Hyundai Santa Fe Calligraphy 19 2021 SUV Owner's Manual PDF
Summary of Content for Hyundai Santa Fe Calligraphy 19 2021 SUV Owner's Manual PDF
Santa Fe
20 21 O
w ners M
a nua
l
2021 Owners ManualMS2O-EU0NA
S a
n ta
Fe M
S 2U
0
WARRANTIES FOR YOUR HYUNDAI VEHICLE
Please consult your Owner's Handbook & Warranty Information booklet for your vehicle's specific warranty coverage.
RESPONSIBILITY FOR MAINTENANCE
The maintenance requirements for your new HYUNDAI are found in Section 9. As the owner, it is your responsibility to see that all maintenance operations specified by the manufacturer are carried out at the appropriate intervals. When the vehicle is used in severe driving conditions, more frequent maintenance is required for some operations. Maintenance requirements for severe operating conditions are also included in Section 9.
WARNING California Proposition 65
Operating, servicing and maintaining a passenger vehicle or off- road vehicle can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle in a well-ventilated area and wear gloves or wash your hands frequently when servicing your vehicle. For more information go to www.P65Warnings. ca.gov/passenger-vehicle.
This Owners Manual should be considered a part of the car and remain with it when it is sold for the use of the next owner.
OWNERS INFORMATION
ORIGINAL OWNER
ADDRESS
CITY STATE ZIP CODE
DELIVERY DATE
(Date Sold to Original Retail Purchaser)
DEALER NAME DEALER NO.
ADDRESS
CITY STATE ZIP CODE
All information in this Owners Manual is current at the time of publication. However, HYUNDAI reserves the right to make changes at any time so that our policy of continual product improvement may be carried out.
This manual applies to all models of this vehicle and includes descriptions and explanations of optional as well as standard equipment. As a result, you may find material in this manual that does not apply to your specific vehicle.
OWNERS MANUAL Operation Maintenance Specifications
Introduction 1
Introduction
F2
Your HYUNDAI should not be modified in any way. Such modifications may adversely affect the performance, safety or durability of your HYUNDAI and may, in addition, violate conditions of the limited warranties covering the vehicle. Certain modifications may also be in violation of regulations established by the U.S. Department of Transportation and other federal or state agencies.
CAUTION: MODIFICATIONS TO YOUR HYUNDAI
Your vehicle is equipped with electronic fuel injection and other electronic components. It is possible for an improperly installed/adjusted two-way radio or cellular telephone to adversely affect electronic systems. For this reason, we recommend that you carefully follow the radio manufacturers instructions or consult your authorized HYUNDAI dealer for precautionary measures or special instructions if you choose to install one of these devices.
TWO-WAY RADIO OR CELLULAR TELEPHONE INSTALLATION
F3
This manual includes information titled as DANGER, WARNING, CAUTION and NOTICE. These titles indicate the following:
DANGER DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury.
WARNING WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION CAUTION indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
NOTICE NOTICE indicates a situation which, if not avoided, could result in vehicle damage.
SAFETY AND VEHICLE DAMAGE WARNING
Your Hyundai vehicle may be equipped with technologies and services that use information collected, generated, recorded or stored by the vehicle. Hyundai has created a Vehicle Owner Privacy Policy to explain how these technologies and services collect use and share this information.
You may read our Vehicle Owner Privacy Policy on the Hyundaiusa.com website at: https://www.hyundaiusa.com/owner-privacy-policy.aspx If you would like to receive a hard copy of our Vehicle Owner Privacy Policy, please contact our Customer Care Center at:
Hyundai Customer Care P.O. Box 20850 Fountain Valley, CA 92728 800-633-5151 consumeraffairs@hmausa.com
Hyundais Customer Care Center representatives are available Monday through Friday, between the hours of 6:00 AM and 5:00 PM PST and Saturday between 6:30 AM and 3:00 PM PST (English). For Customer Connect Care assistance in Spanish or Korean, representatives are available Monday through Friday between 6:30 AM and 3:00 PM PST.
HYUNDAI VEHICLE OWNER PRIVACY POLICY
1
2
3
4
5
6
7
9
I
8
Maintenance
Index
Emergency situations
Driver assistance system
Driving your vehicle
Convenient features
Instrument cluster
Seats & Safety System
Vehicle Information, Consumer Information and Reporting Safety Defects
Foreword
Table of contents
Introduction
1-2
FOREWORD Congratulations, and thank you for choosing HYUNDAI. We are pleased to welcome you to the growing number of discerning people who drive HYUNDAI. We are very proud of the advanced engineering and high-quality construction of each HYUNDAI we build. Your Owners Manual will introduce you to the features and operation of your new HYUNDAI. To become familiar with your new HYUNDAI, so that you can fully enjoy it, read this Owners Manual carefully before driving your new vehicle. This manual contains important safety information and instructions intended to familiarize you with your vehicles controls and safety features so you can safely operate your vehicle. This manual also contains information on maintenance designed to enhance safe operation of the vehicle. It is recommended that all service and maintenance on your car be performed by an authorized HYUNDAI dealer. An authorized HYUNDAI dealer are prepared to provide high-quality service, maintenance and any other assistance that may be required. This Owners Manual should be considered a permanent part of your vehicle, and should be kept in the vehicle so you can refer to it at any time. The manual should stay with the vehicle if you sell it to provide the next owner with important operating, safety and maintenance information.
HYUNDAI MOTOR AMERICA
CAUTION Severe engine and transmission damage may result from the use of poor quality fuels and lubricants that do not meet HYUNDAI specifications. You must always use high quality fuels and lubricants that meet the specifications listed on Page 2-14 in the Vehicle Specifications section of the Owners Manual.
Copyright 2020 HYUNDAI Motor America. All rights reserved. No part of this publication may be reproduced, stored in any retrieval system or transmitted in any form or by any means without the prior written permission of HYUNDAI Motor America.
01
1-3
GUIDE TO HYUNDAI GENUINE PARTS 1. What are HYUNDAI Genuine Parts?
HYUNDAI Genuine Parts are the same parts used by HYUNDAI Motor Company to manufacture vehicles. They are designed and tested for the optimum safety, performance, and reliability for our customers.
2. Why Hyundai Genuine Parts? HYUNDAI Genuine Parts are engineered and built to meet rigid manufacturing requirements. Damage caused by using imitation, counterfeit or used salvage parts is not covered under the HYUNDAI New Vehicle Limited Warranty or any other HYUNDAI warranty. In addition, any damage to or failure of HYUNDAI Genuine Parts caused by the installation or failure of an imitation, counterfeit or used salvage part is not covered by any HYUNDAI Warranty.
3. How can you tell if you are purchasing HYUNDAI Genuine Parts? Look for the HYUNDAI Genuine Parts Logo on the package (see below). HYUNDAI Genuine Parts exported to the U.S. are packaged with labels written only in English. HYUNDAI Genuine Parts are only sold through authorized HYUNDAI Dealerships.
Introduction
1-4
We want to help you get the greatest possible driving pleasure from your vehicle. Your Owners Manual can assist you in many ways. To gain an overview of the contents of your Owners Manual, use the Table of Contents in the front of the manual. The first page of each Chapter includes a detailed Table of Contents of the topics in that Chapter. To quickly locate information about your vehicle, use the Index in the back of the manual. It is an alphabetical list of what is in this manual and the page number where it can be found. For your convenience, we have incorporated tabs on the right-hand page edges. These tabs are coded with the Chapter titles to assist you with navigating through the manual.
SAFETY MESSAGES Your safety, and the safety of others, is very important. This Owners Manual provides you with many safety precautions and operating procedures. This information alerts you to potential hazards that may hurt you or others, as well as damage to your vehicle. Safety messages found on vehicle labels and in this manual describe these hazards and what to do to avoid or reduce the risks. Warnings and instructions contained in this manual are for your safety. Failure to follow safety warnings and instructions can lead to serious injury or death. Throughout this manual DANGER, WARNING, CAUTION, NOTICE and the SAFETY ALERT SYMBOL will be used.
This is the safety alert symbol. It is used to alert you to potential physical injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. The safety alert symbol precedes the signal words DANGER, WARNING and CAUTION.
DANGER DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury.
WARNING WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION CAUTION indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
NOTICE NOTICE indicates a situation which, if not avoided, could result in vehicle damage.
HOW TO USE THIS MANUAL
01
1-5
Gasoline engine Unleaded Your new vehicle is designed to use only unleaded fuel having an octane number ((R+M)/2) of 87 (Research Octane Number 91) or higher. (Do not use methanol blended fuels) Your new vehicle is designed to obtain maximum performance with UNLEADED FUEL, as well as minimize exhaust emissions and spark plug fouling.
NOTICE To prevent damage to the engine and engine components, never add any fuel system cleaning agents to the fuel tank other than what has been specified. Consult an authorized HYUNDAI dealer for additional information.
WARNING Do not top off after the nozzle automatically shuts off when refueling. Always check that the fuel cap is installed securely to prevent fuel spillage in the
event of an accident.
Gasoline containing alcohol and methanol Gasohol, a mixture of gasoline and ethanol (also known as grain alcohol) are being marketed along with or instead of leaded or unleaded gasoline. For example, E15 is a gasohol comprised of 15% ethanol and 85% gasoline. Do not use gasohol containing more than 15% ethanol, and do not use gasoline or gasohol containing any methanol. Either of these fuels may cause drivability problems and damage to the fuel system, engine control system and emission control system. Discontinue using gasohol of any kind if drivability problems occur. E85 fuel is an alternative fuel comprised of 85 percent ethanol and 15 percent gasoline, and is manufactured exclusively for use in Flexible Fuel Vehicles. E85 is not compatible with your vehicle. Use of E85 may result in poor engine performance and damage to your vehicles engine and fuel system. HYUNDAI recommends that customers do not use fuel with an ethanol content exceeding 15 percent.
NOTICE To prevent damage to your vehicles engine and fuel system: Never use gasohol which contains methanol. Never use gasohol containing more than 15% ethanol. Never use leaded fuel or leaded gasohol. Never use E85 fuel. Your New Vehicle Limited Warranty does not cover damage to the fuel system or any performance problems caused by the use of E85 fuel.
FUEL REQUIREMENTS
Introduction
1-6
Using Fuel Additives (except Detergent Fuel Additives) Using fuel additives such as: - Silicone fuel additive - Ferrocene (iron-based) fuel additive - Other metallic-based fuel additives
May result in cylinder misfire, poor acceleration, engine stalling, damage to the catalyst, or abnormal corrosion, and may cause damage to the engine resulting in a reduction in the overall life of the powertrain. - The Malfunction Indicator Lamp (MIL) may illuminate.
NOTICE Damage to the fuel system or performance problem caused by the use of these fuels may not be covered by your New Vehicle Limited Warranty.
Gasoline containing MMT Some gasoline contains harmful manganese-based fuel additives such as MMT (Methylcyclopentadienyl Manganese Tricarbonyl). HYUNDAI does not recommend the use of gasoline containing MMT. This type of fuel can reduce vehicle performance and affect your emission control system. The malfunction indicator lamp on the cluster may come on.
Detergent Fuel Additives HYUNDAI recommends that you use good quality gasolines treated with detergent additives such as TOP TIER Detergent Gasoline, which help prevent deposit formation in the engine. These gasolines will help the engine run cleaner and enhance performance of the Emission Control System. For more information on TOP TIER Detergent Gasoline, please go to the website (www. toptiergas.com). For customers who do not use TOP Tier Detergent Gasoline regularly, and have problems starting or the engine does not run smoothly, detergent-based fuel additives that you can purchase separately may be added to the gasoline. If TOP TIER Detergent Gasoline is not available, one bottle of additive added to the fuel tank according to the maintenance schedule is recommended (refer to the Maintenance Schedule in chapter 9). Additives are available from your authorized HYUNDAI dealer along with information on how to use them. Do not mix other additives.
Operation in foreign countries If you are going to drive your vehicle in another country, be sure to: Observe all regulations regarding registration and insurance. Determine that acceptable fuel is available.
01
1-7
VEHICLE MODIFICATIONS This vehicle should not be modified. Modification of your vehicle could affect its
performance, safety or durability and may even violate governmental safety and emissions regulations. In addition, damage or performance problems resulting from any modification may not be covered under warranty.
If you use unauthorized electronic devices, it may cause the vehicle to operate abnormally, wire damage, battery discharge and fire. For your safety, we recommend that you do not use unauthorized electronic devices.
VEhICLE bREAk-In pROCEss By following a few simple precautions for the first 600 miles (1,000km) you may add to the performance, economy and life of your vehicle. Do not race the engine. While driving, keep your engine speed (rpm, or revolutions per minute) between
2,000 rpm and 4,000 rpm. Do not maintain a single speed for long periods of time, either fast or slow. Varying
engine speed is needed to properly break-in the engine. Avoid hard stops, except in emergencies, to allow the brakes to seat properly. Do not tow a trailer during the first 1,200 miles (2,000km) of operation.
WARNING CALIFORNIA PROPOSITION 65 WARNING Items contained in motor vehicles or emitted from them are known to the State of California to cause cancer and birth defects or reproductive harm. These include: Gasoline and its vapors Engine exhaust Used engine oil Interior passenger compartment components and materials Component parts which are subject to heat and wear In addition, battery posts, terminals and related accessories contain lead, lead compounds and other chemicals known to the State of California to cause cancer and reproductive harm. For more information go to https://www.p65warnings.ca.gov/passenger-vehicle
Introduction
1-8
VEHICLE DATA COLLECTION AND EVENT DATA RECORDERS This vehicle is equipped with an event data recorder (EDR). The main purpose of an EDR is to record, in certain crash or near crash-like situations, such as an air bag deployment or hitting a road obstacle, data that will assist in understanding how a vehicles systems performed. The EDR is designed to record data related to vehicle dynamics and safety systems for a short period of time, typically 30 seconds or less. The EDR in this vehicle is designed to record such data as: How various systems in your vehicle were operating; Whether or not the driver and passenger safety belts were buckled/fastened; How far (if at all) the driver was depressing the accelerator and/or brake pedal; and, How fast the vehicle was traveling. These data can help provide a better understanding of the circumstances in which crashes and injuries occur. NOTE: EDR data are recorded by your vehicle only if a non-trivial crash situation occurs; no data are recorded by the EDR under normal driving conditions and no personal data (e.g., name, gender, age, and crash location) are recorded. However, other parties, such as law enforcement, could combine the EDR data with the type of personally identifying data routinely acquired during a crash investigation. To read data recorded by an EDR, special equipment is required, and access to the vehicle or the EDR is needed. In addition to the vehicle manufacturer, other parties, such as law enforcement, that have the special equipment, can read the information if they have access to the vehicle or the EDR.
2
2. Vehicle Information, Consumer Information and Reporting Safety Defects
Exterior overview (I) ...........................................................................................2-2 Exterior overview (II) ..........................................................................................2-3 Interior overview .............................................................................................. 2-4 Instrument panel overview (I) .......................................................................... 2-5 Instrument panel overview (II) ......................................................................... 2-6 Engine compartment .........................................................................................2-7 Dimensions ........................................................................................................ 2-8 Engine ................................................................................................................ 2-8 Bulb wattage ..................................................................................................... 2-9 Tires and wheels ..............................................................................................2-10 Air conditioning system ....................................................................................2-11 Volume and weight ...........................................................................................2-11 Recommended lubricants and capacities ..................................................... 2-12
Recommended SAE viscosity number ......................................................................2-14
Vehicle Identification Number (VIN) .............................................................. 2-15 Vehicle certification label ................................................................................ 2-15 Tire specification and pressure label .............................................................. 2-15 Engine number ................................................................................................. 2-16 Refrigerant label .............................................................................................. 2-16 Consumer Information .................................................................................... 2-17 Reporting Safety Defects ................................................................................2-18
Vehicle Information, Consumer Information and Reporting Safety Defects
2-2
Vehicle Information, Consumer Information and Reporting Safety Defects
ExTERIOR OVERVIEW (I) Front view
The actual shape may differ from the illustration.
OTM010001
1. Hood ...................................................... 5-67
2. Headlamp .....................................5-82, 9-52
3. Tires and wheels ................................... 9-32
4. Side view mirror .................................... 5-55
5. Sunroof .................................................. 5-62
6. Front windshield wiper blades .. 5-95, 9-26
7. Windows ............................................... 5-58
8. Front ultrasonic sensors ........................7-111
2-3
02
Rear view
The actual shape may differ from the illustration.
OTM010002
ExTERIOR OVERVIEW (II)
9. Door Handle ...........................................5-32
10. Fuel filler door ........................................5-77
11. Rear combination lamp........................9-54
12. Liftgate ..................................................5-68
13. High mounted stop lamp ..................... 9-57
14. Rear window wiper blades .........5-96, 9-27
15. Rear ultrasonic sensors .......................7-108
16. Antenna ................................................ 5-137
17. Rear view camera ................................. 7-88
2-4
Vehicle Information, Consumer Information and Reporting Safety Defects
1. Inside door handle .................................5-32
2. Power window switches ...................... 5-58
3. Power window lock button / ...............5-60
Electronic child safety lock button ...... 5-36
4. Side view mirror folding button .................5-56
5. Side view mirror control switch .................5-56
6. Central door lock switch ...................... 5-33
7. Instrument panel illumination control switch ...................................................... 4-5
8. Lane Safety button ................................ 7-19
9. Power Liftgate open/close button ...... 5-70
10. ESC (Electronic Stability Control) OFF button ....................................................6-44
11. EPB (Electronic Parking Brake) switch .................................................... 6-35
12. Steering wheel ...................................... 5-42
13. Steering wheel tilt/telescopic switch.. 5-43
14. Fuse box ................................................ 9-42
15. Hood release lever ................................ 5-67
16. Seat .......................................................... 3-3
INTERIOR OVERVIEW
The actual shape may differ from the illustration. OTMA020001C
2-5
02
1. Instrument cluster .................................. 4-4
2. Drivers front air bag ............................. 3-47
3. Engine Start/Stop button .......................6-9
4. Infotainment system ........................... 5-137
5. Hazard warning lamp switch ................. 8-2
6. Climate control system ..............5-97, 5-105
7. Shift button .................................. 6-14, 6-23
8. ISG (Idle Stop and Go) button ..............6-62
9. Auto Hold button .................................. 6-39
10. Heated steering wheel button ............. 5-43
11. Drive mode button .....................6-66, 6-69
12. DBC (Downhill Brake Control) button ...6-48
13. Parking Safety button .................7-108, 7-111
14. Parking/View button ................... 7-89, 7-92
15. Air ventilation seat button ................... 3-20
16. Seat warmer ...........................................3-19
17. Passengers front air bag ..................... 3-47
18. Glove box ............................................. 5-122
19. Wireless charging system pad ............5-129
20. Cup holder ........................................... 5-124
21. AC inverter ........................................... 5-127
22. USB charger ......................................... 5-127
The actual shape may differ from the illustration. OTM010008L
InsTRUmEnT pAnEL OVERVIEW (I)
2-6
Vehicle Information, Consumer Information and Reporting Safety Defects
The actual shape may differ from the illustration.
OTM010005
1. Lighting control lever ........................... 5-82
2. Wiper and washer control lever........... 5-93
3. Voice recognition button ....................5-138
4. Bluetooth hands-free phone button ....5-139
5. LCD display control .............................. 4-29
6. Driving Assist button .............................7-54
7. Smart cruise control Vehicle Distance button .....................................................7-54
InsTRUmEnT pAnEL OVERVIEW (II)
2-7
02
Smartstream G2.5 GDI
Smartstream G2.5 T-GDI
The actual engine compartment in the vehicle may differ from the illustration.
OTMA090001/OTMA090015
1. Engine oil filler cap ................................ 9-17
2. Engine oil dipstick .................................9-16
3. Engine coolant reservoir .......................9-18
4. Windshield washer fluid reservoir ....... 9-22
5. Brake fluid reservoir .............................. 9-21
6. Battery terminal [+] .............................. 9-29
7. Battery terminal [-] ............................... 9-29
8. Air cleaner ............................................. 9-23
9. Fuse box ................................................9-43
ENGINE COMPARTMENT
Vehicle Information, Consumer Information and Reporting Safety Defects
2-8
Items in (mm) Overall length 188.4 (4,785) Overall width 74.8 (1,900)
Overall height 2WD 4WD
66.3 (1,685) / 67.3 (1,710)* 67.1 (1,705) / 68.1 (1,730)*
Tread Front Rear
18 / 19 : 64.80 (1,646) 18 / 19 : 65.19 (1,656) 20 : 64.44 (1,637) 20 : 64.84 (1,647)
Wheelbase 108.9 (2,765) * : if equipped with roof rack
ENGINE
Engine Displacement cu. in (cc)
Bore x Stroke in. (mm) Firing order No. of cylinders
Smartstream G 2.5 GDI 152.4 (2,497)
3.5 x 4 (88.5 x 101.5) 1-3-4-2 4, in-line
Smartstream G 2.5 T-GDI
DIMENSIONS
02
2-9
Light bulb Bulb type Wattage
Front
Type A
Headlamp High LED LED Low LED LED
Daytime running lamp (DRL) / position lamp LED LED
Turn signal lamp PY21W 21
Type B
Headlamp High LED LED Low LED LED
Low beam assist LED LED Daytime running lamp (DRL) / position lamp LED LED
Turn signal lamp (Outside mirror) LED LED Turn signal lamp (Outside mirror) LED LED
Rear
Type A Tail lamp W5W 5 Tail/Stop lamp P21/5W 5/21
Type B Tail lamp LED LED Tail/Stop lamp LED LED
Turn signal lamp Type A PY21W 21 Type B LED LED
Reverse lamp W16W 16 License plate lamp W5W 5 High mounted stop lamp LED LED
Interior
Map lamp Type A W10W 10 Type B LED LED
Room lamp FESTOON 10 Personnal lamp LED LED Glove box lamp W5W 5 Sunvisor lamp FESTOON 5 Luggage compartment lamp FESTOON 10
BULB WATTAGE
Vehicle Information, Consumer Information and Reporting Safety Defects
2-10
Items Tire size Wheel size
Inflation pressure kPa (psi)
Wheel bolt torque
lbfft (kgfm, Nm)
Normal load Maximum load Front Rear Front Rear
Full size tire 235/60 R18 7.5J x 18
240(35) 79~94
(11~13, 107~127)
235/55 R19 7.5J x 19 255/45 R20 8.5J x 20
Compact spare tire T135/90 D17 4.0B x 17 420(60)
NOTICE It is permissible to add 3 psi to the standard tire pressure specification if colder
temperatures are expected soon. Tires typically lose 1psi (7kPa) for every 12F temperature drop. If extreme temperature variations are expected, recheck your tire pressure as necessary to keep them properly inflated.
Tire inflation pressures will vary with changes in elevation. If driving in areas of higher or lower elevation, be sure to check and adjust for proper tire inflation.
CAUTION When replacing tires, use the same size originally supplied with the vehicle.
Using tires of a different size can damage the related parts or not work properly. When replacing tires, ALWAYS use the same size, type, construction and tread
pattern supplied with the vehicle for all tires.
TIRES AND WHEELS
02
2-11
Items Weight of volume Classification Refrigerant
oz. (g) R1234yf Front 22.05 (625) 0.88 (25) R-1234yf
Compressor lubricant
oz. (g)
Front 3.5 (100) 0.35 (10) PAG
Front + Rear 7.4 (210) 0.35 (10)
We recommend you to contact an authorized HYUNDAI dealer for more details.
VOLUME AND WEIGHT
Items Smartstream G2.5 GDi Smartstream G2.5 T-GDi
2WD 4WD 2WD 4WD Gross vehicle weight
lbs. (kg) 5,137
(2,330) 5,247
(2,380) 5,247
(2,380) 5,357
(2,430)
Luggage volume Items 5-Seater
SAE
cu.ft()
BEHIND 1ST ROW 72.1 (2,041) ~ *84.6 (2,396) (*Forward and upright seat position)
BEHIND 2ND ROW 36.4 (1,032) ~ *37.9 (1,075) (*upright seat position)
AIR CONDITIONING SYSTEM
Vehicle Information, Consumer Information and Reporting Safety Defects
2-12
RECOMMENDED LUBRICANTS AND CAPACITIES To help achieve proper engine and powertrain performance and durability, use only lubricants of the proper quality. The correct lubricants also help promote engine efficiency that results in improved fuel economy. These lubricants and fluids are recommended for use in your vehicle.
Lubricant Volume Classification
Engine oil *1 (drain and refill) Recommends
Smartstream G2.5 GDI
6.13 US qt. (5.8)
0W-20, API SN PLUS/SP or ILSAC GF-6 *2
Smartstream G2.5 T-GDI
Automatic transmission fluid
Smartstream G2.5 GDI 6.87 US qt. (6.5)
MICHANG ATF SP-IV, SK ATF SP-IV, NOCA ATF SP-IV, HYUNDAI genuine ATF SP-IV or other brands meeting the above specification approved by HYUNDAI Motor Co.
Dual clutch transmission fluid
Smartstream G2.5 T-GDI
Gear oil 3.49 ~ 3.59
US qt. (3.3~3.4)
SAE 70W, API GL-4, WDGO-1 GS WDCTF HD G 70W (GS CALTEX)
Control oil 2.59 ~ 2.64
US qt. (2.45~2.50)
SAE 70W, API GL-4, WDHO-1 GS WDCTF HD H 70W (GS CALTEX)
*1 : Refer to the recommended SAE viscosity numbers. *2 : Requires
lower grade engine oil (mineral oil including Semi-synthetic) is used, then the engine oil and oil filter must be replaced as indicated severe maintenance condition.
02
2-13
Lubricant Volume Classification
Coolant Smartstream G2.5 GDI 7.5 US qt.
(7.1) Mixture of antifreeze and water (Phosphate-based Ethylene glycol coolant for aluminum radiator)Smartstream G2.5 T-GDI 8.17 US qt.
(7.73)
Brake fluid As required SAE J1704 DOT-4 LV, FMVSS 116 DOT-4, ISO4925 CLASS-6
Rear differential oil (4WD) 0.56 ~ 0.67 US qt. (0.53~0.63)
HYPOID GEAR OIL API GL-5, SAE 75W/85 (SK HCT-5 GEAR OIL 75W/85 or EQUIVALENT)
Transfer case oil (4WD)
DCT 0.51 ~ 0.55 US qt. (0.48~0.52)
A/T 0.66 ~ 0.72 US qt. (0.62~0.68)
Fuel 70.8 US qt. (67)
Refer to Fuel requirements in chapter 1.
DCT : Dual clutch transmission A/T : Automatic transmission
Vehicle Information, Consumer Information and Reporting Safety Defects
2-14
Recommended SAE viscosity number
CAUTION Always be sure to clean the area around any filler plug, drain plug, or dipstick before checking or draining any lubricant. This is especially important in dusty or sandy areas and when the vehicle is used on unpaved roads. Cleaning the plug and dipstick areas will prevent dirt and grit from entering the engine and other mechanisms that could be damaged.
Engine oil viscosity (thickness) has an effect on fuel economy and cold weather operating (engine start and engine oil flowability). Lower viscosity engine oils can provide better fuel economy and cold weather performance, however, higher viscosity engine oils are required for satisfactory lubrication in hot weather. Using oils of any viscosity other than those recommended could result in engine damage. When choosing an oil, consider the range of temperature your vehicle will be operated in before the next oil change. Proceed to select the recommended oil viscosity from the chart.
Temperature Range for SAE Viscosity Numbers
Temperature C -30 -20 -10 0 10 20 30 40 50
(F) -10 0 20 40 60 80 100 120
Engine Oil *1
Smartstream G2.5 GDI
0W-20
Smartstream G2.5 T-GDI 0W-30
*1 : Requires
An engine oil displaying this API Certification Mark conforms to the international Lubricant Specification Advisory Committee (ILSAC). It is recommended to only use engine oils that uphold this API Certification Mark.
02
2-15
VEHICLE IDENTIFICATION nUmbER (VIn) Frame number
OTMA088011
The vehicle identification number (VIN) is the number used in registering your vehicle and in all legal matters pertaining to its ownership, etc. The number is punched on the floor under the passenger seat. To check the number, open the cover.
VIN label (if equipped)
OTM010023L
The VIN is also on a plate attached to the top of the left side dashboard. The number on the plate can easily be seen through the windshield from outside.
VEHICLE CERTIFICATION LABEL
OTM010022
The vehicle certification label attached on the drivers (or front passengers) side center pillar gives the vehicle identification number (VIN).
TIRE SPECIFICATION AND PRESSURE LABEL
OTM010024L
The tires supplied on your new vehicle are chosen to provide the best performance for normal driving. The tire label located on the drivers side center pillar gives the tire pressures recommended for your vehicle.
Vehicle Information, Consumer Information and Reporting Safety Defects
2-16
ENGINE NUMBER Smartstream G2.5 GDI
OTMA010020
Smartstream G2.5 T-GDI
OTMA010021
The engine number is stamped on the engine block as shown in the drawing.
REFRIGERANT LABEL (IF EQUIppED)
OTM088005
The refrigerant label provides information such as refrigerant type and amount. (R-1234yf)
02
2-17
This consumer information has been prepared in accordance with regulations issued by the National Highway Traffic Safety Administration of the U.S. Department of Transportation.Your HYUNDAI dealer will help answer any questions you may have as you read this information. HYUNDAI motor vehicles are designed and manufactured to meet or exceed all applicable safety standards. For your safety, however, we strongly urge you to read and follow all directions in this Owners Manual, particularly the information under the headings NOTICE, CAUTION and WARNING. If, after reading this manual, you have any questions regarding the operation of your vehicle, please contact the Hyundai Customer Care Center.
Hyundai Customer Care P.O. Box 20850 Fountain Valley, CA 92728 800-633-5151 consumeraffairs@hmausa.com
Hyundais Customer Care Center representatives are available Monday through Friday, between the hours of 6:00 AM and 5:00 PM PST and Saturday between 6:30 AM and 3:00 PM PST (English). For Customer Care Center assistance in Spanish or Korean, representatives are available Monday through Friday between 6:30 AM and 3:00 PM PST.
CONSUMER INFORMATION
Vehicle Information, Consumer Information and Reporting Safety Defects
2-18
If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying HYUNDAI MOTOR AMERICA.
To contact NHTSA, you may call the Vehicle Safety Hotline toll-free at 1-888-327-4236 (TTY: 1-800-424-9153); go to http://www.safercar.gov; download the SaferCar mobile application; or write to: Administrator, NHTSA
1200 New Jersey Ave, SE, West Building Washington, D.C. 20590.
You can also obtain other information about motor vehicle safety from http://www.safercar.gov.
If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However, NHTSA cannot become involved in individual problems between you, your dealer, or HYUNDAI MOTOR AMERICA.
REPORTING SAFETY DEFECTS
3
Seats & Safety System
3. Seats & Safety System
Important safety precautions ...........................................................................3-2 Always wear your seat belt ..........................................................................................3-2 Restrain all children ......................................................................................................3-2 Air bag hazards .............................................................................................................3-2 Driver distraction ..........................................................................................................3-2 Control your speed .......................................................................................................3-2 Keep your vehicle in safe condition ............................................................................3-2
Seats .................................................................................................................. 3-3 Safety precautions .......................................................................................................3-4 Front seats ....................................................................................................................3-5 Rear seats ................................................................................................................... 3-10 Head Restraints .......................................................................................................... 3-14 Seat warmers .............................................................................................................. 3-18 Air ventilation seat......................................................................................................3-20 Rear Occupant Alert (ROA) .........................................................................................3-21
Seat belts ......................................................................................................... 3-23 Seat belt safety precautions ......................................................................................3-23 Seat belt warning light ...............................................................................................3-24 Seat belt restraint system ..........................................................................................3-25 Additional seat belt safety precautions .....................................................................3-31 Care of seat belts........................................................................................................3-33
Child Restraint System (CRS) ......................................................................... 3-34 Children Always in the Rear .......................................................................................3-34 Selecting a Child Restraint System (CRS) .................................................................3-35 Installing a Child Restraint System (CRS) ................................................................. 3-37
Air bag - supplemental restraint system ....................................................... 3-45 Where are the air bags? .............................................................................................3-47 How does the air bags system operate? .................................................................. 3-50 What to expect after an air bag inflates ...................................................................3-53 Occupant Classification System (OCS) .....................................................................3-54 Why didnt my air bag go off in a collision? ............................................................. 3-60 SRS care ......................................................................................................................3-65 Additional safety precautions................................................................................... 3-66 Air bag warning labels............................................................................................... 3-66
This chapter provides you with important information about how to protect yourself and your passengers. It explains how to properly use your seats and seat belts, and how your air bags work. Additionally, this chapter explains how to properly restrain infants and children in your vehicle.
Seats & Safety System
3-2
You will find many safety precautions and recommendations throughout this section, and throughout this manual. The safety precautions in this section are among the most important.
Always wear your seat belt A seat belt is your best protection in all types of accidents. Air bags are designed to supplement seat belts, not replace them. So even though your vehicle is equipped with air bags, ALWAYS make sure you and your passengers wear your seat belts, and wear them properly.
Restrain all children All children under age 13 should ride in your vehicle properly restrained in a rear seat, not the front seat. Infants and small children should be restrained in an appropriate Child Restraint System. Larger children should use a booster seat with the lap/shoulder belt until they can use the seat belt properly without a booster seat.
Air bag hazards While air bags can save lives, they can also cause serious or fatal injuries to occupants who sit too close to them, or who are not properly restrained. Infants, young children, and short adults are at the greatest risk of being injured by an inflating air bag. Follow all instructions and warnings in this manual.
Driver distraction Driver distraction presents a serious and potentially deadly danger, especially for inexperienced drivers. Safety should be the first concern when behind the wheel and drivers need to be aware of the wide array of potential distractions, such as drowsiness, reaching for objects, eating, personal grooming, other passengers, and using mobile phones.
Drivers can become distracted when they take their eyes and attention off the road or their hands off the wheel to focus on activities other than driving. To reduce your risk of distraction and an accident: ALWAYS set up your mobile devices
(i.e., MP3 players, phones, navigation units, etc.) when your vehicle is parked or safely stopped.
ONLY use your mobile device when allowed by laws and conditions permit safe use. NEVER text or email while driving. Most countries have laws prohibiting drivers from texting. Some countries and cities also prohibit drivers from using handheld phones.
NEVER let the use of a mobile device distract you from driving. You have a responsibility to your passengers and others on the road to always drive safely, with your hands on the wheel as well as your eyes and attention on the road.
Control your speed Excessive speed is a major factor in crash injuries and deaths. Generally, the higher the speed, the greater the risk, but serious injuries can also occur at lower speeds. Never drive faster than is safe for current conditions, regardless of the maximum speed posted.
Keep your vehicle in safe condition Having a tire blowout or a mechanical failure can be extremely hazardous. To reduce the possibility of such problems, check your tire pressures and condition frequently, and perform all regularly scheduled maintenance.
IMPORTANT SAFETY PRECAUTIONS
3-3
03
Front seat (1) Forward and rearward (2) Seatback angle (3) Seat cushion angle (4) Seat cushion height (5) Seat cushion length* (6) Lumbar support (Drivers seat)* (7) Seat warmer* (8) Air ventilation seat* (9) Head restraints
2nd row seat (10) Seatback angle (11) Head restraints (12) Seat warmer* (13) 2nd row seat remote folding switch*
*: if equipped
SEATS
The information provided may differ depending on which functions are applicable to your vehicle.
OTMA030001
Seats & Safety System
3-4
Safety precautions Adjusting the seats so that you are sitting in a safe and comfortable position plays an important role for the safety of the driver and passengers, along with seat belts and air bags when in an accident.
WARNING Do not use a cushion that reduces friction between the seat and the passenger. The passengers hips may slide under the lap portion of the seat belt during an accident or a sudden stop. Serious or fatal internal injuries could result because the seat belt cannot operate properly.
Air bags You can take steps to reduce the risk of being injured by an inflating air bag. Sitting too close to an air bag greatly increases the risk of injury in the event the air bag inflates. The National Highway Traffic Safety Administration (NHTSA) recommends that drivers allow at least 10 inches (25cm) between the center of the steering wheel and their chest.
WARNING To reduce the risk of serious injury or death from an inflating air bag, take the following precautions: Adjust the drivers seat as far to the
rear as possible maintaining the ability to control the vehicle.
Adjust the front passenger seat as far to the rear as possible.
Hold the steering wheel by the rim with hands at the 9 oclock and 3 oclock positions to minimize the risk of injuries to your hands and arms.
NEVER place anything or anyone between you and the air bag.
Do not allow the front passenger to place feet or legs on the dashboard to minimize the risk of leg injuries.
Seat belts Always fasten your seat belt before starting any trip. At all times, passengers should sit upright and be properly restrained. Infants and small children must be restrained in appropriate Child Restraint Systems. Children who have outgrown a booster seat and adults must be restrained using the seat belts.
WARNING Take the following precautions when adjusting your seat belt: NEVER use one seat belt for more
than one occupant. Always position the seatback upright
with the lap portion of the seat belt snug and low across the hips.
NEVER allow children or small infants to ride on a passengers lap.
Do not route the seat belt across your neck, across sharp edges, or reroute the shoulder strap away from your body.
Do not allow the seat belt to become caught or jammed.
03
3-5
Front seats
WARNING Take the following precautions when adjusting your seat: NEVER attempt to adjust the seat
while the vehicle is moving. The seat could respond with unexpected movement and may cause loss of vehicle control resulting in an accident.
Do not place anything under the front seats. Loose objects in the drivers foot area could interfere with the operation of the foot pedals, causing an accident.
Do not allow anything to interfere with the normal position and proper locking of the seatback.
Do not place a cigarette lighter on the floor or seat. When you operate the seat, gas may exit out of the lighter causing a fire.
Use extreme caution when picking up small objects trapped under the seats or between the seat and the center console. Your hands might be cut or injured by the sharp edges of the seat mechanism.
If there are occupants in the rear seats, be careful while adjusting the front seat position.
Make sure that the seat is locked in place after the adjustment. If not, the seat might move unexpectedly resulting in an accident.
CAUTION To prevent injury: Do not adjust your seat while
wearing your seat belt. Moving the seat cushion forward may cause strong pressure on your abdomen.
Do not allow your hands or fingers to get caught in the seat mechanisms while the seat is moving.
Seats & Safety System
3-6
Manual adjustment The front seat can be adjusted by using the levers located on the outside of the seat cushion. Before driving, adjust the seat to the proper position so that you can easily control the steering wheel, foot pedals and controls on the instrument panel.
OTM030038
Forward and rearward adjustment To move the seat forward or rearward: 1. Pull up the seat slide adjustment lever
and hold it. 2. Slide the seat to the position you
desire. 3. Release the lever and make sure the
seat is locked in place. Move forward and rearward without using the lever. If the seat moves, it is not locked properly.
OTM030039
Seatback angle To recline the seatback: 1. Lean forward slightly and lift up the
seatback lever. 2. Carefully lean back on the seat and
adjust the seatback to the position you desire.
3. Release the knob and make sure the seatback is locked in place.
Reclining seatback Sitting in a reclined position when the vehicle is in motion can be dangerous. Even when buckled up, the protections of your restraint system (seat belts and/or air bags) is greatly reduced by reclining your seatback.
WARNING NEVER ride with a reclined seatback when the vehicle is moving. Riding with a reclined seatback increases your chance of serious or fatal injuries in the event of a collision or sudden stop. Drivers and passengers should ALWAYS sit well back in their seats, properly belted, and with the seatbacks upright.
03
3-7
Seat belts must be snug against your hips and chest to work properly. When the seatback is reclined, the shoulder belt cannot do its job because it will not be snug against your chest. Instead, it will be in front of you. During an accident, you could be thrown into the seat belt, causing neck or other injuries. The more the seatback is reclined, the greater chance the passengers hips will slide under the lap belt or the passengers neck will strike the shoulder belt.
OTM030040
Seat cushion height To change the height of the seat cushion: Push down the lever several times, to
lower the seat cushion. Pull up the lever several times, to raise
the seat cushion.
Power adjustment (if equipped)
The front seat can be adjusted by using the control switches located on the outside of the seat cushion. Before driving, adjust the seat to the proper position so that you can easily control the steering wheel, foot pedals and controls on the instrument panel.
WARNING NEVER allow children in the vehicle unattended. The power seats are operable when the vehicle is turned off.
NOTICE To prevent damage to the seats: Always stop adjusting the seats when
the seat has been adjusted as far forward or rearward as possible.
Do not adjust the seats longer than necessary when the vehicle is turned off. This may result in unnecessary battery drain.
Do not operate two or more seats at the same time. This may result in an electrical malfunction.
Seats & Safety System
3-8
OTM030047
Forward and rearward adjustment To move the seat forward or rearward: 1. Push the control switch forward or
rearward. 2. Release the switch once the seat
reaches the desired position.
OTM030050
Seatback angle To recline the seatback: 1. Push the control switch forward or
rearward. 2. Release the switch once the seatback
reaches the desired position.
Reclining seatback Sitting in a reclined position when the vehicle is in motion can be dangerous. Even when buckled up, the protections of your restraint system (seat belts and air bags) is greatly reduced by reclining your seatback.
WARNING NEVER ride with a reclined seatback when the vehicle is moving. Riding with a reclined seatback increases your chance of serious or fatal injuries in the event of a collision or sudden stop. Driver and passengers should ALWAYS sit well back in their seats, properly belted, and with the seatbacks upright.
03
3-9
Seat belts must be snug against your hips and chest to work properly. When the seatback is reclined, the shoulder belt cannot do its job because it will not be snug against your chest. Instead, it will be in front of you. During an accident, you could be thrown into the seat belt, causing neck or other injuries. The more the seatback is reclined, the greater chance the passengers hips will slide under the lap belt or the passengers neck will strike the shoulder belt.
OTM030054
Seat cushion tilt (1) To change the angle of the front part of the seat cushion: Push the front portion of the control switch up to raise or down to lower the front part of the seat cushion. Release the switch once the seat reaches the desired position.
Seat cushion height (2) To change the height of the seat cushion: Push the rear portion of the control switch up to raise or down to lower the height of the seat cushion. Release the switch once the seat reaches the desired position.
Seat cushion extension adjustment (for driver's seat) (if equipped)
OTM030045
To move the front part of cushion forward: 1. Push the front part of control switch
to move the seat cushion to the desired length.
2. Release the switch once the seat cushion reaches the desired length.
To move the front part of cushion rearward: 1. Push the rear part of control switch to
move the seat cushion to the desired length.
2. Release the switch once the seat cushion reaches the desired length.
Seats & Safety System
3-10
OTM030055
Lumbar support (for drivers seat, if equipped) To adjust the lumbar support: 1. Press the front portion of the switch
(1) to increase support or the rear portion of the switch (2) to decrease support.
2. Press switch (3) or (4) to move the support position up or down.
3. Release the switch once the lumbar support reaches the desired position.
Seatback pocket
OTM030046
The seatback pocket is provided on the back of the front seatbacks.
CAUTION Do not put heavy or sharp objects in the seatback pockets. In an accident they could come loose from the pocket and injure occupants.
Rear seats
OTM030065
Forward and backward (2nd row seat) To move the seat forward or backward: 1. Pull the seat slide adjustment lever up
and hold it. 2. Slide the seat to the position you
desire. 3. Release the lever and make sure the
seat is locked in place. Adjust the seat before driving, and make sure the seat is locked securely by trying to move forward and backward without using the lever. If the seat moves, it is not locked properly.
03
3-11
OTM030067
Seatback angle (2nd row seat) To recline the seatback: 1. Pull up the seatback recline lever. 2. Hold the lever and adjust the seatback
of the seat to the position you desire. 3. Release the lever and make sure the
seatback is locked in place. (The lever MUST return to its original position for the seatback to lock.)
Folding the rear seat The rear seatbacks can be folded to facilitate carrying long items or to increase the luggage capacity of the vehicle.
WARNING Never allow passengers to sit on top
of the folded down seatback while the vehicle is moving. This is not a proper seating position and no seat belts are available for use. This could result in serious injury or death in case of an accident or sudden stop.
Objects carried on the folded down seatback should not extend higher than the top of the front seatbacks. This could allow cargo to slide forward and cause injury or damage during sudden stops.
To fold down the rear seatback: 1. Set the front seatback to the upright
position and if necessary, slide the front seat forward.
2. Lower the rear head restraints to the lowest position.
OTM030049
3. Route the seat belt webbing through the rear seat belt guides to prevent the belts from being trapped behind or under the seats.
Seats & Safety System
3-12
OTM030073
4. Pull on the seatback folding lever (2nd row seat), then fold the seat toward the front of the vehicle. When you return the seatback to its upright position, always be sure it has locked into position by pushing on the top of the seatback.
OTM030074
5. To use the rear seat, lift and pull the seatback backward by pulling the folding lever or the strap. Pull the seatback firmly until it clicks into place. Make sure the seatback is locked in place.
6. Return the rear seat belt to the proper position.
WARNING When returning the rear seatback from a folded to an upright position, hold the seatback and return it slowly. Ensure that the seatback is completely locked into its upright position by pushing on the top of the seatback. In an accident or sudden stop, the unlocked seatback could allow cargo to move forward with great force and enter the passenger compartment, which could result in serious injury or death.
WARNING Do not place objects in the rear seats, since they cannot be properly secured and may hit vehicle occupants in a collision causing serious injury or death.
03
3-13
WARNING Make sure the engine is off, the shift lever is in P (Park), and the parking brake is securely applied whenever loading or unloading cargo. Failure to take these steps may allow the vehicle to move if the shift lever is inadvertently moved to another position.
CAUTION Be careful when loading cargo
through the rear passenger seats to prevent damage to the vehicle interior.
When cargo is loaded through the rear passenger seats, ensure the cargo is properly secured to prevent it from moving while driving.
WARNING Cargo should always be secured to prevent it from being thrown about the vehicle in a collision and causing injury to the vehicle occupants. Do not place objects in the rear seats, since they cannot be properly secured and may hit the front seat occupants in a collision.
2nd row seat folding (if equipped) (from outside)
OTMA038034
Push the 2nd row seat back folding switch (1) located in the right side in the liftgate. (L : Left seatback folding, R : Right seatback folding)
WARNING Rear seat folding Do not fold the rear seats, if passengers, pets or luggage are in the rear seats. It may cause injury or damage to passengers, pets, luggage.
Seats & Safety System
3-14
Armrest
OTM030048
The armrest is located in the center of the rear seat. Pull the armrest down from the seatback to use it.
Rear occupant alert system (2nd seat) This function alerts driver when you get out of a car while the passengers remain in the 2nd row seat. If the front door is opened with passengers in the 2nd row seats, A warning message will appear in the instrument cluster. After the 1st warning if movement is detected in the 2nd row seat after all doors are locked, a second audible warning will be triggered. Even if your vehicle is equipped with Rear Occupant Alert, always make sure to check the rear seat before you leave the vehicle. For more information, refer to the Rear occupant alert system in chapter 3.
Head Restraints The vehicles front and rear (second row and/or third row) seats have adjustable head restraints. The head restraints provide comfort for passengers, but more importantly they are designed to help protect passengers from whiplash and other neck and spinal injuries during an accident, especially in a rear impact collision.
WARNING To reduce the risk of serious injury or death in an accident, take the following precautions when adjusting your head restraints: Always properly adjust the head
restraints for all passengers BEFORE starting the vehicle.
NEVER let anyone ride in a seat with the head restraints removed or reversed.
OHI039190N
Adjust the head restraints so the middle of the head restraints is at the same height as the height of the top of the eyes.
NEVER adjust the head restraints position of the drivers seat when the vehicle is in motion.
Adjust the head restraints as close to the passengers head as possible. Do not use a seat cushion that holds the body away from the seatback.
Make sure the head restraints locks into position after adjusting it.
03
3-15
WARNING
OTL035061
When sitting on the rear seat, do not adjust the height of the head restraints to the lowest position.
CAUTION When there is no occupant in the rear seats, adjust the height of the head restraints to the lowest position. The rear seat head restraints can reduce the visibility of the rear area.
NOTICE To prevent damage, NEVER hit or pull on the head restraints.
Front seat head restraints
OOSEV038012L
The drivers and front passengers seats are equipped with adjustable head restraint for the passengers safety and comfort.
OTM030056
Adjusting the height up and down To raise the head restraint: 1. Pull it up to the desired position (1).
To lower the head restraint: 1. Push and hold the release button (2)
on the head restraint support. 2. Lower the head restraint to the
desired position (3).
Seats & Safety System
3-16
NOTICE
OHI038136
If you recline the seatback towards the front with the head restraint and seat cushion raised, the head restraint may come in contact with the sunvisor or other parts of the vehicle.
Type A
OTM030058
Type B
OTM030059
Removal/Reinstall To remove the head restraint: 1. Recline the seatback (2) with the
seatback angle lever (1). 2. Raise the head restraint as far as it can
go. 3. Press the head restraint release button
(3) while pulling the head restraint up (4).
WARNING NEVER allow anyone to travel in a seat with the head restraint removed.
03
3-17
Type A
OTM030061
Type B
OTM030063
To reinstall the head restraint : 1. Recline the seatback. 2. Put the head restraint poles (2) into
the holes while pressing the release button (1).
3. Adjust the head restraint to the appropriate height.
4. Recline the seatback (4) with the seatback angle lever (3).
WARNING Always make sure the head restraint locks into position after reinstalling and adjusting it properly.
Rear seat head restraint
OOSEV038030L
The rear seats are equipped with head restraint in all the seating positions for the passengers safety and comfort.
OTM030070
Adjusting the height up and down To raise the head restraint: 1. Pull it up to the desired position (1).
To lower the head restraint: 1. Push and hold the release button (2)
on the head restraint support. 2. Lower the head restraint to the
desired position (3).
Seats & Safety System
3-18
OTM030071
Removal/Reinstallation To remove the head restraint: 1. Raise the head restraint as far as it can
go. 2. Press the head restraint release button
(1) while pulling the headrest up (2).
To reinstall the head restraint: 1. Put the head restraint poles into the
holes (3) while pressing the release button (1).
2. Adjust the head restraint to the appropriate height.
Seat warmers (if equipped) Seat warmers are provided to warm the seats during cold weather. During mild weather or under conditions where the operation of the seat warmer is not needed, keep the seat warmers OFF.
WARNING The seat warmers can cause a SERIOUS BURN, even at low temperatures and especially if used for long periods of time. Passengers must be able to feel if the seat is becoming too warm so they can turn it off, if needed. People who cannot detect temperature change or pain to the skin should use extreme caution, especially the following types of passengers: Infants, children, elderly or disabled
persons, or hospital outpatients. People with sensitive skin or who
burn easily. Fatigued individuals. Intoxicated individuals. People taking medication that can
cause drowsiness or sleepiness.
WARNING NEVER place anything on the seat that insulates against heat when the seat warmer is in operation, such as a blanket or seat cushion. This may cause the seat warmer to overheat, causing a burn or damage to the seat.
03
3-19
NOTICE To prevent damage to the seat warmers and seats: Never use a solvent such as paint
thinner, benzene, alcohol or gasoline to clean the seats.
Do not place heavy or sharp objects on seats equipped with seat warmers.
Do not change the seat cover. It may damage the seat warmer.
Front seat
OTM030002
Rear seat
OTM030078
While the engine is running, push either of the switches to warm the driver's seat or front passenger's seat. During mild weather or under conditions where the operation of the seat warmer is not needed, keep the switches in the OFF position. Manual temperature control
Each time you push the switch, the temperature setting of the seat is changed as follows: - Front seat
OFF
LOW ( )
HIGH ( )
MIDDLE ( )
- Rear seat
OFF HIGH ( ) LOW ( )
Automatic temperature control The seat warmer starts to automatically control the seat temperature in order to prevent low-temperature burns after being manually turned ON. - Front seat
OFF
30 MIN
60 MIN LOW ( )
HIGH ( )
MIDDLE ( )
- Rear seat
OFF HIGH ( ) LOW ( ) 30 MIN
If HIGH temperature is manually selected again, the temperature will be controlled automatically.
Seats & Safety System
3-20
When pressing the switch for more than 1.5 seconds with the seat warmer operating, the seat warmer will turn OFF.
The seat warmer defaults to the OFF position whenever the ignition switch is ON.
Auto Comfort Control (for drivers seat) (if equipped) - The seat warmer automatically
controls the seat temperature depending on the ambient temperature and the set climate control temperature when the engine is running. If the seat warmer switch is pushed, the seat warmer will have to be controlled manually. To use this function, it must be activated from the Settings menu in the AV/AVN system screen.
- The seat warmer defaults to the OFF position whenever the ignition switch is ON. However, if the Auto Comfort Control function is ON, the drivers seat warmer will turn on and off depending on the ambient temperature and the set climate control temperature.
For more details, refer to the separately supplied Infotainment manual with your vehicle.
Information With the seat warmer switch in the ON position, the heating system in the seat turns off or on automatically depending on the seat temperature.
Air ventilation seat (if equipped)
OTM030003
The air ventilation seats are provided to cool the front seats by blowing air through small vent holes on the surface of the seat cushions and seatbacks. When the operation of the air ventilation seat is not needed, keep the switches in the OFF position. While the engine is running, push the switch to cool the driver's seat or the front passenger's seat (if equipped).
NOTICE To prevent damage to the air ventilation seats: Never use a solvent such as paint
thinner, benzene, alcohol or gasoline to clean the seats.
Avoid spilling liquids on the surface of the front seats and seatbacks; this may cause the air vent holes to become blocked and not work properly.
Do not place materials such as plastic bags or newspapers under the seats. They may block the air intake causing the air vents to not work properly.
Do not change the seat covers. It may damage the air ventilation seat.
If the air vents do not operate, restart the vehicle. If there is no change, we recommend that you have your vehicle inspected by an authorized HYUNDAI dealer.
03
3-21
Each time you push the switch, the airflow changes as follows:
OFF
LOW ( )
HIGH ( )
MIDDLE ( )
When pressing the switch for more than 1.5 seconds with the air ventilation seat operating, the operation will turn OFF.
The air ventilation seats defaults to the OFF position whenever the ignition switch is placed to the ON position.
Auto Comfort Control (for drivers seat) (if equipped) - The air ventilation seats
automatically controls the seat temperature depending on the ambient temperature and the set climate control temperature when the engine is running. If the air ventilation seats switch is pushed, the air ventilation seats will have to be controlled manually. To use this function, it must be activated from the Settings menu in the AV/AVN system screen.
- The air ventilation seats defaults to the OFF position whenever the ignition switch is ON. However, if the Auto Comfort Control function is ON, the air ventilation seats will turn on and off depending on the ambient temperature and the set climate control temperature.
For more details, refer to the separately supplied Infotainment manual with your vehicle.
Rear Occupant Alert (ROA) (if equipped) Rear Occupant Alert is provided to help prevent the driver from leaving the vehicle with the rear passenger left in the vehicle.
System setting To use Rear Occupant Alert, it must be enabled from the Settings menu in the infotainment system screen. Select: - SetupVehicleSettings ConvenienceRearOccupantAlert
For detailed information, scan the QR code in the separately supplied simple manual.
System operation First alert
When you open the front door after opening and closing the rear door and turning off the engine, the Check rear seats warning message appears on the cluster.
Second alert After the first alert, the second alert operates when any movement is detected in the vehicle after the drivers door is closed and all the doors are locked. The horn will sound for approximately 25 seconds. If the system continues to detect a movement, the alert operates up to 8 times. Unlock the doors with the smart key to stop the alert.
The system detects movement in the vehicle for 8 hours after the door is locked.
The second alert is activated only after the prior activation of the first alert.
Seats & Safety System
3-22
System precautions Make sure that all the windows are
closed. If the window is open, the alert may operate by the sensor detecting an unintended movement (e.g. wind or bugs).
Cluster Steering wheel
OTM048165L OTM050216
If you do not want to use Rear Occupant Alert, press the OK button on the steering wheel when the first alert is displayed on the cluster. Doing so will deactivate the second alert one time.
An alert can occur if the there is an impact on the roof.
If boxes or objects are stacked in the vehicle, the system may not detect the boxes or objects. Or, the alert may operate if the boxes or objects fall off.
The sensor may not operate normally if the senor is obscured by foreign substances.
The alert may operate if movement in the driver or passenger seat is detected.
The alert may operate with the doors locked due to car wash or surrounding vibration or noise.
If the vehicle is started remotely (if equipped with Remote Start), inside movement detection will stop.
WARNING Even if your vehicle is equipped with Rear Occupant Alert, always make sure to check the rear seat before you leave the vehicle. Rear Occupant Alert may not operate when: Movement does not continue for
a certain period of time or the movement is small.
The rear passenger is covered with an object such as a blanket.
Always be cautious of the passengers safety as the detection function and second alert may not operate depending on the surrounding environment and certain conditions.
03
3-23
SEAT BELTS This section describes how to use the seat belts properly. It also describes some of the things not to do when using seat belts.
Seat belt safety precautions Always fasten your seat belt and make sure all passengers have fastened their seat belts before starting any trip. Air bags are designed to supplement the seat belt as an additional safety device, but they are not a substitute. Most countries require all occupants of a vehicle to wear seat belts.
WARNING Seat belts must be used by ALL passengers whenever the vehicle is moving. Take the following precautions when adjusting and wearing seat belts: Children under the age of 13 should
be properly restrained in the rear seats.
Never allow children to ride in the front passenger seat, unless the air bag is deactivated. If a child is seated in the front passenger seat, move the seat as far back as possible and properly restrain them in the seat.
NEVER allow an infant or child to be carried on an occupants lap.
NEVER ride with the seatback reclined when the vehicle is moving.
Do not allow children to share a seat or seat belt.
Do not wear the shoulder belt under your arm or behind your back.
Never wear a seat belt over fragile objects. If there is a sudden stop or impact, the seat belt can damage it.
Do not use the seat belt if it is twisted. A twisted seat belt will not protect you properly in an accident.
Do not use a seat belt if the webbing or hardware is damaged.
Do not latch the seat belt into the buckles of other seats.
NEVER unfasten the seat belt while driving. This may cause loss of vehicle control resulting in an accident.
Make sure there is nothing in the buckle interfering with the seat belt latch mechanism. This may prevent the seat belt from fastening securely.
No modifications or additions should be made by the user which will either prevent the seat belt adjusting devices from operating to remove slack, or prevent the seat belt assembly from being adjusted to remove slack.
WARNING Damaged seat belts and seat belt assemblies will not operate properly. Always replace: Frayed, contaminated, or damaged
webbing. Damaged hardware. The entire seat belt assembly after it
has been worn in an accident, even if damage to webbing or assembly is not apparent.
Seats & Safety System
3-24
Seat belt warning light Seat belt warning light (for drivers seat) Instrument cluster
OTM030004
As a reminder to the driver, the seat belt warning light will illuminate for approximately 6 seconds each time you place the ignition switch to the ON position regardless of belt fastening. At this time, if the seat belt is not fastened a warning chime will sound for 6 seconds.
If you continue not to fasten the seat belt and you drive over 6 mph (9 km/h), the warning light will stay illuminated. If you continue not to fasten the seat belt and you drive over 12 mph (20 km/h), the seat belt warning chime will sound for approximately 100 seconds and the corresponding warning light will blink.
If you unfasten the seat belt while driving under 12 mph (20 km/h), the seat belt warning light will illuminate until the seat belt is fastened. If you unfasten the seat belt while driving over 12 mph (20 km/h), the seat belt warning chime will sound for approximately 100 seconds and the corresponding warning light will blink.
Seat belt warning light (for front passengers seat) As a reminder to the front passenger, the front passengers seat belt warning lights will illuminate for approximately 6 seconds each time you place the ignition switch to the ON position regardless of belt fastening.
If you continue not to fasten the seat belt and you drive over 12 mph (20 km/h), the seat belt warning chime will sound for approximately 100 seconds and the corresponding warning light will blink.
If you unfasten the seat belt while driving under 12 mph (20 km/h), the seat belt warning light will illuminate until the seat belt is fastened. If you unfasten the seat belt while driving over 12 mph (20 km/h), the seat belt warning chime will sound for approximately 100 seconds and the corresponding warning light will blink.
WARNING Riding in an improper position adversely affects the front passengers seat belt warning system. It is important for the driver to instruct the passenger to properly be seated as instructed in this manual.
Information Although the front passenger seat is not
occupied, the seat belt warning light will blink or illuminate for 6 seconds.
The front passengers seat belt warning may operate when luggage is placed on the front passenger seat.
03
3-25
Seat belt restraint system
WARNING
OHI038182L
Improperly positioned seat belts may increase the risk of serious injury in an accident. Take the following precautions when adjusting the seat belt: Position the lap portion of the seat
belt as low as possible across your hips, not on your waist, so that it fits snugly. This allows your strong pelvic bones to absorb the force of the crash, reducing the chance of internal injuries.
Position one arm under the shoulder belt and the other over the belt, as shown in the illustration.
Always position the shoulder belt anchor into the locked position at the appropriate height.
Never position the shoulder belt across your neck or face.
Front Seat Belt Drivers 3point system with emergency locking retractor
OHI038140
To fasten your seat belt: Pull it out of the retractor and insert the metal tab (1) into the buckle (2). There will be an audible click when the tab locks into the buckle.
OHI038137
You should place the lap belt (1) portion across your hips and the shoulder belt (2) portion across your chest. The seat belt automatically adjusts to the proper length after the lap belt portion is adjusted manually so that it fits snugly around your hips. If you lean forward in a slow, easy motion, the belt will extend and move with you. If there is a sudden stop or impact, the belt will lock into position. It will also lock if you try to lean forward too quickly.
Seats & Safety System
3-26
Information If you are not able to smoothly pull enough of the seat belt out from the retractor, firmly pull the seat belt out and release it. After release, you will be able to pull the belt out smoothly.
Height adjustment You can adjust the height of the shoulder belt anchor to one of the four different positions for maximum comfort and safety. The shoulder portion should be adjusted so it lies across your chest and midway over your shoulder nearest the door, not over your neck.
Front seat
OTM030079
To adjust the height of the seat belt anchor, lower or raise the height adjuster into an appropriate position. To raise the height adjuster, pull it up (1). To lower it, push it down (3) while pressing the height adjuster button (2). Release the button to lock the anchor into position. Try sliding the height adjuster to make sure that it has locked into position.
OHI038142
To release your seat belt: Press the release button (1) in the locking buckle. When it is released, the belt should automatically draw back into the retractor. If this does not happen, check the belt to be sure it is not twisted, then try again.
03
3-27
Rear Seat Belt Passengers 3point system with convertible locking retractor This type of seat belt combines the features of both an emergency locking retractor seat belt and an automatic locking retractor seat belt. Convertible retractor type seat belts are installed in the rear seat positions to help accommodate the installation of child restraint systems. Although a convertible retractor is also installed in the front passenger seat position, NEVER place any infant/child restraint system in the front seat of the vehicle.
To fasten your seat belt: Pull the seat belt out of the retractor and insert the metal tab into the buckle. There will be an audible click when the tab locks into the buckle. When not securing a child restraint, the seat belt operates in the same way as the drivers seat belt (Emergency Locking Retractor Type). It automatically adjusts to the proper length only after the lap belt portion of the seat belt is adjusted manually so that it fits snugly across your hips. When the seat belt is fully extended from the retractor to allow the installation of a child restraint system, the seat belt operation changes to allow the belt to retract, but not to extend (Automatic Locking Retractor Type). Refer to the Using a Child Restraint System section in this chapter.
OHI038142
To release your seat belt: Press the release button (1) in the locking buckle. When it is released, the belt should automatically draw back into the retractor. If this does not happen, check the belt to be sure it is not twisted, then try again.
NOTICE Although the seat belt retractor provides the same level of protection for seated passengers in either emergency or automatic locking modes, the emergency locking mode allows seated passengers to move freely in their seat while keeping some tension on the belt. During a collision or sudden stop, the retractor automatically locks the belt to help restrain your body. To deactivate the automatic locking mode, unbuckle the seat belt and allow the belt to fully retract.
Seats & Safety System
3-28
Second row center seatbelt (3-point rear center seat belt)
OTM038041
1. Insert the tongue plate (1) into the buckle (2) until an audible click" is heard, indicating the latch is locked. Make sure the belt is not twisted.
When using the rear center seat belt, the buckle with the CENTER mark must be used.
Information If you are not able to pull out the safety belt from the retractor, firmly pull the belt out and release it. After release, you will be able to pull the belt out smoothly.
WARNING Make sure that the seatback is locked in place when using the rear center seat belt. If not, the seatback may move when there is a sudden stop or collision, which could result in serious injury.
Stowing the rear seat belt
OTM030022
The rear seat belt buckles can be stowed in the pocket between the rear seatback and cushion when not in use.
Rear seat
OTM030024
Routing the seat belt webbing through the rear seat belt guides will help keep the belts from being trapped behind or under the seats. After inserting the seat belt, tighten the belt webbing by pulling it up.
CAUTION When using the seat belt, use it after taking it out of the guides. If you pull the seat belt when it is stored in the guides, it may damage the guides and/or belt webbing.
03
3-29
Pre-tensioner seat belt
OTL035053
Your vehicle is equipped with drivers and front passengers Pre-tensioner Seat Belts(Retractor Pretensioner and Emergency Fastening Device System). The purpose of the pre-tensioner is to make sure the seat belts fit tightly against the occupants body in certain frontal or side collision(s). The Emergency Fastening Device System may be activated in certain crashes where the frontal collision(s) is severe enough, together with the air bags.
When the vehicle stops suddenly, or if the occupant tries to lean forward too quickly, the seat belt retractor will lock into position. In certain frontal or side collision(s), the pre-tensioner will activate and pull the seat belt into tighter contact against the occupants body.
(1) Retractor Pretensioner The purpose of the retractor pre- tensioner is to make sure that the shoulder belts fit in tightly against the occupants upper body in certain frontal or side collision(s). (2) Emergency Fastening Device System The purpose of the Emergency Fastening Device System is to make sure that the pelvis belts fit in tightly against the occupants lower body in certain frontal collision(s).
If the system senses excessive tension on the driver or passengers seat belt when the pre-tensioner system activates, the load limiter inside the retractor pre-tensioner will release some of the pressure on the affected seat belt.
Seats & Safety System
3-30
WARNING Always wear your seat belt and sit
properly in your seat. Do not use the seat belt if it is loose
or twisted. A loose or twisted seat belt will not protect you properly in an accident.
Do not place anything near the buckle. This may adversely affect the buckle and cause it to function improperly.
Always replace your pre-tensioners after activation or an accident.
NEVER inspect, service, repair or replace the pre-tensioners yourself. We recommend that you have the pre-tensioners inspected, serviced, repaired or replaced by an authorized HYUNDAI dealer.
Do not hit the seat belt assemblies.
WARNING Do not touch the pre-tensioner seat belt assemblies for several minutes after they have been activated. When the pre-tensioner seat belt mechanism deploys during a collision, the pre- tensioner can become hot and can burn you.
CAUTION Body work on the front area of the vehicle may damage the pre-tensioner seat belt system. Therefore, we recommend the system to be serviced by an authorized HYUNDAI dealer.
OLMB033040
The Pre-Tensioner Seat Belt System consists mainly of the following components. Their locations are shown in the illustration above: (1) SRS air bag warning light (2) Retractor pre-tensioner (3) SRS control module (4) Emergency fastening device
03
3-31
NOTICE The sensor that activates the SRS control module is connected with the pretensioner seat belts. The SRS air bag warning light on the instrument cluster will illuminate for approximately 3~6 seconds after the Engine Start/Stop button is in the ON position, and then it should turn off. If the pre-tensioner is not working properly, the warning light will illuminate even if the SRS air bag is not malfunctioning. If the warning light does not illuminate, stays illuminated or illuminates when the vehicle is being driven, we recommend the pre- tensioner seat belts and/or SRS control module be inspected by an authorized HYUNDAI dealer as soon as possible.
Information Pre-tensioner seat belts may be
activated in certain frontal or side collisions or rollover situations (if equipped with rollover sensor).
When the pre-tensioner seat belts are activated, a loud noise may be heard and fine dust, which may appear to be smoke, may be visible in the passenger compartment. These are normal operating conditions and are not hazardous.
Although it is non-toxic, the fine dust may cause skin irritation and should not be inhaled for prolonged periods. Wash all exposed skin areas thoroughly after an accident in which the pre- tensioner seat belts were activated.
Additional seat belt safety precautions Seat belt use during pregnancy The seat belt should always be used during pregnancy. The best way to protect your unborn child is to protect yourself by always wearing the seat belt. Pregnant women should always wear a lap-shoulder seat belt. Place the shoulder belt across your chest, routed between your breasts and away from your neck. Place the lap belt below your belly so that it fits SNUGLY across your hips and pelvic bone, under the rounded part of the belly.
WARNING To reduce the risk of serious injury or death to an unborn child during an accident, pregnant women should NEVER place the lap portion of the seat belt above or over the area of the abdomen where the unborn child is located.
Seat belt use and children Infant and small children Most countries have Child Restraint System laws which require children to travel in approved Child Restraint System devices, including booster seats. The age at which seat belts can be used instead of Child Restraint System differs among countries, so you should be aware of the specific requirements in your country, and where you are travelling. Infant and Child Restraint System must be properly placed and installed in a rear seat. For more information refer to the Child Restraint Systems section in this chapter.
Seats & Safety System
3-32
WARNING ALWAYS properly restrain infants and small children in a Child Restraint System appropriate for the childs height and weight. To reduce the risk of serious injury or death to a child and other passengers, NEVER hold a child in your lap or arms when the vehicle is moving. The violent forces created during an accident will tear the child from your arms and throw the child against the interior of the vehicle.
Small children are best protected from injury in an accident when properly restrained in the rear seat by a Child Restraint System that meets the requirements of the Safety Standards of your country. Before buying any Child Restraint System, make sure that it has a label certifying that it meets Safety Standard of your country. The Child Restraint System must be appropriate for your childs height and weight. Check the label on the Child Restraint System for this information. Refer to Child Restraint Systems section in this chapter.
Larger children Children under age 13 and who are too large for a booster seat should always occupy the rear seat and use the available lap/shoulder belts. A seat belt should lie across the upper thighs and be snug across the shoulder and chest to restrain the child safely. Check belt fit periodically. A childs squirming could put the belt out of position. In the event of an accident, children are afforded the best safety restrained by a proper Child Restraint System in the rear seats. If a larger child over age 13 must be seated in the front seat, the child must be securely restrained by the available lap/shoulder belt and the seat should be placed in the rearmost position. If the shoulder belt portion slightly touches the childs neck or face, try placing the child closer to the center of the vehicle. If the shoulder belt still touches their face or neck, they need to be returned to an appropriate booster seat in the rear seat.
WARNING Always make sure larger childrens
seat belts are worn and properly adjusted.
NEVER allow the shoulder belt to contact the childs neck or face.
Do not allow more than one child to use a single seat belt.
Seat belt use and injured people A seat belt should be used when an injured person is being transported. Consult a physician for specific recommendations.
03
3-33
One person per belt Two people (including children) should never attempt to use a single seat belt. This could increase the severity of injuries in case of an accident.
Do not lie down Sitting in a reclined position when the vehicle is in motion can be dangerous. Even when buckled up, the protections of your restraint system (seat belts and/or air bags) is greatly reduced by reclining your seatback. Seat belts must be snug against your hips and chest to work properly. During an accident, you could be thrown into the seat belt, causing neck or other injuries. The more the seat back is reclined, the greater the chance for the passengers hips to slide under the lap belt or the passengers neck to strike the shoulder belt.
WARNING NEVER ride with a reclined seatback
when the vehicle is moving. Riding with a reclined seatback
increases your chance of serious or fatal injuries in the event of a collision or sudden stop.
Driver and passengers should always sit well back in their seats, properly belted, and with the seatbacks upright.
Care of seat belts Seat belt systems should never be disassembled or modified. In addition, care should be taken to assure that seat belts and belt hardware are not damaged by seat hinges, doors or other abuse.
Periodic inspection All seat belts should be inspected periodically for wear or damage of any kind. Any damaged parts should be replaced as soon as possible.
Keep belts clean and dry Seat belts should be kept clean and dry. If belts become dirty, they can be cleaned by using a mild soap solution and warm water. Bleach, dye, strong detergents or abrasives should not be used because they may damage and weaken the fabric.
When to replace seat belts The entire seat belt assembly or assemblies should be replaced if the vehicle has been involved in an accident. This should be done even if no damage is visible. We recommend that you consult an authorized HYUNDAI dealer.
Seats & Safety System
3-34
Children Always in the Rear
WARNING Always properly restrain children in the vehicle. Children of all ages are safer when restrained in the rear seat. A child riding in the front passenger seat can be forcefully struck by an inflating air bag resulting in SERIOUS INJURY or DEATH.
Children under age 13 should always ride in the rear seats and must always be properly restrained to minimize the risk of injury in an accident, sudden stop or sudden maneuver. According to accident statistics, children are safer when properly restrained in the rear seats than in the front seat. Even with air bags, children can be seriously injured or killed. Children too large for a Child Restraint System must use the seat belts provided. All 50 states have child restraint laws which require children to travel in approved Child Restraint Systems. The laws governing the age or height/ weight restrictions at which seat belts can be used instead of Child Restraint System differs among states, so you should be aware of the specific requirements in your country, and where you are travelling. Child Restraint Systems must be properly placed and installed in the rear seat. You must use a commercially available Child Restraint System that meets the requirements of the Federal Motor Vehicle Safety Standards (FMVSS 213). Child Restraint Systems are generally designed to be secured in a vehicle seat by lap belt portion of a lap/shoulder belt, or by a LATCH system in the rear seats of the vehicle.
Child Restraint System (CRS) Infants and younger children must be restrained in an appropriate rearward- facing or forward-facing CRS that has first been properly secured to the seat of the vehicle. Read and comply with the instructions for installation and use provided by the manufacturer of the Child Restraint System.
WARNING An improperly secured child restraint can increase the risk of SERIOUS INJURY or DEATH in an accident. Always take the following precautions when using a Child Restraint System: NEVER install a child or infant
restraint in the front passenger's seat.
Always properly secure the child restraint to a rear seat of the vehicle.
Always follow the child restraint system manufacturer's instructions for installation and use.
Always properly restrain your child in the child restraint.
If the vehicle head restraint prevents proper installation of a child seat (as described in the child restraint system manual), the head restraint of the respective seating position shall be readjusted or entirely removed.
Do not use an infant carrier or a child safety seat that "hooks" over a seatback, it may not provide adequate protection in an accident.
After an accident, have an authorized HYUNDAI dealer check the child restraint system, seat belts, tether anchors and lower anchors.
ChILD REsTRAInT sYsTEm (CRs)
03
3-35
Selecting a Child Restraint System (CRS) When selecting a Child Restraint System for your child, always: Make sure the Child Restraint System
has a label certifying that it meets applicable Federal Motor Vehicle Safety Standards (FMVSS 213).
Select a Child Restraint System based on your childs height and weight. The required label or the instructions for use typically provide this information.
Select a Child Restraint System that fits the vehicle seating position where it will be used.
Read and comply with the warnings and instructions for installation and use provided with the Child Restraint System.
Child Restraint System types There are three main types of Child Restraint Systems: rearward-facing, forward-facing and booster Child Restraint Systems. They are classified according to the childs age, height and weight.
OTM030026
Rearward-facing Child Restraint System A rearward-facing Child Restraint System provides restraint with the seating surface against the back of the child. The harness system holds the child in place, and in an accident, acts to keep the child positioned in the Child Restraint Systems and reduce the stress to the fragile neck and spinal cord. All children under the age of one year must always ride in a rearward-facing Child Restraint System. Convertible and 3-in-1 Child Restraint Systems typically have higher height and weight limits for the rearward-facing position, allowing you to keep your child rearward-facing for a longer period of time. Keep using Child Restraint Systems in the rearward-facing position as long as children fit within the height and weight limits allowed by the Child Restraint Systems manufacturer. Continue using Child Restraint Systems in the rearward-facing position as long as children fit within the height and weight limits allowed by the Child Restraint Systems manufacturer. It's the best way to keep them safe. Once your child has outgrown the rearward-facing Child Restraint System, your child is ready for a forward-facing Child Restraint System with a harness.
Seats & Safety System
3-36
WARNING NEVER install a child or infant restraint in the front passenger's seat. Placing a rearward-facing child restraint in the front seat can result in SERIOUS INJURY or DEATH if the child restraint is struck by an inflating air bag.
OTM030062
Forward-facing Child Restraint System A forward-facing Child Restraint System provides restraint for the childs body with a harness. Keep children in a forward-facing Child Restraint System with a harness until they reach the top height or weight limit allowed by your Child Restraint Systems manufacturer. Once your child outgrows the forward- facing Child Restraint System, your child is ready for a booster seat.
Booster seats A booster seat is a Child Restraint System designed to improve the fit of the vehicles seat belt system. A booster seat positions the seat belt so that it fits properly over the stronger parts of your childs body. Keep your children in booster seats until they are big enough to fit in a seat belt properly. For a seat belt to fit properly, the lap belt must lie comfortable across the upper thighs, not the stomach. The shoulder belt should lie comfortable across the shoulder and chest and not across the neck or face. Children under age 13 must always be properly restrained to minimize the risk of injury in an accident, sudden stop or sudden maneuver.
03
3-37
Installing a Child Restraint System (CRS)
WARNING Before installing your Child Restraint System always: Read and follow the instructions provided by the manufacturer of the Child Restraint System. Failure to follow all warnings and instructions could increase the risk of the SERIOUS INJURY or DEATH if an accident occurs.
WARNING If the vehicle head restraint prevents proper installation of a Child Restraint System, the head restraint of the respective seating position shall be readjusted or entirely removed.
After selecting a proper Child Restraint System for your child and checking that the Child Restraint System fits properly on the seating position, there are three general steps for a proper installation: Properly secure the Child Restraint
System to the vehicle. All Child Restraint Systems must be secured to the vehicle with the lap belt or lap part of a lap/shoulder part of a lap/shoulder belt or with the LATCH system.
Make sure the Child Restraint System is firmly secured. After installing a Child Restraint System to the vehicle, push and pull the seat forward and from side-to-side to verify that it is securely attached to the seat. A Child Restraint System secured with a seat belt should be installed as firmly as possible. However, some side-to-side movement can be expected. When installing a Child Restraint System, adjust the vehicle seat and seatback (up and down, forward and rearward) so that your child fits in the Child Restraint System in a comfortable manner.
Secure the child in the Child Restraint System. Make sure the child is properly strapped in the Child Restraint System according to the Child Restraint System manufacturers instructions.
CAUTION A Child Restraint System in a closed vehicle can become very hot. To prevent burns, check the seating surface and buckles before placing your child in the Child Restraint System.
Seats & Safety System
3-38
Lower Anchors and Tether for Children (LATCH System) The LATCH system holds a Child Restraint System during driving and in an accident. This system is designed to make installation of the Child Restraint System easier and reduce the possibility of improperly installing your Child Restraint System. The LATCH system uses anchors in the vehicle and attachments on the Child Restraint System. The LATCH system eliminates the need to use seat belts to secure the Child Restraint System to the rear seats. Lower anchors are metal bars built into the vehicle. There are two lower anchors for each LATCH seating position that will accommodate a Child Restraint System with lower attachments. To use the LATCH system in your vehicle, you must have a Child Restraint System with LATCH attachments. The Child Restraint System manufacturer will provide you with instructions on how to use the Child Restraint System with its attachments for the LATCH anchorages.
OOSEV038012
LATCH anchors have been provided in the left and right outboard rear seating positions. Their locations are shown in the illustration. There are not LATCH anchors provided for the center rear seating position.
WARNING Do not attempt to install a Child Restraint System using LATCH anchors in the rear center seating position. There are no LATCH anchors provided for this seat. Using the outboard seat anchors can damage the anchors which may break or fail in a collision resulting in serious injury or death.
03
3-39
Rear passenger seat
OTM030012
[A] : Lower Anchor Position Indicator (Type A- ,Type B- ),
[B] : Lower Anchor
The lower anchor position indicator symbols are located on the left and right rear seat backs to identify the position of the lower anchors in your vehicle (see arrows in illustration). The LATCH anchors are located between the seatback and the seat cushion of the rear seat left and right outboard seating positions.
WARNING Before installing the Child Restraint System, make sure that there are no objects (e.g. toy, pen, wire) around the lower anchor area. Those objects may damage either the seat belt system or the Child Restraint System during the installment procedure. If necessary, have the vehicle inspected by an authorized HYUNDAI dealer.
Securing a Child Restraint System with the LATCH Anchors System To install a LATCH-compatible Child Restraint System in either of the rear outboard seating positions: 1. Move the seat belt buckle away from
the lower anchors. 2. Move any other objects away from
the anchorages that could prevent a secure connection between the Child Restraint System and the lower anchors.
3. Place the Child Restraint System on the vehicle seat, then attach the seat to the lower anchors according to the instructions provided by the Child Restraint System manufacturer.
4. Follow the instructions of the Child Restraint Systems manufacturer for proper installation and connection of the lower attachments on the Child Restraint System to the lower anchors.
Seats & Safety System
3-40
WARNING Take the following precautions when using the LATCH system: Read and follow all installation
instructions provided with your Child Restraint System.
To prevent the child from reaching and taking hold of unretracted seat belts, buckle all unused rear seat belts and retract the seat belt webbing behind the child. Children can be strangled if a shoulder belt becomes wrapped around their neck and the seat belt tightens.
NEVER attach more than one Child Restraint System to a single anchorage. This could cause the anchor or attachment to come loose or break.
Always have the LATCH system inspected by your dealer after an accident. An accident can damage the LATCH system and may not properly secure the Child Restraint System.
NOTICE The recommended weight for the LATCH system is under 65 lb. (30 kg). How to determine an appropriate child restraint weight: Child weight + Child restraint weight < 65 lb. (30kg)
Securing a Child Restraint System seat with Tether Anchor system
OTMA038032
First secure the child restraint with the LATCH lower anchors or the seat belt. If the child restraint manufacturer recommends that the top tether strap be attached, attach and tighten the top tether strap to the top tether strap anchor. Child restraint hook holders are located on the rear of the seatbacks.
03
3-41
OTM030027
To install the tether anchor: 1. Route the Child Restraint System
top-tether strap over the seatback. Route the tether strap under the head restraint and between the head restraint posts, or route the tether strap over the top of the vehicle seatback. Make sure the strap is not twisted.
2. Connect the tether strap hook to the tether anchor, then tighten the top-tether strap according to the instructions of your Child Restraint Systems manufacturer to firmly attach the Child Restraint System to the seat.
3. Check that the Child Restraint System is securely attached to the seat by pushing and pulling the seat forward- and-back and side-to-side.
WARNING Take the following precautions when installing the top-tether: Read and follow all installation
instructions provided with your Child Restraint System.
NEVER attach more than one Child Restraint System to a single tether anchor. This could cause the anchorage or attachment to come loose or break.
Do not attach the tether strap to anything other than the correct top-tether anchor. It may not work properly if attached to something else.
Child Restraint System anchors are designed to withstand only those loads imposed by correctly fitted Child Restraint System. Under no circumstances are they to be used for adult seat belts or harnesses or for attaching other items or equipment to the vehicle.
Seats & Safety System
3-42
Securing a Child Restraint System with a lap/shoulder belt
WARNING ALWAYS place a rearward-facing Child Restraint System in the rear seat of the vehicle. Placing a rearward-facing child restraint in the front seat can result in serious injury or death if the Child Restraint System is struck by an inflating air bag.
When not using the LATCH system, all Child Restraint Systems must be secured to a rear seat with the lap part of a lap/ shoulder belt.
OHI038145
Automatic locking mode Since all passenger seat belts move freely under normal conditions and only lock under extreme or emergency conditions (emergency locking mode), you must manually pull the seat belt all the way out to shift the retractor to the "Automatic Locking" mode to secure a Child Restraint System. The "Automatic Locking" mode will help prevent the normal movement of the child in the vehicle from causing the seat belt to loosen and compromise the Child Restraint System. To secure a Child Restraint System, use the following procedure. To install a Child Restraint System on the rear seats, do the following: 1. Place the Child Restraint System on a
rear seat and route the lap/shoulder belt around or through the Child Restraint System, following the Child Restraint System manufacturers instructions. Make sure the seat belt webbing is not twisted.
Information When using the rear center seat belt, you should also refer to the "Rear Seat Belt Passenger's 3-point system" section in this chapter.
03
3-43
OHI038146
2. Fasten the lap/shoulder belt latch into the buckle. Listen for the distinct click sound.
Information Position the release button so that it is easy to access in case of an emergency.
OHI038147
3. Pull the shoulder portion of the seat belt all the way out. When the shoulder portion of the seat belt is fully extended, it will shift the retractor to the "Automatic Locking" (child restraint) mode.
OHI038148
4. Slowly allow the shoulder portion of the seat belt to retract and listen for an audible "clicking" or "ratcheting" sound. This indicates that the retractor is in the "Automatic Locking" mode. If no distinct sound is heard, repeat steps 3 and 4.
5. Remove as much slack from the belt as possible by pushing down on the Child Restraint System while feeding the shoulder belt back into the retractor.
6. Push and pull on the Child Restraint System to confirm that the seat belt is holding it firmly in place. If it is not, release the seat belt and repeat steps 2 through 6.
7. Double check that the retractor is in the "Automatic Locking" mode by attempting to pull more of the seat belt out of the retractor. If you cannot, the retractor is in the "Automatic Locking" mode.
If your Child Restraint System manufacturer instructs or recommends you to use a tether anchor with the lap/ shoulder belt, refer to the previous pages for more information.
Seats & Safety System
3-44
Information When the seat belt is allowed to retract to its fully stowed position, the retractor will automatically switch from the Automatic Locking mode to the emergency lock mode for normal adult usage.
WARNING If the retractor is not in the Automatic Locking mode, the child restraint can move when your vehicle turns or stops suddenly. A child can be seriously injured or killed if the child restraint is not properly anchored in the car, including manually pulling the seat belt all the way out to shift the retractor to the Automatic Locking mode.
To remove the Child Restraint System, press the release button on the buckle and then pull the lap/shoulder belt out of the Child Restraint System and allow the seat belt to retract fully.
WARNING If a child restraint is installed in the second row center seat, move the second row seat far back as possible, to minimize contact with the front center air bag.
3-45
03
The actual air bags in the vehicle may differ from the illustration.
OTM038049
AIR bAg - sUppLEmEnTAL REsTRAInT sYsTEm
1. Drivers front air bag 2. Passengers front air bag 3. Side air bag 4. Curtain air bag
Seats & Safety System
3-46
The vehicles are equipped with a Supplemental Air Bag System for the drivers seat and front passengers seats. The front air bags are designed to supplement the three-point seat belts. For these air bags to provide protection, the seat belts must be worn at all times when driving. You can be severely injured or killed in an accident if you are not wearing a seat belt. Air bags are designed to supplement seat belts, but do not replace them. Also, air bags are not designed to deploy in every collision. In some accidents, the seat belts are the only restraint protecting you.
WARNING AIR BAG SAFETY PRECAUTIONS ALWAYS use seat belts Child Restraint Systems - every trip, every time, everyone! Even with air bags, you can be seriously injured or killed in a collision if you are improperly belted or not wearing your seat belt when the air bag inflates. NEVER place a child in any Child Restraint System or booster seat in the front passenger seat, unless the air bag is deactivated. An inflating air bag could forcefully strike the infant or child causing serious or fatal injuries. ABC - Always Buckle Children under age 13 in the back seat. It is the safest place for children of any age to ride. If a child age 13 or older must be seated in the front seat, he or she must be properly belted and the seat should be moved as far back as possible. All occupants should sit upright with the seatback in an upright position, centered on the seat cushion with their seat belt on, legs comfortably extended and their feet on the floor until the vehicle is parked and the vehicle is turned off. If an occupant is out of position during an accident, the rapidly deploying air bag may forcefully contact the occupant causing serious or fatal injuries. You and your passengers should never sit or lean unnecessarily close to the air bags or lean against the door or center console. Move your seat as far back as possible from front air bags, while still maintaining control of the vehicle. The U.S. National Highway Traffic Safety Administration (NHTSA) recommends that drivers allow at least 10 inches (25 cm) between the center of the steering wheel and the chest.
03
3-47
Where are the air bags? Drivers and passengers front air bags Drivers front air bag
OTM030006
Passengers front air bag
OTM030007
Your vehicle is equipped with a Supplemental Restraint System (SRS) and lap/shoulder belts at both the driver and passenger seating positions. The SRS consists of air bags which are located in the center of the steering wheel and the passengers side front panel pad above the glove box. The air bags are labeled with the letters AIR BAG embossed on the pad covers. The purpose of the SRS is to provide the vehicles driver and front passengers with additional protection than that offered by the seat belt system alone in case of a frontal impact of sufficient severity. The SRS uses sensors to gather information about the drivers and front passenger's seat belt usage and impact severity.
The seat belt buckle sensors determine if the driver and front passenger's seat belts are fastened. These sensors provide the ability to control the SRS deployment based on whether or not the seat belts are fastened, and how severe the impact is. The advanced SRS offers the ability to control the air bag inflation within two levels. A first stage level is provided for moderate-severity impacts. A second stage level is provided for more severe impacts. According to the impact severity, and seat belt usage, the SRS Control Module (SRSCM) controls the air bag inflation. Failure to properly wear seat belts can increase the risk or severity of injury in an accident.
WARNING To reduce the risk of serious injury or death from inflating front air bags, take the following precautions: Seat belts must be worn at all times
to help keep occupants positioned properly.
Move your seat as far back as possible from front air bags, while still maintaining control of the vehicle.
Never lean against the door or center console.
Do not allow the front passenger to place their feet or legs on the dashboard.
No objects (such as crash pad cover, mobile phone holder, cup holder, perfume or stickers) should be placed over or near the air bag modules on the steering wheel, instrument panel, windshield glass, and the front passengers panel above the glove box. Such objects could cause harm if the vehicle is in a crash severe enough to cause the air bags to deploy.
Do not attach any objects on the front windshield and inside mirror.
Seats & Safety System
3-48
Side air bags Side air bag
OTM030029
OTM030030
Your vehicle is equipped with a side air bag in each front seat. The purpose of the air bag is to provide the vehicles driver and the front passenger with additional protection than that offered by the seat belt alone. The side air bags are designed to deploy during certain side impact collisions, depending on the crash severity, angle, speed and point of impact. The side air bags on both sides of the vehicle are designed to deploy when a rollover is detected by a rollover sensor. (if equipped with rollover sensor) The side air bags are not designed to deploy in all side impact or rollover situations.
WARNING To reduce the risk of serious injury or death from an inflating side air bag and front center air bag, take the following precautions: Seat belts must be worn at all times
to help keep occupants positioned properly.
Do not allow passengers to lean their heads or bodies onto doors, put their arms on the doors, stretch their arms out of the window, or place objects between the doors and seats.
Hold the steering wheel at the 9 oclock and 3 oclock positions, to minimize the risk of injuries to your hands and arms.
Do not use any accessory seat covers. This could reduce or prevent the effectiveness of the system.
Do not hang other objects except clothes. In an accident it may cause vehicle damage or personal injury especially when air bag is inflated.
Do not place any objects over the air bag or between the air bag and yourself. Also, do not attach any objects around the area the air bag inflates such as the door, side door glass, front and rear pillar.
Do not place any objects between the door and the seat. They may become dangerous projectiles if the side air bag inflates.
Do not install any accessories on the side or near the side air bags.
Do not cause impact to the doors when the Engine Start/Stop button is in the ON or START position as this may cause the side air bags to inflate.
If the seat or seat cover is damaged, we recommend that the system be serviced by an authorized HYUNDAI dealer.
03
3-49
Curtain air bags
OTM030031
OTM030032
Curtain air bags are located along both sides of the roof rails above the front and rear doors. They are designed to help protect the heads of the front seat occupants and the rear outboard seat occupants in certain side impact collisions. The curtain air bags are designed to deploy during certain side impact collisions, depending on the crash severity, angle, speed and impact.
For vehicles equipped with a rollover sensor the side and/or curtain air bags and pre-tensioners on both sides of the vehicle may deploy if a rollover or possible rollover is detected. The curtain air bags are not designed to deploy in all side impact or rollover situations.
WARNING To reduce the risk of serious injury or death from an inflating curtain air bag, take the following precautions: All seat occupants must wear
seat belts at all times to help keep occupants positioned properly.
Properly secure Child Restraint System as far away from the door as possible.
Do not place any objects over the air bag. Also, do not attach any objects around the area the air bag inflates such as the door, side door glass, front and rear pillar, roof side rail.
Do not hang other objects except clothes, especially hard or breakable objects. In an accident, it may cause vehicle damage or personal injury.
Do not allow passengers to lean their heads or bodies onto doors, put their arms on the doors, stretch their arms out of the window, or place objects between the doors and seats.
Do not open or repair the side curtain air bags.
Seats & Safety System
3-50
How does the air bags system operate?
OTMH030008N
The SRS consists of the following components: (1) Driver's front air bag module (2) Passenger's front air bag module (3) Side air bag modules (4) Curtain air bag modules (5) Retractor pre-tensioner (6) Air bag warning light (7) SRS control module (SRSCM)/
Rollover sensor (8) Front impact sensors (9) Side impact sensors (10) Side pressure sensors (11) Seat belt buckle sensor (12) Emergency fastening device system (13) Occupant classification system The SRSCM continually monitors all SRS components while the ignition switch is ON to determine if a crash impact is severe enough to require air bag deployment or pre-tensioner seat belt deployment.
SRS warning light
The SRS (Supplemental Restraint System) air bag warning light on the instrument panel displays the air bag symbol depicted in the illustration. The system checks the air bag electrical system for malfunctions. The light indicates that there is a potential problem with your air bag system, which could include your side and/or curtain air bags used for rollover protection (if equipped with rollover sensor).
WARNING If your SRS malfunctions, the air bag may not inflate properly during an accident increasing the risk of serious injury or death. If any of the following conditions occur, your SRS is malfunctioning: The light does not turn on for
approximately three to six seconds when the Engine Start/Stop button is in the ON position.
The light stays on after illuminating for approximately three to six seconds.
The light comes on while the vehicle is in motion.
The light blinks when the engine is running.
We recommend that an authorized HYUNDAI dealer inspect the SRS as soon as possible if any of these conditions occur.
03
3-51
During a moderate to severe frontal collision, sensors will detect the vehicles rapid deceleration. If the rate of deceleration is high enough, the control unit will inflate the front air bags, at the time and with the force needed. The front air bags help protect the driver and front passenger by responding to frontal impacts in which seat belts alone cannot provide adequate restraint. When needed, the side air bags help provide protection in the event of a side impact or rollover by supporting the side upper body area. Air bags are activated (able to
inflate if necessary) only when the Engine Start/Stop button is in the ON or START position, and it can be activated within about 3 minutes after the engine is turned off.
Air bags inflate in the event of certain frontal or side collisions to help protect the occupants from serious physical injury.
There is no single speed at which the air bags will inflate. Generally, air bags are designed to inflate based upon the severity of a collision and its direction. These two factors determine whether the sensors produce an electronic deployment/inflation signal.
The front air bags will completely inflate and deflate in an instant. It is virtually impossible for you to see the air bags inflate during an accident. It is much more likely that you will simply see the deflated air bags hanging out of their storage compartments after the collision.
In addition to inflating in serious side collisions, vehicles equipped with a rollover sensor, side and/or curtain air bags will inflate if the sensing system detects a rollover. When a rollover is detected, curtain air bags will remain inflated longer to help provide protection from ejection, especially when used in conjunction with the seat belts. (if equipped with a rollover sensor)
To help provide protection, the air bags must inflate rapidly. The speed of air bag inflation is a consequence of extremely short time in which to inflate the air bag between the occupant and the vehicle structures before the occupant impacts those structures. This speed of inflation reduces the risk of serious or lifethreatening injuries and is thus a necessary part of air bag design. However, the rapid air bag inflation can also cause injuries which can include facial abrasions, bruises and broken bones because the inflation speed also causes the air bags to expand with a great deal of force.
There are even circumstances under which contact with the air bag can cause fatal injuries, especially if the occupant is positioned excessively close to the air bag.
You can take steps to reduce the risk of being injured by an inflating air bag. The greatest risk is sitting too close to the air bag. An air bag needs about 10 in. (25 cm) of space to inflate. NHTSA recommends that drivers allow at least 10 in. (25 cm) between the center of the steering wheel and the chest.
Seats & Safety System
3-52
WARNING To reduce the risk of serious injury or death from an inflating air bag, take the following precautions: NEVER place a child restraint in the
front passenger seat. Always properly restrain children under age 13 in the rear seats of the vehicle.
Adjust the front passengers and driver's seats as far to the rear as possible while allowing you to maintain full control of the vehicle.
Hold the steering wheel with hands at the 9 o'clock and 3 o'clock positions.
Never place anything or anyone between the air bag and the seat occupant.
Do not allow the front passenger to place their feet or legs on the dashboard.
Drivers front air bag (1)
ODN8039077L
When the SRSCM detects a sufficiently severe impact to the front of the vehicle, it will automatically deploy the front air bags.
Drivers front air bag (2)
ODN8039078L
Upon deployment, tear seams molded directly into the pad covers will separate under pressure from the expansion of the air bags. Further opening of the covers allows full inflation of the air bags. A fully inflated air bag, in combination with a properly worn seat belt, slows the drivers or the front passengers forward motion, reducing the risk of head and chest injury.
03
3-53
Drivers front air bag (3)
ODN8039079L
Passengers front air bag
ODN8039080L
After complete inflation, the air bag immediately starts deflating, enabling the driver to maintain forward visibility and the ability to steer or operate other controls.
WARNING To prevent objects from becoming dangerous projectiles when the passengers air bag inflates: Do not install or place any objects
(drink holder, CD holder, stickers, etc.) on the front passengers panel above the glove box where the passengers air bag is located.
Do not install a container of liquid air freshener near the instrument cluster or on the instrument panel surface.
What to expect after an air bag inflates After a frontal or side air bag inflates, it will deflate very quickly. Air bag inflation will not prevent the driver from seeing out of the windshield or being able to steer. Curtain air bags may remain partially inflated for some time after they deploy.
WARNING After an air bag inflates, take the following precautions: Open your windows and doors as
soon as possible after impact to reduce prolonged exposure to the smoke and powder released by the inflating air bag.
Do not touch the air bag storage areas internal components immediately after an air bag has inflated. The parts that come into contact with an inflating air bag may be very hot.
Always wash exposed skin areas thoroughly with cold water and mild soap.
We recommend that an authorized HYUNDAI dealer replace the air bag immediately after deployment. Air bags are designed to be used only once.
Seats & Safety System
3-54
Noise and smoke from inflating air bag When the air bags inflate, they make a loud noise and may produce smoke and powder in the air inside of the vehicle. This is normal and is a result of the ignition of the air bag inflator. After the air bag inflates, you may feel substantial discomfort in breathing because of the contact of your chest with both the seat belt and the air bag, as well as from breathing the smoke and powder. The powder may aggravate asthma for some people. If you experience breathing problems after an air bag deployment, seek medical attention immediately. Though the smoke and powder are nontoxic, they may cause irritation to the skin, eyes, nose, throat, etc. If this is the case, wash and rinse with cold water immediately and seek medical attention if the symptoms persist.
Occupant Classification System (OCS)
OTMA030003
Your vehicle is equipped with an Occupant Classification System (OCS) in the front passengers seat.
03
3-55
Main components of the Occupant Classification System A detection device located within the
front passenger seat cushion. Electronic system to determine
whether the passenger air bag systems should be activated or deactivated.
An indicator light located on the instrument panel which illuminates the words PASSENGER AIR BAG OFF indicating the front passenger air bag system is deactivated.
The instrument panel air bag indicator light is interconnected with the OCS.
The OCS is designed to help detect the presence of a properly-seated front passenger and determine if the passengers front air bag should be enabled (may inflate) or not. The purpose is to help reduce the risk of injury or death from an inflating air bag to certain front passenger seat occupants, such as children, by requiring the air bag to be automatically turned OFF. For example, if a child restraint of the type specified in the regulations is on the seat, the occupant classification sensor can detect it and cause the air bag to turn OFF. Front passenger seat adult occupants who are properly seated and wearing the seat belt properly, should not cause the passenger air bag to be automatically turned OFF. For smaller adults it may turn OFF, however, if the occupant does not sit in the seat properly (for example, by not sitting upright, by sitting on the edge of the seat, or by otherwise being out of position), this could cause the sensor to turn the air bag OFF.
You will find the PASSENGER AIR BAG OFF indicator on the overhead console panel. This system detects the conditions 1-4 in the following table and activates or deactivates the front passenger air bag based on these conditions. Always be sure that you and all vehicle occupants are seated properly and wearing the seat belt properly for the most effective protection by the air bag and the seat belt. The OCS may not function properly if the passenger takes actions which can affect the classification system. These include: Failing to sit in an upright position. Leaning against the door or center
console. Sitting towards the sides of the front
of the seat. Putting their legs on the dashboard or
resting them on other locations which reduce the passenger weight on the front seat.
Wearing the seat belt improperly. Reclining the seatback. Wearing thick clothes like ski wear or
hip protection wear. Putting an additional thick cushion on
the seat. Putting electrical devices (e.g.
notebook, satellite radio) on the seat with inverter charging.
Seats & Safety System
3-56
Condition and operation in the front passenger Occupant Classification System
Condition detected by the occupant classification system
Indicator/Warning light Devices
PASSENGER AIR BAG OFF indicator light
SRS warning light
Front passenger air
bag
1. Adult*1 Off Off Activated
2. Infant*2 or child restraint system with 12 months old *3 *4 On Off Deactivated
3. Unoccupied On Off Deactivated
4. Malfunction in the system Off On Activated
*1 : The system judges a person of adult size as an adult. When a smaller adult sits in the front passenger seat, the system may recognize him/her as a child depending on his/her physique and posture.
*2 : Do not allow children to ride in the front passenger seat. When a larger child who has outgrown a child restraint system sits in the front passenger seat, the system may recognize him/her as an adult depending upon his/her physique or sitting position.
*3 : Never install a child restraint system on the front passenger seat. *4 : The PASSENGER AIR BAG OFF indicator may turn on or off when a child above 12
months to 12 years old (with or without child restraint system) sits in the front passenger seat. This is a normal condition.
03
3-57
WARNING Riding in an improper position or placing weight on the front passengers seat when it is unoccupied by a passenger adversely affects the OCS. To reduce the risk of serious injury or death:
OHI038163
NEVER put a heavy load in the front seat or seatback pocket, or hang any items on the front passenger seat.
OHI038156
NEVER place your feet on the front passenger seatback.
OHI038155
NEVER sit with your hips shifted towards the front of the seat.
OHI038157
NEVER ride with the seatback reclined when the vehicle is moving.
OHI039192N
NEVER place your feet or legs on the dashboard.
Seats & Safety System
3-58
OHI038158
NEVER lean on the door or center console or sit on one side of the front passenger seat.
OJX1039069
Do not sit on the passenger seat wearing heavily padded clothes such as ski wear and hip protector.
OJX1039070
Do not use car seat accessories such as thick blankets and cushions which cover up the car seat surface.
OJX1039071
Do not place electronic devices such as laptops, DVD player, or conductive materials such as water bottles on the passenger seat.
Do not use electronic devices such as laptops and satellite radios which use inverter chargers.
OJX1039072
If large quantity of liquid has been spilled on the passenger seat, the air bag warning light may illuminate or malfunction. Therefore, make sure the seat has been completely dried before driving the vehicle.
Do not place sharp objects on the front passenger seat. These may damage the occupant detection system, if they puncture the seat cushion.
Do not place any items under the front passenger seat. When changing or replacing the seat or seat cover, use original items only.
The OCS has been developed based on using original HYUNDAI car seats only. Altering or changing the authentic parts may result in system malfunction and increase risk of injury when in collision. Any of the above could interfere with the proper operation of the OCS sensor thereby increasing the risk of an injury in an accident.
03
3-59
OHI038118
Proper seated position for OCS If the PASSENGER AIR BAG OFF indicator is on when an adult is seated in the front passenger seat, place the Engine Start/Stop button in the OFF position and ask the passenger to sit properly (sitting upright with the seat back in an upright position, centered on the seat cushion with their seat belt on, legs comfortably extended and their feet on the floor). Restart the engine and have the person remain in that position. This will allow the system to detect the person and to enable the passenger air bag. If the PASSENGER AIR BAG OFF indicator is still on, ask the passenger to move to the rear seat.
WARNING NEVER allow an adult passenger to ride in the front passenger seat when the PASSENGER AIR BAG OFF indicator is illuminated. During a collision, the air bag will not inflate if the indicator is illuminated. Have your passenger reposition themselves in the seat. If the PASSENGER AIR BAG OFF indicator remains illuminated after the passenger repositions themselves properly and the vehicle is restarted, have the passenger move to the rear seat because the air bag will not inflate.
NOTICE The PASSENGER AIR BAG OFF indicator generally illuminates for approximately 4 seconds after the Engine Start/Stop button is in the ON or START position. But, if the Engine START/STOP button is pressed to the ON or START position within 3 minutes after the engine is turned OFF, the indicator does not illuminate. If the front passenger seat is occupied, the OCS will then classify the front passenger after several more seconds.
Seats & Safety System
3-60
Do not install a Child Restraint System on the Front Passengers Seat
OHI039193N
Even though your vehicle is equipped with the OCS, never install a child restraint in the front passengers seat. An inflating air bag can forcefully strike a child or child restraint resulting in serious or fatal injury.
WARNING NEVER use a rearward facing Child Restraint on a seat protected by an ACTIVE AIRBAG in front of it, DEATH or SERIOUS INJURY to the CHILD can occur.
Why didnt my air bag go off in a collision? There are certain types of accidents in which the air bag would not be expected to provide additional protection. These include rear impacts, second or third collisions in multiple impact accidents, as well as low speed impacts. Damage to the vehicle indicates a collision energy absorption, and is not an indicator of whether or not an air bag should have inflated.
Air bag collision sensors
WARNING To reduce the risk of an air bag deploying unexpectedly and causing serious injury or death: Do not hit or allow any objects to
impact the locations where air bags or sensors are installed.
Do not perform maintenance on or around the air bag sensors. If the location or angle of the sensors is altered, the air bags may deploy when they should not or may not deploy when they should.
Installing bumper guards with non- genuine Hyundai or non-equivalent parts may adversely affect the collision and airbag deployment performance.
Press the Engine Start/Stop button to the OFF or ACC position and wait for 3 minutes when the vehicle is being towed to prevent inadvertent air bag deployment.
We recommend that all air bag repairs are conducted by an authorized HYUNDAI dealer.
3-61
03
OTM030009/OTM030010/OTM030011/OTM030035/OTM030036/OTM030037
1. SRS control module / Rollover sensor 2. Front impact sensor 3. Side impact sensor (Pressure)
4. Side impact sensor (Acceleration) 5. Side impact sensor (Acceleration)
Seats & Safety System
3-62
Air bag inflation conditions
OTM030014
Front air bags Front air bags are designed to inflate in a frontal collision depending on the severity of impact of the front collision.
OTM030013
OTM030033
Side and curtain air bags Side and curtain air bags are designed to inflate when an impact is detected by side collision sensors depending on the severity, speed or angles of impact resulting from a side impact collision. Although the drivers and front passengers air bags are designed to inflate in frontal collisions, they also may inflate in other types of collisions if the front impact sensors detect a sufficient impact. Side and curtain air bags are designed to inflate in side impact collisions, but they may inflate in other collisions if the side impact sensors detect a sufficient impact. Also, the side and curtain air bags are designed to inflate when a rollover is detected by a rollover sensor. (if equipped with rollover sensor) If the vehicle chassis is impacted by bumps or objects on unimproved roads, the air bags may deploy. Drive carefully on unimproved roads or on surfaces not designed for vehicle traffic to prevent unintended air bag deployment.
03
3-63
Air bag non-inflation conditions
OTM030015
In certain low-speed collisions the air bags may not deploy. The air bags are designed not to deploy in such cases because they may not provide benefits beyond the protection of the seat belts.
OTM030016
Front air bags are not designed to inflate in rear collisions, because occupants are moved backward by the force of the impact. In this case, inflated air bags would not provide any additional benefit.
OTM030017
Front air bags may not inflate in side impact collisions, because occupants move in the direction of the collision, and thus in side impacts, front air bag deployment would not provide additional occupant protection. However, side and curtain air bags and front center air bag may inflate depending on the severity of impact.
OTM030034
In an angled collision, the force of impact may direct the occupants in a direction where the air bags would not be able to provide any additional benefit, and thus the sensors may not deploy any air bags.
Seats & Safety System
3-64
OTM030018
Just before impact, drivers often brake heavily. Such heavy braking lowers the front portion of the vehicle causing it to ride under a vehicle with a higher ground clearance. Air bags may not inflate in this underride situation because deceleration forces that are detected by sensors may be significantly reduced by such underride collisions.
OTM030041
Front air bags may not inflate in rollover accidents because front air bag deployment would not provide additional occupant protection. However, the side and curtain air bags and front center air bag may inflate in a rollover situation, when it is detected by the rollover sensor.
OTM030019
Air bags may not inflate if the vehicle collides with objects such as utility poles or trees, where the point of impact is concentrated and the collision energy is absorbed by the vehicle structure.
03
3-65
SRS care The SRS is virtually maintenance-free and there are no parts you can safely service by yourself. If the SRS air bag warning light does not illuminate when the Engine Start/Stop button is in the ON position, or continuously remains on, we recommend that the system be immediately inspected by an authorized HYUNDAI dealer. We recommend any work on the SRS system, such as removing, installing, repairing, or any work on the steering wheel, the front passengers panel, front seats and roof rails be performed by an authorized HYUNDAI dealer. Improper handling of the SRS system may result in serious personal injury.
WARNING To reduce the risk of serious injury or death take the following precautions: Do not attempt to modify or
disconnect the SRS components or wiring, including the addition of any kind of badges to the pad covers or modifications to the body structure.
Do not place objects over or near the air bag modules on the steering wheel, instrument panel, and the front passengers panel above the glove box.
Clean the air bag pad covers with a soft cloth moistened with plain water. Solvents or cleaners could adversely affect the air bag covers and proper deployment of the system.
We recommend that inflated air bags be replaced by an authorized HYUNDAI dealer.
If components of the air bag system must be discarded, or if the vehicle must be scrapped, certain safety precautions must be observed. We recommend that you consult an authorized HYUNDAI dealer for the necessary information. Failure to follow these precautions could increase the risk of personal injury.
Seats & Safety System
3-66
Additional safety precautions Passengers should not move out of or change seats while the vehicle is moving. A passenger who is not wearing a seat belt during a crash or emergency stop can be thrown against the inside of the vehicle, against other occupants, or be ejected from the vehicle. Do not use any accessories on seat belts. Devices claiming to improve occupant comfort or reposition the seat belt can reduce the protection provided by the seat belt and increase the chance of serious injury in a crash. Do not modify the front seats. Modification of the front seats could interfere with the operation of the supplemental restraint system sensing components or side air bags. Do not place items under the front seats. Placing items under the front seats could interfere with the operation of the supplemental restraint system sensing components and wiring harnesses. Do not cause impact to the doors. Impact to the doors when the Engine Start/Stop button is in the ON or START position may cause the air bags to inflate. Modifications to accommodate disabilities. If you require modification to your vehicle to accommodate a disability, contact the HYUNDAI Customer Connect Center at 800-633- 5151.
Adding equipment to or modifying your air bag equipped vehicle If you modify your vehicle by changing your vehicles frame, bumper system, front end or side sheet metal or ride height, this may affect the operation of your vehicles air bag system.
Air bag warning labels
OTMA030005
Air bag warning labels, required by the U.S. National Highway Traffic Safety Administration (NHTSA), are attached to alert the driver and passengers of potential risks of the air bag system. Be sure to read all of the information about the air bags that are installed on your vehicle in this Owners Manual.
4
Instrument cluster
Instrument cluster ............................................................................................ 4-4 Instrument cluster control ...........................................................................................4-5
Instrument panel illumination ...................................................................................4-5 Gauges and meters ......................................................................................................4-5
Speedometer .............................................................................................................4-5 Tachometer ................................................................................................................4-5 Engine coolant temperature gauge ......................................................................... 4-6 Fuel gauge ................................................................................................................. 4-6 Outside temperature gauge ...................................................................................... 4-7 Odometer .................................................................................................................. 4-8 Distance to empty .................................................................................................... 4-8 Fuel economy (for 12.3-inch cluster) ...................................................................... 4-9
Transmission shift indicator ........................................................................................ 4-9 Automatic transmission / Dual clutch transmission shift indicator ..................... 4-9
Warning and indicator lights ..................................................................................... 4-10 Seat belt warning light ............................................................................................ 4-10 Air bag warning light ............................................................................................... 4-10 Parking brake & Brake fluid warning light .............................................................. 4-10 Anti-lock Brake System (ABS) warning light ........................................................... 4-11 Electronic Brake Force Distribution (EBD) system warning light .......................... 4-11 Electric Power Steering (EPS) warning light .......................................................... 4-12 Charging system warning light ............................................................................... 4-12 Engine oil pressure warning light ........................................................................... 4-13 Low fuel level warning light .................................................................................... 4-13 Malfunction Indicator Lamp (MIL) .......................................................................... 4-13 Exhaust system (GPF) warning light (for gasoline engine) ................................... 4-14 Electronic Parking Brake (EPB) warning light ........................................................ 4-14 AUTO HOLD indicator light ..................................................................................... 4-15 Low tire pressure warning light .............................................................................. 4-15 Forward Safety warning light .................................................................................. 4-16 Lane Safety indicator light ...................................................................................... 4-16 4 Wheel Drive (4WD) warning light ........................................................................ 4-16 4 Wheel Drive (4WD) LOCK Indicator Light ............................................................4-17 LED headlight warning light .....................................................................................4-17 Icy road warning light .............................................................................................. 4-18 Electronic Stability Control (ESC) indicator light ................................................... 4-18 Electronic Stability Control (ESC) OFF indicator light ........................................... 4-18 Immobilizer Indicator Light (without smart key) .................................................. 4-19 Immobilizer Indicator Light (with smart key) ......................................................... 4-19 Downhill Brake Control (DBC) indicator light ........................................................4-20
4. Instrument cluster
4
AUTO STOP indicator light ......................................................................................4-20 Turn signal indicator light .........................................................................................4-21 High beam indicator light ........................................................................................4-21 High Beam Assist indicator light ..............................................................................4-21 Cruise Indicator Light ...............................................................................................4-21 SPORT Mode Indicator Light ...................................................................................4-22 ECO Mode Indicator Light .......................................................................................4-22 SMART Mode Indicator Light ..................................................................................4-22 Master warning light ................................................................................................4-22
LCD display messages ...............................................................................................4-23 Shift to P (for smart key system) .............................................................................4-23 Low key battery (for smart key system)..................................................................4-23 Press START button while turning wheel (for smart key system) .........................4-23 Check steering wheel lock system (for smart key system) .............................................................................................4-23 Press brake pedal to start engine (for smart key system) ....................................4-23 Key not in vehicle (for smart key system) ...............................................................4-23 Key not detected (for smart key system)................................................................4-23 Press START button again (for smart key system) ................................................4-23 Press START button with key (for smart key system) ...........................................4-24 Check BRAKE SWITCH fuse (for smart key system) .............................................4-24 Shift to P or N to start engine (for smart key system) ..........................................4-24 Battery discharging due to external electrical devices .........................................4-24 Door, Hood, Liftgate open indicator .......................................................................4-25 Sunroof open indicator ............................................................................................4-25 Low tire pressure .....................................................................................................4-25 Lights ........................................................................................................................4-26 Wiper ........................................................................................................................4-26 Low washer fluid ......................................................................................................4-26 Low fuel ....................................................................................................................4-26 Low engine oil ..........................................................................................................4-26 Engine overheated / Engine has overheated ......................................................... 4-27 Check exhaust system ............................................................................................. 4-27 Check headlight ....................................................................................................... 4-27 Check turn signal ..................................................................................................... 4-27 Check headlamp LED .............................................................................................. 4-27 Check Forward Collision-Avoidance Assist system ...............................................4-28 Check Lane Keeping Assist system ........................................................................4-28 Check Blind-Spot Collision Warning system..........................................................4-28 Check Driver Attention Warning system ................................................................4-28 Check High Beam Assist system .............................................................................4-28 Check Smart Cruise Control system .......................................................................4-28
4
4. Instrument cluster
LCD display ...................................................................................................... 4-29 LCD display control ....................................................................................................4-29 View modes ............................................................................................................... 4-30
Trip computer mode ................................................................................................ 4-31 Turn By Turn (TBT) mode ......................................................................................... 4-31 Driving Assist mode ................................................................................................. 4-31 Master warning group .............................................................................................4-32
User settings mode ....................................................................................................4-33 Trip computer (Type A).............................................................................................. 4-40
Trip modes ............................................................................................................... 4-40 Trip computer (Type B).............................................................................................. 4-43
Trip modes ............................................................................................................... 4-43
4-4
Instrument cluster
4.2-inch
12.3-inch
The actual cluster in the vehicle may differ from the illustration. For more information, refer to Gauges and meters section in this chapter.
OTMA040001/OCN7040080N
1. Tachometer 2. Speedometer 3. Engine coolant temperature gauge
4. Fuel gauge 5. Warning and indicator lights 6. LCD display
INSTRUMENT CLUSTER
04
4-5
Instrument cluster control Instrument panel illumination When the vehicles parking lights or headlamps are on, press the illumination control switch to adjust the brightness of the instrument panel illumination. When pressing the illumination control switch, the interior switch illumination intensity also adjusted. You can adjust the brightness of the instrument panel illumination form the User Settings Mode on the LCD display whentheignitionswitchison(Lights Illumination). When the vehicles parking lights or headlamps are on, interior switch illumination intensity and mood lamps are also adjusted. If your vehicle is equipped with additional navigation, please refer to the infotainment system manual separately supplied.
WARNING Never adjust the instrument cluster while driving. This could result in loss of control and lead to an accident that may cause death, serious injury, or vehicle damage. The brightness of the instrument
panel illumination is displayed. If the brightness reaches to the
maximum or minimum level, a chime will sound.
Gauges and meters Speedometer 4.2-inch 12.3-inch
OTM040059L OTM040006L
The speedometer indicates the speed of the vehicle and is calibrated in miles per hour (MPH) and/or kilometers per hour (km/h).
Tachometer 4.2-inch 12.3-inch
OTM040007L OTM040008L
The tachometer indicates the approximate number of engine revolutions per minute (rpm). Use the tachometer to select the correct shift points and to prevent lugging and/ or over-revving the engine.
NOTICE Do not operate the engine within the tachometer's RED ZONE. This may cause severe engine damage.
Instrument cluster
4-6
Engine coolant temperature gauge 4.2-inch Type A Type B
OTM040009 OTM040009L
12.3-inch Type A Type B
OTM040010 OTM040010L
This gauge indicates the temperature of the engine coolant when the ignition switch is in the ON position.
NOTICE If the gauge pointer moves beyond the normal range area toward the H (Hot) or 130 position, it indicates overheating that may damage the engine. Do not continue driving with an overheated engine. If your vehicle overheats, refer to If the Engine Overheats section in chapter 8.
WARNING Never remove the engine coolant reservoir cap when the engine is hot. The engine coolant is under pressure and could cause severe burn. Wait until the engine is cool before adding coolant to the reservoir.
Fuel gauge 4.2-inch Type A Type B
OTM040011 OTM0400011L
12.3-inch Type A Type B
OTM040012 OTM040012L
This gauge indicates the approximate amount of fuel remaining in the fuel tank.
04
4-7
Information The fuel tank capacity is given in
chapter 2. The fuel gauge is supplemented by
a low fuel warning light, which will illuminate when the fuel tank is nearly empty.
On inclines or curves, the fuel gauge pointer may fluctuate or the low fuel warning light may come on earlier than usual due to the movement of fuel in the tank.
WARNING Running out of fuel can expose vehicle occupants to danger. You must stop and obtain additional fuel as soon as possible after the warning light comes on or when the gauge indicator comes close to the E (Empty) or 0 level.
NOTICE Avoid driving with an extremely low fuel level. Running out of fuel could cause the engine to misfire damaging the catalytic converter.
Outside temperature gauge Type A Type B
OTMA048112 OTMA040008
This gauge indicates the current outside air temperatures by 1F (1C). Note that the temperature indicated on the LCD display may not change as quickly as the outside temperature (there may be a slight delay before the temperature changes.) You can change the temperature unit from the Settings menu in the Cluster. Select: - SetupUnitTemperatureUnit
F/C For vehicles equipped with Automatic Climate Control, you can also: - Press the AUTO button while pressing
the OFF button on the climate control unit for 3 seconds
Both the temperature unit on the cluster LCD display and climate control screen will change.
Instrument cluster
4-8
Odometer 4.2-inch 12.3-inch
OTMA048183 OCN7040015N
The odometer indicates the total distance that the vehicle has been driven and should be used to determine when periodic maintenance should be performed.
Distance to empty 4.2-inch 12.3-inch
OAD048563L OCN7040016N
The distance to empty is the estimated distance the vehicle can be driven with the remaining fuel.
If the estimated distance is below 1 mi. (1 km), the trip computer will display --- as distance to empty.
Information If the vehicle is not on level ground or
the battery power has been interrupted, the distance to empty function may not operate correctly.
The distance to empty may differ from the actual driving distance as it is an estimate of the available driving distance.
The trip computer may not register additional fuel if less than 6 liters (1.5 gallon) of fuel are added to the vehicle.
The distance to empty may vary significantly based on driving conditions, driving habits, and condition of the vehicle.
04
4-9
Fuel economy (for 12.3-inch cluster)
OTMA040002
The average fuel economy (1) and instant fuel economy (2) is displayed at the bottom of the cluster.
Automatic reset To automatically reset the average fuel economy, select between "After Ignition" or "After Refueling" from the Settings menu in the infotainment system screen.
Transmission shift indicator Automatic transmission / Dual clutch transmission shift indicator 4.2-inch 12.3-inch
OTM040016 OCN7040013N
This indicator informs the current gear engaged.
Instrument cluster
4-10
Warning and indicator lights
Information Make sure that all warning lights are OFF after starting the engine. If any light is still ON, this indicates a situation that needs attention.
Seat belt warning light
This warning light informs the driver that the seat belt is not fastened. For more details, refer to Seat Belts section in chapter 3.
Air bag warning light
This warning light illuminates: When you turn the ignition switch or
the Engine Start/Stop button to the ON position. - It illuminates for approximately 3~6
seconds and then goes off. When there is a malfunction with the
SRS. In this case, we recommend that you have the vehicle inspected by an authorized HYUNDAI dealer.
Parking brake & Brake fluid warning light
This warning light illuminates: When you set the ignition switch or
the Engine Start/Stop button to the ON position. - The parking brake & brake fluid
warning light illuminates for about 3 seconds and will then turn off once the parking brake is released.
Whenever the parking brake is applied.
Whenever the brake fluid level in the reservoir is low. - If the warning light illuminates
with the parking brake released, it indicates the brake fluid level in the reservoir is low.
If the brake fluid level in the reservoir is low: 1. Drive carefully to the nearest safe
location and stop your vehicle. 2. With the engine stopped, check the
brake fluid level immediately and add fluid as required (For more details, refer to Brake Fluid section in chapter 9). After adding brake fluid, check all brake components for fluid leaks. If a brake fluid leak is found, or if the warning light remains on, or if the brakes do not operate properly, do not drive the vehicle. We recommend that you have the vehicle inspected by an authorized HYUNDAI dealer.
04
4-11
Dual-diagonal braking system Your vehicle is equipped with dual- diagonal braking system. This means you still have braking on two wheels even if one of the dual systems should fail. With only one of the dual systems working, more than normal pedal travel and greater pedal pressure is required to stop the vehicle. Also, the vehicle will not stop in as short a distance with only a portion of the brake system working. If the brakes fail while you are driving, shift to a lower gear for additional engine braking and stop the vehicle as soon as it is safe to do so.
WARNING Parking Brake & Brake Fluid warning light Driving the vehicle with a warning light ON is dangerous. If the Parking Brake & Brake Fluid warning light illuminates with the parking brake released, it indicates that the brake fluid level is low. If this occurs, we recommend that you have the vehicle inspected by an authorized HYUNDAI dealer.
Anti-lock Brake System (ABS) warning light
This warning light illuminates: When you set the ignition switch or
the Engine Start/Stop button to the ON position. - The ABS warning light illuminates
for about 3 seconds and then goes off.
Whenever there is a malfunction with the ABS. Note that the hydraulic braking system will still be operational even if there is a malfunction with the ABS. If this occurs, we recommend that you have the vehicle inspected by an authorized HYUNDAI dealer.
Electronic Brake Force Distribution (EBD) system warning light
When the ABS warning and Parking Brake warning lights are on simultaneously, it may indicate a problem with the Electronic Brake Force Distribution system. If this occurs, we recommend that you have the vehicle inspected by an authorized HYUNDAI dealer.
Instrument cluster
4-12
WARNING Electronic Brake Force Distribution (EBD) system warning light When both ABS and Parking Brake & Brake Fluid warning lights are on, the brake system will not work normally and you may experience an unexpected and dangerous situation during sudden braking. If this occurs, avoid high speed driving and abrupt braking. We recommend that you have the vehicle inspected by an authorized HYUNDAI dealer as soon as possible.
NOTICE Electronic Brake Force Distribution (EBD) system warning light When the ABS warning light is on or both ABS and Parking Brake & Brake Fluid warning lights are on, the speedometer, odometer, or tripmeter may not work. Also, the EPS warning light may illuminate and the steering effort may increase or decrease. If this occurs, we recommend that you have the vehicle inspected by an authorized HYUNDAI dealer as soon as possible.
Electric Power Steering (EPS) warning light
This warning light illuminates: When you set the ignition switch or
the Engine Start/Stop button to the ON position. - The electric power steering warning
light illuminates for about 3 seconds and then goes off.
Whenever there is a malfunction with the electric power steering. If this occurs, we recommend that you have the vehicle inspected by an authorized HYUNDAI dealer.
Charging system warning light
This warning light illuminates: When there is a malfunction with either the alternator or electrical charging system.
If there is a malfunction with either the alternator or electrical charging system: 1. Drive carefully to the nearest safe
location and stop your vehicle. 2. Turn the engine off and check the
alternator drive belt for looseness or breakage. If the belt is adjusted properly, there may be a problem in the electrical charging system. If this occurs, we recommend that you have the vehicle inspected by an authorized HYUNDAI dealer as soon as possible.
04
4-13
Engine oil pressure warning light
This warning light illuminates: When the engine oil pressure is low.
If the engine oil pressure is low: 1. Drive carefully to the nearest safe
location and stop your vehicle. 2. Turn the engine off and check the
engine oil level (For more details, refer to Engine Oil section in chapter 2). If the level is low, add oil as required. If the warning light remains on after adding oil or if oil is not available, we recommend that you have the vehicle inspected by an authorized HYUNDAI dealer as soon as possible.
NOTICE If the engine does not stop
immediately after the Engine Oil Pressure warning light is illuminated, severe damage could result.
If the warning light stays on while the engine is running, it indicates that there may be serious engine damage or malfunction. In this case: 1. Stop the vehicle as soon as it is
safe to do so. 2. Turn off the engine and check the
oil level. If the oil level is low, fill the engine oil to the proper level.
3. Start the engine again. If the warning light stays on after the engine is started, turn the engine off immediately. If this occurs, we recommend that you have the vehicle inspected by an authorized HYUNDAI dealer.
Low fuel level warning light
This warning light illuminates: When the fuel tank is nearly empty. Add fuel as soon as possible.
NOTICE Driving with the Low Fuel Level warning light on or with the fuel level below E or 0 can cause the engine to misfire and damage the catalytic converter. Malfunction Indicator Lamp (MIL)
This indicator light illuminates: When you set the ignition switch or
the Engine Start/Stop button to the ON position. - The malfunction indicator light
illuminates for about 3 seconds and then goes off.
Whenever there is a malfunction with either the emission control system or the engine or the vehicle powertrain. If this occurs, we recommend that you have the vehicle inspected by an authorized HYUNDAI dealer.
NOTICE Driving with the Malfunction Indicator Lamp (MIL) on may cause damage to the emission control system which could affect drivability and/or fuel economy.
NOTICE If the Malfunction Indicator Lamp (MIL) illuminates, potential catalytic converter damage is possible which could result in loss of engine power. If this occurs, we recommend that you have the vehicle inspected by an authorized HYUNDAI dealer as soon as possible.
Instrument cluster
4-14
Exhaust system (GPF) warning light (for gasoline engine, if equipped) This warning light illuminates, when
accumulated soot reaches a certain amount.
When this warning light illuminates, it may turn off after driving the vehicle at more than 50 mph (80km/h) for about 30 minutes (above 3rd gear with 1500 ~ 4000 engine rpm). If this warning light blinks in spite of the procedure (at this time LCD warning message will be displayed), we recommend that you have the GPF system checked by an authorized HYUNDAI dealer.
NOTICE If you continue to drive with the GPF warning light blinking for a long time, the GPF system can be damaged and fuel consumption can worsen.
Electronic Parking Brake (EPB) warning light (if equipped) This warning light illuminates: When you set the ignition switch or
the Engine Start/Stop button to the ON position. - The EPB warning light illuminates
for about 3 seconds and then goes off.
Whenever there is a malfunction with EPB. If this occurs, we recommend that you have the vehicle inspected by an authorized HYUNDAI dealer.
Information The Electronic Parking Brake (EPB) warning light may illuminate when the Electronic Stability Control (ESC) indicator light comes on to indicate that ESC is not working properly. This does not indicate malfunction of EPB.
04
4-15
AUTO HOLD indicator light
This indicator light illuminates: [White] When you activate Auto Hold
by pressing the AUTO HOLD switch. [Green] When you stop the vehicle
completely by depressing the brake pedal with Auto Hold activated.
[Yellow] Whenever there is a malfunction with the Auto Hold function. If this occurs, we recommend that you have the vehicle inspected by an authorized HYUNDAI dealer.
For more details, refer to Electronic Parking Brake (EPB) section in chapter 6.
Low tire pressure warning light
This warning light illuminates: When you set the ignition switch or
the Engine Start/Stop button to the ON position. - The low tire pressure warning light
illuminates for approximately 3 seconds and then goes off.
When one or more of your tires are significantly underinflated. (The location of the underinflated tires are displayed on the LCD display.)
For more details, refer to Tire Pressure Monitoring System (TPMS) section in chapter 8.
This warning light remains ON after blinking for approximately 60 seconds, or repeatedly blinks ON and OFF in 3 second intervals: When there is a malfunction with the TPMS. If this occurs, we recommend that you have the vehicle inspected by an authorized HYUNDAI dealer as soon as possible. For more details, refer to Tire Pressure Monitoring System (TPMS) section in chapter 8.
WARNING Safe Stopping The TPMS cannot alert you to severe
and sudden tire damage caused by external factors.
If you notice any vehicle instability, immediately take your foot off the accelerator pedal, apply the brakes gradually with light force, and slowly move to a safe position off the road.
Instrument cluster
4-16
Forward Safety warning light (if equipped)
This warning light illuminates: When you set the ignition switch or
the Engine Start/Stop button to the ON position. - The Forward Safety warning light
illuminates for approximately 3 seconds and then goes off.
Whenever there is a malfunction with Forward Collision-Avoidance Assist.
If this occurs, we recommend that you have the vehicle inspected by an authorized HYUNDAI dealer. For more details, refer to Forward Collision-Avoidance Assist (FCA) section in chapter 7.
Lane Safety indicator light (if equipped)
This indicator light illuminates: [Green] When the system operating
conditions are satisfied. [White] When the system operating
conditions are not satisfied. [Yellow] Whenever there is a
malfunction with Lane Keeping Assist. If this occurs, we recommend that you have the vehicle inspected by an authorized HYUNDAI dealer.
For more details, refer to Lane Keeping Assist (LKA) section in chapter 7.
4 Wheel Drive (4WD) warning light
This warning light illuminates: Whenever there is a malfunction with the 4WD system. If this occurs, we recommend that you have the vehicle inspected by an authorized HYUNDAI dealer. For more details, refer to 4 Wheel Drive (4WD) section in chapter 6.
04
4-17
4 Wheel Drive (4WD) LOCK Indicator Light
This indicator light illuminates: Once you set the ignition switch or
Engine Start/Stop Button to the ON position. - It illuminates for approximately 3
seconds and then goes off. When you select 4WD Lock mode by
pressing the 4WD LOCK button. - The 4WD LOCK mode is to increase
the drive power when driving on wet pavement, snow covered roads and/or off-road.
NOTICE Do not use 4WD LOCK mode on dry paved roads or highway, it can cause noise, vibration or damage of 4WD related parts.
LED headlight warning light
This warning light illuminates: When you set the ignition switch or
the Engine Start/Stop button to the ON position. - The LED headlight warning light
illuminates for approximately 3 seconds and then goes off.
Whenever there is a malfunction with the LED headlight. If this occurs, we recommend that you have the vehicle inspected by an authorized HYUNDAI dealer.
This warning light blinks: Whenever there is a malfunction with a LED headlight related part. If this occurs, we recommend that you have the vehicle inspected by an authorized HYUNDAI dealer.
NOTICE Continuous driving with the LED Headlight warning light on or blinking can reduce LED headlight life.
Instrument cluster
4-18
Icy road warning light (if equipped)
This warning light is to warn the driver the road may be icy. When the temperature on the outside temperature gauge is approximately below 4C (40F), the Icy Road warning light and Outside Temperature Gauge blinks and then illuminates. Also, the warning chime sounds 1 time. You can activate or deactivate Icy Road Warning function from the User Settings menu in the cluster LCD display. Select: - SetupUserSettingsClusterIcy
Road Warning
Information If the Icy Road warning light appears while driving, you should drive more attentively and safely refraining from over-speeding, rapid acceleration, sudden braking or sharp turning, etc.
Electronic Stability Control (ESC) indicator light
This indicator light illuminates: When you set the ignition switch or
the Engine Start/Stop button to the ON position. - The Electronic Stability Control
indicator light illuminates for about 3 seconds and then goes off.
Whenever there is a malfunction with ESC system. If this occurs, we recommend that you have the vehicle inspected by an authorized HYUNDAI dealer.
This indicator light blinks: While ESC is operating. For more details, refer to Electronic Stability Control (ESC) section in chapter 6.
Electronic Stability Control (ESC) OFF indicator light (if equipped) This indicator light illuminates: When you set the ignition switch or
the Engine Start/Stop button to the ON position. - The ESC OFF indicator light
illuminates for approximately 3 seconds and then goes off.
When you deactivate ESC system by pressing the ESC OFF button.
For more details, refer to Electronic Stability Control (ESC) section in chapter 6.
04
4-19
Immobilizer Indicator Light (without smart key) (if equipped) This indicator light illuminates: When the vehicle detects the
immobilizer in the key with the ignition switch in the ON position. - At this time, you can start the
engine. - The indicator light goes off after
starting the engine.
This indicator light blinks: When there is a malfunction with the
immobilizer system. In this case, we recommend that you have the vehicle inspected by an authorized HYUNDAI dealer.
Immobilizer Indicator Light (with smart key) (if equipped) This indicator light illuminates for up to 30 seconds: When the vehicle detects the smart
key in the vehicle with the Engine Start/Stop button in the ACC or ON position. - At this time, you can start the
engine. - The indicator light goes off after
starting the engine.
This indicator light blinks for a few seconds: When the smart key is not in the
vehicle. - At this time, you cannot start the
engine.
This indicator light illuminates for 2 seconds and goes off: If the smart key is in the vehicle and
the Engine Start/Stop button is ON, but the vehicle cannot detect the smart key. In this case, we recommend that you have the vehicle inspected by an authorized HYUNDAI dealer.
This indicator light blinks: When there is a malfunction with the
immobilizer system. In this case, we recommend that you have the vehicle inspected by an authorized HYUNDAI dealer.
Instrument cluster
4-20
Downhill Brake Control (DBC) indicator light (if equipped)
This indicator light illuminates: When you set the ignition switch or
the Engine Start/Stop button to the ON position. - The downhill brake control indicator
light illuminates for about 3 seconds and then goes off.
When you activate the system by pressing the DBC button.
This indicator light blinks: When Downhill Brake Control system is operating.
This indicator light illuminates yellow: Whenever there is a malfunction with Downhill Brake Control system. If this occurs, we recommend that you have the vehicle inspected by an authorized HYUNDAI dealer. For more details, refer to "Downhill Brake Control (DBC) section in chapter 6.
AUTO STOP indicator light (if equipped)
This indicator light illuminates: When the engine enters the Idle Stop mode of ISG (Idle Stop and Go) system. When the engine automatically starts, the AUTO STOP indicator on the cluster Illuminates to white.
For more details, refer to "ISG (Idle Stop and Go) system" section in chapter 6.
Information When the engine automatically starts by the ISG system, some warning lights (ABS, ESC, ESC OFF, EPS or Parking brake warning light) may turn on for a few seconds. This happens because of low battery voltage. It does not mean the system has malfunctioned.
04
4-21
Turn signal indicator light
This indicator light blinks: When you operate the turn signal indicator stalk.
If any of the following occur, there may be a malfunction with the turn signal system. - The turn signal indicator light
illuminates but does not blink - The turn signal indicator light blinks
rapidly - The turn signal indicator light does not
illuminate at all If any of these conditions occur, we recommend that you have the vehicle inspected by an authorized HYUNDAI dealer.
High beam indicator light
This indicator light illuminates: When the headlamps are on and in
the high beam position When the turn signal lever is pulled
into the Flash-to-Pass position.
High Beam Assist indicator light (if equipped)
This indicator light illuminates: When the high-beam is on with the light switch in the AUTO position. If your vehicle detects oncoming or preceding vehicles, High Beam Assist will switch the high beam to low beam automatically. For more details, refer to High Beam Assist (HBA) section in chapter 5.
Cruise Indicator Light (if equipped)
This indicator light illuminates: When the cruise control system is enabled. For more details, refer to "Smart Cruise Control (SCC)" in chapter 7.
Instrument cluster
4-22
SPORT Mode Indicator Light (if equipped)
This indicator light illuminates When you select "SPORT" mode as drive mode. For more details, refer to "Drive Mode Integrated Control System" in chapter 6.
SMART Mode Indicator Light (if equipped)
This indicator light illuminates: When you select ''SMART" mode as drive mode. For more details, refer to "Drive Mode Integrated Control System'' in chapter 6.
Master warning light
This warning light illuminates: When there is a malfunction in operation in any of the following systems: - Forward Collision-Avoidance Assist
malfunction (if equipped) - Forward Collision-Avoidance Assist
radar blocked (if equipped) - Blind-Spot Collision Warning
malfunction (if equipped) - Blind-Spot Collision Warning radar
blocked (if equipped) - LED headlamp malfunction
(if equipped) - High Beam Assist malfunction
(if equipped) - Smart Cruise Control with Stop & Go
malfunction (if equipped) - Smart Cruise Control with Stop & Go
radar blocked (if equipped) - Tire Pressure Monitoring System
(TPMS) malfunction To identify the details of the warning, look at the LCD display.
04
4-23
LCD display messages Shift to P (for smart key system) This message is displayed if you try to turn off the vehicle without the gear in the P (Park) position. If this occurs, the Engine Start/Stop button turns to the ACC position.
Low key battery (for smart key system) This message is displayed if the battery of the smart key is discharged while changing the Engine Start/Stop button to the OFF position.
Press START button while turning wheel (for smart key system) This message is displayed if the steering wheel does not unlock normally when the Engine Start/Stop button is pressed. You should press the Engine Start/Stop button while turning the steering wheel right and left.
Check steering wheel lock system (for smart key system) This message is displayed if the steering wheel does not lock normally while the Engine Start/Stop button is pressed to the OFF position.
Press brake pedal to start engine (for smart key system) This message is displayed if the Engine Start/Stop button changes to the ACC position twice by pressing the button repeatedly without depressing the brake pedal. You can start the vehicle by depressing the brake pedal and then pressing the Engine Start/Stop button.
Key not in vehicle (for smart key system) This message is displayed if the smart key is not in the vehicle when you leave the vehicle with the Engine Start/Stop button in the ON or Start position. Always turn off the engine before leaving your vehicle.
Key not detected (for smart key system) This message is displayed if the smart key is not detected when you press the Engine Start/Stop button.
Press START button again (for smart key system) This message is displayed if you were unable to start the vehicle when the Engine Start/Stop button was pressed. If this occurs, attempt to start the engine by pressing the Engine Start/ Stop button again. If the warning message appears each time you press the Engine Start/Stop button, we recommend that you have the vehicle inspected by an authorized HYUNDAI dealer.
Instrument cluster
4-24
Press START button with key (for smart key system) This message is displayed if you press the Engine Start/Stop button while the warning message Key not detected is displayed. At this time, the immobilizer indicator light blinks.
Check BRAKE SWITCH fuse (for smart key system) This message is displayed if the brake switch fuse is disconnected. You need to replace the fuse with a new one before starting the engine. If that is not possible, you can start the engine by pressing the Engine Start/ Stop button for 10 seconds in the ACC position.
Shift to P or N to start engine (for smart key system) This message is displayed if you try to start the engine in any other position except P (Park) or N (Neutral).
Information You can start the engine with the gear in N (Neutral). But, for your safety, we recommend that you start the engine with the gear shifted to P (Park).
Battery discharging due to external electrical devices (if equipped) This message is displayed if the 12V battery voltage is weak due to any non-factory electrical accessories (ex. dashboard camera) while parking. Be careful that the battery is not discharged. If the message appears after removing the non-factory electrical accessories, have the vehicle inspected by an authorized HYUNDAI dealer.
04
4-25
Door, Hood, Liftgate open indicator
OTM040032
This warning is displayed if any door or hood or liftgate is left open. The warning will indicate which door is open in the display.
CAUTION Before driving the vehicle, you should confirm that the door/ hood/liftgate is fully closed. Also, check there is no door/hood/ liftgate open warning light or message displayed on the instrument cluster.
Sunroof open indicator (if equipped)
OTM040034
This warning is displayed if you turn off the engine when the sunroof is open. Close the sunroof securely before leaving your vehicle.
Low tire pressure
OTM040022L
This warning message is displayed if the tire pressure is low. The corresponding tire on the vehicle will be illuminated. For more details, refer to Tire Pressure Monitoring System (TPMS) section in chapter 8.
Instrument cluster
4-26
Lights Type A Type B
OJX1049007L OJX1049062L
This indicator displays which exterior light is selected using the lighting control. You can activate or deactivate Wiper/ Lights display function from the User Settings menu in the cluster LCD display. Select: - SetupUsersettingsCluster
Wiper/Lights display
Wiper Type A Type B
OJX1049008L OJX1049063L
This indicator displays which wiper speed is selected using the wiper control. You can activate or deactivate Wiper/ Lights display function from the User Settings menu in the cluster LCD display. Select: - SetupUsersettingsCluster
Wiper/Lights display
Low washer fluid This message is displayed if the washer fluid level in the reservoir is nearly empty. Have the washer fluid reservoir refilled.
Low fuel This message is displayed if the fuel tank is almost out of fuel. When this message is displayed, the low fuel level warning light in the cluster will come on. It is recommended to look for the nearest fueling station and refuel as soon as possible.
Low engine oil (if equipped) This warning message is displayed when the engine oil level should be checked. If this warning message is displayed, check the engine oil level as soon as possible and add engine oil as required. Slowly pour the recommended oil little by little into a funnel. Use only the specified engine oil. (Refer to "Recommended Lubricants and Capacities section in chapter 2.) Do not overfill the engine oil. Make sure the oil level is not above F (Full) mark on the dipstick.
04
4-27
Engine overheated / Engine has overheated (if equipped) This message is displayed when the engine coolant temperature is above 248F (120C). This means that the engine is overheated and may be damaged. If your vehicle is overheated, refer to Overheating section in chapter 8.
Check exhaust system (if equipped) This message is displayed if there is a problem with the GPF system. At this time, the GPF warning light will also blink. If this occurs, we recommend that you have the GPF system checked by an authorized HYUNDAI dealer.
GPF : Gasoline Particulate Filter
Check headlight (if equipped) This warning message is displayed if the headlamps are not operating properly. In addition, if a specific lamp(turn signal lamp etc.) is not operating properly, the warning message according to a specific lamp (turn signal lamp etc.) is displayed. A corresponding bulb may need to be replaced. Make sure to replace the burned out bulb with a new one of the same wattage rating.
Check turn signal (if equipped) This message is displayed if the turn signal lamps are not operating properly. A lamp may need to be replaced. Make sure to replace the burned out bulb with a new one of the same wattage rating.
Check headlamp LED (if equipped) This message is displayed if there is a problem with the LED headlamp. We recommend that you have the vehicle inspected by an authorized HYUNDAI dealer.
Instrument cluster
4-28
Check Forward Collision-Avoidance Assist system (if equipped) This warning message is displayed if there is a problem with Forward Collision-Avoidance Assist. Have the vehicle inspected by an authorized HYUNDAI dealer. For more details, refer to Forward Collision-Avoidance Assist (FCA) in chapter 6.
Check Lane Keeping Assist system (if equipped) This warning message is displayed if there is a problem with Lane Keeping Assist. Have the vehicle inspected by an authorized HYUNDAI dealer. For more details, refer to Lane Keeping Assist (LKA) in chapter 6.
Check Blind-Spot Collision Warning system (if equipped) This warning message is displayed if there is a problem with Blind-Spot Collision Warning. Have the vehicle inspected by an authorized HYUNDAI dealer. For more details, refer to Blind-Spot Collision Warning (BCW) in chapter 6.
Check Driver Attention Warning system (if equipped) This warning message is displayed if there is a problem with Driver Attention Warning. Have the vehicle inspected by an authorized HYUNDAI dealer. For more details, refer to Driver Attention Warning (DAW) in chapter 6.
Check High Beam Assist system (if equipped) This warning message is displayed if there is a problem with the High Beam Assist. Have the vehicle inspected by an authorized HYUNDAI dealer. For more details, refer to High Beam Assist (HBA) in chapter 5.
Check Smart Cruise Control system (if equipped) This warning message is displayed if there is a problem with Smart Cruise Control. Have the vehicle inspected by an authorized HYUNDAI dealer. For more details, refer to Smart Cruise Control (SCC) in chapter 6.
04
4-29
LCD display control
OTM040050
The LCD display modes can be changed by using the control buttons.
Switch Function
MODE button for changing modes
, MOVE switch for changing items
OK SELECT/RESET button for setting or resetting the selected item
Information When the infotainment system is applied, only the Users Setting mode on the infotainment system is supported but the Users Setting mode on the instrument cluster is not supported.
LCD DISPLAY
Instrument cluster
4-30
View modes
View modes Symbol Explanation
Driving Assist
This mode displays the state of : - Smart Cruise Control (SCC) - Highway Driving Assist (HDA) - Lane Keeping Assist (LKA) - Driver Attention Warning (DAW)
For more information, refer to "Smart Cruise Control (SCC) ", "Highway Driving Assist (HDA) ", "Lane Keeping Assist (LKA) , Driver Attention Warning (DAW) in chapter 7 and "4 Wheel Drive (4WD)" in chapter 6.
Trip Computer
This mode displays driving information such as the tripmeter, fuel economy, etc. For more details, refer to "Trip Computer" in this chapter.
Turn By Turn (TBT) This mode displays the state of the navigation.
User Settings In this mode, you can change settings of the doors, lamps, etc.
Warning The Warning mode displays warning messages related to the vehicle when one or more systems are not operating normally.
The information provided may differ depending on which functions are applicable to your vehicle.
04
4-31
Trip computer mode
OTMA060011
The trip computer mode displays information related to vehicle driving parameters including fuel economy, tripmeter information and vehicle speed. For more information, refer to "Trip Computer" in this chapter.
Turn By Turn (TBT) mode
OIK047147N
Turn-by-turn navigation, distance/time to destination information is displayed when Turn by Turn view is selected.
Driving Assist mode
OTMA040003
SCC/HDA/LKA This mode displays the state of the Smart Cruise Control (SCC), Highway Driving Assist (HDA) and Lane Keeping Assist (LKA). For more details, refer to each system information in chapter 7.
OIG059288L
Driver Attention Warning This mode displays the state of the Driver Attention Warning (DAW). For more details, refer to Driver Attention Warning (DAW) in chapter 7.
Instrument cluster
4-32
OTM040024
Driving force distribution (4WD) This mode displays information related to 4WD driving force. If the vehicle is in 4WD lock state, this mode is not displayed. For detailed information, refer to the "Four Wheel Drive" in the chapter 6.
Master warning group
OIG059097L
This warning light informs the driver the following situations. - Forward Collision-Avoidance Assist
malfunction (if equipped) - Forward Collision-Avoidance Assist
radar blocked (if equipped) - Blind-Spot Collision Warning
malfunction (if equipped) - Blind-Spot Collision Warning radar
blocked (if equipped) - LED headlamp malfunction
(if equipped) - High Beam Assist malfunction
(if equipped) - Smart Cruise Control malfunction (if
equipped) - Smart Cruise Control radar blocked (if
equipped) - Tire Pressure Monitoring System
(TPMS) malfunction The Master Warning Light illuminates if one or more of the above warning situations occur. At this time, a Master Warning icon ( ) will appear beside the User Settings icon ( ), on the LCD display. If the warning situation is solved, the master warning light will be turned off and the Master Warning icon will disappear.
04
4-33
OTM080005L
Tire Pressure This mode displays information related to Tire Pressure. For more details, refer to "Tire Pressure Monitoring System (TPMS)" in chapter 8.
User settings mode
OTM040060L
In this mode, you can change the settings of the instrument cluster, doors, lamps, etc. 1. Driver Assistance 2. Head-Up Display 3. Cluster 4. Lights 5. Door 6. Convenience 7. Units The information provided may differ depending on which functions are applicable to your vehicle.
Shift to P to edit settings This warning message illuminates if you try to select an item from the User Settings mode while driving. Automatic transmission / Dual clutch
transmission. For your safety, change the User Settings after parking the vehicle, applying the parking brake and selecting the shift button to P(Park).
Quick guide (Help) This mode provides quick guides for the systems in the User Settings mode. Select an item, press and hold the OK button. For more details about each system, refer to this Owners Manual.
Information When the infotainment system is applied, only the Users Setting mode on the infotainment system is supported but the Users Setting mode on the instrument cluster is not supported.
Instrument cluster
4-34
1. Driver Assistance
Items Explanation
SCC Reaction
To adjust the sensitivity of the Smart Cruise Control system. Fast/Normal/Slow For more details, refer to ''Smart Cruise Control (SCC)'' in chapter 7.
Driving Convenience
Lane Following Assist To activate or deactivate the Lane Following Assist. For more details, refer to the "Lane Following Assist (LFA)" in chapter 7.
Highway Driving Assist To activate or deactivate the Highway Driving Assist. For more details, refer to the "Highway Driving Assist (HDA)" in chapter 7.
Auto Highway Speed Control To activate or deactivate the Auto Highway Speed Control. For more details, refer to the "Navigation-based Smart Cruise Control (NSCC)" in chapter 7.
Warning Timing
To adjust the warning timing of the driver assistance system. Normal / Later
Warning Volume
To adjust the warning volume of the driver assistance system. High / Medium / Low / Off
Driver Attention Warning
Leading vehicle departure alert To activate or deactivate the Leading vehicle departure alert. For more details, refer to the "Leading vehicle departure alert" in chapter 7.
Inattentive Driving Warning To alert the driver's inattentive driving. For more details, refer to the "Driver attention Warning (DAW)" in chapter 7.
Forward safety
To adjust the Forward Collision-Avoidance Assist (FCA) Active Assist Warning Only Off For more details, refer to the "Forward Collision-Avoidance Assist (FCA)" in chapter 7.
Lane safety
To adjust the Lane Keeping Assist (LKA) function. Assist Warning Only Off For more details, refer to the "Lane Keeping Assist (LKA)" in chapter 7.
04
4-35
Items Explanation
Blind-Spot safety
Blind-Spot View To activate or deactivate the Blind-Spot View. For more details, refer to the "Blind-Spot View Monitor (BVM)" in chapter 7.
Safe Exit Assist (SEA) To activate or deactivate the Safe Exit Assistance. For more details, refer to the "Safe Exit Assistance (SEA)" in chapter 7.
Active Assist Warning Only Off To activate or deactivate the Blind-Spot View. For more details, refer to the "Blind-Spot View Monitor (BVM)" in chapter 7.
Parking Safety
Surround View Monitor Auto On To activate or deactivate the Surround View Monitor Auto On. For more details, refer to the "Surround View Monitor (SVM)" in chapter 7.
Parking Distance Warning Auto On To activate or deactivate the Parking Distance Warning Auto On. For more details, refer to the "Forward/Reverse Parking Distance Warning (PDW)" in chapter 7.
Rear Cross-Traffic Safety To activate or deactivate the Rear Cross-Traffic Safety. For more details, refer to the "Rear Cross-Traffic Collision-Avoidance Assist (RCCA)" in chapter 7.
Rear Active Assist To activate or deactivate the Rear Active Assist. For more details, refer to the "Reverse Parking Collision-Avoidance Assist (PCA)" in chapter 7.
Rear Warning Only To activate or deactivate the Rear Warning. For more details, refer to the "Reverse Parking Collision-Avoidance Assist (PCA)" in chapter 7.
Off To deactivate the Parking Safety.
Instrument cluster
4-36
2. Head-Up Display (if equipped)
Items Explanation
Enable Head-up display
If this item is checked, Head-Up Display will be activated.
Display Height To adjust the height of the image displayed.
Rotation To adjust the angle of the image displayed. Brightness To adjust the brightness of the image displayed. Content Selection To select the content to be displayed.
3. Cluster
Items Explanation
Reset fuel economy
At vehicle start After refueling Manually To reset the fuel economy displayed.
Wiper/Lights Display
To activate or deactivate the Wiper/ Light mode. When activated, the LCD display shows the selected Wiper/Light mode whenever you changed the mode.
Traffic Signs To set the traffic signs displayed. Icy Road Warning To activate or deactivate the icy road warning.
Welcome Sound To activate or deactivate the welcome sound.
Theme Selection
You can select the theme of the cluster. Type A Cluster : Theme A / Theme B / Theme C Type B Cluster : Link to Drive Mode / Theme A / Theme B / Theme C /
Theme D
04
4-37
4. Lights
Items Explanation
Illumination To adjust the illumination level. Level 1~20
One Touch Turn Signal
Off : The one touch turn signal function will be deactivated. 3, 5, 7 Flashes : The turn signal indicator will blink 3, 5, or 7 times when
the turn signal lever is moved slightly. For more details, refer to Lighting in chapter 5.
Ambient Light
Brightness (if equipped)
Off Level 1/2/3/4
Ambient Light Color
(if equipped)
Polar White/Moon White/Ice Blue/Ocean Blue/Jade Green/Orchid Green/ Freesia Yellow/ Sunrise Red/Aurora Purple/Lightening Violet
Headlight Delay
To activate or deactivate the headlamp delay function. For more details, refer to "Lighting" in chapter 5.
High Beam Assist
To activate or deactivate High Beam Assist function. For more details, refer to "High Beam Assist (HBA)" in chapter 5.
Instrument cluster
4-38
5. Door
Items Explanation
Automatically Lock
Enable on Shift : All doors will be automatically locked if the shift button is shifted from the P (Park) position to the R (Reverse), N (Neutral), or D (Drive) position. (only when the engine is running.)
Enable on Speed : All doors will be automatically locked when the vehicle speed exceeds 9.3mph (15km/h).
Off : The auto door lock operation will be deactivated.
Automatically Unlock
On Shift to P: All doors will be automatically unlocked if the shift button is shifted to the P (Park) position. (only when the engine is running.)
On key out/On vehicle off : All doors will be automatically unlocked when the ignition key is removed from the ignition switch or the Engine Start/ Stop button is set to the OFF position.
Off : The auto door unlock operation will be canceled.
Power Liftgate
If this item is checked, the power liftgate function will be activated. For more details, refer to "Power liftgate" in chapter 5.
Power Liftgate Opening
Speed
To adjust the power liftgate speed. Fast/Normal For more details, refer to "Power liftgate" in chapter 5.
Smart Liftgate
To activate or deactivate the smart liftgate. For more details, refer to "Smart liftgate" in chapter 5.
6. Convenience
Items Explanation
Seat Easy Access
Off : The seat easy access function is deactivated. Normal/Extended : When you turn off the engine, the driver's seat will
automatically move rearward short (Normal) or long (Extended) for you to enter or exit the vehicle more comfortably.
For more details, refer to "Driver Position Memory System" in chapter 5.
Rear Occupant
Alert
To activate or deactivate the Rear Occupant Alert. For more details, refer to "Rear Occupant Alert (ROA) system" in chapter 5.
Welcome Mirror/Light
On door unlock : The side view mirrors are unfolded and the welcome light turns on automatically when the doors are unlocked.
On driver approach : The side view mirrors are unfolded and the welcome light turns on automatically when the vehicle is approached with the smart key.
For more details, refer to ''Welcome System'' in chapter 5."
04
4-39
Items Explanation
Wireless Charging System
To activate or deactivate the wireless charging system in the front seat. For more details, refer to "Wireless cellular phone charging system" in chapter 5.
Auto Rear Wiper (in R)
To activate or deactivate the Auto Rear Wiper function. If you move the shift button from D to R when the front wiper operates, the rear wiper will operate automatically. Then, if you move the shift button from R to D, the rear wiper will stop."
Service Interval
Service Interval To activate or deactivate the service interval function.
Adjust Interval If the service interval menu is activated, you may adjust the time and distance.
Reset To reset the service interval.
7. Units
Items Explanation
Speed Unit To select the speed unit. (km/h, MPH)
Temperature Unit To select the temperature unit. (C,F)
Fuel Economy
Unit To select the fuel economy unit. (km/L, L/100km, MPG)
Tire Pressure Unit To select the tire pressure unit. (psi, kPa, bar)
Instrument cluster
4-40
Trip computer (Type A) The trip computer is a microcomputer- controlled driver information system that displays information related to driving.
Information Some driving information stored in the trip computer (for example Average Vehicle Speed) resets if the battery is disconnected.
Trip modes Drive Info
Since refueling
Accumulated Info
Auto Stop (if equipped)
Trip distance Average Fuel Economy Instant Fuel Economy
Trip distance Average Fuel Economy Instant Fuel Economy
Digital speedometer
Trip distance Average Fuel Economy Instant Fuel Economy
Type A
Type B
OTM040050
To change the trip mode, toggle the " , " switch on the steering wheel
04
4-41
Manual reset To clear the average fuel economy manually, press the OK switch on the steering wheel for more than 1 second when the Average Fuel Economy is displayed.
Automatic reset To automatically reset the average fuel economy, select between After Ignition or After Refueling from the Settings menu in the instrument cluster. - After Ignition: When the engine has
been OFF for 3 minutes or longer the average fuel economy will reset automatically.
- After Refueling: The average fuel economy will reset automatically after adding 6 liters (1.6 gallons) of fuel or more and after driving speed exceeds 1 mph (1 km/h).
For 12.3-inch instrument cluster, you can check the fuel economy in the center bottom of the cluster.
Type A Type B
OTMA040004 OTMA040005
Drive info Trip distance (1), average fuel economy (2), and instant fuel economy (3) are displayed. The information is combined for each ignition cycle. However, when the engine has been OFF for 3 minutes or longer the Drive Info screen will reset. To reset manually, press the OK switch on the steering wheel for more than 1 second when Drive Info is displayed.
Type A Type B
OTMA040006 OTMA040007
Since refuel(l)ing Trip distance (1), average fuel economy (2), and instant fuel economy (3) after the vehicle has been refueled are displayed. To reset manually, press the OK switch on the steering wheel for more than 1 second when Since Refueling is displayed.
Instrument cluster
4-42
Type A Type B
OTMA040009 OTMA040010
Accumulated info Accumulated trip distance (1), average fuel economy (2), and instant fuel economy (3) are displayed. The information is accumulated starting from the last reset. To reset manually, press the OK switch on the steering wheel for more than 1 second when Accumulated Info is displayed.
OJX1069044
Auto stop (if equipped) AUTO STOP display shows the elapsed time of engine stop by Idle Stop and Go system. For more details, refer to Idle Stop and Go (ISG) section in chapter 6.
OIK047151N
Digital speedometer Digital speedometer display shows the speed of the vehicle.
04
4-43
Trip computer (Type B) The trip computer is a microcomputer- controlled driver information system that displays information related to driving.
Information Some driving information stored in the trip computer (for example Average Vehicle Speed) resets if the battery is disconnected.
Trip modes Drive Info
Since refueling
Accumulated Info
Auto Stop (if equipped)
Trip distance Average Fuel Economy Elapsed time
Trip distance Average Fuel Economy Elapsed time
Digital speedometer
Trip distance Average Fuel Economy Elapsed time
Type A
Type B
OTM040050
To change the trip mode, toggle the " , " switch on the steering wheel
Instrument cluster
4-44
Manual reset To clear the average fuel economy manually, press the OK switch on the steering wheel for more than 1 second when the Average Fuel Economy is displayed.
Automatic reset To automatically reset the average fuel economy, select between After Ignition or After Refueling from the Settings menu in the instrument cluster. - After Ignition: When the engine has
been OFF for 3 minutes or longer the average fuel economy will reset automatically.
- After Refueling: The average fuel economy will reset automatically after adding 6 liters (1.6 gallons) of fuel or more and after driving speed exceeds 1 mph (1 km/h).
For 12.3-inch instrument cluster, you can check the fuel economy in the center bottom of the cluster.
Type A Type B
OTMA040012 OTMA040013
Drive info Trip distance (1), average fuel economy (2), and total driving time (3) are displayed. The information is combined for each ignition cycle. However, when the engine has been OFF for 3 minutes or longer the Drive Info screen will reset. To reset manually, press the OK switch on the steering wheel for more than 1 second when Drive Info is displayed.
Type A Type B
OTMA040014 OTMA040015
Since refuel(l)ing Trip distance (1), average fuel economy (2), and total driving time (3) after the vehicle has been refueled are displayed. To reset manually, press the OK switch on the steering wheel for more than 1 second when Since Refueling is displayed.
04
4-45
Type A Type B
OTMA040016 OTMA040017
Accumulated info Accumulated trip distance (1), average fuel economy (2), and total driving time (3) are displayed. The information is accumulated starting from the last reset. To reset manually, press the OK switch on the steering wheel for more than 1 second when Accumulated Info is displayed.
OJX1069044
Auto stop (if equipped) AUTO STOP display shows the elapsed time of engine stop by Idle Stop and Go system. For more details, refer to Idle Stop and Go (ISG) section in chapter 6.
OTMA040018
Digital speedometer Digital speedometer display shows the speed of the vehicle.
5
Convenient features
Accessing your vehicle ..................................................................................... 5-5 Remote key ...................................................................................................................5-5 Smart key ......................................................................................................................5-8 Immobilizer system .................................................................................................... 5-14 Hyundai Digital Key .....................................................................................................5-15
Door locks......................................................................................................... 5-31 Operating door locks from outside the vehicle.........................................................5-31 Operating door locks from inside the vehicle ..........................................................5-32 Auto door lock/unlock features.................................................................................5-35 Child-protector rear door locks .................................................................................5-35 Electronic child safety lock ........................................................................................5-36
Theft-alarm system ......................................................................................... 5-38 Integrated memory system ............................................................................ 5-39
Storing memory positions .........................................................................................5-39 Recalling memory positions ..................................................................................... 5-40 Resetting the system ................................................................................................ 5-40 Easy access function .................................................................................................. 5-41
Steering wheel ................................................................................................ 5-42 Electric Power Steering (EPS) ....................................................................................5-42 Tilt / Telescopic steering ............................................................................................5-43 Heated steering wheel ...............................................................................................5-43 Horn............................................................................................................................ 5-44
Mirrors ............................................................................................................. 5-45 Inside rearview mirror ................................................................................................5-45 Side View mirrors .......................................................................................................5-55 Reverse parking aid ....................................................................................................5-57
Windows .......................................................................................................... 5-58 Power windows ..........................................................................................................5-59
Panoramic sunroof .......................................................................................... 5-62 Sunshade ....................................................................................................................5-63 Sliding the sunroof .....................................................................................................5-63 Tilting the sunroof ..................................................................................................... 5-64 Closing the sunroof ................................................................................................... 5-64 Resetting the sunroof ................................................................................................5-65 Sunroof open warning .............................................................................................. 5-66
5. Convenient features
5
Exterior features .............................................................................................. 5-67 Hood ............................................................................................................................5-67 Liftgate ....................................................................................................................... 5-68 Power liftgate .............................................................................................................5-70 Smart liftgate .............................................................................................................. 5-75 Fuel filler door............................................................................................................. 5-77
Head-Up Display (HUD) .................................................................................5-80 Head-up display settings .......................................................................................... 5-80 Head-up display information ................................................................................... 5-80 Precautions while using the head-up display .......................................................... 5-81
Lighting ............................................................................................................ 5-82 Exterior lights..............................................................................................................5-82
High Beam Assist (HBA) ................................................................................5-86 System settings ......................................................................................................... 5-86 System operation .......................................................................................................5-87 System malfunction and limitations .........................................................................5-87
Interior lights ...................................................................................................5-89 Interior lamp AUTO cut ............................................................................................. 5-89 Front lamps ................................................................................................................ 5-89 Rear lamps ................................................................................................................. 5-90 Vanity mirror lamp ..................................................................................................... 5-90 Luggage compartment lamp .................................................................................... 5-91 Puddle lamp ................................................................................................................ 5-91 Welcome system ........................................................................................................5-92
Wipers and washers ........................................................................................ 5-93 Windshield wipers ......................................................................................................5-93 Front windshield washers ..........................................................................................5-95 Rear window wiper and washer ............................................................................... 5-96
Manual climate control system ...................................................................... 5-97 Heating and air conditioning .................................................................................... 5-98 System operation ......................................................................................................5-101 System maintenance ............................................................................................... 5-103
Automatic climate control system ................................................................5-105 Automatic heating and air conditioning ................................................................. 5-106 Manual heating and air conditioning ...................................................................... 5-106 System operation .......................................................................................................5-111 System maintenance ................................................................................................ 5-113
5
Windshield defrosting and defogging ...........................................................5-115 Manual climate control system ................................................................................ 5-115 Automatic climate control system ........................................................................... 5-116 Auto defogging system (only for automatic climate control system) ................... 5-117 Rear window defroster .............................................................................................5-118
Climate control additional features ...............................................................5-119 Auto defogging system ............................................................................................. 5-119 Auto dehumidify ....................................................................................................... 5-120 Recirculating air when washer fluid is used ............................................................ 5-121 Sunroof inside air recirculation ................................................................................ 5-121 Auto. Controls That Use Climate Control Settings (for drivers seat) .................... 5-121
Storage compartment ................................................................................... 5-122 Center console storage .............................................................................................5-122 Glove box ...................................................................................................................5-122 Tray .............................................................................................................................5-123 Luggage tray ..............................................................................................................5-123
Interior features ............................................................................................. 5-124 Cup holder ................................................................................................................ 5-124 Ashtray .......................................................................................................................5-125 Sunvisor .....................................................................................................................5-125 Power outlet ............................................................................................................. 5-126 USB charger ...............................................................................................................5-127 AC Inverter .................................................................................................................5-127 Wireless smart phone charging system .................................................................. 5-129 Clock .......................................................................................................................... 5-131 Coat hook ................................................................................................................... 5-131 Floor mat anchor(s) ...................................................................................................5-132 Side curtain ............................................................................................................... 5-133 Luggage net holder .................................................................................................. 5-133 Cargo security screen .............................................................................................. 5-134
Exterior features .............................................................................................5-136 Roof side rails ........................................................................................................... 5-136
5. Convenient features
5
Infotainment system ...................................................................................... 5-137 USB Port .....................................................................................................................5-137 Antenna ......................................................................................................................5-137 Steering wheel remote controls ...............................................................................5-137 Infotainment system ................................................................................................ 5-138 Voice recognition ..................................................................................................... 5-138 Bluetooth Wireless Technology ............................................................................. 5-139 How vehicle radio works .......................................................................................... 5-139
Infotainment System specifications ............................................................5-143 USB ............................................................................................................................ 5-143 Bluetooth .................................................................................................................. 5-144
Trademarks .....................................................................................................5-144
05
5-5
Remote key (if equipped)
OPD046001
Your HYUNDAI uses a remote key, which you can use to lock or unlock the driver and passenger doors or the liftgate. 1. Door Lock 2. Door Unlock 3. Liftgate Open 4. Panic
Locking To lock : 1. Close all doors, engine hood and
liftgate. 2. Press the Door Lock button (1) on the
remote key. 3. The doors will lock. The hazard
warning lights will blink. Also, the side view mirror will fold, if Convenience Welcomemirror/lightOndoor unlock is selected from the User Settings mode on the LCD display. For more details, refer to LCD Display in chapter 4.
4. Make sure the doors are locked by checking the position of the door lock button inside the vehicle.
WARNING Do not leave the keys in your vehicle with unsupervised children. Unattended children could place the key in the ignition switch and may operate power windows or other controls, or even make the vehicle move, which could result in serious injury or death.
Unlocking To unlock: 1. Press the Door Unlock button (2) on
the remote key. 2. The doors will unlock. The hazard
warning lights will blink two times. Also, the side view mirror will unfold, ifConvenienceWelcomemirror/ lightOndoorunlockisselected from the User Settings mode on the LCD display. For more details, refer to LCD Display in chapter 4.
Information After unlocking the doors, the doors will lock automatically after 30 seconds unless a door is opened.
Panic alarm The horn sounds and the hazard warning lights blink for about 30 seconds if this button is pressed for more than 0.5 seconds. To stop the horn and lights, press any button on the transmitter.
ACCESSING YOUR VEHICLE
Convenient features
5-6
Information The word HOLD is written on the button to inform you that you must press and hold the button for more than one second.
Start-up For detailed information refer to Key Ignition Switch in chapter 6.
NOTICE To prevent damaging the remote key: Keep the remote key away from
water or any liquid and fire. If the inside of the remote key gets damp (due to drinks or moisture), or is heated, internal circuit may malfunction, excluding the car from the warranty.
Avoid dropping or throwing the remote key.
Protect the remote key from extreme temperatures.
Mechanical key
OPD046003
If the remote key does not operate normally, you can lock or unlock the door by using the mechanical key. To unfold the key, press the release button then the key will unfold automatically. To fold the key, fold the key manually while pressing the release button.
NOTICE Do not fold the key without pressing the release button. This may damage the key.
Remote key precautions The remote key will not work if any of the following occur: The key is in the ignition switch. You exceed the operating distance
limit (about 10 m [30 feet]). The remote key battery is weak. Other vehicles or objects may be
blocking the signal. The weather is extremely cold. The remote key is close to a radio
transmitter such as a radio station or an airport which can interfere with normal operation of the remote key.
05
5-7
When the remote key does not work correctly, open and close the door with the mechanical key. If you have a problem with the remote key, it is recommended that you contact an authorized HYUNDAI dealer. If the remote key is in close proximity to your mobile phone, the signal could be blocked by your mobile phones normal operational signals. This is especially important when the phone is active such as making and receiving calls, text messaging, and/ or sending/receiving emails. Avoid placing the remote key and your mobile phone in the same location and always try to maintain an adequate distance between the two devices.
Information This device complies with Part 15 of the FCC rules. Operation is subject to the following three conditions: 1. This device may not cause harmful
interference. 2. This device must accept any
interference received, including interference that may cause undesired operation.
3. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the device.
NOTICE Keep the remote key away from electromagnetic materials that block electromagnetic waves to the key surface.
Battery replacement
OPD046002
Battery Type: CR2032 1. Insert a slim tool into the slot and
gently pry open the cover. 2. Remove the old battery and insert the
new battery. Make sure the battery position is correct.
3. Reinstall the rear cover of the remote key.
If you suspect your remote key might have sustained some damage, or you feel your remote key is not working correctly, it is recommended that you contact an authorized HYUNDAI dealer.
Information An inappropriately disposed battery can be harmful to the environment and human health. Dispose of the battery according to your local law(s) and regulation.
Convenient features
5-8
Smart key (if equipped) Type A
OTM050003
Type B
OTM050004
Your HYUNDAI uses a smart key, which you can use to lock or unlock a door (and liftgate) and even start the engine even just carrying the key. 1. Door lock 2. Door unlock 3. Liftgate Open (Liftgate)
Liftgate Open / Close (Power liftgate) 4. Panic Open / Close 5. Remote Smart parking Assist
(Forward) 6. Remote Smart parking Assist
(Rearward) 7. Remote start
Type C
OTMA050022
Type D
OTMA050021
1. Door lock 2. Door unlock 3. Panic 4. Remote Smart Parking Assist
(Forward) 5. Remote Smart Parking Assist
(Rearward) 6. Remote start
05
5-9
Locking your vehicle (Button type)
OTM048000
To lock : 1. Close all doors, engine hood and
liftgate. 2. Carry the smart key. 3. Either press the door handle button or
press the Door Lock button (1) on the smart key.
4. The hazard warning lights will blink. Also, the side view mirror will fold, ifConvenienceWelcomemirror/ lightOndoorunlockorOndriver approach is selected from the User Settings mode on the LCD display. For more details, refer to LCD Display in chapter 4.
5. Make sure the doors are locked by checking the position of the door lock button inside the vehicle.
Locking your vehicle (Touch sensor type)
OTMA050001
1. Close all of the doors, the hood and the liftgate.
2. Make sure you have the smart key in your possession and touch either the touch sensor on the door handle (the engraved part) or press the Door Lock button (1) on the smart key within 1 second.
3. The doors, hood and trunk are locked.
The chime will sound once and the hazard warning lights will blink. The door handle button will only
operate when the smart key is within 28~40 inches (0.7~1 m) from the outside door handle.
Make sure the doors are locked by pulling the door handle.
If you locked the door with the touch sensor on the door handle, the doors cannot be unlocked with the sensor within 3 seconds.
Convenient features
5-10
Even though you press the outside door handle button, the doors will not lock and the chime will sound for three seconds if any of the following occur: The Smart Key is in the vehicle. The Engine Start/Stop button is in
ACC or ON position. Any door except the liftgate is open.
CAUTION When you leave your vehicle with the smart key, make sure to press the button on the front door handle or touch the touch sensor on the front door handle to lock the doors after close all of the doors, the hood and the trunk. If you do not press the button or touch the touch sensor firmly, the doors might not be locked so please use caution.
WARNING Do not leave the Smart Key in your vehicle with unsupervised children. Unattended children could press the Engine Start/ Stop button and may operate power windows or other controls, or even make the vehicle move, which could result in serious injury or death.
Unlocking your vehicle Button type
OTM048000
Touch sensor type
OTM050005
1. Make sure you have the smart key in your possession.
2. Press the Door Unlock button (2) on the smart key, press the button on the front door handle or touch the door unlock sensor inside of the front door handle to unlock the doors.
3. All of the doors will unlock. When the doors unlock, the hazard warning lights will blink two times and the chime will sound. The door handle button will only
operate when the smart key is within 28~40 inches (0.7~1 m) from the outside door handle.
If you do not open the door after unlocking within 30 seconds, it will return to the lock mode.
If you unlocked the door with the door handle, the doors cannot be locked with the sensor within 2 seconds.
05
5-11
Opening the liftgate To open the liftgate: 1. Make sure you have the smart key in
your possession. 2. Press either the liftgate open/close
button on the vehicle or press and hold the liftgate open button on the smart key for more than one second. The hazard warning lights will blink two times and the liftgate will open.
Remotely starting vehicle (if equipped) You can start the vehicle using the Remote Start button on the smart key. To start the vehicle remotely: 1. Press the door lock button on the
smart key within 32 feet (10 m) from the vehicle.
2. Press the Remote Start button for more than 2 seconds within 4 seconds after pressing the door lock button.
3. The hazard warning lights will blink and the engine will start.
4. To turn off the remote start function, press the Remote Start button once.
Information The vehicle must be in P (Park) for the
remote start function to start. The engine turns off if you get on the
vehicle without a registered smart key. The engine turns off if you do not get
on the vehicle within 10 minutes after remotely starting the vehicle.
The Remote Start button may not operate if the smart key is not within 32 feet (10 m).
The vehicle will not remotely start if the engine hood or liftgate is opened.
Do not idle the engine for a long period.
Remotely moving vehicle forward or reverse (if equipped) With the smart key, the driver can move the vehicle forward or reverse using the Forward or Reverse button on the smart key. For more details, refer to Remote Smart Parking Assist (RSPA) section in chapter 7.
Panic alarm The horn sounds and the hazard warning lights blink for about 30 seconds if this button is pressed for more than 0.5 seconds. To stop the horn and lights, press any button on the transmitter.
Start-up You can start the vehicle without inserting the key. For more details, refer to the Engine Start/Stop Button section in chapter 6.
Information If the smart key is not moved for some time, the detection function for smart key operation will pause. Lift the smart key to activate the detection again.
NOTICE To prevent damaging the smart key: Keep the smart key in a cool,
dry place to avoid damage or malfunction. Exposure to moisture or high temperature may cause the internal circuit of the smart key to malfunction which may not be covered under warranty.
Avoid dropping or throwing the smart key.
Protect the smart key from extreme temperatures.
Convenient features
5-12
Mechanical key If the Smart Key does not operate normally, you can lock or unlock the drivers door by using the mechanical key. To remove the mechanical key from the smart key FOB:
OFE048007
Press and hold the release button (1) and remove the mechanical key (2). Insert the mechanical key into the key hole on the door. To reinstall the mechanical key, put the key into the hole and push it until a click sound is heard.
Loss of a smart key A maximum of two smart keys can be registered to a single vehicle. If you happen to lose your smart key, it is recommended that you should immediately take the vehicle and remaining key to your authorized HYUNDAI dealer or tow the vehicle, if necessary.
Smart key precautions The smart key may not work if any of the following occur: The smart key is close to a radio
transmitter such as a radio station or an airport which can interfere with normal operation of the transmitter.
The smart key is near a mobile two way radio system or a mobile phone.
Another vehicles smart key is being operated close to your vehicle.
If the smart key does not work correctly, open and close the door with the mechanical key. If you have a problem with the smart key, it is recommended to contact an authorized HYUNDAI dealer. If the smart key is in close proximity to your mobile phone, the signal could be blocked by your mobile phones normal operational signals. This is specifically relevant when the phone is active such as making and receiving calls, text messaging, and/or sending/receiving emails. When possible, avoid keeping the smart key and your mobile phone in the same location such as a pants or jacket pocket in order to avoid interference between the two devices.
05
5-13
Information This device complies with Part 15 of the FCC rules. Operation is subject to the following three conditions: 1. This device may not cause harmful
interference. 2. This device must accept any
interference received, including interference that may cause undesired operation.
3. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the device.
NOTICE Keep the smart key away from
electromagnetic materials that blocks electromagnetic waves to the key surface.
Always have the smart key with you when leaving the vehicle. If the smart key is left near the vehicle, the vehicle battery may be discharged.
Battery replacement If the Smart Key is not working properly, try replacing the battery with a new one. Battery Type: CR2032 To replace the battery:
ODN8059266
If the Smart Key is not working properly, try replacing the battery with a new one. Remove the smart key cover by turning the screwdriver clockwise by inserting the screwdriver (-) into the hole. Battery Type: CR2032 To replace the battery: 1. Remove the mechanical key. 2. Use a slim tool to pry open the rear
cover of the smart key. 3. Remove the old battery and insert the
new battery. Make sure the battery position is correct.
4. Reinstall the rear cover of the smart key.
If you suspect your smart key might have sustained some damage, or you feel your smart key is not working correctly, it is recommended that you contact an authorized HYUNDAI dealer.
Information An inappropriately disposed battery can be harmful to the environment and human health. Dispose of the battery according to your local law(s) or regulations.
Convenient features
5-14
Immobilizer system The immobilizer system helps protect your vehicle from theft. If an improperly coded key (or other device) is used, the engines fuel system is disabled. When the Engine Start/Stop button is pressed to the ON position, the immobilizer system indicator should come on briefly, then go off. If the indicator starts to blink, the system does not recognize the coding of the key. Press the Engine Start/Stop button to the OFF position, then press the Engine Start/Stop button to the ON position again. The system may not recognize your keys coding if another immobilizer key or other metal object (i.e., key chain) is near the key. The engine may not start because the metal may interrupt the transponder signal from transmitting normally. If the system repeatedly does not recognize the coding of the key, it is recommended that you contact your HYUNDAI dealer.
Do not attempt to alter this system or add other devices to it. Electrical problems could result that may make your vehicle inoperable.
WARNING In order to prevent theft of your vehicle, do not leave spare keys anywhere in your vehicle. Your immobilizer password is a customer unique password and should be kept confidential.
NOTICE The transponder in your key is an important part of the immobilizer system. It is designed to give years of trouble-free service, however you should avoid exposure to moisture, static electricity and rough handling. Immobilizer system malfunction could occur.
Information This device complies with Part 15 of the FCC rules. Operation is subject to the following three conditions: 1. This device may not cause harmful
interference. 2. This device must accept any
interference received, including interference that may cause undesired operation.
3. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the device.
05
5-15
Hyundai Digital Key Digital Key Application To use Hyundai Digital Key mobile app, you should install Hyundai digital key application. Search Hyundai digital key in the Google Play Store and download the app. Please refer to the detailed manual of the digital key app. The option can be found under the following app menu: Menu Application Info Tutorial Please note the manual before using the app.
This service is only available for Android smartphones. Please confirm supported/compatible devices on our website.
WARNING For used vehicle If any of the digital key (smartphone key or card key) is already registered when you press ON button after unlocking the doors, the message Digital key(s) active appears on the instrument cluster once. If you buy a used vehicle, you should confirm the message and delete the registered smartphone key and card key. In addition, please notify the Hyundai Customer Care Center. If the card key does not work properly, please delete the card key and register the smartphone key and re-register the card key.
For vehicle maintenance If you need to have your Digital Key System repaired or replaced please ensure you Smartphone Key is still active. You may have to pair your phone again. In the case, re-initialize your Digital Keys using the Hyundai Digital Key mobile app.
Digital key (smartphone) NFC function You can use the Digital Key NFC (Near Field Communication) function after turn your smartphone NFC settings on. And you should unlock & turn on smartphone screen to use it.
To change the NFC mode of the smartphone, please refer to the smartphone manual or contact to the customer service center of smartphone manufacturers.
Convenient features
5-16
Digital key (smartphone)
ODN8A059129
ODN8A059240
Hyundai Digital Key (Smartphone) Pairing 1. Turn the vehicle on with the Smart key
and make sure to keep the smart key inside the vehicle during digital key registration.
2. Register your Digital key from the vehicle user setting menu as follows.
With Navigation screen : From the infotainment screen menu, go to [Setup] - [Vehicle] - [Digital Key] - [Smart Phone Key] then select the [Save] from submenu.
Without navigation screen : From cluster menu, go to [Digital Key] - [Smart Phone Key] and select [Save].
Information The [Save] button will be disabled if the digital key (Smartphone key) is already saved. Please refer to Digital Key Delete in this manual and follow the digital key delete procedure in your car before Digital key save. Please refer to the Tutorial on your Digital key app and delete the previous saved key in your smartphone before save.
3. Select the vehicle to save on your Digital key application and activate the save mode.
Save mode is available only on the vehicle owners Digital key application.
4. Place the backside of smartphone onto the wireless charging pad(in- vehicle authentication pad). The saving process will begin automatically.
5. Once the digital key save is complete, a message will be shown on the infotainment screen or cluster.
6. Remove the smartphone from the pad and complete the saving process.
OTM050022
[B] : Wireless Charging Pad (In-vehicle Authentication Pad)
05
5-17
ODN8A059129
ODN8A059130
Hyundai Digital Key (Smartphone Key) Deletion 1. Turn the vehicle on with the Smart
key and make sure to keep the smart key inside the vehicle during delete process.
2. Delete your Digital key from the vehicle user setting menu as follows.
With Navigation screen : From the infotainment screen menu, go to [Setup] - [Vehicle] - [Digital Key] - [Smart Phone Key] then select the [Delete] from submenu.
Without navigation screen : From cluster menu, go to [Digital Key] - [Smart Phone Key] and select [Delete].
Information The [Delete] button will be disabled if there is no digital key (Smartphone key) saved.
3. Once the digital key delete is complete, a message will be shown on the infotainment screen or cluster.
4. Go to [Initialize Digital Key] menu on the digital key application and select the vehicle to delete the digital key information.
OpentheHyundaiDigitalKeyapp MenuInitializeDigitalKey
If the saved digital key information in your car is deleted due to vehicle maintenance, the digital key in your smartphone should be deleted as well.
For more information, please refer to the Tutorial on your Digital key app.
CAUTION If the smartphone is removed
from the interior authentication pad during enrollment, the saving process will be cancelled.
If the infotainment or instrument cluster screen is changed during enrollment, the saving process will be cancelled.
If the vehicle is turned off during enrollment, the saving process will be cancelled.
If the gear is shifted, the saving process will be cancelled.
If you try to save the smartphone which is not logged in with the vehicle owners ID or if you try to save the Card key, the saving process will not begin.
If the NFC setting on your smartphone is off, the saving process will not begin.
If the smartphone screen is changed to off or locked status, the saving process will be cancelled.
If there is no Smart key during the save process, the saving process will not begin.
Convenient features
5-18
Set up main vehicle You can manage multiple digital keys from the Digital key app. From the list of digital keys you own, select the vehicle you want to make your priority vehicle. For more information, please refer to the Tutorial on your Digital key app.
OTMA050020
[1] : Door handle authentication pad
NFC door lock/unlock You should contact your smartphones NFC antenna(backside of phone) to door handle authentication pad (1) marked position near by the lock button) of drivers (or front passengers) outside door for 2 seconds to lock or unlock the doors. If the Two Press Unlock feature is applied (press twice for unlocking), drivers seat door will be unlocked by contacting the digital key (smartphone key). In this state, if you contact one more time within 4 seconds, all the doors unlock. Please make sure the doors are locked. If you do not open any of the doors after unlocking, it automatically re-lock after 30 seconds. Note that you cannot lock your vehicle when you contact NFC antenna in the smartphone to the door handle pad if any of the following occurs: The Proximity / Smart Key is in the
vehicle. The POWER button is in ACC or ON
position. Any of the doors, hood and trunk is
opened. If the smartphone digital key does not work, please remove the smartphone more than 4 inches (0.1 m) from the door handle authentication pad and try it again.
05
5-19
After unlock the door or start up the vehicle with digital key, even though the driver tries to lock the doors by the central door lock switch, the door lock will be once locked and immediately released at the moment of door closed.
Start-up with Digital Key 1. After placing your registered
smartphone onto the interior authentication pad (wireless charger), step on the brake and press the Engine Start/Stop button.
2. After start-up, the digital key data will be automatically updated. It takes 5 to 20 seconds, after that, the smartphone can be go into the wireless charging mode automatically. Once the engine started, you can remove the smartphone from the pad.
OTM050022
[B] : Wireless Charging Pad (In-vehicle Authentication Pad)
Information After reconnecting the vehicle battery power supply or charging the battery, it may take time to operate due to remote renewal of security information. When you lock or unlock the door with NFC, please contact and hold your smartphone on the door handle until it works.
The solution allows for offline mode usage when the mobile data connection of the smartphone is weak. When you are in the place where the mobile data connection of your smartphone is available and place your smartphone on the interior authentication pad (wireless charger) and start up your vehicle or contact the digital key on the door handle to lock or unlock the door, the remote renewal of security information starts automatically. Even though the engine is turned on, please wait until the remote renewal process is completed and wireless charger is converted to charging mode.
CAUTION The engine can be turned on if the registered smartphone or card key is placed on the interior authentication pad (wireless charger). Do not leave unsupervised children or people who are not aware of the system since it can result in serious injury or death. Always have the registered digital key (smartphone) or card key with you to prevent vehicle theft when leaving the vehicle. For more information, refer to the Engine Start/Stop button in chapter 6.
Convenient features
5-20
Remote Control with Digital Key To use the remote control function with your android smartphone, Bluetooth must be turned on.
Remote Control Connection with Digital Key 1. Open Hyundai digital key application
on the smartphone. Select the vehicle to activate the remote control function as a main vehicle.
2. Approach with the activated smartphone app to your vehicle and you can check whether the connection is available. If it enables your smartphone to connect, connect with your vehicle by pressing the connect button. The remote control function is activated after completing the process.
Remote Control Operation with Digital Key You can execute the remote control operation including door lock/unlock, panic on/off, remote start / remote stop and trunk opening. The icon for each function will be highlighted and alarm/vibration also provided when the operation is performed. Note that you cannot lock your vehicle using the Hyundai digital key app if any of the following occurs: The POWER button is in ACC or ON
position. Any doors are open. When the smartphone and the vehicle are connected by the Bluetooth function but the remote control command cannot be received over 5 minutes, the remote control connection is cancelled automatically.
CAUTION If metallic window tint was applied
to your vehicle, it may cause bad Bluetooth connection or performance degradation of the digital key.
If multiple users operate the remote control function simultaneously, the connection between the digital key and the vehicle might result in failed commands. Please connect and operate the remote control function only the necessary user.
When using the remote control operation, the driver (the remote control user) should leave the vehicle after confirming the door lock (the chime sounds once and the hazard warning lights blink).
The remote functions of the Digital Key app enables the vehicle to be controlled from a set distance. If the digital key or the vehicle goes beyond the operable distance, the remote control function might be disconnected or cancelled.
If the digital key (smartphone) is connected with the vehicle for the remote control, the driver with the key goes far away from the vehicle, the function might not work.
If the remote control operation is executed where the mobile connection is weak, Bluetooth connection is poor due to several Bluetooth devices or there is an object such as metal or concrete, it might be delayed or the operable distance might decrease. You should not cover the smartphone with your hand or place other devices which can cause frequency interference. It may result in poor performance.
If the remote control function is not available, please use NFC function to lock or unlock the doors.
05
5-21
Remote Start with Digital Key When the shift button of your vehicle
is in P (Park) and all of the doors including trunk and hood is locked and the vehicle is off, press the Door Lock button in the Hyundai Digital Key app then press the Remote Start button within 4 seconds. You can confirm the engine is on if the hazard warning lights blinks two times and the chime sounds.
If you want to turn off the engine, press Remote Engine Stop. Air Conditioner / Heating system maintains the same status as when you last used the vehicle.
Unless you put the registered digital key(smartphone) on the interior authentication pad (wireless charger) when the remote start function is on, the engine will turn off.
If you do not get on the vehicle within 10 minutes after the engine turns on, the vehicle will turn off.
For more information, refer to the Engine Start/Stop button in chapter 6.
Vehicle information Display The digital key application displays the vehicle information such as driving or door conditions through the communication with the vehicle. How to check : Select the vehicle
what you want to check and touch the vehicle image, then vehicle information display page will be shown.
Contents : accumulated odometer, latest fuel economy, driving range, fuel remaining, tire pressure, doors lock/unlock status and last data updated time.
Displayed vehicle date could be differed from the current vehicle condition.
For more information, please refer to the Tutorial on your Digital key app.
Smartphone change/App deletion If you change your smartphone or delete the Hyundai Digital Key App, please refer to the following to set up your Digital Key:
Smartphone Change/ Reset If you change or reset the smartphone, the registered digital key in your previous smartphone may not be used. Please refer to following procedure to use the digital key. 1. Install the digital key application and
log in. 2. If you are the owner, retry the Digital
key save process. 3. If you are the sharer, need to re-share
the key from owner.
App delete & reinstall/ Delete App data You can re-download the digital key from server in these cases as follow procedure. 1. Reinstall the application and log in. 2. Input the PIN number for user
verification. 3. If PIN is correct, digital key data
will be re-downloaded to your smartphone and you can use it without any further registration or sharing.
Smartphone operability with Digital Key The digital key application may not be available to old type smartphones. Please check the available smartphone models with your dealer. NFC antenna position on the smartphone can be confirmed on each smartphones manual or contact to customer service center of the smartphone manufacture.
Convenient features
5-22
CAUTION Do not leave the registered digital
key (smartphone) and card key in your vehicle. Please carry around your keys all the times.
If you happen to lose your digital key (smartphone) or card key registered as a main users key, you should immediately delete the key on the vehicles key menu. For more information, refer to the Digital Key Deletion in this chapter.
If you registered your digital key (smartphone) or card key in the vehicle, a message appears on the instrument cluster and let you know the key is registered. (Message: Digital key(s) active.)
If you buy a used vehicle, you should confirm the message and delete the registered smartphone key and card key. In this case, you should carry your smart key.
If you keep place the NFC card of the digital key on the interior authentication pad (wireless charger) while driving, it may cause a malfunction of the NFC card.
You should remove your NFC card of the digital key on the interior authentication pad after turning on the engine.
Hyundai digital key app may not work properly when the NFC or Bluetooth communication between smartphone and car is not good.
If the remote control operation is executed where the mobile connection is weak, Bluetooth connection is poor due to lots of Bluetooth devices or there is an object such as metal or concrete, it might be delayed or the operable distance might decrease. Especially, you should not cover the smartphone with your hand or place other devices which can cause frequency interference. It may result in poor performance.
If the remote control function is not activated, please use NFC function to lock or unlock the doors
You should be careful not to press the remote control button on the digital key (smartphone) accidentally.
If the digital key (smartphone) is discharged or defective or you cannot use the digital key since the vehicle battery is discharged, use the inside door lock button to lock all of the doors.
CAUTION Hyundai digital key app on the
smartphone and card key may not work if any of the following occurs: - Hyundai digital key app on the
smartphone is deleted. (Required to reinstall the app)
- Account log in information of Hyundai digital key app is expired. (Required to re-log in)
- When you try to log in to another smartphone instead of the registered smartphone with same user account.
- Smartphone rooting or app hacking is detected.
- Smartphone battery or the vehicle battery is discharged.
- Smartphones screen is off or locked.
- NFC or Bluetooth is turned off on the smartphone settings.
- Smartphones mobile network setting is off or airplane mode is activated.
- A credit card is overlapped in the back of your smartphone or metal or thick case is used.
- Use the card key with insert it into the wallet or card holder or overlapping with other cards.
05
5-23
- If you use a smart phone cover that uses wireless communication or is made of metal, the digital key NFC function may not work properly. Remove the smart phone cover before using the digital key NFC function.
The vehicle may not be controlled by the smartphone if any of the following occurs:
- Basic and necessary functions of the smartphone manufacturer are operating. (General call, urgent call, audio or NFC payment)
- Wireless earphone is operating. (General call, urgent call or audio)
- The digital key app function such as basic setting or app launching is limited by prior policy according to the manufacturer while using a smartphone produced by domestic and foreign manufactures.
If you change the smartphone number, you should modify the user account information on the HYUNDAI customer web site to use the digital key app.
If the vehicle owner changes the smartphone device, the new smartphone should be registered in the car after deleting the registered digital key(smartphone).
If a sharer changes or reset the smartphone, the key should be re- shared from owner.
Some of the old smartphone may not work properly. Please check the available smartphone models with your dealer.
NFC antenna position on the smartphone can be confirmed on each smartphones manual or contact to customer service center of the smartphone manufacture.
Digital key (Card key)
ODN8A059243
ODN8A059131
Digital key (Card key) save 1. Install Hyundai digital key app in
main users smartphone and register the digital key (smartphone). Please refer to the registration method of the digital key (smartphone).
2. Using the [Pair Card Key] menu on the digital key application, you can activate the Card Key registration mode.
NFC authentication : enter the NFC authentication menu and contact the smartphone on the outside door handle.
Bluetooth authentication : enter the Bluetooth authentication menu and press the [OK] button for activation. If you activate the registration mode, you should complete the Card saving process with in 5 minutes.
If you have not registered the digital key (smartphone), please register the digital key (card key) with two smart keys.
Convenient features
5-24
3. Register the NFC card key on the
Users Settings menu after turning on the vehicle.
With Navigation screen : From the infotainment screen menu, go to [Setup] - [Vehicle] - [Digital Key] - [Card Key] then select the [Save] from submenu.
Without navigation screen : From cluster menu, go to [Digital Key] - [Card Key] and select [Save]. The [Save] button will be disabled if the digital key (Card key) is already saved. Please refer to Digital Key Delete in this manual and follow the digital key delete procedure in your car before Digital key save.
4. Place the NFC card key onto the interior authentication pad (wireless charger). The saving process will begin automatically.
5. If the key is enrolled, the message will be displayed on the infotainment screen or instrument cluster.
Once the card key registration mode is activated, the process should be completed within 5 minutes. After then, you should reactivate once again for registration.
For the digital key(card key) saving, the smart key(fob) must be exist inside of vehicle.
Once a Card key is registered, it cannot be reuse onto another vehicle.
ODN8A059243
ODN8A059132
Digital key (Card key) deletion You should have the smart key to delete the digital key (card key) so please carry around the key. 1. Get on the vehicle with the smart key. 2. Delete the NFC card key on the Users
Settings menu after turning on the engine.
With Navigation screen : From the infotainment screen menu, go to [Setup] - [Vehicle] - [Digital Key] - [Card Key] then select the [Delete] from submenu.
Without navigation screen : From cluster menu, go to [Digital Key] - [Card Key] and select [Delete].
If there is no saved digital key(card key), [Delete] menu will not be activated.
05
5-25
To delete the saved digital key (card key), the smart key must be exist inside the vehicle.
The deleted digital key (card key) can be re-registered before registering a new digital key (card key).
If you try to register a new digital key (card key), the previously registered digital key (card key) cannot be used again.
OTMA050020
[1] : Door handle authentication pad
NFC door lock/unlock You should contact digital key (card key) to door handle authentication pad (1, marked position near by the lock button) of drivers (or front passengers) outside door for 2 seconds to lock or unlock the doors. If the Two Press Unlock feature is applied (press twice for unlocking), drivers seat door will be unlocked by contacting the digital key (card key). In this state, if you contact one more time within 4 seconds, all the doors unlock.
Inoperable condition If you do not contact the digital key (card key) to the center of the door handle authentication pad accurately., it may not work. In addition, if you overlap and use the key with NFC-enabled cards such as transportation card or credit card, it does not work. Note that if you try to lock your vehicle with digital key (card key) in following cases, the doors will not be locked and chime will sound for 3 seconds. The Smart Key is in the vehicle. The POWER button is in ACC or ON
position. Any of the doors, hood and trunk are
open
Convenient features
5-26
If the digital key (card key) does not work, please detach the key around 4 inches (0.1 m) from the handle authentication pad and retry to contact. The card key may be damaged by the impact. It would not work properly if the key is damaged. You should buy a new card and register again. Long-time exposure to high temperature may cause the card key to malfunction. Please be careful not to expose the key to direct sunlight or high temperature.
After unlock the door or start up the vehicle with digital key, even though the driver tries to lock the doors by the central door lock switch, the door lock will be once locked and immediately released at the moment of door closed.
Start-up with Card key After placing your registered card key onto the interior authentication pad (wireless charger), step on the brake and press the Engine Start/Stop button.
WARNING If you do not place the digital key
(card key) onto the center of the interior authentication pad (wireless charger) exactly, the card key may not be recognized. If the engine is not turned on, adjust and place the key again.
If you overlap and use the key with NFC-enabled cards such as transportation card or credit card, the card key may not be recognized.
If the digital key (card key) does not work, please detach the key around 4 inches (0.1 m) from the handle authentication pad and retry to contact.
The card key may be damaged due to impact. It would not work properly if the key is damaged. You should buy a new card and register again.
For more information, refer to the Engine Start/Stop button in chapter 6.
05
5-27
Type A
ODN8A059133
Type B
ODN8A059247
Digital key application/cancellation
If you do not want to use the digital key (smartphone and card key), you can disable the function temporarily. You should have the smart key when you change the settings
With Navigation screen : From the infotainment screen menu, go to [Setup] - [Vehicle] - [Digital Key] - [Enable Digital Keys] (deselect)
Without navigation screen : From cluster menu, go to [Digital Key] - [Enable Digital Keys] (deselect)
Information For the digital key disable, the smart key must be exist inside the car. For the digital key enable, the smart key does not need.
CAUTION If you uncheck Enable digital keys, it is impossible to lock or unlock the doors or start up the vehicle with digital keys such as smartphone and card key. If you check Enable digital keys again, the registered digital keys(smartphone and card key) are available. Even though you stop the digital key function, the registered keys (smartphone and card key) are not deleted.
Personalized profile and vehicle settings Connect the registered digital key with personalized profile. Then in case you lock or unlock the door with the digital key NFC function or unlock the door remotely by digital key application Bluetooth connection, the vehicle will play the personalized user profile settings. Profile connection and personalization are available for Driver 1 and Driver 2.
Convenient features
5-28
Profile link/unlinked Profile link 1. SelectSetupUserProfile
ProfileSettingsLinkDigitalKey (Smartphone) on the infotainment system menu.
2. Unlock and place your smartphone on the wireless charger according to a message and it automatically starts to interwork.
3. It begins the profile link with a message.
4. If you select Link, the registered phone numbers digital key and the users profile are linked.
5. The interconnection process is completed with a message.
Profile unlink 1. Select Digital Key information on
infotainment Vehicle Settings menu. It is possible to unlink only if the profile is interconnected.
2. Profile unlink is completed with a message.
Information If you connect both Driver 1 and Driver 2 with a single smartphone, the smartphone digital key always works as Driver 1. If you unlink the Driver 1, personalization function will operate as Driver 2.
PRECAUTION for vehicle profile link and unlink When you link or unlink the profile of digital key, you should be careful of the following. Profile link is possible to use with the
digital key. (Infotainment Vehicle SettingsModeDigitalKeyEnable Digital Keys)
Profile link information remains even when you set the digital key function disable.
Only the smart phone with digital key app enables you to link your profile. (Impossible to link with NFC card)
Profile link works only when the smart phone and the digital key are registered to the vehicle. The smart phone with another vehicles digital key cannot link profile.
If you remove the smart phone from the wireless charger before completing the profile link, it does not work.
To unlink the profile, the smart phone does not need to be on the wireless charger.
05
5-29
Vehicle personalization operation The personalization function linked with digital key works as following conditions: Contact the drivers door handle with
the profile linked smart phone to lock or unlock the doors (Personalization does not operate when locking or unlocking the front passenger door.)
Remote door unlock with the profile linked smartphone digital key app.
The profile linked with digital key can be changed manually in the infotainment system setup screen.
Precaution for digital key profile link and unlink Profile operation according to door lock/ unlock system is as follows.
Item Personalization Operation
Initial value Guest Profile linked smart phone
key Linked profile
Profile unlinked smart phone
key Recently activated profileNFC card key
Smart key The personalization function using
the digital key can be operated after linking the digital key on the infotainment system profile menu.
You should use the personalization function during stopping your vehicle safely.
Convenient features
5-30
Vehicle personalization with digital key The available personalization function in the vehicle is as follows.
System Personalization Item
USM
HUD Position adjustment of image, Information display selection, Size and color of speedometer
Lamp Blink number of one-touch signal lamps
Cluster Information display on the cluster, Voice volume, Welcome sound
Seat/Mirror Seat position, O/S mirror position, Easy Access
Intelligent driving posture assist (Smart IMS)
Door Automatic door lock/unlock, Two Press Unlock
AVN
Navigation Preferred volume of the navigation system, Recent destination
User preset My menu list settings, Radio preset
Phone connectivity
Bluetooth preferential connect CarPlay/Android Auto/MirrorLink On/Off
Air conditioning Operating condition
Latest operation setup of the following functions:
Temperature, AUTO, air flow direction, air volume, air conditioner, air intake control, SYNC, Front windshield defroster, OFF
For more information of personalization, refer to the infotainment system manual.
CAUTION If you leave the digital key after locking or unlocking the doors or starting up the vehicle with the smart key, the doors can be locked by the central door lock. Please carry around the digital key all the time.
05
5-31
Operating door locks from outside the vehicle Mechanical key Remote key
OTM048001L
Smart key
OTM050083
[A] : Unlock, [B] : Lock
First, pull the outside door handle (1) and push the hook (2) located inside of outside door handle by using the mechanical key. And remove the cover (3). Turn the key toward the rear of the vehicle to lock and toward the front of the vehicle to unlock. If you lock/unlock the drivers door with a key, a drivers door will lock/unlock. Once the doors are unlocked, they may be opened by pulling the door handle. When closing the door, push the door by hand. Make sure that doors are closed securely.
Remote key
OTMA050015MX
To lock the doors, press the Door Lock button (1) on the remote key. To unlock the doors, press the Door Unlock button (2) on the remote key. Once the doors are unlocked, they may be opened by pulling the door handle. When closing the door, push the door by hand. Make sure that doors are closed securely.
DOOR LOCKS
Convenient features
5-32
Smart key
OTM048000
To lock the doors, press the button on the outside door handle while carrying the smart key with you or press the door lock button on the smart key. To unlock the doors, press the button on the outside door handle while carrying the smart key with you or press the door unlock button on the smart key. Once the doors are unlocked, they may be opened by pulling the door handle. When closing the door, push the door by hand. Make sure that doors are closed securely.
Information In cold and wet climates, door lock
and door mechanisms may not work properly due to freezing conditions.
If the door is locked/unlocked multiple times in rapid succession with either the vehicle key or door lock switch, the system may stop operating temporarily in order to protect the circuit and prevent damage to system components.
Operating door locks from inside the vehicle With the door lock button
OTM048003
To unlock a door, push the door lock button (1) to the Unlock position. The red mark (2) on the door lock button will be visible.
To lock a door, push the door lock button (1) to the Lock position. If the door is locked properly, the red mark (2) on the door lock button will not be visible.
To open a door, pull the door handle (3) outward.
Front doors cannot be locked if the key is in the ignition switch and any front door is open.
Doors cannot be locked if the smart key is in the vehicle and any door is open.
05
5-33
Information If a power door lock ever fails to function while you are in the vehicle try one or more of the following techniques to exit: Operate the door unlock feature repeatedly (both electronic and manual) while simultaneously pulling on the door handle. Operate the other door locks and handles. Lower a front window and use the mechanical key to unlock the door from outside.
With the central door lock/unlock switch
OTM050215
When pressing the ( ) portion (1) on the switch, all vehicle doors will lock. If any door is opened, the doors will
not lock even though the lock button (1) of the central door lock switch is pressed.
If the smart key is in the vehicle and any door is opened, the doors will not lock even though the lock button (1) of the central door lock switch is pressed.
When pressing the ( ) portion (2) on the switch, all vehicle doors will unlock.
Convenient features
5-34
WARNING The doors should always be fully
closed and locked while the vehicle is in motion. If the doors are unlocked, the risk of being thrown from the vehicle in a crash is increased.
Do not pull the inner door handle of the drivers or passengers door while the vehicle is moving.
WARNING Do not leave children or animals unattended in your vehicle. An enclosed vehicle can become extremely hot, causing death or serious injury to unattended children or animals who cannot escape the vehicle. Children might operate features of the vehicle that could injure them, or they could encounter other harm, possibly from someone gaining entry to the vehicle.
WARNING Always secure your vehicle. Leaving your vehicle unlocked increases the potential risk to you or others from someone hiding in your vehicle. To secure your vehicle, while depressing the brake, shift the gear to the P (Park) position, engage the parking brake, and press the Engine Start/Stop button to the OFF position, close all windows, lock all doors, and always take the key with you.
CAUTION Opening a door when something is approaching may cause damage or injury. Be careful when opening doors and watch for vehicles, motorcycles, bicycles or pedestrians approaching the vehicle in the path of the door.
WARNING If you stay in the vehicle for a long time while the weather is very hot or cold, there are risks of injuries or danger to life. Do not lock the vehicle from the outside when someone is in the vehicle.
05
5-35
Auto door lock/unlock features Your vehicle is equipped with features that will automatically lock or unlock your vehicle based on settings you select in the infotainment system screen.
Auto LOCK Enable on speed When this feature is set in the infotainment system screen, all the doors will be locked automatically when the vehicle exceeds 9 mph (15 km/h).
Auto LOCK Enable on shift When this feature is set in the infotainment system screen, all the doors will be locked automatically when the vehicle is shifted out of P (Park) while the engine is running.
Auto UNLOCK On Shift to P When this feature is set in the infotainment system screen, all the doors will be unlocked automatically when the vehicle is shifted back into P (Park) while the engine is running.
Auto UNLOCK Vehicle off When this feature is set in the infotainment system screen, all the doors will be unlocked automatically when the vehicle is turned off.
See additional information in supplied Infotainment Manual.
Additional unlock safety feature air bag deployment As an additional safety feature, all doors will be automatically unlocked when an impact causes the air bags to deploy.
Child-protector rear door locks (if equipped)
OTM048005
The child safety lock is provided to help prevent children seated in the rear from accidentally opening the rear doors. The rear door safety locks should be used whenever children are in the vehicle. The child safety lock is located on the edge of each rear door. When the child safety lock is in the lock position, the rear door will not open if the inner door handle is pulled. To lock the child safety lock, insert a small flat blade tool (like a screwdriver or similar) (1) into the slot and turn it to the lock position as shown. To allow a rear door to be opened from inside the vehicle, unlock the child safety lock.
WARNING If children accidently open the rear doors while the vehicle is in motion, they could fall out of the vehicle. The rear door safety locks should always be used whenever children are in the vehicle.
Convenient features
5-36
Electronic child safety lock (if equipped)
OTM050084L
When the electronic child safety lock button is pressed and the indicator light on the button illuminates, the rear doors cannot be opened from inside the vehicle. The rear door window cannot be
opened or closed while the electronic child safety lock button is in the LOCK position (indicator light ON). For more details, refer to Windows section in this chapter.
Electronic child safety lock does not automatically turn on unless the driver presses the electronic child safety lock button.
If 3 minutes passes after the Engine Start/Stop button is pressed to the OFF or ACC, the indicator on the button turns off, and the driver cannot turn off electronic child safety lock by pressing the button. To turn off the function, press the Engine Start/Stop button to the ON position, and then press the electronic child safety lock button.
If the power is supplied again after removing the battery or battery is discharged while the electronic child safety lock button is in the LOCK position, press the button once more to match the state of the indicator on the electronic child safety lock button and actual status of the electronic child safety lock function.
If the airbag is activated while the electronic child safety lock button is in the LOCK position (indicator light ON), the rear doors will unlock automatically.
Vehicles equipped with the electronic child safety lock feature is not provided with a manual child safety lock.
WARNING If children accidentally opens the rear door while the vehicle is in motion, they could fall out of the vehicle. Electronic child safety lock should always be used whenever children are in the vehicle.
05
5-37
NOTICE Child safety lock failure / Child safety lock error Type A Type B
OJX1059018L OJX1059254L
When electronic child safety lock does not work even though the button is pressed, the message will be displayed and an alarm will sound. If this occurs, we recommend that the vehicle be inspected by an authorized HYUNDAI dealer.
Safe Exit Assist (if equipped with electronic child safety lock) Safe Exit Assist helps prevent the rear occupant from opening the rear door. When an approaching vehicle from the rear area is detected after the vehicle stops, the rear doors will not unlock even when the driver tries to unlock the rear doors using the electronic child safety lock button. For more details, refer to Safe Exit Assist (SEA) section in chapter 7.
Convenient features
5-38
This system helps to protect your vehicle and valuables. The horn will sound and the hazard warning lights will blink continuously if any of the following occur: - A door is opened without using the
smart key. - The liftgate is opened without using
the smart key. - The engine hood is opened.
The alarm continues for 30 seconds, then the system resets. To turn off the alarm, unlock the doors with the smart key. The Theft Alarm System automatically sets 30 seconds after you lock the doors and the liftgate. For the system to activate, you must lock the doors and the liftgate from outside the vehicle with the smart key or by touching the touch sensor on the outside of the door handle with the smart key in your possession. The hazard warning lights will blink and the chime will sound once to indicate the system is armed. Once the security system is set, opening any door, the liftgate, or the hood without using the smart key will cause the alarm to activate. The Theft Alarm System will not set if the hood, the liftgate, or any door is not fully closed. If the system will not set, check the hood, the liftgate, or the doors are fully closed. Do not attempt to alter this system or add other devices to it.
Information Do not lock the doors until all
passengers have left the vehicle. If the remaining passenger leaves the vehicle when the system is armed, the alarm will be activated.
If the vehicle is not disarmed with the smart key, open the doors by using the mechanical key and start the engine by directly pressing the Engine Start/Stop button with the smart key.
If the system is disarmed by unlocking the vehicle, but neither a door or the liftgate is opened within 30 seconds, the doors will relock and the system will rearm automatically.
Information
OHI038181L
Vehicles equipped with a theft alarm system will have a label attached to the vehicle with the following words: 1. WARNING 2. SECURITY SYSTEM
ThEFT-ALARm sYsTEm
05
5-39
OTM050087
Integrated Memory System for the drivers seat is provided to store and recall the following memory settings with a simple button operation. Drivers seat position Side View mirror position
WARNING Never attempt to operate the integrated memory system while the vehicle is moving. This could result in loss of control, and an accident causing death, serious injury, or property damage.
Information If the battery is disconnected, the
memory settings will be erased. If integrated memory system does not
operate normally, we recommend that you have the system inspected by an authorized HYUNDAI dealer.
Storing memory positions 1. Shift to P (Park) while the Engine
Start/Stop button is in the ON position.
2. Adjust the drivers seat position, side view mirror position, steering wheel position, instrument panel illumination intensity and head-up display height/brightness to the desired position.
3. Press the SET button. The system will beep once and notify you Press button to save settings on the cluster LCD display.
4. Press one of the memory buttons (1 or 2) within 4 seconds. The system will beep twice when the memory has been successfully stored.
5. Driver 1 (or 2) settings saved will appear on the cluster LCD display. The message appears only for the drivers seat position memory setting.
InTEgRATED mEmORY sYsTEm (IF EQUIppED)
Convenient features
5-40
Recalling memory positions 1. Shift to P (Park) while the Engine
Start/Stop button is in the ON position.
2. Press the desired memory button (1 or 2). The system will beep once, and then the drivers seat position, side view mirror position, steering wheel position, instrument panel illumination intensity and head-up display height/ brightness will automatically adjust to the stored positions.
3. Driver 1 (or 2) settings applied will appear on the cluster LCD display.
Information If you press the SET button or the
corresponding button which the setting is being recalled, the setting will temporarily deactivate. If you press the other buttons, the setting of the pressed button will activate. For example, if you press the SET button or number 1 button with the number 1 setting in operation, the setting will temporarily deactivate. If you press the number 2 button, the number 2 setting will activate.
If you adjust the seat, rearview mirror, steering wheel, instrument panel illumination or head-up display while recalling the stored positions, the pre- set settings will become ineffective.
Resetting the system Take the following procedures to reset integrated memory system, when it does not operate properly.
Resetting integrated memory system 1. Stop the vehicle and open the drivers
door with the Engine Start/Stop button in the ON position and the vehicle shifted to P (Park).
2. Adjust the drivers seat and seatback to the foremost position.
3. Press the SET button and push forward the drivers seat movement switch over 2 seconds simultaneously.
While resetting integrated memory system 1. Resetting starts with a notification
sound. 2. The drivers seat and seatback is
adjusted to the rearward position with the notification sound.
3. The drivers seat and seatback is re-adjusted to the default position (central position) with the notification sound.
However, in the following cases, the resetting procedure and the notification sound may stop. The memory button is pressed. The seat control switch is operated. The gear is shifted out of P (Park). The driving speed exceeds
2 mph (3km/h). The drivers door is closed.
05
5-41
NOTICE While integrated memory system
is being reset, if the resetting and notification sound stops incompletely, restart the resetting procedure again.
Make sure that there is no objects around the drivers seat in advance of resetting the integrated memory system.
Easy access function The system will move the drivers seat automatically as follows: With remote key
- It will move the drivers seat rearward when the ignition key is removed.
- It will move the drivers seat forward when the ignition key is inserted.
With smart key - It will move the drivers seat
rearward when the Engine Start/ Stop button is pressed to the OFF position.
- It will move the drivers seat forward when the Engine Start/Stop button is pressed to the ACC or START position.
You can activate or deactivate the Easy Access Function from the User Settings mode on the LCD display. Convenience SeatEasyAccessOff/Normal/ Extended.
For more details, refer to LCD Display In chapter 4.
CAUTION Driver should be cautious when using this function to assure no injury to passenger or child on the back seat. In case of emergency the driver has to stop movement of front seat (when easy access feature is activated) by pressing SET button or any of the driver seat control switches.
Convenient features
5-42
Electric Power Steering (EPS) The system assists you with steering the vehicle. If the vehicle is turned off or if the power steering system becomes inoperative, you may still steer the vehicle, but it will require increased steering effort. Should you notice any change in the effort required to steer during normal vehicle operation, we recommend that you have the system checked by an authorized HYUNDAI dealer.
CAUTION If Electric Power Steering does not operate normally, the warning light and the message Check motor driven power steering will illuminate on the instrument cluster. You may steer the vehicle, but it will require increased steering efforts. We recommend that you take your vehicle to an authorized HYUNDAI dealer or to a service station and have the system checked as soon as possible.
Information The following symptoms may occur during normal vehicle operation: The steering effort may be high
immediately after pressing the Engine Start/Stop button to the ON position. This happens as the system performs the EPS system diagnostics. When the diagnostics are completed, the steering wheel effort will return to its normal condition.
When the battery voltage is low, you might have to put more steering effort. However, it is a temporary condition so that it will return to normal condition after charging the battery.
A click noise may be heard from the EPS relay after the Engine Start/Stop button is in the ON or OFF position.
Motor noise may be heard when the vehicle is at a stop or at a low driving speed.
When you operate the steering wheel in low temperatures, abnormal noise may occur. If the temperature rises, the noise will disappear. This is a normal condition.
When an error is detected from EPS, the steering effort assist function will not be activated in order to prevent fatal accidents. Instrument cluster warning lights may be on or the steering effort may be high. If these symptoms occur, drive the vehicle to a safe area as soon as it is safe to do so. We recommend that you have the system checked by an authorized HYUNDAI dealer as soon as possible.
STEERING WHEEL
05
5-43
Tilt / Telescopic steering When adjusting the steering wheel to a comfortable position, adjust the steering wheel so that it points toward your chest, not toward your face. Make sure you can see the instrument cluster warning lights and gauges. After adjusting, push the steering wheel both up and down to be certain it is locked in position. Always adjust the position of the steering wheel before driving.
WARNING NEVER adjust the steering wheel while driving. This may cause loss of vehicle control resulting in an accident.
OTM050008
To adjust the steering wheel angle and height: 1. Pull down the lock-release lever (1). 2. Adjust the steering wheel to the
desired angle (2) and distance forward/back (3).
3. Pull up the lock-release lever to lock the steering wheel in place.
Information Sometimes the lock release lever may not engage completely. This may occur when the gears of the locking mechanism do not completely mesh. If this occurs, pull down on the lock-release lever, readjust the steering wheel again, and then pull back up on the release lever to lock the steering wheel in place.
Heated steering wheel (if equipped)
OTM050009
When the ignition switch is in the ON position or when the engine is running, press the heated steering wheel button to warm the steering wheel. The indicator on the button will illuminate. To turn the heated steering wheel off, press the button again. The indicator on the button will turn off.
Convenient features
5-44
Auto Comfort Control (for drivers seat) (if equipped) - The heated steering wheel
automatically controls the steering wheel temperature depending on the ambient temperature and the set climate control temperature when the engine is running. If the heated steering wheel switch is pushed, the heated steering wheel will have to be controlled manually. To use this function, it must be activated from the Settings menu in the AVN system screen.
- The heated steering wheel defaults to the OFF position whenever the ignition switch is ON. However, if the Auto Comfort Control function is ON, the heated steering wheel will turn on and off depending on the ambient temperature and the set climate control temperature.
For more details, we recommend that you contact an authorized HYUNDAI dealer.
Information The heated steering wheel will turn off automatically approximately 30 minutes after the heated steering wheel is turned on.
NOTICE Do not install any cover or accessory on the steering wheel. This cover or accessory could cause damage to the heated steering wheel system.
Horn
OTM050088
To sound the horn, press the area indicated by the horn symbol on your steering wheel (see illustration). The horn will operate only when this area is pressed.
NOTICE Do not strike the horn severely to operate it, or hit it with your fist. Do not press on the horn with a sharp-pointed object.
05
5-45
Inside rearview mirror Before driving your vehicle, check to see that your inside rearview mirror is properly positioned. Adjust the rearview mirror so that the view through the rear window is properly centered.
WARNING Make sure your line of sight is not obstructed. Do not place objects in the rear seat, cargo area, or behind the rear headrests which could interfere with your vision through the rear window.
WARNING To prevent serious injury during an accident or deployment of the air bag, do not modify the rearview mirror and do not install a wide mirror.
WARNING NEVER adjust the mirror while driving. This may cause loss of vehicle control resulting in an accident.
NOTICE When cleaning the mirror, use a paper towel or similar material dampened with glass cleaner. Do not spray glass cleaner directly on the mirror as this may cause the liquid cleaner to enter the mirror housing.
Electric Chromic Mirror (ECM) (if equipped)
OTM050019
[A] : Indicator
Some vehicles come equipped with an electrochromic mirror that helps control glare while driving at night or under low light driving conditions. When the engine is running, the glare is automatically controlled by the sensor mounted in the rearview mirror. The sensor detects the light level around the vehicle, and automatically adjusts to control the headlamp glare from vehicles behind you. Whenever the the gear is shifted to R (Reverse), the mirror will automatically go to the brightest setting in order to improve the drivers view behind the vehicle.
MIRRORS
Convenient features
5-46
Day/night rearview mirror (if equipped)
OTM050018
[A]: Day, [B]: Night
Make this adjustment before you start driving and while the day/night lever is in the day position. Pull the day/night lever towards you to reduce glare from the headlamps of the vehicles behind you during night driving. Remember that you lose some rearview clarity in the night position.
Electrochromic mirror (ECM) with HomeLink system (if equipped) Your vehicle may be equipped with a Gentex Automatic-Dimming Mirror with an Integrated HomeLink Wireless Control System. During nighttime driving, this feature will automatically detect and reduce rearview mirror glare. The HomeLink Universal Transceiver allows you to activate your garage door(s), electric gate, home lighting, etc.
OTMA050002
(1) HomeLink Channel 1 (2) HomeLink Channel 2 (3) HomeLink Channel 3 (4) Garage Door Opener Status Indicator:
Closing or Closed (5) HomeLink Operation Indicator (6) Garage Door Opener Status Indicator:
Opening or Opened (7) HomeLink User Interface Indicator
Automatic-Dimming Night Vision Safety (NVS) Mirror (if equipped) The NVS Mirror automatically reduces glare by monitoring light levels in the front and the rear of the vehicle. Any object that obstructs either light sensor will degrade the automatic dimming control feature. For more information regarding NVS mirrors and other applications, please refer to the Gentex website: www.gentex.com
Your mirror will automatically dim upon detecting glare from the vehicles traveling behind you. The mirror defaults to the ON position each time the vehicle is started.
05
5-47
Integrated HomeLink Wireless Control System The HomeLink Wireless Control System provides a convenient way to replace up to three hand held radio-frequency transmitters used to activate compatible devices such as gate operators, garage door openers, entry door locks, security systems, and home lighting.
NOTICE HomeLink operates while the ignition switch is in the ACC or ON position for safety reasons. It is to prevent unintentional security problems from happening when the vehicle is parked outside the garage.
WARNING Before programming HomeLink to a garage door opener or gate operator, make sure people and objects are out of the way of the device to prevent potential harm or damage. Do not use the HomeLink with any garage door opener that lacks the safety stop and reverse features required by U.S. federal safety standards (this includes any garage door opener model manufactured before April 1, 1982). A garage door that cannot detect an object - signaling the door to stop and reverse - does not meet current U.S. federal safety standards. Using a garage door opener without these features increases the risk of serious injury or death. For more information, contact HomeLink at www.homelink.com, or call Home-Link customer support at 1-800-355-3515. It is also recommended that a new battery be replaced in the handheld transmitter of the device being trained to HomeLink for quicker training and accurate transmission of the radio frequency.
1. Programming HomeLink
The following steps show how to program HomeLink. If you have any questions or are having difficulty programming your HomeLink buttons, refer to the HomeLink website or call the HomeLink customer support toll-free number. Do this before going back to the dealer who sold you the car. Visit the HomeLink website at: www.
homelink.com. Then at the top of the page, choose your vehicle make. Then watch the You Tube video, and/or access additional website information.
If you choose to access the website via your cell phone, scan the QR code.
Or call HomeLink customer support at 1-800-355-3515 (Please have the vehicle make/model and the opener device make/model readily available.)
Convenient features
5-48
1) Programming Preparation
OTMA050003
1. When programming a garage door opener, it is advised to park the vehicle outside of the garage.
2. It is recommended that a new battery be placed in the handheld transmitter of the device being programmed to HomeLink for quicker training and accurate transmission of the radio- frequency signal.
3. Place the ignition switch to the ACC (Accessory) position for programming of HomeLink.
2) Programming a New HomeLink
OTMA050004
1. Press and release the HomeLink button (1), (2) or (3), you would like to program. The HomeLink indicator light (7) will flash orange slowly (if not, perform the steps of Erasing HomeLink Buttons section, and start over).
OTMA050005
2. Position the garage door opener remote 1 3 inches (2 8cm) away from the HoleLink buttons.
3. While the HomeLink indicator light (7) is flashing orange, press and hold the hand-held remote button. Continue pressing the handheld remote button until the HomeLink indicator light (7) light changes from orange to green. You may now release the handheld remote button.
4. Wait until your garage door comes to a complete stop, regardless of position, before proceeding to the next steps.
5. Press and release the HomeLink button you are programming and observe the indicator light. If the indicator light remains solid
green, your device should operate when the HomeLink button is pressed. At this point, if your device operates, programming is complete.
If the indicator light rapidly flashes green, firmly press, hold for two seconds and release the HomeLink button up to three times in a row slowly to complete the programming process. Do not press the HomeLink button rapidly. At this point if your device operates, programming is complete. If the device does not operate, continue with step 6.
05
5-49
6. At the garage door opener motor, (security gate motor, etc.) locate the Learn, Smart, Set or Program button. This can usually be found where the hanging antenna wire is attached to the motor-head unit (see the devices manual to identify this button). The name and color of the button may vary by manufacturer.
ODL3A040504
A ladder and/or second person may simplify the following steps.
7. Firmly press and release the Learn, Smart, Set or Program button. You now have up to 30 seconds in which to complete the next step.
8. Return to the vehicle and firmly press, hold for two seconds and release, the HomeLink button up to three times in a row slowly. Do not press the HomeLink button rapidly. As soon as you see the garage door start to move, stop pressing any buttons until a few seconds after the garage door has come to a complete stop, regardless of position. At this point, programming is complete and your device should operate when the HomeLink button is pressed and released.
3) Two-Way Communication Programming (For select garage door openers)
If your garage door opener has the myQ logo on its side, your opener likely has Two-Way Communication capability. HomeLink has the capability to establish Two-Way Communication with your garage door opener. HomeLink can receive and display closing or opening status messages from compatible garage door openers. At any time, Home-Link can also recall and display the last recorded status communicated by the garage door opener to indicate your garage door being closed or opened. To check if your garage door opener is compatible with this feature, refer to www.homelink.com/compatible/Two- way-Communication. If your garage door opener has this functionality, AND the Two-Way Communication indicators (4), (6) in the mirror appear while the garage door is opening/closing, then no further steps are needed. Two-Way Communication Programming is already complete. However, if your garage door opener has this functionality, AND the Two-Way Communication indicators (4), (6) in the mirror DO NOT appear while the garage door is opening/closing, use the following instructions to enable this functionality. 1. In your vehicle, press and hold the
programmed HomeLink button for 2 seconds, then release. Confirm that the garage door is moving. AFTER it stops, you will have one minute to complete the following steps:
A ladder and/or second person may simplify the following steps.
Convenient features
5-50
2. On your garage door opener in your garage, locate the Learn button (usually near where the hanging antenna wire is attached to the garage door opener). If there is difficulty locating this button, reference the devices owners manual.
3. Press and release the Learn button. 4. A light on your garage door opener
may flash, and your Two-Way Communication indicators (4), (6) in your vehicle may flash, confirming completion of the process.
5. Return to the vehicle and firmly press and release the programmed HomeLink button to activate your garage door. The Two-Way Communication indicators (4), (6) flash in orange when the door is moving. Do not make any additional button presses until AFTER the garage door has come to a complete stop.
6. Your Two-Way Communication programming is now complete.
Information If your garage door opener has Two- Way Communication functionality, it is possible for HomeLink to stop functioning the garage door shortly after initial programming, IF the Two- Way Communication Programming wasnt properly completed. This usually happens after the first 10 times a programmed HomeLink button is pressed. If you experience this, completing the Programming a New HomeLink Button and Two-Way Communication Programming will restore door operation.
4) Canadian Programming Canadian radio-frequency laws require transmitter remote signals to time- out (or quit) after a couple seconds of transmission, which may not be long enough for HomeLink to pick up the signal during programming. If you live in Canada or you are having difficulties programming a gate operator or garage door opener by using the programming procedures, replace Programming a New HomeLink Button step 3 with the following: While the HomeLink indicator light (7) is flashing orange, press and release (cycle) your devices handheld remote every two seconds until the HomeLink indicator light (7) changes from orange to green. You may now release the hand-held remote button. Then proceed with Programming a New HomeLink Button step 4.
05
5-51
2. Operating HomeLink
1) Operating HomeLink
OTMA050004
1. Press and release the desired programmed HomeLink button (1, 2 or 3).
Information The HomeLink indicator (7) should light green, solid or flashing, and your programmed device should operate. If your device does not operate, the HomeLink programming was not successful, and youll need to reprogram the button.
2) Two-Way Communication Display Behavior
OTMA050006
1. Press and release one of the programmed HomeLink buttons (1, 2 or 3).
OTMA050007
2. The indicator (4) and (6) operates as below, if your garage door opener has Two-Way Communication functionality.
If the indicator (4) flashes in Orange, it indicates that the garage door is Closing.
The indicator (4) turns solid green once the garage door has closed.
If the indicator (6) flashes in Orange, it indicates that the garage door is Opening.
The indicator (6) turns solid green once the garage door has fully opened.
If the indicator (4) or (6) does not turn to green, it indicates that the last status of garage door was not received properly. The HomeLink mirror tries to receive the last known status of the garage door for a few seconds.
Convenient features
5-52
3) Recalling Garage Door Status HomeLink mirror with Two-Way Communication provides a way to view the last stored message from the garage door opener. In order to recall the last known status of the last activated device, press the buttons 1 and 2 OR 2 and 3 simultaneously. If the indicator (4) appears solid
Green, it indicates that the last activated device was closed properly.
If the indicator (6) appears solid Green, it indicates that the last activated device was open properly.
3. Erasing HomeLink Buttons 1) Erasing and Reprogramming a Single
HomeLink Button: 1. Press and hold the desired HomeLink
button you want to re-program. DO NOT release the button.
2. The HomeLink indicator light (7) will illuminate solid green. Release the button as soon as the HomeLink indicator light (7) begins to flash orange, usually about 20 seconds.
3. Proceed with the steps in the Programming a New HomeLink Button section.
Information If you do not complete the re- programming of a new device to the button, it will revert to the previously stored programming.
2) The following instructions will erase ALL HomeLink programming from ALL buttons:
OTMA050008
1. Press and hold the buttons (1) and (3) simultaneously.
2. The HomeLink indicator light (7) will illuminate solid Orange for about 10 seconds.
3. Release the buttons once the HomeLink indicator light (7) changes to Green and flashes rapidly.
4. Now all three HomeLink buttons (1), (2) and (3) are cleared of any programming.
Information HomeLink and the HomeLink House logo are registered trademarks of Gentex Corporation. The myQ logo is a registered trademark of The Chamberlain Group, Inc.
05
5-53
FCC (USA) and ISED (Canada) This device complies with FCC rules part 15 and Innovation, Science, and Economic Development Canada RSS- 210. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference that may be received including interference that may cause undesired operation. WARNING: The transmitter has been tested and complies with FCC and ISED rules. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the device. This equipment complies with FCC and ISED radiation exposure limits set forth for an uncontrolled environment. End Users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must be at least 20cm from the user and must not be co-located or operating in conjunction with any other antenna or transmitter.
FCC (Htats-Unis) et ISED (Canada) Cet appareil est conforme aux rglements de la FCC, section 15, et au CNR-210 dInnovation, Sciences et Dhveloppement conomique Canada. Le fonctionnement est assujetti aux deux conditions suivantes : (1) cet appareil ne doit pas causer dinterfrences nuisibles et (2) cet appareil doit accepter toute interfrence reue, y compris celle qui pourrait entraner un dysfonctionnement. MISE EN GARDE : Lmetteur a subi des tests et est conforme aux rglements de la FCC et dISDE. Les changements ou modifications non approuvs explicitement par la partie responsable de la conformit pourraient rendre caduque lautorisation de lutilisateur de se servir du dispositif. Cet appareil est conforme aux limites dexposition aux radiations de la FCC et dISDE tablies pour un environnement non contrl. Les utilisateurs finaux doivent respecter les instructions dutilisation spcifiques pour satisfaire aux exigences de conformit aux expositions de RF. Lmetteur doit se trouver 20 cm au minimum de lutilisateur et ne doit pas tre situ au mme endroit que tout autre metteur ou antenne ni fonctionner avec un autre metteur ou antenne.
Mjico La operacin de este equipo est sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo pueda no causar interferencia daina, y (2) este dispositivo o dispositivos deben aceptar cualquier interferencia, que incluye la interferencia que puede causar su operacin no deseada.
Convenient features
5-54
HomeLink 5 Programing Flow Chart
OOS040475N
05
5-55
Side View mirrors
OTM048015
Your vehicle is equipped with both left- hand and right-hand side view mirrors. The mirrors can be adjusted remotely with the mirror adjustment control switch. The side view mirrors can be folded to help prevent damage when going through an automatic car wash or when passing through a narrow street. The right side view mirror is convex. Objects seen in the mirror are closer than they appear. Use the inside rear view mirror or look back directly to determine the actual distance of other vehicles prior to changing lanes. Make sure to adjust the side view mirrors to your desired position before you begin driving.
WARNING Do not adjust or fold the side view mirrors while driving. This may cause loss of vehicle control resulting in an accident.
NOTICE Do not scrape ice off the mirror face;
this may damage the surface of the glass.
If the mirror is jammed with ice, do not adjust the mirror by force. Use an approved spray de-icer (not radiator antifreeze) spray, or a sponge or soft cloth with very warm water, or move the vehicle to a warm place and allow the ice to melt.
Do not clean the mirror with harsh abrasives, fuel or other petroleum based cleaning products.
Convenient features
5-56
Adjusting the side view mirrors
OTM050089
1. Move the lever (1) either to the L (left side) or R (right side) to select the side view mirror you would like to adjust.
2. Use the mirror adjustment control (2) to position the selected mirror up, down, left or right.
3. After adjustment, move the lever (1) to the middle to prevent inadvertent adjustment.
NOTICE The mirrors stop moving when
they reach the maximum adjusting angles, but the motor continues to operate while the switch is pressed. Do not press the switch longer than necessary, because this can damage the motor.
Do not attempt to adjust the side view mirrors by hand, because this can damage the motor.
Folding the side view mirror
OTM048430L
Manual type To fold the side view mirror, grasp the housing of the mirror and then fold it toward the rear of the vehicle.
OTM050090
Electric type The side view mirror can be folded or unfolded by pressing the switch.
05
5-57
IfConvenienceWelcomemirror/ lightOndoorunlockisselectedin the User Settings mode on the LCD display, the outside mirror will fold or unfold automatically as follows: - The mirror will fold or unfold when
the door is locked or unlocked by the smart key.
- The mirror will fold or unfold when the door is locked or unlocked by the button on the outside door handle.
IfConvenienceWelcome mirror/lightOndoorunlockand ConvenienceWelcomemirror/light Ondriverapproachisselectedin the User Settings mode on the LCD display, the outside mirror will unfold automatically when you approach the vehicle (all doors closed and locked) with a smart key in possession.
NOTICE The electric type side view mirror operates even though the ignition switch is in the OFF position. However, to prevent unnecessary battery discharge, do not adjust the mirrors longer than necessary while the engine is not running.
NOTICE Do not fold the electric type side view mirror by hand. It could cause motor failure.
Reverse parking aid (if equipped)
OTM050020
When the gear is shifted to the R (Reverse) position, the side view mirror(s) will rotate downwards to aid with driving in reverse. The position of the side view mirror switch (1) determines whether or not the mirrors will move: Left/Right : When either the L (Left) or
R (Right) switch is selected, both side view mirrors will move.
Neutral : When neither switch is selected, the outside rearview mirrors will not move.
The side view mirrors will automatically revert to their original positions if any of the following occur: The Engine Start/Stop button is
pressed to either the OFF position or the ACC position.
The gear is shifted to any position except R (Reverse).
The side view mirror adjustment button is not selected.
Convenient features
5-58
OTMA050018
WINDOWS
(1) Drivers door power window switch (2) Front passengers door power
window switch* (3) Rear door (left) power window
switch* (4) Rear door (right) power window
switch*
(5) Window opening and closing (6) Automatic power window* (7) Power window lock switch
* : if equipped
05
5-59
Power windows The ignition switch must be in the ON position to be able to raise or lower the windows. Each door has a Power Window switch to control that doors window. The driver has a Power Window Lock switch which can block the operation of passenger windows. The power windows will operate for approximately 3 minutes after the ignition switch is placed in the ACC or OFF position. However, if the front doors are opened, the Power Windows cannot be operated even within the 3 minutes period.
Window opening and closing
OTM050213
To open: Press the window switch down to the first detent position (5). Release the switch when you want the window to stop.
To close: Pull the window switch up to the first detent position (5). Release the window switch when you want the window to stop.
Auto up/down window (if equipped) Pressing or pulling up the power window switch momentarily to the second detent position (6) completely lowers or lifts the window even when the switch is released. To stop the window at the desired position while the window is in operation, pull up or press down and release the switch.
Resetting the power windows If the power windows do not operate normally, the automatic power window system must be reset as follows: 1. Press the ignition switch to the ON
position. 2. Close the window and continue
pulling up on the power window switch for at least one second.
If the power windows do not operate properly after resetting, we recommend that the system be inspected by an authorized HYUNDAI dealer.
Convenient features
5-60
Automatic reverse (if equipped)
OTM050091
If a window senses any obstacle while it is closing automatically, it will stop and lower approximately 12 in. (30 cm) to allow the object to be cleared. If the window detects the resistance while the power window switch is pulled up continuously, the window will stop upward movement then lower approximately 1 in. (2.5 cm). If the power window switch is pulled up continuously again within 5 seconds after the window is lowered by the automatic window reverse feature, the automatic window reverse will not operate.
Information The automatic reverse feature is only active when the Auto Up feature is used by fully pulling up the switch to the second detent.
NOTICE Do not install any accessories on the windows. The automatic reverse feature may not operate.
WARNING Make sure body parts or other objects are safely out of the way before closing the windows to avoid injuries or vehicle damage. Objects less than 0.16 in (4 mm) in diameter caught between the window glass and the upper window channel may not be detected by the automatic reverse window and the window will not stop and reverse direction.
Power window lock button
OTM050092L
The driver can disable the power window switches on the rear passenger doors by pressing the power window lock button. When the power window lock button is pressed: The drivers master control can
operate all the power windows. The front passengers control can
operate the front passengers power window.
The rear passengers control cannot operate the rear passengers power window.
05
5-61
If the power window lock button is operated (indicator turns on), rear passenger cannot open the rear door (if equipped with the Electronic Child Safety Lock System).
For more details, refer to Electronic Child Safety Lock System system in this chapter.
WARNING Do not allow children to play with the power windows. Keep the drivers door power window lock button in the LOCK position. Serious injury or death can result from unintentional window operation by a child.
NOTICE To prevent possible damage to the
power window system, do not open or close two windows or more at the same time. This will also ensure the longevity of the fuse.
Never try to operate the main switch on the drivers door and the individual door window switch in opposite directions at the same time. If this is done, the window will stop and cannot be opened or closed.
Convenient features
5-62
If your vehicle is equipped with a sunroof, you can slide or tilt your sunroof with the sunroof control switch located on the overhead console.
OTM050226L
The ignition switch must be in the ON position before you can open or close the sunroof. The sunroof can be operated for approximately 3 minutes after the Engine Start/Stop button is in the ACC or LOCK (OFF) position. However, if the front door is opened, the sunroof cannot be operated even within the 3 minute period.
Information In cold and wet climates, the sunroof
may not work properly due to freezing conditions.
After the vehicle is washed or in a rainstorm, be sure to wipe off any water that is on the sunroof before operating it.
WARNING Never adjust the sunroof or sunshade
while driving. This could result in loss of control and an accident that may cause, serious injury, or property damage.
Make sure heads, hands, arms or any other body parts or objects are out of the way before operating the sunroof.
Do not extend your head, arms or body outside the sunroof while driving, to avoid serious injury.
Do not leave the engine running and the key in your vehicle with unsupervised children. Unattended children could operate the sunroof, which could result in serious injury.
Do not sit on the top of the vehicle. It may cause injury or vehicle damage.
Do not operate the sunroof while using the roof rack to transport cargo. This may cause the cargo to come loose and distract the driver.
Do not extend any luggage outside the sunroof while driving.
NOTICE Do not continue to move the sunroof
control switch after the sunroof is fully opened, closed, or tilted. Damage to the motor or system components could occur.
Make sure the sunroof is closed fully when leaving your vehicle. If the sunroof is left open, rain or snow may wet the interior of the vehicle. Also, leaving the sunroof open when the vehicle is unattended may invite theft.
pAnORAmIC sUnROOF (IF EQUIppED)
05
5-63
Sunshade
OTM050023
To open the sunshade: Pull the sunroof control switch backward to the first detent position.
To close the sunshade: Push the sunroof control switch forward to the first detent position.
To stop the sunshade at the desired position while the sunroof is operating, push the sunroof control switch backward or forward and release the control switch.
Information Activating the control switch to the first
detent requires only a very light touch. Wrinkles formed on the sunshade as
material characteristic are normal.
CAUTION Do not pull or push the sunshade by hand as such action may damage the sunshade or cause it to malfunction.
Sliding the sunroof
OTM050024
When the sunshade is closed: If you pull the sunroof control switch backward past the second detent, the sunshade will slide all the way open and then the sunroof glass will slide all the way open.
When the sunshade is opened: If you pull the sunroof control switch backward, the sunroof glass will slide all the way open.
To stop the sunroof at the desired position while the sunroof is operating, push the sunroof control switch backward or forward and release the control switch.
Information Only the front glass of the sunroof opens and closes.
Convenient features
5-64
Tilting the sunroof
OTM050025
When the sunshade is closed: If you push the sunroof control switch upwards, the sunshade will slide all the way open and then the sunroof glass will tilt open.
When the sunshade is opened: If you push the sunroof control switch upwards, the sunroof glass will tilt open.
To stop the sunroof at the desired position while the sunroof is operating, push the sunroof control switch backward or forward and release the control switch.
Closing the sunroof
OTM050027
To close the sunroof glass: Push the sunroof control switch forward to the first detent position.
To close the sunroof glass and sunshade: Push the sunroof control switch forward to the second detent position. The sunroof glass will close, then the sunshade will close automatically.
To stop the sunroof at the desired position while the sunroof is operating, push the sunroof control switch backward or forward and release the control switch.
CAUTION Close the sunroof when driving in dusty environments. Dust may cause a malfunction of the vehicle system.
05
5-65
Automatic reverse
ODH043039
If the sunroof senses any obstacle while it is closing automatically, it will reverse direction then stop to allow the object to be cleared. The auto reverse function does not work if a small obstacle is between the sliding glass and the sunroof sash. You should always check that all passengers and objects are away from the sunroof before closing it.
WARNING Small objects that can get caught
between the sunroof glass and the front glass channel may not be detected by the automatic reverse system. In this case, the sunroof glass will not detect the object and reverse direction.
Make sure heads, other body parts or other objects are safely out of the way before closing the sunroof to avoid injuries or vehicle damage.
WARNING In order to prevent accidental
operation of the sunroof, especially by a child, do not let a child operate the sunroof.
Do not sit on the top of the vehicle. It may cause vehicle damage.
NOTICE Periodically remove any dirt that may
accumulate on the sunroof guide rail or between the sunroof and roof panel which can make a noise.
Do not try to open the sunroof when the temperature is below freezing or when the sunroof is covered with snow or ice, otherwise the motor could be damaged. In cold and wet climates, the sunroof may not work properly.
Resetting the sunroof In some circumstances resetting the sunroof operation may need to be performed. Some instances where resetting the sunroof may be required include: - When the 12V battery is either
disconnected or discharged - When the sunroof fuse is replaced - If the sunroof one-touch AUTO OPEN/
CLOSE operation is not functioning properly
Sunroof resetting procedure: 1. It is recommended to perform the
reset procedure with the vehicle engine running. Start the vehicle in P (Park).
2. Make sure the sunshade and sunroof is in the fully closed position. If the sunshade and sunroof is open, push the control switch forward until the sunshade and sunroof is fully closed.
3. Release the control switch when the sunshade and sunroof is fully closed.
4. Push the control switch forward about 10 seconds until the sunroof moves slightly.
5. Release the control switch.
Convenient features
5-66
6. Within 3 seconds, push and hold the control switch forward until the sunshade and sunroof operates as follows: SunshadeOpenGlassOpenGlass CloseSunshadeClose
Do not release the switch until the operation is completed. If you release the control switch during operation, start the procedure again from step 2.
7. Release the sunroof control switch after all steps have completed. The sunroof system has been reset.
Information If the sunroof is not reset when the vehicle battery is disconnected or discharged, or the sunroof fuse is blown, the sunroof may not operate normally. For more detailed information, we recommend that you contact an authorized HYUNDAI dealer.
Sunroof open warning
OTM048118
If the driver turns off the engine when the sunroof is not fully closed, the warning chime will sound for a few seconds and the sunroof open warning will appear on the LCD display.
If the driver turns off the engine and opens the door when the sunroof is not fully closed, the open sunroof warning will appear on the LCD display until the door is closed or the sunroof is fully closed.
Close the sunroof securely when leaving your vehicle.
05
5-67
Hood Opening the hood
OTM050032
1. Park the vehicle and set the parking brake.
2. Pull the release lever to unlatch the hood. The hood should pop open slightly.
OTM050069
3. Go to the front of the vehicle, raise the hood slightly, push up the secondary latch (1) inside of the hood center and lift the hood. After the hood has been lifted halfway, it will raise completely by itself.
Closing the hood 1. Before closing the hood, check in and
around the engine compartment to ensure the following: - Any tools or other loose objects
are removed from the engine room area or hood opening area
- All glove, rags, or other combustible material is removed from the engine compartment
- All filler caps are tightly and correctly installed
2. Lower the hood halfway (lifted approximately 12 in. (30 cm) from the closed position) and push down to securely lock in place. Then double check to be sure the hood is secure. If the hood can be raised slightly, it is not securely locked. Open it again and close it with more force.
WARNING Before closing the hood, ensure
all obstructions are removed from around the hood opening.
Always double check to be sure that the hood is firmly latched before driving away. Check there is no hood open warning light or message displayed on the instrument cluster. Driving with the hood opened may cause a total loss of visibility, which might result in an accident.
Do not move the vehicle with the hood in the raised position, as vision is obstructed, which might result in an accident, and the hood could fall or be damaged.
ExTERIOR FEATURES
Convenient features
5-68
Liftgate Opening the liftgate
OTM050047
Make sure the vehicle is in P (Park) and set the parking brake. Then do one of the following: 1. Unlock all doors with the Door Unlock
button on your remote key or smart key. Press the liftgate handle button and open the liftgate.
2. Press and hold the liftgate open button on the remote key or smart key. Press the liftgate handle button and open the liftgate.
3. With the Smart Key in your possession, press the liftgate handle button and open the liftgate.
Closing the liftgate
OTM050038
Lower the liftgate lid and press down until it locks. To be sure the liftgate lid is securely fastened, always check by trying to pull it up again without pressing the liftgate handle button.
WARNING Always keep the liftgate lid completely closed while the vehicle is in motion. If it is left open or ajar, poisonous exhaust gases containing carbon monoxide (CO) may enter the vehicle and serious illness or death may result.
NOTICE To prevent damage to the liftgate lift cylinders and the attached hardware, always close the liftgate before driving.
Information In cold and wet climates, liftgate lock and liftgate mechanisms may not work properly due to freezing conditions.
05
5-69
WARNING
OTM050041
Do not hold the part (gas lifter) that supports the liftgate. Be aware that the deformation of the part may cause vehicle damage and a risk of injury.
WARNING NEVER allow anyone to occupy the
luggage compartment of the vehicle at any time. If the liftgate is partially or totally latched and the person is unable to get out, serious injury or death could occur due to lack of ventilation, exhaust fumes and rapid heat build-up, or because of exposure to cold weather conditions. The luggage compartment is also a highly dangerous location in the event of a crash because it is not a protected occupant space but is a part of the vehicles crush zone.
Your vehicle should be kept locked and keys should be kept out of the reach of children. Parents should teach their children about the dangers of playing in luggage compartments.
Emergency liftgate safety release
OTM050042
Your vehicle is equipped with the emergency liftgate safety release lever located on the bottom of the liftgate. When someone is inadvertently locked in the luggage compartment. The liftgate can be opened by doing as follows: 1. Remove the cover. 2. Push the release lever to the right by
a key. 3. Push up the liftgate.
WARNING For emergencies, be fully aware
of the location of the emergency liftgate safety release lever in the vehicle and how to open the liftgate if you are accidentally locked in the luggage compartment.
No one should be allowed to occupy the luggage compartment of the vehicle at any time. The luggage compartment is a very dangerous location in the event of a crash.
Use the release lever for emergencies only. Use with extreme caution, especially while the vehicle is in motion.
Convenient features
5-70
Power liftgate (if equipped) The power liftgate open/close button automatically opens and closes the liftgate.
Before using the power liftgate The power liftgate operates when the gear is in P (Park) with the Engine Start/ Stop button in the ON position. However, the liftgate will operate regardless of the gear position when the engine is off. For safety, before attempting to open or close the liftgate, make sure the vehicle is in P (Park).
WARNING Never leave children unattended
in your vehicle. Children might operate the power liftgate. Doing so could result in injury to themselves or others, and could damage the vehicle.
Make sure there are no people or objects around the liftgate before operating the power liftgate. Wait until the liftgate is opened fully and stopped before loading or unloading cargo or passengers from the vehicle.
NOTICE Do not close or open the power liftgate manually. This may cause damage to the power liftgate. If it is necessary to close or open the power liftgate manually when the battery is discharged or disconnected, do not apply excessive force.
Opening the power liftgate
OTM050046
The power liftgate will open automatically by doing one of the following: Press the liftgate button on the
remote key or smart key for approximately one second.
OTM050050
Press the power liftgate button for approximately one second.
For emergency stop while operating, press the power liftgate button shortly.
05
5-71
OTM050036
Press the liftgate handle switch (1) carrying the smart key with you.
If all door is unlock, you can open the liftgate without the smart key.
Closing the power liftgate
OTM050046
Press the power liftgate button for approximately one second when the liftgate is opened. The liftgate will close automatically.
For emergency stop while operating, press the power liftgate button shortly.
OTM050049
Press the power liftgate inner button when the liftgate is opened. The liftgate will close automatically.
Convenient features
5-72
Automatic reverse
OTM050053
During power opening or closing if the power liftgate senses any obstacle, the power liftgate will stop and move in the opposite direction. The auto reverse function may not work if objects are too soft or thin, or if the liftgate is almost fully closed near the latched position. Caution should be taken to prevent any objects from obstructing the liftgate opening. If the automatic reverse feature operates more than two times while attempting to open or close the liftgate, the power liftgate may stop at that position.
WARNING Never intentionally place any object or part of your body in the path of the power liftgate to make sure the automatic reverse function operates.
NOTICE Do not put heavy objects on the power liftgate before you operate the power liftgate. Additional weight may damage the operation of the system.
Non-operating conditions of the power liftgate The power liftgate does not open
when the vehicle is in motion. The chime will sound if you drive with the liftgate opened. Stop your vehicle immediately at a safe place and check if your liftgate is opened.
Operating the power liftgate more than 5 times continuously could cause damage to the operating motor. If this occurs, the power liftgate system enters into thermal protection mode to prevent the motor from overheating. In thermal protection mode, the power liftgate will not operate. If any of the power liftgate buttons are pressed to try to open the liftgate, the chime will sound 3 times but the liftgate will not operate. Allow the power liftgate system to cool for about 1 minute before operating the system again.
05
5-73
Resetting the power liftgate
OTM050222L
If the battery has been discharged or disconnected, or if the power liftgate fuse has been replaced or removed, reset the power liftgate by performing the following procedure: 1. Put the gear in P (Park). 2. Press the power liftgate inner button
(B) and the power liftgate handle switch (A) simultaneously for more than 3 seconds. The chime will sound.
3. Close the liftgate manually. If the power liftgate does not work properly after the above procedure, we recommend that the system be checked by an authorized HYUNDAI dealer.
Information If the power liftgate does not operate normally, check again if the gear position is in right position.
WARNING
OTM050041
Do not hold on to or try to pull on the liftgate strut. Be aware that the deformation of the liftgate strut may cause vehicle damage and risk of injury.
Setting the power liftgate Power liftgate opening speed To adjust the power liftgate opening speed, go to User Settings mode and selectDoorPowerliftgateOpening SpeedFast/NormalontheLCDdisplay. - If power liftgate function turns off,
you can not adjust the power liftgate speed.
- Initial speed of Power liftgate is set as Fast.
Convenient features
5-74
Power liftgate opening height
OTM050049
The driver may set the height of a fully opened liftgate by following the below instruction. 1. Position the liftgate manually to the
height you prefer. 2. Press the power liftgate inner switch
for more than 3 seconds. 3. Close the liftgate manually after
hearing the buzzer sound.
The liftgate will open to the height the driver has set up.
WARNING Always keep the liftgate completely closed while the vehicle is in motion. If it is left open or ajar, poisonous exhaust gases containing carbon monoxide (CO) may enter the vehicle and serious illness or death may result.
WARNING Occupants should never ride in the rear cargo area where no restraints are available. To avoid injury in the event of an accident or sudden stops, occupants should always be properly restrained.
Emergency liftgate safety release
OTM050042
Your vehicle is equipped with the emergency liftgate safety release lever located on the bottom of the liftgate inside the vehicle. To unlock and open the liftgate manually from inside the luggage compartment, perform the following procedure: 1. Remove the cover. 2. Push the release lever to the right. 3. Push the liftgate outward and upward.
WARNING Be aware of the location of the
emergency liftgate safety release lever in your vehicle and know how to open the liftgate using the safety release lever.
No one should be allowed to occupy the luggage compartment of the vehicle at any time. The luggage compartment is a very dangerous location in the event of a crash.
Use the release lever for emergencies only. Use extreme caution, especially while the vehicle is in motion.
05
5-75
Smart liftgate (if equipped)
OTM050056
On a vehicle equipped with a smart key, the liftgate can be opened with hands- free activation using the smart liftgate system.
Using smart liftgate The hands-free smart liftgate system can be opened automatically when the following conditions are met: The smart liftgate option is enabled in
the Settings menu in the infotainment system screen.
The smart liftgate is activated and ready 15 seconds after all the doors are closed and locked.
The smart liftgate will open when the smart key is detected in the area behind the vehicle for 3 seconds.
Information The smart liftgate will NOT operate when: A door is not locked or closed. The smart key is detected within
15 seconds from when the doors were closed and locked.
The smart key is detected within 15 seconds after the doors are closed and locked, and within 60 in. (1.5 m) from the front door handles. (for vehicles equipped with Welcome Light).
The smart key is in the vehicle.
1. Settings To activate the Smart Liftgate, go to User Settings Mode and select Smart Liftgate on the LCD display.
2. Detect and Alert The smart liftgate detecting area extends approximately 20~40 in. (50~100 cm) behind the vehicle. If you are positioned in the detecting area and are carrying the smart key, the hazard warning lights will blink and the chime will sound to alert you that the smart liftgate will open.
Convenient features
5-76
Information Do not approach the detecting area if you do not want the liftgate to open. If you have unintentionally entered the detecting area and the hazard warning lights and chime starts to operate, move away from the area behind the vehicle with the smart key. The liftgate will remain closed.
3. Automatic opening After the hazard warning lights blink and the chime sounds 6 times, the smart liftgate will open.
Deactivating smart liftgate Type A Type B
OTMA050009 OTMA050010
1. Door lock 2. Door unlock 3. Liftgate open (Liftgate)
Liftgate open / close (Power liftgate)
If you press any button on the smart key during the Detect and Alert stage, the smart liftgate will be deactivated. Make sure to be aware of how to deactivate the smart liftgate for emergency situations. If you press the door unlock button
(2), the smart liftgate will be deactivated temporarily. But, if you do not open any door for 30 seconds, the smart liftgate will be activated again.
If you press the liftgate open button (3) for more than 1 second, the liftgate opens.
The smart liftgate will still be activated if you press the door lock button (1) or liftgate open/close button (3) on the smart key as long as the smart liftgate is not already in the Detect and Alert stage.
In case you have deactivated the smart liftgate by pressing the smart key button and opened a door, the smart liftgate can be activated again by closing and locking all doors.
05
5-77
Detecting area
OTM050060
The smart liftgate detecting area extends approximately 20~40 in. (50~100 cm) behind the vehicle. If you are positioned in the detecting area and are carrying the smart key, the hazard warning lights will blink and the chime will sound for about 3 seconds to alert you that the liftgate will open.
The alert stops once the smart key is moved outside of the detecting area within the 3 second period.
Information Smart liftgate may not operate
properly if any of the following occur: - The smart key is close to a radio
transmitter such as a radio station or an airport which can interfere with normal operation of the transmitter.
- The smart key is near a mobile two way radio system or a mobile phone.
- Another vehicles smart key is being operated close to your vehicle.
Smart liftgate detecting area may change when: - The vehicle is parked on an incline
or slope. - One side of the vehicle is raised or
lowered relative to the opposite side.
Fuel filler door Opening the fuel filler door
OTM050063L
1. Turn the engine off. 2. Ensure Drivers door is unlocked. 3. Press the rear center edge of the fuel
filler door.
OTM048041
4. Pull the fuel filler door (1) outward to access the fuel tank cap.
5. To remove the fuel tank cap (2), turn it counterclockwise. You may hear a hissing noise as the pressure inside the tank equalizes.
6. Place the cap on the fuel filler door.
Convenient features
5-78
Information The fuel filler door will unlock when Drivers door is unlocked. To unlock fuel filler door: Press the unlock button on your smart
key Press the Central Door unlock button
on armrest trim of drivers door
The fuel filler door will lock when Drivers door is locked. To lock fuel filler door: Press the lock button on your smart key Press the Central Door lock button on
armrest trim of drivers door All doors will automatically lock after the vehicle speed exceeds 9 mph. Fuel filler door is also locked when vehicle speed exceeds 9 mph.
Information If the fuel filler door does not open because ice has formed around it, tap lightly or push on the door to break the ice and release the door. Do not pry on the door. If necessary, spray around the door with an approved deicer fluid (do not use radiator antifreeze) or move the vehicle to a warm place and allow the ice to melt.
Closing the fuel filler door 1. To install the fuel tank cap, turn it
clockwise until it clicks one time. 2. Close the fuel filler door until it is
latched securely.
Information Make the vehicle door to LOCK position and the fuel filler door completely closed in order to lock the fuel filler door. If the fuel filler door is not completely closed, the fuel filler door will not be locked.
CAUTION Keep the door into LOCK position when the vehicle is being washed (i.e. high pressure washer, automatic car washer, etc.)
WARNING Automotive fuel is highly flammable and explosive. Failure to follow these guidelines may result in SERIOUS INJURY or DEATH: Read and follow all warnings posted
at the gas station. Before refueling, note the location
of the Emergency Fuel Shut-Off, if available, at the gas station.
Before touching the fuel nozzle, you should eliminate the potential build- up of static electricity by touching a metal part of the vehicle, a safe distance away from the fuel filler neck, nozzle, or other gas source, with your bare hand.
Do not use mobile phones while refueling. Electric current and/or electronic interference from cellular phones can potentially ignite fuel vapors and cause a fire.
05
5-79
Do not get back into a vehicle once you have begun refueling. You can generate a buildup of static electricity by touching, rubbing or sliding against any item or fabric capable of producing static electricity. Static electricity discharge can ignite fuel vapors causing a fire. If you must re-enter the vehicle, you should once again eliminate potentially dangerous static electricity discharge by touching a metal part of the vehicle, away from the fuel filler neck, nozzle or other fuel source, with your bare hand.
When using an approved portable fuel container, be sure to place the container on the ground prior to refueling. Static electricity discharge from the container can ignite fuel vapors causing a fire. Once refueling has begun, contact between your bare hand and the vehicle should be maintained until the filling is complete.
Use only approved portable plastic fuel containers designed to carry and store fuel.
When refueling, always shift the gear to the P (Park) position, set the parking brake, and press the Engine Start/Stop button to the OFF position. Sparks produced by electrical components related to the engine can ignite fuel vapors causing a fire.
Do not use matches or a lighter and do not smoke or leave a lit cigarette in your vehicle while at a gas station, especially during refueling.
Do not over-fill or top-off your vehicle tank, which can cause fuel spillage.
If a fire breaks out during refueling, leave the vicinity of the vehicle, and immediately contact the manager of the gas station and then contact the local fire department. Follow any safety instructions they provide.
If pressurized fuel sprays out, it can cover your clothes or skin and thus subject you to the risk of fire and burns. Always remove the fuel cap carefully and slowly. If the cap is venting fuel or if you hear a hissing sound, wait until the condition stops before completely removing the cap.
Always check that the fuel cap is installed securely to prevent fuel spillage in the event of an accident.
Information Make sure to refuel your vehicle according to the Fuel Requirements section in suggested in chapter 1.
NOTICE Do not spill fuel on the exterior
surfaces of the vehicle. Any type of fuel spilled on painted surfaces may damage the paint.
If the fuel filler cap requires replacement, we recommend that you use only a genuine HYUNDAI cap or the equivalent specified for your vehicle. An incorrect fuel filler cap can result in a serious malfunction of the fuel system or emission control system.
Convenient features
5-80
OTMA050019
The Head-Up Display is an optional feature that allows the driver to view information projected onto a transparent screen while still keeping your eyes safely on the road ahead while driving.
Head-up display settings
OIK047152N
Head-up display can be enabled from the Settings menu in the User Settings mode on the instrument cluster LCD display. Select: - SetupHead-UpDisplayEnable
Head-Up Display After turning on the head-up
display, you can change the settings of Display Height and Content Selection of the Head-Up Display.
Head-up display information
OTMA050016
1. Turn by Turn (TBT) navigation 2. Traffic 3. Speedometer 4. SCC set speed 5. SCC Vehicle distance 6. Highway Driving Assist 7. Lane Following Assist 8. Lane Safety 9. Blind-Spot Safety 10. Highway Auto Speed Change
Information If you select Turn By Turn (TBT) navigation information as Head-Up Display contents, the Turn By Turn (TBT) navigation information will not be displayed in the instrument cluster LCD display.
hEAD-Up DIspLAY (hUD) (IF EQUIppED)
05
5-81
Precautions while using the head-up display It may sometimes be difficult to read
information on the Head-Up Display in the following situations. - The driver is improperly positioned
in the drivers seat - The driver wears polarizing-filter
sunglasses - An object is located above the
head-up display cover - The vehicle is driven on a wet road - Any improper lighting accessory is
installed inside the vehicle, or there is incoming light from outside of the vehicle
- The driver wears glasses - The driver wears contact lenses
When it is difficult to read the Head- Up Display information, adjust the image height or brightness level from the Settings menu in the infotainment system screen.
For your safety, make sure to stop the vehicle before adjusting the settings.
Do not tint the front windshield glass or add other types of metallic coating. Otherwise, the Head-Up Display image may be invisible.
Do not place any accessories on the crash pad or attach any objects on the windshield glass.
When replacing the front windshield glass, replace it with a windshield glass designed for Head-Up Display operation. Otherwise, duplicated images may be displayed on the windshield glass.
WARNING Blind-Spot Collision Warning warnings on the Head-Up Display are supplemental. Do not solely depend on them to change lanes. Always take a look around before changing lanes.
Convenient features
5-82
Exterior lights Lighting control To operate the lights, turn the knob at the end of the control lever to one of the following positions:
OAD045402
1. OFF position 2. AUTO headlamp position 3. Position lamp position 4. Headlamp position
Daytime Running Light (DRL) The Daytime Running Lights (DRL) can make it easier for others to see the front of your vehicle during the day, especially after dawn and before sunset.
The DRL system will turn the dedicated lamp OFF when : The headlamps are ON. The parking brake is applied. The vehicle is turned off.
OTM050098
AUTO headlamp position The position lamp and headlamp will be turned ON or OFF automatically depending on the amount of daylight as measured by the ambient light sensor (1) at the upper end of the windshield glass.
Even with the AUTO headlamp feature in operation, it is recommended to manually turn ON the headlamps when driving at night or in a fog, driving in the rain, or when you enter dark areas, such as tunnels and parking facilities.
NOTICE Do not cover or spill anything on the
sensor (1) located at the upper end of the windshield glass.
Do not clean the sensor using a window cleaner, the cleanser may leave a light film which could interfere with sensor operation.
If your vehicle has window tint or other types of metallic coating on the front windshield, the AUTO headlamp system may not work properly.
LIGHTING
05
5-83
OIG046412
Position lamp position ( ) The position lamp, license plate lamp and instrument panel lamp are turned ON.
OIG046413
Headlamp position ( ) The headlamp, position lamp, license plate lamp and instrument panel lamp are turned ON.
Information The ignition switch must be in the ON position to turn on the headlamp.
High beam operation
OOS047407N
To turn on the high beam headlamp, push the lever away from you. The lever will return to its original position. The high beam indicator will light when the headlamp high beams are switched on. To turn off the high beam headlamp, pull the lever towards you. The low beams will turn on.
OIG046414
To flash the high beam headlamp, pull the lever towards you, then release the lever. The high beams will remain ON as long as you hold the lever towards you.
Convenient features
5-84
Turn signals and lane change signals
OIG046417
To signal a turn, push down on the lever for a left turn or up for a right turn in position (A). If an indicator stays on and does not flash or if it flashes abnormally, one of the turn signal bulbs may be burned out and will require replacement.
One touch turn signal To use One Touch Turn Signal push the turn signal lever up or down to position (B) and then release it. The lane change signals will blink 3, 5 or 7 times. You can enable the One Touch Turn Signal function or choose the number ofblinkingbyselectingSetupUser SettingsLightsOneTouchTurnSignal Off/3flashes/5flashes/7flashesinthe instrument panel LCD cluster.
Battery saver function The purpose of this feature is to prevent the battery from being discharged. The system automatically turns off the position lamp when the driver turns the vehicle off and opens the driver-side door. With this feature, the position lamps will turn off automatically if the driver parks on the side of road at night. If necessary, to keep the lamps on when the vehicle is turned off, perform the following: (1) Open the driver-side door. (2) Turn the position lamps OFF and ON
again using the headlamp switch on the steering column.
05
5-85
Headlamp delay function (if equipped) If you place the ignition switch to the ACC position or the OFF position with the headlamps ON, the headlamps (and/ or position lamps) remain on for about 5 minutes. However, if the drivers door is opened and closed, the headlamps are turned off after 15 seconds. Also, with the vehicle off if the drivers door is opened and closed, the headlamps (and/ or position lamps) are turned off after 15 seconds. The headlamps (and/or position lamps) can be turned off by pressing the lock button on the remote key or smart key twice or turning the headlamp switch to the OFF or AUTO position. You can enable the headlamp delay functionbyselectingSetupUser SettingsLightsHeadlightDelay.
NOTICE If the driver exits the vehicle through another door besides the driver door, the battery saver function does not operate and the headlamp delay function does not turn OFF automatically. This may cause the battery to discharge. To avoid battery discharge, turn OFF the headlamps manually from the headlamp switch before exiting the vehicle.
Traffic change (if equipped) The low beam light distribution is asymmetric. If you go abroad to a country with opposite traffic direction, this asymmetric part will dazzle oncoming car driver. To prevent dazzle, ECE regulation demand several technical solutions (ex. automatic change system, adhesive sheet, down aiming). These headlamps are designed not to dazzle opposite drivers. You can activate or deactivate the Traffic Change feature from the User Settings modeontheLCDdisplay.GotoLights Travel Mode. For more details, refer to LCD Display In chapter 4.
Convenient features
5-86
OIK047090
High Beam Assist will automatically adjust the headlamp range (switches between high beam and low beam) depending on the brightness of detected vehicles and certain road conditions.
Detecting sensor (Front view camera)
OTM070001
[1] : Front view camera
The front view camera is used as a detecting sensor to detect ambient light and brightness while driving. Refer to the picture above for the detailed location of the detecting sensor.
NOTICE Always keep the front view camera in good condition to maintain optimal performance of High Beam Assist. For more details on the precautions of the front view camera, refer to Forward Collision-Avoidance Assist (FCA) section in chapter 7.
System settings Withtheengineon,selectLightsHigh Beam Assist (or HBA (High Beam Assist)) from the Settings menu to turn on High Beam Assist and deselect to turn off the system.
WARNING For your safety, change the Settings after parking the vehicle at a safe location.
hIgh bEAm AssIsT (hbA)
05
5-87
System operation Display and control After selecting High Beam Assist
in the Settings menu, High Beam Assist will operate by following the procedure below. - Place the headlamp switch in
the AUTO position and push the headlamp lever towards the instrument cluster. The High Beam Assist ( ) indicator light will illuminate on the cluster and the system will be enabled.
- When the system is enabled, high beam will turn on when vehicle speed is above 25mph (40km/h). When vehicle speed is below 15mph (25km/h), high beam will not turn on.
- The High Beam ( ) indicator light will illuminate on the cluster when high beam is on.
When High Beam Assist is operating, if the headlamp lever or switch is used, the system operates as follow: - If the headlamp lever is pulled
towards you when the high beam is off, the high beam will turn on without High Beam Assist canceled. When you let go of the headlamp lever, the lever will move to the middle and the high beam will turn off.
- If the headlamp lever is pulled towards you when the high beam is on by High Beam Assist, low beam will be on and the system will turn off.
- If the headlamp switch is placed from AUTO to another position (headlamp/position/off), High Beam Assist will turn off and the corresponding lamp will turn on.
When High Beam Assist is operating, high beam switches to low beam if any of the following conditions occur: - When the headlamp of an
oncoming vehicle is detected. - When the tail lamp of a vehicle in
front is detected. - When the headlamp or tail lamp of a
motorcycle or a bicycle is detected. - When the surrounding ambient light
is bright enough that high beams are not required.
- When streetlights or other lights are detected.
System malfunction and limitations System malfunction Type A Type B
OTM050218N OTM050218L
When High Beam Assist is not working properly, the Check High Beam Assist (HBA) system or Check HBA (High Beam Assist system warning message will appear and warning light will illuminate on the cluster. We recommend that the system be inspected by an authorized HYUNDAI dealer.
Convenient features
5-88
Limitations of the system High Beam Assist may not work properly in the following situations: Light from a vehicle is not detected
because of lamp damage, or because it is hidden from sight, etc.
Headlamp of a vehicle is covered with dust, snow or water.
A vehicles headlamps are off but the fog lamps are on and etc.
There is a lamp that has a similar shape as a vehicles lamp.
Headlamps have been damaged or not repaired properly.
Headlamps are not aimed properly. Driving on a narrow curved road,
rough road, uphill or downhill. Vehicle in front is partially visible on a
crossroad or curved road. There is a traffic light, reflecting sign,
flashing sign or mirror ahead. There is a temporary reflector or flash
ahead (construction area). The road conditions are bad such as
being wet, iced or covered with snow. A vehicle suddenly appears from a
curve. The vehicle is tilted from a flat tire or
is being towed. Light from a vehicle is not detected
because of exhaust fume, smoke, fog, snow, etc.
For more details on the limitations of the front view camera, refer to Forward Collision-Avoidance Assist (FCA) section in chapter 7.
WARNING At times, High Beam Assist may not
work properly. It is the responsibility of the driver for safe driving practices and always check the road conditions for your safety.
When High Beam Assist does not operate normally, change the headlamp position manually between high beam and low beam.
05
5-89
INTERIOR LIGHTS
WARNING Do not use the interior lights when driving in the dark. The interior lights may obscure your view and cause an accident.
NOTICE Do not use the interior lights for extended periods when the vehicle is turned off or the battery will discharge.
Interior lamp AUTO cut The interior lamps will automatically go off approximately 10 minutes after the vehicle is turned off and the doors are closed. If a door is opened, the lamp will go off 40 minutes after the vehicle is turned off. If the doors are locked by the smart key and the vehicle enters the armed stage of the theft alarm system, the lamps will go off five seconds later.
Front lamps
OTM050227L
Front map lamp ( ): Touch either icons to turn the map lamp on or off. This light produces a spot beam for convenient use as a map lamp at night or as a personal lamp for the driver and the front passenger.
Door lamp ( ): The front or rear room lamps come on when the front or rear doors are opened. When doors are unlocked by the smart key, the front and rear lamps come on for approximately 30 seconds as long as any door is not opened. The front and rear room lamps go out gradually after approximately 30 seconds when the door is closed. However, if the Engine Start/Stop button is in the ON position or all doors are locked, the front and rear lamps will turn off. If a door is opened with the ignition switch in the ACC position or the OFF position, the front and rear lamps will stay on for about 20 minutes.
Room lamp ( ) Press the button to turn ON the room lamp for the front/rear seats.
Convenient features
5-90
Rear lamps Type A
OTM048076
Type B
OTM048409
Rear room lamp switch : Press this button to turn the room lamp on and off.
Vanity mirror lamp
OTM050200
Push the switch to turn the light on or off. : The lamp will turn on if this
button is pressed. : The lamp will turn off if this
button is pressed.
05
5-91
Luggage compartment lamp
OTM050079
ON : The luggage compartment lamp stays on at all times.
DOOR : The luggage compartment lamp comes on when the liftgate is opened.
OFF : The luggage compartment lamp is off.
Puddle lamp
OTM050080
Welcome light When all doors (and liftgate) are closed and locked, the puddle lamp will turn on for 15 seconds if the door is unlocked by the smart key or when you put your hand in the outside door handle with the smart key in possession. For more details, refer to Welcome System in this chapter.
Escort light When the Engine Start/Stop button is in the OFF position and the drivers door is opened, the puddle lamp will turn on for 30 seconds. If the drivers door is closed within the 30 second period, the puddle lamp will turn off after 15 seconds. If the drivers door is closed and locked, the puddle lamp will turn off immediately. The Puddle Lamp Escort Light will turn on only the first time the drivers door is opened after the engine is turned off.
Convenient features
5-92
Welcome system
OTM050075
Welcome system helps keep the driver visible by turning on vehicle lights when the driver approaches the vehicle.
Puddle lamp and door handle lamp When all the doors (and liftgate) are closed and locked, the puddle lamp and door handle lamp will turn on for approximately 15 seconds if any of the below is performed. 1. IfConvenienceWelcomemirror/
lightOndoorunlockisselectedin the User Settings mode on the LCD display, the lamps will turn on when the
door lock button is pressed on the smart key.
the lamps will turn on when the button of the outside door handle is pressed with the smart key in possession.
2. IfbothConvenienceWelcome mirror/lightOndoorunlockand ConvenienceWelcomemirror/light Ondriverapproachisselectedin the User Settings mode on the LCD display, the lamps will turn on when the vehicle is approached with the smart key in possession.
You can activate or deactivate Welcome Light function from the User Settings mode on the LCD display.
Headlamp and position lamp When the headlamp (lamp switch in the headlamp or AUTO position) is on and all doors (and liftgate) are locked and closed, the position lamp and headlamp will come on for 15 seconds when the door unlock button is pressed on the remote key or smart key. At this time, if you press the door lock or unlock button, the position lamp and headlamp will turn off immediately.
Interior lamp When the interior lamp switch is in the
position and all doors (and liftgate) are closed and locked, the room lamp will come on for 30 seconds if any of the below is performed. - When the door unlock button is
pressed on the remote key or smart key.
- When you put your hand in the outside door handle while carrying the smart key.
At this time, if you press the door lock or unlock button on the smart key the lamps will turn off immediately.
05
5-93
Front windshield wiper/washer
OTLE045161
Rear windshield wiper/washer
OTLE045508
A. Wiper speed control (front) MIST Single wipe OFF Off INT Intermittent wipe
AUTO* Auto control wipe LO Low wiper speed HI High wiper speed
B. Intermittent control wipe time adjustment
C. Wash with brief wipes (front) D. Rear wiper control*
HI High wiper speed LO Low wiper speed OFF Off
E. Wash with brief wipes (rear)
* : if equipped
Windshield wipers Operates as follows when the ignition switch is turned ON. MIST : For a single wiping cycle,
move the lever down (V) or up (MIST) and release it. The wipers will operate continuously if the lever is held in this position.
OFF : Wipers are not in operation. INT : Wipers operate intermittently
at the same wiping intervals. Use this mode in light rain or mist. To vary the speed setting, turn the speed control knob.
LO : The wiper runs at a lower speed. HI : The wiper runs at a higher speed.
Information If there is heavy accumulation of snow or ice on the windshield, defrost the windshield for about 10 minutes, or until the snow and/or ice is removed before using the windshield wipers to ensure proper operation. If you do not remove the snow and/or ice before using the wiper and washer, it may damage the wiper and washer system.
WIPERS AND WASHERS
Convenient features
5-94
AUTO (Automatic) control (if equipped) The rain sensor located on the upper end of the windshield glass senses the amount of rainfall and controls the wiping cycle for the proper interval. The wiper operation time will be automatically controlled depends on rainfall. When the rain stops, the wiper stops. To vary the sensitivity setting, turn the sensitivity control knob. If the wiper switch is set in AUTO mode when the Engine Start/Stop button is in the ON position, the wiper will operate once to perform a self-check of the system. Set the wiper to the OFF (O) position when the wiper is not in use.
WARNING To avoid personal injury from the windshield wipers, when the engine is running and the windshield wiper switch is placed in the AUTO mode: Do not touch the upper end of the
windshield glass facing the rain sensor.
Do not wipe the upper end of the windshield glass with a damp or wet cloth.
Do not put pressure on the windshield glass.
NOTICE When washing the vehicle, set the
wiper switch in the OFF (O) position to stop the auto wiper operation. The wiper may operate and be damaged if the switch is set in the AUTO mode while washing the vehicle.
Do not remove the sensor cover located on the upper end of the passenger side windshield glass. Damage to system components could occur and may not be covered by your vehicle warranty.
Because of using a photo sensor, temporary malfunction could occur according to sudden ambient light change made by stone and dust while driving.
05
5-95
Front windshield washers
OTLE045164
In the OFF position, pull the lever gently toward you to spray washer fluid on the windshield and to run the wipers 1-3 cycles. The spray and wiper operation will continue until you release the lever. If the washer does not work, you may need to add washer fluid to the washer fluid reservoir.
WARNING When the outside temperature is below freezing, ALWAYS warm the windshield using the defroster to help prevent the washer fluid from freezing on the windshield and obscuring your vision which could result in an accident and serious injury or death.
NOTICE To prevent possible damage to the
washer pump, do not operate the washer when the fluid reservoir is empty.
To prevent possible damage to the wipers or windshield, do not operate the wipers when the windshield is dry.
To prevent damage to the wiper arms and other components, do not attempt to move the wipers manually.
To prevent possible damage to the wipers and washer system, use anti- freezing washer fluids in the winter season or cold weather.
Convenient features
5-96
Rear window wiper and washer
OTLE045165
The rear window wiper and washer switch is located at the end of the wiper and washer switch lever. Turn the switch to the desired position to operate the rear wiper and washer. HI High wiper speed LO Low wiper speed OFF Off
OTLE045166
Push the lever away from you to spray rear washer fluid and to run the rear wipers 1~3 cycles. The spray and wiper operation will continue until you release the lever.
Auto rear wiper (if equipped) The rear wiper will operate while the vehicle is in reverse with the front wiper ON by selecting the function from the Settings menu on the LCD display. Select: - SetupUserSettingsConvenience AutoRearWiper(inR)
05
5-97
OTM050121L
mAnUAL CLImATE COnTROL sYsTEm (IF EQUIppED)
1. Fan speed control knob 2. Temperature control knob 3. Mode selection button 4. Front windshield defroster button 5. Rear window defroster button
6. Air conditioning button 7. Air intake control button
Convenient features
5-98
Mode selection (3)
The actual shape of air conditioner may differ from the illustration.
OTMA050100
The mode selection button controls the direction of the air flow through the ventilation system.
Heating and air conditioning 1. Start the engine. 2. Set the mode to the desired position.
To improve the effectiveness of heating and cooling, select: - Heating: - Cooling:
3. Set the temperature control to the desired position.
4. Set the air intake control to the outside (fresh) air position.
5. Set the fan speed control to the desired speed.
6. If air conditioning is desired, turn the air conditioning system on.
05
5-99
Face-Level (B, C, E)
Air flow is directed toward the upper body and face. Additionally, each outlet can be controlled to direct the air discharged from the outlet.
Bi-Level (B, C, D, E, F, G)
Air flow is directed towards the face and the floor.
Floor-Level (A, C, D, E, F, G)
Most of the air flow is directed to the floor, with a small amount of the air being directed to the windshield and side window defrosters.
Floor/Defrost-Level (A, C, D, E, F, G)
Most of the air flow is directed to the floor and the windshield with a small amount directed to the side window defrosters.
Front defroster (A, D)
Most of the air flow is directed to the windshield with a small amount of air directed to the side window defrosters.
A/C MAX-Level (B, D) (if equipped) To operate the A/C MAX, turn the temperature control knob to extreme left. Air flow is directed toward the upper body and face. In this mode, the air conditioning and the recirculated air position will be selected automatically. After the interior has cooled sufficiently, whenever possible, move the temperature knob away from A/C MAX and press the A/C button.
Convenient features
5-100
Front
OTM050124
Rear
OTM048308
Instrument panel vents The outlet vents can be opened or closed separately using the vent control lever. If you move the vent control lever to the left end, the outlet vents can be closed.
Temperature control The temperature will increase by turning the knob to the right. The temperature will decrease by turning the knob to the left.
Air intake control This is used to select outside (fresh) air position or recirculated air position. To change the air intake control position, press the control button.
Recirculated air position With the recirculated air position selected, air from the passenger compartment will be drawn through the heating system and heated or cooled according to the function selected.
Outside (fresh) air position Type A With the outside (fresh) air
position selected, air enters the vehicle from outside and is heated or cooled according to the function selected.
Type B
Information Using the system in the fresh air position is recommended. Prolonged operation of the heater in the recirculated air position (without air conditioning selected) can cause fogging of the windshield and side windows and the air within the passenger compartment will become stale. In addition, prolonged use of the air conditioning with the recirculated air position selected will result in excessively dry air in the passenger compartment.
05
5-101
WARNING Continued climate control system
operation in the recirculated air position may allow humidity to increase inside the vehicle which may fog the glass and obscure visibility.
Do not sleep in a vehicle with the air conditioning or heating system on. It may cause serious harm or death due to a drop in the oxygen level and/or body temperature.
Continued climate control system operation in the recirculated air position can cause drowsiness or sleepiness, and loss of vehicle control. Set the air intake control to the outside (fresh) air position as much as possible while driving.
Fan speed control Turn the knob to the right to increase the fan speed and airflow. Turn the knob to the left to decrease fan speed and airflow. Setting the fan speed control knob to the 0 position turns off the fan.
NOTICE Operating the fan speed when the ignition switch is in the ON position could cause the battery to discharge. Operate the fan speed when the engine is running.
Air conditioning (A/C) (if equipped) Press the A/C button to turn the air conditioning system on (indicator light will illuminate). Press the button again to turn the air conditioning system off.
System operation Ventilation 1. Set the mode to the position. 2. Set the air intake control to the
outside (fresh) air position. 3. Set the temperature control to the
desired position. 4. Set the fan speed control to the
desired speed.
Heating 1. Set the mode to the position. 2. Set the air intake control to the
outside (fresh) air position. 3. Set the temperature control to the
desired position. 4. Set the fan speed control to the
desired speed. 5. If dehumidified heating is desired,
turn the air conditioning system (if equipped) on.
If the windshield fogs up, set the mode to the or position.
Operation Tips To help keep dust or unpleasant fumes
from entering the vehicle through the ventilation system, temporarily set the air intake control to the recirculated air position. Be sure to return the control to the fresh air position when the irritation has passed to keep fresh air in the vehicle. This will help keep the driver alert and comfortable.
To prevent interior fog on the windshield, set the air intake control to the fresh air position and fan speed to the desired position, turn on the air conditioning system, and adjust the temperature control to the desired temperature.
Convenient features
5-102
Air conditioning HYUNDAI Air Conditioning Systems are filled with R-134a or R-1234yf refrigerant. 1. Start the engine. Push the air
conditioning button. 2. Set the mode to the position. 3. Set the air intake control to the
outside air or recirculated air position. 4. Adjust the fan speed control and
temperature control to maintain maximum comfort.
Information Your vehicle is filled with R-134a or R-1234yf according to the regulation in your country at the time of production. You can find out which air conditioning refrigerant is applied to your vehicle on the label located inside of the hood. Refer to chapter 8 for the location of the air conditioning refrigerant label.
NOTICE The refrigerant system should only
be serviced by trained and certified technicians to insure proper and safe operation.
The refrigerant system should be serviced in a well-ventilated place.
The air conditioning evaporator (cooling coil) shall never be repaired or replaced with one removed from a used or salvaged vehicle and new replacement MAC evaporators shall be certified (and labeled) as meeting SAE Standard J2842.
NOTICE When using the air conditioning
system, monitor the temperature gauge closely while driving up hills or in heavy traffic when outside temperatures are high. Air conditioning system operation may cause engine overheating. Continue to use the fan but turn the air conditioning system off if the temperature gauge indicates engine overheating.
When opening the windows in humid weather air conditioning may create water droplets inside the vehicle. Since excessive water droplets may cause damage to electrical equipment, air conditioning should only be used with the windows closed.
05
5-103
Air conditioning system operation tips If the vehicle has been parked in
direct sunlight during hot weather, open the windows for a short time to let the hot air inside the vehicle escape.
After sufficient cooling has been achieved, switch back from the recirculated air to the fresh outside air position.
To help reduce moisture inside of the windows on rainy or humid days, decrease the humidity inside the vehicle by operating the air conditioning system with the windows and sunroof closed.
Use the air conditioning system every month for a few minutes to ensure maximum system performance.
If you operate the air conditioner excessively, the difference between the temperature of the outside air and that of the windshield could cause the outer surface of the windshield to fog up, causing loss of visibility. In this case, set the mode selection knob to the position and set the fan speed control knob to the lowest speed setting.
System maintenance Cabin air filter
OIK047401L
[A] : Outside air, [B] : Recirculated air [C] : Cabin air filter, [D] : Blower [E] : Evaporator core, [F] : Heater core
The cabin air filter is installed behind the glove box. It filters the dust or other pollutants that enter the vehicle through the heating and air conditioning system. We recommend that the cabin air filter be replaced by an authorized HYUNDAI dealer according to the maintenance schedule. If the vehicle is being driven in severe conditions such as dusty or rough roads, more frequent climate control filter inspections and changes are required. If the air flow rate suddenly decreases, we recommend the system be checked at an authorized HYUNDAI dealer.
Convenient features
5-104
Checking the amount of air conditioner refrigerant and compressor lubricant When the amount of refrigerant is low, the performance of the air conditioning is reduced. Overfilling also reduces the performance of the air conditioning system. Therefore, if abnormal operation is found, we recommend that the system be inspected by an authorized HYUNDAI dealer.
NOTICE It is important that the correct type and amount of oil and refrigerant is used. Otherwise, damage to the compressor and abnormal system operation may occur. To prevent damage, the air conditioning system in your vehicle should only be serviced by trained and certified technicians.
WARNING Vehicles equipped with R-1234yf
Since the refrigerant is mildly flammable and operated at high pressure, the air conditioning system should only be serviced by trained and certified technicians. It is important that the correct type and amount of oil and refrigerant are used.
All refrigerants should be reclaimed with proper equipment. Venting refrigerants directly to the atmosphere is harmful to individuals and environment. Failure to heed these warnings can lead to serious injuries.
OTM050040L
Air Conditioning refrigerant label You can find out which air conditioning refrigerant is applied to your vehicle on the label located inside of the hood.
Example
OHYK059001
Each symbols and specification on the air conditioning refrigerant label is represented as below: 1. Classification of refrigerant 2. Amount of refrigerant 3. Classification of compressor lubricant 4. Caution 5. Flammable refrigerant 6. To require registered technician to
service air conditioning system
05
5-105
The actual shape of air conditioner may differ from the illustration.
OTMA050101
AUTOmATIC CLImATE COnTROL sYsTEm (IF EQUIppED)
1. Drivers temperature control knob 2. Passengers temperature control knob 3. AUTO (automatic control) button 4. Front windshield defroster button 5. Rear window defroster button 6. Air conditioning button
7. SYNC button 8. OFF button 9. Fan speed button 10. Mode selection button 11. Climate control button 12. Air intake control button
Convenient features
5-106
Automatic heating and air conditioning The Automatic Climate Control System is controlled by setting the desired temperature. 1. Press the AUTO button. (3)
The modes, fan speeds, air intake and air-conditioning will be controlled automatically by the temperature setting you select.
2. Turn the temperature control knob (1, 2) to the desired temperature. If the temperature is set to the lowest setting (Lo), the air conditioning system will operate continuously. After the interior has cooled sufficiently, adjust the knob to a higher temperature set point whenever possible.
To turn the automatic operation off, select any button of the following: - Mode selection button - Front windshield defroster button
(Press the button one more time to deselect the front windshield defroster function. The AUTO sign will illuminate on the information display once again.)
- Fan speed control button The selected function will be controlled manually while other functions operate automatically.
For your convenience and to improve the effectiveness of the climate control, use the AUTO button and set the temperature to 73F (23C).
OTM050052
Information Never place anything near the sensor to ensure better control of the heating and cooling system.
Manual heating and air conditioning The heating and cooling system can be controlled manually by pushing buttons other than the AUTO button. In this case, the system works sequentially according to the order of buttons selected. When pressing any button except the AUTO button while using automatic operation, the functions not selected will be controlled automatically. 1. Start the engine. 2. Set the mode to the desired position.
For improving the effectiveness of heating and cooling, select: - Heating: - Cooling:
3. Set the temperature control to the desired position.
4. Set the air intake control to the outside (fresh) air position.
5. Set the fan speed control to the desired speed.
6. If air conditioning is desired, turn the air conditioning system on.
7. Press the AUTO button to convert to full automatic control of the system.
05
5-107
Mode selection (12)
The actual shape of air conditioner may differ from the illustration.
OTMA050100
The mode selection button controls the direction of the air flow through the ventilation system.
Convenient features
5-108
Face-Level (B, C, E)
Air flow is directed toward the upper body and face. Additionally, each outlet can be controlled to direct the air discharged from the outlet.
Bi-Level (B, C, D, E, F, G)
Air flow is directed towards the face and the floor.
Floor-Level (A, C, D, E, F, G)
Most of the air flow is directed to the floor, with a small amount of the air being directed to the windshield and side window defrosters.
Floor/Defrost-Level (A, C, D, E, F, G)
Most of the air flow is directed to the floor and the windshield with a small amount directed to the side window defrosters.
Defrost-Level (A, D) Most of the air flow is directed to the windshield with a small amount of air directed to the side window defrosters.
Front
OTM050124
Rear
OTM050201
Instrument panel vents The outlet vents can be opened or closed separately using the vent control lever. If you move the vent control lever to the left end, the outlet vents can be closed.
05
5-109
Temperature control
OTM050103
The temperature will increase by pushing the knob upward. The temperature will decrease by pushing the knob downward.
OTM050108
Adjusting the driver and passenger side temperature equally Press the SYNC button to adjust
the driver and passenger side temperature equally. The passenger side temperature will be set to the same temperature as the driver side temperature.
Turn the driver side temperature control knob. The driver and passenger side temperature will be adjusted equally.
Adjusting the driver and passenger side temperature individually Press the SYNC button again to
adjust the driver and passenger side temperature individually. The button indicator will turn off.
Temperature conversion If the battery has been discharged or disconnected, the temperature mode display will reset to Centigrade. To change the temperature unit from C to F or F to C : - Automatic climate control system
Press the AUTO button for 3 seconds while pressing the OFF button.
- Instrument cluster GotoUserSettingsModeUnits Temperature Unit.
The temperature unit on both the cluster LCD display and the climate control screen will change.
Convenient features
5-110
Air intake control This is used to select the outside (fresh) air position or recirculated air position. To change the air intake control position, push the control button.
Recirculated air position With the recirculated air position selected, air from the passenger compartment will be drawn through the heating system and heated or cooled according to the function selected.
Outside (fresh) air position Type A With the outside (fresh) air
position selected, air enters the vehicle from outside and is heated or cooled according to the function selected.
Type B
Information Using the system in the fresh air position is recommended. Prolonged operation of the heater in the recirculated air position (without air conditioning selected) can cause fogging of the windshield and side windows and the air within the passenger compartment will become stale. In addition, prolonged use of the air conditioning with the recirculated air position selected will result in excessively dry air in the passenger compartment.
WARNING Continued climate control system
operation in the recirculated air position may allow humidity to increase inside the vehicle which may fog the glass and obscure visibility.
Do not sleep in a vehicle with the air conditioning or heating system on. It may cause serious harm or death due to a drop in the oxygen level and/or body temperature.
Continued climate control system operation in the recirculated air position can cause drowsiness or sleepiness, and loss of vehicle control. Set the air intake control to the outside (fresh) air position as much as possible while driving.
05
5-111
Fan speed control The fan speed can be set as desired by pushing the fan speed control button. More air is delivered with higher fan speeds. Pressing the OFF button turns off the fan.
NOTICE Operating the fan when the ignition switch is in the ON position could cause the battery to discharge. Operate the fan when the engine is running.
Air conditioning Push the A/C button to turn the air conditioning system on (indicator light will illuminate). Push the button again to turn the air conditioning system off.
OFF mode Push the OFF button to turn the climate control system off. However, you can still operate the mode and air intake buttons as long as the ignition switch is in the ON position.
System operation Ventilation 1. Set the mode to the position. 2. Set the air intake control to the
outside (fresh) air position. 3. Set the temperature control to the
desired position. 4. Set the fan speed control to the
desired speed.
Heating 1. Set the mode to the position. 2. Set the air intake control to the
outside (fresh) air position. 3. Set the temperature control to the
desired position. 4. Set the fan speed control to the
desired speed. 5. If dehumidified heating is desired,
turn the air conditioning system on. If the windshield fogs up, set the mode to the or position.
Operation Tips To help keep dust or unpleasant fumes
from entering the vehicle through the ventilation system, temporarily set the air intake control to the recirculated air position. Be sure to return the control to the fresh air position when the irritation has passed to keep fresh air in the vehicle. This will help keep the driver alert and comfortable.
To prevent interior fog on the windshield, set the air intake control to the fresh air position and fan speed to the desired position, turn on the air conditioning system, and adjust the temperature control to the desired temperature.
Convenient features
5-112
Air conditioning HYUNDAI Air Conditioning Systems are filled with R-1234yf refrigerant. 1. Start the engine. Push the air
conditioning button. 2. Set the mode to the position. 3. Set the air intake control to the
outside air or recirculated air position. 4. Adjust the fan speed control and
temperature control to maintain maximum comfort.
Information Your vehicle is filled with R-134a or R1234yf according to the regulation in your country at the time of production. You can find out which air conditioning refrigerant is applied to your vehicle on the label located inside of the hood. Refer to chapter 8 for the location of the air conditioning refrigerant label.
NOTICE The refrigerant system should only
be serviced by trained and certified technicians to insure proper and safe operation.
The refrigerant system should be serviced in a well-ventilated place.
The air conditioning evaporator (cooling coil) shall never be repaired or replaced with one removed from a used or salvaged vehicle and new replacement MAC evaporators shall be certified (and labeled) as meeting SAE Standard J2842.
NOTICE When using the air conditioning
system, monitor the temperature gauge closely while driving up hills or in heavy traffic when outside temperatures are high. Air conditioning system operation may cause engine overheating. Continue to use the fan but turn the air conditioning system off if the temperature gauge indicates engine overheating.
When opening the windows in humid weather air conditioning may create water droplets inside the vehicle. Since excessive water droplets may cause damage to electrical equipment, air conditioning should only be used with the windows closed.
05
5-113
Air conditioning system operation tips If the vehicle has been parked in
direct sunlight during hot weather, open the windows for a short time to let the hot air inside the vehicle escape.
After sufficient cooling has been achieved, switch back from the recirculated air to the fresh outside air position.
To help reduce moisture inside of the windows on rainy or humid days, decrease the humidity inside the vehicle by operating the air conditioning system with the windows and sunroof closed.
Use the air conditioning system every month for a few minutes to ensure maximum system performance.
If you operate the air conditioner excessively, the difference between the temperature of the outside air and that of the windshield could cause the outer surface of the windshield to fog up, causing loss of visibility. In this case, set the mode selection button to the position and set the fan speed control knob to the lowest speed setting.
System maintenance Cabin air filter
OIK047401L
[A] : Outside air, [B] : Recirculated air [C] : Cabin air filter, [D] : Blower [E] : Evaporator core, [F] : Heater core
The cabin air filter is installed behind the glove box. It filters the dust or other pollutants that enter the vehicle through the heating and air conditioning system. We recommend that the cabin air filter be replaced by an authorized HYUNDAI dealer according to the maintenance schedule. If the vehicle is being driven in severe conditions such as dusty or rough roads, more frequent climate control filter inspections and changes are required. If the air flow rate suddenly decreases, we recommend the system be checked at an authorized HYUNDAI dealer.
Convenient features
5-114
Checking the amount of air conditioner refrigerant and compressor lubricant When the amount of refrigerant is low, the performance of the air conditioning is reduced. Overfilling also reduces the performance of the air conditioning system. Therefore, if abnormal operation is found, we recommend that the system be inspected by an authorized HYUNDAI dealer.
NOTICE It is important that the correct type and amount of oil and refrigerant is used. Otherwise, damage to the compressor and abnormal system operation may occur. To prevent damage, the air conditioning system in your vehicle should only be serviced by trained and certified technicians.
WARNING Vehicles equipped with R-1234yf
Since the refrigerant is mildly flammable and operated at high pressure, the air conditioning system should only be serviced by trained and certified technicians. It is important that the correct type and amount of oil and refrigerant are used.
All refrigerants should be reclaimed with proper equipment. Venting refrigerants directly to the atmosphere is harmful to individuals and environment. Failure to heed these warnings can lead to serious injuries.
OTM050040L
Air Conditioning refrigerant label You can find out which air conditioning refrigerant is applied to your vehicle on the label located inside of the hood.
Example
OHYK059001
Each symbols and specification on the air conditioning refrigerant label is represented as below: 1. Classification of refrigerant 2. Amount of refrigerant 3. Classification of compressor lubricant 4. Caution 5. Flammable refrigerant 6. To require registered technician to
service air conditioning system
05
5-115
WINDSHIELD DEFROSTING AND DEFOGGING
WARNING Windshield heating Do not use the position during cooling operation in extremely humid weather. The difference between the temperature of the outside air and that of the windshield could cause the outer surface of the windshield to fog up, causing loss of visibility could cause an accident resulting in serious injury or death. In this case, set the mode selection button to the position and fan speed control knob to a lower speed.
For maximum defrost performance, set the temperature control to the highest temperature setting and the fan speed control to the highest setting.
If warm air to the floor is desired while defrosting or defogging, set the mode to the floor-defrost position.
Before driving, clear all snow and ice from the windshield, rear window, side view mirrors, and all side windows.
Clear all snow and ice from the hood and air inlet in the cowl grill to improve heater and defroster efficiency and to reduce the probability of fogging up the inside of the windshield.
NOTICE If the engine temperature is still cold after starting, then a brief engine warm up period may be required for the vented air flow to become warm or hot.
Manual climate control system To defog inside windshield
OTM050115
1. Select any fan speed except 0 position.
2. Select the desired temperature. 3. Press the defroster button ( ). 4. The outside (fresh) air will be selected
automatically. Additionally, the air conditioning (if equipped) will automatically operate if the mode is selected to the position.
If the air conditioning and outside (fresh) air position are not selected automatically, press the corresponding button manually.
Convenient features
5-116
To defrost outside windshield
OTM050126
1. Set the fan speed to the highest (extreme right) position.
2. Set the temperature to the extreme hot position.
3. Press the defroster button ( ). 4. The outside (fresh) air and air
conditioning (if equipped) will be selected automatically.
Automatic climate control system To defog inside windshield
OTM050116
1. Select the desired fan speed. 2. Select the desired temperature. 3. Press the defroster button ( ). 4. The air-conditioning will turn on
according to the detected ambient temperature, outside (fresh) air position and higher fan speed will be selected automatically.
If the air-conditioning, outside (fresh) air position and higher fan speed are not selected automatically, adjust the corresponding button or knob manually. If the position is selected, lower fan speed is controlled to higher fan speed.
05
5-117
To defrost outside windshield
OTM050117
1. Set fan speed to the highest position. 2. Set temperature to the extreme hot
(HI) position. 3. Press the defroster button ( ). 4. The air-conditioning will turn
on according to the detected ambient temperature and outside (fresh) air position will be selected automatically.
If the position is selected, lower fan speed is controlled to higher fan speed.
Auto defogging system (only for automatic climate control system, if equipped) Auto defogging help reduce the possibility of fogging up the inside of the windshield by automatically sensing the moisture on inside the windshield. The auto defogging system operates when the heater or air conditioning is on.
Information The auto defogging system may not operate normally, when the outside temperature is below 14F(-10C).
To cancel or set the Auto Defogging System, keep the front defroster button pressed for 3 seconds. The ADS OFF symbol will be shown in the climate display to inform you that the system is deactivated. To re-activate the auto defogging system, follow the procedure mentioned above and the ADS OFF symbol will disappear. If the battery has been disconnected or discharged, it resets to the auto defogging status.
Information For efficiency, do not select recirculated air position while the Auto defogging system is operating.
NOTICE Do not remove the sensor cover located on the top of the windshield glass. Damage to system parts could occur and may not be covered by your vehicle warranty.
Convenient features
5-118
Rear window defroster
NOTICE To prevent damage to the rear window defroster conducting elements bonded to the inside surface of the rear window, never use sharp instruments or window cleaners containing abrasives to clean the window.
The defroster heats the window to remove frost, fog and thin ice from the interior and exterior of the rear window, while the engine is running.
To activate the rear window defroster, press the rear window defroster button located in the center control panel. The indicator on the rear window defroster button illuminates when the defroster is ON.
To turn off the defroster, press the rear window defroster button again.
Information If there is heavy accumulation of snow
on the rear window, brush it off before operating the rear defroster.
The rear window defroster automatically turns off after approximately 20 minutes or when the Engine Start/Stop button is in the OFF position.
Side view mirror defroster (if equipped) If your vehicle is equipped with the Side view mirror defrosters, they will operate at the same time you turn on the rear window defroster.
05
5-119
Auto defogging system
OTM050039
Auto defogging helps reduce the possibility of fogging up the inside of the windshield by automatically sensing the moisture on inside the windshield. The auto defogging system operates when the heater or air conditioning is on.
Information The auto defogging system may not operate normally, when the outside temperature is below 14F (10C).
When the Auto Defogging System operates, the indicator will illuminate.
If a high amount of humidity is detected in the vehicle, the Auto Defogging System will be enabled. The following steps will be performed automatically: Step 1) Air conditioning will turn ON. Step 2) Air intake control will change to
Fresh mode. Step 3) Mode will change to defrost to
direct airflow to the windshield. Step 4) Fan speed will be set to MAX.
If the air conditioning is off or recirculation mode is manually selected while Auto Defogging System is ON, the Auto Defogging System indicator will blink 3 times to signal that the manual operation has been canceled.
CLIMATE CONTROL ADDITIONAL FEATURES
Convenient features
5-120
Turning the Auto Defogging System ON or OFF Climate control system Press the front windshield defroster button for 3 seconds when the Engine Start/Stop button is in the ON position. When the Auto Defogging System is turned off, the ADS OFF symbol will blink 3 times and ADS OFF will be displayed on the climate control information screen. When the Auto Defogging System is turned on, the ADS OFF symbol will blink 6 times without a signal.
Infotainment system Auto Defogging System can be turned onandoffbyselectingSetup VehicleSettingsClimateDefog/ DefrostOptionsAutoDefogfromthe infotainment system screen. For detailed information, refer to the separately supplied infotainment system manual.
Information When the air conditioning is turned
on by Auto Defogging System, if you try to turn off the air conditioning, the indicator will blink 3 times and the air conditioning will not be turned off.
To maintain the effectiveness and efficiency of the Auto Defogging System, do not select Recirculation mode while the system is operating.
When Auto Defogging System is operating, fan speed adjustment, temperature adjustment, and air intake control selection are all disabled.
NOTICE Do not remove the sensor cover located on the upper end of the windshield glass. Damage to system parts could occur and may not be covered by your vehicle warranty.
Auto dehumidify (if equipped) To increase cabin air quality and reduce windshield misting, recirculation mode switches off automatically after about 5 to 30 minutes, depending on the outside temperature, and the air intake will change to fresh mode.
Turning Auto Dehumidify ON or OFF Climate control system To turn the Auto Dehumidify feature on or off, select Face level ( ) mode and press the air intake control ( ) button at least five times within three seconds. When Auto Dehumidify is turned on, the air intake control button indicator will blink 6 times. When turned off, the indicator will blink 3 times.
Infotainment system Auto Dehumidify can be turned on and offbyselectingSetupVehicleSettings ClimateAutomaticVentilation Auto Dehumidify from the infotainment system screen. For detailed information, refer to the separately supplied infotainment system manual.
05
5-121
Recirculating air when washer fluid is used Recirculation mode automatically activates to reduce any objectionable scent of the washer fluid from entering the cabin when the windshield washer is used.
Turning Activate upon Washer Fluid Use ON or OFF Climate control system To turn the Activate upon Washer Fluid Use feature on or off, select Floor level ( ) mode, and then press the air intake control ( ) button four times within two seconds while pressing the A/C icon. When Activate upon Washer Fluid Use ON is turned on, the air intake control button indicator will blink 6 times. When turned off, the indicator will blink 3 times.
Infotainment system Activate upon Washer Fluid Use can be turnedonandoffbyselectingSetup VehicleSettingsClimateRecirculate AirActivateuponWasherFluidUse (or Interlocking washer fluid) from the infotainment system screen. For detailed information, refer to the separately supplied infotainment system manual.
However, in cold weather to prevent the windshield from fogging up, the recirculation mode may not be selected.
Sunroof inside air recirculation (if equipped) When the is sunroof opened, fresh mode will be automatically selected. At this time, if you press the air intake control button, recirculation mode will be selected but will change back to fresh mode after 3 minutes. When the sunroof is closed, the air intake position will return to the original position that was selected.
Auto. Controls That Use Climate Control Settings (for drivers seat) The temperature of the drivers seat warmer, air ventilated seat and heated steering wheel is automatically controlled depending on the inside and outside temperature of the vehicle when the engine is running. To use these features, it must be enabled from the Settings menu in the infotainment system screen. Select: - SetupVehicleSettingsSeat Heated/VentilatedFeaturesHeated/ VentilatedFeaturesAuto.Controls That Use Climate Control Settings
For more details on Auto Comfort Control, refer to Seat Warmers and Air ventilation seats section in chapter 3 and Heated Steering Wheel section in chapter 5.
Convenient features
5-122
WARNING Never store cigarette lighters, propane cylinders, or other flammable/explosive materials in the vehicle. These items may catch fire and/or explode if the vehicle is exposed to hot temperatures for extended periods.
WARNING ALWAYS keep the storage compartment covers closed securely while driving. Items inside your vehicle are moving as fast as the vehicle. If you have to stop or turn quickly, or if there is a crash, the items may fly out of the compartment and may cause an injury if they strike the driver or a passenger.
NOTICE To avoid possible theft, do not leave valuables in the storage compartments.
Center console storage
OTM050037
To open: Press the button.
Glove box
OTM050223L
To open: Pull the lever (1).
WARNING ALWAYS close the glove box door after use. An open glove box door can cause serious injury to the passenger in an accident, even if the passenger is wearing a seat belt.
STORAGE COMPARTMENT
05
5-123
Tray
OTM050034
WARNING Do not place the heavy, sharp or breakable objects in the tray. Such objects can be thrown from the tray in the event of a sudden stop or an accident, possibly injuring the passengers in the vehicle.
Luggage tray (if equipped) Type A
OTM050202
Type B
OTM050203
You can place a first aid kit, a reflector triangle (front tray), tools, etc. in the box for easy access. Grasp the handle on the top of the
cover and lift it.
Convenient features
5-124
Cup holder Front
OTM050030L
Rear
OTM050204
Cups or small beverages cups may be placed in the cup holders.
WARNING Avoid abrupt starting and braking
when the cup holder is in use to prevent spilling your drink. If hot liquid spills, you could be burned. Such a burn to the driver could cause loss of vehicle control resulting in an accident.
Do not place uncovered or unsecured cups, bottles, cans, etc., in the cup holder containing hot liquid while the vehicle is in motion. Injuries may result in the event of a sudden stop or collision.
Only use soft cups in the cup holders. Hard objects can injure you in an accident.
WARNING Keep cans or bottles out of direct sun light and do not put them in a hot vehicle. It may explode.
NOTICE Keep your drinks sealed while
driving to prevent spilling your drink. If liquid spills, it may get into the vehicles electrical/electronic system and damage electrical/electronic parts.
When cleaning spilled liquids do not use hot air to blow out or dry the cup holder. This may damage the interior.
INTERIOR FEATURES
05
5-125
Ashtray (if equipped)
OPDE046419
To use the ashtray, open the cover.
To clean the ashtray: The plastic receptacle should be removed by lifting the plastic ashtray receptacle upward after turning the cover counterclockwise and pulling it out.
WARNING Putting lit cigarettes or matches in an ashtray with other combustible materials may cause a fire.
Sunvisor
OTM048089
To use the sunvisor, pull it downward. To use the sunvisor to block the sun from the side window, pull it downward, release it from the bracket (1) and swing it to the side (2) towards the window. To use the vanity mirror, pull down the sunvisor and slide the mirror cover (3). Adjust the sunvisor forward or backward (4) as needed (if equipped). Use the ticket holder (5) to hold tickets. Close the vanity mirror cover securely and return the sunvisor to its original position after use.
WARNING For your safety, do not block your view when using the sunvisor.
NOTICE The tab (5) adjacent to the vanity mirror on the sunvisor can be used for toll road tickets or self parking tickets. Use caution when inserting tickets into the ticket holder to avoid damage. Refrain from putting several tickets in the ticket holder as this could also damage the retaining tab.
Convenient features
5-126
Power outlet Front
OTM050026
Rear
OTM050031
The power outlet is designed to provide power for mobile telephones or other devices designed to operate with vehicle electrical systems. The devices should draw less than 180 watts with the engine running.
WARNING Avoid electrical shocks. Do not place your fingers or foreign objects (pin, etc.) into a power outlet or touch the power outlet with a wet hand.
CAUTION To prevent damage to the power outlets: Use the power outlet only when the
engine is running and remove the accessory plug after use. Using the accessory plug for prolonged periods of time with the engine off could cause the battery to discharge.
Only use 12 volts electric accessories which are less than 180 watts in electric capacity.
Adjust the air-conditioner or heater to the lowest operating level when using the power outlet.
Close the cover when not in use. Some electronic devices can
cause electronic interference when plugged into a vehicles power outlet. These devices may cause excessive audio static and malfunctions in other electronic systems or devices used in your vehicle.
Push the plug in as far as it will go. If good contact is not made, the plug may overheat and the fuse may open.
Plug in battery equipped electrical/ electronic devices with reverse current protection. The current from the battery may flow into the vehicles electrical/electronic system and cause system malfunction.
05
5-127
USB charger Front
OTM050028
Rear
OTM050058
The USB charger is designed to recharge batteries of small size electrical devices using a USB cable. The electrical devices can be recharged when the Engine Start/Stop button is in the ACC or ON (or START) position. The battery charging state may be monitored on the electrical device. Disconnect the USB cable from the USB port after use. A smart phone or a tablet PC may
get warmer during the re-charging process. It does not indicate any malfunction with the charging system.
A smart phone or a tablet PC, which adopts a different re-charging method, may not be properly re- charged. In this case, use an exclusive charger of your device.
The charging terminal is only to recharge a device. Do not use the charging terminal either to turn ON an audio or to play media In the infotainment system.
AC Inverter (if equipped)
OTMA050011
The AC inverter supplies 115V/150W electric power to operate electric accessories or equipments.
Information
OJX1070288L
Rated voltage : AC 115 volts Maximum electric power : 150 watts In order to avoid an electrical system
failure, electric shock, etc., be sure to read owners manual before use.
Be sure to close the cover except the time of use.
Convenient features
5-128
WARNING To reduce a risk of serious or fatal injuries: Do not use a heated electric device
such as a coffeepot, toaster, heater, iron, etc.
Do not insert foreign objects into the outlet and do not touch the outlet as you may get shocked.
Do not let children touch the AC inverter.
NOTICE To help prevent the battery from
being discharged, do not use the AC inverter while the engine is not running.
When not using the AC inverter, make sure to close the AC inverter cover.
After using an electric accessory or equipment, pull the plug out. Leaving the accessory or equipment plugged in for a long time may cause battery discharge.
Do not use an electric accessory or equipment the power consumption of which is greater than 220 volts/200 watts.
Some electric accessories or equipment can cause electronic interference. It may cause excessive audio noise and malfunctions in other electric systems or devices in the vehicle.
Do not use broken electric accessories or equipment, which may damage the AC inverter and electrical systems of the vehicle.
Do not use two or more electric accessories or equipment at the same time. It may cause damage to the electrical systems of the vehicle.
When the input voltage is lower, outlet LED will blink and the AC inverter will turn off automatically. If the input voltage goes up to normal, the AC inverter will turn on again.
05
5-129
Wireless smart phone charging system (if equipped)
OTM050022
[A] : Indicator light, [B] : Charging pad
On certain models, the vehicle comes equipped with a wireless smart phone charger. The system is available when all doors are closed, and when the Engine Start/ Stop button is in the ACC or ON (or START) position.
To charge a cellular phone The wireless smart phone charging system charges only the Qi-enabled smart phones ( ). Read the label on the smart phone accessory cover or visit your smart phone manufacturers website to check whether your smart phone supports the Qi technology. The wireless charging process starts when you put a Qi-enabled smart phone on the wireless charging unit. 1. Remove other items, including the
smart key, from the wireless charging unit. If not, the wireless charging process may be interrupted. Place the smart phone on the center of the charging pad.
2. The indicator light is orange when the smart phone is charging. The indicator light will turn blue when phone charging is complete.
3. You can turn ON or OFF the wireless charging function from the Settings menu on the instrument cluster. Select: - SetupUsersettings ConvenienceWirelessCharging
If your smart phone is not charging: - Slightly change the position of the
smart phone on the charging pad. - Make sure the indicator light is
orange.
Convenient features
5-130
The indicator light will blink orange for 10 seconds if there is a malfunction in the wireless charging system. In this case, temporarily stop the charging process, and re-attempt to charge your smart phone again. The system warns you with a message on the LCD display if the smart phone is still on the wireless charging unit after the vehicle is turned OFF and the front door is opened.
For some manufacturers smart phones, the system may not warn you even though the smart phone is left on the wireless charging unit. This is due to the particular characteristic of the smart phone and not a malfunction of the wireless charging.
Information For some manufacturers cellular phones, the system may not warn you even though the cellular phone is left on the wireless charging unit. This is due to the particular characteristic of the cellular phone and not a malfunction of the wireless charging.
NOTICE The wireless smart phone charging
system may not support certain smart phones, which are not verified for the Qi specification ( ).
When placing your smart phone on the charging pad, position the phone in the middle of the mat for optimal charging performance. If your smart phone is off to the side, the charging rate may be less and in some cases the smart phone may experience higher heat conduction.
In some cases, the wireless charging may stop temporarily when the smart key is used, either when starting the vehicle or locking/ unlocking the doors, etc.
When charging certain smart phones, the charging indicator may not change to blue when the smart phone is fully charged.
The wireless charging process may temporarily stop, when temperature abnormally increases inside the wireless smart phone charging system. The wireless charging process restarts, when temperature falls to a certain level.
The wireless charging process may temporarily stop when there is any metallic item, such as a coin, between the wireless smart phone charging system and smart phone.
05
5-131
When charging some smart phones with a self-protection feature, the wireless charging speed may decrease and the wireless charging may stop.
If the smart phone has a thick cover, the wireless charging may not be possible.
If the smart phone is not completely contacting the charging pad, wireless charging may not operate properly.
Some magnetic items like credit cards, phone cards or rail tickets may be damaged if left with the smart phone during the charging process.
When any smart phone without a wireless charging function or a metallic object is placed on the charging pad, a small noise may sound. This small sound is due to the vehicle discerning compatibility of the object placed on the charging pad. It does not affect your vehicle or the smart phone in any way.
Information If the Ignition switch is in the OFF position, the charging also stops.
Information This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful
interference, and 2. This device must accept any
interference received, including interference that may cause undesired operation.
Clock The clock can be set from the infotainment system. For detailed information, refer to the separately supplied infotainment system manual.
WARNING Do not attempt to adjust the clock while driving. Doing so may result in distracted driving which may lead to an accident involving personal injury or death.
Coat hook
OTM048095
These hooks are not designed to hold large or heavy items.
Convenient features
5-132
WARNING
OTM048096
Do not hang other objects such as hangers or hard objects except clothes. Also, do not put heavy, sharp or breakable objects in the clothes pockets. In an accident or when the curtain air bag is inflated, it may cause vehicle damage or personal injury.
Floor mat anchor(s) ALWAYS use the Floor Mat Anchors to attach the front floor mats to the vehicle. The anchors on the front floor carpet keep the floor mats from sliding forward.
WARNING Do not overlay additional mats or liners over the floor mats. If using All Weather mats, remove the carpeted floor mats before installing them. Only use floor mats designed to connect to the anchors.
WARNING The following must be observed when installing ANY floor mat to the vehicle. Ensure to remove a protective
film attached on the carpet before attaching a floor mat on the front floor carpet. Otherwise, the floor mat may move freely on the protective film and it could result in unintentional braking or accelerating.
Ensure that the floor mats are securely attached to the vehicles floor mat anchor(s) before driving the vehicle.
Do not use ANY floor mat that cannot be firmly attached to the vehicles floor mat anchors.
Do not stack floor mats on top of one another (e.g. all-weather rubber mat on top of a carpeted floor mat). Only a single floor mat should be installed in each position.
IMPORTANT - Your vehicle was manufactured with drivers side floor mat anchors that are designed to securely hold the floor mat in place. To avoid any interference with pedal operation, HYUNDAI recommends that the HYUNDAI floor mat designed for use in your vehicle be installed.
05
5-133
Side curtain (if equipped)
OTM050206
To use the side curtain: 1. Lift the curtain by the hook (1). 2. Hang the curtain on both sides of the
hook.
CAUTION Always hang both sides of the
curtain on the hook. This could cause damage to the side curtain if only one side of the curtain is hooked.
Do not let any foreign material get in between the vehicle and side curtain. The side curtain may not be lifted up.
Luggage net holder (if equipped) Type A
OTM048098
Type B
OTM048099
To keep items from shifting in the luggage compartment, you can use the 4 holders located in the luggage side trim to attach the luggage net. Make sure the luggage net is securely attached to the holders in the luggage board. If necessary, we recommend that you contact your authorized HYUNDAI dealer to obtain a luggage net.
Convenient features
5-134
WARNING Avoid eye injury. DO NOT overstretch the luggage net. ALWAYS keep your face and body out of the luggage nets recoil path. DO NOT use the luggage net when the strap has visible signs of wear or damage. Use the luggage net to keep only light items from shifting in the luggage compartment.
Cargo security screen (if equipped)
OTM048411
Use the cargo security screen to cover items stored in the cargo area.
Using the cargo security screen
OTM048412
1. Pull the cargo security screen towards the rear of the vehicle by the handle (1).
2. Insert the guide pin (2) into the guide (3).
Information Pull out the cargo security screen with the handle in the center to prevent the guide pin from falling out of the guide.
When the cargo security screen is not in use: 1. Pull the cargo security screen
backward and up to release it from the guides.
2. The cargo security screen will automatically slide back in.
Information The cargo security screen may not automatically slide back in if the cargo security screen is not fully pulled out. Pull the cargo screen out all the way and then slowly allow the screen to retract back in.
05
5-135
NOTICE Since the cargo security screen may be damaged or malformed, do not put luggage on it when it is used.
WARNING Do not place objects on the cargo
security screen. Such objects may be thrown about inside the vehicle and possibly injure vehicle occupants during an accident or when braking.
Never allow anyone to ride in the luggage compartment. It is designed for luggage only.
Maintain the balance of the vehicle and locate the weight as forward as possible.
Removing the cargo security screen
OTM048411
1. Push one side of the cargo screen inward to compress the spring and release the screen from the vehicle.
2. While the spring is compressed, pull out the cargo security screen.
3. Open the luggage tray and keep the cargo security screen in the tray.
Removing the cargo security screen from the luggage tray
OJX1059271L
1. Pull up the screen board.
OJX1059272L
2. Push in the guide pin.
OJX1059273L
3. While pushing the guide pin, pull out the cargo security screen.
Convenient features
5-136
ExTERIOR FEATURES Roof side rails
OTM050017
If your vehicle comes with roof side rails, then roof side rails crossbars can be installed on top of your vehicle. The roof side rails crossbars are an accessory and are available at your HYUNDAI dealer.
NOTICE If the vehicle is equipped with a sunroof, be sure not to position cargo onto the roof side rails in such a way that it could interfere with sunroof operation.
NOTICE When carrying cargo on the roof side
rails, take the necessary precautions to make sure the cargo does not damage the roof of the vehicle.
When carrying large objects on the roof side rails, make sure they do not exceed the overall roof length or width.
WARNING The following specification is the
maximum weight that can be loaded onto the roof side rails. Distribute the load as evenly as possible onto the roof side rails and secure the load firmly. Loading cargo or luggage in excess of the specified weight limit on the roof side rails may damage your vehicle.
ROOF SIDE RAILS
220 lbs. (100 kg) EVENLY DISTRIBUTED
The vehicle center of gravity will be higher when items are loaded onto the roof side rails. Avoid sudden starts, braking, sharp turns, abrupt maneuvers or high speeds that may result in loss of vehicle control or rollover resulting in an accident.
Always drive slowly and turn corners carefully when carrying items on the roof side rails. Severe wind updrafts, caused by passing vehicles or natural causes, can cause sudden upward pressure on items loaded on the roof side rails. This is especially true when carrying large, flat items such as wood panels or mattresses. This could cause the items to fall off the roof side rails and cause damage to your vehicle or others around you.
To prevent damage or loss of cargo while driving, check frequently before or while driving to make sure the items on the roof side rails are securely fastened.
05
5-137
NOTICE If you install an aftermarket HID
head lamp, your vehicles audio and electronic devices may not function properly.
Prevent chemicals such as perfume, cosmetic oil, sun cream, hand cleaner, and air freshener from contacting the interior parts because they may cause damage or discoloration.
USB Port
OTM050016
You can use an USB cable to connect audio devices to the vehicle USB port.
Information When using a portable audio device connected to the power outlet, noise may occur during playback. If this happens, use the portable audio devices power source.
Antenna Shark fin antenna
OTM049420
The shark fin antenna receives transmitted data. (for example: AM/FM, DAB, GPS)
Steering wheel remote controls
OTM050207
NOTICE Do not operate multiple audio remote control buttons simultaneously.
INFOTAINMENT SYSTEM
Convenient features
5-138
VOLUME (VOL + / VOL -) (1) Rotate the VOLUME scroll up to
increase volume. Rotate the VOLUME scroll down to
decrease volume.
SEEK/PRESET ( / ) (2) If the SEEK/PRESET switch is pressed up or down and held for 0.8 second or more, it will function in the following modes: RADIO mode
It will function as the AUTO SEEK select button. It will SEEK until you release the button.
MEDIA mode It will function as the FF/RW button.
If the SEEK/PRESET switch is pressed up or down, it will function in the following modes: RADIO mode
It will function as the PRESET STATION UP/DOWN button.
MEDIA mode It will function as the TRACK UP/ DOWN button.
MODE (3) Press the MODE button to toggle through Radio or Media modes.
MUTE ( ) (4) Press the MUTE button to mute the
sound. Press the MUTE button again to
activate the sound.
Information See additional information in supplied Infotainment Manual.
Infotainment system For detailed information, refer to the separately supplied infotainment system manual.
Voice recognition
OTM050209
For detailed information, refer to the separately supplied infotainment system manual.
05
5-139
Bluetooth Wireless Technology
OTM050208
OTM050224L
(1) Call / Answer button (2) Call end button (3) Microphone
For detailed information, refer to the separately supplied infotainment system manual.
CAUTION To avoid driver distractions, do not excessively operate the device while driving the vehicle which may lead to an accident.
How vehicle radio works FM reception
OJF045308L
AM and FM radio signals are broadcast from transmitter towers located around your city. They are intercepted by the radio antenna on your vehicle. This signal is then received by the radio and sent to your vehicle speakers. When a strong radio signal has reached your vehicle, the precise engineering of your audio system ensures the best possible quality reproduction. However, in some cases the signal coming to your vehicle may not be strong and clear. This can be due to factors, such as the distance from the radio station, closeness of other strong radio stations or the presence of buildings, bridges or other large obstructions in the area.
Convenient features
5-140
AM (MW, LW) reception
OJF045309L
AM broadcasts can be received at greater distances than FM broadcasts. This is because AM radio waves are transmitted at low frequencies. These long, low frequency radio waves can follow the curvature of the earth rather than travelling straight out into the atmosphere. In addition, they curve around obstructions so that they can provide better signal coverage.
FM radio station
OJF045310L
FM broadcasts are transmitted at high frequencies and do not bend to follow the earths surface. Because of this, FM broadcasts generally begin to fade at short distances from the station. Also, FM signals are easily affected by buildings, mountains, or other obstructions. These can result in certain listening conditions which might lead you to believe a problem exists with your radio.
The following conditions are normal and do not indicate radio trouble :
JBM004
Fading - As your vehicle moves away from the radio station, the signal will weaken and sound will begin to fade. When this occurs, we suggest that you select another stronger station.
05
5-141
Flutter/Static - Weak FM signals or large obstructions between the transmitter and your radio can disturb the signal causing static or fluttering noises to occur. Reducing the treble level may lessen this effect until the disturbance clears.
OJF045311L
Station Swapping - As a FM signal weakens, another more powerful signal near the same frequency may begin to play. This is because your radio is designed to lock onto the clearest signal. If this occurs, select another station with a stronger signal.
Multi-Path Cancellation - Radio signals being received from several directions can cause distortion or fluttering. This can be caused by a direct and reflected signal from the same station, or by signals from two stations with close frequencies. If this occurs, select another station until the condition has passed.
Using a cellular phone or a twoway radio When a cellular phone is used inside the vehicle, noise may be produced from the audio system. This does not mean that something is wrong with the audio equipment. In such a case, use the cellular phone at a place as far as possible from the audio equipment.
NOTICE When using a communication system such as a cellular phone or a radio set inside the vehicle, a separate external antenna must be fitted. When a cellular phone or a radio set is used with an internal antenna alone, it may interfere with the vehicles electrical system and adversely affect safe operation of the vehicle.
WARNING Do not use a cellular phone while driving. Stop at a safe location to use a cellular phone.
Convenient features
5-142
iPod iPod is a registered trademark of Apple Inc.
Bluetooth Wireless Technology The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HYUNDAI is under license. Other trademarks and trade names are those of their respective owners.
A Bluetooth Wireless Technology enabled cell phone is required to use Bluetooth Wireless Technology.
05
5-143
USB Supported audio formats Audio file specification
- WAVeform audio format - MPEG1/2/2.5 Audio Layer3 - Windows Media Audio Ver 7.X/8.X
Bit rates - MPEG1 (Layer3):
32/40/48/56/64/80/96/112/128/160 /192/224/256/320 kbps
- MPEG2 (Layer3): 8/16/24/32/40/48/56/64/80/96/112 /128/144/160 kbps
- MPEG2.5 (Layer3): 8/16/24/32/40/48/56/64/80/96/112 /128/144/160 kbps
- WMA (High Range): 48/64/80/96/128/160/192 kbps
Bits Per Sample - WAV (PCM(Stereo)): 24 bit - WAV (IMA ADPCM): 4 bit - WAV (MS ADPCM): 4 bit
Sampling frequency - MPEG1: 44100/48000/32000 Hz - MPEG2: 22050/24000/16000 Hz - MPEG2.5: 11025/12000/8000 Hz - WMA: 32000/44100/48000 Hz - WAV: 44100/48000 Hz
Maximum length of folder/file names (Based on Unicode): 40 English or Korean characters
Supported characters for folder/ file names (Unicode support): 2,604 Korean characters, 94 alphanumeric characters, 4,888 Chinese characters in common use, 986 special characters
Maximum number of folders: 1,000 Maximum number of files: 5,000
NOTICE Files that are not in a supported
format may not be recognised or played, or information about them, such as the file name, may not be displayed properly.
Only files with .mp3/.wma/.wav extensions can be recognised by the system. If the file is not in supported format, change the file format by using the latest encoding software.
The device will not support files locked by DRM (Digital Rights Management).
For MP3/WMA compression files and WAV file, differences in sound quality will occur depending on the bitrate. (Music files with a higher bitrate have a better sound quality.)
Japanese or Simplified Chinese characters in folder or file names may not be displayed properly.
INFOTAINMENT SYSTEM SPECIFICATIONS
Convenient features
5-144
TRADEMARKS Supported USB storage devices Byte/Sector: 64 kbyte or less Format system: FAT12/16/32
(recommended), exFAT/NTFS
NOTICE Operation is guaranteed only for a
metal cover type USB storage device with a plug type connector. - USB storage devices with a plastic
plug may not be recognised. - USB storage devices in memory
card types, such as CF card or SD cards, may not be recognised.
USB hard disk drives may not be recognised.
When you use a large capacity USB storage device with multiple logical drives, only files stored on the first drive will be recognised.
If an application program is loaded on a USB storage device, the corresponding media files may not play.
Use USB 2.0 devices for better compatibility.
Bluetooth Bluetooth Power Class 2: -6 to 4 dBm Aerial power: Max 3 mW Frequency range: 2400 to 2483.5 MHz Bluetooth patch RAM software
version: 1
Other trademarks and trade names are those of their respective owners. The Bluetooth
word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HYUNDAI is under licence.
6
Before driving ....................................................................................................6-4 Before entering the vehicle ........................................................................................ 6-4 Before starting ............................................................................................................. 6-4
Ignition switch ................................................................................................... 6-5 Key ignition switch .......................................................................................................6-5 Key ignition switch positions ...................................................................................... 6-6 Starting the engine ....................................................................................................... 6-7
Engine Start/Stop button .................................................................................6-9 Engine Stop/Start button positions .......................................................................... 6-10 Starting the engine ...................................................................................................... 6-11 Turning off the engine ................................................................................................ 6-12 Remote start ............................................................................................................... 6-13
Automatic transmission ..................................................................................6-14 Automatic transmission operation ............................................................................ 6-14 LCD display message (button type) .......................................................................... 6-19 Paddle shifter (Manual shift mode) .......................................................................... 6-20 Good driving practices ............................................................................................... 6-21
Dual clutch transmission ................................................................................ 6-23 Dual clutch transmission operation ..........................................................................6-23 Parking ....................................................................................................................... 6-30 LCD display message (button type) ......................................................................... 6-30 Paddle shifter (Manual shifter mode) .......................................................................6-32 Good driving practices ..............................................................................................6-33
Braking system ................................................................................................ 6-34 Power-assist brakes ...................................................................................................6-34 Disc brakes wear indicator ........................................................................................6-34 Electronic Parking Brake (EPB) .................................................................................6-35 Auto Hold (if equipped) .............................................................................................6-39 Anti-lock Brake System (ABS) ................................................................................... 6-43 Electronic Stability Control (ESC) ............................................................................ 6-44 Vehicle Stability Management (VSM) ......................................................................6-47 Hill-Start Assist Control (HAC) ................................................................................. 6-48 Downhill Brake Control (DBC) ................................................................................. 6-48 Good braking practices .............................................................................................. 6-51
Four wheel drive (4WD) .................................................................................. 6-52 Four Wheel Drive (4WD) operation ...........................................................................6-53 Emergency precautions ............................................................................................ 6-58 Reducing the risk of a rollover .................................................................................. 6-59
6. Driving your vehicle
Driving your vehicle
6
Idle Stop and Go (ISG) ....................................................................................6-61 ISG system operation ................................................................................................. 6-61 ISG system off ............................................................................................................ 6-64 Forced to restart engine ........................................................................................... 6-64 ISG malfunction ......................................................................................................... 6-65
Drive mode integrated control system (2WD) ..............................................6-66 Drive mode ................................................................................................................ 6-66
Drive mode integrated control system (4WD) .............................................6-69 Drive mode ................................................................................................................ 6-69
Special driving conditions ...............................................................................6-72 Hazardous driving conditions ................................................................................... 6-72 Rocking the vehicle .................................................................................................... 6-72 Smooth cornering ......................................................................................................6-73 Driving at night ...........................................................................................................6-73 Driving in the rain .......................................................................................................6-73 Driving in flooded areas .............................................................................................6-74 Highway driving .........................................................................................................6-74 Reducing the risk of a rollover ...................................................................................6-74
Winter driving .................................................................................................. 6-75 Snow or icy conditions ...............................................................................................6-75 Winter precautions ..................................................................................................... 6-77
Trailer towing ................................................................................................... 6-79 If you decide to pull a trailer? ................................................................................... 6-80 Trailer towing equipment.......................................................................................... 6-83 Driving with a trailer .................................................................................................. 6-84 Maintenance when towing a trailer ..........................................................................6-87
Vehicle load limit.............................................................................................6-88 The Loading Information Label ................................................................................ 6-89
06
6-3
WARNING Carbon monoxide (CO) gas is toxic. Breathing CO can cause unconsciousness and death. Engine exhaust contains carbon monoxide which cannot be seen or smelled.
Do not inhale engine exhaust. If at any time you smell engine exhaust inside the vehicle, open the windows immediately. Exposure to CO can cause unconsciousness and death by asphyxiation.
Be sure the exhaust system does not leak. The exhaust system should be checked whenever the vehicle is raised to change the oil or for any other purpose. If you hear a change in the sound of the exhaust or if you drive over something that strikes the underneath side of the vehicle, we recommend that the exhaust system be checked as soon as possible by an authorized HYUNDAI dealer.
Do not run the engine in an enclosed area. Letting the engine idle in your garage, even with the garage door open, is a hazardous practice. Run the engine only long enough to start the engine and to move the vehicle out of the garage.
Avoid idling the engine for prolonged periods with people inside the vehicle. If it is necessary to idle the engine for a prolonged period with people inside the vehicle, be sure to do so only in an open area with the air intake set at Fresh and fan control set to high so fresh air is drawn into the interior.
Keep the air intakes clear. To assure proper operation of the ventilation system, keep the ventilation air intakes located in front of the windshield clear of snow, ice, leaves, or other obstructions.
If you must drive with the liftgate open: Close all windows. Open instrument panel air vents. Set the air intake control at Fresh, the air flow control at Floor or Face, and the fan control set to high.
WARNING CALIFORNIA PROPOSITION 65 WARNING Engine exhaust and a wide variety of automobile components including components found in the interior furnishings in a vehicle, contain or emit harmful chemicals known to the State of California to cause cancer and birth defects and reproductive harm. In addition, certain fluids contained in vehicles and certain products of components contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Driving your vehicle
6-4
Before entering the vehicle Be sure all windows, outside mirror(s),
and outside lights are clean and unobstructed.
Remove frost, snow, or ice. Visually check the tires for uneven
wear and damage. Check under the vehicle for any sign
of leaks. Be sure there are no obstacles behind
you if you intend to back up.
Before starting Make sure the hood, the liftgate, and
the doors are securely closed and locked.
Adjust the position of the seat and steering wheel.
Adjust the inside and side view mirrors.
Verify all the lights work. Fasten your seat belt. Check that all
passengers have fastened their seat belts.
Check the gauges and indicators in the instrument panel and the messages on the instrument display when the ignition switch is in the ON position.
Check that any items you are carrying are stored properly or fastened down securely.
WARNING To reduce the risk of SERIOUS INJURY or DEATH, take the following precautions: ALWAYS wear your seat belt. All
passengers must be properly belted whenever the vehicle is moving. For more information, refer to Seat Belts section in chapter 3.
Always drive defensively. Assume other drivers or pedestrians may be careless and make mistakes.
Stay focused on the task of driving. Driver distraction can cause accidents.
Leave plenty of space between you and the vehicle in front of you.
WARNING NEVER drink or take drugs and drive. Drinking or taking drugs and driving is dangerous and may result in an accident and SERIOUS INJURY or DEATH. Drunk driving is the number one contributor to the highway death toll each year. Even a small amount of alcohol will affect your reflexes, perceptions and judgment. Just one drink can reduce your ability to respond to changing conditions and emergencies and your reaction time gets worse with each additional drink. Driving while under the influence of drugs is as dangerous or more dangerous than driving under the influence of alcohol. You are much more likely to have a serious accident if you drink or take drugs and drive. If you are drinking or taking drugs, dont drive. Do not ride with a driver who has been drinking or taking drugs. Choose a designated driver or call a taxi.
BEFORE DRIVING
06
6-5
WARNING To reduce the risk of SERIOUS INJURY or DEATH, take the following precautions: NEVER allow children or any person
who is unfamiliar with the vehicle to touch the ignition switch or related parts. Unexpected and sudden vehicle movement can occur.
NEVER reach through the steering wheel for the ignition switch, or any other control, while the vehicle is in motion. The presence of your hand or arm in this area may cause a loss of vehicle control resulting in an accident.
Key ignition switch (if equipped)
OTM060051L
[A] : LOCK, [B] : ACC [C] : ON, [D] : START
Whenever the front door is opened, the ignition switch will illuminate, provided the ignition switch is not in the ON position. The light will go off immediately when the ignition switch is turned on or go off after about 30 seconds when the door is closed. (if equipped)
WARNING NEVER turn the ignition switch to
the LOCK or ACC position while the vehicle is in motion except in an emergency. This will result in the engine turning off and loss of power assist for the steering and brake systems. This may lead to loss of directional control and braking function, which could cause an accident.
Before leaving the driver's seat, always make sure the shift lever is in 1st gear (for manual transmission vehicle) or P (Park, for automatic transmission vehicle) position, apply the parking brake, and turn the ignition switch to the LOCK position. Unexpected vehicle movement may occur if these precautions are not followed.
NOTICE Never use aftermarket keyhole covers. This may generate start-up failure due to communication failure.
IGNITION SWITCH
Driving your vehicle
6-6
Key ignition switch positions
Switch Position Action Notes
LOCK
To turn the ignition switch to the LOCK position, push the key in at the ACC position and turn the key towards the LOCK position. The ignition key can be removed in the LOCK position. The steering wheel locks to protect the vehicle from theft. (if equipped)
ACC
Some electrical accessories are usable. The steering wheel unlocks.
If difficulty is experienced turning the ignition switch to the ACC position, turn the key while turning the steering wheel right and left to release.
ON
This is the normal key position when the engine has started. All features and accessories are usable. The warning lights can be checked when you turn the ignition switch from ACC to ON.
Do not leave the ignition switch in the ON position when the engine is not running to prevent the battery from discharging.
START
To start the engine, turn the ignition switch to the START position. The switch returns to the ON position when you let go of the key.
The engine will crank until you release the key.
06
6-7
Starting the engine
WARNING Always wear appropriate shoes when
operating your vehicle. Unsuitable shoes, such as high heels, ski boots, sandals, flip-flops, etc., may interfere with your ability to use the brake, accelerator and clutch pedals.
Do not start the vehicle with the accelerator pedal depressed. The vehicle can move which can lead to an accident.
Wait until the engine rpm is normal. The vehicle may suddenly move if the brake pedal is released when the rpm is high.
1. Make sure the parking brake is applied.
2. Make sure the shift lever/button is in P (Park).
3. Depress the brake pedal. 4. Turn the ignition switch to the START
position. Hold the key (maximum of 10 seconds) until the engine starts and release it.
Information Do not wait for the engine to warm up
while the vehicle remains stationary. Start driving at moderate engine speeds. (Steep accelerating and decelerating should be avoided.)
Always start the vehicle with your foot on the brake pedal. Do not depress the accelerator while starting the vehicle. Do not race the engine while warming it up.
NOTICE To prevent damage to the vehicle: Do not hold the ignition key in the
START position for more than 10 seconds. Wait 5 to 10 seconds before trying again.
Do not turn the ignition switch to the START position with the engine running. It may damage the starter.
If traffic and road conditions permit, you may put the shift lever in the N (Neutral) position while the vehicle is still moving and turn the ignition switch to the START position in an attempt to restart the engine.
Do not push or tow your vehicle to start the engine.
NOTICE If the engine does not start within 10 seconds after preheating is completed, turn the ignition switch once more to the LOCK position and wait for 10 seconds. Then turn the ignition switch to the ON position in order to preheat the engine again.
Driving your vehicle
6-8
NOTICE Do not turn off the engine immediately after it has been subjected to a heavy load. Doing so may cause severe damage to the engine or turbo charger unit.
NOTICE To prevent damage to the vehicle: Do not hold the ignition key in the
START position for more than 10 seconds. Wait 5 to 10 seconds before trying again.
Do not turn the ignition switch to the START position with the engine running. It may damage the starter.
If traffic and road conditions permit, you may put the shift lever in the N (Neutral) position while the vehicle is still moving and turn the ignition switch to the START position in an attempt to restart the engine.
Do not push or tow your vehicle to start the engine.
06
6-9
EngInE sTART/sTOp bUTTOn (IF EQUIppED)
OTM060001
Whenever the front door is opened, the Engine Start/Stop button will illuminate and will go off 30 seconds after the door is closed.
WARNING To turn the vehicle off in an emergency: Press and hold the Engine Start/Stop button for more than two seconds OR Rapidly press and release the Engine Start/Stop button three times (within three seconds). If the vehicle is still moving, you can restart the vehicle without depressing the brake pedal by pressing the Engine Start/Stop button with the gear in the N (Neutral) position.
WARNING NEVER press the Engine Start/Stop
button while the vehicle is in motion except in an emergency. This will result in the vehicle turning off and loss of power assist for the steering and brake systems. This may lead to loss of directional control and braking function, which could cause an accident.
Before leaving the drivers seat, always make sure the gear is in the P (Park) position, set the parking brake, press the Engine Start/Stop button to the OFF position, and take the Smart Key with you. Unexpected vehicle movement may occur if these precautions are not followed.
NEVER reach through the steering wheel for the Engine Start/Stop button or any other control while the vehicle is in motion. The presence of your hand or arm in this area may cause a loss of vehicle control resulting in an accident.
Driving your vehicle
6-10
Engine Stop/Start button positions
Button Position Action Notes
OFF
To turn off the engine, press the Engine Start/Stop button with the vehicle shifted to P (Park). Note if the Engine Start/Stop button is pressed with the vehicle shifted to D (Drive) or R (Reverse), the gear will automatically shift to P (Park). If the Engine Start/Stop button is pressed with the gear shifted to N (Neutral), the Engine Start/ Stop button will change to the ACC position. The steering wheel locks to protect the vehicle from theft.
If the steering wheel is not locked properly when you open the drivers door, the warning chime will sound.
ACC
Press the Engine Start/Stop button when the button is in the OFF position without depressing the brake pedal. Some of the electrical accessories are usable. The steering wheel unlocks.
If you leave the Engine Start/Stop button in the ACC position for more than one hour, the battery power will turn off automatically to prevent the battery from discharging.
If the steering wheel doesnt unlock properly, the Engine Start/ Stop button will not work. Press the Engine Start/Stop button while turning the steering wheel right and left to release.
ON
Press the Engine Start/Stop button while it is in the ACC position without depressing the brake pedal. The warning lights can be checked before the engine is started.
Do not leave the Engine Start/Stop button in the ON position when the engine is not running to prevent the battery from discharging.
START
To start the engine, depress the brake pedal and press the Engine Start/ Stop button with the gear shifted to the P (Park) or the N (Neutral) position. For your safety, start the engine with the gear shifted to the P (Park) position.
If you press the Engine Start/Stop button without depressing the brake pedal, the engine does not start and the Engine Start/Stop button changes as follows: OFF ACC ON OFF or ACC
06
6-11
Starting the engine
WARNING Always wear appropriate shoes when
operating your vehicle. Unsuitable shoes, such as high heels, ski boots, sandals, flipflops, etc., may interfere with your ability to use the brake and accelerator pedals.
Do not start the vehicle with the accelerator pedal depressed. The vehicle can move which can lead to an accident.
Wait until the engine rpm is normal. The vehicle may suddenly move if the brake pedal is released when the rpm is high.
Information The vehicle will start by pressing the
Engine Start/Stop button, only when the smart key is in the vehicle.
Even if the smart key is in the vehicle, and when it is far away from the driver, the engine may not start.
When the Engine Start/Stop button is in the ACC or ON position, if any door is open, the system checks for the smart key. When the smart key is not in the vehicle, the indicator will blink and the warning 'Key not in vehicle' will come on. When all doors are closed, the chime will also sound for about 5 seconds. Keep the smart key in the vehicle.
Starting the gasoline engine 1. Always carry the smart key with you. 2. Make sure the parking brake is
applied. 3. Make sure the shift lever/button is in
P(Park). 4. Depress the brake pedal. 5. Press the Engine Start/Stop button.
Information Do not wait for the engine to warm up
while the vehicle remains stationary. Start driving at moderate engine speeds. Steep accelerating and decelerating should be avoided.
Always start the vehicle with your foot on the brake pedal. Do not depress the accelerator while starting the vehicle. Do not race the engine while warming it up.
Information If the Engine Start/Stop button is pressed while the engine is pre-heating, the engine may start.
Driving your vehicle
6-12
NOTICE Do not turn off the engine immediately after it has been subjected to a heavy load. Doing so may cause severe damage to the engine or turbo charger unit.
NOTICE To prevent damage to the vehicle: If the engine stalls while you are in
motion, do not attempt to shift the gear to the P (Park) position. If traffic and road conditions permit, you may put the gear in N (Neutral) while the vehicle is still moving and press the Engine Start/Stop button in an attempt to restart the engine.
Do not push or tow your vehicle to start the vehicle.
NOTICE To prevent damage to the vehicle: Do not press the Engine Start/Stop button for more than 10 seconds except when the stop lamp fuse is blown. When the stop lamp fuse is blown, you cannot normally start the engine. Replace the fuse with a new one. If you are not able to replace the fuse, you can start the engine by pressing and holding the Engine Start/Stop button for 10 seconds with the Engine Start/ Stop button in the ACC position. For your safety always depress the brake pedal before starting the vehicle.
OTM060002
Information If the smart key battery is weak or the smart key does not work correctly, you can start the vehicle by pressing the Engine Start/Stop button with the smart key in the direction of the picture above.
Turning off the engine 1. Stop the vehicle and depress the
brake pedal fully. 2. Make sure the shift lever/button is in
P(Park). 3. Press the Engine Start/Stop button
to the OFF position and apply the parking brake.
06
6-13
Remote start (if equipped) Type A
OTM060003
Type B
OTM060004
You can start the vehicle using the Remote Start button of the smart key.
To start the vehicle remotely: 1. Press the door lock button within 10 m
(32 feet) from the vehicle. 2. Press the remote start ( ) button for
over 2 seconds within 4 seconds after locking the doors. The hazard warning lights will blink.
3. To turn off the remote start function, press the remote start ( ) button once.
The remote start ( ) button may not operate if the smart key is not within 10 m (32 feet).
The vehicle will not remotely start if the engine hood or liftgate is opened.
The vehicle must be in P (Park) for the remote start function to start.
The engine turns off if you get in the vehicle without a registered smart key.
The engine turns off if you do not get in the vehicle within 10 minutes after remotely starting the vehicle.
Do not idle the engine for a long period.
Driving your vehicle
6-14
OTM060005
Automatic transmission operation The automatic transmission has eight forward speeds and one reverse speed. The Individual forward speeds are selected automatically in the D (Drive) position.
AUTOmATIC TRAnsmIssIOn (IF EQUIppED)
06
6-15
The indicator in the instrument cluster displays the shift lever/button position when the ignition switch is in the ON position.
WARNING To reduce the risk of serious injury or death: ALWAYS check the surrounding
areas near your vehicle for people, especially children, before shifting a vehicle into D (Drive) or R (Reverse).
Before leaving the drivers seat, always make sure the shift lever is in the P (Park) position, then set the parking brake, and place the ignition switch in the LOCK/OFF position. Unexpected and sudden vehicle movement can occur if these precautions are not followed.
When using the paddle shifter (manual shift mode), do not use engine braking (shifting from a high gear to lower gear) rapidly on slippery roads. The vehicle may slip causing an accident.
P (Park) Always come to a complete stop before shifting into P (Park). To shift from P (Park), you must depress firmly on the brake pedal and make sure your foot is off the accelerator pedal. If you have done all of the above and still cannot shift the lever out of P (Park), see "Shift-Lock Release" in this chapter. (shift lever type) The shift lever/button must be in P (Park) before turning the engine off.
WARNING Shifting into P (Park) while the
vehicle is in motion may cause you to lose control of the vehicle.
After the vehicle has stopped, always make sure the shift lever is in P (Park), apply the parking brake, and turn the engine off.
When parking on an incline, shift the gear to P (Park) and apply the parking brake to prevent the vehicle from rolling downhill.
Do not use the P (Park) position in place of the parking brake.
R (Reverse) Use this position to drive the vehicle backward.
NOTICE Always come to a complete stop before shifting into or out of R (Reverse); you may damage the transmission if you shift into R (Reverse) while the vehicle is in motion. When the vehicle is stopped in R (Reverse) or D (Drive) position, if you open the drivers door with the seat belt unfastened, the gear is shifted to P (Park) position automatically. However when the vehicle moves in R (Reverse) or D (Drive) position, if you open the drivers door with the seat belt unfastened, the gear may be not shifted to P (Park) position automatically for protecting the automatic transmission.
Driving your vehicle
6-16
N (Neutral) The wheels and transmission are not engaged. Use N (Neutral) if you need to restart a stalled engine, or if it is necessary to stop with the engine ON. Shift into P (Park) if you need to leave your vehicle for any reason. Always depress the brake pedal when you are shifting from N (Neutral) to another gear.
WARNING Do not shift into gear unless your foot is firmly on the brake pedal. Shifting into gear when the engine is running at high speed can cause the vehicle to move very rapidly. You could lose control of the vehicle and hit people or objects.
To stay in N (Neutral) when vehicle is OFF (button type)
OTM060006
OTM060060L
If you want to stay in N (Neutral) after the engine is OFF (in the ACC state), do the following. 1. Turn off Auto Hold and release
Electronic Parking Brake when the engine is running.
2. Push the N (neutral) button while depressing the brake pedal.
3. When you take your foot off the brake pedal, the message Press and hold OK button to stay in Neutral when vehicle is Off (or 'Hold OK button to stay in neutral gear position when vehicle is Off') will appear on the cluster LCD display.
06
6-17
4. Press and hold the OK button on the steering wheel for more than 1 second.
5. When the message Vehicle will stay in (N). Change gear to cancel (or N will stay engaged when the vehicle is Off) will appear on the cluster LCD display, press the Engine Start/Stop button while depressing the brake pedal. However, if you open the driver's door, the gear will automatically shift to P (Park) and the Engine Start/ Stop button will change to the OFF position.
NOTICE With the gear in N (Neutral) the Engine Start/Stop button will be in the ACC position. Note that the doors cannot be locked in the ACC position. The battery may discharge if left in the ACC position for a long period.
D (Drive) This is the normal driving position. The transmission will automatically shift through an 8-gear sequence, providing the best fuel economy and power. To start the vehicle forward, push the D (Drive) button by depressing the brake pedal with the engine ON. (button type) Then depress the accelerator pedal smoothly. For extra power when passing another vehicle or driving uphill, depress the accelerator fully. The transmission will automatically downshift to the next lower gear (or gears, as appropriate). When the vehicle is stopped in D (Drive) position, if you open the drivers door with the seat belt unfastened, the gear is shifted to P (Park) position automatically. (button type) However while the vehicle is moving in D (Drive) position, if you open the drivers door with the seat belt unfastened, the gear may not shift to P (Park) position automatically to protect the automatic transmission. The DRIVE MODE switch, located on the shift lever console, allows the driver to switch from NORMAL/COMFORT mode to SPORT or ECO mode. (if equipped)
For more Details, refer to "Drive Mode Integrated Control System" later in this chapter.
Driving your vehicle
6-18
Shift-lock system For your safety, the automatic transmission has a shift-lock system which prevents shifting the transmission from P (Park) into R (Reverse) unless the brake pedal is depressed. To shift the transmission from P (Park) into R (Reverse): 1. Depress and hold the brake pedal. 2. Start the engine or place the ignition
switch in the ON position. 3. Depress the brake pedal and push the
R (Reverse) button. (button type)
Ignition key interlock system (if equipped) The ignition key cannot be removed unless the shift lever is in the P (Park) position.
When the battery is discharged: The shift buttons will not function when the battery is discharged. In emergencies, do the following to move the shift button to N (Neutral) on a level ground. 1. Connect the battery cables from
another vehicle or from a another battery to the jump-starting terminals inside the engine compartment. For more details, refer to Jump Starting in chapter 7.
2. Release the parking brake with the ignition switch in the ON position.
3. Shift the gear to the N(Neutral) position refer to the Stay in Neutral when vehicle is Off in this chapter.
Parking Always come to a complete stop and continue to depress the brake pedal. Move the shift lever/button into the P (Park) position, apply the parking brake, and place the ignition switch in the LOCK/OFF position. Take the Key with you when exiting the vehicle.
WARNING When you stay in the vehicle with the engine running, be careful not to depress the accelerator pedal for a long period of time. The engine or exhaust system may overheat and start a fire. The exhaust gas and the exhaust system are very hot. Keep away from the exhaust system components. Do not stop or park over flammable materials, such as dry grass, paper or leaves. They may ignite and cause a fire.
06
6-19
LCD display message (button type) Shifting conditions not met. Reduce speed, then shift The warning message appears on the LCD display, when engine RPM is too high, or when driving speed is too fast to shift the gear. We recommend you decrease the engine speed or slow down before shifting the gear.
Press brake pedal to change gear The warning message appears on the LCD display, when the brake pedal is not depressed while shifting the gear. We recommend you to depress the brake pedal and then shift the gear.
Shift to P after stopping The warning message appears on the LCD display, when the gear is shifted to P (Park) while the vehicle is moving. Stop the vehicle before shifting to P (Park).
PARK engaged The warning message appears on the LCD display, when the gear is shifted to P (Park) while the vehicle is moving. Stop the vehicle before shifting to P (Park).
Press and hold the OK button on the steering wheel to stay in Neutral The warning message appears on the LCD display, when pushing the N(Neutral) button. If you want to stay N(Neutral) after turning off the engine, press and hold the OK button on the steering wheel more than 1 second.
Vehicle will stay in (N). Change gear to cancel The warning message appears on the LCD display, when pushing the OK button on the steering wheel after the message (Press and hold OK button to stay in Neutral when vehicle is Off) appears on the cluster LCD display. The gear stays in N(Neutral) position after turning off the engine.
NEUTRAL engaged The message appears on the LCD display, when the N (Neutral) position is engaged.
Gear already selected The message appears on the LCD display, when pushing the current shift button again.
Driving your vehicle
6-20
Shift button held down The warning message appears on the LCD display, when the shift button is pressed continuously or the shift button does not properly operate. Clean the surroundings of gear shift button. If this message appears again, we recommend you to have the vehicle inspected by an authorized HYUNDAI dealer.
Shifter system malfunction! Service immediately The warning message appears on the LCD display, when the transmission or the shift button does not properly operate in the P (Park) position. In this case, we recommend you to immediately have the vehicle inspected by an authorized HYUNDAI dealer.
Check shift controls The warning message appears on the LCD display, when there is a malfunction with transmission shift button. In this case, we recommend you to immediately have the vehicle inspected by an authorized HYUNDAI dealer.
Paddle shifter (Manual shift mode)
OTM058130L
The paddle shifter is available when the shift button is in the D (Drive) position or the manual shift mode.
With the shift lever/button in the D position The paddle shifter will operate when the vehicle speed is more than 6 mph. Pull the [+] or [-] paddle shifter once to shift up or down one gear and the system changes from automatic mode to manual shift mode. In the manual shift mode, pull the [+] or [-] paddle shifter once to shift up or down one gear. To change back to automatic shift mode from manual shift mode, do one of the followings : - Pull the [+] paddle shifter for more
than one second - Press the D button.
06
6-21
The manual shift mode also changes back to automatic shift mode in one of following situations - When the accelerator pedal is gently
depressed for more than 6 seconds while driving
- When the vehicle stops
Information If the [+] and [-] paddle shifters are pulled at the same time, gear shift may not occur.
Good driving practices Never move the shift button from
P (Park) or N (Neutral) to any other position with the accelerator pedal depressed.
Never move the shift lever/button into P (Park) when the vehicle is in motion. Be sure the vehicle is completely stopped before you attempt to shift into R (Reverse) or D (Drive).
Do not move the shift button to N (Neutral) when driving. Doing so may result in an accident because of a loss of engine braking and the transmission could be damaged.
Driving uphill or downhill, Shift to D (Drive) to drive forward or R (Reverse) to drive backwards, and check the gear position indicated on the cluster before driving. If you drive in the opposite direction of the selected gear, the engine will turn off and a serious accident might be occurred due to the degraded brake performance.
Do not drive with your foot resting on the brake pedal. Even light, but consistent pedal pressure can result in the brakes overheating, brake wear and possibly even brake failure.
When driving with shifter paddles, slow down before shifting to a lower gear. Otherwise, the lower gear may not be engaged if the engine rpms are outside of the allowable range.
Always apply the parking brake when leaving the vehicle. Do not depend on placing the transmission in P (Park) to keep the vehicle from moving.
Driving your vehicle
6-22
Exercise extreme caution when driving on a slippery surface. Be especially careful when braking, accelerating or shifting gears. On a slippery surface, an abrupt change in vehicle speed can cause the drive wheels to lose traction and may cause loss of vehicle control resulting in an accident.
Optimum vehicle performance and economy is obtained by smoothly depressing and releasing the accelerator.
WARNING To reduce the risk of SERIOUS INJURY or DEATH: ALWAYS wear your seatbelt. In a
collision, an unbelted occupant is significantly more likely to be seriously injured or killed than a properly belted occupant.
Avoid high speeds when cornering or turning.
Do not make quick steering wheel movements, such as sharp lane changes or fast, sharp turns.
The risk of rollover is greatly increased if you lose control of your vehicle at highway speeds.
Loss of control often occurs if two or more wheels drop off the roadway and the driver over steers to reenter the roadway.
In the event your vehicle leaves the roadway, do not steer sharply. Instead, slow down before pulling back into the travel lanes.
HYUNDAI recommends you follow all posted speed limits.
06
6-23
DUAL CLUTCh TRAnsmIssIOn (IF EQUIppED)
OTM060005
Dual clutch transmission operation The dual clutch transmission has eight forward speeds and one reverse speed. The individual speeds are selected automatically when the shift button is in the D (Drive) position.
Driving your vehicle
6-24
The dual clutch transmission can be thought of as an automatically shifting manual transmission. It gives the driving feel of a manual transmission, yet provides the ease of a fully automatic transmission.
When D (Drive) is selected, the transmission will automatically shift through the gears similar to a conventional automatic transmission. Unlike a traditional automatic transmission, the gear shifting can sometimes be felt and heard as the actuators engage the clutches and the gears are selected.
The dual clutch transmission incorporates a wet-type dual clutch mechanism, which allows for better acceleration performance and increased fuel efficiency while driving. But it differs from a conventional automatic transmission because it does not incorporate a torque converter. Instead, the transition from one gear to the next is managed by clutch slip, especially at lower speeds. As a result, shifts are sometimes more noticeable, and a light vibration can be felt as the transmission shaft speed is matched with the engine shaft speed. This is a normal condition of the dual clutch transmission.
The wet-type clutch transfers torque more directly and provides a direct- drive feeling which may feel different from a conventional automatic transmission. This may be more noticeable when launching the vehicle from a stop or when traveling at low, stop-and-go vehicle speeds.
When rapidly accelerating from a lower vehicle speed, the engine rpm may increase dramatically as a result of clutch slip as the dual clutch transmission selects the correct gear. This is a normal condition.
When accelerating from a stop on an incline, press the accelerator smoothly and gradually to avoid any shudder feeling or jerkiness.
When traveling at a lower vehicle speed, if you release the accelerator pedal quickly, you may feel engine braking before the transmission changes gears. This engine braking feeling is similar to operating a manual transmission at low speed.
When driving downhill, you may wish to move the gear shift lever/button to Manual Shift mode and downshift to a lower gear in order to control your speed without using the brake pedal excessively.
When you turn the engine on and off, you may hear clicking sounds as the system goes through a self-test. This is a normal sound for the dual clutch transmission.
During the first 1000 miles (1,500km), you may feel that the vehicle may not be smooth when accelerating at low speed. During this break-in period, the shift quality and performance of your new vehicle is continuously optimized.
06
6-25
WARNING To reduce the risk of serious injury or death: ALWAYS check the surrounding
areas near your vehicle for people, especially children, before shifting a vehicle into D (Drive) or R (Reverse).
Before leaving the drivers seat, always make sure the shift button is in the P (Park) position, then set the parking brake, and place the ignition switch in the LOCK/OFF position. Unexpected and sudden vehicle movement can occur if these precautions are not followed.
Do not use aggressive engine braking (shifting from a higher gear to a lower gear) on slippery roads. This could cause the tires to slip and may result in an accident.
NOTICE Always come to a complete stop
before shifting into D (Drive) or R (Reverse).
Do not put the shift lever/button in N (Neutral) while driving.
WARNING Due to transmission failure, you may not continue to drive and the position indicator and the position indicator (D, P) on the instrument cluster will blink. We recommend that you contact an authorized HYUNDAI dealer and have the system checked.
DCT warning messages This warning message is displayed when vehicle is driven slowly on a grade and the vehicle detects that the brake pedal is not applied.
OOSH069010L
Steep grade! Press brake pedal Driving up hills or on steep grades: To hold the vehicle on an incline use
the foot brake or the parking brake. When in stop-and-go traffic on an
incline, allow a gap to form ahead of you before moving the vehicle forward. Then hold the vehicle on the incline with the foot brake.
If the vehicle is held or creeping forward on an incline by applying the accelerator pedal, the clutch and transmission may overheat which can result in damage. At this time, a warning message will appear on the LCD display.
If the LCD warning is active, the foot brake must be applied.
Ignoring the warnings can lead to damage to the transmission.
Driving your vehicle
6-26
OOSH069012L
Transmission high temperature Under certain conditions, such as
repeated stop-and-go launches on steep grades, sudden take off or acceleration, or other harsh driving conditions, the transmission clutch temperatures will increase excessively.
When the clutch temperatures are too high, the Transmission temp. is high! Stop safely warning message will appear on the LCD display, a chime will sound, and the transmission shifting may not be smooth.
If this occurs, pull over to a safe location, stop the vehicle with the engine running, apply the brakes and shift the vehicle to P (Park), and allow the transmission to cool.
If you ignore this warning, the driving condition may become worse. You may experience abrupt shifts, frequent shifts, or jerkiness.
When the message Trans cooled. Resume driving. appears you can continue to drive your vehicle.
When possible, drive the vehicle smoothly.
Type A Type B
OTMA060009 OOSH069013L
OTMA060010
Transmission overheated If the vehicle continues to be driven
and the clutch temperatures reach the maximum temperature limit, the Transmission Hot! Park with engine on warning will be displayed. When this occurs the clutch is disabled until the clutch cools to normal temperatures.
The warning will display a time to wait for the transmission to cool.
If this occurs, pull over to a safe location, stop the vehicle with the engine running, apply the brakes and shift the vehicle to P (Park), and allow the transmission to cool.
06
6-27
When the message Trans cooled. Resume driving. appears you can continue to drive your vehicle.
When possible, drive the vehicle smoothly.
If any of the warning messages in the LCD display continue to blink, for your safety, we recommend that you contact an authorized HYUNDAI dealer and have the system checked.
Transmission ranges The indicator in the instrument cluster displaystheshiftleverbuttonposition when the ignition switch is in the ON position.
P (Park) Always come to a complete stop before shifting into P (Park). To shift from P (Park), you must depress firmly on the brake pedal and make sure your foot is off the accelerator pedal. The shift lever/button must be in P (Park) before turning the engine off.
WARNING Shifting into P (Park) while the
vehicle is in motion may cause you to lose control of the vehicle.
After the vehicle has stopped, always make sure the shift lever/button is in P (Park), apply the parking brake, and turn the engine off.
When parking on an incline, place the shift lever/button in P (Park) and apply the parking brake to prevent the vehicle from rolling downhill.
For safety, always engage the parking brake with the shift lever/ button in the P (Park) position except for the case of emergency parking.
R (Reverse) Use this position to drive the vehicle backward.
NOTICE Always come to a complete stop before shifting into or out of R (Reverse); you may damage the transmission if you shift into R (Reverse) while the vehicle is in motion.
When the vehicle is stopped in R (Reverse) position, if you open the drivers door with the seat belt unfastened, the gear is shifted to P (Park) position automatically. However if the vehicle is moving in R(Reverse) position, if the driver's door is opened with the seat belt unfastened, the gear may not be shifted into P (Park) position automatically to protect the dual clutch transmission.
N (Neutral) The wheels and transmission are not engaged. Use N (Neutral) if you need to restart a stalled engine, or if it is necessary to stop with the engine ON. Shift into P (Park) if you need to leave your vehicle for any reason. Always depress the brake pedal when you are shifting from N (Neutral) to another gear.
WARNING Do not shift into gear unless your foot is firmly on the brake pedal. Shifting into gear when the engine is running at high speed can cause the vehicle to move very rapidly. You could lose control of the vehicle and hit people or objects.
Driving your vehicle
6-28
To stay in N (Neutral) when vehicle is OFF (button type)
OTM060006
OTM040050
If you want to stay in N (Neutral) after the engine is OFF (in the ACC state), do the following. 1. Turn off Auto Hold and release
Electronic Parking Brake when the engine is running.
2. Push the N(Neutral) button by depressing the brake pedal. If the message (Press and hold the OK button on the steering wheel to stay in Neutral ) appears on the cluster LCD display, press and hold the OK button on the steering wheel for more than 1 second.
3. When the message Vehicle will stay in (N). Change gear to cancel (or N will stay engaged when the vehicle is Off) will appear on the cluster LCD display, press the Engine Start/Stop button while depressing the brake pedal. However, if you open the driver's door, the gear will automatically shift to P (Park) and the Engine Start/ Stop button will change to the OFF position.
NOTICE With the gear in N (Neutral) the Engine Start/Stop button will be in the ACC position. Note that the doors cannot be locked in the ACC position or the battery may discharge if left in the ACC position for a long period.
06
6-29
D (Drive) This is the normal driving position. The transmission will automatically shift through a 8-gear sequence, providing the best fuel economy and power. To start the vehicle forward, push the D (Drive) button by depressing the brake pedal with the engine ON. Then depress the accelerator pedal smoothly. For extra power when passing another vehicle or driving uphill, depress the accelerator fully. The transmission will automatically downshift to the next lower gear (or gears, as appropriate). When the vehicle is stopped in D (Drive) position, if you open the drivers door with the seat belt unfastened, the gear is shifted to P (Park) position automatically. However when the vehicle moves in D (Drive) position, if you open the drivers door with the seat belt unfastened, the gear may be not shifted to P (Park) position automatically for protecting the dual clutch transmission. The DRIVE MODE switch, located on the shift lever/button console, allows the driver to switch from NORMAL/ COMFORT mode to SPORT or ECO mode. (if equipped) For more details, refer to Drive Mode Integrated Control System later in this chapter.
Shift-lock system For your safety, the automatic transmission has a shift-lock system which prevents shifting the transmission from P (Park) or N (Neutral) to R (Reverse) or D (Drive) unless the brake pedal is depressed. To shift the transmission from P (Park) into R (Reverse): 1. Depress and hold the brake pedal. 2. Start the engine or place the ignition
switch in the ON position. 3. Depress the brake pedal and move the
shift lever to R (Reverse). (shift lever type) Depress the brake pedal and push the R (Reverse) button. (shift button type)
When the battery is discharged: The shift buttons will not function when the battery is discharged. In emergencies, do the following to move the shift lever/button to N (Neutral) on a level ground. 1. Connect the battery cables from
another vehicle or from a another battery to the jump-starting terminals inside the engine compartment. For more details, refer to Jump Starting in chapter 7.
2. Release the parking brake with the ignition switch in the ON position.
3. Shift the gear to the N(Neutral) position refer to the Stay in Neutral when vehicle is Off in this chapter.
Driving your vehicle
6-30
Parking Always come to a complete stop and continue to depress the brake pedal. Press the P (Park) button, apply the parking brake, and place the ignition switch in the LOCK/OFF position. Take the Key with you when exiting the vehicle.
WARNING When you stay in the vehicle with the engine running, be careful not to depress the accelerator pedal for a long period of time. The engine or exhaust system may overheat and start a fire. The exhaust gas and the exhaust system are very hot. Keep away from the exhaust system components. Do not stop or park over flammable materials, such as dry grass, paper or leaves. They may ignite and cause a fire.
LCD display message (button type) Shifting conditions not met. Reduce speed, then shift The warning message appears on the LCD display, when engine RPM is too high, or when driving speed is too fast to shift the gear. We recommend you decrease the engine speed or slow down before shifting the gear.
Press brake pedal to change gear The warning message appears on the LCD display, when the brake pedal is not depressed while shifting the gear. We recommend you to depress the brake pedal and then shift the gear.
Shift to P after stopping The warning message appears on the LCD display, when the gear is shifted to P (Park) while the vehicle is moving. Stop the vehicle before shifting to P (Park).
PARK engaged The warning message appears on the LCD display, when the gear is shifted to P (Park) while the vehicle is moving. Stop the vehicle before shifting to P (Park).
06
6-31
Press and hold the OK button on the steering wheel to stay in Neutral The warning message appears on the LCD display, when pushing the N(Neutral) button. If you want to stay N(Neutral) after turning off the engine, press and hold the OK button on the steering wheel more than 1 second.
Vehicle will stay in (N). Change gear to cancel The warning message appears on the LCD display, when pushing the OK button on the steering wheel after the message (Press and hold OK button to stay in Neutral when vehicle is Off) appears on the cluster LCD display. The gear stays in N(Neutral) position after turning off the engine.
NEUTRAL engaged The message appears on the LCD display, when the N (Neutral) position is engaged.
Gear already selected The message appears on the LCD display, when pushing the current shift button again.
Shift button held down The warning message appears on the LCD display, when the shift button is pressed continuously or the shift button does not properly operate. Clean the surroundings of gear shift button. If this message appears again, we recommend you to have the vehicle inspected by an authorized HYUNDAI dealer.
Shifter system malfunction! Service immediately The warning message appears on the LCD display, when the transmission or the shift button does not properly operate in the P (Park) position. In this case, we recommend you to immediately have the vehicle inspected by an authorized HYUNDAI dealer.
Check shift controls The warning message appears on the LCD display, when there is a malfunction with transmission shift button. In this case, we recommend you to immediately have the vehicle inspected by an authorized HYUNDAI dealer.
Driving your vehicle
6-32
Paddle shifter (Manual shifter mode)
OOSH069012L
The paddle shifter is available when the shift button is in the D (Drive) position or the manual shift mode.
With the shift lever/button in the D position The paddle shifter will operate when the vehicle speed is more than 6 mph. Pull the [+] or [-] paddle shifter once to shift up or down one gear and the system changes from automatic mode to manual shift mode. In the manual shift mode, pull the [+] or [-] paddle shifter once to shift up or down one gear.
To change back to automatic shift mode from manual shift mode, do one of the followings: Pull the [+] paddle shifter for more than one second Press the D button. The manual shift mode also changes back to automatic shift mode in one of following situations - When the accelerator pedal is gently
depressed for more than 6 seconds while driving
- When the vehicle stops
Information If the [+] and [-] paddle shifters are pulled at the same time, gear shift may not occur.
06
6-33
Good driving practices Never move the shift lever/button
from P (Park) or N (Neutral) to any other position with the accelerator pedal depressed.
Never move the shift lever/button into P (Park) when the vehicle is in motion. Be sure the vehicle is completely stopped before you attempt to shift into R (Reverse) or D (Drive).
Do not move the shift lever/button to N (Neutral) when driving. Doing so may result in an accident because of a loss of engine braking and the transmission could be damaged.
Do not drive with your foot resting on the brake pedal. Even light, but consistent pedal pressure can result in the brakes overheating, brake wear and possibly even brake failure.
Always apply the parking brake when leaving the vehicle. Do not depend on placing the transmission in P (Park) to keep the vehicle from moving.
Exercise extreme caution when driving on a slippery surface. Be especially careful when braking, accelerating or shifting gears. On a slippery surface, an abrupt change in vehicle speed can cause the drive wheels to lose traction and may cause loss of vehicle control resulting in an accident.
Optimum vehicle performance and economy is obtained by smoothly depressing and releasing the accelerator.
WARNING To reduce the risk of SERIOUS INJURY or DEATH: ALWAYS wear your seatbelt. In a
collision, an unbelted occupant is significantly more likely to be seriously injured or killed than a properly belted occupant.
Avoid high speeds when cornering or turning.
Do not make quick steering wheel movements, such as sharp lane changes or fast, sharp turns.
The risk of rollover is greatly increased if you lose control of your vehicle at highway speeds.
Loss of control often occurs if two or more wheels drop off the roadway and the driver over steers to reenter the roadway.
In the event your vehicle leaves the roadway, do not steer sharply. Instead, slow down before pulling back into the travel lanes.
HYUNDAI recommends you follow all posted speed limits.
Driving your vehicle
6-34
Power-assist brakes Your vehicle has power-assisted brakes that adjust automatically through normal usage. If the engine is not running or is turned off while driving, the power assist for the brakes will not work. You can still stop your vehicle by applying greater force to the brake pedal than typical. The stopping distance, however, will be longer than with power brakes. When the engine is not running, the reserve brake power is partially depleted each time the brake pedal is applied. Do not pump the brake pedal when the power assist has been interrupted.
WARNING Take the following precautions: Do not drive with your foot resting
on the brake pedal. This will create abnormal high brake temperatures, excessive brake lining and pad wear, and increased stopping distances.
When descending down a long or steep hill, use the paddle shifter and manually downshift to a lower gear in order to control your speed without using the brake pedal excessively. Applying the brakes continuously will cause the brakes to overheat and could result in a temporary loss of braking performance.
Wet brakes may impair the vehicle's ability to safely slow down; the vehicle may also pull to one side when the brakes are applied. Applying the brakes lightly will indicate whether they have been affected in this way. Always test your brakes in this fashion after driving through deep water. To dry the brakes, lightly tap the brake pedal to heat up the brakes while maintaining a safe forward speed until brake performance returns to normal. Avoid driving at high speeds until the brakes function correctly.
Disc brakes wear indicator When your brake pads are worn and new pads are required, you will hear a high pitched warning sound from your front or rear brakes. You may hear this sound come and go or it may occur whenever you depress the brake pedal. Note that some driving conditions or climates may cause a brake squeal when you first apply (or lightly apply) the brakes. This is normal and does not indicate a problem with your brakes.
NOTICE To avoid costly brake repairs, do not continue to drive with worn brake pads.
Information Always replace brake pads as complete front or rear axle sets.
BRAKING SYSTEM
06
6-35
Electronic Parking Brake (EPB) Applying the parking brake
OTM060007
To apply EPB (Electronic Parking Brake): 1. Depress and hold the brake pedal. 2. Pull up the EPB switch. Make sure the Parking Brake warning light comes on.
EPB (Electronic Parking Brake) may be automatically applied when: Requested by other systems The driver turns the vehicle off while
Auto Hold is operating.
Emergency braking If there is a problem with the brake pedal while driving, emergency braking is possible by pulling up and holding the EPB switch. Braking is possible only while you are holding the EPB switch. However, braking distance will be longer than normal.
WARNING To reduce the risk of SERIOUS INJURY or DEATH, do not operate the EPB while the vehicle is moving except in an emergency situation. It could damage the brake system and lead to an accident.
Information During emergency braking, the Parking Brake warning light will illuminate to indicate that the system is operating.
NOTICE If you continuously notice a noise or burning smell when the EPB is used for emergency braking, we recommend that you have the system checked by an authorized HYUNDAI dealer.
Driving your vehicle
6-36
Releasing the parking brake
OTM060048L
To release EPB (Electronic Parking Brake): 1. Press the Engine Start/Stop button to
the ON or START position. 2. Press the EPB switch while depressing
the brake pedal. Make sure the Parking Brake warning light goes off.
Satisfy the following conditions 1. Ensure seat belts are fastened and the
doors, hood and liftgate are closed. 2. With the engine running, depress the
brake pedal and shift out of P (Park) to R (Reverse), D (Drive) or Manual shift mode.
3. Depress the accelerator pedal. Make sure the Parking Brake warning light goes off.
Information For your safety, you can engage EPB
even though the Engine Stop/Start button is in the OFF position (only if battery power is available), but you cannot release it.
For your safety, depress the brake pedal and release the parking brake manually with the EPB switch when you drive downhill or when backing up the vehicle.
NOTICE If the Parking Brake warning light
is still on even though the EPB has been released, we recommend that you have the system checked by an authorized HYUNDAI dealer.
Do not drive your vehicle with EPB applied. It may cause excessive brake pad and brake rotor wear.
06
6-37
Warning messages
OJX1069030L
To release EPB, close the doors, hood and liftgate and fasten the seatbelt If you try to drive with EPB applied, a
warning will sound and a message will appear.
If the driver's seat belt is unfastened and the engine hood or liftgate is opened, a warning will sound and a message will appear.
If there is a problem with the vehicle, a warning may sound and a message may appear.
If the situation occurs, depress the brake pedal and release EPB by pressing the EPB switch.
WARNING Whenever leaving the vehicle or
parking, always come to a complete stop and continue to depress the brake pedal. Shift the gear into P (Park), pull up the EPB switch, and press the Engine Start/Stop button to the OFF position. Take the Key with you when leaving the vehicle. Vehicles not fully engaged in P (Park) with the parking brake set are at risk for moving inadvertently and causing injury to yourself or others.
NEVER allow anyone who is unfamiliar with the vehicle to touch the EPB switch. If EPB is released unintentionally, serious injury may occur.
Only release EPB when you are seated inside the vehicle with your foot firmly on the brake pedal.
NOTICE Do not apply the accelerator pedal
while the parking brake is engaged. If you depress the accelerator pedal with EPB engaged, a warning will sound and a message will appear. Damage to the parking brake may occur.
Driving with the parking brake on can overheat the braking system and cause premature wear or damage to brake parts. Make sure EPB is released and the Parking Brake warning light is off before driving.
Information A clicking sound may be heard while
operating or releasing the EPB. These conditions are normal and indicate that EPB is functioning properly.
When leaving your keys with a parking attendant or assistant, make sure to inform him/her how to operate EPB.
Driving your vehicle
6-38
OIK057079L
AUTO HOLD deactivating. Press brake pedal When the conversion from Auto Hold to EPB is not working properly a warning will sound and a message will appear.
OJX1069028L OJX1069066L
Parking brake automatically engaged / Parking brake automatically applied When EPB is applied while Auto Hold is activated, a warning will sound and a message will appear.
EPB malfunction Electronic Parking Brake (EPB) warning light illuminates if the Engine Start/Stop button is pressed to the ON position and goes off in approximately 3 seconds if the system is operating normally. If the EPB warning light remains on, comes on while driving, or does not come on when the Engine Start/Stop button is pressed to the ON position, this indicates that the EPB may have malfunctioned. If this occurs, we recommend that you have the system checked by an authorized HYUNDAI dealer. The EPB warning light may illuminate when the ESC indicator comes on to indicate that ESC is not working properly, but it does not indicate a malfunction of EPB.
NOTICE If the EPB warning light is still on,
we recommend that you have the system checked by an authorized HYUNDAI dealer.
If the Parking Brake warning light does not illuminate or blinks even though the EPB switch was pulled up, EPB may not be applied.
If the Parking Brake warning light blinks when the EPB warning light is on, press the switch, and then pull it up. Repeat this one more time. If the EPB warning does not go off, we recommend that you have the system checked by an authorized HYUNDAI dealer.
06
6-39
Parking brake warning light Check the Parking Brake warning light by pressing the Engine Stop/Start button to the ON position.
This light will be illuminated when the parking brake is applied with the Engine Stop/Start button in the START or ON position. Before driving, be sure the parking brake is released and the Parking Brake warning light is OFF. If the Parking Brake warning light remains on after the parking brake is released while the engine is running, there may be a malfunction in the brake system. Immediate attention is necessary. If at all possible, cease driving the vehicle immediately. If that is not possible, use extreme caution while operating the vehicle and only continue to drive the vehicle until you can reach a safe location.
When the EPB (Electronic Parking Brake) does not release If the EPB does not release normally, we recommend that you contact an authorized HYUNDAI dealer by loading the vehicle on a flatbed tow truck and have the system checked.
Auto Hold (if equipped) Auto Hold maintains the vehicle in a standstill even though the brake pedal is not depressed after the driver brings the vehicle to a complete stop by depressing the brake pedal.
To apply:
OTM060010
1. With the drivers door, engine hood and liftgate (vehicle equipped with shift button) closed, then press the AUTO HOLD switch. The white AUTO HOLD indicator will come on and the system will be in the standby position.
Driving your vehicle
6-40
OTM060057L
2. When you stop the vehicle completely by depressing the brake pedal, Auto Hold maintains the brake pressure to hold the vehicle stationary. The indicator changes from white to green.
3. The vehicle will remain stationary even if you release the brake pedal.
4. If EPB is applied, Auto Hold will be released.
To release: If you depress the accelerator pedal
with the gear in D(Drive) or Manual shift mode or R(vehicle equipped with shift button), the Auto Hold will be released automatically and the vehicle will start to move. The AUTO HOLD indicator changes from green to white.
If the vehicle is restarted using the cruise control toggle switch (RES+ or SET-) while Auto Hold and cruise control is operating, Auto Hold will be released regardless of accelerator pedal operation. The AUTO HOLD indicator changes from green to white.
WARNING When Auto Hold is automatically released by depressing the accelerator pedal, always take a look around your vehicle. Slowly depress the accelerator pedal for a smooth start.
To cancel:
OTM060012
1. Depress and hold the brake pedal. 2. Press the AUTO HOLD switch. The AUTO HOLD indicator will turn off.
WARNING To prevent, unexpected and sudden vehicle movement, ALWAYS press your foot on the brake pedal to cancel the Auto Hold before you: - Drive downhill. - Drive the vehicle in R (Reverse).
(vehicle equipped with shift button) - Park the vehicle.
06
6-41
Information The Auto Hold does not operate when:
- The driver's door is opened - The engine hood is opened - The liftgate is opened (vehicle
equipped with shift button) - The gear is in P (Park) - EPB is applied
For your safety, the Auto Hold automatically switches to EPB when: - The driver's door is opened - The engine hood is opened - The vehicle is in a standstill for more
than 10 minutes - The vehicle is standing on a steep
slope - The vehicle moved several times - The liftgate is opened
In these cases, the Parking Brake warning light comes on, the AUTO HOLD indicator changes from green to white, and a warning sound and a message will appear to inform you that EPB has been automatically engaged. Before driving off again, depress the brake pedal, check the surrounding area near your vehicle and release the parking brake manually with the EPB switch.
While operating Auto Hold, you may hear mechanical noise. However, it is normal operating noise.
NOTICE If the AUTO HOLD indicator changes to yellow, Auto Hold is not working properly. We recommend that you contact an authorized HYUNDAI dealer.
WARNING Depress the accelerator pedal slowly
when you start the vehicle. For your safety, cancel Auto Hold
when you drive downhill, back up the vehicle or park the vehicle.
NOTICE If there is a malfunction with the driver's door or engine hood open detection system, Auto Hold may not work properly. We recommend that you contact an authorized HYUNDAI dealer.
Warning messages Type A Type B
OJX1069028L OJX1069066L
Parking brake automatically engaged / Parking brake automatically applied When EPB is applied while Auto Hold is activated, a warning will sound and a message will appear.
Driving your vehicle
6-42
OOSH069024L
Deactivating AUTO HOLD... Press brake pedal When the conversion from Auto Hold to EPB is not working properly a warning will sound and a message will appear. When this message is displayed, Auto Hold and EPB may not operate. For your safety, depress the brake pedal.
OJX1069035L
Press brake pedal to deactivate AUTO HOLD If you did not apply the brake pedal when you release Auto Hold by pressing the AUTO HOLD switch, a warning will sound and a message will appear.
OTM060049L
AUTO HOLD conditions not met. Close door, hood and liftgate. When you press the AUTO HOLD switch, if the driver's door and engine hood are not closed, a warning will sound and a message will appear on the cluster LCD display. Press the AUTO HOLD switch after closing the driver's door and hood.
06
6-43
Anti-lock Brake System (ABS)
WARNING Anti-Lock Braking System (ABS) or Electronic Stability Control (ESC) system will not prevent accidents due to improper or dangerous driving maneuvers. Even though vehicle control is improved during emergency braking, always maintain a safe distance between you and objects ahead of you. Vehicle speeds should always be reduced during extreme road conditions. The braking distance for vehicles equipped with ABS or ESC may be longer than for those without these systems in the following road conditions. Drive your vehicle at reduced speeds during the following conditions: Rough, gravel or snow-covered
roads. On roads where the road surface is
pitted or has different surface height. Tire chains are installed on your
vehicle. The safety features of ABS or ESC equipped vehicle should not be tested by high speed driving or cornering. This could endanger the safety of yourself or others.
ABS is an electronic braking system that helps prevent a braking skid. ABS allows the driver to steer and brake at the same time.
Using ABS To obtain the maximum benefit from your ABS in an emergency situation, do not attempt to modulate your brake pressure and do not try to pump your brakes. Depress your brake pedal as hard as possible. When you apply your brakes under conditions which may lock the wheels, you may hear sounds from the brakes, or feel a corresponding sensation in the brake pedal. This is normal and it means your ABS is active. ABS does not reduce the time or distance it takes to stop the vehicle. Always maintain a safe distance from the vehicle in front of you. ABS will not prevent a skid that results from sudden changes in direction, such as trying to take a corner too fast or making a sudden lane change. Always drive at a safe speed for the road and weather conditions. ABS cannot prevent a loss of stability. Always steer moderately when braking hard. Severe or sharp steering wheel movement can still cause your vehicle to veer into oncoming traffic or off the road. On loose or uneven road surfaces, operation of the anti-lock brake system may result in a longer stopping distance than for vehicles equipped with a conventional brake system. The ABS ( ) warning light will stay on for several seconds after the Engine Start/Stop button is in the ON position.
Driving your vehicle
6-44
During that time, ABS will go through self-diagnosis and the light will go off if everything is normal. If the light stays on, you may have a problem with your ABS. We recommend that you contact an authorized HYUNDAI dealer as soon as possible.
WARNING If the ABS ( ) warning light is on and stays on, you may have a problem with the ABS. Your power brakes will work normally. To reduce the risk of serious injury or death, contact your authorized HYUNDAI dealer as soon as possible.
NOTICE When you drive on a road having poor traction, such as an icy road, and apply your brakes continuously, ABS will be active continuously and the ABS ( ) warning light may illuminate. Pull your vehicle over to a safe place and turn the vehicle off. Restart the vehicle. If the ABS warning light is off, then your ABS system is normal. Otherwise, you may have a problem with your ABS system. We recommend that you contact an authorized HYUNDAI dealer as soon as possible.
Information When you jump start your vehicle because of a drained battery, the ABS ( ) warning light may turn on at the same time. This happens because of the low battery voltage. It does not mean your ABS is malfunctioning. Have the battery recharged before driving the vehicle.
Electronic Stability Control (ESC)
OTM060013
Electronic Stability Control helps to stabilize the vehicle during cornering maneuvers. ESC checks where you are steering and where the vehicle is actually going. ESC applies braking pressure to any one of the vehicle's brakes and intervenes in the engine management system to assist the driver with keeping the vehicle on the intended path. It is not a substitute for safe driving practices. Always adjust your speed and driving to the road conditions.
WARNING Never drive too fast for the road conditions when cornering. ESC will not prevent accidents. Excessive speed in turns, abrupt maneuvers, and hydroplaning on wet surfaces can result in severe accidents.
06
6-45
ESC operation ESC ON condition When the Engine Start/Stop button is in the ON position, ESC and the ESC OFF indicator lights illuminate for approximately three seconds. After both lights go off, ESC is enabled.
When operating When ESC is in operation, the ESC indicator light blinks:
When you apply your brakes under conditions which may lock the wheels, you may hear sounds from the brakes, or feel a corresponding sensation in the brake pedal. This is normal and it means your ESC is active.
When ESC activates, the engine may not respond to the accelerator as it does under routine conditions.
If Cruise Control was in use when ESC activates, Cruise Control automatically disengages. Cruise Control can be reengaged when the road conditions allow. See Cruise Control System section in chapter 7 (if equipped).
When moving out of the mud or driving on a slippery road, the engine rpm (revolutions per minute) may not increase even if you press the accelerator pedal deeply. This is to maintain the stability and traction of the vehicle and does not indicate a problem.
ESC OFF condition To cancel ESC operation:
State 1 Press the ESC OFF button briefly. The ESC OFF indicator light and/or message 'Traction Control disabled' will illuminate. In this state, the traction control function of ESC (engine management) is disabled, but the brake control function of ESC (braking management) still operates.
State 2 Press and hold the ESC OFF button continuously for more than 3 seconds. The ESC OFF indicator light and/or message 'Traction & Stability Control disabled' illuminates and a warning chime sounds. In this state, both the traction control function of ESC (engine management) and the brake control function of ESC (braking management) are disabled. If the Engine Start/Stop button is pressed to the OFF position when ESC is off, ESC remains off. Upon restarting the vehicle, ESC will automatically turn on again.
Driving your vehicle
6-46
Indicator lights ESC indicator light (blinks)
ESC OFF indicator light (comes on)
When the Engine Start/Stop button is pressed to the ON position, the ESC indicator light illuminates, then goes off if the ESC system is operating normally. The ESC indicator light blinks whenever ESC is operating. If the ESC indicator light stays on, your vehicle may have a malfunction with the ESC system. When this warning light illuminates we recommend that the vehicle be checked by an authorized HYUNDAI dealer as soon as possible. The ESC OFF indicator light comes on when ESC is turned off.
WARNING When ESC is blinking, this indicates ESC is active: Drive slowly and NEVER attempt to accelerate. NEVER turn ESC off while the ESC indicator light is blinking or you may lose control of the vehicle resulting in an accident.
NOTICE Driving with wheels and tires with different sizes may cause the ESC system to malfunction. Before replacing tires, make sure all four tires and wheels are the same size. Never drive the vehicle with different sized wheels and tires installed.
ESC OFF usage When Driving The ESC OFF mode should only be used briefly to help free the vehicle if stuck in snow or mud, by temporarily stopping operation of ESC, to maintain wheel torque. To turn ESC off while driving, press the ESC OFF button while driving on a flat road surface.
NOTICE To prevent damage to the transmission: Do not allow wheel(s) of one axle to
spin excessively while the ESC, ABS, and Parking Brake warning lights are displayed. The repairs would not be covered by the vehicle warranty. Reduce engine power and do not spin the wheel(s) excessively while these lights are displayed.
When operating the vehicle on a dynamometer, make sure ESC is turned off (ESC OFF light illuminated).
Information Turning ESC off does not affect ABS or standard brake system operation.
06
6-47
Vehicle Stability Management (VSM) Vehicle Stability Management is a function of the Electronic Stability Control (ESC) system. It helps the vehicle stay stable when accelerating or braking suddenly on wet, slippery and rough roads where traction over the four tires can suddenly become uneven.
WARNING Take the following precautions when using Vehicle Stability Management: ALWAYS check the speed and the
distance to the vehicle ahead. VSM is not a substitute for safe driving practices.
Never drive too fast for the road conditions. VSM will not prevent accidents. Excessive speed in bad weather, on slippery and uneven roads can result in severe accidents.
VSM operation When operating When you apply your brakes under conditions which may activate ESC, you may hear sounds from the brakes, or feel a corresponding sensation in the brake pedal. This is normal and it means your VSM is active.
Information VSM does not operate when: Driving on a banked road such as
gradient or incline. Driving in reverse. The ESC OFF indicator light is on. The EPS (Electric power steering)
warning light ( ) is on or blinks.
VSM OFF condition To cancel VSM operation, press the ESC OFF button. ESC OFF ( ) indicator light will illuminate. To turn on VSM, press the ESC OFF button again. The ESC OFF indicator light will go out.
WARNING If the ESC ( ) indicator light or EPS ( ) warning light stays illuminated or blinks, your vehicle may have a malfunction with the VSM system. When the warning light illuminates we recommend that the vehicle be checked by an authorized HYUNDAI dealer as soon as possible.
NOTICE Driving with wheels and tires with different sizes may cause the VSM system to malfunction. Before replacing tires, make sure all four tires and wheels are the same size. Never drive the vehicle with different sized tires and wheels installed.
Driving your vehicle
6-48
Hill-Start Assist Control (HAC) Hill-Start Assist Control helps prevent the vehicle from rolling backwards when starting a vehicle from a stop on a hill. The system operates the brakes automatically for approximately 2 seconds and releases the brake after 5 seconds or when the accelerator pedal is depressed.
WARNING Always be ready to depress the accelerator pedal when starting off an incline. Hill-Start Assist Control activates only for approximately 2 seconds.
Information Hill-Start Assist Control does not
operate when the gear is shifted to P (Park) or N (Neutral).
Hill-Start Assist Control activates even when the ESC (Electronic Stability Control) is off. However, it does not activate, when ESC does not operate normally.
Downhill Brake Control (DBC)
OTM060014
Downhill Brake Control assists the driver to descend down a steep hill without having to depress the brake pedal. The system automatically applies the brakes to maintain vehicle speed below a certain speed and allows the driver to concentrate on steering the vehicle down hill. The system is turned off whenever the engine is turned off. Press the button to turn on the system and press the button again to turn it off.
06
6-49
System operation
Mode Indicator Description
Standby
Green light on
Press the Downhill Brake Control button when vehicle speed is under 37 mph (60 km/h). Downhill Brake Control will turn on and enter the standby mode. The system does not turn on if vehicle speed is over 37 mph (60 km/h).
Activated
Green light blink
In the standby mode, Downhill Brake Control will activate under the following conditions: The hill is steep enough. The brake pedal or accelerator pedal is not depressed. Vehicle speed is within 2~25 mph (4~40 km/h) range
(within 1.5~5 mph (2.5~8 km/h) when reversing). Within the activation speed range 2~25 mph (4~40 km/h), the driver can control the vehicle speed by depressing the brake pedal or accelerator pedal.
Deactivated Green light off
Downhill Brake Control will turn off under the following conditions: The Downhill Brake Control button is pressed again. Vehicle speed is over 37 mph (60 km/h).
Green light on
Downhill Brake Control will be deactivated but maintain the standby mode under the following conditions: The hill is not steep enough. Vehicle speed is between 25~37 mph (40~60 km/h).
System malfunction
Yellow light on
The yellow warning light illuminates when the system may have malfunctioned or may not work properly during activation. If this occurs, Downhill Brake Control is deactivated. We recommend that the system be inspected by an authorized HYUNDAI dealer as soon as possible.
Driving your vehicle
6-50
OJX1069039L
Downhill Brake Control disabled. Control vehicle speed (manually) When Downhill Brake Control is not working properly this warning message will appear on the cluster LCD display and you will hear a warning sound. If this occurs, control vehicle speed by depressing the brake pedal.
WARNING Always turn off Downhill Brake Control on normal roads. The system might activate inadvertently from the standby mode when driving through speed bumps or making sharp curves.
Information Downhill Brake Control may not
deactivate on steep inclines even though the brake pedal or accelerator pedal is depressed.
Downhill Brake Control may not always maintain vehicle speed at a certain speed.
Downhill Brake Control does not operate when: - The gear is in P (Park). - ESC is activated.
Noise or vibration may occur from the brakes when Downhill Brake Control is activated.
The rear stop light comes on when Downhill Brake Control is activated.
06
6-51
Good braking practices
WARNING Whenever leaving the vehicle or parking, always come to a complete stop and continue to depress the brake pedal. Shift the gear to the P (Park) position, then apply the parking brake, and press the Engine Start/Stop button to the OFF position. Vehicles parked with the parking brake not applied or not fully engaged may roll inadvertently and may cause injury to the driver and others. ALWAYS apply the parking brake before exiting the vehicle.
Wet brakes can be dangerous! The brakes may get wet if the vehicle is driven through standing water or if it is washed. Your vehicle will not stop as quickly if the brakes are wet. Wet brakes may cause the vehicle to pull to one side. To dry the brakes, apply the brakes lightly until the braking action returns to normal. If the braking action does not return to normal, stop as soon as it is safe to do so and we recommend that you call an authorized HYUNDAI dealer for assistance. DO NOT drive with your foot resting on the brake pedal. Even light, but constant pedal pressure can result in the brakes overheating, brake wear, and possibly even brake failure. If a tire goes flat while you are driving, apply the brakes gently and keep the vehicle pointed straight ahead while you slow down. When you are moving slowly enough for it to be safe to do so, pull off the road and stop in a safe location. Keep your foot firmly on the brake pedal when the vehicle is stopped to prevent the vehicle from rolling forward.
Driving your vehicle
6-52
Four Wheel Drive (4WD) delivers engine power to front and rear wheels for maximum traction. 4WD is useful when extra traction is required, such as when driving on, muddy, wet, or snow-covered roads.
WARNING To reduce the risk of SERIOUS INJURY or DEATH: Do not drive in conditions that
exceed the vehicles intended design such as challenging off-road conditions.
Avoid high speeds when cornering or turning.
Do not make quick steering wheel movements, such as sharp lane changes or fast, sharp turns.
The risk of a rollover is greatly increased if you lose control of your vehicle at highway speeds.
Loss of control often occurs if two or more wheels drop off the roadway and the driver over steers to reenter the roadway.
In the event your vehicle leaves the roadway, do not steer sharply. Instead, slow down before pulling back into the travel lanes.
NOTICE Do not drive in water if the level
is higher than the bottom of the vehicle.
Check your brake condition once you are out of mud or water. Depress the brake pedal several times as you move slowly until you feel normal braking return.
Shorten your scheduled maintenance interval if you drive in off-road conditions such as sand, mud or water (see "Maintenance Under Severe Usage Conditions" section in chapter 9).
Always wash your vehicle thoroughly after off road use, especially the bottom of the vehicle.
Be sure to equip the vehicle with four tires of the same size and type.
Make sure that a full time 4WD vehicle is towed by a flat bed tow truck.
FOUR WhEEL DRIVE (4WD) (IF EQUIppED)
06
6-53
Four Wheel Drive (4WD) operation Four Wheel Drive (4WD) mode selection
Transfer mode
Selection button
Indicator light Description
4WD AUTO (4WD LOCK is deactivated) (not
illuminated)
In the 4WD AUTO mode, under normal operating conditions, onventional 2WD vehicles. If the system determines there is a need for four wheel drive, the engines driving power is distributed to all four wheels automatically. Use this mode when driving on normal roads. If you select the "Driving force distribution" in the cluster, Driving force distribution (4WD) state is displayed.
4WD LOCK
(illuminated)
In the 4WD LOCK mode, the system is deactivated when vehicle speed is over 37 mph (60 km/h) and the mode is shifted to 4WD AUTO mode. If the vehicle speed slows down to 37 mph (60 km/h), the mode shifts back to the 4WD LOCK mode. If 4WD Lock is activated, the driving force distribution in the cluster is not displayed. Use this mode when driving up or down steep inclines, driving off-road, driving on sandy and muddy roads, etc. to maximize traction
WARNING If 4WD warning light ( ) stays on the instrument cluster, your vehicle may have a malfunction with the 4WD system. When the 4WD warning light ( ) illuminates we recommend that the vehicle be checked by an authorized HYUNDAI dealer as soon as possible.
Driving your vehicle
6-54
CAUTION When driving on normal roads, deactivate the 4WD LOCK mode by pushing the 4WD LOCK button (4WD LOCK indicator light goes off). Driving on normal roads with the 4WD LOCK mode, especially, when cornering may cause mechanical noise or vibration. The noise and vibration will disappear when the 4WD LOCK mode is deactivated. Prolonged driving with the noise and vibration may damage some parts of the power train.
NOTICE When the 4WD LOCK mode is
deactivated, a sensation may be felt as the driving power is delivered entirely to the front wheels.
Auto Four Wheel Drive mode (normal driving) (if equipped) If the 4WD system determines there is a need for four wheel drive, the engine's driving power is distributed to all four wheels automatically.
06
6-55
Selected mode Description
Auto 4WD (Normal driving) -
Use this mode when driving on normal roads. Under normal operating conditions, the vehicle
operates similar to conventional 2WD vehicles. If the system determines there is a need for four wheel drive, the engine's driving power is distributed to all four wheels automatically.
SNOW
Use this mode when driving on slippery roads. The engines driving power is properly distributed to
the wheels, to help start the vehicle stably on slippery roads or keep tires from slipping.
Be sure to maintain Auto 4WD mode when driving on normal roads. If you drive with the 4WD Lock mode on normal roads or curved roads, it may damage 4WD parts and cause vibration and noise. However, vibration and noise are normal conditions that will disappear when Auto 4WD mode is selected. Also, when the vehicle is changed from 4WD Lock to Auto 4WD, a sensation may be felt as driving power is delivered to the rear wheels.
Four Wheel Drive (4WD) selection (if equipped)
OTMA060012
Driving your vehicle
6-56
For safe 4WD operation Before driving Make sure all passengers are wearing
seat belts. Sit upright and closer to the steering
wheel than usual. Adjust the steering wheel to a position comfortable for you to drive.
Driving on snow-covered or icy roads Start off slowly by applying the
accelerator pedal gently. Use snow tires or tire chains. Keep sufficient distance between your
vehicle and the vehicle in front of you. Apply engine braking during
deceleration by using the paddle shifter (manual shift mode) and manually selecting a lower gear.
Avoid speeding, rapid acceleration, sudden brake applications, and sharp turns to prevent skids.
Information When using Snow Tires, mount them on all four wheels. If a full set of chains is not available for an 4WD vehicle when using tire chains, chains may be installed on the front wheels only. For more details on Snow Tires and Tire Chains, refer to "Winter Driving" section later in this chapter.
CAUTION Mud or snow If one of the front or rear wheels begins to spin in mud, snow, etc. the vehicle can sometimes be driven out by engaging the accelerator pedal further; however avoid running the engine continuously at high rpm because doing so could damage the AWD system.
Driving in sand or mud Maintain slow and constant speed.
Operate the accelerator pedal slowly to ensure safe driving (wheel-slip prevention).
Keep sufficient distance between your vehicle and the vehicle in front of you.
Reduce vehicle speed and always check the road condition.
Avoid speeding, rapid acceleration, sudden brake applications, and sharp turns to prevent getting stuck.
When the vehicle is stuck in snow, sand or mud, the tires may not operate.
This is to protect the transmission and not a malfunction.
NOTICE Moving the vehicle forcibly to get out of mud or sand can cause damage/ overheat of the engine or damage/ breakdown of the transmission, differential or 4WD system as well as damage to tires. If excessive wheel slip occurs after entering a sandy/muddy road, the vehicle may fall into the sand/ mud. When it happens, put a stone or a tree branch under the tire, and then try to pull out the vehicle, or try to get it unstuck by repeatedly moving forwards and backwards.
06
6-57
OTMA060009
OTMA060010
Transmission overheated When driving on muddy and sandy
roads under the severe condition, the transmission could be overheated.
When the transmission is overheated, the safe protection mode engages and the Transmission Hot! Park with engine on: warning message will appear on the LCD display with a chime.
If this occurs, pull over to a safe location, stop the vehicle with the engine running, apply the brakes and shift the vehicle to P (Park), and allow the transmission to cool.
If you ignore this warning, the driving condition may become worse. You may experience abrupt shifts, frequent shifts, or jerkiness. To return to the normal driving condition, stop the vehicle and apply the foot brake or shift into P (Park). Then allow the transmission to cool for a few minutes with engine on, before driving off.
When the message Trans cooled. Resume driving appears you can continue to drive your vehicle.
If the warning messages in the LCD display continue to blink, for your safety, have the system checked by a professional workshop. We recommends to visit an authorized HYUNDAI dealer.
Driving up or down hills Driving uphill
- Before starting off, check if it is possible to drive uphill.
- Drive as straight as possible. Driving downhill
- Do not change gear while driving downhill. Select gear before driving downhill.
- Drive slowly using engine braking while driving downhill.
- Drive straight as possible.
WARNING Exercise extreme caution driving up or down steep hills. The vehicle may flip over depending on the grade, terrain, water and mud conditions.
WARNING Do not drive across the contour of steep hills. A slight change in the wheel angle can destabilize the vehicle, or a stable vehicle may lose stability if the vehicle stops its forward motion. Your vehicle may roll over and lead to a serious injury or death.
Driving your vehicle
6-58
Driving through water Try to avoid driving in deep standing
water. It may stall your engine and clog your exhaust pipes.
Do not change gear while driving in water.
CAUTION Always drive slowly in water. If you drive too fast, water may get into the engine compartment and wet the ignition system causing your vehicle to suddenly stop.
Additional driving conditions Become familiar with the off-road
conditions before driving. Always pay attention when driving off-
road and avoid dangerous areas. Drive slowly when driving in heavy
wind. Reduce vehicle speed when
cornering. The center of gravity of 4WD vehicles is higher than conventional 2WD vehicles, making them more likely to roll over when you rapidly turn corners.
Always hold the steering wheel firmly when you are driving off-road.
WARNING Do hold the steering wheel tightly when you are driving off-road. You may hurt your arm by a sudden steering maneuver or from steering wheel rebound due to an impact with objects on the ground. You could lose control of the steering wheel which may lead to serious injury or death.
Emergency precautions Tires When replacing tires, be sure to equip all four tires with the same size, type, tread patterns, brand and load-carrying capacity.
WARNING Do not use tire and wheel with different size and type from the one originally installed on your vehicle. It can affect the safety and performance of your vehicle, which could lead to steering failure or rollover causing serious injury.
In an emergency situation, a compact spare tire (if equipped) or Tire Mobility Kit (if equipped) may be used. But, do not use the compact spare tire continuously. Repair or replace the original tire as soon as possible to avoid failure of the differential or 4WD system.
WARNING Never start or run the engine while an 4WD vehicle is raised on a jack. The vehicle can slip or roll off of a jack causing serious injury or death to you or those nearby.
06
6-59
Towing 4WD vehicles must be towed with a wheel lift and dollies or flatbed equipment with all the wheels off the ground. For more details, refer to "Towing" section in chapter 8.
Vehicle inspection If the vehicle needs to be operated on
a vehicle lift do not attempt to stop any of the four wheels from turning. This could damage the 4WD system.
Never engage the parking brake while running the engine on a car lift. This may damage the 4WD system.
Dynamometer testing An 4WD vehicle must be tested on a special four wheel chassis dynamometer.
OTM060016L
[A] : Roll tester (Speedometer), [B] : Temporary free roller
An 4WD vehicle should not be tested on a 2WD roll tester. If a 2WD roll tester must be used, perform the following procedure: 1. Check the tire pressures
recommended for your vehicle. 2. Place the rear wheels on the roll tester
for a speedometer test as shown in the illustration.
3. Release the parking brake. 4. Place the front wheels on the
temporary free roller as shown in the illustration.
WARNING Keep away from the front of the vehicle while the vehicle is in gear on the dynamometer. The vehicle can jump forward and cause serious injury or death.
Reducing the risk of a rollover Your multi-purpose passenger vehicle is defined as a Sports Utility Vehicle (SUV). SUVs have higher ground clearance and a narrower track to make them capable of performing in a wide variety of off-road applications. The specific design characteristics give them a higher center of gravity than ordinary vehicles making them more likely to roll over if you make abrupt turns. Utility vehicles have a significantly higher rollover rate than other types of vehicles. Due to this risk, driver and passengers are strongly recommended to buckle their seat belts. In a rollover crash, an unbelted person is significantly more likely to die than a person wearing a seat belt. There are steps that a driver can make to reduce the risk of a rollover. If at all possible, avoid sharp turns or abrupt maneuvers, do not load your roof rack with heavy cargo, and never modify your vehicle in any way.
Driving your vehicle
6-60
WARNING Rollover As with other Sports Utility Vehicle (SUV), failure to operate this vehicle correctly may result in loss of control, an accident or vehicle rollover. Utility vehicles have a significantly
higher rollover rate than other types of vehicles.
Specific design characteristics (higher ground clearance, narrower track, etc.) give this vehicle a higher center of gravity than ordinary vehicles.
A SUV is not designed for cornering at the same speeds as conventional vehicles.
Avoid sharp turns or abrupt maneuvers.
In a rollover crash, an unbelted person is significantly more likely to die than a person wearing a seat belt. Make sure everyone in the vehicle is properly buckled up.
WARNING Your vehicle is equipped with tires designed to provide safe ride and handling capability. Do not use a size and type of tire and wheel that is different from the one that is originally installed on your vehicle. It can affect the safety and performance of your vehicle, which could lead to steering failure or rollover and serious injury. When replacing the tires, be sure to equip all four tires with the tire and wheel of the same size, type, tread, brand and load-carrying capacity. If you nevertheless decide to equip your vehicle with any tire/wheel combination not recommended by HYUNDAI for off road driving, you should not use these tires for highway driving.
WARNING Jacked vehicle While a full-time 4WD vehicle is being raised on a jack, never start the engine or cause the tires to rotate. There is a danger that rotating tires touching the ground could cause the vehicle to fall off the jack and to jump forward or rearward.
06
6-61
IDLE sTOp AnD gO (Isg) (IF EQUIppED) Idle Stop and Go helps reduce fuel consumption by automatically shutting down the engine, when the vehicle is at a standstill (i.e. red stop light, stop sign, and traffic jam) subject to certain prerequisite conditions being satisfied as listed below. The engine is automatically started upon satisfying the starting conditions. ISG system is always active, when the engine is running.
Information When the engine is automatically started by ISG system, warning lights (i.e. ABS, ESC, ESC OFF, EPS, and parking brake warning light) may illuminate for a few seconds due to low battery voltage. However, it does not indicate a malfunction with ISG system.
ISG system operation Prerequisite for activation ISG system operates in the following situations. The driver's seatbelt is fastened The driver's door and hood are closed The brake vacuum pressure is
adequate The battery sensor is activated and
the battery is sufficiently charged Outside temperature is not too low or
too high The vehicle is driven over a constant
speed and stops The climate control system satisfies
the conditions The vehicle is sufficiently warmed up ISG related parts are working properly The incline is gradual The steering wheel is turned less than
180 degrees and then the vehicle stops
Information If the ISG light (white) is turned on on the instrument cluster and does not meet the ISG system operating conditions, the ISG system is not activated. When the ISG light (yellow) is on while the ISG system meets operating conditions, we recommend that the system be inspected by an authorized HYUNDAI dealer.
Driving your vehicle
6-62
Auto stop When ISG is on the engine will be stopped automatically when both of the following occurs: 1. Vehicle speed decreases to 0 mph (0
km/h) full stop condition. 2. Brake pedal is depressed and gear is
in D (Drive) or N (Neutral). The Auto Stop ( ) indicator illuminates in green on the instrument cluster, when the engine stops.
Information Idle stop cannot reoccur again until the vehicle speed goes above 3 mph (5 km/h) and then returns again to the automatic stop conditions as previously mentioned.
In the Auto Stop mode, if the engine hood is opened, ISG system will be deactivated.
OTM060017
When the system is deactivated, the ISG off button indicator will illuminate and a message Auto Stop is off. Shift to P or N to start engine manually appears on the cluster LCD display with a warning sound. If this occurs, depress the brake pedal and restart the engine manually.
Auto start When the engine stops automatically by ISG, the engine will restart if one of the following is done. - Release the brake pedal. - When Auto Hold is activated, take
your foot off the brake pedal and then depress the accelerator pedal.
- While depressing the brake pedal, shift the gear from N (Neutral) or D (Drive) to R (Reverse) or P (Park).
- While depressing the brake pedal, shift the gear from N (Neutral) to D (Drive).
The Auto Stop ( ) indicator goes to white on the instrument cluster, when the engine is restarted.
06
6-63
LCD display messages The messages are displayed on the instrument cluster to help use ISG system.
OJX1069042L
Auto Stop is Off. Shift to P or N to start engine When the system is deactivated, the ISG off button indicator will illuminate and a message will appear on the cluster LCD display with a warning sound in the following situations. - When the engine hood is opened. - When ISG system is not working
normally. If this occurs, depress the brake pedal and restart the engine manually. For your safety, restart the vehicle in the P (Park) position.
Type A Type B
OJX1069071L OJX1069070L
Press brake pedal before driving on / Press brake pedal for Auto Start When the gear is shifted from N (Neutral) to R (Reverse), D (Drive) or Manual shift mode without the brake pedal depressed, a message will appear on the cluster LCD display. To activate auto start, depress the brake pedal.
OJX1069044
AUTO STOP elapsed time AUTO STOP display shows the elapsed time of engine stop by the Idle Stop and Go system. You may check AUTO STOP elapsed time in the Utility view on the instrument cluster. Refer to View Modes section in chapter 4.
Driving your vehicle
6-64
ISG system off
OTM060017
Press the ISG OFF button to turn off ISG system. The ISG OFF button indicator will illuminate. To use the system, press the ISG OFF button again.
Forced to restart engine The engine is automatically restarted in the following situations. The brake vacuum pressure is low The engine has stopped for about 5
minutes The air conditioning is ON with the fan
speed set to a certain high level The front defroster is ON The battery is weak The cooling and heating performance
of the climate control system is unsatisfactory
The vehicle is shifted to P (Park) or R (Reverse) when Auto Hold is activated
The door is opened or the seatbelt is unfastened when Auto Hold is activated
The EPB switch is pressed when Auto Hold is activated
The Auto Stop ( ) indicator blinks in green for 5 seconds on the instrument cluster when the engine is restarted.
WARNING When the engine is in Idle Stop mode, the engine may restart without the driver taking any action. Before leaving the vehicle or working on the engine compartment, turn off the engine by pressing the ENGINE START/STOP button to the OFF position.
06
6-65
ISG malfunction ISG system may not operate when there is a malfunction with the ISG sensors or ISG system. The following will occur, when there is a malfunction with the ISG system: The Auto Stop ( ) indicator will
illuminate in yellow on the instrument cluster.
The light on the ISG OFF button will illuminate.
We recommend that you contact an authorized HYUNDAI dealer.
NOTICE
OTMA060001
[A] : Battery sensor
If the AGM battery is reconnected or replaced, ISG system will not operate immediately. If you want to use the system, the battery sensor needs to be calibrated for approximately 4 hours with the engine off. After calibration, turn the engine on and off 2 or 3 times.
Driving your vehicle
6-66
OTM060058L
Drive mode may be selected according to the driver's preference or road condition.
Drive mode The mode changes whenever the DRIVE MODE knob is rotated.
COMFORT mode COMFORT mode provides smooth driving and comfortable riding.
SPORT mode SPORT mode provides sporty but firm riding. In SPORT mode, the fuel efficiency may decrease.
When SPORT mode is selected, the SPORT indicator will illuminate on the instrument cluster.
Whenever the engine is restarted, the drive mode will revert back to COMFORT mode. If SPORT mode is desired, re-select SPORT mode.
When SPORT mode is activated: - The engine rpm will tend to remain
raised over a certain length of time even after releasing the accelerator
- Upshifts are delayed when accelerating
DRIVE mODE InTEgRATED COnTROL sYsTEm (2WD) (IF EQUIppED)
06
6-67
SMART mode SMART mode selects the proper driving mode among ECO, COMFORT and SPORT by judging the driver's driving habits (i.e. mild or dynamic) from the brake pedal depression or the steering wheel operation.
Press the DRIVE MODE button to activate SMART mode. When SMART mode is activated, the indicator illuminates on the instrument cluster.
The vehicle starts in SMART mode, when the engine was turned OFF in SMART mode.
SMART mode automatically controls gear shifting patterns, engine torque, in accordance with the driver's driving habits.
Information When you mildly drive the vehicle
in SMART mode, the driving mode changes to ECO mode to improve fuel efficiency. However, the actual fuel efficiency may differ in accordance with your driving situations (i.e. upward/downward slope, vehicle deceleration/acceleration).
When you dynamically drive the vehicle in SMART mode by abruptly decelerating or sharply curving, the driving mode changes to SPORT mode. However, it may adversely affect fuel economy.
Various driving situations, which you may encounter in SMART mode The driving mode automatically
changes to ECO mode after a certain period of time, when you gently depress the accelerator pedal (Your driving is categorized to be mild.).
The driving mode automatically changes from SMART ECO mode to SMART COMFORT mode after a certain period of time, when you sharply or repetitively depress the accelerator pedal.
The driving mode automatically changes to SMART COMFORT mode with the same driving patterns, when the vehicle starts to drive on an upward slope of a certain angle. The driving mode automatically returns to SMART ECO mode, when the vehicle enters a leveled road.
The driving mode automatically changes to SMART SPORT, when you abruptly accelerate the vehicle or repetitively operate the steering wheel (Your driving is categorized to be sporty.). In this mode, your vehicle drives in a lower gear for abrupt accelerating/decelerating and increases the engine brake performance.
You may still sense the engine brake performance, even when you release the accelerator pedal in SMART SPORT mode. It is because your vehicle remains to be in a lower gear over a certain period of time for next acceleration. Thus, it is a normal driving situation, not indicating any malfunction.
Driving your vehicle
6-68
The driving mode automatically changes to SMART SPORT mode only in harsh driving situations. In most of the normal driving situations, the driving mode sets to be either in SMART ECO mode or in SMART COMFORT mode.
Limitation of SMART mode The SMART mode may be limited in following situations. (The OFF indicator illuminates in those situations.) The driver manually moves the shift
lever : It deactivates SMART mode. The vehicle drives, as the driver manually moves the shift lever.
The cruise control is activated : The cruise system may deactivate the SMART mode. When a higher system is set by the cruise system, it starts to control vehicle speed and deactivates SMART mode. (SMART mode is not deactivated just by activing the cruise system.)
The transmission oil temperature is either extremely low or extremely high : The SMART mode can be active in most of the normal driving situations. However, an extremely high/ low transmission oil temperature may temporarily deactivate the SMART mode, because the transmission condition is out of normal operation condition.
06
6-69
Drive mode
OTMA060012
Drive mode may be selected according to the driver's preference or road condition. The mode changes whenever the DRIVE knob is rotated.
COMFORT mode COMFORT mode provides smooth driving and comfortable riding.
SPORT mode SPORT mode provides sporty but firm riding. In SPORT mode, the fuel efficiency may decrease.
When SPORT mode is selected, the SPORT indicator will illuminate on the instrument cluster.
Whenever the engine is restarted, the drive mode will revert back to COMFORT mode. If SPORT mode is desired, re-select SPORT mode.
When SPORT mode is activated: - The engine rpm will tend to remain
raised over a certain length of time even after releasing the accelerator
- Upshifts are delayed when accelerating
DRIVE mODE InTEgRATED COnTROL sYsTEm (4WD) (IF EQUIppED)
Driving your vehicle
6-70
SMART mode SMART mode selects the proper driving mode among ECO, COMFORT and SPORT by judging the driver's driving habits (i.e. mild or dynamic) from the brake pedal depression or the steering wheel operation.
Press the DRIVE MODE button to activate SMART mode. When SMART mode is activated, the indicator illuminates on the instrument cluster.
The vehicle starts in SMART mode, when the engine was turned OFF in SMART mode.
SMART mode automatically controls gear shifting patterns, engine torque, in accordance with the driver's driving habits.
Information When you mildly drive the vehicle
in SMART mode, the driving mode changes to ECO mode to improve fuel efficiency. However, the actual fuel efficiency may differ in accordance with your driving situations (i.e. upward/downward slope, vehicle deceleration/acceleration).
When you dynamically drive the vehicle in SMART mode by abruptly decelerating or sharply curving, the driving mode changes to SPORT mode. However, it may adversely affect fuel economy.
Various driving situations, which you may encounter in SMART mode The driving mode automatically
changes to ECO mode after a certain period of time, when you gently depress the accelerator pedal (Your driving is categorized to be mild.).
The driving mode automatically changes from SMART ECO mode to SMART COMFORT mode after a certain period of time, when you sharply or repetitively depress the accelerator pedal.
The driving mode automatically changes to SMART COMFORT mode with the same driving patterns, when the vehicle starts to drive on an upward slope of a certain angle. The driving mode automatically returns to SMART ECO mode, when the vehicle enters a leveled road.
The driving mode automatically changes to SMART SPORT, when you abruptly accelerate the vehicle or repetitively operate the steering wheel (Your driving is categorized to be sporty.). In this mode, your vehicle drives in a lower gear for abrupt accelerating/decelerating and increases the engine brake performance.
You may still sense the engine brake performance, even when you release the accelerator pedal in SMART SPORT mode. It is because your vehicle remains to be in a lower gear over a certain period of time for next acceleration. Thus, it is a normal driving situation, not indicating any malfunction.
The driving mode automatically changes to SMART SPORT mode only in harsh driving situations. In most of the normal driving situations, the driving mode sets to be either in SMART ECO mode or in SMART COMFORT mode.
06
6-71
Limitation of SMART mode The SMART mode may be limited in following situations. (The OFF indicator illuminates in those situations.) The driver manually moves the shift
lever : It deactivates SMART mode. The vehicle drives, as the driver manually moves the shift lever.
The cruise control is activated : The cruise system may deactivate the SMART mode. When a higher system is set by the cruise system, it starts to control vehicle speed and deactivates SMART mode. (SMART mode is not deactivated just by activing the cruise system.)
The transmission oil temperature is either extremely low or extremely high : The SMART mode can be active in most of the normal driving situations. However, an extremely high/ low transmission oil temperature may temporarily deactivate the SMART mode, because the transmission condition is out of normal operation condition.
Driving your vehicle
6-72
SPECIAL DRIVING CONDITIONS Hazardous driving conditions When hazardous driving elements are encountered such as water, snow, ice, mud and sand, take the following precautions: Drive cautiously and maintain a longer
braking distance. Avoid abrupt braking or steering. When your vehicle is stuck in
snow, mud, or sand, use second gear. Accelerate slowly to avoid unnecessary wheel spin.
Put sand, rock salt, tire chains or other non-slip materials under the wheels to provide additional traction while the vehicle becomes stuck in ice, snow, or mud.
WARNING Downshifting with an automatic transmission while driving on slippery surfaces can cause an accident. The sudden change in tire speed could cause the tires to skid. Be careful when downshifting on slippery surfaces.
Rocking the vehicle If it is necessary to rock the vehicle to free it from snow, sand, or mud, first turn the steering wheel right and left to clear the area around your front wheels. Then, shift back and forth between R (Reverse) and a forward gear. Try to avoid spinning the wheels, and do not race the engine. To prevent transmission wear, wait until the wheels stop spinning before shifting gears. Release the accelerator pedal while shifting, and press lightly on the accelerator pedal while the transmission is in gear. Slowly spinning the wheels in forward and reverse directions causes a rocking motion that may free the vehicle.
WARNING If the vehicle is stuck and excessive wheel spin occurs, the temperature in the tires can increase very quickly. If the tires become damaged, a tire blow out or tire explosion can occur. This condition is dangerous - you and others may be injured. Do not attempt this procedure if people or objects are anywhere near the vehicle. If you attempt to free the vehicle, the vehicle can overheat quickly, possibly causing an engine compartment fire or other damage. Try to avoid spinning the wheels as much as possible to prevent overheating of either the tires or the engine. DO NOT allow the vehicle to spin the wheels above 35 mph (56 km/h).
Information The ESC system must be turned OFF before rocking the vehicle.
06
6-73
NOTICE If you are still stuck after rocking the vehicle a few times, have the vehicle pulled out by a tow vehicle to avoid engine overheating, possible damage to the transmission, and tire damage. See Towing section in chapter 8.
Smooth cornering Avoid braking or gear changing in corners, especially when roads are wet. Ideally, corners should always be taken under gentle acceleration.
Driving at night Night driving presents more hazards than driving in the daylight. Here are some important tips to remember: Slow down and keep more distance
between you and other vehicles, as it may be more difficult to see at night, especially in areas where there may not be any street lights.
Adjust your mirrors to reduce the glare from other drivers headlamps.
Keep your headlamps clean and properly aimed. Dirty or improperly aimed headlamps will make it much more difficult to see at night.
Avoid staring directly at the headlamps of oncoming vehicles. You could be temporarily blinded, and it will take several seconds for your eyes to readjust to the darkness.
Driving in the rain Rain and wet roads can make driving dangerous. Here are a few things to consider when driving in the rain or on slick pavement: Slow down and allow extra following
distance. A heavy rainfall makes it harder to see and increases the distance needed to stop your vehicle.
Turn OFF your Cruise Control. (if equipped)
Replace your windshield wiper blades when they show signs of streaking or missing areas on the windshield.
Be sure your tires have enough tread. If your tires do not have enough tread, making a quick stop on wet pavement can cause a skid and possibly lead to an accident. See Tire Tread section in chapter 9.
Turn on your headlamps to make it easier for others to see you.
Driving too fast through large puddles can affect your brakes. If you must go through puddles, try to drive through them slowly.
If you believe your brakes may be wet, apply them lightly while driving until normal braking operation returns.
Hydroplaning If the road is wet enough and you are going fast enough, your vehicle may have little or no contact with the road surface and actually ride on the water. The best advice is SLOW DOWN when the road is wet.
The risk of hydroplaning increases as the depth of tire tread decreases, refer to Tire Tread section in chapter 9.
Driving your vehicle
6-74
Driving in flooded areas Avoid driving through flooded areas unless you are sure the water is no higher than the bottom of the wheel hub. Drive through any water slowly. Allow adequate stopping distance because brake performance may be reduced. After driving through water, dry the brakes by gently applying them several times while the vehicle is moving slowly.
Highway driving Tires Adjust the tire inflation, as specified. Under-inflation may overheat or damage the tires. Do not install worn-out or damaged tires, which may reduce traction or fail the braking operation.
Information Never over-inflate your tires above the maximum inflation pressure, as specified on your tires.
Fuel, engine coolant and engine oil Driving at higher speeds on the highway consumes more fuel and is less efficient than driving at a slower, more moderate speed. Maintain a moderate speed in order to conserve fuel when driving on the highway. Be sure to check both the engine coolant level and the engine oil before driving.
Drive belt A loose or damaged drive belt may overheat the engine.
Reducing the risk of a rollover Your multi-purpose passenger vehicle is defined as a Sports Utility Vehicle (SUV). SUVs have higher ground clearance and a narrower track to make them capable of performing in a wide variety of off-road applications. The specific design characteristics give them a higher center of gravity than ordinary vehicles making them more likely to roll over if you make abrupt turns. Utility vehicles have a significantly higher rollover rate than other types of vehicles. Due to this risk, driver and passengers are strongly recommended to buckle their seat belts. In a rollover crash, an unbelted person is significantly more likely to die than a person wearing a seat belt. There are steps that a driver can make to reduce the risk of a rollover. If at all possible, avoid sharp turns or abrupt maneuvers, do not load your vehicle with heavy cargo on the roof, and never modify your vehicle in any way.
WARNING Utility vehicles have a significantly higher rollover rate than other types of vehicles. To prevent rollovers or loss of control: Take corners at slower speeds than
you would with a passenger vehicle. Avoid sharp turns and abrupt
maneuvers. Do not modify your vehicle in any
way that you would raise the center of gravity.
Keep tires properly inflated. Do not carry heavy cargo on the roof.
WARNING In a rollover crash, an unbelted person is significantly more likely to die than a person wearing a seat belt. Make sure all passengers are wearing their seat belts.
06
6-75
The severe weather conditions of winter quickly wear out tires and cause other problems. To minimize winter driving problems, you should take the following suggestions:
Snow or icy conditions You need to keep sufficient distance between your vehicle and the vehicle in front of you. Apply the brakes gently. Speeding, rapid acceleration, sudden brake applications, and sharp turns are potentially very hazardous practices. During deceleration, use engine braking to the fullest extent. Sudden brake applications on snowy or icy roads may cause the vehicle to skid. To drive your vehicle in deep snow, it may be necessary to use snow tires or to install tire chains on your tires. Always carry emergency equipment. Some of the items you may want to carry include tire chains, tow straps or chains, a flashlight, emergency flares, sand, a shovel, jumper cables, a window scraper, gloves, ground cloth, coveralls, a blanket, etc.
Snow tires
WARNING Snow tires should be equivalent in size and type to the vehicles standard tires. Otherwise, the safety and handling of your vehicle may be adversely affected.
We recommend that you use snow tires when road temperature is below 45F (7C). Refer to the below chart, and mount the recommended snow tire for your vehicle. If you mount snow tires on your vehicle, make sure to use the same Inflation pressure as the original tires. Mount snow tires on all four wheels to balance your vehicles handling in all weather conditions. The traction provided by snow tires on dry roads may not be as high as your vehicles original equipment tires. Check with the tire dealer for maximum speed recommendations.
WINTER DRIVING
Driving your vehicle
6-76
Tire chains Type A
OTM060025
Type B
OTM060045
Since the sidewalls of radial tires are thinner than other types of tires, they may be damaged by mounting some types of tire chains on them. Therefore, the use of snow tires is recommended instead of tire chains. If tire chains must be used, use genuine HYUNDAI Parts and install the tire chain after reviewing the instructions provided with the tire chains. Damage to your vehicle caused by improper tire chain use is not covered by your vehicle manufacturers warranty. Fabric-type chains must be used on the vehicle with 19/20 tires.
When using tire chains, attach them to the drive wheels as follows. 2WD : Front wheels 4WD : All four wheels
If a full set of chains is not available for an 4WD vehicle, chains may be installed on the front wheels only.
WARNING The use of tire chains may adversely affect vehicle handling: Drive less than 20 mph (30 km/h)
or the chain manufacturers recommended speed limit, whichever is lower.
Drive carefully and avoid bumps, holes, sharp turns, and other road hazards, which may cause the vehicle to bounce.
Avoid sharp turns or locked wheel braking.
Information Install tire chains only in pairs and on
the front tires. It should be noted that installing tire chains on the tires will provide a greater driving force, but will not prevent side skids.
Do not install studded tires without first checking local and municipal regulations for possible restrictions against their use.
06
6-77
Chain Installation When installing tire chains, follow the manufacturers instructions and mount them as tightly possible. Drive slowly (less than 20 mph (30 km/h)) with chains installed. If you hear the chains contacting the body or chassis, stop and tighten them. If they still make contact, slow down until the noise stops. Remove the tire chains as soon as you begin driving on cleared roads. When mounting snow chains, park the vehicle on level ground away from traffic. Turn on the vehicle Hazard Warning Flasher and place a triangular emergency warning device behind the vehicle (if available). Always place the vehicle in P (Park), apply the parking brake and turn off the engine before installing snow chains.
NOTICE When using tire chains: Wrong size chains or improperly
installed chains can damage your vehicles brake lines, suspension, body and wheels.
Use SAE S class or wire chains. If you hear noise caused by chains
contacting the body, retighten the chain to prevent contact with the vehicle body.
To prevent body damage, retighten the chains after driving 0.3~0.6 miles (0.5~1.0 km).
Do not use tire chains on vehicles equipped with aluminum wheels. If unavoidable, use a wire type chain.
Use wire chains less than 0.47 in. (12mm) thick to prevent damage to the chains connection.
Winter precautions Use high quality ethylene glycol coolant Your vehicle is delivered with high quality ethylene glycol coolant in the cooling system. It is the only type of coolant that should be used because it helps prevent corrosion in the cooling system, lubricates the water pump and prevents freezing. Be sure to replace or replenish your coolant in accordance with the maintenance schedule in chapter 9. Before winter, have your coolant tested to assure that its freezing point is sufficient for the temperatures anticipated during the winter.
Check battery and cables Winter temperatures affect battery performance. Inspect the battery and cables, as specified in chapter 9. The battery charging level can be checked by an authorized HYUNDAI dealer or in a service station.
Change to winter weight oil if necessary In some regions during winter, it is recommended to use the winter weight oil with lower viscosity In addition, replace the engine oil and filter if it is close to the next maintenance interval. Fresh engine oil ensures optimum engine operation during the winter months. For further information, refer to chapter 2. When you are not sure about a type of winter weight oil, we recommend that you consult an authorized HYUNDAI dealer.
Driving your vehicle
6-78
Check spark plugs and ignition system Inspect the spark plugs, as specified in chapter 8. If necessary, replace them. Also check all ignition wirings and components for any cracks, wear-out, and damage.
To prevent locks from freezing To prevent the locks from being frozen, spray approved de-icing fluid or glycerin into key holes. When a lock opening is already covered with ice, spray approved de-icing fluid over the ice to remove it. When an internal part of a lock freezes, try to thaw it with a heated key. Carefully use the heated key to avoid an injury.
Use approved window washer anti- freeze solution in system To prevent the window washer from being frozen, add authorized window washer anti-freeze solution, as specified on the window washer container. Window washer anti-freeze solution is available from an authorized HYUNDAI dealer, and most vehicle accessory outlets. Do not use engine coolant or other types of anti-freeze solution, to prevent any damage to the vehicle paint.
Do not let your parking brake freeze Under some conditions your parking brake can freeze in the engaged position. This is most likely to happen when there is an accumulation of snow or ice around or near the rear brakes or if the brakes are wet. When there is the risk that your parking brake may freeze, temporarily apply it with the gear in P (Park). Also, block the rear wheels in advance, so the vehicle may not roll. Then, release the parking brake.
Do not let ice and snow accumulate underneath Under some conditions, snow and ice can build up under the fenders and interfere with the steering. When driving in such conditions during the severe winter, you should check underneath the vehicle on a regular basis, to ensure that the front wheels and the steering components is unblocked.
Carry emergency equipment In accordance with weather conditions, you should carry appropriate emergency equipment, while driving. Some of the items you may want to carry include tire chains, tow straps or chains, flashlight, emergency flares, sand, shovel, jumper cables, window scraper, gloves, ground cloth, coveralls, blanket, etc.
Do not place objects or materials in the engine compartment Putting objects or materials in the engine compartment may cause an engine failure or combustion, because they may block the engine cooling. Such damage will not be covered by the manufacturers warranty.
06
6-79
If you are considering to tow with your vehicle, you should first know your countrys legal requirements. As laws vary the requirements for towing trailers, cars, or other types of vehicles or apparatus may differ. When you are not sure about a type of winter weight oil, we recommend that you consult an authorized HYUNDAI dealer. Remember that trailering is different than just driving your vehicle by itself. Trailering means changes in handling, durability, and fuel economy. Successful, safe trailering requires correct equipment, and it has to be used properly. Damage to your vehicle caused by improper trailer towing is not covered by your vehicle manufacturers warranty. This section contains time-tested, important trailering tips and safety rules. Many of these are important for your safety and that of your passengers. Please read this section carefully before you pull a trailer.
WARNING Take the following precautions: If you dont use the correct
equipment and/or drive improperly, you can lose control of the vehicle when you are pulling a trailer. For example, if the trailer is too heavy, the braking performance may be reduced. You and your passengers could be seriously or fatally injured. Pull a trailer only if you have followed all the steps in this section.
Before towing, make sure the total trailer weight, GCW (Gross Combination Weight), GVW (Gross Vehicle Weight), GAW (Gross Axle Weight) and trailer tongue load are all within the limits.
When you tow a trailer, make sure to turn off the Idle Stop and Go system.
TRAILER TOWING
Driving your vehicle
6-80
If you decide to pull a trailer? Here are some important points if you decide to pull a trailer: Consider using a sway control. You
can ask a trailer hitch dealer about sway control.
Do not do any towing with your vehicle during its first 1,200 miles (2,000 km) in order to allow the engine to properly break in. Failure to heed this caution may result in serious engine or transmission damage.
When towing a trailer, we recommend that you consult an authorized HYUNDAI dealer for further information on additional requirements such as a towing kit, etc.
Always drive your vehicle at a moderate speed (less than 60 mph (100 km/h)) or posted towing speed limit.
On a long uphill grade, do not exceed 45 mph (70 km/h) or the posted towing speed limit, whichever is lower.
Carefully observe the weight and load limits provided in the following pages.
Trailer weight
Tongue Load Total Trailer Weight
OOSH069129L
What is the maximum safe weight of a trailer? It should never weigh more than the maximum trailer weight with trailer brakes. But even that can be too heavy. It depends on how you plan to use your trailer. For example, speed, altitude, road grades, outside temperature and how often your vehicle is used to pull a trailer are all important. The ideal trailer weight can also depend on any special equipment that you have on your vehicle.
06
6-81
Tongue load
Gross Axle Weight Gross Vehicle Weight
OOSH069130L
The tongue load is an important weight to measure because it affects the total Gross Vehicle Weight (GVW) of your vehicle. The trailer tongue should weigh a maximum of 10% of the total loaded trailer weight, within the limits of the maximum trailer tongue load permissible. After youve loaded your trailer, weigh the trailer and then the tongue, separately, to see if the weights are proper. If they arent, you may be able to correct them simply by moving some items around in the trailer.
WARNING Take the following precautions: Never load a trailer with more weight
in the rear than in the front. The front should be loaded with approximately 60% of the total trailer load; the rear should be loaded with approximately 40% of the total trailer load.
Never exceed the maximum weight limits of the trailer or trailer towing equipment. Improper loading can result in damage to your vehicle and/ or personal injury. Check weights and loading at a commercial scale or highway patrol office equipped with scales.
Information With increasing altitude the engine performance decreases. From 1,000 m above sea level and for every 1,000 m thereafter 10% of vehicle/trailer weight (trailer weighter + gross vehicle weight) must be deducted.
Driving your vehicle
6-82
Reference weight and distance when towing a trailer
Item Smartstream
G2.5 GDI Smartstream
G2.5 TGDI A/T DCT
Maximum trailer weight
lbs. (kg)
Without brake system 1,653 (750) 1,653 (750)
With brake system (PKG OPT) 2,000 (907) 2,000 (907)
With brake system (STD) 2,800 (1,270) 3,500 (1,588)
Maximum permissible static vertical load on the coupling device
lbs. (kg) 280 (127) 350 (159)
Recommended distance from rear wheel center to coupling point
inch (mm) 49.1 (1,248)
06
6-83
Trailer towing equipment Hitches
OTM060050L
Information The mounting hole for hitches are located on both sides of the underbody behind the rear tires.
Its important to have the correct hitch equipment. Crosswinds, large trucks going by, and rough roads are a few reasons why youll need the right hitch. Here are some rules to follow: Do you have to make any holes in
the body of your vehicle when you install a trailer hitch? If you do, then be sure to seal the holes later when you remove the hitch. If you dont seal them, carbon monoxide (CO) from your exhaust can get into your vehicle, as well as dirt and water.
The bumpers on your vehicle are not intended for hitches. Do not attach rental hitches or other bumper-type hitches to them. Use only a frame- mounted hitch that does not attach to the bumper.
Any part of the rear number plate or lighting devices of the vehicle must not be obscured by the mechanical coupling device. If the rear number plate and/or lighting devices can be obscured partially by any part of the mechanical coupling device, mechanical coupling devices that can not be easily removed or repositioned without use of any tools, except an easily operated (i.e. an effort not exceeding 20Nm) release key which is supplied by the manufacturer of the coupling device, are not permitted for use. Please note that the mechanical coupling device that is fitted and not in use must always be removed or repositioned if the rear number plate and/or rear lighting devices are obscured by any part of the mechanical coupling device.
A HYUNDAI trailer hitch accessory is available at an authorized HYUNDAI dealer.
Driving your vehicle
6-84
Safety chains You should always attach chains between your vehicle and your trailer. Instructions about safety chains may be provided by the hitch manufacturer or trailer manufacturer. Follow the manufacturers recommendation for attaching safety chains. Always leave just enough slack so you can turn with your trailer. And, never allow safety chains to drag on the ground.
Trailer brakes If your trailer is equipped with a braking system, make sure it conforms to your countrys regulations and that it is properly installed and operating correctly. If your trailer weighs more than the maximum trailer weight without trailer brakes loaded, then it needs its own brakes and they must be adequate. Be sure to read and follow the instructions for the trailer brakes so youll be able to install, adjust and maintain them properly. Be sure not to modify your vehicles brake system.
WARNING Do not use a trailer with its own brakes unless you are absolutely certain that you have properly set up the brake system. This is not a task for amateurs. Use an experienced, competent trailer shop for this work.
Driving with a trailer Towing a trailer requires a certain amount of experience. Before setting out for the open road, you must get to know your trailer. Acquaint yourself with the feel of handling and braking with the added weight of the trailer. And always keep in mind that the vehicle you are driving is now longer and not nearly as responsive as your vehicle is by itself. Before you start, check the trailer hitch and platform, safety chains, electrical connector(s), lights, tires and brakes. During your trip, occasionally check to be sure that the load is secure, and that the lights and trailer brakes are still working.
Distance Stay at least twice as far behind the vehicle ahead as you would when driving your vehicle without a trailer. This can help you avoid situations that require heavy braking and sudden turns.
Passing You will need more passing distance up ahead when youre towing a trailer. And, because of the increased vehicle length, youll need to go much farther beyond the passed vehicle before you can return to your lane.
06
6-85
Backing up Hold the bottom of the steering wheel with one hand. Then, to move the trailer to the left, move your hand to the left. To move the trailer to the right, move your hand to the right. Always back up slowly and, if possible, have someone guide you.
Making turns When youre turning with a trailer, make wider turns than normal. Do this so your trailer wont strike soft shoulders, curbs, road signs, trees, or other objects. Avoid jerky or sudden maneuvers. Signal well in advance.
Turn signals When you tow a trailer, your vehicle has to have a different turn signal flasher and extra wiring. The green arrows on your instrument panel will flash whenever you signal a turn or lane change. Properly connected, the trailer lights will also flash to alert other drivers youre about to turn, change lanes, or stop. When towing a trailer, the green arrows on your instrument panel will flash for turns even if the bulbs on the trailer are burned out. Thus, you may think drivers behind you are seeing your signals when, in fact, they are not. Its important to check occasionally to be sure the trailer bulbs are still working. You must also check the lights every time you disconnect and then reconnect the wires.
WARNING Do not connect a trailer lighting system directly to your vehicles lighting system. Use an approved trailer wiring harness. Failure to do so could result in damage to the vehicle electrical system and/or personal injury. We recommend that you consult an authorized HYUNDAI dealer for assistance.
Driving on hills Reduce speed and shift to a lower gear before you start down a long or steep downgrade. If you dont shift down, you might have to use your brakes so much that they would get overheated and may not operate efficiently. On a long uphill grade, shift down and reduce your speed to around 45 mph (70 km/h) to reduce the possibility of engine and transmission overheating. If your trailer weighs more than the maximum trailer weight without trailer brakes and you have a automatic transmission, you should drive in D (Drive) when towing a trailer. Operating your vehicle in D (Drive) when towing a trailer will minimize heat build-up and extend the life of your transmission.
Driving your vehicle
6-86
NOTICE To prevent engine and/or transmission overheating: When towing a trailer on steep
grades (in excess of 6%) pay close attention to the engine coolant temperature gauge to ensure the engine does not overheat. If the needle of the coolant temperature gauge moves towards H (HOT), pull over and stop as soon as it is safe to do so, and allow the engine to idle until it cools down. You may proceed once the engine has cooled sufficiently.
If you tow a trailer with the maximum gross vehicle weight and maximum trailer weight, it can cause the engine or transmission to overheat. When driving in such conditions, allow the engine to idle until it cools down. You may proceed once the engine or transmission has cooled sufficiently.
When towing a trailer, your vehicle speed may be much slower than the general flow of traffic, especially when climbing an uphill grade. Use the right hand lane when towing a trailer on an uphill grade. Choose your vehicle speed according to the maximum posted speed limit for vehicles with trailers, the steepness of the grade, and your trailer weight.
Parking on hills Generally, if you have a trailer attached to your vehicle, you should not park your vehicle on a hill.
However, if you ever have to park your trailer on a hill, heres how to do it: 1. Pull the vehicle into the parking space.
Turn the steering wheel in the direction of the curb (right if headed down hill, left if headed up hill).
2. Shift the gear to P (Park). 3. Set the parking brake and shut off the
vehicle. 4. Place wheel chocks under the trailer
wheels on the down hill side of the wheels.
5. Start the vehicle, hold the brakes, shift to neutral, release the parking brake and slowly release the brakes until the trailer chocks absorb the load.
6. Reapply the brakes and parking brakes.
7. Shift the gear to P (Park) when the vehicle is parked on a uphill grade and in R (Reverse) on a downhill.
8. Shut off the vehicle and release the vehicle brakes but leave the parking brake set.
WARNING To prevent serious or fatal injury: Do not get out of the vehicle without
the parking brake firmly set. If you have left the engine running, the vehicle can move suddenly. You and others could be seriously or fatally injured.
Do not apply the accelerator pedal to hold the vehicle on an uphill.
06
6-87
Driving the vehicle after it has been parked on a hill 1. With the gear in P (Park), apply your
brakes and hold the brake pedal down while you: Start your engine; Shift into gear; and Release the parking brake.
2. Slowly remove your foot from the brake pedal.
3. Drive slowly until the trailer is clear of the chocks.
4. Stop and have someone pick up and store the chocks.
Maintenance when towing a trailer Your vehicle will need service more often when you regularly pull a trailer. Important items to pay particular attention to include engine oil, transmission fluid, axle lubricant and cooling system fluid. Brake condition is another important item to frequently check. If youre trailering, its a good idea to review these items before you start your trip. Dont forget to also maintain your trailer and hitch. Follow the maintenance schedule that accompanied your trailer and check it periodically. Preferably, conduct the check at the start of each days driving. Most importantly, all hitch nuts and bolts should be tight.
NOTICE To prevent vehicle damage: Due to higher load during trailer
usage, overheating might occur on hot days or during uphill driving. If the coolant gauge indicates over-heating, switch off the air conditioner and stop the vehicle in a safe area to cool down the engine.
Do not switch off the engine while the coolant gauge indicates over- heating. (Keep the engine idle to cool down the engine)
When towing check transmission fluid more frequently.
If your vehicle is not equipped with an air conditioner, you should install a condenser fan to improve engine performance when towing a trailer.
Driving your vehicle
6-88
Two labels on your drivers door sill show how much weight your vehicle was designed to carry: the Tire and Loading Information Label and the Certification Label. Before loading your vehicle, familiarize yourself with the following terms for determining your vehicles weight ratings, from the vehicles specifications and the Certification Label:
Base Curb Weight This is the weight of the vehicle including a full tank of fuel and all standard equipment. It does not include passengers, cargo, or optional equipment.
Vehicle Curb Weight This is the weight of your new vehicle when you picked it up from your dealer plus any aftermarket equipment.
Cargo Weight This figure includes all weight added to the Base Curb Weight, including cargo and optional equipment.
GAW (Gross Axle Weight) This is the total weight placed on each axle (front and rear) - including vehicle curb weight and all payload.
GAWR (Gross Axle Weight Rating) This is the maximum allowable weight that can be carried by a single axle (front or rear). These numbers are shown on the Certification Label. The total load on each axle must never exceed its GAWR.
GVW (Gross Vehicle Weight) This is the Base Curb Weight plus actual Cargo Weight plus passengers.
GVWR (Gross Vehicle Weight Rating) This is the maximum allowable weight of the fully loaded vehicle (including all options, equipment, passengers and cargo). The GVWR is shown on the Certification Label located on the drivers door sill.
VEHICLE LOAD LIMIT
06
6-89
The Loading Information Label 18 inch Type A
OTMA060002
Type B
OTMA060003
19 inch Type A
OTMA060004
Type B
OTMA060005
Driving your vehicle
6-90
20 inch Type A
OTMA060006
Type B
OTMA060007
The label located on the drivers door sill gives the original tire size, cold tire pressures recommended for your vehicle, the number of people that can be in your vehicle and vehicle capacity weight.
Vehicle capacity weight 5 persons : 903 lbs. (410 kg) Vehicle capacity weight is the maximum combined weight of occupants and cargo. If your vehicle is equipped with a trailer, the combined weight includes the tongue load.
Seating capacity Total : 5 persons (Front seat : 2 persons, Rear seat : 3 persons) Seating capacity is the maximum number of occupants including a driver, your vehicle may carry. However, the seating capacity may be reduced based upon the weight of all of the occupants, and the weight of the cargo being carried or towed. Do not overload the vehicle as there is a limit to the total weight, or load limit including occupants and cargo, the vehicle can carry.
Towing capacity With brake system (PKG OPT) : 2,000 lbs (907 kg) With brake system (STD) : 2,800 lbs (1,270 kg) (GDI) / 3,500 lbs (1,588 kg) (T-GDI) Towing capacity is the maximum trailer weight including its cargo weight, your vehicle can tow.
Cargo capacity The cargo capacity of your vehicle will increase or decrease depending on the weight and the number of occupants and the tongue load, if your vehicle is equipped with a trailer.
06
6-91
Steps for determining correct load limit 1. Locate the statement "The combined
weight of occupants and cargo should never exceed XXX kg or XXX lbs." on your vehicle's placard.
2. Determine the combined weight of the driver and passengers that will be riding in your vehicle.
3. Subtract the combined weight of the driver and passengers from XXX kg or XXX lbs.
4. The resulting figure equals the available amount of cargo and luggage load capacity. For example, if the "XXX" amount equals 1400 lbs. and there will be five 150 lb passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs. (1400 - 750 (5 x 150) = 650 lbs.)
5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4.
6. If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle.
WARNING Do not overload the vehicle as there is a limit to the total weight, or load limit, including occupants and cargo, the vehicle can carry. Overloading can shorten the life of the vehicle. If the GVWR or the GAWR is exceeded, parts on the vehicle can break, and it can change the handling of your vehicle. These could cause you to lose control and result in an accident.
Driving your vehicle
6-92
Example 1
+
Maximum Load (1400 lbs.)
(635 kg)
Passenger Weight (150 lbs. 2 = 300 lbs.)
(68 kg 2 = 136 kg)
Cargo Weight (1100 lbs.) (499 kg)
Example 2
+
Maximum Load (1400 lbs.)
(635 kg)
Passenger Weight (150 lbs. 5 = 750 lbs.)
(68 kg 5 = 340 kg)
Cargo Weight (650 lbs.) (295 kg)
Example 3
+
Maximum Load (1400 lbs.)
(635 kg)
Passenger Weight (172 lbs. 5 = 860 lbs.)
(78 kg 5 = 390 kg)
Cargo Weight (540 lbs.) (245 kg)
06
6-93
Certification label
OBH059070
The certification label is located on the driver's door sill at the center pillar and shows the maximum allowable weight of the fully loaded vehicle. This is called the GVWR (Gross Vehicle Weight Rating). The GVWR includes the weight of the vehicle, all occupants, fuel and cargo. This label also tells you the maximum weight that can be supported by the front and rear axles, called Gross Axle Weight Rating (GAWR). The total weight of the vehicle, including all occupants, accessories, cargo, and trailer tongue load must not exceed the Gross Vehicle Weight Rating (GVWR) or the Gross Axle Weight Rating (GAWR). To find out the actual loads on your front and rear axles, you need to go to a weigh station and weigh your vehicle. Be sure to spread out your load equally on both sides of the centerline.
WARNING Overloading Never exceed the GVWR for your
vehicle, the GAWR for either the front or rear axle and vehicle capacity weight. Exceeding these ratings can affect your vehicle's handling and braking ability, and cause an accident.
Do not overload your vehicle. Overloading your vehicle can cause heat buildup in your vehicle's tires and possible tire failure, increased stopping distances and poor vehicle handling-all of which may result in a crash.
NOTICE Overloading your vehicle may cause damage. Repairs would not be covered by your warranty. Do not overload your vehicle.
WARNING If you carry items inside your vehicle (e.g., suitcases, tools, packages, or anything else), they are moving as fast as the vehicle. If you have to stop or turn quickly, or if there is a crash, the items will keep going and can cause an injury if they strike the driver or a passenger. Put items in the cargo area of your
vehicle. Try to spread the weight evenly.
Do not stack items, like suitcases, inside the vehicle above the tops of the seats.
Do not leave an unsecured child restraint in your vehicle.
When you carry something inside the vehicle, secure it.
7
Driving Safety Forward CollisionAvoidance Assist (FCA) (Sensor fusion) .................................... 7-2 Lane Keeping Assist (LKA) .......................................................................................7-18 Blind-Spot Collision-Avoidance Assist (BCA) ........................................................ 7-25 Safe Exit Assist (SEA) (if equipped)......................................................................... 7-39 Driver Attention Warning (DAW) ............................................................................7-45 Blind-Spot View Monitor (BVM) ..............................................................................7-51
Driving Convenience Smart Cruise Control (SCC) .................................................................................... 7-53 Navigation-based Smart Cruise Control (NSCC) .................................................. 7-70 Lane Following Assist (LFA) .....................................................................................7-77 Highway Driving Assist (HDA) .................................................................................7-81
Parking Safety Rear View Monitor (RVM) .......................................................................................7-88 Surround View Monitor (SVM) ...............................................................................7-92 Rear Cross-Traffic Collision-Avoidance Assist (RCCA) ......................................... 7-97 Reverse Parking Distance Warning (PDW) .......................................................... 7-108 Forward/Reverse Parking Distance Warning (PDW) ............................................. 7-111 Reverse Parking Collision-Avoidance Assist (PCA) ...............................................7-115 Remote Smart Parking Assist (RSPA) ....................................................................7-123 Declaration of conformity .....................................................................................7-136
7. Driver assistance system
Driver assistance system
Driver assistance system
7-2
FORWARD COLLIsIOnAVOIDAnCE AssIsT (FCA) (sEnsOR FUsIOn) Basic function
OJX1070255L
Forward Collision-Avoidance Assist is designed to help detect and monitor the vehicle ahead or help detect a pedestrian or cyclist in the roadway and warn the driver that a collision is imminent with a warning message and an audible warning, and if necessary, apply emergency braking.
Junction Turning function (if equipped)
OJX1070257L
Junction Turning function will help avoid a collision with an oncoming vehicle in an adjacent lane when turning left at a crossroad with the turn signal on by applying emergency braking.
Detecting sensor
OTM070001
OTM070022
[1] : Front view camera, [2] : Front radar
Refer to the picture above for the detailed location of the detecting sensors.
07
7-3
CAUTION Take the following precautions to maintain optimal performance of the detecting sensor: Never disassemble the detecting
sensor or sensor assembly, or apply any impact on it.
If the detecting sensors have been replaced or repaired, we recommend that you have your vehicle inspected by an authorized HYUNDAI dealer.
Never install any accessories or stickers on the front windshield, or tint the front windshield.
Pay extreme caution to keep the front view camera dry.
Never place any reflective objects (i.e. white paper, mirror) over the dashboard. Any light reflection may prevent the system from functioning properly.
Do not apply license plate frame or objects, such as a bumper sticker, film or a bumper guard, near the front radar cover.
Always keep the front radar and cover clean and free of dirt and debris. Use only a soft cloth to wash the vehicle. Do not spray pressurized water directly on the sensor or sensor cover.
If unnecessary force has been applied to the radar or around the radar, Forward Collision-Avoidance Assist may not properly operate even though a warning message does not appear on the cluster. We recommend that the vehicle be inspected by an authorized HYUNDAI dealer.
Use only genuine parts to repair or replace a damaged front radar cover. Do not apply paint to the front radar cover.
Driver assistance system
7-4
System settings Setting functions for the system
OTM070090N
Forward Safety With the engine on, select Driver AssistanceForwardSafetyfromthe Settings menu to set whether or not to use each function. - If Active Assist is selected, the
system will warn the driver with a warning message and an audible warning depending on the collision risk levels. Braking assist will be applied depending on the collision risk.
- If Warning Only is selected, the system will warn the driver with a warning message and an audible warning depending on the collision risk levels. Braking will not be assisted.
- If Off is selected, the system will turn off. The warning light will illuminate on the cluster.
The driver can monitor Forward Collision-Avoidance Assist ON/OFF status from the Settings menu. If the
warning light remains ON when the system is ON, we recommend that the system be inspected by an authorized HYUNDAI dealer.
WARNING When the engine is restarted, Forward Collision-Avoidance Assist will always turn on. However, if Off is selected after the engine is restarted, the driver should always be aware of the surroundings and drive safely.
CAUTION If Warning Only is selected, braking
is not assisted. The settings for Forward Safety
include Basic function and Junction Turning (if equipped).
Information Forward Collision-Avoidance Assist will turn off when ESC is turned off by pressing and holding the ESC OFF button for more than 3 seconds. The warning light will illuminate on the cluster.
07
7-5
OTM070140N
Warning Timing With the engine on, select Driver AssistanceWarningTimingfromthe Settings menu to change the initial warning activation time for Forward Collision-Avoidance Assist. When the vehicle is first delivered, Warning Timing is set to Normal. If you change the Warning Timing, the warning time of other Driver Assistance systems may change.
OTM070141N
Warning Volume With the engine on, select Driver AssistanceWarningVolumefromthe Settings menu to change the Warning Volume to High, Medium or Low for Forward Collision-Avoidance Assist. If you change the warning volume, the Warning Volume of other Driver Assistance systems may change.
CAUTION The setting of the Warning Timing
and Warning Volume applies to all functions of Forward Collision- Avoidance Assist.
Even though Normal is selected for Warning Timing, if the front vehicle suddenly stops, the initial warning activation time may seem late.
Select Late for Warning Timing when traffic is light and when driving speed is slow.
Information If the engine is restarted, Warning Timing and Warning Volume will maintain the last setting.
Driver assistance system
7-6
System operation Basic function System warning and control The basic function for Forward Collision- Avoidance Assist is to help warn and control the vehicle depending on the collision level: Collision Warning, Emergency Braking and Stopping vehicle and ending brake control.
OTM070143N
Collision Warning To warn the driver of a collision, the
Collision Warning warning message will appear on the cluster and an audible warning will sound.
If a vehicle is detected in front, the system will operate when your vehicle speed is between approximately 6~112 mph (10~180 km/h).
If a pedestrian or cyclist is detected in front, the system will operate when your vehicle speed is between approximately 6~53 mph (10~85 km/h).
If Active Assist is selected, braking may be assisted.
OTM070144N
Emergency Braking To warn the driver that emergency
braking will be assisted, the Emergency Braking warning message will appear on the cluster and an audible warning will sound.
If a vehicle is detected in front, the system will operate when your vehicle speed is between approximately 6~47 mph (10~75 km/h).
If a pedestrian or cyclist is detected in front, the system will operate when your vehicle speed is between approximately 6~40 mph (10~65 km/h).
In emergency braking situation, braking is assisted with strong braking power by the system to help prevent collision with the vehicle, pedestrian or cyclist ahead.
07
7-7
OTM070059L
Stopping vehicle and ending brake control When the vehicle is stopped due
to emergency braking, the Drive carefully warning message will appear on the cluster. For your safety, the driver should depress the brake pedal immediately and check the surroundings.
Brake control will end after the vehicle is stopped by emergency braking for approximately 2 seconds.
Junction Turning function (if equipped) System warning and control Junction Turning function will help warn and control the vehicle depending on the collision level: Collision Warning, Emergency Braking and Stopping vehicle and ending brake control Left-hand drive Right-hand drive
OTM070008N OTM070200N
Collision Warning To warn the driver of a collision, the
Collision Warning warning message will appear on the cluster and an audible warning will sound.
The system will operate when your vehicle speed is between approximately 6~19 mph (10~30 km/h) and the oncoming vehicle speed is between approximately 19~44 mph (30~70 km/h).
If Active Assist is selected, braking may be assisted.
Driver assistance system
7-8
Left-hand drive Right-hand drive
OTM070009N OTM070201N
Emergency Braking To warn the driver that emergency
braking will be assisted, the Emergency Braking warning message will appear on the cluster and an audible warning will sound.
The system will operate when your vehicle speed is between approximately 6~19 mph (10~30 km/h) and the oncoming vehicle speed is between approximately 19~44 mph (30~70 km/h).
In emergency braking situation, braking is assisted with strong braking power by the system to help prevent collision with the oncoming vehicle.
Information If the driver's seat is on the left side, Junction Turning function will operate only when the driver turns left. If the driver's seat position is on right side, the function will operate only when you turn right.
OTM070059L
Stopping vehicle and ending brake control When the vehicle is stopped due
to emergency braking, the Drive carefully warning message will appear on the cluster. For your safety, the driver should depress the brake pedal immediately and check the surroundings.
Brake control will end after the vehicle is stopped by emergency braking for approximately 2 seconds.
07
7-9
WARNING Take the following precautions when using Forward Collision-Avoidance Assist: For your safety, change the Settings
after parking the vehicle at a safe location.
With Active Assist or Warning Only selected, when ESC is turned off by pressing and holding the ESC OFF button for more than 3 seconds, Forward Collision-Avoidance Assist will turn off automatically. In this case, the system cannot be set from the Settings menu and the warning light will illuminate on the cluster which is normal. If ESC is turned on by pressing the ESC OFF button, Forward Collision-Avoidance Assist will maintain the last setting.
Forward Collision-Avoidance Assist does not operate in all situations or cannot avoid all collisions.
The driver should hold the responsibility to control the vehicle. Do not solely depend on Forward Collision-Avoidance Assist. Rather, maintain a safe braking distance, and if necessary, depress the brake pedal to reduce driving speed or to stop the vehicle.
Never deliberately operate Forward Collision-Avoidance Assist on people, animal, objects, etc. It may cause serious injury or death.
Forward Collision-Avoidance Assist may not operate if the driver depresses the brake pedal to avoid collision.
Depending on the road and driving conditions, Forward Collision- Avoidance Assist may warn the driver late or may not warn the driver.
During Forward Collision-Avoidance Assist operation, the vehicle may stop suddenly injuring passengers and shifting loose objects. Always have the seat belt on and keep loose objects secured.
If any other systems warning message is displayed or audible warning is generated, Forward Collision-Avoidance Assist warning message may not be displayed and audible warning may not be generated.
You may not hear the warning sound of Forward Collision-Avoidance Assist if the surrounding is noisy.
Forward Collision-Avoidance Assist may turn off or may not operate properly or may operate unnecessarily depending on the road conditions and the surroundings.
WARNING Even if there is a problem with
Forward Collision-Avoidance Assist, the vehicles basic braking performance will operate normally.
During emergency braking, braking control by the system will automatically cancel when the driver excessively depresses the accelerator pedal or sharply steers the vehicle.
Driver assistance system
7-10
CAUTION Forward Collision-Avoidance
Assist operating speed range may reduce due to the conditions of the vehicle or pedestrian in front or surroundings. Depending on the speed, the system may only warn the driver, or the system may not operate.
Forward Collision-Avoidance Assist will operate under certain conditions by judging the risk level based on the condition of the oncoming vehicle, driving direction, speed and surroundings.
Information In a situation where collision is imminent, braking may be assisted by Forward Collision-Avoidance Assist when braking is insufficient by the driver.
System malfunction and limitations System malfunction Type A Type B
OTM070094N OTM070094L
When Forward Collision-Avoidance Assist is not working properly, the Check Forward Safety system(s) warning message will appear, and the and
warning lights will illuminate on the cluster. We recommend that the system be inspected by an authorized HYUNDAI dealer.
07
7-11
System disabled
OTM070093N OTM070095N
When the front windshield where the front view camera is located, front radar cover or sensor is covered with foreign material, such as snow or rain, it can reduce the detecting performance and temporarily limit or disable Forward Collision-Avoidance Assist. If this occurs the Forward Safety system(s) disabled. Camera obscured or the Forward Safety system(s) disabled. Radar blocked warning message, and the and warning lights will illuminate on the cluster. The system will operate normally when when such snow, rain or foreign material is removed. If the system does not operate normally after obstruction (snow, rain, or foreign material) is removed, we recommend that the system be inspected by an authorized HYUNDAI dealer.
WARNING Even though the warning message or
warning light does not appear on the cluster, Forward Collision-Avoidance Assist may not properly operate.
Forward Collision-Avoidance Assist may not properly operate in an area (e.g. open terrain), where any substance are not detected after turning ON the engine.
Limitations of the system Forward Collision-Avoidance Assist may not operate normally, or the system may operate unexpectedly under the following circumstances: The detecting sensor or the
surroundings are contaminated or damaged
The temperature around the front view camera is high or low
The camera lens is contaminated due to tinted, filmed or coated windshield, damaged glass, or stuck of foreign material (sticker, bug, etc.) on the glass
Moisture is not removed or frozen on the windshield
Washer fluid is continuously sprayed, or the wiper is on
Driving in heavy rain or snow, or thick fog
The field of view of the front view camera is obstructed by sun glare
Street light or light from an oncoming vehicle is reflected on the wet road surface, such as a puddle on the road
An object is placed on the dashboard
Driver assistance system
7-12
Your vehicle is being towed The surrounding is very bright The surrounding is very dark, such as
in a tunnel, etc. The brightness changes suddenly, for
example when entering or exiting a tunnel
The brightness outside is low, and the headlamps are not on or are not bright
Driving through steam, smoke or shadow
Only part of the vehicle, pedestrian or cyclist is detected
The vehicle in front is a bus, heavy truck, truck with a unusually shaped luggage, trailer, etc.
The vehicle in front has no tail lights, tail lights are located unusually, etc.
The brightness outside is low, and the tail lamps are not on or are not bright
The rear of the front vehicle is small or the vehicle does not look normal, such as when the vehicle is tilted, overturned, or the side of the vehicle is visible, etc.
The front vehicles ground clearance is low or high
A vehicle, pedestrian or cyclist suddenly cuts in front
The bumper around the front radar is impacted, damaged or the front radar is out of position
The temperature around the front radar is high or low
Driving through a tunnel or iron bridge Driving in large areas where there are
few vehicles or structures (i.e. desert, meadow, suburb, etc.)
Driving near areas containing metal substances, such as a construction zone, railroad, etc.
A material is near that reflects very well on the front radar, such as a guardrail, nearby vehicle, etc.
The cyclist in front is on a bicycle made of material that does not reflect on the front radar
The vehicle in front is detected late The vehicle in front is suddenly
blocked by a obstacle The vehicle in front suddenly changes
lane or suddenly reduces speed The vehicle in front is bent out of
shape The front vehicles speed is fast or
slow The vehicle in front steers in the
opposite direction of your vehicle to avoid a collision
With a vehicle in front, your vehicle changes lane at low speed
The vehicle in front is covered with snow
You are departing or returning to the lane
Unstable driving You are on a roundabout and the
vehicle in front is not detected You are continuously driving in a circle The vehicle in front has an unusual
shape The vehicle in front is driving uphill or
downhill
07
7-13
The pedestrian or cyclist is not fully detected, for example, if the pedestrian is leaning over or is not fully walking upright
The pedestrian or cyclist is wearing clothing or equipment that makes it difficult to detect as a pedestrian or cyclist
OADAS044
The illustration above shows the image the front view camera is capable of detecting as a vehicle, pedestrian and cyclist. The pedestrian or cyclist in front is
moving very quickly The pedestrian or cyclist in front is
short or is posing a low posture The pedestrian or cyclist in front has
impaired mobility The pedestrian or cyclist in front is
moving intersected with the driving direction
There is a group of pedestrians, cyclists or a large crowd in front
The pedestrian or cyclist is wearing clothing that easily blends into the background, making it difficult to detect
The pedestrian or cyclist is difficult to distinguish from the similar shaped structure in the surroundings
You are driving by a pedestrian, cyclist, traffic sign, structure, etc. near the intersection
Driving in a parking lot Driving through a tollgate,
construction area, unpaved road, partial paved road, uneven road, speed bumps, etc.
Driving on an incline road, curved road, etc.
Driving through a roadside with trees or streetlights
The adverse road conditions cause excessive vehicle vibrations while driving
Your vehicle height is low or high due to heavy loads, abnormal tire pressure, etc.
Driving through a narrow road where trees or grass are overgrown
There is interference by electromagnetic waves, such as driving in an area with strong radio waves or electrical noise
Driver assistance system
7-14
WARNING Driving on a curve
OADAS014
OADAS016 OADAS018
Forward Collision-Avoidance Assist may not detect other vehicles, pedestrians or cyclists in front of you on curved roads adversely affecting the performance of the sensors. This may result in no warning or braking assist when necessary. When driving on a curve, you must maintain a safe braking distance, and if necessary, steer the vehicle and depress the brake pedal to reduce your driving speed in order to maintain a safe distance.
OADAS015
OADAS017 OADAS019
Forward Collision-Avoidance Assist may detect a vehicle, pedestrian or cyclist in the next lane or outside the lane when driving on a curved road. If this occurs, the system may unnecessarily warn the driver and control the brake. Always check the traffic conditions around the vehicle.
07
7-15
Driving on a slope
OADAS012
OADAS010 OADAS011
Forward Collision-Avoidance Assist may not detect other vehicles, pedestrians or cyclists in front of you while driving uphill or downhill adversely affecting the performance of the sensors. This may result in unnecessary warning or braking assist, or no warning or braking assist when necessary. Also, vehicle speed may rapidly decrease when a vehicle, pedestrian or cyclist ahead is suddenly detected. Always have your eyes on the road while driving uphill or downhill and if necessary, steer your vehicle and depress the brake pedal to reduce your driving speed in order to maintain a safe distance.
Changing lanes
OADAS030
[A] : Your vehicle, [B] : Lane changing vehicle
When a vehicle moves into your lane from an adjacent lane, it cannot be detected by the sensor until it is in the sensor's detection range. Forward Collision-Avoidance Assist may not immediately detect the vehicle when the vehicle changes lanes abruptly. In this case, you must maintain a safe braking distance, and if necessary, steer your vehicle and depress the brake pedal to reduce your driving speed in order to maintain a safe distance.
Driver assistance system
7-16
OADAS031
[A] : Your vehicle, [B] : Lane changing vehicle, [C] : Same lane vehicle
When a vehicle in front of you merges out of the lane, Forward Collision-Avoidance Assist may not immediately detect the vehicle that is now in front of you. In this case, you must maintain a safe braking distance, and if necessary, steer your vehicle and depress the brake pedal to reduce your driving speed in order to maintain a safe distance.
Detecting vehicle
OTM070147
If the vehicle in front of you has cargo that extends rearward from the cab, or when the vehicle in front of you has higher ground clearance, additional special attention is required. Forward Collision- Avoidance Assist may not be able to detect the cargo extending from the vehicle. In these instances, you must maintain a safe braking distance from the rearmost object, and if necessary, steer your vehicle and depress the brake pedal to reduce your driving speed in order to maintain distance.
07
7-17
WARNING When you are towing a trailer or
another vehicle, we recommend that Forward Collision-Avoidance Assist is turned off due to safety reasons.
Forward Collision-Avoidance Assist may operate if objects that are similar in shape or characteristics to vehicles, pedestrians and cyclists are detected.
Forward Collision-Avoidance Assist does not operate on bicycles, motorcycles, or smaller wheeled objects, such as luggage bags, shopping carts, or strollers.
Forward Collision-Avoidance Assist may not operate normally if interfered by strong electromagnetic waves.
Forward Collision-Avoidance Assist may not operate for 15 seconds after the vehicle is started, or the front view camera is initialized.
Information In some instances, FCA system may be cancelled when subjected to electromagnetic interference.
Information This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1. This device may not cause harmful
interference. 2. This device must accept any
interference received, including interference that may cause undesired operation.
Driver assistance system
7-18
LAnE kEEpIng AssIsT (LkA) Lane Keeping Assist is designed to help detect lane markings (or road edges) while driving over a certain speed. The system will warn the driver if the vehicle leaves the lane without using the turn signal, or will automatically assist the drivers steering to help prevent the vehicle from departing the lane.
Detecting sensor
OTM070001
[1] : Front view camera
The front view camera is used as a detecting sensor to detect lane markings (or road edges). Refer to the picture above for the detailed location of the detecting sensor.
CAUTION For more details on the precautions of the front view camera, refer to Forward Collision-Avoidance Assist (FCA) section in chapter 7.
System settings Setting functions for the system
OTM070184N
Lane Safety With the engine on, select Driver AssistanceLaneSafetyfromthe Settings menu to set whether or not to use each function. - If Assist is selected, the system
will automatically assist the drivers steering when lane departure is detected to help prevent the vehicle from moving out of its lane.
- If 'Warning Only' is selected, the system will warn the driver with an audible warning when lane departure is detected. The driver must steer the vehicle.
- If Off is selected, the system will turn off. The indicator light will turn off on the cluster.
WARNING If 'Warning Only' is selected, steering
is not assisted. Lane Keeping Assist does not control
the steering wheel when the vehicle is driven in the middle of the lane.
The driver should always be aware of the surroundings and steer the vehicle if Off is selected.
07
7-19
Turning the system On/Off (Lane Safety button)
OTMA070001C
With the engine on, press and hold the Lane Safety button located on the instrument panel to turn on Lane Keeping Assist. The white indicator light will illuminate on the cluster. Press and hold the button again to turn off the system. If the engine is restarted, Lane Keeping Assist will maintain the last setting.
Information When Lane Keeping Assist is turned off with the Lane Safety button, Lane Safety settings will turn off.
Turning the system On/Off (Lane Driving Assist button)
OTM070063
With the engine on, press and hold the Lane Driving Assist button located on the steering wheel to turn on Lane Keeping Assist. The white indicator light will illuminate on the cluster. Press and hold the button again to turn off the system. If the engine is restarted, Lane Keeping Assist will maintain the last setting.
CAUTION When the Lane Driving Assist button is pressed shortly, Lane Following Assist will turn on and off.
Driver assistance system
7-20
OTM070141N
Warning Volume With the engine on, select Driver AssistanceWarningVolumefromthe Settings menu to change the Warning Volume to High, Medium or Low for Lane Keeping Assist. If you change the Warning Volume, the Warning Volume of other Driver Assistance systems may be changed.
System operation System warning and control Lane Keeping Assist will help warn and control the vehicle with Lane Departure Warning and Lane Keeping Assist.
Left Right
OTM070027 OTM070028
Lane Departure Warning To warn the driver that the vehicle is
departing from the projected lane in front, the green indicator light will blink on the cluster, the lane line will blink on the cluster depending on which direction the vehicle is veering, and an audible warning will sound.
The system will operate when your vehicle speed is between approximately 40~120 mph (60~200 km/h).
07
7-21
Lane Keeping Assist To warn the driver that the vehicle
is departing from the projected lane in front, the green indicator light will blink on the cluster, and the steering wheel will make adjustments to keep the vehicle inside the lane.
The system will operate when your vehicle speed is between approximately 40~120 mph (60~200 km/h).
Type A Type B
OTM070037N OTM070037L
Hands-off warning If the driver takes their hands off the steering wheel for several seconds, the Place hands on the steering wheel (or Keep hands on the steering wheel) warning message will appear on the cluster, and an audible warning will sound in stages.
WARNING The steering wheel may not be
assisted if the steering wheel is held very tight or the steering wheel is steered over a certain degree.
Lane Keeping Assist does not operate at all times. It is the responsibility of the driver to safely steer the vehicle and to maintain the vehicle in its lane.
The handsoff warning message may appear late depending on road conditions. Always have your hands on the steering wheel while driving.
If the steering wheel is held very lightly, the handsoff warning message may appear because the system may not recognize that the driver has their hands on the steering wheel.
If you attach objects to the steering wheel, the hands-off warning may not work properly.
Driver assistance system
7-22
Information You may change settings from the
instrument cluster (User Settings) or infotainment system (Vehicle Settings), whichever option that is provided with your vehicle. For more details, see "User Settings" section in chapter 4, or "Vehicle Settings" section in supplied Infotainment Manual.
When lane markings (or road edges) are detected, the lane lines on the cluster will change from grey to white and the green indicator light will illuminate. Lane undetected Lane detected
OTM070025 OTM070026
Even though the steering is assisted by Lane Keeping Assist, the driver may control the steering wheel.
The steering wheel may feel heavier or lighter when the steering wheel is assisted by Lane Keeping Assist than when it is not.
System malfunction and limitations System malfunction Type A Type B
OTM070035N OTM070035L
When Lane Keeping Assist is not working properly, the Check Lane Keeping Assist (LKA) system (or Check LKA (Lane Keeping Assist) system) warning message will appear and the yellow
indicator light will illuminate on the cluster. If this occurs, we recommend that the system be inspected by an authorized HYUNDAI dealer.
07
7-23
Limitations of the system Lane Keeping Assist may not operate normally or may operate unexpectedly under the following circumstances: The lane is contaminated or difficult
to distinguish because, - The lane markings (or road edge)
is covered with rain, snow, dirt, oil, etc.
- The color of the lane marking (or road edge) is not distinguishable from the road
- There are markings (or road edges) on the road near the lane or the markings (or road edges) on the road looks similar to the lane markings (or road edge)
- The lane marking (or road edge) is indistinct or damaged
- The shadow is on the lane marking (or road edge) by a median strip, trees, guardrail, noise barriers, etc.
There are more than two lane markings (or road edges) on the road
The lane number increases or decreases, or the lane markings (or road edges) are crossing
The lane markings (or road edges) are complicated or a structure substitutes for the lines, such as a construction area
There are road markings, such as zigzag lanes, crosswalk markings and road signs
The lane suddenly disappears, such as at the intersection
The lane (or road width) is very wide or narrow
There is a road edge without a lane There is a boundary structure in the
roadway, such as a tollgate, sidewalk, curb, etc.
The distance to the front vehicle is extremely short or the vehicle in front is covering the lane marking (or road edge)
For more details on the limitations of the front view camera, refer to Forward Collision-Avoidance Assist (FCA) section in chapter 7.
WARNING Take the following precautions when using Lane Keeping Assist: The driver should hold the
responsibility to safely drive and control the vehicle. Do not solely rely on the system and drive dangerously.
The operation of Lane Keeping Assist can be cancelled or not work properly depending on road conditions and surroundings. Always be cautious while driving.
Refer to Limitations of the System if the lane is not detected properly.
When you are towing a trailer or another vehicle, we recommend that Lane Keeping Assist is turned off due to safety reasons.
If the vehicle is driven at high speed, the steering wheel will not be controlled. The driver must always follow the speed limit when using the system.
Driver assistance system
7-24
If any other systems warning message is displayed or audible warning is generated, Lane Keeping Assist warning message may not be displayed and audible warning may not be generated.
You may not hear the warning sound of Lane Keeping Assist if the surrounding is noisy.
If you attach objects to the steering wheel, steering may not be assisted properly.
Lane Keeping Assist may not operate for 15 seconds after the vehicle is started, or the front view camera is initialized.
Lane Keeping Assist will not operate when: - The turn signal or hazard warning
flasher is turned on - The vehicle is not driven in the
center of the lane when the system is turned on or right after changing a lane
- ESC (Electronic Stability Control) or VSM (Vehicle Stability Management) is activated
- The vehicle is driven on a sharp curve
- 35 mph (55 km/h) or above 130 mph (210 km/h)
- The vehicle makes sharp lane changes
- The vehicle brakes suddenly
07
7-25
bLInD-spOT COLLIsIOn-AVOIDAnCE AssIsT (bCA) (IF EQUIppED) Blind-Spot Collision-Avoidance Assist is designed to help detect and monitor approaching vehicles in the drivers blind spot area and warn the driver of a possible collision with a warning message and audible warning. In addition, if there is a risk of collision when changing lanes or driving forward out of a parking space, the system will help avoid a collision by applying the brake.
OJX1079256
Blind-Spot Collision-Avoidance Assist helps detect and inform the driver that a vehicle is in the blind spot.
CAUTION The detecting range may vary depending on the speed of your vehicle. However, even if there is a vehicle in the blind spot area, the system may not warn you when you pass by at high speeds.
OJX1079026
Blind-Spot Collision Assist helps detect and informs the driver that a vehicle is approaching at high speed from the blind spot area.
CAUTION Warning timing may vary depending on the speed of the vehicle approaching at high speed.
OJX1079027
When changing lanes by detecting the lane ahead, if the system judges that there is a collision risk with an approaching vehicle in the blind spot, the system will help avoid a collision by applying the brake.
Driver assistance system
7-26
OJX1079028
When you are driving forward out of a parking space, if the system judges that there is a collision risk with an approaching vehicle in the blind spot, the system will help avoid a collision by applying the brake.
Information In the following text, Blind-Spot Collision- Avoidance Assist will be referred as Blind- Spot Safety system.
Detecting sensor
OTM070001
OTM070002
[1] : Front view camera, [2] : Rear corner radar
Refer to the picture above for the detailed location of the detecting sensors.
07
7-27
CAUTION Take the following precautions to maintain optimal performance of the detecting sensor: Never disassemble the rear corner
radar or radar assembly, or apply any impact on it.
If there is impact on the rear corner radar or near the radar, even though the warning message does not appear on the cluster, Blind-Spot Safety system may not operate properly. We recommend that the system be inspected by an authorized HYUNDAI dealer.
If the rear corner radars have been replaced or repaired, we recommend that the vehicle be inspected by an authorized HYUNDAI dealer.
Use only genuine parts to repair the rear bumper where the rear corner radar is located.
Do not apply license plate frame or objects, such as a bumper sticker, film or a bumper guard near the rear corner radar.
The system may not work properly if the bumper has been replaced, or the surroundings of the rear corner radar has been damaged or paint has been applied.
If a trailer, carrier, etc. is installed, it may adversely affect the performance of the rear corner radar or the system may not operate.
For more details on the precautions of the front view camera, refer to Forward Collision-Avoidance Assist (FCA) section in chapter 7.
System settings Setting functions for the system
OTM070096N
Blind-Spot Safety With the engine on, select Driver AssistanceBlind-SpotSafetyfromthe Settings menu to set whether or not to use each function. - If Active Assist is selected, the
system will warn the driver with a warning message, an audible warning and braking assist will be applied depending on the collision risk levels.
- If Warning Only is selected, the system will warn the driver with a warning message and an audible warning depending on the collision risk levels. Braking will not be assisted.
- If Off is selected, the system will turn off.
Driver assistance system
7-28
OTM070097N
When the engine is restarted with the system off, the Blind-Spot Safety System is Off message will appear on the cluster. If you change the setting from Off to Active Assist or Warning Only, the warning light on the side view mirror will blink for three seconds. In addition, if the engine is turned on, when the system is set to Active Assist or Warning Only, the warning light on the side view mirror will blink for three seconds.
WARNING If Warning Only is selected, braking
is not assisted. If Off is selected, the driver should
always be aware of the surroundings and drive safely.
Information If the engine is restarted, Blind-Spot Safety system will maintain the last setting.
OTM070140N
Warning Timing With the engine on, select Driver AssistanceWarningTimingfromthe Settings menu to change the initial warning activation time for Blind-Spot Safety system. When the vehicle is first delivered, Warning Timing is set to Normal. If you change the Warning Timing, the warning time of other Driver Assistance systems may change.
07
7-29
OTM070141N
Warning Volume With the engine on, select Driver AssistanceWarningVolumefromthe Settings menu to change the Warning Volume to High, Medium or Low for Blind-Spot Safety system. If you change the Warning Volume, the warning volume of other Driver Assistance systems may change.
CAUTION The setting of the Warning Timing
and Warning Volume applies to all functions of the Blind-Spot Safety system.
Even though Normal is selected for Warning Timing, if the vehicles approaches at high speed, the initial warning activation time may seem late.
Select Late for Warning Timing when traffic is light and when driving speed is slow.
System operation System warning and control
OHY059034
Vehicle detection To warn the driver a vehicle is
detected, the warning light on the side view mirror and head-up display (if equipped) will illuminate.
The system will operate when your vehicle speed is above 12 mph (20 km/h) and the speed of the vehicle in the blind spot area is above 7 mph (10 km/h).
Driver assistance system
7-30
Collision Warning Collision warning will operate when
the turn signal is turned on in the direction of the detected vehicle.
If Warning Only is selected from the Settings menu, the collision warning will operate when your vehicle approaches the lane the blind spot vehicle is detected.
To warn the driver of a collision, the warning light on the side view mirror and head-up display (if equipped) will blink. At the same time, an audible warning will sound.
When the turn signal is turned off or you move away from the lane, the collision warning will be canceled and the system will return to vehicle detection state.
WARNING The detecting range of the rear
corner radar is determined by a standard road width, therefore, on a narrow road, the system may detect other vehicles in the next next lane and warn you. In contrast, on a wide road, the system may not be able to detect a vehicle driving in the next lane and may not warn you.
When the hazard warning flasher is on, the collision warning by the turn signal will not operate.
Information If the driver's seat is on the left side, the collision warning may occur when you turn left. Maintain a proper distance with the vehicles in the left lane. If the driver's seat is on the right side, the collision warning may occur when you turn right. Maintain a proper distance with the vehicles in the right lane.
07
7-31
OTM070017N
Collision-Avoidance Assist (while driving) To warn the driver of a collision, the
warning light on the side view mirror will blink and a warning message will appear on the cluster. At the same time, an audible warning will sound and warning light on the head-up display (if equipped) will blink.
The system will operate when your vehicle speed is between 40~120 mph (60~200 km/h) and both lane markings of the driving lane are detected.
Emergency braking will be assisted to help prevent collision with the vehicle in the blind spot area.
WARNING Collision-Avoidance Assist will
be canceled under the following circumstances: - Your vehicle enters the next lane
by a certain distance - Your vehicle is away from the
collision risk - The steering wheel is sharply
steered - The brake pedal is depressed - Forward Collision-Avoidance Assist
is operating After system operation or lane
change, you must drive to the center of the lane. The system will not operate if the vehicle is not driven in the center of the lane.
Driver assistance system
7-32
OTM070240N
Collision-Avoidance Assist (while departing) To warn the driver of a collision, the
warning light on the side view mirror will blink and a warning message will appear on the cluster. At the same time, an audible warning will sound and warning light on the head-up display (if equipped) will blink.
The system will operate when your vehicle speed is below 2 mph (3 km/h) and the speed of the vehicle in the blind spot area is above 3 mph (5 km/h).
Emergency braking will be assisted to help prevent collision with the vehicle in the blind spot area.
OTM070059L
Stopping vehicle and ending brake control When the vehicle is stopped due
to emergency braking, the Drive carefully warning message will appear on the cluster. For your safety, the driver should depress the brake pedal immediately and check the surroundings.
Brake control will end after the vehicle is stopped by emergency braking for approximately 2 seconds.
07
7-33
WARNING Take the following precautions when using Blind-Spot Safety system: For your safety, change the Settings
after parking the vehicle at a safe location.
If any other systems warning message is displayed or audible warning is generated, Blind-Spot Safety systems warning message may not be displayed and audible warning may not be generated.
You may not hear the warning sound of Blind-Spot Safety system if the surrounding is noisy.
Blind-Spot Safety system may not operate if the driver applies the brake pedal to avoid collision.
When Blind-Spot Safety system is operating, braking control by the system will automatically cancel when the driver excessively depresses the accelerator pedal or sharply steers the vehicle.
During Blind-Spot Safety system operation, the vehicle may stop suddenly injuring passengers and shifting loose objects. Always have the seat belt on and keep loose objects secured.
Even if there is a problem with Blind- Spot Safety system, the vehicles basic braking performance will operate normally.
Blind-Spot Safety system does not operate in all situations or cannot avoid all collisions.
Blind-Spot Safety system may warn the driver late or may not warn the driver depending on the road and driving conditions.
Driver should maintain control of the vehicle at all times. Do not depend on Blind-Spot Safety system. Maintain a safe braking distance, and if necessary, depress the brake pedal to reduce driving speed or to stop the vehicle.
Never operate Blind-Spot Safety system on people, animal, objects, etc. It may cause serious injury or death.
WARNING The brake control may not operate properly depending on the status of ESC (Electronic Stability Control). There will only be a warning when: - The ESC (Electronic Stability Control)
warning light is on - ESC (Electronic Stability Control) is
engaged in a different function
Driver assistance system
7-34
System malfunction and limitations System malfunction
OTM070099N
When Blind-Spot Safety system is not working properly, the Check Blind-Spot Safety system(s) warning message will appear on the cluster, and the system will turn off automatically or the system will be limited. We recommend that the system be inspected by an authorized HYUNDAI dealer.
Type A Type B
OTM070100N OTM070100L
When the side view mirror warning light is not working properly, the Check side view mirror warning light (or 'Check outside mirror warning icon') warning message will appear on the cluster. We recommend that the system be inspected by an authorized HYUNDAI dealer.
System disabled
OTM070098N
When the rear bumper around the rear corner radar or sensor is covered with foreign material, such as snow or rain, or installing a trailer or carrier, it can reduce the detecting performance and temporarily limit or disable Blind-Spot Safety system. If this occurs, the Blind-Spot Safety system(s) disabled. Radar blocked warning message will appear on the cluster. The system will operate normally when such foreign material or trailer, etc. is removed, and then the engine is restarted. If the system does not operate normally after it is removed, we recommend that the system be inspected by an authorized HYUNDAI dealer.
WARNING Even though the warning message
does not appear on the cluster, Blind- Spot Safety system may not properly operate.
Blind-Spot Safety system may not properly operate in an area (e.g. open terrain) where any objects are not detected right after the engine is turned on, or when the detecting sensor is blocked with foreign material right after the engine is turned on.
07
7-35
CAUTION Turn off Blind-Spot Safety system to install a trailer, carrier, etc., or remove the trailer, carrier, etc. to use Blind-Spot Safety system.
Limitations of the system Blind-Spot Safety system may not operate normally, or the system may operate unexpectedly under the following circumstances: There is inclement weather, such as
heavy snow, heavy rain, etc. The rear corner radar is covered with
snow, rain, dirt, etc. The temperature around the rear
corner radar is high or low Driving on a highway (or motorway)
ramp The road pavement (or the peripheral
ground) abnormally contains metallic components (i.e. possibly due to subway construction)
There is a fixed object near the vehicle, such as sound barriers, guardrails, central dividers, entry barriers, street lamps, signs, tunnels, walls, etc. (including double structures)
Driving in large areas where there are few vehicles or structures (i.e. desert, meadow, suburb, etc.)
Driving through a narrow road where trees or grass are overgrown
Driving on a wet road surface, such as a puddle on the road
The other vehicle drives very close behind your vehicle, or the other vehicle passes by your vehicle in close proximity
The speed of the other vehicle is very fast that it passes by your vehicle in a short time
Your vehicle passes by the other vehicle
Your vehicle changes lane Your vehicle has started at the same
time as the vehicle next to you and has accelerated
The vehicle in the next lane moves two lanes away from you, or when the vehicle two lanes away moves to the next lane from you
A trailer or carrier is installed around the rear corner radar
The bumper around the rear corner radar is covered with objects, such as a bumper sticker, bumper guard, bike rack, etc.
The bumper around the rear corner radar is impacted, damaged or the radar is out of position
Your vehicle height is low or high due to heavy loads, abnormal tire pressure, etc.
Blind-Spot Safety system may not operate normally, or the system may operate unexpectedly when the following objects are detected: A motorcycle or bicycle is detected A vehicle such as a flat trailer is
detected A big vehicle such as a bus or truck is
detected A moving obstacle such as a
pedestrian, animal, shopping cart or a baby stroller is detected
A vehicle with low height such as a sports car is detected
Driver assistance system
7-36
Braking control may not work, drivers attention is required in the following circumstances: The vehicle severely vibrates while
driving over a bumpy road, uneven road or concrete patch
Driving on a slippery surface due to snow, water puddle, ice, etc.
The tire pressure is low or a tire is damaged
The brake is reworked The vehicle makes abrupt lane
changes
For more details on the limitations of the front view camera, refer to Forward Collision-Avoidance Assist (FCA) and Lane Keeping Assist (LKA) section in chapter 7.
WARNING Driving on a curve
OJX1079057
Blind-Spot Safety system may not operate properly when driving on a curved road. The system may not detect the vehicle in the next lane. Always pay attention to road and driving conditions while driving.
OJX1079058
Blind-Spot Safety system may not operate properly when driving on a curved road. The system may recognize a vehicle in the same lane. Always pay attention to road and driving conditions while driving.
07
7-37
Driving where the road is merging/ dividing
OJX1079059
Blind-Spot Safety system may not operate properly when driving where the road merges or divides. The system may not detect the vehicle in the next lane. Always pay attention to road and driving conditions while driving.
Driving on a slope
OTM070031
Blind-Spot Safety system may not operate properly when driving on a slope. The system may not detect the vehicle in the next lane or may incorrectly detect the ground or structure. Always pay attention to road and driving conditions while driving.
Information Radio frequency radiation exposure information: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 8 in. (20 cm) between the radiator (antenna) and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Driver assistance system
7-38
Driving where the heights of the lanes are different
OTM070032
Blind-Spot Safety system may not operate properly when driving where the heights of the lanes are different. The system may not detect the vehicle on a road with different lane heights (underpass joining section, grade separated intersections, etc.). Always pay attention to road and driving conditions while driving.
WARNING When you are towing a trailer or
another vehicle, make sure that you turn off Blind-Spot Safety system.
Blind-Spot Safety system may not operate normally if interfered by strong electromagnetic waves.
Blind-Spot Safety system may not operate for 3 seconds after the vehicle is started, or the front view camera or rear corner radars are initialized.
Information This device complies with Part 15 of the FCC rules. Operation is subject to the following three conditions: 1. This device may not cause harmful
interference, and 2. This device must accept any
interference received, including interference that may cause undesired operation.
3. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the device.
Information Radio frequency radiation exposure information: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 8 in. (20 cm) between the radiator (antenna) and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
07
7-39
sAFE ExIT AssIsT (sEA) (IF EQUIppED)
OTM070238
After the vehicle stops, when an approaching vehicle from the rear area is detected as soon as a passenger opens a door, Safe Exit Assist will warn the driver with a warning message and an audible warning to help prevent a collision.
OTM070039
In addition, when the electronic child safety lock button is in the LOCK position and an approaching vehicle from the rear area is detected, the electronic child safety lock button will not unlock even if the driver presses the button to prevent the rear doors from opening.
CAUTION Warning timing may vary depending on the speed of the approaching vehicle.
Detecting sensor
OTM070146
[1] : Rear corner radar
The rear corner radars are sensors located inside the rear bumper to detect the side and rear areas. Always keep the rear bumper clean for proper operation of Safe Exit Assist.
NOTICE For more details on the precautions of the rear corner radars, refer to Blind- Spot Collision Assist (BCA) section in chapter 7.
Driver assistance system
7-40
System settings Setting functions for the system
OTM070038N
Safe Exit Assist With the engine on, select Driver AssistanceBlind-SpotSafetySafe Exit Assist (SEA) (or SEA (Safe Exit Assist) from the Settings menu to turn on Safe Exit Assist and deselect to turn off the system.
WARNING The driver should always be aware of unexpected and sudden situations from occurring. If Safe Exit Assist is deselected, the system cannot assist you.
Information If the engine is restarted, Safe Exit Assist will maintain the last setting.
OTM070140N
Warning Timing With the engine on, select Driver AssistanceWarningTimingfromthe Settings menu to change the initial warning activation time for Blind-Spot Safety system. When the vehicle is first delivered, Warning Timing is set to Normal. If you change the Warning Timing, the warning time of other Driver Assistance systems may change.
07
7-41
OTM070141N
Warning Volume With the engine on, select Driver AssistanceWarningVolumefromthe Settings menu to change the Warning Volume High, Medium and Low for Blind-Spot Safety system. If you change the Warning Volume, the Warning Volume of other Driver Assistance systems may change.
CAUTION The setting of the Warning Timing
and Warning Volume applies to all functions of the Safe Exit Assist.
Even though Normal is selected for Warning Timing, if the vehicles approaches at high speed from the rear, the initial warning activation time may seem late.
Select Late for Warning Timing when traffic is light.
System operation Warning and control
OTM070101N
Collision warning when exiting vehicle When an approaching vehicle from
the rear is detected, the Watch (out) for traffic warning message will appear on the cluster, and an audible warning will sound.
Safe Exit Assist will warn the driver when your vehicle speed is below 2 mph (3 km/h), and the speed of the approaching vehicle from the rear is above 3 mph (5 km/h).
Driver assistance system
7-42
OTM070145L
System linked with Electronic child safety lock When Electric child safety lock is
operating and an approaching vehicle from the rear area is detected, the rear doors cannot be unlocked even if the driver tries to unlock the rear doors using the electronic child safety lock button. The Check surroundings then try again warning message will appear on the cluster.
Safe Exit Assist will warn the driver when vehicle speed is below 2 mph (3 km/h) and the speed of the approaching vehicle from the rear is above 3 mph (5 km/h).
For more details on electric child safety lock button, refer to Electronic Child Safety Lock section in chapter 5.
CAUTION If the driver presses the electronic child lock button again within 10 seconds after the warning message appears, Safe Exit Assist judges that the driver has unlocked the doors acknowledging the rear status. The electronic child safety lock will turn off (button indicator OFF) and the rear doors will unlock. Always check the surroundings before turning off the electronic child safety lock button.
WARNING Take the following precautions when using Safe Exit Assist: For your safety, change the Settings
after parking the vehicle at a safe location.
If any other systems warning message is displayed or audible warning is generated, Safe Exit Assist warning message may not be displayed and audible warning may not be generated.
You may not hear the warning sound of Safe Exit Assist if the surrounding is noisy.
Safe Exit Assist does not operate in all situations or cannot prevent all collisions.
Safe Exit Assist may warn the driver late or may not warn the driver depending on the road and driving conditions. Always check vehicle surroundings.
07
7-43
The driver and passengers are responsible for accidents that occurs while exiting the vehicle. Always check the surroundings before you exit the vehicle.
Never deliberately operate Safe Exit Assist. Doing so may lead to serious injury or death.
Safe Exit Assist does not operate if there is a problem with Blind- Spot Safety system. There may be a problem with Blind Spot Safety system when: - Blind Spot Safety system warning
light appears - Blind-Spot Safety system sensor or
the sensor surrounding is polluted or covered
- Blind-Spot Safety system fails to warn passengers or falsely warn passengers
Information After the engine is turned off, Safe Exit Assist operates approximately for 3 minutes, but turns off immediately if the doors are locked.
System malfunction and limitations System malfunction
OTM070099N
When Safe Exit Assist is not working properly, the Check Blind-Spot Safety system(s) warning message will appear on the cluster, and the system will turn off automatically or the system will be limited. We recommend that the system be inspected by an authorized HYUNDAI dealer.
Driver assistance system
7-44
System disabled
OTM070098N
When the rear bumper around the rear corner radar or sensor is covered with foreign material, such as snow or rain, or installing a trailer or carrier, it can reduce the detecting performance and temporarily limit or disable Safe Exit Assist. If this occurs, the Blind-Spot Safety system(s) disabled. Radar blocked warning message will appear on the cluster. The system will operate normally when such foreign material or trailer, etc. is removed, and then the engine is restarted. If the system does not operate normally after it is removed, we recommend that the system be inspected by an authorized HYUNDAI dealer.
WARNING Even though the warning message
does not appear on the cluster, Safe Exit Assist may not properly operate.
Safe Exit Assist may not properly operate in an area (e.g. open terrain) where any objects are not detected right after the engine is turned on, or when the detecting sensor is blocked with foreign material right after the engine is turned on.
CAUTION Turn off Safe Exit Assist to install a trailer, carrier, etc., or remove the trailer, carrier, etc. to use Safe Exit Assist.
Limitations of the system Safe Exit Assist may not operate normally, or the system may operate unexpectedly under the following circumstances: Getting out of the vehicle where trees
or grass are overgrown Getting out of the vehicle where the
road is wet The approaching vehicle is very fast or
very slow
For more details on the limitations of the rear corner radar, refer to Blind- Spot Collision-Avoidance Assist (BCA) section in chapter 7.
WARNING Safe Exit Assist may not operate
normally if interfered by strong electromagnetic waves.
Safe Exit Assist may not operate for 3 seconds after the vehicle is started, or the rear corner radars are initialized.
07
7-45
DRIVER ATTEnTIOn WARnIng (DAW) Basic function Driver Attention Warning will help determine the driver's attention level by analyzing driving pattern, driving time, etc. while vehicle is being driven. The system will recommend a break when the drivers attention level falls below a certain level.
Leading Vehicle Departure Alert function Leading Vehicle Departure Alert function will inform the driver when a detected vehicle in front departs from a stop.
Detecting sensor
OTM070001
[1] : Front view camera
The front view camera is used to detect driving patterns and front vehicle departure while vehicle is being driven. Refer to the picture above for the detailed location of the detecting sensor.
CAUTION Always keep the front view camera in good condition to maintain optimal performance of Driver Attention Warning. For more details on the precautions of the front view camera, refer to Forward Collision-Avoidance Assist (FCA) section in chapter 7.
System settings Setting functions for the system Type A Type B
OTM070188N OTM070188L
Driver Attention Warning With the engine on, select Driver AssistanceDriverAttentionWarning(or DAW (Driver Attention Warning)) from the Settings menu to set whether or not to use each function. - If Inattentive Driving Warning (or
Swaying warning) is selected, the system will inform the driver of the drivers attention level and will recommend taking a break when the level falls below a certain level.
Type A Type B
OTM070189N OTM070189L
Leading Vehicle Departure Alert - If Leading Vehicle Departure Alert is
selected, the system will inform the driver when the front vehicle departs from a stop.
Driver assistance system
7-46
OTM070140N
Warning Timing With the engine on, select Driver AssistanceWarningTimingfromthe Settings menu to change the initial warning activation time for Driver Attention Warning. When the vehicle is first delivered, Warning Timing is set to Normal. If you change the Warning Timing, the warning time of other Driver Assistance systems may change.
Information If the engine is restarted, Driver Attention Warning will maintain the last setting.
System operation Basic function System display and warning The basic function of Driver Attention Warning is to inform the driver of their Attention Level and to warn the driver to Consider taking a break. Attention level System off Standby/Disabled
OTM070102N OTM070106N
Attentive driving Inattentive driving
OTMA070002 OTM070191N
The driver can monitor his/her driving conditions on the cluster. - When the Inattentive Driving
Warning is deselected from the Settings menu, System Off is displayed.
- The system will operate when vehicle speed is between 0~110 mph (0~180 km/h).
- When vehicle speed is not within the operating speed, the message Standby (or 'Disabled') will be displayed.
07
7-47
The drivers attention level is displayed on the scale of 1 to 5. The lower the level is, the more inattentive the driver is.
The level decreases when the driver does not take a break for a certain period of time.
Taking a break
OTM070105L
The Consider taking a break message will appear on the cluster and an audible warning will sound to suggest that the driver take a break, when the drivers attention level is below 1.
Driver Attention Warning will not suggest a break when the total driving time is shorter than 10 minutes or 10 minutes has not passed after the last break was suggested.
WARNING For your safety, change the Settings after parking the vehicle at a safe location.
CAUTION Driver Attention Warning may
suggest a break depending on the drivers driving pattern or habits, even if the driver doesnt feel fatigued.
Driver Attention Warning is a supplemental system and may not be able to determine whether the driver is inattentive.
The driver who feels fatigued should take a break at a safe location, even though there is no break suggestion by Driver Attention Warning.
Information You may change settings from the
instrument cluster (User Settings) or infotainment system (Vehicle Settings), whichever option that is provided with your vehicle. For more details, see "User Settings" section in chapter 4, or "Vehicle Settings" section in supplied Infotainment Manual.
Driver Attention Warning will reset the last break time to 00:00 in the following situations: - The engine is turned off - The driver unfastens the seat belt
and opens the drivers door - The vehicle is stopped for more than
10 minutes When the driver resets Driver Attention
Warning, the last break time is set to 00:00 and the drivers attention level is set to High.
Driver assistance system
7-48
Leading Vehicle Departure Alert function Type A Type B
OTM070042N OTM070042L
When the front vehicle departs from a stop, Leading Vehicle Departure Alert will inform the driver by displaying the Leading vehicle is driving away (or Leading vehicle is driving on) message on the cluster and an audible warning will sound.
WARNING If any other systems warning
message is displayed or audible warning is generated, Leading Vehicle Departure Alert's warning message may not be displayed and audible warning may not be generated.
The driver should hold the responsibility to safely drive and control the vehicle.
CAUTION Leading Vehicle Departure Alert is a
supplemental function and may not alert the driver whenever the front vehicle departs from a stop.
Always check the front of the vehicle and road conditions before departure.
System malfunction and limitations System malfunction
OTM070107L
When Driver Attention Warning is not working properly, the Check Driver Attention Warning (DAW) system warning message will appear on the cluster. If this occurs, we recommend that the system be inspected by an authorized HYUNDAI dealer.
Limitations of the system Driver Attention Warning may not work properly in the following situations: The vehicle is driven violently The vehicle intentionally crosses over
lanes frequently The vehicle is controlled by Driver
Assistance system, such as Lane Keeping Assist
07
7-49
Leading Vehicle Departure Alert feature When the vehicle cuts in
OADAS021
OADAS022
[A] : Your vehicle, [B] : Front vehicle
If a vehicle cuts in front of your vehicle, Leading Departure Alert may not operate properly.
When the vehicle ahead sharply steers
OADAS034
[A] : Your vehicle, [B] : Front vehicle
If the vehicle in front makes a sharp turn, such as to turn left or right or make a U-turn, etc., Leading Vehicle Departure Alert may not operate properly.
When the vehicle ahead abruptly departures
OADAS024
If the vehicle in front abruptly departures, Leading Vehicle Departure Alert may not operate properly.
Driver assistance system
7-50
When a pedestrian or bicycle is between you and the vehicle ahead
OADAS025
If there is a pedestrian(s) or bicycle(s) in between you and the vehicle in front, Leading Vehicle Departure Alert may not operate properly.
When in a parking lot
OADAS027
If a vehicle parked in front drives away from you, Leading Vehicle Departure Alert may alert you that the parked vehicle is driving away.
When driving at a tollgate or intersection, etc.
OADAS026
If you pass a tollgate or intersection with lots of vehicles or you drive where lanes are merged or divided frequently, Leading Vehicle Departure Alert may not operate properly.
CAUTION For more details on the precautions of the front view camera, refer to Forward Collision-Avoidance Assist (FCA) section in chapter 7.
07
7-51
bLInD-spOT VIEW mOnITOR (bVm) (IF EQUIppED) Left side Right side
OTM070014 OTM070015
Blind-Spot View Monitor displays the rear blind spot area of the vehicle in the cluster when the turn signal is turned on to help change lanes.
Detecting sensor
OTM070148
[1], [2] : SVM-side view camera (camera located at bottom of the mirror)
Refer to the picture above for the detailed location of the detecting sensors.
System settings Setting functions for the system Blind-Spot View With the engine on, select Driver AssistanceBlind-SpotSafetyBlind- Spot View from the Settings menu to turn on Blind-Spot View Monitor and deselect to turn off the system.
System operation Operating switch
OIG046417
Turn Signal switch Blind-Spot View Monitor will turn on and off when the turn signal is turned on and off.
Driver assistance system
7-52
Blind-Spot View Monitor Operating conditions When the left or right side turn signal turns on, the image in that direction is displayed on the instrument cluster.
Off conditions When the turn signal turns off, the
image on the instrument cluster will turn off.
When the hazard warning flasher is on, Blind-Spot View Monitor will turn off, regardless of the turn signal status.
When other important warning is displayed on the instrument cluster, Blind-Spot View Monitor may turn off.
System malfunction When Blind-Spot View Monitor is not working properly, or the cluster display flickers, or the camera image does not display normally, we recommend that the system be inspected by an authorized HYUNDAI dealer.
WARNING The image shown on the cluster may
differ from the actual distance of the object. Make sure to directly check the vehicle's surroundings for safety.
Always keep the camera lens clean. If the lens is covered with foreign material, it may adversely affect camera performance and Blind- Spot View Monitor may not operate normally.
07
7-53
smART CRUIsE COnTROL (sCC) Smart Cruise Control is designed to help detect the vehicle ahead and help maintain the desired speed and minimum distance between the vehicle ahead.
Overtaking Acceleration Assist While Smart Cruise Control is operating, if the system judges that the driver is determined to overtake the vehicle in front, acceleration will be assisted.
Detecting senor
OTM070001
OTM070022
[1] : Front view camera, [2] : Front radar
The front view camera and front radar are used as a detecting sensor to help detect the vehicles in front. Refer to the picture above for the detailed location of the detecting sensor.
CAUTION Always keep the front view camera and front radar in good condition to maintain optimal performance of Smart Cruise Control. For more details on the precautions of the front view camera and front radar, refer to Forward Collision-Avoidance Assist (FCA) section in chapter 7.
Driver assistance system
7-54
System settings Setting functions for the system
OTM070205L
[A] : Type A, [B] : Type B
To turn on the system Press the Driving Assist button to turn
on the system. The speed will be set to the current speed on the cluster.
If there is no vehicle in front of you, the set speed will be maintained, but if there is a vehicle in front of you, the speed may decrease to maintain the distance to the vehicle ahead. If the vehicle ahead accelerates, your vehicle will travel at a steady cruising speed after accelerating to the set speed.
Information If your vehicle speed is between 0~20
mph (0~30 km/h) when you press the Driving Assist button, the Smart Cruise Control speed will be set to 20 mph (30 km/h).
The Driving Assist button symbol may vary depending on your vehicle option.
OTM070206L
[A] : Type A, [B] : Type B
To set vehicle distance Each time the button is pressed, the vehicle distance changes as follows:
Distance 4 Distance 3
Distance 1
Distance 2
Information If you drive at 56 mph (90km/h), the
distance is maintained as follows: Distance 4 - approximately 172 ft. (53 m) Distance 3 - approximately 130 ft. (40m) Distance 2 - approximately 106 ft. (30m) Distance 1 - approximately 82 ft. (25m)
The distance is set to the last set distance when the engine is restarted, or when the system was temporarily canceled.
07
7-55
OTM070020
To increase speed Push the + switch up and release it
immediately. The cruising speed will increase by 1 mph (1 km/h) each time the switch is operated in this manner.
Push the + switch up and hold it while monitoring the set speed on the cluster. The cruising speed will increase by 5 mph or 10 km/h each time the switch is operated in this manner. Release the switch when the desired speed is shown, and the vehicle will accelerate to that speed. You can set the speed to 110 mph (100 km/h).
WARNING Check the driving condition before using the + switch. Driving speed may sharply increase when you push up and hold the + switch.
OTM070019
To decrease speed Push the - switch down and release it
immediately. The cruising speed will decrease by 1 mph (1 km/h) each time the switch is operated in this manner.
Push the - switch down and hold it while monitoring the set speed on the cluster. The cruising speed will decrease by 5 mph or 10 km/h each time the switch is operated in this manner. Release the switch at the speed you want to maintain. You can set the speed to 20 mph (30 km/h).
Driver assistance system
7-56
OTM070207L
[A] : Type A, [B] : Type B
To temporarily cancel the system Press the switch or depress the brake pedal to temporarily cancel Smart Cruise Control.
OTM070208L
[A] : Type A, [B] : Type B
To resume the system To resume Smart Cruise Control after the system was canceled, push the +, - or
switch. If you push the + switch up or - switch down, vehicle speed will be set to the current speed on the cluster. If you push the switch, vehicle speed will resume to the preset speed.
WARNING Check the driving condition before using the switch. Driving speed may sharply increase or decrease when you press the switch.
OTM070205L
[A] : Type A, [B] : Type B
To turn off the system Press the Driving Assist button to turn Smart Cruise Control system off.
Information If your vehicle is equipped with Manual Speed Limit Assist, press and hold the Driving Assist button to turn off Smart Cruise Control. However, Manual Speed Limit Assist will turn on.
07
7-57
Type A Type B
OTM070142N OTM070142L
Smart Cruise Control Reaction With the engine on, select Driver AssistanceSCCReaction(orSCC response) from the settings menu to select the sensitivity of vehicle speed when following the front vehicle to maintain the set distance.
OTM070141N
Warning Volume With the engine on, select Driver AssistanceWarningVolumefromthe Settings menu to change the Warning Volume High, Medium or Low for Smart Cruise Control. If you change the Warning Volume, the Warning Volume of other Driver Assistance systems may change.
Information If the engine is restarted, Warning Volume will maintain the last setting.
System operation Operating conditions Smart Cruise Control will operate when the following conditions are satisfied.
Basic function The gear is in D (Drive) The drivers door is closed EPB (Electronic Parking Brake) is not
applied Your vehicle speed is within the
operating speed range - 5~110 mph (10~180 km/h): when
there is no vehicle in front - 0~110 mph (0~180 km/h): when
there is a vehicle in front ESC (Electronic Stability Control), TCS
(Traction Control System) or ABS is on ESC (Electronic Stability Control), TCS
(Traction Control System) or ABS is not controlling the vehicle
Engine rpm is not in the red zone Forward Collision-Avoidance Assist
brake control is not operating Remote Smart Parking Assist brake
control is not operating
Information At a stop, if there is no vehicle in front of your vehicle, the system will turn on when the brake pedal is depressed.
Driver assistance system
7-58
Overtaking Acceleration Assist Overtaking Acceleration Assist will operate when the turn signal indicator is turned on to the left (left-hand drive) or turned on to the right (right-hand drive) while Smart Cruise Control is operating, and the following conditions are satisfied: Your vehicle speed is above 40 mph
(60 km/h) The hazard warning flasher is off A vehicle is detected in front of your
vehicle Deceleration is not needed to
maintain distance with the vehicle in front
WARNING When the turn signal indicator is
turned on to the left (left-hand drive) or turned on to the right (right- hand drive) while there is a vehicle ahead, the vehicle may accelerate temporarily. Pay attention to the road conditions at all times.
Regardless of your countries driving direction, Overtaking Acceleration Assist will operate when the conditions are satisfied. When using the function in countries with different driving direction, always check the road conditions at all times.
System display and control Basic function You can see the status of the Smart Cruise Control operation in the Driving Assist mode on the cluster. Refer to LCD Display Modes section in chapter 4. Smart Cruise Control will be displayed as below depending on the status of the system.
OTM070245E
When operating (1) Whether there is a vehicle ahead
and the selected distance level are displayed.
(2) Set speed is displayed. (3) Whether there is a vehicle ahead
and the target vehicle distance are displayed.
07
7-59
OTM070155E
When temporarily canceled (1) indicator is displayed. (2) The previous set speed is shaded.
Information The distance of the front vehicle on the
cluster is displayed according to the actual distance between your vehicle and the vehicle ahead.
The target distance may vary according to the vehicle speed and the set distance level. If vehicle speed is low, even though the vehicle distance have changed, the change of the target vehicle distance may be small.
To temporarily accelerate
OTMA070004
If you want to speed up temporarily when Smart Cruise Control is on, depress the accelerator pedal. While the speed is increasing, the set speed, distance level and target distance will blink on the cluster.
WARNING Be careful when accelerating temporarily, because the speed and distance is not controlled automatically even if there is a vehicle in front of you.
Driver assistance system
7-60
System temporarily canceled Type A Type B
OTM070113N OTM070113L
Smart Cruise Control will be temporarily canceled automatically when: The vehicle speed is above 120 mph
(190 km/h) The vehicle is stopped for a certain
period of time The accelerator pedal is continuously
depressed for a certain period of time The conditions for the Smart Cruise
Control to operate is not satisfied If the system is temporarily canceled automatically, the Smart Cruise Control canceled (or SCC (Smart Cruise Control) cancelled) warning message will appear on the cluster, and an audible warning will sound to warn the driver.
If the Smart Cruise Control is temporarily canceled while the vehicle is at a standstill with the system operating, EPB (Electronic Parking Brake) maybe applied.
WARNING When the system is temporarily canceled, distance with the front vehicle will not be maintained. Always have your eyes on the road while driving, and if necessary, depress the brake pedal to reduce your driving speed in order to maintain a safe distance.
System conditions not satisfied Type A Type B
OTM070112N OTM070112L
If the Driving Assist button, + switch, - switch or switch is pushed when the systems operating conditions are not satisfied, the Smart Cruise Control conditions not met (or SCC (Smart Cruise Ctrl. conditions not met) will appear on the cluster, and an audible warning will sound.
07
7-61
In traffic situation
OTM070114L
In traffic, your vehicle will stop if the vehicle ahead of you stops. Also, if the vehicle ahead of you starts moving, your vehicle will start as well. In addition, after the vehicle has stopped and a certain time have passed, the Use switch or pedal to accelerate message will appear on the cluster. Depress the accelerator pedal or push the + switch, - switch or
switch to start driving.
WARNING While the message is displayed on the cluster, if there is no vehicle in front or the vehicle is far away from you, and the + switch, switch or switch is pushed, Smart Cruise Control will automatically cancel and EPB will be applied. However, if the accelerator pedal is depressed, EPB will not be applied even though the system is canceled. Always pay attention to the road condition ahead.
Warning road conditions ahead
OTM070055L
In the following situation, the Watch for surrounding vehicles warning message will appear on the cluster, and an audible warning will sound to warn the driver of road conditions ahead. - The vehicle in front disappears when
Smart Cruise Control is maintaining the distance with the vehicle ahead while driving below a certain speed.
- While the Use switch or pedal to accelerate message is displayed on the cluster, if there is no vehicle in front or the vehicle is far away from you, and the + switch, switch or
switch is pushed.
WARNING Always pay attention to vehicles or objects that may suddenly appear in front of you, and if necessary, depress the brake pedal to reduce your driving speed in order to maintain a safe distance.
Driver assistance system
7-62
Collision Warning
OTM070143N
While Smart Cruise Control is operating, when the collision risk with the vehicle ahead is high, the Collision Warning warning message will appear on the cluster, and an audible warning will sound to warn the driver. Always have your eyes on the road while driving, and if necessary, depress the brake pedal to reduce your driving speed in order to maintain a safe distance.
WARNING In the following situations, Smart Cruise Control may not warn the driver of a collision. - The distance from the front vehicle
is near, or the vehicle speed of the front vehicle is faster or similar with your vehicle
- The speed of the front vehicle is very slow or is at a standstill
- The accelerator pedal is depressed right after Smart Cruise Control is turned on
WARNING Take the following precautions when using Smart Cruise Control: Smart Cruise Control does not
substitute for proper and safe driving. It is the responsibility of the driver to always check the speed and distance to the vehicle ahead.
Smart Cruise Control may not recognize unexpected and sudden situations or complex driving situations, so always pay attention to driving conditions and control your vehicle speed.
Keep Smart Cruise Control off when the system is not in use to avoid inadvertently setting a speed.
Do not open the door or leave the vehicle when Smart Cruise Control is operating, even if the vehicle is stopped.
Always be aware of the selected speed and vehicle distance.
Keep a safe distance according to road conditions and vehicle speed. If the vehicle distance is too close during high-speed driving, a serious collision may result.
When maintaining distance with the vehicle ahead, if the front vehicle disappears, the system may suddenly accelerate to the set speed. Always be aware of unexpected and sudden situations from occurring.
Vehicle speed may decrease on an upward slope and increase on a downward slope.
Always be aware of situations such as when a vehicle cuts in suddenly.
07
7-63
When you are towing a trailer or another vehicle, we recommend that Smart Cruise Control is turned off due to safety reasons.
Turn off Smart Cruise Control when your vehicle is being towed.
Smart Cruise Control may not operate normally if interfered by strong electromagnetic waves.
Smart Cruise Control may not detect an obstacle in front and lead to a collision. Always look ahead cautiously to prevent unexpected and sudden situations from occurring.
Vehicles moving in front of you with a frequent lane change may cause a delay in the system's reaction or may cause the system to react to a vehicle actually in an adjacent lane. Always drive cautiously to prevent unexpected and sudden situations from occurring.
Always be aware of the surroundings and drive safely, even though a warning message does not appear or an audible warning does not sound.
If any other systems warning message is displayed or warning sound is generated, Smart Cruise Control warning message may not be displayed and warning sound may not be generated.
You may not hear the warning sound of Forward Collision-Avoidance Assist if the surrounding is noisy.
The vehicle manufacturer is not responsible for any traffic violation or accidents caused by the driver.
Always set the vehicle speed to the speed limit in your country.
Information Smart Cruise Control may not operate
for 15 seconds after the vehicle is started or the front view camera or front radar is initialized.
You may hear a sound when the brake is controlled by Smart Cruise Control.
System malfunction and limitations System malfunction Type A Type B
OTM070116N OTM070116L
When Smart Cruise Control is not working properly, the Check Smart Cruise Control system (or Check SCC (Smart Cruise Control) system) warning message will appear, and the warning light will illuminate on the cluster. We recommend that the system be inspected by an authorized HYUNDAI dealer.
Driver assistance system
7-64
System disabled Type A Type B
OTM070115N OTM070115L
When the front radar cover or sensor is covered with snow, rain, or foreign material, it can reduce the detecting performance and temporarily limit or disable Smart Cruise Control. If this occurs the Smart Cruise Control disabled. Radar blocked (or SCC (Smart Cruise Control) disabled. Radar blocked) warning message will appear for a certain period of time on the cluster. The system will operate normally when snow, rain or foreign material is removed.
WARNING Even though the warning message
does not appear on the cluster, Smart Cruise Control may not properly operate.
Smart Cruise Control may not properly operate in an area (e.g. open terrain), where there is nothing to detect after turning ON the engine.
Limitations of the system Smart Cruise Control may not operate normally, or the system may operate unexpectedly under the following circumstances: The detecting sensor or the
surroundings are contaminated or damaged
Washer fluid is continuously sprayed, or the wiper is on
The camera lens is contaminated due to tinted, filmed or coated windshield, damaged glass, or stuck of foreign material (sticker, bug, etc.) on the glass
Moisture is not removed or frozen on the windshield
The field of view of the front view camera is obstructed by sun glare
Street light or light from an oncoming vehicle is reflected on the wet road surface, such as a puddle on the road
The temperature around the front view camera is high or low
An object is placed on the dashboard The surrounding is very bright The surrounding is very dark, such as
in a tunnel, etc. The brightness changes suddenly, for
example when entering or exiting a tunnel
The brightness outside is low, and the headlamps are not on or are not bright
Driving in heavy rain or snow, or thick fog
Driving through steam, smoke or shadow
07
7-65
Only part of the vehicle is detected The vehicle in front has no tail lights,
tail lights are located unusually, etc. The brightness outside is low, and the
tail lamps are not on or are not bright The rear of the front vehicle is small
or does not look normal (i.e. tilted, overturned, etc.)
The front vehicles ground clearance is low or high
A vehicle suddenly cuts in front Your vehicle is being towed Driving through a tunnel or iron bridge Driving near areas containing metal
substances, such as a construction zone, railroad, etc.
A material is near that reflects very well on the front radar, such as a guardrail, nearby vehicle, etc.
The bumper around the front radar is impacted, damaged or the front radar is out of position
The temperature around the front radar is high or low
Driving in large areas where there are few vehicles or structures (i.e. desert, meadow, suburb, etc.)
The vehicle in front is made of material that does not reflect on the front radar
Driving near a highway (or motorway) interchange or tollgate
Driving on a slippery surface due to snow, water puddle, ice, etc.
Driving on a curved road The vehicle in front is detected late The vehicle in front is suddenly
blocked by a obstacle The vehicle in front suddenly changes
lane or suddenly reduces speed
The vehicle in front is bent out of shape
The front vehicles speed is fast or slow
With a vehicle in front, your vehicle changes lane at low speed
The vehicle in front is covered with snow
Unstable driving You are on a roundabout and the
vehicle in front is not detected You are continuously driving in a circle Driving in a parking lot Driving through a construction area,
unpaved road, partial paved road, uneven road, speed bumps, etc.
Driving on an incline road, curved road, etc.
Driving through a roadside with trees or streetlights
The adverse road conditions cause excessive vehicle vibrations while driving
Your vehicle height is low or high due to heavy loads, abnormal tire pressure, etc.
Driving through a narrow road where trees or grass are overgrown
There is interference by electromagnetic waves, such as driving in an area with strong radio waves or electrical noise
Driver assistance system
7-66
Driving on a curve
OADAS014
On curves, Smart Cruise Control may not detect a vehicle in the same lane, and may accelerate to the set speed. Also, vehicle speed may rapidly decrease when the vehicle ahead is detected suddenly. Select the appropriate set speed on curves and apply the brake pedal or accelerator pedal according to the road and driving conditions ahead.
OADAS015
Your vehicle speed can be reduced due to a vehicle in the adjacent lane. Apply the accelerator pedal and select the appropriate set speed. Check to be sure that the road conditions permit safe operation of the Smart Cruise Control.
Driving on a slope
OADAS012
During uphill or downhill driving, the Smart Cruise Control may not detect a moving vehicle in your lane, and cause your vehicle to accelerate to the set speed. Also, vehicle speed will rapidly decrease when the vehicle ahead is detected suddenly. Select the appropriate set speed on inclines and apply the brake pedal or accelerator pedal according to the road and driving conditions ahead.
07
7-67
Changing lanes
OADAS030
[A] : Your vehicle, [B] : Lane changing vehicle
When a vehicle moves into your lane from an adjacent lane, it cannot be detected by the sensor until it is in the sensor's detection range. Smart Cruise Control may not immediately detect the vehicle when the vehicle changes lanes abruptly. In this case, you must maintain a safe braking distance, and if necessary, depress the brake pedal to reduce your driving speed in order to maintain a safe distance.
Detecting vehicle
OJX1079181
In the following cases, some vehicles in your lane cannot be detected by the sensor: - Vehicles offset to one side - Slow-moving vehicles or sudden-
decelerating vehicles - Oncoming vehicles - Stopped vehicles - Vehicles with small rear profile, such
as trailers - Narrow vehicles, such as
motorcycles or bicycles - Special vehicles - Animals and pedestrians
Adjust your vehicle speed by depressing the brake pedal according to the road and driving conditions ahead.
Driver assistance system
7-68
OTM070147
In the following cases, the vehicle in front cannot be detected by the sensor: - Vehicles with higher ground
clearance or vehicles carrying loads that stick out of the back of the vehicle
- Vehicles that has the front lifted due to heavy loads
- You are steering your vehicle - Driving on narrow or sharply curved
roads Adjust your vehicle speed by depressing the brake pedal according to the road and driving conditions ahead.
OTM058129
When a vehicle ahead disappears at an intersection, your vehicle may accelerate. Always pay attention to road and driving conditions while driving.
OTM058119
When a vehicle in front of you merges out of the lane, Smart Cruise Control may not immediately detect the new vehicle that is now in front of you. Always pay attention to road and driving conditions while driving.
07
7-69
OTM058124
Always look out for pedestrians when your vehicle is maintaining a distance with the vehicle ahead.
Information This device complies with Part 15 of the FCC rules. Operation is subject to the following three conditions: 1. This device may not cause harmful
interference, and 2. This device must accept any
interference received, including interference that may cause undesired operation.
3. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the device.
Information Radio frequency radiation exposure information: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 8 in. (20 cm) between the radiator (antenna) and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Driver assistance system
7-70
nAVIgATIOn-bAsED smART CRUIsE COnTROL (nsCC) (IF EQUIppED) Navigation-based Smart Cruise Control will help automatically adjust vehicle speed when driving on highways (or motorways) by using road information from the navigation system while Smart Cruise Control is operating.
Information Navigation-based Smart Cruise Control
is available only on controlled access road of certain highways.
Controlled access road indicates roads with limited entrances and exits that allow uninterrupted high speed traffic flow. Only passenger cars and motorcycles are allowed on controlled access roads.
Additional highways may be expanded by future navigation updates.
Information Navigation-based Smart Cruise Control operates on main roads of highways (or motorways), and does not operate on interchanges or junctions.
Highway Curve Zone Auto Slowdown If vehicle speed is high, Highway Curve Zone Auto Slowdown function will temporarily decelerate your vehicle or limit acceleration to help you drive safely on a curve based on the curve information from the navigation.
Highway Set Speed Auto Change Highway Set Speed Auto Change function automatically changes Smart Cruise Control set speed based on the speed limit information from the navigation.
System settings Setting functions for the system
OTM070192N
With the engine on, select Driver AssistanceDrivingConvenience Auto Highway Speed Control (or Auto motorway speed control) from the Settings menu to turn on Navigation- based Smart Cruise Control and deselect to turn off the system.
Highway Curve Zone Auto Slowdown With the engine on, select Driver AssistanceDrivingConvenience Highway Auto Curve Slowdown (or Curve slowdown (motorway)) from the Settings menu to turn on Highway Curve Zone Auto Slowdown and deselect to turn off the function.
Information When there is a problem with Navigation- based Smart Cruise Control, the system cannot be set from the Settings menu.
07
7-71
System operation Operating conditions Navigation-based Smart Cruise Control is ready to operate if all of the following conditions are satisfied: Smart Cruise Control is operating Driving on main roads of highways (or
motorways)
Information For more details on how to operate Smart Cruise Control, refer to Smart Cruise Control (SCC) section in chapter 7.
System display and control When Navigation-based Smart Cruise Control operates, it will be displayed on the cluster as follows: System standby
OTMA070006
If the operating conditions are satisfied, the white indicator will illuminate.
System operating
OTMA070005 OTMA070007
If temporary deceleration is required in the standby state and Navigation-based Smart Cruise Control is operating, the green symbol will illuminate on the cluster. If the Highway Set Speed Auto Change function operates, the green symbol and set speed will illuminate on the cluster, and an audible warning will sound.
WARNING
OTM070198L
Drive carefully warning message will appear in the following circumstances: - Navigation-based Smart Cruise
Control is not able to slow down your vehicle to a safe speed
Driver assistance system
7-72
Information Highway Curve Zone Auto Slowdown and Highway Set Speed Auto Change function uses the same symbol.
Highway Curve Zone Auto Slowdown Depending on the curve ahead on the
highway (or motorway), the vehicle will decelerate, and after passing the curve, the vehicle will accelerate to Smart Cruise Control set speed.
Vehicle deceleration time may differ depending on the vehicle speed and the degree of the curve on the road. The higher the driving speed, deceleration will start faster.
Highway Set Speed Auto Change Highway Set Speed Auto Change
function will operate when Smart Cruise Control set speed and the highway (or motorway) speed limit is matched.
While Highway Set Speed Auto Change function is operating, when the highway (or motorway) speed limit changes, Smart Cruise Control set speed automatically changes to the changed speed limit.
If Smart Cruise Control set speed is adjusted different from the speed limit, Highway Set Speed Auto Change function will be in the standby state.
If Highway Set Speed Auto Change function has changed to the standby state by driving on a road other than the highway (or motorway) main road, Highway Set Speed Auto Change function will operate again when you drive on the main road again without setting the set speed.
If Highway Set Speed Auto Change function has changed to the standby state by depressing the brake pedal or pressing the switch on the steering wheel, press the switch to restart the function.
Highway Set Speed Auto Change function does not operate on highway interchanges or junctions.
Information Highway Set Speed Auto Change
function only operates based on the speed limits of the highway (or motorway), it does not work with speed cameras.
When Highway Set Speed Auto Change function is operating, the vehicle automatically accelerates or decelerates when the highway (or motorway) speed limit changes.
The maximum set speed for Highway Set Speed Auto Change function is 86 mph (140 km/h).
If the speed limit of a new road is not updated in the navigation, Highway Set Speed Auto Change function may not operate properly.
If the speed unit is set to a unit other than the speed unit used in your country, Highway Set Speed Auto Change function may not operate properly.
07
7-73
Limitations of the system Navigation-based Smart Cruise Control may not operate normally under the following circumstances: The navigation is not working properly Speed limit and road information in
the navigation is not updated The map information and the actual
road is different because of real-time GPS data or map information error
The navigation searches for a route while driving
GPS signals are blocked in areas such as a tunnel
The navigation is updated while driving
Map information is not transmitted due to infotainment system's abnormal operation
A road that divides into two or more roads and joins again
The driver goes off course the route set in the navigation
The route to the destination is changed or canceled by resetting the navigation
The vehicle enters a service station or rest area
The speed limit of some sections changes according to the road situations
Android Auto or Car Play is operating The navigation cannot detect the
current vehicle position (ex: elevated roads including overpass adjacent to general roads or nearby roads exist in a parallel way)
The navigation is being updated while driving
The navigation is being restarted while driving
There is bad weather, such as heavy rain, heavy snow, etc.
Driving on a road under construction Driving on a road that is controlled Driving on a road that is sharply
curved Driving on roads with intersections,
roundabouts, straight entrances and exits, etc.
Driver assistance system
7-74
OJX1070280L
[1] : Set route, [2] : Branch line, [3] : Driving route, [4] : Main road, [5] : Curved road section
When there is a difference between the navigation set route (branch line) and the driving route (main road), Highway Curve Zone Auto Slowdown function may not operate until the driving route is recognized as the main road.
When the vehicle's driving route is recognized as the main road by maintaining the main road instead of the navigation set route, Highway Curve Zone Auto Slowdown function will operate. Depending on the distance to the curve and the current vehicle speed, vehicle deceleration may not be sufficient or may decelerate rapidly.
OJX1070281L
[1] : Set route, [2] : Branch line, [3] : Driving route, [4] : Main road, [5] : Curved road section
When there is a difference between the navigation route (main road) and the driving route (branch line), Highway Curve Zone Auto Slowdown function will operate based on the curve information on the main road.
When it is judged that you are driving out of the route by entering the highway interchange or junction, Highway Curve Zone Auto Slowdown function will not operate.
07
7-75
OJX1070282L
[1] : Driving route, [2] : Branch line, [3] : Curved road section, [4] : Main road
If there is no destination set on the navigation, Highway Curve Zone Auto Slowdown function will operate based on the curve information on the main road.
Even if you depart from the main road, Highway Curve Zone Auto Slowdown function may temporarily operate due to navigation information of the highway curve section.
WARNING Navigation-based Smart Cruise
Control is not a substitute for safe driving practices, but a convenience function. Always have your eyes on the road, and it is the responsibility of the driver to avoid violating traffic laws.
The navigations speed limit information may differ from the actual speed limit information on the road. It is the driver's responsibility to check the speed limit on the actual driving road or lane.
Navigation-based Smart Cruise Control will automatically be cancelled when you leave the highway (or motorway) main road. Always pay attention to road and driving conditions while driving.
Navigation-based Smart Cruise Control may not operate due to the existence of leading vehicles and the driving conditions of the vehicle. Always pay attention to road and driving conditions while driving.
When you are towing a trailer or another vehicle, we recommend that Navigation-based Smart Cruise Control is turned off due to safety reasons.
Driver assistance system
7-76
After you pass through a tollgate on a highway (or motorway), Navigation- based Smart Cruise Control will operate based on the first lane. If you enter one of the other lanes, the system may not operate properly.
The vehicle will accelerate if the driver depresses the accelerator pedal while Navigation-based Smart Cruise Control is operating, and the system will not decelerate the vehicle.
If the driver accelerates and releases the accelerator pedal while Navigation-based Smart Cruise Control is operating, the vehicle may not decelerate sufficiently or may rapidly decelerate to a safe speed.
If the curve is too large or too small, Navigation-based Smart Cruise Control may not operate.
Information The time gap could occur between
the navigations guidance and when Navigation-based Smart Cruise Control operation starts and ends.
The speed information on the cluster and navigation may differ.
Even if you are driving at a speed lower than Smart Cruise Control set speed, acceleration may be limited by the curve sections ahead.
If Navigation-based Smart Cruise Control is operating while leaving the main road to enter an interchange, junction, rest area, etc., the system may operate for a certain period of time.
Deceleration by Navigation-based Smart Cruise Control may feel it is not sufficient due to road conditions such as uneven road surfaces, narrow lanes, etc.
Information This device complies with Part 15 of the FCC rules. Operation is subject to the following three conditions: 1. This device may not cause harmful
interference, and 2. This device must accept any
interference received, including interference that may cause undesired operation.
3. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the device.
Information Radio frequency radiation exposure information: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 8 in. (20 cm) between the radiator (antenna) and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
07
7-77
LAnE FOLLOWIng AssIsT (LFA) (IF EQUIppED) Lane Following Assist is designed to help detect lane markings and/or vehicles on the road, and assists the drivers steering to help center the vehicle in the lane.
Detecting sensor
OTM070001
[1] : Front view camera
The front view camera is used as a detecting sensor to help detect lane markings and vehicles in front. Refer to the picture above for the detailed location of the detecting sensor.
CAUTION For more details on the precautions of the front view camera, refer to Forward Collision-Avoidance Assist (FCA) section in chapter 7.
System settings Setting functions for the system
OTM070063
Turning the system ON/OFF With the engine on, shortly press the Lane Driving Assist button located on the steering wheel to turn on Lane Following Assist. The white or green indicator light will illuminate on the cluster. Press the button again to turn off the system. If the engine is restarted, Lane Following Assist will maintain the last setting.
Driver assistance system
7-78
OTM070141N
Warning Volume With the engine on, select Driver AssistanceWarningVolumefromthe Settings menu to change the Warning Volume to High, Medium or Low for Hands-off warning. If you change the Warning Volume, the Warning Volume of other Driver Assistance systems may change.
System operation Warning and control
OTMA070008
Lane Following Assist If the vehicle ahead and/or both lane markings are detected and your vehicle speed is below 110 mph (180 km/h), the green indicator light will illuminate on the cluster, and the system will help center the vehicle in the lane by assisting the steering wheel.
CAUTION When the steering wheel is not assisted, the green indicator light will blink and change to white.
07
7-79
Type A Type B
OTM070037N OTM070037L
Hands-off warning If the driver takes their hands off the steering wheel for several seconds, the Place hands on the steering wheel (or Keep hands on the steering wheel) warning message will appear and an audible warning will sound in stages. First stage : Warning message Second stage : Warning message (red
steering wheel) and audible warning
Type A Type B
OTM070117N OTM070117L
If the driver still does not have their hands on the steering wheel after the hands-off warning, the Lane Following Assist (LFA) canceled (or LFA (Lane Following Assist) cancelled) warning message will appear and Lane Following Assist will be automatically canceled.
WARNING Lane Following Assist does not
operate at all times. It is the responsibility of the driver to safely steer the vehicle and to maintain the vehicle in its lane.
The handsoff warning message may appear late depending on road conditions. Always have your hands on the steering wheel while driving.
If the steering wheel is held very lightly the handsoff warning message may appear because the system may not recognize that the driver has their hands on the steering wheel.
If you attach objects to the steering wheel, the hands-off warning may not work properly.
Driver assistance system
7-80
Information You may change settings from the
instrument cluster (User Settings) or infotainment system (Vehicle Settings), whichever option that is provided with your vehicle. For more details, see "User Settings" section in chapter 4, or "Vehicle Settings" section in supplied Infotainment Manual.
When both lane markings are detected, the lane lines on the cluster will change from grey to white. Lane undetected Lane detected
OTM070025 OTM070026
If lane markings are not detected, steering wheel control by Lane Following Assist can be limited depending on whether a vehicle is in front or the driving conditions of the vehicle.
Even though the steering is assisted by Lane Following Assist, the driver may control the steering wheel.
The steering wheel may feel heavier or lighter when the steering wheel is assisted by Lane Following Assist than when it is not.
System malfunction and limitations System malfunction Type A Type B
OTM070118N OTM070118L
When Lane Following Assist is not working properly, the Check Lane Following Assist (LFA) system (or Check LFA (Lane Following Assist) system) warning message will appear on the cluster. If this occurs, we recommend that the system be inspected by an authorized HYUNDAI dealer.
Limitations of the system For more details on system limitations, refer to Lane Keeping Assist (LKA) section in chapter 7.
WARNING For more details on the system precautions, refer to Lane Keeping Assist (LKA) section in chapter 7.
07
7-81
hIghWAY DRIVIng AssIsT (hDA) (IF EQUIppED) Highway Driving Assist is designed to help detect vehicles and lanes ahead, and help maintain distance from the vehicle ahead, maintain the set speed, and help center the vehicle in the lane while driving on the highway (or motorway).
OADAS035
Information The Highway Driving Assist is available
only on controlled access road of certain highways.
Controlled access road indicates roads with limited entrances and exits that allow uninterrupted high speed traffic flow. Only passenger cars and motorcycles are allowed on controlled access roads.
Additional highways may be expanded by future navigation updates.
Detecting sensor
OTM070001
OTM070022
[1] : Front view camera, [2] : Front radar
Refer to the picture above for the detailed location of the detecting sensors.
CAUTION For more details on the precautions of the detecting sensors, refer to Forward Collision-Avoidance Assist (FCA) section in chapter 7.
Driver assistance system
7-82
System settings Setting functions for the system
OTM070193N
Highway Driving Assist With the engine on, select or deselect DriverAssistanceDrivingConvenience from the Settings menu to set whether or not to use the following function(s). - If Highway Driving Assist (or HDA
(Motorway Driving Assist)) is selected, it helps maintain distance from the vehicle ahead, maintain the set speed, and helps center the vehicle in the lane.
Information If there is a problem with the
function(s), the settings cannot be changed. We recommend that the system be inspected by an authorized HYUNDAI dealer.
If the engine is restarted, the function(s) will maintain the last setting.
WARNING For your safety, change the Settings after parking the vehicle at a safe location.
OTM070141N
Warning Volume With the engine on, select Driver AssistanceWarningVolumefromthe Settings menu to change the Warning Volume to High, Medium or Low for Hands-off warning. If you change the Warning Volume, the Warning Volume of other Driver Assistance systems may change.
07
7-83
System operation System display and control You can see the status of the Highway Driving Assist operation in the Driving Assist mode on the cluster. Refer to LCD Display Modes section in chapter 4. Highway Driving Assist will be displayed as below depending on the status of the system. Operating state Standby state
OTMA070009 OTMA070010
(1) Highway Driving Assist indicator, whether there is a vehicle ahead and the selected distance level are displayed. Highway Driving Assist indicator
- Green : Operating state - White : Standby state
(2) Set speed is displayed. (3) Lane Following Assist indicator
displayed. (4) Whether there is a vehicle ahead and
the selected vehicle distance are displayed.
(5) Whether the lane is detected or not is displayed.
For more details on the display refer to Smart Cruise Control (SCC) and Lane Following Assist (LFA) sections in chapter 7.
System operating Highway Driving Assist will operate when entering or driving on the main road of highways (or motorways), and satisfying all the following conditions: - Lane Following Assist is operating - Smart Cruise Control is operating
Information While driving on the highway (or
motorway), if Smart Cruise Control starts operating, Highway Driving Assist will operate.
When entering the main roads of highways (or motorways), Highway Driving Assist will not turn on if the Lane Following Assist is turned off even when Smart Cruise Control is operating.
Driver assistance system
7-84
Restarting after stopping
OTM070114L
When Highway Driving Assist is operating, your vehicle will stop if the vehicle ahead of you stops. Also, if the vehicle ahead of you starts moving within 30 seconds after the stop, your vehicle will start as well. In addition, after the vehicle has stopped and 30 seconds have passed, the Use switch or pedal to accelerate message will appear on the cluster. Depress the accelerator pedal or push the + switch, - switch or switch to start driving.
Hands-off warning Type A Type B
OTM070037N OTM070037L
If the driver takes their hands off the steering wheel for several seconds, the Place hands on the steering wheel (or Keep hands on the steering wheel) warning message will appear and an audible warning will sound in stages. First stage : Warning message Second stage : Warning message (red
steering wheel) and audible warning
Type A Type B
OTM070195N OTM070195L
If the driver still does not have their hands on the steering wheel after the hands-off warning, the Highway Driving Assist (HDA) canceled (or HDA (Highway Driving Assist) cancelled) warning message will appear and Highway Driving Assist and Lane Change Assist will be automatically canceled.
07
7-85
System standby When Smart Cruise Control is temporarily canceled while Highway Driving Assist is operating, Highway Driving Assist will be in the standby state. At this time, Lane Following Assist will operate normally.
System malfunction and limitations System malfunction
Type A Type B
OTM070120N OTM070120L
When Highway Driving Assist or Highway Lane Change function is not working properly, the Check Highway Driving Assist (HDA) system (or 'Check HDA (Motorway Driving Assist) system') warning message will appear, and the
warning light will illuminate on the cluster. We recommend that the system be inspected by an authorized HYUNDAI dealer.
WARNING The driver is responsible for
controlling the vehicle for safe driving.
Always have your hands on the steering wheel while driving.
Highway Driving Assist is a supplemental system that assists the driver in driving the vehicle and is not a complete autonomous driving system. Always check road conditions, and if necessary, take appropriate actions to drive safely.
Always have your eyes on the road, and it is the responsibility of the driver to avoid violating traffic laws. The vehicle manufacturer is not responsible for any traffic violation or accidents caused by the driver.
Highway Driving Assist may not be able to recognize all traffic situations. The system may not detect possible collisions due to limitations of the system. Always be aware of the limitations of the system. Obstacles such as vehicles, motorcycles, bicycles, pedestrians, unspecified objects, structures, etc. that may collide with the vehicle may not be detected.
Highway Driving Assist will turn off automatically under the following situations: - Driving on roads that the system
does not operate, such as a rest area, intersection, junction, etc.
- The navigation does not operate properly such as when the navigation is being updated or restarted
Driver assistance system
7-86
Highway Driving Assist may inadvertently operate or turn off depending on road conditions (navigation information) and surroundings.
Lane Following Assist function may be temporarily disabled when the front view camera cannot detect lanes properly or the hands-off warning is on.
You may not hear the warning sound of Highway Driving Assist if the surrounding is noisy.
If the vehicle is driven at high speed above a certain speed at a curve, your vehicle may drive to one side or may depart from the driving lane.
When you are towing a trailer or another vehicle, we recommend that Highway Driving Assist is turned off due to safety reasons.
The handsoff warning message may appear early or late depending on how the steering wheel is held or road conditions. Always have your hands on the steering wheel while driving.
For your safety, please read the owner's manual before using the Highway Driving Assist.
Highway Driving Assist will not operate when the engine is started, or when the detecting sensors or navigation is being initialized.
Limitations of the system Highway Driving Assist may not operate normally, or may not operate under the following circumstances: The map information and the
actual road is different because the navigation is not updated
The map information and the actual road is different because of real-time GPS data or map information error
The infotainment system is overloaded by simultaneously performing functions such as route search, video playback, voice recognition, etc.
GPS signals are blocked in areas such as a tunnel
The driver goes off course or the route to the destination is changed or canceled by resetting the navigation
The vehicle enters a service station or rest area
Android Auto or Car Play is operating The navigation cannot detect the
current vehicle position (ex: elevated roads including overpass adjacent to general roads or nearby roads exist in a parallel way)
For more details on the limitations of the front view camera, front radar, front corner radar and rear corner radar, refer to Forward Collision-Avoidance Assist (FCA) section in chapter 7.
07
7-87
Information This device complies with Part 15 of the FCC rules. Operation is subject to the following three conditions: 1. This device may not cause harmful
interference, and 2. This device must accept any
interference received, including interference that may cause undesired operation.
3. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the device.
Information Radio frequency radiation exposure information: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 8 in. (20 cm) between the radiator (antenna) and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Driver assistance system
7-88
OTM070070
OTM070071
Rear View Monitor will show the area behind the vehicle to assist you when parking or backing up.
Camera
OTM070167
[1] : Rear view camera
Refer to the picture above for the detailed location of the camera.
REAR VIEW mOnITOR (RVm) (IF EQUIppED)
07
7-89
System settings Camera settings
OTM070210L
You can change Rear View Monitor Display Contents or Display Settings by touching the setup icon ( ) on the screen while Rear View Monitor is operating, or selecting Driver AssistanceParkingSafetyCamera Settings from the Settings menu while the engine is on.
In the Display Contents, you can change settings for Rear View, and in the Display Settings, you can change the screens Brightness and Contrast.
System operation Operating button
OTM070072
Parking/View button Press the Parking/View button (1) to turn on Rear View Monitor. Press the button again to turn off the system.
Driver assistance system
7-90
Rear view Operating conditions Shift the gear to R (Reverse), the
image will appear on the screen. Press the Parking/View button (1)
while the gear is in P (Park), the image will appear on the screen. However, parking guidance is not displayed.
Off conditions The rear view cannot be turned off
when the gear is in R (Reverse). Press the Parking/View button (1)
again while the gear is in P (Park) with the rear view on the screen, the rear view will turn off.
Shift the gear from R (Reverse) to P (Park), the rear view will turn off.
Maintaining rear view The rear view will maintain showing on the screen to help you when parking. However, parking guidance is not displayed.
Operating conditions Shift the gear from R (Reverse) to N (Neutral) or D (Drive), the rear view will appear on the screen.
Off conditions When vehicle speed is above 6 mph
(10 km/h), the rear view will turn off. Shift the gear to P (Park), the rear view
will turn off.
Rear top view
OTM070212L
When you touch the icon, the top view is displayed on the screen and shows the distance from the vehicle in the back of your vehicle while parking.
07
7-91
System malfunction and limitations System malfunction When Rear View Monitor is not working properly, or the screen flickers, or the camera image does not display normally, we recommend that the system be inspected by an authorized HYUNDAI dealer.
Limitations of the system When the vehicle is stopped for a long time in winter or when the vehicle is parked in an indoor parking lot, the exhaust fumes may temporarily blur the image.
WARNING The rear view camera does not
cover the complete area behind the vehicle. The driver should always check the rear area directly through the inside and side view mirror before parking or backing up.
The image shown on the screen may differ from the actual distance of the object. Make sure to directly check the vehicle's surroundings for safety.
Always keep the rear view camera lens clean. If the lens is covered with foreign material, it may adversely affect camera performance and Rear View Monitor may not operate normally.
Driver assistance system
7-92
sURROUnD VIEW mOnITOR (sVm) (IF EQUIppED)
OTM070183
OTM070182
Surround View Monitor can help assist in parking using the cameras installed on the vehicle and displays images around the vehicle through the infotainment system screen. Parking Assist View function helps
the driver to see the surroundings of the vehicle in a parking situation in various view modes.
Camera
OTM070239
OTM070171
[1] : SVM-front view camera, [2],[3] : SVM-side view camera
(under the side view mirror), [4] : SVM-rear view camera
Refer to the picture above for the detailed location of the cameras.
07
7-93
System settings Camera settings
OTM070213L
You can change Surround View Monitor Display Contents or Display Settings by touching the setup icon ( ) on the screen while Surround View Monitor is operating, or selecting DriverAssistanceParkingSafety Camera Settings from the Settings menu while the engine is on.
In the Display Contents, you can change settings for Top View Parking Guidance, Rear View Parking Guidance and Parking Distance Warning.
In the Display Settings, you can change the screens Brightness and Contrast.
Top View Parking Guidance Front top view
OTMA070003
Rear top view
OTM070214L
When the Top View Parking Guidance is selected, parking guidance is displayed on the right side of the Surround View Monitor screen.
You may see the front top view or the rear top view when using Top View Parking Guidance.
Driver assistance system
7-94
Rear View Parking Guidance
OTM070216L
When the Rear View Parking Guidance is selected, parking guidance is displayed in the rear view.
The horizontal guideline of the Rear View Parking Guidance shows the distance of 1.6 ft (0.5m), 3.3 ft (1 m) and 7.6 ft (2.3m) from the vehicle.
Parking Distance Warning
OTM070217L
When the Parking Distance Warning is selected, parking distance warning is displayed on the right side of the Surround View Monitor screen.
The image will be displayed only when Parking Distance Warning is warning the driver.
Surround View Monitor Auto On With the engine on, select Driver AssistanceParkingSafetySurround View Monitor Auto On from the Settings menu to use the function. To use this function, refer to System Operation.
System operation Operating button
OTM070072
OTM070074
Press the Parking/View button (1) to turn on Surround View Monitor. Press the button again to turn off the system.
Other view modes can be selected by touching the view icons (2) on the Surround View Monitor screen.
When one of the infotainment system button (3) is pressed without the gear in R (Reverse), Surround View Monitor will turn off.
07
7-95
Front view The front image is displayed on the screen when the gear is in N (Neutral) or D (Drive) to assist in parking. The front view has a top view/front view/side view.
Operating conditions Front view function will operate when
the following conditions are satisfied: - While the infotainment system
screen is being displayed, press the Parking/View button (1) briefly when the gear is in D (Drive) or N (Neutral) and vehicle speed is below 9 mph (15 km/h).
Surround View Monitor Auto On function will operate when the following conditions are satisfied: - WithDriverAssistanceParking SafetySurroundViewMonitor Auto On selected from the Settings menu, the front parking assist view screen is displayed when Parking Distance Warning warns the driver while driving in D (Drive).
Off conditions Press the Parking/View button (1)
again, the image will turn off. When vehicle speed is above 9 mph
(15 km/h) with the gear in D (Drive), Surround View Monitor will turn off and the screen will change back to the previous infotainment system screen. Although you drive below 9 mph (15 km/h) again, Surround View Monitor will not turn on.
Press one of the infotainment system button (3), the screen will change to the infotainment system screen.
Shift the gear to P (Park), the image will turn off.
Rear view The rear image is displayed on the screen when the gear is in R (Revers) or P (Park) to assist in parking. The rear view has a top view/rear view/side view.
Operating conditions Shift the gear to R (Reverse), the
image will appear on the screen. Press the Parking/View button (1)
while the gear is in P (Park), the image will appear on the screen. However, parking guidance is not displayed.
Off conditions The image cannot be turned off when
the gear is in R (Reverse). Shift the gear from R (Reverse) to P
(Park), the image will turn off. Press the Parking/View button (1)
again while the gear is in P (Park) with the image on the screen.
Driver assistance system
7-96
System malfunction and limitations System malfunction When Surround View Monitor is not working properly, or the screen flickers, or the camera image does not display normally, we recommend that the system be inspected by an authorized HYUNDAI dealer.
Limitations of the system When the vehicle is stopped for a long
time in winter or when the vehicle is parked in an indoor parking lot, the exhaust fumes may temporarily blur the image.
The screen may be displayed abnormally, and an icon will appear at the top left side of the screen under the following circumstances: - The liftgate is opened - The driver or front passenger door
is opened - The side view mirror is folded
WARNING ALWAYS look around your vehicle
to make sure there are no objects or obstacles before moving the vehicle. What you see on the screen may differ from the actual vehicles location.
The image shown on the screen may differ from the actual distance of the object. Make sure to directly check the vehicle's surroundings for safety.
When the rear view is displayed while driving, an icon ( ) appears at the top right side of the infotainment system screen to inform the driver the rear view is being displayed. Do not be confused with the front wide view image.
Surround View Monitor is designed to be used on a flat surface. Therefore, if used on roads with different heights such as curbs and speed bumps, the image in the screen my not look correct.
Always keep the camera lens clean. If the lens is covered with foreign material, it may adversely affect camera performance and Surround View Monitor may not operate normally.
07
7-97
REAR CROss-TRAFFIC COLLIsIOn-AVOIDAnCE AssIsT (RCCA) (IF EQUIppED) Rear Cross-Traffic Collision-Avoidance Assist is designed to help detect vehicles approaching from the left and right side while your vehicle is reversing, and warn the driver that a collision is imminent with a warning message and an audible warning. Also, braking is assisted to help prevent a collision.
OJX1079108
[A] : Rear Cross-Traffic Collision Warning operating range,
[B] : Rear Cross-Traffic Collision-Avoidance Assist operating range
CAUTION The time of warning may vary depending on vehicle speed of the approaching vehicle.
Information In the following text, Rear Cross-Traffic Collision Warning and Rear Cross-Traffic Collision-Avoidance Assist will be referred as Rear Cross-Traffic Safety system.
Detecting sensor
OTM070146
[1] : Rear corner radar
Refer to the picture above for the detailed location of the detecting sensors.
CAUTION For more details on the precautions of the rear corner radar, refer to Blind- Spot Collision-Avoidance Assist (BCA) section in chapter 7.
Driver assistance system
7-98
System settings Setting functions for the system
OTM070194N
Rear Cross-Traffic Safety With the engine on, select Driver AssistanceParkingSafetyRearCross- Traffic Safety from the Settings menu to turn on Rear Cross-Traffic Safety system and deselect to turn off the system.
WARNING When the engine is restarted, Rear Cross-Traffic Safety system will always turn on. However, if Off is selected after the engine is restarted, the driver should always be aware of the surroundings and drive safely.
Information Settings for Rear Cross-Traffic Safety system include Rear Cross-Traffic Collision Warning and Rear Cross-Traffic Collision-Avoidance Assist.
OTM070140N
Warning Timing With the engine on, select Driver AssistanceWarningTimingfromthe Settings menu to change the initial warning activation time for Rear Cross- Traffic Safety system. When the vehicle is first delivered, Warning Timing is set to Normal. If you change the Warning Timing, the warning time of other Driver Assistance systems may change.
07
7-99
OTM070141N
Warning Volume With the engine on, select Driver AssistanceWarningVolumefromthe Settings menu to change the Warning Volume to High, Medium or Low for Rear Cross-Traffic Safety system. If you change the Warning Volume, the Warning Volume of other Driver Assistance systems may change.
CAUTION The setting of the Warning Timing
and Warning Volume applies to all functions of the Rear Collision- Avoidance Assist.
Even though Normal is selected for Warning Timing, if the vehicles from the left and right side approaches at high speed, the initial warning activation time may seem late.
Select Late for Warning Timing when traffic is light and when driving speed is slow.
Information If the engine is restarted, Warning Timing and Warning Volume will maintain the last setting.
System operation System warning and control Rear Cross-Traffic Safety system will warn and control the vehicle depending on collision level: Collision Warning, Emergency Braking and Stopping vehicle and ending brake control.
OHY059034 OTM070168
OTM070076
Collision Warning To warn the driver of an approaching
vehicle from the rear left/right side of your vehicle, the warning light on the side view mirror will blink and a warning will appear on the cluster. At the same time, an audible warning will sound. If Rear View Monitor is operating, a warning will also appear on the infotainment system screen.
Driver assistance system
7-100
The system will operate when all the following conditions are satisfied: - The gear is shifted to R (Reverse) - Vehicle speed is below 5 mph (8
km/h) - The approaching vehicle is within
approximately 82 ft. (25 m) from the left or right side of your vehicle
- The speed of the vehicle approaching from the left and right is above 3 mph (5 km/h)
Information If the operating conditions are satisfied, there will be a warning whenever the vehicle approaches from the left or right side even though your vehicle speed is 0 mph (0 km/h).
OHY059034 OTM070122N
OTM070076
Emergency Braking To warn the driver of an approaching
vehicle from the rear left/right side of your vehicle, the warning light on the side view mirror will blink and, the 'Emergency Braking' warning message will appear on the cluster. At the same time, an audible warning will sound. If Rear View Monitor is operating, a warning will also appear on the infotainment system screen.
07
7-101
The system will operate when all the following conditions are satisfied: - The gear is shifted to R (Reverse) - Vehicle speed is below 5 mph (8
km/h) - The approaching vehicle is within
approximately 5 ft. (1.5 m) from the left or right side of your vehicle
- The speed of the vehicle approaching from the left and right is above 3 mph (5 km/h)
Emergency braking will be assisted to help prevent collision with approaching vehicles from the left and right.
WARNING Brake control will end when: - The approaching vehicle is out of the
detecting range - The approaching vehicle passes
behind your vehicle - The approaching vehicle does not
drive toward your vehicle - The approaching vehicle speed slows
down - The driver depresses the brake pedal
with sufficient power
OTM070169L
Stopping vehicle and ending brake control When the vehicle is stopped due
to emergency braking, the Drive carefully warning message will appear on the cluster.
For your safety, the driver should depress the brake pedal immediately and check the surroundings.
Brake control will end after the vehicle is stopped by emergency braking for approximately 2 seconds.
During emergency braking, braking control by the system will automatically cancel when the driver excessively depresses the brake pedal.
Driver assistance system
7-102
WARNING Take the following precautions when using Rear Cross-Traffic Safety system: For your safety, change the Settings
after parking the vehicle at a safe location.
If any other systems warning message is displayed or audible warning is generated, Rear Cross- Traffic Safety systems warning message may not be displayed and audible warning may not be generated.
You may not hear the warning sound of Rear Cross-Traffic Safety system if the surrounding is noisy.
Rear Cross-Traffic Safety system may not operate if the driver applies the brake pedal to avoid collision.
During Rear Cross-Traffic Safety system operation, the vehicle may stop suddenly injuring passengers and shifting loose objects. Always have the seat belt on and keep loose objects secured.
Even if there is a problem with Rear Cross-Traffic Safety system, the vehicles basic braking performance will operate normally.
Rear Cross-Traffic Safety system does not operate in all situations or cannot avoid all collisions.
During emergency braking, braking control by the system will automatically cancel when the driver excessively depresses the accelerator pedal.
The driver is solely responsible to operate the vehicle in a safe manner. Do not solely depend on Rear Cross-Traffic Safety system. Rather, maintain a safe braking distance, and if necessary, depress the brake pedal to reduce driving speed or to stop the vehicle.
Never deliberately operate Rear Cross-Traffic Safety system on people, animal, objects, etc. It may cause serious injury or death.
CAUTION The brake control may not operate properly depending on the status of ESC (Electronic Stability Control). There will only be a warning when: - The ESC (Electronic Stability Control)
warning light is on - ESC (Electronic Stability Control) is
engaged in a different function
Information If the system assists you with braking,
the driver needs to pay attention as the brake assist will end within 2 seconds. The driver must immediately depress the brake pedal and check vehicle surroundings.
Brake control will end when the driver depresses the brake pedal with sufficient power.
After shifting the gear to R (Reverse), braking control will operate once for left and right vehicle approach.
07
7-103
System malfunction and limitations System malfunction
OTM070125N
When Rear Cross-Traffic Safety system is not working properly, the Check Rear Cross-Traffic Safety system(s) warning message will appear on the cluster, and the system will turn off automatically or the system will be limited. We recommend that the system be inspected by an authorized HYUNDAI dealer.
Type A Type B
OTM070100N OTM070100L
When the side view mirror warning light is not working properly, the Check side view mirror warning light (or Check outside mirror warning icon) warning message will appear on the cluster. We recommend that the system be inspected by an authorized HYUNDAI dealer.
System disabled Type A Type B
OTM070124N OTM070124L
When the rear bumper around the rear- side radar or sensor is covered with foreign material, such as snow or rain, or installing a trailer or carrier, it can reduce the detecting performance and temporarily limit or disable Rear Cross- Traffic Safety system. If this occurs, the Rear Cross-Traffic Safety system disabled. Radar blocked (or Rear cross-traffic safety functions disabled. Radar blocked) warning message will appear on the cluster. The system will operate normally when such foreign material or trailer, etc. is removed. If the system does not operate normally after it is removed, we recommend that the system be inspected by an authorized HYUNDAI dealer.
Driver assistance system
7-104
WARNING Even though the warning message
does not appear on the cluster, Rear Cross-Traffic Safety system may not operate properly.
Rear Cross-Traffic Safety system may not operate properly in an area (for example: open terrain), where any substance are not detected after turning ON the engine.
CAUTION Turn off Rear Cross-Traffic Safety system to install a trailer, carrier, etc., or remove the trailer, carrier, etc. to use Rear Cross-Traffic Safety system.
Limitations of the system Rear Cross-Traffic Safety system may not operate normally, or the system may operate unexpectedly under the following circumstances: Departing from where trees or grass
are overgrown Departing from where roads are wet Speed of the approaching vehicle is
fast or slow
Braking control may not work, drivers attention is required in the following circumstances: The vehicle severely vibrates while
driving over a bumpy road, uneven road or concrete patch
Driving on a slippery surface due to snow, water puddle, ice, etc.
The tire pressure is low or a tire is damaged
The brake is reworked Remote Smart Parking Assist is
operating (if equipped)
CAUTION For more details on the limitations of the rear corner radar, refer to Blind- Spot Collision-Avoidance Assist (BCA) section in chapter 7.
WARNING Driving near a vehicle or structure
OJX1079111
[A] : Structure
Rear Cross-Traffic Safety system may be limited when driving near a vehicle or structure, and may not detect the vehicle approaching from the left or right. If this occurs, the system may not warn the driver or control the brakes when necessary. Always check your surroundings while backing up.
07
7-105
When the vehicle is in a complex parking environment
OJX1079112
Rear Cross-Traffic Safety system may detect vehicles which are parking or pulling out near your vehicle (for example: a vehicle leaving beside your vehicle, a vehicle parking or pulling out in the rear area, a vehicle approaching your vehicle making a turn, etc.). If this occurs, the system may unnecessarily warn the driver and control the brake. Always check your surroundings while backing up.
When the vehicle is parked diagonally
OJX1079113
[A] : Vehicle
Rear Cross-Traffic Safety system may be limited when backing up diagonally, and may not detect the vehicle approaching from the left or right. If this occurs, the system may not warn the driver or control the brakes when necessary. Always check your surroundings while backing up.
When the vehicle is on or near a slope
OTM070229L
Rear Cross-Traffic Safety system may be limited when the vehicle is on a uphill or downhill slope, or near it, and may not detect the vehicle approaching from the left or right. If this occurs, the system may not warn the driver or control the brakes when necessary. Always check your surroundings while backing up.
Driver assistance system
7-106
Pulling into the parking space where there is a structure
OJX1079115
[A] : Structure, [B] :Wall
Rear Cross-Traffic Safety system may detect vehicles passing by in front of you when parking in reverse into a parking space with a wall or structure in the rear or side area. If this occurs, the system may unnecessarily warn the driver and control the brake. Always check your surroundings while backing up.
When the vehicle is parked rearward
OJX1079116
Rear Cross-Traffic Safety system may detect vehicles passing by behind you when parking in reverse into a parking space. If this occurs, the system may unnecessarily warn the driver and control the brake. Always check your surroundings while backing up.
WARNING When you are towing a trailer or
another vehicle, we recommend that Rear Cross-Traffic Safety system is turned off due to safety reasons.
Rear Cross-Traffic Safety system may not operate normally if interfered by strong electromagnetic waves.
Rear Cross-Traffic Safety system may not operate for 3 seconds after the vehicle is started, or the rear corner radars are initialized.
07
7-107
Information This device complies with Part 15 of the FCC rules. Operation is subject to the following three conditions: 1. This device may not cause harmful
interference, and 2. This device must accept any
interference received, including interference that may cause undesired operation.
3. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the device.
Information Radio frequency radiation exposure information: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 8 in. (20 cm) between the radiator (antenna) and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Driver assistance system
7-108
REVERsE pARkIng DIsTAnCE WARnIng (pDW) (IF EQUIppED) Reverse Parking Distance Warning will help warn the driver if an obstacle is detected within a certain distance when the vehicle is moving in reverse at low speeds.
Detecting sensor
OTM070081L
[1] : Rear ultrasonic sensors
Refer to the picture above for the detailed location of the detecting sensors.
System settings Warning Volume SelectDriverAssistanceWarning Volume from the cluster or infotainment system Settings menu to change the Warning Volume to High, Medium, or Low for Reverse Parking Distance Warning.
System operation Operating button
OTM070082L
Parking Distance Warning Off button Press the Parking Distance Warning
Off ( ) button to turn off Reverse Parking Distance Warning. Press the button again to turn on the system.
When Reverse Parking Distance Warning is off (button indicator light on), if you shift the gear to R (Reverse), the system will automatically turn on.
07
7-109
Reverse Parking Distance Warning Reverse Parking Distance Warning
will operate when the gear is in R (Reverse).
Reverse Parking Distance Warning detects a person, animal or object in the rear when the vehicles rearward speed is below 6 mph (10 km/h).
Distance from object
Warning indicator Warning
soundDriving rearward
24~48 in. (60~120 cm)
Buzzer beeps intermittently
12~24 in. (30~60 cm)
Beeps more frequently
within 12 in. (30 cm)
Beeps continuously
The corresponding indicator will illuminate whenever each ultrasonic senor detects a person, animal or object in its sensing range. Also an audible warning will sound.
When more than two objects are detected at the same time, the closest one will be warned with an audible warning.
The shape of the indicator in the illustration may differ from the actual vehicle.
System malfunction and precautions System malfunction After starting the engine, a beep will sound when the gear is shifted to R (Reverse) to indicate the system is operating normally. However, if one or more of the following occurs, first check whether the ultrasonic sensor is damaged or blocked with foreign material. If it still does not work properly, we recommend that the system be inspected by an authorized HYUNDAI dealer. The audible warning does not sound. The buzzer sounds intermittently. The Parking sensor error or blockage
warning message appears on the cluster.
OTM070218L
Driver assistance system
7-110
WARNING Reverse Parking Distance Warning
is a supplemental system. The operation of the system can be affected by several factors (including environmental conditions). It is the responsibility of the driver to always check the rear view before and while parking.
Your new vehicle warranty does not cover any accidents or damage to the vehicle due to the malfunction of Reverse Parking Distance Warning.
Pay close attention when driving near objects, pedestrians, and especially children. Some objects may not be detected by the ultrasonic sensors, due to the objects distance, size or material, all of which can limit the effectiveness of the sensor.
Limitations of the system Reverse Parking Distance Warning
may not operate normally when: - Moisture is frozen to the sensor - Sensor is covered with foreign
material, such as snow or water (The system will operate normally when such foreign material are removed.)
- The weather is extremely hot or cold - The sensor or sensor assembly is
disassembled - The surface of the sensor has been
subjected to a hard impact - The surface of the sensor has been
scratched with a sharp object - The sensors or its surrounding
area is directly sprayed with high pressure washer
Reverse Parking Distance Warning may malfunction when: - Heavy rain or water spray is present - Water flows on the surface of the
sensor - Affected by another vehicles
sensors - The sensor is covered with snow - Driving on uneven road, gravel
roads or bushes - Objects that generates ultrasonic
waves are near the sensor - Installing the license plate
differently from the original location - The vehicle bumper height or
ultrasonic sensor installation has been modified
- Attaching equipments or accessories around the ultrasonic sensors
The following objects may not be detected: - Sharp or slim objects, such as ropes,
chains or small poles. - Objects, which tend to absorb
sensor frequency, such as clothes, spongy material or snow.
- Objects smaller than 40 in. (100 cm) in length and narrower than 6 in. (14 cm) in diameter.
- Pedestrians, animals or objects that are very close to the ultrasonic sensors
Parking Distance Warning Indicators may be displayed differently from the actual detected location when the obstacle is located between the sensors.
Parking Distance Warning indicator may not occur sequentially depending on vehicle speed or obstacle shape.
If Reverse Parking Distance Warning needs repair, we recommend that the system be inspected by an authorized HYUNDAI dealer.
07
7-111
FORWARD/REVERsE pARkIng DIsTAnCE WARnIng (pDW) (IF EQUIppED) Forward/Reverse Parking Distance Warning will help warn the driver if an obstacle is detected within a certain distance when the vehicle is moving forward or in reverse at low speeds.
Detecting sensor
OTM070080
OTM070081
[1] : Front ultrasonic sensors, [2] : Rear ultrasonic sensors
Refer to the picture above for the detailed location of the detecting sensors.
System settings Warning Volume SelectDriverAssistanceWarning Volume from the cluster or infotainment system Settings menu to change the Warning Volume to High, Medium, or Low for Forward/Reverse Parking Distance Warning.
Parking Distance Warning Auto On To use Parking Distance Warning Auto On function, select Driver Assistance ParkingSafetyParkingDistance Warning Auto On from the cluster or infotainment system Settings menu.
System operation Operating button
OTM070082
Parking Safety button Press the Parking Safety ( ) button
to turn on Forward/Reverse Parking Distance Warning. Press the button again to turn off the system.
When Forward/Reverse Parking Distance Warning is off (button indicator light off), if you shift the gear to R (Reverse), the system will automatically turn on.
Driver assistance system
7-112
When Forward/Reverse Parking Distance Warning turns on, the button indicator light will turn on. If vehicle speed is above 12 mph (20 km/h), Forward/Reverse Parking Distance Warning will turn off (button indicator light off).
If equipped with Reverse Parking Collision-Avoidance Assist or Remote Smart Parking Assist, Forward/Reverse Parking Distance Warning will turn off (button indicator light off) when vehicle speed is above 18 mph (30 km/h).
Forward Parking Distance Warning Forward Parking Distance Warning will
operate when one of the condition is satisfied. - The gear is shifted from R (Reverse)
to D (Drive) with Reverse Parking Distance Warning on
- The gear is in D (Drive) and the Parking Safety button indicator light is on
- Parking Distance Warning Auto On is selected from the Settings menu and the gear is in D (Drive)
Forward Parking Distance Warning detects a person, animal or object in front when the vehicles forward speed is below 6 mph (10 km/h).
Forward Parking Distance Warning does not operate when the vehicle's forward speed is above 6 mph (10 km/h) even when the Parking Safety button indicator is on. Forward Parking Distance Warning will operate again when the vehicle's forward speed decreases below 6 mph (10 km/h) while the Parking Safety button indicator is on.
When Parking Distance Warning Auto On is selected, the Parking Safety button indicator light stays on.
When Parking Distance Warning Auto On is deselected, and the vehicles forward speed is above 12 mph (20 km/h), the Parking Safety button indicator will turn off. Although you drive below 6 mph (10 km/h), the system will not turn on.
If equipped with Reverse Parking Collision-Avoidance Assist or Remote Smart Parking Assist, Forward/Reverse Parking Distance Warning will turn off when vehicle speed is above 18 mph (30 km/h).
Distance from object
Warning indicator Warning
soundDriving forward
24~40 in. (60~100 cm)
Buzzer beeps intermittently
12~24 in. (30~60 cm)
Beeps more frequently
within 12 in. (30 cm)
Beeps continuously
The corresponding indicator will illuminate whenever each ultrasonic senor detects a person, animal or object in its sensing range. Also an audible warning will sound.
When more than two objects are detected at the same time, the closest one will be warned with an audible warning.
The shape of the indicator in the illustration may differ from the actual vehicle.
07
7-113
Reverse Parking Distance Warning Reverse Parking Distance Warning
will operate when the gear is in R (Reverse).
Reverse Parking Distance Warning detects a person, animal or object in the rear when the vehicles rearward speed is below 6 mph (10 km/h).
When the vehicles rearward speed is below 6 mph (10 km/h), both the front and rear ultrasonic sensors will detect objects. However, the front ultrasonic sensors can detect a person, animal or object when it is within 24 in. (60 cm) from the sensors.
Distance from object
Warning indicator Warning
soundDriving rearward
24~48 in. (60~120 cm)
Buzzer beeps intermittently
12~24 in. (30~60 cm)
Beeps more frequently
within 12 in. (30 cm)
Beeps continuously
The corresponding indicator will illuminate whenever each ultrasonic senor detects a person, animal or object in its sensing range. Also an audible warning will sound.
When more than two objects are detected at the same time, the closest one will be warned with an audible warning.
The shape of the indicator in the illustration may differ from the actual vehicle.
System malfunction and precautions System malfunction After starting the engine, a beep will sound when the gear is shifted to R (Reverse) to indicate the system is operating normally. However, if one or more of the following occurs, first check whether the ultrasonic sensor is damaged or blocked with foreign material. If it still does not work properly, we recommend that the system be inspected by an authorized HYUNDAI dealer. The audible warning does not sound. The buzzer sounds intermittently. The Parking sensor error or blockage
warning message appears on the cluster.
OTM070172L
Driver assistance system
7-114
WARNING Forward/Reverse Parking Distance
Warning is a supplemental system. The operation of the system can be affected by several factors (including environmental conditions). It is the responsibility of the driver to always check the front and rear views before and while parking.
Your new vehicle warranty does not cover any accidents or damage to the vehicle due to the malfunction of Forward/Reverse Parking Distance Warning.
Pay close attention when driving near objects, pedestrians, and especially children. Some objects may not be detected by the ultrasonic sensors, due to the objects distance, size or material, all of which can limit the effectiveness of the sensor.
Limitations of the system Forward/Reverse Parking Distance
Warning may not operate normally when: - Moisture is frozen to the sensor - Sensor is covered with foreign
material, such as snow or water (The system will operate normally when such foreign material are removed.)
- The weather is extremely hot or cold - The sensor or sensor assembly is
disassembled - The surface of the sensor has been
subjected to a hard impact - The surface of the sensor has been
scratched with a sharp object - The sensors or its surrounding
area is directly sprayed with high pressure washer
Forward/Reverse Parking Distance Warning may malfunction when: - Heavy rain or water spray is present - Water flows on the surface of the
sensor - Affected by another vehicles
sensors - The sensor is covered with snow - Driving on uneven road, gravel
roads or bushes - Objects that generates ultrasonic
waves are near the sensor - Installing the license plate
differently from the original location - The vehicle bumper height or
ultrasonic sensor installation has been modified
- Attaching equipments or accessories around the ultrasonic sensors
The following objects may not be detected: - Sharp or slim objects, such as ropes,
chains or small poles. - Objects, which tend to absorb
sensor frequency, such as clothes, spongy material or snow.
- Objects smaller than 40 in. (100 cm) in length and narrower than 6 in. (14 cm) in diameter.
- Pedestrians, animals or objects that are very close to the ultrasonic sensors
Parking Distance Warning Indicators may be displayed differently from the actual detected location when the obstacle is located between the sensors.
Parking Distance Warning indicator may not occur sequentially depending on vehicle speed or obstacle shape.
If Forward/Reverse Parking Distance Warning needs repair, we recommend that the system be inspected by an authorized HYUNDAI dealer.
07
7-115
REVERsE pARkIng COLLIsIOn-AVOIDAnCE AssIsT (pCA) (IF EQUIppED) Reverse Parking Collision-Avoidance Assist will warn the driver or will assist with braking to help reduce the possibility of collision with a pedestrian or an object when backing up.
Detecting sensor
OTM070167
OTM070081
[1] : Rear view camera, [2] : Rear ultrasonic sensors
Refer to the picture above for the detailed location of the detecting sensors.
System settings Setting functions for the system
OJX1079207L
Parking Safety With the engine on, select or deselect DriverAssistanceParkingSafetyfrom the Settings menu to set whether or not to use each function. - If Rear Active Assist (or Active rear
assist) is selected, the system will warn the driver and assist with braking when a collision with a pedestrian or an object is imminent.
- If Rear Warning Only (or Rear warning only) is selected, the system will warn the driver when a collision with a pedestrian or an object is imminent. Braking will not be assisted.
- If Off is selected, the system will turn off.
Driver assistance system
7-116
OJX1079245L
Warning Timing With the engine on, select Driver AssistanceWarningTimingfromthe Settings menu to change the initial warning activation time for Reverse Parking Collision-Avoidance Assist. When the vehicle is first delivered, Warning Timing is set to Normal. If 'Normal' feels sensitive, change the settings to Late. If you change the Warning Timing, the warning time of other Driver Assistance systems may change.
OJX1079246L
Warning Volume With the engine on, select Driver AssistanceWarningVolumefromthe Settings menu to change the Warning Volume to High, Medium or Low for Reverse Parking Collision-Avoidance Assist. If you change the Warning Volume, the Warning Volume of other Driver Assistance systems may change.
07
7-117
System operation Operating conditions If Rear Active Assist or Rear Warning Only is set from the Settings menu, Reverse Parking Collision-Avoidance Assist will be in the ready status when the following conditions are satisfied: - The liftgate is closed - The gear is shifted to R (Reverse) - Vehicle speed is below 6 mph (10
km/h) - System components such as the rear
view camera and the rear ultrasonic sensors are in normal conditions
When Reverse Parking Collision- Avoidance Assist activates, a line appears behind the vehicle image in the instrument cluster. Reverse Parking Collision-Avoidance Assist operates only once after the gear is shifted to R (Reverse). To reactivate Reverse Parking Collision-Avoidance Assist, shift the gear from another gear to R (Reverse).
OTM070174
Rear Active Assist If the system detects a risk of collision
with a pedestrian or an object, the system will warn the driver with an audible warning and warning message on the cluster. When Rear View Monitor is operating, a warning will appear on the infotainment system screen.
If the system detects an imminent collision with a pedestrian or an object behind the vehicle, the system will assist you with braking. The driver needs to pay attention as the brake assist will end within 2 seconds. The driver must immediately depress the brake pedal and check vehicle surroundings.
Brake control will end when: - The gear is shifted to P (Park) or D
(Drive). - The driver depresses the brake
pedal with sufficient power - Braking assist has last for
approximately 2 seconds The warning will turn off when:
- The driver shifts the gear to P (Park), N (Neutral), or D (Drive)
The brake control may not operate properly depending on the status of ESC (Electronic Stability Control). There will only be a warning when: - The ESC (Electronic Stability
Control) warning light is on - ESC (Electronic Stability Control) is
engaged in a different function
Driver assistance system
7-118
Rear Warning Only If the system detects a risk of collision
with a pedestrian or an object, the system will warn the driver with an audible warning and warning message on the cluster. When Rear View Monitor is operating, a warning will appear on the infotainment system screen.
If Rear Warning Only is selected, braking will not be assisted.
The warning will turn off when the gear is shifted to P (Park), N (Neutral) or D (Drive).
System malfunction and limitations System malfunction
OTM070173L
When Reverse Parking Collision- Avoidance Assist or other related systems are not working properly, the Check Parking Safety system warning message will appear on the cluster, and the system will turn off automatically. We recommend that the system be inspected by an authorized HYUNDAI dealer.
System disabled
OTM070070
The rear view camera is used as a detecting sensor to detect pedestrians. If the camera lens is covered with foreign material, such as snow or rain, it may adversely affect camera performance and Reverse Parking Collision-Avoidance Assist may not operate normally. Always keep the camera lens clean.
OTM070079
The rear ultrasonic sensors are located inside the rear bumper to detect objects in the rear area. If the sensors are covered with foreign material, such as snow or rain, it may adversely affect sensor performance and Reverse Parking Collision-Avoidance Assist may not operate normally. Always keep the rear bumper clean.
07
7-119
Rear view camera Rear ultrasonic sensor
OTM070219L OTM070176L
The Rear camera error or blockage or Parking sensor error or blockage warning message will appear on the cluster if the following situations occur: - The rear view camera is covered with
foreign material, such as snow or rain, etc.
- There is inclement weather, such as heavy snow, heavy rain, etc.
If this occurs, Reverse Parking Collision- Avoidance Assist may turn off or may not operate properly. Check whether the rear view camera and rear ultrasonic sensors are clean.
Limitations of the system Reverse Parking Collision-Avoidance Assist may not assist braking or warn the driver even if there are pedestrians or objects under the following circumstances: Any non-factory equipment or
accessory is installed Your vehicle is unstable due to an
accident or other causes Bumper height or rear ultrasonic
sensor installation has been modified Rear view camera or rear ultrasonic
sensor(s) is damaged Rear view camera or the rear
ultrasonic sensor(s) is stained with foreign material, such as snow, dirt, etc.
Rear view camera is obscured by a light source or by inclement weather, such as heavy rain, fog, snow, etc.
The surrounding is very bright or very dark
Outside temperature is very high or very low
The wind is either strong (above 12 mph (20 km/h)) or blowing perpendicular to the rear bumper
Objects generating excessive noise, such as vehicle horns, loud motorcycle engines or truck air brakes, are near your vehicle
An ultrasonic sensor with similar frequency is near your vehicle
There is ground height difference between the vehicle and the pedestrian
The image of the pedestrian in the rear view camera is indistinguishable from the background
Driver assistance system
7-120
The pedestrian is near the rear edge of the vehicle
The pedestrian is not standing upright The pedestrian is either very short or
very tall for the system to detect The pedestrian or cyclist is wearing
clothing that easily blends into the background, making it difficult to detect
The pedestrian is wearing clothing that does not reflect ultrasonic waves well
Size, thickness, height, or shape of the object does not reflect ultrasonic waves well (e.g., pole, bush, curbs, carts, edge of a wall, etc.)
The pedestrian or the object is moving The pedestrian or the object is very
close to the rear of the vehicle A wall is behind the pedestrian or the
object The object is not located at the rear
center of your vehicle The object is not parallel to the rear
bumper The road is slippery or inclined The driver backs up the vehicle
immediately after shifting to R (Reverse)
The driver accelerates or circles the vehicle
Reverse Parking Collision-Avoidance Assist may unnecessarily warn the driver or assist with braking even if there are no pedestrians or objects under the following circumstances: Any non-factory equipment or
accessory is installed Your vehicle is unstable due to an
accident or other causes Bumper height or rear ultrasonic
sensor installation has been modified Your vehicle height is low or high
due to heavy loads, abnormal tire pressure, etc.
Rear view camera or the rear ultrasonic sensor(s) is stained with foreign material, such as snow, dirt, etc.
The pattern on the road is mistaken for a pedestrian
There is shadow or light reflecting on the ground
Pedestrians or objects are around the path of the vehicle
Objects generating excessive noise, such as vehicle horns, loud motorcycle engines or truck air brakes, are near your vehicle
Your vehicle is backing towards a narrow passage or parking space
Your vehicle is backing towards an uneven road surface, such as an unpaved road, gravel, bump, gradient, etc.
A trailer or carrier is installed on the rear of your vehicle
An ultrasonic sensor with similar frequency is near your vehicle
07
7-121
WARNING Take the following precautions when using Reverse Parking Collision- Avoidance Assist: Always pay extreme caution while
driving. The driver is responsible for controlling the brake for safe driving.
Always pay attention to road and traffic conditions while driving, whether or not there is a warning.
Always look around your vehicle to make sure there are no pedestrians or objects before moving the vehicle.
The performance of Reverse Parking Collision-Avoidance Assist may vary under certain conditions. If vehicle speed is above 2 mph (4 km/h), the system will provide collision avoidance assist only when pedestrians are detected. Always look around and pay attention when backing up your vehicle.
Some objects may not be detected by the rear ultrasonic sensors due to the objects distance, size or material, all of which can limit the effectiveness of the sensor.
Reverse Parking Collision-Avoidance Assist may not operate properly or may operate unnecessarily depending on the road conditions and the surroundings.
Do not solely rely on the system. Doing so may lead to vehicle damage or injuries.
CAUTION Noise may be heard when sudden
braking occurs to avoid a collision. If any other warning sound such
as the seat belt warning chime is already generated, Reverse Parking Collision-Avoidance Assist warning may not sound.
The system may not work properly if the bumper has been damaged, replaced or repaired.
Reverse Parking Collision-Avoidance Assist may not operate normally if interfered by strong electromagnetic waves.
Playing the vehicle audio system at high volume may prevent passengers from hearing Reverse Parking Collision-Avoidance Assist warning sounds.
Turn off Reverse Parking Collision- Avoidance Assist when towing a trailer. If towing and moving in reverse, Reverse Parking Collision- Avoidance Assist will activate as it detects the trailer.
Driver assistance system
7-122
CAUTION Take the following precautions to maintain optimal performance of the detecting sensors: Always keep the rear view camera
and rear ultrasonic sensors clean. Do not use any cleanser containing
acid or alkaline detergents when cleaning the rear view camera lens. Use only a mild soap or neutral detergent, and rinse thoroughly with water.
Do not spray the rear view camera or the rear ultrasonic sensors or their surrounding area directly with a high pressure washer. It may cause the rear view camera or the rear ultrasonic sensors to malfunction.
Do not apply objects, such as a bumper sticker or a bumper guard, near the rear view camera or rear ultrasonic sensors or apply paint to the bumper. Doing so may adversely affect the performance of the system.
Never disassemble or strike the rear view camera or the rear ultrasonic sensors components.
Do not strike or pry the rear view camera or the rear ultrasonic sensors. The system may not operate properly if the rear view camera or the rear ultrasonic sensor(s) is forcibly moved out of proper alignment. We recommend that the vehicle be inspected by an authorized HYUNDAI dealer.
Information Reverse Parking Collision-Avoidance Assist can detect a pedestrian or an object when: A pedestrian is standing behind the
vehicle A large obstacle, such as a vehicle,
is parked in the rear center of your vehicle
07
7-123
REmOTE smART pARkIng AssIsT (RspA) (IF EQUIppED) Remote Smart Parking Assist uses vehicle sensors to help the driver park and exit parking spaces remotely from outside the vehicle by controlling the steering wheel, vehicle speed and gearshifts.
Function Description
Remote Forward/ Backward
Remotely moving forward or in reverse
OJX1079037
Remote Forward/Backward function helps the driver move the vehicle forward or in reverse from outside the vehicle using the smart key.
When Remote Smart Parking Assist operates, Surround View Monitor and Parking Distance Warning will also operate. For more details, refer to Surround View Monitor (SVM) and Parking Distance Warning (PDW) sections in chapter 7.
Detecting sensor
OTM070179
OTM070180
[1] : Front ultrasonic sensors, [2] : Front side ultrasonic sensors, [3] : Rear side ultrasonic sensors, [4] : Rear ultrasonic sensors
Refer to the picture above for the detailed location of the detecting sensors.
Driver assistance system
7-124
CAUTION Take the following precautions to maintain optimal performance of the detecting sensors: Never disassemble the detecting
sensor or sensor assembly, or apply any impact on it.
If the detecting sensor have been replaced or repaired, we recommend that you have your vehicle inspected by an authorized HYUNDAI dealer.
Remote Smart Parking Assist may malfunction if the vehicle bumper height or ultrasonic sensor installation has been modified or damaged. Any non-factory installed equipment or accessories may also interfere with the sensor performance.
When the ultrasonic sensor is frozen or stained with snow, dirt, or water, the sensor may be not operate until the stains are removed using a soft cloth.
Do not push, scratch or strike the ultrasonic sensor. Sensor damage could occur.
Do not spray the ultrasonic sensors or its surrounding area directly with a high pressure washer.
System settings Settings functions for the system
OJX1079246L
Warning Volume With the engine on, select Driver AssistanceWarningVolumefromthe Settings menu to change the Warning Volume to High, Medium or Low for Remote Smart Parking Assist. If you change the Warning Volume, the Warning Volume of other Driver Assistance systems may change.
07
7-125
System operation Remote Smart Parking Assist button
Parking/View button Smart key
OTM070183 OTM070177
Location Name Symbol Description
Inside vehicle
Parking/View button
Press and hold the Parking/View button to turn on Remote Smart Parking Assist. Also, Forward/Reverse Parking Distance warning will automatically turn on.
Parking Safety button
Press the Parking Safety button while Remote Smart Parking Assist is operating to end system operation.
Smart key
Remote Start button
Press the Remote Start button after the door is locked with the engine off to start the engine remotely.
Press the Remote Start button while Remote Forward/Backward function is operating to end function operation.
Forward button When using the Remote Forward/Backward
function, the vehicle moves in the direction of the button while the button is pressed.Backward
button
Driver assistance system
7-126
Remote Forward/Backward Operating order Remote Forward/Backward operates in the following order: 1. Getting ready to remotely move
forward and in reverse 2. Remotely moving forward and in
reverse
1. Getting ready to remotely move forward and in reverse There are two ways to operate Remote Forward/Backward function.
OTM070178L
Method (1) Using the function with engine off (1) Within a certain range from the
vehicle press the door lock ( ) button on the smart key and lock all doors.
(2) Press and hold the Remote Start button ( ) within 4 seconds until the engine starts.
For more details on remotely starting the engine, refer to Remote Start section in chapter 6.
Information If the vehicle is remotely started that has been parked in cold weather for a long time, the operation of Remote Forward/ Backward function may be delayed depending on the engine condition.
OTM070130
OTM070223L
Method (2) Using the function with engine on (1) Park the vehicle in front of the
space where you want to use Remote Forward/Backward function, and shift the gear to P (Park).
(2) Press and hold the Parking/View ( ) button to turn on Smart Parking Assist. A message Under Remote Control will appear on the infotainment system screen.
(3) Get out of the vehicle with the smart key and close all doors.
'Agree' must be selected on the infotainment system screen and the infotainment system has to operate properly to use Remote Forward/ Backward function.
07
7-127
2. Remotely moving forward and in reverse
OTM070084L
(1) Press and hold one of the Forward ( ) or Reverse ( ) button on the smart key. Remote Smart Parking Assist will automatically control the steering wheel, vehicle speed and gearshift. The vehicle will move in the direction of the button pressed.
(2) While Remote Forward/Backward function is operating, if the you do not hold down the Forward ( ) or Reverse ( ) button, the vehicle will stop and system control will pause. The function will start operating again when the button is pressed and held again.
(3) When the vehicle reaches the target location, release the smart key Forward or Backward button.
(4) When the driver gets in the vehicle with the smart key, a message will appear informing the driver Remote Forward/Backward function is complete on the infotainment system screen and the engine will remain on. In addition, when the Remote Start ( ) button is pressed on the smart key from outside the vehicle, a message will appear informing the driver Remote Entry/Exit Parking function is complete and the engine will turn off.
Check that all smart keys are outside the vehicle when using Remote Forward/Backward function.
Remote Forward/Backward function will operate only when the smart key is within 13 ft. (4 m) from the vehicle. If there is no vehicle movement even when the Forward or Reverse button is pressed on the smart key, check the distance to the vehicle and press the button again.
The detecting range of the smart key may vary depending on the surroundings that are affected by radio waves such as transmission tower, broadcast station, etc.
When remotely moving forward using method (1), it is recognized as an exit situation, and the vehicle moves 13 ft. (4 m) to check for pedestrians, animals or objects around the vehicle. After confirmation, the steering wheel is controlled according to the condition ahead.
Driver assistance system
7-128
When remotely moving forward using method (2), it is recognized as a parking situation, and will immediately control the steering wheel according to the condition ahead to assist with entering the parking space and aligning the vehicle. However, performance may reduce depending on the pedestrians, animals, shape of objects, location, etc. around the vehicle.
For moving remotely in reverse, both method (1) and (2) aligns the steering wheel first, and then will only move the vehicle straight.
When remotely moving forward or in reverse is completed, the vehicle will automatically shift to P (Park) and engage EPB (Electronic Parking Brake).
CAUTION When using Remote Remote
Forward/Backward function, make sure that all passengers have gotten out of the vehicle.
If the vehicles battery is discharged or Remote Smart Parking Assist malfunctions when parked in a narrow parking space, Remote Forward/Backward function will not operate. Always park your vehicle in a space wide enough for you to get in or out of your vehicle.
Please note that depending on the parking space, you may not be able to exit from the space you have entered by using Remote Forward/ Backward function.
After parking, the surrounding may change due to the movement of surrounding vehicles. If this occurs, Remote Forward/Backward function may not operate.
Before leaving the vehicle, close windows and sunroofs, and make sure the engine is off before locking the doors.
07
7-129
System operation status
Operation status Smart key LED
Hazard warning
light
Under control
Green LED continuously blinks
-
Pause Red LED continuously blinks
Blinks
Off
Red LED illuminates for 4 seconds and then turns off
Blinks 3 times and turns off
Complete
Green LED illuminates for 4 seconds and then turns off
Blinks 1 time and turns off
Operation status by the hazard warning light may not be applicable based on the regulation of your country.
If the smart key is not within the operating range from the vehicle (approximately 13 ft. (4 m)), the smart key LED will not illuminate or blink. Use the smart key within the operating range.
How to turn off Remote Forward/ Backward function while operating Press the Parking/View ( ) button
while the infotainment system screen guides the driver using method 2.
Shift the gear except to P (Park) while the infotainment system screen guides the driver using method 2.
Press the Parking Safety ( ) button or select Cancel on the infotainment system screen.
Press the Remote Start ( ) button on the smart key while the vehicle is being controlled by RRemote Forward/Backward function. Remote Forward/Backward function will turn off. At this time, the engine will turn off.
Get on the vehicle with the smart key. Remote Forward/Backward function will turn off. At this time, the engine will remain on.
The function will pause in the following conditions when: There is a pedestrian, animal or object
in the direction the vehicle is moving The door or liftgate is open The Forward ( ) or Reverse ( )
button is not continuously pressed Simultaneously pressing multiple
buttons on a smart key The smart key is not operated within
13 ft. (4 m) from the vehicle Button of another smart key is pressed
in addition to the operating smart key Blind-Spot Collision-Avoidance
Assist or Rear Cross-Traffic Collision- Avoidance Assist operates while the vehicle is being controlled in the reverse direction.
Driver assistance system
7-130
The vehicle moves 22 ft. (7 m) while the smart key is pressed with Remote Forward/Backward function (maximum travel distance per button press)
When Remote Forward/Backward function is paused, the vehicle will stop. If the condition that made the function to pause disappears, the function may operate again.
The function will cancel in the following conditions when: The steering wheel is steered The gear is shifted while the vehicle is
moving Operating EPB while the vehicle is
moving The engine hood is open The brake pedal or accelerator pedal
is depressed when all the doors are closed
The smart key is outside the vehicle when the brake pedal is depressed while the driver's door is open
Rapid acceleration occurs Vehicle skid occurs The wheel is stuck by an obstacle and
cannot move There are pedestrians, animals or
objects at the front and rear of the vehicle at the same time
Approximately 3 minutes and 50 seconds have past after Remote Forward/Backward function has started to operate
The slope of the road exceeds the operational range
The function is paused for more than 1 minute
The total travel distance of the vehicle has exceeded 45 ft. (14 m) after Remote Entry/Exit Parking function operation
The steering wheel, gearshift, braking, and drive controls are not working normally
There is a problem with the smart key or the smart key battery is low
ABS, TCS or ESC system operates due to slippery road conditions
The alarm of the Theft Alarm System sounds
When Remote Forward/Backward function is canceled, the vehicle will automatically stop, shift the gear to P (Park) and engage EPB (Electronic Parking Brake).
07
7-131
System malfunction and limitations System malfunction
OTM070222L
System check When Remote Smart Parking Assist is not working properly, the Check Parking Assist warning message will appear on the infotainment system screen. If the message appears, stop using the system, and we recommend that the system be inspected by an authorized HYUNDAI dealer.
OJX1079200L
System canceled When Remote Parking Assist is operating, the system can be canceled, and the Parking Assist Canceled warning message may appear regardless of the parking order. Other messages may appear depending on the situations. Follow the instructions provided on the infotainment system screen while parking your vehicle with Remote Parking Assist. Always look around and pay attention when using the system.
Driver assistance system
7-132
OTM070221L
System standby When Parking Assist Conditions Not Met message appears, when Parking/ View ( ) button has been pressed and held, Remote Smart Parking Assist is in standby. After a while, press and hold the Parking/View ( ) button again to see if the system works. The message appears even when the smart key's battery is low. Check the smart key battery level.
Limitations of the system In the following circumstances, system performance to park or exit the vehicle may be limited, there may be a risk of collision, or Remote Smart Parking Assist may turn off. Park or exit the vehicle manually if necessary. An object is attached to the steering
wheel The vehicle is installed with a snow
chain, spare tire or different size wheel
Tire pressure is lower or higher than the standard tire pressure
Your vehicle is loaded with cargo longer or wider than your vehicle or a trailer is connected to your vehicle
There is a problem with the wheel alignment
Your vehicle is leaned severely to one side
Your vehicle is equipped with a trailer hitch
The license plate is installed differently from the original location
There is a person, animal or object above or below the ultrasonic sensor when Remote Smart Parking Assist is activated
The parking space is curved or diagonal
There is an obstacle such as a person, animal or object (trash can, bicycle, motorcycle, shopping cart, narrow pillar etc.) near the parking space
07
7-133
There is a circular pillar or narrow pillar, or a pillar surrounded by objects such as fire extinguisher, etc. near the parking space
The road surface is bumpy (curbstone, speed bump, etc.)
The road is slippery The parking space is near a vehicle
with higher ground clearance or big, such as a truck, etc.
The parking space is Inclined There is heavy wind Operating the system on uneven
roads, gravel roads, bushes, etc. The performance of the ultrasonic
sensor is affected by extremely hot or cold weather
The ultrasonic sensor is covered with snow or water
An object that generates ultrasonic waves is nearby
A wireless device with a transmission function operates near the ultrasonic sensors
Your vehicle is affected by another vehicles Parking Distance Warning
The sensor is mounted or positioned incorrectly by an impact to the bumper
When the ultrasonic sensor cannot detect the following objects: - Sharp or slim objects, such as ropes,
chains or small poles - Objects smaller than 40 in. (100 cm)
in length and narrower than 6 in. (14 cm) in diameter
- Objects which tend to absorb sensor frequency, such as clothes, spongy material or snow
Remote Smart Parking Assist may not operate normally under the following circumstances: Parking on inclines
OTM070132
Park manually when parking on inclines.
Parking on uneven road
OTM070134
Remote Smart Parking Assist may cancel when the vehicle slips, or the vehicle cannot move due to road conditions such as pebbles or fragmented stones.
Driver assistance system
7-134
Parking behind a truck
OTM070137
Do not use Remote Smart Parking Assist around vehicles with higher ground clearance, such as a bus, truck, etc. It may lead to an accident.
Parking near a pillar
OTM070135
Remote Smart Parking Assist performance may reduce when there is a pillar or pillar surrounded by objects such as a fire extinguisher near the parking space.
Parking in a parking space with a vehicle on one side only
OJX1079049
If Remote Smart Parking Assist is used, when parking in a parking space with a vehicle only on one side, your vehicle may cross the parking line to avoid the parked vehicle.
Parking diagonal
OTM070133
Remote Smart Parking Assist does not provide diagonal parking. Even if your vehicle was able to enter the parking space, do not use the system because the system cannot operate normally.
07
7-135
Parking in snow
OTM070131
Snow may interfere with sensor operation, or Remote Smart Parking Assist may cancel if the road is slippery while parking.
WARNING Take the following precautions when using Remote Smart Parking Assist: The driver is responsible for safe
parking and exit when using Remote Smart Parking Assist. Make sure there are no pedestrians, animals or objects around the vehicle when using the system.
When using Remote Smart Parking Assist, stay out of the way in the direction the vehicle moves for your safety.
Always check surroundings when using Remote Smart Parking Assist. You may collide with pedestrians, animals, or objects if they are near the sensor or are in the sensors blind spot area.
A collision may occur if a pedestrian, animal, or object suddenly appears while Remote Smart Parking Assist is operating.
Do not use Remote Smart Parking Assist when under the influence of alcohol.
Do not let children or other people to use the smart key.
If Remote Smart Parking Assist is used continuously for a long period, it may adversely affect system performance.
Remote Smart Parking Assist may not operate normally if the vehicle needs wheel alignment adjustment such as when the vehicle tilts to one side. We recommend that the vehicle be checked by an authorized HYUNDAI dealer.
Noise may be heard when braking occurs by Remote Smart Parking Assist or when the brake pedal is depressed by the driver.
Remote Smart Parking Assist may suddenly apply the brake to avoid collision.
Use the system only in a parking space that is large enough for the vehicle to move safely.
NOTICE If the 3rd stage warning (continuous
beep) of the Forward/Reverse Parking Distance Warning sounds while Remote Smart Parking Assist is operating, it means the obstacle detected is close to your vehicle. At this time, Remote Smart Parking Assist will temporarily stop operating. Make sure there are no pedestrians, animals, or objects around your vehicle.
Depending on brake operation, the stop lights may come on while the vehicle is moving.
Driver assistance system
7-136
DECLARATION OF CONFORMITY The radio frequency components (Rear Corner Radar) complies: - For USA
OANATEL053
- For Canada
OANATEL054
8
Emergency situations
Hazard warning flasher..................................................................................... 8-2 In case of an emergency while driving ............................................................ 8-2
If the engine stalls while driving .................................................................................8-2 If the engine stalls at a crossroad or crossing ............................................................8-2 If you have a flat tire while driving ..............................................................................8-3
If the engine will not start ................................................................................ 8-3 Jump starting ....................................................................................................8-4 If the engine overheats ......................................................................................8-7 Tire Pressure Monitoring System (TPMS) ........................................................8-9
Check tire pressure ..................................................................................................... 8-9 Tire pressure monitoring system ............................................................................... 8-10 Low tire pressure warning light .................................................................................. 8-11 Low tire pressure position and tire pressure telltale ................................................. 8-11 TPMS malfunction indicator ...................................................................................... 8-12 Changing a tire with TPMS ........................................................................................ 8-12
If you have a flat tire (with spare tire) .............................................................8-14 Jack and tools............................................................................................................. 8-14 Removing and storing the spare tire......................................................................... 8-14 Changing tires ............................................................................................................ 8-16 Jack label .................................................................................................................... 8-21
If you have a flat tire (with Tire Mobility Kit) ................................................. 8-22 Introduction ................................................................................................................8-22 Notes on the safe use of the Tire Mobility Kit ..........................................................8-23 Components of the Tire Mobility Kit .........................................................................8-24 Using the Tire Mobility Kit .........................................................................................8-25 Checking the tire inflation pressure ..........................................................................8-28
Towing .............................................................................................................8-30 Towing service ........................................................................................................... 8-30
Emergency commodity .................................................................................. 8-32 Fire extinguisher .........................................................................................................8-32 First aid kit ..................................................................................................................8-32 Triangle reflector ........................................................................................................8-32 Tire pressure gauge ....................................................................................................8-32
8. Emergency situations
Emergency situations
8-2
HAzARD WARNING FLASHER
OTM080001
The hazard warning flasher serves as a warning to other drivers to exercise extreme caution when approaching, overtaking, or passing your vehicle. It should be used whenever emergency repairs are being made or when the vehicle is stopped near the edge of a roadway. To turn the hazard warning flasher on or off, press the hazard warning flasher button with the Engine Start/Stop button in any position. The hazard warning flasher button is located in the center fascia panel. All turn signal lights will flash simultaneously. The hazard warning flasher operates
regardless of whether your vehicle is running or not.
The turn signals do not work when the hazard flasher is on.
IN CASE OF AN EMERGENCY WHILE DRIVING
If the engine stalls while driving Reduce your speed gradually, keeping
a straight line. Move cautiously off the road to a safe place.
Turn on your hazard warning flasher. Try to start the engine again. If your
vehicle will not start, we recommend that you contact an authorized HYUNDAI dealer or seek other qualified assistance.
If the engine stalls at a crossroad or crossing If the engine stalls at a crossroads or crossing, if safe to do so, shift the gear to N (Neutral) and then push the vehicle to a safe location.
08
8-3
If you have a flat tire while driving If a tire goes flat while you are driving: Take your foot off the accelerator
pedal and let the vehicle slow down while driving straight ahead. Do not apply the brakes immediately or attempt to pull off the road as this may cause loss of vehicle control resulting in an accident. When the vehicle has slowed to such a speed that it is safe to do so, brake carefully and pull off the road. Drive off the road as far as possible and park on firm, level ground. If you are on a divided highway, do not park in the median area between the two traffic lanes.
When the vehicle is stopped, press the hazard warning flasher button, shift the gear to P (Park), apply the parking brake, and press the Engine Start/Stop button to the OFF position.
Have all passengers get out of the vehicle. Be sure they all get out on the side of the vehicle that is away from traffic.
When changing a flat tire, follow the instructions provided later in this chapter.
IF THE ENGINE WILL NOT START Be sure to shift the gear to N (Neutral)
or P (Park). The engine starts only when the gear is in N (Neutral) or P (Park).
Turn on the interior light. If the light dims or goes out when you operate the starter, the battery is drained. See instructions for Jump Starting provided in this chapter.
Check the fuel level and add fuel if necessary.
If the vehicle still does not start, we recommend that you call an authorized HYUNDAI dealer for assistance.
NOTICE Push or pull starting the vehicle may cause the catalytic converter to overload which can lead to damage to the emission control system.
Emergency situations
8-4
Jump starting can be dangerous if done incorrectly. Follow the jump starting procedure in this section to avoid serious injury or damage to your vehicle. If in doubt about how to properly jump start your vehicle, we strongly recommend that you have a service technician or towing service do it for you.
WARNING To prevent SERIOUS INJURY or DEATH to you or bystanders, always follow these precautions when working near or handling the battery:
Always read and follow instructions carefully when handling a battery.
Wear eye protection designed to protect the eyes from acid splashes.
Keep all flames, sparks, or smoking materials away from the battery.
Hydrogen is always present in battery cells, is highly combustible, and may explode if ignited. Keep batteries out of reach of children.
Batteries contain sulfuric acid which is highly corrosive. Do not allow acid to contact your eyes, skin or clothing.
If acid gets into your eyes, flush your eyes with clean water for at least 15 minutes and get immediate medical attention. If acid gets on your skin, thoroughly wash the area. If you feel pain or a burning sensation, get medical attention immediately. When lifting a plastic-cased battery,
excessive pressure on the case may cause battery acid to leak. Lift with a battery carrier or with your hands on opposite corners.
Do not attempt to jump start your vehicle if your battery is frozen.
NEVER attempt to recharge the battery when the vehicles battery cables are connected to the battery.
The electrical ignition system works with high voltage. NEVER touch these components with the engine running or when the Engine Start/Stop button is in the ON position.
JUMP STARTING
08
8-5
Jump starting procedure
Information Your vehicle has a battery in the luggage compartment, but when you jump start your vehicle, use the jumper terminal in the engine compartment.
1. Position the vehicles close enough that the jumper cables will reach, but do not allow the vehicles to touch.
2. Avoid fans or any moving parts in the engine compartment at all times, even when the vehicles are turned off.
3. Turn off all electrical devices such as radios, lights, air conditioning, etc. Put the vehicles in P (Park) and set the parking brake. Turn both vehicles OFF.
4. Open the engine hood.
OTM080021
5. Connect the jumper cables in the exact sequence shown in the illustration. First connect one jumper cable to the red, positive (+) jumper terminal of your vehicle (1).
6. Connect the other end of the jumper cable to the red, positive (+) battery/ jumper terminal of the assisting vehicle (2).
7. Connect the second jumper cable to the black, negative (-) battery/ chassis ground of the assisting vehicle (3).
8. Connect the other end of the second jumper cable to the black, negative (-) chassis ground of your vehicle (4). Do not allow the jumper cables to contact anything except the correct battery or jumper terminals or the correct ground. Do not lean over the battery when making connections.
Emergency situations
8-6
9. Start the engine of the assisting vehicle and let it run at approximately 2,000 rpm for a few minutes. Then start your vehicle.
10. Keep your vehicle operating for at least 30 minutes at idle or driving to assure your battery receives enough charge to be able to start on its own after the vehicle is shut off. A complete dead battery may require as long as 60 minutes runtime to fully recharge it. If vehicle is run for less, the battery may not restart.
If your vehicle will not start after a few attempts, it probably requires servicing. In this event please seek qualified assistance. If the cause of your battery discharging is not apparent, we recommend that you have your vehicle checked by an authorized HYUNDAI dealer.
Disconnect the jumper cables in the exact reverse order you connected them: 1. Disconnect the jumper cable from the
black, negative (-) chassis ground of your vehicle (4).
2. Disconnect the other end of the jumper cable from the black, negative (-) battery/chassis ground of the assisting vehicle (3).
3. Disconnect the second jumper cable from the red, positive (+) battery/ jumper terminal of the assisting vehicle (2).
4. Disconnect the other end of the jumper cable from the red, positive (+) jumper terminal of your vehicle (1).
Information An inappropriately disposed battery can be harmful to the environment and human health. Dispose of the battery according to your local law(s) or regulations.
NOTICE To prevent damage to your vehicle: Only use a 12-volt power supply
(battery or jumper system) to jump start your vehicle.
Do not attempt to jump start your vehicle by push-starting.
08
8-7
If your temperature gauge indicates overheating, you experience a loss of power, or hear loud pinging or knocking, the engine may be overheating. If this happens, you should: 1. Pull off the road and stop as soon as it
is safe to do so. 2. Shift the gear to P (Park) and set the
parking brake. If the air conditioning is ON, turn it OFF.
3. If engine coolant is running out under the vehicle or steam is coming out from the hood, stop the engine. Do not open the hood until the coolant has stopped running or the steaming has stopped. If there is no visible loss of engine coolant and no steam, leave the engine running and check to be sure the engine cooling fan is operating. If the fan is not running, turn the engine off.
WARNING While the engine is running, keep hands, clothing and tools away from the moving parts such as the cooling fan and drive belt to prevent serious injury.
4. Check for coolant leaking from the radiator, hoses or under the vehicle. (If the air conditioning had been in use, it is normal for cold water to be draining from it when you stop.)
5. If engine coolant is leaking out, stop the engine immediately and call the nearest authorized HYUNDAI dealer for assistance.
WARNING Never remove the engine coolant cap and/or water- cooled intercooler coolant cap or the drain plug while the engine and radiator are hot.
Hot coolant and steam may blow out under pressure, causing serious injury. Turn the engine off and wait until the engine cools down. Use extreme care when removing the coolant cap. Wrap a thick towel around it, and turn it counterclockwise slowly to the first stop. Step back while the pressure is released from the cooling system. When you are sure all the pressure has been released, press down on the cap, using a thick towel, and continue turning counterclockwise to remove it.
IF THE ENGINE OVERHEATS
Emergency situations
8-8
6. If you cannot find the cause of the overheating, wait until the engine temperature has returned to normal. Then, if coolant has been lost, carefully add coolant to the reservoir to bring the fluid level in the reservoir up to the halfway mark.
7. Proceed with caution, keeping alert for further signs of overheating. If overheating happens again, we recommend that you call an authorized HYUNDAI dealer for assistance.
CAUTION Serious loss of coolant indicates a
leak in the cooling system and we recommend the system be checked by an authorized HYUNDAI dealer.
When the engine overheats from low engine coolant, suddenly adding engine coolant may cause cracks in the engine. To prevent damage, add engine coolant slowly in small quantities. It may require several refilling cycles to properly fill the engine cooling system. If necessary, an authorized HYUNDAI dealer should be consulted to perform this task.
08
8-9
OTM080002
OTM080027L
(1) Low Tire Pressure Telltale/TPMS Malfunction Indicator
(2) Low Tire Pressure Position Telltale and Tire Pressure Telltale (Shown on the LCD display)
Check tire pressure
OTM080005L
You can check the tire pressure in the Warning mode on the cluster. Refer to the LCD Display Modes in chapter 4.
Tire pressure is displayed after a few minutes of driving after initial engine start up.
If tire pressure is not displayed when the vehicle is stopped, Drive to display message will appear. After driving, check the tire pressure.
The displayed tire pressure values may differ from those measured with a tire pressure gauge.
You can change the tire pressure unit in the User Settings mode on the instrument cluster. - psi, kpa, bar (Refer to LCD Modes
in chapter 4).
TIRE pREssURE mOnITORIng sYsTEm (Tpms)
Emergency situations
8-10
Tire pressure monitoring system
WARNING Over-inflation or under-inflation can reduce tire life, adversely affect vehicle handling, and lead to sudden tire failure that may cause loss of vehicle control resulting in an accident.
Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label. (If your vehicle has tires of a different size than the size indicated on the vehicle placard or tire inflation pressure label, you should determine the proper tire inflation pressure for those tires.) As an added safety feature, your vehicle has been equipped with a tire pressure monitoring system (TPMS) that illuminates a low tire pressure telltale when one or more of your tires is significantly under-inflated. Accordingly, when the low tire pressure telltale illuminates, you should stop and check your tires as soon as possible, and inflate them to the proper pressure. Driving on a significantly under-inflated tire causes the tire to overheat and can lead to tire failure. Under-inflation also reduces fuel efficiency and tire tread life, and may affect the vehicles handling and stopping ability. Please note that the TPMS is not a substitute for proper tire maintenance, and it is the drivers responsibility to maintain correct tire pressure, even if under-inflation has not reached the level to trigger illumination of the TPMS low tire pressure telltale.
Your vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not operating properly. The TPMS malfunction indicator is combined with the low tire pressure telltale. When the system detects a malfunction, the telltale will flash for approximately one minute and then remain continuously illuminated. This sequence will continue upon subsequent vehicle start-ups as long as the malfunction exists. When the malfunction indicator is illuminated, the system may not be able to detect or signal low tire pressure as intended. TPMS malfunctions may occur for a variety of reasons, including the installation of replacement or alternate tires or wheels on the vehicle that prevent the TPMS from functioning properly. Always check the TPMS malfunction telltale after replacing one or more tires or wheels on your vehicle to ensure that the replacement or alternate tires and wheels allow the TPMS to continue to function properly.
NOTICE If any of the below happens, we recommend that you have the system checked by an authorized HYUNDAI dealer. 1. The Low Tire Pressure Telltale/ TPMS
Malfunction Indicator does not illuminate for 3 seconds when the Engine Start/Stop button is pressed to the ON position or when the engine is running.
2. The TPMS Malfunction Indicator remains illuminated after blinking for approximately 1 minute.
3. The Low Tire Pressure Position Telltale remains illuminated.
08
8-11
Low tire pressure warning light
Low tire pressure position and tire pressure telltale
OTM080028L
When the tire pressure monitoring system warning indicators are illuminated and a warning message displayed on the cluster LCD display, one or more of your tires is significantly under-inflated. The Low Tire Pressure Position Telltale will indicate which tire is significantly underinflated by illuminating the corresponding position light. If either telltale illuminates, immediately reduce your speed, avoid hard cornering and anticipate increased stopping distances. You should stop and check your tires as soon as possible. Inflate the tires to the proper pressure as indicated on the vehicles placard or tire inflation pressure label located on the drivers side center pillar outer panel.
If you cannot reach a service station or if the tire cannot hold the newly added air, replace the low pressure tire with the spare tire. The Low Tire Pressure Telltale will remain on and the TPMS Malfunction Indicator may blink for one minute and then remain illuminated (when the vehicle is driven approximately 10 minutes at speed above 15.5 mph (25 km/h)) until you have the low pressure tire repaired and replaced on the vehicle.
CAUTION In winter or cold weather, the Low Tire Pressure Telltale may be illuminated if the tire pressure was adjusted to the recommended tire inflation pressure in warm weather. It does not mean your TPMS is malfunctioning because the decreased temperature leads to a proportional lowering of tire pressure. When you drive your vehicle from a warm area to a cold area or from a cold area to a warm area, or the outside temperature is greatly higher or lower, you should check the tire inflation pressure and adjust the tires to the recommended tire inflation pressure.
WARNING Low pressure damage Significantly low tire pressure makes the vehicle unstable and can contribute to loss of vehicle control and increased braking distances. Continued driving on low pressure tires can cause the tires to overheat and fail.
Emergency situations
8-12
TPMS malfunction indicator
The TPMS Malfunction Indicator will illuminate after it blinks for approximately one minute when there is a problem with the Tire Pressure Monitoring System. We recommend that you have the system checked by an authorized HYUNDAI dealer as soon as possible.
NOTICE If there is a malfunction with the TPMS, the individual tire pressures in the cluster LCD display will not be available. Have the system checked by an authorized HYUNDAI dealer as soon as possible.
NOTICE The TPMS Malfunction Indicator may illuminate after blinking for one minute if the vehicle is near electric power supply cables or radio transmitters such as police stations, government and public offices, broadcasting stations, military installations, airports, transmitting towers, etc. Additionally, the TPMS Malfunction Indicator may illuminate if snow chains are used or electronic devices such as computers, chargers, remote starters, navigation, etc. This may interfere with normal operation of the TPMS.
Changing a tire with TPMS If you have a flat tire, the Low Tire Pressure and Position telltales will come on. We recommend that you have the flat tire repaired by an authorized HYUNDAI dealer as soon as possible or replace the flat tire with the spare tire.
NOTICE It is recommended that you do not use a puncture-repairing agent not approved by HYUNDAI dealer or the equivalent specified for your vehicle to repair and/or inflate a low pressure tire. Tire sealant not approved by HYUNDAI dealer or the equivalent specified for your vehicle may damage the tire pressure sensor.
The spare tire (if equipped) does not come with a tire pressure monitoring sensor. When the low pressure tire or the flat tire is replaced with the spare tire, the Low Tire Pressure Telltale will remain on. Also, the TPMS Malfunction Indicator will illuminate after blinking for one minute if the vehicle is driven at speed above 15.5 mph (25 km/h) for approximately 10 minutes. Once the original wheel equipped with a tire pressure monitoring sensor is reinflated to the recommended pressure and reinstalled on the vehicle, the Low Tire Pressure Telltale and TPMS Malfunction Indicator will go off within a few minutes of driving.
08
8-13
If the indicators do not extinguish after a few minutes, please visit an authorized HYUNDAI dealer. Each wheel is equipped with a tire pressure sensor mounted inside the tire behind the valve stem (except for the spare tire). You must use TPMS specific wheels. It is recommended that you always have your tires serviced by an authorized HYUNDAI dealer. You may not be able to identify a tire with low pressure by simply looking at it. Always use a good quality tire pressure gauge to measure. Please note that a tire that is hot (from being driven) will have a higher pressure measurement than a tire that is cold. A cold tire means the vehicle has been sitting for 3 hours and driven for less than 1 mile (1.6 km) in that 3 hour period. Allow the tire to cool before measuring the inflation pressure. Always be sure the tire is cold before inflating to the recommended pressure.
WARNING The TPMS cannot alert you to severe
and sudden tire damage caused by external factors such as nails or road debris.
If you feel any vehicle instability, immediately take your foot off the accelerator, apply the brakes gradually with light force, and slowly move to a safe position off the road.
WARNING Tampering with, modifying, or disabling the Tire Pressure Monitoring System (TPMS) components may interfere with the systems ability to warn the driver of low tire pressure conditions and/or TPMS malfunctions. Tampering with, modifying, or disabling the Tire Pressure Monitoring System (TPMS) components may void the warranty for that portion of the vehicle.
Information This device complies with Part 15 of the FCC rules. Operation is subject to the following three conditions: 1. This device may not cause harmful
interference. 2. This device must accept any
interference received, including interference that may cause undesired operation.
3. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment.
Emergency situations
8-14
IF YOU hAVE A FLAT TIRE (WITh spARE TIRE, IF EQUIppED)
WARNING Changing a tire can be dangerous. Follow the instructions in this section when changing a tire to reduce the risk of serious injury or death.
CAUTION Be careful as you use the jack handle to stay clear of the flat end. The flat end has sharp edges that could cause cuts.
Jack and tools
OTMA080001
1. Jack 2. Wheel lug wrench
The jack and wheel lug wrench are stored in the luggage compartment under the luggage box cover. The jack is provided for emergency tire changing only.
Jacking instructions The jack is provided for emergency tire changing only. To prevent the jack from rattling while the vehicle is in motion, store it properly. Follow jacking instructions to reduce the possibility of personal injury.
Removing and storing the spare tire Your spare tire is stored underneath your vehicle, directly below the cargo area.
OTM080029L
To remove the spare tire: 1. Open the liftgate. 2. Find the plastic hex bolt cover and
remove the cover with a coin or flat - blade screwdriver.
08
8-15
OTM080030L
3. Connect the socket and wheel lug nut wrench (A).
4. Loosen the bolt enough to lower the spare tire. Turn the wrench counterclockwise until the spare tire reaches the ground.
5. After the spare tire reaches the ground, continue to turn the wrench counterclockwise, and draw the spare tire outside. Never rotate the wrench excessively, otherwise the spare tire carrier may be damaged.
OTM080031L
6. Draw out the retainer guide (1) the through the center hole of spare tire.
To store the spare tire: 1. Lay the tire on the ground with the
valve stem facing up. 2. Place the wheel under the vehicle and
install the retainer guide and chain through the wheel center.
3. Turn the wrench clockwise until it clicks.
CAUTION Ensure the spare tire retainer guide is properly aligned with the center of the spare tire to prevent the spare tire from rattling. Otherwise, it may cause the spare tire to fall off the carrier and lead to an accident.
Emergency situations
8-16
Changing tires
WARNING A vehicle can slip or roll off of a jack causing serious injury or death to you or those nearby. Take the following safety precautions: Do not get under a vehicle that is
supported by a jack. NEVER attempt to change a tire in
the lane of traffic. ALWAYS move the vehicle completely off the road on level, firm ground away from traffic before trying to change a tire. If you cannot find a level, firm place off the road, call a towing service for assistance.
Be sure to use the jack provided with the vehicle.
ALWAYS place the jack on the designated jacking positions on the vehicle and NEVER on the bumpers or any other part of the vehicle for jacking support.
Do not start or run the engine while the vehicle is on the jack.
Do not allow anyone to remain in the vehicle while it is on the jack.
Keep children away from the road and the vehicle.
Follow these steps to change your vehicles tire: 1. Park on a level, firm surface. 2. Shift the gear to P (Park), apply the
parking brake, and press the Engine Start/Stop button to the OFF position.
3. Press the hazard warning flasher button.
4. Remove the wheel lug wrench, jack, jack handle, and spare tire from the vehicle.
OTM080032L
[A] : Block
5. Block both the front and rear of the tire diagonally opposite of the tire you are changing.
08
8-17
OTM080033L
6. Loosen the wheel bolts counterclockwise one turn each in the order shown above, but do not remove any wheel bolts until the tire has been raised off of the ground.
OTM080034L
7. Place the jack at the designated jacking position under the frame closest to the tire you are changing. The jacking positions are plates welded to the frame with two notches. Never jack at any other position or part of the vehicle. Doing so may damage the side seal molding or other parts of the vehicle.
OTM080035L
8. Insert the jack handle into the jack and turn it clockwise, raising the vehicle until the tire clears the ground. Make sure the vehicle is stable on the jack.
9. Loosen a wheel bolt with the wheel lug wrench and remove it with your fingers. Slide the wheel off the studs and lay it flat so it cannot roll away. To put the wheel on the hub, pick up the spare tire, line up the holes with the studs and slide the wheel onto them. If this is difficult, tip the wheel slightly and get the top hole in the wheel lined up with the top stud. Then jiggle the wheel back and forth until the wheel can be slid over the other studs.
Emergency situations
8-18
WARNING Wheels may have sharp edges. Handle them carefully to avoid possible severe injury. Before putting the wheel into place, be sure that there is nothing on the hub or wheel (such as mud, tar, gravel, etc.) that interferes with the wheel from fitting solidly against the hub. If there is, remove it. If there is not good contact on the mounting surface between the wheel and hub, the wheel nuts could come loose and cause the loss of a wheel. Loss of a wheel may result in loss of control of the vehicle. This may cause serious injury or death.
10. To reinstall the wheel, hold it on the studs, put the wheel nuts on the studs and tighten them finger tight. The nuts should be installed with their tapered small diameter ends directed inward. Jiggle the tire to be sure it is completely seated, then tighten the nuts as much as possible with your fingers again.
11. Lower the vehicle to the ground by turning the wheel lug wrench counterclockwise.
OTM080045L
12. Use the wheel lug wrench to tighten the wheel bolts in the order shown. Double-check each wheel bolts until they are tight. After changing tires, we recommend that an authorized HYUNDAI dealer tighten the wheel bolts to their proper torque as soon as possible. The wheel bolt should be tightened to 79~94 lbf.ft (11~13 kgf.m).
If you have a tire gauge, check the tire pressure (see Tires and Wheels section in chapter 2 for tire pressure instructions.). If the pressure is lower or higher than recommended, drive slowly to the nearest service station and adjust it to the recommended pressure. Always reinstall the valve cap after checking or adjusting tire pressure. If the cap is not replaced, air may leak from the tire. If you lose a valve cap, buy another and install it as soon as possible. After changing tires, secure the flat tire and return the jack and tools to their proper storage locations.
08
8-19
NOTICE Check the tire pressure as soon as possible after installing a spare tire. Adjust it to the recommended pressure.
CAUTION Your vehicle has metric threads on the studs and wheel bolts. Make certain during tire changing that the same bolts that were removed are reinstalled. If you have to replace your wheel bolts make sure they have metric threads to avoid damaging the studs and ensure the wheel is properly secured to the hub. We recommend that you consult an authorized HYUNDAI dealer for assistance.
WARNING Wheel studs If the studs are damaged, they may lose their ability to retain the wheel. This could lead to the loss of the wheel and a collision resulting in serious injuries.
If any of the equipment such as the jack, wheel bolts, studs, or other equipment is damaged or in poor condition, do not attempt to change the tire and call for assistance.
Use of compact spare tires (if equipped) Compact spare tires are designed for emergency use only. Drive carefully on the compact spare tire and always follow the safety precautions.
WARNING To prevent compact spare tire failure and loss of control possibly resulting in an accident: Use the compact spare tire only in an
emergency. NEVER operate your vehicle over 50
mph (80 km/h). Do not exceed the vehicles
maximum load rating or the load carrying capacity shown on the sidewall of the compact spare tire.
Do not use the compact spare tire continuously. Repair or replace the original tire as soon as possible to avoid failure of the compact spare tire.
Emergency situations
8-20
When driving with the compact spare tire mounted to your vehicle: Check the tire pressure after installing
the compact spare tire. The compact spare tire should be inflated to 420 kPa (60 psi).
Do not take this vehicle through an automatic car wash while the compact spare tire is installed.
Do not use the compact spare tire on any other vehicle because this tire has been designed especially for your vehicle.
The compact spare tires tread life is shorter than a regular tire. Inspect your compact spare tire regularly and replace worn compact spare tires with the same size and design, mounted on the same wheel.
Do not use more than one compact spare tire at a time.
Do not tow a trailer while the compact spare tire is installed.
Information When the original tire and wheel are repaired and reinstalled on the vehicle, the wheel bolt torque must be set correctly. The correct wheel bolt tightening torque is 79~94 lbf.ft (11~13 kgf.m).
NOTICE To prevent damaging the compact spare tire and your vehicle: Drive slowly enough for the road
conditions to avoid all hazards, such as a potholes or debris.
Avoid driving over obstacles. The compact spare tire diameter is smaller than the diameter of a conventional tire and reduces the ground clearance approximately 25 mm (1 inch).
Do not use tire chains on the compact spare tire. Because of the smaller size, a tire chain will not fit properly.
Do not use the compact spare tire on any other wheels, nor should standard tires, snow tires, wheel covers or trim rings be used with the compact spare wheel.
08
8-21
Jack label
OOS067043
The actual Jack label in the vehicle may differ from the illustration. For more detailed specifications, refer to the label attached to the jack. 1. Model Name 2. Maximum allowable load 3. When using the jack, set your parking brake. 4. When using the jack, stop the engine. 5. Do not get under a vehicle that is supported by a jack. 6. The designated locations under the frame 7. When supporting the vehicle, the base plate of jack must be vertical under the
lifting point. 8. Shift into Reverse gear on vehicles with manual transmission or shift the gear to the
P position on vehicles with automatic transmission. 9. The jack should be used on firm level ground. 10. Jack manufacture 11. Production date 12. Representative company and address
Emergency situations
8-22
OTM080007
For safe operation, carefully read and follow the instructions in this manual before use. (1) Compressor (2) Sealant bottle The Tire Mobility Kit is a temporary fix to the tire and the tire should be inspected by an authorized HYUNDAI dealer as soon as possible.
CAUTION When two or more tires are flat, do not use the tire mobility kit because the supported one sealant of Tire Mobility Kit is only used for one flat tire.
WARNING Do not use the Tire Mobility Kit to repair punctures in the tire walls. This can result in an accident due to tire failure.
WARNING Have your tire repaired as soon as possible. The tire may lose air pressure at any time after inflating with the Tire Mobility Kit.
Introduction With the Tire Mobility Kit you stay mobile even after experiencing a tire puncture. The compressor and sealing compound system effectively and comfortably seals most punctures in a passenger car tire caused by nails or similar objects and reinflates the tire. After you ensure that the tire is properly sealed you can drive cautiously on the tire (distance up to 120 miles (200 km)) at a max. speed of 50 mph (80 km/h)) in order to reach a service station or tire dealer for the tire replacement. It is possible that some tires, especially with larger punctures or damage to the sidewall, cannot be sealed completely. Air pressure loss in the tire may adversely affect tire performance. For this reason, you should avoid abrupt steering or other driving maneuvers, especially if the vehicle is heavily loaded or if a trailer is in use. The Tire Mobility Kit is not designed or intended as a permanent tire repair method and is to be used for one tire only. This instruction shows you step by step how to temporarily seal the puncture simply and reliably. Read the section Notes on the safe use of the Tire Mobility Kit.
IF YOU hAVE A FLAT TIRE (WITh TIRE mObILITY kIT, IF EQUIppED)
08
8-23
WARNING Do not use the TMK if a tire is severely damaged by driving run flat or with insufficient air pressure. Only punctured areas located within the tread region of the tire can be sealed using the TMK.
Notes on the safe use of the Tire Mobility Kit Park your car at the side of the road
so that you can work with the Tire Mobility Kit away from moving traffic.
To be sure your vehicle will not move, even when youre on fairly level ground, always set your parking brake.
Only use the Tire Mobility Kit for sealing/inflation passenger car tires. Only punctured areas located within the tread region of the tire can be sealed using the tire mobility kit.
Do not use on motorcycles, bicycles or any other type of tires.
When the tire and wheel are damaged, do not use Tire Mobility Kit for your safety.
Use of the Tire Mobility Kit may not be effective for tire damage larger than approximately 4 mm (16 inch). Please contact the nearest HYUNDAI dealer if the tire cannot be made roadworthy with the Tire Mobility Kit.
Do not use the Tire Mobility Kit if a tire is severely damaged by driving run flat or with insufficient air pressure.
Do not remove any foreign objects such as nails or screws that have penetrated the tire.
Provided the car is outdoors, leave the engine running. Otherwise operating the compressor may eventually drain the car battery.
Never leave the Tire Mobility Kit unattended while it is being used.
Do not leave the compressor running for more than 10 minutes at a time or it may overheat.
Do not use the Tire Mobility Kit if the ambient temperature is below -22F (30C).
In case of skin contact with the sealant, wash the area thoroughly with plenty of water. If the irritation persists, seek medical attention.
In case of eye contact with the sealant, flush your eyes for at least 15 minutes. If the irritation persists, seek medical attention.
In case of swallowing the sealant, rinse the mouth and drink plenty of water. However, never give anything to an unconscious person and seek medical attention immediately.
Long time exposure to the sealant may cause damage to bodily tissue such as kidney, etc.
Emergency situations
8-24
Components of the Tire Mobility Kit
OTM080022
1. Speed restriction label 2. Sealant and sealant bottle 3. Connection hose of compressor and tire 4. Connector and cable for connection of power outlet 5. Holder for the sealant bottle 6. Compressor 7. ON/OFF switch 8. Pressure gauge for displaying the tire inflation pressure 9. Valve for reducing tire inflation pressure Connectors, cable and connection hose are stored in the compressor housing.
Strictly follow the specified sequence, otherwise the sealant may escape under high pressure.
08
8-25
WARNING Do not use the tire sealant after the sealant has expired (i.e. past the expiration date on the sealant container). This can increase the risk of tire failure.
WARNING Keep out of reach of children. Avoid contact with eyes. Do not swallow.
Using the Tire Mobility Kit
WARNING
OTM080008
Detach the speed restriction label (1) from the sealant bottle (2), and place it in a highly visible place inside the vehicle such as on the steering wheel to remind the driver not to drive too fast.
OTM080025
1. Shake the sealant bottle (2).
Emergency situations
8-26
OTM080023
2. Remove the cover (A) of the sealant bottle (2) and compressor (6).
OTM080024
3. Connect the sealant bottle (2) and compressor (6).
4. Make sure that the valve (9) for reducing tire inflation pressure is closed.
OTM080009
5. Unscrew the valve cap from the valve of the defective and screw the connection hose (3) of the compressor and tire.
NOTICE Securely install the sealant filling hose to the valve. If not, sealant may flow backward, possibly clogging the filling hose.
6. Make sure the compressor turns off.
OTM080010
7. Connect the cable and connector (4) to the power outlet in the vehicle.
8. Start the vehicle.
08
8-27
9. With the engine running, switch on the compressor by pressing [I] and let it run for approximately 5~7 minutes to fill the sealant up to proper pressure. (Refer to Tire and Wheels section in chapter 2). The inflation pressure of the tire after filling is unimportant and will be checked/ corrected later. Be careful not to overinflate the tire and stay away from the tire when filling it.
CAUTION Do not attempt to drive your vehicle if the tire pressure is below 200 kpa (29 psi). This could result in an accident due to sudden tire failure.
10. Switch off the compressor. 11. Detach the hoses from the sealant
bottle connector and from the tire valve.
Return the Tire Mobility Kit to its storage location in the vehicle.
WARNING Do not leave your vehicle running in a poorly ventilated area for extended periods of time. Carbon monoxide poisoning and suffocation can occur.
Distributing the sealant
OOSH079022L
12. Immediately drive approximately 4~6 miles (7~10 km or about 10 minutes) to evenly distribute the sealant in the tire.
Do not exceed a speed of 50 mph (80 km/h). If possible, do not fall below a speed of 12 mph (20 km/h). While driving, if you experience any unusual vibration, ride disturbance or noise, reduce your speed and drive with caution until you can safely pull off of the side of the road. Call for road side service or towing.
Emergency situations
8-28
13. After driving approximately 4~6 miles (7~10 km or about 10 minutes), stop at a safe location.
OTM080009
14. Connect the connection hose (3) of the compressor and tire into the tire valve.
15. Connect cables (4) to the battery. 16. Adjust the tire inflation pressure to the
recommended tire inflation. With the engine running, proceed as follows. - To increase the inflation pressure:
Switch on the compressor. To check the current inflation pressure setting, briefly switch off the compressor.
- To reduce the inflation pressure: Adjust the valve (9) for reducing tire inflation pressure.
NOTICE Do not let the compressor run for more than 10 minutes, otherwise the device will overheat and may be damaged.
Checking the tire inflation pressure 1. After driving approximately 4~6 miles
(7~10 km or about 10 minutes), stop at a safe location.
OTM080009
2. Connect the connection hose (3) of the compressor and tire into the tire valve.
3. Connect cables (4) to the battery. 4. Adjust the tire inflation pressure to the
recommended tire inflation. With the engine running, proceed as follows. - To increase the inflation pressure:
Switch on the compressor. To check the current inflation pressure setting, briefly switch off the compressor.
- To reduce the inflation pressure: Adjust the valve (9) for reducing tire inflation pressure.
NOTICE Do not let the compressor run for more than 10 minutes, otherwise the device will overheat and may be damaged.
08
8-29
Information The pressure gauge may show higher than actual reading when the compressor is running. To get an accurate tire pressure, the compressor needs to be turned off.
CAUTION If the inflation pressure is not maintained, drive the vehicle a second time, refer to Distributing the sealant. Then repeat steps 1 to 4. Use of the TMK may be ineffectual for tire damage larger than approximately 4 mm (0.16 in). We recommend that you contact an authorized HYUNDAI dealer if the tire cannot be made roadworthy with the Tire Mobility Kit.
WARNING The tire inflation pressure must be inflated to the proper pressure (Refer to Tire and Wheels section in chapter 2). If it is not, do not continue driving. Call for road side service or towing.
CAUTION Tire pressure sensor The sealant on the tire pressure sensor and wheel should be removed when you replace the tire with a new one and inspect the tire pressure sensors. We recommend that you get this done at an authorized dealer.
Information When reinstalling the repaired or replaced tire and wheel on the vehicle, tighten the wheel bolt to 79~94 lbf.ft (11~13 kgf.m).
Emergency situations
8-30
TOWING Towing service
OTM080011L
[A] : Dollies
If emergency towing is necessary, we recommend having it done by an authorized HYUNDAI dealer or a commercial tow-truck service. Proper lifting and towing procedures are necessary to prevent damage to the vehicle. The use of wheel dollies or flatbed is recommended. For 2WD vehicles, it is acceptable to tow the vehicle with the front wheels on the ground (without dollies) and the rear wheels off the ground.
If any of the loaded wheels or suspension components are damaged or the vehicle is being towed with the rear wheels on the ground, use a towing dolly under the rear wheels. When being towed by a commercial tow truck and wheel dollies are not used, the rear of the vehicle should always be lifted, not the front. For 4WD vehicles, it must be towed with a wheel lift and dollies or flatbed equipment with all the wheels off the ground.
NOTICE Do not lift the vehicle by the tow fitting or body and chassis parts. Otherwise the vehicle may be damaged.
CAUTION Do not tow the vehicle with the rear
wheels on the ground as this may cause damage to the vehicle.
OTM080013
Do not tow with sling-type equipment. Use wheel lift or flatbed equipment.
OTM080014
08
8-31
When towing your vehicle in an emergency without wheel dollies: Vehicle without EPB 1. Place the ignition switch in the ACC
position. 2. Place the shift lever/button in N
(Neutral). 3. Release the parking brake.
Vehicle with EPB 1. Release EPB before turning off the
engine. 2. Place the ignition switch to the OFF
position. 3. Change the gear to N (Neutral) while
pressing the brake pedal. 4. Place the ignition switch to the ACC
position.
CAUTION Failure to shift the gear to N (Neutral) may cause internal damage to the transmission.
Emergency situations
8-32
EmERgEnCY COmmODITY (IF EQUIppED) Your vehicle is equipped with emergency commodities to help you respond to emergency situation.
Fire extinguisher If there is small fire and you know how to use the fire extinguisher, follow these steps carefully. 1. Pull out the safety pin at the top of the
extinguisher that keeps the handle from being accidentally pressed.
2. Aim the nozzle towards the base of the fire.
3. Stand approximately 2.5 m (8 ft) away from the fire and squeeze the handle to discharge the extinguisher. If you release the handle, the discharge will stop.
4. Sweep the nozzle back and forth at the base of the fire. After the fire appears to be out, watch carefully since it may re-ignite.
First aid kit Supplies for use in giving first aid such as scissors, bandage and adhesive tape, etc. are provided.
Triangle reflector Place the triangle reflector on the road to warn oncoming vehicles during emergencies, such as when the vehicle is parked by the roadside due to problems.
Tire pressure gauge (if equipped) Tires normally lose some air in day-to- day use, and you may have to add a air periodically and usually it is not a sign of a leaking tire, but of normal wear. Always check tire pressure when the tires are cold because tire pressure increases with temperature.
To check the tire pressure, take the following steps: 1. Unscrew the inflation valve cap that is
located on the rim of the tire. 2. Press and hold the gauge against the
tire valve. Some air will leak as you begin and more will leak if you dont press the gauge in firmly.
3. A firm non-leaking push will activate the gauge.
4. Read the tire pressure on the gauge to see whether the tire pressure is low or high.
5. Adjust the tire pressure to the specified pressure. Refer to Tires and Wheels section in chapter 2.
6. Reinstall the inflation valve cap.
9
Maintenance
9. Maintenance
Engine compartment ........................................................................................ 9-3 Maintenance services .......................................................................................9-4
Owners responsibility ................................................................................................ 9-4 Owner maintenance precautions............................................................................... 9-4
Owner maintenance ......................................................................................... 9-5 Owner maintenance schedule ................................................................................... 9-6
Scheduled maintenance services .....................................................................9-7 Normal maintenance schedule .................................................................................. 9-8 Maintenance under severe usage conditions .......................................................... 9-12
Explanation of scheduled maintenance items ..............................................9-14 Fuel filter (for gasoline engine) ................................................................................. 9-14 Parking brake .............................................................................................................. 9-15
Engine oil ..........................................................................................................9-16 Checking the engine oil level .................................................................................... 9-16 Checking the engine oil and filter ..............................................................................9-17
Engine coolant /liquid-cooled intercooler coolant .......................................9-18 Checking the coolant level ........................................................................................ 9-18 Changing coolant ...................................................................................................... 9-20
Brake fluid ........................................................................................................9-21 Checking the brake fluid level ................................................................................... 9-21
Washer fluid .................................................................................................... 9-22 Checking the washer fluid level ................................................................................9-22
Air cleaner ....................................................................................................... 9-23 Filter replacement ......................................................................................................9-23
Cabin air filter .................................................................................................. 9-24 Filter inspection ..........................................................................................................9-24 Filter replacement ......................................................................................................9-24
Wiper blades ................................................................................................... 9-25 Blade inspection .........................................................................................................9-25 Blade replacement .....................................................................................................9-25
Battery ............................................................................................................. 9-28 For best battery service .............................................................................................9-29 Battery capacity label ............................................................................................... 9-30 Battery recharging .................................................................................................... 9-30 Reset items ................................................................................................................. 9-31
9
Tires and wheels ............................................................................................. 9-32 Tire care ......................................................................................................................9-32 Recommended cold tire inflation pressures ............................................................9-32 Check tire inflation pressure .....................................................................................9-33 Tire rotation ................................................................................................................9-34 Wheel alignment and tire balance ............................................................................9-35 Tire replacement ........................................................................................................9-35 Wheel replacement ....................................................................................................9-36 Tire traction ................................................................................................................9-36 Tire maintenance .......................................................................................................9-36 Tire sidewall labeling ..................................................................................................9-37 Low aspect ratio tires ................................................................................................ 9-40
Fuses .................................................................................................................9-41 Instrument panel fuse replacement ........................................................................ 9-42 Engine compartment panel fuse replacement ....................................................... 9-43 Fuse/relay panel description .................................................................................... 9-44
Light bulbs ........................................................................................................9-51 Headlamp, position lamp, turn signal lamp, Daytime Running Light (DRL) replacement ...............................................................................................................9-52 Side repeater lamp replacement ............................................................................. 9-54 Rear combination lamp replacement ...................................................................... 9-54 High mounted stop lamp replacement ....................................................................9-57 License plate lamp replacement .............................................................................. 9-58 Interior light replacement ......................................................................................... 9-58
Appearance care .............................................................................................9-60 Exterior care .............................................................................................................. 9-60 Interior care ............................................................................................................... 9-66
Emission control system.................................................................................9-69 California perchlorate notice ..........................................................................9-72
Gasoline Particulate Filter (GPF) ............................................................................... 9-72
9-3
09
Smartstream G2.5 GDI
Smartstream G2.5 T-GDI
The actual engine compartment in the vehicle may differ from the illustration.
OTMA090001/OTMA090015
1. Engine oil filler cap 2. Engine oil dipstick 3. Engine coolant reservoir 4. Windshield washer fluid reservoir
5. Brake fluid reservoir 6. Battery terminal [+] 7. Battery terminal [-] 8. Air cleaner 9. Fuse box
ENGINE COMPARTMENT
Maintenance
9-4
You should exercise the utmost care to prevent damage to your vehicle and injury to yourself whenever performing any maintenance or inspection procedures. We recommend you have your vehicle maintained and repaired by an authorized HYUNDAI dealer. An authorized HYUNDAI dealer meets HYUNDAIs high service quality standards and receives technical support from HYUNDAI in order to provide you with a high level of service satisfaction.
Owners responsibility Maintenance service and record retention are the owners responsibility. You should retain documents that show proper maintenance has been performed on your vehicle in accordance with the scheduled maintenance service charts shown on the following pages. You need this information to establish your compliance with the servicing and maintenance requirements of your vehicle warranties. Detailed warranty information is provided in your Owners Handbook & Warranty Information booklet. Repairs and adjustments required as a result of improper maintenance or a lack of required maintenance are not covered.
Owner maintenance precautions Inadequate, incomplete or insufficient servicing may result in operational problems with your vehicle that could lead to vehicle damage, an accident, or personal injury. This chapter provides instructions only for the maintenance items that are easy to perform. Your vehicle should not be modified in any way. Such modifications may adversely affect the performance, safety or durability of your vehicle and may, in addition, violate conditions of the limited warranties covering the vehicle.
NOTICE Improper owner maintenance during the warranty period may affect warranty coverage. For details, read the separate Service Passport provided with the vehicle. If youre unsure about any servicing or maintenance procedure, we recommend that the system be serviced by an authorized HYUNDAI dealer.
MAINTENANCE SERVICES
09
9-5
WARNING Performing maintenance work on a vehicle can be dangerous. If you lack sufficient knowledge and experience or the proper tools and equipment to do the work, we recommend that having it done by an authorized HYUNDAI dealer. ALWAYS follow these precautions for performing maintenance work: Park your vehicle on level ground.
Shift the vehicle to P (Park), apply the parking brake, and press the Engine Start/Stop button to the OFF position.
Block the tires (front and back) to prevent the vehicle from moving. Remove loose clothing or jewelry that can become entangled in moving parts.
If you must run the engine during maintenance, do so out doors or in an area with plenty of ventilation.
Keep flames, sparks, or smoking materials away from the battery and fuel-related parts.
WARNING Touching metal parts Do not touch metal parts (including strut bars) while the engine is operating or hot. Doing so could result in serious personal injury. Turn the engine off and wait until the metal parts cool down to perform maintenance work on the vehicle.
The following lists are vehicle checks and inspections that should be performed by the owner or an authorized HYUNDAI dealer at the frequencies indicated to help ensure safe, dependable operation of your vehicle. Any adverse conditions should be brought to the attention of your dealer as soon as possible. These Owner Maintenance vehicle checks are generally not covered by warranties and you may be charged for labor, parts and lubricants used.
OWNER MAINTENANCE
Maintenance
9-6
Owner maintenance schedule When you stop for fuel: Check the engine oil level. Check the coolant level in the engine
coolant reservoir or the water-cooled intercooler coolant reservoir.
Check the windshield washer fluid level.
Check for low or under-inflated tires.
WARNING Be careful when checking your coolant level when the engine is hot. This may result in coolant being blown out of the opening and cause serious burns and other injuries.
While operating your vehicle: Note any changes in the sound of the
exhaust or any smell of exhaust fumes in the vehicle.
Check for vibrations in the steering wheel. Notice if there is any increased steering effort or looseness in the steering wheel, or change in its straight-ahead position.
Notice if your vehicle constantly turns slightly or pulls to one side when traveling on smooth, level road.
When stopping, listen and check for unusual sounds, pulling to one side, increased brake pedal travel or hard- to-push brake pedal.
If any slipping or changes in the operation of your transmission occurs, check the transmission fluid level.
Check the automatic transmission P (Park) function.
Check the parking brake. Check for fluid leaks under your
vehicle (water dripping from the air conditioning system during or after use is normal).
At least monthly: Check coolant level in the engine
coolant reservoir. Check the operation of all exterior
lights, including the stoplights, turn signals and hazard warning flashers.
Check the inflation pressures of all tires including the spare for tires that are worn, show uneven wear, or are damaged.
Check for loose wheel lug nuts.
At least twice a year: (i.e., every Spring and Autumn) Check radiator, heater and air
conditioning hoses for leaks or damage.
Check windshield washer spray and wiper operation. Clean wiper blades with a clean cloth dampened with washer fluid.
Check headlamp alignment. Check muffler, exhaust pipes, shields
and clamps. Check the seat belts for wear and
function.
At least once a year: Clean body and door drain holes. Lubricate door hinges and hood
hinges. Lubricate door and hood locks and
latches. Lubricate door rubber weather strips. Check the air conditioning system. Inspect and lubricate automatic
transmission linkage and controls. Clean the battery and terminals. Check the brake fluid level.
09
9-7
Follow Normal Maintenance Schedule if the vehicle is usually operated where none of the following conditions apply. If any of the following conditions apply, you must follow the Maintenance Under Severe Usage Conditions. Repeated driving short distance of less than 5 miles (8 km) in normal temperature or
less than 10 miles (16 km) in freezing temperature Extensive engine idling or low speed driving for long distances Driving on rough, dusty, muddy, unpaved, graveled or salt-spread roads Driving in areas using salt or other corrosive materials or in very cold weather Driving in heavy dust conditions Driving in heavy traffic area Driving on uphill, downhill, or mountain road repeatedly Towing a trailer or using a camper, or roof rack Driving as a patrol car, taxi, other commercial use of vehicle towing Driving over 106 miles (170 km/h) Frequently driving in stop-and-go condition Engine oil usage which is not recommended (mineral, semi-synthetic, lower grade
spec, etc.)
If your vehicle is operated under the above conditions, you should inspect, replace or refill more frequently than the following Normal Maintenance Schedule. After the periods or distance shown in the chart, continue to follow the prescribed maintenance intervals.
SCHEDULED MAINTENANCE SERVICES
Maintenance
9-8
N or
m al
m ai
nt en
an ce
s ch
ed ul
e
M A
IN TE
N A
N C
E IN
TE R
VA LS
M A
IN TE
N A
N C
E IT
EM
N um
be r o
f m on
th s
or d
ri vi
ng d
is ta
nc e,
w hi
ch ev
er c
om es
fi rs
t M
on th
s 12
24 36
48 60
72 84
96 10
8 12
0 13
2 14
4 15
6 M
ile s
1, 00
0 8
16 24
32 40
48 56
64 72
80 88
96 10
4 K
m 1
,0 00
13 26
39 52
65 78
91 10
4 11
7 13
0 14
3 15
6 16
9 En
gi ne
o il
an d
en gi
ne o
il fil
te r *
1 * 2
R R
R R
R R
R R
R R
R R
R
D riv
e be
lts *3
At fi
rs t,
in sp
ec t a
t 4 8,
0 0
0 m
ile s
(7 8,
0 0
0 k
m ) o
r 7 2
m on
th s.
A ft
er th
at ,
in sp
ec t e
ve ry
8 ,0
0 0
m ile
s (1
3, 0
0 0
k m
) o r 1
2 m
on th
s Fu
el a
dd iti
ve s
*4 A
dd e
ve ry
8 ,0
0 0
m ile
s (1
3, 0
0 0
k m
) o r 1
2 m
on th
s I :
In sp
ec t a
nd if
n ec
es sa
ry , a
dj us
t, c
or re
ct , c
le an
o r r
ep la
ce .
R :
R ep
la ce
o r c
ha ng
e. *1
: R
eq ui
re s
A PI
S N
P LU
S (o
r a bo
ve ) g
ra de
e ng
in e
oi l.
If a
lo w
er g
ra de
e ng
in e
oi l i
s us
ed , t
he n
th e
en gi
ne o
il an
d en
gi ne
o il
fil te
r m us
t be
re pl
ac ed
a t e
ve ry
5 ,0
0 0
m ile
s (8
,0 0
0 k
m ) o
r 6 m
on th
s as
in di
ca te
d fo
r s ev
er e
m ai
nt en
an ce
c on
di tio
n. *2
: C
he ck
th e
en gi
ne o
il le
ve l a
nd le
ak e
ve ry
3 50
m ile
s (5
0 0
km ) o
r b ef
or e
st ar
tin g
a lo
ng tr
ip .
*3 :
T he
d riv
e be
lt sh
ou ld
b e
re pl
ac ed
w he
n cr
ac ks
o cc
ur o
r t en
si on
is re
du ce
d ex
ce ss
iv el
y. *4
: If
T O
P TI
ER D
et er
ge nt
G as
ol in
e is
n ot
a va
ila bl
e, o
ne b
ot tle
o f a
dd iti
ve is
re co
m m
en de
d. A
dd iti
ve s
ar e
av ai
la bl
e fr
om y
ou r
au th
or iz
ed H
YU N
D A
I d ea
le r a
lo ng
w ith
in fo
rm at
io n
on h
ow to
u se
th em
. D o
no t m
ix o
th er
a dd
iti ve
s.
09
9-9
N or
m al
m ai
nt en
an ce
s ch
ed ul
e
M A
IN TE
N A
N C
E IN
TE R
VA LS
M A
IN TE
N A
N C
E IT
EM
N um
be r o
f m on
th s
or d
ri vi
ng d
is ta
nc e,
w hi
ch ev
er c
om es
fi rs
t M
on th
s 12
24 36
48 60
72 84
96 10
8 12
0 13
2 14
4 15
6 M
ile s
1, 00
0 8
16 24
32 40
48 56
64 72
80 88
96 10
4 K
m 1
,0 00
13 26
39 52
65 78
91 10
4 11
7 13
0 14
3 15
6 16
9 En
gi ne
o il
an d
en gi
ne o
il fil
te r *
1 * 2
R R
R R
R R
R R
R R
R R
R
D riv
e be
lts *3
At fi
rs t,
in sp
ec t a
t 4 8,
0 0
0 m
ile s
(7 8,
0 0
0 k
m ) o
r 7 2
m on
th s.
A ft
er th
at ,
in sp
ec t e
ve ry
8 ,0
0 0
m ile
s (1
3, 0
0 0
k m
) o r 1
2 m
on th
s Fu
el a
dd iti
ve s
*4 A
dd e
ve ry
8 ,0
0 0
m ile
s (1
3, 0
0 0
k m
) o r 1
2 m
on th
s I :
In sp
ec t a
nd if
n ec
es sa
ry , a
dj us
t, c
or re
ct , c
le an
o r r
ep la
ce .
R :
R ep
la ce
o r c
ha ng
e. *1
: R
eq ui
re s
A PI
S N
P LU
S (o
r a bo
ve ) g
ra de
e ng
in e
oi l.
If a
lo w
er g
ra de
e ng
in e
oi l i
s us
ed , t
he n
th e
en gi
ne o
il an
d en
gi ne
o il
fil te
r m us
t be
re pl
ac ed
a t e
ve ry
5 ,0
0 0
m ile
s (8
,0 0
0 k
m ) o
r 6 m
on th
s as
in di
ca te
d fo
r s ev
er e
m ai
nt en
an ce
c on
di tio
n. *2
: C
he ck
th e
en gi
ne o
il le
ve l a
nd le
ak e
ve ry
3 50
m ile
s (5
0 0
km ) o
r b ef
or e
st ar
tin g
a lo
ng tr
ip .
*3 :
T he
d riv
e be
lt sh
ou ld
b e
re pl
ac ed
w he
n cr
ac ks
o cc
ur o
r t en
si on
is re
du ce
d ex
ce ss
iv el
y. *4
: If
T O
P TI
ER D
et er
ge nt
G as
ol in
e is
n ot
a va
ila bl
e, o
ne b
ot tle
o f a
dd iti
ve is
re co
m m
en de
d. A
dd iti
ve s
ar e
av ai
la bl
e fr
om y
ou r
au th
or iz
ed H
YU N
D A
I d ea
le r a
lo ng
w ith
in fo
rm at
io n
on h
ow to
u se
th em
. D o
no t m
ix o
th er
a dd
iti ve
s.
N or
m al
m ai
nt en
an ce
s ch
ed ul
e
M A
IN TE
N A
N C
E IN
TE R
VA LS
M A
IN TE
N A
N C
E IT
EM
N um
be r o
f m on
th s
or d
ri vi
ng d
is ta
nc e,
w hi
ch ev
er c
om es
fi rs
t M
on th
s 12
24 36
48 60
72 84
96 10
8 12
0 13
2 14
4 15
6 M
ile s
1, 00
0 8
16 24
32 40
48 56
64 72
80 88
96 10
4 K
m 1
,0 00
13 26
39 52
65 78
91 10
4 11
7 13
0 14
3 15
6 16
9 A
ir cl
ea ne
r f ilt
er I
I R
I I
R I
I R
I I
R I
Sp ar
k pl
ug s
*5 TG
D I
R R
EX C
EP T
TG D
I R
ep la
ce e
ve ry
9 6,
0 0
0 m
ile s
(1 56
,0 0
0 k
m )
Va po
r h os
e, fu
el fi
lle r c
ap a
nd fu
el ta
nk
I I
I I
I I
Fu el
ta nk
a ir
fil te
r * 6
I I
I I
I I
Fu el
li ne
s, h
os es
a nd
c on
ne ct
io ns
I I
I I
I I
I : In
sp ec
t a nd
if n
ec es
sa ry
, a dj
us t,
c or
re ct
, c le
an o
r r ep
la ce
. R
: R
ep la
ce o
r c ha
ng e.
*5 :
Fo r y
ou r c
on ve
ni en
ce , i
t c an
b e
re pl
ac ed
p rio
r t o
it s
in te
rv al
w he
n yo
u do
m ai
nt en
an ce
o f o
th er
it em
s.
*6 :
Th e
fu el
fi lte
r i s
co ns
id er
ed to
b e
m ai
nt en
an ce
fr ee
b ut
p er
io di
c in
sp ec
tio n
is re
co m
m en
de d
fo r t
hi s
m ai
nt en
an ce
s ch
ed ul
e de
pe nd
s on
fu el
q ua
lit y.
If th
er e
ar e
so m
e im
po rt
an t m
at te
rs li
ke fu
el fl
ow re
st ric
tio n,
s ur
gi ng
, l os
s of
p ow
er , h
ar d
st ar
tin g
pr ob
le m
et
c, re
pl ac
e th
e fu
el fi
lte r i
m m
ed ia
te ly
re ga
rd le
ss o
f m ai
nt en
an ce
s ch
ed ul
e. W
e re
co m
m en
d th
at y
ou c
on su
lt an
a ut
ho riz
ed
H YU
N D
A I d
ea le
r f or
d et
ai ls
.
Maintenance
9-10
N or
m al
m ai
nt en
an ce
s ch
ed ul
e
M A
IN TE
N A
N C
E IN
TE R
VA LS
M A
IN TE
N A
N C
E IT
EM
N um
be r o
f m on
th s
or d
ri vi
ng d
is ta
nc e,
w hi
ch ev
er c
om es
fi rs
t M
on th
s 12
24 36
48 60
72 84
96 10
8 12
0 13
2 14
4 15
6 M
ile s
1, 00
0 8
16 24
32 40
48 56
64 72
80 88
96 10
4 K
m 1
,0 00
13 26
39 52
65 78
91 10
4 11
7 13
0 14
3 15
6 16
9
C oo
lin g
sy st
em In
sp ec
t c oo
la nt
le ve
l f or
le ak
e ve
ry d
ay
At fi
rs t,
in sp
ec t 4
0, 0
0 0
m ile
s (6
0, 0
0 0
k m
) o r 4
8 m
on th
s.
Af te
r t ha
t, in
sp ec
t e ve
ry 2
0, 0
0 0
m ile
s (3
0, 0
0 0
k m
) o r 2
4 m
on th
s
En gi
ne c
oo la
nt TG
D I
At fi
rs t,
re pl
ac e
at 8
0, 0
0 0
m ile
s (1
30 ,0
0 0
k m
) o r 1
0 y
ea rs
. Af
te r t
ha t,
re pl
ac e
ev er
y 24
,0 0
0 m
ile s
(3 9,
0 0
0 k
m ) o
r 2 4
m on
th s
EX C
EP T
TG D
I At
fi rs
t, re
pl ac
e at
12 0,
0 0
0 m
ile s
(2 0
0, 0
0 0
k m
) o r 1
20 m
on th
s.
Af te
r t ha
t, re
pl ac
e ev
er y
30 ,0
0 0
m ile
s (5
0, 0
0 0
k m
) o r 2
4 m
on th
s B
at te
ry c
on di
tio n
I I
I I
I I
I I
I I
I I
I B
ra ke
li ne
s, h
os es
a nd
c on
ne ct
io ns
I I
I I
I I
I I
I I
I I
I
B ra
ke p
ed al
I I
I I
I I
Pa rk
in g
br ak
e (if
e qu
ip pe
d) I
I I
I I
I
B ra
ke fl
ui d
TG D
I In
sp ec
t e ve
ry 6
,0 0
0 m
ile s
(1 0,
0 0
0 k
m ) o
r 1 2
m on
th s,
R
ep la
ce e
ve ry
4 8,
0 0
0 m
ile s
(8 0,
0 0
0 k
m ) o
r 4 8
m on
th s
EX C
EP T
TG D
I In
sp ec
t e ve
ry 7
,5 0
0 m
ile s
(1 2,
0 0
0 k
m ) o
r 1 2
m on
th s,
R
ep la
ce e
ve ry
6 0,
0 0
0 m
ile s
(9 6,
0 0
0 k
m ) o
r 4 8
m on
th s
I : In
sp ec
t a nd
if n
ec es
sa ry
, a dj
us t,
c or
re ct
, c le
an o
r r ep
la ce
. R
: R
ep la
ce o
r c ha
ng e.
09
9-11
N or
m al
m ai
nt en
an ce
s ch
ed ul
e
M A
IN TE
N A
N C
E IN
TE R
VA LS
M A
IN TE
N A
N C
E IT
EM
N um
be r o
f m on
th s
or d
ri vi
ng d
is ta
nc e,
w hi
ch ev
er c
om es
fi rs
t M
on th
s 12
24 36
48 60
72 84
96 10
8 12
0 13
2 14
4 15
6 M
ile s
1, 00
0 8
16 24
32 40
48 56
64 72
80 88
96 10
4 K
m 1
,0 00
13 26
39 52
65 78
91 10
4 11
7 13
0 14
3 15
6 16
9
C oo
lin g
sy st
em In
sp ec
t c oo
la nt
le ve
l f or
le ak
e ve
ry d
ay
At fi
rs t,
in sp
ec t 4
0, 0
0 0
m ile
s (6
0, 0
0 0
k m
) o r 4
8 m
on th
s.
Af te
r t ha
t, in
sp ec
t e ve
ry 2
0, 0
0 0
m ile
s (3
0, 0
0 0
k m
) o r 2
4 m
on th
s
En gi
ne c
oo la
nt TG
D I
At fi
rs t,
re pl
ac e
at 8
0, 0
0 0
m ile
s (1
30 ,0
0 0
k m
) o r 1
0 y
ea rs
. Af
te r t
ha t,
re pl
ac e
ev er
y 24
,0 0
0 m
ile s
(3 9,
0 0
0 k
m ) o
r 2 4
m on
th s
EX C
EP T
TG D
I At
fi rs
t, re
pl ac
e at
12 0,
0 0
0 m
ile s
(2 0
0, 0
0 0
k m
) o r 1
20 m
on th
s.
Af te
r t ha
t, re
pl ac
e ev
er y
30 ,0
0 0
m ile
s (5
0, 0
0 0
k m
) o r 2
4 m
on th
s B
at te
ry c
on di
tio n
I I
I I
I I
I I
I I
I I
I B
ra ke
li ne
s, h
os es
a nd
c on
ne ct
io ns
I I
I I
I I
I I
I I
I I
I
B ra
ke p
ed al
I I
I I
I I
Pa rk
in g
br ak
e (if
e qu
ip pe
d) I
I I
I I
I
B ra
ke fl
ui d
TG D
I In
sp ec
t e ve
ry 6
,0 0
0 m
ile s
(1 0,
0 0
0 k
m ) o
r 1 2
m on
th s,
R
ep la
ce e
ve ry
4 8,
0 0
0 m
ile s
(8 0,
0 0
0 k
m ) o
r 4 8
m on
th s
EX C
EP T
TG D
I In
sp ec
t e ve
ry 7
,5 0
0 m
ile s
(1 2,
0 0
0 k
m ) o
r 1 2
m on
th s,
R
ep la
ce e
ve ry
6 0,
0 0
0 m
ile s
(9 6,
0 0
0 k
m ) o
r 4 8
m on
th s
I : In
sp ec
t a nd
if n
ec es
sa ry
, a dj
us t,
c or
re ct
, c le
an o
r r ep
la ce
. R
: R
ep la
ce o
r c ha
ng e.
N or
m al
m ai
nt en
an ce
s ch
ed ul
e
M A
IN TE
N A
N C
E IN
TE R
VA LS
M A
IN TE
N A
N C
E IT
EM
N um
be r o
f m on
th s
or d
ri vi
ng d
is ta
nc e,
w hi
ch ev
er c
om es
fi rs
t M
on th
s 12
24 36
48 60
72 84
96 10
8 12
0 13
2 14
4 15
6 M
ile s
1, 00
0 8
16 24
32 40
48 56
64 72
80 88
96 10
4 K
m 1
,0 00
13 26
39 52
65 78
91 10
4 11
7 13
0 14
3 15
6 16
9 D
is c
br ak
es a
nd p
ad s
I I
I I
I I
I I
I I
I I
I
St ee
rin g
ge ar
ra ck
, l in
ka ge
a nd
bo
ot s
TG D
I I
I I
I I
I I
I I
I I
I I
EX C
EP T
TG D
I I
I I
D riv
es ha
ft a
nd b
oo ts
I I
I I
I I
I I
I Ti
re (p
re ss
ur e
& tr
ea d
w ea
r) I
I I
I I
I I
I I
I I
I I
Su sp
en si
on m
ou nt
in g
bo lts
I I
I I
I I
I I
I I
I I
I A
ir co
nd iti
on er
re fr
ig er
an t
I I
I I
I I
I I
I I
I I
I A
ir co
nd iti
on er
c om
pr es
so r
I I
I I
I I
I I
I I
I I
I C
lim at
e co
nt ro
l a ir
fil te
r I
R I
R I
R I
R I
R I
R I
A ut
om at
ic tr
an sm
is si
on fl
ui d
N o
ch ec
k, N
o se
rv ic
e re
qu ire
d D
ua l c
lu tc
h tr
an sm
is si
on fl
ui d
In sp
ec t e
ve ry
4 0,
0 0
0 m
ile (6
0, 0
0 0
k m
) o r 4
8 m
on th
s Ex
ha us
t p ip
e an
d m
uf fle
r I
I I
I I
I I
I I
I I
I I
Fr on
t ( AW
D ) /
re ar
d iff
er en
tia l o
il *1
I I
I I
I I
Tr an
sf er
c as
e oi
l ( AW
D )
N o
ch ec
k, N
o se
rv ic
e re
qu ire
d Pr
op el
le r s
ha ft
I I
I I
I I
I I
I I
I I
I I :
In sp
ec t a
nd if
n ec
es sa
ry , a
dj us
t, c
or re
ct , c
le an
o r r
ep la
ce .
R :
R ep
la ce
o r c
ha ng
e. *1
: Fr
on t/
re ar
d iff
er en
tia l o
il sh
ou ld
b e
ch an
ge d
an yt
im e,
fr on
t/ re
ar d
iff er
en tia
l h av
e be
en s
ub m
er ge
d in
w at
er .
Maintenance
9-12
Maintenance under severe usage conditions The following items must be serviced more frequently on cars mainly used under severe driving conditions. Refer to the chart below for the appropriate maintenance intervals. R : Replace I : Inspect and if necessary, adjust, correct, clean or replace
Maintenance item Maintenance operation Maintenance intervals Driving
condition
Engine oil and engine oil filter*1 R Replace every 5,000 miles
(8,000 km) or 6 months
A, B, C, D, E, F, G, H, I, J,
K, L
Air cleaner filter R Replace more frequently
depending on the condition
C, E
Spark plugs R Replace more frequently
depending on the condition
A, B, H, I, K
Steering gear box, linkage & boots / lower arm ball joint, upper arm ball joint
I Inspect more frequently
depending on the condition
C, D, E, F, G, H, I
Disc brakes and pads, calipers and rotors I
Inspect more frequently depending on the
condition C, D, G, H
*1 : If a lower grade engine oil (below API SN PLUS) is substituted, then the engine oil and engine oil filter must be replaced at every 5,000 miles (8,000 km) or 6 months as indicated for severe maintenance
09
9-13
Maintenance item Maintenance operation
Maintenance intervals
Driving condition
Parking brake (if equipped) I Inspect more
frequently depending on the condition
C, D, G, H
Drive shafts and boots T-GDI I Every 3,000 miles or
6 months C, D, E, F, G, H, IEXCEPT
T-GDI I Every 3,750 miles or 6 months
Climate control air filter (for evaporator and blower unit) R
Replace more frequently depending
on the condition C, E
Automatic transmission fluid R Replace every 60,000 miles (96,000 km)
A, C, E, F, G, H, I, K
Dual clutch transmission fluid R Replace every 62,000 miles (100,000 km)
A, C, D, E, F, G, H, I, J
Front differential oil (AWD) / Rear differential oil R Replace every 72,000
miles (120,000 km) C, D, E, G,
H, I, J
Transfer case oil (AWD) - No check, No service required -
Propeller shaft I Inspect more
frequently depending on the condition
C, D, E, F, G, H, I, J
Severe driving conditions A. Repeatedly driving short distance of less than 5 miles (8 km) in normal temperature
or less than 10 miles (16 km) in freezing temperature B. Extensive engine idling or low speed driving for long distances C. Driving on rough, dusty, muddy, unpaved, graveled or saltspread roads D. Driving in areas using salt or other corrosive materials or in very cold weather E. Driving in the condition of inflowing sand or dust into engine F. Driving in heavy traffic area G. Driving on uphill, downhill, or mountain roads H. Towing a trailer (if equipped) I. Driving for patrol car, taxi, commercial car or vehicle towing J. Driving over 106 mph (170 km/h) K. Frequently driving in stop-and-go conditions L. Engine oil usage which is not recommended (mineral, semi-synthetic, lower grade
spec, etc.)
Maintenance
9-14
Engine oil and filter The engine oil and filter should be changed at the intervals specified in the maintenance schedule. If the vehicle is being driven in severe conditions, more frequent oil and filter changes are required.
Drive belts Inspect all drive belts for evidence of cuts, cracks, excessive wear or oil saturation and replace if necessary. Drive belts should be checked periodically for proper tension and adjusted as necessary.
Information When you are inspecting the belt, turn the engine off.
Fuel lines, fuel hoses and connections Check the fuel lines, fuel hoses and connections for leakage and damage. We recommend an authorized HYUNDAI dealer replace any damaged or leaking parts immediately.
Fuel filter (for gasoline engine) The fuel filter is considered to be maintenance free but periodic inspection is recommended for this maintenance depends on fuel quality. If there are some important matters like fuel flow restriction, surging, loss of power, hard starting problem etc., replace the fuel filter immediately. We recommend that you consult an authorized HYUNDAI dealer for details.
Vapor hose and fuel filler cap The vapor hose and fuel filler cap should be inspected at those intervals specified in the maintenance schedule. Make sure a new vapor hose or fuel filler cap is correctly replaced.
Vacuum crankcase ventilation hoses (if equipped) Inspect the surface of hoses for evidence of heat and/or mechanical damage. Hard and brittle rubber, cracking, tears, cuts, abrasions, and excessive swelling indicate deterioration. Particular attention should be paid to examine those hose surfaces nearest to high heat sources, such as the exhaust manifold. Inspect the hose routing to ensure that the hoses do not come in contact with any heat source, sharp edges or moving component which might cause heat damage or mechanical wear. Inspect all hose connections, such as clamps and couplings, to make sure they are secure, and that no leaks are present. Hoses should be replaced immediately if there is any evidence of deterioration or damage.
ExPLANATION OF SCHEDULED MAINTENANCE ITEMS
09
9-15
Air cleaner filter We recommend that the air cleaner filter be replaced by an authorized HYUNDAI dealer.
Spark plugs Make sure to install new spark plugs of the correct heat range.
Cooling system Check cooling system components, such as radiator, coolant reservoir, hoses and connections for leakage and damage. Replace any damaged parts.
Engine coolant The coolant should be changed at the intervals specified in the maintenance schedule.
Engine coolant/water-cooled intercooler coolant The coolant should be changed at the intervals specified in the maintenance schedule.
Automatic transmission fluid Automatic transmission fluid should not be checked under normal usage conditions. We recommend that the automatic transmission fluid be changed by an authorized HYUNDAI dealer according to the maintenance schedule.
Information Automatic transmission fluid color is red when new. As the vehicle is driven, the automatic transmission fluid will begin to look darker. This is a normal condition. It does not need to be replaced based on the color change.
NOTICE The use of a non-specified fluid could result in transmission malfunction and failure. Use only specified automatic transmission fluid. (Refer to Recommended Lubricants and Capacities section in chapter 2.)
Dual clutch transmission fluid (if equipped) Inspect the dual clutch transmission fluid according to the maintenance schedule.
Brake hoses and lines Visually check for proper installation, chafing, cracks, deterioration and any leakage. Replace any deteriorated or damaged parts immediately.
Brake fluid Check the brake fluid level in the brake fluid reservoir. The level should be between the MIN and the MAX marks on the side of the reservoir. Use only hydraulic brake fluid conforming to DOT 4 specification.
Parking brake Inspect the parking brake system including the parking brake lever and cables.
Maintenance
9-16
ENGINE OIL Brake discs, pads, calipers and rotors Check the pads, the disc, and the rotor for any excessive wear-out. Inspect calipers for any fluid leakage. For more information on checking the pads or lining wear limit, refer to the HYUNDAI web site. (http://service.hyundai-motor.com)
Propeller shaft Check the propeller shaft, boots, clamps, rubber couplings and center-bearing rubber for cracks, deterioration, or damage. Replace any damaged parts and if necessary, repack the grease.
Suspension mounting bolts Check the suspension connections for looseness or damage. Retighten to the specified torque.
Steering gear box, linkage & boots/lower arm ball joint With the vehicle stopped and the engine off, check for excessive free-play in the steering wheel. Check the linkage for bends or damage. Check the dust boots and ball joints for deterioration, cracks, or damage. Replace any damaged parts.
Drive shafts and boots Check the drive shafts, boots and clamps for cracks, deterioration, or damage. Replace any damaged parts and, if necessary, repack the grease.
Air conditioning refrigerant Check the air conditioning lines and connections for leakage and damage.
Checking the engine oil level Gasoline engine 1. Follow all of the oil manufacturers
precautions. 2. Be sure the vehicle is on the level
ground in P (Park) with the parking brake set and the wheels blocked.
3. Turn the engine on and allow the engine to reach normal operating temperature.
4. Turn the engine off and wait about 15 minutes for the oil to return to the oil pan.
5. Pull the dipstick out, wipe it clean, and re-insert it fully.
Smartstream G2.5 GDI
OTMA090002
Smartstream G2.5 T-GDI
OTMA090016
6. Pull the dipstick out again and check the level. The level should be between F (Full) and L (Low).
09
9-17
Smartstream G2.5 GDI
OTMA090003
Smartstream G2.5 T-GDI
OTMA090017
7. If it is near or at L, add enough oil to bring the level to F.
Use only the specified engine oil (Refer to Recommended Lubricants and Capacities section in chapter 2).
NOTICE To prevent damage to your engine: Do not overfill with engine oil. Add oil
in small quantities and recheck level to ensure engine is not overfilled.
Do not spill engine oil when adding or changing engine oil. Use a funnel to help prevent oil from being spilled on engine components. Wipe off spilled oil immediately.
Checking the engine oil and filter
OCN7080082L
We recommend that the engine oil and filter be changed by an authorized HYUNDAI dealer according to the Maintenance Schedule at the beginning of this chapter.
WARNING CALIFORNIA PROPOSITION 65 WARNING Engine oil contains chemicals known to the State of California to cause cancer, birth defects and reproductive harm. Used engine oil may cause irritation or cancer of the skin if left in contact with the skin for prolonged periods of time. Always protect your skin by washing your hands thoroughly with soap and warm water as soon as possible after handling used oil.
Maintenance
9-18
EngInE COOLAnT /LIQUID-COOLED InTERCOOLER COOLANT The high-pressure cooling system has a reservoir filled with year-round antifreeze coolant. The reservoir is filled at the factory. Check the antifreeze protection and coolant level at least once a year, at the beginning of the winter season and before traveling to a colder climate.
Checking the coolant level Smartstream G2.5 GDI
OTMA090004
Smartstream G2.5 T-GDI
OTMA090018
Check the condition and connections of all cooling system hoses and heater hoses. Replace any swollen or deteriorated hoses. The coolant level should be filled between the MAX and the MIN marks on the side of the coolant reservoir when the engine is cool. If the coolant level is low, add enough distilled (deionized) water to bring the level to the MAX mark, but do not overfill. If frequent additions are required, we recommend that you see an authorized HYUNDAI dealer for a cooling system inspection.
WARNING Never remove the engine coolant cap and/or water- cooled intercooler coolant cap or the drain plug while the engine and radiator are hot. Hot coolant and steam may blow out under pressure, causing serious injury.
09
9-19
Turn the vehicle off and wait until the engine cools down. Use extreme care when removing the engine coolant cap and/or water-cooled intercooler coolant cap. Wrap a thick towel around it, and turn it counterclockwise slowly to the first stop. Step back while the pressure is released from the cooling system. When you are sure all the pressure has been released, press down on the cap, using a thick towel, and continue turning counterclockwise to remove it.
Information The coolant level is influenced by the engine temperature. Before checking or refilling the coolant, turn the engine off.
WARNING
The electric motor for the cooling fan may continue to operate or start up when the engine is not running and can cause serious injury. Keep hands, clothing and tools away from the rotating fan blades of the cooling fan. Always turn off the vehicle unless the vehicle has to be inspected with the engine on. Be cautious as the cooling fan may operate if the negative (-) battery terminal is not disconnected.
WARNING Make sure the coolant cap is properly closed after refilling coolant. Otherwise the engine could be overheated while driving. Engine compartment front view
OOSH089010L
1. Check if the coolant cap label is straight in front.
OJX1099046
2. Make sure that the tiny protrusions inside the coolant cap is securely interlocked.
Maintenance
9-20
Recommended coolant When adding coolant, use only
deionized water, distilled water or soft water for your vehicle and never mix hard water in the coolant filled at the factory.
An incorrect coolant mixture can result in severe malfunction or engine damage.
The engine in your vehicle has aluminum engine parts and must be protected by an phosphate-based ethylene glycol coolant to prevent corrosion and freezing.
Do not use alcohol or methanol coolant or mix them with the specified coolant.
Do not use a solution that contains more than 60% antifreeze or less than 35% antifreeze, which would reduce the effectiveness of the solution.
For mixing percentage, refer to the following table:
Ambient Temperature
Mixture Percentage (volume)
Antifreeze Water 5F (-15C) 35 65
-13F (-25C) 40 60 -31F (-35C) 50 50 -49F (-45C) 60 40
Information If in doubt about the mix ratio, a 50% water and 50% antifreeze mix is the easiest to mix together as it will be the same quantity of each. It is suitable to use for most temperature ranges of -31F (-35C) and higher.
Changing coolant We recommend that coolant be changed by an authorized HYUNDAI dealer according to the Maintenance Schedule at the beginning of this chapter.
WARNING Do not use engine coolant or antifreeze in the washer fluid reservoir. Engine coolant can severely obscure visibility when sprayed on the windshield and may cause loss of vehicle control resulting in an accident. Engine coolant may also cause damage to paint and body trim.
NOTICE To prevent damage to engine parts, put a thick towel around the engine coolant cap and/or inverter coolant cap before refilling the coolant to prevent the coolant from overflowing into engine parts, such as the alternator.
09
9-21
Checking the brake fluid level
OTMA090005
Check the fluid level in the reservoir periodically. The fluid level should be between MAX and MIN marks on the side of the reservoir. Before removing the reservoir cap and adding brake fluid, clean the area around the reservoir cap thoroughly to prevent brake fluid contamination. If the level is low, add the specified brake fluid to the MAX level. The level will fall with accumulated mileage. This is a normal condition associated with the wear of the brake linings. If the fluid level is excessively low, we recommend that the brake system be checked by an authorized HYUNDAI dealer.
WARNING If the brake system requires frequent additions of fluid this could indicate a leak in the brake system. We recommend that the vehicle be inspected by an authorized HYUNDAI dealer.
WARNING Do not allow brake fluid to come in contact with your eyes. If brake fluid comes in contact with your eyes, flush your eyes with clean water for at least 15 minutes and get immediate medical attention.
NOTICE Do not allow brake fluid to contact
the vehicles body paint, as paint damage will result.
Brake fluid, which has been exposed to open air for an extended time should NEVER be used as its quality cannot be guaranteed. It should be disposed of properly.
Do not use the wrong kind of brake fluid. A few drops of mineral based oil, such as engine oil, in your brake system can damage brake system parts.
Information Use only the specified brake fluid (refer to Recommended Lubricants and Capacities section in chapter 2).
BRAKE FLUID
Maintenance
9-22
WASHER FLUID Checking the washer fluid level
OTMA090006
Check the fluid level in the washer fluid reservoir and add fluid if necessary. Plain water may be used if washer fluid is not available. However, use washer solvent with antifreeze characteristics in cold climates to prevent freezing.
WARNING To prevent serious injury or death, take the following safety precautions when using washer fluid: Do not use engine coolant or
antifreeze in the washer fluid reservoir. Engine coolant can severely obscure visibility when sprayed on the windshield and may cause loss of vehicle control resulting in an accident or damage to paint and body trim.
Do not allow sparks or flame to contact the washer fluid or the washer fluid reservoir. Washer fluid may contain alcohol and can be flammable.
Do not drink washer fluid and avoid contact with skin. Washer fluid is harmful to humans and animals.
Keep washer fluid away from children and animals.
09
9-23
Filter replacement
OTMA090007
The air cleaner filter can be cleaned for inspection using compressed air. Do not attempt to wash or to rinse it, as water will damage the filter. If soiled, the air cleaner filter must be replaced.
OTMA090008
1. Pull up the air cleaner filter cover (1).
OTMA090023
2. Wipe the inside of the air cleaner. 3. Pull down the lever to the UNLOCK (2)
position.
OTMA090024
4. Replace the air cleaner filter. 5. Reassemble the air cleaner cover in
the reverse order.
Information If the vehicle is operated in extremely dusty or sandy areas, replace the element more often than the usual recommended intervals (refer to Maintenance Under Severe Usage Conditions in this chapter).
NOTICE Do not drive with the air cleaner filter
removed. This will result in excessive engine wear.
When removing the air cleaner filter, be careful that dust or dirt does not enter the air intake, or damage may result.
Use HYUNDAI genuine parts or the equivalent specified for your vehicle. Use of non-genuine parts could damage the air flow sensor.
AIR CLEANER
Maintenance
9-24
Filter inspection The cabin air filter should be replaced according to the Maintenance Schedule. If the vehicle is operated in severely air- polluted cities or on dusty rough roads for a long period, it should be inspected more frequently and replaced sooner. Replace the cabin air filter by following the procedure below and be careful to avoid damaging other components.
Filter replacement
OTM090009
1. Open the glove box and remove the support rod (1).
OTM090010
2. Remove the stoppers on both sides to allow the glove box to hang freely on the hinges.
OTM090011
3. Press and hold the lock on the right side of the cover.
4. Pull out the cover. 5. Replace the cabin air filter. 6. Reassemble in the reverse order of
disassembly.
NOTICE
OHI078055
Install a new cabin air filter in the correct direction with the arrow symbol () facing downwards, to prevent noise and improve effectiveness.
CABIN AIR FILTER
09
9-25
WIPER BLADES Blade inspection Contamination of either the windshield or the wiper blades with foreign matter can reduce the effectiveness of the windshield wipers. Common sources of contamination are insects, tree sap, and hot wax treatments used by some commercial car washes. If the blades are not wiping properly, clean both the window and the blades with a good cleaner or mild detergent, and rinse thoroughly with clean water.
NOTICE To prevent damage to the wiper blades, arms or other components, do not: Use gasoline, kerosene, paint
thinner, or other solvents on or near them.
Attempt to move the wipers manually.
Use non-specified wiper blades.
Information Commercial hot waxes applied by automatic car washes have been known to make the windshield difficult to clean.
Information Wiper blades are consumable items. Normal wear of the wipers may not be covered by your vehicle warranty.
Blade replacement When the wipers no longer clean adequately, the blades may be worn or cracked, and require replacement.
NOTICE To prevent damage to the wiper arms or other components, do not attempt to move the wipers manually.
NOTICE The use of a non-specified wiper blade could result in wiper malfunction and failure.
NOTICE In order to prevent damage to the
hood and the wiper arms, the wiper arms should only be lifted when in the top wiping position.
Always return the wiper arms to the windshield before driving.
Maintenance
9-26
Front windshield wiper service positions
OTM090012
This vehicle has a hidden wiper design which means that the wipers cannot be lifted when they are in their bottom resting position. 1. Within 20 seconds of turning off the
engine, lift and hold the wiper lever up to the MIST (or down to the V) position for about 2 seconds until the wipers move to the top wipe position.
2. At this time you can lift the wipers off the windshield.
3. Gently put the wipers back down onto the windshield.
4. Turn the wipers to any ON position to return the wipers to the bottom resting position.
Type A
OHI078075
OHI078076
1. Lift up the wiper blade clip. Then lift up the wiper blade.
2. While pushing the lock (1), pull down the wiper blade (2).
OHI078077
3. Remove the wiper blade from the wiper arm.
4. Install a new wiper blade assembly in the reverse order of removal.
5. Return the wiper arm on the windshield.
09
9-27
Type B
OTM090039
1. Raise the wiper arm.
OTM090040
2. Lift up the wiper blade clip. Then pull down the blade assembly and remove it.
OTM090041
3. Install the new blade assembly in the reverse order of removal.
4. Return the wiper arm on the windshield.
Rear window wiper blade replacement
OOSH089025L
1. Raise the wiper arm and then rotate the wiper blade assembly (1).
2. Pull out the wiper blade assembly (2).
OOSH089026L
3. Install the new blade assembly by inserting the center part into the slot in the wiper arm until it clicks into place (3).
4. Make sure the blade assembly is installed firmly by trying to pull it slightly.
5. Rotate back the blade assembly so that it aligns with the wiper arm.
To prevent damage to the wiper arms or other components, we recommend that you have the wiper blades replaced by an authorized HYUNDAI dealer.
Maintenance
9-28
WARNING To prevent SERIOUS INJURY or DEATH to you or bystanders, always follow these precautions when working near or handling the battery:
Always read and follow instructions carefully when handling a battery.
Wear eye protection designed to protect the eyes from acid splashes.
Keep all flames, sparks, or smoking materials away from the battery.
Hydrogen is always present in battery cells, is highly combustible, and may explode if ignited. Keep batteries out of reach of children.
Batteries contain sulfuric acid which is highly corrosive. Do not allow acid to contact your eyes, skin or clothing.
If acid gets into your eyes, flush your eyes with clean water for at least 15 minutes and get immediate medical attention. If acid gets on your skin, thoroughly wash the area. If you feel pain or a burning sensation, get medical attention immediately.
When lifting a plastic-cased battery, excessive pressure on the case may cause battery acid to leak. Lift with a battery carrier or with your hands on opposite corners.
Do not attempt to jump start your vehicle if your battery is frozen.
NEVER attempt to recharge the battery when the vehicles battery cables are connected to the battery.
The electrical ignition system works with high voltage. NEVER touch these components with the engine running or when the Engine Start/ Stop button is in the ON position.
WARNING CALIFORNIA PROPOSITION 65 WARNING Battery posts, terminals, and related accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer, birth defects and reproductive harm. Batteries also contain other chemicals known to the State of California to cause cancer. Wash hands after handling.
NOTICE When you do not use the vehicle for a
long time in a low temperature area, disconnect the battery and keep it indoors.
Always charge the battery fully to prevent battery case damage in low temperature areas.
NOTICE If you connect unauthorized electronic devices to the battery, the battery may be discharged. Never use unauthorized devices.
BATTERY
09
9-29
For best battery service
OTMA090009
Keep the battery securely mounted. Keep the battery top clean and dry. Keep the terminals and connections
clean, tight, and coated with petroleum jelly or terminal grease.
Rinse any spilled electrolyte from the battery immediately with a solution of water and baking soda.
If the vehicle is not going to be used for an extended time, disconnect the battery cables.
Information To check the batteries, open the cover (B). For 7-seater, the clips (A) must be removed first to open the cover.
Information - For batteries marked with UPPER and LOWER
OHI078084L
If your vehicle is equipped with a battery marked with LOWER (MIN) and UPPER (MAX) on the side, you should check the electrolyte level. The electrolyte level should be between LOWER (MIN) and UPPER (MAX). When the electrolyte level is low, add distilled (or de-mineralized) water. (Never add sulfuric acids or other electrolyte). Be careful not to spill distilled (or demineralized) water over the battery surface or other adjacent components. Also, do not overfill the battery cells. If not, it may corrode the battery or other components. Finally, securely close the cell cap. However, we recommend you to contact an authorized HYUNDAI dealer for better battery service.
Maintenance
9-30
Battery capacity label Type A
OTM090063L
Type B
OTM090064L
1. MF68L-DIN : The HYUNDAI model name of battery
2. 12V : The nominal voltage 3. 68Ah (20HR) : The nominal capacity
(in Ampere hours) 4. RC 110min : The nominal capacity (in
Ampere hours) 5. 600A : The cold-test current in
amperes by SAE/EN
Battery recharging By battery charger Your vehicle has a maintenance-free, calcium-based battery. If the battery becomes discharged
over a short time (because, for example, the headlamps or interior lights were left on while the vehicle was not in use), recharge it by slow charging (trickle) for 10 hours.
If the battery gradually discharges because of high electrical load while the vehicle is being used, recharge it at 20-30A for two hours.
WARNING Always follow these instructions when recharging your vehicles battery to avoid the risk of SERIOUS INJURY or DEATH from explosions or acid burns: Before performing maintenance or
recharging the battery, turn off all accessories and stop the engine.
Keep all flames, sparks, or smoking materials away from the battery.
Always work outdoors or in an area with plenty of ventilation.
Wear eye protection when checking the battery during charging.
The battery must be removed from the vehicle and placed in a well ventilated area.
Watch the battery during charging, and stop or reduce the charging rate if the battery cells begin boiling violently.
09
9-31
The negative battery cable must be removed first and installed last when the battery is disconnected. Disconnect the battery charger in the following order: 1. Turn off the battery charger main
switch. 2. Unhook the negative clamp from
the negative battery terminal. 3. Unhook the positive clamp from
the positive battery terminal. We recommend that you use
batteries for replacement from an authorized HYUNDAI dealer.
NOTICE AGM battery (if equipped) Absorbent Glass Matt (AGM)
batteries are maintenance-free and we recommend that the AGM battery be serviced by an authorized HYUNDAI dealer. For charging your AGM battery, use only fully automatic battery chargers that are specially developed for AGM batteries.
When replacing the AGM battery, we recommend that you use parts for replacement from an authorized HYUNDAI dealer.
Do not open or remove the cap on top of the battery. This may cause leaks of internal electrolyte that could result in severe injury.
By jump starting After a jump start from a good battery, drive the vehicle for 20-30 minutes before it is shutoff. The vehicle may not restart if you shut it off before the battery had a chance to adequately recharge. See Jump Starting in chapter 6 for more information on jump starting procedures.
Information An inappropriately disposed battery can be harmful to the environment and human health. Dispose of the battery according to your local law(s) or regulation.
Reset items The following items may need to be reset after the battery has been discharged or the battery has been disconnected. Auto up/down window (see chapter 5) Sunroof (see chapter 5) Trip computer (see chapter 5) Climate control system (see chapter 5) Driver position memory system (see
chapter 5) Clock (see chapter 5) Infotainment system (see
infotainment system manual)
Maintenance
9-32
WARNING Tire failure may cause loss of vehicle control resulting in an accident. To reduce risk of SERIOUS INJURY or DEATH, take the following precautions: Inspect your tires monthly for proper
inflation as well as wear and damage. The recommended cold tire pressure
for your vehicle can be found in this manual and on the tire label located on the drivers side center pillar. Always use a tire pressure gauge to measure tire pressure. Tires with too much or too little pressure wear unevenly causing poor handling.
Check the pressure of the spare every time you check the pressure of the other tires on your vehicle.
Replace tires that are worn, show uneven wear, or are damaged. Worn tires can cause loss of braking effectiveness, steering control, or traction.
ALWAYS replace tires with the same size, type, construction and tread pattern as each tire that was originally supplied with this vehicle. Using tires and wheels other than the recommended sizes could cause unusual handling characteristics, poor vehicle control, or negatively affect your vehicles Anti-Lock Brake System (ABS) resulting in a serious accident.
Tire care For proper maintenance, safety, and maximum fuel economy, you must always maintain recommended tire inflation pressures and stay within the load limits and weight distribution recommended for your vehicle.
OTM078063L
All specifications (sizes and pressures) can be found on a label attached to the drivers side center pillar.
Recommended cold tire inflation pressures All tire pressures (including the spare) should be checked when the tires are cold. Cold tires means the vehicle has not been driven for at least three hours or driven less than 1 mile (1.6km). Warm tires normally exceed recommended cold tire pressures by 4 to 6 psi (28 to 41 kPa). Do not release air from warm tires to adjust the pressure or the tires will be under-inflated. For recommended inflation pressure, refer to Tire and Wheels section in chapter 2.
TIRES AND WHEELS
09
9-33
WARNING Recommended pressures must be maintained for the best ride, vehicle handling, and minimum tire wear. Over-inflation or under-inflation can reduce tire life, adversely affect vehicle handling, and lead to sudden tire failure that could result in loss of vehicle control resulting in an accident. Severe under-inflation can lead to severe heat build-up, causing blowouts, tread separation and other tire failures that can result in the loss of vehicle control resulting in an accident. This risk is much higher on hot days and when driving for long periods at high speeds.
CAUTION Under-inflation results in excessive
wear, poor handling and reduced fuel economy. Wheel deformation is also possible. Keep your tire pressures at the proper levels. If a tire frequently needs refilling, we recommend it be checked by an authorized HYUNDAI dealer.
Over-inflation produces a harsh ride, excessive wear at the center of the tire tread, and a greater possibility of damage from road hazards.
Check tire inflation pressure Check your tires, including the spare tire, once a month or more.
How to check Use a good quality tire pressure gauge to check tire pressure. You can not tell if your tires are properly inflated simply by looking at them. Radial tires may look properly inflated when they are under- inflated. Remove the valve cap from the tire valve stem. Press the tire gauge firmly onto the valve to get a pressure measurement. If the cold tire inflation pressure matches the recommended pressure on the tire and loading information label, no further adjustment is necessary. If the pressure is low, add air until you reach the recommended pressure. Make sure to put the valve caps back on the valve stems. Without the valve cap, dirt or moisture could get into the valve core and cause air leakage. If a valve cap is missing, install a new one as soon as possible. If you overfill the tire, release air by pushing on the metal stem in the center of the tire valve. Recheck the tire pressure with the tire gauge. Be sure to put the valve caps back on the valve stems. Without the valve cap, dirt or moisture could get into the valve core and cause air leakage. If a valve cap is missing, install a new one as soon as possible.
Maintenance
9-34
Tire rotation To equalize tread wear, HYUNDAI recommends that the tires be rotated according to the maintenance schedule or sooner if irregular wear develops. During rotation, check the tires for correct balance. When rotating tires, check for uneven wear and damage. Abnormal wear is usually caused by incorrect tire pressure, improper wheel alignment, out-of- balance wheels, severe braking or severe cornering. Look for bumps or bulges in the tread or side of the tire. Replace the tire if you find any of these conditions. Replace the tire if fabric or cord is visible. After rotation, be sure to bring the front and rear tire pressures to specification and check wheel bolt tightness (proper torque is 101~116 lbf.ft [14~16 kgf.m]).
OHI078078
Disc brake pads should be inspected for wear whenever tires are rotated.
Information The outside and inside of the unsymmetrical tire is distinguishable. When installing an unsymmetrical tire, be sure to install the side marked outside face the outside. If the side marked inside is installed on the outside, it will have a negative effect on vehicle performance.
WARNING Do not use the compact spare tire for
tire rotation. Do not mix bias ply and radial ply
tires under any circumstances. This may cause unusual handling characteristics that may cause loss of vehicle control resulting in an accident.
09
9-35
Wheel alignment and tire balance The wheels on your vehicle were aligned and balanced carefully at the factory to give you the longest tire life and best overall performance. In most cases, you will not need to have your wheels aligned again. However, if you notice unusual tire wear or your vehicle pulling one way or the other, the alignment may need to be reset. If you notice your vehicle vibrating when driving on a smooth road, your wheels may need to be rebalanced.
NOTICE Incorrect wheel weights can damage your vehicles aluminum wheels. Use only approved wheel weights.
Tire replacement
Tread wear indicator
OHI078080
If the tire is worn evenly, a tread wear indicator will appear as a solid band across the tread. This shows there is less than 1/16 inch (1.6mm) of tread left on the tire. Replace the tire when this happens. Do not wait for the band to appear across the entire tread before replacing the tire.
WARNING To reduce the risk of DEATH or SERIOUS INJURY: Replace tires that are worn, show
uneven wear, or are damaged. Worn tires can cause loss of braking effectiveness, steering control, and traction.
Always replace tires with the same size as each tire that was originally supplied with this vehicle. Using tires and wheels other than the recommended sizes could cause unusual handling characteristics, poor vehicle control, or negatively affect your vehicles Anti-Lock Brake System (ABS) resulting in a serious accident.
When replacing tires (or wheels), it is recommended to replace the two front or two rear tires (or wheels) as a pair. Replacing just one tire can seriously affect your vehicles handling.
Tires degrade over time, even when they are not being used. Regardless of the remaining tread, HYUNDAI recommends that tires be replaced after six (6) years of normal service.
Heat caused by hot climates or frequent high loading conditions can accelerate the aging process. Failure to follow this warning may cause sudden tire failure, which could lead to a loss of vehicle control resulting in an accident.
Maintenance
9-36
Compact spare tire replacement (if equipped) A compact spare tire has a shorter tread life than a regular size tire. Replace it when you can see the tread wear indicator bars on the tire. The replacement compact spare tire should be the same size and design tire as the one provided with your new vehicle and should be mounted on the same compact spare tire wheel. The compact spare tire is not designed to be mounted on a regular size wheel, and the compact spare tire wheel is not designed for mounting a regular size tire.
WARNING The original tire should be repaired or replaced as soon as possible to avoid failure of the spare and loss of vehicle control resulting in an accident. The compact spare tire is for emergency use only. Do not operate your vehicle over 50 mph (80 km/h) when using the compact spare tire.
Wheel replacement When replacing the metal wheels for any reason, make sure the new wheels are equivalent to the original factory units in diameter, rim width and offset.
Tire traction Tire traction can be reduced if you drive on worn tires, tires that are improperly inflated or on slippery road surfaces. Tires should be replaced when tread wear indicators appear. To reduce the possibility of losing control, slow down whenever there is rain, snow or ice on the road.
Tire maintenance In addition to proper inflation, correct wheel alignment helps to decrease tire wear. If you find a tire is worn unevenly, have your dealer check the wheel alignment. When you have new tires installed, make sure they are balanced. This will increase vehicle ride comfort and tire life. Additionally, a tire should always be rebalanced if it is removed from the wheel.
09
9-37
Tire sidewall labeling This information identifies and describes the fundamental characteristics of the tire and also provides the tire identification number (TIN) for safety standard certification. The TIN can be used to identify the tire in case of a recall.
OHI078081
1. Manufacturer or brand name Manufacturer or brand name is shown.
2. Tire size designation A tires sidewall is marked with a tire size designation. You will need this information when selecting replacement tires for your car. The following explains what the letters and numbers in the tire size designation mean.
Example tire size designation: (These numbers are provided as an example only; your tire size designator could vary depending on your vehicle.) 235/60R18 102H
235 - Tire width in millimeters. 60 - Aspect ratio. The tires section
height as a percentage of its width. R - Tire construction code (Radial). 18 - Rim diameter in inches. 102 - Load Index, a numerical code
associated with the maximum load the tire can carry.
H - Speed Rating Symbol. See the speed rating chart in this section for additional information.
Wheel size designation Wheels are also marked with important information that you need if you ever have to replace one. The following explains what the letters and numbers in the wheel size designation mean. Example wheel size designation: 7.5J X 18 7.5 - Rim width in inches. J - Rim contour designation. 18 - Rim diameter in inches.
Maintenance
9-38
Tire speed ratings The chart below lists many of the different speed ratings currently being used for passenger vehicle tires. The speed rating is part of the tire size designation on the sidewall of the tire. This symbol corresponds to that tires designed maximum safe operating speed.
Speed Rating Symbol Maximum Speed
S 112 mph (180 km/h) T 118 mph (190 km/h) H 130 mph (210 km/h) V 149 mph (240 km/h) W 168 mph (270 km/h) Y 186 mph (300 km/h)
3. Checking tire life (TIN : Tire Identification Number)
Any tires that are over six years old, based on the manufacturing date, (including the spare tire) should be replaced by new ones. You can find the manufacturing date on the tire sidewall (possibly on the inside of the wheel), displaying the DOT Code. The DOT Code is a series of numbers on a tire consisting of numbers and English letters. The manufacturing date is designated by the last four digits (characters) of the DOT code.
DOT : XXXX XXXX OOOO The front part of the DOT shows a plant code number, tire size and tread pattern and the last four numbers indicate week and year manufactured. For example: DOT XXXX XXXX 1520 represents that the tire was produced in the 15th week of 2020.
4. Tire ply composition and material The number of layers or plies of rubber-coated fabric in the tire. Tire manufacturers also must indicate the materials in the tire, which include steel, nylon, polyester, and others. The letter R means radial ply construction; the letter D means diagonal or bias ply construction; and the letter B means belted-bias ply construction.
5. Maximum permissible inflation pressure
This number is the greatest amount of air pressure that should be put in the tire. Do not exceed the maximum permissible inflation pressure. Refer to the Tire and Loading Information label for recommended inflation pressure.
6. Maximum load rating This number indicates the maximum load in kilograms and pounds that can be carried by the tire. When replacing the tires on the vehicle, always use a tire that has the same load rating as the factory installed tire.
09
9-39
7. Uniform tire quality grading Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width. For example: TREADWEAR 200 TRACTION AA TEMPERATURE A
Tread wear The tread wear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150 would wear one-and-a-half times (1) as well on the government course as a tire graded 100. The relative performance of tires depends upon the actual conditions of their use, however, and may depart significantly from the norm due to variations in driving habits, service practices and differences in road characteristics and climate. These grades are molded on the sidewalls of passenger vehicle tires. The tires available as standard or optional equipment on your vehicle may vary with respect to grade.
Traction - AA, A, B & C The traction grades, from highest to lowest, are AA, A, B and C. Those grades represent the tires ability to stop on wet pavement as measured under controlled conditions on specified government test surfaces of asphalt and concrete. A tire marked C may have poor traction performance.
WARNING The traction grade assigned to this tire is based on straight ahead braking traction tests, and does not include acceleration, cornering, hydroplaning, or peak traction characteristics.
Temperature - A, B & C The temperature grades are A (the highest), B and C representing the tires resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure. Grades B and A represent higher levels of performance on the laboratory test wheel than the minimum required by law.
Maintenance
9-40
WARNING The temperature grade for this tire is established for a tire that is properly inflated and not overloaded. Excessive speed, under-inflation, over-inflation, or excessive loading, either separately or in combination, can cause heat build- up and possible sudden tire failure. This may cause loss of vehicle control resulting in an accident.
Low aspect ratio tires (if equipped) The aspect ratio is lower than 50 on low aspect ratio tires. Because low aspect ratio tires are optimized for handling and braking, their sidewall is a little stiffer than a standard tire. Also low aspect ratio tires tend to be wider and consequently have a greater contact patch with the road surface. In some instances they may generate more road noise compared with standard tires.
CAUTION The side wall of a low aspect ratio tire is shorter than the normal one. Thus, the low-aspect wheel and tire are easily damaged. Follow the below instructions. When driving on a rough road or
driving off a road, be careful not to damage the tires and wheels. After driving, inspect the tires and wheels.
When passing over a pothole, speed bump, manhole, or curb stone, drive the vehicle slowly so as not to damage the tires and wheels.
When there is an impact on a tire, inspect the tire condition. Or, you can contact an authorized HYUNDAI dealer.
Inspect the tire condition and pressure every 1,800 miles (3,000 km) to prevent tire damage.
It is difficult to recognize a tire damage only with your eyes. When there is a slight hint of a tire damage, check and replace the tire to prevent the damage caused by air leakage.
When a tire is damaged while driving on a rough road, off a road, or over obstacles, such as a pothole, manhole, or curb stone, your warranty does not cover the damage.
The tire information is specified on the tire side wall.
09
9-41
Blade type
Cartridge type
Multi type
Normal Blown
Normal Blown
Normal Blown
OTM078035
A vehicles electrical system is protected from electrical overload damage by fuses. This vehicle has 5 fuse panels, one located in the drivers side panel bolster, the other in the engine compartment. If any of your vehicles lights, accessories, or controls do not work, check the appropriate circuit fuse. If a fuse has blown, the element inside the fuse will be melted or broken. If the electrical system does not work, first check the drivers side fuse panel. Before replacing a blown fuse, turn the engine and all switches off, and then disconnect the negative battery cable. Always replace a blown fuse with one of the same rating. If the replacement fuse blows, this indicates an electrical problem. Avoid using the system involved. We recommend that you immediately consult an authorized HYUNDAI dealer.
WARNING NEVER replace a fuse with anything but another fuse of the same rating. A higher capacity fuse could cause
damage and possibly cause a fire. Do not install a wire or aluminum
foil instead of the proper fuse - even as a temporary repair. It may cause extensive wiring damage and possibly a fire.
NOTICE Do not use a screwdriver or any other metal object to remove fuses because it may cause a short circuit and damage the system.
FUSES
Maintenance
9-42
Instrument panel fuse replacement Drivers side
OTM090013
1. Turn the vehicle off. 2. Turn all other switches off. 3. Open the fuse panel cover. 4. Refer to the label on the inside of
the fuse panel cover to locate the suspected fuse location.
OTMA090010
5. Pull the suspected fuse straight out. Use the removal tool (1) provided in the engine compartment fuses panel cover.
6. Check the removed fuse; replace it if it is blown. Spare fuses are provided in the instrument panel fuse panels (or in the engine compartment fuse panel).
7. Push in a new fuse of the same rating, and make sure it fits tightly in the clips. If it fits loosely, we recommend that you consult an authorized HYUNDAI dealer.
In an emergency, if you do not have a spare fuse, use a fuse of the same rating from a circuit you may not need for operating the vehicle, such as the cigarette lighter fuse. If the headlamps or other electrical components do not work and the fuses are undamaged, check the fuse panel in the engine compartment. If a fuse is blown, it must be replaced with the same rating.
09
9-43
Engine compartment panel fuse replacement Blade fuse / Cartridge fuse Blade type fuse
OTMA090011
Cartridge type fuse
OTMA090012
1. Turn the vehicle off. 2. Turn all other switches off. 3. Remove the fuse panel cover by
pressing the tap and pulling up. 4. Check the removed fuse; replace it
if it is blown. To remove or insert the fuse, use the fuse puller in the engine compartment fuse panel.
5. Push in a new fuse of the same rating, and make sure it fits tightly in the clips. If it fits loosely, we recommend that you consult an authorized HYUNDAI dealer.
NOTICE After checking the fuse panel in the engine compartment, securely install the fuse panel cover. You may hear a clicking sound if the cover is securely latched. If it is not securely latched, electrical failure may occur from water contact.
Multi fuse Multi type
OTMA090013
If the multi fuse or midi fuse is blown, we recommend that you consult an authorized HYUNDAI dealer.
Maintenance
9-44
Fuse/relay panel description Instrument panel fuse panel
OTM090019
Inside the fuse/relay box cover, you can find the fuse/relay label describing fuse/ relay names and ratings.
Information Not all fuse panel descriptions in this manual may be applicable to your vehicle; the information is accurate at the time of printing. When you inspect the fuse box on your vehicle, refer to the fuse box label.
OTMA090026
09
9-45
Instrument panel fuse panel
Fuse Name Fuse
Rating Circuit Protected
MODULE 4 7.5A Data Link Connector, Stop Lamp Switch, Driver Area Unit
AIR BAG 1 15A SRS Control Module, Passenger Occupant Detection Sensor
BRAKE SWITCH 7.5A IBU, Stop Lamp Switch
MODULE 9 15A
Front A/C Control Module, Driver Door Area Unit, Power Tailgate Module, Low DC-DC Converter, Rear Occupant Alert (ROA) Sensor, Driver IMS Control Module, Head-Up Display, Driver/Passenger Power Outside Mirror
MODULE 10 10A Blind-Spot Collision Warning Unit LH/RH, Front Wireless Charger
AIR BAG IND. 10A Overhead Console Assembly, Instrument Cluster
IBU 1 7.5A IBU
MODULE 2 7.5A
AC Inverter Outlet, AC Inverter Module, Front Air Ventilation Control Module, Front Seat Warmer Control Module, 2nd Seat Warmer LH/ RH Control Module
MODULE 8 7.5A Hazard Switch, Key Solenoid, Mood Lamp, Rain Sensor, Mood Lamp Unit, Mood Lamp #1/#2
S/HEATER FRT 20A Data Link Connector, Front Air Ventilation Control Module, Front Seat Warmer Control Module
AIR BAG 2 15A SRS Control Module
E-SHIFTER1 10A Electronic Shift Dial
E-SHIFTER2 7.5A Electronic Shift Dial
MODULE 5 7.5A
Lane Departure Warning Unit, Crash Pad Switch, IBU, Console Switch, 4WD ECM, Surround View Monitor Unit, Upper Console Switch, Parking Collision Avoidance Assist Unit
IBU 2 15A IBU, Ignition Switch, BLE (Bluetooth Low Energy) Unit, IAU (Identity Authentication Unit), Driver/Passenger Smart Key Outside Handle
SUNROOF 2 20A Panorama Sunroof
MODULE 1 7.5A IBU, IAU (Identity Authentication Unit)
P/WINDOW RH 25A Passenger Safety Power Window Module, Passenger Power Window Switch, Rear Power Window Switch RH, Rear Safety Power Window RH
Maintenance
9-46
Instrument panel fuse panel
Fuse Name Fuse
Rating Circuit Protected
ISG 15A Low DC-DC Converter (AMP), Instrument Cluster, Front A/C Control Module, A/V & Navigation Head Unit, Head Up Display, Audio
RR SEAT(LH) 25A 2nd Seat Warmer LH Control Module, 2nd Seat LH Folding Actuator
CLUSTER 7.5A Instrument Cluster, Head Up Display
MDPS 10A MDPS Unit MDPS(Motor Driven Power Steering) is the same as
EPS(Electric Power Steering).
A/C 7.5A E/R Junction Block (Blower Relay, PTC Heater Relay)
CHILD LOCK 15A ICM Relay Box (Child Lock/Unlock Relay)
DOOR LOCK 20A Door Lock Relay, Door Unlock Relay, Tailgate Relay, Driver Door Unlock Relay
SUNROOF 1 20A Panorama Sunroof
P/WINDOW LH 25A Driver Safety Power Window Module, Rear Power Window Switch LH, Rear Safety Power Window LH
MODULE 3 7.5A IBU
MODULE 6 7.5A Audio, A/V & Navigation Head Unit, A/V & Navigation Keyboard, Front A/C Control Module, Front Wireless Charger, Electro Chromic Mirror, Low DC-DC Converter
WASHER 15A Multifunction Switch
RR SEAT(RH) 25A 2nd Seat Warmer RH Control Module, 2nd Seat RH Folding Actuator
WIPER RR 15A Rear Wiper Relay, Rear Wiper Motor
AMP 25A Low DC-DC Converter (With AMP)
ACC 7.5A IBU, Front USB Charger, Low DC-DC Converter, Rear USB Charger LH/RH, IAU (Identity Authentication Unit)
P/SEAT (PASS) 30A Passenger Seat Manual Switch
P/SEAT (DRV) 30A Driver IMS Control Module, Driver Seat Manual Switch
09
9-47
Engine compartment fuse panel (Engine room junction block)
OTMA090014
Inside the fuse/relay box cover, you can find the fuse/relay label describing fuse/ relay names and ratings.
Information Not all fuse panel descriptions in this manual may be applicable to your vehicle; the information is accurate at the time of printing. When you inspect the fuse panel in your vehicle, refer to the fuse panel label.
OTMA090025
Maintenance
9-48
Engine compartment fuse panel (Engine room junction block)
Type Fuse Name Fuse
Rating Circuit Protected
MULTI FUSE 1 (10P)
COOLING FAN1 80A [BLDC 600W] Cooling Fan Controller
COOLING FAN2 60A [BLDC 400W] Cooling Fan Controller
B+4 50A ICU Junction Block (Fuse - MODULE8, SUNROOF1, AMP, P/WINDOW RH, S/HEATER DRV/PASS)
B+2 50A ICU Junction Block (IPS 8 SPOC+/IPS 10/IPS 11/ IPS 13/IPS 14/IPS 15)
B+3 50A ICU Junction Block (Fuse - E-SHIFTER1, P/ SEAT (DRV, P/SEAT (PASS), P/WINDOW LH, RR SEAT(LH))
BLOWER 40A Blower Relay
IG2 40A Start Relay, PCB Block (PDM (IG2) Relay)
ABS 2 30A ESC Module
MULTI FUSE 2 (10P)
MDPS 100A MDPS Unit
ABS 3 60A ESC Module
B+6 60A PCB Block (B+)
DCT 60A TCM
E-CVVT1 50A PCB Block (E-CVVT Relay)
REAR HEATED 40A Rear Heated Relay
INVERTER 40A AC Inverter Module
E-SHIFTER 1 40A SCU
FUSE
HEATED MIRROR
10A Rear Heated Relay, Driver/Passenger Outside Mirror, Front A/C Control Module
E-CVVT3 20A PCM, PCB Block (E-CVVT Relay)
E-CVVT2 20A PCM, PCB Block (E-CVVT Relay)
A/C2 10A Blower Relay, Front A/C Control Module
VACUUM PUMP2
10A ESC Module, Vacuum Pump Relay, Vacuum Pump
B+5 50A ICU Junction Block (Fuse - DOOR LOCK, IBU1, IBU2, BRAKE SWITCH, CHILD LOCK, RR SEAT(RH), SUNROOF2)
EOP2 60A [G4KP] Electronic Oil Pump
09
9-49
Engine compartment fuse panel (Engine room junction block)
Type Fuse Name Fuse Rating Circuit Protected
FUSE
B+1 50A ICU Junction Block (IPS 1 SPOC+/IPS 2/IPS 3/IPS 5/IPS 6/IPS 7/Long Term Load Latch Relay, Short Term Load Latch Relay)
PTC HEATER 50A PTC Heater Relay
TRAILER3 30A Trailer Module
POWER TAIL GATE 30A Power Tail Gate Unit
TRAILER2 30A Trailer Module
FUEL PUMP 20A Fuel Pump Relay
AMS 10A Battery Sensor
VACUUM PUMP1 20A Vacuum Pump Relay
4WD 20A 4WD ECM
E-SHIFTER2 10A SCU
TRAILER1 30A Trailer Module
Maintenance
9-50
Engine compartment fuse panel (PCB block)
Fuse Name Fuse
Rating Circuit Protected
IG1 40A PDM (IG1) Relay
TCU2 10A TCM
SENSOR3 20A Injector #2/#4
SENSOR1 10A Injector #1/#3
ECU3 10A PCM
EOP3 10A [G4KN] Electronic Oil Pump
POWER OUTLET1 20A Luggage Power Outlet
WIPER2 10A IBU, PCM
HORN 15A Horn Relay
ABS4 10A ESC Module
ECU2 20A PCM
SENSOR2 10A
[G4KN] Canister Close Valve, Cooling Fan Controller, Variable Oil Pump Solenoid Valve, Purge Control Solenoid Valve, Oil Control Valve, Variable Intake Solenoid Valve, A/ CON Relay [G4KP] Canister Close Valve, Cooling Fan Controller, Variable Oil Pump Solenoid Valve, Purge Control Solenoid Valve, Oil Control Valve, RCV Control Solenoid Valve, A/CON Relay
SENSOR4 15A Oxygen Sensor (Up/Down)
IGN COIL 20A Ignition Coil #1/#2/#3/#4
ACC 20A ICU Junction Block (Fuse - ACC)
POWER OUTLET2
20A Front Power Outlet
WIPER FRT1 30A Front Wiper Motor, Front Wiper (Low) Relay
E-SHIFTER3 10A SCU
FCA 10A Front Radar Unit
ECU1 15A PCM
A/C1 10A TCM
TCU1 20A PCM
REAR HEATED2
10A E/R Junction Block (Rear Heated Relay)
09
9-51
We recommend that you consult an authorized HYUNDAI dealer to replace most vehicle light bulbs. It is difficult to replace vehicle light bulbs because other parts of the vehicle must be removed before you can get to the bulb. This is especially true for removing the headlamp assembly to get to the bulb(s). Removing/installing the headlamp assembly can result in damage to the vehicle.
WARNING Prior to working on a light, depress
the foot brake, shift to P (Park), apply the parking brake, press the Engine Start/Stop button to the OFF position and take the key with you when leaving the vehicle to avoid sudden movement of the vehicle and to prevent possible electric shock.
Be aware the bulbs may be hot and may burn your fingers.
NOTICE Be sure to replace the burned-out bulb with one of the same wattage rating. Otherwise, it may cause damage to the fuse or electrical wiring system.
NOTICE To prevent damage, do not clean the headlamp lens with chemical solvents or strong detergents.
Information - Headlamp desiccant (if equipped)
This vehicle is equipped with desiccant to reduce fogging inside the headlamp due to moisture. The desiccant is consumable and its performance may change based on the used period or environment. If fogging inside the headlamp due to moisture continues for a long time, we recommend that you consult an authorized HYUNDAI dealer.
Information The headlamp and tail lamp lenses could appear frosty if the vehicle is washed after driving or the vehicle is driven at night in wet weather. This condition is caused by temperature difference between the lamp inside and outside and, it does not indicate a problem with your vehicle. When moisture condenses in the lamp, it will be removed after driving with the headlamp on. The removable level may differ depending on lamp size, lamp position and environmental condition. However, if moisture is not removed, we recommend that your vehicle is inspected by an authorized HYUNDAI dealer.
LIGHT BULBS
Maintenance
9-52
Information A normally functioning lamp may
flicker momentarily to stabilize the vehicles electrical control system. However, if the lamp goes out after flickering momentarily, or continues to flicker, we recommend the system be checked by an authorized HYUNDAI dealer.
The position lamp may not turn on when the position lamp switch is turned on, but the position lamp and headlamp switch may turn on when the headlamp switch is turned on. This may be caused by network failure or vehicle electrical control system malfunction. If this occurs, we recommend the system be checked by an authorized HYUNDAI dealer.
Information The headlamp aiming should be adjusted after an accident or after the headlamp assembly is reinstalled.
Information Traffic Change (For Europe) The low beam light distribution is asymmetric. If you go abroad to a country with opposite traffic direction, this asymmetric part will dazzle oncoming car driver. To prevent dazzle, ECE regulation demand several technical solutions (ex. automatic change system, adhesive sheet, down aiming). This headlamps are designed not to dazzle opposite drivers. So, you need not change your headlamps in a country with opposite traffic direction.
Headlamp, position lamp, turn signal lamp, Daytime Running Light (DRL) replacement Type A
OTMA090019
(1) Headlamp (High) (2) Headlamp (Low) (3) Daytime running light/Position light (4) Turn signal lamp (5) Side marker lamp
Turn signal lamp 1. Engage the parking brake and
disconnect the negative battery cable.
OTM090022
2. Remove wheel guard clips (under the front bumper : 4 pieces).
09
9-53
OTM090035
3. Push the wheel guard aside and remove the bulb socket by turning it counterclockwise.
4. Remove the bulb from the socket by pressing it in and rotating it counterclockwise until the tabs on the bulb align with the slots in the socket. Pull the bulb out of the socket.
5. Install a new bulb by inserting it into the socket and rotating it until it locks into place.
6. Push the socket into the assembly and turn the socket clockwise.
7. Install the wheel guard in the reverse order.
Headlamp (High/Low), Daytime running light, position light (LED) If the LED lamp does not operate, we recommend that you have the vehicle checked by an authorized HYUNDAI dealer.
Type B
OTMA090020
(1) Headlamp (High)/Support Headlamp (2) Headlamp (Low) (3) Support Headlamp (4) Daytime running light/Position light (5) Turn signal lamp (6) Side marker lamp
WARNING
OLMB073042L
Handle halogen bulbs with care. Halogen bulbs contain pressurized gas that will produce flying pieces of glass that could cause injuries if broken.
Wear eye protection when changing a bulb. Allow the bulb to cool down before handling it.
Maintenance
9-54
Always handle them carefully, and avoid scratches and abrasions. If the bulbs are lit, avoid contact with liquids.
Never touch the glass with bare hands. Residual oil may cause the bulb to overheat and burst when lit.
A bulb should be operated only when installed in a headlamp.
If a bulb becomes damaged or cracked, replace it immediately and carefully dispose of it.
Lamps If the LED lamp does not operate, we recommend that you have the vehicle checked by an authorized HYUNDAI dealer.
Side repeater lamp replacement
OTM090023
If the LED lamp (1) does not operate, we recommend that the system be inspected by an authorized HYUNDAI dealer. The LED lamps cannot be replaced as a single unit because it is an integrated unit. The LED lamps has to be replaced with the unit. A skilled technician should check or repair the LED lamp, for it may damage related parts of the vehicle.
Rear combination lamp replacement Type A
OTMA090021
(1) Tail/Stop lamp (2) Tail lamp (3) Turn signal lamp (4) Reverse lamp (5) Side marker lamp
OTM090044
Stop/Tail lamp (Outside), Reverse lamp 1. Turn off the engine. 2. Open the liftgate. 3. Loosen the lamp assembly retaining
screws with a cross-tip screwdriver. 4. Remove the rear combination lamp
assembly from the body of the vehicle.
5. Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly.
09
9-55
OTM090045L
6. Remove the bulb from the socket by pressing it in and rotating it counterclockwise until the tabs on the bulb align with the slots in the socket. Pull the bulb out of the socket.
7. Insert a new bulb by inserting it into the socket and rotating it until it locks into place.
8. Install the socket into the assembly by aligning the tabs on the socket with the slots in the assembly. Push the socket into the assembly and turn the socket clockwise.
9. Reinstall the lamp assembly to the body of the vehicle.
OTM090025
Tail lamp (Inside) 1. Turn off the engine. 2. Open the liftgate. 3. Remove the service cover using a
flat-blade screwdriver. 4. Remove the socket from the
assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly.
OTM090046
5. Remove the bulb from the socket by pressing it in and rotating it counterclockwise until the tabs on the bulb align with the slots in the socket. Pull the bulb out of the socket.
6. Insert a new bulb by inserting it into the socket and rotating it until it locks into place.
Maintenance
9-56
7. Install the socket into the assembly by aligning the tabs on the socket with the slots in the assembly. Push the socket into the assembly and turn the socket clockwise.
8. Reinstall the lamp assembly to the body of the vehicle.
Turn signal lamp If these lamps do not operate, we recommend that you have the vehicle checked by an authorized HYUNDAI dealer.
Type B
OTMA090022
(1) Tail/Stop lamp (2) Stop lamp (3) Turn signal lamp (4) Reverse lamp (5) Side marker lamp
OTM090044
Reverse lamp 1. Turn off the engine. 2. Open the liftgate. 3. Loosen the lamp assembly retaining
screws with a cross-tip screwdriver. 4. Remove the rear combination lamp
assembly from the body of the vehicle.
5. Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly.
09
9-57
OTM090045L
6. Remove the bulb from the socket by pressing it in and rotating it counterclockwise until the tabs on the bulb align with the slots in the socket. Pull the bulb out of the socket.
7. Insert a new bulb by inserting it into the socket and rotating it until it locks into place.
8. Install the socket into the assembly by aligning the tabs on the socket with the slots in the assembly. Push the socket into the assembly and turn the socket clockwise.
9. Reinstall the lamp assembly to the body of the vehicle.
Tail / Stop lamp, Tail lamp, Turn signal lamp If these lamps do not operate, we recommend that you have the vehicle checked by an authorized HYUNDAI dealer.
High mounted stop lamp replacement
OTM090026
If the LED lamp (1) does not operate, we recommend that the system be inspected by an authorized HYUNDAI dealer. The LED lamps cannot be replaced as a single unit because it is an integrated unit. The LED lamps has to be replaced with the unit. A skilled technician should check or repair the LED lamp, for it may damage related parts of the vehicle.
Maintenance
9-58
License plate lamp replacement
OTM090047
1. Using a flat-blade screwdriver, gently pry the lens cover from the lamp housing.
2. Remove the bulb by pulling it straight out.
3. Install a new bulb. 4. Reinstall in the reverse order.
Interior light replacement Map lamp (LED/Bulb type), Room lamp (LED type) Map lamp (LED type)
OTM050247L
Map lamp (Bulb type)
OTM050248L
Room lamp (Personnal lamp)
OTM078014
If the map lamp (LED/Bulb) (1) and the room lamp (LED type) (1) do not operate, we recommend that the system be checked by an authorized HYUNDAI dealer.
09
9-59
Room lamp, Sunvisor lamp, Glove box lamp and Luggage compartment lamp (Bulb type)
1. Using a flat-head screwdriver, gently pry the lens from the interior light housing. 2. Remove the bulb by pulling it straight out. 3. Install a new bulb into the socket. 4. Align the lens tabs with the interior light housing notches and snap the lens into
place.
NOTICE Be careful not to damage the cover, tab, and plastic housing.
Room lamp (Personnal lamp)
OTM090048
Glove box lamp
OTM090030
Sunvisor lamp
OTM090049
Luggage compartment lamp
OTM090029
Maintenance
9-60
Exterior care Exterior general caution It is very important to follow the label directions when using any chemical cleaner or polish. Read all warning and caution statements that appear on the label.
Finish maintenance Washing To help protect your vehicles finish from rust and deterioration, wash it thoroughly and frequently at least once a month with lukewarm or cold water. If you use your vehicle for off-road driving, you should wash it after each off-road trip. Pay special attention to the removal of any accumulation of salt, dirt, mud, and other foreign materials. Make sure the drain holes in the lower edges of the doors and rocker panels are kept clear and clean. Insects, tar, tree sap, bird droppings, industrial pollution and similar deposits can damage your vehicles finish if not removed immediately. Even prompt washing with plain water may not completely remove all these deposits. A mild soap, safe for use on painted surfaces, should be used. After washing, rinse the vehicle thoroughly with lukewarm or cold water. Do not allow soap to dry on the finish.
High-pressure washing When using high-pressure washers,
make sure to maintain sufficient distance from the vehicle. Insufficient clearance or excessive pressure can lead to component damage or water penetration.
Do not spray the camera, sensors or its surrounding area directly with a high pressure washer. Shock applied from high pressure water may cause the device to not operate normally.
Do not bring the nozzle tip close to boots (rubber or plastic covers) or connectors as they may be damaged if they come into contact with high pressure water.
WARNING After washing the vehicle, test the brakes while driving slowly to see if they have been affected by water before getting on the road. If braking performance is impaired, dry the brakes by applying them lightly while maintaining a slow forward speed.
APPEARANCE CARE
09
9-61
NOTICE Do not use strong soap, chemical
detergents or hot water, and do not wash the vehicle in direct sunlight or when the body of the vehicle is warm.
Be careful when washing the side windows of your vehicle.
Especially, with high-pressure water, water may leak through the windows and wet the interior.
To prevent damage to the plastic parts, do not clean with chemical solvents or strong detergents.
NOTICE
OTM090031
Water washing in the engine compartment including high pressure water washing may cause the failure of electrical circuits located in the engine compartment.
Never allow water or other liquids to come in contact with electrical/ electronic components inside the vehicle as this may damage them.
NOTICE Matte paint finish vehicle (if equipped) Automatic car wash which uses rotating brushes should not be used as this can damage the surface of your vehicle. A steam cleaner which washes the vehicle surface at high temperature may result the oil to adhere and leave stains that is difficult to remove. Use a soft cloth (e.g. microfiber towel or sponge) when washing your vehicle and dry with a microfiber towel. When you hand wash your vehicle, you should not use a cleaner that finishes with wax. If the vehicle surface is too dirty (sand, dirt, dust, contaminant, etc.), clean the surface with water before washing the car.
Waxing A good coat of wax is a barrier between your paint and contaminate. Keeping a good coat of wax on your vehicle will help protect it. Wax the vehicle when water will no longer bead on the paint. Always wash and dry the vehicle before waxing. Use a good quality liquid or paste wax, and follow the manufacturers instructions. Wax all metal trim to protect it and to maintain its luster. Removing oil, tar, and similar materials with a spot remover will usually strip the wax from the finish. Be sure to re-wax these areas even if the rest of the vehicle does not yet need waxing.
Maintenance
9-62
NOTICE Wiping dust or dirt off the body with
a dry cloth will scratch the finish. Do not use steel wool, abrasive
cleaners, or strong detergents containing highly alkaline or caustic agents on chrome-plated or anodized aluminum parts. This may result in damage to the protective coating and cause discoloration or paint deterioration.
NOTICE Matte paint finish vehicle (if equipped) Do not use any polish protector such as a detergent, an abrasive and a polish. In case wax is applied, remove the wax immediately using a silicon remover and if any tar or tar contaminant is on the surface use a tar remover to clean. However, be careful not to apply too much pressure on the painted area.
Finish damage repair Deep scratches or stone chips in the painted surface must be repaired promptly. Exposed metal will quickly rust and may develop into a major repair expense.
NOTICE If your vehicle is damaged and requires any metal repair or replacement, be sure the body shop applies anti- corrosion materials to the parts repaired or replaced.
NOTICE Matte paint finish vehicle (if equipped) In case of matte paint finish vehicles, it is impossible to modify only the damaged area and repair of the whole part is necessary. If the vehicle is damaged and painting is required, we recommend that you have your vehicle maintained and repaired by an authorized HYUNDAI dealer. Take extreme care, as it is difficult to restore the quality after the repair.
09
9-63
Bright-metal maintenance To remove road tar and insects, use
a tar remover, not a scraper or other sharp object.
To protect the surfaces of bright metal parts from corrosion, apply a coating of wax or chrome preservative and rub to a high luster.
During winter weather or in coastal areas, cover the bright metal parts with a heavier coating of wax or preservative. If necessary, coat the parts with non-corrosive petroleum jelly or other protective compound.
Underbody maintenance Corrosive materials used for ice and snow removal and dust control may collect on the underbody. If these materials are not removed, accelerated rusting can occur on underbody parts such as the fuel lines, frame, floor pan and exhaust system, even though they have been treated with rust protection. Thoroughly flush the vehicle underbody and wheel openings with lukewarm or cold water once a month, after off-road driving and at the end of each winter. Pay special attention to these areas because it is difficult to see all the mud and dirt. It will do more harm than good to wet down the road grime without removing it. The lower edges of doors, rocker panels, and frame members have drain holes that should not be allowed to clog with dirt; trapped water in these areas can cause rusting.
WARNING After washing the vehicle, test the brakes while driving slowly to see if they have been affected by water. If braking performance is impaired, dry the brakes by applying them lightly while maintaining a slow forward speed.
Aluminum wheel maintenance The aluminum wheels are coated with a clear protective finish. Do not use abrasive cleaner, polishing
compound, solvent, or wire brushes on aluminum wheels.
Clean the wheel when it has cooled. Use only a mild soap or neutral
detergent, and rinse thoroughly with water. Also, clean the wheels after driving on salted roads.
Do not wash the wheels with high- speed car wash brushes.
Do not use any cleaners containing acid or alkaline detergents.
Maintenance
9-64
Corrosion protection Protecting your vehicle from corrosion By using the most advanced design and construction practices to combat corrosion, HYUNDAI produces vehicles of the highest quality. However, this is only part of the job. To achieve the long- term corrosion resistance your vehicle can deliver, the owners cooperation and assistance is also required.
Common causes of corrosion The most common causes of corrosion on your vehicle are: Road salt, dirt and moisture that is
allowed to accumulate underneath the vehicle.
Removal of paint or protective coatings by stones, gravel, abrasion or minor scrapes and dents which leave unprotected metal exposed to corrosion.
High-corrosion areas If you live in an area where your vehicle is regularly exposed to corrosive materials, corrosion protection is particularly important. Some of the common causes of accelerated corrosion are road salts, dust control chemicals, ocean air and industrial pollution.
Moisture breeds corrosion Moisture creates the conditions in which corrosion is most likely to occur. For example, corrosion is accelerated by high humidity, particularly when temperatures are just above freezing. In such conditions, the corrosive material is kept in contact with the vehicle surfaces by moisture that is slow to evaporate. Mud is particularly corrosive because it is slow to dry and holds moisture in contact with the vehicle. Although the mud appears to be dry, it can still retain moisture and promote corrosion. High temperatures can also accelerate corrosion of parts that are not properly ventilated so the moisture can be dispersed. For all these reasons, it is particularly important to keep your vehicle clean and free of mud or accumulations of other materials. This applies not only to the visible surfaces but particularly to the underside of the vehicle.
09
9-65
To help prevent corrosion Keep your vehicle clean The best way to prevent corrosion is to keep your vehicle clean and free of corrosive materials. Attention to the underside of the vehicle is particularly important.
If you live in a high-corrosion area where road salts are used, near the ocean, areas with industrial pollution, acid rain, etc., you should take extra care to prevent corrosion. In winter, hose off the underside of your vehicle at least once a month and be sure to clean the underside thoroughly when winter is over.
When cleaning underneath the vehicle, pay particular attention to the components under the fenders and other areas that are hidden from view. Do a thorough job; just dampening the accumulated mud rather than washing it away will accelerate corrosion rather than prevent it. Water under high pressure and steam are particularly effective in removing accumulated mud and corrosive materials.
When cleaning lower door panels, rocker panels and frame members, be sure that drain holes are kept open so that moisture can escape and not be trapped inside to accelerate corrosion.
Keep your garage dry Dont park your vehicle in a damp, poorly ventilated garage. This creates a favorable environment for corrosion. This is particularly true if you wash your vehicle in the garage or drive it into the garage when it is still wet or covered with snow, ice or mud. Even a heated garage can contribute to corrosion unless it is well ventilated so moisture is dispersed.
Keep paint and trim in good condition Scratches or chips in the finish should be covered with touch-up paint as soon as possible to reduce the possibility of corrosion. If bare metal is showing through, the attention of a qualified body and paint shop is recommended. Bird droppings are highly corrosive and may damage painted surfaces in just a few hours. Always remove bird droppings as soon as possible.
Maintenance
9-66
Interior care Interior general precautions Prevent caustic solutions such as perfume and cosmetic oil, from contacting the interior parts because they may cause damage or discoloration. If they do contact the interior parts, wipe them off immediately. See the instructions for the proper way to clean vinyl.
NOTICE Never allow water or other liquids
to come in contact with electrical/ electronic components inside the vehicle as this may damage them.
When cleaning leather products (steering wheel, seats etc.), use neutral detergents or low alcohol content solutions. If you use high alcohol content solutions or acid/ alkaline detergents, the color of the leather may fade or the surface may get stripped off.
Cleaning the upholstery and interior trim Vinyl (if equipped) Remove dust and loose dirt from vinyl with a whisk broom or vacuum cleaner. Clean vinyl surfaces with a vinyl cleaner.
Fabric (if equipped) Remove dust and loose dirt from fabric with a whisk broom or vacuum cleaner. Clean with a mild soap solution recommended for upholstery or carpets. Remove fresh spots immediately with a fabric spot cleaner. If fresh spots do not receive immediate attention, the fabric can be stained and its color can be affected. Also, its fire-resistant properties can be reduced if the material is not properly maintained.
NOTICE Using anything but recommended cleaners and procedures may affect the fabrics appearance and fire-resistant properties.
09
9-67
Leather (if equipped) Features of seat leather
- Leather is made from the outer skin of an animal, which goes through a special process to be available for use. Since it is a natural product, each part differs in thickness or density. Wrinkles may appear as a natural result of stretching and shrinking depending on the temperature and humidity.
- The seat is made of stretchable fabric to improve comfort.
- The parts contacting the body are curved and the side supporting area is high which provides driving comfort and stability.
- Wrinkles may appear naturally from usage. It is not a fault of the products.
NOTICE Wrinkles or abrasions which appear
naturally from usage are not covered by warranty.
Belts with metallic accessories, zippers or keys inside the back pocket may damage the seat fabric.
Make sure not to wet the seat. It may change the nature of natural leather.
Jeans or clothes which could bleach may contaminate the surface of the seat covering fabric.
Caring for the leather seats - Vacuum the seat periodically to
remove dust and sand on the seat. It will prevent abrasion or damage of the leather and maintain its quality.
- Wipe the natural leather seat cover often with dry or soft cloth.
- Use of proper leather protector may prevent abrasion of the cover and helps maintain the color. Be sure to read the instructions and consult a specialist when using leather coating or protective agent.
- Light colored (beige, cream beige) leather is easily contaminated and the stain is noticeable. Clean the seats frequently.
- Avoid wiping with wet cloth. It may cause the surface to crack.
Cleaning the leather seats - Remove all contaminations
instantly. Refer to instructions below for removal of each contaminant.
- Cosmetic products (sunscreen, foundation, etc.) Apply cleansing cream on a cloth and wipe the contaminated spot. Wipe off the cream with a wet cloth and remove water with a dry cloth.
- Beverages (coffee, soft drink, etc.) Apply a small amount of neutral detergent and wipe until contaminations do not smear.
Maintenance
9-68
- Oil Remove oil instantly with absorbable cloth and wipe with stain remover used only for natural leather.
- Chewing gum Harden the gum with ice and remove gradually.
Handling prime napa leather (if equipped) Try to avoid excessive sunlight and heat exposure. Excessive sunlight and heat exposure naturally fades and dries out napa leather, causing wrinkles and discoloration. If the napa leather is wet with liquid, immediately clean it with lint-free cloth to minimize damage. Do not scratch the napa leather surface with a sharp object. If your napa leather seat is bright colored, it may be contaminated or stained from dyed materials such as jeans.
Interior wooden trim Use a wooden furniture protector (e.g.
wax, coating compound) to clean the interior wooden trim.
Often wipe the interior wooden trim with a lint-free, clean cloth to maintain the unique wooden textures for a longer period of time.
If you spill beverage (e.g. water, coffee) over the interior wooden trim, immediately wipe it with clean, dry cloth.
Sharp objects (e.g. driver, knife), adhesive materials, or tapes may damage the interior wooden trim.
Any strong impacts may damage the interior wooden trim.
If the coating finish over the interior wooden trim is removed, moisture may damage or change wood traits.
If the interior wooden trim is damaged, you may get a splinter from the wood surface. Therefore, you should immediately have the damaged interior wooden trim replaced by an authorized HYUNDAI dealer.
Cleaning the seat belt webbing Clean the belt webbing with any mild soap solution recommended for cleaning upholstery or carpet. Follow the instructions provided with the soap. Do not bleach or re-dye the webbing because this may weaken the seat belt.
Cleaning the interior window glass If the interior glass surfaces of the vehicle become fogged (that is, covered with an oily, greasy or waxy film), they should be cleaned with glass cleaner. Follow the directions on the glass cleaner container.
NOTICE Do not scrape or scratch the inside of the rear window. This may result in damage to the rear window defroster grid.
09
9-69
The emission control system of your vehicle is covered by a written limited warranty. Please see the warranty information contained in the Service Passport in your vehicle. Your vehicle is equipped with an emission control system to meet all applicable emission regulations. There are three emission control systems, as follows.
(1) Crankcase emission control system (2) Evaporative emission control system (3) Exhaust emission control system
In order to ensure the proper function of the emission control systems, it is recommended that you have your vehicle inspected and maintained by an authorized HYUNDAI dealer in accordance with the maintenance schedule in this manual.
NOTICE For the Inspection and Maintenance Test (with Electronic Stability Control (ESC) system) To prevent the vehicle from misfiring
during dynamometer testing, turn the Electronic Stability Control (ESC) system off by pressing the ESC switch (ESC OFF light illuminated).
After dynamometer testing is completed, turn the ESC system back on by pressing the ESC switch again.
1. Crankcase emission control system
The positive crankcase ventilation system is employed to prevent air pollution caused by blow-by gases being emitted from the crankcase. This system supplies fresh filtered air to the crankcase through the air intake hose. Inside the crankcase, the fresh air mixes with blow-by gases, which then pass through the PCV valve into the induction system.
2. Evaporative emission control system
The Evaporative Emission Control System is designed to prevent fuel vapors from escaping into the atmosphere.
Canister Fuel vapors generated inside the fuel tank are absorbed and stored in the onboard canister. When the engine is running, the fuel vapors absorbed in the canister are drawn into the surge tank through the purge control solenoid valve.
Purge Control Solenoid Valve (PCSV) The purge control solenoid valve is controlled by the Engine Control Module (ECM); when the engine coolant temperature is low during idling, the PCSV closes so that evaporated fuel is not taken into the engine. After the engine warms-up during ordinary driving, the PCSV opens to introduce evaporated fuel to the engine.
EMISSION CONTROL SYSTEM
Maintenance
9-70
3. Exhaust emission control system
The Exhaust Emission Control System is a highly effective system which controls exhaust emissions while maintaining good vehicle performance. When the engine starts or fails to start, excessive attempts to restart the engine may cause damage to the emission system.
Engine exhaust (carbon monoxide) precautions Carbon monoxide can be present
with other exhaust fumes. If you smell exhaust fumes of any kind in your vehicle, drive with all the windows fully open. Have your vehicle checked and repaired immediately.
WARNING Engine exhaust gases contain carbon monoxide (CO). Though colorless and odorless, it is dangerous and could be lethal if inhaled. Follow the instructions on this page to avoid CO poisoning.
WARNING CALIFORNIA PROPOSITION 65 WARNING Engine exhaust and a wide variety of automobile components and parts, including components found in the interior furnishings in a vehicle, contain or emit chemicals known to the State of California to cause cancer and birth defects and reproductive harm. In addition, certain fluids contained in vehicles and certain products of component wear contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Do not operate the engine in confined or closed areas (such as garages) any more than what is necessary to move the vehicle in or out of the area.
When the vehicle is stopped in an open area for more than a short time with the engine running, adjust the ventilation system (as needed) to draw outside air into the vehicle.
Never sit in a parked or stopped vehicle for any extended time with the engine running.
When the engine stalls or fails to start, excessive attempts to restart the engine may cause damage to the emission control system.
Operating precautions for catalytic converters (if equipped)
WARNING The exhaust system and catalytic converter are very hot during and immediately after the engine has been running. To avoid SERIOUS INJURY or DEATH: Do not park, idle, or drive the vehicle
over or near flammable objects, such as grass, vegetation, paper, leaves, etc. A hot exhaust system can ignite flammable items under your vehicle.
Keep away from the exhaust system and catalytic converter or you may get burned. Also, do not remove the heat sink around the exhaust system, do not seal the bottom of the vehicle, and do not coat the vehicle for corrosion control. It may present a fire risk under certain conditions.
09
9-71
Your vehicle is equipped with a catalytic converter emission control device. To prevent damage to the catalytic converter and to your vehicle, take the following precautions: Use only UNLEADED FUEL for
gasoline engines. Do not operate the vehicle when
there are signs of engine malfunction, such as misfire or a noticeable loss of performance.
Do not misuse or abuse the engine. Examples of misuse are coasting with the engine off and descending steep grades in gear with the engine off.
Do not operate the engine at high idle speed for extended periods (5 minutes or more).
Do not modify or tamper with any part of the engine or emission control system. We recommend that all inspections and adjustments are made by an authorized HYUNDAI dealer.
Avoid driving with an extremely low fuel level. Running out of fuel could cause the engine to misfire, damaging the catalytic converter.
Gasoline Particulate Filter (GPF) (if equipped) Gasoline Particulate Filter (GPF) system removes the soot in the exhaust gas. The GPF system automatically burns (or oxidizes) the accumulated soot in accordance with driving situations, unlike a disposable air filter. In other words, the accumulated soot is automatically purged out by the engine control system and by the high exhaust- gas temperature at normal/ high driving speeds. However, when the vehicle is continually driven at repeated short distances or driven at low speed for a long time, the accumulated soot may not be automatically removed because of low exhaust gas temperature. In this case, the accumulated soot may reach a certain amount regardless of the soot oxidization process, then the GPF lamp ( ) will illuminate. The Gasoline Particulate Filter (GPF) lamp stops illuminating, when the driving speed exceeds 50 mph (80 km/h) with engine rpm 1,500 ~ 4,000 and the gear in the 3rd position or above for approximately 30 minutes. When the GPF lamp starts to blink or the warning message Check exhaust system pops up even though the vehicle was driven as mentioned above, we recommend that you have the GPF system checked by an authorized HYUNDAI dealer. With GPF lamp blinking for an extended period of time, it may damage the GPF system and lower the fuel economy.
CAUTION We recommend you to use only the regulated gasoline fuels, when your vehicle is equipped with the GPF system. When you use other gasoline fuels which contain unspecified additives, they may damage the GPF system and cause exhaust emission problems.
Maintenance
9-72
CALIFORNIA PERCHLORATE NOTICE Perchlorate Material-special handling may apply, See: www.dtsc.ca.gov/ hazardouswaste/perchlorate. Notice to California Vehicle Dismantlers: Perchlorate containing materials, such as air bag inflators, seatbelt pretensioners and keyless remote entry batteries, must be disposed of according to Title 22 California Code of Regulations Section 67384.10 (a).
I
Index
Index
Index
I-2
A
Accessing your vehicle ..........................................................................................5-5 Hyundai Digital Key ........................................................................................5-15 Immobilizer system ..........................................................................................5-14 Remote key .........................................................................................................5-5 Smart key ............................................................................................................5-8 Air bag - supplemental restraint system ..............................................................3-45 Additional safety precautions ...........................................................................3-66 Air bag warning labels .....................................................................................3-66 How does the air bags system operate? ............................................................3-50 Occupant Classification System (OCS) ...........................................................3-54 SRS care ...........................................................................................................3-65 What to expect after an air bag inflates ............................................................3-53 Where are the air bags? ....................................................................................3-47 Why didnt my air bag go off in a collision? ...................................................3-60 Air cleaner ...........................................................................................................9-23 Filter replacement .............................................................................................9-23 Air conditioning system .......................................................................................2-11 Appearance care...................................................................................................9-60 Exterior care .....................................................................................................9-60 Interior care ......................................................................................................9-66 Automatic climate control system .....................................................................5-105 Automatic heating and air conditioning .........................................................5-106 Manual heating and air conditioning ..............................................................5-106 System maintenance .......................................................................................5-113 System operation ............................................................................................ 5-111 Automatic transmission ......................................................................................6-14 Automatic transmission operation ....................................................................6-14 Good driving practices .....................................................................................6-21 LCD display message (button type) .................................................................6-19 Paddle shifter (Manual shift mode) ..................................................................6-20
I
I-3
B
Battery .................................................................................................................9-28 Battery capacity label .......................................................................................9-30 Battery recharging ............................................................................................9-30 For best battery service ....................................................................................9-29 Reset items .......................................................................................................9-31 Before driving ........................................................................................................6-4 Before entering the vehicle ................................................................................6-4 Before starting ....................................................................................................6-4 Blind-Spot Collision-Avoidance Assist (BCA) ..................................................7-25 System malfunction and limitations .................................................................7-34 System operation ..............................................................................................7-29 System settings .................................................................................................7-27 Blind-Spot View Monitor (BVM) ......................................................................7-51 System malfunction ..........................................................................................7-52 System operation ..............................................................................................7-51 System settings .................................................................................................7-51 Brake fluid ...........................................................................................................9-21 Checking the brake fluid level .........................................................................9-21 Braking system ....................................................................................................6-34 Anti-lock Brake System (ABS) ........................................................................6-43 Auto Hold (if equipped) ...................................................................................6-39 Disc brakes wear indicator ...............................................................................6-34 Downhill Brake Control (DBC) ......................................................................6-48 Electronic Parking Brake (EPB) .....................................................................6-35 Electronic Stability Control (ESC) ...................................................................6-44 Good braking practices .....................................................................................6-51 Hill-Start Assist Control (HAC) ......................................................................6-48 Power-assist brakes ..........................................................................................6-34 Vehicle Stability Management (VSM) ............................................................6-47 Bulb wattage ..........................................................................................................2-9
Index
I-4
C
Cabin air filter ......................................................................................................9-24 Filter inspection ................................................................................................9-24 Filter replacement .............................................................................................9-24 California perchlorate notice ...............................................................................9-72 Child Restraint System (CRS) .............................................................................3-34 Children Always in the Rear ............................................................................3-34 Installing a Child Restraint System (CRS) .......................................................3-37 Selecting a Child Restraint System (CRS) .......................................................3-35 Climate control additional features ....................................................................5-119 Auto defogging system ...................................................................................5-119 Auto dehumidify ............................................................................................5-120 Auto. Controls That Use Climate Control Settings (for drivers seat) ...........5-121 Recirculating air when washer fluid is used ...................................................5-121 Sunroof inside air recirculation ......................................................................5-121 Consumer Information .........................................................................................2-17
D
Declaration of conformity .................................................................................7-136 Dimensions ............................................................................................................2-8 Door locks ............................................................................................................5-31 Auto door lock/unlock features ........................................................................5-35 Child-protector rear door locks ........................................................................5-35 Electronic child safety lock ..............................................................................5-36 Operating door locks from inside the vehicle ..................................................5-32 Operating door locks from outside the vehicle ................................................5-31 Drive mode integrated control system (2WD).....................................................6-66 Drive mode .......................................................................................................6-66 Drive mode integrated control system (4WD) ....................................................6-69 Drive mode .......................................................................................................6-69 Driver Attention Warning (DAW) ......................................................................7-45 System malfunction and limitations .................................................................7-48 System operation ..............................................................................................7-46 System settings ................................................................................................7-45
I
I-5
Dual clutch transmission......................................................................................6-23 Dual clutch transmission operation ..................................................................6-23 Good driving practices ....................................................................................6-33 LCD display message (button type) .................................................................6-30 Paddle shifter (Manual shifter mode) ...............................................................6-32 Parking .............................................................................................................6-30
E
Emergency commodity ........................................................................................8-32 Fire extinguisher ...............................................................................................8-32 First aid kit .......................................................................................................8-32 Tire pressure gauge ..........................................................................................8-32 Triangle reflector ..............................................................................................8-32 Emission control system ......................................................................................9-69 Gasoline Particulate Filter (GPF) .....................................................................9-72 Engine ....................................................................................................................2-8 Engine compartment ..............................................................................................2-7 Engine compartment ..............................................................................................9-3 Engine coolant /liquid-cooled intercooler coolant ...............................................9-18 Changing coolant ..............................................................................................9-20 Checking the coolant level ...............................................................................9-18 Engine number .....................................................................................................2-16 Engine oil .............................................................................................................9-16 Checking the engine oil and filter ....................................................................9-17 Checking the engine oil level ...........................................................................9-16 Engine Start/Stop button ........................................................................................6-9 Engine Stop/Start button positions ...................................................................6-10 Remote start ......................................................................................................6-13 Starting the engine ............................................................................................6-11 Turning off the engine ......................................................................................6-12 Explanation of scheduled maintenance items ......................................................9-14 Fuel filter (for gasoline engine) ........................................................................9-14 Parking brake ....................................................................................................9-15 Exterior features...................................................................................................5-67 Fuel filler door ..................................................................................................5-77 Hood .................................................................................................................5-67 Liftgate .............................................................................................................5-68 Power liftgate ...................................................................................................5-70 Smart liftgate ....................................................................................................5-75
Index
I-6
Exterior features.................................................................................................5-136 Roof side rails .................................................................................................5-136 Exterior overview (I) .............................................................................................2-2 Exterior overview (II) ............................................................................................2-3
F
Forward CollisionAvoidance Assist (FCA) (Sensor fusion) ...............................7-2 System malfunction and limitations .................................................................7-10 System operation ................................................................................................7-6 System settings ...................................................................................................7-4 Forward/Reverse Parking Distance Warning (PDW) ....................................... 7-111 System malfunction and precautions ..............................................................7-113 System operation ............................................................................................ 7-111 System settings ............................................................................................... 7-111 Four wheel drive (4WD) ......................................................................................6-52 Emergency precautions ....................................................................................6-58 Four Wheel Drive (4WD) operation ................................................................6-53 Reducing the risk of a rollover .........................................................................6-59 Fuses ....................................................................................................................9-41 Engine compartment panel fuse replacement ...................................................9-43 Fuse/relay panel description .............................................................................9-44 Instrument panel fuse replacement ...................................................................9-42
H
Hazard warning flasher ..........................................................................................8-2 Head-Up Display (HUD) ....................................................................................5-80 Head-up display information ............................................................................5-80 Head-up display settings ..................................................................................5-80 Precautions while using the head-up display ...................................................5-81 High Beam Assist (HBA) ...................................................................................5-86 System malfunction and limitations .................................................................5-87 System operation ..............................................................................................5-87 System settings .................................................................................................5-86 Highway Driving Assist (HDA) .........................................................................7-81 System malfunction and limitations .................................................................7-85 System operation ..............................................................................................7-83 System settings .................................................................................................7-82
I
I-7
I
Idle Stop and Go (ISG) .......................................................................................6-61 Forced to restart engine ....................................................................................6-64 ISG malfunction ...............................................................................................6-65 ISG system off ..................................................................................................6-64 ISG system operation .......................................................................................6-61 If the engine overheats ...........................................................................................8-7 If the engine will not start ......................................................................................8-3 If you have a flat tire (with spare tire) .................................................................8-14 Changing tires ..................................................................................................8-16 Jack and tools ...................................................................................................8-14 Jack label ..........................................................................................................8-21 Removing and storing the spare tire .................................................................8-14 If you have a flat tire (with Tire Mobility Kit) ....................................................8-22 Checking the tire inflation pressure .................................................................8-28 Components of the Tire Mobility Kit ...............................................................8-24 Introduction ......................................................................................................8-22 Notes on the safe use of the Tire Mobility Kit .................................................8-23 Using the Tire Mobility Kit ..............................................................................8-25 Ignition switch .......................................................................................................6-5 Key ignition switch ............................................................................................6-5 Key ignition switch positions .............................................................................6-6 Starting the engine ..............................................................................................6-7 Important safety precautions..................................................................................3-2 Air bag hazards ...................................................................................................3-2 Always wear your seat belt ................................................................................3-2 Control your speed .............................................................................................3-2 Driver distraction ................................................................................................3-2 Keep your vehicle in safe condition ...................................................................3-2 Restrain all children ...........................................................................................3-2 In case of an emergency while driving ..................................................................8-2 If the engine stalls at a crossroad or crossing .....................................................8-2 If the engine stalls while driving ........................................................................8-2 If you have a flat tire while driving ....................................................................8-3
Index
I-8
Infotainment system...........................................................................................5-137 Antenna ..........................................................................................................5-137 Bluetooth Wireless Technology ....................................................................5-139 How vehicle radio works ................................................................................5-139 Infotainment system .......................................................................................5-138 Steering wheel remote controls ......................................................................5-137 USB Port ........................................................................................................5-137 Voice recognition ............................................................................................5-138 Infotainment System specifications ..................................................................5-143 Bluetooth ........................................................................................................5-144 USB ................................................................................................................5-143 Instrument cluster ..................................................................................................4-4 Gauges and meters .............................................................................................4-5 Instrument cluster control ...................................................................................4-5 LCD display messages .....................................................................................4-23 Transmission shift indicator ...............................................................................4-9 Warning and indicator lights ............................................................................4-10 Instrument panel overview (I) ...............................................................................2-5 Instrument panel overview (II) ..............................................................................2-6 Integrated memory system ...................................................................................5-39 Easy access function .........................................................................................5-41 Recalling memory positions .............................................................................5-40 Resetting the system .........................................................................................5-40 Storing memory positions ................................................................................5-39 Interior features ..................................................................................................5-124 AC Inverter .....................................................................................................5-127 Ashtray ...........................................................................................................5-125 Cargo security screen .....................................................................................5-134 Clock ..............................................................................................................5-131 Coat hook .......................................................................................................5-131 Cup holder ......................................................................................................5-124 Floor mat anchor(s) ........................................................................................5-132 Luggage net holder .........................................................................................5-133 Power outlet ....................................................................................................5-126 Side curtain .....................................................................................................5-133 Sunvisor ..........................................................................................................5-125 USB charger ...................................................................................................5-127 Wireless smart phone charging system ..........................................................5-129
I
I-9
Interior lights .......................................................................................................5-89 Front lamps .......................................................................................................5-89 Interior lamp AUTO cut ...................................................................................5-89 Luggage compartment lamp .............................................................................5-91 Puddle lamp ......................................................................................................5-91 Rear lamps ........................................................................................................5-90 Vanity mirror lamp ...........................................................................................5-90 Welcome system ...............................................................................................5-92 Interior overview ..................................................................................................2-4
J
Jump starting ..........................................................................................................8-4
L
Lane Following Assist (LFA) ..............................................................................7-77 System malfunction and limitations .................................................................7-80 System operation ..............................................................................................7-78 System settings .................................................................................................7-77 Lane Keeping Assist (LKA) ...............................................................................7-18 System malfunction and limitations .................................................................7-22 System operation ..............................................................................................7-20 System settings ................................................................................................7-18 LCD display .........................................................................................................4-29 LCD display control .........................................................................................4-29 Trip computer (Type A) ....................................................................................4-40 Trip computer (Type B) ....................................................................................4-43 User settings mode ...........................................................................................4-33 View modes ......................................................................................................4-30 Light bulbs ...........................................................................................................9-51 Headlamp, position lamp, turn signal lamp, Daytime Running Light (DRL) replacement ......................................................................................................9-52 High mounted stop lamp replacement ..............................................................9-57 Interior light replacement .................................................................................9-58 License plate lamp replacement .......................................................................9-58 Rear combination lamp replacement ................................................................9-54 Side repeater lamp replacement .......................................................................9-54 Lighting ...............................................................................................................5-82 Exterior lights ...................................................................................................5-82
Index
I-10
M
Maintenance services .............................................................................................9-4 Owner maintenance precautions ........................................................................9-4 Owners responsibility .......................................................................................9-4 Manual climate control system ............................................................................5-97 Heating and air conditioning ............................................................................5-98 System maintenance .......................................................................................5-103 System operation ............................................................................................5-101 Mirrors .................................................................................................................5-45 Inside rearview mirror ......................................................................................5-45 Reverse parking aid ..........................................................................................5-57 Side View mirrors .............................................................................................5-55
N
Navigation-Based Smart Cruise Control (NSCC) ..............................................7-70 Limitations of the system .................................................................................7-73 System operation ..............................................................................................7-71 System settings .................................................................................................7-70
O
Owner maintenance ...............................................................................................9-5 Owner maintenance schedule .............................................................................9-6
P
Panoramic sunroof ...............................................................................................5-62 Closing the sunroof ..........................................................................................5-64 Resetting the sunroof ........................................................................................5-65 Sliding the sunroof ...........................................................................................5-63 Sunroof open warning ......................................................................................5-66 Sunshade...........................................................................................................5-63 Tilting the sunroof ............................................................................................5-64
I
I-11
R
Rear Cross-Traffic Collision-Avoidance Assist (RCCA) ....................................7-97 System malfunction and limitations ...............................................................7-103 System operation ..............................................................................................7-99 System settings .................................................................................................7-98 Rear View Monitor (RVM) ..................................................................................7-88 System malfunction and limitations .................................................................7-91 System operation ..............................................................................................7-89 System settings .................................................................................................7-89 Recommended lubricants and capacities .............................................................2-12 Recommended SAE viscosity number .............................................................2-14 Refrigerant label ..................................................................................................2-16 Remote Smart Parking Assist (RSPA) ...............................................................7-123 System malfunction and limitations ...............................................................7-131 System operation ............................................................................................7-125 System settings ...............................................................................................7-124 Reporting Safety Defects .....................................................................................2-18 Reverse Parking Collision-Avoidance Assist (PCA) ........................................7-115 System malfunction and limitations ...............................................................7-118 System operation ............................................................................................7-117 System settings ...............................................................................................7-115 Reverse Parking Distance Warning (PDW) ......................................................7-108 System malfunction and precautions .............................................................7-109 System operation ............................................................................................7-108 System settings ..............................................................................................7-108
S
Safe Exit Assist (SEA) ........................................................................................7-39 System malfunction and limitations .................................................................7-43 System operation ..............................................................................................7-41 System settings .................................................................................................7-40 Scheduled maintenance services............................................................................9-7 Maintenance under severe usage conditions ....................................................9-12 Normal maintenance schedule ...........................................................................9-8
Index
I-12
Seat belts ..............................................................................................................3-23 Additional seat belt safety precautions .............................................................3-31 Care of seat belts ..............................................................................................3-33 Seat belt restraint system ..................................................................................3-25 Seat belt safety precautions ..............................................................................3-23 Seat belt warning light ......................................................................................3-24 Seats .......................................................................................................................3-3 Air ventilation seat ...........................................................................................3-20 Front seats ..........................................................................................................3-5 Head Restraints ................................................................................................3-14 Rear Occupant Alert (ROA) .............................................................................3-21 Safety precautions ..............................................................................................3-4 Seat warmers ....................................................................................................3-18 Smart Cruise Control (SCC) ...............................................................................7-53 System display and control ..............................................................................7-58 System malfunction and limitations .................................................................7-63 System operation ..............................................................................................7-57 System settings .................................................................................................7-54 Special driving conditions ...................................................................................6-72 Driving at night ................................................................................................6-73 Driving in flooded areas ...................................................................................6-74 Driving in the rain ............................................................................................6-73 Hazardous driving conditions ...........................................................................6-72 Highway driving ...............................................................................................6-74 Reducing the risk of a rollover .........................................................................6-74 Rocking the vehicle ..........................................................................................6-72 Smooth cornering .............................................................................................6-73 Steering wheel .....................................................................................................5-42 Electric Power Steering (EPS) .........................................................................5-42 Heated steering wheel ......................................................................................5-43 Horn ..................................................................................................................5-44 Tilt / Telescopic steering ..................................................................................5-43 Storage compartment .........................................................................................5-122 Center console storage ...................................................................................5-122 Glove box .......................................................................................................5-122 Luggage tray ...................................................................................................5-123 Tray ................................................................................................................5-123
I
I-13
Surround View Monitor (SVM) ..........................................................................7-92 System malfunction and limitations ................................................................7-96 System operation .............................................................................................7-94 System settings .................................................................................................7-93
T
Theft-alarm system ..............................................................................................5-38 Tire Pressure Monitoring System (TPMS) ............................................................8-9 Changing a tire with TPMS ..............................................................................8-12 Check tire pressure .............................................................................................8-9 Low tire pressure position and tire pressure telltale .........................................8-11 Low tire pressure warning light .......................................................................8-11 Tire pressure monitoring system ......................................................................8-10 TPMS malfunction indicator ............................................................................8-12 Tire specification and pressure label ...................................................................2-15 Tires and wheels ..................................................................................................2-10 Tires and wheels ..................................................................................................9-32 Check tire inflation pressure ............................................................................9-33 Low aspect ratio tires .......................................................................................9-40 Recommended cold tire inflation pressures .....................................................9-32 Tire care ............................................................................................................9-32 Tire maintenance ..............................................................................................9-36 Tire replacement ...............................................................................................9-35 Tire rotation ......................................................................................................9-34 Tire sidewall labeling .......................................................................................9-37 Tire traction ......................................................................................................9-36 Wheel alignment and tire balance ....................................................................9-35 Wheel replacement ...........................................................................................9-36 Towing .................................................................................................................8-30 Towing service .................................................................................................8-30 Trademarks ........................................................................................................5-144 Trailer towing ......................................................................................................6-79 Driving with a trailer ........................................................................................6-84 If you decide to pull a trailer? ..........................................................................6-80 Maintenance when towing a trailer ..................................................................6-87 Trailer towing equipment .................................................................................6-83
Index
I-14
V
Vehicle certification label ....................................................................................2-15 Vehicle Identification Number (VIN) ..................................................................2-15 Vehicle load limit .................................................................................................6-88 The Loading Information Label .......................................................................6-89 Volume and weight ..............................................................................................2-11
W
Washer fluid .........................................................................................................9-22 Checking the washer fluid level .......................................................................9-22 Windows ..............................................................................................................5-58 Power windows ................................................................................................5-59 Windshield defrosting and defogging ................................................................5-115 Auto defogging system (only for automatic climate control system) ............5-117 Automatic climate control system ..................................................................5-116 Manual climate control system ......................................................................5-115 Rear window defroster ...................................................................................5-118 Winter driving ......................................................................................................6-75 Snow or icy conditions .....................................................................................6-75 Winter precautions ...........................................................................................6-77 Wiper blades ........................................................................................................9-25 Blade inspection ...............................................................................................9-25 Blade replacement ............................................................................................9-25 Wipers and washers ......................
Related manuals for Hyundai Santa Fe Calligraphy 19 2021 SUV Owner's Manual
Manualsnet FAQs
If you want to find out how the Santa Fe Hyundai works, you can view and download the Hyundai Santa Fe Calligraphy 19 2021 SUV Owner's Manual on the Manualsnet website.
Yes, we have the Owner's Manual for Hyundai Santa Fe as well as other Hyundai manuals. All you need to do is to use our search bar and find the user manual that you are looking for.
The Owner's Manual should include all the details that are needed to use a Hyundai Santa Fe. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.
The best way to navigate the Hyundai Santa Fe Calligraphy 19 2021 SUV Owner's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.
This Hyundai Santa Fe Calligraphy 19 2021 SUV Owner's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.
You can download Hyundai Santa Fe Calligraphy 19 2021 SUV Owner's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.
To be able to print Hyundai Santa Fe Calligraphy 19 2021 SUV Owner's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Hyundai Santa Fe Calligraphy 19 2021 SUV Owner's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.