Hikvision DS-3E0109P-C Switch Quick Start Guide PDF
Summary of Content for Hikvision DS-3E0109P-C Switch Quick Start Guide PDF
Applicable Models This manual is applicable to DS-3E0105XX and DS-3E0109XX series 100M long-range PoE switch. Symbol Conventions The symbols that may be found in this document are dened as follows.
During the installation and utilization of the device, please strictly conform to electrical safety rules in dierent nations and regions. Ensure to use the attached power adaptor only and not to change the adaptor randomly. Please refer to specication table for specic requirements of power adaptor. If the product does not work properly, please contact your dealer or the nearest service center. Never attempt to disassemble the camera yourself. (We shall not assume any responsibility for problems caused by unauthorized repair or maintenance.)
The device must be installed in machine room only, and only maintenance sta or qualied person should access to the device. Do not touch the upper cover area of the device that may be overheated. Power must be shut down during cable connection, device installation and dismantlement. You shall acknowledge that the use of the device with Internet access might be under network security risks, please strengthen protection for your personal information and data security. If you nd the device might be under network security risks, please contact with us. Proper conguration of all passports and other security settings is the responsibility of the installer, and you shall keep user name and passports properly. Please keep all original packing materials properly. If the product does not work properly, pack the switch in its original packing materials for shipping. We shall not assume any responsibility for damages caused by improper packing materials during shipping. Ensure that your devices powered via the PoE port have their shells protected and re-proofed, because the switches are not compliant with the Limited Power Source (LPS) standard.
Device Connection Connect your devices according to your actual networking requirements.
DIP Switch On: Extend model is on, connecting PoE port 1-4 (4 ports), 1-8 (8 ports). O: Extend model is o. Grounding Terminal The grounding terminal connects with ground cable in case of lightning. Power Port Connect power port of the switch with power socket with power cord to provide power to the switch.
Switch x 1 Quick Start Guide x 1Power Adapter x 1
PoE Ports 100M PoE ports connect to other PoE devices with network cable. UPLINK 100M network port connects to other switches with network cable. PWR Indicator Solid means powered up normally. Unlit means no power supply connected or power supply is abnormal. PoE-MAX Indicator Solid/ashing means the output power of the switch will reach the upper limit, and the power supply may be abnormal if more devices are connected. Unlit means power supplying is normal.DS-3E0105XX Series
1 2 3 4 5
PoE Indicator PoE-MAX Indicator
PWR Indicator PoE Ports UPLINK
1 2 3 4 5 6 7 8 9
PoE-MAX Indicator PWR Indicator
LINK/ACT Indicator PoE Indicator PoE Ports
Indicates a hazard with a high level of risk, which if not avoided, will result in death or serious injury.
Provides additional information to emphasize or supplement important points of the main text.
Indicates a potentially hazardous situation, which if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results.
6 KV Surge Protection
Up to 300 meters (Port 1-4)
4-Port 10/100M PoE 10/100M Unmanaged PoE Pro-Series
4/8-Port 100M Long-Range PoE Switch
Quick Start Guide
Power-On Checking Regulatory Information FCC Information Please take attention that changes or modication not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. FCC Conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the EMC Directive 2014/30/EU, the LVD Directive 2014/35/EU,
the RoHS Directive 2011/65/EU. 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points.
For more information see: www.recyclethis.info 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specic battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb),
or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see: www.recyclethis.info Industry Canada ICES-003 Compliance This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.
See the following table and check whether your devices are correctly connected. After proper connection, you can use your switch without doing any settings.
Indicator Status Description
The switch is powered on normally.
No power supply connected or power supply is abnormal.
The port is connected.
The port is transmitting data.
The port is disconnected or connection is abnormal.
Please use the attached power cord in package to power up the switch.
The switch supports auto MDI/MDIX of ports, you can use straight-through cable or crossover cable to connect the switch and opposite Ethernet devices.
UD11561B-A6 7 8
The switch provides power supply to PD normally.
The switch is disconnected to PD, or provides power supply to PD abnormally.
The output power of the switch will reach the upper limit. The power supply may be abnormal if more devices are connected. The switch provides power supply to PD normally.
Quick Start Guide COPYRIGHT 2018 Hangzhou Hikvision Digital Technology Co., Ltd. ALL RIGHTS RESERVED. Any and all information, including, among others, wordings, pictures, graphs are the properties of Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinafter referred to be Hikvision). This user manual (hereinafter referred to be the Manual) cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior written permission of Hikvision. Unless otherwise stipulated, Hikvision does not make any warranties, guarantees or representations, express or implied, regarding to the Manual. About this Manual This Manual is applicable to DS-3E0105XX and DS-3E0109XX series 100M long-range PoE switch. The Manual includes instructions for using and managing the product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to rmware updates or other reasons. Please nd the latest version in the company website (http://overseas.hikvision.com/en/). Please use this user manual under the guidance of professionals. Trademarks Acknowledgement and other Hikvisions trademarks and logos are the properties of Hikvision in various jurisdictions. Other trademarks and logos mentioned below are the properties of their respective owners. Legal Disclaimer TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED AS IS, WITH ALL FAULTS AND ERRORS, AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL HIKVISION, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE
If you want to find out how the DS-3E0109P-C Hikvision works, you can view and download the Hikvision DS-3E0109P-C Switch Quick Start Guide on the Manualsnet website.
Yes, we have the Quick Start Guide for Hikvision DS-3E0109P-C as well as other Hikvision manuals. All you need to do is to use our search bar and find the user manual that you are looking for.
The Quick Start Guide should include all the details that are needed to use a Hikvision DS-3E0109P-C. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.
The best way to navigate the Hikvision DS-3E0109P-C Switch Quick Start Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.
This Hikvision DS-3E0109P-C Switch Quick Start Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.
You can download Hikvision DS-3E0109P-C Switch Quick Start Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.
To be able to print Hikvision DS-3E0109P-C Switch Quick Start Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Hikvision DS-3E0109P-C Switch Quick Start Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.