Jura F9 Coffee Machine Instruction Manual PDF

F9 Instructions for Use

2

Table of contents

Your F9

Control elements 4 Important information 6

Proper use ......................................................................................................................................................6 For your safety ...............................................................................................................................................6

1 Preparing and using for the first time 10 JURA on the Internet ....................................................................................................................................10 Setting up the machine ..............................................................................................................................10 Filling the bean container ...........................................................................................................................10 First-time use ................................................................................................................................................10 Determining the water hardness .............................................................................................................. 13 Connecting milk ...........................................................................................................................................14 Filling the water tank ...................................................................................................................................14

2 Preparation 15 Ways of preparing a beverage ...................................................................................................................15 Ristretto, espresso and coffee ....................................................................................................................16 Two ristretti, two espressi and two coffees .............................................................................................16 Latte macchiato, cappuccino and other speciality coffees with milk ................................................. 17 Ground coffee ...............................................................................................................................................18 Permanently setting the amount of water for the cup size .................................................................19 Adjusting the grinder .................................................................................................................................20 Hot water ......................................................................................................................................................20

3 Daily operation 21 Switching on the machine ..........................................................................................................................21 Daily maintenance .......................................................................................................................................21 Regular maintenance ................................................................................................................................. 22 Switching off the machine ......................................................................................................................... 22

4 Permanent settings in programming mode 23 Product settings ..........................................................................................................................................24 Adjusting the product settings .................................................................................................................24 Replacing products on the start screen ..................................................................................................25 Renaming a product ...................................................................................................................................26 Automatic switch-off .................................................................................................................................. 27 Energy-saving mode ..................................................................................................................................28 Maintenance settings .................................................................................................................................28 Setting the water hardness .......................................................................................................................29 Display settings ...........................................................................................................................................30 Unit for amount of water ...........................................................................................................................30 Restore factory settings ..............................................................................................................................31 Language .......................................................................................................................................................31 Querying information ................................................................................................................................ 32

3

Table of contents

Warnings

J WARNING J CAUTION

Always take note of any information marked with the words CAUTION or WARNING and a warning sign. The signal word WARNING draws your attention to potential serious injury, and the signal word CAUTION to potential minor injury.

CAUTION CAUTION draws your attention to potential damage to the machine.

Symbols used

T Prompt to take action. This symbol means that you are being prompted to perform some action.

E Information and tips to make it even easier to use your F9.

Espresso Display

Symbol description

5 Maintenance 33 Rinsing the machine ................................................................................................................................... 33 Rinsing the milk system .............................................................................................................................34 Cleaning the milk system ..........................................................................................................................34 Dismantling and rinsing the dual spout .................................................................................................35 Inserting and activating the filter .............................................................................................................36 Changing the filter ...................................................................................................................................... 37 Cleaning the machine ................................................................................................................................39 Descaling the machine ..............................................................................................................................40 Descaling the water tank ...........................................................................................................................42 Cleaning the bean container .....................................................................................................................42

6 Display messages 43 7 Troubleshooting 44 8 Transport and environmentally friendly disposal 45

Transport / Emptying the system .............................................................................................................45 Disposal .........................................................................................................................................................45

9 Technical data 46 10 Index 47 11 JURA contact details / Legal information 52

4

Control elements

Control elements

2

7

1

4

3

6

5

14

13

12

11

10

8

9

1 Bean container with aroma preservation cover

2 Water tank cover 3 Water tank 4 Power switch and mains cable  

(back of the machine) 5 Coffee grounds container 6 Drip tray 7 Cup grille

8 Filler funnel cover 9 Filler funnel for ground coffee 10 Storage compartment cover 11 Grinder adjustment switch 12 Measuring spoon for ground coffee 13 Hot-water spout 14 Height-adjustable dual spout

5

Control elements

P

31 2

4

6

5

Top of the machine 1 Q On/Off button 2 g Rotary Switch 3 O P button (programming)

Front 4 Display 5 Multi-function buttons (button function

depends on what is shown in the display) 6 l Switch for hot water preparation

6

Important information

Important information

The machine is designed and intended for private domestic use. It should only be used for coffee preparation and to heat milk and water. Use for any other purpose will be deemed improper. JURA Elektroapparate AG cannot accept any responsibil- ity for the consequences of improper use.

Before using the machine read these instructions for use thoroughly and completely and comply with the instructions they contain. A warranty ser- vice is not applicable for damage or defects caused by non-compliance with the instructions for use. Keep these instructions for use close to the machine and pass them on to the next user.

Please carefully read and observe the important safety information set out below.

To avoid danger of potentially fatal electric shock: U Never use a machine which is damaged or has

a defective mains cable. U In the event of signs of damage, for example if

there is a smell of burning, unplug the machine immediately from the mains supply and con- tact JURA service.

U If the mains cable of this machine is damaged, it must be repaired either directly by JURA or by an authorised JURA service centre.

U Make sure that the F9 and the mains cable are not located close to hot surfaces.

U Be careful to ensure that the mains cable is not trapped and does not rub against sharp edges.

Proper use

For your safety

J

7

Important information

U Never open and repair the machine yourself. Do not modify the machine in any way that is not described in these instructions for use. The machine contains live parts. If opened, there is a danger of potentially fatal injury. Repairs may only be carried out by authorised JURA service centres, using original spare parts and accessories.

U To completely and safely disconnect the machine from the power supply, first switch off the F9 using the On/Off button and then at the power switch. Only then should you remove the mains plug from the power socket.

There is a risk of scalds or burns on the spouts. U Place the machine out of the reach of children. U Do not touch any hot parts. Use the handles

provided.

A defective machine is not safe and could cause injury or fire. To avoid damage and any associated risk of injury or fire:

U Never allow the mains cable to loosely hang down. The mains cable could pose a tripping hazard or become damaged.

U Protect the F9 from environmental influences such as rain, frost and direct sunlight.

U Do not immerse the F9, mains cable or connections in water.

U Do not put the F9 or any individual parts in the dishwasher.

U Switch your F9 off at the power switch before any cleaning operation. Always wipe the F9 with a damp cloth rather than a wet one, and protect it from prolonged exposure to water splash.

8

Important information

U Only connect the machine to the mains volt- age in accordance with the information on the rating plate. The rating plate is located on the underside of your F9. Further technical data is provided in these instructions for use (see Chapter 9 Technical data).

U Connect the F9 directly to a domestic power socket. Using multi-socket adapters or exten- sion cords may cause overheating.

U Please only use original JURA maintenance products. Use of products that are not explic- itly recommended by JURA could damage the F9.

U Do not use any coffee beans treated with addi- tives or caramelised coffee beans.

U Only fill the water tank with fresh, cold water. U Switch the machine off at the power switch if

you are going to be absent for a longer period of time.

U Children may not clean or service the machine unless supervised by a responsible person.

U Do not allow children to play with the machine. U Keep children under the age of 8 away from

the machine, or supervise them constantly. U Children aged 8 and over may only operate

the machine without supervision if they have been instructed in how to use it safely. Chil- dren must be able to recognise and under- stand the potential dangers arising from incor- rect use.

9

Important information

People, including children, who U do not have the physical, sensory or mental

capabilities to use the machine safely or U are inexperienced or lack knowledge in how to

use the machine safely must be supervised by a responsible person when using it, or must be instructed in how to use it cor- rectly.

Safety when handling the CLARIS Blue filter cartridge:

U Filter cartridges should be kept out of the reach of children.

U Store filter cartridges in a dry place in the sealed packaging.

U Protect cartridges from heat and direct sun- light.

U Do not use damaged filter cartridges. U Do not open filter cartridges.

10

1 Preparing and using for the first time

1 Preparing and using for the first time

Visit us on the Internet. You can download short operating instruc- tions for your machine from the JURA website (www.jura.com). You will also find interesting and up-to-date information on your F9 and on every aspect of coffee.

When setting up your F9, please note the following:

U Place the F9 on a horizontal surface that is not sensitive to water.

U Choose a spot for your F9 which protects the machine against overheating. Ensure that the ventilation slots are not covered.

Coffee beans which have been treated with additives (e.g. sugar), ground coffee or freeze-dried coffee will damage the grinder.

T  Only use roasted, untreated coffee beans to fill the bean con- tainer.

T  Remove the aroma preservation cover. T  Remove any dirt or foreign objects from inside the bean

container. T  Fill the bean container with coffee beans and close the

aroma preservation cover.

When using the machine for the first time, you can choose whether you want to operate F9 with or without the CLARIS Blue filter cartridge. If the water hardness is 10 dH or more, we recommend using the filter cartridge. If you do not know the hardness of your water, you can find this out first (see Chapter 1 Preparing and using for the first time Determining the water hardness).

JURA on the Internet

Setting up the machine

Filling the bean container

CAUTION

First-time use

11

1 Preparing and using for the first time

If the machine is operated with a defective mains cable, there is a danger of potentially fatal electric shock.

T  Never use a machine which is damaged or has a defective mains cable.

Precondition: The bean container has been filled. T  Insert the mains plug into a power socket.

  3  T  Switch on the F9 using the power switch on the back of the machine.

  Q  T  Press the On/Off button to switch the F9 on. The display shows the languages you can choose from.

E To display more languages, press the   >  button (bottom right).

T  Press the button that corresponds to the language you want, e.g. English. Saved appears briefly on the display to confirm the setting. Use filter

E Now decide whether you want to operate your F9 with or without a CLARIS Blue filter cartridge.

Milk, sparkling mineral water or other liquids can damage the water tank or the machine.

T  Only fill the water tank with fresh, cold water.

T  Press the Active button. T  Press the Save button.

Saved appears briefly on the display. Insert filter

T  Remove the water tank and rinse it with cold water. T  Open the filter holder and insert the filter cartridge into the

water tank, exerting slight pressure. T  Close the filter holder. It will click into place audibly.

E After two months, the filter will cease to work. Set the date on the date plate on the filter holder in the water tank.

J WARNING

First-time use with filter cartridge activation

CAUTION

12

1 Preparing and using for the first time

T  Fill the water tank with fresh, cold water and reinsert the tank.

T  Press the Next button. Switch open

T  Place a receptacle under the hot-water spout and dual spout.   l  T  Turn the switch to the m position.

Filter is being  rinsed, water flows out of the hot-water spout.

E You can interrupt rinsing of the filter at any time. To do this, turn the switch clockwise. Turn the switch anticlockwise to continue rinsing the filter.

E The water may be slightly discoloured. This is not harmful to health and does not affect the taste.

Rinsing of the filter stops automatically after approximately 300 ml. Switch close appears on the display.

  y  T  Turn the switch to the  position. System is filling, the system fills up with water. Machine is heating, the machine heats up. Machine is rinsing, the system is rinsed. The rinse stops automatically. Please select product appears on the display. Your F9 is ready for use.

E The display shows the products you can prepare.

Milk, sparkling mineral water or other liquids can damage the water tank or the machine.

T  Only fill the water tank with fresh, cold water.

T  Press the Inactive button. T  Press the Save button.

Saved appears briefly on the display. Water hardness

E If you do not know the hardness of your water, you must find this out first (see Chapter 1 Preparing and using for the first time Determining the water hardness).

First-time use without filter cartridge activation

CAUTION

13

1 Preparing and using for the first time

  g  T  Turn the Rotary Switch to change the water hardness set- ting, e.g. to 25 dH.

T  Press the Save button. Saved appears briefly on the display. Fill water tank.

T  Remove the water tank and rinse it with cold water. T  Fill the water tank with fresh, cold water and reinsert the

tank. Switch open

T  Place a receptacle under the hot-water spout and dual spout.   l  T  Turn the switch to the m position.

System is filling, water flows out of the hot-water spout. The operation stops automatically. Switch close appears on the display.

  y  T  Turn the switch to the  position. System is filling, the system fills up with water. Machine is heating, the machine heats up. Machine is rinsing, the system is rinsed. The rinse stops automatically. Please select product appears on the display. Your F9 is ready for use.

E The display shows the products you can prepare.

You can find out what the water hardness is by using the Aquadur test strip supplied as standard.

T  Hold the test strip briefly (for 1 second) under flowing water. Shake off the water.

T  Wait for about 1 minute. T  You will then be able to read the degree of water hardness

from the discolouration of the Aquadur test strip and the description on the packaging.

Determining the water hardness

14

1 Preparing and using for the first time

Your F9 creates fine, creamy, feather-light milk foam with a perfect consistency. The most important requirement for frothing milk is a milk temperature of 48 C. We would therefore recommend using a milk cooler or a vacuum milk container.

T  Remove the protective cover from the dual spout.

T  Connect the milk pipe to the dual spout. T  Connect the other end of the milk pipe to a milk container

or immerse it in a milk carton.

Daily maintenance of the machine and hygiene when handling milk, coffee and water are key to a perfect coffee result in the cup every time. You should therefore change the water daily.

Milk, sparkling mineral water or other liquids can damage the water tank or the machine.

T  Only fill the water tank with fresh, cold water.

T  Open the water tank cover. T  Remove the water tank and rinse it with cold water. T  Fill the water tank with fresh, cold water and reinsert the

tank. T  Close the water tank cover.

Connecting milk

Filling the water tank

CAUTION

15

2 Preparation

2 Preparation

E You can stop the machine at any time while a speciality coffee or hot water is being prepared. Just press any button (for a speciality coffee) or return the switch to its original position (for hot water preparation).

E During the grinding operation you can select the coffee strength of single products by turning the Rotary Switch g.

E During preparation, you can change the preset amount of water or milk foam by turning the Rotary Switch g.

E You can follow the current status of preparation on the display.

Coffee tastes best served hot. A cold porcelain cup cools the bever- age and impairs the taste. We therefore recommend prewarming the cups. The full coffee aroma can develop only in prewarmed cups. You can purchase a JURA cup warmer from your specialised dealer.

You can make permanent settings for all products in programming mode (see Chapter 4 Permanent settings in programming mode Adjusting the product settings).

The F9 offers various ways of preparing a speciality coffee, milk foam or hot water:

U Preparation using the start screen: Simply press the corre- sponding preparation button for the product shown on the display (start screen) that you want. The following products are displayed as standard on the start screen:

U Espresso

U Coffee

U Flat white

U Latte macchiato

U Using the product selector view (Rotary Selection): Only some of the products you can prepare are shown on the start screen. As soon as you turn the Rotary Switch, more products are displayed in a product selector view. Turn the Rotary Switch to bring the product you want into focus. Start preparation by pressing the Rotary Switch or the Prepare button.

Ways of preparing a beverage

16

2 Preparation

The following additional products are shown in the product selector view:

U Ristretto

U 2 ristretti

U 2 espressi

U 2 coffees

U Special

U Cappuccino

U Macchiato

U Caff latte

U Portion milk foam

E The product selector view disappears automatically after 10 seconds if no preparation is started.

E You have the option of replacing the four products on the start screen with your personal favourites (see Chapter 4 Perma- nent settings in programming mode Replacing products on the start screen). Please note that the descriptions provided in the following sections always refer to the default settings.

Example: Proceed as follows to prepare one coffee. Precondition: Please select product is displayed.

T  Place a cup under the dual spout. T  Press the Coffee button.

Preparation starts. Coffee and the coffee strength are dis- played. The preset amount of water for coffee flows into the cup. Preparation stops automatically. Please select product appears on the display.

There are several ways of preparing two speciality coffees.

U Using the product selector view:

U Bring one of the double products 2 ristretti, 2 espressi or 2 coffees into focus and press the Rotary Switch or the but- ton Prepare.

U When preparing a single product:

U Press the single product button twice within 2 seconds to start preparing the relevant double product.

Ristretto, espresso and coffee

Two ristretti, two espressi and two coffees

17

2 Preparation

Example: Proceed as follows to prepare two coffees (using product selector view). Precondition: The start screen is displayed.

T  Place two cups under the dual spout.   g  T  Turn the Rotary Switch to view the product selector.   g  T  Turn the Rotary Switch until the 2 coffees product is in

focus.   k  T  Press the Rotary Switch to start preparation.

Coffee preparation starts. The preset amount of water for coffee flows into the cups. Preparation stops automatically. Your F9 is once more ready for use.

Your F9 prepares latte macchiato, cappuccino, flat white and other speciality coffees with milk at the touch of a button. There is no need to move the glass or cup.

Example: Proceed as follows to prepare one latte macchiato. Precondition: Please select product is displayed. Milk is connected to the dual spout.

T  Place a glass under the dual spout. T  Press the Latte macchiato button.

Latte macchiato, the preset amount of milk foam flows into the glass.

E There is a short interval while the hot milk separates from the milk foam. This allows the typical layers of a latte macchiato to form.

Coffee preparation starts. The preset amount of water for espresso flows into the glass. Preparation stops automati- cally. Please select product appears on the display.

To ensure that the milk system in the dual spout always works prop- erly, you must clean it daily (see Chapter 5 Maintenance Cleaning the milk system).

Latte macchiato, cappuccino and other speciality coffees with milk

18

2 Preparation

You can choose to use a second coffee variety, for example decaf- feinated coffee, with the filter funnel for ground coffee.

E Never add more than two level measuring spoons of ground coffee.

E Use ground coffee which is not ground too finely. Very fine coffee can block up the system so that the coffee only comes out in drips.

E If you did not fill the machine with a sufficient amount of ground coffee, Not enough ground coffee is displayed and the F9 stops the operation.

E The desired speciality coffee must be prepared within approx- imately one minute after filling with the ground coffee. Oth- erwise the F9 stops the operation and is once more ready for use.

All speciality coffees with ground coffee are always prepared follow- ing the same model.

Example: Proceed as follows to prepare one espresso using ground coffee. Precondition: Please select product is displayed.

T  Place an espresso cup under the coffee spout. T  Open the cover of the filler funnel for ground coffee.

Please add ground coffee T  Place one level measuring spoon of ground coffee into the

filler funnel. T  Close the cover of the filler funnel.

Please select product T  Press the Espresso button.

Preparation starts. Espresso, the preset amount of water for espresso flows into the cup. Preparation stops automatically. Please select product appears on the display.

Ground coffee

19

2 Preparation

It is easy to permanently adjust the amount of water for all single products to the cup size. Adjust the amount once as shown in the following example. Every time you prepare a drink in the future, this amount will be dispensed.

Example:  Proceed as follows to permanently set the amount of water for one coffee. Precondition: Please select product is displayed.

T  Place a cup under the dual spout. T  Press and hold the Coffee button until Enough coffee?

Press button appears. T  Release the Coffee button.

Preparation starts and the coffee flows into the cup. T  Press any button as soon as there is sufficient coffee in the

cup. Preparation stops. Saved appears briefly on the display. The set amount of water for one coffee is permanently stored. Please select product appears on the display.

E You can alter this setting at any time by repeating the above procedure.

E The amount can be permanently adjusted to the cup size for the products shown in the product selector too. To do this, press and hold the Rotary Switch k until Enough coffee? Press button appears.

E You can also permanently set the amount of water for all spe- ciality coffees and hot water in programming mode (see Chapter 4 Permanent settings in programming mode Adjusting the product settings).

Permanently setting the amount of water for the cup size

20

2 Preparation

You can adjust the grinder on a continuous scale to suit the degree of roast of your coffee.

If you adjust the consistency of grind when the grinder is not oper- ating, the grinder adjustment switch could be damaged.

T  Only adjust the consistency of grind when the grinder is run- ning.

The consistency of grind is correct if the coffee flows regularly from the coffee spout. In addition a fine, thick crema forms.

Example:  Proceed as follows to change the consistency of grind during the preparation of an espresso.

T  Place a cup under the coffee spout. T  Open the storage compartment cover. T  Press the Espresso button to start preparation. T  Turn the grinder adjustment switch to the desired position

while the grinder is running. The preset amount of water flows into the cup. Preparation stops automatically.

T  Close the storage compartment cover.

There is a danger of scalding from hot water splashes. T  Avoid direct contact with the skin.

Precondition: Please select product is displayed. T  Place a cup under the hot-water spout.

  l  T  Turn the switch to the m position. Hot water, the preset amount of water flows into the cup. Preparation stops automatically. Switch close

  y  T  Turn the switch to the  position. Please select product appears on the display.

Adjusting the grinder

CAUTION

Hot water

J CAUTION

21

3 Daily operation

3 Daily operation

Daily maintenance of the machine and hygiene when handling milk, coffee and water are key to a perfect coffee result in the cup every time. You should therefore change the water daily.

Precondition: Your F9 is switched on at the power switch. T  Place a receptacle under the dual spout.

  Q  T  Press the On/Off button to switch the F9 on. Welcome to JURA Machine is heating Machine is rinsing, the system is rinsed. The rinse stops automatically. Please select product appears on the display. Your F9 is ready for use.

To ensure that you get many years of reliable service out of your F9 and to guarantee the optimum coffee quality, the machine requires daily maintenance.

T  Pull out the drip tray. T  Empty the coffee grounds container and the drip tray. Rinse

them both with warm water.

E Always empty the coffee grounds container when the machine is switched on. This is the only way of resetting the coffee grounds counter.

T  Refit the coffee grounds container and the drip tray. T  Rinse the water tank with clean water. T  Remove the milk pipe and rinse it thoroughly under running

water. T  Dismantle and rinse the dual spout (see Chapter 5 Mainte-

nance Dismantling and rinsing the dual spout). T  Wipe the surface of the machine with a clean, soft, damp

cloth (e.g. microfibre cloth).

Switching on the machine

Daily maintenance

22

3 Daily operation

Carry out the following maintenance actions regularly or as requi- red:

U In the interests of hygiene, we recommend changing the milk pipe on a regular basis (approximately every 3 months). Replacement pipes are available from specialised dealers (JURA original accessory set for frothers).

U Clean the inside of the water tank, e.g. with a brush. Further information about the water tank is provided in these instruc- tions for use (see Chapter 5 Maintenance Descaling the water tank).

U Traces of milk and coffee may stick to the top and bottom of the cup grille. If this happens, clean the cup grille.

When the F9 is switched off, the system is automatically rinsed if a speciality coffee has been prepared.

Precondition: Please select product is displayed (or Rinse the milk system if milk has been prepared).

T  Place a receptacle under the dual spout.   Q  T  Press the On/Off button.

If milk has been prepared, the milk system is first rinsed (Milk system is being rinsed). Machine is rinsing, the system rinses itself. The operation stops automatically. Your F9 is switched off.

E When the F9 is switched off with the On/Off button, the machine consumes less than 0.1  W of standby energy. The machine can be completely disconnected from the power supply using the power switch.

Regular maintenance

Switching off the machine

23

4 Permanent settings in programming mode

4 Permanent settings in programming mode

Press the P button to enter programming mode. You can navigate through the programme items and permanently save the required settings simply by turning the Rotary Switch and using the multi- function buttons. The following settings can be made:

Programme item Sub-item Explanation Maintenance status (1/7 and 2/7)

Clean, Change the filter (only if filter is activated), Descale (only if filter is not activated), Cappuccino cleaning, Rinse the coffee system, Rinse the milk system

T Start the required maintenance pro- gramme here.

Product settings (3/7)

Expert mode, Factory setting

T Select your settings for speciality coffees and hot water. T Reset the settings for single products to their factory setting.

Machine settings (4/7)

Choose language, Switch off after, Save energy, Factory setting

T Select your language. T Set the time after which the F9 should switch off automatically. T Select an energy-saving mode. T Reset the machine to its factory setting.

Machine settings (5/7)

Units, Display

T Select the unit for the amount of water. T Change the display settings.

Maintenance settings (6/7)

Use filter, Water hardness (only if filter is not activated), Switch-on rinse

T Indicate whether you are operating your F9 with or without a CLARIS Blue filter cartridge. T Adjust the water hardness. T Change the settings for switch-on rinse.

Information (7/7) Product counter, Maintenance counter, Version

T Keep track of all products prepared and view the number of maintenance pro- grammes performed.

24

4 Permanent settings in programming mode

In the programme item Product settings (3/7) you can make the following settings:

U Expert mode

U Set individual settings for all speciality coffees, milk and hot water (see Chapter 4 Permanent settings in programming mode Adjusting the product settings).

U Replace the products on the start screen with your favour- ites (see Chapter 4 Permanent settings in programming mode Replacing products on the start screen).

U Change the names of individual products (see Chapter 4 Permanent settings in programming mode Renaming a product).

U Factory setting

U Reset the set values for individual products to their factory setting.

In the programme item Product settings (3/7) / Expert mode you can make individual settings for all speciality coffees and hot water. The following permanent settings can be made:

Product Coffee strength Amount More settings Ristretto, Espresso, Coffee, Special coffee

8 levels Amount of coffee: 25 ml  240 ml

Temperature (normal, high), Product name

2 ristretti, 2 espressi, 2 coffees

Amount of coffee: The amount set for the single product is doubled.

Temperature (as for single product), Product name

Cappuccino, Latte macchiato, Espresso macchiato, Caff latte, Flat white

8 levels Amount of coffee: 25 ml  240 ml Milk foam: 0 sec.  120 sec. Interval: 0 sec.  120 sec. (not for caff latte and flat white)

Temperature (normal, high), Product name

Portion of milk foam

Milk foam: 0 sec.  120 sec. Product name

Hot water Water: 25 ml  450 ml Temperature (low, normal, high), Product name

Product settings

Adjusting the product settings

25

4 Permanent settings in programming mode

Permanent settings in programming mode always follow the same model.

Example: Proceed as follows to change the coffee strength for one coffee. Precondition: Please select product is displayed.   O  T  Press the P button.

Maintenance status (1/7)   g  T  Turn the Rotary Switch until Product settings (3/7) is dis-

played. T  Press the Expert mode button.

Expert mode

E Next select the button of the product for which you would like to make settings. No product is prepared at this point.

T  Press the   >  button (bottom right) until Coffee is dis- played.

T  Press the Coffee button. Coffee

T  Press the Coffee strength button. Coffee / Coffee strength

  g  T  Turn the Rotary Switch to change the coffee strength set- ting.

T  Press the Save button. Saved appears briefly on the display. Coffee

  O  T  Press the P button to exit programming mode. Please select product

You have the option of replacing the four products on the start screen with your personal favourites.

Example:  Proceed as follows to replace Latte macchiato on the start screen with Macchiato. Precondition: Please select product is displayed.   O  T  Press the P button.

Maintenance status (1/7)   g  T  Turn the Rotary Switch until Product settings (3/7) is dis-

played.

Replacing products on the start screen

26

4 Permanent settings in programming mode

T  Press the Expert mode button. Expert mode

T  Press the   >  button (bottom right) several times until Macchiato is displayed.

T  Press the Macchiato button. Macchiato

  g  T  Press the  >  button (bottom right) until Add to favourites is displayed.

T  Press the Add to favourites button. Select position

T  Press the Latte macchiato button. Select position / Do you want to replace the current product?

T  Press the Yes button. Saved appears briefly on the display. Macchiato

  O  T  Press the P button to exit programming mode. Please select product

In the programme item Product settings / Expert mode you can rename all of the products.

Example:  Proceed as follows to change the product name of Espresso. Precondition: Please select product is displayed.   O  T  Press the P button.

Maintenance status (1/7)   g  T  Turn the Rotary Switch until Product settings (3/7) is dis-

played. T  Press the Expert mode button.

Expert mode T  Press the  >  button (bottom right) until Espresso is dis-

played. T  Press the Espresso button.

Espresso T  Press the  >  button (bottom right) until Product name is

displayed.

Renaming a product

27

4 Permanent settings in programming mode

T  Press the Product name button. The available letters, numbers and special characters appear on the display.

E By pressing the abc/ABC button, you can switch between lower and upper case letters.

  g  T  Turn the Rotary Switch until the letter you want is high- lighted.

  k  T  Press the Rotary Switch to confirm the letter. T  Continue until the new product name you want is displayed.

E Please note that there is a maximum text length.

T  Press the Save button. Saved appears briefly on the display. The new product name is displayed.

  O  T  Press the P button to exit programming mode. Please select product

By instructing your F9 to automatically switch itself off, you can cut down your energy consumption. If this function is activated, your F9 switches off automatically after the preset time following the last action on the machine.

You can set the automatic switch-off to 15 minutes, 30 minutes or 19 hours.

Precondition: Please select product is displayed.   O  T  Press the P button.

Maintenance status (1/7)   g  T  Turn the Rotary Switch until Machine settings (4/7) is dis-

played. T  Press the Switch off after button.

Switch off after   g  T  Turn the Rotary Switch to change the switch-off time (e.g. to

2 hrs.). T  Press the Save button.

Saved appears briefly on the display. Machine settings

  O  T  Press the P button to exit programming mode. Please select product

Automatic switch-off

28

4 Permanent settings in programming mode

In the programme item Machine settings (4/7) / Save energy you can permanently set an energy-saving mode (Energy Save Mode, E.S.M.):

U Active

U Soon after the last preparation, the F9 stops heating up. After about 5 minutes the message Energy Save is dis- played.

U Before you can prepare a speciality coffee, speciality coffee with milk, or hot water, the machine must heat up.

U Inactive

U All speciality coffees, speciality coffees with milk and hot water can be prepared without having to wait.

Example:  Proceed as follows to change the energy-saving mode from Active to Inactive. Precondition: Please select product is displayed.   O  T  Press the P button.

Maintenance status (1/7)   g  T  Turn the Rotary Switch until Machine settings (4/7) is dis-

played. T  Press the Save energy button.

Save energy T  Press the Inactive button. T  Press the Save button.

Saved appears briefly on the display. Machine settings

  O  T  Press the P button to exit programming mode. Please select product

In the programme item Maintenance settings (6/7) you can make the following settings:

U Use filter

U Activate the CLARIS Blue filter cartridge (see Chapter 5 Maintenance Inserting and activating the filter).

U Water hardness (only if filter is not activated)

U If you do not have a filter cartridge, you will need to set the water hardness (see Chapter 4 Permanent settings in pro- gramming mode Setting the water hardness).

Energy-saving mode

Maintenance settings

29

4 Permanent settings in programming mode

U Switch-on rinse

U Manual: The switch-on rinse must be started manually.

U Automatic: The switch-on rinse is started automatically.

Example:  Proceed as follows to specify that the switch-on rinse should be started manually. Precondition: Please select product is displayed.   O  T  Press the P button.

Maintenance status (1/7)   g  T  Turn the Rotary Switch until Maintenance settings (6/7) is

displayed. T  Press the Switch-on rinse button.

Switch-on rinse T  Press the Manual button. T  Press the Save button.

Saved appears briefly on the display. Maintenance settings

  O  T  Press the P button to exit programming mode. Please select product

E If you are using the CLARIS Blue filter cartridge and have acti- vated it, it is not possible to set the water hardness.

The harder the water is, the more frequently the F9 needs to be descaled. It is therefore important to set the water hardness accu- rately.

The water hardness can be adjusted on a continuous scale between 1 dH and 30 dH.

Precondition: Please select product is displayed.   O  T  Press the P button.

Maintenance status (1/7)   g  T  Turn the Rotary Switch until Maintenance settings (6/7) is

displayed. T  Press the Water hardness button.

Water hardness   g  T  Turn the Rotary Switch to adjust the water hardness.

T  Press the Save button. Saved appears briefly on the display. Maintenance settings

Setting the water hardness

30

4 Permanent settings in programming mode

  O  T  Press the P button to exit programming mode. Please select product

In the programme item Machine settings (5/7)  / Display you can set the display brightness and contrast (as a percentage).

Precondition: Please select product is displayed.   O  T  Press the P button.

Maintenance status (1/7)   g  T  Turn the Rotary Switch until Machine settings (5/7) is dis-

played. T  Press the Display button.

Display   g  T  Turn the Rotary Switch to change the display setting.

T  Press the Save button. Saved appears briefly on the display. Machine settings

  O  T  Press the P button to exit programming mode. Please select product

In the programme item Machine settings (5/7)  / Units you can select the unit used for the amount of water.

Example: Proceed as follows to change the unit for the amount of water from ml to oz. Precondition: Please select product is displayed.   O  T  Press the P button.

Maintenance status (1/7)   g  T  Turn the Rotary Switch until Machine settings (5/7) is dis-

played. T  Press the Units button.

Units T  Press the oz button. T  Press the Save button.

Saved appears briefly on the display. Machine settings

  O  T  Press the P button to exit programming mode. Please select product

Display settings

Unit for amount of water

31

4 Permanent settings in programming mode

In the programme item Machine settings (4/7) / Factory setting the machine can be reset to its factory setting: All user settings (apart from the filter and water hardness) are reset to factory set- tings. Your F9 then switches off.

Precondition: Please select product is displayed.   O  T  Press the P button.

Maintenance status (1/7)   g  T  Turn the Rotary Switch until Machine settings (4/7) is dis-

played. T  Press the Factory setting button.

Factory setting / Reset the machine to the factory set- tings?

T  Press the Yes button. Saved appears briefly on the display. Your F9 is switched off.

In this programme item you can set the language used by your F9.

Example: Proceed as follows to change the language from English to Deutsch. Precondition: Please select product is displayed.   O  T  Press the P button.

Maintenance status (1/7)   g  T  Turn the Rotary Switch until Machine settings (4/7) is dis-

played. T  Press the Choose language button.

Choose language

E To display more languages, press the   >  button (bottom right).

T  Press the Deutsch button. Gespeichert appears briefly on the display. Gerteeinstellungen

  O  T  Press the P button to exit programming mode. Bitte whlen

Restore factory settings

Language

32

4 Permanent settings in programming mode

In the programme item Information (7/7) you can view the follow- ing information:

U Product counter: Number of prepared speciality coffees, speciality coffees with milk and hot water

U Maintenance counter: Number of maintenance programmes performed (cleaning, descaling etc.)

U Version: Software version

Example: Proceed as follows to view the number of speciality cof- fees prepared. Precondition: Please select product is displayed.   O  T  Press the P button.

Maintenance status (1/7)   g  T  Turn the Rotary Switch until Information (7/7) is displayed.

T  Press the Product counter button. Product counter

E Press the  >  button (bottom right) to display the number of additional speciality coffees.

  O  T  Press the P button to exit programming mode. Please select product

Querying information

33

5 Maintenance

5 Maintenance

Your F9 has the following integrated maintenance programmes:

U Rinsing the machine (Rinse the coffee system)

U Rinsing the milk system in the dual spout (Rinse the milk system)

U Cleaning the milk system in the dual spout (Cappuccino cleaning)

U Changing the filter (Change the filter) (only if filter is acti- vated)

U Cleaning the machine (Clean)

U Descaling the machine (Descale) (only if filter is not acti- vated)

E Clean or descale the machine, rinse the milk system or change the filter when you are prompted to do so.

E Press the P button to view a list of the maintenance pro- grammes (Maintenance status). By referring to the bar you can see which maintenance programme is due. When the bar is completely filled with red, your F9 will prompt you to per- form the appropriate maintenance programme.

E In the interests of hygiene, you should clean the milk system daily when you have been preparing milk.

You can initiate the rinse operation manually at any time.

Precondition: Please select product is displayed. T  Place a receptacle under the dual spout.

  O  T  Press the P button. Maintenance status (1/7)

  g  T  Turn the Rotary Switch until Maintenance status (2/7) is displayed.

T  Press the Rinse the coffee system button to initiate the rinse operation. Machine is rinsing, water flows out of the dual spout. The rinse stops automatically. Please select product appears on the display.

Rinsing the machine

34

5 Maintenance

After each milk preparation, the F9 prompts you to perform a milk system rinsing.

Precondition: Rinse the milk system is displayed. T  Place a receptacle under the dual spout.

  k  T  Press the Rotary Switch. Milk system is being rinsed, water flows out of the dual spout. The rinse stops automatically. Your F9 is once more ready for use.

To ensure that the milk system in the dual spout always works prop- erly, you must clean it daily when you have been preparing milk.

If the wrong cleaning agent is used, the machine could be damaged and/or traces could be left behind in the water.

T  Use only original JURA maintenance products.

E JURA milk system cleaner is available from specialised dealers.

Precondition: Please select product is displayed.   O  T  Press the P button.

Maintenance status (1/7) T  Press the Cappuccino cleaning button. T  Press the Start button. T  Press the Start button again.

Cleaner for Cappuccino T  Remove the milk pipe from the milk container or carton. T  Pour 250 ml of fresh water into a receptacle and add one

capful of milk system cleaner. T  Immerse the milk pipe in the receptacle. T  Place another receptacle under the dual spout. T  Press the Next button.

Cleaning Cappuccino, the dual spout and the pipe are cleaned. Water for Cappuccino

T  Rinse the receptacle thoroughly, fill it with 250 ml of fresh water and immerse the milk pipe in the water.

Rinsing the milk system

Cleaning the milk system

CAUTION

35

5 Maintenance

T  Empty the other receptacle and place it under the dual spout again.

T  Press the Next button. Cleaning Cappuccino, the dual spout and the pipe are rinsed with fresh water. The operation stops automatically. Milk system cleaning complete appears briefly on the display. Your F9 is once more ready for use.

The dual spout must be dismantled and rinsed daily if milk has been prepared to make sure it functions perfectly and also in the interests of hygiene.

T  Remove the milk pipe and rinse it thoroughly under running water.

T  Press the releasing devices and pull the dual spout down and off.

T  Press the milk system down and take it out.

Dismantling and rinsing the dual spout

36

5 Maintenance

T  Dismantle the milk system into its individual parts. T  Rinse all the parts under running water. If there are severely

dried-on milk residues, firstly immerse the individual parts in a solution of 250 ml cold water and 1 capful of JURA milk system cleaner. Then rinse the parts thoroughly.

T  Fit the air intake pipe.

T  Reassemble the milk system. When doing this, note the numbering of the individual parts.

T  Fit the assembled individual parts back in the dual spout and press it firmly.

T  Fit the dual spout on the machine. It will click into place audi- bly.

Your F9 no longer has to be descaled if you are using the CLARIS Blue filter cartridge. If you did not activate the filter cartridge the first time you used the machine, you can do this now as follows.

E Perform the inserting the filter operation without any inter- ruptions. This will ensure that your F9 always produces its best.

Precondition: Please select product is displayed.   O  T  Press the P button.

Maintenance status (1/7)

1

2

3

Inserting and activating the filter

37

5 Maintenance

  g  T  Turn the Rotary Switch until Maintenance settings (6/7) is displayed.

T  Press the Use filter button. Use filter

T  Press the Active button. T  Press the Save button.

Saved appears briefly on the display. Insert filter

T  Remove and empty the water tank. T  Open the filter holder and insert the filter cartridge into the

water tank, exerting slight pressure. T  Close the filter holder. It will click into place audibly.

E After two months, the filter will cease to work. Set the date on the date plate on the filter holder in the water tank.

T  Fill the water tank with fresh, cold water and reinsert the tank.

T  Press the Next button. Switch open

T  Place a receptacle under the hot-water spout.   l  T  Turn the switch to the m position.

Filter is being  rinsed, water flows out of the hot-water spout.

E You can interrupt rinsing of the filter at any time. To do this, turn the switch clockwise. Turn the switch anticlockwise to continue rinsing the filter.

E The water may be slightly discoloured. This is not harmful to health and does not affect the taste.

Rinsing of the filter stops automatically after approximately 300 ml. Switch close appears on the display.

  y  T  Turn the switch to the  position. Please select product appears on the display. The filter is now activated.

E After 50 litres of water have flowed through, the filter will cease to work. Your F9 will automatically prompt you to change the filter.

Changing the filter

38

5 Maintenance

E After two months, the filter will cease to work. Set the date on the date plate on the filter holder in the water tank.

E If the CLARIS Blue filter cartridge is not activated in program- ming mode, you will not be prompted to change the filter.

E CLARIS filter cartridges are available from specialised dealers.

Precondition: Change the filter is displayed.   O  T  Press the P button.

Maintenance status (1/7) T  Press the Change the filter button.

Change the filter T  Press the Start button. T  Press the Start button again.

Change filter T  Remove and empty the water tank. T  Open the filter holder and remove the old CLARIS Blue filter

cartridge. T  Insert a new CLARIS filter cartridge Blue into the water tank,

exerting slight pressure. T  Close the filter holder. It will click into place audibly. T  Fill the water tank with fresh, cold water and reinsert the

tank.

T  Place a receptacle under the hot-water spout. T  Press the Next button.

Switch open   l  T  Turn the switch to the m position.

Filter is being  rinsed, water flows out of the hot-water spout.

E You can interrupt rinsing of the filter at any time. To do this, turn the switch clockwise. Turn the switch anticlockwise to continue rinsing the filter.

E The water may be slightly discoloured. This is not harmful to health and does not affect the taste.

Rinsing of the filter stops automatically after approximately 300 ml. Switch close appears on the display.

  y  T  Turn the switch to the  position. Please select product appears on the display.

39

5 Maintenance

After 200 preparations or 80 switch-on rinses, the F9 will prompt you to clean it.

If the wrong cleaning agent is used, the machine could be damaged and/or traces could be left behind in the water.

T  Use only original JURA maintenance products.

E The cleaning programme lasts approximately 20 minutes. E Do not interrupt the cleaning programme. The quality of

cleaning will be impaired if you do so. E JURA cleaning tablets are available from specialised dealers.

Precondition: Clean machine is displayed.   O  T  Press the P button.

Maintenance status (1/7) T  Press the Clean button.

Clean T  Press the Start button. T  Press the Start button again.

Empty grounds T  Empty the drip tray and coffee grounds container and put

them back into the machine. Press the Rotary Switch

T  Place a receptacle under the dual spout.   k  T  Press the Rotary Switch.

Machine is being cleaned, water flows out of the dual spout. The operation is interrupted, Add cleaning tablet.

T  Open the cover of the filler funnel for ground coffee.

T  Insert a JURA cleaning tablet into the filler funnel. T  Close the cover of the filler funnel.

Press the Rotary Switch   k  T  Press the Rotary Switch.

Machine is being cleaned, water flows out of the dual spout repeatedly. The operation stops automatically. Empty grounds

Cleaning the machine

CAUTION

40

5 Maintenance

T  Empty the drip tray and coffee grounds container and put them back into the machine. Please select product appears on the display. Cleaning is now complete.

The F9 builds up deposits of limescale over time and automatically prompts you to descale it when necessary. The degree of calcifica- tion depends on the hardness of your water.

E If you use a CLARIS Blue filter cartridge and this is activated, you will not be prompted to descale.

If the descaling agent comes into contact with the skin or eyes, this can cause irritation.

T  Avoid contact with the skin or eyes. T  Rinse off the descaling agent with clean water. Should you get

any descaling agent in your eye, see a doctor.

If the wrong descaling agent is used, the machine could be dam- aged and/or traces could be left behind in the water.

T  Use only original JURA maintenance products.

If the descaling operation is interrupted, there may be damage to the machine.

T  Allow the descaling programme to run to the end.

If the descaling agent comes into contact with sensitive surfaces (e.g. marble), damage cannot be ruled out.

T  Clean up any splashes immediately.

E The descaling programme lasts approximately 40 minutes. E JURA descaling tablets are available from specialised dealers.

Precondition: Decalcify machine is displayed.   O  T  Press the P button.

Maintenance status (1/7) T  Press the Descale button.

Descale T  Press the Start button. T  Press the Start button again.

Empty drip tray

Descaling the machine

J CAUTION

CAUTION

CAUTION

CAUTION

41

5 Maintenance

T  Empty the drip tray and coffee grounds container and put them back into the machine. Agent in tank

T  Remove and empty the water tank. T  Completely dissolve the contents of one blister (3 JURA des-

caling tablets) in a receptacle holding 500 ml of lukewarm water. This may take several minutes.

T  Pour the solution into the empty water tank and insert it into the machine. Switch open

T  Place a receptacle under the hot-water spout and dual spout.   l  T  Turn the switch to the m position.

Machine is being descaled, water flows out of the hot-water spout repeatedly. The operation is interrupted, Switch close.

  y  T  Turn the switch to the  position. Machine is being descaled, the descaling operation is con- tinued. Water flows out of the dual spout repeatedly. The operation is interrupted, Empty drip tray.

T  Empty the drip tray and coffee grounds container and put them back into the machine. Fill water tank.

T  Empty the receptacle and place it under the hot water and dual spouts.

T  Remove the water tank and rinse it thoroughly. T  Fill the water tank with fresh, cold water and reinsert the

tank. Switch open

  l  T  Turn the switch to the m position. Machine is being descaled, the descaling operation is con- tinued. The operation is interrupted, Switch close.

  y  T  Turn the switch to the  position. Machine is being descaled, the descaling operation is con- tinued. The operation is interrupted, Machine is being descaled. Water flows out of the dual spout. Empty drip tray

42

5 Maintenance

T  Empty the drip tray and coffee grounds container and put them back into the machine. Please select product appears on the display. Descaling is now complete.

E If the descaling operation stops unexpectedly, rinse the water tank thoroughly.

Limescale deposits may form in the water tank. To ensure correct function of the machine, descale the water tank from time to time.

T  Remove the water tank. T  If you use a CLARIS Blue filter cartridge, remove this. T  Completely fill the water tank and dissolve 3 JURA descaling

tablets in it. T  Leave the water tank with the descaling solution for several

hours (e.g. overnight). T  Empty the water tank and rinse it thoroughly. T  If you use a CLARIS Blue filter cartridge, insert this again. T  Fill the water tank with fresh, cold water and reinsert the

tank.

Coffee beans may be covered with a slight oil film which remains on the walls of the bean container. These traces may negatively affect the coffee result. For this reason clean the bean container from time to time.

Precondition: Fill bean container is displayed.   Q  T  Switch the machine off with the On/Off button.   3  T  Switch the machine off at the power switch.

T  Remove the aroma preservation cover. T  Clean the bean container with a soft, dry cloth. T  Fill the bean container with coffee beans and close the

aroma preservation cover.

Descaling the water tank

Cleaning the bean container

43

6 Display messages

6 Display messages

Message Cause/Result Action Fill water tank. The water tank is empty. You

cannot prepare any products. T Fill the water tank (see Chapter 1 Preparing and using for the first time Filling the water tank).

Empty grounds The coffee grounds container is full. You cannot prepare any products.

T Empty the coffee grounds container and the drip tray (see Chapter 3 Daily operation Daily maintenance).

Drip tray not fitted

The drip tray is not inserted correctly or is not inserted at all. You cannot prepare any products.

T Fit the drip tray.

Fill bean container

The bean container is empty. You cannot prepare any products.

T Fill the bean container (see Chapter 1 Preparing and using for the first time Filling the bean container).

Rinse the milk system

The F9 requests a milk system rinsing.

T Perform milk system rinsing (see Chapter 5 Maintenance Rinsing the milk system).

Change the filter The filter cartridge no longer works.

T Replace the CLARIS Blue filter cartridge (see Chapter 5 Maintenance Changing the filter).

Clean machine The F9 is prompting you to clean it.

T Perform cleaning (see Chapter 5 Maintenance Cleaning the machine).

Decalcify machine

The F9 is prompting you to descale it.

T Perform descaling (see Chapter 5 Maintenance Descaling the machine ).

Not enough ground coffee

There is insufficient ground coffee in the machine; the F9 stops the operation.

T The next time you prepare a beverage, add more ground coffee (see Chapter 2 Preparation Ground coffee).

Too hot The system is too hot to start a maintenance programme.

T Wait for several minutes until the system has cooled or prepare a special- ity coffee or hot water.

44

7 Troubleshooting

7 Troubleshooting

Problem Cause/Result Action Insufficient foam is produced when the milk is frothed, or milk sprays from the dual spout.

The dual spout is dirty. T Clean the milk system in the dual spout (see Chapter 5 Maintenance Cleaning the milk system). T Dismantle and rinse the dual spout (see Chapter 5 Maintenance Dismantling and rinsing the dual spout).

Coffee only comes out in drips when it is being prepared.

Coffee or ground coffee has been ground too finely and is blocking the system. The same filter cartridge may have been used several times or the water hardness set incorrectly in the programming mode.

T Put the grinder on a coarser setting or use coarser ground coffee (see Chapter 2 Preparation Adjusting the grinder). T Perform descaling (see Chapter 5 Maintenance Descaling the machine ).

Water hardness cannot be adjusted.

The CLARIS Blue filter cartridge is activated.

T Deactivate the filter cartridge in programming mode.

Fill water tank. is displayed although the water tank is full.

The water tank float is trapped.

T Descale the water tank (see Chapter 5 Maintenance Descaling the water tank).

Grinder is making a very loud noise.

There are foreign objects in the grinder.

T Contact customer support in your country (see Chapter 11 JURA contact details / Legal information).

Error 2 or Error 5 is displayed.

If the machine was exposed to the cold for a long period of time, heating is disabled for safety reasons.

T Warm the machine at room tempera- ture.

Other Error messages are displayed.

T Switch the F9 off at the power switch. Contact customer support in your country (see Chapter 11 JURA contact details / Legal information).

E If you were unable to solve the problem, contact customer support in your country (see Chapter 11 JURA contact details / Legal information).

45

8 Transport and environmentally friendly disposal

8 Transport and environmentally friendly disposal

Keep the packaging for your F9. It should be used to protect the machine during transport.

In order to protect the F9 from frost during transport, the system must be emptied.

Precondition: Please select product is displayed. T  Remove the milk pipe from the dual spout. T  Place a receptacle under the hot-water spout.

  g  T  Turn the Rotary Switch to view the product selector.   g  T  Turn the Rotary Switch until the Portion milk foam product

is in focus.   k  T  Press the Rotary Switch.

Portion milk foam, hot steam is discharged from the dual spout.

T  Remove and empty the water tank. T  Turn the Rotary Switch until Amount of milk 60 sec. is dis-

played. Steam will continue to be discharged from the dual spout until the system is empty. Fill water tank.

  Q  T  Press the On/Off button. Your F9 is switched off.

Please dispose of old machines in an environmentally neutral way. H Old machines contain valuable, recyclable materials which should be recycled. Please therefore dispose of old machines via suitable collection systems.

Transport / Emptying the system

Disposal

46

9 Technical data

9 Technical data

Voltage 220240 V ~, 50 Hz Power 1450 W Conformity mark A

Energy consumption Save energy / Active

approx. 5 Wh

Energy consumption Save energy / Inactive

approx. 16 Wh

Pump pressure static, max. 15 bar Holding capacity of water tank 1.9 l Holding capacity of bean container 310 g Holding capacity of coffee grounds container

max. 15 portions

Cable length approx. 1.1 m Weight approx. 9.8 kg Dimensions (W  H  D) 28.5 35.5 44.5 cm

Information for testers (repeat test in accordance with DIN VDE 0701-0702): The central grounding point (CGP) is located on the underside of the machine, right next to the mains cable's connec- tion point.

47

10 Index

10 Index

A Addresses 52 Adjusting the product settings 24 Aroma preservation cover

Bean container with aroma preservation cover 4

Automatic switch-off 27

B Bean container

Bean container with aroma preservation cover 4 Cleaning 42 Filling 10

Bus bar Technical data 46

Button On/Off button 5 P button (programming) 5

C Caff latte 17 Cappuccino 17 Cappuccino frother cleaning

Cleaning the milk system 34 Cappuccino frother rinsing

Rinsing the milk system 34 Central grounding point 46 Changing a name 26 CLARIS Blue filter cartridge

Changing 37 Inserting and activating the filter 36

Classics 24 Cleaning

Bean container 42 Machine 39

Coffee 16 2 coffees 16

Coffee grounds container 4 Consistency of grind

Adjusting the grinder 20 Grinder adjustment switch 4

Contact details 52

Cover Filler funnel for ground coffee 4 Storage compartment 4 Water tank 4

Cup grille 4 Customer support 52

D Descaling

Machine 40 Water tank 42

Display 5 Display messages 43 Display settings 30 Disposal 45 Double product 16 Drip tray 4 Dual spout

Dismantling and cleaning 35 Height-adjustable dual spout 4

E Emptying the system 45 Energy-saving mode 28 Errors

Troubleshooting 44 Espresso

2 espressi 16 Espresso 16 Espresso macchiato 17 Expert mode 24

F Factory settings

Restore factory settings 31 Filler funnel

Filler funnel for ground coffee 4 Filling

Bean container 10 Water tank 14

Filter Changing 37 Inserting and activating the filter 36

First-time use 10 With filter cartridge activation 11 Without filter cartridge activation 12

Flat white 17

48

10 Index

G Grinder adjustment switch 4 Ground coffee 18

Measuring spoon for ground coffee 4 Grounding point 46

H Hotline 52 Hot water 20 Hot water preparation

Switch for hot water preparation 5 Hot-water spout 4

I Instant coffee

Ground coffee 18 Internet 10

J JURA

Contact details 52 Internet 10

L Language 31 latte macchiato 17

M Machine

Cleaning 39 Descaling 40 Regular maintenance 22 Rinsing 33 Setting up 10 Switching off 22 Switching on 21

Mains cable 4 Maintenance 33

Daily maintenance 21 Regular maintenance 22

Maintenance settings 28 Measuring spoon for ground coffee 4 Messages, display 43 Milk

Connecting milk 14 Milk system

Cleaning 34 Rinsing 34

P Permanently setting the water for the cup

size 19 Permanent settings in programming mode

23 Power switch 4 Preparation 15, 17

2 coffees 16 2 espressi 16 2 ristretti 16 At the touch of a button 15 Caff latte 17 Cappuccino 17 Coffee 16 Espresso 16 Espresso macchiato 17 Flat white 17 Ground coffee 18 Hot water 20 Latte macchiato 17 Ristretto 16 Two speciality coffees 16 Using the product selector 15

Preparation options 15 Problems

Troubleshooting 44 Product selector view 15 Product settings 24

Adjusting 24 Programming mode 23

Automatic switch-off 27 Display settings 30 Energy-saving mode 28 Language 31 Maintenance settings 28 Product settings 24 Querying information 32 Renaming a product 26 Replacing products on the start screen 25 Restore factory settings 31 Setting the water hardness 29 Unit for amount of water 30

Proper use 6

Q Querying information 32

49

10 Index

R Regular maintenance 22 Renaming a product 26 Rinsing

Machine 33 Ristretto 16

2 ristretti 16 Rotary Selection 15 Rotary Switch 5

S Safety 6 Safety information 6 Settings

Maintenance settings 28 Permanent settings in programming mode 23

Setting up Setting up the machine 10

Short operating instructions 10 Spout

Height-adjustable dual spout 4 Hot-water spout 4

Switch for hot water preparation 5 Switching off 22 Switching on 21 Switch-off

Automatic switch-off 27 Symbol description 3

T Technical data 46 Tel 52 Transport 45 Troubleshooting 44 Two products 16

U Unit for amount of water 30 Use, First-time 10

W Water hardness

Determining the water hardness 13 Setting the water hardness 29

Water tank 4 Descaling 42 Filling 14

Website 10

50

51

52

11 JURA contact details / Legal information

11 JURA contact details / Legal information

JURA Elektroapparate AG Kaffeeweltstrasse 10 CH-4626 Niederbuchsiten Tel. +41 (0)62 38 98 233

@ You will find additional contact details for your country at www.jura.com.

The machine complies with the following directives:

U 2014/35/EU  Low Voltage Directive

U 2014/30/EU  Electromagnetic Compatibility

U 2009/125/EC  Ecodesign Directive

U 2011/65/EU  RoHS Directive

We reserve the right to make technical changes. The diagrams used in these instructions for use are for illustration purposes only and do not represent the original colours of t