Hyundai Veloster 2.0 2020 Hatchback Quick Reference Guide PDF

1 of 26
1 of 26

Summary of Content for Hyundai Veloster 2.0 2020 Hatchback Quick Reference Guide PDF

Looking for more detailed information? This Quick Reference Guide does not replace your vehicles Owners Manual, If you require additional information or are unsure of a specific issue, you should always refer to the vehicles Owners Manual or contact your authorized Hyundai dealer. The information contained in this Quick Reference Guide was correct at the time of printing, however, specifications and equipment can change without notice. No warranty or guarantee is being extended in this Quick Reference Guide, and Hyundai reserves the right to change product specifications and equipment at any time without incurring obligations. Some vehicles are shown with optional equipment. Specifications apply to U.S. vehicles only. Please contact your Hyundai dealer for current vehicle specifications.

NP150-V2020 (Rev 03/29/19)

Printing 04/02/19

BLUE LINK pages 24

- Assist with creating MyHyundai.com account - Assist with Blue Link enrollment - Show Blue Link Users Manual - Encourage customer to download the MyHyundai with Blue Link app

Date/Time pages 35 - Demonstrate how to set Date/Time (including daylight savings setting for Navigation equipped vehicles)

DUAL CLUTCH TRANSMISSION pages 37 - Explain DCT characteristics

NAVIGATION (if applicable) page 28 - Demonstrate navigation system POI, enter dealer address

TIRE PRESSURE MONITORING SYSTEM (TPMS) page 43 - Explain TPMS function of customer - When illuminated, one or more tires are

under-inflated - Blinks for approximately one minute then remains illuminated

when there is a malfunction with the TPMS

VEHICLE SETTINGS pages 11 and 27 - Demonstrate vehicle settings in instrument cluster - Demonstrate navigation use, enter dealer address - Show radio presets

The Hyundai VELOSTER

Roadside Assistance: 1-800-243-7766 Consumer Affairs: 1-800-633-5151 Sirius XM Radio: 1-800-967-2346 Blue Link: 1-855-2BLUELINK (1-855-225-8354)

Quick Reference Guide

VOICE RECOGNITION TIPS

Command Example BLUETOOTH

Dial

Call

Dial 7-1-4-9-6-5-3-0-0-0 Call John Smith

Command

(If equipped)

Example NAVIGATION

Find Address

1-2-3-4-5 1st Street, Fountain Valley

Command Example

Located on Rearview Mirror LOCAL SEARCH

Find

Find Lowes near me

Starbucks

Improving how you store your contacts can optimize your Bluetooth Voice Recognition performance: Use full names instead of short or single-syllable names (John or Dad) Avoid using special characters/emojis or abbreviations (Dr.) when saving contacts

Find Find McDonalds

INTRODUCTION AND LOCATION OF THE SERVICE DEPARTMENT

SET FIRST SERVICE APPOINTMENT

REVIEW FACTORY RECOMMENDED MAINTENANCE SCHEDULE

WAS THE CONDITION OF YOUR VEHICLE (AT DELIVERY) TO YOUR SATISFACTION?

Sales Consultant Date Sales Manager Date

Customer Date

Email

@

Scheduled Maintenance (Normal Usage)2.0 MPI 1.6 Turbo-GDI

Engine Oil & Filter Replace 7,500 or 12 mos Replace 6,000 or 12 mos.

Fuel Additives Add 7,500 or 12 mos Add 6,000 or 12 mos.

Battery Condition

Inspect 7,500 or 12 mos Inspect 6,000 or 12 mos

Brake Lines, Hoses & Connections

Front Brake Disc/Pads, Calipers

Rear Brake Disc/Pads

Steering Gear Box, Linkage & Boots, Lower Arm Ball Joint, Upper Arm Ball Joint

Drive Shafts & Boots

Suspension Mounting Bolts

Air Conditioning Refrigerant

Air Conditioning Compressor

Propeller Shaft (AWD)

Exhaust Pipe & Muffler

Air Cleaner Filter Inspect 7,500 or 12 mos Inspect 6,000 or 12 mos

Replace 30,000 or 48 mos. Replace 24,000 or 48 mos.

Vacuum Hose Inspect 7,500 or 12 mos Inspect 6,000 or 12 mos.

Climate Control Air Filter (For Evaporator and Blower Unit) Replace 12 mos Replace 12 mos.

Tire Rotation Perform 7,500 Perform 6,000

Vapor Hose, Fuel Tank Cap, Fuel Tank

Inspect 15,000 or 24 mos. Inspect 12,000 or 24 mos. Fuel Tank Air Filter

Fuel Filter

Parking Brake Inspect 15,000 or 24 mos. Inspect 12,000 or 24 mos.

Brake Fluid

Fuel Lines, Fuel Hoses & Connections Inspect 30,000 or 48 mos. Inspect 24,000 or 48 mos.

Rear Axle Oil (AWD) Inspect 30,000 or 48 mos. Inspect 24,000 or 48 mos.

Transfer Case Oil (AWD)

Drive Belts Inspect First 60,000 or 72 mos.

Inspect First 60,000 or 72 mos.

Subsequent, every 15,000 or 24 mos.

Subsequent, every 12,000 or 24 mos.

Spark Plugs Replace 97,500 Inspect 42,000

Engine Coolant Replace First 120,000 or 120 mos.

Replace First 120,000 or 120 mos.

Subsequent, every 30,000 or 24 mos.

Subsequent, every 30,000 or 24 mos.

Valve Clearance (Only 1.6 T-GDI) Inspect - Inspect 60,000 or 72 mos.

Intercooler, in/out hose, air intake hose (Only 1.6 T-GDI) Inspect - Inspect 6,000 or 12 mos.

EcoShift Dual Clutch Transmission Fluid (Only 1.6 T-GDI) - Inspect 6,000 or 12 mos.

Automatic Transmission Fluid (Only 2.0)

No check or services required for Normal Usage driving. _

*See Owners Manual for details.

MAINTENANCE Unit: mile

HYUNDAI VEHICLE OWNER PRIVACY POLICY

Your Hyundai vehicle may be equipped with technologies and services that use information collected, generated, recorded or stored by the vehicle. Hyundai has created a Vehicle Owner Privacy Policy to explain how these technologies and services collect, use, and share this information.

You may read our Vehicle Owner Privacy Policy on the Hyundaiusa.com website at https://www.hyundaiusa.com/owner-privacy-policy.aspx If you would like to receive a hard copy of our Vehicle Owner Privacy Policy, please contact our Customer Connect Center at:

Hyundai Motor America Hyundai Customer Connect Center P.O. Box 20850 Fountain Valley, CA 92728-0850 800-633-5151 consumeraffairs@hmausa.com

Hyundai's Customer Connect Center representatives are available Monday through Friday, between the hours of 5:00 AM and 7:00 PM PST and Saturday and Sunday between 6:30 AM and 3:00 PM PST (English). For Customer Connect Center assistance in Spanish or Korean, representatives are available Monday through Friday between 6:30 AM and 3:00 PM PST.

WARNING!

To reduce the risk of serious injury to yourself and others, read and understand the important SAFETY INFORMATION in your Owners Manual.

HOME

PASSANGER PASSANGER

AIR BAG

FEATURES AND CONTROLS

Engine Start/Stop button 02 Central door lock switch 06 Child-protector rear door lock 10 Climate control 17 Drivers main controls 06 Fuel door 05 Headlights 07 Head-up display 13 Instrument cluster 11 Instrument panel illumination 15 Interior lights 10 Liftgate operation 04 Remote keyless entry 01 Seat-Front seat adjustment 03 Seat-Headrest adjustment 03 Seat-Seat belt adjustment 04 Steering wheel adjustments 05 Sunroof 09 Trip computer 15 Warnings and indicators 16 Wiper and washer 08

MULTIMEDIA

Android Auto 29 Apple CarPlay 31 Audio mode 27 AUX, USB and iPod Port 35 Blue Link Telematics system 24 Bluetooth operational tips 22 Bluetooth phone pairing 21 Date/time adjustment 35 Navigation 28 Steering wheel audio control 22 Voice recognition tips 23 Wireless cellular phone charging system 36

DRIVING

Cruise control/Smart cruise control 41 Electronic Stability Control (ESC) 44 Rearview camera 42 Transmissions 37 Tire Pressure Monitoring System (TPMS) 43

* Some vehicles may not be equipped with all the listed features.

Steering wheel adjustments Page 05

Headlights and fog lights Page 07

Audio mode/ Navigation Pages 27

Wiper and washer Page 08

Climate control Pages 17

Instrument cluster Pages 11

Transmission Pages 37

Use this Quick Reference Guide to learn about the features that will enhance your enjoyment of your Hyundai. More detailed information about these features are available in your Owners Manual.

FEATURES AND CONTROLS

VELOSTER 0201 HYUNDAI

REMOTE KEYLESS ENTRY

Drivers door Lock/Unlock Smart key must be within range.

Press: Once Unlock driver door Twice Unlock all doors Third Lock all doors

Remove mechanical key Press and hold the release A button and remove the key.

Reinstall mechanical key Put the key into the key slot and push it until a click sound is heard.

Lock

Unlock

Tailgate unlock (press and hold)

Panic

ENGINE START/STOP BUTTON

HOME

With the ignition OFF, press the engine start/stop button: Once for ACC (Accessory) mode. Twice for ON mode. Three times for OFF.

To start the engine, press the start/stop button while: EcoShift Dual Clutch Transmission: depressing the brake pedal. Manual Transmission: depressing the clutch and brake pedal.

To shut engine OFF, shift to: EcoShift Dual Clutch Transmission: P (Park) and press the

start/stop button.

Manual Transmission: Select Neutral, apply the hand brake, and press the start/stop button.

Emergency situations Shut off engine while driving:

Press engine start/stop button for more than 2 seconds or press it 3 times consecutively within 3 seconds.

Restart engine while driving: Press engine start/stop button with shift lever in N (Neutral).

HOME

A

FEATURES AND CONTROLS

VELOSTER 0403 HYUNDAI

FRONT SEAT ADJUSTMENT

A

B

B

Forward / backward

Seat height (drivers seat only)

Seatback angle

Folding Lever (drivers seat only)

C

C

A

D

E

D

HEADREST ADJUSTMENT

To Raise Headrest: Pull headrest up.

To Lower Headrest: Press lock knob while pressing down on headrest.

PRESS

SEAT BELT ADJUSTMENT (Drivers Front seat)

Set the belt extension guide to one of the 3 positions when using the seat belt.

See Owners Manual for additional seat belt information.

1

2

3

Lumbar support (drivers seat only)

E

LIFTGATE OPERATION

Press to open. Smart key must be within the range.

Press and hold to unlock.

FEATURES AND CONTROLS

VELOSTER 0605 HYUNDAI

Tilt

STEERING WHEEL ADJUSTMENTS

NOTE: Do not adjust while driving.

1. Pull the lever A down to release. 2. Set the angle B and distance C

3. Pull the lever A up to lock.

Telescopic A

B C

NOTE After adding fuel, always reinstall the fuel cap onto the filler neck by rotating it clockwise until it clicks once.

Failure to do this may result in the Check Engine Light ( ) illuminating.

FUEL DOOR

DRIVERS MAIN CONTROLS

Outside Rearview Mirrors Move the switch A to the right or left to adjust the outside rearview mirrors.

Depress the appropriate direction

( ) on the switch. Middle position Push the switch left or right to select mirror to adjust. To lock adjustment controls, position the switch to the middle position.

Window Auto down/up (drivers side only) Press to fully open/close window.

Power Window Lock Switch Disables the power window switches on the passenger doors.

Push down to disable passenger power window controls.

CENTRAL DOOR LOCK SWITCH

A

All doors will lock. All doors will unlock.

1. To open fuel door, pull lever upward

2. Rotate the fuel cap counter clockwise to open.

FEATURES AND CONTROLS

VELOSTER 0807 HYUNDAI

HEADLIGHTS

Turns parking lights on

All lights off

Turns headlights on

Headlights will illuminate automatically as needed

Escort Function Headlights will stay on for approximately 30 seconds after exiting and locking vehicle. Press remote lock button twice to turn headlight off.

See Owners Manual for more details.

High beam High beam assist

Turn signals A and lane change signals B

Flashing headlights

WIPER AND WASHER

Rear Wiper and Washer

HI - High wiper operation

LO - Low wiper operation

OFF - Wiper off

Front intermittent wiper time adjustment

More frequent wipes

Less frequent wipes

Front Wiper and Washer

PULL

PUSH

OFF

MIST

INT

LO

HI

Smart High Beam Function 1. Select auto position on stalk. 2. Push lever forward to engage Auto High beam. 3. Push lever forward again to disengage. See Owner's Manual for more details.

Wash with Brief Wipes

Push away for rear wash

MIST - Single wipe

OFF - Off

INT - Intermittent wipe or AUTO - Auto control wipe

LO - Low wiper speed

HI - High wiper speed

Pull the lever toward you.

FEATURES AND CONTROLS

VELOSTER 1009 HYUNDAI

SUNROOF

Sliding the sunroof

To Open Press the sunroof control lever backward momentarily until desired position is reached. Press the sunroof control lever backward past the second detent and release lever to open completely.

To Close Press the control lever forward and hold until sunroof is closed.

To Tilt Open

Push the sunroof control switch upward to tilt the sunroof.

Close

Press the sunroof control switch forward and hold until sunroof is closed.

Tilting the sunroof

INTERIOR LIGHTS

1. Map light Press the lens A to turn map lights ON or OFF.

2. Door position Map light and cabin light will turn on when any door is open except tailgate.

3. Cabin Light ON position Press the switch B to the left to turn on cabin light.

4. Cabin light OFF position Press the switch B to the right to leave cabin light off.

B

Map lamp

Cabin lamp

CHILD-PROTECTOR REAR DOOR LOCK Allows or prevents opening the rear door from inside of the vehicle.

Lock ( ) Insert a key into the hole and turn it to the lock ( ) position.

Unlock Insert a key into the hole and turn it clockwise to the unlock position.

OPEN CLOSE

A A

B

FEATURES AND CONTROLS

VELOSTER 1211 HYUNDAI

INSTRUMENT CLUSTER

Type A

Type B

Type C

1 Tachometer 2 Engine Coolant Temperature Gauge 3 Turn signal indicators 4 Odometer/Trip computer 5 Warning and indicator lights 6 Fuel Gauge 7 Speedometer

1

1

1

2

2

2

3 3

3

3

3

3

4

4 4

5

5 5 6

6

6

7

7

7

FEATURES AND CONTROLS

VELOSTER 1413 HYUNDAI

HEAD-UP DISPLAY

55

55

MPH65

SPEED LIMIT

The Heads-Up display is a feature that allows the driver to view information projected onto a transparent screen while still maintaining direct view of the road ahead.

To activate the Heads-Up Display, press the HUD button on the dash panel located on the left-hand side of the driver.

Head-Up Display information

1. Road information 2. Lane Keeping Assist (LKA) information 3. Warning lights 4. Cruse control system SET indicator 5. Driving speed information 6. Blind Spot Collision warning indicators 7. Turn-by-turn (TBT) navigation information 8. Multimedia information

1. Road signs 2. Revolutions per minute (rpm) 3. Speedometer 4. Blind-spot Collision Warning (BCW) system information(if equipped) 5. Warning lights and Audio/Video information.

1

1

2

2

3

3

4

4

5

5

6 7

8

Sport Mode

FEATURES AND CONTROLS

VELOSTER 1615 HYUNDAI

WARNINGS AND INDICATORS

Seat belt warning light

Air bag warning light

Low Tire Pressure Indicator / TPMS (Tire Pressure Monitoring System) malfunction indicator

ABS warning light

Light on indicator

Tailgate open warning light

Electric Power Steering system warning light

Manual transmission shift indicator

High beam indicator

Cruise indicator

Parking brake & Brake fluid warning light

Engine oil pressure warning light

Charging system warning light

Malfunction indicator light

ESC (Electronic Stability Control) indicator

Low fuel level warning light

ESC(Electronic Stability Control) OFF indicator Cruise SET indicator

EcoShift Dual clutch transmission indicator

Door open warning light

Engine coolant temperature warning light

Turn signal indicator

Active ECO indicator

Immobilizer indicator

KEY OUT indicator Low beam indicator

INSTRUMENT PANEL ILLUMINATION Push -/+ on the control switch to adjust the brightness.

_ +

_ +

Fuel Economy Accumulated Info Drive Info

Current MPHTransmission Temperature

TRIP COMPUTER

Drive Mode

1 : MODE button for changing modes

2 : MOVE switch for changing items

3 : SELECT / RESET button for setting

or resetting the selected item

1

2

3

FEATURES AND CONTROLS

VELOSTER 1817 HYUNDAI

MODE SELECTION

Face Level

Face & Floor Level

Floor Level

Floor Defrost Level

AIR INTAKE CONTROL

Outside (fresh) air position

Recirculated air position

CLIMATE CONTROL

A Fan speed control knob B Mode selection buttons C Temperature control knob D Air Conditioning button

A

DE F G

H

CB

E Front windshield defroster button F Rear window defroster button G Air intake control button H MAX Air Conditioning position

REAR WINDOW DEFROSTER

DEFROSTING / DEFOGGING

Press to activate / deactivate the rear window defroster.

1. Press the front windshield defroster control.

2. Set the temperature control to the warmest setting.

3. Set the fan speed to the medium setting.

NOTE To reduce the tendency of the glass fogging and improve visibility, keep the interior surface of the windshield clean by wiping it with a clean cloth and glass cleaner. In addition, select air intake control to the outside (fresh) air position whenever possible while operating the vehicle.

Manual

FEATURES AND CONTROLS

VELOSTER 2019 HYUNDAI

A Temperature control knob B Mode selection button C Climate display button D Fan speed control buttons

E Air Conditioning button F Front windshield defroster button G Rear window defroster button H Air intake control position

OFF

AUTO

CLIMATE

AUTO

_

_

+

OFF

AUTO

CLIMATE

AUTO

_

_

+

Press to activate / deactivate the rear window defroster.

1. Press the front windshield defroster control.

OFF

AUTO

CLIMATE

AUTO

_

_

+

OFF

AUTO

CLIMATE

AUTO

_

_

+

2. Set the temperature control to the warmest setting.

3. Set the fan speed to the medium setting.

NOTE To reduce the tendency of the glass fogging and improve visibility, keep the interior surface of the windshield clean by wiping it with a clean cloth and glass cleaner. In addition, select air intake control to the outside (fresh) air position whenever possible while operating the vehicle.

OFF

AUTO

CLIMATE

AUTO

_

_

+

A D

E

F G H

CB

Automatic DEFROSTING / DEFOGGING

REAR WINDOW DEFROSTER

MODE SELECTION

Face Level

Face & Floor Level

Floor Level

Floor Defrost Level

AIR INTAKE CONTROL

Outside (fresh) air position

Recirculated air position

MULTIMEDIA

VELOSTER 2221 HYUNDAI

1

2

3

4

STEERING WHEEL AUDIO CONTROL

1 VOICE RECOGNITION Activates the voice recognition system.

2 SEEK / PRESET ( / ) Changes station.

3 MODE Changes the audio source.

4 VOLUME (VOL + / -) Increase or decrease the volume. Press to Mute.

Please visit www.hyundaiusa.com/Bluetooth for a list of compatible phones tested to work with Hyundais Bluetooth system.

Pairing tutorials, phone compatibility and Operational tips can be found through the Smart QR code using the QR reader application on your Smartphone.

BLUETOOTH PHONE PAIRING

Phone setup (pairing phone)

1. Press PHONE button on the radio or on the steering wheel.

2. Press the Bluetooth button on the screen. 3. Press Add New button on the screen. 4. Search for the device name as displayed

on your mobile phone and connect. 5. If necessary, input the passkey displayed

on the Audio screen. 6. Pairing is complete.

NOTE Vehicle must be in park to complete pairing process.

BLUETOOTH OPERATIONAL TIPS In the following situations you or the other party may have difficulty hearing each other:

1. When the Bluetooth volume is at a high level. To reduce echo and distortion, try lowering the volume.

2. When driving on a rough road, high speeds and/or with the window open.

3. When the air conditioning vents are facing the microphone and/or when the air conditioning fan is at the max speed.

Bluetooth control A CALL Place and transfer call. B END End call or cancel function. C TALK Activate voice recognition.

A B

C

To Answer a Call: Press button on the steering wheel.

To Reject a Call: Press button on the steering wheel.

To Adjust Ring Volume: Use the VOLUME buttons on the steering wheel.

To Transfer a Call to the Phone (Private Mode): Press and hold button on the steering wheel until the

audio system transfers a call to the phone.

To Finish a Call: Press button on the steering wheel.

MULTIMEDIA

VELOSTER 2423 HYUNDAI

BLUE LINK TELEMATICS SYSTEM

SOS

Navigation Services

Blue Link

Blue Link subscription is required. To enroll, please visit your dealership or MyHyundai.com. Press the button for access to the voice-response menu of services. - You can say:

Service Link Roadside Assistance Blue Link Account Assistance Help Cancel

Press the button for Destination search by Voice.

- For vehicle equipped with factory-installed navigation systems.

- For non-navigation, this button functions with Android Auto or Apple CarPlay.

Press the button for SOS Emergency Assistance.

Visit HyundaiBlueLink.com for more information or refer to your Blue Link Users Manuall for detailed information on system operation.

For immediate assistance with subscription services, please call 1-855-2BLUELINK (1-855-225-8354).

GoogleTM is a registered trademark of Google, Inc.

Making a call using voice recognition:

The menu tree identifies available voice recognition Bluetooth functions.

Calling by Name: 1. Press button. 2. Say the following command: Call : Connects the call to John. Call on : Connects the call

to Johns Mobile, Home, or Office phone number. Dialing by Number: 1. Press button. 2. Say Dial Number. 3. Say desired phone numbers. 4. Say Dial to complete the call. For complete list of commands, refer to your Owners Manual.

VOICE RECOGNITION TIPS

Your vehicle is equipped with Voice Recognition technology, which allows drivers to operate their phones without having to take their eyes off the road to minimize distractions.

Voice recognition performance may be affected if driving with windows and sunroof open; when the heating-cooling system is on; when passing through a tunnel or when driving on rugged and uneven roads.

Quick reference on using voice commands

To start voice command. Press the key, the following commands are available:

Command Function Help Provides guidance on commands that can be used within the current mode. Calls Calls saved in Contacts. Ex) Call John Dial Call can be made by dialing the spoken numbers. Ex) Call 123

Phone Provides guidance on Phone related commands. After saying this command, say Call History, Contacts to execute corresponding functions.

Call History Displays the Call History screen.

Contacts (Call by Name)

Displays the Contacts screen. After saying this command, say the name of a contact saved in the Contacts to automatically connect the cell.

MULTIMEDIA

VELOSTER 2625 HYUNDAI

You can download the MyHyundai with Blue Link app to your compatible smart phone from the following sites: iPhone Apple App Store Android Google Play

Remote Start enables you to remotely start your vehicle from virtually anywhere. For vehicles equipped with full-automatic temperature control, you can also enable climate control remotely and turn on the front window defroster, ensuring a warm or cool car is ready to go when you are. NOTE: Temperature will be set to temperature set at last use.

To use this feature, you must have a Blue Link Personal Identification Number (PIN). To create or change your PIN, log on to www.MyHyundai.com or open the MyHyundai app.

Remote Start

The MyHyundai with Blue Link App

Remote Start will automatically shut off after 10 minutes or after selected engine timer runs out.

While this feature is active, the parking lights will blink until vehicle is turned off or when vehicle is in operation.

To continue operation of the vehicle, the proximity key must be inside the vehicle with the driver prior to pressing the brake and being able to move the gearshift from the P (Park) position.

Remember:

Visit HyundaiBlueLink.com FAQs to see a list of compatible devices.

NOTE: Remote Start is not available on all models. Remote Start is only available for Push Start equipped vehicle with an Automatic Transmission or Dual Clutch Transmission (DCT). Remote Start with Climate Control additionally requires Fully Automatic Temperature Control.

Preconditions: Ignition is OFF Alarm is armed (i.e., vehicle locked by key fob Remote Door Lock) Gearshift level is in the P (Park) position Brake pedal is not depressed Engine hood is securely closed All the doors are closed and locked The tailgate or trunk lid is closed The security/panic system is not activated The battery power is not low Vehicle is located in an open area It has been less than 4 days since last vehicle ignition off Vehicle located in area with good cell reception

Remote Start will terminate: After 10 minutes or after selected engine timer runs out Brake is pressed without proximity key inside vehicle Alarm is triggered without proximity key inside vehicle Door/trunk is opened from inside the vehicle

Notice: Laws in some communities may restrict the use of the features that remotely start the engine. For example, some laws may require a person using the remote start feature to have the vehicle in view when doing so or limit the length of time a vehicle engine may idle. Please check local and state regulations for any requirements and restrictions on remote starting of vehicles and engine idling time.

WARNING! Do not remote start vehicle in an enclosed environment (i.e., closed garage). Prolonged operation of a motor vehicle in an enclosed environment can cause a harmful build-up of carbon monoxide. Carbon monoxide is harmful to your health. Exposure to high levels of carbon monoxide can cause headaches, dizziness or in extreme cases unconsciousness and/or death. Do not leave children or animals unattended in a vehicle while using the remote start function.

CAUTION!

If the vehicles windshield wipers are left on when the vehicle was last driven, then the wipers will turn on if the remote start function is activated. To avoid damage to the wiper blades (i.e., due to heavy ice or snow accumulated on the windshield), please always turn the vehicles windshield wipers off when parking the vehicle.

MULTIMEDIA

VELOSTER 2827 HYUNDAI

HOME

NOTE A clear view of the southern sky is recommended to ensure SXM radio reception.

SETTING PRESET BUTTONS (FM/AM/SXM)

40 preset frequencies for each radio modes can be stored manually.

1. Select the radio mode you want to store a station into. 2. Select the desired station. 3. Touch and hold one of the preset

buttons until audible beep is heard.

ADJUSTING THE SOUND

1. Press SETUP button C . 2. Touch Sound on screen.

Touch the arrows on screen to adjust desired sound setting.

AUDIO MODE

A B D

C

*SiriusXM is only available on Display Audio Light and Navigation

Press POWER button A to turn radio on.

TUNING/LISTENING TO CHANNELS

1. Press RADIO button B . 2. Rotate TUNE knob D to desired channel.

NAVIGATION

Basic features on the map screen

1 Move to the Home Screen 2 Change the map view mode 3 Voice Guidance On/Off 4 Zoom in the map 5 Set the zoom level automatically

according to the guidance 6 Zoom out the map 7 Quick and easy selection of a

destination and options

8 Touch to scroll the map 9 Quick and easy selection of

a destination from the map screen 10 Set a waypoint to the current route 11 Save frequently used address to

address book 12 Find a POI (Point Of Interest)

around the current position 13 View the vehicles current position

on the map screen

1 13

8

9 10 11 12

2

3

4

5

6

7

1 Set destination by address search 2 Select from previously inputted

addresses and POIs 3 Online search 4 Select the desired item in the sub-

categories 5 Search and select the desired

destination among the search items

1

8

92 3 4

5 6 7

6 Search and select the desired destination among the search items

7 Search and select the desired destination among the search items

8 Search the destination with the address book

9 Type coordinates to search

Press [NAV] button in the navigation head unit, and find a destination by using the [Destination] menu.

Press [MAP] button in the navigation head unit.

Destination search screen

MULTIMEDIA

VELOSTER 3029 HYUNDAI

CAR SETUP

1. Press the SETUP button. 2. Touch the Phone Projection icon on the screen. 3. Select On for Android Auto. 4. Connect your Android phone to the vehicle USB port. Agree to the notification and disclaimers on your phone then the Android Auto icon will appear confirming the setup.

For more detailed information on how to operate Android Auto, please refer to your navigation manual.

For additional Android Auto support, please refer to the Android Auto Support Website https://support.google.com/androidauto/

Android Auto, Google Play, Android, and other marks are trademarks of Google Inc.

HOME

PHONE SETUP

Activate Bluetooth on your phone and connect the USB cable from your mobile device to the USB Port in your vehicle.

Phone will prompt you to download the Android Auto app and update other needed apps (i.e. Google Maps, Google Play Music, Google Now).

NOTE: Vehicle must be parked. - Location mode setting should be set to High accuracy. - Car and phone setup should be completed in one sitting. If phone setup needs to be resumed, recommend to Force Stop the Android Auto app on the Phone then reopen the app and accept the Disclaimer notifications.

ANDROID AUTO

REQUIREMENTS: - USB cable - OS Android 5.0 or higher - Compatible Android Phone - Data and wireless plan for applicable features

BEFORE YOU BEGIN: - Android Auto features may operate differently than on your phone. - Message and data charges may apply when using Android Auto. - Android Auto relies on the performance of your phone. If you experience performance issues: - Close all apps and then restart them or - Disconnect and then reconnect your phone - Using the USB cable that was provided with your phone is recommended. - When Android Auto is active, your in-vehicle voice recognition system is disabled and you will be using talk to Google to make your requests.

ANDROID AUTO SUPPORT

https://support.google.com/androidauto/

MULTIMEDIA

VELOSTER 3231 HYUNDAI

CAR SETUP

1. Press the SETUP button. 2. Touch the Phone Projection icon on the screen. 3. Touch iOS on the Connectivity Settings screen then touch On to enable Apple CarPlay. 4. Connect your Apple iPhone to the vehicle USB port then touch OK when the pop-up message appears. The Apple CarPlay icon will now appear on the vehicle Home screen confirming the setup.

Apple CarPlay, Apple, and other marks are trademarks of Apple Inc.

REQUIREMENTS - Apple Lightning cable - Latest iOS - iPhone 5 or above - Data and wireless plan for applicable features

BEFORE YOU BEGIN - Apple CarPlay features may operate differently than on your phone. - Message and data charges may apply when using Apple CarPlay. - Apple CarPlay relies on the performance of your phone. If you experience performance issues: - Close all apps and then restart them or - Disconnect and then reconnect your phone - Using the Apple Lightning cable that was provided with your phone is recommended. - When Apple CarPlay is active, your voice recognition system is disabled and you will be using Siri to make your requests.

APPLE CARPLAY

PHONE SETUP On your phone, go to Settings > General > CarPlay to allow CarPlay access. On your phone, go to Settings > Siri and ensure Siri is turned ON.

MULTIMEDIA

VELOSTER 3433 HYUNDAI

PHONE Touch the PHONE 5 icon to access the Phone screen. Siri will automatically asks Who do you want to call when the PHONE 5 icon is selected.

NOTE: Phone call sound quality is dependent on the wired connection. Using the Lightning cable that came with the phone is recommended.

APPLE MUSIC Touch the APPLE MUSIC 6 icon to access the Apple Music screen.

APPLE MAPS Touch the APPLE MAPS 7 icon to access the Apple Map screen.

MESSAGES Touch the MESSAGES 8 icon to access the Message screen. Siri will automatically asks Want to hear unread messages or create a new one' when the MESSAGE icon is selected.

3rd PARTY APPS Supported CarPlay apps that are downloaded on your phone will appear on the CarPlay screen. Touch the apps icons to access those supported apps.

NOTE: A list of the supported CarPlay supported apps can be found at http://www.apple.com/ios/carplay/

Ensure phone has latest version of the 3rd Party Apps.

Apple CarPlay uses Siri to perform many actions like sending messages, placing calls, and looking up/setting POI/Destinations. A Siri session can be initiated on any screen by: 1. Touch and holding the HOME icon 1 on the CarPlay screen or 2. Press the steering wheel VOICE RECOGNITION 13 button. Note: Ensure Siri feature is set to ON in your phone (Go to Settings > Siri). 3. Say any of the following commands; Text Call you later to send a text message. Read text messages to read available text message. Call to make a phone call. Find to locate a POI/Destination.

CarPlay Home Screen

SIRI

1 HOME ICON 2 WIRELESS CONNECTIVTY 3 CELLULAR SIGNAL 4 PHONE TIME 5 PHONE 6 APPLE MUSIC

7 APPLE MAPS 8 MESSAGES 9 3RD PARTY APPS 10 SCREEN PAGE INDICATOR 11 EXIT TO HOME SCREEN 12 CURRENT CARPLAY AUDIO PLAYING

2

3

4

1

5 6 7 8

9 10

1112

13

VELOSTER 36

MULTIMEDIA

35 HYUNDAI

AUX, USB AND iPod PORT

Use the AUX or USB ports to connect an external audio device and listen to it through the audio system in your vehicle.

Use this USB port to access Android Auto or Apple CarPlay with your compatible phone.

iPod is a trademark of Apple Inc.

HOME

HOME

DATE/TIME ADJUSTMENT

HOME

1. Press the SETUP button A .

2. Swipe right to the second page and press the Date/Time icon.

3. Set time and date.

4. Press the back button to save setting.

A

WIRELESS CELLULAR PHONE CHARGING SYSTEM

There is a wireless cellular phone charging system inside the front console. The system operates with all doors closed, and the ignition switch is in the ACC/ON position.

NOTE

The wireless cellular phone charging system supports only the Qi-enabled cellular phones ( ).

NOTE Do not place any metallic items such as coins, keys on the charger. Avoid putting credit cards, etc. on the charger as they might get damaged by the magnetic field.

DRIVING

VELOSTER 3837 HYUNDAI

The paddle shifters operate when the shift lever is in the D position or the Sport Mode. When you pull the [+] or [] paddle shifter once, the system

changes from automatic mode to Sport Mode. When paddle shifters are no longer used, the system changes

back to automatic mode. NOTE If you pull the [+] and [] paddle shifters at the same time, the transmission will not change gears.

Paddle shifters

Press [] to down shift

Press [+] to up shift

Sport Mode

Move the shift lever from D to DS to activate Sport Mode.

Sport mode is a recalibrated automatic mode that will hold gears longer and downshift at higher RPM for a more dynamic driving style.

If you use the paddle shifters (or [+] or [-]) to enter the Sport Mode, you will stay in Sport Mode until the shift lever is returned to Drive, giving you full manual control.

TRANSMISSIONS

( ) : Depress the brake pedal when shifting.

( ) : The shift lever can be shifted freely.

P : Park

R : Reverse

N : Neutral

D : Drive

Ds : Sport Mode

[+] : Sport Mode Upshift

[] : Sport Mode Downshift

The purpose for the dual clutch transmission in your vehicle is to allow for better acceleration performance and increased fuel efficiency. This type of transmission can be thought of as an automatically-shifting manual transmission. It differs from a conventional automatic in how the engine is connected to the transmission. Theres no torque converter. This creates more of a direct-drive feel, with the transition from one gear to the next managed by clutch slip, especially at lower speeds. As a result, shifts are sometimes more noticeable, and a light vibration can be felt as the transmission speed is matched with the engine speed. This is a normal condition of the dual clutch transmission.

Dual Clutch Transmission

DRIVING

VELOSTER 4039 HYUNDAI

Shifting into Reverse

1. Fully depress the clutch A

2. Shift into Neutral B

3. Pull the Shift Lever Knob C

4. Shift into Reverse D

A

C

B

D

Manual Transmission

What is the Transmission High Temperature Warning Message? Under certain driving conditions such as stop-and-go driving or

driving slowly up a hill, the clutches tend to have more slip. This condition tends to heat up the transmission.

If the transmission temperature gets too high, a chime will sound and a warning message will appear in the instrument cluster LCD display.

If this occurs, stop the vehicle as soon as safely possible and allow the transmission to cool with the engine running. After the transmission cools, the vehicle may be driven normally.

What if Im Driving in Stop-and-Go Traffic? Whenever possible, come to a complete stop with your vehicle and

allow a gap to form in front of you. Then accelerate and move forward.

Refer to your Owners Manual for additional info on the DCT.

DCT Helpful Tips While Driving

Follow the helpful guidelines below to enhance your driving experience with your vehicle.

- When holding your vehicle on a hill or driving slowly up a hill, apply the brakes rather than trying to hold the vehicle by keeping your foot on the accelerator pedal.

- Try to avoid spending too much time inching or creeping forward, especially when moving slowly up an incline. This generates heat in the transmission quickly.

- When traffic is slowly creeping forward, let a gap form in front of you, then start to move forward. This will allow the clutch to engage and minimize the amount of slip.

ANTICIPATING HOW YOUR VEHICLE RESPONDS The dual clutch transmission is designed to anticipate and select the next available gear when accelerating or decelerating. In most instances, this allows for quicker shifts and improved fuel economy because energy loss is minimized between the engine and the transmission. If, however, you attempt to accelerate rapidly when your vehicle is slowing down, (for example, when approaching a red light and then the light turns green), you may experience a delay because it takes longer for the transmission to re-select and shift into the proper gear.

DRIVING

VELOSTER 4241 HYUNDAI

CRUISE CONTROL/SMART CRUISE CONTROL

2

3

1

4

Setting Vehicle Distance (Smart Cruise Control only)

The Cruise Control system allows you to program the vehicle to maintain a constant speed without pressing the accelerator pedal.

1

2 The system assists you in setting the distance from the vehicle ahead and will maintain the selected distance without having to press on the accelerator or the brake pedal.

1 Push CRUISE button to turn cruise control ON/OFF.

2 Push the toggle switch UP to resume or increase cruise control speed.

3 Push the toggle switch DOWN to set or decrease the cruise control speed. 4 Push CANCEL to cancel cruise control.

The vehicle-to-vehicle distance 1 will automatically activate when you set the cruise speed 2 . Each time the button is pressed, the vehicle- to-vehicle distance changes as follows:

Distance 2

Distance 3 (Default Setting)

Distance 1

Setting Cruise Control 1. Press the CRUISE button 1 to turn on Cruise Control. The icon will illuminate in the instrument cluster. 2. Toggle -SET switch (3) DOWN to set cruising speed.

Adjusting the vehicle speed 1. Toggle +RES switch 2 UP to increase cruising speed. 2. Toggle -SET switch 3 DOWN to decrease cruising speed.

Note Quick toggle up/down will change speed by 1 mph. Holding switch up/down will change speed by 5 mph.

To Cancel Cruise Control Press the CANCEL button 4 or depress the brake pedal.

Rearview display

REARVIEW CAMERA

The rearview camera will activate when the ignition switch is ON and the shift lever is in the R (Reverse) position.

When the gear shift lever is shifted into reverse (R), the rearview camera displays the area behind the vehicle.

NOTE The image displayed on the screen may become difficult to see under the following conditions: - In the dark or at night. - When it is raining, or when water droplets are on the camera. - When the sun or the beam of headlights are shining into the camera lens. Use care to keep the camera lens clean and avoid applying any type of solvents, car wax, or window cleaners to the camera lens. If the lens becomes dirty, wipe the lens with a clean, soft cloth.

DRIVING

VELOSTER 4443 HYUNDAI

TIRE PRESSURE MONITORING SYSTEM (TPMS)

LOW TIRE PRESSURE INDICATOR Illuminates if one or more of your tire is significantly under-inflated.

TPMS MALFUNCTION INDICATOR Blinks for approximately one minute, then remains illuminated when there is a malfunction with the TPMS. Inspect all tires and adjust the tire pressure to specification. If the lamp remains illuminated, have the system checked by an authorized Hyundai dealer as soon as possible.

LOW TIRE PRESSURE POSITION INDICATOR AND TIRE PRESSURE INDICATOR (LCD DISPLAY) Tire pressures will display after driving a short distance. If a tire pressure drops lower than predetermined specification, the Low Tire Pressure Indicator will illuminate and the LCD display will indicate tire(s) requiring air. The Tire Specification and Pressure Label located on the driver's side center pillar gives the tire pressures recommended for your car.

Low Tire Pressure Position Indicator and Tire Pressure Indicator ( Shown on the LCD display )

Low Tire Pressure Indicator / TPMS Malfunction Indicator

ELECTRONIC STABILITY CONTROL (ESC)

The ESC system is an electronic system designed to help the driver maintain vehicle control under adverse conditions.

Press to turn ESC on or off.

Key Websites Hyundai website - www.hyundai.com Hyundai owner website - www.myhyundai.com Bluetooth phone compatibility - www.hyundaiusa.com/bluetooth Blue Link - www.hyundaiusa.com/technology/bluelink

VELOSTER 46

MEMO

45 HYUNDAI

CONFIRM GOOD BATTERY USING GR8 AND STAPLE TEST TICKET HERE

SET TIRE PRESURE LF RF RR LR VERIFY VEHICLE IS CLEAN, IN GOOD CONDITION,

FREE OF CHIPS AND SCRATCHES CLEAN WINDSHIELD AND BACK WINDOW

ENSURE FLOORMATS ARE SNAPPED INTO PLACE

BEFORE DELIVERY

VELOSTER CUSTOMER DELIVERY CHECK LIST

HYUNDAI OWNER DEALERSHIP NAME

SALES CONSULTANT DATE

VIN PREVIOUS VEHICLE

B LU

E TO

O TH

H

A N

D S

-F R

E E

SWITCHING BETWEEN PAIRED PHONES

On the radio: 1. Push the SETUP button. 2. Select Bluetooth. 3. Select Bluetooth Connection . 4. Select Connect next to the desired phone.

CONNECTING YOUR PHONE On the radio: 1. Push the SETUP button. 2. Select Bluetooth. 3. Select Bluetooth Connection . 4. Select Add New. In your phones Bluetooth settings: 5. Select the on your phone. 6. Enter the passkey from the radio or accept the authorization pop-up on your phone.

For more information, visit HyundaiBluetooth.com

Using Voice Command: Change Bluetooth device

REVIEW QUICK REFERENCE GUIDE

PAIR CUSTOMER'S PHONE TO THE BLUETOOTH SYSTEM (if equipped) - page 21

OPERATION OF THE NAVIGATION SYSTEM (if equipped) - page 28

REVIEW AND TEAR OFF VOICE COMMAND / QUICK TIP CARD

OPERATION OF THE AUDIO SYSTEM

BLUETOOTH page 22 - Demonstrate phone pairing

Refer to https://w

Manualsnet FAQs

If you want to find out how the Veloster Hyundai works, you can view and download the Hyundai Veloster 2.0 2020 Hatchback Quick Reference Guide on the Manualsnet website.

Yes, we have the Quick Reference Guide for Hyundai Veloster as well as other Hyundai manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Quick Reference Guide should include all the details that are needed to use a Hyundai Veloster. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Hyundai Veloster 2.0 2020 Hatchback Quick Reference Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Hyundai Veloster 2.0 2020 Hatchback Quick Reference Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Hyundai Veloster 2.0 2020 Hatchback Quick Reference Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Hyundai Veloster 2.0 2020 Hatchback Quick Reference Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Hyundai Veloster 2.0 2020 Hatchback Quick Reference Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.