Hikvision AE-AC1130-A Terminal User's Manual PDF

1 of 39
1 of 39

Summary of Content for Hikvision AE-AC1130-A Terminal User's Manual PDF

0

Intelligent Driving Assistance Terminal

User Manual

Intelligent Driving Assistance Terminal User Manual

I

Legal Information

2022 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.

About this Manual

The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information

hereinafter are for description and explanation only. The information contained in the Manual is subject to change,

without notice, due to firmware updates or other reasons. Please find the latest version of this Manual at the Hikvision

website (https://www.hikvision.com/).

Please use this Manual with the guidance and assistance of professionals trained in supporting the Product.

Trademarks

and other Hikvisions trademarks and logos are the properties of Hikvision in various jurisdictions.

Other trademarks and logos mentioned are the properties of their respective owners.

Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS

HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED AS IS AND WITH ALL FAULTS AND ERRORS. HIKVISION

MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY

QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO

EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,

INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA,

CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT

(INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT,

EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.

YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION

SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES

RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER,

HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.

YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE

FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING

THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT

LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY

RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR

PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR

BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR

FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATTER PREVAILS.

Intelligent Driving Assistance Terminal User Manual

I

Regulatory Information

FCC Information

Please take attention that changes or modification not expressly approved by the party responsible

for compliance could void the users authority to operate the equipment.

FCC Compliance

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which

case the user will be required to correct the interference at his own expense.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause

undesired operation.

EU Conformity Statement

This product and - if applicable - the supplied accessories too are marked with "CE" and

comply therefore with the applicable harmonized European standards listed under the

EMC Directive 2014/30/EU, the LVD Directive 2014/35/EU, the RoHS Directive 2011/65/EU.

2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as

unsorted municipal waste in the European Union. For proper recycling, return this product

to your local supplier upon the purchase of equivalent new equipment, or dispose of it at

designated collection points. For more information see: www.recyclethis.info

2006/66/EC (battery directive): This product contains a battery that cannot be disposed

of as unsorted municipal waste in the European Union. See the product documentation

for specific battery information. The battery is marked with this symbol, which may include

lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the

battery to your supplier or to a designated collection point. For more information see: www.recyclethis.info

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.

Intelligent Driving Assistance Terminal User Manual

II

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Safety Instructions

Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user.

In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation and region. Please refer to technical specifications for detailed information.

Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power Source with 100 to 240 VAC or 12 VDC according to the IEC60950-1 standard. Please refer to technical specifications for detailed information.

Do not connect several devices to one power adapter as adapter overload may cause over- heating or a fire hazard.

Please make sure that the plug is firmly connected to the power socket.

If smoke, odor or noise rise from the device, turn off the power at once and unplug the power cable, and then please contact the service center.

Symbol Description

Provides additional information to emphasize or supplement important points of the main text.

Indicates a potentially hazardous situation, which if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results.

Indicates a hazard with a high level of risk, which if not avoided, will result in death or serious injury.

Intelligent Driving Assistance Terminal User Manual

III

TABLE OF CONTENTS Chapter 1 Introduction ................................................................................................................... 1

Product Overview .......................................................................................................................................... 1

Key Feature.................................................................................................................................................... 1

1.2.1 Abnormal Detection ............................................................................................................................ 1

1.2.2 ADAS ................................................................................................................................................... 2

1.2.3 BSD ..................................................................................................................................................... 4

Chapter 2 Packing List and Appearance.......................................................................................... 5

Packing List .................................................................................................................................................... 5

Front Panel .................................................................................................................................................... 5

Rear Panel ..................................................................................................................................................... 6

Chapter 3 Installation ..................................................................................................................... 8

Preparation .................................................................................................................................................... 8

3.1.1 Installation Environment ..................................................................................................................... 8

3.1.2 Installation Safety Instructions ............................................................................................................. 9

3.1.3 Tools for Installation ............................................................................................................................ 9

Device Installation.......................................................................................................................................... 9

3.2.1 Insert SIM Card and SD Card ................................................................................................................ 9

3.2.2 Fix the Device .....................................................................................................................................10

3.2.3 Install Antenna ...................................................................................................................................10

Chapter 4 Wiring .......................................................................................................................... 12

I/O Wiring .....................................................................................................................................................12

Power Wiring ................................................................................................................................................12

Power Up and Check Device ..........................................................................................................................13

Chapter 5 APP Operation ............................................................................................................. 15

Install the Calibration App .............................................................................................................................15

ADAS Calibration ...........................................................................................................................................16

5.2.2 Calibration Pole Method .....................................................................................................................18

5.2.3 Disappearance Line Method ...............................................................................................................19

Abnormal Detection and BSD Camera Parameters .........................................................................................20

5.3.1 Configure Parameters for Abnormal Detection Camera .......................................................................20

5.3.2 Configure Parameters of BSD Camera .................................................................................................22

IPC Support ...................................................................................................................................................27

5.4.1 Add IPC ..............................................................................................................................................27

5.4.2 Delete IPC ..........................................................................................................................................28

Device Calibration .........................................................................................................................................31

5.5.1 Format the Storage.............................................................................................................................31

5.5.2 Configure the Platform Parameters ....................................................................................................31

5.5.3 Update the Device by SD Card ............................................................................................................32

5.5.4 Display Output Configuration..............................................................................................................33

Intelligent Driving Assistance Terminal User Manual

1

Chapter 1 Introduction

Product Overview

Intelligent driving assistance terminal (abbreviated as intelligent terminal) integrates forward car leaving detection, abnormal detection, and right side blind spot vehicle discern system (optional). Based on the deep-learning algorithm, the device can precisely warn against various kinds of situations with timely video and audio warning to inform the driver of the potential danger and to drive in a safer way.

Due to its unique features, this intelligent terminal adapts to most weather conditions and can be widely deployed on commercial vehicles, such as bus, truck, industrial vehicle, and vehicle carrying dangerous chemicals.

Key Feature

The device supports various kinds of event-triggered detection. When an event occurs, it can release warning sound, capture and record relevant event. The device also supports exporting images and recordings by SD card for accident investigation.

You need to set warning parameter, capture, and recording function of device with dedicated app.

The device only serves as driving assistance system to improve driving safety and you cannot solely rely on the device for driving. Drivers should be responsible for driving safety.

The prerequisite of uploading to the platform is that the terminal should support 3G/4G dial and can connect to the platform.

Abnormal Detection can detect risky driving behaviors and trigger alarm.

Fatigued Driving Detection Warning

When detecting driver dozing off during driving, the device triggers audio alarm.

Sight Detection Warning

When the driver does not focus on the road and display unsafe behaviors such as tilting head down to look at the phone, glancing around or looking into mirror and doing makeup during driving, the device triggers audio alarm.

Smoking Detection Warning

When the driver smokes during driving, the device triggers audio alarm.

Phone Call Detection Warning

When the driver answers the phone during driving, the device triggers audio alarm.

Intelligent Driving Assistance Terminal User Manual

2

Seatbelt Not Fasten Detection Warning

When the seatbelt of the driver is not fasten, the device triggers audio alarm.

IR Interrupting Sunglasses Detection

When the driver puts on the sunglass that interrupts the infrared for a period of time, the device triggers audio alarm, for this would tamper the function of the Abnormal Detection.

ADAS (Advanced Driving Assistance System) can detect driving environment, warn against potential danger, and upload the corresponding information to the platform.

ADAS Warning Type Description

Event Prerequisite Warning No Warning

Forward Collision Warning (FCW)

The vehicle speed is between 0 and 120 km/h and FCW is enabled (triggered).

I degree alarm is triggered when the speed is within 30 km/h to 50 km/h.

II degree alarm o is triggered when the speed is over 50 km/h.

When your vehicle drives faster than the front vehicle where collision may occur, the terminal will release warning.

The warning will be released no earlier than 4 s.

Bad weather with low visibility, such as heavy fog and heavy rain.

Vehicles with special shapes.

The vehicle speed is lower than 30 km/h or the set value.

FCW is disabled.

Intelligent Driving Assistance Terminal User Manual

3

Lane Departure Warning (LDW)

The vehicle speed is higher than 30 km/h and HMW is enabled.

I degree alarm is triggered when the speed is within 30 km/h to 50 km/h.

II degree alarm o is triggered when the speed is over 50 km/h.

When the vehicle is deviating from the lane, the terminal will release warning.

Turning signal is on when the vehicle is changing lane or hazard warning lamps are on.

There is no lane line on the road or the lane line is not clear.

The vehicle speed is lower than 30 km/h or the set value...

Bad weather with low visibility, such as heavy fog and heavy rain.

LDW is disabled.

Headway Monitoring Warning (HMW)

The vehicle speed is higher than 30 km/h and HMW is enabled.

I degree alarm is triggered when the speed is within 30 km/h to 50 km/h.

II degree alarm o is triggered when the speed is over 50 km/h.

When TDC (Time to Collision) is shorter than 0.8 s, the terminal will release warning.

When TDC (Time to Collision) is less than both 0.8 s and the set value, the terminal will not release warning repeatedly until the interval is 1.5 times larger than the set value. HWM will refresh automatically and upload warning information to the platform.

The vehicle speed is lower than 30 km/h or the set value.

Bad weather with low visibility, such as heavy fog and heavy rain.

HMW is disabled.

Intelligent Driving Assistance Terminal User Manual

4

Pedestrian Collision Warning (PCW)

The vehicle speed is between 1 km/h and 50 km/h and PCW is enabled (triggered).

I degree alarm is triggered when the speed is under 20 km/h.

II degree alarm o is triggered when the speed is within 20 km/h to 50 km/h.

When there is potential collision risk, the device will release warning.

Night with low visibility.

Pedestrian is shorter than 0.8 m (2.6 ft.).

Bad weather with low visibility, such as heavy fog and heavy rain.

The vehicle speed is higher than 50 km/h or the set value.

PCW is disabled.

Sharp Turn Warning

- When the sharp turn behavior occurs during driving, the device will release warning.

-

Right Side Blind spot vehicle Discern System (R- BSD) (Optional)

When the vehicle speed is lower than 30 km/h and R-BSD is enabled (triggered).

When motor vehicle, non- motor vehicle, or pedestrians are detected among the right side blind spot of the vehicle, the intelligent will release warning.

Incorrect blind spot settings.

Camera image error.

BSD is disabled.

BSD (Blind Spot Detection) can trigger high frequency voice or light alarm when it detects vehicles, pedestrians, bicycles and tricycles that enter the right side blind spot of the truck or bus. The alarm will stop when these objects leave the alarm zone.

Filter the non-attended zone warning

BSD will not alarm for the object that is in the traffic island, bus station, crossing road, and green belt.

Send alarm based on the tendency of movement of the object vehicle

BSD will send alarm when the object vehicle move in the same direction of the current vehicle and tends to over take.

Intelligent Driving Assistance Terminal User Manual

5

Chapter 2 Packing List and Appearance

Packing List

After receiving the product, first check the integrity of the product package, and then open the package to check whether all the accessories shown in Table 2-1 Packing List are included.

Packing List

No. Picture for Illustration Name Quantity

1

Intelligent Driving Assistance Terminal

1

2

Main Bundle 1

3

Screw Package 1

4

Panel Key 1

5

GPS Antenna (Only for the device which supports GPS function)

1

6

3G/4G Antenna (Only for the device which supports dial function)

1

Front Panel

Insert the panel key and switch it to the unlocking position to open the front panel. Interfaces on front panel are shown in Figure 2-1 and the corresponding functions are described in Table 2-2.

Intelligent Driving Assistance Terminal User Manual

6

Front Panel

Interfaces Description (Front Panel)

Name Description

Indicator Light

Power:

Solid red: the device is powered on.

Status:

Solid green: ADAS works properly.

Fast flashing: exception occurs.

SIM Card Slot Dial to connect to network after inserting SIM card.

USB Interface Calibrate the Device.

SD Card Slot Insert SD card for local storage.

Rear Panel

Interfaces on rear panel are shown in Figure 2-2 and their corresponding functions are described in Table 2-3.

Interfaces on rear panel may vary by model. Please refer to the actual model. This manual illustrates all the interfaces which can be found on different device models.

Intelligent Driving Assistance Terminal User Manual

7

Rear Panel

Interfaces Description (Rear Panel)

Name Description

Four-core Aviation Plug 4 Connects to mobile camera.

Four-core Aviation Plug 3 Connects to mobile BSD camera.

Four-core Aviation Plug 2 Connects to mobile Abnormal Detection camera.

Four-core Aviation Plug 1 Connects to mobile ADAS camera.

RS-485 Reserved.

I/O Interface Connects to main bundle. Refers to Chapter 4 Wiring for details.

GPS Antenna Interface Connects to GPS antenna and GPS device.

3G/4G Antenna Interface M-ANT. Connects to 3G/4G antenna.

Intelligent Driving Assistance Terminal User Manual

8

Chapter 3 Installation

Preparation

Disconnect the power when you assemble, disassemble, or wire the device. DO NOT operate when the power is on to avoid safety hazards.

Before installation, take out the device from the package and check whether the device and accessories are included and whether they are damaged. Refer to Section 2.1 Packing List for accessories checking.

This manual takes one type of various devices as an example for installation illustration. Devices

may vary from each other in appearance and size. Please refer to the actual device.

Before installation, you need to select an appropriate installation location and arrange cable routing to make sure the power and cables are safe and stable. Convenience and rationality should also be considered.

Select the location where the vehicle vibration is relatively weak (such as the rear space of the driver seat or front passenger seat) and is away from the vehicle engine.

Make sure the intelligent terminal is away from the heat source of the vehicle and is installed on the location with good ventilation for heat dissipation.

Due to the special heat dissipation feature of the intelligent terminal, please reserve enough installation space for the device. The recommended space is illustrated in Figure 3-1.

Recommended Installation Space

Unit: mm (inch)

Intelligent Driving Assistance Terminal User Manual

9

Place the device horizontally. Installing the device from any other angles may damage the device.

Basic Requirements

Work related to electricity must be in strict compliance with the local electrical safety regulations, fireproof regulations, and other relevant regulations.

Disconnect all the power related to the device during installation.

Cable Routing Requirements

The cable direction should be the same as the direction of original vehicle cables. Route cables along the original cable slot of the vehicle and bundle them with the original cables.

Make sure the cable routing is neat and hidden.

Prepare anti-static gloves, cross screwdriver, and L-shape hex screwdriver.

Device Installation

Before you start

You need to purchase SD card and SIM Card in advance. Select the card according to your need.

SIM Card is used for dial-up Internet connection for the device.

SD card is used for local storage. After installation, the intelligent terminal can store data like recordings, warning information, and captures in the SD card.

To use the SD card, it needs to be formatted first.

Wear anti-static gloves.

Insert panel key and rotate it to the unlocking position to open the front panel.

Intelligent Driving Assistance Terminal User Manual

10

Interface Description

Insert cards.

Insert SIM card slowly into the SIM card slot.

Insert SD card slowly into the SD card slot and when you hear a click sound, the installation is completed.

Drill holes on the vehicle according to the holes on the intelligent terminal.

Align the holes on both terminal and vehicle.

Fix the terminal on the vehicle with four fixing screws and the installation is completed.

Fix the Device

Install the 3G/4G antenna and GPS antenna on the appropriate location and connect the cables to the corresponding interfaces.

Requirements: Place the antenna vertically and make sure the signal receiving end faces up.

Intelligent Driving Assistance Terminal User Manual

11

If the cable is too long, roll it into circle and bundle it to ensure signal receiving quality.

Install 3G/4G antenna on the non-metal object, such as windshield screen and seat back, and make sure the antenna is 50 cm or farther away from the metal objects.

Install the Antenna

It is recommended to install the GPS antenna on the top of the vehicle, and connect the wire to the antenna by punctuate a hole or through the gap of the door. In the former case, make sure that hole is water tight.

If the GPS antenna has to be installed inside the vehicle due to special situations, the requirements are as follows.

Install the antenna on the platform under the windshield screen.

Fix the antenna with neutral silicone sealant.

Adjust the antenna location to make sure signal quality.

Intelligent Driving Assistance Terminal User Manual

12

Chapter 4 Wiring

I/O Wiring

After connecting to the main bundle, the I/O interface of the intelligent terminal can be connected to the vehicle battery for power supply. Or it can be connected to signal, such as vehicle turning, to collect driving information and store the information in the terminal.

Connect cables to their corresponding interfaces according to Figure 4-1 and Table 4-1.

Interface Description

I/O Interface Description

No. Description No. Description No. Description

1 Power 2 Reserved 3 Reserved

4 ACC 5 Speed 6 Turn Left

7 Reserved 8 Buzzer+ 9 Reserved

10 CAN+ 11 Reserved 12 GND

13 Reserved 14 Reserved 15 Turn Right

16 Brake 17 Reserved 18 Buzzer-

19 Reserved 20 CAN- - -

Power Wiring

To ensure correct wiring, consult with the vehicle manufacturer about the connection method of vehicle starter to avoid device damage resulted by mismatch.

Intelligent Driving Assistance Terminal User Manual

13

The device supports ignition startup and the prerequisite is that the terminal power is connected to the vehicle ignition starter.

Refer to Section 4.1 for interface description, find 1 (Power), 4 (ACC), 12(Ground) and connect them to vehicle battery as shown in Figure 4-2.

Connect device power to the anode of vehicle constant power. Skip the main switch of vehicle constant power.

Connect the ground interface of the device to the cathode of vehicle constant power.

Connect the AAC interface of the device to the vehicle ignition starter.

Power Wiring

The vehicle constant power refers to the master switch of vehicle power system. After flaming out, the constant power can still supply direct current to devices in vehicle.

Power Up and Check Device

After completing the above installation steps, power the device up.

Observe the power status indicator: If the indicator is solid red, it means the device is powered up.

Intelligent Driving Assistance Terminal User Manual

14

Insert panel key, rotate it to the locked position to lock the front panel. The installation is completed.

The debugging and parameter configuration of the device is completed by professionals via dedicated APP.

Before configuration, connect the APP to the intelligent terminal Wi-Fi. The SSID is ADAS-A4H-XXXX (XXXX refers to the last four digits of the device serial No.) and the default password is 1234567890

Intelligent Driving Assistance Terminal User Manual

15

Chapter 5 APP Operation

Install the Calibration App

Calibration is to set up the physical coordinate of the device for accurate algorithmic detection.

When installing the app, it is recommended to receive the technical support in setting up the

actual parameters for place of installation.

The user needs to apply for the account and password from headquarter.

Scan the following QR code in the following figure to download the calibration app.

QR Code for App Downloading

Connect the device to power supply and plugin the calibration module.

Open the app and connect the Wi-Fi name starting with ADAS

Enter the password: the password is 1234567890 by default.

Change the password to activate the device.

Intelligent Driving Assistance Terminal User Manual

16

First Page

Connect the Wi-Fi with new password to enter the First Page.

ADAS Calibration

To calibrate ADAs camera, you need to enter the following parameters in the app:

the height of ADAS camera

the distances between ADAS camera and the outer edge of the two wheels

the distance between ADAS camera and the bumper

Tap Camera Setting on the ADAS Settings page.

Intelligent Driving Assistance Terminal User Manual

17

Camera Settings on ADAS Settings

On the Camera Settings page, fill in the parameters.

Intelligent Driving Assistance Terminal User Manual

18

Camera Parameters

Tap save to complete setting.

There are two methods to conduct the ADAS calibration: the calibration pole method and the disappearance line method

Before You Start:

Prepare a calibration pole before calibration.

Place the calibration pole 1.5 m away from the front of the car at the middle. Make sure that the calibration pole is vertical and at the same height with the camera.

Intelligent Driving Assistance Terminal User Manual

19

The Position of the Calibration Pole

Open the side of the camera and adjust two black screws of the ADAS camera with a small cross screwdriver. The visible one is for fixing the camera, and the deeper, non-visible one is for calibrating the angle of camera. Make sure that the apex of the pole is within the yellow rectangle.

Tap move in the app to adjust the horizontal line and vertical line, and make sure that they coincide with the pole.

Save and tap Next.

Park the car along the middle line of the road with equal distance to each side. Make sure that the road is even and the horizontal line is visible.

Adjust the black screw of the ADAS camera to calibrate its angle, and make sure that the apex of the pole is within the yellow rectangle.

If due to the angle of the camera, the apex of the calibration pole cannot appear within the yellow rectangle, then tap move in the app to adjust the horizontal line and vertical line until they coincide with the pole.

Save and tap Next.

Intelligent Driving Assistance Terminal User Manual

20

Abnormal Detection and BSD Camera Parameters

You can configure the parameters of Abnormal Detection and BSD according to your actual need. On the First Page, 5 Channels are available. Channel 2 is for Abnormal Detection and Channel 3 is for BSD. After choosing the channel you need, tap Channel Configuration.

In each of these configuration pages, you can choose whether to enable this channel and perform the required function to send alarm. In addition, there are and 3 types of settings, among which the Video Settings and Record Schedule Settings are the same for different channels.

On the First Page, choose Channel 2 and tap Channel Configuration to enter the Abnormal Detection setting page.

Abnormal Detection Settings

Tap Abnormal Detection Setting to enter the setting page for parameters configuration.

Intelligent Driving Assistance Terminal User Manual

21

Abnormal Detection Parameter Settings

Tap Save to enable your configuration.

Intelligent Driving Assistance Terminal User Manual

22

On the Abnormal Detection Parameter Settings page, you can specify the behavior that will trigger alarm, the specific way to store the capture and recording, the volume and sensitivity of the alarm.

On the Advanced setting page, you can lower the alarm frequency by lowering its sensitivity.

Advanced Settings for Abnormal Detection

On the First Page, choose Channel 3 and tap Channel Configuration to enter the BSD setting page.

Intelligent Driving Assistance Terminal User Manual

23

BSD Settings

On the BSD setting page, tap BSD Setting to enter the setting page and configure parameters.

Intelligent Driving Assistance Terminal User Manual

24

BSD Settings

Tap Save to enable your configuration.

On BSD Parameter Settings page, you can

enable Right Side to warns against vehicles in the blind spot

choose the specific way to store the capture and recording

set the volume of the alarm

Tap Advanced Setting on BSD Parameter Settings page to enter advance setting.

Intelligent Driving Assistance Terminal User Manual

25

Advanced Setting

On the Advanced setting page, you can

Configure the sensitivity of detection: the more sensitive it is, the easier that the algorithm detection will be triggered.

Choose the algorithm detection type, calibrate the detection area.

Set the steering angle and link it.

Set the Calibration Detection Area

To calibrate the detection area:

Tap the Calibration Detection Area on the Advanced setting page.

Set the area by moving the 5 coordinate points.

Intelligent Driving Assistance Terminal User Manual

26

Area Setting for BSD

Choose the level and view point of the area by tapping corresponding items.

Tap save to complete setting.

Intelligent Driving Assistance Terminal User Manual

27

IPC Support

Tap Network Camera on the First Page.

Network Camera

Tap Device Can be Added and choose the IPC camera

Intelligent Driving Assistance Terminal User Manual

28

Tap Quickly Add.

To check IPC added, tap Added Device. To view video recorded, tap CHAN5 on the First Page.

At most 1 IPC can be added.

Tap Network Camera on the First Page.

Intelligent Driving Assistance Terminal User Manual

29

Network Camera

Tap Added Device and select the device to be deleted.

Intelligent Driving Assistance Terminal User Manual

30

Select the Device to be Deleted

Tap Delete.

Intelligent Driving Assistance Terminal User Manual

31

Device Calibration

Tap Format on the First Page.

Choose the device to be formatted.

Format HDD

Tap Settings on the First Page.

Tap Other Platform.

Tap Ehome and enter HCP IP Address, Port No., and Secret key.

Configure parameters on HCP platform. To verify ISUP protocol, the device id needs to be provided, which is identical to the serial number of the device.

Intelligent Driving Assistance Terminal User Manual

32

Other Platform

Ehome

Intelligent Driving Assistance Terminal User Manual

33

Before you start:

Format the SD Card in the device. For details, see 5.5.1 Format the Storage.

Copy the digicap.dav program to the root directory of the SD Card.

Insert the SD Card into the slot at the bottom of the device.

Connect the device to power supply and the update will start.

In the updating process, there will be voice prompt. The device will reboot after the update. The digicap.dav program will be deleted. For testing and batch updating purpose, rename the update program to digicap_FACTORY_BACK_DOOR.dav to keep it.

The display output can be configured to show the video of different cameras. 4 kinds of window division are available: 1, 2, 4 and 6 window division.

To configure the output:

Choose the camera to be displayed.

Display Output Configuration

(optional) Enable the window division and choose the type of window division.

Tap Save to complete the setting.

0

Manualsnet FAQs

If you want to find out how the AE-AC1130-A Hikvision works, you can view and download the Hikvision AE-AC1130-A Terminal User's Manual on the Manualsnet website.

Yes, we have the User's Manual for Hikvision AE-AC1130-A as well as other Hikvision manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User's Manual should include all the details that are needed to use a Hikvision AE-AC1130-A. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Hikvision AE-AC1130-A Terminal User's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Hikvision AE-AC1130-A Terminal User's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Hikvision AE-AC1130-A Terminal User's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Hikvision AE-AC1130-A Terminal User's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Hikvision AE-AC1130-A Terminal User's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.