Hikvision DS-KD8023-E6 Station User's Manual PDF

Video Intercom D Series Door Station

User Manual

Legal Information

2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.

About this Manual The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version of this Manual at the Hikvision website ( https://www.hikvision.com/ ). Please use this Manual with the guidance and assistance of professionals trained in supporting the Product.

Trademarks

and other Hikvision's trademarks and logos are the properties of Hikvision in various jurisdictions. Other trademarks and logos mentioned are the properties of their respective owners.

Disclaimer TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED AS IS AND WITH ALL FAULTS AND ERRORS. HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN

Video Intercom D Series Door Station User Manual

i

CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS. YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS.

Video Intercom D Series Door Station User Manual

ii

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol Description

Danger Indicates a hazardous situation which, if not avoided, will or could result in death or serious injury.

Caution Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results.

Note Provides additional information to emphasize or supplement important points of the main text.

Video Intercom D Series Door Station User Manual

iii

Safety Instruction

Warning All the electronic operation should be strictly compliance with the electrical safety

regulations, fire prevention regulations and other related regulations in your local region.

Please use the power adapter, which is provided by normal company. The power consumption cannot be less than the required value.

Do not connect several devices to one power adapter as adapter overload may cause over-heat or fire hazard.

Please make sure that the power has been disconnected before you wire, install or dismantle the device.

When the product is installed on wall or ceiling, the device shall be firmly fixed. If smoke, odors or noise rise from the device, turn off the power at once and

unplug the power cable, and then please contact the service center. If the product does not work properly, please contact your dealer or the nearest

service center. Never attempt to disassemble the device yourself. (We shall not assume any responsibility for problems caused by unauthorized repair or maintenance.)

Caution Do not drop the device or subject it to physical shock, and do not expose it to high

electromagnetism radiation. Avoid the equipment installation on vibrations surface or places subject to shock (ignorance can cause equipment damage).

Do not place the device in extremely hot (refer to the specification of the device for the detailed operating temperature), cold, dusty or damp locations, and do not expose it to high electromagnetic radiation.

The device cover for indoor use shall be kept from rain and moisture. Exposing the equipment to direct sun light, low ventilation or heat source such as

heater or radiator is forbidden (ignorance can cause fire danger). Do not aim the device at the sun or extra bright places. A blooming or smear may

occur otherwise (which is not a malfunction however), and affecting the endurance of sensor at the same time.

Video Intercom D Series Door Station User Manual

iv

Please use the provided glove when open up the device cover, avoid direct contact with the device cover, because the acidic sweat of the fingers may erode the surface coating of the device cover.

Please use a soft and dry cloth when clean inside and outside surfaces of the device cover, do not use alkaline detergents.

Please keep all wrappers after unpack them for future use. In case of any failure occurred, you need to return the device to the factory with the original wrapper. Transportation without the original wrapper may result in damage on the device and lead to additional costs.

Improper use or replacement of the battery may result in hazard of explosion. Replace with the same or equivalent type only. Dispose of used batteries according to the instructions provided by the battery manufacturer.

Improper replacement of the battery with an incorrect type may defeat a safeguard (for example, in case of some lithium battery types).

Do not dispose of the battery into fire or a hot oven, or mechanically crush or cut the battery, which may result in an explosion.

Do not leave the battery in an extremely high temperature surrounding environment, which may result in an explosion or leakage of flammable liquid or gas.

Do not subject the battery to extremely low air pressure, which may result in an explosion or the leakage of flammable liquid or gas.

CAUTION: Risk of explosion if the battery is replaced by an incorrect type.

Video Intercom D Series Door Station User Manual

v

Regulatory Information

FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help FCC Conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC/IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Video Intercom D Series Door Station User Manual

vi

ce matriel est conforme aux limites de dose d'exposition aux rayonnements, FCC / CNR-102 nonce dans un autre environnement.cette eqipment devrait tre install et exploit avec distance minimale de 20 entre le radiateur et votre corps.

EU Conformity Statement

This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU

2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info

2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see:www.recyclethis.info

Industry Canada ICES-003 Compliance This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

Video Intercom D Series Door Station User Manual

vii

1. this device may not cause interference, and 2. this device must accept any interference, including interference that may

cause undesired operation of the device.

Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence. L'exploitation est autorise aux deux conditions suivantes : 1. l'appareil ne doit pas produire de brouillage, et 2. l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique

subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement.

Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformment la rglementation d'Industrie Canada, le prsent metteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou infrieur) approuv pour l'metteur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas l'intensit ncessaire l'tablissement d'une communication satisfaisante. This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body. Cet quipement doit tre install et utilis une distance minimale de 20 cm entre le radiateur et votre corps.

Video Intercom D Series Door Station User Manual

viii

Contents

1 Appearance Description ............................................................................. 1

1.1 Appearance of 80 Series Door Station .............................................................. 1

1.2 Appearance of 81 Series Door Station .............................................................. 2

1.3 Appearance of 30 Series Door Station .............................................................. 3

2 Terminal and Wiring Description ................................................................ 5

2.1 Terminal Description ......................................................................................... 5

2.2 Wiring Description ............................................................................................ 7

2.2.1 D-Series Door Lock Wiring ........................................................................ 7

2.2.2 D-Series Door Contact Wiring (8081 Series) ............................................. 7

2.2.3 D-Series Exit Button Wiring (8081 Series) ................................................ 8

2.2.4 External Card Reader Wiring .................................................................... 9

2.2.5 D-Series Elevator Controller Wiring ........................................................ 11

2.2.6 Alarm Input Device Wiring ..................................................................... 11

2.2.7 Alarm Output Device Wiring .................................................................. 12

3 Installation ................................................................................................ 14

3.1 Installation of 80 Series Door Station .............................................................. 14

3.1.1 Gang Box for 80 Series Door Station ...................................................... 14

3.1.2 Flush Mounting with Gang Box .............................................................. 14

3.2 Installation of 81 Series Door Station .............................................................. 18

3.2.1 Gang Box for 81 Series Door Station ...................................................... 18

3.2.2 Flush Mounting with Gang Box .............................................................. 19

3.3 Installation of 30 Series Door Station .............................................................. 20

Video Intercom D Series Door Station User Manual

ix

3.3.1 Gang Box of 30 Series Door Station ........................................................ 21

3.3.2 Flush Mounting with Gang Box .............................................................. 21

4 Activation ................................................................................................. 24

4.1 Activate Device Locally .................................................................................... 24

4.2 Activate Device via Client Software ................................................................. 25

4.3 Activate Device via Web .................................................................................. 26

5 Local Operation ........................................................................................ 27

5.1 Local Configuration ......................................................................................... 27

5.1.1 Edit Network Parameters ........................................................................ 27

5.1.2 Door Station Settings .............................................................................. 27

5.1.3 Add Residents ......................................................................................... 28

5.1.4 About ...................................................................................................... 29

5.2 Video Intercom Operation .............................................................................. 29

5.2.1 Call Resident ........................................................................................... 29

5.2.2 Call Center .............................................................................................. 30

5.3 Unlock Door .................................................................................................... 30

5.3.1 Unlock by Password ................................................................................ 30

5.3.2 Unlock by Presenting Card ...................................................................... 30

6 Remote Configuration via Web ................................................................ 32

6.1 Live View ......................................................................................................... 32

6.2 User Management .......................................................................................... 32

6.3 Device Management ....................................................................................... 33

6.4 Parameters Settings ........................................................................................ 33

6.4.1 Local Parameters Settings ....................................................................... 33

Video Intercom D Series Door Station User Manual

x

6.4.2 System Settings ....................................................................................... 35

6.4.3 Network Settings .................................................................................... 37

6.4.4 Video & Audio Settings ........................................................................... 42

6.4.5 Display Settings ....................................................................................... 44

6.4.6 Event Settings ......................................................................................... 45

6.4.7 Intercom Settings .................................................................................... 48

6.4.8 Access Control Settings ........................................................................... 50

7 Configuration via Client Software ............................................................. 55

7.1 Edit Network Parameters ................................................................................ 55

7.2 Add Device ...................................................................................................... 55

7.2.1 Add Online Device .................................................................................. 55

7.2.2 Add Device by IP Address ....................................................................... 56

7.2.3 Add Device by IP Segment ...................................................................... 56

7.3 Remote Configuration ..................................................................................... 57

7.4 Device Management ....................................................................................... 57

7.5 Organization Management ............................................................................. 57

7.5.1 Add Organization .................................................................................... 57

7.5.2 Modify and Delete Organization ............................................................. 58

7.6 Person Management ....................................................................................... 58

7.6.1 Add Person ............................................................................................. 58

7.6.2 Modify and Delete Person ...................................................................... 59

7.6.3 Import and Export Person Information .................................................. 60

7.6.4 Get Person Information from Device ...................................................... 60

7.6.5 Change Person to Other Organization .................................................... 61

Video Intercom D Series Door Station User Manual

xi

7.6.6 Issue Card in Batch ................................................................................. 61

7.6.7 Permission Settings ................................................................................. 63

7.7 Video Intercom Settings .................................................................................. 64

7.7.1 Receive Call from Door Station ............................................................... 64

7.7.2 Live View via Door Station ...................................................................... 65

7.7.3 Release Notice ........................................................................................ 65

7.7.4 Search Video Intercom Information ....................................................... 66

A. Communication Matrix and Device Command ....................................... 68

Video Intercom D Series Door Station User Manual

xii

1 Appearance Description

1.1 Appearance of 80 Series Door Station

Figure 1-1 Appearance of 80 Series Door Station

Table 1-1 Descriptions

No. Description No. Description

1 IR Supplement Light 6 Keypad

2 Built-in Camera 7 Call Button

3 LCD Display Screen 8 Microphone

Video Intercom D Series Door Station User Manual

1

No. Description No. Description

4 Card Reading Area 9 Call Center Button

5 Loudspeaker 10 TAMPER

1.2 Appearance of 81 Series Door Station

Figure 1-2 Appearance of 81 Series Door Station

Video Intercom D Series Door Station User Manual

2

Table 1-2 Descriptions

No. Descripiton No. Description

1 Low Illumination Supplement Light

6 Call Center Button

2 Built-in Camera 7 Microphone

3 LCD Display Screen 8 Card Reading Area

4 Keypad 9 Loudspeaker

5 Call Button 10 TAMPER

1.3 Appearance of 30 Series Door Station Appearance of 30 Series Door Station

Video Intercom D Series Door Station User Manual

3

Table 1-3 Descriptions

No. Description No. Description

1 Low Illumination Supplement Light

6 Call Button

2 Loudspeaker 7 Call Center Button

3 LCD Display Screen 8 Microphone

4 Card Reading Area 9 TAMPER

5 Keypad

Video Intercom D Series Door Station User Manual

4

2 Terminal and Wiring Description

2.1 Terminal Description

Figure 2-1 Terminal Description

Table 2-1 Descriptions

Name Interface Description

LAN RESERVED RESERVED

LAN Network Interface

ALARM IN SEN1 Door Contact Detection Input 1/Door Contact

BTN1 Door Contact Detection Input 1/Door Contact

SEN2 Door Contact Detection Input 2/Door Contact

BTN2 Door Contact Detection Input 2/Door Contact

GND Grounding

AIN1 Alarm Input 1

AIN2 Alarm Input 2

AIN3 Alarm Input 3

AIN4 Alarm Input 4

Video Intercom D Series Door Station User Manual

5

Name Interface Description

RS485 485A+ RS-485 Communication Interfaces

485A-

GND Grounding

LOCK1 NO1 Door Lock Relay Output (NO)

COM1 Common Interface

NC1 Door Lock Relay Output (NC)

LOCK2 NO2 Door Lock Relay Output (NO)

COM2 Common Interface

NC2 Door Lock Relay Output (NC)

ALARM OUT` AO1+ Alarm Relay Output 1

AO1-

AO2+ Alarm Relay Output 2

AO2-

WIEGAND TAMP Tamper-proof Input of Wiegand Card Reader

OK Card Reader Indicator Output (Valid Card Output)

ERR Card Reader Indicator Output (Invalid Card Output)

BZ Card Reader Buzzer Output

W0 Data Input Interface Wiegand Card Reader: Data 0

W1 Data Input Interface Wiegand Card Reader: Data 1

GND Grounding

Video Intercom D Series Door Station User Manual

6

Name Interface Description

RES Reserved

RESERVED GND Grounding

RES Reserved

POWER 12 VDC DC 12 V Power Supply Input

2.2 Wiring Description

2.2.1 D-Series Door Lock Wiring

Figure 2-2 Door Lock Wiring

Note Terminal NC1/COM1 is set as default for accessing electric bolt. Terminal NO1/

COM1 is set as default for accessing electric strike. To connect electric lock in terminal NO2/COM2/NC2, it is required to set the

output of terminal NO2/COM2/NC2 to be electric lock with iVMS-4200client software.

2.2.2 D-Series Door Contact Wiring (8081 Series)

Video Intercom D Series Door Station User Manual

7

Figure 2-3 Door Contact Wiring

Note

Terminal SEN1/SEN2 can both connect to door contact.

2.2.3 D-Series Exit Button Wiring (8081 Series)

Video Intercom D Series Door Station User Manual

8

Figure 2-4 Exit Button Wiring

Note

Terminal BTN1/BTN2 can both connect to exit button.

2.2.4 External Card Reader Wiring

Note Please set the DIP switch first before connecting the card reader. If the DIP switch should be configured when the card reader is power-on, please

reboot the card reader after configuring the DIP switch. The DIP switch description is shown in the following table:

Table 2-2 DIP Switch Description

No. Description How to Configure

1 to 4 Set the RS-485 address ON: 1

Video Intercom D Series Door Station User Manual

9

No. Description How to Configure

OFF: 0

6 Select Wiegand protocol or RS- 485 protocol

ON: Wiegand OFF: RS-485

7 Set the Wiegand protocol (It is invalid when setting OFF in 6.)

ON: Wiegand 26 OFF: Wiegand 34

RS-485 Card Reader Wiring

Figure 2-5 RS-485 Card Reader Wiring

Note

When card reader is accessed via RS-485, the door station cannot connect to elevator controller.

Video Intercom D Series Door Station User Manual

10

Wiegand Card Reader Wiring

Figure 2-6 Wiegand Card Reader Wiring

2.2.5 D-Series Elevator Controller Wiring

Enter a short description of your concept here (optional). This is the start of your concept.

2.2.6 Alarm Input Device Wiring

The alarm input wiring diagram is as follows:

Video Intercom D Series Door Station User Manual

11

Figure 2-7 Alarm Input Wiring Diagram

2.2.7 Alarm Output Device Wiring

The alarm output wiring diagram is as follows:

Video Intercom D Series Door Station User Manual

12

Figure 2-8 Alarm Output Wiring Diagram

Video Intercom D Series Door Station User Manual

13

3 Installation

Make sure the device in the package is in good condition and all the assembly parts are included.

The power supply the door station support is 12 VDC. Please make sure your power supply matches your door station.

Make sure all the related equipment is power-off during the installation. Check the product specification for the installation environment. To install the door station onto the wall, you are required to use a matched gang box.

Figure 3-1 Gang Box

Note The dimension of gang box is: 407.5 (W) 135 (H) 55 (D) mm. The dimensions above are for reference only. The actual size can be slightly

different from the theoretical dimension.

3.1.2 Flush Mounting with Gang Box

Video Intercom D Series Door Station User Manual

14

Steps 1. Drill a hole in the wall for inserting the gang box. The size of the hole should be

larger than that of the gang box. The suggested size of the hole is 408 (W) 135.5 (H) 55 (D) mm.

Figure 3-2 Drill an Installation Hole 2. Insert the gang box into the hole and fix it with 4 PA4 screws.

Video Intercom D Series Door Station User Manual

15

Figure 3-3 Insert the Gang Box 3. Make sure the edges of the gang box align to the wall and the hook A and hook B

of the gang box hook onto the wall. 4. Route the cables of the door station through the cable hole. 5. Insert the door station into the gang box and then move the door station

downward to hook the lock catches on the rear panel onto the hook C of the gang box.

Video Intercom D Series Door Station User Manual

16

Figure 3-4 Insert the Door Station 6. Fix the door station with 2 PM3 screws. 7. After fixing the door station onto the gang box, secure it by inserting the plate and

insert 2 POM2 screws.

Video Intercom D Series Door Station User Manual

17

Figure 3-5 Fix the Door Station To install the door station onto the wall, you are required to use a matched gang box.

Figure 3-6 Gang Box

Note The dimension of gang box is: 404 (W) 123 (H) 47.5 (D) mm. The dimensions above are for reference only. The actual size can be slightly

different from the theoretical dimension.

Video Intercom D Series Door Station User Manual

18

3.2.2 Flush Mounting with Gang Box

Steps 1. Drill a hole in the wal for inserting the gang box. The size of the hole should be

larger than that of the gang box. The suggested size of the hole is 404.5 (W) 123.5 (H) 48 (D) mm.

Figure 3-7 Drill an Installation Hole 2. Insert the gang box into the hole and fix it with 4 PA4 screws. Make sure the edges

of the gang box align to the wall.

Figure 3-8 Insert the Gang Box

Video Intercom D Series Door Station User Manual

19

3. Route the cables of the door station through the cable hole. 4. Put the door station into the gang box and hook the lock catches on the rear

panel.

Figure 3-9 Install the Door Station 5. Pull the door station downward and then push it towards the inside to make sure

it fits the hole. 6. Tighten the screws of the door station with the wrench.

Figure 3-10 Fix the Door Station To install the door station onto the wall, you are required to use a matched gang box.

Video Intercom D Series Door Station User Manual

20

Figure 3-11 Gang Box

Note The dimension of gang box is: 343 (W) 113 (H) 55 (D) mm. The dimensions above are for reference only. The actual size can be slightly

different from the theoretical dimension.

3.3.2 Flush Mounting with Gang Box

Steps 1. Drill a hole in the wall for inserting the gang box. The size of the hole should be

larger than that of the gang box. The suggested size of the hole is 343.5 (W) 113.5 (H) 55.5 (D) mm.

Video Intercom D Series Door Station User Manual

21

Figure 3-12 Drill an Installation Hole 2. Insert the gang box into the hole and fix it with 4 PA4 screws. 3. Make sure the edges of the gang box align to the wall. 4. Route the cables of the door station through the cable hole. 5. Put the door station into the gang box. 6. Fix the door station to the gang box with 4 screws.

Video Intercom D Series Door Station User Manual

22

Figure 3-13 Fix the Door Station

Video Intercom D Series Door Station User Manual

23

4 Activation

4.1 Activate Device Locally You are required to activate the device first by settings a strong password for it before you can use the device.

Steps 1. Power on the device to enter the activation page automatically. 2. Create a password and confirm it.

Table 4-1 Number Button Description

No. Description No. Description

1 1 6 6mnoMNO

2 2abcABC 7 7pqrsPQRS

3 3defDEF 8 8tuvTUV

4 4ghiGHI 9 9wxyzWXYZ

5 5jklJKL 0 0

Hold 0 to enter special characters.

Table 4-2 Number Button Description

No. Description No. Description

1 1,.#? 6 6_=+

2 2!@% 7 7[];:

3 3^$* 8 8"|<

4 4( )\ 9 9>{}

5 5&/-

Video Intercom D Series Door Station User Manual

24

Note The password required 8 to 16 characters. The way to enter the password, take button 2 as an example: Press 2 to enter

the number '2' or hold 2 for 1.5 s and press 2 again to enter the character 'a'. When you have entered the password, press # to switch to confirm the

password. Press * to delete the wrong charater.

3. Press # to select language. 4. After selection, press # to finish activation.

4.2 Activate Device via Client Software You can only configure and operate the door station after creating a password for the device activation. Default parameters of door station are as follows: Default IP Address: 192.0.0.65. Default Port No.: 8000. Default User Name: admin.

Steps 1. Run the client software, click Maintenance and Management Device

Management Device to enter the page. 2. Click Online Device. 3. Select an inactivated device and click Activate. 4. Create a password, and confirm the password.

Note

We highly recommend you to create a strong password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you change your password regularly, especially in the high security system, changing the password monthly or weekly can better protect your product.

5. Click OK to activate the device.

Video Intercom D Series Door Station User Manual

25

Note When the device is not activated, the basic operation and remote operation of

device cannot be performed. You can hold the Ctrl or Shift key to select multiple devices in the online

devices, and click the Activate button to activate devices in batch.

4.3 Activate Device via Web You are required to activate the device first by setting a strong password for it before you can use the device. Default parameters of the door station are as follows: Default IP Address: 192.0.0.65. Default Port No.: 8000. Default User Name: admin

Steps 1. Power on the device, and connect the device to the network. 2. Enter the IP address into the address bar of the web browser, and click Enter to

enter the activation page.

Note

The computer and the device should belong to the same subnet.

3. Create and enter a password into the password field. 4. Confirm the password. 5. Click OK to activate the device.

Video Intercom D Series Door Station User Manual

26

5 Local Operation

5.1 Local Configuration When entering configuration page, the button is used as follows.

Table 5-1 Button Description

Button Description Button Description

2 Previous 8 Next

* Exit/Back # OK

5.1.1 Edit Network Parameters

After activating, you should edit the network parameters.

Steps 1. Hold * and # at the same time to enter the authentication page. 2. Authenticate via administrator. - Authenticate card to login. - Press # to enter the password to login.

3. Swritch to Network settings according to the tips on the page. Press # to enter the settings page.

4. Edit the parameters according to your needs. 5. Press * to save and exit.

5.1.2 Door Station Settings

Edit the parameters of the door station (including but not limited to, community No., building No., floor No., room No. and device mode).

Steps 1. Configure the parameters according to the actual needs.

Video Intercom D Series Door Station User Manual

27

Note Outer door station can only edit the Community No., Project No. and No. The No. of the main door station is 0. The No. of sub door stations should be larger than 0 and ranges from 1 to 8. Each unit should add 1 main door station. Up to 8 sub door stations can be

added to the main door station.

2. Optional: Enable the Normally Open Mode according to your needs. The door remains open.

3. Optional: Select the language. 4. After configuration, press * to save and exit.

5.1.3 Add Residents

User Management

You can add, edit and delete the informations of the users.

Steps 1. Hold * and # at the same time to enter the authentication page. 2. Authenticate via administrator. - Authenticate card to login. - Press # to enter the password to login.

3. Switch to User Management according to the tips on the page. 4. Press # to enter the settings page.

Add Users

You can add cards, permissions and room No. for the users.

Steps 1. Select +Add, and press # to enter the adding page. 2. Edit the room No. 3. Add cards.

1) Switch to the card and press # or present cards on the card reading area to add.

Video Intercom D Series Door Station User Manual

28

2) Enter the card No. manually or present the card on the card reading area to get the card No. automatically.

3) Press # to add. 4. Switch to the permisson and press # to set. 5. Press * to save and exit.

5.1.4 About

You can view the device model, system version and QR Code of the device.

Steps 1. Hold * and # at the same time to enter the authentication page. 2. Authenticate via administrator. - Authenticate face/card/fingerprint to login. - Press # to enter the password to login.

3. Swritch to About according to the tips on the page. 4. Press # to enter the page.

5.2 Video Intercom Operation

5.2.1 Call Resident

The door station can work as main/sub door station, and outer door station, which correspond to different calling resident modes respectively.

Call Resident from Main/Sub Door Station Press any digit button on the main/sub door station page to enter the calling page. Enter the room No. and press call button.

Call Resident from Outer Door Station Press call button on the outer door station page to enter the calling page . Enter Community No. + Building No. + # + Unit No. + # + Room No. and press call button to call resident.

Video Intercom D Series Door Station User Manual

29

Note

When Unit No. is one, it can be omitted. When Unit No. is omitted, Community No. must be omitted at the same time.

5.2.2 Call Center

Press any digit button on the main/sub door station page to enter the calling page. Press center button to call., and press * to cancel during calling management center.

5.3 Unlock Door

5.3.1 Unlock by Password

Unlock by Common Password Press any digit button on the main/sub door station page to enter the calling page. Enter # + Common Password + #to unlock the door.

Unlock by Public Password

Note

Make sure you have created the public password via iVMS-4200 Client Software remotely.

Press any digit button on the main/sub door station page to enter the calling page. Enter # + Public Password + #to unlock the door.

5.3.2 Unlock by Presenting Card

Note

Make sure you have issued the card to the device.

Video Intercom D Series Door Station User Manual

30

Present the card on the card reading area to unlock.

Note

You cannot unlock the door by presenting the main card.

Video Intercom D Series Door Station User Manual

31

6 Remote Configuration via Web

6.1 Live View In the browser address bar, enter the IP address of the device, and press the Enter key to enter the login page. Enter the user name and password and click Login to enter the Live View page. Or you can click Live View to enter the page.

Figure 6-1 Live View You can start/stop live view, capture, record, audio on/off, two-way audio, etc. The stream type can be set as main stream or sub stream. For IE (Internet Explorer) or Google users, the device support two-way audio

communication.

Note

Live View function may vary with different models. Please refer to the actual product.

6.2 User Management You can add, delete or search the information of the user. Click User to enter the settings page. Click Add and enter the username, floor No. and room No. to add. Click Edit to modify the informations of the user.

Video Intercom D Series Door Station User Manual

32

Check the box of the user and click Delete to delete the selected user. Enter the keyword and click Search. The information will display in the list.

6.3 Device Management You can manage the linked device on the page. Click Device List to enter the settings page.

Add Device Click Add to add the indoor station or sub door station. Enter the

parameters and click OK to add. Click Import. Enter the information of the device in the template to

import devices in batch.

Export Click Export to export the information to the PC.

Synchronize Click Synchronize to synchronize the information.

6.4 Parameters Settings Click Configuration to set the parameters of the device. Remote configuration in iVMS-4200 and Batch Configuration Tool is the same as that in Web. Here takes the configuration in web for example.

Note

Run the browser, click Internet Options Security to disable the Protected Mode.

6.4.1 Local Parameters Settings

You can configure the parameters of the live view, record files and captured pictures. The record files and captured pictures are the ones you record and capture by using

Video Intercom D Series Door Station User Manual

33

the web browser. You can also set and view the saving paths of the captured pictures and recorded videos on the PC that running the web browser.

Live View Parameters Stream Type

Set the stream type as Main Stream or Sub-stream. Play Performance

Set the live view performance to Shortest Delay, Balanced or Fluent. Auto Start Live View

Check Yes to enable the function. Image Format

Select the image format for picture capture. Click Save to enable the settings.

Record File Parameters Record File Size

Select the packed size of the manually recorded and downloaded video files to 256M, 512M or 1G. After the selection, the maximum record file size is the value you selected.

Save record files to Set the saving path for the manually recorded video files.

Click Save to enable the settings.

Picture and Clip Settings Save snapshots in live view to

Set the saving path of the manually captured pictures in live view mode.

Note

You can click Browse to change the directory for saving the clips and pictures, and click Open to open the set folder of clips and picture saving.

Click Save to enable the settings.

Video Intercom D Series Door Station User Manual

34

6.4.2 System Settings

Follow the instructions below to configure the system settings, include System Settings, Maintenance, Security, and User Management, etc. Click System to enter the settings page.

Basic Information Click System Settings Basic Information to enter the settings page. On the page, you can edit Device Name and Device No. Set the Language and System Type according to your needs. Click Save to enable the settings.

Time Settings Click System Settings Time Settings to enter the settings page. Select the Time Zone of your location from the drop-down list. Enable NTP, set the Server Address, NTP Port and Interval. Enable Manual Time Sync., set the time manually or check the Sync. with

computer time. Click Save to enable the settings.

DST Click System Settings DST to enable DST. Set the parameters according to your needs and click Save to enable the settings.

Maintenance Click Maintenance Upgrade & Maintenance to enter the settings page.

Video Intercom D Series Door Station User Manual

35

Figure 6-2 Maintenance Reboot: Click Reboot to reboot the device. Restore

Click Restore to reset all the parameters, except the IP parameters and user information, to the default settings.

Default Click Default to restore all parameters to default settings.

Export parameters: 1. Click Device Parameters to pop up the dialog box. 2. Set and confirm the encryption password. 3. Click OK to export parameters.

Import Config. File: 1. Click Browse to select the configuration file. 2. Click Import and enter the encryption password to import.

Upgrade: Click Browse to select the upgrade file.

Note

The upgrading process will last 1 to 10 minutes, do not power off during the upgrading. The device reboots automatically after upgrading.

User Management Click User Management to enter the settings page. Administrator can edit the permission for the users.

Video Intercom D Series Door Station User Manual

36

Note

We highly recommend you to create a strong password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you change your password regularly, especially in the high security system, changing the password monthly or weekly can better protect your product.

Online Users Click User Management Online Users to enter the page.

Figure 6-3 Online Users

Click Refresh to get the present information.

Arming/Disarming Information Click User Management Arming/Disarming Information to view the information. Click Refresh to get the present information.

6.4.3 Network Settings

TCP/IP Settings

TCP/IP settings must be properly configured before you operate the device over network. The device supports IPv4.

Steps 1. Click Network Basic Settings TCP/IP to enter the settings page.

Video Intercom D Series Door Station User Manual

37

Figure 6-4 TCP/IP Settings 2. Configure the network parameters. - Check DHCP, the device will get the parameters automatically. - Set the IPv4 Address, IPv4 Subnet Mask and IPv4 Default Gateway manually.

3. Configure the DNS server. 4. Click Save to enable the settings.

Port Settings

Steps 1. Click Network Basic Settings Port to enter the settings page. 2. Set the ports of the device.

HTTP Port The default port number is 80, and it can be changed to any port No. which is not occupied.

Server Port The default server port number is 8000, and it can be changed to any port No. ranges from 2000 to 65535.

3. Click Save to enable the settings.

SIP Setting

Steps 1. Click Network Basic Settings SIP to enter the settings page.

Video Intercom D Series Door Station User Manual

38

2. Check Enable VOIP Gateway. 3. Configure the SIP parameters. 4. Click Save to enable the settings.

SNMP Settings

Before You Start Before setting the SNMP, please download the SNMP software and manage to receive the camera information via SNMP port. By setting the Trap Address, the camera can send the alarm event and exception messages to the center.

Steps 1. Click Network Advanced Settings SNMP to enter the settings page.

Figure 6-5 SNMP Settings

Video Intercom D Series Door Station User Manual

39

2. Check the checkbox of Enable SNMPv1, Enable SNMP v2c, Enable SNMPv3 to enable the feature correspondingly.

3. Configure the SNMP settings. 4. Click Save to enable the settings.

Note

To lower the risk of information leakage, you are suggested to enable SNMP v3 instead of SNMP v1 or v2.

FTP Settings

Steps 1. Click Network Advanced Settings FTP to enter the settings page.

Video Intercom D Series Door Station User Manual

40

Figure 6-6 FTP Settings 2. Check Enable FTP. 3. Select Server Type. 4. Input the Server IP Address and Port. 5. Configure the FTP Settings, and the user name and password are required for the

server login. 6. Set the Directory Structure, Parent Directory and Child Directory. 7. Set the picture naming rules. 8. Click Save to enable the settings.

Video Intercom D Series Door Station User Manual

41

6.4.4 Video & Audio Settings

Video Parameters

Steps 1. Click Video/Audio Video to enter the settings page.

Figure 6-7 Video Parameters 2. Select the Stream Type. 3. Configure the video parameters.

Stream Type Select the stream type to main stream or sub stream.

Video Type Select the stream type to video stream, or video & audio composite stream. The audio signal will be recorded only when the Video Type is Video & Audio.

Resolution

Video Intercom D Series Door Station User Manual

42

Select the resolution of the video output. Bitrate Type

Select the bitrate type to constant or variable. Video Quality

When bitrate type is selected as Variable, 6 levels of video quality are selectable.

Frame Rate Set the frame rate. The frame rate is to describe the frequency at which the video stream is updated and it is measured by frames per second (fps). A higher frame rate is advantageous when there is movement in the video stream, as it maintains image quality throughout.

Max. Bitrate Set the max. bitrate from 32 to 16384 Kbps. The higher value corresponds to the higher video quality, but the better bandwidth is required.

Video Encoding The device supports H.264.

I Frame Interval Set I Frame Interval from 1 to 400.

4. Click Save to save the settings.

Audio Parameters

Steps 1. Click Video/Audio Audio to enter the settings page.

Figure 6-8 Audio Settings

Video Intercom D Series Door Station User Manual

43

2. Configure the stream type and the audio encoding type. Stream Type

Select the stream type to main stream or sub stream. Audio Encoding

The device support G.711ulaw and G.711 alaw. 3. Adjust the Input Volume, Output Volume and Speak Volume.

Note

Available range of volume: 0 to 10.

4. Click Save to save the settings.

6.4.5 Display Settings

Configure the image adjustment, backlight settings and other parameters in display settings.

Steps 1. Click Image Display Settings to enter the display settings page.

Figure 6-9 Display Settings 2. Select the Format. 3. Set the display parameters.

WDR Wide Dynamic Range can be used when there is a high contrast of the bright area and the dark area of the scene.

Brightness

Video Intercom D Series Door Station User Manual

44

Brightness describes bright of the image, which ranges from 1 to 100. Contrast

Contrast describes the contrast of the image, which ranges from 1 to 100. Saturation

Saturation describes the colorfulness of the image color, which ranges from 1 to 100.

Sharpness Sharpness describes the edge contrast of the image, which ranges from 1 to 100.

BLC Area If you focus on an object against strong backlight, the object will be too dark to be seen clearly. BLC compensates light to the object in the front to make it clear. OFF, Up, Down, Left, Right and Center are selectable.

4. Click Save to enable the settings.

6.4.6 Event Settings

Motion Detection

Motion detection detects the moving objects in the configured security area, and a series of actions can be taken when the alarm is triggered.

Steps 1. Click Event Motion to enter the settings page.

Video Intercom D Series Door Station User Manual

45

Figure 6-10 Motion Detection 2. Check Enable Motion Detection to enable the function. 3. Click Draw Area.Click and drag the mouse on the live video to draw a motion

detection area. Click Stop Drawing to finish drawing one area. Click Save to save the settings.

Clear Area Click Clear All to clear all of the areas.

Adjust Sensitivity Move the slider to set the sensitivity of the detection. 4. Click Arming Schedule to edit the arming schedule. 5. Click on the time bar and drag the mouse to select the time period. Click Save to

save the settings.

Delete Schedule Click Delete to delete the current arming schedule.

Video Intercom D Series Door Station User Manual

46

6. Click Linkage Method to enable the linkages. Notify Security Center

Send an exception or alarm signal to the remote management software when an event occurs.

7. Click Save to enable the settings.

Set Video Tampering Alarm

When the configured area is covered and cannot be monitored normally, the alarm is triggered and the device takes certain alarm response actions.

Steps 1. Click Event Basic Event Video Tampering to enter the settings page. 2. Check Enable Video Tampering. 3. Draw area.

1) Click Area Settings. 2) Click , and drag the mouse in the live view page to draw an area. 3) Optional: Click to clear the drawing area.

4. Drag the block to set the Sensitivity. The higher the value is, the easier to detect the area covering.

5. Optional: Click Linkage Method, and check the normal linkage or notify security center according to your actual needs. Normal Linkage

Set the normal alarm linkage. Notify Security Center

The alarm information is uploaded to the security center when an alarm event is detected.

6. Optional: Click or to perform the record or capture operation. 7. Click Save to save the settings.

Event Linkage

Steps 1. Click Event Basic Event Event Linkage to enter the settings page.

Video Intercom D Series Door Station User Manual

47

Figure 6-11 Event Linkage 2. Select the Major Type as Device Event or Door Event. 3. Select the type of the Normal Linkage for the event. 4. Click Save to enable the settings.

6.4.7 Intercom Settings

Device ID Configuration

Video Intercom D Series Door Station User Manual

48

Steps 1. Click Device ID Settings to enter the page.

Figure 6-12 Device ID Settings 2. Select the device type from the drop-down list, and set the corresponding

information. 3. Click Save to enable the device number configuration.

Note For main door station (D series or V series), the serial No. is 0. For sub door station (D series or V series), the serial No. cannot be 0. Serial No.

ranges from 1 to 99. For each villa or building, at least one main door station (D series or V series)

should be configured, and one sub door stations (D series or V series) can be customized.

For one main door station (D series or V series), up to 8 sub door stations can be configured.

Linked Network Settings

Steps 1. Click Intercom Linked Network Settings to enter the settings page.

Video Intercom D Series Door Station User Manual

49

Figure 6-13 Linked Network Settings 2. Set the master station IP address and master station SIP cllient Port. 3. Set the private SIP server IP address and private SIP Server Port. 4. Set the SIP Client Port. 5. Enter the password. 6. Click Save to enable the settings.

Time Parameters

Click Intercom Time Parameters to enter the page. Configure the time parameters and click Save.

Note

Maximum speaking time varies from 90s to 120s, and maximum message time varies from 30s to 60s.

6.4.8 Access Control Settings

Video Intercom D Series Door Station User Manual

50

Permission Password

Steps 1. Click Access Control Permission Password to enter the settings page.

Figure 6-14 Permission Password 2. Select the password type. 3. Change the password. 4. Set the number of doorphone. 5. Click Save to enable the settings.

Door Parameters

Steps 1. Click Access Control Door Parameters to enter the settings page.

Video Intercom D Series Door Station User Manual

51

Figure 6-15 Door Parameters 2. Select the door and edit the door name. 3. Set door contact status. 4. Set lock action time. 5. Click Save to enable the settings.

Card Security

Click Access Control Card Security to enter the settings page. Slide to enable card encryption parameters. Click Save to enable the settings.

Elevator Control

Before You Start Make sure your door station is in the mode of main door station. Only the main

door station support elevator control function. Make sure your door station has been connected to the elevator controller via

RS-485 wire if you want to use RS-485 interface.

Steps 1. Click Access Control Elevator Control to enter the corresponding configuration

page.

Video Intercom D Series Door Station User Manual

52

Figure 6-16 Elevator Control 2. Check to enable elevator control function. 3. Select an Elevator No., and select an elevator controller type for the elevator. 4. Set the Negative Floor. 5. Select the Interface Type as RS-485 or Network Interface. And enable the elevator

control. - If you select RS-485, make sure you have connected the door station to the

elevator controller with RS-485 wire. - If you select Network interface, enter the elevator controller's IP address, port

No., user name, and password. 6. Click Save to enable the settings.

Video Intercom D Series Door Station User Manual

53

Note Up to 4 elevator controllers can be connected to one door station. Up to 10 negative floors can be added. Make sure the interface types of elevator controllers, which are connected to

the same door station are consistent.

RS-485 Settings

Set the working mode to linked device.

Steps 1. Click Access Control RS485 Settings to enter the settings page.

Figure 6-17 RS-485 Settings 2. Select the No. 3. Select the working mode. 4. Click Save to enable the settings.

Video Intercom D Series Door Station User Manual

54

7 Configuration via Client Software

7.1 Edit Network Parameters To operate and configure the device via LAN (Local Area Network), you need connect the device in the same subnet with your PC. You can edit network parameters via iVMS-4200 client software.

Steps 1. Select an online activated device and click the Modify Netinfo. 2. Edit the device IP address and gateway address to the same subnet with your

computer. 3. Enter the password and click OK to save the network parameters modification.

Note The default port No. is 8000. The default IP address of the door station is 192.0.0.65. After editing the network parameters of device, you should add the devices to

the device list again.

7.2 Add Device You should add device to the software so as to configure the device remotely.

7.2.1 Add Online Device

Before You Start Make sure the device to be added is in the same subnet with your computer. Otherwise, please edit network parameters first.

Steps 1. Click Online Device to select an active online device. 2. Click Add. 3. Enter corresponding information, and click Add.

Video Intercom D Series Door Station User Manual

55

Figure 7-1 Add to the Client

7.2.2 Add Device by IP Address

Steps 1. Click +Add to pop up the adding devices dialog box. 2. Select IP/Domain as Adding Mode. 3. Enter corresponding information. 4. Click Add.

7.2.3 Add Device by IP Segment

Video Intercom D Series Door Station User Manual

56

You can add many devices at once whose IP addresses are among the IP segment.

Steps 1. Click +Add to pop up the dialog box. 2. Select IP Segment as Adding Mode. 3. Enter corresponding information, and click Add.

7.3 Remote Configuration Select the device, click to configure the parameters remotely.

7.4 Device Management Device management includes device activation, adding device, editing device, and deleting device, and so on. After running the iVMS-4200, video intercom devices should be added to the client software for remote configuration and management.

7.5 Organization Management On the main page of the Client Software, click PersonalManagement to enter the configuration page.

7.5.1 Add Organization

Steps 1. In the organization list on the left, click +Add. 2. Enter the Organization Name as desired. 3. Click OK to save the adding. 4. Optional: You can add multiple levels of organizations according to the actual

needs. 1) You can add multiple levels of organizations according to the actual needs. 2) Then the added organization will be the sub-organization of the upper-level

organization.

Video Intercom D Series Door Station User Manual

57

Note

Up to 10 levels of organizations can be created.

7.5.2 Modify and Delete Organization

You can select the added organization and click to modify its name. You can select an organization, and click X button to delete it.

Note The lower-level organizations will be deleted as well if you delete an organization. Make sure there is no person added under the organization, or the organization

cannot be deleted.

7.6 Person Management After adding the organization, you can add person to the organization and manage the added person such as issuing cards in batch, importing and exporting person's information in batch, etc.

Note Up to 2,000 persons can be added. Up to 5 cards can be added to each person.

7.6.1 Add Person

Person information is necessary for the video intercom system. And when you set linked device for the person, the intercom between intercom devices can be realized.

Steps 1. Select an organization in the organization list and click Add on the Person panel to

pop up the adding person dialog.

Note

The Person No. will be generated automatically and is editable.

2. Set basic person information. 1) Enter basic information: name, tel, birthday details, effective period and email

address.

Video Intercom D Series Door Station User Manual

58

Note

The length of person name should be less than 15 characters.

2) Click Add face to upload the photo.

Note

The picture should be in *.jpg format.

Click Upload Select the person picture from the local PC to upload it to the client.

Click Take Phone Take the person's photo with the PC camera.

Click Remote Collection

Take the person's photo with the collection device.

3. Issue the card for the person. 1) Click Credential Card . 2) Click + to pop up the Add Card dialog. 3) Select Normal Card as Card Type. 4) Enter the Card No. 5) Click Read and the card(s) will be issued to the person.

4. Link the device to the person. 1) Set the linked devices.

Linked Device You can bind the indoor station to the person.

Note

If you select Analog Indoor Station in the Linked Device, the Door Station field will display and you are required to select the door station to communicate with the analog indoor station.

Room No. You can enter the room No. of the person.

2) Click OK to save the settings. 5. Click Add to save the settings.

7.6.2 Modify and Delete Person

Video Intercom D Series Door Station User Manual

59

Select the person and click Edit to open the editing person dialog. To delete the person, select a person and click Delete to delete it.

Note

If a card is issued to the current person, the linkage will be invalid after the person is deleted.

7.6.3 Import and Export Person Information

The person information can be imported and exported in batch.

Steps 1. Exporting Person: You can export the added persons' information in Excel format

to the local PC. 1) After adding the person, you can click Export Person to pop up the following

dialog. 2) Click ... to select the path of saving the exported Excel file. 3) Check the checkboxes to select the person information to export. 4) Click OK to start exporting.

2. Importing Person: You can import the Excel file with persons information in batch from the local PC. 1) Click Import Person. 2) You can click Download Template for Importing Person to download the

template first. 3) Input the person information to the downloaded template. 4) Click ... to select the Excel file with person information. 5) Click OK to start importing.

7.6.4 Get Person Information from Device

If the added device has been configured with person information (including person details, fingerprint, issued card information), you can get the person information from the device and import to the client for further operation.

Video Intercom D Series Door Station User Manual

60

Steps Note

This function is only supported by the device the connection mothod of which is TCP/IP when adding the device.

1. In the organization list on the left, click to select an organization to import the persons.

2. Click Get from Device to pop up the dialog box. 3. The added device will be displayed. 4. Click to select the device and then click Get to start getting the person information

from the device.

Note The person information, including person details, person's fingerprint

information (if configured), and the linked card (if configured), will be imported to the selected organization.

If the person name stored in the device is empty, the person name will be filled with the issued card No. after importing to the client.

7.6.5 Change Person to Other Organization

You can move the person to another organization if needed.

Steps 1. Select the person in the list and click Change Organization. 2. Select the organization to move the person to. 3. Click OK to save the settings.

7.6.6 Issue Card in Batch

You can issue multiple cards for the person with no card issued in batch.

Steps 1. Click Batch Issue Cards to enter the dialog page. All the added person with no card

issued will display in the Person(s) with No Card Issued list.

Video Intercom D Series Door Station User Manual

61

Figure 7-2 Issue Card in Batch 2. Click Settings.

Video Intercom D Series Door Station User Manual

62

Figure 7-3 Card Settings 3. Select Card Type and Card No. Type. 4. Click OK to save the settings. Result After issuing the card to the person, the person and card information will display in the Person(s) with Card Issued list.

7.6.7 Permission Settings

Add Permissions

Steps 1. On the main page, click AccessControlInfo Access Group to enter the

page. 2. Click +Add to pop up the adding dialog box. 3. Configure the parameters.

Video Intercom D Series Door Station User Manual

63

1) Enter the Name of the permission. 2) Select the Template of the schedule. 3) Check the person to Selected according to your needs. 4) Check the device to Selected according to your needs.

4. Click Save. 5. Check the permission and click Apply All to Device.

The status of the permission displays as Applied. 6. Optional: Click Applying Status to check the details.

Modify/Delete Permissions

On the page of the permission settings, click to edit the parameters of the permission. Select one or more permissions, click Delete to remove the permissions.

7.7 Video Intercom Settings The Video Intercom Management module provides the function of video intercom, checking call logs and managing notice via the iVMS-4200 Client Software.

Note

For the user with access control module permissions, the user can enter the Access Control module and manage video intercom and search information.

You should add the device to the software and configure the person to link the device in Access Control module before your configuration remotely.

On the main page, click AccessControlInfo Video Intercom Video Intercom on the left bar to enter the Video Intercom page.

7.7.1 Receive Call from Door Station

Steps 1. Select the client software in the device page to start calling the iVMS-4200 Client

Software and an incoming call dialog will pop up in the client software. 2. Click Answer to answer the call. Or click Hang Up to decline the call. 3. After you answer the call, you will enter the In Call window.

Video Intercom D Series Door Station User Manual

64

Click to adjust the volume of the loudspeaker. Click to adjust the volume of the microphone. Click Hang Up to hang up the dialog. Click to open the door remotely.

Note One video intercom device can only connect with one client software. The maximum ring duration can be set from 15s to 60s via the Remote

Configuration of the video intercom device. The maximum speaking duration between indoor station and iVMS-4200 can be

set from 120s to 600s via the Remote Configuration of indoor station. The maximum speaking duration between door station and iVMS-4200 can be

set from 90s to 120s via the Remote Configuration of door station.

7.7.2 Live View via Door Station

Steps 1. On the main page of the client software, click Main View to enter the Live View

page. 2. In the left list of the window, double-click the device IP or click the play icon to live

view. 3. Optional: On the Live View page, control-click and select Capture to get the

picture of the live view.

7.7.3 Release Notice

You can create different types of notices and send them to the residents. Four notice types are available, including Advertising, Property, Alarm and Notice Information.

Before You Start Make sure the person has been added to the client.

Steps 1. On the video intercom settings page, click Notice to enter the page. 2. Click +Add to pop up the adding dialog box. 3. Select the person according to your needs. 4. Edit the Subject, Type and Information.

Video Intercom D Series Door Station User Manual

65

5. Click View to select the picture. 6. Click Send.

Note Up to 63 characters are allowed in the Subject field. Up to 6 pictures in the JPGE format can be added to one notice. And the

maximum size of one picture is 512KB. Up to 1023 characters are allowed in the Information field.

7.7.4 Search Video Intercom Information

Search Call Logs

Steps 1. On the Video Intercom page, click Call Log to enter the page.

Figure 7-4 Search Call Logs 2. Set the search conditions, including call status, device type, start time and end

time. Call Status

Click to unfold the drop-down list and select the call status as Dialed, Received or Missed. Or select All to search logs with all statuses.

Device Type

Video Intercom D Series Door Station User Manual

66

Click to unfold the drop-down list and select the device type as Indoor Station, Door Station, Outer Door Station or Analog Indoor Station. Or select All Devices to search logs with all device types.

Start Time/End Time Click the time icon to specify the start time and end time of a time period to search the logs.

Reset the Settings Click Reset to reset all the configured search conditions. 3. Click Search and all the matched call logs will display on this page. 4. Optional: Check the detailed information of searched call logs, such as call status,

ring/speaking duration, device name, resident organization, etc. 5. Optional: Input keywords in the Search field to filter the desired log. 6. Optional: Click Export to export the call logs to your PC.

Search Notice

Steps 1. On the Video Intercom page, click Notice to enter the page. 2. Set the search conditions, including notice type, start time and end time.

Type Select Advertising Information, Property Information, Alarm Information or Notice Information as Type according to your needs.

Start Time/End Time Click the time icon to specify the start time and end time of a time period to search the logs.

Reset the Settings Click Reset to reset all the configured search conditiions. 3. Click Search and the matched notice will display on this page. 4. Optional: Click Export to export the notices to your PC.

Video Intercom D Series Door Station User Manual

67

A. Communication Matrix and Device Command

Communication Matrix Scan the following QR code to get the device communication matrix. Note that the matrix contains all communication ports of Hikvision access control and video intercom devices.

Figure A-1 QR Code of Communication Matrix

Device Command Scan the following QR code to get the device common serial port commands. Note that the command list contains all commonly used serial ports commands for all Hikvision access control and video intercom devices.

Figure A-2 Device Command

Video Intercom D Series Door Station User Manual

68