Hyundai Veloster Base 2017 Hatchback Quick Reference Guide PDF
Summary of Content for Hyundai Veloster Base 2017 Hatchback Quick Reference Guide PDF
Scheduled Maintenance Normal Usage Severe Usage*
Engine Oil And Filter* Replace 7,500 or 12 mos. Replace 3,750 or 6 mos.
Fuel Additives *1 Add Every 7,500 or 12 mos. Add Same as Normal
Tire Rotation Perform 7,500 Perform 7,500
Air Cleaner Filter Inspect Replace
7,500 30,000
Inspect Replace
Same As Normal More Frequently
Battery Condition Inspect 7,500 Inspect Same As Normal
Vacuum Hose Inspect 7,500 Inspect Same As Normal
Climate Control Air Filter (For Evaporator And Blower Unit) Replace 15,000 Replace More Frequently
Air Conditioning Refrigerant Inspect 15,000 Inspect Same As Normal
Brake Hoses & Lines Inspect 15,000 Inspect Same As Normal
Drive Shafts & Boots Inspect 15,000 Inspect 7,500 or 6 mos.
Electronic Throttle Control Inspect 15,000 Inspect Same As Normal
Exhaust Pipe & Muffler Inspect 15,000 Inspect Same As Normal
Front Disc Brake/Pads, Calipers Inspect 15,000 Inspect More Frequently
Rear Brake Drums/Linings Rear Brake Disc/Pads Inspect 15,000 Inspect More Frequently
Steering Gear Box, Linkage & Boots/ Lower Arm Ball Joint, Upper Arm Ball Joint Inspect 15,000 Inspect More Frequently
Suspension Mounting Bolts Inspect 15,000 Inspect Same As Normal
Brake/Clutch Fluid Inspect 30,000 Inspect Same As Normal
Fuel Filter Inspect 30,000 Inspect Same As Normal
Fuel Lines, Fuel Hoses And Connections Inspect 30,000 Inspect Same As Normal
Fuel Tank Air Filter Inspect 30,000 Inspect Same As Normal
Parking Brake Inspect 30,000 Inspect More Frequently
Vapor Hose, Fuel Tank & Fuel Filler Cap Inspect 30,000 Inspect Same As Normal
Valve Clearance Inspect 60,000 Inspect Same As Normal
Manual Transmission Fluid Inspect 37,500 Replace 75,000
EcoShift Dual Clutch Transmission Fluid Inspect 37,500 Replace 75,000
Drive Belt (Alt, A/C) 1st Inspect 60,000 or 72 mos. Add. Inspect 15,000 or 24 mos. Inspect Same As Normal
Spark Plugs (Iridium Coated) Replace 105,000 Replace More Frequently
Coolant 1st Replace 120,000 or 10 yrs. Add Replace 30,000 or 24 mos. Replace Same As Normal
*Check the engine oil regularly between recommended oil change. Hyundai recommends Quaker State oil. *1 If TOP TIER Detergent Gasoline is not available, one bottle of additive is recommended. Additives are available from your authorized Hyundai dealer along with information on how to use them. Do not mix other additives.
*See Owners Manual for details.
Looking for more detailed information? This Quick Reference Guide does not replace your vehicles Owners Manual, If you require additional information or are unsure of a specific issue, you should always refer to the vehicles Owners Manual or contact your authorized Hyundai dealer. The information contained in this Quick Reference Guide was correct at the time of printing, however, specifications and equipment can change without notice. No warranty or guarantee is being extended in this Quick Reference Guide, and Hyundai reserves the right to change product specifications and equipment at any time without incurring obligations. Some vehicles are shown with optional equipment. Specifications apply to U.S. vehicles only. Please contact your Hyundai dealer for current vehicle specifications.
MAINTENANCE
NP150-V2017 (Rev 10/19/16)
Printing 10/21/16
www.hyundai.com
Roadside Assistance: 1-800-243-7766 Consumer Affairs: 1-800-633-5151
SiriusXM Radio: 1-800-967-2346 Blue Link: 1-855-2BLUELINK (1-855-225-8354)
HYUNDAI VELOSTER Quick Reference Guide
BLUETOOTH page 22-23 - Demonstrate phone pairing
Refer to www.hyundaiusa.com/bluetooth - Demonstrate QR code
BLUE LINK pages 24-26 - Assist with creating MyHyundai.com account - Assist with Blue Link enrollment Show Blue Link Users Manual & tear out Voice Commands/Quick Tip Card - Encourage customers to press the Blue link button
CLOCK pages 37 - Demonstrate how to set clock (including daylight savings setting for Navigation equipped vehicles)
ECOSHIFT DUAL CLUTCH TRANSMISSION pages 39-41 - Explain DCT characteristics
NAVIGATION (if applicable) page 29-30 - Demonstrate navigation system POI, enter dealer address
TIRE PRESSURE MONITORING SYSTEM (TPMS) page 44
- Explain TPMS function of customer - When illuminated, one or more tires are
under-inflated - Blinks for approximately one minute then remains illuminated
when there is a malfunction with the TPMS
VEHICLE SETTINGS pages 12-13 and 27-30 - Demonstrate vehicle settings in instrument cluster - Demonstrate navigation use, enter dealer address - Show radio presets
WALK THE CUSTOMER THROUGH EACH OF THE FOLLOWING KEY DELIVERY FEATURES
DEFROST - page 15 & 17 1 Press the front defrost button. 2 Set to warmest temperature setting. 3 Set to highest fan speed.
1 2
3
Table of contents GETTING STARTED
Engine Start/Stop 03 Remote keyless entry 02 Front seat adjustment 04 Headrest adjustment 05 Seat belt adjustment 05
FEATURES AND CONTROLS
Central door lock switch 07 Child-protector rear door lock 11 Climate control 14-17 Clock adjustment 37 Cruise control system 18 Drivers main control 07 Electronic Stability Control (ESC) 45 Fuel door 06 Head lights and fog lights 08 Instrument cluster 12-13 Instrument panel illumination 13 Interior lights 11 Rearview camera 43 Steering wheel adjustments 06 Steering wheel controls 18-19 Sunroof 10 Transmissions 39-42 Trip computer 13 Tire Pressure Monitoring System (TPMS) 44 Wiper and washer 09
MULTIMEDIA
Android Auto 32-33 Apple carplay 34-37 Audio 27-28 AUX, USB,and iPod Port 38 Blue Link Telematics system 24-26 Bluetooth operational tips 20-21 Bluetooth phone pairing 22-23 Navigation 29-31
* Some vehicles may not be equipped with all the listed features.
Steering wheel adjustments Page 06
Head lights and fog lights Page 08
Audio/ Navigation Pages 27-30
Wiper and washer Page 09
Climate control Pages 14-17
Instrument cluster Pages 12-13
Transmission Pages 39-42
Use this Quick Reference Guide to learn about the features that will enhance your enjoyment of your Hyundai. More detailed information about these features are available in your Owners Manual.
How to: 1. Pair phone to your vehicle. Refer to page 22-23. 2. Get started with Blue Link. Refer to page 24-26.
WARNING!
To reduce the risk of serious injury to yourself and others, read and understand the important SAFETY INFORMATION in your Owners Manual.
GETTING STARTED
VELOSTER 0302 HYUNDAI
REMOTE KEYLESS ENTRY
Drivers door Lock/Unlock Smart key must be within range.
Press: Once Unlock driver door Twice Unlock all doors Third Lock all doors
Remove mechanical key Press and hold the release A button and remove the key.
Reinstall mechanical key Put the key into the key slot and push it until a click sound is heard.
Lock
Unlock
Tailgate unlock (press and hold)
Panic
A
ENGINE START/STOP BUTTON
ENGINE START STOP
With the ignition OFF, press the engine start /stop button: Once for ACC (Accessory) mode. Twice for ON mode. Three times for OFF.
To start the engine, press the start/stop button while: EcoShift Dual Clutch Transmission: depressing the brake pedal. Manual Transmission: depressing the clutch and brake pedals.
To shut engine OFF, shift to: EcoShift Dual Clutch Transmission: P (Park) and press the
start/stop button.
Manual Transmission: Select Neutral, apply the hand brake, and press the start/stop button.
Emergency situations Shut off engine while driving:
Press engine start/stop button for more than 2 seconds or press it 3 times consecutively within 3 seconds.
Restart engine while driving: Press engine start/stop button with shift lever in N (Neutral).
ENGINE START STOP
ENGINE START STOP
GETTING STARTED
VELOSTER 0504 HYUNDAI
FRONT SEAT ADJUSTMENT
A
B
B
Forward / backward
Seat height (drivers seat only)
Seatback angle
Folding Lever (drivers seat only)
C
C
A
D
E
D
HEADREST ADJUSTMENT
To Raise Headrest: Pull headrest up.
To Lower Headrest: Press lock knob while pressing down on headrest.
PRESS
SEAT BELT ADJUSTMENT (Drivers Front seat)
Set the belt extension guide to one of the 3 positions when using the seat belt.
See Owners Manual for additional seat belt information.
1
2
3
Lumbar support (drivers seat only)
ENGINE START STOP
E
FEATURES AND CONTROLS
VELOSTER 0706 HYUNDAI
Tilt
STEERING WHEEL ADJUSTMENTS
NOTE: Do not adjust while driving.
1. Pull the lever A down to release. 2. Set the angle B and distance C
3. Pull the lever A up to lock.
Telescopic
A
B C
NOTE
After adding fuel, always reinstall the fuel cap onto the ller neck by rotating it clockwise until it clicks once.
Failure to do this may result in the Check Engine Light ( ) illuminating.
FUEL DOOR
DRIVERS MAIN CONTROLS
Outside Rearview Mirrors Move the selecting switch A to the right or left for adjusting the outside rearview mirrors.
Depress the appropriate direction
( ) on the switch. Middle position Lock the control.
Window Auto down/up (drivers side only) Press past detent to fully open/close window.
Power Window Lock Switch Disables the power window switches on the passenger doors.
CENTRAL DOOR LOCK SWITCH
A
All doors will lock.
All doors will unlock.
Check the engine oil regularly between recommended oil changes.
ENGINE START STOP
FEATURES AND CONTROLS
VELOSTER 0908 HYUNDAI
HEAD LIGHTS AND FOG LIGHTS
AUTO
Parking light
DRL OFF
Head light
Auto light
Escort Function Head lights will stay on for approximately 30 seconds after exiting and locking vehicle. Press remote lock button twice to turn head light off.
See Owners Manual for more detail.
High beam Fog light
Turn signals A and lane change signals B
Flashing head lights
WIPER AND WASHER
Rear Wiper and Washer
ON - Normal wiper operation
INT - Intermittent wiper operation
OFF - Wiper off
MIST - Single wipe
OFF - Off
INT - Intermittent wipe
LO - Normal wiper speed
HI - Fast wiper speed
Front Intermittent wipe time adjustment
Fast wiper speed
Slow wiper speed
Front Wiper and Washer
Pull to spray and wipe
Push to spray and wipe
PULL
PUSH
ENGINE START STOP
A
A
B
B
FEATURES AND CONTROLS
VELOSTER 1110 HYUNDAI
SUNROOF
Sliding the sunroof To Open Press switch backward.
Press switch backward past the detent to open completely.
To Close Press switch forward and hold.
To Tilt Press or pull switch up or down.
Tilting the sunroof
INTERIOR LIGHTS
Push the lens A to turn
the map lamp on or off.
Switch B
ON Map lamp and room lamp will turn on.
DOOR Map lamp and room lamp will turn on when any door is open except tailgate.
OFF The lights stay off at all times, except when individually turned on.
A
B
B
A
Map lamp
Room lamp
CHILD-PROTECTOR REAR DOOR LOCK
Lock ( ) Insert a key into the hole and turn it to the lock ( ) position.
Allows or prevents opening the rear door from inside of the vehicle.
Unlock Insert a key into the hole and turn it clockwise to the unlock position.
ENGINE START STOP
FEATURES AND CONTROLS
VELOSTER 1312 HYUNDAI
INSTRUMENT PANEL ILLUMINATION Push the control switch up or down to adjust the brightness
WARNINGS AND INDICATORS
Seat belt warning light
Air bag warning light
Low Tire Pressure Indicator / TPMS (Tire Pressure Monitoring System) malfunction indicator
ABS warning light
Front fog light indicator
Light on indicator
Tailgate open warning light
Electric Power Steering system warning light
Manual transmission shift indicator
High beam indicator
Cruise indicator
Parking brake & Brake fluid warning light
Engine oil pressure warning light
Charging system warning light
Malfunction indicator light
ESC (Electronic Stability Control) indicator
Low fuel level warning light
ESC(Electronic Stability Control) OFF indicator Cruise SET indicator
EcoShift Dual clutch transmission indicator
Door open warning light
Engine coolant temperature warning light
Turn signal indicator
Active ECO indicator
Immobilizer indicator
KEY OUT indicator
Low beam indicator
Turn signal indicators
Speedometer
Fuel Gauge
Warning and indicator lights
Tachometer
Odometer/ Trip computer
Press the TRIP button to select functions as shown below.
Press and hold the RESET button to reset the Tripmeter.
Tripmeter A/B Range (Miles to Empty)
Average Fuel Economy
Average SpeedElapsed Time
TRIP COMPUTER
Engine Coolant Temperature Gauge
ENGINE START STOP
FEATURES AND CONTROLS
VELOSTER 1514 HYUNDAI
MODE SELECTION
Face Level
Bi Level
Floor Level
Floor Defrost Level
This is used to select outside (fresh) air position or recirculated air position.
AIR INTAKE CONTROL
Outside (fresh) air position
Recirculated air position
CLIMATE CONTROL (Manual climate control)
A Mode selection buttons
B Temperature control knob
C Fan speed control knob
D Air Conditioning button
A
D
E
F
G
H
C
B
E Front windshield defrost button
F Rear window defroster button
G Air intake control button
H MAX Air Conditioning button
REAR WINDOW DEFROSTER
DEFROSTING / DEFOGGING
Press to activate / deactivate the rear defroster.
1. Press the front windshield defrost control.
2. Set the temperature control to the warmest setting.
3. Set the fan speed to the highest setting.
NOTE
To reduce the tendency of the glass fogging and improve visibility, keep the interior surface of the windshield clean by wiping it with a clean cloth and glass cleaner. In addition, select air intake control to the outside (fresh) air position whenever possible while operating the vehicle.
ENGINE START STOP
FEATURES AND CONTROLS
VELOSTER 1716 HYUNDAI
A Mode selection button
B Temperature control knob
C Fan speed control buttons
D Air Conditioning button
E Front windshield defrost button
F Rear window defroster button
G Air intake control button
H Climate button
MODE
CLIMATE
AUTO
OFF
E
F
G
H
B
MODE SELECTION
Face Level
Bi Level
Floor Level
Floor Defrost Level
This is used to select outside (fresh) air position or recirculated air position.
AIR INTAKE CONTROL
Outside (fresh) air position
Recirculated air position
C
A
D AUTO
OFF
REAR WINDOW DEFROSTER
DEFROSTING / DEFOGGING
Press to activate / deactivate the rear defroster.
1. Press the front windshield defrost control.
2. Set the temperature control to the warmest setting.
3. Set the fan speed to the highest setting.
NOTE
To reduce the tendency of the glass fogging and improve visibility, keep the interior surface of the windshield clean by wiping it with a clean cloth and glass cleaner. In addition, select air intake control to the outside (fresh) air position whenever possible while operating the vehicle.
CLIMATE CONTROL (Automatic climate control)
ENGINE START STOP
FEATURES AND CONTROLS
VELOSTER 1918 HYUNDAI
STEERING WHEEL CONTROLS
Audio control A VOLUME Raise or lower speaker volume.
B MODE Change the audio source.
Hold to turn Audio power ON/OFF.
C SEEK/PRESET Press to change presets. Press and hold to seek stations.
Bluetooth control A CALL Place and transfer call.
B END End call or cancel function.
C TALK Activate voice recognition.
Cruise control system
Cruise set indicator
Cruise indicator
To set a cruising speed 1. Press ON/OFF button A and the
CRUISE indicator will illuminate in the instrument cluster.
2. Accelerate to desired cruising speed (above 25 mph). Press SET-
button C and remove your foot from the accelerator pedal.
To accelerate or decelerate Press RES + button B up to increase set cruising speed.
Press SET - button C down to decrease set cruising speed.
To cancel cruising speed Press CANCEL button D , depress brake pedal, or press ON/OFF
button A .
A
A
A
B
B
B
C
C
C
D
ENGINE START STOP
MULTIMEDIA
VELOSTER 2120 HYUNDAI
BLUETOOTH OPERATIONAL TIPS In the following situations you or the other party may have difficulty hearing each other:
1. When the Bluetooth volume is at a high level. To reduce echo and distortion, try lowering the volume.
2. When driving on a rough road, high speeds and/or with the window open.
3. When the air conditioning vents are facing the microphone and/or when the air conditioning fan is at the max speed.
Making a call using voice recognition:
The menu tree identifies available voice recognition Bluetooth functions.
Calling by Name: 1. Press button. 2. Say the following command: Call
to Johns Mobile, Home, or Office phone number.
Dialing by Number: 1. Press button. 2. Say Dial Number. 3. Say desired phone numbers. 4. Say Dial to complete the call.
For complete list of commands, refer to your Owners Manual.
VOICE RECOGNITION TIPS
Your vehicle is equipped with Voice Recognition technology which allows drivers to operate their phones without having to take their eyes off the road to minimize distractions.
Voice recognition performance may be affected if driving with windows and sun roof open; when the heating-cooling system is on; when passing in a tunnel or when driving on rugged and uneven roads.
Quick reference on using voice commands
To start voice command. Press the key, the following commands are available:
Command Function
More Help Provides guidance on commands that can be used anywhere in the system
Help Provides guidance on commands that can be used within the current mode.
Calls
Dial
Phone Provides guidance on Phone related commands. After saying this command,
say Call History, Contacts to execute corresponding functions.
Call History Displays the Call History screen.
Contacts
(Call by Name
Displays the Contacts screen. After saying this command, say the name of a
contact saved in the Contacts to automatically connect the cell.
Dial Number Display the Dial number screen. After saying this command, you can say the
number what you want to call.
Bluetooth control A CALL Place and transfer call.
B END End call or cancel function.
C TALK Activate voice recognition.
A
B
C
To Answer a Call: Press button on the steering wheel. To Reject a Call: Press button on the steering wheel. To Adjust Ring Volume: Use the VOLUME buttons on the steering wheel. To Transfer a Call to the Phone (Private Mode): Press and hold button on the steering wheel until the
audio system transfers a call to the phone. To Finish a Call: Press button on the steering wheel.
ENGINE START STOP
MULTIMEDIA
VELOSTER 2322 HYUNDAI
Please visit www.hyundaiusa.com/Bluetooth for a list of compatible phones tested to work with
Hyundais Bluetooth system.
Pairing tutorials, phone compatibility and Operational tips can be found through the Smart QR code using the QR reader application on your Smartphone.
BLUETOOTH PHONE PAIRING
Phone setup (pairing phone) with Standard Radio
1. Press PHONE button on the radio or on the steering wheel remote control.
2. Touch Yes to search for Bluetooth phones.
3. In your phone, initiate a search for Bluetooth devices.
4. After search is completed in your phone, select Veloster.
5. Input the passkey displayed on screen to your phone.
NOTE Vehicle must be in parked to complete pairing process.
Phone setup (pairing phone) with Navigation
2. Press
3. Pair your car after your mobile phone detects the Bluetooth device.
4. Enter the passkey or accept the authorization popup. (The default passkey is 0000.)
5. Connect Bluetooth.
1. Press the PHONE button in the head unit or button in the steering wheel remote control.
NOTE: Vehicle must be parked to complete pairing process.
ENGINE START STOP
MULTIMEDIA
VELOSTER 2524 HYUNDAI
You can download the Blue Link mobile app to your compatible smart phone from the following sites: iPhone
Apple
App Store Android
Google Play
Remote Start enables you to remotely start your vehicle from virtually anywhere. For navigation vehicles, you can also enable climate control remotely and turn on the front-window defroster, ensuring a warm or cool car is ready to go when you are.
To use this feature, you must have a Blue Link Personal Identification Number (PIN). To create or change your PIN, log on to www.MyHyundai.com.
Remote Start
Remote Start
Remote Start with Climate Control will automatically shut off after 10 minutes or after selected engine timer runs out in navigation vehicles.
While this feature is active, the parking lights will blink until vehicle is turned off or when vehicle is in operation.
To continue operation of the vehicle, the proximity key must be inside the vehicle with the driver prior to pressing the brake and being able to move the gearshift from the P (Park) position.
Remember:
Scan to see l ist of compatible devices and to download the app.
BLUE LINK TELEMATICS SYSTEM
SOS
Navigation Services
Blue Link
Blue Link subscription is required. To enroll, please visit your dealership or MyHyundai.com.
Press the button for access to the voice-response menu of services.
- You can say:
Press the button for Destination Search Powered by GoogleTM.
- For audio equipped vehicles, you will receive turn-by-turn directions once you search for your destination. To hear a list of commands, say, Help. For navigation equipped vehicles, state your desired destination after the prompt and select the POI from the touchscreen display to navigate.
Press the button for SOS Emergency Assistance.
Refer to your Blue Link Users Manual for detailed information on system operation.
For immediate assistance with subscription services, please call 1-855-2BLUELINK (1-855-225-8354).
Google TM
is a registered trademark of Google, Inc.
For Audio equipped For Navigation equipped
New Destination Service Link Roadside Assistance Valet Alert Help Cancel
Service Link Roadside Assistance Blue Link Account Services Help Cancel
ENGINE START STOP
MULTIMEDIA
VELOSTER 2726 HYUNDAI
DEST
TUNEFILE POWER PUSH
VOL ENTER
MEDIA
DISP
RADIO
APPS
Press POWER button B to turn radio on.
TUNING/LISTENING TO CHANNELS
1. Press RADIO button A .
2. Rotate TUNE knob D to desired channel.
NOTE A clear view of the southern sky is recommended to ensure XM radio reception.
SETTING PRESET BUTTONS
Six preset frequencies for each radio modes can be stored manually.
1. Select the radio mode you want
to store a station into.
2. Select the desired station.
3. Touch and hold one of the preset buttons until audible beep is heard.
ADJUSTING THE SOUND
1. Press SETUP button C .
2. Touch Sound on screen.
Touch the arrows on screen to adjust desired sound setting.
Please refer to your Owners Manual for more detailed information on how to use your audio system. Complimentary XM subscription ends three months following the vehicle date of sale. Please contact XM Radio at 1-800-XM-RADIO (1-800-967-2346) to renew your XM subscription.
AUDIO
A
B D
Non-Navigation
C
Preconditions:
Ignition is OFF
Alarm is armed (i.e., vehicle locked by key fob Remote Door Lock)
Gearshift level is in the P (Park) position
Brake pedal is not depressed
Engine hood is securely closed
All the doors are closed and locked
The tailgate or trunk lid is closed
The security/panic system is not activated
The proximity key is not inside the vehicle
The battery power is not low
Vehicle is located in an open area
It has been less than 4 days since last vehicle ignition off
Vehicle located in area with good cell reception
Remote Start will terminate:
After 10 minutes or after selected engine timer runs out in navigation vehicles
Brake is pressed without proximity key inside vehicle
Alarm is triggered without proximity key inside vehicle
Door/trunk is opened from inside the vehicle
Notice: Laws in some communities may restrict the use of the features that remotely start the engine. For example, some laws may require a person using the remote start feature to have the vehicle in view when doing so or limit the length of time a vehicle engine may idle. Please check local and state regulations for any requirements and restrictions on remote starting of vehicles and engine idling time.
WARNING!
Do not remote start vehicle in an enclosed environment (i.e., closed garage). Prolonged operation of a motor vehicle in an enclosed environment can cause a harmful build-up of carbon monoxide. Carbon monoxide is harmful to your health. Exposure to high levels of carbon monoxide can cause headaches, dizziness or in extreme cases unconsciousness and/or death. Do not leave children or animals unattended in a vehicle while using the remote start function.
CAUTION!
If the vehicles windshield wipers are left on when the vehicle was last driven, then the wipers will turn on if the remote start function is activated. To avoid damage to the wiper blades (i.e., due to heavy ice or snow accumulated on the windshield), please always turn the vehicles windshield wipers off when parking the vehicle.
ENGINE START STOP
MULTIMEDIA
VELOSTER 2928 HYUNDAI
NAVIGATION
Basic features on the map screen
1 Move to the Home Screen 2 Change the map view mode 3 Voice Guidance On/Off 4 Zoom in the map 5 Set the zoom level automatically
according to the guidance 6 Zoom out the map 7 Quick and easy selection of a
destination and options
8 Touch to scroll the map 9 Quick and easy selection of
a destination from the map screen 10 Set a waypoint to the current route 11 Save frequently used address to
address book 12 Find a POI (Point Of Interest)
around the current position 13 View the vehicles current position
on the map screen
1 13
8
9 10 11 12
2
3 4
5
6
7
Navigation
/
MAP VOICE
MAP
ROUTENAVI
RADIO
FILE TUNE
ENTER
POWER PUSH
A
B DC
Press POWER button C to turn radio on.
TUNING/LISTENING TO CHANNELS
1. Press RADIO A .
2. Rotate TUNE B to desired channel.
NOTE A clear view of the southern sky is recommended to ensure XM radio reception.
SETTING PRESET MEMORY BUTTONS (FM/AM/XM)
Six preset frequencies for each
radio modes can be stored manually.
1. Select the radio mode you want
to store a station into.
2. Select the desired station.
3. Touch and hold one of the preset buttons until audible beep is heard.
ADJUSTING THE SOUND
1. Press SETUP D .
2. Touch Sound on screen.
Touch the arrows on screen to adjust desired sound setting.
ENGINE START STOP
MULTIMEDIA
VELOSTER 3130 HYUNDAI
ENGINE START STOP
Playing Pandora
NOTE Not all smart phones are compatible
1. Ensure you have Pandora app on your smart phone.
2. Pair your smart phone to the Bluetooth system.
3. Select Media on Audio screen.
4. Select Pandora.
5. Initiate Pandora app on your smartphone.
Basic features on the map screen
1 Set destination by address search. 2 Select from previously inputted
addresses and POIs. 3 Search POI Name to search the
destination. 4 Runs Google Local Search. 5 Select the desired item in the
sub-categories. 6 Search and select the desired
destination among the searched items.
7 Search and select the desired destination among the searched items.
8 Search and select the desired destination among the searched items.
9 Search the destination with the address book.
10 Search destination by phone number. 11 Type freeway name and exit/entrance
to search. 12 Type the Street name, the State, and
city name to search. 13 Type coordinates to search.
1
138
9 10 112 3 4
5 6 7
12
MULTIMEDIA
VELOSTER 3332 HYUNDAI
ENGINE START STOP
CAR SETUP
1. Press the SETUP button.
2. Touch the Connectivity icon on screen.
3. Select On for Android Auto.
4. Connect your Android phone to the vehicle USB port. Agree to the notification and disclaimers on your phone then the Android Auto icon will appear confirming the setup.
For more detailed information on how to operate Android Auto, please refer to your navigation manual.
For additional Android Auto support, please refer to the Android Auto Support Website https://support.google.com/androidauto/
Android Auto, Google Play, Android, and other marks are trademarks of Google Inc.
MAP VOICE NAVI INFO SETUP
FILE
TUNE
PHONE SETUP
Turn on Bluetooth on your phone and connect the micro USB cable to your phone and the USB port on the vehicle.
Phone will prompt you to download the Android Auto app and update other needed apps (i.e. Google Maps, Google Play Music, Google Now).
NOTE: Vehicle must be parked.
- Location mode setting should be set to High accuracy.
- Car and phone setup should be completed in one sitting. If phone setup needs to be resumed, recommend to Force Stop the Android Auto app on the Phone then reopen the app and accept the Disclaimer notifications.
ANDROID AUTO
REQUIREMENTS:
- Micro USB cable
- OS Android 5.0 or higher
- Compatible Android Phone
- Data and wireless plan for applicable features
BEFORE YOU BEGIN:
- Android Auto features may operate differently than on your phone.
- Message and data charges may apply when using Android Auto.
- Android Auto relies on the performance of your phone. If you experience performance issues:
- Close all apps and then restart them or
- Disconnect and then reconnect your phone
- Using the micro USB cable that was provided with your phone is recommended.
- When Android Auto is active, your in-vehicle voice recognition system is disabled and you will be using talk to Google to make your requests.
ANDROID AUTO SUPPORT
https://support.google.com/androidauto/
MULTIMEDIA
VELOSTER 3534 HYUNDAI
ENGINE START STOP
CAR SETUP
1. Press the SETUP button.
2. Touch the Connectivity icon on the screen.
3. Touch iOS on the Connectivity Settings screen then touch On to enable Apple CarPlay.
4. Connect your Apple iPhone to the vehicle USB port then touch OK when the pop-up message appears. The Apple CarPlay icon will now appear on the vehicle Home screen confirming the setup.
Apple CarPlay, Apple, and other marks are trademarks of Apple Inc.
REQUIREMENTS
- Apple Lightning cable
- Latest iOS
- iPhone 5 or above
- Data and wireless plan for applicable features
BEFORE YOU BEGIN
- Apple CarPlay features may operate differently than on your phone.
- Message and data charges may apply when using Apple CarPlay.
- Apple CarPlay relies on the performance of your phone. If you experience performance issues:
- Close all apps and then restart them or
- Disconnect and then reconnect your phone
- Using the Apple Lightning cable that was provided with your phone is recommended.
- When Apple CarPlay is active, your voice recognition system is disabled and you will be using Siri to make your requests.
APPLE CARPLAY
PHONE SETUP
On your phone, go to Settings > General > Restrictions > CarPlay to allow CarPlay access.
On your phone, go to Settings > General > Siri and ensure Siri is turned ON.
MULTIMEDIA
VELOSTER 3736 HYUNDAI
ENGINE START STOP
PHONE
Touch the PHONE 5 icon to access the Phone screen. Siri will automatically asks Who you would like to call when the PHONE 5 icon is selected.
NOTE: Phone call sound quality is dependent on the wired connection. Using the Lightning cable that came with the phone is recommended.
APPLE MUSIC
Touch the APPLE MUSIC 6 icon to access the Apple Music screen.
APPLE MAPS
Touch the APPLE MAPS 7 icon to access the Apple Map screen.
MESSAGES
Touch the MESSAGES 8 icon to access the Message screen. Siri will automatically asks To hear unread messages or create a new one when the MESSAGE icon is selected.
3rd PARTY APPS
Supported CarPlay apps that are downloaded on your phone will appear on the CarPlay screen. Touch the apps icons to access those supported apps.
NOTE: A list of the supported CarPlay supported apps can be found at http://www.apple.com/ios/carplay/
Ensure phone has latest version of the 3rd Party Apps.
Apple CarPlay uses Siri to perform many actions like sending messages, placing calls, and looking up/setting POI/Destinations. A Siri session can be initiated on any screen by:
1. Touch and holding the HOME icon 1 on the CarPlay screen or
2. Press the steering wheel VOICE RECOGNITION 13 button.
Note: Ensure Siri feature is set to ON in your phone (Go to Settings > General > Siri).
3. Say any of the following commands;
Text
Read text messages to read available text message.
Call
Find
CarPlay Home Screen
SIRI
1 HOME ICON 2 WIRELESS CONNECTIVTY 3 CELLULAR SIGNAL 4 PHONE TIME 5 PHONE 6 APPLE MUSIC
7 APPLE MAPS 8 MESSAGES 9 3RD PARTY APPS 10 SCREEN PAGE INDICATOR 11 EXIT TO HYUNDAI 12 CURRENT CARPLAY AUDIO PLAYING
2
3
4
1
5 6 7 8
9 10
1112
13
FEATURES AND CONTROLS
VELOSTER 3938 HYUNDAI
Sport Mode Move the shift lever from D to DS to activate Sport Mode.
Sport mode is a recalibrated automatic mode that will hold gears longer and downshift at higher RPM for a more dynamic driving style.
If you use the paddle shifters (or [+] or [-]) to enter the Sport Mode, you will stay in Sport Mode until the shift lever is returned to Drive, giving you full manual control.
TRANSMISSIONS
( ): Depress the brake pedal when shifting.
( ) : The shift lever can be shifted freely.
P : Park
R : Reverse
N : Neutral
D : Drive
Ds : Sport Mode
[+] : Sport Mode Upshift
[] : Sport Mode Downshift
EcoShift Dual Clutch Transmission EcoShift Dual Clutch Transmission technology provides automatic shifting and excellent fuel economy based on manual transmission efciency.
ENGINE START STOP
AUX, USB AND iPod PORT
Use these jacks to connect an external USB, audio or video device.
To view compatible video, connect the device to the supplied Hyundai RCA adapter video cable. Then connect the RCA adapter cable to the AUX jack.
NOTE
To operate your iPod through the vehicles audio system, connect your Apple supplied USB cable to the USB port. iPod is a trademark of Apple Inc.
CLOCK ADJUSTMENT
With Standard Radio
With Navigation 1. Press the button.
2. Touch the Clock button on screen.
3. Select GPS Time to On.
FILE
ENT
MAP
VOICE
1. Press and hold CLOCK A .
2. Touch or to set the clock.
3. Touch Done when finished.
A
FEATURES AND CONTROLS
VELOSTER 4140 HYUNDAI
What is the Transmission High Temperature Warning Message?
Under certain driving conditions such as stop-and-go driving or driving slowly up a hill, the clutches tend to have more slip. This condition tends to heat up the transmission.
If the transmission temperature gets too high, a chime will sound and a warning message will appear in the instrument cluster LCD display.
If this occurs, stop the vehicle as soon as safely possible and allow the transmission to cool with the engine running. After the transmission cools, the vehicle may be driven normally.
Caution A few common conditions that may make the transmission susceptible to overheating include: - Holding the vehicle on an incline with just your foot on the accelerator
pedal TIP: When holding the vehicle on a hill, use the foot brake rather than trying to hold the vehicle by keeping your foot on the accelerator pedal.
- Driving in stop-and-go traffic with frequent accelerating and decelerating at low speed TIP: Allow a gap to form ahead of you before moving the vehicle forward
Under certain conditions, such as stop-and-go driving, launching the vehicle on a steep grade, or backing the vehicle up a long inclined driveway, the transmission clutch temperatures may increase excessively. When the clutch temperature is elevated above the normal operating condition, the high temperature warning message is displayed. If this occurs, stop the vehicle as soon as safely possible and allow the transmission to cool with the engine running and the shift lever in Park (P). After the warning message clears, you can continue to drive the vehicle with caution.
ENGINE START STOP
The paddle shifters operate when the shift lever is in the D position or the Sport Mode.
When you pull the [+] or [] paddle shifter once, the system changes from automatic mode to Sport Mode.
When paddle shifters are no longer used the system changes back to automatic mode.
NOTE
If you pull the [+] and [] paddle shifters at the same time, the transmission will not change gears.
Paddle shifters
Press [] to down shift
Press [+] to up shift
NOTE- EcoShift Dual Clutch Transmission Characteristics
The EcoShift Dual Clutch Transmission behaves just like a manual transmission, but with the added convenience of an automatic transmission. - The dual clutch transmission eliminates the need for a torque
converter. This direct drive structure and the ability to pre-select the upshift gear allows shifts to be quick and responsive with constant power through the shifts.
- The EcoShift Dual Clutch Transmission comes equipped with Hillstart Assist Control. If you remove your foot from the brake pedal while you are stopped on a hill, the vehicle will remain stationary for approximately 2 seconds to prevent the vehicle from roll ing backwards. If you press the accelerator pedal during the two-second period, the vehicle will accelerate. If you wait for over two seconds, the vehicle will enter into creep mode and may roll backwards if the hill is steep.
- Always come to a complete stop before shifting into Park (P), Drive (D), or Reverse (R).
FEATURES AND CONTROLS
VELOSTER 4342 HYUNDAI
ENGINE START STOP
Rearview display
REARVIEW CAMERA The rearview camera will activate when the ignition switch is ON and the shift lever is in the R (Reverse) position.
When the gear shift lever is shifted into reverse (R), the rearview camera displays the area behind the vehicle.
NOTE
The image displayed on the screen may become difficult to see under the following conditions: - In the dark or at night. - When it is raining, or when water droplets are on the camera. - When the sun or the beam of headlights are shining into the camera lens. Use care to keep the camera lens clean and avoid applying any type of solvents, car wax, or window cleaners to the camera lens. If the lens becomes dirty, wipe the lens with a clean, soft cloth.
Shifting into Reverse
1. Fully depress the clutch A
2. Shift into Neutral B
3. Pull the Shift Lever Knob C
4. Shift into Reverse D
A
C
B
D
Manual Transmission
What if Im Driving in Stop-and-Go Trafc?
Whenever possible, come to a complete stop with your vehicle and allow a gap to form in front of you. Then accelerate and move forward.
FEATURES AND CONTROLS
44 HYUNDAI
CONFIRM GOOD BATTERY USING GR8 AND STAPLE TEST TICKET HERE
SET TIRE PRESURE LF RF RR LR VERIFY VEHICLE IS CLEAN, IN GOOD CONDITION,
FREE OF CHIPS AND SCRATCHES CLEAN WINDSHIELD AND BACK WINDOW
ENSURE FLOORMATS ARE SNAPPED INTO PLACE
BEFORE DELIVERY
Sales Consultant Date Sales Manager Date
Customer Date
@
VELOSTER CUSTOMER DELIVERY CHECK LIST
HYUNDAI OWNER DEALERSHIP NAME
SALES CONSULTANT DATE
VIN PREVIOUS VEHICLE
VELOSTER 45
ELECTRONIC STABILITY CONTROL (ESC)
The ESC system is an electronic system designed to help the driver maintain vehicle control under adverse conditions.
Press to turn ESC on or off.
Key Websites Hyundai website - www.hyundai.com
Hyundai owner website - www.myhyundai.com
Bluetooth phone compatibility - www.hyundaiusa.com/bluetooth
Blue Link - www.hyundaiusa.com/technology/bluelink
ENGINE START STOP
TIRE PRESSURE MONITORING SYSTEM (TPMS)
Low Tire Pressure Indicator Illuminates if one or more of your tires is signicantly under-inated.
TPMS Malfunction Indicator Blinks for approximately one minute then remains illuminated when there is a malfunction with the TPMS system. Have the system checked by an authorized Hyundai dealer.
Low tire pressure indicator / TPMS malfunction indicator
Related manuals for Hyundai Veloster Base 2017 Hatchback Quick Reference Guide
Manualsnet FAQs
If you want to find out how the Base Hyundai works, you can view and download the Hyundai Veloster Base 2017 Hatchback Quick Reference Guide on the Manualsnet website.
Yes, we have the Quick Reference Guide for Hyundai Base as well as other Hyundai manuals. All you need to do is to use our search bar and find the user manual that you are looking for.
The Quick Reference Guide should include all the details that are needed to use a Hyundai Base. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.
The best way to navigate the Hyundai Veloster Base 2017 Hatchback Quick Reference Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.
This Hyundai Veloster Base 2017 Hatchback Quick Reference Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.
You can download Hyundai Veloster Base 2017 Hatchback Quick Reference Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.
To be able to print Hyundai Veloster Base 2017 Hatchback Quick Reference Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Hyundai Veloster Base 2017 Hatchback Quick Reference Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.