing the Rotary Switch (1).

READY

Put 2 cups under the adjustable coffee spout (17).

Press the draw-off key for 2 cups (6).

2 CUPS

120 ML (water quantity last adjusted)

The illuminated ring (2) is active.

Turn the Rotary Switch (1) again to select the water quantity individually:

For Example: 210 ML

2 CUPS

Your product is being prepared.

READY

E

12

For Example: 210 ML

POWDER

Your product is being prepared.

READY

11. Drawing off hot water

If you do not change the settings using the Rotary Switch (1), the water quantity last adjusted will be drawn off auto- matically.

Install the hot water nozzle (see Fig. 5 ) to obtain perfect water flow. Do not replace the replaceable hot water nozzle (16) directly after drawing off water, because the nozzle is hot after the draw-off operation.

At the start of the water draw-off operation there can be splashing Avoid direct contact with the skin!

READY

Place a cup under the replaceable hot water nozzle (16).

Open the steam / hot water draw-off tap (14) (Fig. 13).

The illuminated ring (2) is active.

For example, 140 ML

WATER

Adjust the required water quantity by turning the Rotary Switch (1).

For example, 200 ML

WATER

If the required water quantity is reached, the following message is displayed:

CLOSE TAP

Close the steam / hot water draw-off tap (14).

READY

Before CLOSE TAP water may still escape the system.

12. Drawing off steam

The Steam function is used for preparing milk foam and hot milk as well as for the Professional Cappuccino Frother (15) cleaning program.

With the optionally available 2-stage frothing nozzle, liquids can be heated and frothed using the steam function.

Make sure the nozzle is correctly fitted when drawing off steam. If the nozzle becomes blocked with particles of milk residue or is incorrectly assembled, the nozzle may disen- gage and come off while the frother is in use.

Due to the system design, some water will escape at first when steam is drawn. However, this will not affect the result in any way.

When drawing off steam, spluttering may occur at the start. The nozzle gets hot during operation. Avoid direct contact with skin.

READY

Press the steam pre-selection key (8).

HEATING

STEAM READY

To draw off steam, open the steam/hot water draw-off valve (14) (Fig. 13).

The illuminated ring (2) is active.

13

You can adjust the steam dispensing time individually by turning the Rotary Switch (1) until the required SEC are displayed on the screen.

For example, 35 SEC

If you do not change the steam dispensing time with the Rotary Switch (1), the machine will set the steam quantity according to the previously used settings.

While drawing off steam, STEAM is shown on the display.

Once the desired steam quantity has been reached, CLOSE TAP appears on the display.

Close the steam/hot water draw-off valve (14).

STEAM READY

The machine is ready to dispense steam as long as STEAM READY appears on the display.

Due to the system design, some steam may be released before the tap is closed.

Steam dispensing can be stopped at any time by closing the steam/hot water draw-off valve (13).

13. Dispensing Cappuccino with the Professional Cappuccino Frother

Cappuccino consists of one-third each of espresso, hot milk and milk foam. The Professional Cappuccino Frother (15) is used for preparing the milk portion. When steam is drawn, a vacuum is generated, which the Professional Cappuccino Frother (15) uses to draw milk and produce the milk foam. You can also heat up milk by turning the selector lever on the Professional Cappuccino Frother to the Milk position (Fig. 20).

To avoid malfunctions, the Professional Cappuccino Frother (15) must be cleaned regularly.

Make sure that the nozzle is correctly fitted. If the nozzle becomes blocked with particles of milk residue or is incor- rectly assembled, the nozzle may disengage and come off, when the frother is used.

Before using the Professional Cappuccino Frother for the first time, remove the protective cover from the nozzle (Fig. 6). The protective cover is used only during transport to protect the noz- zle against contaminant ingress.

Take the milk pipe out of the Welcome Pack and connect it to the Professional Cappuccino Frother.

Insert the other end of the milk pipe into a milk carton or con- nect it to a milk container (Fig. 7).

Place a cup under the Professional Cappuccino Frother (Fig. 7).

The high-quality stainless steel vacuum milk container is a practical addition for all lovers of milk specialities. It keeps the milk cool throughout the day and perfectly matches the design of your IMPRESSA. All original JURA accessories are available from stockists.

Turn the selector lever on the Professional Cappuccino Frother to the Milk Foam position (Fig. 18).

READY

Press the steam pre-selection key (8).

HEATING

STEAM READY

To draw off steam, open the steam/hot water draw-off valve (Fig. 13). The milk foam will be prepared.

E

14

The illuminated ring (2) is active.

You can adjust the steam dispensing time individually by turning the Rotary Switch (1) until the required SEC are displayed on the screen.

For example, 35 SEC

If you do not change the steam dispensing time with the Rotary Switch (1), the machine will set the steam quantity according to the previously used settings.

Adjust the steam dispensing time to suit the size of your cup.

While drawing off steam, STEAM is shown on the display.

Once the desired steam quantity has been reached, CLOSE TAP is shown on the display.

Close the steam/hot water draw-off valve (14).

STEAM READY

At any time, you can stop dispensing steam at an earlier stage by closing the tap for dispensing steam/hot water (14).

As long as STEAM READY is on view in the display, the machine is ready to dispense steam.

Due to the system design, steam can still escape and some milk may continue to drip before the tap is closed.

Now, move your cup with the milk foam under the coffee spout and draw off the desired coffee product (Fig. 8). Your Cappuccino is ready.

13.1 Dispensing Hot Milk with the Professional Cappuccino Frother

Turn the selector lever on the Professional Cappuccino Frother to the Milk position (Fig. 20). The procedure for dispensing hot milk is the same as the procedure for dispensing milk foam for Cappuccino (see sec- tion 13 Dispensing Cappuccino with the Professional Cap- puccino Frother).

13.2 Cleaning the Professional Cappuccino Frother

To ensure that the Professional Cappuccino Frother (15) works perfectly, you should rinse it with water whenever you have prepared some milk.

The IMPRESSA will not prompt you to rinse the Profession- al Cappuccino Frother.

13.3 Rinsing the Professional Cappuccino Frother

Carefully pull off the Professional Cappuccino Frother (15) from your IMPRESSA.

Disassemble the Professional Cappuccino Frother (15) into its components (Fig. 16).

Rinse all the nozzle parts thoroughly under running water.

Reassemble the Professional Cappuccino Frother (15) and reattach it to your IMPRESSA.

13.4 Cleaning the Professional Cappuccino Frother

To ensure that the Professional Cappuccino Frother (15) works perfectly, you should clean it daily if you have been preparing milk foam or hot milk.

15

The IMPRESSA will not prompt you to clean the Profes- sional Cappuccino Frother.

The JURA Auto-Cappuccino Cleaner is available from stockists.

Place a container under the Professional Cappuccino Frother (Fig. 9).

Fill a second container with 250 ml of fresh water and add one capful of Auto-Cappuccino Cleaner.

Immerse the milk pipe into the container with the Auto-Cappuc- cino Cleaner (Fig. 9).

READY

Press the steam pre-selection key (8).

HEATING

STEAM READY

To draw off steam open the steam/hot water draw-off valve (Fig 13).

Draw steam until the container with the Auto-Cappuccino Cleaner is empty.

This procedure cleans the Professional Cappuccino Frother and the milk pipe.

Close the steam/hot water draw-off valve.

STEAM READY

As long as STEAM READY os on view in the display, the machine is ready to dispense steam.

Fill the container with 2.5 dl of fresh water. Dip the milk pipe into the container with the fresh water.

When READY appears in the display, press the steam prese- lect key (8) again to set the machine in readiness for the steam function.

To draw off steam, open the steam/hot water draw-off valve (Fig. 13).

Draw off steam until the container with the fresh water is empty. During this procedure the Professional Cappuccino Frother (15) and the milk pipe are rinsed with fresh water.

Cleaning of the Professional Cappuccino Frother is now com- plete and your IMPRESSA is ready for use.

14. Switching off the IMPRESSA

To ensure perfect operation, please switch your IMPRESSA to standby mode with the (3) symbol first. Then switch the machine off with the power switch (21).

READY

Switch off the IMPRESSA using the ON/OFF key (3).

RINSING

An automatic rinsing operation is started.

15. Programming

When your IMPRESSA leaves the factory it is adjusted such that you can draw off coffee without having to change any settings. However, you can programme various parameters individually.

You can programme the following stages:

Filter Water hardness Aroma Temperature

E

16

Time Automatic switch-on time Automatic switch-off time Draw-offs Language Display

Programming key (4) Use the programming key (4) to open or quit the programming mode (no saving of values effected).

Rotary switch Turn the Rotary Switch to change the adjusted values or to select the next programming step. Press the Rotary Switch to check the values adjusted or to save the values selected

15.1 Programming the filter

Refer to Chapter 5.1 Inserting the filter.

15.2 Programming the water hardness

Refer to Chapter 4 Adjusting the water hardness.

15.3 Programming the aroma ROBUST or STANDARD

When the machine leaves the factory, the aroma is set to robust. If requested it can also be set to Standard.

READY

Press programming key (4) until FILTER appears.

The illuminated ring (2) is active.

Turn the Rotary Switch (1) until Aroma is displayed.

AROMA

Press the Rotary Switch (1).

ROBUST

Turn the Rotary Switch (1) until the following message is dis- played:

STANDARD

To confirm the new aroma settings, press the Rotary Switch (1).

AROMA

Press the programming key (4) to quit the programming mode or select the next programming item using the Rotary Switch (1).

READY

15.4 Programming the temperature

READY

Press programming key (4) until FILTER appears.

The illuminated ring (2) is active.

Turn the Rotary Switch (1) until Temperature is displayed.

TEMPERATURE

Press the Rotary Switch (1).

HIGH

Turn the Rotary Switch (1) to change the temperature from HIGH to NORMAL (or vice versa).

NORMAL

To confirm the new settings, press the Rotary Switch (1).

TEMPERATURE

17

Press the programming key (4) to quit the programming mode or select the next programming item using the Rotary Switch (1).

READY

15.5 Programming the time

You must programme the time if you want to use the auto- matic switch-on function.

READY

Press programming key (4) until FILTER appears.

The illuminated ring (2) is active.

Turn the Rotary Switch (1) until TIME is displayed.

TIME

Now press the Rotary Switch (1) to start programming the time.

--:--

Turn the Rotary Switch (1) to adjust the hours..

12:--

Press the Rotary Switch (1) to confirm the hour settings and to activate the minutes.

12:--

Turn the Rotary Switch (1) to select the minutes.

2:05

To confirm the new settings, press the Rotary Switch (1).

TIME

Press the programming key (4) to quit the programming mode or select the next programming item using the Rotary Switch (1).

READY

If the machine is disconnected from power supply, the time must be programmed again.

15.6 Programming the automatic switch-on time

You must programme the time (Chapter 15.5) if you want to use the automatic switch-on function.

READY

Press programming key (4) until FILTER appears.

The illuminated ring (2) is active.

Turn the Rotary Switch (1) until MACHINE ON is displayed.

MACHINE ON

Now press the Rotary Switch (1) to start programming the switch-on time.

--:--

Turn the Rotary Switch (1) to adjust the hours.

12:--

Press the Rotary Switch (1) to confirm the hour settings and to activate the minutes.

12:--

Turn the Rotary Switch (1) to select the minutes.

12:05

To confirm the new switch-on time, press the Rotary Switch (1).

MACHINE ON

Press the programming key (4) to quit the programming mode or select the next programming item using the Rotary Switch (1).

READY

E

18

15.7 Programming the automatic switch-off time

You can programme your coffee machine such that it will switch off automatically after a certain time. You can pro- gramme the switch-off time in a range between 0.5 and 9 hours, or select : (i.e. inactive).

READY

Press programming key (4) until FILTER appears.

The illuminated ring (2) is active.

Turn the Rotary Switch (1) until OFF AFT. HR is displayed.

OFF AFT. HR

Now press the Rotary Switch (1) to start programming the switch-off time. Switch-off time OFF AFT. HR

5.0 HR

Turn the Rotary Switch (1) to adjust the hours.

1.0 HR

To confirm the new switch-off time, press the Rotary Switch (1).

OFF AFT. HR

Press the programming key (4) to quit the programming mode or select the next programming item using the Rotary Switch (1).

READY

15.8 Cup counter

You can check how many cups of the following coffee products were drawn off: a) 1 cup b) 2 cups c) Powder coffee

READY

Press programming key (4) until FILTER appears.

The illuminated ring (2) is active.

Turn the Rotary Switch (1) until CUPS MADE is displayed.

CUPS MADE

Now press the Rotary Switch (1) to start programming the item CUPS MADE

The total number of drawn off products is displayed.

For example 100

Press one of the draw-off keys to learn the number of draw-off operations for the individual products (1 cup , 2 cups , powder)

For example, press draw-off key for 1 cup 20

The number of pre-ground coffee drawn off can be checked by opening the filler funnel for pre-ground coffee.

To quit, press the Rotary Switch (1).

CUPS MADE

Press the programming key (4) to quit the programming mode or select the next programming item using the Rotary Switch (1).

READY

15.9 Programming the language

READY

Press programming key (4) until FILTER appears.

The illuminated ring (2) is active.

Turn the Rotary Switch (1) until LANGUAGE is displayed.

19

LANGUAGE

Now press the Rotary Switch (1) to start programming the item LANGUAGE.

Turn the Rotary Switch (1) until the required language is dis- played.

For example ENGLISH

Press the Rotary Switch (1) to save the selected language

LANGUAGE

Press the programming key (4) to quit the programming mode or select the next programming item using the Rotary Switch (1).

READY

15.10 Programming Display 24H/AM/PM

READY

Press programming key (4) until FILTER / appears

The illuminated ring (2) is active.

Turn the Rotary Switch (1) until DISPLAY appears

Press the Rotary Switch (1)

ML/OZ appears

Turn the Rotary Switch (1) until 24H/AM PM appears

Press the Rotary Switch (1)

e.g. 24H

Select a setting of your choice.

Press the Rotary Switch (1) to save the setting.

DISPLAY

Press the programming key (4) to quit the programming mode or select the next programming item using the Rotary Switch (1).

READY

15.11 Programming the display for ML/OZ

READY

Press programming key (4) until FILTER / appears

The illuminated ring (2) is active.

Turn the Rotary Switch (1) until DISPLAY appears

Press the Rotary Switch (1)

ML/OZ appears

Press the Rotary Switch (1)

e.g. ML

Select a setting of your choice.

Press the Rotary Switch (1) to save the setting.

DISPLAY

Press the programming key (4) to quit the programming mode or select the next programming item using the Rotary Switch (1).

READY

16. Maintenance

16.1 Filling in water

FILL WATER

If this information is displayed, drawing off products is no longer possible. Refill water as described in Chapter 2.3.

E

20

READY

The water tank should be rinsed daily and refilled with fresh water. Only fill in fresh, cold water. Never fill in milk, mineral water or other liquids.

16.2 Emptying the coffee grounds container

EMPTY GROUNDS

If this message appears on the display, you can no longer draw off coffee. You must empty the coffee grounds con- tainer first (Fig. 14).

Carefully take out the drip tray, it is filled with water.

NO TRAY

Insert the empty and clean trip tray again.

READY

The red water level indicator appears when the drip tray is full.

16.3 Drip tray missing

NO TRAY

If this information is displayed, the drip tray (20) is not installed properly or was not installed at all.

Insert the drip tray (20).

READY

16.4 Fill coffee beans

FILL BEANS

Refill beans as described in Chapter 2.4.

The message REFILL BEANS will disappear after you draw off your next cup of coffee.

We recommend that you clean the bean tank regularly before refilling beans, using a dry cloth. Before cleaning the tank, switch off the IMPRESSA.

16.5 Replacing the filter

After drawing off 50 litres, the filter cartridge will be used up. A message requesting you to replace the filter will appear on the display.

Refer to Chapter 5.2 Replacing the filter.

16.6 Cleaning the IMPRESSA

After 200 draw-off operations or after 160 rinsing operations, the IMPRESSA must be cleaned. A message appears on the display, telling you to start the cleaning programme. You can still draw off coffee or hot water/steam. However, we recommend that you should clean the machine (Chapter 17) within the next few days.

READY CLEAN

21

16.7 IMPRESSA decalcify

During operation, the machine will calcify. The degree of scaling depends on the hardness of the water in your region. The machine will inform you when de-scaling is required. You can still draw off coffee or hot water/steam. However, we recommend that you should de-scale the machine (Chapter 18) within the next few days.

READY DECALCIFY

16.8 General cleaning instructions

Never use scratching objects, pan cleaners, cleaning sponges or caustic chemicals to clean the machine.

Wipe off the case on the inside and outside using a soft, moist cloth.

Clean the replaceable hot water nozzle after each use.

To ensure that the Professional Cappuccino Frother functions perfectly, you should rinse it with water each time after prepa- ring milk.

To ensure that the Professional Cappuccino Frother functions perfectly, you should clean it daily if you have prepared milk.

The water tank should be rinsed daily and refilled with fresh water.

If the water tank shows signs of scaling, remove the scaling using a commercial de-scaling solvent. Take out the water tank (Fig. 4).

Remove the CLARIS filter cartridge, if installed, before de- scaling the water tank.

16.9 Emptying the system

Precondition: IMPRESSA switched off

This operation is required to protect the IMPRESSA against frost damage during transports.

Place a container under the Professional Cappuccino Frother (15) (Fig. 10).

Press the steam preselection key (8) until the following message is displayed:

OPEN TAP

EMPTYING

CLOSE TAP

The IMPRESSA is switched off.

17. Cleaning

Your IMPRESSA features an integrated cleaning program. The cleaning operation will take some 15 min.

Original JURA cleaning tablets which are specially designed for the cleaning programm of your IMPRESSA are available at your authorized dealer. Please note that machine defects or residues in the water cannot be excluded if you use inappro- priate cleaning solvents.

Once started, the de-scaling operation must not be inter- rupted!

After each cleaning operation the filler funnel for pre-ground coffee should be cleaned (11).

READY CLEAN

E

22

18. De-scaling

Your IMPRESSA features an integrated de-scaling program. The de-scaling operation will take some 40 min.

Original JURA de-scaling tablets wich are specially designed for the de-scaling program of your IMPRESSA are available at your authorized dealer. Please note that machine defects or residues in the water cannot be excluded if you use inappro- priate de-scaling solvents.

If the IMPRESSA needs de-scaling, the corresponding mes- sage is displayed. You can still draw off coffee or hot water/steam and start the de-scaling program later. Before starting the de-scaling program, the machine must be switched off. Once started, the de-scaling operation must not be interrupted.

When using the de-scaling solvent, immediately remove any splashes or drips from sensitive surfaces, i.e. natural stone and wooden surfaces, or take appropriate precautions.

In any case wait until the de-scaling solvent is used up and the tank is empty. Never refill de-scaling solvent.

READY DECALCIFY

Switch off the IMPRESSA using the ON/OFF key (3).

Remove the Professional Cappuccino Frother (15) (Fig. 17).

Press the maintenance key (7) until the following message is displayed:

EMPTY TRAY

Empty the tray

Press the maintenance key (7) until the following message is displayed:

EMPTY TRAY

Empty the tray

NO TRAY

Insert the tray again.

Remove the drip grate (19).

Put a container (Fig. 12) under the adjustable coffee spout (17).

PRESS RINSE

Press the maintenance key (7).

CLEANING

FILL TABLET

Fill in the tablet (see Fig. 15)

PRESS RINSE

Press the maintenance key (7).

CLEANING

EMPTY TRAY

NO TRAY

READY

Wipe coffee powder tank with a dry cloth after the cleaning program has finished.

The cleaning operation was completed successfully.

23

NO TRAY

Insert the tray again.

SOLVENT IN TANK

Completely dissolve the content of one blister (3 tablets) in a jug containing 0.5 litres of water, and fill the mixture in the water tank. Reinstall the water tank.

OPEN TAP SOLVENT IN TANK

Put a sufficiently large container under the hot water spout (Fig. 17).

Open the steam / hot water draw-off valve (14) (Fig. 13).

DE-SCALING

CLOSE TAP

Close the steam / hot water draw-off tap (14).

DE-SCALING

EMPTY TRAY

Empty the tray

NO TRAY

Insert the tray again.

FILL WATER

Rinse the water tank thoroughly and fill it with cold, fresh tap water. Install it again.

OPEN TAP

Open the steam / hot water draw-off tap (14) (Fig. 13).

DE-SCALING

CLOSE TAP

After you have closed the steam / hot water draw off tap (14), the following message is displayed

DE-SCALING

EMPTY TRAY

Empty the tray

NO TRAY

Insert the tray again.

PRESS RINSE

Press the maintenance key (7).

RINSING

READY

The de-scaling operation was completed successfully.

19. Disposal

Please dispose of old machines in an environmentally compatible way Old machines contain valuable materials capable of being recycled which should be salvaged for recycling. Please therefore dispose of old machines via suitable collection systems.

E

24

20. Tips for perfect coffee

Height-adjustable coffee spout (17) You can adjust the height of the coffee spout to the size of your cups (Fig. 3)

Grinding degree Refer to Chapter 2.5 Adjusting the grinding gear.

Preheating cups You can preheat the cups using hot water or steam. The smaller the coffee you want to draw off, the more important preheating is.

Sugar and cream Stirring coffee/tea will result in heat being released. Adding refrigerated cream or milk will reduce the temperature of the coffee significantly.

25

21. Messages

Cause Remedy

FILL WATER Water tank is empty. Refill water

Float defective Rinse or de-scale water tank

FILL BEANS Bean tank is empty. Refill beans

Although you have refilled beans, the Draw off a cup of coffee. The message will message still appears. disappear only after you have drawn off a cup

of coffee

EMPTY GROUNDS Coffee grounds container full Empty coffee grounds container

Tray reinstalled too early after emptying Wait 10 sec. before reinstalling the tray

NO TRAY Drip tray not installed properly or missing Install tray properly

READY CLEAN Cleaning required Start cleaning programme (Chapter 17)

READY SCALED De-scaling required Start de-scaling programme (Chapter 18)

READY FILTER Filter used up Replace filter (Chapter 5.2)

FAULT General fault - switch off - disconnect from mains supply - Connect IMPRESSA to power supply - Switch on IMPRESSA

- Have IMPRESSA checked by - JURA Service

E

26

22. Problems

Problem Cause Remedy

Very loud noise coming from the Foreign body in grinding gear Drawing off pre-ground coffee still possible grinding gear Have IMPRESSA checked by JURA Service

Too little froth when Professional Cappuccino Frother Clean the Professional Cappuccino Frother frothing milk has become dirty (Chapter 13)

Individual parts of the Professional Check correct assembly of the Cappuccino Frother are incorrectly Professional Cappuccino Frother assembled

Coffee only drips Grinding degree too fine Coarser grinding gear adjustment from the coffee spout

Pre-ground coffee too fine Use a coarser pre-ground coffee

High-frequency, electromagnetic interference may influence the display. Drawing off coffee is possible at any time.

If the messages or problems still persist, please contact your local authorized dealer or JURA Elektroapparate AG.

27

23. Legal information

These operating instructions contain all the information required for using, operating and maintaining the machine properly. Knowledge of and compliance with the specifications contained in these operating instructions is required for using the machine safely as well as for operational safety and safety during maintenance. These operating instructions cannot cover any conceivable appli- cation. The machine was designed for private household use. Additionally we point out that the content of these operating instructions does not form part of any previous or existing agree- ment, consent or al legal relationship nor does it constitute a change of such an agreement, consent or legal relationship. Any obligations to be fulfilled by JURA Elektroapparate AG are stipu- lated in the corresponding purchase contract, which also contains the full and solely applicable warranty stipulations. These con- tractual warranty stipulations are neither extended nor limited by the specifications contained in these operating instructions. The operating instructions contain information, protected by Copy- right. Photocopying or translations into other languages shall not be permissible without JURA Elektroapparate AGs written approval.

24. Technical data

Voltage: 230V AC

Power: 1450 W

Intensity of current: 10 A

Safety check:

Energy consumption Standby: approx. 3.5 Wh

Energy consumption Ready for draw-off mode: approx. 11.5 Wh

Pump pressure: static, max. 15 bar

Water tank: 1.9 litres

Bean tank capacity: 200gr

Coffee grounds container capacity : max. 16 portions

Length of cable: approx. 1.1 m

Weight: 9.1 kg

Size (WxHxD): 28 x 34.5 x 44.5 cm

The machine complies with the following EU directives:

73/23/EWG dated 19/02/1973 "Low Voltage D

Manualsnet FAQs

If you want to find out how the Impressa F50 Jura works, you can view and download the Jura Impressa F50 F5 F505 Coffee Machine Instruction Manual on the Manualsnet website.

Yes, we have the Instruction Manual for Jura Impressa F50 as well as other Jura manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a Jura Impressa F50. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Jura Impressa F50 F5 F505 Coffee Machine Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Jura Impressa F50 F5 F505 Coffee Machine Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Jura Impressa F50 F5 F505 Coffee Machine Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Jura Impressa F50 F5 F505 Coffee Machine Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Jura Impressa F50 F5 F505 Coffee Machine Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.