Hikvision DS-K3G411 Turnstile User's Manual PDF
en
Summary of Content for Hikvision DS-K3G411 Turnstile User's Manual PDF
DS-K3G411 Series Tripod Turnstile User Manual
Legal Information
2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
About this Manual The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version of this Manual at the Hikvision website ( https:// www.hikvision.com/ ). Please use this Manual with the guidance and assistance of professionals trained in supporting the Product.
Trademarks
and other Hikvision's trademarks and logos are the properties of Hikvision in various jurisdictions. Other trademarks and logos mentioned are the properties of their respective owners.
Disclaimer TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED AS IS AND WITH ALL FAULTS AND ERRORS. HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS. YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE
DS-K3G411 Series Tripod Turnstile User Manual
i
DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS.
Data Protection During the use of device, personal data will be collected, stored and processed. To protect data, the development of Hikvision devices incorporates privacy by design principles. For example, for device with facial recognition features, biometrics data is stored in your device with encryption method; for fingerprint device, only fingerprint template will be saved, which is impossible to reconstruct a fingerprint image. As data controller, you are advised to collect, store, process and transfer data in accordance with the applicable data protection laws and regulations, including without limitation, conducting security controls to safeguard personal data, such as, implementing reasonable administrative and physical security controls, conduct periodic reviews and assessments of the effectiveness of your security controls.
DS-K3G411 Series Tripod Turnstile User Manual
ii
Regulatory Information
FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body. FCC Conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation.
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed
DS-K3G411 Series Tripod Turnstile User Manual
iii
under the EMC Directive 2014/30/EU, RE Directive 2014/53/EU,the RoHS Directive 2011/65/EU
2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info
2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see:www.recyclethis.info
DS-K3G411 Series Tripod Turnstile User Manual
iv
Safety Instruction
These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into Dangers and Cautions: Dangers: Neglecting any of the warnings may cause serious injury or death. Cautions: Neglecting any of the cautions may cause injury or equipment damage.
Dangers: Follow these safeguards to prevent serious injury or death.
Cautions: Follow these precautions to prevent potential injury or material damage.
Danger: In the use of the product, you must be in strict compliance with the electrical safety regulations
of the nation and region. The equipment must be connected to an earthed mains socket-outlet. Shock hazard! Disconnect all power sources before maintenance. Do not touch the bare metal contacts of the inlets after the circuit breaker is turned off.
Electricity still exists. This equipment is not suitable for use in locations where children are likely to be present. To prevent possible hearing damage, do not listen at high volume levels for long periods. All the electronic operation should be strictly compliance with the electrical safety regulations, fire prevention regulations and other related regulations in your local region.
Please use the power adapter, which is provided by normal company. The power consumption cannot be less than the required value.
Do not connect several devices to one power adapter as adapter overload may cause over-heat or fire hazard.
Please make sure that the power has been disconnected before you wire, install or dismantle the device. If the top caps should be open and the device should be powered on for maintenance, make sure: 1. Power off the fan to prevent the operator from getting injured accidentally. 2. Do not touch bare high-voltage components. 3. Make sure the switch's wiring sequence is correct after maintenance.
Please make sure that the power has been disconnected before you wire, install or dismantle the device.
When the product is installed on wall or ceiling, the device shall be firmly fixed. If smoke, odors or noise rise from the device, turn off the power at once and unplug the power
cable, and then please contact the service center. Do not ingest battery, Chemical Burn Hazard.
DS-K3G411 Series Tripod Turnstile User Manual
v
This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
If the product does not work properly, please contact your dealer or the nearest service center. Never attempt to disassemble the device yourself. (We shall not assume any responsibility for problems caused by unauthorized repair or maintenance.)
The Terminal PE of the switch should be connect to a ground wire.
Cautions: The equipment shall not be exposed to dripping or splashing and that no objects filled with
liquids, such as vases, shall be placed on the equipment. The equipment has been designed, when required, modified for connection to an IT power distribution system.
Ensure correct wiring of the terminals for connection to an AC mains supply. Provide a surge suppressor at the inlet opening of the equipment under special conditions such
as the mountain top, iron tower, and forest. The equipment has been designed, when required, modified for connection to an IT power distribution system.
No naked flame sources, such as lighted candles, should be placed on the equipment. The ventilation should not be impeded by covering the ventilation openings with items, such as
newspapers, table-cloths, curtains, etc. The openings shall never be blocked by placing the equipment on a bed, sofa, rug or other similar surface.
This equipment is suitable for mounting on concrete or other non-combustible surface only. The serial port of the equipment is used for debugging only. Install the equipment according to the instructions in this manual.
To prevent injury, this equipment must be securely attached to the floor/base of the turnstile in accordance with the installation instructions.
Keep straight down when moving or using the equipment. Never place the equipment in an unstable location. The equipment may fall, causing serious
personal injury or death. Stainless steel may be corroded in some circumstances. You need to clean and care the device by
using the stainless steel cleaner. It is suggested to clean the device every month. Do not drop the device or subject it to physical shock, and do not expose it to high electromagnetism radiation. Avoid the equipment installation on vibrations surface or places subject to shock (ignorance can cause equipment damage).
Do not place the device in extremely hot (refer to the specification of the device for the detailed operating temperature), cold, dusty or damp locations, and do not expose it to high electromagnetic radiation.
The device cover for indoor use shall be kept from rain and moisture. Exposing the equipment to direct sun light, low ventilation or heat source such as heater or
radiator is forbidden (ignorance can cause fire danger).
DS-K3G411 Series Tripod Turnstile User Manual
vi
Do not aim the device at the sun or extra bright places. A blooming or smear may occur otherwise (which is not a malfunction however), and affecting the endurance of sensor at the same time.
Please use the provided glove when open up the device cover, avoid direct contact with the device cover, because the acidic sweat of the fingers may erode the surface coating of the device cover.
Please use a soft and dry cloth when clean inside and outside surfaces of the device cover, do not use alkaline detergents.
Please keep all wrappers after unpack them for future use. In case of any failure occurred, you need to return the device to the factory with the original wrapper. Transportation without the original wrapper may result in damage on the device and lead to additional costs.
Improper use or replacement of the battery may result in hazard of explosion. Replace with the same or equivalent type only. Dispose of used batteries according to the instructions provided by the battery manufacturer.
Biometric recognition products are not completely applicable to anti-spoofing environments. If you require a higher security level, use multiple authentication modes.
Do not stay in the lane when the device is rebooting. RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED
BATTERIES ACCORDING TO THE INSTRUCTIONS. SUITABLE FOR MOUNTING ON CONCRETE OR OTHER NON-COMBUSTIBLE SURFACE ONLY. The instructions shall require connection of the equipment protective earthing conductor to the installation protective earthing conductor.
DS-K3G411 Series Tripod Turnstile User Manual
vii
Available Models
Product Name Model
Tripod Turnstile DS-K3G411
DS-K3G411 Series Tripod Turnstile User Manual
viii
Contents Chapter 1 Overview .................................................................................................................... 1
1.1 Introduction ........................................................................................................................... 1
1.2 Main Features ........................................................................................................................ 1
Chapter 2 System Wiring ............................................................................................................ 3
Chapter 3 Installation ................................................................................................................. 5
3.1 Disassemble Pedestals ........................................................................................................... 5
3.2 Install Pedestals ..................................................................................................................... 5
Chapter 4 General Wiring ......................................................................................................... 10
4.1 Components Introduction .................................................................................................... 10
4.2 Wiring Electric Supply .......................................................................................................... 10
4.3 Wire Network Switch ........................................................................................................... 11
4.4 Terminal Description ............................................................................................................ 13
4.4.1 Access Control Board Terminal and BUS Terminal Description ................................... 13
4.4.2 Access Control Board DIP Switch Description ............................................................. 22
4.4.3 RS-485 Wiring ............................................................................................................. 27
4.4.4 RS-232 Wiring ............................................................................................................. 29
4.4.5 Wiegand Wiring .......................................................................................................... 30
4.4.6 Barrier Control Wiring ................................................................................................. 30
4.4.7 Alarm Output Wiring ................................................................................................... 32
4.4.8 Fire Alarm Module Wiring ........................................................................................... 33
4.4.9 Exit Button Wiring ....................................................................................................... 33
Chapter 5 Device Settings ......................................................................................................... 35
5.1 Pair Keyfob (Optional) .......................................................................................................... 35
5.2 Initialize Device .................................................................................................................... 36
5.3 Relay Output NO/NC Settings .............................................................................................. 37
5.3.1 Alarm Relay Output Mode (NO/NC) ............................................................................ 37
DS-K3G411 Series Tripod Turnstile User Manual
ix
5.3.2 Barrier Control Relay Output Mode ............................................................................ 38
Chapter 6 Activation ................................................................................................................. 41
6.1 Activate via SADP ................................................................................................................. 41
6.2 Activate Device via Client Software ...................................................................................... 42
Chapter 7 Client Software Configuration ................................................................................... 44
7.1 Configuration Flow of Client Software ................................................................................. 44
7.2 Device Management ............................................................................................................ 44
7.2.1 Add Device .................................................................................................................. 45
7.2.2 Reset Device Password ................................................................................................ 51
7.3 Group Management ............................................................................................................. 51
7.3.1 Add Group ................................................................................................................... 52
7.3.2 Import Resources to Group ......................................................................................... 52
7.3.3 Edit Resource Parameters ........................................................................................... 52
7.3.4 Remove Resources from Group .................................................................................. 53
7.4 Person Management ............................................................................................................ 53
7.4.1 Add Organization ........................................................................................................ 53
7.4.2 Configure Basic Information ....................................................................................... 54
7.4.3 Issue a Card by Local Mode ......................................................................................... 55
7.4.4 Upload a Face Photo from Local PC ............................................................................ 57
7.4.5 Take a Photo via Client ................................................................................................ 58
7.4.6 Collect Face via Access Control Device ....................................................................... 59
7.4.7 Collect Fingerprint via Client ....................................................................................... 60
7.4.8 Configure Access Control Information ........................................................................ 61
7.4.9 Customize Person Information .................................................................................... 62
7.4.10 Configure Resident Information ................................................................................ 63
7.4.11 Configure Additional Information ............................................................................. 63
7.4.12 Import and Export Person Identify Information ........................................................ 64
7.4.13 Import Person Information ....................................................................................... 64
DS-K3G411 Series Tripod Turnstile User Manual
x
7.4.14 Import Person Pictures ............................................................................................. 65
7.4.15 Export Person Information ........................................................................................ 65
7.4.16 Export Person Pictures .............................................................................................. 66
7.4.17 Get Person Information from Access Control Device ................................................ 66
7.4.18 Move Persons to Another Organization .................................................................... 67
7.4.19 Issue Cards to Persons in Batch ................................................................................. 67
7.4.20 Report Card Loss ....................................................................................................... 67
7.4.21 Set Card Issuing Parameters ...................................................................................... 68
7.5 Configure Schedule and Template ....................................................................................... 69
7.5.1 Add Holiday ................................................................................................................. 69
7.5.2 Add Template .............................................................................................................. 70
7.6 Set Access Group to Assign Access Authorization to Persons .............................................. 71
7.7 Configure Advanced Functions ............................................................................................ 73
7.7.1 Configure Device Parameters ...................................................................................... 74
7.7.2 Configure Remaining Open/Closed ............................................................................. 79
7.7.3 Configure Multi-Factor Authentication ....................................................................... 80
7.7.4 Configure Custom Wiegand Rule ................................................................................ 82
7.7.5 Configure Card Reader Authentication Mode and Schedule ...................................... 84
7.7.6 Configure First Person In ............................................................................................. 86
7.7.7 Configure Anti-Passback ............................................................................................. 87
7.7.8 Configure Device Parameters ...................................................................................... 88
7.8 Configure Linkage Actions for Access Control ...................................................................... 89
7.8.1 Configure Client Actions for Access Event ................................................................... 89
7.8.2 Configure Device Actions for Access Event ................................................................. 90
7.8.3 Configure Device Actions for Card Swiping ................................................................. 92
7.9 Door Control ........................................................................................................................ 93
7.9.1 Control Door Status ..................................................................................................... 93
7.9.2 Check Real-Time Access Records ................................................................................ 94
DS-K3G411 Series Tripod Turnstile User Manual
xi
7.10 Event Center ...................................................................................................................... 96
7.10.1 Enable Receiving Event from Devices ....................................................................... 96
7.10.2 View Real-Time Events .............................................................................................. 97
7.10.3 Search Historical Events ............................................................................................ 98
7.11 Remote Configuration via Client Software ....................................................................... 100
7.11.1 Check Device Information ....................................................................................... 100
7.11.2 Edit Device Name .................................................................................................... 100
7.11.3 Edit Time ................................................................................................................. 100
7.11.4 Set System Maintenance ......................................................................................... 101
7.11.5 Manage Network User ............................................................................................ 101
7.11.6 Manage Keyfob User ............................................................................................... 102
7.11.7 Set Security ............................................................................................................. 102
7.11.8 Configure Screen Parameters .................................................................................. 103
7.11.9 Configure Screen Parameters .................................................................................. 103
7.11.10 Configure Advanced Network ............................................................................... 104
7.11.11 Configure Audio File .............................................................................................. 104
7.11.12 View Relay Status .................................................................................................. 105
Appendix A. Tips When Collecting/Comparing Face Picture .................................................... 106
Appendix B. Tips for Scanning Fingerprint ............................................................................... 107
Appendix C. DIP Switch Description ........................................................................................ 109
Appendix D. Event and Alarm Type ......................................................................................... 110
Appendix E. Table of Audio Index Related Content .................................................................. 111
Appendix F. Communication Matrix and Device Command ..................................................... 112
DS-K3G411 Series Tripod Turnstile User Manual
xii
Chapter 1 Overview
1.1 Introduction
The tripod turnstile is designed to detect unauthorized entrance or exit. By adopting the turnstile integratedly with the access control system, person should authenticate to pass through the lane via swiping IC or ID card, scanning QR code, etc. It is widely used in attractions, stadiums, construction sites, residences, etc.
1.2 Main Features 32-bit high-speed processor TCP/IP network communication
The communication data is specially encrypted to relieve the concern of privacy leak Remaining open/closed mode selectable Bidirectional (Entering/Exiting) lane
The barrier opening and closing speed can be configured according to the visitor flow Self-detection, Self-diagnostics, and automatic alarm Remote control and management Online/offline operation LED indicates the entrance/exit and passing status Barrier is in free status when powered down. People can pass through the lane along single/both
singe and double directions Fire alarm passing
DS-K3G411 Series Tripod Turnstile User Manual
1
When the fire alarm is triggered, the barrier will be dropped down automatically for emergency evacuation
Valid passing duration settings System will cancel the passing permission if a person does not pass through the lane within the valid passing duration
Opens/Closes barrier according to the schedule template Up to 3000 visitor cards and up to 60,000 cards except for visitor cards can be added Up to 180,000 presenting card events can be recorded Adjustable strip light brightness
DS-K3G411 Series Tripod Turnstile User Manual
2
Chapter 2 System Wiring
The preparation before installation and general wiring.
Steps 1. Draw a central line on the installation surface of the left or right pedestal. 2. Draw other parallel lines for installing the other pedestals.
Note The distance between the nearest two line is 581+200 mm. L represents the lane width.
3. Slotting on the installation surface and dig installation holes according to the hole position diagram.
Figure 2-1 Hole Position Diagram 4. Bury cables. Each lane buries 1 network cable and 1 high voltage cable. For details, see the
system wiring diagram below.
DS-K3G411 Series Tripod Turnstile User Manual
3
Figure 2-2 System Wiring Diagram
Note The suggested inner diameter of the low voltage conduit is larger than 30 mm. If the face recognition module are required to be connected on the left lane, you should
increase the conduit diameter or bury another conduit for the external cables. You should bury one network cable and one high voltage conduit for the right and middle
lane. The network cable must be CAT5e or the network cable has better performance. And the
suggested network cable length should be less than 100 m.
DS-K3G411 Series Tripod Turnstile User Manual
4
Chapter 3 Installation
3.1 Disassemble Pedestals Before installation, you should use the key to open the pedestals. View the pictures below to find the lock holes.
Figure 3-1 Lock Holes
3.2 Install Pedestals Before You Start Prepare for the installation tools, check the device and the accessories, and clear the installation base.
DS-K3G411 Series Tripod Turnstile User Manual
5
Steps
Note The device should be installed on the concrete surface or other non-flammable surfaces. No face recognition terminal installed: If the installation area is too close to the wall, make sure
the distance between the pedestal and the wall should be more than 20 mm, or the surface may be scratched.
Face recognition terminal installed: If the installation area is too close to the wall, make sure the distance between the pedestal and the wall should be more than 20 mm, or the surface may be scratched.
DS-K3G411 Series Tripod Turnstile User Manual
6
The dimension is as follows.
DS-K3G411 Series Tripod Turnstile User Manual
7
Figure 3-2 Dimension
1. Prepare for the installation tools, check the components, and prepare for the installation base. 2. Drill holes on the ground according to the installation holes on the pedestals and insert the
expansion sleeves. 3. Seal the bottom of the turnstile to avoid water from entering.
Note Make sure the installation holes on the pedestals and the base are aligned with each other.
4. Secure the pedestals with expansion bolts.
Note Do not immerse the pedestal in the water. In special circumstances, the immersed height
should be no more than 690 mm. The installation footprint is as follows:
DS-K3G411 Series Tripod Turnstile User Manual
8
Figure 3-3 Installation Footprint
5. Install the arms with 3 screws.
Note Apply thread glue on the screws before securing the arms, in order to prevent the arms from dropping down because of the vibration or the long time usage of the device.
DS-K3G411 Series Tripod Turnstile User Manual
9
Chapter 4 General Wiring
4.1 Components Introduction By default, basic components of the turnstile are connected well. The turnstile supports wiring the AC electric supply for the whole system's power supply.
Note The voltage fluctuation of the electric supply is between 100 VAC and 220 VAC, 50 to 60 Hz.
The picture displayed below describes each component's position on the turnstile.
Figure 4-1 Components Diagram 1
4.2 Wiring Electric Supply Wire electric supply with the switch in the pedestal. Terminal L and terminal N are on the switch, while terminal PE should connect to a ground wire (yellow and green wire).
DS-K3G411 Series Tripod Turnstile User Manual
10
Warning Terminal PE should connect to a ground wire to avoid hazard when people touching the device.
Note The cable bare part should be no more than 8 mm. If possible, wear an insulation cap at the end
of the bare cable. Make sure theres no bare copper or cable after the wiring. The Terminal L and the Terminal N cannot be wired reversely. Do not wire the input and output
terminal reversely. To avoid people injury and device damage, when testing, the ground resistance of the equipotential points should not be larger than 2
4.3 Wire Network Switch Connect the network cable and the network switch.
Steps
Note The device do not support the PoE network switch. Connecting with the PoE network switch may damage the control board.
DS-K3G411 Series Tripod Turnstile User Manual
11
1. Use the key to open the side panel of the pedestal.
Figure 4-2 Open Side Panel 2. Connect the network cable with the network switch.
DS-K3G411 Series Tripod Turnstile User Manual
12
Figure 4-3 Network Switch Position
4.4 Terminal Description
4.4.1 Access Control Board Terminal and BUS Terminal Description
DS-K3G411 Series Tripod Turnstile User Manual
13
Access Control Board Description
Figure 4-4 Access Control Board Diagram
Table 4-1 Access Control Board Terminal Description Table
Interface Name Terminal Name Description Remark
24 V Power Input +24 V 24 V Power Output /
GND Grounding
Audio OUT Audio Output /
IN Audio Input
Alarm Output 2 NO/NC2 Alarm Output Relay 2 (Dry Contact) Note
The alarm output supports relay output.
COM2
DS-K3G411 Series Tripod Turnstile User Manual
14
Interface Name Terminal Name Description Remark
Alarm Output 1 NO/NC1 Alarm Output Relay 1 (Dry Contact) Note
The alarm output supports relay output.
COM1
Door Lock 2 D2+ Door 2 Relay Output (Dry Contact) Note
For any requirements, the door lock can control the door barrier status of the third party. D1 controls the barrier opening for entrance, while D2 controls the door opening for exit. For details, see Barrier Control Relay Output Mode .
D2-
Door Lock 1 D1+ Door 1 Relay Output (Dry Contact) Note
For any requirements, the door lock can control the door barrier status of the third party. D1 controls the barrier opening for entrance, while D2 controls the door opening for exit. For details, see Barrier Control Relay Output Mode .
D1-
Exit Button K1 Door 1 Signal Input /
GND Grounding
K2 Door 2 Signal Input
Fire Input XF Fire System Input /
GND Grounding
DS-K3G411 Series Tripod Turnstile User Manual
15
Interface Name Terminal Name Description Remark
Event Input CASE1 Event Alarm Input 1 Note
The alarm input hardware interface is normally open by default. So only the normally open signal is allowed. It can be linked to the buzzer of the card reader and access controller, and the alarm relay output and open door relay output.
GND Grounding
CASE2 Event Alarm Input 2
Network Interface LAN Network Accessing /
Side Light Board / Light Board Accessing /
Arm Position Control Board
/ Arm Position Control Board Accessing
/
Debugging Port / For Debugging Only /
Suction Type Electromagnet
/ Suction Type Electromagnet Accessing
/
Push Pull Type Electromagnet
/ Push Pull Type Electromagnet Accessing
/
BUS / BUS Accessing Note
For details, see the BUS terminal description table below.
RS-485F/RS-232F 485F+ RS-485+ Terminal of Face Recognition Terminal Accessing (Default)
Note The DIP of RS-485
card ID is set as 1 and 4 by default. 1
DS-K3G411 Series Tripod Turnstile User Manual
16
Interface Name Terminal Name Description Remark
485F- RS-485- Terminal of Face Recognition Terminal Accessing (Default)
is for entering, and 4 is for exiting.
If the visitor card is configured, you should wire two card readers for the exiting side. One's DIP address is 4, and the other is 3. Card Reader 3 can be applied together with the card receiver. The normal user can authenticate on Card Reader 4 and the visitor can authenticate on Card Reader 3.
You can switch the communication mode between RS-485 and RS-232. For details about the DIP switch description, see Access Control Board DIP Switch Description
GND Grounding
RS-485I/RS-232I 485I+ RS-485+ Terminal of Face Recognition Terminal Accessing (Default)
Note The DIP of RS-485
card ID is set as 1 and 4 by default. 1 is for entering, and 4 is for exiting.
If the visitor card is configured, you should wire two card readers for the
485I- RS-485- Terminal of Face Recognition Terminal Accessing (Default)
GND Grounding
DS-K3G411 Series Tripod Turnstile User Manual
17
Interface Name Terminal Name Description Remark
exiting side. One's DIP address is 4, and the other is 3. Card Reader 3 can be applied together with the card receiver. The normal user can authenticate on Card Reader 4 and the visitor can authenticate on Card Reader 3.
You can switch the communication mode between RS-485 and RS-232. For details about the DIP switch description, see Access Control Board DIP Switch Description
RS-485C/RS-232C 485C+ RS-232_RX Terminal of Fingerprint Recorder Accessing (Default)
Note The DIP of RS-485
card ID is set as 1 and 4 by default. 1 is for entering, and 4 is for exiting.
If the visitor card is configured, you should wire two card readers for the exiting side. One's DIP address is 4, and the other is 3. Card Reader 3 can be applied together with the card
485C- RS-232_TX Terminal of Fingerprint Recorder Accessing (Default)
GND Grounding
DS-K3G411 Series Tripod Turnstile User Manual
18
Interface Name Terminal Name Description Remark
receiver. The normal user can authenticate on Card Reader 4 and the visitor can authenticate on Card Reader 3.
You can switch the communication mode between RS-485 and RS-232. For details about the DIP switch description, see Access Control Board DIP Switch Description
RS-232H 232H+ RS-232_RX Terminal of QR Code Scanner Accessing (Default)
Note The terminal is for
RS-232 communication only. You cannot switch its communication mode.
The RS-232 interface's QR code transmission database should no more than 64 bit.
232H- RS-232_TX Terminal of QR Code Scanner Accessing (Default)
GND Grounding
5 V Power Output 5 V 5 V Power Output /
GND Grounding
Wiegand Card Reader 1
OK1 Indicator of Card Reader Control Output (Invalid Card Output)
Note The Wiegand card reader 1 refers to the card reader (entering).
DS-K3G411 Series Tripod Turnstile User Manual
19
Interface Name Terminal Name Description Remark
ERR1 Indicator of Card Reader Control Output (Valid Card Output)
BZ1 Card Reader Buzzer Control Output
W1_1 Wiegand Reading Data Input Data1
W0_1 Wiegand Reading Data Input Data0
GND Grounding
Wiegand Card Reader 2
OK2 Indicator of Card Reader Control Output (Invalid Card Output)
Note The Wiegand card reader 1 refers to the card reader (entering).ERR2 Indicator of Card
Reader Control Output (Valid Card Output)
BZ2 Card Reader Buzzer Control Output
W1_2 Wiegand Reading Data Input Data1
W0_2 Wiegand Reading Data Input Data0
GND Grounding
BUS Terminal Description You can connect the card reader, QR code scanner, etc. via the BUS terminal.
Table 4-2 BUS Terminal Description Table
Interface Name Terminal Name Color Description
Lane Controller Light Board 1
12V Red
PD_485+ Yellow RS-485+ of Light Board Accessing
PD_485- Blue RS-485- of Light Board Accessing
DS-K3G411 Series Tripod Turnstile User Manual
20
Interface Name Terminal Name Color Description
GND Black Grounding
Lane Controller Light Board 1
12V Red 12 V Power Terminal
PD_485+ Yellow RS-485+ of Light Board Accessing
PD_485- Blue RS-485- of Light Board Accessing
GND Black Grounding
UART 1 (In Card Reader)
Note For RS-485A/RS-232A
12V Red 12 V Power Terminal
PA_485/232+ Yellow RS-485+ of Card Reader Accessing (Default)
PA_485/232- Blue RS-485- of Card Reader Accessing (Default)
GND Black Grounding
TAMPER TAMPER Brown TAMPER
GND Brown Grounding
UART 8 (QR Code)
Note For RS-232G
5V Red 5 V Power Terminal
232+ Blue RS-232- of QR Code Scanner Accessing (Default)
232- Green RS-232- of QR Code Scanner Accessing (Default)
GND Black Grounding
UART 5 (Out Card Reader)
Note For RS-232E/RS-485E
12V Red 12 V Power Terminal
485/232+ Yellow RS-485+ of Card Reader Accessing (Default)
485/232- Blue RS-485- of Card Reader Accessing (Default)
GND Black Grounding
DS-K3G411 Series Tripod Turnstile User Manual
21
Interface Name Terminal Name Color Description
UART 2 (Out Fingerprint)
Note For RS-232B/RS485B
5V Red 5 V Power Terminal
PB_485/232+ Purple RS-232_RX of Fingerprint Recorder Accessing (Default)
PB_485/232- Yellow RS-232_TX of Fingerprint Recorder Accessing (Default)
GND Black Grounding
4.4.2 Access Control Board DIP Switch Description
You can set the device mode, switch the communication mode between RS-232 and RS-485, initialize the device via the DIP switch on the access control board.
DS-K3G411 Series Tripod Turnstile User Manual
22
Figure 4-5 DIP Switch on Access Control Board
You can set the device mode via the 8-bit DIP switch. You can switch the communication mode between RS-232 and RS-485 via DIP A, DIP B, DIP C, DIP E, DIP F, and DIP I. The corresponded UART No. of the DIP switch is as follows:
DS-K3G411 Series Tripod Turnstile User Manual
23
Figure 4-6 UART No. Diagram
The function of different DIP switches are as follows:
Table 4-3 Function of DIP Switch
DIP Switch Name DIP Switch Bit UART No. Function Diagram
8-bit DIP Switch 1 to 2 (Work Mode)
/ Normal Mode
Test Mode
DS-K3G411 Series Tripod Turnstile User Manual
24
DIP Switch Name DIP Switch Bit UART No. Function Diagram
3 (Memory Mode) / Enable Memory Mode
Disable Memory Mode
4 (Keyfob Pairing Mode)
/ Enable Keyfob Pairing Mode
Disable Keyfob Pairing Mode
5 to 8 (Passing Mode)
/ Controlled Bi- direction
Controlled Entrance and Prohibit Exit
Controlled Entrance and Free Exit
Free Bi-direction
Free Entrance and Controlled Exit
Free Entrance and Prohibit Exit
Prohibited Bi- direction
DS-K3G411 Series Tripod Turnstile User Manual
25
DIP Switch Name DIP Switch Bit UART No. Function Diagram
Prohibit Entrance and Controlled Exit
Prohibit Entrance and Free Exit
DIP A 1 to 3 UART 1 ON: UART 1 is RS- 232A Interface
/
4 to 6 ON: UART 1 is RS- 485A Interface
/
DIP B 1 to 3 UART 2 ON: UART 2 is RS- 232B Interface
/
4 to 6 ON: UART 2 is RS- 485B Interface
/
DIP C 1 to 3 UART 3 ON: UART 3 is RS- 232C Interface
/
4 to 6 ON: UART 3 is RS- 485C Interface
/
DIP E 1 to 3 UART 5 ON: UART 5 is RS- 232E Interface
/
4 to 6 ON: UART 5 is RS- 485E Interface
/
DIP F 1 to 3 UART 6 ON: UART 6 is RS- 232F Interface
/
4 to 6 ON: UART 6 is RS- 485F Interface
/
DIP I 1 to 3 UART 4 ON: UART 4 is RS- 232I Interface
/
4 to 6 ON: UART 4 is RS- 485I Interface
/
Note Bit 1 to 3 and bit 4 to 6 of DIP switch A, B, C, E, F, and I cannot be ON at the same time.
The UART No., the related tag, and the tag's position are as follows:
DS-K3G411 Series Tripod Turnstile User Manual
26
Figure 4-7 Interface and Corresponded UART No.
4.4.3 RS-485 Wiring
Note When the RS-485 terminal should connect with card reader, the DIP switch for entrance is 1, for
exit is 4. The RS-485 ID should not be duplicated when connecting to multiple RS-485 devices.
DS-K3G411 Series Tripod Turnstile User Manual
27
Note There are four RS-485 interfaces, which are for connecting ID card reader, IC card reader, QR
code scanner, fingerprint and card reader, card recycler, text screen, fingerprint reader, and face recognition terminal. Take the wiring of RS-485 card reader as an example.
For details about text screen, see Configuring Screen Parameters in User Manual of iVMS-4200 AC Client Software.
DS-K3G411 Series Tripod Turnstile User Manual
28
4.4.4 RS-232 Wiring
Note The RS-232 interfaces can connect QR code scanner, card recycler, and text screen. For details about text screen, see Configuring Screen Parameters in User Manual of iVMS-4200
AC Client Software. Take the wiring of text screen as an example.
DS-K3G411 Series Tripod Turnstile User Manual
29
4.4.5 Wiegand Wiring
Note Connect the OK/ERR/BZ if the access controller should control the LED and buzzer of the Wiegand card reader.
4.4.6 Barrier Control Wiring
By default, the barrier has connected with the access control board. If possible, the device can connect with a third party control board to control the third party barriers. Interface D1 controls barrier opening for entrance, while interface D2 controls barrier opening for exit.
DS-K3G411 Series Tripod Turnstile User Manual
30
Note The output signal is relay. The terminals cannot connect with the devices carrying voltage.
Entering Wiring
DS-K3G411 Series Tripod Turnstile User Manual
31
Exiting Wiring
4.4.7 Alarm Output Wiring
Note For details about changing the relay output status via the jumper cap, see Alarm Relay Output Mode (NO/NC) .
DS-K3G411 Series Tripod Turnstile User Manual
32
4.4.8 Fire Alarm Module Wiring
You can view the fire alarm module wiring diagram.
Figure 4-8 Fire Alarm Module Wiring
4.4.9 Exit Button Wiring
You can view the exit button wiring diagram.
DS-K3G411 Series Tripod Turnstile User Manual
33
Figure 4-9 Exit Button Wiring
DS-K3G411 Series Tripod Turnstile User Manual
34
Chapter 5 Device Settings
You can also set the turnstile to passing mode and memory mode, pair the keyfob, initialize the hardware, switching between RS-485 communication mode and RS-232 communication mode, and view relay output NO/NC diagram by setting the DIP switch on the access control board. Normal Mode: The device will work properly. Passing Mode: There are 9 passing modes, including controlled bi-direction, controlled entrance
and prohibited exit, controlled entrance and free exit, free bi-direction, free entrance and controlled exit, free entrance and prohibited exit, prohibited bi-direction, prohibited entrance and free exit.
Memory Mode: By default, the memory mode is enabled. When multiple cards are presented and authenticated, it allows multiple persons passing through the lane. When it counts the passing people number is equal to the card presented times, or no person passing through the lane after the last person passing, the barriers will be closed.
Note You can also set the DIP switch on the access control board to control the entrance and exit controlling type, keyfob pairing, etc. For details about the DIP switch value, see .
5.1 Pair Keyfob (Optional) Pair the remote control to the device through DIP switch to open/close the barrier remotely.
Before You Start Ask our technique supports or sales and purchase the keyfob.
Steps 1. Power off the turnstile. 2. Set the No.4 switch of the 8-digit DIP Switch on the access control board to the ON side.
3. Power on the turnstile and it will enter the keyfob pairing mode. 4. Hold the Close button for more than 10 seconds.
The keyfob's indicator of the will flash twice if the pairing is completed. 5. Set the DIP switch as OFF (the number side), and reboot the turnstile to take effect.
DS-K3G411 Series Tripod Turnstile User Manual
35
Note You can also pair the keyfob via the client software. For details, see Manage Keyfob User . Only one turnstile can pair the keyfob. If multiple turnstiles are in the pairing mode, the
keyfob will select only one of them to pair. For details about DIP switch value and meaning, see .
6. Optional: Go to System User Keyfob User on the remote control page of the client software to delete the keyfob.
5.2 Initialize Device Steps 1. Remove the jumper cap of initialization pin on the access control board.
Figure 5-1 Initialization Jumper Cap 2. Disconnect the power and reboot the device. The device buzzer buzzes a long beep. 3. When the beep stopped, plug the jumper cap back. 4. Disconnect the power and power on the device again.
DS-K3G411 Series Tripod Turnstile User Manual
36
Caution The initialization of the device will restore all the parameters to the default setting and all the device events are deleted.
Note Make sure no persons are in the lane when powering on the device.
5.3 Relay Output NO/NC Settings
5.3.1 Alarm Relay Output Mode (NO/NC)
Alarm Relay Output Mode (NO):
Alarm Relay Output Mode (NC):
DS-K3G411 Series Tripod Turnstile User Manual
37
5.3.2 Barrier Control Relay Output Mode
Barrier Control Relay Output Mode (NO):
DS-K3G411 Series Tripod Turnstile User Manual
38
Barrier Control Relay Output Mode (NC):
DS-K3G411 Series Tripod Turnstile User Manual
39
DS-K3G411 Series Tripod Turnstile User Manual
40
Chapter 6 Activation
You should activate the device before the first login. After powering on the device, the system will switch to Device Activation page.
Activation via the device, SADP tool and the client software are supported. The default values of the device are as follows: The default IP address: 192.0.0.64 The default port No.: 8000 The default user name: admin
6.1 Activate via SADP SADP is a tool to detect, activate and modify the IP address of the device over the LAN.
Before You Start Get the SADP software from the supplied disk or the official website http:// www.hikvision.com/en/ , and install the SADP according to the prompts.
The device and the PC that runs the SADP tool should be within the same subnet. The following steps show how to activate a device and modify its IP address. For batch activation and IP addresses modification, refer to User Manual of SADP for details.
Steps 1. Run the SADP software and search the online devices. 2. Find and select your device in online device list. 3. Input new password (admin password) and confirm the password.
Caution STRONG PASSWORD RECOMMENDED-We highly recommend you create a strong password of your own choosing (using a minimum of 8 characters, including upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product.
4. Click Activate to start activation.
DS-K3G411 Series Tripod Turnstile User Manual
41
Status of the device becomes Active after successful activation. 5. Modify IP address of the device.
1) Select the device. 2) Change the device IP address to the same subnet as your computer by either modifying the IP
address manually or checking Enable DHCP. 3) Input the admin password and click Modify to activate your IP address modification.
6.2 Activate Device via Client Software For some devices, you are required to create the password to activate them before they can be added to the software and work properly.
Steps
Note This function should be supported by the device.
1. Enter the Device Management page. 2. Click on the right of Device Management and select Device. 3. Click Online Device to show the online device area.
The searched online devices are displayed in the list. 4. Check the device status (shown on Security Level column) and select an inactive device. 5. Click Activate to open the Activation dialog. 6. Create a password in the password field, and confirm the password.
DS-K3G411 Series Tripod Turnstile User Manual
42
Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you change your password regularly, especially in the high security system, changing the password monthly or weekly can better protect your product. Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user.
7. Click OK to activate the device.
DS-K3G411 Series Tripod Turnstile User Manual
43
Chapter 7 Client Software Configuration
7.1 Configuration Flow of Client Software Follow the flow diagram below to configure on the client software.
Figure 7-1 Flow Diagram of Configuration on Client Software
7.2 Device Management The client supports managing access control devices and video intercom devices.
DS-K3G411 Series Tripod Turnstile User Manual
44
Example You can control entrance & exit and manage attendance after adding access control devices to the client; you can perform video intercom with the indoor stations and door stations.
7.2.1 Add Device
The client provides three device adding modes including by IP/domain, IP segment, and ISUP protocol. The client also supports importing multiple devices in a batch when there are large amount of devices to be added.
Add Online Device
The active online devices in the same local subnet with the client software will be displayed on the Online Device area. You can click Refresh Every 60s to refresh the information of the online devices.
Add Single Online Device
You can add single online device to the client software.
Steps 1. Enter the Device Management module. 2. Optional: Click on the right of Device Management and select Device. 3. Click Online Device to show the online device area.
The searched online devices are displayed in the list. 4. Select an online device from the Online Device area.
Note For the inactive device, you need to create the password for it before you can add the device properly. For detailed steps, refer to Activation .
5. Click Add to open the device adding window. 6. Enter the required information.
Name Enter a descriptive name for the device.
Address The IP address of the device is obtained automatically in this adding mode.
Port The port number is obtained automatically.
User Name By default, the user name is admin.
DS-K3G411 Series Tripod Turnstile User Manual
45
Password Enter the device password.
Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you change your password regularly, especially in the high security system, changing the password monthly or weekly can better protect your product. Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user.
7. Optional: Check Synchronize Time to synchronize the device time with the PC running the client after adding the device to the client.
8. Optional: Check Import to Group to create a group by the device name.
Note You can import all the channels of the device to the corresponding group by default.
9. Click OK to add the device.
Add Multiple Online Devices
You can add multiple online devices to the client software.
Steps 1. Enter the Device Management module. 2. Click on the right of Device Management and select Device. 3. Click Online Device to show the online device area.
The searched online devices are displayed in the list. 4. Select multiple devices.
Note For the inactive device, you need to create the password for it before you can add the device properly. For detailed steps, refer to Activation .
5. Click Add to open the device adding window. 6. Enter the required information.
User Name By default, the user name is admin.
Password Enter the device password.
DS-K3G411 Series Tripod Turnstile User Manual
46
Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you change your password regularly, especially in the high security system, changing the password monthly or weekly can better protect your product. Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user.
7. Optional: Check Synchronize Time to synchronize the device time with the PC running the client after adding the devices to the client.
8. Optional: Check Import to Group to create a group by the device name.
Note You can import all the channels of the device to the corresponding group by default.
9. Click OK to add the devices.
Add Device by IP Address or Domain Name
If you know the IP address or domain name of the device to add, you can add devices to the client by specifying the IP address (or domain name), user name, password, etc.
Steps 1. Enter Device Management module. 2. Click Device tab on the top of the right panel.
The added devices are displayed on the right panel. 3. Click Add to open the Add window, and then select IP/Domain as the adding mode. 4. Enter the required information.
Name Create a descriptive name for the device. For example, you can use a nickname that can show the location or feature of the device.
Address The IP address or domain name of the device.
Port The devices to add share the same port number. The default value is 8000.
User Name Enter the device user name. By default, the user name is admin.
Password Enter the device password.
DS-K3G411 Series Tripod Turnstile User Manual
47
Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you change your password regularly, especially in the high security system, changing the password monthly or weekly can better protect your product. Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user.
5. Optional: Check Transmission Encryption (TLS) to enable transmission encryption using TLS (Transport Layer Security) protocol for security purpose.
Note This function should be supported by the device. If you have enabled Certificate Verification, you should click Open Certificate Directory to
open the default folder, and copy the certificate file exported from the device to this default directory to strengthen the security. See for details about enabling certificate verification.
You can log into the device to get the certificate file by web browser. 6. Check Synchronize Time to synchronize the device time with the PC running the client after
adding the device to the client. 7. Optional: Check Import to Group to create a group by the device name, and import all the
channels of the device to this group.
Example For access control device, its access points, alarm inputs/outputs, and encoding channels (if exist) will be imported to this group.
8. Finish adding the device. - Click Add to add the device and back to the device list page. - Click Add and New to save the settings and continue to add other device.
Add Devices by IP Segment
If the devices share the same port No., user name and password, and their IP addresses ranges in the same IP segment, you can add them to the client by specifying the start IP address and the end IP address, port No., user name, password, etc of the devices.
Steps 1. Enter the Device Management module. 2. Click Device tab on the top of the right panel.
The added devices are displayed on the right panel. 3. Click Add to open the Add window. 4. Select IP Segment as the adding mode.
DS-K3G411 Series Tripod Turnstile User Manual
48
5. Enter the required information. Start IP
Enter a start IP address. End IP
Enter an end IP address in the same network segment with the start IP. Port
Enter the device port No. The default value is 8000. User Name
By default, the user name is admin. Password
Enter the device password.
Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you change your password regularly, especially in the high security system, changing the password monthly or weekly can better protect your product. Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user.
6. Optional: Check Transmission Encryption (TLS) to enable transmission encryption using TLS (Transport Layer Security) protocol for security purpose .
Note This function should be supported by the device. If you have enabled Certificate Verification, you should click Open Certificate Folder to open
the default folder, and copy the certificate file exported from the device to this default directory to strengthen the security. See for details about enabling certificate verification.
You can log into the device to get the certificate file by web browser. 7. Check Synchronize Time to synchronize the device time with the PC running the client after
adding the device to the client. 8. Optional: Check Import to Group to create a group by the device name, and import all the
channels of the device to the group. 9. Finish adding the device. - Click Add to add the device and back to the device list page. - Click Add and New to save the settings and continue to add other device.
DS-K3G411 Series Tripod Turnstile User Manual
49
Import Devices in a Batch
You can add multiple devices to the client in a batch by entering the device parameters in a pre- defined CSV file.
Steps 1. Enter the Device Management module. 2. Click Device tab on the top of the right panel. 3. Click Add to open the Add window, and then select Batch Import as the adding mode. 4. Click Export Template and then save the pre-defined template (CSV file) on your PC. 5. Open the exported template file and enter the required information of the devices to be added
on the corresponding column.
Note For detailed description of the required fields, refer to the introductions in the template.
Adding Mode Enter 0 or 1 or 2.
Address Edit the address of the device.
Port Enter the device port number. The default port number is 8000.
User Name Enter the device user name. By default, the user name is admin.
Password Enter the device password.
Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you change your password regularly, especially in the high security system, changing the password monthly or weekly can better protect your product. Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user.
Import to Group Enter 1 to create a group by the device name. All the channels of the device will be imported to the corresponding group by default. Enter 0 to disable this function.
6. Click and select the template file.
DS-K3G411 Series Tripod Turnstile User Manual
50
7. Click Add to import the devices.
7.2.2 Reset Device Password
If you forgot the password of the detected online devices, you can reset the device password via the client.
Steps 1. Enter Device Management page. 2. Click Online Device to show the online device area.
All the online devices sharing the same subnet will be displayed in the list. 3. Select the device from the list and click on the Operation column. 4. Reset the device password. - Click Generate to pop up the QR Code window and click Download to save the QR code to
your PC. You can also take a photo of the QR code to save it to your phone. Send the picture to our technical support.
Note For the following operations for resetting the password, contact our technical support.
Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you change your password regularly, especially in the high security system, changing the password monthly or weekly can better protect your product. Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user.
7.3 Group Management The client provides groups to manage the added resources in different groups. You can group the resources into different groups according to the resources' locations.
Example For example, on the 1st floor, there mounted 16 doors, 64 alarm inputs, and 16 alarm outputs. You can organize these resources into one group (named 1st Floor) for convenient management. You can control door status, and do some other operations of the devices after managing the resources by groups.
DS-K3G411 Series Tripod Turnstile User Manual
51
7.3.1 Add Group
You can add group to organize the added device for convenient management.
Steps 1. Enter the Device Management module. 2. Click Device Management Group to enter the group management page. 3. Create a group. - Click Add Group and enter a group name as you want. - Click Create Group by Device Name and select an added device to create a new group by the
name of the selected device.
Note The resources (such as alarm inputs/outputs, access points, etc.) of this device will be imported to the group by default.
7.3.2 Import Resources to Group
You can import the device resources (such as alarm inputs/outputs, access points, etc.) to the added group in a batch.
Before You Start Add a group for managing devices. Refer to Add Group .
Steps 1. Enter the Device Management module. 2. Click Device Management Group to enter the group management page. 3. Select a group from the group list and select the resource type as Access Point, Alarm Input,
Alarm Output, etc. 4. Click Import. 5. Select the thumbnails/names of the resources in the thumbnail/list view.
Note You can click or to switch the resource display mode to thumbnail view or to list view.
6. Click Import to import the selected resources to the group.
7.3.3 Edit Resource Parameters
After importing the resources to the group, you can edit the resource parameters. For access point, you can edit the access point name. For alarm input, you can edit the alarm input name. Here we take access point as an example.
DS-K3G411 Series Tripod Turnstile User Manual
52
Before You Start Import the resources to group.
Steps 1. Enter the Device Management module. 2. Click Device Management Group to enter the group management page.
All the added groups are displayed on the left. 3. Select a group on the group list and click Access Point.
The access points imported to the group will display. 4. Click in the Operation column to open the Edit Resource window. 5. Edit the resource name. 6. Click OK to save the new settings.
7.3.4 Remove Resources from Group
You can remove the added resources from the group.
Steps 1. Enter the Device Management module. 2. Click Device Management Group to enter the group management page.
All the added groups are displayed on the left. 3. Click a group to show the resources added to this group. 4. Select the resource(s) and click Delete to remove the resource(s) from the group.
7.4 Person Management You can add person information to the system for further operations such as access control, video intercom, time and attendance, etc. You can manage the added persons such as issuing cards to them in a batch, importing and exporting person information in a batch, etc.
7.4.1 Add Organization
You can add an organization and import person information to the organization for effective management of the persons. You can also add a surbodinate organization for the added one.
Steps 1. Enter Person module. 2. Select a parent organization in the left column and click Add in the upper-left corner to add an
organization. 3. Create a name for the added organization.
DS-K3G411 Series Tripod Turnstile User Manual
53
Note Up to 10 levels of organizations can be added.
4. Optional: Perform the following operation(s).
Edit Organization Hover the mouse on an added organization and click to edit its name.
Delete Organization
Hover the mouse on an added organization and click to delete it.
Note The lower-level organizations will be deleted as well if you delete an organization.
Make sure there is no person added under the organization, or the organization cannot be deleted.
Show Persons in Sub Organization
Check Show Persons in Sub Organization and select an organization to show persons in its sub organizations.
7.4.2 Configure Basic Information
You can add person to the client one by one and configure the person's basic information such as name, email, phone number, etc.
Steps 1. Enter Person module. 2. Select an organization in the organization list to add the person. 3. Click Add to open the adding person window.
The Person ID will be generated automatically. 4. Enter the basic information including person name, telephone number, email address, validity
period, etc.
DS-K3G411 Series Tripod Turnstile User Manual
54
Figure 7-2 Configure Basic Information
Note Once validity period expired, the credentials and access control settings of the person will be invalid and the person will have no authorization to access the doors\floors. You can click Extend to extend the person's validity period for 1 month, 3 months, 6 months, or 1 year.
5. Confirm to add the person. - Click Add to add the person and close the Add Person window. - Click Add and New to add the person and continue to add other persons.
7.4.3 Issue a Card by Local Mode
If a card enrollment station is available, you can issue a card by local mode. To read the card number, you should connect the card enrollment station to the PC running the client by USB interface or COM, and place the card on the card enrollment station.
Steps 1. Enter Person module. 2. Select an organization in the organization list to add the person and click Add to enter Add
Person panel.
Note Enter the person's basic information first. For details about configuring person's basic information, refer to Configure Basic Information .
3. In the Credential Card area, click +. 4. Click Settings to enter the Settings page.
DS-K3G411 Series Tripod Turnstile User Manual
55
5. Select Local as the card issuing mode.
Figure 7-3 Issue a Card by Local Mode 6. Set other related parameters.
Card Enrollment Station Select the model of the connected card enrollment station.
Note Currently, the supported card enrollment station models include DS-K1F100-D8, DS-K1F100- M, DS-K1F100-D8E, and DS-K1F180-D8E.
Card Type This field is only available when the model is DS-K1F100-D8E or DS-K1F180-D8E. Select the card type as EM card or Mifare card according to the actual card type.
DS-K3G411 Series Tripod Turnstile User Manual
56
Buzzing Enable or disable the buzzing when the card number is read successfully.
Card No. Type Select the type of the card number according to actual needs.
M1 Card Encryption This field is only available when the model is DS-K1F100-D8, DS-K1F100-D8E, or DS-K1F180- D8E. If the card is M1 card, then you can enable the M1 Card Encryption function and select the sector of the card to encrypt.
7. Click OK to confirm the operation. 8. Place the card on the card enrollment station, and click Read to get the card number.
The card number will display in the Card No. field automatically. 9. Click Add.
The card will be issued to the person.
7.4.4 Upload a Face Photo from Local PC
When adding person, you can upload a face photo stored in local PC to the client as the person's profile.
Steps 1. Enter Person module. 2. Select an organization in the organization list to add the person and click Add.
Note Enter the person's basic information first. For details about configuring person's basic information, refer to Configure Basic Information .
3. Click Add Face in the Basic Information panel. 4. Select Upload. 5. Select a picture from the PC running the client.
Note The picture should be in JPG or JPEG format and smaller than 200 KB.
6. Optional: Enable Verify by Device to check whether the facial recognition device managed in the client can recognize the face in the photo.
Note This function is hidden or shown according to the device capacity.
7. Confirm to add the person. - Click Add to add the person and close the Add Person window. - Click Add and New to add the person and continue to add other persons .
DS-K3G411 Series Tripod Turnstile User Manual
57
7.4.5 Take a Photo via Client
When adding a person, you can take a photo of the her/him via the client and set this photo as the person's profile.
Before You Start Make sure PC running the client has a camera or you have connected other USB camera to the PC.
Steps 1. Enter Person module. 2. Select an organization in the organization list to add the person and click Add to enter Add
Person window.
Note Enter the person's basic information first. For details, refer to Configure Basic Information .
3. Click Add Face in the Basic Information area. 4. Select Take Photo to enter Take Photo window. 5. Optional: Enable Verify by Device to check whether the captured face photo can meet the
uploading requirements.
Note This function is hidden or shown according to the device capacity.
6. Take a photo. 1) Face to the camera and make sure your face is in the middle of the collecting window. 2) Click to capture a face photo. 3) Optional: Click to capture again. 4) Click OK to save the captured photo.
DS-K3G411 Series Tripod Turnstile User Manual
58
Figure 7-4 Take a Photo via Client 7. Confirm to add the person. - Click Add to add the person and close the Add Person window. - Click Add and New to add the person and continue to add other persons.
7.4.6 Collect Face via Access Control Device
When adding person, you can collect the person's face via access control device added to the client which supports facial recognition function.
Steps 1. Enter Person module. 2. Select an organization in the organization list to add the person and click Add.
Note Enter the person's basic information first. For details about configuring person's basic information, refer to Configure Basic Information .
3. Click Add Face in the Basic Information panel. 4. Select Remote Collection. 5. Select an access control device which supports face recognition function from the drop-down
list. 6. Collect face.
DS-K3G411 Series Tripod Turnstile User Manual
59
1) Face to the camera of the selected access control device and make sure your face is in the middle of the collecting window.
2) Click to capture a photo. 3) Click OK to save the captured photo.
7. Confirm to add the person. - Click Add to add the person and close the Add Person window. - Click Add and New to add the person and continue to add other persons .
7.4.7 Collect Fingerprint via Client
Collecting fingerprints locally means you can collect the fingerprint via the fingerprint recorder connected directly to the PC running the client. The fingerprints recorded can be used as credentials of the persons to access the authorized doors.
Before You Start Connect the fingerprint recorder to the PC running the client.
Steps 1. Enter Person module. 2. Select an organization in the organization list to add the person and click Add.
Note Enter the person's basic information first. For details about configuring person's basic information, refer to Configure Basic Information .
3. In the Credential Fingerprint panel, click +. 4. In the pop-up window, select the collection mode as Local. 5. Select the model of the connected fingerprint recorder.
Note If the fingerprint recorder is DS-K1F800-F, you can click Settings to select the COM the fingerprint recorder connects to.
6. Collect the fingerprint. 1) Click Start. 2) Place and lift your fingerprint on the fingerprint recorder to collect the fingerprint. 3) Click Add to save the recorded fingerprint.
7. Confirm to add the person. - Click Add to add the person and close the Add Person window. - Click Add and New to add the person and continue to add other persons.
Note Once the fingerprint is added, the fingerprint type cannot be changed.
DS-K3G411 Series Tripod Turnstile User Manual
60
7.4.8 Configure Access Control Information
When adding a person, you can set her/his access control information, such as binding an access control group with the person, configuring PIN code, setting the person as a visitor, a blocklist person, or a super user, etc.
Steps 1. Enter Person module. 2. Select an organization in the organization list to add the person and click Add. 3. In the Access Control area, click to select access group(s) for the person.
Note For details, refer to Set Access Group to Assign Access Authorization to Persons .
Figure 7-5 Configure Access Control Information 4. Set a unique PIN code for the person which can be used for access authentication. - Manually enter a PIN code containing 4 to 8 digits.
Note Persons' PIN codes cannot be repeated.
- Click Generate to randomly generate an unrepeated PIN code of 6 digits.
Note If there are repeated PIN codes, a prompt will pop up on the client. The admin can generate a new PIN code to replace the repeated PIN code and notify related persons.
5. Check the person's operation permissions. Super User
If the person is set as a super user, he/she will have authorization to access all the doors/ floors and will be exempted from remaining closed restrictions, all anti-passback rules, and first person authorization.
DS-K3G411 Series Tripod Turnstile User Manual
61
Extended Door Open Time Use this function for persons with reduced mobility. When accessing the door, the person will have more time than others to pass through doors. For details about setting the door's open duration, refer to Configure Parameters for Door .
Add to Blocklist Add the person to the blocklist and when the person tries to access doors/floors, an event will be triggered and sent to the client to notify the security personnel.
Mark as Visitor If the person is a visitor, you should set the her/his valid times for visit.
Note The valid times for visit is between 1 and 100. You can also check No Limit, then there are no limited times for the visitor to access doors/floors.
Device Operator For person with device operator role, he/she is authorized to operate on the access control devices.
Note The Super User, Extended Door Open Time, Add to Blocklist, and Mark as Visitor functions cannot be enabled concurrently. For example, if one person is set as super user, you cannot enable extended door open time for her/him, add her/him to the blocklist, or set her/him as visitor.
6. Confirm to add the person. - Click Add to add the person and close the Add Person window. - Click Add and New to add the person and continue to add other persons.
7.4.9 Customize Person Information
You can customize the person properties which are not pre-defined in the client according to actual needs, e.g., place of birth. After customizing, when add a person, you can enter the custom information to make the person information complete.
Steps 1. Enter Person module. 2. Set the fields of custom information.
1) Click Custom Property. 2) Click Add to add a new property. 3) Enter the property name. 4) Click OK.
3. Set the custom information when adding a person. 1) Select an organization in the organization list to add the person and click Add.
DS-K3G411 Series Tripod Turnstile User Manual
62
Note Enter the person's basic information first. For details about configuring person's basic information, refer to Configure Basic Information .
2) In the Custom Information panel, enter the person information. 3) Click Add to add the person and close the Add Person window, or click Add and New to add
the person and continue to add other persons.
7.4.10 Configure Resident Information
If the person is resident, for video intercom purpose, you need to set the room number for her/him and bind an indoor station. After bound, you can call this person by calling the indoor station and perform video intercom with her/him.
Steps 1. Enter Person module. 2. Select an organization in the organization list to add the person and click Add.
Note Enter the person's basic information first. For details about configuring person's basic information, refer to Configure Basic Information .
3. In the Resident Information panel, select the indoor station to bind it to the person.
Note If you select Analog Indoor Station, the Door Station field will display and you are required to select the door station to communicate with the analog indoor station.
4. Enter the floor No. and room No. of the person. 5. Confirm to add the person. - Click Add to add the person and close the Add Person window. - Click Add and New to add the person and continue to add other persons.
7.4.11 Configure Additional Information
When adding person, you can configure the additional information for the person, such as person's identity type, identity No., country, etc., according to actual needs.
Steps 1. Enter Person module. 2. Select an organization in the organization list to add the person and click Add.
Note Enter the person's basic information first. For details about configuring person's basic information, refer to Configure Basic Information .
DS-K3G411 Series Tripod Turnstile User Manual
63
3. In the Additional Information panel, enter the additional information of the person, including person's ID type, ID No., job title, etc., according to actual needs.
4. Confirm to add the person. - Click Add to add the person and close the Add Person window. - Click Add and New to add the person and continue to add other persons .
7.4.12 Import and Export Person Identify Information
You can import the information and pictures of multiple persons to the client software in a batch. Meanwhile, you can also export the person information and pictures and save them in your PC.
7.4.13 Import Person Information
You can enter the information of multiple persons in a predefined template (a CSV file) to import the information to the client in a batch.
Steps 1. Enter the Person module. 2. Select an added organization in the list, or click Add in the upper-left corner to add an
organization and then select it. 3. Click Import to open the Import panel. 4. Select Person Information as the importing mode. 5. Click Download Template for Importing Person to download the template. 6. Enter the person information in the downloaded template.
Note If the person has multiple cards, separate the card No. with semicolon. Items with asterisk are required. By default, the Hire Date is the current date.
7. Click to select the CSV file with person information. 8. Click Import to start importing.
Note If a person No. already exists in the client's database, delete the existing information before importing.
You can import information of no more than 10,000 persons.
DS-K3G411 Series Tripod Turnstile User Manual
64
7.4.14 Import Person Pictures
After importing face pictures for the added persons to the client, the persons in the pictures can be identified by an added face recognition terminal. You can either import person pictures one by one, or import multiple pictures at a time according to your need.
Before You Start Be sure to have imported person information to the client beforehand.
Steps 1. Enter the Person module. 2. Select an added organization in the list, or click Add in the upper-left corner to add an
organization and then select it. 3. Click Import to open the Import panel and check Face. 4. Optional: Enable Verify by Device to check whether face recognition device managed in the
client can recognize the face in the photo. 5. Click to select a face picture file.
Note The (folder of) face pictures should be in ZIP format. Each picture file should be in JPG format and should be no larger than 200 KB. Each picture file should be named as "Person ID_Name". The Person ID should be the same
with that of the imported person information. 6. Click Import to start importing.
The importing progress and result will be displayed.
7.4.15 Export Person Information
You can export the added persons' information to local PC as a CSV file.
Before You Start Make sure you have added persons to an organization.
Steps 1. Enter the Person module. 2. Optional: Select an organization in the list.
Note All persons' information will be exported if you do not select any organization.
3. Click Export to open the Export panel and check Person Information as the content to export. 4. Check desired items to export. 5. Click Export to save the exported CSV file in your PC.
DS-K3G411 Series Tripod Turnstile User Manual
65
7.4.16 Export Person Pictures
You can export face picture file of the added persons and save in your PC.
Before You Start Make sure you have added persons and their face pictures to an organization.
Steps 1. Enter the Person module. 2. Optional: Select an organization in the list.
Note All persons' face pictures will be exported if you do not select any organization.
3. Click Export to open the Export panel and check Face as the content to export. 4. Click Export to start exporting.
Note The exported file is in ZIP format. The exported face picture is named as "Person ID_Name_0" ("0" is for a full-frontal face).
7.4.17 Get Person Information from Access Control Device
If the added access control device has been configured with person information (including person details, fingerprint, and issued card information), you can get the person information from the device and import them to the client for further operations.
Steps
Note If the person name stored in the device is empty, the person name will be filled with the issued
card No. after importing to the client. If the card number or person ID (employee ID) stored on the device already exists in the client
database, the person with this card number or person ID will not be imported to the client.
1. Enter Person module. 2. Select an organization to import the persons. 3. Click Get from Device. 4. Select the access control device from the drop-down list. 5. Click Get to start importing the person information to the client.
The person information, including person details, person's fingerprint information (if configured), and the linked cards (if configured), will be imported to the selected organization.
DS-K3G411 Series Tripod Turnstile User Manual
66
7.4.18 Move Persons to Another Organization
You can move the added persons to another organization if you need.
Before You Start Make sure you have added at least two organizations. Make sure you have imported person information.
Steps 1. Enter Person module. 2. Select an organization in the left panel.
The persons under the organization will be displayed in the right panel. 3. Select the person to move. 4. Click Change Organization. 5. Select the organization to move persons to. 6. Click OK.
7.4.19 Issue Cards to Persons in Batch
The client provides a convenient way to issue cards to multiple persons in a batch.
Steps 1. Enter Person module. 2. Click Batch Issue Cards.
All the added persons with no card issued will be displayed in the right panel. 3. Optional: Enter key words (name or person ID) in the input box to filter the person(s) that need
issuing cards. 4. Optional: Click Settings to set the card issuing parameters. For details, refer to . 5. Click Initialize to initialize the card enrollment station or card reader to make it ready for issuing
cards. 6. Click the Card No. column and enter the card number. - Place the card on the card enrollment station. - Swipe the card on the card reader. - Manually enter the card number and press the Enter key. The person(s) in the list will be issued with card(s).
7.4.20 Report Card Loss
If the person lost his/her card, you can report the card loss so that the card's related access authorization will be inactive.
Steps 1. Enter Person module.
DS-K3G411 Series Tripod Turnstile User Manual
67
2. Select the person you want to report card loss for and click Edit to open the Edit Person window. 3. In the Credential Card panel, click on the added card to set this card as lost card.
After reporting card loss, the access authorization of this card will be invalid and inactive. Other person who gets this card cannot access the doors by swiping this lost card.
4. Optional: If the lost card is found, you can click to cancel the loss. After cancelling card loss, the access authorization of the person will be valid and active.
5. If the lost card is added in one access group and the access group is applied to the device already, after reporting card loss or cancelling card loss, a window will pop up to notify you to apply the changes to the device. After applying to device, these changes can take effect on the device.
7.4.21 Set Card Issuing Parameters
The client provides two modes for reading a card's number: via card enrollment station or via the card reader of the access control device. If a card enrollment station is available, connect it to the PC running the client by USB interface or COM, and place the card on the card enrollment to read the card number. If not, you can also swipe the card on the card reader of the added access control device to get the card number. As a result, before issuing a card to one person, you need to set the card issuing parameters including the issuing mode and related parameters.
When adding a card to one person, click Settings to open the Card Issuing Settings window.
Local Mode: Issue Card by Card Enrollment Station Connect a card enrollment station to the PC running the client. You can place the card on the card enrollment station to get the card number. Card Enrollment Station
Select the model of the connected card enrollment station
Note Currently, the supported card enrollment station models include DS-K1F100-D8, DS-K1F100-M, DS-K1F100-D8E, and DS-K1F180-D8E.
Card Type This field is only available when the model is DS-K1F100-D8E or DS-K1F180-D8E. Select the card type as EM card or IC card according to the actual card type.
Serial Port It is only available when the model is DS-K1F100-M. Select the COM the card enrollment station connects to.
Buzzing Enable or disable the buzzing when the card number is read successfully.
Card No. Type
DS-K3G411 Series Tripod Turnstile User Manual
68
Select the type of the card number according to actual needs. M1 Card Encryption
This field is only available when the model is DS-K1F100-D8, DS-K1F100-D8E, or DS-K1F180-D8E. If the card is M1 card, and if you need to enable the M1 Card Encryption function, you should enable this function and select the sector of the card to encrypt.
Remote Mode: Issue Card by Card Reader Select an access control device added in the client and swipe the card on its card reader to read the card number.
7.5 Configure Schedule and Template You can configure the template including holiday and week schedule. After setting the template, you can adopt the configured template to access groups when setting the access groups, so that the access group will take effect in the time durations of the template.
Note For access group settings, refer to Set Access Group to Assign Access Authorization to Persons .
7.5.1 Add Holiday
You can create holidays and set the days in the holidays, including start date, end date, and holiday duration in one day.
Steps
Note You can add up to 64 holidays in the software system.
1. Click Access Control Schedule Holiday to enter the Holiday page. 2. Click Add on the left panel. 3. Create a name for the holiday. 4. Optional: Enter the descriptions or some notifications of this holiday in the Remark box. 5. Add a holiday period to the holiday list and configure the holiday duration.
Note Up to 16 holiday periods can be added to one holiday.
1) Click Add in the Holiday List field. 2) Drag the cursor to draw the time duration, which means in that duration of time, the
configured access group is activated.
DS-K3G411 Series Tripod Turnstile User Manual
69
Note Up to 8 time durations can be set to one holiday period.
3) Optional: Perform the following operations to edit the time durations. Move the cursor to the time duration and drag the time duration on the timeline bar to the
desired position when the cursor turns to . Click the time duration and directly edit the start/end time in the appeared dialog. Move the cursor to the start or the end of time duration and drag to lengthen or shorten
the time duration when the cursor turns to . 4) Optional: Select the time duration(s) that need to be deleted, and then click in the
Operation column to delete the selected time duration(s). 5) Optional: Click in the Operation column to clear all the time duration(s) in the time bar. 6) Optional: Click in the Operation column to delete this added holiday period from the
holiday list. 6. Click Save.
7.5.2 Add Template
Template includes week schedule and holiday. You can set week schedule and assign the time duration of access authorization for different person or group. You can also select the added holiday(s) for the template.
Steps
Note You can add up to 255 templates in the software system.
1. Click Access Control Schedule Template to enter the Template page.
Note There are two default templates: All-Day Authorized and All-Day Denied, and they cannot be edited or deleted. All-Day Authorized
The access authorization is valid in each day of the week and it has no holiday. All-Day Denied
The access authorization is invalid in each day of the week and it has no holiday.
2. Click Add on the left panel to create a new template. 3. Create a name for the template. 4. Enter the descriptions or some notification of this template in the Remark box. 5. Edit the week schedule to apply it to the template.
1) Click Week Schedule tab on the lower panel. 2) Select a day of the week and draw time duration(s) on the timeline bar.
DS-K3G411 Series Tripod Turnstile User Manual
70
Note Up to 8 time duration(s) can be set for each day in the week schedule.
3) Optional: Perform the following operations to edit the time durations. Move the cursor to the time duration and drag the time duration on the timeline bar to the
desired position when the cursor turns to . Click the time duration and directly edit the start/end time in the appeared dialog. Move the cursor to the start or the end of time duration and drag to lengthen or shorten
the time duration when the cursor turns to . 4) Repeat the two steps above to draw more time durations on the other days of the week.
6. Add a holiday to apply it to the template.
Note Up to 4 holidays can be added to one template.
1) Click Holiday tab. 2) Select a holiday in the left list and it will be added to the selected list on the right panel. 3) Optional: Click Add to add a new holiday.
Note For details about adding a holiday, refer to Add Holiday .
4) Optional: Select a selected holiday in the right list and click to remove the selected one, or click Clear to clear all the selected holiday(s) in the right list.
7. Click Save to save the settings and finish adding the template.
7.6 Set Access Group to Assign Access Authorization to Persons After adding the person and configuring the person's credentials, you can create the access groups to define which person(s) can get access to which door(s) and then apply the access group to the access control device to take effect.
Before You Start Add person to the client. Add access control device to the client and group access points. For details, refer to Group
Management . Add template.
Steps When the access group settings are changed, you need to apply the access groups to the devices again to take effect. The access group changes include changes of template, access group settings, person's access group settings, and related person details (including card number, fingerprint, face picture, linkage between card number and fingerprint, linkage between card number and fingerprint, card password, card effective period, etc).
DS-K3G411 Series Tripod Turnstile User Manual
71
1. Click Access Control Authorization Access Group to enter the Access Group interface. 2. Click Add to open the Add window. 3. In the Name text field, create a name for the access group as you want. 4. Select a template for the access group.
Note You should configure the template before access group settings. Refer to Configure Schedule and Template for details.
5. In the left list of the Select Person field, select person(s) to assign access authority. 6. In the left list of the Select Access Point field, select door(s), door station(s) or floor(s) for the
selected persons to access. 7. Click Save.
You can view the selected person(s) and the selected access point(s) on the right side of the interface.
Figure 7-6 Display the Selected Person(s) and Access Point(s) 8. After adding the access groups, you need to apply them to the access control device to take
effect. 1) Select the access group(s) to apply to the access control device. 2) Click Apply All to Devices start applying all the selected access group(s) to the access control
device or door station. 3) Click Apply All to Devices or Apply Changes to Devices.
Apply All to Devices
DS-K3G411 Series Tripod Turnstile User Manual
72
This operation will clear all the existed access groups of the selected devices and then apply the new access group to the device.
Apply Changes to Devices This operation will not clear the existed access groups of the selected devices and only apply the changed part of the selected access group(s) to the device(s).
4) View the applying status in the Status column or click Applying Status to view all the applied access group(s).
Note You can check Display Failure Only to filter the applying results.
The selected persons in the applied access groups will have the authorization to enter/exit the selected doors/door stations with their linked card(s) or fingerprints.
9. Optional: Click to edit the access group if necessary.
Note If you change the persons' access information or other related information, you will view the promptAccess Group to Be Applied on the right corner of the client. You can click the prompt to apply the changed data to the device. You can select either Apply Now or Apply Later.
Figure 7-7 Data Synchronization
7.7 Configure Advanced Functions You can configure the advanced functions of access control to meet some special requirements in different scene.
DS-K3G411 Series Tripod Turnstile User Manual
73
Note For the card related functions(the type of access control card), only the card(s) with access group
applied will be listed when adding cards. The advanced functions should be supported by the device. Hover the cursor on the Advanced Function, and then Click to customize the advanced function(s) to be displayed.
7.7.1 Configure Device Parameters
After adding the access control device, you can configure the parameters of access control device (access controller), access control points (door or floor), alarm inputs, alarm outputs, card readers and lane controller.
Configure Parameters for Access Control Device
After adding the access control device, you can configure its parameters.
Steps 1. Click Access Control Advanced Function Device Parameter .
Note If you can find Device Parameter in the Advanced Function list, Hover the cursor on the Advanced Function, and then Click to select the Device Parameter to be displayed.
2. Select an access device to show its parameters on the right page. 3. Turn the switch to ON to enable the corresponding functions.
Note The displayed parameters may vary for different access control devices.
RS-485 Communication Redundancy You should enable this function if you wire the RS-485 card reader to the access control device redundantly.
Enable NFC If enable the function, the device can recognize the NFC card. You can present NFC card on the device.
Enable M1 Card If enable the function, the device can recognize the M1 card. You can present M1 card on the device.
Enable EM Card
DS-K3G411 Series Tripod Turnstile User Manual
74
If enable the function, the device can recognize the EM card. You can present EM card on the device.
Enable CPU Card Reserved. If enable the function, the device can recognize the CPU card. You can present CPU card on the device.
Enable ID Card Reserved. If enable the function, the device can recognize the ID card. You can present ID card on the device.
4. Click OK. 5. Optional: Click Copy to, and then select the access control device(s) to copy the parameters in
the page to the selected device(s).
Configure Parameters for Door
After adding the access control device, you can configure its access point door parameters.
Steps 1. Click Access Control Advanced Function Device Parameter . 2. Select an access control device on the left panel, and then click to show the doors or floors of
the selected device. 3. Select a door or floor to show its parameters on the right page. 4. Edit the door or floor parameters.
Note s The displayed parameters may vary for different access control devices.
Name Edit the card reader name as desired.
Exit Button Type You can set the exit button as remaining closed or remaining open. Usually, it is remaining open.
Open Duration After swiping the normal card and relay action, the time for locking the door starts working.
Door Left Open Timeout Alarm The alarm can be triggered if the door has not been closed in a configured time period. If it is set as 0, no alarm will be triggered.
Super Password The specific person can open the door by inputting the super password.
DS-K3G411 Series Tripod Turnstile User Manual
75
5. Some of the following parameters are not listed in the Basic Information page, click Advanced to edit the parameters. Duress Code
The door can open by inputting the duress code when there is duress. At the same time, the client can report the duress event.
Dismiss Code Create a dismiss code which can be used to stop the buzzer of the card reader (by entering the dismiss code on the keypad).
Note The duress code, super code, and dismiss code should be different. The duress code, super password, and the dismiss code should be different from the authentication password.
The length of duress code, super password, and the dismiss code is according the device, usually it should contains 4 to 8 digits.
6. Click OK. 7. Optional: Click Copy to , and then select the door(s) to copy the parameters in the page to the
selected doors(s).
Note The door's status duration settings will be copied to the selected door(s) as well.
Configure Parameters for Card Reader
After adding the access control device, you can configure its card reader parameters.
Steps 1. Click Access Control Advanced Function Device Parameter . 2. In the device list on the left, click to expand the door, select a card reader and you can edit the
card reader's parameters on the right. 3. Edit the card reader basic parameters in the Basic Information page.
Note The displayed parameters may vary for different access control devices. There are part of parameters listed as follows. Refer to the user manual of the device for more details.
Name Edit the card reader name as desired.
Minimum Card Swiping Interval If the interval between card swiping of the same card is less than the set value, the card swiping is invalid. You can set it as 0 to 255.
DS-K3G411 Series Tripod Turnstile User Manual
76
Alarm of Max. Failed Attempts Enable to report alarm when the card reading attempts reach the set value.
Card Reader Type/Card Reader Description Get card reader type and description. They are read-only.
4. Optional: Some of the following parameters are not listed in the Basic Information page, click Advanced to edit the parameters. Enable Card Reader
If enabling the function, user can present card on the card reader. If disabling the function, the card reader for entrance cannot be used.
OK LED Polarity/Error LED Polarity/Buzzer Polarity Set OK LED Polarity/Error LED Polarity/Buzzer LED Polarity of main board according to the card reader parameters. Generally, adopts the default settings.
Buzzing Time Set the card reader buzzing time. The available time ranges from 0 to 5,999s. 0 represents continuous buzzing.
Max. Interval When Entering PWD When you inputting the password on the card reader, if the interval between pressing two digits is larger than the set value, the digits you pressed before will be cleared automatically.
Tampering Detection Enable the anti-tamper detection for the card reader.
Communicate with Controller Every When the access control device cannot connect with the card reader for longer than the set time, the card reader will turn offline automatically.
Fingerprint Recognition Level Select the fingerprint recognition level in the drop-down list.
5. Click OK. 6. Optional: Click Copy to, and then select the card reader(s) to copy the parameters in the page to
the selected card reader(s).
Configure Parameters for Alarm Output
After adding the access control device, if the device links to alarm outputs, you can configure the parameters.
Before You Start Add access control device to the client, and make sure the device supports alarm output.
Steps 1. Click Access Control Advanced Function Device Parameter to enter access control
parameter configuration page.
DS-K3G411 Series Tripod Turnstile User Manual
77
2. In the device list on the left, click to expand the door, select an alarm input and you can edit the alarm input's parameters on the right.
3. Set the alarm output parameters. Name
Edit the card reader name as desired. Alarm Output Active Time
How long the alarm output will last after triggered. 4. Click OK. 5. Optional: Set the switch on the upper right corner to ON to trigger the alarm output.
Configure Parameters for Lane Controller
After adding the lane controller to the client, you can configure its parameters for passing through the lane.
Steps 1. Click Access Control Advanced Function Device Parameter to enter Parameter Settings
page. 2. In the device list on the left, select a lane controller and you can edit the lane controller's
parameters on the right. 3. Edit the parameters.
Passing Mode Select the controller which will control the barrier status of the device. If you select According to DIP Settings, the device will follow the device's DIP settings to
control the barrier. The settings on the software will be invalid. If you select According to Door's Schedule Settings, the device will follow the schedule settings of the software to control the barrier. The DIP settings of the device will be invalid.
Audible Prompt Duration Set how long the audio will last, which is played when an alarm is triggered .
Note 0 refers to the alarm audio will be played until the alarm is ended.
Temperature Unit Select the temperature unit that displayed in the device status.
Lightboard Brightness Set the strip light brightness.
4. Click OK.
DS-K3G411 Series Tripod Turnstile User Manual
78
7.7.2 Configure Remaining Open/Closed
You can set the status of the door as open or closed. For example, you can set the door remaining closed in the holiday, and set the door remaining open in the specified period of the work day.
Before You Start Add the access control devices to the system.
Steps 1. Click Access Control Advanced Function Remain Open/Closed to enter the Remain Open/
Closed page. 2. Select the door that need to be configured on the left panel. 3. To set the door status during the work day, click the Week Schedule and perform the following
operations. 1) Click Remain Open or Remain Closed. 2) Drag the cursor to draw the time duration, which means in that duration of time, the
configured access group is activated.
Note Up to 8 time durations can be set to each day in the week schedule.
3) Optional: Perform the following operations to edit the time durations. Move the cursor to the time duration and drag the time duration on the timeline bar to the
desired position when the cursor turns to . Click the time duration and directly edit the start/end time in the appeared dialog. Move the cursor to the start or the end of time duration and drag to lengthen or shorten
the time duration when the cursor turns to . 4) Click Save. Related Operations
Copy to Whole Week
Select one duration on the time bar, click Copy to Whole Week to copy all the duration settings on this time bar to other week days.
Delete Selected Select one duration on the time bar, click Delete Selected to delete this duration.
Clear Click Clear to clear all the duration settings in the week schedule. 4. To set the door status during the holiday, click the Holiday and perform the following operations.
1) Click Remain Open or Remain Closed. 2) Click Add. 3) Enter the start date and end date. 4) Drag the cursor to draw the time duration, which means in that duration of time, the
configured access group is activated.
DS-K3G411 Series Tripod Turnstile User Manual
79
Note Up to 8 time durations can be set to one holiday period.
5) Perform the following operations to edit the time durations. Move the cursor to the time duration and drag the time duration on the timeline bar to the
desired position when the cursor turns to . Click the time duration and directly edit the start/end time in the appeared dialog. Move the cursor to the start or the end of time duration and drag to lengthen or shorten
the time duration when the cursor turns to . 6) Optional: Select the time duration(s) that need to be deleted, and then click in the
Operation column to delete the selected time duration(s). 7) Optional: Click in the Operation column to clear all the time duration(s) in the time bar. 8) Optional: Click in the Operation column to delete this added holiday period from the
holiday list. 9) Click Save.
5. Optional: Click Copy to to copy the door status settings of this door to other door(s).
7.7.3 Configure Multi-Factor Authentication
You can manage the persons by group and set the authentication for multiple persons of one access control point (door).
Before You Start Set access group and apply the access group to the access control device. For details, refer to Set Access Group to Assign Access Authorization to Persons . Perform this task when you want to set authentications for multiple cards of one access control point (door).
Steps 1. Click Access Control Advanced Function Multi-Factor Auth . 2. Select an access control device in device list on the left panel. 3. Add a person/card group for the access control device.
1) Click Add on the right panel. 2) Create a name for the group as desired. 3) Specify the start time and end time of the effective period for the person/card group. 4) Select members(s) and card(s) in the Available list, and the selected member(s) and card(s)
will be added to the Selected list.
Note Make sure you have issue card to the person. Make sure you have set access group and apply the access group to the access control device successfully.
5) Click Save.
DS-K3G411 Series Tripod Turnstile User Manual
80
6) Optional: Select the person/card group(s), and then click Delete to delete it(them). 7) Optional: Select the person/card group(s), and then click Apply to re-apply access group that
failed to be applied previously to the access control device. 4. Select an access control point (door) of selected device on the left panel. 5. Enter the maximum interval when entering password. 6. Add an authentication group for the selected access control point.
1) Click Add on the Authentication Groups panel. 2) Select a configured template as the authentication template from the drop-down list.
Note For setting the template, refer to Configure Schedule and Template .
3) Select the authentication type as Local Authentication, Local Authentication and Remotely Open Door, or Local Authentication and Super Password from the drop-down list. Local Authentication
Authentication by the access control device. Local Authentication and Remotely Open Door
Authentication by the access control device and by the client. When the person swipes the card on the device, a window will pop up. You can unlock the door via the client.
Figure 7-8 Remotely Open Door
Note You can check Offline Authentication to enable the super password authentication when the access control device is disconnected with the client.
Local Authentication and Super Password Authentication by the access control device and by the super password.
4) Select the added person/card group in the left list below and it will be added to the Selected list on the right as the authentication group.
DS-K3G411 Series Tripod Turnstile User Manual
81
5) Click the added authentication group in the right list to set authentication times in the Auth Times column.
Note The authentication times should be larger than 0 and smaller than the added personnel quantity in the personnel group.
The maximum value of authentication times is 16. 6) Click Save.
Note For each access control point (door), up to four authentication groups can be added. For the authentication group of which authentication type is Local Authentication, up to 8
person/card groups can be added to the authentication group. For the authentication group of which authentication type is Local Authentication and Super
Password or Local Authentication and Remotely Open Door, up to 7 person/card groups can be added to the authentication group.
7. Click Save.
7.7.4 Configure Custom Wiegand Rule
Based on the knowledge of uploading rule for the third party Wiegand, you can set multiple customized Wiegand rules to communicate between the device and the third party card readers.
Before You Start Wire the third party card readers to the device.
Steps
Note By default, the device disables the custom wiegand function. If the device enables the custom
Wiegand function, all wiegand interfaces in the device will use the customized wiegand protocol. Up to 5 custom Wiegands can be set. For details about the custom Wiegand, see Custom Wiegand Rule Descriptions.
1. Click Access Control Advanced Function Custom Wiegand to enter the Custom Wiegand page.
2. Select a custom Wiegand on the left. 3. Create a Wiegand name.
Note Up to 32 characters are allowed in the custom Wiegand name.
4. Click Select Device to select the access control device for setting the custom wiegand. 5. Set the parity mode according to the property of the third party card reader.
DS-K3G411 Series Tripod Turnstile User Manual
82
Note Up to 80 bits are allowed in the total length. The odd parity start bit, the odd parity length, the even parity start bit and the even parity
length range from 1 to 80 bit. The start bit of the card ID, the manufacturer code, the site code, and the OEM should range
from 1 to 80 bit. 6. Set output transformation rule.
1) Click Set Rule to open the Set Output Transformation Rules window.
Figure 7-9 Set Output Transformation Rule 2) Select rules on the left list.
The selected rules will be added to the right list. 3) Optional: Drag the rules to change the rule order. 4) Click OK. 5) In the Custom Wiegand tab, set the rule's start bit, length, and the decimal digit.
7. Click Save.
DS-K3G411 Series Tripod Turnstile User Manual
83
7.7.5 Configure Card Reader Authentication Mode and Schedule
You can set the passing rules for the card reader of the access control device according to your actual needs.
Steps 1. Click Access Control Advanced Function Authentication to enter the authentication mode
configuration page. 2. Select a card reader on the left to configure. 3. Set card reader authentication mode.
1) Click Configuration.
DS-K3G411 Series Tripod Turnstile User Manual
84
Figure 7-10 Select Card Reader Authentication Mode
Note PIN refers to the PIN code set to open the door. Refer to Configure Access Control Information .
2) Check the modes in the Available Mode list and they will be added to the selected modes list. 3) Click OK.
After selecting the modes, the selected modes will display as icons with different color. 4. Click the icon to select a card reader authentication mode, and drag the cursor to draw a color
bar on the schedule, which means in that period of time, the card reader authentication is valid. 5. Repeat the above step to set other time periods.
DS-K3G411 Series Tripod Turnstile User Manual
85
Figure 7-11 Set Authentication Modes for Card Readers 6. Optional: Select a configured day and click Copy to Week to copy the same settings to the whole
week. 7. Optional: Click Copy to to copy the settings to other card readers. 8. Click Save.
7.7.6 Configure First Person In
You can set multiple first persons for one access control point. After the first person is authorized, it allows multiple persons access the door or other authentication actions.
Before You Start Add access control device to the client, and make sure the device supports the first person in function.
Add person and assign access authorization to designed person. For details, refer to Person Management and Set Access Group to Assign Access Authorization to Persons .
Steps 1. Click Access Control Advanced Function First Person In to enter the First Person In page. 2. Select an access control device in the list on the left panel. 3. Select the current mode as Enable Remaining Open after First Person, Disable Remaining Open
after First Person, or Authorization by First Person from the drop-down list for each access control point of the selected device. Enable Remaining Open after First Person
DS-K3G411 Series Tripod Turnstile User Manual
86
The door remains open for the configured time duration after the first person is authorized until the remain open duration ends. If you select this mode, you should set the remain open duration.
Note The remain open duration should be between 0 and 1440 minutes. By default, the remain open duration is 10 minutes.
Disable Remaining Open after First Person Disable the function of first person in, namely normal authentication.
Authorization by First Person All authentications (except for the authentications of super card, super password, duress card, and duress code) are allowed only after the first person authorization.
Note You can authenticate by the first person again to disable the first person mode.
4. Click Add on the First Person List panel. 5. Select person(s) in the left list and the person(s) will be add to the selected persons as the first
person(s) of the doors. The added first person(s) will list in the First Person List
6. Optional: Select a first person from the list and click Delete to remove the person from the first person list.
7. Click Save.
7.7.7 Configure Anti-Passback
You can set to only pass the access control point according to the specified path and only one person could pass the access control point after swiping the card.
Before You Start Enable the anti-passing back function of the access control device. Perform this task when you want to configure the anti-passing back for the access control device.
Steps
Note Either the anti-passing back or multi-door interlocking function can be configured for an access control device at the same time. For the configuration of multi-door interlocking, refer to .
1. Click Access Control Advanced Function Anti-Passback to enter the Anti-Passpack Settings page.
2. Select an access control device on the left panel. 3. Select a card reader as the beginning of the path in the First Card Reader field.
DS-K3G411 Series Tripod Turnstile User Manual
87
4. Click of the selected first card reader in the Card Reader Afterward column to open the select card reader dialog.
5. Select the afterward card readers for the first card reader.
Note Up to four afterward card readers can be added as afterward card readers for one card reader.
6. Click OK in the dialog to save the selections. 7. Click Save in the Anti-Passback Settings page to save the settings and take effect.
Example Set Card Swiping Path If you select Reader In_01 as the beginning, and select Reader In_02, Reader Out_04 as the linked card readers. Then you can only get through the access control point by swiping the card in the order as Reader In_01, Reader In_02 and Reader Out_04.
7.7.8 Configure Device Parameters
After adding the access control device, you can set its parameters such as network parameters.
Set RS-485 Parameters
You can set the access control device's RS-485 parameters including the baud rate, data bit, the stop bit, parity type, flow control type, communication mode, work mode, and connection mode.
Steps
Note The RS-485 Settings should be supported by the device.
1. Enter the Access Control module. 2. On the navigation bar on the left, enter Advanced Function More Parameters . 3. Select an access control device in the device list and click RS-485 to enter the RS-485 Settings
page. 4. Select the serial port number from the drop-down list to set the RS-485 parameters. 5. Set the serial number, peripheral, authentication center, baud rate, data bit, the stop bit, parity
type, communication mode, working mode, and connection mode in the drop-down list. 6. Click Save.
The configured parameters will be applied to the device automatically. When you change the working mode or connection mode, the device will reboot automatically.
DS-K3G411 Series Tripod Turnstile User Manual
88
Enable M1 Card Encryption
M1 card encryption can improve the security level of authentication.
Steps
Note The function should be supported by the access control device and the card reader.
1. Enter the Access Control module. 2. On the navigation bar on the left, enter Advanced Function More Parameters . 3. Select an access control device in the device list and click M1 Card Encryption Verification to
enter the M1 Card Encryption Verification page. 4. Set the switch to on to enable the M1 card encryption function. 5. Set the sector ID.
Note The sector ID ranges from 1 to 100. By default, Sector 13 is encrypted. It is recommended to encrypt sector 13.
6. Click Save to save the settings.
7.8 Configure Linkage Actions for Access Control You can configure different linkage actions for the event detected by the access control device. After that, linkage actions will be triggered once the event happens. This mechanism is used for notifying the security personnel the event, or triggering automatic access control in real time.
Two types of linkage actions are supported: Client Actions: When the event is detected, it will trigger the actions on the client, such as the
client making an audible warning.. Device Actions: When the event is detected, it will trigger the actions of a specific device, such
as buzzing of a card reader and, opening/closing of a door, ..
7.8.1 Configure Client Actions for Access Event
Even if you are far away from an access point, you can still know what happens and how urgent the event is by configuring linked actions of access event on the client. You will be notified on the client once an event is triggered, so that you can response to the event instantly. You can also configure client actions of access points in a batch at a time.
DS-K3G411 Series Tripod Turnstile User Manual
89
Steps
Note The linkage actions here refer to the linkage of the client software's own actions such as audible warning, email linkage, etc.
1. Click Event Management Access Control Event . The added access control devices will display in the device list.
2. Select a resource (including device, alarm input, door/elevator, and card reader) from the device list. The event types which the selected resource supports will display.
3. Select the event(s) and click Edit Priority to define the priority for the event(s), which can be used to filter events in the Event Center.
4. Set the linkage actions of the event. 1) Select the event(s) and click Edit Linkage to set the client actions when the events triggered.
Audible Warning The client software gives an audible warning when alarm is triggered. You can select the alarm sound for audible warning.
Note For setting the alarm sound, please refer to Set Alarm Sound in the user manual of client software..
Send Email Send an email notification of the alarm information to one or more receivers. For details about setting email parameters, refer to Set Email Parameters in the user manual of client software..
2) Click OK. 5. Enable the event so that when the event is detected, en event will be sent to the client and the
linkage actions will be triggered. 6. Optional: Click Copy to... to copy the event settings to other access control device, alarm input,
door, or card reader.
7.8.2 Configure Device Actions for Access Event
You can set the access control device's linkage actions for the access control device's triggered event. After that, when an event is triggered, it can trigger the alarm output, buzzer on access controller, and other actions.
DS-K3G411 Series Tripod Turnstile User Manual
90
Steps
Note The linkage actions should be supported by the device.
1. Click Access Control Linkage Configuration . 2. Select the access control device from the list on the left. 3. Click Add to add a new linkage. 4. Select Event Linkage as the event source. 5. select the event type and detailed event to set the linkage. 6. In the Linkage Target area, set the property target to enable this action.
Buzzer on Controller The audible warning of access control device will be triggered.
Capture An event-related picture will be captured when the selected event happens.
Recording An event-related picture will be captured when the selected event happens.
Note The device should support recording.
Buzzer on Reader The audible warning of card reader will be triggered.
Alarm Output The alarm output will be triggered for notification when the selected event happens
Alarm Input Arm or disarm the alarm input.
Note The device should support alarm input function.
Access Point The door status of open, close, remain open, or remain close will be triggered.
Note The target door and the source door cannot be the same one.
Audio Play The audio prompt will be triggered. And the select audio index related audio content will be played according to the configured play mode.
7. Click Save.
DS-K3G411 Series Tripod Turnstile User Manual
91
8. Optional: After adding the device linkage, you can do one or more of the followings:
Edit Linkage Settings
Select the configured linkage settings in the device list and you can edit its event source parameters, including event source and linkage target.
Delete Linkage Settings
Select the configured linkage settings in the device list and click Delete to delete it.
7.8.3 Configure Device Actions for Card Swiping
You enable access control device's linkage actions (such as disarming a zone and triggering audio prompt) for the swiping of a specific card, In this way, you can monitor the card holder's behaviors and whereabouts.
Steps
Note It should be supported by the device.
1. Click Access Control Linkage Configuration . 2. Select the access control device from the list on the left. 3. Click Add to add a new linkage. 4. Select Card Linkage as the event source. 5. Enter the card number or select the card from the drop-down list. 6. Select the card reader where the card swipes. 7. In the Linkage Target area, set the property target to enable this action.
Buzzer on Controller The audible warning of access control device will be triggered.
Buzzer on Reader The audible warning of card reader will be triggered.
Capture An event-related picture will be captured when the selected event happens.
Recording An event-related picture will be captured when the selected event happens.
Note The device should support recording.
Alarm Output The alarm output will be triggered for notification.
Alarm Input Arm or disarm the alarm input.
DS-K3G411 Series Tripod Turnstile User Manual
92
Note The device should support alarm input function.
Access Point The door status of open, close, remain open, or remain closed will be triggered.
Audio Play The audio prompt will be triggered. And the select audio index related audio content will be played according to the configured play mode.
8. Click Save. When the card (configured in Step 5) swipes on the card reader (configured in Step 6), it can trigger the linked actions (configured in step 7).
9. Optional: After adding the device linkage, you can do one or more of the followings:
Delete Linkage Settings
Select the configured linkage settings in the device list and click Delete to delete it.
Edit Linkage Settings
Select the configured linkage settings in the device list and you can edit its event source parameters, including event source and linkage target.
7.9 Door Control In Monitoring module, you can view the real-time status of the doors managed by the added access control device. You can also control the doors such as open/close the door, or remain the door open/closed via the client remotely. The real-time access event are displayed in this module. You can view the access details and person details.
Note For the user with door control permission, the user can enter the Monitoring module and control the door. Or the icons used for control will not show. For setting the user permission, refer to Person Management .
7.9.1 Control Door Status
You can control the status for a single door, including opening door, closing door, remaining the door open, and remaining the door closed.
Steps 1. Click Monitoring to enter the status monitoring page. 2. Select an access point group on the upper-right corner.
DS-K3G411 Series Tripod Turnstile User Manual
93
Note For managing the access point group, refer to Group Management in the user manual of the client software.
The doors in the selected access control group will display. 3. Click a door icon to select a door, or press Ctrl and select multiple doors. 4. Click the following buttons to control the door.
Open Door When the door is locked, unlock it and it will be open for once. After the open duration, the door will be closed and locked again automatically.
Close Door When the door is unlocked, lock it and it will be closed. The person who has the access authorization can access the door with credentials.
Remain Open The door will be unlocked (no matter closed or open). All the persons can access the door with no credentials required.
Remain Closed The door will be closed and locked. No person can access the door even if he/she has the authorized credentials, except the super users.
Capture Capture a picture manually.
Note The Capture button is available when the device supports capture function. The picture is saved in the PC running the client. For setting the saving path, refer to Set File Saving Path in the user manual of the client software.
Result
The icon of the doors will change in real-time according to the operation if the operation is succeeded.
7.9.2 Check Real-Time Access Records
The real-time access records can be displayed in the client, including card swiping records, face recognition records, skin-surface temperature information, etc. Also, you can view the person information and view the picture captured during access.
Before You Start You have added person(s) and access control device(s) to the client. For details, refer to Person Management and Add Device .
DS-K3G411 Series Tripod Turnstile User Manual
94
Steps 1. Click Monitoring to enter monitoring module.
Real-time access records are displayed on the bottom of the page. You can view record details, including card No., person name, event time, door location, temperature, authentication type etc.
Figure 7-12 Real-time Access Records
Note You can right click the column name of access event table to show or hide the column according to actual needs.
2. Optional: Select an access point group from the drop-down list in the upper-right corner to show the real time access records of the selected group.
3. Optional: Check the event type and event status. The detected events of checked type and status will be displayed in the list below.
4. Optional: Check Show Latest Event to view the latest access record. The record list will be listed reverse chronologically.
5. Optional: Check Enable Abnormal Temperature Prompt to enable abnormal skin-surface temperature prompt.
Note When enabled, if there is abnormal temperature information, an Abnormal Temperature window pops up when you enter Monitoring module, displaying person's picture, skin-surface temperature, card No., person name, etc.
6. Optional: Click an event to view person pictures (including captured picture and profile).
Note In Linked Capture Picture field, you can double click the captured picture to view an enlarged picture.
7. Optional: Click to view details (including person's detailed information and the captured picture).
DS-K3G411 Series Tripod Turnstile User Manual
95
Note In the pop-up window, you can click to view details in full screen.
7.10 Event Center The event information (for example, device offline) received by the client displays. In the Event Center, you can check the detailed information of the real-time and historical events, view the event linked video, handle the events, and so on.
Before the client can receive the event information from the device, you need to enable the events of the resource and arm the device first. For details, refer to Enable Receiving Event from Devices .
7.10.1 Enable Receiving Event from Devices
Before the client software can receive event notifications from the device, you need to arm the device first.
Steps 1. Click Tool Device Arming Control to open Device Arming Control page.
All the added devices appear on this page. 2. In the Auto-Arming column, turn on the switch to enable auto-arming.
Figure 7-13 Arm Device
After turned on, the device(s) will be armed. And notifications about the events triggered by the armed device(s) will be automatically sent to the client software in real-time.
DS-K3G411 Series Tripod Turnstile User Manual
96
7.10.2 View Real-Time Events
The real-time event information received by the client of the connected resources are displayed. You can check the real-time event information, including event source, event time, priority, etc.
Before You Start Enable receiving events from devices before the client can receive event from the device, see Enable Receiving Event from Devices for details.
Steps 1. Click Event Center Real-time Event to enter the real-time event page and you can view the
real-time events received by the client. Event Time
For encoding device, event time is the client time when it receives the event. For other device types, event time is the time when the event is triggered.
Priority Priority represents the emergency degree of the event.
2. Filter the events.
Filter by Device Type and (or) Priority
Select device type(s) and (or) priorities to filter events.
Filter by Keywords Enter the keywords to filter the events. 3. Optional: Right-click the table header of the event list to customize the event related items to be
displayed in the event list. 4. Select an event in the event list to view the event details. 5. Optional: Perform the following operations if necessary.
Handle Single Event Click Handle to enter the processing suggestion, and then click OK.
Note After an event is handled, the Handle button will become Add Remark. Click Add Remark to add more remarks for this handled event.
Handle Events in a Batch
Select events that need to be processed, and then click Handle in Batch. Enter the processing suggestion, and then click OK.
Enable/Disable Alarm Audio
Click Audio On/Mute to enable/disable the audio of the event.
Select the Latest Event Automatically
Check Auto-Select Latest Event to select the latest event automatically and the event information details is displayed.
Clear Events Click Clear to clear the all the events in the event list.
DS-K3G411 Series Tripod Turnstile User Manual
97
Send Email Select an event and then click Send Email, and the information details of this event will be sent by email.
Note You should configure the email parameters first, see for details.
Auto-Play Video Check Auto-Play Video to automatically play video when displaying event details.
Enlarge Video or Picture
Double click the video image to view video in a larger window. Put the cursor on the picture, and click to view picture in a
larger window.
Download Captured Picture
Hover the cursor on the captured picture, and click the download icon on the lower right corner of the picture to download it to the local PC.
Download Event Triggered Video
Hover the cursor on the recorded video, click to download the video (30s before the event happens) triggered by the event.
7.10.3 Search Historical Events
In the Event Search module of the event center page, you can search the historical events via time, device type, and other conditions according to the specified device type, and then process the events.
Before You Start Enable receiving events from devices before the client can receive event information from the device,see Enable Receiving Event from Devices for details.
Steps 1. Click Event Center Event Search to enter the event search page. 2. Set the filter conditions to display the required events only.
Time The time when the event starts.
Search by Device
Search the events by device or the device's resource channels. If searched by device, you need to set the followings: Include Sub-Node: Search the events of the device and all resource channels. Device Type: The device type which events you want to search.
Group
DS-K3G411 Series Tripod Turnstile User Manual
98
Search the events by resource channels in the group.
Note For video intercom device, you need to select searching scope: All and Locking Log. For access control device, you can click Show More to set more conditions: status, event
type, card reader type, person name, card No., and organization.
Priority The priority including low, medium, high and uncategorized which indicates the emergency degree of the event.
Status The handling status of the event.
3. Click Search to search the events according the conditions you set. 4. Optional: Right-click the table header of the event list to customize the event related items to be
displayed in the event list.
Figure 7-14 Customize Event Related Items to Display 5. Optional: Perform one of the following operations.
Handle a Single Event
Handle single event: Select one event that need to be processed, and then click Handle in the event information details page, and enter the processing suggestion.
Note After an event is handled, the Handle button will become Add Remark, click Add Remark to add more remarks for this handled event.
Batch Handle Events
Handle events in a batch: Select the events which need to be processed, and then click Handle in Batch, and enter the processing suggestion.
DS-K3G411 Series Tripod Turnstile User Manual
99
Note After an event is handled, the Handle button will become Add Remark, click Add Remark to add more remarks for this handled event.
Send Email Select an event and then click Send Email, and the information details of this event will be sent by email.
Note You should configure the email parameters first, see for details.
Export Event Information
Click Export to export the event log or event pictures to the local PC in CSV format. You can set the saving path manually.
Download Event Related Picture
Hover the cursor on the related picture, and then click the download icon on the upper-right corner of the picture to download it to the local PC. You can set the saving path manually.
7.11 Remote Configuration via Client Software Configure device parameters remotely.
7.11.1 Check Device Information
Steps 1. Click Maintenance and Management Device Management Device to enter the device list. 2. Click to enter the remote configuration page. 3. Click System Device Information and view the device basic information and the device
version information.
7.11.2 Edit Device Name
Click Maintenance and Management Device Management Device to enter the device list. Click to enter the remote configuration page. Click System General to configure the device name and overwrite record files parameter. Click Save.
7.11.3 Edit Time
Steps 1. Click Maintenance and Management Device Management Device to enter the device list.
DS-K3G411 Series Tripod Turnstile User Manual
100
2. Click to enter the remote configuration page. 3. Click System Time to configure the time zone. 4. Optional: Check Enable NTP and set the NTP server address, the NTP port, and the
synchronization interval. 5. Optional: Check Enable DST and set the DST start time, end time and the bias. 6. Click Save.
7.11.4 Set System Maintenance
You can reboot the device remotely, restore the device to default settings, etc.
Steps 1. Click Maintenance and Management Device Management Device to enter the device list. 2. Click to enter the remote configuration page. 3. Click System System Maintenance . 4. Maintain the device.
Reboot The device starts rebooting.
Restore Default Settings Restore the device settings to the default ones, excluding the IP address.
Restore All Restore the device parameters to the default ones. The device should be activated after restoring.
5. Remotely upgrade the device. 1) In the Remote Upgrade part, select an upgrade type.
Note You need to set the device ID before upgrading if you select Controller Upgrade File as the
remote upgrade type. Only the card reader that connected via RS-485 protocol supports upgrading.
2) Click ... to select an upgrade file. 3) Click Upgrade to start upgrading.
Note Do not power off during the upgrading.
7.11.5 Manage Network User
Steps 1. Click Maintenance and Management Device Management Device to enter the device list. 2. Click to enter the remote configuration page.
DS-K3G411 Series Tripod Turnstile User Manual
101
3. Click System User Network User . 4. Click Add to add the user. 5. Optional: Select a user in the user list and click Edit to edit the user.
You are able to edit the user password, the IP address, the MAC address and the user permission.
6. Click OK.
7.11.6 Manage Keyfob User
Steps 1. Click Maintenance and Management Device Management Device to enter the device list. 2. Click to enter the remote configuration page. 3. Click System User Keyfob User . 4. Click Add to add the user. 5. Check Enable in the pop-up window and set the keyfob's serial No. 6. Optional: Enable the Remain Open Status of the turnstile.
Note If enabling this function, after the keyfob is matching completed, you can set the barrier as remaining open by using the keyfob.
7. Set the door open direction 8. Click OK.
Note Up to 32 keyfob users can be added.
7.11.7 Set Security
Steps 1. Click Maintenance and Management Device Management Device to enter the device list. 2. Click to enter the remote configuration page. 3. Click System Security . 4. Select the density level in the drop-down list. 5. You can select Compatible Mode or Security Mode.
Compatible Mode The user information verification is compatible with the old client software version when logging in.
Security Mode High security level during the user information verification when logging in.
6. Click Save.
DS-K3G411 Series Tripod Turnstile User Manual
102
7.11.8 Configure Screen Parameters
The device can connect to a text screen. You can set the display parameters on this page.
Steps 1. Click Maintenance and Management Device Management Device to enter the device list. 2. Click to enter the remote configuration page. 3. Click System Screen Configuration . 4. Set the screen parameters.
Note For better performance, it is suggested to use the default parameters.
Screen Position Select the screen's position on the device. If select Exit from the drop-down list, the screen will be installed at the exit position of the device.
Screen Model Select the screen model from the drop-down list.
Font Size Select the text font size in the screen.
Screen Orientation Select the text orientation on the screen.
Line Space Set the space between two lines.
Column Spacing Set the space between two columns.
Initial Position Set the first character's position displayed on the screen.
5. Click Save.
7.11.9 Configure Screen Parameters
You can set the people countings parameters and after the configuration
Steps 1. Click Maintenance and Management Device to enter the device list. 2. Click to enter the remote configuration page. 3. Click System People Counting . 4. Set the people counting parameters.
Clear Counted Number
DS-K3G411 Series Tripod Turnstile User Manual
103
Click Clear and the counted people number will be restored to zero. Device People Counting
Click Enable or Disable to enable or disable the people counting function. Offline People Counting
Click Enable or Disable to enable or disable function of the offline people counting on the client. If enabling the function and if the device is offline, the device will continue counting the people and the number will be stored in the device. When the device is online, the client will read the updated number from the device automatically.
People Counting Type You can select from Invalid, By IR Detection, and By Authentication Number. None
The device will not count people. If the device people counting function is enabled, the people counting function is still disabled.
By IR Detection The device will count the people who passing through the device depending on the IR detection.
By Authentication Number The device will count the people who authenticating on the device. The failed authentication will also count as once.
5. Click Save.
7.11.10 Configure Advanced Network
Click Maintenance and Management Device Management Device to enter the device list. Click to enter the remote configuration page. Click Network Advanced Settings and you can configure the DNS IP address 1 and the DNS IP address. Click Save to save the settings.
7.11.11 Configure Audio File
You can relate the audio file to the corresponding playing scene. You can also export the audio file from the system and import the audio file from the local.
Steps 1. Click Maintenance and Management Device Management Device to enter the device list. 2. Click to enter the remote configuration page. 3. Click Other Audio File .
DS-K3G411 Series Tripod Turnstile User Manual
104
Note By default, the system contains the audio content. For details about the index related audio content, see Table of Audio Index Related Content .
4. Select the index (the playing content) corresponded play scene. 5. Optional: Input the descriptions of the play scene. 6. Click Save Parameters to save the relationship between the index (the playing content) and the
play scene. 7. Optional: Click Export to export the default audio file to the local computer. 8. Optional: Click ... and select audio file from the local computer. Click Import to import the file to
the device.
Note The imported audio file should be in MEM format. For details about converting other format of the audio file to MEM format, see the audio
conversion manual. If you use the third part software to create or edit an audio file, the volume of the audio file
should be no less than 0 68. If the volume is less than the value, it will exceed the loudspeaker's power consumption, so that damage the loudspeaker.
7.11.12 View Relay Status
Click Maintenance and Management Device Management Device to enter the device list. Click to enter the remote configuration page. Click Status Relay and you can view the relay status.
DS-K3G411 Series Tripod Turnstile User Manual
105
Appendix A. Tips When Collecting/Comparing Face Picture
The position when collecting or comparing face picture is as below:
Expression Keep your expression naturally when collecting or comparing face pictures, just like the
expression in the picture below.
Do not wear hat, sunglasses, or other accessories that can affect the facial recognition function. Do not make your hair cover your eyes, ears, etc. and heavy makeup is not allowed.
Posture In order to get a good quality and accurate face picture, position your face looking at the camera when collecting or comparing face pictures.
Size Make sure your face is in the middle of the collecting window.
DS-K3G411 Series Tripod Turnstile User Manual
106
Appendix B. Tips for Scanning Fingerprint
Recommended Finger Forefinger, middle finger or the third finger.
Correct Scanning The figure displayed below is the correct way to scan your finger:
You should press your finger on the scanner horizontally. The center of your scanned finger should align with the scanner center.
Incorrect Scanning The figures of scanning fingerprint displayed below are incorrect:
DS-K3G411 Series Tripod Turnstile User Manual
107
Environment The scanner should avoid direct sun light, high temperature, humid conditions and rain. When it is dry, the scanner may not recognize your fingerprint successfully. You can blow your finger and scan again.
Others If your fingerprint is shallow, or it is hard to scan your fingerprint, we recommend you to use other authentication methods. If you have injuries on the scanned finger, the scanner may not recognize. You can change another finger and try again.
DS-K3G411 Series Tripod Turnstile User Manual
108
Appendix C. DIP Switch Description
The DIP switch is on the access control board. No.1 to No 8 is from the low bit to the high bit.
When the switch is towards ON, it means the switch is enabled, otherwise, the switch is off. If you set the DIP switch like the figure displayed below, its binary value is 00001100, and its decimal value is 12.
DS-K3G411 Series Tripod Turnstile User Manual
109
Appendix D. Event and Alarm Type
Event Alarm Type
Passing Timeout None
DS-K3G411 Series Tripod Turnstile User Manual
110
Appendix E. Table of Audio Index Related Content
Index Content
1 Authenticated.
2 Card No. does not exist.
3 Card No. and fingerprint mismatch.
4 Passing timeout.
5 No permissions.
6 Authentication time out.
7 Authentication failed.
8 Expired card.
DS-K3G411 Series Tripod Turnstile User Manual
111
Appendix F. Communication Matrix and Device Command
Communication Matrix Scan the following QR code to get the device communication matrix. Note that the matrix contains all communication ports of Hikvision access control and video intercom devices.
Figure F-1 QR Code of Communication Matrix
Device Command Scan the following QR code to get the device common serial port commands. Note that the command list contains all commonly used serial ports commands for all Hikvision access control and video intercom devices.
Figure F-2 Device Command
DS-K3G411 Series Tripod Turnstile User Manual
112
Related manuals for Hikvision DS-K3G411 Turnstile User's Manual
Manualsnet FAQs
If you want to find out how the DS-K3G411 Hikvision works, you can view and download the Hikvision DS-K3G411 Turnstile User's Manual on the Manualsnet website.
Yes, we have the User's Manual for Hikvision DS-K3G411 as well as other Hikvision manuals. All you need to do is to use our search bar and find the user manual that you are looking for.
The User's Manual should include all the details that are needed to use a Hikvision DS-K3G411. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.
The best way to navigate the Hikvision DS-K3G411 Turnstile User's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.
This Hikvision DS-K3G411 Turnstile User's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.
You can download Hikvision DS-K3G411 Turnstile User's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.
To be able to print Hikvision DS-K3G411 Turnstile User's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Hikvision DS-K3G411 Turnstile User's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.