Jura Impressa E50 E55 Coffee Machine Instruction Manual PDF

1 of 17
1 of 17

Summary of Content for Jura Impressa E50 E55 Coffee Machine Instruction Manual PDF

IMPRESSA E50 IMPRESSA E55

Instructions for use

03/01A rt

. N

r. 6

17 28

/0 01

80 15

Jura Elektroapparate AG, CH-4626 Niederbuchsiten, Internet http://www.juraworld.com Kundendienst Telefon 062 389 82 33

Fig. 1

Fig. 4

Fig. 7

Fig. 2

Fig. 5

Fig. 8

Fig. 3

Fig. 6

Fig. 9

1

2

Instructions for use Jura Impressa E50/E55 1. Water volume selector switch

2. Selector button for pre-ground coffee powder

3. Coffee button 2 cups

4. Rinsing button

5. Coffee button 1 cup

6. ON/OFF switch

7. Display with warning lamps

8. Water tank with carrying handle

9. Height-adjustable coffee-spout

10. Filler funnel for pre-ground coffee

11. Cover for bean container

12. Selector switch for coffee or hot-water/steam

13. Pivoting nozzle for hot-water/steam

14. Frothing nozzle

15. Container for coffee grounds

16. Drip tray cover

17. Drip tray

7

8

9 10

11

12

13

14

15

16

17

6

5

4

3

2

1

5

Contents Jura Impressa E50/E55

1. Description ..................................................page 6

1.1 Meaning of symbols in the display .............page 6

2. Safety instructions........................................page 6

2.1 Warnings ..............................................page 6

2.2 Safety precautions ..................................page 7

3. Check before use ..........................................page 7

3.1 Checking mains voltage ...........................page 7

3.2 Checking fuse ........................................page 7

3.3 Filling water tank ...................................page 7

3.4 Adding coffee beans ...............................page 7

3.5 Adjusting grinder ...................................page 7

3.6 Adjusting for water hardness....................page 8

3.7 Adjustable automatic close-down ..............page 9

4. Preparing machine........................................page 9

4.1 Filling the system with water ...................page 9

5. Rinsing the machine......................................page 9

6. Adjusting water volume .................................page 9

7. Drawing off espresso/normal coffee .................page 10

7.1 Drawing off espresso/strong coffee ............page 10

7.2 Drawing off espresso/extra-strong coffee ....page 10

7.3 Using pre-ground powder coffee ...............page 10

8. Using steam.................................................page 10

8.1 Resetting to stand-by status .....................page 11

9. Drawing off hot-water ...................................page 11

10. Switching off machine...................................page 11

11. Care and maintenance ...................................page 11

11.1 Fill water .............................................page 11

11.2 Empty ground container .........................page 11

11.3 Drip tray is missing................................page 11

11.4 Clean machine ......................................page 11

11.5 Machine furred .....................................page 12

11.6 Use of Claris filter cartridges ..................page 12

11.7 General cleaning instructions...................page 12

11.8 Regular servicing...................................page 12

11.9 Empty system .......................................page 12

12. Cleaning......................................................page 12

13. Decalcifying.................................................page 13

14. Disposal ......................................................page 14

15. Tips of a perfect coffee .................................page 14

16. Messages.....................................................page 15

17. Problems .....................................................page 17

18. Legal information .........................................page 17

19. Technical specifications .................................page 17

E

6

Important information for the user

Thank you for choosing this Jura product.

Please study these instructions carefully before using your new machine and keep them in a safe place for easy reference in the future. Should you require further information or should particular pro- blems occur that are not dealt with in these operating instructions in sufficient detail for you, then please ask you local dealer for the information you require or contact us directly.

1. Description

This fully-automatic espresso/coffee machine impresses because of its compactness and can prepare 1 or 2 cups of excellent, profes- sional-quality espresso/coffee with guaranteed froth at the same time. The unique Jura Pre Brew Aroma System/P.B.A.S ensures a full coffee aroma. The machine functions fully automatically at the press of a button. You have the choice of normal, strong or extra- strong coffee aroma, to suit your personal preference. The integra- ted grinder grinds beans to precisely the fineness you require. A separate filler funnel also enables you to use an additional sort of pre-ground coffee. The water volume is individually adjustable. Electronic monitoring of levels in the water tank and the grounds container simplify operations. The integrated rinsing, cleaning and decalcifying programs facilitate care and maintenance.

1. Meaning of symbols in the display

1. COFFEE READY 2. COFFEE STRONG/EXTRA STRONG 3. POWDER COFFEE 4. RINSE MACHINE 5. FILL WATER 6. EMPTY GROUNDS CONTAINER/DRIP TRAY MISSING 7. CLEAN MACHINE 8. MACHINE FURRED

2. Safety instructions

2.1 Warnings

Children are unaware of the dangers that electrical machines represent. Therefore children should never be left alone with electrical machines unsupervised.

This machine should only be used by people who have read and understood the operating instructions.

1 32 4

5 76 8

7

Never use a faulty machine or one with a damaged power cable.

Never immerse the machine in water.

2.2 Safety precautions

Never expose the machine to the effects of rain, snow or frost and never operate it with wet hands.

Place your espresso/coffee machine on a solid level surface. Never leave it on a surface that is warm or hot (hob etc.). Choose a location that is inaccessible for children or pets.

Remove plug from power socket if an absence for a longer period of time (holidays etc.) is planned.

Always remove plug from power socket before cleaning.

When removing plug from power socket, never tug on the cord or on the machine itself.

Never repair or open the machine yourself. All repairs should be performed only by authorised service centres using original Jura spare parts and accessories.

The machine is connected to the mains power socket via an electric cable. Ensure that no one trips over this cable and pulls down the machine. Keep children and animals away.

Never put the machine or even parts of it in the dishwasher.

To prevent overheating put the machine in an airy place.

If you are using an acid-based descaling agent, it is important to avoid any splashed or drips on sensitive kitchen surfaces, parti- cularly those in natural stone or wood. If they do occur, they should be removed immediately.

3. Check before use

3.1 Checking mains voltage

The machine is set for the correct voltage before leaving our fac- tory. Ensure that your mains voltage corresponds to the details quo- ted on the rating plate attached to the bottom of the machine.

3.2 Checking fuse

The machine is designed for a current of 10 amps. Check that an appropriate fuse is fitted.

3.3 Filling water tank

Remove water tank and rinse well with cold clean tap water.

Fill the tank and replace it in the machine. Ensure that the tank clicks correctly into place (Fig. 1).

Note: Use only clean cold water. Never fill the tank with milk, mineral water or any other liquid. You can also top the tank up with water without removing it from the machine. Simply pull up cover and pour water into the tank from above. Put cover back in its original position.

3.4 Adding coffee beans

Lift up cover of the bean container (11).

Clean out any dirt or alien elements from the bean container.

Fill the grinder container with coffee beans and close the cover.

3.5 Adjusting grinder

You can adjust the grinder to the roast of your coffee. We recom- mend the following:

for a light roasting a finer adjustment for a dark roasting a coarser adjustment

Open the cover of the bean container (11).

To adjust grinding turn selector switch (Fig. 2) to the wanted position.

E

8

You have the following possibilities to adjust the grade of grinding

the smaller the dots, the finer the grinding the bigger the dots, the coarser the grinding

Important: The grinding grade should only be adjusted while the grinder is working.

3.6 Adjusting for water hardness

The water is heated inside the machine. With use, this leads to calcium deposits (furring) forming on the machine. This is automa- tically indicated in the display. For this reason, it is necessary to adjust the machine to the hardness of your local water before you use it for the first time. Use the enclosed test-sticks for this purpose.

Note: 1 water hardness on the German scale represents 1.79 on the French scale.

The machine has got 5 hardness settings to choose from. The chosen grade is shown on the display.

Legend: = flashes

= lights up

Level 0 = Setting for Claris filter cartridges Display The display for automatic decalcifying is switched off.

Level 1 German water hardness 1 7 French water hardness 1.79 12.53

Level 2 German water hardness 8 15 French water hardness 14.32 26.85

Level 3 German water hardness 16 23 French water hardness 28.64 41.14

Level 4 German water hardness 24 30 French water hardness 42.96 53.7

The machine is adjusted to Level 3 before it leaves the factory. You can alter this setting by simply following the instructions below:

Pull the mains lead with its plug out from the cable box at the rear of the machine.

Put the mains plug into the wall socket.

Leave the machine switched off. Press the button for about 3 seconds. Now warning lamp

(Level 3) flashes.

Choose the required setting by pressing button and press button to store in memory. The warning lamps go out.

9

Note: It is only necessary to adjust the water hardness before the machine is used for the first time or when a diffe- rent quality of water is used. If no water hardness level is changed within 30 seconds, the display goes out and the last value programmed remains unchanged.

3.7 Adjustable automatic close-down

You can adjust the automatic close-down of 2 hours set by Jura to your own requirements. The machine provides 3 different levels:

1st Level Warning lamp flashes. The automatic close-down is not activated.

2nd Level Warning lamp flashes, warning lamps , light up. Automatic close-down is set to 2 hours.

3rd Level Warning lamp flashes, warning lamps , , , , light up. Automatic close-down is set to 5 hours.

To set or alter the automatic close-down follow the instructions below:

Put the mains plug into the wall socket.

Leave the machine switched off. Press button for about 3 seconds and choose the required

setting by pressing button .

Push button to store level in memory .

Note: If no change to the setting level is made within 30 seconds, the warning lamps go out and the last level stored remains effective.

4. Preparing machine

4.1 Filling the system with water

Press button to switch on the machine.

Warning , , , lamps flash.

Place an empty cup under the pivoting nozzle (13).

Turn selector switch for hot-water/steam (12) to position . Now the machine gives off water. Warning lamps , flash. The water flow is stopped automatically.

Turn back selector switch for hot-water/steam (12) to position .

5. Rinsing the machine

If warning lamp flashes, the machine needs rinsing.

Place an empty cup under the coffee-spout.

Press button. The rinsing is stopped automatically.

Note: If the machine has been switched off and has already cooled down it will be necessary to carry out this rinsing function when the machine is switched on again. After switching off the machine, the rinsing sets off automatically.

6. Adjusting water volume

Water volume is infinitely adjustable by means of the selector switch (1). The small cup means a small volume of water for espresso, the big cup means a larger volume of water for coffee. ll cup means a small volume of water for espresso, the big cup means a larger volume of water for coffee.

Tip: You can also change the water volume while coffee is being drawn off. Simply turn the selector switch (1) to give more or less water.

Note: If you press button the machine automatically doubles the amount of water and divides it between two cups.

E

10

7. Drawing off espresso/normal coffee

Switch on the machine by pressing button. The machine is ready as soon as the warning lamp lights up.

Place 1 or 2 cups under the coffee-spout and press the appro- priate button. The pre-brew function (P.B.A.S) moistens the coffee powder, briefly interrupts the flow and then the real brewing process begins.

Note: You can interrupt the flow of coffee at any time by simply pressing any one of the coffee buttons.

Tip: Adjust the coffee-spout height to the size of your cups to obtain a perfect head of froth (Fig. 3).

7.1 Drawing off espresso/strong coffee

Place 1 cup under coffee-spout (9) and press the required button until the warning lamp lights up. Warning lamp flashes.

Note: You can only draw off 1 cup of strong coffee at a time.

7.2 Drawing off espresso/extra-strong coffee

Place 1 cup under coffee-spout (9).

Press the required button until warning lamps, , flash.

Note: You can only draw off 1 cup of extra-strong coffee at a time.

7.3 Using pre-ground powder coffee

Press button.Warning lamps and light up.

Now put 1 or 2 level measuring spoons of pre-ground coffee (Fig. 4) into the powder funnel (10).

Place 1 or 2 cups under coffee-spout and press the coffee button required.

Important: Never use soluble instant coffee or quick coffee. Only use coffee powder from freshly ground beans or pre- ground vacuum-packed coffee. Never fill the funnel with more than 1 or 2 portions at a time. The powder funnel is not intended as a storage container. Note: If button is pressed by mistake, this can be cor- rected by pressing button . The machine rinses.

Tip: We recommend a regular cleaning of the funnel with a bottle-brush after drawing off powder coffee.

8. Using steam

Steam can be used for heating up liquids as well as for frothing up milk for cappuccinos. To heat up liquids remember to push the frothing nozzle (14) up. For frothing up liquids push the nozzle down (Fig. 5).

Put a cup under the pivoting nozzle (13).

Immerse the frothing nozzle (14) into the milk you want to froth or into the liquid you want to heat up. Turn selector switch for coffee or hot-water/steam (12) to position (Fig. 5).

To stop steam-function turn selector switch for coffee or hot- water/steam (12) back to position .

Warning lamps , , , flash.

If you would like to draw off coffee right after drawing off steam, proceed as described in chapter 8.1.

Note: The max. drawing off time for steam is about 8 minu- tes. Due to the start frothing. This water should be drawn off before drawing off steam. However the perfect result (e.g. of frothing milk) is not influenced.

11

Important: When steam is first drawn off, there is a possibi- lity of spattering. The pivoting nozzle becomes hot. Avoid direct contact with the skin.

8.1 Resetting to stand-by status

Place a container under the pivoting nozzle (13).

Turn selector switch for hot-water/steam (12) to position .

Push button and draw off water until water-flow is automa- tically stopped. Warning lamps , , , flash.

Then turn back selector switch for hot-water/steam (12) to posi- tion .

Tip: Whenever you have finished drawing off steam clean the pivoting nozzle with a damp cloth.

9. Drawing off hot-water

Place a cup under the pivoting nozzle (13) and turn selector switch for hot-water/steam (12) to the symbol .

Press button . The machine will now deliver hot-water.

To stop this process turn back selector switch for hot-water/ steam (12) to the sympol .

Important: When hot-water and steam are first drawn off, there is a possibility of spattering. The pivoting nozzle beco- mes hot. Avoid direct contact with the skin.

10. Switching off machine

When the machine is switched off, the rinsing program is auto- matically run again. Place an empty cup under the coffee-spout and press button. When the rinsing water has run into the cup, the machine powers down. Discard the water.

11. Care and maintenance

11.1 Fill water

When warning lamp lights up no more coffee can be drawn off. Top up water as described in chapter 3.3.

11.2 Empty grounds container

Coffee grounds are collected in the grounds container. When warning lamp lights up, all coffee buttons are blocked and you must empty the grounds container.

Push up coffee-spout (9).

Remove drip tray. Do this carefully as there is water in it.

Remove and clean drip tray (Fig. 6) and grounds container. First replace grounds container and then drip tray (Fig. 7).

Important: Whenever grounds container is emptied, empty drip tray too.

11.3 Drip tray is missing

If the drip tray is not replaced correctly, warning lamp flashes.

Note: When the drip tray is outside the machine you can take the opportunity to clean the inside of the machine. Wipe off any of coffee powder with a damp cloth. Then replace clean drip tray.

11.4 Clean machine

After coffee etc. has been drawn off 200 times or 160 rinse programs have been run, the machine must be cleaned. Warning lamp will remind you. You can still draw off coffee and hot- water/steam. However we recommend that you clean the machine (as described in chapter 12) within the next few days. Warning lamp does not go out until the complete cleaning process has been carried out.

E

12

11.8 Regular servicing

Regular Jura services ensure your machines reliability and longer life. Keep the original packaging to protect the machine when it is transported.

11.9 Empty system

Important: This process is necessary to protect the machine from frost damages while being transported.

Press button to switch off the machine.

Place a container under the pivoting nozzle (13)

Turn selector switch for hot-water/steam (12) to position .

Press button to switch on the machine. Warning lamps , , , flash.

Press button until only warning lamp flashes. Steam comes out after a short time.

Draw off steam until it stops automatically.

Turn selector button for hot-water/steam (12) back to position .

12. Cleaning

The machine has an integrated cleaning program.

Note: Whenever the machine needs cleaning, warning lamp lights up. You can still draw off coffee and hot-water/

steam and run the cleaning program later. Only use Jura cleaning tablets. These are available from your Jura dealer.

Important: It is essential not to interrupt the process once it has been started.

11.5 Machine furred

Your machine will become furred in the course of normal use. The amount of furring depends on the hardness of your water. The ma- chine registers when descalcifying becomes necessary and signals this via warning lamp . You can still draw off coffee and hot-wa- ter/ steam. However we recommend that you decalcify the machine (as described in chapter 13) within the next few days. Warning lamp does not go out until the complete decalcifying process has been carried out.

11.6 Use of Claris filter cartridges

At the correct use of Claris filter cartridges, decalcifying of the machine becomes unnecessary. For further information, please read the instructions for use attached to the water tank.

Note: Furring display must be switched off (as described in chapter 3.6) before using Claris filter cartridges.

11.7 General cleaning instructions

Never use sharp or abrasive articles or corrosive chemicals to clean your machine.

Wipe down the casing inside and out using a soft damp cloth.

Clean the pivoting hot-water/steam nozzle every time it is used.

After warming milk, draw off a little hot-water to clean the pivoting nozzle inside.

You can take off the pivoting nozzle for a thorough cleaning (Fig. 8).

The water tank should be rinsed out and filled with clean water daily.

Note: If you notice any furring in the water tank, this can be descalcified separately with a customary decalcifying pro- duct. Remove the tank from the machine in order to do this.

13

Switch on machine by pressing button.

Push button for about 3 seconds. Warning lamps , (if necessary) , light up.

Fill water tank.

Empty drip tray and grounds container and replace them. War- ning lamps (if necessary) go out.

Place a container under the coffee-spout (9).

Put a Jura cleaning tablet (Fig. 9) into the powder funnel (10).

Press selector button . The warning lamp goes out. Warning lamp flashes.

The flashing of warning lamp indicates that the cleaning process is activated.

If warning lamp lights up, empty drip tray (if necessary), wait about 10 seconds before replacing it. Warning lamp goes out.

Replace the container under the coffee-spout (9) and press button .

The cleaning process is continued.

If warning lamp lights up again, empty drip tray (if neces- sary), wait about 10 seconds before replacing it. Warning lamp

goes out.

Replace the container under the coffee-spout (9) and press button .

The cleaning process is continued. At the end of it, warning lamp lights up.

Empty drip tray and grounds container and replace them. Warning lamp lights up.

Replace container under the coffee spout (9) and press button . The machine rinses and warning lamp lights up.

Tip: Clean powder funnel with a bottle-brush.

13. Decalcifying

Your machine has an integrated decalcifying program. If a Claris fil- ter cartridge is used there is no need for decalcifying your machine. Please use Jura decalcifying tablets only. These are available from your Jura dealer

Note: If the machine needs decalcifying warning lamp lights up. You can still draw off coffee and hot-water/steam and run the decalcifying program later. Important: Run the decalcifying program only after the ma- chine has been switched off for at least 2 hours and has cooled down completely. The decalcifying program is started with the machine switched off. The running decalcifying program must not be interrupted.

Switch off machine by pressing button and let the machine cool down for 2 hours.

Then remove water tank.

Press button for about 3 seconds. Warning lamps , , light up.

Pour 0,5 litres of water into a container and completely dissolve the contents of a blister pack (2 tablets). Then fill the mixture in- to the water tank.

Empty drip tray and replace it. Warning lamps , , , flash and warning lamp lights up.

Place a sufficiently big container under the pivoting nozzle (13). Turn selector switch for hot-water/steam (12) to position .

E

14

The flashing of warning lamp indicates that the decalcifying program is activated.

If warning lamp lights up, empty drip tray (if necessary). Warning lamps , , , flash and warning lamp lights up.

Turn selector switch for hot-water/steam (12) back to position .

The decalcifying program is continued and the decalcifying soluti- on is channelled inside the machine to the drip tray.

Warning lamp flashes and warning lamps , , , light up.

Important: Fill water tank with fresh water and replace it.

Empty drip tray (if necessary) and replace it. Warning lamps , , , flash and warning lamp lights up.

Put a sufficiently big container under the pivoting nozzle (13). Turn selector switch for hot-water/steam (12) to position . Warning lamps , flash.

The decalcifying program is continued.

Warning lamp flashes and warning lamps , light up.

Empty drip tray (if necessary) and replace it. Warning lamps , , , flash and warning lamp lights up.

Turn selector switch for hot-water/steam (12) back to position . Warning lamps , flash.

The decalcifying program is continued and the decalcifying soluti- on is channelled inside the machine to the drip tray.

Warning lamp flashes, warning lamps , light up.

Empty drip tray and replace it.

Then press button . Your machine rinses and is ready to draw off coffee.

14. Disposal

For correct disposal, you should return your coffee machine to your dealer, Jura service centre or Jura Elektroapparate AG.

15. Tips for a perfect coffee

Height adjustable coffee-spout You can adjust the height of the coffee-spout to your cup sizes.

Grinding Please see chapter 3.5.

Pre-warm cups You should warm cups in advance with hot water or steam. The smaller the quantity of coffee, the more important warming the cups is.

Sugar an cream Warmth is lost by stirring the contents of the cup. Adding milk or cream from the refrigerator considerably lowers the temperature of the coffee.

15

16. Messages

Display Cause Action

System empty Fill the system (see chapter 4.1)

System too hot after drawing off steam Re-set to coffee ready

Selector switch in wrong position Re-set to correct position

General troubles 1. Switch off Disconnect from mains power Connect machine to mains power Switch on machine

2. Have the machine checked at a Jura service centre

Machine needs rinsing Rinsing the machine

Water tank empty Fill water tank

Float faulty Rinse out tank, descalcify tank if necessary

Grounds container full Empty grounds

Drawer replaced too early Wait at least 10 seconds and replace drawer

Drip tray not inserted properly or missing Replace correctly

E

16

Display Cause Action

Cleaning necessary Run cleaning program

Decalcifying necessary Run decalcifying program

17. Problems

Problem Cause Action

Coffee flow is stopped after Beans container is empty Fill in beans pre-brewing Not enough coffee powder Measure powder correctly

Grinder is extremely noisy Alien element in grinder Drawing off powder coffee is still possible Have the machine checked at a Jura service centre

Not enough froth Unsuitable milk-type Use full cream milk Frothing nozzle blocked Clean frothing nozzle Frothing nozzle in wrong Drawing off steam (see chapter 8)

If none of the remedies listed above help, please contact your dealer or get in touch with Jura Elektroapparate AG.

17

18. Legal information

These operating instructions contain all the information necessary for the correct use, operation and maintenance of your espresso/ coffee machine.

Understanding and complying with the directions contained in these operating instructions are essential to ensure that the machi- ne is utilised without risk and to ensure safety during operation and maintenance. These operating instructions cannot cover all the possible ways in which this machine may be used. This machine has been designed for private use in households.

We would further point out that the contents of these operating in- structions in no way constitute a part of, or alter, any previous or existing contract, agreement or legal relationship. All obligations on the part of Jura Elektroapparate AG result solely from the rele- vant sales agreement which also contains full details of the only warranty terms valid in respect of this machine. The contractual terms of this warranty are neither extended not limited in any form by the information in these operating instructions. These operating instructions contain information that is protected by copyright. The photocopying or translation into any other lan- guage of these instructions without prior written authorisation from Jura Elektroapparate AG is strictly prohibited.

19. Technical specifications

Volta

Manualsnet FAQs

If you want to find out how the Impressa E50 Jura works, you can view and download the Jura Impressa E50 E55 Coffee Machine Instruction Manual on the Manualsnet website.

Yes, we have the Instruction Manual for Jura Impressa E50 as well as other Jura manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a Jura Impressa E50. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Jura Impressa E50 E55 Coffee Machine Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Jura Impressa E50 E55 Coffee Machine Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Jura Impressa E50 E55 Coffee Machine Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Jura Impressa E50 E55 Coffee Machine Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Jura Impressa E50 E55 Coffee Machine Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.