Hikvision NK44W0H(D) Wi-fi Kit Quick Start Guide PDF

0

Wi-Fi Kit

Quick Start Guide

Wi-Fi KitQuick Start Guide

1

Quick Start Guide

2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights

reserved.

This Manual is the property of Hangzhou Hikvision Digital Technology

Co., Ltd. or its affiliates (hereinafter referred to as "Hikvision"), and it

cannot be reproduced, changed, translated, or distributed, partially

or wholly, by any means, without the prior written permission of

Hikvision. Unless otherwise expressly stated herein, Hikvision does

not make any warranties, guarantees or representations, express or

implied, regarding to the Manual, any information contained herein.

About this Manual

The Manual includes instructions for using and managing the

Product. Pictures, charts, images and all other information

hereinafter are for description and explanation only. The information

contained in the Manual is subject to change, without notice, due to

firmware updates or other reasons. Please find the latest version of

this Manual at the Hikvision website (http://www.hikvision.com/).

Please use this Manual with the guidance and assistance of

professionals trained in supporting the Product.

Trademarks Acknowledgement

and other Hikvision's trademarks and logos are

the properties of Hikvision in various jurisdictions.

Other trademarks and logos mentioned are the properties of

their respective owners.

LEGAL DISCLAIMER

Wi-Fi KitQuick Start Guide

2

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS

MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE,

SOFTWARE AND FIRMWARE, ARE PROVIDED AS IS AND WITH ALL

FAULTS AND ERRORS. HIKVISION MAKES NO WARRANTIES, EXPRESS

OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY,

SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE.

THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO

EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL,

CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING,

AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS,

BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF

SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON

BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT

LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE

PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY

OF SUCH DAMAGES OR LOSS.

YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR

INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY

RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR

OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK,

VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER,

HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.

YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL

APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR

ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.

ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A

MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD

PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY,

Wi-Fi KitQuick Start Guide

3

INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER

PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY

PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR

PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE

DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL

WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY

NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN

SUPPORT OF HUMAN RIGHTS ABUSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE

APPLICABLE LAW, THE LATER PREVAILS.

Regulatory Information

FCC Information

Please take attention that changes or modification not expressly

approved by the party responsible for compliance could void the

user's authority to operate the equipment.

FCC compliance: This equipment has been tested and found to

comply with the limits for a Class B digital device, pursuant to part 15

of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is

Wi-Fi KitQuick Start Guide

4

encouraged to try to correct the interference by one or more of the

following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

This equipment should be installed and operated with a minimum

distance 20cm between the radiator and your body.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is

subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including

interference that may cause undesired operation

EU Conformity Statement

This product and - if applicable - the supplied

accessories too are marked with "CE" and comply

therefore with the applicable harmonized European

standards listed under the EMC Directive 2014/30/EU, the RoHS

Directive 2011/65/EU and the RE Directive 2014/53/EU.

2012/19/EU (WEEE directive): Products marked with

this symbol cannot be disposed of as unsorted

municipal waste in the European Union. For proper

recycling, return this product to your local supplier

upon the purchase of equivalent new equipment, or dispose of it at

Wi-Fi KitQuick Start Guide

5

designated collection points. For more information, see:

www.recyclethis.info.

2006/66/EC (battery directive): This product contains

a battery that cannot be disposed of as unsorted

municipal waste in the European Union. See the

product documentation for specific battery

information. The battery is marked with this symbol,

which may include lettering to indicate cadmium (Cd), lead (Pb), or

mercury (Hg). For proper recycling, return the battery to your supplier

or to a designated collection point. For more information, see:

www.recyclethis.info.

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-3 (B)/NMB-3(B) standards

requirements.

This device complies with Industry Canada license-exempt RSS

standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference

that may cause undesired operation of the device.

Le prsent appareil est conforme aux CNR d'Industrie Canada

applicables aux appareils radioexempts de licence. L'exploitation est

autorise aux deux conditions suivantes :

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage

radiolectrique subi, mme si le brouillage est susceptible d'en

compromettre le fonctionnement.

Wi-Fi KitQuick Start Guide

6

Under Industry Canada regulations, this radio transmitter may only

operate using an antenna of a type and maximum (or lesser) gain

approved for the transmitter by Industry Canada. To reduce potential

radio interference to other users, the antenna type and its gain

should be so chosen that the equivalent isotropically radiated power

(e.i.r.p.) is not more than that necessary for successful

communication.

Conformment la rglementation d'Industrie Canada, le prsent

metteur radio peut

fonctionner avec une antenne d'un type et d'un gain maximal (ou

infrieur) approuv pour l'metteur par Industrie Canada. Dans le but

de rduire les risques de brouillage radiolectrique l'intention des

autres utilisateurs, il faut choisir le type d'antenne et son gain de

sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne

dpasse pas l'intensit ncessaire l'tablissement d'une

communication satisfaisante.

This equipment should be installed and operated with a minimum

distance 20cm between the radiator and your body.

Cet quipement doit tre install et utilis une distance minimale

de 20 cm entre le radiateur et votre corps.

Safety Instruction

These instructions are intended to ensure that user can use the

product correctly to avoid danger or property loss.

The precaution measure is divided into "Warnings" and "Cautions"

Warnings: Serious injury or death may occur if any of the warnings

are neglected.

Wi-Fi KitQuick Start Guide

7

Cautions: Injury or equipment damage may occur if any of the

cautions are neglected.

Warnings For Network Camera:

Proper configuration of all passwords and other security settings

is the responsibility of the installer and/or end-user.

In the use of the product, you must be in strict compliance with

the electrical safety regulations of the nation and region. Please

refer to technical specifications for detailed information.

The power source should meet limited power source or PS2

requirements according to IEC 60950-1 or IEC 62368-1 standard.

Do not connect several devices to one power adapter as adapter

overload may cause over-heating or a fire hazard.

Please make sure that the plug is firmly connected to the power

socket. When the product is mounted on wall or ceiling, the

device shall be firmly fixed.

Warnings Cautions

Warnings Follow these

safeguards to prevent

serious injury or death.

Cautions Follow these

precautions to prevent

potential injury or material

damage.

Wi-Fi KitQuick Start Guide

8

If smoke, odor or noise rise from the device, turn off the power

at once and unplug the power cable, and then please contact

the service center.

For NVR Device:

Proper configuration of all passwords and other security settings

is the responsibility of the installer and/or end-user.

In the use of the product, you must be in strict compliance with

the electrical safety regulations of the nation and region. Please

refer to technical specifications for detailed information.

The power source should meet limited power source or PS2

requirements according to IEC 60950-1 or IEC 62368-1 standard.

Do not connect several devices to one power adapter as adapter

overload may cause over-heating or a fire hazard.

Please make sure that the plug is firmly connected to the power

socket.

If smoke, odor or noise rise from the device, turn off the power

at once and unplug the power cable, and then please contact

the service center.

If the PoE ports of device do not comply with Limited Power

Source, the additional equipment connected to PoE ports shall

have fire enclosure.

The USB interface of the /P devices can be connected with the

mouse and U-flash disk storage device only.

Cautions

Wi-Fi KitQuick Start Guide

9

For Network Camera:

CAUTION: Hot parts! Burned fingers when handling the parts.

Wait one-half hour after switching off

before handling parts. This sticker is to

indicate that the marked item can be hot

and should not be touched without taking care. For device with

this sticker, this device is intended for installation in a restricted

access location, access can only be gained by service persons or

by users who have been instructed about the reasons for the

restrictions applied to the location and about any precautions

that shall be taken.

Make sure the power supply voltage is correct before using the

camera.

Do not drop the camera or subject it to physical shock.

Do not touch sensor modules with fingers. If cleaning is

necessary, use clean cloth with a bit of ethanol and wipe it

gently. If the camera will not be used for an extended period,

please replace the lens cap to protect the sensor from dirt.

Do not aim the camera at the sun or extra bright places.

Blooming or smearing may occur otherwise (which is not a

malfunction), and affect the endurance of sensor at the same

time.

The sensor may be burned out by a laser beam, so when any

laser equipment is in using, make sure that the surface of sensor

will not be exposed to the laser beam.

The operating temperature shall be -30C to +60C (-22 F to

+140 F). Do not place the camera in extremely hot, cold, dusty

Wi-Fi KitQuick Start Guide

10

or damp locations, and do not expose it to high electromagnetic

radiation.

To avoid heat accumulation, good ventilation is required for

operating environment.

Keep the camera away from liquid while in use.

While in delivery, the camera shall be packed in its original

packing, or packing of the same texture.

Regular part replacement: a few parts (e.g. electrolytic

capacitor) of the equipment shall be replaced regularly

according to their average enduring time. The average time

varies because of differences between operating environment

and using history, so regular checking is recommended for all the

users. Please contact with your dealer for more details.

This equipment is not suitable for use in locations where

children are likely to be present.

CAUTION: Risk of explosion if the battery is replaced by an

incorrect type. Dispose of used batteries according to the

instructions

ATTENTION: IL Y A RISQUE D'EXPLOSION SI LA BATTERIE EST

REMPLACE PAR UNE BATTERIE DE TYPE INCORRECT. METTRE

AU REBUT LES BATTERIES USAGES CONFORMMENT AUX

INSTRUCTIONS

Improper replacement of the battery with an incorrect type may

defeat a safeguard (for example, in the case of some lithium

battery types).

Wi-Fi KitQuick Start Guide

11

Do not dispose of the battery into fire or a hot oven, or

mechanically crush or cut the battery, which may result in an

explosion.

Do not leave the battery in an extremely high temperature

surrounding environment, which may result in an explosion or

the leakage of flammable liquid or gas.

Do not subject the battery to extremely low air pressure, which

may result in an explosion or the leakage of flammable liquid or

gas.

If the product does not work properly, please contact your

dealer or the nearest service center. Never attempt to

disassemble the camera yourself. (We shall not assume any

responsibility for problems caused by unauthorized repair or

maintenance.)

For NVR Device:

Before connecting and operating your device, please be advised of

the following tips:

Ensure unit is installed in a well-ventilated, dust-free

environment.

Unit is designed for indoor use only.

Keep all liquids away from the device.

Ensure environmental conditions meet factory specifications.

Ensure unit is properly secured to a rack or shelf. Major shocks

or jolts to the unit as a result of dropping it may cause damage

to the sensitive electronics within the unit.

Use the device in conjunction with an UPS if possible.

Wi-Fi KitQuick Start Guide

12

Power down the unit before connecting and disconnecting

accessories and peripherals.

A factory recommended HDD should be used for this device.

Improper use or replacement of the battery may result in hazard

of explosion. Replace with the same or equivalent type only.

Dispose of used batteries according to the instructions provided

by the battery manufacturer.

Lutilisation ou le remplacement inadquats de la pile peuvent

entraner un risque dexplosion. Remplacez-la par le mme type

ou lquivalent du mme type seulement. Jetez les piles usages

conformment aux directives fournies par le fabricant de la pile.

Power Supply Instructions for NVR Device:

Use only power supplies listed in the user instructions.

Standard Power Supply

Models

Manufacturer

European

MSA-C2000IC12.0-

24P-DE

MOSO POWER SUPPLY

TECHNOLOGY CO.,LTD

ADS-26FSG-12

12024EPG

SHENZHEN HONOR

ELECTRONIC CO.,LTD

British MSA-C2000IC12.0-

24P-GB

MOSO POWER SUPPLY

TECHNOLOGY CO.,LTD

ADS-26FSG-12

12024EPB

SHENZHEN HONOR

ELECTRONIC CO.,LTD

Wi-Fi KitQuick Start Guide

13

Table of Contents 1 Introduction ............................................................................. 14

1.1 Application ......................................................................... 14 1.2 NVR Appearance ................................................................ 15

1.2.1 Front Panel.............................................................. 15 1.2.2 Rear Panel ............................................................... 16

1.3 Camera Appearance .......................................................... 17 2 NVR Installation ........................................................................ 19

2.1 Precautions ........................................................................ 19 2.2 Hard Disk Drive Installation............................................... 19

3 Camera Installation ................................................................... 22 3.1 Ceiling Mounting ............................................................... 22

Mounting with a Junction Box .......................................... 24 Waterproof Measures ....................................................... 27

3.3.1 Install Network Cable Waterproof Jacket ............. 27 3.3.2 Waterproof Other Cables ...................................... 28

4 Menu Operation ....................................................................... 29 4.1 Startup and Shutdown ...................................................... 29 4.2 Activate Your NVR .............................................................. 29 4.3 Use the Setup Wizard ........................................................ 30 4.4 Add IP Cameras .................................................................. 31

4.4.1 Wi-Fi Kit Cameras ................................................... 31 4.4.2 Other Cameras ....................................................... 33

4.5 Hik-Connect Setup ............................................................. 34

Wi-Fi KitQuick Start Guide

14

1 Introduction

1.1 Application

The Wi-Fi kit includes four network cameras and a NVR device. The

NVR works as a wireless network router, and the camera connects to

the NVR's Wi-Fi automatically after the camera is powered on.

VGA/HDMI

Wi-Fi Camera

NVR

Monitor

Note:

If you want to access the NVR via Internet, connect your NVR

with the router.

Wi-Fi KitQuick Start Guide

15

1.2 NVR Appearance

1.2.1 Front Panel

Front Panel

Description

No. Icon Description

1 Indicator turns red when NVR is

powered up.

2 Indicator lights in red when there is

data transmission.

3 Indicator blinks blue when network

connection is functioning properly.

Wi-Fi KitQuick Start Guide

16

1.2.2 Rear Panel

Rear Panel

Description

No. Icon Description

1 Wi-Fi Antenna Wi-Fi antenna interface.

2 Power supply 12 VDC power supply.

3 Audio out One audio output.

4 VGA VGA interface

5 HDMI HDMI video output

connector.

6 USB Two USB 2.0 interface.

7 LAN One RJ-45 10M/100M self-

adaptive Ethernet interface

Wi-Fi KitQuick Start Guide

17

No. Icon Description

8 Ground Ground (needs to be

connected when device

starts up).

1.3 Camera Appearance

1 2 3 4

5

7

8

9

6

12

13

14

10

11

Overview

Description

No. Description

1 Bracket

2 Back Cover

3 Main Body

4 Front Cover

5 IR LED Cover

Wi-Fi KitQuick Start Guide

18

No. Description

6 Status Indicator

7 Lens

8 Microphone

9 IR LED

10 Power Interface

11 Network

Interface

12 RESET Button

13 Memory Card

Slot

14 Antenna

Note:

Hold RESET about 10s when the camera is powering on or rebooting

to restore the default settings, including the user name, password, IP

address, port No., etc.

Wi-Fi KitQuick Start Guide

19

2 NVR Installation

2.1 Precautions

During installation of the NVR:

Use brackets for rack mounting.

Ensure ample room for audio and video cables.

When routing cables, ensure that the bend radius of the cables

is no less than five times than its diameter.

Connect the alarm cable.

Allow at least 2 cm (0.75-inch) of space between racks

mounted devices.

Ensure the NVR is grounded.

Environmental temperature should be within the range of -10 C

to +55 C, +14 F to +131 F.

Environmental humidity should be within the range of 10% to

90%.

2.2 Hard Disk Drive Installation

Before you start:

If the NVR has been installed with hard disks, skip this section.

Disconnect the power from the NVR before installing a hard disk

drive (HDD). A factory recommended HDD should be used for

this installation.

Tools Required: Screwdriver.

Wi-Fi KitQuick Start Guide

20

Steps:

1. Remove the cover from device by unfastening the screws on

panels.

Remove Cover

2. Connect the data cable and power cable.

a) Connect one end of data cable to the device motherboard.

b) Connect the other end of data cable to HDD.

c) Connect one end of power cable to HDD.

d) Connect the other end of power cable to the device motherboard.

Wi-Fi KitQuick Start Guide

21

Connect Cables

3. Set the device up, match HDD screw threads with the reserved

holes on the device bottom, and fix HDD with screws.

Fix HDD to Device Bottom

4. (Optional) Repeat the steps above to install other HDDs.

5. Reinstall the device cover and fasten screws.

Wi-Fi KitQuick Start Guide

22

3 Camera Installation

Before you start:

Make sure the device in the package is in good condition and all

the assembly parts are included.

The standard power supply is 12 VDC. Make sure your power

supply matches with your camera.

Make sure all the related equipment is power-off during the

installation.

Check the specification of the products for the installation

environment.

Make sure that the wall is strong enough to withstand four times

the weight of the camera and the bracket.

For the camera that supports IR, you are required to pay attention to

the following precaution to prevent IR reflection:

Make sure that there is no reflective surface too close to the

camera lens. The IR light from the camera may reflect back into

the lens causing reflection.

3.1 Ceiling Mounting

Before you start:

The camera supports wall mounting and ceiling mounting and the

installation steps are similar. Here we take ceiling mounting as an

example.

Steps:

Wi-Fi KitQuick Start Guide

23

1. Paste the drill template on the wall or ceiling and drill holes

according to the marked holes on the drill template.

Ceiling Mounting

Hole

Hole

Hole

55 (2.2")

3- 4.5 (0.2")

Unit: mm (inch)

Paste the Drill Template

2. If you need to route cables through the wall or ceiling, drill a cable

hole according to the drill template. Skip this step if you want to

route the cables on the surface of the wall or ceiling.

3. Route the cables of the camera.

4. Install the camera to the wall or ceiling with screws.

Drill Template Drill Template

Install the Camera

Note:

Wi-Fi KitQuick Start Guide

24

In the supplied screw package, both self-tapping screws, and

expansion bolts are contained.

If the ceiling is cement, expansion bolts are required to fix the

camera. If the ceiling is wooden, self-tapping screws are required.

5. Adjust the view angle of the camera.

3-axis (pan/tilt/rotation) adjusting allows adjustment for optimum

camera rotation and placement.

1). Loosen the 3-axis adjusting nut.

2). Adjust the panning, tilting and rotation position of the camera.

The adjusting range of the panning is from 0 to 360, range of

the tilting is from 0 to 90 and range of the rotation is 0 to

360.

3). Tighten the adjusting nut.

0 to 360

0 to 360

0 to 90

View Angle Adjustment

Mounting with a Junction Box

Before you start:

Both wall mounting and ceiling mounting are suitable for the bullet

camera. Wall mounting will be taken as an example in this section.

Wi-Fi KitQuick Start Guide

25

And you can take steps of wall mounting as a reference for ceiling

mounting.

You need to purchase a junction box first.

Steps:

1. Paste the drill template (supplied) to the desired mounting position

on the wall.

2. Drill the screw holes and the cable hole (optional) in the wall

according to the drill template.

Note:

Drill the cable hole, if adopting ceiling outlet to route the cable.

Figure 3-4 The Drill Template

3. Take apart the junction box, and align the screw holes of the bullet

camera with those on the junction box's cover.

4. Fix the camera on the junction box's cover with screws.

Junction Box Cover

Figure 3-5 Fix the Camera on Junction Box's Cover

Wi-Fi KitQuick Start Guide

26

5. Secure the junction box's body with three supplied screws on the

wall.

Figure 3-6 Fix the Junction Box on the Wall

6. Route the cables through the cable hole.

7. Combine the junction box cover with its body with three screws on

the junction box's cover.

Figure 3-7 Combine Junction Box's Cover with its Body

8. Repeat steps 5 of 3.1 Ceiling Mounting to complete the installation.

Wi-Fi KitQuick Start Guide

27

Waterproof Measures

If the camera is installed outdoor, you should use the waterproof

accessory or tapes to waterproof the cables. Otherwise, the cables

might get wet or a short circuit occurs.

3.3.1 Install Network Cable Waterproof Jacket

Align

Figure 3-8 Install Waterproof Jacket

Steps:

1. Feed the network cable through and in order.

2. Fix on the network cable between and .

3. Place onto the end of , and plug the RJ45 male connector

into RJ45 female connector.

4. Screw to clockwise.

5. Push into .

6. Secure with the in clockwise direction.

Wi-Fi KitQuick Start Guide

28

3.3.2 Waterproof Other Cables

After routing and connecting the cables, use the waterproof tapes to

wrap up the cables. Connected cables and spare cables both should

be wrapped up as the figures below.

Waterproof Cables

Wi-Fi KitQuick Start Guide

29

4 Menu Operation

4.1 Startup and Shutdown

To start your NVR:

Steps:

1. Check the power supply is plugged into an electrical outlet. It is

HIGHLY recommended that an Uninterruptible Power Supply (UPS)

be used in conjunction with the device. The Power button on the

front panel should be red, indicating the device is receiving the

power.

2. Press the power switch on the panel. The Power LED should turn

blue. The unit will begin to start.

After the device starts up, the wizard will guide you through the initial

settings, including modifying password, date and time settings,

network settings, HDD initializing, and recording.

To shut down the NVR:

Steps:

1. Enter the Shutdown menu. Go to Menu > Shutdown.

2. Select Shutdown.

3. Click Yes.

4.2 Activate Your NVR

Purpose:

Wi-Fi KitQuick Start Guide

30

For the first-time access, you need to activate the NVR by setting an

admin password. No operation is allowed before activation. You can

also activate the NVR via Web Browser, SADP or client software.

1. Input the same password in the text field of Create New Password

and Confirm New Password.

STRONG PASSWORD RECOMMENDED We highly

recommend you create a strong password of your own

choosing (using a minimum of 8 characters, including

upper case letters, lower case letters, numbers, and

special characters) in order to increase the security of

your product. And we recommend you reset your

password regularly, especially in the high security

system, resetting the password monthly or weekly can

better protect your product.

2. Enter IP Camera Activation Password to set the IP camera

activation password.

3. Select Area/Country.

4. Click OK.

4.3 Use the Setup Wizard

The Setup Wizard can guide you to configure the system resolution,

system date/time, HDD initialization, IP camera management, etc.

Wi-Fi KitQuick Start Guide

31

4.4 Add IP Cameras

4.4.1 Wi-Fi Kit Cameras

The supplied Wi-Fi kit cameras can connect to the NVR automatically

after it is powered on.

Steps:

1. Connect the NVR to a display.

2. Connect camera 01, 02, 03, and 04 to NVR. The cameras connects

to NVRs Wi-Fi automatically.

Note:

Make sure the distance between Camera 01, 02, 03, 04 and the

NVR is no more than 15 m.

Camera 01 xxx.xxx.xxx.xxx

Camera 02 xxx.xxx.xxx.xxx

Camera 03 xxx.xxx.xxx.xxx

Camera 04 xxx.xxx.xxx.xxx

LAN

WLAN

Connect to the NVR

Wi-Fi KitQuick Start Guide

32

(Optional) If you want to install a camera in a long distance, you can

enable the repeater function on NVR. Here we take Camera 04 as an

example.

Steps:

1. Right click the screen and select Menu > Camera.

2. Click Enable Repeater and the repeater function of NVR and

cameras is enabled.

Note:

Make sure the distance between Camera 01, 02, 03, 04 and the

NVR is no more than 15 m.

3. Install Camera 04 to the desired position and power it on. Then it

connects to the NVR via the repeater function.

Note:

The farthest installation distance for Camera 04 depends on the

actual environment.

Wi-Fi KitQuick Start Guide

33

Camera 01 xxx.xxx.xxx.xxx

Camera 02 xxx.xxx.xxx.xxx

Camera 03 xxx.xxx.xxx.xxx

Camera 04 xxx.xxx.xxx.xxx

LAN

WLAN

Connect Cameras to NVR via Repeater Function

4.4.2 Other Cameras

For the cameras not included in the kit, choose one of the following

methods to add the cameras.

Auto Connection:

Steps:

1. Power the camera up and hold the RESET button for 10 seconds to

restore the camera to defaults.

Note:

Make sure the camera is not activated before the installation.

2. Right click the screen and select Wi-Fi Match. The camera connects

to the NVR within 120 s.

Wi-Fi KitQuick Start Guide

34

Manual Connection:

Steps:

1. Click to select an idle window in the live view mode.

2. Click in the center of the window.

3. Select the detected IP camera and click Add to add it directly.

4. Go to Menu > Configuration > Wi-Fi.

5. Set wireless network parameters, including Network Bridging, SSID,

Security Mode, and Key.

6. Access the Web of the camera.

7. Go to Configuration > Network > Advanced Settings > Wi-Fi to set

the Wi-Fi parameters.

Note:

For the detailed information, see the User Manual of the Network

Camera.

4.5 Hik-Connect Setup

The Hik-Connect mobile client can generally manage various kinds of

devices. With the client, you can remotely control NVRs, DVRs, and

network cameras, etc.

Steps:

1. Get and install Hik-Connect application by the following ways.

Visit https://appstore.hikvision.com to download the application

according to your mobile phone system.

Visit the official site of our company. Then go to Support > Tools >

Hikvision App Store.

Scan the QR code below to download the application.

Wi-Fi KitQuick Start Guide

35

Note:

If errors like Unknown app occur during the installation, solve the

problem in two ways.

Visit https://appstore.hikvision.com/static/help/index.html to

refer to the troubleshooting.

Visit https://appstore.hikvision.com/, and click Installation Help at

the upper right corner of the interface to refer to the

troubleshooting.

2. Launch the app and register for a Hik-Connect user account.

3. Log in Hik-Connect app after registration.

4. Use a network cable to connect the NVR with a router.

5. In the Hik-Connect app, tap "+" on the upper-right corner and then

scan the QR code of the NVR to add the NVR.

6. After the adding, you can get the live view, and play back the

videos in the app.

Note:

For detailed information, refer to the user manual of the Hik-

Connect app.

0

UD20266B