Jura Giga X3 Professional Coffee Machine Instruction Manual PDF

1 of 60
1 of 60

Summary of Content for Jura Giga X3 Professional Coffee Machine Instruction Manual PDF

GIGA X3 Professional Instructions for Use

JURA Type 726

K Original instructions for use

Before using the machine read the instructions for use. E

2

Table of contents

Your GIGA X3 Professional

Control elements 4 Important information 6

Proper use ......................................................................................................................................................6 For your safety ...............................................................................................................................................6

1 Preparing and using for the first time 10 JURA on the Internet ....................................................................................................................................10 Settings by the JURA service technician ...................................................................................................10 Setting up the machine ..............................................................................................................................10 Filling the water tank ...................................................................................................................................10 Filling the bean container ............................................................................................................................11 First-time use .................................................................................................................................................11 Determining the water hardness ..............................................................................................................15 Connecting milk ...........................................................................................................................................15

2 Preparation 16 Coffee, latte macchiato etc.  options for preparation .........................................................................16 Preparation at the touch of a button ........................................................................................................ 17 Preparation using the product selector ...................................................................................................18 Ground coffee ...............................................................................................................................................18 Barista recipes at a glance ..........................................................................................................................19 Preparing barista recipes ...........................................................................................................................20 Permanently setting amounts for the cup size .....................................................................................20 Hot water .......................................................................................................................................................21

3 Daily operation 22 Switching on ................................................................................................................................................ 22 Daily maintenance ...................................................................................................................................... 22 Regular maintenance ................................................................................................................................. 23 Switching off ................................................................................................................................................ 23

4 Permanent settings in programming mode 24 Possible settings in programming mode ...............................................................................................24 Product settings ..........................................................................................................................................25 Adjusting the product settings .................................................................................................................25 Renaming a product ................................................................................................................................... 27 Adding products to the start screen ........................................................................................................28 Setting the consistency of grind ..............................................................................................................29 Maintenance settings .................................................................................................................................30 Setting the water hardness ........................................................................................................................31 Energy-saving mode ...................................................................................................................................31 Time and date .............................................................................................................................................. 32 Timer ............................................................................................................................................................. 33 Automatic switch-off ..................................................................................................................................34 Units ..............................................................................................................................................................35 Restore factory settings .............................................................................................................................35 Language ......................................................................................................................................................36

3

Table of contents

Warnings

J WARNING J CAUTION

Always take note of any information marked with the words CAUTION or WARNING and a warning sign. The signal word WARNING draws your attention to potential serious injury, and the signal word CAUTION to potential minor injury.

CAUTION CAUTION draws your attention to potential damage to the machine.

Symbols used

T Prompt to take action. This symbol means that you are being prompted to perform some action.

E Information and tips to make it even easier to use your GIGA.

Espresso Display

Symbol description

Display settings ...........................................................................................................................................36 Background .................................................................................................................................................. 37 Deactivating barista recipes ......................................................................................................................38 Querying information ................................................................................................................................38

5 Maintenance 40 Rinsing the coffee system .........................................................................................................................40 Rinsing the milk system ..............................................................................................................................41 Cleaning the milk system ...........................................................................................................................41 Dismantling and rinsing the dual spout .................................................................................................42 Inserting and activating the filter .............................................................................................................45 Changing the filter ......................................................................................................................................46 Cleaning the machine ................................................................................................................................47 Descaling the machine ..............................................................................................................................48 Cleaning the bean container .....................................................................................................................50 Descaling the water tank ............................................................................................................................51

6 Display messages 52 7 Troubleshooting 54 8 Transport and environmentally friendly disposal 55

Transport / Emptying the system .............................................................................................................55 Disposal .........................................................................................................................................................55

9 Technical data 56 10 Index 57 11 JURA contact details / Legal information 60

4

Control elements

Control elements

4

5

2

7

6

9

14

13

12

8

10

11

3

1

1 Bean container with aroma preservation cover

2 Water tank cover 3 Water tank 4 Power switch and plug-in mains cable  

(back of the machine) 5 Coffee grounds container 6 Drip tray 7 Cup grille

8 Filler funnel for ground coffee 9 Ventilation slats 10 Storage compartment cover 11 Measuring spoon for ground coffee 12 Height- and width-adjustable dual spout 13 Splash guard 14 Height-adjustable hot-water spout

5

Control elements

1

4

5

32

Top of the machine 1 Q On/Off button 2 g Rotary Switch 3 O P button (programming)

Front 4 Display 5 Multi-function buttons (button function

depends on what is shown in the display)

1

2

3 4

Back of the machine 1 Service cover  

(open by pressing with your finger) 2 Locking device

3 Sliding catch 4 Service socket (underneath cover)

6

Important information

Important information

This machine is intended for use by specialist or trained staff in businesses, light industry and agri- cultural facilities or for commercial use by non-pro- fessionals. It should only be used for coffee prepa- ration and to heat milk and water. Use for any other purpose will be deemed improper. JURA Elektroap- parate AG cannot accept any responsibility for the consequences of improper use.

Before using the machine read these instructions for use thoroughly and completely and comply with the instructions they contain. A warranty ser- vice is not applicable for damage or defects caused by non-compliance with the instructions for use. Keep these instructions for use close to the machine and pass them on to the next user.

The GIGA may only be operated by instructed per- sons. Non-professionals must be supervised dur- ing use.

Please carefully read and observe the important safety information set out below.

To avoid danger of potentially fatal electric shock: U Never use a machine which is damaged or has

a defective mains cable. U In the event of signs of damage, for example if

there is a smell of burning, unplug the machine immediately from the mains supply and con- tact JURA service.

U If the mains cable of this machine is damaged, it must be repaired either directly by JURA or by an authorised JURA service centre.

Proper use

For your safety

J

7

Important information

U Make sure that the GIGA and the mains cable are not located close to hot surfaces.

U Be careful to ensure that the mains cable is not trapped and does not rub against sharp edges.

U Never open and repair the machine yourself. Do not modify the machine in any way that is not described in these instructions for use. The machine contains live parts. If opened, there is a danger of potentially fatal injury. Repairs may only be carried out by authorised JURA service centres, using original spare parts and accessories.

U To completely and safely disconnect the machine from the power supply, first switch off the GIGA using the On/Off button and then at the power switch. Only then should you remove the mains plug from the power socket.

There is a risk of scalds or burns on the spouts. U Place the machine out of the reach of children. U Do not touch any hot parts. Use the handles

provided.

A defective machine is not safe and could cause injury or fire. To avoid damage and any associated risk of injury or fire:

U Only connect the machine to the mains volt- age in accordance with the information on the rating plate. The rating plate is located on the underside of your GIGA. Further technical data is provided in these instructions for use (see Chapter 9 Technical data).

U Connect the GIGA directly to a domestic power socket. Using multi-socket adapters or exten- sion cords may cause overheating.

8

Important information

U Never allow the mains cable to loosely hang down. The mains cable could pose a tripping hazard or become damaged.

U Protect the GIGA from environmental influ- ences such as rain, frost and direct sunlight.

U Do not immerse the GIGA, mains cable or con- nections in water.

U Do not put the GIGA or any individual parts in the dishwasher.

U Switch your GIGA off at the power switch before any cleaning operation. Always wipe the GIGA with a damp cloth rather than a wet one, and protect it from prolonged exposure to water splash.

U The GIGA is not suitable for installation on a surface where a jet of water can be used.

U The machine must not be cleaned with a jet of water.

U Please only use original JURA maintenance products. Use of products that are not explic- itly recommended by JURA could damage the GIGA.

U Do not use any coffee beans treated with addi- tives or caramelised coffee beans.

U Only fill the water tank with fresh, cold water. U Switch the machine off at the power switch if

you are going to be absent for a longer period of time.

U Children may not clean or service the machine unless supervised by a responsible person.

U Do not allow children to play with the machine. U Keep children under the age of 8 away from

the machine, or supervise them constantly.

9

Important information

U Children aged 8 and over may only operate the machine without supervision if they have been instructed in how to use it safely. Chil- dren must be able to recognise and under- stand the potential dangers arising from incor- rect use.

People, including children, who U do not have the physical, sensory or mental

capabilities to use the machine safely or U are inexperienced or lack knowledge in how to

use the machine safely must be supervised by a responsible person when using it, or must be instructed in how to use it cor- rectly.

Safety when handling the CLARIS Pro Blue filter cartridge:

U Filter cartridges should be kept out of the reach of children.

U Store filter cartridges in a dry place in the sealed packaging.

U Protect cartridges from heat and direct sun- light.

U Do not use damaged filter cartridges. U Do not open filter cartridges.

10

1 Preparing and using for the first time

1 Preparing and using for the first time

Visit us on the Internet. On the JURA website (www.jura.com) you will find interesting and up-to-date information on your GIGA and on every aspect of coffee.

The following settings can only be made by the JURA service techni- cian:

U Disabling the product selector view (see Chapter 2 Prepara- tion Preparation using the product selector)

U Switching off pre-brewing for every speciality coffee

U Codes: Four codes can be assigned. For each code, you can define which programme items are available or disabled. Each code corresponds to different authorisations. For instance, you can define that initiation of the maintenance programmes is disabled using a code.

U Blocking the Permanently setting the amount of water for the cup size function

U Blocking the option of preparing a double product by pressing the appropriate single product twice

U Defining that a prompt to empty the drip tray does not appear after cleaning

You can also obtain the following optional accessories for your GIGA from your JURA service partner:

U Drip drain set

U Coffee grounds disposal function set

When setting up your GIGA, please note the following:

U Place the GIGA on a horizontal surface that is not sensitive to water.

U Choose a spot for your GIGA which protects the machine against overheating. Ensure that the ventilation slats are not covered.

Daily maintenance of the machine and hygiene when handling milk, coffee and water are key to a perfect coffee result in the cup every time. You should therefore change the water daily.

JURA on the Internet

Settings by the JURA service technician

Setting up the machine

Filling the water tank

11

1 Preparing and using for the first time

Milk, sparkling mineral water or other liquids can damage the water tank or the machine.

T  Only fill the water tank with fresh, cold water.

T  Open the water tank cover. T  Remove the water tank and rinse it with cold water. T  Fill the water tank with fresh, cold water and reinsert the

tank. T  Close the water tank cover.

The bean container has an aroma preservation cover. This will ensure that your coffee beans retain their aroma for longer.

Coffee beans which have been treated with additives (e.g. sugar), ground coffee or freeze-dried coffee will damage the grinder.

T  Only use roasted, untreated coffee beans to fill the bean con- tainer.

T  Remove the aroma preservation cover. T  Remove any dirt or foreign objects from inside the bean

container. T  Fill the bean container with coffee beans and close the

aroma preservation cover.

During first-time use, you can choose between the Quick installa- tion and the standard installation (Programming):

U Quick installation: After setting the time and date, your GIGA is ready for use.

U Standard installation (Programming): Here, you can also decide whether you want to operate your GIGA with or with- out the CLARIS Pro filter cartridge. If the water hardness is 10  dH or more, we recommend using the filter cartridge. If you do not know the hardness of your water, you can find this out first (see Chapter 1 Preparing and using for the first time Determining the water hardness).

CAUTION

Filling the bean container

CAUTION

First-time use

12

1 Preparing and using for the first time

U Use filter  / Active: Here, you can fit the CLARIS Pro Blue filter cartridge. Descaling will no longer be necessary.

U Use filter / Inactive: Here, you can set the water hardness of the water used. This setting influences when your GIGA prompts you to perform descaling.

If the machine is operated with a defective mains cable, there is a danger of potentially fatal electric shock.

T  Never use a machine which is damaged or has a defective mains cable.

Precondition: The water tank and bean containers have been filled. T  Connect the mains cable to the machine. T  Insert the mains plug into a power socket.

  3  T  Switch on the GIGA using the power switch on the back of the machine.

  Q  T  Press the On/Off button to switch the GIGA on. Welcome to JURA appears on the display. The display then shows the languages you can choose from.

E To display more languages, press the Next button (bottom right).

T  Press the button that corresponds to the language you want, e.g. English. Saved appears briefly on the display to confirm the setting. First-time use

E Now choose between Quick installation and standard instal- lation (Programming).

T  Press the Quick installation button. Time

T  Press the + or button to set the hours. T  Press the Save button. T  Press the + or button to set the minutes. T  Press the Save button.

Saved appears briefly on the display. Date

J WARNING

Quick installation

13

1 Preparing and using for the first time

T  Press the + or button to set the year. T  Press the Save button. T  Press the + or button to set the month. T  Press the Save button. T  Press the + or button to set the day. T  Press the Save button.

Saved appears briefly on the display. Machine is heating. Press the Rotary Switch., the Rotary Switch lights up.

  k  T  Press the Rotary Switch. System is filling., the system fills up with water. The opera- tion stops automatically. Machine is rinsing., the machine rinses. Water flows out of the dual spout. The operation stops automatically. Please select product: appears on the display. Your GIGA is ready for use.

T  Press the Programming button. Time

T  Press the + or button to set the hours. T  Press the Save button. T  Press the + or button to set the minutes. T  Press the Save button.

Saved appears briefly on the display. Date

T  Press the + or button to set the year. T  Press the Save button. T  Press the + or button to set the month. T  Press the Save button. T  Press the + or button to set the day. T  Press the Save button.

Saved appears briefly on the display. Use filter

E Now decide whether you want to operate your GIGA with or without a CLARIS Pro Blue filter cartridge.

Standard installation

14

1 Preparing and using for the first time

T  Press the Active button. T  Press the Save button.

Saved appears briefly on the display. Press the Rotary Switch., the Rotary Switch lights up.

  k  T  Press the Rotary Switch. System is filling., the system fills up with water. The opera- tion stops automatically. Insert filter. / Press the Rotary Switch.

T  Remove and empty the water tank. T  Open the filter holder and insert the filter cartridge into the

water tank, exerting slight pressure. T  Close the filter holder. It will click into place audibly. T  Fill the water tank with fresh, cold water and reinsert the

tank.   k  T  Press the Rotary Switch.

Filter is being rinsed., the filter is rinsed. Rinsing of the filter stops automatically. Empty drip tray. appears on the dis- play.

T  Empty the drip tray and coffee grounds container and put them back into the machine. Filter / Filter rinsing complete. Machine is rinsing., the machine rinses. Water flows out of the dual spout. The operation stops automatically. Please select product: appears on the display. Your GIGA is ready for use.

T  Press the Inactive button. T  Press the Save button.

Water hardness

E If you do not know the hardness of your water, you must find this out first (see Chapter 1 Preparing and using for the first time Determining the water hardness).

T  Press the + or button to adjust the water hardness. T  Press the Save button.

Saved appears briefly on the display. Press the Rotary Switch., the Rotary Switch lights up.

Activating the filter

Deactivating the filter

15

1 Preparing and using for the first time

  k  T  Press the Rotary Switch. System is filling., the system fills up with water. The opera- tion stops automatically. Machine is rinsing., the machine rinses. Water flows out of the dual spout. The operation stops automatically. Please select product: appears on the display. Your GIGA is ready for use.

You can find out what the water hardness is by using the Aquadur test strip supplied as standard.

T  Hold the test strip briefly (for 1 second) under flowing water. Shake off the water.

T  Wait for about 1 minute. T  You will then be able to read the degree of water hardness

from the discolouration of the Aquadur test strip and the description on the packaging.

Your GIGA creates fine, creamy, feather-light milk foam with a per- fect consistency. The most important requirement for frothing milk is a milk temperature of 48 C. We would therefore recommend using a milk cooler (e.g. the JURA Compressor Cooler Pro, which is available as an option).

T  Connect the milk pipe to the dual spout. To do this, attach the end of the milk pipe to the connector on the right-hand side of the dual spout.

T  Connect the other end of the milk pipe to a milk cooler.

Determining the water hardness

Connecting milk

16

2 Preparation

2 Preparation

E While a product is being prepared, you can stop preparation at any time. To do this, press the Rotary Switch k or the button.

E During preparation, you can change the preset amounts (e.g. amount of milk foam or water) by turning the Rotary Switch g.

E You can follow the current status of preparation on the display.

Coffee tastes best served hot. A cold porcelain cup cools the bever- age and impairs the taste. We therefore recommend prewarming the cups. The full coffee aroma can develop only in prewarmed cups. You can purchase a JURA cup warmer from your specialised dealer.

You can make permanent settings for all products in programming mode (see Chapter 4 Permanent settings in programming mode Adjusting the product settings).

The GIGA provides you with two options for preparing a speciality coffee, milk or hot water.

U Preparation at the touch of a button: Simply press the cor- responding preparation button for the product shown on the display (start screen) that you want.

U Preparation using the product selector (Rotary Selection): Only some of the products you can prepare are shown on the start screen. As soon as you turn the Rotary Switch, more products are displayed in a product selector.

U Turn the Rotary Switch to bring the product you want into focus. Start preparation by pressing the Rotary Switch or the Prepare button.

U The product selector view disappears automatically after 5 seconds if no preparation is started.

The two preparation options will now be described in more detail in the following sections.

Coffee, latte macchiato etc.  options for preparation

17

2 Preparation

On the display (start screen), you will see various products, which you can prepare by simply pressing the corresponding button.

A speciality coffee displayed on the start screen is always prepared following the same model.

Example: Proceed as follows to prepare one coffee. Precondition: Please select product: is displayed.

T  Place a cup under the dual spout. T  Press the Coffee button.

Preparation starts. Coffee and the fill volume are displayed. The preset amount of water for coffee flows into the cup. Preparation stops automatically. Please select product: appears on the display.

Two speciality coffees can always be prepared in the same way: Press the preparation button you want twice within two seconds.

Your GIGA prepares latte macchiato, cappuccino and other speciality coffees with milk at the touch of a button. There is no need to move the glass or cup.

Example: Proceed as follows to prepare one latte macchiato. Precondition: Please select product: is displayed, milk is connected to the dual spout.

T  Place a glass under the dual spout. T  Press the Latte macchiato button.

Latte macchiato, the preset amounts of milk and milk foam flow into the glass. Coffee preparation starts. The preset amount of water for espresso flows into the glass. Preparation stops automati- cally. Please select product: appears on the display.

To ensure that the milk system in the dual spout always works prop- erly, you must clean it daily (see Chapter 5 Maintenance Cleaning the milk system).

Preparation at the touch of a button

Speciality coffees at the touch of a button

Two speciality coffees at the touch of a button

Speciality coffees with milk at the touch of a button

18

2 Preparation

As soon as you turn the Rotary Switch, more products are displayed in a product selector.

E The product selector view disappears automatically after 5 seconds if no preparation is started.

Example: Proceed as follows to prepare a caff latte using the prod- uct selector. Precondition: Please select product: is displayed, milk is connected to the dual spout.

T  Place a cup under the dual spout.   g  T  Turn the Rotary Switch to view the product selector.   g  T  Turn the Rotary Switch until the Caff latte product is in

focus.   k  T  Press the Rotary Switch to start preparation.

The caff latte is prepared. Preparation stops automatically. Please select product: appears on the display.

You can choose to use another coffee variety, for example decaffein- ated coffee, with the filter funnel for ground coffee.

E Never add more than two level measuring spoons of ground coffee.

E Use ground coffee which is not ground too finely. Very fine coffee can block up the system so that the coffee only comes out in drips.

E If you did not fill the machine with a sufficient amount of ground coffee, Not enough ground coffee. is displayed and the GIGA stops the operation.

E The desired speciality coffee must be prepared within approx- imately one minute after filling with the ground coffee. Oth- erwise the GIGA stops the operation and is once more ready for use.

All speciality coffees with ground coffee are always prepared follow- ing the same model.

Preparation using the product selector

Preparation of a speciality coffee using the product

selector

Ground coffee

19

2 Preparation

Example: Proceed as follows to prepare one coffee using ground coffee. Precondition: Please select product: is displayed.

T  Place a cup under the dual spout. T  Open the cover of the filler funnel for ground coffee.

Please add ground coffee. T  Place one level measuring spoon of ground coffee into the

filler funnel. T  Close the cover of the filler funnel.

Please select product:, the speciality coffees you can pre- pare with ground coffee are displayed.

T  Press the Coffee button. Preparation starts. Coffee and the fill volume are displayed. The preset amount of water for coffee flows into the cup. Preparation stops automatically. Please select product: appears on the display.

Now you too can be a professional barista! You can select the recipes for 12 delicious coffee creations from the product selector using the Rotary Switch. The GIGA will guide you through each step of the preparation process with easy-to-follow text and pictures. Choose from:

U Marocchino

U Pepresso

U White Cool

U Flavoured latte macchiato

U Irish coffee*

U Caf mlange

U Viennese coffee

U Winter Magic

U Shakerato

U Mango Lassi

U Red Cool*

U Summer Fire Designed to please the eye as well as the taste buds! (Recipes marked * contain alcohol.)

Barista recipes at a glance

20

2 Preparation

All barista recipes are always prepared following the same model.

E The product selector view disappears automatically after 5 seconds if no preparation is started.

Example: Proceed as follows to prepare a White Cool. Precondition: Please select product: is displayed.   g  T  Turn the Rotary Switch to view the product selector.   g  T  Turn the Rotary Switch until the White Cool product is in

focus.   k  T  Press the Rotary Switch to start preparation.

T  Follow the instructions on the display and confirm by press- ing the Next button.

E You can stop preparation at any time by pressing the but- ton.

E You cannot make any permanent settings for barista recipes. During preparation, you can however change the coffee strength and quantities by turning the Rotary Switch f.

It is easy to make permanent settings for the amounts (amount of water, amount of milk etc.) according to the cup size for all products except caff latte. Adjust the amount once as shown in the following example. Every time you prepare a drink in the future, this amount will be dispensed.

The permanent settings for adapting the amounts to the cup size for all products always follows the same model.

Example:  Proceed as follows to permanently set the amount of water for one coffee. Precondition: Please select product: is displayed.

T  Place a cup under the dual spout. T  Press and hold the Coffee button.

Coffee and the fill volume are displayed. T  Hold the Coffee button down until Enough coffee? Press

button. appears. T  Release the Coffee button.

Preparation starts and the coffee flows into the cup.

Preparing barista recipes

Permanently setting amounts for the cup size

21

2 Preparation

T  Press any button as soon as there is sufficient coffee in the cup. Preparation stops. Saved appears briefly on the display. The set amount of water for one coffee is permanently stored. Please select product: appears on the display.

E You can alter this setting at any time by repeating the above procedure.

E The amount can be permanently adjusted to the cup size for the products shown in the product selector too. To do this, press and hold the Rotary Switch k until Enough coffee? Press button. appears.

E You can also permanently set the amount for all speciality coffees, milk and hot water in programming mode (see Chap- ter 4 Permanent settings in programming mode Adjusting the product settings).

The following temperatures can be selected for preparing hot water: Low, Normal, High.

There is a danger of scalding from hot water splashes. T  Avoid direct contact with the skin.

Precondition: Please select product: is displayed. T  Place a cup under the hot-water spout. T  Press the Hot water button.

Hot water and the temperature are displayed.

E By pressing the + or button (within approximately 2 sec- onds) you can set the temperature to your individual prefer- ence. This setting is not saved.

Hot water, hot water flows into the cup. Preparation stops automatically when the preset amount of water is reached. Please select product: appears on the display.

Hot water

J CAUTION

22

3 Daily operation

3 Daily operation

When the GIGA is switched on, a rinse operation is automatically ini- tiated. In programming mode you can change this setting so that the machine prompts you to perform the switch-on rinse by press- ing the Rotary Switch k (see Chapter 4 Permanent settings in pro- gramming mode Maintenance settings).

Precondition: Your GIGA is switched on at the power switch. T  Place a receptacle under the dual spout.

  Q  T  Press the On/Off button to switch the GIGA on. Welcome to JURA appears on the display. The machine heats up. Machine is rinsing., the machine rinses. Water flows out of the dual spout. The operation stops automatically. Please select product: appears on the display.

To ensure that you get many years of reliable service out of your GIGA and to guarantee the optimum coffee quality, the machine requires daily maintenance.

T  Pull out the drip tray. T  Empty the coffee grounds container and the drip tray. Rinse

them both with warm water.

E Always empty the coffee grounds container when the machine is switched on. This is the only way of resetting the coffee grounds counter.

T  Refit the coffee grounds container and the drip tray. T  Rinse the water tank with clean water. T  Remove the milk pipe and rinse it thoroughly under running

water. T  Dismantle and rinse the dual spout (see Chapter 5 Mainte-

nance Dismantling and rinsing the dual spout). T  Wipe the surface of the machine with a clean, soft, damp

cloth (e.g. microfibre cloth).

Switching on

Daily maintenance

23

3 Daily operation

Carry out the following maintenance actions regularly or as required:

U In the interests of hygiene, we recommend changing the milk pipe on a regular basis (approximately every 3 months). Replacement pipes are available from specialised dealers (JURA original accessory set for frothers).

U Clean the inside of the water tank, e.g. with a brush. Further information about the water tank is provided in these instruc- tions for use (see Chapter 5 Maintenance Descaling the water tank).

U Traces of milk and coffee may stick to the top and bottom of the cup grille. If this happens, clean the cup grille.

When you switch off your GIGA, the dual spout is rinsed automati- cally.

Precondition: Please select product: is displayed. T  Place a receptacle under the dual spout.

  Q  T  Press the On/Off button. Machine is rinsing., Milk system is being rinsed. (if you have prepared a speciality coffee with milk). The system rinses itself. The operation stops automatically. Your GIGA is switched off.

E When the GIGA is switched off with the On/Off button, the machine consumes less than 0.1  W of standby energy. The machine can be completely disconnected from the power supply using the power switch.

Regular maintenance

Switching off

24

4 Permanent settings in programming mode

4 Permanent settings in programming mode

Press the P button to enter programming mode. You can navigate through the programme items and permanently save the required settings simply by turning the Rotary Switch and using the multi- function buttons. The following settings can be made:

Programme item Sub-item Explanation Maintenance status (1/5)

Clean, Change the filter, Descale (only if filter is not activated), Rinse the milk system, Rinse the coffee system, Clean the milk system

T Start the required maintenance programme here.

Product settings (2/5)

Programming, Classic-library, Set consistency of grind

T Select your settings for speciality coffees, milk and hot water. T Replace the products on the start screen and in the product selector with your favourites, or prepare your chosen product directly. T Adjust the consistency of grind to the coffee beans used.

Machine settings (3/5)

Maintenance settings (filter, water hardness, switch-on rinse, milk system rinsing), Time / date, Timer, Save energy, Units, Factory setting

T Set the water hardness or activate the filter. T Change the settings for the switch-on rinse and milk system rinse. T Set the time after which the GIGA should switch off automatically. T Select an energy-saving mode. T Select the unit for the amount of water. T Reset the machine or the permanently set values of all products to the factory settings.

Machine settings (4/5)

Choose language, Display, Colour scheme, Barista recipes

T Select your language. T Change the display settings. T Activate or deactivate barista recipes.

Information (5/5) Product counter, Day counter, Maintenance counter, Version

T Keep track of all products prepared and view the number of maintenance programmes performed.

Possible settings in programming mode

25

4 Permanent settings in programming mode

In the programme item Product settings (2/5) you can make the following settings:

U Programming

U Set individual settings for all speciality coffees, milk and hot water (see Chapter 4 Permanent settings in programming mode Adjusting the product settings).

U Change the names of individual products (see Chapter 4 Permanent settings in programming mode Renaming a product).

U Classic-library

U Find all products stored as standard in your GIGA and pre- pare these directly.

U Replace the products on the start screen and in the product selector with your favourites (see Chapter 4 Permanent set- tings in programming mode Adding products to the start screen).

The following settings can be made in Product settings (2/5) / Programming:

Product Coffee strength Amount More settings Ristretto, Espresso, Coffee*

; (extra-mild), ;; (mild), ;;; (normal), ;;;; (strong), ;;;;; (extra-strong)

Amount of coffee: 25 ml  290 ml

Temperature (low, normal, high), Product name

2 ristretti, 2 espressi, 2 coffees

Amount of coffee: 25 ml  290 ml (per cup)

Temperature (low, normal, high), Product name

Cappuccino*, Espresso macchiato*, Latte macchiato, Flat white

; (extra-mild), ;; (mild), ;;; (normal), ;;;; (strong), ;;;;; (extra-strong)

Amount of coffee: 25 ml  290 ml Milk: 0 sec.  120 sec. Milk foam: 0 sec.  120 sec. Interval: 0 sec.  120 sec.

Temperature (low, normal, high), Product name

Product settings

Adjusting the product settings

26

4 Permanent settings in programming mode

Product Coffee strength Amount More settings 2 cappuccini, 2 caff latte, 2 espressi macchiati, 2 latte macchiati, 2 flat whites

Amount of coffee: 25 ml  290 ml Milk: 0 sec.  120 sec. Milk foam: 0 sec.  120 sec. (per cup) Interval: 0 sec.  120 sec.

Temperature (low, normal, high), Product name

Caff latte* ; (extra-mild), ;; (mild), ;;; (normal), ;;;; (strong), ;;;;; (extra-strong)

Amount of coffee: 25 ml  290 ml Milk: 0 sec.  120 sec. Milk foam: 0 sec.  120 sec.

Temperature (low, normal, high), Product name

Portion of milk foam, Portion of milk*

Milk: 0 sec.  120 sec. Milk foam: 0 sec.  120 sec.

Product name

2 portions of milk foam, 2 portions of milk

Milk: 0 sec.  120 sec. Milk foam: 0 sec.  120 sec. (per cup)

Product name

Pot, Pot 2

; (extra-mild), ;; (mild), ;;; (normal), ;;;; (strong), ;;;;; (extra-strong)

Amount of coffee: 25 ml  290 ml (per stroke)

Temperature (low, normal, high), Number of strokes (15; set number is displayed during preparation), Product name

Hot water* Water: 25 ml  450 ml Temperature (low, normal, high), Product name

(Products marked * are also available in large size.)

E In addition to the settings listed, you can reset the values for all products to the factory settings.

Example:  Proceed as follows in the Expert mode to change the amount of milk for a latte macchiato from 4 sec. to 6 sec., the amount of milk foam from 12 sec. to 14 sec. and the amount of water from 45 ml to 40 ml.

27

4 Permanent settings in programming mode

Precondition: Please select product: is displayed.   O  T  Press the P button.

Maintenance status (1/5)   g  T  Turn the Rotary Switch until the programme item Product

settings (2/5) is displayed. T  Press the Expert mode button.

Expert mode

E Next select the button of the product for which you would like to make settings. No product is prepared at this point.

E You can also select the products in the product selector. To do this, turn the Rotary Switch to view the product selector.

T  Press the Latte macchiato button. T  Press the Amount of milk button. T  Press the + or button to change the setting for the

amount of milk to 6 sec.. T  Press the Save button. T  Press the Amount of milk foam button. T  Press the + or button to change the setting for the

amount of milk foam to 14 sec.. T  Press the Save button. T  Press the Volume button. T  Press the + or button to change the setting for the fill

volume to 40 ml. T  Press the Save button.

  O  T  Press the P button to exit programming mode. Please select product:

In the programme item Product settings (2/5) / Programming you can rename all of the products.

Example:  Proceed as follows to change the product name from Espresso to My espresso. Precondition: Please select product: is displayed.   O  T  Press the P button.

Maintenance status (1/5)

Renaming a product

28

4 Permanent settings in programming mode

  g  T  Turn the Rotary Switch until the programme item Product settings (2/5) is displayed.

T  Press the Programming button. Programming

T  Press the Espresso button. T  Press the Product name button.

The available letters, numbers and special characters appear on the display.

T  Keep pressing the   <  button until all letters have been deleted.

E By pressing the     button, you can switch between lower and upper case letters.

  g  T  Turn the Rotary Switch until the letter M is highlighted.   k  T  Press the Rotary Switch to confirm the letter M.

T  Press the  ^  button to change to lower case.   g  T  Turn the Rotary Switch until the letter y is highlighted.   k  T  Press the Rotary Switch to confirm the letter y.

T  Continue until My espresso is displayed. T  Press the Save button.

Saved appears briefly on the display. My espresso

  O  T  Press the P button to exit programming mode. Please select product:

In the programme item Product settings (2/5) / Classic-library you will find all the products stored as standard in your GIGA. You can move any of these products to your preferred position on the start screen or in the product selector and make it one of your favourites.

Example: Proceed as follows to display the product 2 espressi in the bottom right-hand corner of the start screen. Precondition: Please select product: is displayed.   O  T  Press the P button.

Maintenance status (1/5)   g  T  Turn the Rotary Switch until the programme item Product

settings (2/5) is displayed.

Adding products to the start screen

29

4 Permanent settings in programming mode

T  Press the Classic-library button. Classic-library

E Next select the button of the product you want to move to the start screen. No product is prepared at this point.

T  Press the 2 espressi button. 2 espressi

T  Press the Save button. T  Press the Add to favourites button.

Select position T  Press the button at the bottom right (Milk).

Do you want to replace the current product? T  Press the Yes button.

Saved appears briefly on the display. Classic-library

  O  T  Press the P button to exit programming mode. Please select product:

In the programme item Product settings (2/5)  / Set consistency of grind you can adjust the grinder to the degree of roast of your coffee.

The consistency of grind is correct if the coffee flows regularly from the dual spout. In addition a fine, thick crema forms.

Precondition: Please select product: is displayed.   O  T  Press the P button.

Maintenance status (1/5)   g  T  Turn the Rotary Switch until the programme item Product

settings (2/5) is displayed. T  Press the Set consistency of grind button.

Set consistency of grind T  Press the + or button to change the setting for the con-

sistency of grind. T  Press the Save button.

Saved appears briefly on the display. Set consistency of grind

  O  T  Press the P button to exit programming mode. Please select product:

Setting the consistency of grind

30

4 Permanent settings in programming mode

In the programme item Machine settings (3/5) / Maintenance set- tings you can make the following settings:

U Filter

U Activate the CLARIS Pro Blue filter cartridge (see Chapter 5 Maintenance Inserting and activating the filter).

U Water hardness

U If you do not have a filter cartridge, you will need to set the water hardness (see Chapter 4 Permanent settings in pro- gramming mode Setting the water hardness).

U Switch-on rinse / Manual

U The switch-on rinse must be started manually.

U Switch-on rinse / Automatic

U The switch-on rinse is started automatically.

U Rinse the milk system / Manual after 10 min.

U You are prompted to rinse the milk system 10 minutes after preparation of a speciality coffee with milk.

U Rinse the milk system / Manual immediate

U You are prompted to rinse the milk system immediately after preparation of a speciality coffee with milk.

U Rinse the milk system / Automatic after 10 min.

U Milk system rinsing is automatically initiated 10  minutes after preparation of a speciality coffee with milk.

U Rinse the milk system / Automatic immediate

U Milk system rinsing is automatically initiated approx. 30 sec- onds after preparation of a speciality coffee with milk.

Example: Proceed as follows to make the machine prompt you to rinse the milk system immediately after preparing a speciality cof- fee with milk. Precondition: Please select product: is displayed.   O  T  Press the P button.

Maintenance status (1/5)   g  T  Turn the Rotary Switch until the programme item Machine

settings (3/5) is displayed. T  Press the Maintenance settings button.

Maintenance settings T  Press the Rinse the milk system button.

Rinse the milk system T  Press the Manual immediate button.

Maintenance settings

31

4 Permanent settings in programming mode

T  Press the Save button. Saved appears briefly on the display. Maintenance settings

  O  T  Press the P button to exit programming mode. Please select product:

The harder the water is, the more frequently the GIGA needs to be descaled. It is therefore important to set the water hardness accu- rately.

The water hardness can be adjusted on a continuous scale between 1 dH and 30 dH.

Precondition: Please select product: is displayed.   O  T  Press the P button.

Maintenance status (1/5)   g  T  Turn the Rotary Switch until the programme item Machine

settings (3/5) is displayed. T  Press the Maintenance settings button.

Maintenance settings T  Press the Water hardness button.

Water hardness T  Press the + or button to set the water hardness. T  Press the Save button.

Saved appears briefly on the display. Maintenance settings

  O  T  Press the P button to exit programming mode. Please select product:

In the programme item Machine settings (3/5) / Save energy you can permanently set an energy-saving mode (Energy Save Mode, E.S.M.):

U Save No

U All speciality coffees, speciality coffees with milk and hot water can be prepared without having to wait.

U Save Level 1

U After switching on, your GIGA is only ready for use for speci- ality coffees and hot water. Before you can prepare a special- ity coffee with milk, the machine must heat up.

Setting the water hardness

Energy-saving mode

32

4 Permanent settings in programming mode

U Soon after the last preparation, the GIGA stops heating up. After about 5 minutes the message Energy Save is dis- played.

U Save Level 2

U After switching on, your GIGA is ready for use for all special- ity coffees with and without milk, as well as hot water.

U Soon after the last preparation, the GIGA stops heating up. After about 5 minutes the message Energy Save is dis- played.

Example:  Proceed as follows to change the energy-saving mode from Save Level 1 to Save Level 2. Precondition: Please select product: is displayed.   O  T  Press the P button.

Maintenance status (1/5)   g  T  Turn the Rotary Switch until the programme item Machine

settings (3/5) is displayed. T  Press the Save energy button.

Save energy T  Press the Save Level 2 button. T  Press the Save button.

Saved appears briefly on the display. Machine settings (3/5)

  O  T  Press the P button to exit programming mode. Please select product:

You already set the time and date during first-time use. You can change this setting.

E For the time format, you can choose between 24  hrs and AM / PM (see Chapter 4 Permanent settings in programming mode Units).

Example: Proceed as follows to change the time. Precondition: Please select product: is displayed.   O  T  Press the P button.

Maintenance status (1/5)   g  T  Turn the Rotary Switch until the programme item Machine

settings (3/5) is displayed.

Time and date

33

4 Permanent settings in programming mode

T  Press the Time / date button. Time / date

T  Press the Time button. Time

T  Press the + or button to set the hours. T  Press the Save button. T  Press the + or button to set the minutes. T  Press the Save button.

Saved appears briefly on the display. Time / date

  O  T  Press the P button to exit programming mode. Please select product:

In the programme item Machine settings (3/5) / Timer you can set an individual switch-on and switch-off time for every day of the week.

E Automatic switch-on only works when the machine is switched on at the power switch.

E For the time format, you can choose between 24  hrs and AM / PM (see Chapter 4 Permanent settings in programming mode Units).

Example: Proceed as follows to set your GIGA to switch on and off at a time defined by you every day of the week. Precondition: Please select product: is displayed.   O  T  Press the P button.

Maintenance status (1/5)   g  T  Turn the Rotary Switch until the programme item Machine

settings (3/5) is displayed. T  Press the Timer button.

Timer T  Press the Monday button (example).

Monday T  Press the + or button to set the hours (for Switch

machine on). T  Press the button. T  Press the + or button to set the minutes (for Switch

machine on).

Timer

34

4 Permanent settings in programming mode

T  Press the button. T  Press the + or button to set the hours (for Switch

machine off). T  Press the button. T  Press the + or button to set the minutes (for Switch

machine off). T  Press the Every weekday button.

Saved appears briefly on the display. The switch-on and switch-off times you just set are adopted for every day of the week. Timer

  O  T  Press the P button to exit programming mode. Please select product:

By instructing your GIGA to automatically switch itself off, you can cut down your energy consumption. If this function is activated, your GIGA switches off automatically after the preset time following the last action on the machine.

You can set the automatic switch-off time to 15  minutes or 0.515 hours.

Precondition: Please select product: is displayed.   O  T  Press the P button.

Maintenance status (1/5)   g  T  Turn the Rotary Switch until the programme item Machine

settings (3/5) is displayed. T  Press the Timer button. T  Press the Next button. T  Press the Switch off after button.

Switch off after T  Press the + or button to change the setting. T  Press the Save button.

Saved appears briefly on the display. Timer

  O  T  Press the P button to exit programming mode. Please select product:

Automatic switch-off

35

4 Permanent settings in programming mode

In the programme item Machine settings (3/5)  / Units you can make the following settings:

U Unit for amount of water: ml or oz

U Time format: 24 hrs. or AM / PM

Example: Proceed as follows to change the unit for the amount of water from ml to oz. Precondition: Please select product: is displayed.   O  T  Press the P button.

Maintenance status (1/5)   g  T  Turn the Rotary Switch until the programme item Machine

settings (3/5) is displayed. T  Press the Units button.

Units T  Press the oz button. T  Press the Save button.

Saved appears briefly on the display. Machine settings (3/5)

  O  T  Press the P button to exit programming mode. Please select product:

In the programme item Machine settings (3/5)  / Factory setting you can reset various settings to their factory settings:

U All products

U The settings (amount of water, coffee strength, temperature etc.) for all products are reset to the factory settings.

U Machine

U All user settings (apart from the filter, water hardness and time and date settings) are reset to the factory settings. The GIGA then switches off.

U Empty system

U The system is emptied. Your GIGA then switches off.

Example: Proceed as follows to reset the values for all products to the factory settings. Precondition: Please select product: is displayed.   O  T  Press the P button.

Maintenance status (1/5)

Units

Restore factory settings

36

4 Permanent settings in programming mode

  g  T  Turn the Rotary Switch until the programme item Machine settings (3/5) is displayed.

T  Press the Factory setting button. Factory setting

T  Press the All products button. All products / Reset all products to the factory settings?

T  Press the Yes button. Saved appears briefly on the display. Factory setting

  O  T  Press the P button to exit programming mode. Please select product:

In this programme item you can set the language used by your GIGA.

Example: Proceed as follows to change the language from English to Deutsch. Precondition: Please select product: is displayed.   O  T  Press the P button.

Maintenance status (1/5)   g  T  Turn the Rotary Switch until the programme item Machine

settings (4/5) is displayed. T  Press the Choose language button.

Choose language

E To display more languages, press the Next button (bottom right).

T  Press the Deutsch button. Gespeichert appears briefly on the display. Gerteeinstellungen (4/5)

  O  T  Press the P button to exit programming mode. Bitte whlen Sie Ihr Produkt:

In the programme item Machine settings (4/5) / Display you can make the following settings:

U Brightness (as percentages)

U Contrast (high, normal, low)

U Backlight (backlighting; as percentages)

Language

Display settings

37

4 Permanent settings in programming mode

Example: Proceed as follows to change the brightness of the display. Precondition: Please select product: is displayed.   O  T  Press the P button.

Maintenance status (1/5)   g  T  Turn the Rotary Switch until the programme item Machine

settings (4/5) is displayed. T  Press the Display button.

Display T  Press the Brightness button. T  Press the + or button to change the setting. T  Press the Save button.

Saved appears briefly on the display. Display

  O  T  Press the P button to exit programming mode. Please select product:

In this programme item you can set the background for the display of your GIGA.

E The set background is only displayed on the start screen.

Precondition: Please select product: is displayed.   O  T  Press the P button.

Maintenance status (1/5)   g  T  Turn the Rotary Switch until the programme item Machine

settings (4/5) is displayed. T  Press the Colour scheme button.

Colour scheme T  Press the + or button to change the setting. T  Press the Save button.

Saved appears briefly on the display. Machine settings (4/5)

  O  T  Press the P button to exit programming mode. Please select product:

Background

38

4 Permanent settings in programming mode

In the programme item Machine settings (4/5) you can activate or deactivate the barista recipes. When the barista recipes are deacti- vated they no longer appear in the product selector.

Example: Proceed as follows to deactivate barista recipes. Precondition: Please select product: is displayed.   O  T  Press the P button.

Maintenance status (1/5)   g  T  Turn the Rotary Switch until the programme item Machine

settings (4/5) is displayed. T  Press the Barista recipes button.

Barista recipes T  Press the Inactive button. T  Press the Save button.

Saved appears briefly on the display. Machine settings (4/5)

  O  T  Press the P button to exit programming mode. Please select product:

In the programme item Information (5/5) you can view the follow- ing information:

U Product counter: Number of prepared speciality coffees, speciality coffees with milk and hot water

U Day counter: Number of prepared speciality coffees, special- ity coffees with milk and hot water. This counter can be reset to zero.

U Maintenance counter: Number of maintenance programmes performed (cleaning, descaling etc.)

U Version: Software version

Precondition: Please select product: is displayed.   O  T  Press the P button.

Maintenance status (1/5)   g  T  Turn the Rotary Switch until the programme item Informa-

tion (5/5) is displayed. T  Press the Product counter button.

Product counter and the number of products prepared is displayed.

Deactivating barista recipes

Querying information

39

4 Permanent settings in programming mode

E You can also view the number of products prepared in the product selector. To do this, turn the Rotary Switch. Press the button to exit the product selector view again.

T  Press any button or the Rotary Switch to exit the programme item. Information (5/5)

  O  T  Press the P button to exit programming mode. Please select product:

40

5 Maintenance

5 Maintenance

Your GIGA has the following integrated maintenance programmes:

U Rinsing the coffee system (Rinse the coffee system)

U Rinsing the milk system in the dual spout (Rinse the milk system)

U Cleaning the milk system in the dual spout (Clean the milk system)

U Changing the filter (Change the filter)

U Cleaning the machine (Clean)

U Descaling the machine (Descale) (only if filter is not acti- vated)

E Clean or descale the machine, rinse the milk system or change the filter when you are prompted to do so.

E Press the P button to view a list of the maintenance pro- grammes (Maintenance status (1/5)). When the bar is com- pletely filled with red, your GIGA will prompt you to perform the appropriate maintenance programme.

E In the interests of hygiene, you should clean the milk system daily when you have been preparing milk.

You can perform coffee system rinsing at any time.

Precondition: Please select product: is displayed. T  Place a receptacle under the dual spout.

  O  T  Press the P button. Maintenance status (1/5)

T  Press the Rinse the coffee system button. Machine is rinsing., water flows out of the dual spout. The rinse stops automatically. Please select product: appears on the display.

Rinsing the coffee system

41

5 Maintenance

Depending on the setting in programming mode, the GIGA prompts you to rinse the milk system or automatically performs rinsing fol- lowing milk preparation.

Example:  Proceed as follows to rinse the milk system when prompted to do so. Precondition:  Rinse the milk system. and the symbol c are dis- played.

T  Place a receptacle under the dual spout.   O  T  Press the P button.

Maintenance status (1/5) T  Press the Rinse the milk system button.

Milk system is being rinsed., water flows out of the dual spout. The rinse stops automatically. Please select product: appears on the display.

To ensure that the milk system in the dual spout always works prop- erly, you must clean it daily when you have been preparing milk.

If the wrong cleaning agent is used, the machine could be damaged and/or traces could be left behind in the water.

T  Use only original JURA maintenance products.

E JURA milk system cleaner is available from specialised dealers.

Precondition: Please select product: is displayed.   O  T  Press the P button.

Maintenance status (1/5) T  Press the Clean the milk system button. T  Press the Start button. T  Press the Start button again.

Cleaning agent for milk system. T  Pour 250 ml of fresh water into a receptacle and add one

capful of milk system cleaner. T  Immerse the milk pipe in the receptacle.

Rinsing the milk system

Cleaning the milk system

CAUTION

42

5 Maintenance

T  Place another receptacle under the dual spout. T  Press the Next button.

Milk system is being cleaned., water flows out of the dual spout. Water for cleaning milk system.

T  Rinse the receptacle thoroughly, fill it with 250 ml of fresh water and immerse the milk pipe in the water.

T  Empty the other receptacle and place it under the dual spout again.

T  Press the Next button. Milk system is being cleaned., the dual spout and the pipe are rinsed with fresh water. The operation stops automatically. Milk system cleaning complete. appears briefly on the display. Please select product:

The dual spout must be dismantled and rinsed daily if milk has been prepared to make sure it functions perfectly and also in the interests of hygiene.

T  Remove the milk pipe and rinse it thoroughly under running water.

T  Press the releasing devices and pull the cover of the dual spout up and off.

Dismantling and rinsing the dual spout

43

5 Maintenance

T  Carefully pull the bottom part of the milk system down and off.

T  Remove the milk system from the dual spout.

T  Remove the air intake pipe.

T  Dismantle the milk system into its individual parts. T  Rinse all the parts under running water. If there are severely

dried-on milk residues, firstly immerse the individual parts in a solution of 250 ml cold water and one capful of JURA milk system cleaner. Then rinse the parts thoroughly.

T  Reassemble the milk system. When doing this, note the arrows (circled in red in the picture) on the individual parts.

44

5 Maintenance

T  Fit the air intake pipe.

T  Fit the assembled individual parts back in the dual spout and press it firmly.

T  Attach the bottom part of the milk system to the part already inserted from below.

T  Fit the cover of the dual spout. It will click into place audibly.

T  Insert the milk pipe into the dual spout.

45

5 Maintenance

Your GIGA no longer has to be descaled if you are using the CLARIS Pro Blue filter cartridge. If the water hardness is 10 dH or more, we recommend using the filter cartridge. If you do not know the hard- ness of your water, you can find this out first (see Chapter 1 Prepar- ing and using for the first time Determining the water hardness).

If you did not activate the filter cartridge the first time you used the machine, you can do this now as follows.

E Perform the inserting the filter operation without any inter- ruptions. This will ensure that your GIGA always produces its best.

Precondition: Please select product: is displayed.   O  T  Press the P button.

Maintenance status (1/5)   g  T  Turn the Rotary Switch until the programme item Machine

settings (3/5) is displayed. T  Press the Maintenance settings button. T  Press the Filter button.

Filter T  Press the Active button. T  Press the Save button.

Saved appears briefly on the display. Insert filter. / Press the Rotary Switch.

T  Remove and empty the water tank. T  Open the filter holder and insert the filter cartridge into the

water tank, exerting slight pressure. T  Close the filter holder. It will click into place audibly. T  Fill the water tank with fresh, cold water and reinsert the

tank.   k  T  Press the Rotary Switch.

Filter is being rinsed., the filter is rinsed. Rinsing of the filter stops automatically. Empty drip tray. appears on the dis- play.

T  Empty the drip tray and coffee grounds container and put them back into the machine. Filter / Filter rinsing complete. The machine heats up. Please select product: appears on the display. Your GIGA is once more ready for use.

Inserting and activating the filter

46

5 Maintenance

E After 100  litres of water have flowed through or after two months, the filter will cease to work. Your GIGA will automati- cally prompt you to change the filter.

E If the CLARIS Pro Blue filter cartridge is not activated in pro- gramming mode, you will not be prompted to change the filter.

Example: Proceed as follows to change the filter when prompted to do so. Precondition: Change the filter and the c symbol are displayed.   O  T  Press the P button.

Maintenance status (1/5) T  Press the Change the filter button. T  Press the Start button. T  Press the Start button again.

Change filter. / Press the Rotary Switch. T  Remove and empty the water tank. T  Open the filter holder and remove the old CLARIS Pro Blue

filter cartridge. T  Insert the new filter cartridge into the water tank, exerting

slight pressure. T  Close the filter holder. It will click into place audibly. T  Fill the water tank with fresh, cold water and reinsert the

tank.   k  T  Press the Rotary Switch.

Filter is being rinsed., the filter is rinsed. Rinsing of the filter stops automatically. Empty drip tray. appears on the dis- play.

T  Empty the drip tray and coffee grounds container and put them back into the machine. Change the filter / Filter rinsing complete. The machine heats up. Please select product: appears on the display.

Changing the filter

47

5 Maintenance

After 220 preparations or 80 switch-on rinses, the GIGA will prompt you to clean it.

If the wrong cleaning agent is used, the machine could be damaged and/or traces could be left behind in the water.

T  Use only original JURA maintenance products.

E The cleaning programme lasts approximately 20 minutes. E Do not interrupt the cleaning programme. The quality of

cleaning will be impaired if you do so. E JURA cleaning tablets are available from specialised dealers.

Example: Proceed as follows to clean when prompted to do so. Precondition: Clean machine. and the symbol c are displayed.   O  T  Press the P button.

Maintenance status (1/5) T  Press the Clean button. T  Press the Start button. T  Press the Start button again.

Empty coffee grounds container. T  Empty the drip tray and coffee grounds container and put

them back into the machine. Press the Rotary Switch.

T  Place a receptacle under the dual spout.   k  T  Press the Rotary Switch.

Machine is being cleaned., water flows out of the dual spout. The operation is interrupted, Add cleaning tablet..

T  Open the cover of the filler funnel for ground coffee.

T  Insert a JURA cleaning tablet into the filler funnel. T  Close the cover of the filler funnel.

Press the Rotary Switch.   k  T  Press the Rotary Switch.

Machine is being cleaned., water flows out of the dual spout repeatedly. The operation is interrupted, Empty coffee grounds con- tainer..

Cleaning the machine

CAUTION

48

5 Maintenance

T  Empty the drip tray and coffee grounds container and put them back into the machine. Clean / Cleaning complete. Cleaning is now complete. Your GIGA is once more ready for use.

The GIGA builds up deposits of limescale over time and automati- cally prompts you to descale it when necessary. The degree of calci- fication depends on the hardness of your water.

E If you use a CLARIS Pro Blue filter cartridge and this is acti- vated, you will not be prompted to descale.

If the descaling agent comes into contact with the skin or eyes, this can cause irritation.

T  Avoid contact with the skin or eyes. T  Rinse off the descaling agent with clean water. Should you get

any descaling agent in your eye, see a doctor.

If the wrong descaling agent is used, the machine could be dam- aged and/or traces could be left behind in the water.

T  Use only original JURA maintenance products.

If the descaling operation is interrupted, there may be damage to the machine.

T  Allow the descaling programme to run to the end.

If the descaling agent comes into contact with sensitive surfaces (e.g. marble), damage cannot be ruled out.

T  Clean up any splashes immediately.

E The descaling programme lasts approximately 50 minutes. E JURA descaling tablets are available from specialised dealers.

Example: Proceed as follows to perform descaling when prompted to do so. Precondition: Decalcify machine. and the symbol c are displayed.   O  T  Press the P button.

Maintenance status (1/5) T  Press the Descale button.

Descaling the machine

J CAUTION

CAUTION

CAUTION

CAUTION

49

5 Maintenance

T  Press the Start button. T  Press the Start button again.

Empty drip tray. T  Empty the drip tray and coffee grounds container and put

them back into the machine. Pour descaling agent into water tank.

T  Remove and empty the water tank. T  Completely dissolve 4 JURA descaling tablets in a receptacle

holding 800 ml of water. This may take several minutes. T  Pour the solution into the empty water tank and insert it into

the machine. Press the Rotary Switch.

T  Place one receptacle under the dual spout and another under the hot-water spout.

  k  T  Press the Rotary Switch. Machine is being descaled., water flows repeatedly out of the dual spout and the hot-water spout. The operation stops automatically. Empty drip tray. appears on the display.

T  Empty both receptacles. T  Empty the drip tray and coffee grounds container and put

them back into the machine. Fill water tank.

T  Remove the water tank and rinse it thoroughly. T  Fill the water tank with fresh, cold water and reinsert the

tank. Press the Rotary Switch.

T  Place the receptacles back under the dual spout and the hot- water spout.

  k  T  Press the Rotary Switch. Machine is being descaled., water flows out of the dual spout and the hot-water spout. The operation stops automatically. Empty drip tray. appears on the display.

50

5 Maintenance

T  Empty the drip tray and coffee grounds container and put them back into the machine. Descale / Descaling complete. Descaling is now complete. Your GIGA is once more ready for use.

E If the descaling operation stops unexpectedly, rinse the water tank thoroughly.

Coffee beans may be covered with a slight oil film which remains on the walls of the bean container. These traces may negatively affect the coffee result. For this reason clean the bean container from time to time.

Precondition: Fill bean container. is displayed.   Q  T  Switch the machine off with the On/Off button.   3  T  Switch the machine off at the power switch.

T  Open the service cover on the back of the machine by press- ing above the JURA logo.

T  Push the red sliding catch completely to the rear to close the bean container.

T  Turn the blue locking device outwards. T  Remove the bean container. T  Remove the aroma preservation cover. T  Empty the bean container. T  Clean the bean container with a soft, dry cloth. T  Fit the bean container.

T  Turn the blue locking device inwards. T  Pull the red sliding catch completely forwards. T  Refit the service cover and fix it by pressing above the JURA

logo. It will click into place audibly. T  Fill the bean container with coffee beans and close the

aroma preservation cover.

Cleaning the bean container

51

5 Maintenance

Limescale deposits may form in the water tank. To ensure correct function of the machine, descale the water tank from time to time.

T  Remove the water tank. T  If you use a CLARIS Pro Blue filter cartridge, remove this. T  Completely fill the water tank and dissolve 3 JURA descaling

tablets in it. T  Leave the water tank with the descaling solution for several

hours (e.g. overnight). T  Empty the water tank and rinse it thoroughly. T  If you use a CLARIS Pro Blue filter cartridge, insert this again. T  Fill the water tank with fresh, cold water and reinsert the

tank.

Descaling the water tank

52

6 Display messages

6 Display messages

Message Cause/Result Action Fill water tank. The water tank is empty. You

cannot prepare any products. T Fill the water tank (see Chapter 1 Preparing and using for the first time Filling the water tank).

Empty coffee grounds container.

The coffee grounds container is full. You cannot prepare any products.

T Empty the coffee grounds container and the drip tray (see Chapter 3 Daily operation Daily maintenance).

Coffee grounds container not fitted.

The coffee grounds container is not fitted. You cannot prepare any products.

T Fit the coffee grounds container.

Empty drip tray. The drip tray is full. You cannot prepare any products.

T Empty the drip tray. T Clean and dry the metal contacts on the back of the drip tray.

Drip tray not fitted.

The drip tray is not inserted correctly or is not inserted at all. You cannot prepare any products.

T Fit the drip tray.

Press the Rotary Switch.

The system must be filled with water or the GIGA prompts you to continue a started maintenance programme.

T Turn the Rotary Switch to continue with the maintenance programme or to fill the system.

Fill bean container.

The bean container is empty. You cannot prepare any speciality coffees, but you can prepare hot water and milk.

T Fill the bean container (see Chapter 1 Preparing and using for the first time Filling the bean container).

Rinse the milk system.

The GIGA is prompting you to rinse the milk system.

T Press the P button and then the Rinse the milk system button to initiate milk system rinsing.

Clean machine. The GIGA is prompting you to clean it.

T Perform cleaning (see Chapter 5 Maintenance Cleaning the machine).

Decalcify machine.

The GIGA is prompting you to descale it.

T Perform descaling (see Chapter 5 Maintenance Descaling the machine ).

53

6 Display messages

Message Cause/Result Action Change filter. After 100 litres of water have flowed

through the CLARIS Pro Blue filter cartridge or after two months, it will cease to work. The GIGA is prompt- ing a filter change.

T Replace the CLARIS Pro Blue filter cartridge (see Chapter 5 Mainte- nance Changing the filter).

Spout is not fitted.

The dual spout or the cover of the dual spout is not fitted correctly.

T Fit the cover of the dual spout or the dual spout correctly.

Not enough ground coffee.

There is insufficient ground coffee in the machine; the GIGA stops the operation.

T The next time you prepare a beverage, add more ground coffee (see Chapter 2 Preparation Ground coffee).

54

7 Troubleshooting

7 Troubleshooting

Problem Cause/Result Action Insufficient foam is produced when the milk is frothed, or milk sprays from the dual spout.

The dual spout is dirty. T Rinse and clean the dual spout (see Chapter 5 Maintenance Cleaning the milk system).

Coffee only comes out in drips when it is being prepared.

Coffee or ground coffee has been ground too finely and is blocking the system. The same filter cartridge may have been used several times or the water hardness set incorrectly in the programming mode.

T Put the grinder on a coarser setting or use coarser ground coffee (see Chapter 4 Permanent settings in programming mode Setting the consistency of grind). T Perform descaling (see Chapter 5 Maintenance Descaling the machine).

Fill bean container. is not displayed although the bean container is empty.

The bean monitor is dirty. T Clean the bean container (see Chapter 5 Maintenance Cleaning the bean container).

Empty drip tray. is always displayed.

The metal contacts of the drip tray are dirty or wet.

T Clean and dry the metal contacts on the back of the drip tray.

Fill water tank. is displayed although the water tank is full.

The water tank float is trapped.

T Descale the water tank (see Chapter 5 Maintenance Descaling the water tank).

Error 2 is displayed. If the machine was exposed to the cold for a long period of time, heating is disabled for safety reasons.

T Warm the machine at room tempera- ture.

Other Error messages are displayed.

T Switch the GIGA off at the power switch. Contact customer support in your country (see Chapter 11 JURA contact details / Legal information).

E If you were unable to solve the problem, contact customer support in your country (see Chapter 11 JURA contact details / Legal information).

55

8 Transport and environmentally friendly disposal

8 Transport and environmentally friendly disposal

In order to protect the GIGA from frost during transport, the system must be emptied.

Precondition: Please select product: is displayed. T  Place one receptacle under the dual spout and another

under the hot-water spout.   O  T  Press the P button.

Maintenance status (1/5)   g  T  Turn the Rotary Switch until the programme item Machine

settings (3/5) is displayed. T  Press the Factory setting button.

Factory setting T  Press the Empty system button.

Empty system / Remove the water tank. T  Remove and empty the water tank.

Press the Rotary Switch.   k  T  Press the Rotary Switch.

System is emptying., water flows out of the dual spout and the hot-water spout. The operation stops automatically. Your GIGA is switched off.

Please dispose of old machines in an environmentally neutral way. H Old machines contain valuable, recyclable materials which should be recycled. Please therefore dispose of old machines via suitable collection systems.

Transport / Emptying the system

Disposal

56

9 Technical data

9 Technical data

Voltage 220240 V ~, 50 Hz Power 2300 W Airborne noise emitted LP < 70 dB (A) Ambient conditions Humidity max. 80%

Ambient temperature 1035 C

Conformity mark A

Energy consumption Save energy / Save No

approx. 30 Wh

Energy consumption Save energy / Save Level 1

approx. 12 Wh

Energy consumption Save energy / Save Level 2

approx. 15 Wh

Pump pressure static, max. 15 bar Holding capacity of water tank 5 l Holding capacity of bean container

1000 g

Holding capacity of coffee grounds container

max. 40 portions

Cable length approx. 1.1 m Weight approx. 18.3 kg Dimensions (W  H  D) 37 55 49.6 cm

Information for testers (repeat test in accordance with DIN VDE 0701-0702): The central grounding point (CGP) is located on the front of the machine below the JURA logo (turn JURA logo anti-clock- wise).

57

10 Index

10 Index

A Adding products to the start screen 28 Addresses 60 Adjusting the product settings 25 Aroma preservation cover

Bean container with aroma preservation cover 4

Automatic switch-off 33, 34 Automatic switch-on 33

B Background 37 Barista recipes 19

Deactivating 38 Preparation 20 Programming mode 38

Bean container Bean container with aroma preservation cover 4 Cleaning 50 Filling 11

Bus bar Technical data 56

Button On/Off button 5 P button (programming) 5

C Cappuccino 16 Cappuccino frother cleaning

Cleaning the milk system 41 Cappuccino frother rinsing

Rinsing the milk system 41 Changing a name 27 Changing the product assigned to a

button 28 CLARIS Pro Blue filter cartridge

Changing 46 Inserting and activating the filter 45

Classics 25 Cleaning

Bean container 50 Machine 47

Coffee 16 Coffee la carte 16 Coffee grounds container 4

Consistency of grind Setting the consistency of grind 29

Contact details 60 Cover

Service cover 5 Storage compartment 4 Water tank 4

Cup grille 4 Customer support 60

D Date 32 Descaling

Machine 48 Water tank 51

Display 5 Display messages 52 Display settings 36, 37 Disposal 55 Double product 17 Drip tray 4 Dual spout

Dismantling and cleaning 42 Height- and width-adjustable dual spout 4

E Emptying the system 55 Energy-saving mode 31 Errors

Troubleshooting 54 Espresso 16 Expert mode 25

F Factory settings

Restore factory settings 35 Filler funnel

Filler funnel for ground coffee 4 Filling

Bean container 11 Water tank 10

Filter Changing 46 Inserting and activating the filter 45

First-time use 11

58

10 Index

G Grinder

Setting the consistency of grind 29 Ground coffee 18

Measuring spoon for ground coffee 4

H Hotline 60 Hot water 21 Hot-water spout

Height-adjustable hot-water spout 4

I Instant coffee

Ground coffee 18 Internet 10

J JURA

Contact details 60 Internet 10

L Language 36 Latte macchiato 16 Locking device 5

M Machine

Cleaning 47 Descaling 48 Regular maintenance 23 Rinsing the coffee system 40 Setting up 10 Switching off 23 Switching on 22

Mains cable 4 Maintenance 40

Daily maintenance 22 Regular maintenance 23

Maintenance settings 30 Measuring spoon for ground coffee 4 Messages, display 52 Milk

Connecting milk 15 Milk system

Cleaning 41 Rinsing 41

P Permanently setting amounts for the cup

size 20 Permanent settings in programming

mode 24 Power switch 4 Preparation 16

At the touch of a button 17 Barista recipes 20 Cappuccino 16 Coffee 16 Espresso 16 Ground coffee 18 Hot water 21 Latte macchiato 16 Ristretto 16 Two speciality coffees 17 Using the product selector 18

Preparation options 16 At the touch of a button 17 Using the product selector 18

Problems Troubleshooting 54

Product selector 16, 18 Product settings 25

Adjusting 25 Programming mode 24

Adding products to the start screen 28 Automatic switch-off 34 Background 37 Barista recipes 38 Display settings 36 Energy-saving mode 31 Language 36 Maintenance settings 30 Product settings 25 Querying information 38 Renaming a product 27 Restore factory settings 35 Setting the consistency of grind 29 Setting the water hardness 31 Time and date 32 Timer 33 Units 35

Proper use 6

59

10 Index

Q Querying information 38 Quick installation 12

R Recipes

Barista recipes 19 Regular maintenance 23 Renaming a product 27 Rinsing the coffee system 40 Ristretto 16 Rotary Selection 16

Product selector 18 Rotary Switch 5

S Safety 6 Safety information 6 Service cover 5 Service socket 5 Settings

Maintenance settings 30 Permanent settings in programming mode 24

Setting up Setting up the machine 10

Sliding catch 5 Splash guard 4 Spout

Height-adjustable hot-water spout 4 Height- and width-adjustable dual spout 4

Standard installation 13 Switching off

Machine 23 Switching on

Machine 22 Switch-off

Automatic switch-off 33, 34 Switch-off time 33 Switch-on

Automatic switch-on 33 Switch-on time 33 Symbol description 3

T Technical data 56 Tel 60 Time 32 Time format

Programming mode 35 Timer 33 Transport 55 Troubleshooting 54 Two products 17

U Units 35 Use, First-time 11

V Ventilation slats 4

W Water hardness

Determining the water hardness 15 Setting the water hardness 31

Water tank 4 Descaling 51 Filling 10

Website 10

60

11 JURA contact details / Legal information

11 JURA contact details / Legal information

Your JURA service partner

JURA Elektroapparate AG Kaffeeweltstrasse 10 CH-4626 Niederbuchsiten Tel. +41 (0)62 38 98 233 www.jura.com

The machine complies with the following directives:

U 2006/42/EC  Machinery Directive

U 2014/30/EU  Electromagnetic Compatibility

U 2009/125/EC  Ecodesign Directive

U 2011/65/EU  RoHS Directive

We reserve the right to make technical changes. The diagrams used in these instructions for use are for illustration purposes only and do not represent the original colours of the machine. Some details of your GIGA may vary.

Your opinion is important

Manualsnet FAQs

If you want to find out how the Giga X3 Professional Jura works, you can view and download the Jura Giga X3 Professional Coffee Machine Instruction Manual on the Manualsnet website.

Yes, we have the Instruction Manual for Jura Giga X3 Professional as well as other Jura manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a Jura Giga X3 Professional. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Jura Giga X3 Professional Coffee Machine Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Jura Giga X3 Professional Coffee Machine Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Jura Giga X3 Professional Coffee Machine Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Jura Giga X3 Professional Coffee Machine Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Jura Giga X3 Professional Coffee Machine Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.