Hikvision DS-PS1-E-WB Sounder User's Manual PDF

Pages 5
Year 2020
Language(s)
English en
1 of 5
1 of 5

Summary of Content for Hikvision DS-PS1-E-WB Sounder User's Manual PDF

DS-PS1-E-WB Wireless External Sounder

2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved. About this Manual The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version of this Manual at the Hikvision website (https://www.hikvision.com/). Please use this Manual with the guidance and assistance of professionals trained in supporting the Product.

and other Hikvision's trademarks and logos are the properties of Hikvision in various jurisdictions. Other trademarks and logos mentioned are the properties of their respective owners.

Disclaimer TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED AS IS AND WITH ALL FAULTS AND ERRORS. HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS. YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS.

Appearance1

2 Indication

This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the RE Directive 2014/53/EU, the RoHS Directive 2011/65/EU.

replacement of a battery with an incorrect type that can defeat a safeguard (for example, in the case of some lithium battery types); disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion; leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas; and a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.

LED Indication Description Buzzer

2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info

2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see:www.recy- clethis.info

Armed

Operations

Green LED flashes 7 times.Enrolled

Red LED flashes 3 times.Formatted

Red LED flashes twice.Disarmed Red LED flashes once.

Display Signal Strength

indicator turns red for 3 s.

indicator flashes red for 3 s.Disconnected

Week Signal

indicator turns orange for 3 sMedium Signal

indicator turns green for 3 s.Strong Signal

Check signal strength and select installation place Enter the signal checking mode by operating on the AX PRO.

Zone Alarm

Note: -You can sign in web client Device - Sounder - Settings or the mobile client wireless Device to adjust the volume of buzzer. -The zone alarm buzzer in volume level 3 compliants with EN certification.

Two beeps.Disarmed

One beep.Armed

Fire bell.Fire Alarm

High and low frequency alternated impulsive sound.Panic Alarm

Rapid high frequency impulsive sound.

ON

OFF

Water-Proof Transparency Cover

Buzzer

Power Cable Knock Out 12 VDC Power Terminal Power Switch

Tamper Switch

Battery Connector

GradienterIndication

Strobe Light

1

EN 50131-1:2006+A2:2017 EN 50131-4:2019 EN 50131-5-3:2017

Security Grade(SG) 2 Environmental Class(EC) IV Certified by Telefication

Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China

3 Power On 1.Loosen the set screw at the bottom of the sounder and remove the front panel. Note: You can hang the front panel on the buckle.

2. Open the water-proof cover.

3. Power the sounder on. Battery Power 1. Install four CR123A batteries according to the polarity mark. Note: The battries are included by default. 2. Close the water-proof cover. 3. Push the power switch to ON.

12 VDC Power 1. Push the Cable Knock-Out away. 2. Wire the power cable. 3. Close the water-proof cover. 4. Push the power switch to ON. Note: The 12 VDC power supply is non EN compliant.

ON

OFF

-12V+

ON

OFF

-12V+

ON

OFF

-12V+

-12V+

CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE

DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS

CHEMICAL BURNING DANGER DO NOT SWALLOW THE BATTERY KEEP NEW AND USED BATTERIES

AWAY FROM THE CHILDREN

INSTALL THE BATTERIES ACCORDING TO THE POLARITY MARK ON THE BATTERY HOLDER. THE OPPOSITE

POLARITY MAY CAUSE DEVICE DAMAGE

DO NOT REVERSE THE POLARITY OF THE BATTERY

2

Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China

Note: For power on again, push the power swith to ON at least 5 s after power off.

4 Enrollment

5 Installation

Enroll the Peripheral Locally

Enroll the Peripheral with APP

1. In the APP, tap the "Enrollment Mode" button on the control panel page to make the control panel enter the enroll- ment status. 2. Push the power switch of the peripheral to on, and it will be automatically enrolled to the control panel.

1. In the APP, tap the icon "+"and scan the QR code on the peripheral or enter the serial No. (Last 5 digit) of the peripheral. 2. Push the power switch of the peripheral to on, and it will be automatically enrolled to the control panel.

1. Log in to the APP Store, download and install App. 2. Power on the security control panel. 3. Log in the APP and tap the icon "+" . Scan the QR code or input the control panel serial No. (Last 5 digit) to add the control panel. 4. Enroll the peripheral locally, with OR code, or with serial No..

Note: for re-enrollment, you need to hold the tamper button while powering the peripheral on simultaneously.

ON

OFF

-12V+

ON

OFF

2.Loosen the set screw at the bottom of the sounder and remove the front panel. Note: You can hang the front panel on the buckle.

1. Check signal strength and select installation place Enter the signal checking mode by operating on the control panel. Signal indicator turns green for 3 s: Strong. Signal indicator turns orange for 3 s: Medium. Signal indicator turns red for 3 s: Weak. Signal indicator flashes red for 3 s: Lost.

-The additional force shall be equal to three times the weight of the equipment but not less than 50N. The equipment and its associated mounting means shall remain secure during the installation. After the installation, the equipment, including any associated mounting plate, shall not be damaged. -Install the device on the place with nonflammable surface, such as concrete wall.

!

3

Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China

ON

OFF

Tamper Switch

3.Attach the sounder to the required place with the top screw. Make the sounder horizontal by resorting to the gradienter.

4.Secure the sounder with other three screws.

5.Fix the front panel on the sounder body. Tighten the set screw to complete the installation.

4

Operation6 Formatting Hold the tamper button, and push the power switch to ON simultaneously. Release the tamper button after 8 s, and the device will starts formatting. While the formatting is completed, the red LED flashes 3 times.

Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China

Specification8

5

7 Operation Caution and Device Maintenance - All the electronic operation should be strictly compliance with the electrical safety regulations, fire prevention regula- tions and other related regulations in your local region. - Do not drop the device or subject it to physical shock, and do not expose it to high electromagnetism radiation. Avoid the equipment installation on vibrations surface or places subject to shock (ignorance can cause equipment damage). - Please make sure that the power has been disconnected before you wire, install or dismantle the device. - If smoke, odors or noise rise from the device, turn off the power at once and unplug the power cable, and then please contact the service center. - Do not drop the device or subject it to physical shock, and do not expose it to high electromagnetism radiation. Avoid the equipment installation on vibrations surface or places subject to shock (ignorance can cause equipment damage). - Do not place the device in extremely hot (refer to the specification of the device for the detailed operation tempera- ture), cold, dusty or damp locations, and do not expose it to high electromagnetic radiation. Exposing the equipment to direct sun light, low ventilation or heat source such as heater or radiator is forbidden (igno- rance can cause fire danger). - Do not aim the device at the sun or extra bright places. A blooming or smear may occur otherwise (which is not a malfunction however), and affecting the endurance of sensor at the same time. - Improper use or replacement of the battery may result in hazard of explosion. Replace with the same or equivalent type only. Dispose of used batteries according to the instructions provided by the battery manufacturer. - Do not expose the device to the corrosive gas. Otherwise the equipment damage may occur. - Do not expose the device to the explosive situation.

Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China

Frequency 868 MHz Metod Two-way communication Distance 1,6 KM Indicator Red/Green Strobe light Red/Blue (whiteon the board) Power Battery (default power supply method) or 12 VDC

Consumption Quiescent Current: 40uA Battery: Max. 3 V/4A (alerts in volume level 3 ) 12 VDC: Max. 12 V/1.3A (alerts in volume level 3 )

Low Battery Cut Off 2.45 V Voltage Range Fully charged (new) to 2.45V DC (battery)

Battery life span 4 CR123A, 3 years in work status(triggered every two weeks and alerting 90 s for each triggering)

Power switch Power switch Tamper switch Front and rear tamper-proof Piezo Decibel 102 db Max. Sound Duration 15min (900s) Operation Temperature -25 C to 60 C (-13 F to 140 F) Operation Humidity 10% to 90% Material PC+ABS Dimension (W H D) 190 200 47. 3mm .(7.48" 7.87" 1.86" Weight 606.5g Protection

Manualsnet FAQs

If you want to find out how the DS-PS1-E-WB Hikvision works, you can view and download the Hikvision DS-PS1-E-WB Sounder User's Manual on the Manualsnet website.

Yes, we have the User's Manual for Hikvision DS-PS1-E-WB as well as other Hikvision manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User's Manual should include all the details that are needed to use a Hikvision DS-PS1-E-WB. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Hikvision DS-PS1-E-WB Sounder User's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Hikvision DS-PS1-E-WB Sounder User's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Hikvision DS-PS1-E-WB Sounder User's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Hikvision DS-PS1-E-WB Sounder User's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Hikvision DS-PS1-E-WB Sounder User's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.