Hikvision DS-K1A802AEF Terminal Quick Start Guide PDF

Appearance1

Installation2

2020 Hangzhou Hikvision Digital Technology Co., Ltd. It includes instructions on how to use the Product. The software embodied in the Product is governed by the user license agreement covering that Product. About this Manual This Manual is subject to domestic and international copyright protection. Hangzhou Hikvision Digital Technology Co., Ltd. (Hikvision) reserves all rights to this manual. This manual cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior written permission of Hikvision. Trademarks and other Hikvision marks are the property of Hikvision and are registered trademarks or the subject of applications for the same by Hikvision and/or its aliates. Other trademarks mentioned in this manual are the properties of their respective owners. No right of license is given to use such trademarks without express permission. Legal Disclaimer TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED AS IS, WITH ALL FAULTS AND ERRORS, AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL HIKVISION, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS THE APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS. Data Protection During the use of device, personal data will be collected, stored and processed. To protect data, the development of Hikvision devices incorporates privacy by design principles. For example, for device with facial recognition features, biometrics data is stored in your device with encryption method; for ngerprint device, only ngerprint template will be saved, which is impossible to reconstruct a ngerprint image. As data controller, you are advised to collect, store, process and transfer data in accordance with the applicable data protection laws and regulations, including without limitation, conducting security controls to safeguard personal data, such as, implementing reasonable administrative and physical security controls, conduct periodic reviews and assessments of the eectiveness of your security controls.

DS-K1A802A Series Fingerprint Time Attendance Terminal

Quick Start Guide

UD15388B-B

Screen

Keypad Card Presenting Area USB Interface Debugging Port

Power Interface

Network Interface

Fingerprint Recognition Area

Keypad Descriptions

ESC OK

1 2 ABC

3 DEF

4 GHI

6 MNO

7 PQRS

8 TUV

9 WXYZ

5 JKL

Exiting Key

Direction Keys

Numeric Keys/ Letter Keys

OK Key

Editing Key

Deleting Key

0

OK Key: Press the key and conrm operations. Hold the key for 2 s to enter the login interface. Deleting Key: Press the key to delete the entered letter or number. If the device supports connecting lithium battery, long press the key to power o the device.

Numeric Keys/Letter Keys: Press the key to enter numbers or letters. Key 0 can also represent a space key except you are using the number input method.

Exiting Key: Press the key to exit the menu.

Direction Keys: Press , , and to move the cursor on the screen. Or on the text entering page, press up or down button to change the input method.

Editing Key: Press the key to enter the editing status. You can shift among numbers/lowercases, numbers/uppercases and symbols. Notes: 1. The pictures here are for reference only. Some models do not support card presenting function. For details, refer to the actual products. 2. If the attendance mode is Manual, the OK key, the direction key, and the exiting key can be the shortcut key of the attendance status.

14 0

m m

155 mm 28 mm

Front View Side View Back View Keypad

Method 1: Wall Mounting

without Mounting Plate

Method 2: Wall Mounting

with Mounting Plate

2. Insert the screw sockets of the setscrews in the drilled holes. 3. Fix and fasten the screws in the sockets on the wall or other places. (You should reserve 5.2 mm to 5.5 mm for the hanging the device when x and fasten the screws.)

4. Align the 4 holes on the device plate with the xed screws and hang the device on the wall.

1. Drill 4 holes on the wall or other places according to the mounting template. (Supplied) Note: The length and width will be 2 to 3 mm smaller than the actual devices.

152 mm

12 7

m m

Steps: 1. Install the gang box on the wall. Note: Make sure the gang box screw holes match the mounting plates. The gang box here is for reference only. Select an appropriate gang box to install. The gang box is not supplied. 2. Fix the mounting plate on the gang box with 2 supplied screws (SC-PM4X10-IMP). 3. Route the device cable through the cable hole of the mounting plate and insert the cables in the gang box. 4. Align the terminal with the mounting plate, and secure the terminal on the mounting plate with two supplied socket hexagon screws (SC-KM3X10_3-SUS).

4 4

Device Mounting

Plate Gang Box Wall

1

2

3

120 mm

13 0.

6 m

m

25 .1

5 m

m 66.6 mm

53 .2

m m

36.5 mm

83 .6

5 m

m

68.1 mm

Basic Operation 3 Activation

Parameters Configuration

Activating via SADP Activating via Client Software 1

2

1. Download SADP Software Get the SADP software from the supplied disk. Install and run the software. 2. Activate Device Check the inactive device from the device list. Create a password in the right side of the interface and conrm the password. 3. Edit Device IP Address Check the device and manually edit the device IP address, Port No., Subnet Mask, Gateway, etc.

1. Get the client software from the ocial website. Install and run the client software. 2. Enter the Device Management page. 3. Click Device tab on the top of the right panel. 4. Click Online Device to show the online device area at the bottom of the page. The searched online devices are displayed in the list. 5. Check the device status (shown on Security Level column) and select an inactive device. 6. Click Activate to open the Activation dialog. 7. Create a password in the password eld, and conrm the password. 8. Click OK to activate the device. 9. Select an activated device in Online Device area, click on the Operation column to open the Modify Network Parameter window. Change the device IP address to the same subnet with your computer if you need to add the device to the client.

Add User: Edit the ID No. and the user name. Press the OK key to conrm. Enter the card No., register the ngerprint, set the password, select the department, select the user role and select the authentication mode. Save the parameters to conrm adding. The employee ID should be unique, should be between 1 and 99999999, and should not start with 0.

Edit Department: Select the department in the department list and select Edit. Edit the department name, the shift type and the shift name. Save the parameters to conrm editing.

Shift Management: Normal ShiftEnter the Normal (Normal Shift) interface under the Shift Management menu. Congure the shift rule and the normal shift. Save the parameters to conrm editing. Man-Hour Shift: Enter the Man-Hour (Man-Hour Shift) interface under the Shift Management menu. Congure the man-hour parameters and save the parameters.

Add Holiday: Enter the New Add New Holiday interface under the Holiday menu. Enter the holiday No., the holiday name, the holiday start date and the holiday end date. Save the parameters to conrm conguration.

Shift Schedule Management: Schedule Shift by Department: Select a department to congure in the By Dept. (Schedule by Department) interface. Congure the shift, the start date, the end date and the holiday. Save the parameters to conrm conguration. Schedule Shift by Individual: Select New Individual Shift in the By Indiv. (Schedule by Individual) interface. Select a person to schedule in the New Individual Shift interface. Congure the shift, the schedule start date and the end date. Save the parameters to conrm editing.

The device will automatically check the USB ash drive memory. If there is no enough space for exporting, a prompt will be displayed. You are able to congure the record over threshold prompt and record delete function in the System interface. Record over Threshold Pop up Prompt (%): If the attendance record memory reaches the congured value, the system will pop up a prompt to remind you. If congure the threshold to 99%, the system will pop up a prompt to remind you to delete the attendance data when the capacity reaches the threshold. The available value: 1 to 99. Record Delete: When the function is enabled, the terminal will delete the rst 3000 attendance records when the memory is full, in order to save the new attendance records. By default, the function is enabled. See Section 5.2 Attendance Record Delete Rule in the User Manual of Fingerprint Time Attendance Terminal.

Activating via Device Power on and wire the network cable after installation. You should activate the device before the rst login. After powering on, the interface will be displayed as follows. You can create the device password and conrm the password to activate. The default values of the terminal are as follows: The default IP address: 192.0.0.64 The default port No.: 8000 The default user name: admin

Congure the shift schedule by department or by individual. Schedule Shift by Department Flow: Add User (Select department when adding new user.) - Department Management - Shift Management - Add Holiday - Shift Schedule Management (Schedule Shift by Department) Schedule Shift by Individual Flow: Add User - Shift Management - Add Holiday - Shift Schedule Management (Schedule Shift by Individual)

Attendance Report: Plug the USB ash drive in the device. In the Report interface, select a table type to export. Press the OK key to export the attendance report to the USB ash drive. The available USB ash drive format is FAT32.

View License: You can view the device License via the website: http://opensource.hikvision.com/Home/List?id=46

[Number]

OK Next Input Method

Device Activation

Activation Password (8 to 16 Characters)

Attendance Status: Set attendance status as check in, check out, break out, break in, overtime in, or overtime out.

STRONG PASSWORD RECOMMENDED We highly recommend you create a strong password of your own choosing (using a minimum of 8 characters, including upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your

Regulatory Information FCC Information Please take attention that changes or modication not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the RE Directive 2014/53/EU, the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU.

2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info

2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specic battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see: www.recyclethis.info

Industry Canada ICES-003 Compliance This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence. L'exploita- tion est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformment la rglementation d'Industrie Canada, le prsent metteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou infrieur) approuv pour l'metteur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique l'intention des autres utilisateurs, il faut choisir le type

FCC Conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. EU Conformity Statement

Scan the QR code to get the user manual for detailed information. Note that mobile data charges may apply if Wi-Fi is unavailable.

Use only power supplies listed in the user instructions: Model Manufacturer Standard

DSA-12PFT-12FUK 120100

DSA-12PFT-12FAU 120100

DSA-12PFT-12FIN 120100

DSA-12PFT-12FUS 120100

DSA-12PFT-12 FBZ 120100

Dee Van Enterprise Co., Ltd. BS

Dee Van Enterprise Co., Ltd.

Dee Van Enter