Hikvision DS-K3H4421-120 Turnstile User's Manual PDF

0

Full high turnstile Quick Start Guide

Manual Name Manual Type

1

Legal Information

2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.

This Manual is the property of Hangzhou Hikvision Digital Technology Co., Ltd. or its affiliates (hereinafter referred to as "Hikvision"), and it cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior written permission of Hikvision. Unless otherwise expressly stated herein, Hikvision does not make any warranties, guarantees or representations, express or implied, regarding to the Manual, any information contained herein.

About this Manual The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version of this Manual at the Hikvision website (https://www.hikvision.com/). Please use this Manual with the guidance and assistance of professionals trained in supporting the Product.

Trademarks Acknowledgement and other Hikvisions trademarks and logos are the properties of Hikvision in various jurisdictions. Other trademarks and logos mentioned are the properties of their respective owners.

LEGAL DISCLAIMER TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED AS IS AND WITH ALL FAULTS AND ERRORS. HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS. YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS.

Manual Name Manual Type

1

2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.

This Manual is the property of Hangzhou Hikvision Digital Technology Co., Ltd. or its affiliates (hereinafter referred to as "Hikvision"), and it cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior written permission of Hikvision. Unless otherwise expressly stated herein, Hikvision does not make any warranties, guarantees or representations, express or implied, regarding to the Manual, any information contained herein.

About this Manual The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version of this Manual at the Hikvision website (https://www.hikvision.com/). Please use this Manual with the guidance and assistance of professionals trained in supporting the Product.

Trademarks Acknowledgement and other Hikvisions trademarks and logos are the properties of Hikvision in various jurisdictions. Other trademarks and logos mentioned are the properties of their respective owners. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks

or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

LEGAL DISCLAIMER TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED AS IS AND WITH ALL FAULTS AND ERRORS. HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS. YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS.

Manual Name Manual Type

1

2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.

This Manual is the property of Hangzhou Hikvision Digital Technology Co., Ltd. or its affiliates (hereinafter referred to as "Hikvision"), and it cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior written permission of Hikvision. Unless otherwise expressly stated herein, Hikvision does not make any warranties, guarantees or representations, express or implied, regarding to the Manual, any information contained herein.

About this Manual The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version of this Manual at the Hikvision website (https://www.hikvision.com/). Please use this Manual with the guidance and assistance of professionals trained in supporting the Product.

Trademarks Acknowledgement and other Hikvisions trademarks and logos are the properties of Hikvision in various jurisdictions. Other trademarks and logos mentioned are the properties of their respective owners.

LEGAL DISCLAIMER TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED AS IS AND WITH ALL FAULTS AND ERRORS. HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS. YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS.

Full high turnstile User Manual

2

Data Protection During the use of device, personal data will be collected, stored and processed. To protect data, the development of Hikvision devices incorporates privacy by design principles. For example, for device with facial recognition features, biometrics data is stored in your device with encryption method; for fingerprint device, only fingerprint template will be saved, which is impossible to reconstruct a fingerprint image. As data controller, you are advised to collect, store, process and transfer data in accordance with the applicable data protection laws and regulations, including without limitation, conducting security controls to safeguard personal data, such as, implementing reasonable administrative and physical security controls, conduct periodic reviews and assessments of the effectiveness of your security controls.

0

2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.

This Manual is the property of Hangzhou Hikvision Digital Technology Co., Ltd. or its affiliates (hereinafter referred to as "Hikvision"), and it cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior written permission of Hikvision. Unless otherwise expressly stated herein, Hikvision does not make any warranties, guarantees or representations, express or implied, regarding to the Manual, any information contained herein.

About this Manual The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version of this Manual at the Hikvision website (https://www.hikvision.com/). Please use this Manual with the guidance and assistance of professionals trained in supporting the Product.

Trademarks Acknowledgement and other Hikvisions trademarks and logos are the properties of Hikvision in various jurisdictions. Other trademarks and logos mentioned are the properties of their respective owners. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks

or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

LEGAL DISCLAIMER TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED AS IS AND WITH ALL FAULTS AND ERRORS. HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS. YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS.

Full high turnstile User Manual

1

Data Protection During the use of device, personal data will be collected, stored and processed. To protect data, the development of Hikvision devices incorporates privacy by design principles. For example, for device with facial recognition features, biometrics data is stored in your device with encryption method; for fingerprint device, only fingerprint template will be saved, which is impossible to reconstruct a fingerprint image. As data controller, you are advised to collect, store, process and transfer data in accordance with the applicable data protection laws and regulations, including without limitation, conducting security controls to safeguard personal data, such as, implementing reasonable administrative and physical security controls, conduct periodic reviews and assessments of the effectiveness of your security controls.

Full high turnstile User Manual

2

Regulatory Information

FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. FCC Conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. EU Conformity Statement

This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the

EMC Directive 2014/30/EU, the LVD Directive 2014/35/EU, the RoHS Directive 2011/65/EU. 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or

dispose of it at designated collection points. For more information see: www.recyclethis.info 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may

include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see: www.recyclethis.info Industry Canada ICES-003 Compliance This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.

Full high turnstile User Manual

3

Applicable Models

This manual is applicable to the models listed in the following table.

Series Model

DS-K3H44XX

DS-K3H4420-120

DS-K3H4410-120

DS-K3H4421-120

DS-K3H4411-120

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Safety Instructions

Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user.

In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation and region. Please refer to technical specifications for detailed information.

Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power Source with 100 to 240 VAC or 12 VDC according to the IEC60950-1 standard. Please refer to technical specifications for detailed information.

Do not connect several devices to one power adapter as adapter overload may cause over-heating or a fire hazard.

Please make sure that the plug is firmly connected to the power socket. If smoke, odor or noise rise from the device, turn off the power at once and unplug the power

cable, and then please contact the service center.

Symbol Description

Provides additional information to emphasize or supplement important points of the main text.

Indicates a potentially hazardous situation, which if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results.

Indicates a hazard with a high level of risk, which if not avoided, will result in death or serious injury.

Full high turnstile User Manual

4

CONTENTS Chapter 1 Product introduction.......................................................................................................... 5

1.1 Brief introduction..................................................................................................................... 5 1.2 Product structure and principle............................................................................................... 5 1.3 Function Features....................................................................................................................7 1.4 Technical parameter.................................................................................................................7

Chapter 2 Equipment Installations......................................................................................................8 2.1 Installation notes......................................................................................................................8 2.2 Equipment Installation............................................................................................................. 8 2.3 Connection............................................................................................................................. 10 2.4 Debugging instruction............................................................................................................ 10 2.5 Notice of use...........................................................................................................................11

Chapter 3 Board and parameter instruction.....................................................................................12 3.1 Board instruction....................................................................................................................12 3.2 Wiring diagram.......................................................................................................................13 3.3 DIP switch instructions...........................................................................................................13

Chapter 4 Trouble shooting and maintenance................................................................................. 15 4.1 Trouble shooting.....................................................................................................................15 4.2 Maintenance...........................................................................................................................16

Full high turnstile User Manual

5

Chapter 1 Product introduction

1.1 Brief introduction

Full high turnstile is a kind of access control equipment designed for places with high class

security requirements. It is easy to combine IC access control, ID access control, code reader,

fingerprint, face recognition and other identification devicesIt realizes the intelligent and efficient

management of passage.. The turnstile is the best choice for access control of modern building.

Full high series are fully applicable to a high traffic flow places like school, factory, park, housing

estate and other places.

1.2 Product structure and principle

The structure of the product is mainly composed of mechanical system and electric control

system.

The mechanical system is composed of upper box, side column, guardrail, rotation shaft,

pedestal bearing, core.

120 degree full high turnstile

The electric control system consists of access control device (Order separately), control board,

1.Side column 2.Upper box 3.Pedestal bearing 4.Rotation shaft

Full high turnstile User Manual

6

direction indicator, position sensor, solenoid, damper,power supply.

NO Name Function

1 Access control

device

IC/ID card access control, fingerprint, face recognition, code

reader, access control device send relay signal to the turnstile

board door signal.

2 Control board

The control center of the system, when receiving the access

control device delay signal, it control solenoid open ,the

direction indicator light turns green, The rod of rotation can

be pushed to 90 degree or 120 degree ,the solenoid will lock

immediately when receiving closing signal from core position

sensor.

3 Indicator Display the current channel status

4 Position sensor Detects and controls the opening and closing position of the

gate

5 solenoid Locking shaft

7 Damper Makes the shaft run smoothly

8 Power Supply power supply to control board

System Operation Principle

1) Turn on the power, 2 seconds later; the system enters into work mode; the rod cant be turn.

2) After swipe legal card or code and fingerprint, Access control device send opening signal to

control board.

3) The control board receives open signal, control indicator to green, solenoid open , The rod of

rotation can be pushed to 90 degree or 120 degree.

4) After the passenger push rod and then rotation turn to 90 or 120 degree , the position sensor

send close signal to control board, the solenoid lock immediately

5) Full turnstiles will lock after 5 seconds if the passenger swipe card but do not pass.

Full high turnstile User Manual

7

1.3 Function Features

Damper buffer device

Standard signal input port, can be connected with most of the access control board,

fingerprint device and scanner other equipment;

The turnstile has automatic reset function, if people swipe the authorized card, but dont pass

through within the settled time, it need to swipe card again for entry;

Card-reading Recording function

Automatic opening after emergency fire signal input

Anti following : prevent illegal passing

High light LED indicator , displaying passing status

Normal open can be also controlled via external button or manual key unlock

Gate will automatically open when power failure

1.4 Technical parameter

Basic Parameters

1 Input voltage AC 220V 50HZ

2 Work voltage DC 24V /50W

3 Housing Material 304 Stainless Steel

4 Arm rotation angle 90/120 degree

5 LaneWidth 650mm

6 Opening response time 0.2s

7 Open Signal Passive signals (relay signals, dry

contact signals,)

8 Communication RS485

9 Pass rate 25-30 person/min

Full high turnstile User Manual

8

10 Fire /Emergency Alarm/ Gate open, free for passing

11 Working Temperature -20~+70

12 Working environment Indoor and outdoor

Chapter 2 Equipment Installations

2.1 Installation notes

Please read this manual carefully before install it;

As for the convenience of installation and maintenance, installation space height of at least

2.6 meters;

Make sure the whole is horizontal and the shaft is vertical;

Protective earth wire must be connected;

Please check all wires has been properly connected before power on;

Please test all function before using;

2.2 Equipment Installation

1) Tool preparations

1 A set of hexagon spanner 5 Screw driver and other common wiring

tool

2 Cross screwdriver 6mm 6 Millimeter

3 Open spanner 17-19mm 7 M12x100 Expansion screws 8pcs

4 Impact drill(including D16 and

D14 drills) 8 Cable Tester

2) Ensure the installation location and the system composition ,prepare to install after carrying out

the system planning;

3) Make well of installation of equipment foundation base.

Full high turnstile User Manual

9

4)Assemble the machine, refer to the picture.

Assemble both sides of guardrail 1 part and 2 part firstly.Then place the 3 part top upper box over

the 1part and 2 part and tighten the mounting screws;lay 4 part bearing mechanism at the bottom

of a rotating shaft;Install 5 part rotation, tighten the top mounting screws;Check the verticality of

the shaft.Adjust and check the level and vertical of the machine.

5) Mark the fixing position of expansion bolts according to fixing plate on the bottom of each

turnstile.

6) Drill hole by impact drill, fix Expansion screws.

7) Tighten the expansion screw after the functional test is completed

8)The card reader is installed on the column.

Full high turnstile User Manual

10

2.3 Connection

1) Connect wire of indicator

Indicator port is placed above the guardrail and inserted into the VCC D1 D2 GND port of the

control board.

2) Connect wire of access control device

3) Connecting AC220V power input

2.4 Debugging instruction

1) Check wireCheck whether the connection wire of the gate and the power line are properly

Full high turnstile User Manual

11

connected before power on.

2) Function test

Access control relay time should be set to 0 seconds or 1 second

Rod can not push without swipe valid card

Indicator will show green and the rod of rotation can be pushed to 90 degree or 120 degree

when swipe valid card.

If passager not go through ,turnstile will lock after 5 seconds

2.5 Notice of use

If it tests well before installation, then fixed it; before you install and maintain it, please cut off

the power;

The product must be earthed, and an earth leakage breaker is necessary on the power supply;

Follow the order and pass one by one

Please keep the control button or remote control far away from the children;

Please dont use the turnstile under the thunder and lightning condition to get rid of damage to

the equipment.

Full high turnstile User Manual

12

Chapter 3 Board and parameter instruction

3.1 Board instruction

No Port Sign Instructions

1 +24V

24V input power supply to PCB board GND

2 Down Test

Drop rod interface

3 SW1 GND

Entry opening signal input, Dry contact signal and Access control PCB board entry opening relay signal (NO connect SW1, COM connect GND, and the relay time of access control board should be set 0 or 1

4 SW2 GND

Exit opening signal input, Dry contact signal and Access control PCB board exit opening relay signal (NO connect SW2, COM connect GND, and the relay time of access control board should be set 0 or 1

6 VCC D1 D2 GND VCCGND+12 V power supply for indicator

D1Entry LED indicator signal input D2Exit LED indicator signal input

7 ELE.NC 12V circular electromagnet port

Full high turnstile User Manual

13

8 GND POS 24V

Position sensor full close in place signal input,once arm turn 120 degree , it will give closing gate signal

10 ELE.1 GND

Output for entry square solenoid, normally 0v t, when board recieve open singal,This port will be 24v output

11 ELE.2 GND

Output for exit square solenoid, normally 0v t, when board recieve open singal,This port will be 24v output

3.2 Wiring diagram

3.3 DIP switch instructions

NO DP

1 2 3 4 5 6 7 8

Full high turnstile User Manual

14

Dial 1-3: traffic duration; Dial 4-8: function mode setting;

Function mode setting Dial code Automatic reset

8 7 6 5 4 3 2 1 Times

4. Restore factory settings: dial code 4 to on before power on,

and dial code 4 to off after power on.

5. Water light - light bar mode: (the default dial off is water

light)Set the light bar mode: dial code 4 and 5 to on before

power on, and dial code 4 to off after power on.

6. Electromagnet working mode: (the default dial on is

normal power supply, switch on and power off)Set the

normal power-off and switch on power supply: dial code 6 to

off before power on, and then power on again.

7. Working mode of induction switch: (default dial on limit

switch)Set the travel switch: turn code 7 to off before power

on, and then power on again.

8. Traffic memory: (the default dial off is not enabled)Set the

access memory: dial code 8 to on before power on, and then

power on again.

0 0 0 5S

0 0 1 6S

0 1 0 7S

0 1 1 8S

1 0 0 9S

1 0 1 10S

1 1 0 11S

1 1 1 12S

with memory function, if swiping valid card 5 times, it can pass five peoples; without memory function, if swiping valid card 5 times, it only can pass one people.

Full high turnstile User Manual

15

Chapter 4 Trouble shooting and maintenance

4.1 Trouble shooting

Q1:When access board send open sigal,armmove reverse and indicator show reverse?

Reasons: open signal reverse connection

Solotion: exchange SW1 GND and SW2 GND terminal of board.

Q2: Indicator is not working?

Reasons: 1. wires loose 2. indicator or board damage

Solution:

1. Check connect wire of indicator

2. Repalce indicator or board.

Q3: How to achieve free for one way ?

1. Remove one of square solenoid

Q4: Arm can not push when swipe card and indicator show green ?

Solution: 1. Check 24V GND output for square solenoid 2. Replace new board or solenoid

Q5: Passing two or three people after swipe card at a time.

Reasons:

1. The Positon sensor didnt be touched by the right screw cap when the turn plate rotating. (Or

didnt receive the effective signal even touched)

2. The square solenoid does not stretch smoothly.

3. Control baord damage

Solution:

1. Move the position senor inward ,Check connect wires to board

2. Adjust square solenoid or replace new one.

Full high turnstile User Manual

16

3. Changing the square solenoid.

4. Replace a new board.

Q6Rod can't turn 90 degrees or 120 degree for one pass

Reasons:

1. The position sensor is too close to the wheel;

2. If the speed go through is too slow and times out.

Solution:

1. Open the cover of to box , adjust position senosr

2. Set DIP switch

Q7It is hard to push the shaft rotation

Reasons: 1. Bottom bearing rust or damage; 2. The shaft is not vertical

Solution: 1. Replace new bearing 2. Adjust the shaft to vertical

4.2 Maintenance

Full high turnstile require regular maintenance by professionals and daily cleaning to ensure

long-term stability and extended equipment life.

1. Maintenance Content:

Keep the turnstile housing and card reader panels of turnstile gates clean;

Fasten and lubricate the internal movement structure;

Check the dust of the driver board and make it cleans.

Check the connectors and wiring points to ensure the reliability of the connection.

Check the bearings at the bottom of the shaft

2 Maintenance Methods:

1. Cleaning: Check the housing and card reader panels of the gate, and remove the dust and other

dirt to make them clean;wipe rust inhibitor to keep stainless steel bright

2. Rust removal and Lubrication: Check the movement of the flap /slide gate and swing gate, remove

Full high turnstile User Manual

17

rust with sand paper and spread with anti-rust oil if corroded;

3. Screws fastening: Check the connection of the various moving parts, fasten the screws where they

are loose to avoid causing fault for long-running;

4.Cleaning the bearings at the bottom of the shaft and add grease.

5. Circuit board cleaning: Cut off the power, and wipe dust of the board by using a clean brush;

6. Lines Checking: Check the connecting lines and solder reinforcement if they are loose off.

Note: This product is the strong professional technical equipment. In addition to daily maintenance,

please do not feel free t